Operator jobs in Huntington, IN

EOE Statement We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status or any other characteristic protected by law. Category Manufacturing Description The Electronics Production Operator works onsite and in-person to performs assembly operations to mass-produce products: relays, thermostats, actuators, and other heating and cooling control devices. ESSENTIAL DUTIES AND RESPONSIBILITIES Include the following. Other duties may be assigned. The below statements are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties, and requirements of personnel as classified. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Set up the assembly line/workstation and stock parts for the product to assemble. * Refer to the most current product engineering prints and work instructions to assemble parts to build products. * Glue, clamp, press, screw, or solder parts together. * Set up, operate, maintain, and run machines such as arbor presses, punch presses, mold machines, or riveting machines. * Report issues that would compromise product quality, or damage to tools or machinery. Position Requirements QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EDUCATION and/or EXPERIENCE High school diploma, or General Education Development (GED) certificate, or less than High school education; or one to three months related experience and/or training; or equivalent combination of education and experience. COMPUTER SKILLS Individuals should have a basic understanding of computer operation to update product information. LANGUAGE SKILLS * Ability to read and comprehend simple instructions, short correspondence, and part prints. * Ability to enter production information in computer (Epicor software). * Ability to effectively present information in one-on-one discussions with supervisor and co-workers. MATHEMATICAL SKILLS Ability to add and subtract multi-digit numbers. REASONING ABILITY * Ability to apply commonsense understanding to carry out written or verbal instructions. * Ability to communicate complex issues in a concise, understandable, and interesting way. OTHER QUALIFICATIONS * The ability to use small hand tools and power screw guns. * The ability to use soldering tools, with training. PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to sit; use hands to handle, or feel objects, tools, or controls; and reach with hands and arms. * The employee is occasionally required to stand or walk; and talk and hear. * Certain machines or equipment regularly require the employee to stand. * The employee must frequently lift and/or move up to 15 pounds and occasionally lift and/or move up to 40 pounds. * Specific vision abilities required by this job include close vision, color vision, and depth perception. WORK ENVIRONMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to fumes or airborne particles. * The noise level in the work environment is usually moderate. Full-Time/Part-Time Full-Time Position Electronics Production Operator Number of Openings 1 Exempt/Non-Exempt Non-Exempt Location Kreuter Manufacturing Co. Inc About the Organization For over 50 years, KMC Controls has helped facilities achieve higher levels of energy efficiency and indoor environmental quality by automating and controlling building systems. KMC Controls is an independent American manufacturer of building automation solutions for system integrators, system distributors, and OEM partners. KMC is dedicated to: * Building automation solutions that are easy to purchase, install, and use * Providing open, secure, and scalable systems * Facilitating reductions of energy consumption and operating costs * Increasing occupant comfort and productivity Our Mission Innovative and intuitive solutions; responsive and supportive people. Our Vision KMC Controls will provide innovative, easy-to-use building management and automation solutions. We will be known for our market focus, creativity, and dedicated, passionate employees. Made in the USA KMC Controls building automation devices are designed and manufactured in the U.S.A. under the ISO-9001: 2008 registered quality system. KMC partners enjoy a comprehensive 5-year product warranty and unparalleled post-sales support.

