Operator jobs in Mack, OH

Launch Your Career with ConGlobal ConGlobal is hiring immediately for a key role in our global supply chain operations. Whether you're looking to grow your career or gain new skills, this role offers paid training, competitive pay, excellent benefits, and long-term advancement opportunities. 📍 Location: 1276 W. 8th Street Cincinnati, Ohio 45203 United States 💲 Starting Pay: Apprentice (No Experience): $20.90/hour Journeyman (With Experience): $23.42/hour 🕐 Status: Full-Time | Immediate Hire 🕔 Schedule: Open availability required, Night Shift 2:00PM-12:00AM including weekends, and holidays. 🚗 IMPORTANT: A VALID DRIVER'S LICENSE IS REQUIRED FOR THIS POSITION 🚗 Applications without a valid driver's license will not be considered. Responsibilities: About the Role: As an Intermodal Equipment Operator (also known as a Terminal Operator), you'll play a critical role in the safe and efficient movement of shipping containers within our intermodal yard. You'll operate specialized equipment-such as hostlers, cranes, top loaders, and side loaders-to load, unload, and relocate containers as part of our daily logistics operations. Your work ensures containers are handled accurately and safely, keeping freight moving on time. Key Responsibilities: Operate heavy equipment to load and unload shipping containers from railcars and trucks. Drive hostlers to position containers and chassis within the yard. Use top loaders, side loaders, and/or cranes to stack, move, and organize containers. Perform equipment inspections before and after use to ensure operational safety. Communicate with yard personnel and supervisors to coordinate moves and tasks. Maintain a safe work environment by following established protocols and procedures. Qualifications: Previous experience operating heavy equipment or machinery in a logistics or industrial environment preferred Strong commitment to safety and attention to detail. Ability to work outdoors in all weather conditions and perform physically demanding tasks. Willingness to work flexible schedules, including weekends and holidays. Basic communication skills and ability to work as part of a team. Ability to lift up to 50lbs Ability to climb ladders and stairs both off and on railcars Valid driver's license Must pass a pre-employment background verification, physical and drug screening The Federal Rail Administration sets and enforces safety regulations and standards for railroad operations. Use of cannabis is strictly prohibited. If applicable for the position you are applying to, and if you are offered the position, you will have to take and pass a drug screen. Open availability required, Night Shift 2:00PM-12:00AM including weekends, and holidays. Preferred Qualifications: Experience in intermodal or rail yard operations. Familiarity with container handling equipment such as hostlers, top loaders, or cranes. CDL or equipment certifications a plus, but not required. We offer competitive pay, medical/dental/vision benefits, 401(k), paid training, career advancement and more.

The Mill Machinist has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on Multi-Axis Mill and Lathe machines, including loading and unloading of parts, part inspection, tool holder preparation and insert changing; cleans and performs preventive maintenance and minor adjustments of assigned equipment; prepares various logs and records to document machine operation and daily production; enters required data into computer; moves/transports parts to appropriate location as needed; handles parts in a manner to prevent damage; maintains safe, clean and orderly work areas; receives, reviews, and /or refers to various records or reports including travelers, shift reports, SOPs, safety sheets, etc.; prepares labor sheets and non-conformance forms; interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, engineering, and other shop personnel; operates height gage, micrometers, scooter gauges, various power tools, computers, etc.; performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Produce effectively and efficiently within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective action when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Function effectively within a team environment * Perform miscellaneous duties and projects as assigned and required * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability in the area of machining * Must have High School Diploma or equivalent- documentation required * Must meet ITAR definition of US Person(s)- documentation required * Must have an understanding of the machining process * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers, dial calipers, height gage, scooter gages, computers and indicators accurately * Must be able to calculate dimensions and tolerances using knowledge of mathematics * Must be able to follow verbal and written instructions in English * Must be able to clearly communicate information to others verbally and in writing in English * Perform any other task management deems necessary or needed by the company * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment drug testing will be required. Preferable Experience: 3 - 5 years' experience in Lathe machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, move throughout the facility, and communicate. The employee must frequently lift/or move up to 35 pounds, occasionally up to 50 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required personal protective equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast-paced with a strong commitment to accountability. This posting is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required in this job. To apply, please submit resume noting job inquiry ID#605200325 to the Human Resources Department by email at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. Will remain posted until filled.

