Operator jobs in Holland, MI

Short & Sweet: The sanitation operator is responsible for the disassembly, cleaning, sanitizing and re-assembly of cheese processing equipment. Schedule: 8 hour shifts, 10:30 PM to 7:00 AM * Weekends & Holidays are scheduled often * $1.00 shift premium between 6PM and 6AM Benefits: * Medical, Vision, & Dental Insurance * 401K & Profit Sharing * Monthly Production/Safety Bonuses * Pet, legal, & other additional insurance packages available Job Responsibilities: * Inspect ribbon of cheese for softness and extraneous. * Pack cheese. * Feed ribbon stacks of cheese onto the conveyor. * Blend cheese as required. * Maintain good housekeeping at all times, including cleaning empty tubs and weighing scrap. * Observe proper safety policies and procedures at all times. * Add slip sheets/inter-leaver sheets in-between layers of cheese in tote. * Fold bags into boxes so none is exposed when the box is closed. * Monitor quality of boxes before running through the tape machine. • Dimensions operator, perform the duties per established SOP's.• Sealer operator, perform the duties per established SOP's.• Scale operator, perform the duties per established SOP's. * Box maker, perform the duties per established SOP's. * Remove all cheese prior to sanitizing equipment, separating it into rework, redice, or scrap categories. * Reassemble and make all necessary minor adjustments to all processing equipment and verify proper equipment set up. * Clean all equipment using foam or CIP and rinse thoroughly. * Disassemble all processing equipment. * Protect all electrical panels and equipment from water damage by covering them. * Comply with all safety regulations, policies and procedures. * Notify team lead/supervisor of any potential problems, hazards, broken or damaged equipment. * Organize all parts for proper and efficient cleaning. * Pre-clean all processing equipment using scrapers and air guns and water. Minimum Job Requirements: * Must be able to work in a 24/7 operation, including weekends and holidays * Must be at least 18 years or older * Must be able to communicate effectively verbally and in writing * Must be able to lift 46 lbs. from floor to shoulder (0" - 58") and climb stairs hourly Leprino uses Psychemedics for a 90-day hair follicle drug test as part of the employee pre-employment process and also participates in E-Verify. All employees in our manufacturing facilities are required to wear Personal Protective Equipment (PPE) as mandated by their role and location.

PURPOSE/SCOPE: Perform various machine operations functions. Job Specifications/Qualifications: (Min. knowledge, skills, and abilities required) GENERAL RESPONSIBILITIES: * Run machines to established standards. * Maintain and monitor various machine functions including any coolant, scrap removal, tool changes, adjustments, and clean up. * Perform all quality control functions. * Practice and promote safety. * Sort and inspect parts as required. REQUIRED EXPERIENCE & EDUCATION: * High school diploma or equivalent experience. * Familiarity with mechanical equipment. PREFERRED QUALIFICATION: * Familiar with blueprint reading. * Familiar with use of hand tools (screwdriver, Allen wrench, etc.). REQUIRED INTERPERSONAL & BEHAVIORAL SKILLS: * Regarded as self-motivated and versatile. * Willing to participate in a team environment. PHYSICAL REQUIREMENTS AND WORKING CONDITIONS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations that do not cause an undue hardship on the company may be made to enable individuals with disabilities to perform the essential functions, as long as that would not hinder or prevent performance of duties or be of a safety concern. Physical Job Tasks: * Lifting or carrying heavy material, tooling, slides, components, parts, and scrap. * Manual material handling of tooling, parts, scrap, and raw materials. * Working around forklift traffic and vehicle traffic making sure the product is transported on time. * Handling coolants, oils, cleaners, and other materials. * Able to lift up to 38 pounds.

Job Description Grow with Welch's! Welch's is on a journey towards our bold ambition of being the global-leader of convenient, good for you fruit-based food and beverages. To turn this goal into a reality we need you and other exceptionally talented, agile, and innovative individuals who are eager to contribute to something extraordinary! At Welch's, we're not just offering a job; we're inviting you to be a part of a vibrant, authentic, and inclusive culture where you not only belong, but also have the opportunity to unleash the best, most authentic version of you. Position Summary: The General Production Labor role operates manufacturing equipment to produce high quality food and beverage products in a safe and effective manner. We are currently hiring for 2nd and 3rd shift! Pay rate starts at $19.96. Where You'll Work This role will be based out of our 24/7 manufacturing facility in Lawton, MI. What You'll Do: Operate equipment to meet department goals Move, organize, and stage ingredients Produce documentation to verify safety, quality, and production standards Observe operations to ensure schedules and quality standards are met Submit reports summarizing daily production Inspect and test production line set-ups to ensure proper equipment operation Check production equipment daily for proper cleaning and safe operation Clean and sanitize production facilities and equipment Follow the Plant Safety Program, GMP requirements and both people & food safety protocols Ensure enough supplies and ingredients for production schedules Perform other duties as assigned Who You Are: A team player who takes pride in their work High attention to detail Safety-minded with the goal to protect yourself and others Ability to understand and follow a process from start to finish Strong problem solver Required physical abilities Ability to frequently lift up to 50 pounds with or without assistance Ability and willingness to work 8+ hour shifts Ability to stand, stoop, bend, crouch for extended periods of time Ability to climb stairs, ladders, and work in an elevated environment Ability to work in varying temperatures (hot/cold) and both indoor/outdoors What You'll Need: High school diploma, GED, or equivalent is required Experience as a Production Worker, Manufacturing Associate, Material Handler, General Labor, or other Manufacturing or industrial role preferred What You'll Enjoy: Organization with a bold, clear purpose & vision for the future Inclusive Culture: Be a part of an inclusive workplace where you not only belong but also have the opportunity to be the best version of yourself Passionate Community: You are encouraged to have a voice, share your opinions, and have individual impact on the success of the business Development & Advancement: Access to LinkedIn Learning as well as both formal and informal opportunities to develop and grow your career Welch's is an Equal Employment Opportunity Employer. We are committed to the prevention of employment discrimination based on race, religion, color, sex, gender identity, national origin, age, marital status, disability and/or military or veteran status, sexual orientation or any other action covered by federal or applicable state/local laws. Welch's offers more than just a job - it's an opportunity to grow, innovate, and make a global impact with a passionate community.

