Operator jobs in Lexington, SC - 205 jobs

The TFE Operator will be responsible for machine operation. This would include troubleshooting, documentation, and quality of material. • High school diploma or equivalent • The ability to carry out oral and written instructions along with the ability to adapt to different situations • The ability to lift up to 50 lbs. repetitively; push/ pull approximately 11lbs., walk up and down stairs. • The employee must have the ability to perform inspection functions such as visual inspection to detect cosmetic defects and color differentiation of products. • Must have basic mathematical skills including addition subtraction, multiplication, division, fractions and decimals. Must be able to read and write legibly. • Attendance and punctuality are essential functions of this position. Any unscheduled absence or tardy will have a negative impact on our ability to meet our production objectives. • Physical aspects of the job are defined on the Physical Demands Analysis located in HR Must Meet WorkKeys/WIN Requirements (Level 3 for Reading & Level 4 for Math) • Install proper tooling, load, run and monitor extruder with minimum downtime. • Make pre-forms out of resin as specified on order card. • Measure and maintain correct wall thickness of tubing. • Operator only runs one machine. • Keep tooling and machines in good working condition. • Polish and straighten tooling on lathe. • Keep work area clean and free of debris. • Observe all safety rules and regulations. • Maintain good communications within the department.

Long Term Maintenance No Per Diem Mon - Thursday 10 hour days SUMMARY Operates various power-driven machinery used to move dirt or other materials. May operate all or some of the follow types of equipment: backhoe, bulldozer, crane, dragline, font-end loader, motor grader, cherry picker, dump truck, etc. RESPONSIBILITIES - Sets up and operates production equipment in accordance with established guidelines and procedures. - Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. - Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. - Interprets hand signals to determine where materials are to be placed. - May be required to manipulate equipment on unlevel working surface. - May assist in lifting, position and securing or materials and work pieces during installation. - May be responsible for routine maintenance or repairs. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. Has knowledge of commonly-used concepts, practices, and procedures within a particular field. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under immediate supervision. Primary job functions do not typically require exercising independent judgment. Typically reports to a supervisor or manager. Brown and Root Industrial Services also offers the following: * Opportunities for advancement. * Potential career growth into NCCER certified craft program with additional benefits of increase wages * Paid holidays and vacation * Elective medical, dental, vision, and supplemental benefits are available * Supplemental medical premium contributions for qualified positions. * Immediate 401(k) program with the employer matching the employee's first 3% contribution, and 50% of the employee's next 2% (vested immediately) * Employee Quarterly incentive bonus program Work Schedule is Monday-Thursday 4 10 hour days Shift Only JOB REQUIREMENTS - Observes load hook up and determines safety of load. - Manipulates crane control to regulate speed and direction of crane and hoist movement according to written, verbal or signal instructions. - Cleans and maintains crane and hoisting mechanism. - Inspects crane for defective parts, documents and notifies the supervisor of the defects or malfunctions. - Loads, transports, and unloads materials, tools, equipment and supplies. - Performs minor maintenance or cleaning activities on tools and equipment. - May be required to interpret load charts. PHYSICAL REQUIREMENTS 1. Strength: a. Standing 5% Walking 5% Sitting 90% b. Lifting 10 lb. Carrying 10 lb. Pushing 50 ft-lb. Pulling 50 ft-lb. 2. Climbing O Balancing O 3. Stooping O Kneeling O Crouching O Crawling O Reaching C Handling C Fingering C EXPLANATION OF SYMBOLS NP Not Present O Occasionally (0-33%) F Frequently (34-66%) C Constantly (67-100%) Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Reports To: Michael Areheart Seeking an individual to perform various duties at an aggregate plant facility including equipment operation, welding, and other plant-related tasks. Must be dedicated, willing to learn and wanting to build a career while achieving the highest level of safety standards. This is an entry level equipment operator's position, and we will consider training the right individual. Benefits * Recession Resistant Industry * Consistent work, with a work/life balance * Overtime Opportunities * Paid Holidays * Paid Time Off * 401(k) Plan w/ employer match contribution * Medical / Dental / Vision offered the first of the month following start date * Life Insurance Company Paid * Short-term / Long-term Disability Insurance Company Paid How to Get Started * STEP ONE: Complete our online application (linked here) * STEP TWO: Be prepared to speak with one of our Recruiters, as they'll be reaching out to you soon. * STEP THREE: Keep an eye on your texts and emails, we'll use this to send you additional details, questions, and information pertaining to our hiring interview and selection process. Get Hired: What to Expect During our Hiring Process * Background Check * Motor Vehicle Record Check * DOT 5-Panel Drug Screen * Fit for Duty Baseline Physical * Paid Orientation * A great team to support you throughout your career with Summit Materials companies! Roles & Responsibilities * Operate equipment to assist with the daily production and operations of the plant * Assist plant supervisor with the daily operations and upkeep of the plant * Ability to inspect all areas of the plant to perform necessary maintenance, repairs and screen changes * Perform welding and fabrication duties as needed * Detect safety hazards and equipment malfunctions and respond accordingly * Ability to follow directions * Must be able to work evenings and weekends when necessary * Strict adherence to safety requirements and procedures as outlined in MSHA policies and procedures manual, and OSHA guidelines * Perform additional job duties as assigned Ability, Skills & Knowledge * Experience preferred in large aggregate equipment including loader, haul truck, water truck, and skid steers * Knowledge of welding and general mechanics preferred * MSHA certification preferred Req #: 2330