Machine Operator Kendallville Plant Are you ready to join a team that produces quality products that are a staple in households across the country? Kraft Heinz Kendallville is excited to help you start your career today! Non-union plant employing 280 employees across 3 shifts. Purchased in 1934 from Breyer's Ice Cream and began producing caramel in 1935. Began producing Marshmallows and Marshmallow Crème in 1961 and Marbits (think dehydrated marshmallows found in cereal) in 1979. Kendallville is the sole producer of all our product lines. Community Overview: Kendallville is located about 30 minutes north of Fort Wayne and offers a small-town community. Responsibilities & Duties: Perform set-up, start-up and changeover procedures for the equipment as needed. Assist in troubleshooting issues with line performance as it relates to equipment operation. Accurately maintain downtime records during line operation. Perform sanitation duties for production and periodic sanitation work as assigned. Responsible for conducting and accurately documenting quality checks. Responsible for monitoring and communicating any process or product abnormalities to your Supervisor, Team Leader, or Line Technician. Responsible for communicating with previous and next shift regarding any concerns or watch outs. Perform all other duties as assigned by the Supervisor or Team Leader. Qualifications: Self-motivated and strong drive for results. Use simple mathematics. Lift 50 pounds. Able to work in areas that contain dust and starch particles. Able to work in hot and humid conditions. Basic knowledge of manufacturing and/or food processing, quality standards, hygiene, work safety, etc. preferred. Benefits & Compensation Overview: Starting Pay: $20.55- $27.00 per hour Annual Bonus Program 12 Paid Holidays per Year Paid vacation - up to 2 weeks in your first year Medical with (HRA) Health Reimbursement Account or (HSA) Health Savings Account, Dental, and Vision insurance 401k with company match Additional perks: Paid Parental Leave, Discoun25ted YMCA Membership, Product Purchase Program, Employee Assistance Program Starting Pay: $20.55- $27.00 per hour Work Schedule: 2nd (M-F, 2:30pm-10:30pm) shift or 3rd (S-Th, 10:30pm-6:30am) shift Daily/Weekly overtime possible Kraft Heinz Foods Company is an equal opportunity employer. We value diversity and inclusion in our workforce. We are committed to providing equal employment opportunities to all individuals regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, veteran status, or any other characteristic protected by law. Kraft Heinz Foods Company is dedicated to providing reasonable accommodations and adjustments to individuals with disabilities to enable them to participate in the application process and perform the essential functions of the job. If you require an accommodation or adjustment, please contact us to discuss your needs. Benefits: Coverage for employees (and their eligible dependents) through affordable access to healthcare, protection, and saving for the future, we offer plans tailored to meet you and your family's needs. Coverage for benefits will be in accordance with the terms and conditions of the applicable plans and associated governing plan documents. Wellbeing: We offer events, resources, and learning opportunities that inspire a physical, social, emotional, and financial well-being lifestyle for our employees and their families. You'll be able to participate in a variety of benefits and wellbeing programs that may vary by role, country, region, union status, and other employment status factors, for example: Physical - Medical, Prescription Drug, Dental, Vision, Screenings/Assessments Social - Paid Time Off, Company Holidays, Leave of Absence, Recognition, Training Emotional - Employee Assistance Program , Wellbeing Programs, Family Support Programs Financial - 401k, Life, Accidental Death & Dismemberment, Disability Location(s) Kendallville Plant Kraft Heinz is an Equal Opportunity Employer that prohibits discrimination or harassment of any type. All qualified applicants are considered for employment without regard to race, color, national origin, age, sex, sexual orientation, gender, gender identity or expression, disability status, protected veteran status, or any other characteristic protected by law. Applicants who require an accommodation to participate in the job application or hiring process should contact ***********************.