Lear For You We work hard for the people who work for us. We champion our teams. We foster collaboration, inclusion, respect and excellence. What we are trying to say is we want to be more for you. We are your path to a better career, a better future, and a better you. Our teams have invented groundbreaking technologies, flawlessly manufactured millions of products and earned a long list of awards. Year after year, we are one of the World's Most Admired Companies. Our teams are the secret to our success. They are empowered, inventive and inclusive. Passionate about their craft. Driven to succeed. Because we all understand that we must work together to win. Are you ready for a better career? A better future? We're Lear For You. PRODUCTION OPERATOR GRAND RAPIDS, MI- PLAINFIELD PLANT Summary The primary role of the Production Operator is to manufacture quality products in a safe manner. Responsible for assembling and/or fitting parts together to form complete units or subassemblies at a bench or a conveyor line. May include operations requiring the use of simple hand tools and/or power or special assembly tools. The Role: Your work will include, but not be limited to: * Set up and operate machines. * Load/unload machine (may be assisted by automation or ergo aids). * Relief of fellow operators * Operate manual material handling equipment to re-stock production areas with raw material or purchased parts. * Move wheeled carts, racks, bins containing work in progress to adjacent production areas. * Inspect product quality. * Cleaning surrounding work areas * May be assigned different duties depending on plant needs. Advantages of working for Lear at the Plainfield Plant: * 401(k) * Dental insurance * Employee assistance program * Flexible spending account * Health insurance * Health savings account * Life insurance * Paid time off * Referral program * Vision insurance * Tuition Reimbursement Your Qualifications: * Ability to frequently lift up to 45 lbs. * Ability to frequently bend, reach or twist. * Ability to frequently lift, transfer at waist height 30lbs. * Ability to stand and/or walk long periods of time. * Must pass a drug and alcohol screen Bonus If You Have: * 2 years of manufacturing experience * Welding experience Schedule: * Monday - Thursday * 4 - 10-hour shifts Shifts: * 1st shift: 5:30am-4pm * 2nd shift: 4pm-2:30am * Both shifts have a 30-minute unpaid lunch and two 15 minute paid breaks Lear Corporation is an Equal Opportunity Employer, committed to a diverse workplace. Applicants must submit their resume for consideration using our applicant tracking system. Due to the high volume of applications received, only candidates selected for interviews will be contacted. Candidates must be legally authorized to work in the United States without sponsorship. Unsolicited resumes from search firms or employment agencies, or similar, will not be paid a fee and will become the property of Lear Corporation. Location Code: 0945 Nearest Major Market: Grand Rapids

Job Description By separating the useful from the harmful, Mann + Hummel is providing key technologies to help enable a cleaner planet. Because when it comes to cleaner mobility, air, and water, there is no mine or yours... there is only ours. As a global filtration company, they are dedicated to developing top solutions for vehicle and industrial applications using clean air and sustainable water management. As a Production Operator for Mann + Hummel, you will be responsible for assembling production components and ensuring customer requirements are met. A typical day as a Production Operator includes: Assembling product and operating machinery according to standard rates and customer requirements Performing and documenting quality checks Verifying proper cell set up by ensuring the correct parts are running and verifying barcodes/lot numbers Must be able to read, write and speak English. Counting and packaging inventory into containers for shipment worldwide Practicing and participating in all 5S activities Let's chat about the Production Operator role if you: Can spot a flaw from a mile away thanks to your keen eye for detail Are mechanically inclined and like working with your hands Can work well with others as well as independently Prefer detailed processes and a steady pace Would rather be on your feet all day than behind a desk Don't mind the workout that comes with occasionally lifting up to 50 lbs Have basic math skills including adding, subtracting, dividing, computing ratios, and interpreting bar graphs Have positive and professional written/verbal communication skills Have a high school diploma and previous manufacturing experience (not required, but preferred!) Understand the importance of a safe and clean work environment Enjoy the extra cash that comes with working overtime Have reliable transportation to get you to work on time every day We offer Production Operators: Full time work on all shifts (1st: 7 am - 3 pm, 2nd: 3 pm - 11 pm, 3rd: 11 pm - 7 am) A pay rate of $16.25-17.50/hour Entry-level, temp to hire opportunities A pay increase, benefits package, 401(k) match, and more upon hire-in A bright, clean, and positive working environment A $100 bonus when you refer a friend to WSI By submitting your application for this position, you are agreeing to receive communication from WSI, which may include calls, texts, and emails. You have the option to unsubscribe from email communications or remove yourself from SMS messaging by replying 'stop' at any time.

Job Description CDR ProSource is seeking an experienced Machine Cutter Operator in Grand Rapids, MI to join a tight-knit team at a small company with a great culture and excellent work-life balance. Job Details Job Type: Full-Time Job Location: Grand Rapids, MI 49548 Pay Rate: $17.00/hour with opportunity for growth Schedule: Monday-Friday 7:00 AM - 3:30 PMKey Responsibilities Set up and operate die cutting equipment to meet daily production goals Load materials and monitor machine for accuracy, quality, and safety Inspect finished products to ensure they meet specifications Use measuring tools (e.g., ruler, tape measure,) to ensure precision Perform basic machine duties and cutting of materials Ability to lift up to 50 lbs and bend/stoop frequently throughout the shift Comfortable working in a hot environment at times Qualifications Experience operating die cutting or similar machinery preferred Must be able to accurately use measuring tools such as tape measures, rulers, etc. Strong attention to detail and mechanical aptitude Ability to lift to 50 lbs and stand for extended periods Team player with a strong work ethic and safety mindset