Job Description GENERAL SUMMARY: Coordinates activities of workers engaged in setting up and operating arc welding machine that seam-welds rolled plate to form large diameter spiral fabricated pipe by performing the following duties. MINIMUM QUALIFICATIONS: To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: include the following: (Other duties may be assigned, including but not limited to cross training and housekeeping. Responsibilities also include attention to safety according to all safety rules.) In addition to the duties of cutoff, tracker and floor: In conjunction with department team leader, reviews daily work schedule and specification sheets for current material and process requirements; directs and assists crew members with setup for daily runs. Ensures mill machine is kept running by observing and correcting problems that arise. Monitors quality of alignment and weld process. Monitors and resolves employee issues; conducts and/or recommends employee discipline if required. Performs preventive maintenance and minor repairs to mill machinery and equipment. Refers electrical and hydraulic problems to maintenance department for resolution. Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of product. Brings safety issues to the attention of department manager or safety manager. Loads coils onto the back of machine. Verifies that all positions have been checked and ready to start. Performs other tasks as instructed by supervision. PHYSICAL/ENVIRONMENTAL REQUIREMENTS: While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, reach with hands and arms and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud.

We are hiring for Well Experienced GPS Heavy Equipment Operator ( Bulldozer, Excavators, Backhoes and more). This is not a FORKLIFT POSITION. You must take the operation test first before hiring.You must be hard-working, reliable, and willing to perform various tasks that are required on the work site. Operators are instrumental to the company's success. Safety, efficiency and pride are key attributes of an excellent operator. All operators are required to be safe and be responsible for their assigned equipment.( Temp-to Hire Position) Pay Rate: $18.00hr to $28.00hr (Depending On Experience) Per Diem of $105.00 Per Day Worked (If Greater Then 70miles From Work Site) Working Hours: Monday Through Friday Variable Start Times (Depending on Job) Responsibilities: Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies, and procedures. Perform daily safety and maintenance checks Clean heavy equipment as scheduled and/or required. Ensure heavy equipment is safely and securely stored. Participate in route maintenance to include but not limited to greasing/fueling equipment daily. Practice workplace safety. General daily preventative equipment maintenance. Light labor work as needed. Other duties as assigned. Qualifications: Equipment operation and maintenance. Equipment safety. General site preparation techniques and procedures. Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment. Knowledge of equipment maintenance and storage. Knowledge of workplace safety requirements and procedures. Knowledge of equipment cleaning standards and procedures. Client service and public interaction skills. Analytical and problem solving skills. Decision making skills. Effective verbal and listening communication skills. Ability to read and write to record and maintain daily records. Time management skills. Work Conditions and Physical Capabilities: Physically strenuous and mentally demanding job. Lifting, pulling, and managing heavy equipment and objects, from time to time. Work in all weather.