**Now hiring! Chemical Operator** **Cincinnati, OH.** **Pay Range: Starting at $28 hourly - 24/7 | Rotating Shifts, overtime eligible!** We are looking for a Chemical Operator to join our Care Chemicals (EM) team in Cincinnati, OH. **Come create chemistry with us!** As the leading global chemical supplier for the personal care, home care, industrial and institutional cleaning industries, and technical applications in the agrochemical industry, BASF Care Chemicals is focused on partnering with customers to create innovative solutions with great speed and agility to meet the current and future needs of society in a more sustainable way. We are proud to contribute to the long-term success of our customers' brands by offering a broad range of products and concepts such as common household items, like cosmetics, detergents and cleaners, as well as industrial products and processes like crop protection, rubber belts, hoses, concrete, and metal plating. At Care Chemicals, we not only care about supporting our customers and achieving strong business results; we care about our team members. We aim to create a motivating, inspiring and inclusive work environment where all team members feel supported, heard and developed. Being part of our team means showing up every day to work collaboratively across functions to win for the overall success of the team. We value bringing diverse perspectives and backgrounds together to stretch our teams to think differently, have the courage to speak up and challenge the status quo, and problem solve for the greater good of our customers and society. We as the Care Chemicals division of BASF carry the passion to care in our DNA: we care for our customers, consumers, employees, society and our planet. Come, be a part of our team and create Care Chemicals with us. As a chemical operator you will be responsible for the safe and efficient operation of the production equipment inthe Cincinnati, OH plant. This includes operation of chemical processing equipment; including reactors, refining,and filtration systems. Also involves the transfer of material to and from other departments as necessary andloading of tank trucks and rail cars for customer shipments. **During your rotating shift as a Chemical Operator, you will** + Load and unload tanks and rail cars and receipt of truck deliveries, in addition to perform collection of samplesfrom tank cars and vessels. + Conduct visual inspection of operating equipment to determine current operating status whilst demonstrateeffective operations of the DCS in daily work environment. + Read, record, and interpret data of instruments (reactors, tanks, pumps, filtration systems, etc.) and makecorrective adjustments as required for efficient production runs. + Demonstrate proficiency at operating all production equipment, with minimal supervision, as well as use ofcomputer systems to complete work assignments. + Participate in all required safety training and wear proper personal protective equipment when working in theplant area. + Perform housekeeping to maintain production and operations in a neat and orderly condition. + Work and communicate effectively with Supply Chain Planners, Logistics Planner, Production Coordinator,Maintenance, Lab, team members, etc. to accomplish high quality standards that meet/exceed customerrequirements. + Support and adhere to the principles of the American Chemistry Council's Responsible Care , EPA and OSHAinitiatives by protecting the environment, health, safety and security of our employees, contractors, carriers,distributors, visitors, customers, and neighbors. **If you...** + Hold a High School Diploma or GED required. + Preferrably possess a minimum 2 years working in a manufacturing environment. + Bring DCS console operating knowledge and SAP (preferred). + Possess excellent safety standards and strong troubleshooting skills. **Create your own chemistry with you@BASF** At BASF, you will have the chance to do meaningful work towards building a more sustainable future. In addition to competitive compensation and benefits, BASF provides you with access to a wide range of elements to help you be your best. It's what we call **you@BASF** . We are committed to providing benefits, programs, and opportunities that support our employees' overall well-being, personal growth, and a safe, collaborative, and inclusive work environment. Just some of the many