Job DescriptionSalary: $30 - $35/hr Do you want to make some extra money over the winter? Do you have experience with snow equipment (loader or skid steer, or other)? DeHamer is looking for someone that fits our culture, is aligned with our values, and has the ability to join and help our snow team! At DeHamer Landscaping we believe that people matter as reflected in our Mission [What we do], our Vision [our Why] and our Values [Who we are becoming]. We hold firm that these are a crucial part of day-to-day work and hold us accountable for where we are headed! MISSION: A team focused on sharpening each other in order to serve our customers with excellence. VISION: Empower everyone we meet to build better lives in order to reflect Gods beauty throughout the world. VALUES: Desire to be great Excellent Attitude Hardworking Attention to Detail Motivated Exceptional Customer Service Do TheRight Thing Every time Responsibilities: Operate company provided snow plowing equipment to remove snow and ice from both commercial and residential roadways, parking lots, and other designated areas. Maintain accurate records of plowing routes, hours worked, and materials used. Communicate with dispatch and supervisors regarding conditions, equipment issues, and completed tasks. Follow all safety protocols and guidelines to ensure safe operations of equipment. Maintaining good attendance and arriving as promptly as possible for each snow event you are called for. Hours will typically be between 11:00pm to 8:00am. We are also hiring a few daytime operators. Please note: hours and times could fluctuate more or less based on routes, snow event, and/or weather conditions. Requirements: Must have reliable transportation to and from loader location. Previous experience operating salt spreader or similar heavy machinery preferred. Ability to work flexible hours, including nights, weekends, and holidays, as required by weather conditions. Strong attention to detail and ability to work independently with minimal supervision. Excellent communication skills and commitment to safety. Must be 18 years or older to work nighttime hours. Keep in Mind: A seasonal winter position can easily lead to a seasonal spring or full-time position. Please let us know if you are looking for year-round employment. Benefits: Competitive hourly wage with overtime opportunities. Access to various types of equipment to train on and improve skills. Weekly pay! Training and safety equipment provided. Opportunity to work in a supportive and team-oriented environment. DeHamer Landscaping [Company] Hiring Terms and Conditions: Applications must be completed via our website at*************************************** are active/validfor 30 days. After 30 days, the applicant must reapply in person or via our website:*************************** It is the responsibility of the applicant to keep track of the time schedule for applications. The Company will not notify you of an applications expiration. For your information: We base our hiring decisions on a variety of factors, including skills and ability to perform the job, prior employment with us, employment references as to character and willingness to work, willingness to accept the offered salary, and personal interviews. Further, our need to hire may change without notice as business conditions change. We do not discriminateon the basis ofrace, sex, color, religion, age, national origin, disability, or any other status protected by law. By Submitting an ApplicationI agree to the following: I authorize the Company to make any necessary investigations into my personal history and authorize any former employer, educational institution, law enforcement agency, government agency, financial institution, or other person having personal knowledge about me to supply the Company or its authorized representative with any information concerning my background. Ireleasefrom liability and hold harmless any individual or agency supplying this information to the Company or its authorized representative. I answered every question on the application completely, truthfully, and correctly. I understand that the application is not an offer, promise, or contract of employment, either expressed or implied. My employment would be at-will and could be terminated by either the Company or me at any time, with or without notice or reason. I understand that I may be required to pass a pre-employment physical, drug screen, and motor vehicle record check, and if hired, I will be subject to the Companys drug and alcohol testing policy during my employment. The information contained in this application is true and complete to the best of my knowledge and belief. I understand that, if offered a position, any false or inaccurate information or misrepresentation of fact or omission of information requested as stated or implied, given in my application, interview(s), or any other employment form may be sufficient reason not to hire me and maybe the reason for dismissal. I understand that, if hired, I will be required to provide documentation of both my identity and employment eligibility in the United States in accordance with the Immigration Reform and Control Act of 1986. Iunderstand,that, if hired, my employment will be subject to various guidelines, rules, and regulations of the Company as stated in the Employee Handbook, any policy and procedure manual, or other communications to employees. I further understand that the Companys policies and procedures are subject to modification without notice.DeHamerLandscaping isan Equal Opportunity Employer and doesnot discriminate against any individual in any phase of employment in accordance with the requirements of local, state, and federal law. The Company also provides reasonable accommodations to qualified individuals with disabilities in accordance with the Michigan Persons with Disabilities Civil Rights Act, and applicable local, state, and federal law. Under Michigan law, if you need accommodation, you must notify the Human Resources office in writing within 182 days after you knew or reasonably should have known of the need. Failure to notify Human Resources in a timely manner may result in the loss of legal rights under Michigan law. I agree that any lawsuit or claim against the Company arising out of my employment or termination of employment (including, but not limited to, claims arising under state, federal, or local civil rights laws) must be brought within the following time limits or be forever barred: (a) for lawsuits or claims requiring a Notice of Right to Sue from the EEOC, within 90 days after the EEOC issues that Notice; or (b) for all other lawsuits and claims, within (i) 180 days of the event(s) giving rise to the claim, or (ii) the time limit specified by statute, whichever is shorter. I waive any statute of limitations that exceeds this time limit. MY ELECTRONIC SUBMISSION OF THE APPLICATION CERTIFIES THAT I HAVE READ AND AGREE WITH THE TERMS OF HIRE.