Apply Now Why You'll Love This Job We are seeking a motivated individual to join our Columbia Site Operations Team based in Gaston, SC. The ideal candidate for the Chemical Operator will possess strong technical skills, a commitment to safety, and the ability to operate complex production equipment while maintaining process efficiency. They should be proactive, have excellent troubleshooting abilities, and work well within a team environment to support all aspects of production. Responsibilities he Chemical Operator will be reportable to the Shift Supervisor and have responsibilities for the following tasks: * Monitor the process through a Distributed Control System (DCS) and adjust process conditions as necessary; log changes, monitor sample results, write work notifications, and send out production reports. * Perform work outside the control room in the production areas related to production services, product sampling, packaging, and materials handling, including proper handling of waste streams, including hazardous waste. * Collect and submit appropriate samples for analysis, using analytical and/or process trends to determine whether re-sampling or process adjustments are needed. * Monitor operating parameters by reading gauges, instruments, and meters; compare readings to known requirements, log information, and take action as necessary. * Respond and react to any alarms within the operating area. * Utilize job knowledge, equipment specification sheets, and operating procedures to monitor and adjust the process via DCS or manually * Start up and shut down process equipment as needed using written procedures. * Assist Maintenance, E&I, and Construction teams, including during shutdowns. * Know the location of valves, pumps, piping, and all critical equipment. * Operate and monitor production equipment such as filter and dryer systems, oxidizers, distillation equipment, pumps, and heat exchangers, cutter systems, tank farm levels, utilities, etc * Make adjustments, open/close valves, bypasses, switch strainers, clean immersion vessels, and perform other tasks as requested. * Perform startups, shutdowns, and process transitions using proper written procedures and checklists. * Troubleshoot problems with flows, levels, equipment, and other process issues using job knowledge, equipment specification sheets, and operating procedures. * Patrol the operating area at designated times routinely to ensure safe operation; make comments on patrol sheets and follow up on concerns with the Team Manager. * Comply with all regulations as applied to the specific job area, including but not limited to MACT/Title V Environmental documentation, food safety regulations, etc. * Serve on the plant ERT (Emergency Response Team) Skills & Qualifications The requirements that an individual must possess to perform the essential elements of the job: Job Skills/Educational Requirements: * Associate's degree in a related technical field or a higher-level qualification (preferred) * 2+ years of experience as a chemical operator or handler in a manufacturing environment * In-depth understanding of fluid dynamics, thermodynamics, pressure systems, and computerized control systems Competencies: * Strong troubleshooting and problem-solving skills * Excellent interpersonal communication skills and a strong commitment to safety practices * Proficiency with computers and software applications * Demonstrates a high level of professionalism, including reliability, discretion, and the ability to represent the company positively in all interactions * Self-motivated, with a positive attitude and ability to work effectively in a team environment Physical Requirements: * Must be clean shaven to ensure proper fit and seal of respirator equipment * Must not be afraid of heights and working in elevated locations on pipe bridges * Ability to sit, stand, and move for extended periods. * Must be able to climb, stoop, kneel, crouch and crawl * Ability to work 12-hour rotating shifts. * Must be able to work scheduled and unscheduled shifts, including short-notice hours on off days, as needed to meet business requirements. * Must be able to work in a fast-paced, physically active environment. Work Environment: * Work is performed in a chemical plant and industrial setting with typical manufacturing conditions. * Work may involve exposure to loud machinery, temperature variations, and other industrial hazards. * Personal Protective Equipment (PPE) is required, including hard hat, hearing protection, eye protection, and steel-toe boots (at minimum). We offer excellent pay and skills based pay progression system. This is an hourly position and benefits eligibility starts on your first day of employment. Alpek Polyester USA, LLC is a global leader in the production of PTA (Terephthalic Acid), PET (Polyethylene Terephthalate) Resins, PET Recycling (rPET), and Specialty Polymers. This integrated business services customers all over the world using its global network of manufacturing entities within the Alpek Polyester umbrella. We are committed to improving people's lives through our products, innovations, and a commitment to sustainability and protecting the environment. Alpek Polyester USA, LLC is headquartered in Charlotte, NC with manufacturing facilities in the Carolinas, Mississippi, Indiana, and Pennsylvania. Alpek Polyester USA, LLC is a division of Alpek, the petrochemicals and synthetic fibers business group of Alfa, S.A.B. de C.V., one of Mexico's largest corporations. Alpek Polyester USA, LLC is subject to US Department of Commerce export regulations and thus must hire individuals who meet national security requirements. Interested applicants (or temporary employees) must meet eligibility requirements. Alpek Polyester USA, LLC is an Equal Opportunity Employer. Apply Now Job Number: 162456 Back to All Jobs