benefits we offer include: + Flexible work arrangements whenever possible + Highly competitive retirement savings plan with company match and investment options + Well-being programs that include comprehensive mental health support for you and your household family members + Family forming benefits (fertility, adoption and surrogacy reimbursement, maternity/parental leave, and more) + Back-up child and elder care with discount programs for families of all ages and stages + Mentoring and career development opportunities that allow you to share, learn, and thrive + Matching gifts program that allows you to deepen the impact of your contributions to qualified charities. + Employee crisis support for when the unexpected happens + Access to our BASF wine cellar, employee discounts, and much more! **About us** As one of the largest chemical companies in North America we have been finding solutions for your everyday needs and addressing the most complex economic, environmental, and sustainability challenges for more than 150 years! At BASF we empower our employees with the tools, guidance and opportunities they need to advance and succeed in work and life. Giving you the support you need to be your best and fulfill your personal ambitions is what helps us create chemistry. After all, our success is linked to yours. Whatever path you envision, BASF is a great place to build a rewarding, successful career. Belong to Something Bigger. #belongat BASF **Privacy statement** BASF takes security & data privacy very seriously. We will never request financial information of any kind via email, private text message or direct message on any social medial platform or job board. Furthermore, we will never send a candidate a check for equipment or request any type of payment during the job application process. If you have experienced any of the above, please contact ************* to report fraud. **Equal employment opportunities** We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, age, citizenship, color, religion, sex, marital status, national origin, disability status, gender identity or expression, protected veteran status, or any other characteristic protected by law. Applicants must be currently authorized to work in the United States on a full-time basis.

Excavator Operator Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. We are growing and have an excellent opportunity for a Skilled Heavy Equipment Operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities Operates back-hoe, mini-excavator, skid steers, and/or other excavation machinery equipped with scoops, shovels, or buckets to excavate and load loose materials on residential and commercial job sites. Load, unload and secure equipment on transport trailers according to guidelines. Follow OSHA and Roto-Rooter safety procedures. Work collaboratively with a crew to efficiently complete excavation work on various projects. Interact with customers as needed, providing excellent customer service and addressing their requirements professionally. Maintain excavation equipment and gather all necessary equipment from the branch and/or rental companies to ensure smooth operations during excavation tasks. Perform excavation work in confined spaces and open trenches, adhering to safety protocols and guidelines. Locate and arrive at job sites promptly, ensuring safe driving and operation of service vehicles between locations. Requirements Essential requirement: Construction experience in both residential and commercial projects. Mandatory requirement: Possession of a current CDL Class A license for this position. Trenchless water, sewer & gas experience is a plus. Ability to work a flexible schedule, including nights and weekends, as required for the role. Complete jobs within specified timelines. Benefits At Roto-Rooter we believe our greatest investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: Medical insurance with a Prescription Drug Card Accident and Critical Illness Insurance Dental Insurance Vision Insurance Paid Vacation Paid Training Life Insurance Matching 401K Retirement Savings Plan Tuition Reimbursement Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout our 86 years in business, we've found that military training and structure are a great fit at our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND34 #LI-ONSITE Not ready to apply? Connect with us for general consideration.