The Four Slide Machine Operator is responsible for operating machines to automatically form, cut, punch, and assemble metal strip and wire by action of opposing rams and tools to fabricate precision metal parts by performing the following duties. Also, assumes responsibility for general housekeeping duties and striving toward continuous improvement. ESSENTIAL FUNCTIONS Identify all the major components of a slide forming machine. Perform preventive maintenance of all machine lubrication systems. Confirm proper operation of all safety devices. Clean machine and surrounding area. Apply and conform to all SPC documentation. Reset machines to achieve specified product dimensions. Stock up machine. Sharpen cutoff and reset to product dimensions. Verify operation of all sensor devices. Complete shift's production records (log book). Pull tooling out of machines. Setup and perform the inspection of profiles in shadow and reflection using optical comparator. Inspect sample parts using precision measuring instruments. Apply and conform to all Job Instructions (QJI's). All other responsibilities as assigned. COMPETENCIES Attention to detail Team player Flexibility and Adaptability Willingness to learn and improve EDUCATION & EXPERIENCE One year certificate from a college or technical school, or 3-6 months related experience and training. Able to use precision measuring instruments such as micrometers comparator, calipers. Ability to add, subtract, multiply, and divide in various units of measure using whole numbers and decimals. Basic computer skills. TECHNICAL SKILLS & ABILITIES Able to use precision measuring instruments such as micrometers comparator, calipers. Ability to regularly lift 10 pounds and up to 25 pounds frequently. Ability to add, subtract, multiply, and divide in various units of measure using whole numbers and decimals. SOFT SKILLS Clarity of communication, speech and writing Dependability Adaptability & Trustworthiness Trustworthiness PHYICAL DEMANDS Standing / walking for long periods of time Stooping Repetitive motion Lifting - frequently lift and/or move up to 10 - 25 pounds and occasionally lift and/or move up to 50 pounds. Reaching Workplace chemicals WORK ENVIRONMENT The work environment characteristics described below are representative of those a team member may encounter while performing the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Regular exposure to moving mechanical parts. Noise levels in the work environment are typically moderate. Although hearing protection is not required, it is available upon request. Benefits: Medical - 1st of the month following hire date. Dental, Vision, Short Term Disability, & Life Insurance Free ASPC Health and Wellness Clinic - located in Grand Haven $100 annually for safety boots Prescription safety glasses program Paid Holidays & your birthday is a paid holiday. Automatic Spring Products Corporation is an Equal Employment Opportunity and Affirmative Action Employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, marital status, protected veteran status, or disability status. We are committed to the full inclusion of all qualified individuals and will take the necessary steps to ensure reasonable accommodation is provided for those with disabilities throughout the application and interview process, as well as during employment.

Who is Thornapple Excavating? Over the last 40 years, Thornapple Excavating has expanded to become one of the most well-known names in commercial excavating in West Michigan. The organization strives to be a leader in earthwork, utility installation, and other commercial excavating services. With a strong work ethic and attention to detail, customers can count on Thornapple Excavating, Inc. to deliver a high-quality product the first time, every time. Job Responsibilities: · Operate an excavator while digging for a pipe crew safely and efficiently. · Read and understand blueprints to comprehend the utility and site plan. · Communicate with site supervisor or foreman about the site-specific specifications and requirements or general plans. · Communicate with the rest of the crew to help keep the site running safely and efficiently. · Perform general maintenance on equipment including inspecting, fueling, greasing, and cleaning tracks daily. · Clean and maintain equipment inside and out. · Adjust to seasonal weather conditions and work for up to 12 hours per day. · Willingness and ability to do what it takes to help get the job done, including operating a different piece of equipment or helping laborers when a situation demands it. · Knowledge and understanding of commercial excavating and grades. · Consistently show up on time and ready to work. · Desire to keep safety in the front of your mind at all times. Job Qualifications: · 2+ years of experience working with a pipe crew. · 2+ years of experience operating heavy equipment. · Must have a firm understanding grades and commercial earthwork. · Must be safety-minded and have a strong work ethic. · Ability to perform your work with limited direction / supervision and have the knowledge of how to prepare, install, and maintain the work and equipment. · Comfortable working in a high-stress environment and willing to take constructive criticism. · Be willing and able to work with crew members and open to alternative ways of getting things done. Job Type: Full-time Benefits: 100% Employer Paid Medical, Dental and Vision Insurance 100% Employer Paid Employee Assistance Program (EAP) 401K with Company Match Company Outings Paid Holidays and Paid Time Off Referral program Schedule: Day shift Monday to Friday Supplemental pay types: Bonus pay Ability to commute/relocate: Greater Grand Rapids, MI Education: High school or equivalent (Preferred) Experience: Commercial Pipe Crew: 2+ years (Preferred) Heavy Equipment Operation: 2+ years (Preferred) License/Certification: Driver's License (Required) Work Location: Multiple locations