If you've got quick reflexes, a steady hand, and a knack for precision-whether behind a joystick or in the driver's seat-we want you on our team! We're looking for a Heavy Equipment Operator to operate our manned and unmanned equipment. Unmanned equipment operated remotely from our onsite control center. If you enjoy mastering complex controls and handling powerful machines, this is your chance to turn your MudRunner skills into a rewarding career. Ready to level up? Apply today! The Levy Group of Companies is seeking equipment operators to work at our Columbia City Mill Service location in Columbia City, IN. Heavy Equipment Operators perform all functions as it pertains to operating heavy off-road mobile equipment in manned and unmanned equipment. Pay: $20/hr; plus a $2/ hour shift differential Shift: 4 on/4 off; 7 PM - 7 AM Night Shift; training period schedule varies Benefits Competitive benefits package including Medical, Dental, Prescription, 401(K) with 3% Employer Contribution, Long- and Short-term Disability Year round, non-weather dependent employment Tuition Reimbursement for qualified skilled trade programs Student Loan Repayment Program Employee Referral Program Responsibilities The Heavy Mobile Equipment Operator will: Operate various heavy mobile equipment such as: Water Trucks, 988K Front End Loaders (manned and unmanned), Excavators, 777 Haul Trucks, D8/9 Dozers, Pot Haulers, & Sennebogen material handlers Comply with all safety regulations, policies, and record-keeping Load materials in designated areas Maintain work area to allow safe movement and access Monitor any change in machine performance to identify potential malfunctions & report to the maintenance department Perform daily machine inspection and routine greasing, oiling, and fueling Meet customer service expectations Skills The ideal candidate will have: Experience operating end loader, excavator, dozer, and other specialized mobile equipment Comfortable with computers Comfortable remotely operating equipment from an onsite control center A team and safety oriented mentality Ability to lift up to 50lbs Basic Mechanical aptitude. Knowledge of bulk materials Good verbal and written communication skills. Willingness to perform other duties as assigned. High school diploma or equivalent To Apply Please submit your resume. Military Members are welcome and Veterans are encouraged to apply! Who is Edw. C. Levy Group of Companies? We are a unique, 100-year-old family-owned company that transforms our recycled products into construction materials, lightweight aggregates, asphalt, cement, concrete, agricultural products, and more. We provide steel mill services, flame cutting and treatment, road building, logistics, laboratory testing, and a variety of other solutions for our customers. The Levy Group of Companies is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, veteran status or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. The Levy Group of Companies makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job DescriptionFurnace Operator Shift: 6:00am-4:00pm (Monday-Thursday) Pay: $18.00 per hour Direct Hire Opportunity! Job SummaryAre you a dependable, safety-focused individual looking for a hands-on production role? We're seeking a Production Furnace Operator to join our manufacturing team. In this role, you'll be responsible for maintaining furnace operations during your assigned shift, ensuring production schedules, quality standards, and safety requirements are consistently met in a demanding industrial environment. What You'll Be DoingAs a Production Furnace Operator, your core responsibilities will include: Operating and monitoring furnaces: Keep furnaces running on schedule while meeting established production and quality standards. Material recovery and sampling: Monitor material recovery, perform accurate sampling, and submit samples for analysis by furnace load. Material handling and documentation: Weigh, mark, dump, and process aluminum material while maintaining accurate paperwork and shift pass-down reports.In addition, you will also be expected to oversee the safe operation of mobile equipment, monitor emissions, assist supervisors with required documentation, and follow all directions provided by management.What We're Looking For To be successful in this role, you should have the following:Qualifications: High School Diploma or GED preferred Ability to work flexible shifts and overtime as required Ability to lift moderate to heavy weights as needed Skills: Mechanical aptitude: Helpful for operating furnaces, mobile equipment, and related machinery safely and efficiently. Attention to detail: Important for monitoring recovery rates, sampling accuracy, and completing required documentation. Safety awareness: Strong commitment to following company safety policies and working in high-heat industrial environments.