If you've got a passion for heavy equipment, loved tonka toys as a kid, enjoy time outdoors, & get gratification working with a team to build a better environment for the next generation, Levy invites you to play in our sandbox. The Levy Group of Companies is seeking Heavy Equipment Operators to work at our Levy Gallatin Mill Services location in Ghent, KY. The Heavy Equipment Operators perform all functions as it pertains to operating heavy off-road mobile equipment. Pay: $20-$30/hr; plus $2/hr shift differential on nights Shift: Rotating Schedule - 4 on/4 off; 12-hour shifts, 1 week of days, 1 week of afternoons, 1 week of nights Benefits Competitive benefits package including Medical, Dental, Prescription, 401(K) with 3% Employer Contribution, Long- and Short-term Disability Year round, non-weather dependent employment Tuition Reimbursement for qualified skilled trade programs Student Loan Repayment Program Employee Referral Program Responsibilities The Heavy Mobile Equipment Operator will: Operate various heavy mobile equipment such as: Water Trucks, 988K Front End Loaders, Excavators, 777 Haul Trucks, D8/9 Dozers, Pot Haulers, & Sennebogen Cranes Comply with all safety regulations, policies, and record-keeping Load materials in designated areas Maintain work area to allow safe movement and access Monitor any change in machine performance to identify potential malfunctions & report to the maintenance department Perform daily machine inspection and routine greasing, oiling, and fueling Meet customer service expectations Skills The ideal candidate will have: Experience operating end loader, excavator, dozer, and other specialized mobile equipment A team and safety oriented mentality Ability to lift up to 50lbs Basic Mechanical aptitude. Knowledge of bulk materials Good verbal and written communication skills. Willingness to perform other duties as assigned. High school diploma or equivalent To Apply Please submit your resume. Military Members are welcome and Veterans are encouraged to apply! Who is Edw. C. Levy Group of Companies? We are a unique, 100-year-old family-owned company that transforms our recycled products into construction materials, lightweight aggregates, asphalt, cement, concrete, agricultural products, and more. We provide steel mill services, flame cutting and treatment, road building, logistics, laboratory testing, and a variety of other solutions for our customers. The Levy Group of Companies is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, genetic information, pregnancy, veteran status or any other protected characteristic as outlined by federal, state, or local laws. This policy applies to all employment practices within our organization, including hiring, recruiting, promotion, termination, layoff, recall, leave of absence, compensation, benefits, training, and apprenticeship. The Levy Group of Companies makes hiring decisions based solely on qualifications, merit, and business needs at the time.

Job Description IronRoad is conducting a confidential search for a Mazak Integrex Operator. This is a direct hire position for our Fairfield, Ohio client. We are looking for a detail-oriented operator and or skilled machinist that has hands on with Mazak Integrex multi axis machines. We are looking for someone who wants to come to work every day, do their job and be compensated well to include a $2.00 shift differential for this second shift position. You will be working four ten-hour days and more if you would like to work some overtime. We are looking for a team member with a great vibe. If that is you, we would love to hear from you and meet you! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio, 45014 Job type: Full time General Description: We are seeking an experienced and motivated Mazak Integrex Operator to join our team on second shift. This position is responsible for the setup, operation, and maintenance of Mazak Integrex multi-axis CNC machines to produce precision components to specification. The ideal candidate will have hands-on experience with Mazatrol programming and the ability to read and interpret complex blueprints. Reports to: Production Supervisor Key Responsibilities: • Set up and operate Mazak Integrex CNC machines for precision machining operations. • Edit and make minor modifications to Mazatrol programs as needed to ensure part accuracy. • Read and interpret blueprints, work orders, and job specifications to determine machine setup and operations. • Perform in-process inspections using measuring tools such as micrometers, calipers, and gauges to verify part conformance. • Monitor machine operations and adjust feeds, speeds, and tooling to optimize quality and efficiency. • Perform routine machine maintenance, including tool changes and cleaning. • Document production information and maintain accurate records of work performed. • Communicate effectively with team members and supervisors regarding production status and issues. • Follow all safety procedures and maintain a clean and organized work area. Preferred Qualifications: • Minimum of 2 years' experience operating Mazak Integrex CNC machines or similar multi-axis CNC machines. • Working knowledge of Mazatrol programming. • Working knowledge of Mazatrol programming • Proficiency with precision measuring instruments. • Strong mechanical aptitude and troubleshooting skills. • Ability to work independently with minimal supervision. • Willingness to work overtime as needed. • Prior experience in a production environment. Physical Requirements: • Ability to stand for extended periods and lift up-to 50 lbs. as needed. • Manual dexterity and good hand-eye coordination. Shift & Compensation • Second Shift: • $2.00 Shift Differential for 2nd Shift • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Do you have a Minimum of 2 years' experience operating Mazak Integrex CNC machines or similar multi-axis CNC machines? Do you have a Working knowledge of Mazatrol programming as well as hands on experience with Mazatrol programming? Can you Read and interpret blueprints, work orders, and job specifications to determine machine setup and operations and perform in-process inspections using measuring tools such as micrometers, calipers, and gauges to verify part conformance?