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: * HS diploma or GED preferred. * At least two years of work experience, preferably in an outdoor environment. * One year of loader or forklift experience, certification preferred. * Excellent customer service attitude and skills. * Excellent communication skills, written and verbal. * Positive attitude/High Integrity. * Ability to operate heavy equipment. * Must be able to multi-task in a fast-paced environment. * Strong attention to detail. * Occasional O.T. as needed. * Bilingual skills a plus. Pay: $18.00 - $20.29/ Hour. Benefits Summary: * Medical/Dental/Vision * 401k plus a company match * ESPP - Employee Stock Purchase Plan * EAP - Employee Assistance Program (no cost to you) * Vacation & Sick pay * Paid Company Holidays * Life and AD&D Insurance * Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: * E-verify Participation * Right to Work

Job DescriptionDescription: Operators are instrumental to the company's success. Safety, efficiency and pride are key attributes of an excellent operator. All operators are required to be safe and be responsible for their assigned equipment. We are 100% SC Certified Drug Free Workplace RESPONSIBILITIES To operate equipment safely, and efficiently while adhering to all company policies and MSHA/OSHA regulations, while meeting all production goals. · Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies and procedures · Perform daily safety and maintenance checks · Clean heavy equipment as scheduled and/or required · Ensure heavy equipment is safely and securely stored · Participate in routine maintenance to include but not limited to greasing and fueling equipment daily · Practice workplace safety · General daily preventative equipment maintenance · Light labor work as needed Heavy Equipment can be defined as: · Excavator (GPS Experience) · Haul truck (rigid frame / articulated) · Bulldozer (GPS Experience) · Motor grader · Roller · Water truck · Backhoe · Farm tractor KNOWLEDGE, SKILLS, PERSONAL ATTRIBUTES AND REQUIREMENTS Knowledge · Equipment operation and maintenance · Equipment safety · General site preparation techniques and procedures · Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment · Knowledge of equipment maintenance and storage · Knowledge of workplace safety requirements and procedures · Knowledge of equipment cleaning standards and procedures Skills: · Ability to operate all types of equipment according to the manufacturers recommendations · Ability to operate required equipment in a safe and responsible manner · Client service and public interaction skills · Team building · Analytical and problem solving skills · Decision making skills · Effective verbal and listening communications skills · Ability to communicate effectively in English · Ability to read and write to record pickups and maintain daily records · Stress management skills · Time management skills Personal Attributes: · Be honest, trustworthy and respectful · Possess cultural awareness and sensitivity · Be flexible · Demonstrate sound work ethics · Deal with the public in a positive, courteous and respectful manner Requirements: · Must have a valid driver's license with less than (3) moving violations in (3) years · Must be able to pass drug / alcohol screenings · Must be able to lift at least 40 lbs. · Must be able to pass a Physical WORKING CONDITIONS Physical Demands: The Heavy Equipment Operator has a physically strenuous and mentally demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The Heavy Equipment Operator will have to work in all weather, and must be prepared for both extreme heat and cold. The Heavy Equipment Operator must ensure that all activities are completed in a safe and efficient way. Environmental Conditions: The Heavy Equipment Operator must work outside in all different weather conditions including extreme cold and extreme heat. He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Sensory Demands: He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Mental Demands: The Heavy Equipment Operator must work both independently and with the team and is expected to maintain a schedule of work. Any problems or inconveniences may result in increased stress to complete tasks in a limited time. Requirements:

The Machine Operator is responsible for programming, setting up, and operating a computer numerical control (CNC) machine while maintaining high quality and safety standards. Primary Responsibilities Read drawings Program CNC machine Estimate structural weights Read and use structural shapes charts Use layout and multing techniques to maximize material yields Take initiative and assist in the resolution of production problems Monitor performance, check output quality, and make adjustments as needed to maintain consistent production All other duties as assigned Qualifications and Requirements Knowledge of Robot Machine Certified crane operator (complex) Understand production processes Ability to perform numerical conversions (i.e., decimals to fractions) Good verbal communication skills Good technical skills Detail oriented Bending, lifting, twisting, and standing required to perform job duties Education High school diploma