The Chemical Operator works in a warehouse focusing on chemical handling, safety, and operating a forklift. They must operate with all chemicals utilizing Webb's safety protocols, Work Instructions, PPE and adhere to safety standards for each and every work zone. This is an effort to outline the responsibilities of the position to include, but not limited to, all the following and additional responsibilities as assigned by management. REPORTS TO: Fort Wayne Operations Supervisor DIRECT REPORTS: NONE RESPONSIBILITIES Packaging chemicals off of Tankers Monitoring floor scale Monitoring the waste water tank Taking monthly samples from the waste water tank Monitoring samples in the sample cabinets Asset management (empty assets coming in, prepping for drumming and storage) Inventory management of drumming supplies (caps, lids, gaskets, etc.) Driving capability Operating forklift to load/unload trucks Working with Inventory Management System Barcoding, loading boxes, shipping/receiving, repackaging, correct labeling Transferring hazardous chemicals into containers/tankers Filling out all paperwork for Bulk correctly Properly loading assets into TrackAbout Proper use of safety equipment and safety showers Following, improving, and updating work instructions Reporting and being an active part of the continual improvement process Audits Following safety procedures Working outdoors in varying weather conditions daily/year-round Check in with Supervisor/Lead before punching out daily for any final assignments Other duties as assigned SKILLS REQUIRED Forklift Operator experience Good housekeeping habits Ability to recognize potential hazards and correct them PHYSICAL CAPACITY Weight- lift 50-100lbs Over shoulder and above head Low to ground bend/scoot Climb stairs and ladders Gripping/ Hands Lifting WORK SCHEDULE 40 hours/week, OT as needed Monday-Friday, weekend work as needed 1st shift: 7:30am-4:00pm Lunch: as planned/scheduled per day Regular and consistent attendance After Hours - as scheduled

Job Description The Loader Operator is responsible for moving material throughout the factory and ensuring the achievement of smooth receiving, stocking, and shipping. Essential Functions Direct truck drivers during loading and unloading Operate scale, record weights and dimensions accurately Operate packaging equipment to securely transport inbound, cross-dock, and outbound loads Load and unload material at the standard rate of production Inspect material handling equipment before operating, record data from the inspection Visually differentiate between similar metals Assist in other areas and perform other duties, as needed Qualifications and Requirements High school diploma or equivalent preferred, but not required 1+ year(s) experience operating heavy equipment Ability to consistently comply with PPE and safety standards while on the production premises Pass certifications on all materials handling equipment on site Experience working in a 24/7 production environment Strong work ethic with a positive attitude Work Environment The noise level is usually very loud Regularly works near moving mechanical parts Ability to lift up to 50lbs, several times per day The buildings are heated during the winter, but conditions could be cold in the winter & hot during the summer The processing areas are dirty & wet at times Processing facilities/areas are dusty

Production Operators Location: Bluffton, Indiana We are seeking production operators for our structural foam molded facility and our high pressure plant. Production operators are responsible for trimming excessive plastics off parts, checking for defects, visual inspection, stacking and packing product. You must be able to stand, bend, lift up to 50 lbs, pull and push. Starting pay $20.00 per hour for level 1 operators (must be able to lift up to 50 pounds) with up to a $.50 increase at 60 days with excellent performance and attendance. Shift differential - $2.00 for night shift. Experience in injection molding a plus. Must be flexible to shift. Pre-employment drug screen required. We test for marijuana. Monthly attendance bonus - $500.00 per month.Excellent benefit package including: Medical, dental, vision, short term disability, long term disability, critical care and accidental care, life insurance, vacation, 10 paid holidays after 30 days of employment. 401k with matching available after 30 days.

Production Operators Location: Bluffton, Indiana We are seeking production operators for our structural foam molded facility and our high pressure plant. Production operators are responsible for trimming excessive plastics off parts, checking for defects, visual inspection, stacking and packing product. You must be able to stand, bend, lift up to 50 lbs, pull and push. Starting pay $20.00 per hour for level 1 operators (must be able to lift up to 50 pounds) with up to a $.50 increase at 60 days with excellent performance and attendance. Shift differential - $2.00 for night shift. Experience in injection molding a plus. Must be flexible to shift. Pre-employment drug screen required. We test for marijuana. Monthly attendance bonus - $500.00 per month.Excellent benefit package including: Medical, dental, vision, short term disability, long term disability, critical care and accidental care, life insurance, vacation, 10 paid holidays after 30 days of employment. 401k with matching available after 30 days.