Milliken & Company is a global manufacturing leader whose focus on materials science delivers tomorrow's breakthroughs today. From industry-leading molecules to sustainable innovations, Milliken creates products that enhance people's lives and deliver solutions for its customers and communities. Drawing on thousands of patents and a portfolio with applications across the textile, flooring, chemical and healthcare businesses, the company harnesses a shared sense of integrity and excellence to positively impact the world for generations. Discover more about Milliken's curious minds and inspired solutions at Milliken.com and on Facebook, Instagram and LinkedIn. POSITION OVERVIEW The Chemical Operator is responsible for the set up and operation of production equipment in their assigned production area used to produce microencapsulated products in a safe and efficient manner. The role utilizes both automated and manual systems to add raw materials, initiate and monitor the process to transform the raw materials into finished product. Several actions require manual operator actions that include obtaining samples for testing, manual material additions, and documentation of critical process steps. JOB RESPONSIBILITIES Safe handling of equipment and materials understanding the hazards and proper utilization of PPE Maintain on time production schedule by coordinating daily activities Accurate and timely in completion of tasks and documentation Effective communication with team members and management Work overtime to cover vacancies/vacations and meet Customer requirements, including weekends Promote teamwork by assisting other where and when needed Train new or less experienced team members Cross train to other processes and positions for business continuity and flexibility Operate equipment in accordance with SOP's Observe, adjust, and monitor equipment to ensure safety, quality, and efficient operation Complete manual operations as required by the process Document process critical data timely and accurately Issue materials and complete orders in Deacom Maintain 5S standards Participate in continuous improvement efforts Perform basic care, housekeeping and maintenance of equipment and work area Communicate operational needs within team and with management Attend all plant meetings and complete all trainings on time Carry out additional duties as assigned Ability to occasionally push, pull and carry up to 50 pounds Ability to wear a respirator as required by the task being performed or chemical safety data sheets. Work safely around and appropriately handle hazardous chemicals around plant. SAFETY - Adhere to all plant safety policies and compliance regulations. Actively participate in the safety process through completing of safety audits, participating in safety projects, identifying Site Hazards and contributing to safety improvements, and being an attending member of a safety team. Complete annual safety training as required. QUALITY - Become familiar with, understand and comply with Milliken Quality Policy, Standard Operating Procedure(s) (SOPs), relevant ISO 9000 standards and Company Policies that are applicable to this position. RESPONSIBLE CARE: a. Be aware of the relevant requirements of the Responsible Care Management System (RC-14001) and follow plant procedures to ensure compliance to requirements. b. Understand the RC-14001 Significant Aspects of your job and help ensure controls are in place to reduce or eliminate negative impacts. c. Take actions and identify and communicate ideas to minimize waste, prevent pollution and conserve energy. HAZARDOUS WASTE HANDLING - All associates who handle hazardous waste shall be given an overview of the regulations and company policies regarding the management of hazardous waste. The hazardous waste handlers shall receive detailed instruction on the proper handling, collecting, labeling, and transporting of hazardous waste as outlined in RCRA and OSHA regulations. Instructions shall also include whom to notify in case of a spill and proper procedures for spill response. Educational requirements include the ability to understand and carry out oral and written instructions. Instructions on handling hazardous waste shall come from the hazardous waste manager or appropriate designee. ENVIRONMENTAL, HEALTH, SAFETY & SECURITY RESPONSIBILITIES Understand the relevant requirements of the Responsible Care Management System (RCMS) and RC-14001 certification. Understand the importance of conformance to the Environmental, Safety and Responsible Care Policies, procedures, and the requirements of the RCMS. Understand the significant environmental impacts associated with their work activities and help ensure controls are in place to reduce or eliminate negative impacts. Understand the potential consequences of deviation from specified operating procedures. Immediately report any accidents and releases per the company escalation protocol. Comply with all environmental, health, safety, and security rules; Environmental, Safety, and Responsible Care policies and programs established by the company to the extent of training received. Recognize that adhering to job responsibilities and procedures regarding environmental, safety, security, and health is a condition of employment. Contribute to continuous improvement of the plant environmental, health, safety, security, and Responsible Care performance and programs. QUALIFICATIONS - REQUIRED High school diploma or General Education Degree (GED) Accountability - Ability to accept responsibility and account for actions Customer Orientated - Ability to meet or exceed customers' needs while following company procedures Detail Orientated - Ability to pay attention to all details of a project or task and the ability to perform work accurately and thoroughly Tactful - Ability to show consideration for and maintain good relations with others Working Under Pressure - Ability to complete assigned tasks under stressful situations Honesty/Integrity - Ability to be truthful and be seen as credible in the workplace Flexibility - Ability to work through change while maintaining a positive attitude The successful candidate will have strengths in the following: Prior experience in a manufacturing environment is strongly preferred Experience with Microsoft software applications helpful. Keyboarding proficiency and general computer knowledge/experience preferred Milliken is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to actual or perceived race, color, creed, religion, sex or gender (including pregnancy, childbirth or related medical condition, including but not limited to lactation), sexual orientation, gender identity or gender expression (including transgender status), ancestry, national origin, citizenship, age physical or mental disability, genetic information, marital status, veteran or military status or any other characteristic protected by applicable law. To request a reasonable accommodation to complete a job application, pre-employment testing, a job interview, or to otherwise participate in the hiring process, please contact ******************************.

Keep the Message Moving - One Page at a Time Are you a skilled machine operator who finds purpose in precision, productivity, and safety? At Our Daily Bread Ministries, we're more than a global publishing ministry, we're a Christ-centered team on mission to make the life-changing wisdom of the Bible understandable and accessible to all. As a Print Services Operator Level 2, you'll play a vital role in producing and delivering Scripture-based resources to people around the world. From bindery and finishing to packaging and fulfillment, your work will help ensure that every devotional, book, and Bible resource is produced with excellence and care. If you enjoy working with your hands, solving problems, and being part of something bigger than yourself, this is the opportunity you've been waiting for. What You'll Do Run the Machines That Fuel Ministry: Operate a variety of finishing, mailing, and fulfillment equipment including cutters, folders, stitchers, inserters, and boxers with precision and speed. Maintain and Troubleshoot: Perform regular upkeep, cleaning, and minor adjustments. Quickly identify and troubleshoot malfunctions to keep production flowing smoothly. Support Fulfillment and Quality: Assist in warehousing and order packaging, ensuring accurate labeling, shipping, and quality control for every item that leaves our facility. Keep Track and Stay Sharp: Use production systems (Avanti Slingshot, WMS, etc.) to log time and track inventory. Maintain accurate paperwork and communicate production data clearly. Adapt and Contribute: Work flexibly within a fast-paced print environment, jumping in where needed and adapting to new systems, processes, and technologies. What You Bring One year of technical training or equivalent experience in machine operations Mechanical aptitude, attention to detail, and a strong work ethic Two years of experience in a high-volume production environment Basic computer skills and familiarity with production/scheduling systems Track record of safety, quality, and on time performance Ability to complete HILO training and obtain forklift license Ability to meet the physical requirements of the job such as standing, repetitive motion, bending, pulling, lifting, and twisting. A life marked by biblical values, spiritual maturity, and a commitment to growing in Christ Other Training (Provided) and Requirements Completion of ODBM Print Services Operator Level 1 Training Completion of ODBM Print Services Machine Training Program Why Join Our Daily Bread Ministries? Mission-Focused Work: Every order you complete helps someone encounter God's Word in a tangible way. Christ-Centered Culture: Join a team that serves, prays, and grows together-with weekly Chapel, spiritual encouragement, and a shared passion for God's Word. Opportunity to Grow: Advance your skills, training, and certifications in a supportive, safe, high-impact production environment. Comprehensive Benefits: Enjoy competitive health coverage, 401k & employer match, tuition scholarship opportunities for you and your family, summer schedule adjustment, Chaplain services, and more. Your Skills. His Message If you're ready to put your machine and production talent to work for a greater purpose, we'd love to hear from you.