Job DescriptionDescription: INDEVCO North America (INA) is seeking a skilled and experienced Extrusion Operator specialized in Blown Film production to join our manufacturing team. The ideal candidate will be responsible for the efficient operation of extrusion machinery, ensuring the production of high-quality blown film products. The Extrusion Operator will play a crucial role in maintaining optimal machine performance, troubleshooting issues, and adhering to safety and quality standards. Requirements: Operate and monitor blown film extrusion machinery to produce quality film products according to production specifications. Set up, adjust, and control machine settings, such as temperatures, speeds, and thickness, to achieve desired product characteristics. Conduct routine equipment checks and preventative maintenance to ensure continuous and efficient operation. Monitor product quality throughout the production process, making necessary adjustments to maintain consistent quality standards. Conduct visual inspections and measurements of finished products to ensure they meet customer and company specifications. Troubleshoot and address any issues related to product defects or deviations from quality standards. Adhere to all safety protocols and guidelines to ensure a safe working environment. Operate machinery in compliance with company policies, industry regulations, and quality standards. Report any safety incidents, equipment malfunctions, or maintenance needs promptly. Maintain accurate production records, including machine settings, production rates, and quality control data. Complete required documentation and reports in a timely and accurate manner. Requirements High school diploma or equivalent. Additional technical or vocational training in extrusion operations is a plus. Proven experience as an Extrusion Operator, with a focus on blown film production. Familiarity with the operation and maintenance of blown film extrusion machinery. Ability to set up, operate, and troubleshoot blown film extrusion equipment. Basic understanding of mechanical and electrical systems related to extrusion machinery. Strong attention to detail and commitment to producing high-quality products. Knowledge of safety procedures and a commitment to maintaining a safe work environment. Effective communication skills, both verbal and written. Ability to work collaboratively in a team environment. Ability to lift and move heavy materials as needed. Comfortable working in a manufacturing environment with exposure to noise, dust, and varying temperatures. At INDEVCO, we provide our employees with a highly competitive benefits package, including life, medical, and dental insurance coverage, a 401(K)-matching plan, paid vacation, and an Employee Tuition Reimbursement benefit for professional certifications and degree programs. INDEVCO North America, Inc. is an equal opportunity employer. We embrace diversity and are dedicated to fostering an inclusive environment for all our employees.

Turner Staffing Group - Heavy Equipment Operator Do you love mining? Do you think differently? Are you ready to define the future of this industry? We've been waiting for you! Turner Staffing Group is committed to changing the way mining companies do business. We develop our people. We partner with our clients. We believe in win, win, win. We are looking for a dynamic and talented mining Heavy Equipment Operators for our fast-growing, forward thinking mining client in Columbia, SC. Turner Staffing Group is seeking an energetic mining professionals who can leverage their mining knowledge to expand upon our fast-growing business, creating best practices for equipment operations to ensure profitable operations. You You want to work for a company that is rapidly changing the way the largest materials producers do business. You are motivated by solving problems and partnering with our clients and suppliers. You want to work with great people and enjoy being a part of a strong team. You are a knowledgeable Operator who is not afraid to jump into every detail. You want to be in a place where continuous learning and growth is the norm. You are adaptable and able to juggle multiple initiatives concurrently. Responsibilities: Operating heavy equipment including loaders, skid steers, and other pieces of heavy equipment in a production environment Performing all pre-shift inspections, some basic maintenance and upkeep Working with teammates on crew to maximize production while always maintaining our safety rules and regulations. Requirements: Safety oriented, awareness of everyone and everything that is around you Strong work ethic Willingness to learn Ability to be flexible and to adapt Experience with heavy equipment Preferred to have MSHA training

Requirements Minimum Requirements: High School Diploma or equivalent Minimum of 2 to 4 years safely operating heavy equipment in an industrial, or construction environments. Basic mechanical knowledge to identify and report equipment issues. Effective communication skills. Ability to adapt to fast-paced operations and changing priorities. Valid driver's license in state of residence; CDL preferred but not required. Physical Requirements: Ability to sit, climb, and operate heavy equipment for extended periods. Ability to life up to 50 lbs regularly; occasionally lifting heavier loads with assistance. Ability to climb, stoop, bend, squat, lift, stretch, push, pull, twist, kneel, stand, walk, sit, and reach. Ability to work in uneven terrain, pits, and stockpile areas. Ability to work outdoors in varying weather conditions (heat, cold, rain, dust). Ability to work a flexible schedule and overtime as needed.