Founded in 1925 and a leader in the production of Stainless Steels, Nickel Alloys and Titanium Long products, Valbruna is a private company with 2,500 employees and an annual output of approx. 250,000 tons of specialty steels. Production is primarily focused on Stainless Steels and Specialty Alloys, available in blooms and billets, ingots, round, square, flat, hexagonal and angle bars, wire rod, wire, reinforcement bars and threaded rods, with the expressed goal of satisfying the most sophisticated needs of the customer. To that end, Valbruna is constantly updating its production capabilities and experience. Essential Duties/Responsibilities: Interprets program sheets, instructions, and process sheets to determine work to be done. Performs diversified operations on numerical control machining centers. Performs a variety of milling, drilling, boring, or related operations to close and interrelated tolerances. Reviews setup sheet and specifications to determine machining sequence and dimensions of finished work piece. Attaches fixture to machine bed and positions and secures work piece in fixture according to setup instructions. Selects and installs cutting tools in machine spindle or magazine. Manipulates controls and enters commands to index cutting tool to specified set point and to start machine. Observes and listens to machine operation to detect malfunctions, such as worn or damaged cutting tools. Changes cutting tools and location of work piece during machining process as specified in setup instructions. Performs a variety of inspection and gauging operations to insure maintenance of quality standards and specifications. Measures work piece for conformance to specifications. Could be placed on Overhead Crane, Heat Treat, Primary Mill, Forklift, Finish Operations. Notifies supervisor of discrepancies.

A leading manufacturer in the defense sector is seeking reliable and motivated Production Operators to join our growing team. This position plays a key role in ensuring efficient production, quality control, and equipment operation within a team -based manufacturing environment. Responsibilities: Operate and monitor production machinery and equipment safely and efficiently. Perform assembly, machining, and tool change tasks according to standard operating procedures. Conduct quality checks and machine resets as needed to maintain product standards. Maintain a clean and organized workstation in compliance with 5S and safety practices. Follow written instructions, work orders, and standardized work documentation. Collaborate effectively with teammates and supervisors to meet production goals. Support continuous improvement initiatives and report any safety or quality concerns immediately. Qualifications: High school diploma or equivalent (GED) required. Prior manufacturing, assembly, or production experience preferred. Strong attention to detail, teamwork, and communication skills. Must be able to work in a fast -paced environment and adapt to changing priorities. VantageClear Certification (or equivalent security certification) required

Make a Difference in Fort Wayne - Become an Heavy Equipment Operator! Backhoe Operator - Heavy Equipment Operator Department: City Utilities Field Operations Pay: $28.75 to $29.75/hour Schedule: 7:30 a.m. - 3:30 p.m.; Required to be on-call in assigned rotation Location: Fort Wayne, IN What You'll Do: * Operate heavy construction equipment that includes excavators, backhoes, skid steers, trenchers, assorted rental equipment, front loaders, etc.; * Performs excavations for the repair and/or replacement of water distribution assets, sanitary sewer assets, and storm sewer assets along with other types of excavation; * Chipping brush, cutting trees, and operating chainsaw & trimmer as required; * Lifting, moving and placing heavy objects and bulk materials with equipment; * Leveling and grading; * Cutting swales along roadways and/or reshaping them; * Loading and securing equipment onto transport trailers; * Safe use and disposal of a variety of chemicals. Qualifications: * Education equivalent to a high school diploma; * Preferred three (3) years' experience in operating heavy equipment; * Valid Indiana Driver's License; * New employees hiring into this position will be required to have a Commercial Driver's License (CDL) with an "A" endorsement Beginners Permit. New employees must obtain a regular CDL within their first one hundred and eighty (180) days. All existing employees must have and maintain a valid CDL with an "A" with a tanker "N" endorsement; * Certified Component Person: Excavation and Trench (must obtain within 90 days of start date); * Certified Competent Person: Confined Space (must obtain within 90 days of start date). Physical Requirements & Work Environment: * Occasionally required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl. * Occasionally lift and/or move up to 50 pounds. * Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and the ability to adjust focus. * The noise level in the work environment is usually very loud and requires hearing protection with a 25 decibel noise reducing rating or above. Equal Opportunity Employer