**The Best Teams are Created and Maintained Here.** At BrightView, the best teams are created and maintained here. If you are searching for your next fulfilling career, picture yourself on a best-in-class team where you can grow to be your brightest. We're looking for a Snow Equipment Operator for one of the two Columbus Branches. Can you picture yourself here? **_THE PAY RANGE FOR THIS ROLE IS $25 - $30 PER HOUR. YOUR PAY RATE WILL BE DETERMINED BASED ON PREVIOUS APPLICABLE WORK EXPERIENCE AND ANY CERTIFICATIONS/LICENSES YOU HOLD._** **Minimum Requirements:** + **Valid Driver's License** (Required) + **2+yrs experience with skid steers, backhoes, wheel loaders** **Here's what you'd do:** The Snow Equipment Operator must be interested in learning to do all aspects of snow removal during the winter. **You'd be responsible for:** + Removing snow using a snow plow and heavy equipment for several hours at a time, depending on the amount of snowfall + Being available each time it snows and report either to a central location or directly to the jobsite + Removing snow in appropriate locations, avoiding piling it on trees, shrubs, fire hydrants or sidewalks + Reporting any concerns or incidents to your direct Supervisor + Filling out a job sheet as soon as you are finished working after each snow removal operation + Participating in maintaining a safe and secure work environment for team employees and clients by adhering to company safety policies + Being aware of safety issues or concerns, and report them to the appropriate Supervisor + Performing other tasks as assigned by supervisor/manager **You might be a good fit if you have:** + High School Diploma or GED + Valid Driver's License and the ability to drive to a variety of work locations in assigned territory + Reliable transportation to and from any work site **And while not mandatory, it would be great if you also have:** + Prior experience operating snow plow equipment + Ability to participate in routine maintenance of equipment + Experience working efficiently in a production-driven / fast paced environment + Physically able to work outside, sometimes in extreme weather conditions with sporadic hours based on a snow event + Ability to lift 50 pounds + Ability to climb in and out of equipment + Ability to sit for long periods of time + Ability to safely operate equipment + Ability to communicate effectively + Willing to dress appropriately for all weather conditions + Able to work overnight in the winter month + Dependability **Here's what to know about working here:** Here at BrightView, we're as passionate about caring for our clients as we are about caring for each other. Though we're the nation's leading landscape company, we maintain a small company feel and supportive environment that makes our team members feel at home. If you're looking to join a team of talented go-getters who tackle big vision projects other companies could only dream of, you just might have found your match. With our range of services, including landscape design, development, maintenance and enhancements, there's no limit to what we can do, and what you can achieve. **Growing Everyday** Like the communities we serve, you are on a constant path of discovery to shape your career and personal development. In addition to best-in-class opportunities and competitive salary, you may be eligible for benefits and perks like: + Paid time off + Health and wellness coverage + 401k savings plan **Start Your Bright New Career Journey** _BrightView is an Equal Employment Opportunity and E-Verify Employer._ **_BrightView offers a suite or health, wellness, and financial benefits to full-time team members. Benefits offerings for full-time team members include medical, dental, and vision insurance, ancillary and voluntary products, a 401k savings plan with employer contributions, and 6 to 9 company paid holidays per year. Employees may also be eligible to receive paid time off for vacation and/or sick leave, tuition reimbursement, and/or potential variable pay opportunities based on position and performance. A detailed benefits package will be provided during the interview process_** _._ _It's Not Just a Team. It's One BrightView._

Wolverine Lawn Services is hiring experienced Heavy Equipment Operators to join our Snow & Ice Management team for the 2025-2026 winter season. Operators are responsible for efficiently clearing snow from commercial properties using loaders, skid steers, and other heavy equipment to maintain safe and accessible conditions. This is a hands-on, fast-paced role for professionals who take pride in operating equipment safely, producing high-quality results, and working as part of a reliable, team-oriented environment. Compensation: $22 - $35 hourly Responsibilities: Operate loaders, skid steers, and other heavy equipment during snow events. Push, pile, and relocate snow according to site layouts and safety standards. Perform pre- and post-shift inspections, monitoring fuel, fluids, and warning lights. Communicate with dispatch and Zone Leaders to ensure smooth, efficient operations. Record completion logs and upload site photos using company software. Maintain safety and professionalism while representing Wolverine on every job site. Qualifications: What We're Looking For Prior experience operating loaders, skid steers, or other heavy equipment (snow removal experience preferred). Strong spatial awareness and ability to operate safely in low-visibility conditions. Availability during snow events, including overnights, weekends, and holidays. Valid driver's license and reliable transportation. Dependable, detail-oriented, and willing to work as part of a fast-paced team. About Company Wolverine Lawn Services is a year-round commercial and residential grounds partner serving West Michigan. We're known for our professionalism, reliability, and high standards across lawn care, landscaping, and snow & ice management. Our mission is simple: deliver consistent, quality results that keep client properties safe, functional, and looking their best-no matter the season. We invest in our people through hands-on training, advancement opportunities, and a culture built on teamwork and accountability. Our crews take pride in hard work, attention to detail, and doing things the right way. When you join Wolverine, you're joining a team that values growth, respect, and craftsmanship in everything we do.