Job Description We are seeking a skilled and safety-conscious Heavy Equipment Operator to join our team. The ideal candidate will be responsible for operating a variety of heavy machinery used in construction, excavation, and site development projects. This role requires precision, attention to detail, and a strong commitment to safety and efficiency. Duties/Responsibilities: Operate heavy equipment such as dozers, excavators, loaders, haul trucks, scrapers and rollers. Perform daily inspections and maintenance of equipment to ensure optimal performance. Monitor and report equipment malfunctions or safety hazards. Follow site plans and instructions from site supervisors to complete tasks accurately and on schedule. Ensure compliance with quality and environmental regulations. Safely load and unload materials and equipment. Collaborate with site supervisors and other team members to ensure smooth operations. Ability to lift a minimum of 50 pounds. Comply with all company policies and procedures. Essential Requirements: Must be willing and able to travel out of town, and/or out of state to work on job sites. Must have reliable transportation. Align with our company core values of Better Every Day, Mindful in Everything, Humble Hearts/Open Hands and Everyone Matters. Must have good work ethics: Be on time, work hard and willing to learn. Must be able to pay high degree of attention to safety and promote a safe work environment. Possesses keen observation skills; pays attention to and remembers work related instructions, demonstrations, and procedures. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to prioritize tasks. Preferred Qualifications: Experience with GPS or automated control systems on equipment. Ability to read and interpret blueprints, maps, and site plans. Benefits Competitive Salary - Paid Weekly Medical Health Insurance Benefits after 30 days Vision & Dental Insurance Life Insurance Programs 401k after 6 months of service plus company match Corporate Giving Match Vacation/Paid Time Off after 120-day probationary period Equal Opportunity Employer Powered by JazzHR tix5AXYj4s

Job DescriptionMachine Operator / Assembler - Multiple Shifts - Newberry, SC GPS is hiring for immediate Machine Operator and Assembler positions across multiple shifts in Newberry, SC. Why Apply? and shift) • Long-term position with potential for hire • On-the-job training and advancement opportunities • Exceptional benefits package after hire, including: - Medical, 401(k), 32 personal leave hours - Quarterly attendance bonus, referral bonus, birthday canteen bucks Available Shifts: • Day Shift (Mon-Thu, 6 AM-6 PM) • Night Shift (Mon-Thu, 6 PM-6 AM) • Weekend Shift (Fri-Sun, 6 AM-6 PM) What You'll Do: • Set up and operate machines and/or perform assembly tasks • Load materials, install tooling, and cut, label, and package parts • Inspect parts for quality and troubleshoot operational issues • Follow safety guidelines and maintain a clean work area • Perform repetitive tasks and lift up to 50 lbs What You Need: • Stable work history with verifiable references • 1 year of machine operation or general labor experience preferred • Ability to use and read a tape measure and perform basic math • Physical stamina to stand, lift, stretch, and bend • Reliable attendance and punctuality A drug-free workplace and a criminal background check are required. EOE

For description, visit PDF: ************ sumtersc. gov/sites/default/files/uploads/Departments/HumanResources/Jobs/automated_heavy_equipment_operator-sanitation. pdf