We are seeking a detail-oriented Machine Cell Operator to join our machining team on the 3rd shift. This role involves operating CNC machines and secondary equipment, washing, inspecting, and packing parts to meet quality standards. Operators may also train other team members and take on additional responsibilities depending on experience. Key Responsibilities: Operate CNC machines and secondary equipment safely and efficiently Inspect parts using gauges and process control plans Wash, assemble, and prepare parts for shipment Deburr parts using handheld or power tools Document machine processes and prepare production/quality reports Perform machine-specific TPM requirements and follow 5S initiatives Report machine, part, or material issues to Lead Tech or Supervisor Maintain a clean and safe work environment Other duties as assigned Requirements: High School Diploma or equivalent preferred 6-12 months experience operating CNC machines or secondary equipment Familiarity with quality control gauges preferred Basic math and measuring skills Ability to lift 5-50 lbs and perform repetitive tasks Good vision and attention to detail Certification on cell operation preferred Forklift experience is a plus Work Environment: Exposure to moving mechanical parts, fumes, vibration, and temperature extremes Noise levels vary from low to high depending on proximity to machines Position requires standing, walking, bending, and repetitive hand/arm movement Why Join Us: Work in a fast-paced manufacturing environment Supportive team with opportunities for skill growth Competitive pay with 3rd shift schedule How to Apply:If you're interested in being submitted for current job opportunities, please complete the quick registration at the link below: ? shqmsg.co/PT2C3v

Code : 26031-1 Information

A rapidly growing company is making strides in advanced manufacturing and technology. They are dedicated to innovation credit their achievements to a focused path, and our talented, passionate team members. We offer on the job training for most positions. If you are looking for a rewarding career with a company that values you and your skills, we look forward to hearing from you. Hours: Monday-Friday 8:00 a.m.- 5:00 p.m.Pay Rate: $17 per hour/ $20 per hour after they go direct hire Job Description: Operations of automatic bandsaw, CNC Mill Operation, CNC Lathe Operation, deburring and grinding, sweeping and cleaning Resume/interview Environment:Well lit Temperature regulated Qualifications:Just need a good attitude and willingness to work, willing to train PPE:Steel toes, jeans, t-shirts (no rips, tears or holes in clothing), safety glasses and hearing protection 5 Panel Drug ScreenIDOC/SOS SearchFelonies case by case approval HSD/GED preferred#portland

Salary Description 16.22-17.30

If you've got a passion for heavy equipment, loved tonka toys as a kid, enjoy time outdoors, & get gratification working with a team to build a better environment for the next generation, Levy invites you to play in our sandbox. The Levy Group of Companies is seeking Heavy Equipment Operators to work at our Butler Mill Services location in Butler, IN. The Heavy Equipment Operators perform all functions as it pertains to operating heavy off-road mobile equipment. Pay: $21.00 + an hour based on experience, $2.00 an hour additional shift differential for nights positions Shift: 4 on 4 off; 8 AM/PM - 8 PM/AM Benefits Competitive benefits package including Medical, Dental, Prescription, 401(K) with 3% Employer Contribution, Long- and Short-term Disability Year round, non-weather dependent employment Tuition Reimbursement for qualified skilled trade programs Student Loan Repayment Program Employee Referral Program ResponsibilitiesThe Heavy Mobile Equipment Operator will: Operate various heavy mobile equipment such as: Water Trucks, 988K Front End Loaders, Excavators, 777 Haul Trucks, D8/9 Dozers, Pot Haulers, & Sennebogen Cranes Comply with all safety regulations, policies, and record-keeping Load materials in designated areas Maintain work area to allow safe movement and access Monitor any change in machine performance to identify potential malfunctions & report to the maintenance department Perform daily machine inspection and routine greasing, oiling, and fueling Meet customer service expectations SkillsThe ideal candidate will have: Experience operating end loader, excavator, dozer, and other specialized mobile equipment A team and safety oriented mentality Ability to lift up to 50lbs Basic Mechanical aptitude. Knowledge of bulk materials Good verbal and written communication skills. Willingness to perform other duties as assigned. High school diploma or equivalent To ApplyPlease submit your resume. Military Members are welcome and Veterans are encouraged to apply! Who is Edw. C. Levy Group of Companies? We are a unique, 100-year-old family-owned company that transforms our recycled products into construction materials, lightweight aggregates, asphalt, cement, concrete, agricultural products, and more. We provide steel mill services, flame cutting and treatment, road building, logistics, laboratory testing, and a variety of other solutions for our customers. The Levy Group of Companies is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, veteran status or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. The Levy Group of Companies makes hiring decisions based solely on qualifications, merit, and business needs at the time.