Job Description: 1st and 2nd Shift Operator Jimdi Plastics manufactures plastic parts in a variety of industries. We are seeking a skilled and motivated individual to join our team as a 1st or 2nd Shift Operator. Come join our team and enjoy a 4/10 workweek with occasional overtime on Fridays! In this role, you will be responsible for ensuring the smooth operation and optimal efficiency of our manufacturing during second shift. Responsibilities: Operate and maintain various products being produced by our manufacturing machines. This includes inspecting and packaging products at the press. Some jobs will require assembly. Monitor machine operations to identify any issues or defects and take immediate corrective action as necessary. Conduct regular quality checks on products during production. Collaborate with other team members to meet production targets and ensure timely completion of orders. Ensure compliance with all safety protocols and guidelines to maintain a safe working environment. Maintain accurate records of production data, including accurate inventory entry, and product yields. Keep work area clean and organized. Requirements: Ability to read and interpret machine operating instructions, Good understanding of quality control principles and procedures. Excellent attention to detail and ability to maintain accurate records. Ability to work independently with minimal supervision. Strong communication and teamwork skills. Able to lift up to 35 pounds Able to stand for extended periods of time Able to climb stairs, bend, twist, kneel, and crouch. Jimdi Plastics offers a variety of benefits including: Medical Dental Vision Employer paid life insurance + voluntary life insurance Short and Long-term disability Jimdi Plastics also offers several complimentary benefits to its employees: Employee assistance plan Hearing aid discount program ID theft protection program Travel assistance Will preparation Financial Assistance resource Caregiver support resource Join our team as a 1st or 2nd Shift Operator and play an essential role in ensuring the smooth operation of our manufacturing processes. Apply now to become a part of our dynamic and growing organization. Jimdi Plastics participates in E-Verify Jimdi Plastics participa en E-Verify

Join the industry leader to design the next generation of breakthroughs This role is for a chemical operator position at the Solstice Advanced Materials Muskegon Michigan Research Chemical site. This position may be on first, second, or third shift (8 hours), M-F with overtime as required by the business. . **Key Responsibilities** + Safely perform required tasks efficiently by following standard operating and job safety analysis procedures. + Perform combination of manual and/or automated tasks necessary to efficiently package finished product into containers of various sizes. + Perform a variety of tasks in a fast-paced chemical environment, that include- counts & weights against documents, handling and packaging of various chemicals, maintaining area cleanliness. + Ability to lift up to 35lbs. + Safe handling of hazardous chemicals. + Ability to wear a full-face respirator while climbing stairs and ladders as well as understanding per OSHA guidelines (facial hair is not permitted). + Must be able to work 1st, 2nd or 3rd Shifts + Will need to take and display ownership and sense of urgency in meeting the department daily objectives. + Learn & perform all operations involved with prepping, sampling and packaging of products. + Operate in a manner to meet Honeywell safety goals. + Adhering to all site and departmental HS&E policies and procedures. + Developing the ability to recognize hazards and learn the 4 critical errors to avoid putting yourself in harm's way. + Supporting the Safety Structure Process by completing APT's (Accident Projection Technique), JSA's (Job Safety Analysis), + Safety Inspections, TSO's (Task Safety Observations), and What If drills as assigned. + Utilizing the "Safety Stop" procedure if a job cannot be started and/or completed safety. + Responding to safety incidents per site and department procedures (Requires being able to wear the SCBA (Self + Contained Breathing Apparatus) for certain situations). + Manage hazardous waste in a manner to meet site and departmental procedures and to maintain regulatory compliance. + Keep proper, accurate, legible, neat and up-to-date records. + Utilize the "Q-Stop"/Non-conforming process if a quality defect is suspected or identified. + Promote, participate in and support Honeywell Operating System (HOS) by: + Actively participating in the continuous improvement process (Kaizen/PDCA). + Developing the ability to conduct/complete Rapid Problem Solving & Root Cause Analysis. + Utilizing the visual management boards and escalation process per standard work.Being engaged in the Tier and PDCA meetings. + Position Responsibilities: + Operates hand or power tools, forklifts, computers, and production equipment. + Performs team duties that may include managing meetings, communicating with other teams or individuals, managing documentation, records, and scheduling personnel.Is responsible for maintaining Safety, Environmental Quality, Product Quality, Productivity, and Inventory accuracy for their area. + Arrange, load, move, package, handle, transfer, label, sample, and document process materials. + Set up, adjust, clean, take apart, put together, or perform minor maintenance, on machines, or equipment. + Verifies equipment, or areas, are safe for normal use, hazardous work, servicing, or maintenance. + Monitors and controls processes using visual observation, process data, and on-line testing. + Identifies and troubleshoots problems in processes, products, or equipment, and work for a solution. + Gathers, maintains records, and uses statistical control charts. + May generate, handle, transfer, move, drum, label, sample, and document waste. + May prepare, load, move, and unload various materials. + Reasoning ability - Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. + Ability to interpret a variety of instructions. + Performs tasks assigned to operations. + Ensures operational activities and process performance are aligned with business and unit goals. + Coaches and trains others on plant operations. + Willing to work shift work including weekends **Responsibilities** **Qualifications** **We Value:** + High School Diploma + 1+ years' previous work experience in a chemical environment + Self-motivated with ability to manage multiple demands + Excellent verbal and written communication skills + Excellent interpersonal skills + Basic computer skills **Physical Requirements:** + Ability to stand for long periods of time. + Ability to climb, stoop, kneel, and bend. + Ability to lift up to 35 pounds. + Ability to work in varying temperatures and various weather conditions. **BENEFITS OF WORKING FOR SOLSTICE ADVANCED MATERIALS** In addition to a competitive salary, leading-edge work, and developing solutions side-by-side with dedicated experts in their fields, Solstice Advanced Materials employees are eligible for a comprehensive benefits package. This package includes employer-subsidized Medical, Dental, Vision, and Life Insurance; Short-Term and Long-Term Disability; 401(k) match, Flexible Spending Accounts, Health Savings Accounts, EAP, and Educational Assistance; Parental Leave, Paid Time Off (for vacation, personal business, sick time, and parental leave), and 12 Paid Holidays. Solstice Advanced Materials is an equal opportunity employer. Qualified applicants will be considered without regard to age, race, creed, color, national origin, ancestry, marital status, affectional or sexual orientation, gender identity or expression, disability, nationality, sex, religion, or veteran status. **About Us** **About Solstice Advanced Materials** Solstice Advanced Materials is a leading global specialty materials company that advances science for smarter outcomes. Solstice offers high-performance solutions that enable critical industries and applications, including refrigerants, semiconductor manufacturing, data center cooling, nuclear power, protective fibers, healthcare packaging and more. Solstice is recognized for developing next-generation materials through some of the industry's most renowned brands such as Solstice , Genetron , Aclar , Spectra , Fluka, and Hydranal. Partnering with over 3,000 customers across more than 120 countries and territories and supported by a robust portfolio of over 5,700 patents, Solstice's approximately 4,000 employees worldwide drive innovation in materials science. For more information, visit Advanced Materials (********************************************** . **Job Identification** 105998 **Job Category** Integrated Supply Chain **Job Schedule** Full time **Locations** 1953 South Harvey St, Muskegon, MI, 49442, US **Hire Eligibility** Internal and External **Relocation Package** None **US Person** Due to U.S. export control laws, candidates must be U.S. citizen, U.S. permanent resident, or have protected status under asylum or refugee.