GENERAL SUMMARY: Coordinates activities of workers engaged in setting up and operating arc welding machine that seam-welds rolled plate to form large diameter spiral fabricated pipe by performing the following duties. MINIMUM QUALIFICATIONS: To perform the job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. ESSENTIAL FUNCTIONS/RESPONSIBILITIES: include the following: (Other duties may be assigned, including but not limited to cross training and housekeeping. Responsibilities also include attention to safety according to all safety rules.) In addition to the duties of cutoff, tracker and floor: In conjunction with department team leader, reviews daily work schedule and specification sheets for current material and process requirements; directs and assists crew members with setup for daily runs. Ensures mill machine is kept running by observing and correcting problems that arise. Monitors quality of alignment and weld process. Monitors and resolves employee issues; conducts and/or recommends employee discipline if required. Performs preventive maintenance and minor repairs to mill machinery and equipment. Refers electrical and hydraulic problems to maintenance department for resolution. Develops, recommends, and implements measures to improve production methods, equipment performance, and quality of product. Brings safety issues to the attention of department manager or safety manager. Loads coils onto the back of machine. Verifies that all positions have been checked and ready to start. Performs other tasks as instructed by supervision. PHYSICAL/ENVIRONMENTAL REQUIREMENTS: While performing the duties of this job, the employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is frequently required to stoop, kneel, crouch, or crawl. The employee is occasionally required to sit, reach with hands and arms and climb or balance. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly exposed to moving mechanical parts. The employee is frequently exposed to fumes or airborne particles. The employee is occasionally exposed to extreme heat. The noise level in the work environment is usually loud.

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Pay: $18.00 - $20.29/ Hour. Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Full-time Description Operators are instrumental to the company's success. Safety, efficiency and pride are key attributes of an excellent operator. All operators are required to be safe and be responsible for their assigned equipment. We are 100% SC Certified Drug Free Workplace RESPONSIBILITIES To operate equipment safely, and efficiently while adhering to all company policies and MSHA/OSHA regulations, while meeting all production goals. · Operate all heavy equipment in a safe and efficient way according to all relevant legislation, policies and procedures · Perform daily safety and maintenance checks · Clean heavy equipment as scheduled and/or required · Ensure heavy equipment is safely and securely stored · Participate in routine maintenance to include but not limited to greasing and fueling equipment daily · Practice workplace safety · General daily preventative equipment maintenance · Light labor work as needed Heavy Equipment can be defined as: · Excavator (GPS Experience) · Haul truck (rigid frame / articulated) · Bulldozer (GPS Experience) · Motor grader · Roller · Water truck · Backhoe · Farm tractor KNOWLEDGE, SKILLS, PERSONAL ATTRIBUTES AND REQUIREMENTS Knowledge · Equipment operation and maintenance · Equipment safety · General site preparation techniques and procedures · Knowledge of operation of front end loaders, dozers, graders, compactors, and other pieces of heavy equipment · Knowledge of equipment maintenance and storage · Knowledge of workplace safety requirements and procedures · Knowledge of equipment cleaning standards and procedures Skills: · Ability to operate all types of equipment according to the manufacturers recommendations · Ability to operate required equipment in a safe and responsible manner · Client service and public interaction skills · Team building · Analytical and problem solving skills · Decision making skills · Effective verbal and listening communications skills · Ability to communicate effectively in English · Ability to read and write to record pickups and maintain daily records · Stress management skills · Time management skills Personal Attributes: · Be honest, trustworthy and respectful · Possess cultural awareness and sensitivity · Be flexible · Demonstrate sound work ethics · Deal with the public in a positive, courteous and respectful manner Requirements: · Must have a valid driver's license with less than (3) moving violations in (3) years · Must be able to pass drug / alcohol screenings · Must be able to lift at least 40 lbs. · Must be able to pass a Physical WORKING CONDITIONS Physical Demands: The Heavy Equipment Operator has a physically strenuous and mentally demanding job. He/she will be lifting, pulling and managing heavy equipment and objects. The Heavy Equipment Operator will have to work in all weather, and must be prepared for both extreme heat and cold. The Heavy Equipment Operator must ensure that all activities are completed in a safe and efficient way. Environmental Conditions: The Heavy Equipment Operator must work outside in all different weather conditions including extreme cold and extreme heat. He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Sensory Demands: He/she may at times be exposed to dangerous and/or toxic substances and must take necessary precautions to protect eyes, nose and skin from irritation and infection. Mental Demands: The Heavy Equipment Operator must work both independently and with the team and is expected to maintain a schedule of work. Any problems or inconveniences may result in increased stress to complete tasks in a limited time.

For description, visit PDF: ************ sumtersc. gov/sites/default/files/uploads/Departments/HumanResources/Jobs/heavy_equipment_operator_i-sanitation. pdf