Job DescriptionSalary: $30.00 - $33.00 We are currently accepting applications for Heavy Equipment Operators for the Cincinnati, OH, area. This is a great opportunity to get hired on through a very well-known, respected company. LOCAL EXPERIENCED DOZER, TRACKHOE & LONG REACH OPERATORS NEEDED TRIMBLE EXPEREINCE preferred. MUST BE OSHA 10 CERTIFIED COMPETITIVE WAGES PAID WEEKLY BENEFITS OFFERED INCLUDE Health, Dental, Life and Vision Insurance PTO PAID VACATION FULL TIME 5-7 DAYS A WEEK 8-14 HOUR DAYS Required skills and experience: 3 plus years' experience with heavy equipment operations. This positions main responsibility is operating excavation equipment. Preference will be given to those with other equipment operating experience, in: Compactor, Excavators, Dozer, Long Reach etc. Essential Functions Operate heavy equipment on rough grade work and grade to specifications in and around jobsite. May operate/maintain off road trucks to facilitate hauling, delivery and/or relocation of materials such as sand, gravel and crushed rock. Strong attention to detail and ability to keep excavator/equipment clean and in operating order. Perform Multi-Functions when not operating equipment. Competencies: Ability to follow OSHA safety guidelines as well as those set forth by company policy. Ability to follow instructions of supervisor in order to adhere to job specs, company policies and safety guidelines. Dependable, reliable, fulfilling responsibilities, working independently and as a team striving for excellence with a strong work ethic. Conduct and behavior exemplifying company and industry standards. Required job knowledge, skills and abilities will be discussed at the time of interview. We provide a drug-free workplace to protect the health and safety of our employees and patrons. Employment is contingent upon successfully passing a pre-employment drug screen.

USALCO Fairfield Plant, LLC is a major unit within the manufacturing network of a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, the making of catalysts for oil refining, the housing market and other sectors. The Chemical Operator reports to the Plant Manager or Production Supervisor, depending on shift allocation. The position requires a detail-oriented, self-starter who: incorporates safety and quality into every decision while performing day-to-day tasks, can efficiently operate and maintain chemical processes and equipment to meet manufacturing specifications and achieve maximum productivity without compromising safety or quality, will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers to implement approved changes in a timely manner. The holder of this plant position must be a positive-natured, task-oriented individual with chemical manufacturing experience, significant mechanical aptitude, and a high level of computer literacy. This person must be personally and professionally motivated to work constructively with team members at all levels within the company, to execute job responsibilities with a sense of urgency and to support plant and business initiatives, as well as consistently strive to increase the safety, the quality, and the productivity of the site. The Chemical Operator will be assigned responsibilities in all areas of plant operations, including product manufacturing, equipment maintenance, analytical testing, bulk loading and unloading, and utilization of the company computer systems. Essential Functions: Operating chemical processes and equipment to safely manufacture quality products. Apply all plant safety rules, work guidelines / practices, and procedures. Recommending and being actively involved in implementing improvements and adjustments to processes, equipment, and procedures. Updating and maintaining daily QC data and process samples. Utilizing computers for quality control, inventory control, transportation documents, and other processing purposes. Providing physical labor where needed. Working changing shifts as needed. Other Responsibilities: Keeping all process areas, the laboratory and equipment clean and operational. Unloading railcars, loading tanker trucks and making preparations for shipment. Operating heavy equipment Maintaining laboratory equipment according to procedure and inventory as required. Providing production support to all departments as needed. Developing and applying improvements in processes, equipment and procedures. Performing additional responsibilities and tasks as directed by management. . Requirements: A High School Diploma, and significant mechanical and experience and aptitude. Preferred 3-5 years Chemical manufacturing experience basic college coursework in subjects such as math, chemistry, and statistics. The right individual has a can-do attitude, the ability to be part of a team while operating independently and consistently performs to very high standards. USALCO is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, USALCO does not offer employment visa sponsorships upon hire or in the future.