The Loader Operator is responsible for moving material throughout the factory and ensuring the achievement of smooth receiving, stocking, and shipping. Essential Functions Direct truck drivers during loading and unloading Operate scale, record weights and dimensions accurately Operate packaging equipment to securely transport inbound, cross-dock, and outbound loads Load and unload material at the standard rate of production Inspect material handling equipment before operating, record data from the inspection Visually differentiate between similar metals Assist in other areas and perform other duties, as needed Qualifications and Requirements High school diploma or equivalent preferred, but not required 1+ year(s) experience operating heavy equipment Ability to consistently comply with PPE and safety standards while on the production premises Pass certifications on all materials handling equipment on site Experience working in a 24/7 production environment Strong work ethic with a positive attitude Work Environment The noise level is usually very loud Regularly works near moving mechanical parts Ability to lift up to 50lbs, several times per day The buildings are heated during the winter, but conditions could be cold in the winter & hot during the summer The processing areas are dirty & wet at times Processing facilities/areas are dusty

Do you take pride in operating big machines that keep our parks safe, beautiful, and ready for the community to enjoy? Heavy Equipment Operator - Parks Pay: $26.43 per hour Schedule: 7:00 a.m. - 3:00 p.m., may vary What You'll Do: • Operate bulldozers, backhoes, dump trucks, trenchers, graders, and other heavy equipment for park maintenance and repairs • Perform grading, landscaping, drainage, and snow-removal tasks across City parks and facilities • Maintain safe play surfaces, repair roads and sewers, and complete athletic field renovations • Conduct basic equipment servicing and assist with training crew members Must-Have Qualifications: • High school diploma or GED • Five (5) years' experience operating heavy equipment such as dozers, graders, or backhoes • Valid Indiana Driver's License and ability to obtain a CDL Class A with air-brake endorsement within one year of hire Why Join Us: • Be part of a team that keeps Fort Wayne's parks thriving and community spaces safe • Stable year-round work with strong benefits and a City pension plan • Opportunity to use your skills outdoors while serving the community you love Equal Opportunity Employer Your skill moves Fort Wayne forward-one park, one project, one day at a time. Employment is contingent upon the successful completion of applicable drug screening, physical examination, and background checks.

Machine Operator Mon-Thursday 6a-4:30p We are seeking a skilled Machine Operator/Wire Prep to join our team. In this role, you will be responsible for operating various types of industrial machinery and equipment, as well as preparing wires for assembly and production processes. Your attention to detail and ability to follow precise instructions will be crucial to the success of our operations. Key Responsibilities: - Operate industrial machinery and equipment, such as cutting, bending, and shaping tools, to prepare materials for assembly - Perform wire preparation tasks, including cutting, stripping, and terminating wires to specific lengths and configurations - Maintain a clean and organized work area, ensuring compliance with safety protocols - Collaborate with team members to troubleshoot issues and optimize production workflows - Participate in ongoing training and development to enhance your skills and knowledge #Kendallville