We are seeking a dedicated, self motivated individual to perform manual and machine operator tasks in the maintenance, and operation of an automatic cutter in our Digital Production department.

Kent Quality Foods, a family-owned business and an established leader in the food processing industry is now hiring for a 1st Shift Production Operator position at our Hudsonville Location ! If you are looking for an organization that appreciates you and what you do - look no further. Qualifications: Ability to follow instructions and procedures Machine setup experience will be helpful Standing for 8-12 hours a day Accuracy and attention to detail verifying setups and work performed Good team working skills and the ability to work alone Possess a good understanding of health, safety, and basic hygiene rules Join a growing company that offers: Starting Wage $16.50 - $18.00 Extra Dollar through ATTENDANCE BONUS PROGRAM! Overtime opportunities Full benefits 401k) Plan with Company match Outstanding team environment Apply online or in person at our Hudsonville location 3426 Quincy Street Hudsonville, MI. 49426

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customers' needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.). Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay $21.05 - $23.71 per hour Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

About Safari Circuits At Safari Circuits, we believe our drive for a family-like culture makes a positive impact on our team and the quality of products we produce. We manufacture Printed Circuit Board Assemblies (PCBAs) for the global electronics market. We are a growing business, and we meet the stringent regulatory demands of medical, military, and defense fields. Founded in 1985, Safari Circuits provides world-class electronics development and manufacturing services to our customers and has a proven track record of creating stability within our ever-growing team. We are ready to shape a stronger future for our company and invest in your success. Position Summary To assemble finished product using sub-assemblies, parts, and fasteners. Assist in troubleshooting product, non-conformances, and resolving production problems. In addition, this individual will perform quality work in support of the following main duties. Essential Job Functions include, but not limited to, the following: Adheres to all plant safety and environmental guideline, policies, and procedures. Conducts daily maintenance of tools, fixtures, and workstations. Identifies safety issues to management. Meets or exceeds safety, production, and quality goals. Turns in tools for calibration. Makes part transactions in material systems. (Plex) Performs total quality checks. Participates in product first article inspections when needed. Collects process data on check sheets or other quality data sheets. Assists in the creation of process tools, fixtures, and equipment. Follow strict procedures for ESD. Read and interpret assembly instructions. Monitor calibration and expiration dates of equipment and chemicals. Perform all other duties assigned. Keeps work area clean throughout shift. Other duties, as assigned TRAINING (Ongoing while in this position) ESD Training Applicable Quality Procedures and Work Instructions Training pertinent to applicable State and Local laws. Minimum Qualifications, Knowledge, Skills, and Abilities: Applicants must possess any education, training or experience necessary to perform all essential duties and responsibilities associated with the position. Education, training and experience indicative of an individual's ability to perform all essential job duties and responsibilities include the following: High School or GED equivalent. Perform final assembly of units per assembly instructions Verify kits for correct part numbers and quantities. Knowledge of manufacturing assembly and equipment Must be able to read and write English. Ability to understand work process to achieve consistent results. Ability to work in a team environment. Ability to work with an awareness of safety for yourself and others. Must be willing and able to work any shift, weekends, and holidays as scheduled. Must be willing and able to work overtime as needed. Must be willing and able to wear necessary Personal Protective Equipment as required by specific job. Must be willing to sign a confidentiality agreement as a condition of employment Must be willing and able to maintain strict adherence to safety rules and regulations, including wearing safety equipment Ability to pass a pre-employment drug screen. Ability to pass a background investigation, including but not limited to personal and professional financial history, nationwide criminal record search, credit check, and other relevant background information deemed necessary by WDC. Preferred Qualifications, Knowledge, Skills, and Abilities: Previous experience in a manufacturing environment preferred. Experience operating material handling equipment (i.e. hand trucks, pallet jacks, and/or forklifts preferred) Experience using a computer for record-keeping and documentation functions preferred. Prior knowledge or experience working with a Native American Tribe. Physical Requirements: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to lift up to 50 pounds. Must have visual acuity to read and interpret assembly instructions. Willing and able to perform tasks such as lifting, walking, climbing, stooping, standing, pushing, and/or pulling for up to 12 hours a day. Travel Requirements: None Disclaimer: This job description indicates in general the nature and levels of work, knowledge, skills, abilities and other essential functions (as covered under the Americans with Disabilities Act) expected of an incumbent. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of an incumbent. An incumbent may be asked to perform other duties as required. Native American & Veteran Hiring Preferences will be applied in accordance with Waséyabek Development Company policy. We are committed to making merit-based hiring decisions. We are proud to be an Equal Opportunity Employer making decisions without regard to race, color, religion, sex, sexual orientation, gender, gender identity, national origin, age, disability, genetic information, citizenship, marital status, height or weight, veteran status, or any other legally protected category. 1st Shift: 7am-3pm 2nd Shift: 3pm-11pm 3rd Shift: 11pm-7am