Job Description Gregory Construction is an industry-recognized, award winning provider of construction services driven by a commitment to continuous improvements. Our portfolio includes numerous successful projects from various markets including civil, industrial, and commercial with our core of complex concrete solutions in each of these areas. Our quality construction services have benefited many customers throughout the past decade including universities, local municipalities, the Department of Transportation, and varying clients in the commercial and industrial industries. We strive to provide a friendly work environment that encourages productivity and a sense of pride while promoting teamwork on every level. We are looking for Heavy Equipment Operators to join our team in New Carlisle, Indiana. We are looking for someone that has a “CAN DO” attitude who will work with his/her team to perform the following and more: Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. Operate machines to spread, smooth, level materials on road beds or other job sites as needed. Observe grade in order to adjust machine settings and indicate. Conduct documented pre-shift inspections of equipment for safety and mechanical defects. Work flexible hours including nights, weekends, and work outside for extended periods during all seasons of the year. Coordinate machine actions in response to hand or audio signals from crew members. Inspect, clean, maintain, and repair equipment, using mechanics' hand tools Know and follow safety regulations. Perform necessary work while complying with all company policies and procedures. Perform additional duties as required or directed by their immediate supervisor or other manager. Experience: 5 years (Required) in the civil construction industry 5 year (Required) verifiable experience in equipment operations Requirements: Driver's License Must be able to pass pre-employment screening (including but not limited to drug screen and background check) This full time position will include paid time off, health insurance, dental insurance and a company matched 401K as well as other perks. Gregory Construction is committed to the success of their clients and employees so additional training and education is available and encouraged. Powered by JazzHR KT1TPiLDmq

Rumpke is a family-owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Heavy Equipment Operators are responsible for safely operating various heavy equipment that perform the spreading, compaction, and/or loading of commercial and residential Municipal Solid Waste (MSW) or recyclable materials. Schedule: Monday-Friday & every other Saturday 5pm-5am Responsibilities of Position: Perform efficient safe operation of all heavy equipment including, but not limited to, bulldozers, graders, excavators, backhoes, front end loaders, wheel loaders, off road dump trucks, and other equipment as required Conduct pre-trip/post-trip inspections on heavy equipment and complete necessary documentation Perform routine maintenance on equipment, (i.e., lubricating, fueling, and cleaning equipment) Operate various equipment for general site preparation, landscaping, snow removal, and/or related assignments Continuously monitor the equipment to ensure proper operation and minimal down time, while also remaining aware of surroundings Interact with internal and external customers Clean waste from equipment body, cab, and wheels throughout the day Performing on-site Roll Off work to switch trash compactors as needed based on locations Operating the yard tractor on site to move and stage trailers as needed based on locations *Specific to Boyd County - Hazardous waste management to safely move waste materials in a manner that does not damage the tanks/containers they are held in or endanger personnel or equipment Perform other duties as assigned Supervisory Responsibility: This position will not manage employees. Skills & Abilities Needed for Position: Must be able to show proficiency on heavy equipment Must be able to successfully complete training on other landfill equipment, as necessary Must be dependable, a self-starter, and able to identify and perform daily operational requirements Must possess good communication skills and be able to communicate effectively and professionally with others Experience & Knowledge Needed for Position: Minimum of three years experience operating heavy equipment such as an excavator, backhoe, dozer, and off-road truck or similar experience preferred Must pass a written and operational test to be certified to operate each piece of heavy equipment *Specific to Boyd County - Must successfully complete hazardous waste management training, as provided in the Personnel Training Plan for Hazardous Waste Job Duties, within six months of employment or assignment to such job duties, along with an annual review of the initial training Physical Requirements in a Regular Workday: Frequently lifting/carrying a max of 10 lbs. Occasionally lifting/carrying a max of 20 lbs. Rarely lifting/carrying a max of 100 lbs. Continuously pushing/pulling a max of 10 lbs. Frequently pushing/pulling a max of 20 lbs. Rarely pushing/pulling a max of 100 lbs. Frequently working outside in changing temperatures, wet/humid conditions. Continuously working in areas of dust, odors, mist, gases, and other airborne matter. Occasionally stooping/kneeling/crouching/crawling. Frequently climbing and/or balancing. Continuously sitting. Rarely standing/walking. Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas. Exposure to residential and commercial waste. Ability to travel between offices, as required. Ability to work flexible hours; expected to work nights and weekends as needed. Ability to work overtime, weekends, and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. *Specific to Boyd County - Occasional work around, or moving of, containers of hazardous waste This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties, and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish an employment contract and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.

Heavy Equipment Operator Job Description Summary: Operates various pieces of heavy equipment (graders, dozers, scrapers, excavators, etc.) to move, level, and distribute earth and to push trees and rocks from land preparatory to constructing roads and buildings. Essential Duties and Responsibilities: Operates assigned equipment safely and efficiently, which could include driving a company vehicle. Performs daily maintenance checks of machinery for fluids, grease, etc. Ability to be fluid/smooth with the machine controls to cut ditches, slopes, grades, clear brush, shape and dress slopes and other earthmoving activities. Maintain grade by either communicating with a grade checker, using machine mounted lasers, or by use on machine mounted GPS as well as without the use of GPS. Ability to setup, set, and take down rotating laser equipment/base station. Must be able to read grade stakes, perform arithmetic, use scale ruler or other basic functions used to determine grade and read blue prints/plans. Must be able to endure a high production environment for extended periods of time. Must be able to operate in tight, congested work areas with multiple other activities occurring immediately around the machine. Understands weight distribution affects stability; rated operating capacity. Understands the importance of safety, efficiency and productivity. Works efficiently with others on his/her crew. Other duties may be assigned Skills/Qualifications: High school diploma or general education degree (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. Ability to read and interpret maps, sketches, drawings, specifications and technical manuals Understands and follows oral and written instructions Works independently in the absence of supervision The ability to work 55 - 60 hours a week including Saturdays. Physical Demands: While performing the duties of this job with or without reasonable accommodation, the employee must have the ability to stand; walk; sit; stoop, kneel, crouch, or crawl for long periods. Must be able to handle and manipulate objects on a repetitive basis. Ability to talk and see well to distinguish between back up alarms, voices, and other normal sounds consistent with construction job sites . The employee is occasionally required to taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 100 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Work Environment: While performing the duties of this job with or without reasonable accommodations, the employee is regularly exposed to moving mechanical parts, fumes, airborne particles, outside weather conditions, and vibrations. The employee is frequently exposed to wet and/or humid conditions as well as heat. The employee is occasionally exposed to high, precarious places. The noise level in the work environment is usually loud.

Job DescriptionSalary: $23.00 - $25.00 Schedule: MondayFriday, 4555 hours/week; occasional Saturdays Loveland Excavating and Paving is seeking a reliable, honest, and hard-working individual to join our growing team. If you're committed to doing great work and showing up with a positive attitude, we want to hear from you. Role Responsibilities Understand and execute daily and weekly work plans Operate safely in all weather conditions Read and interpret construction drawings and layout stakes Operate dozers for bulk and finish grading (experience required) Work independently with minimal supervision Adhere strictly to our Employee Safety Policy Arrive on time, alert, and prepared to work Available to work 40+ hours per week, including occasional Saturdays Required Skills and Qualifications Strong work ethic with a can-do attitude Reliable, team-oriented, and able to motivate others Excellent multitasking and attention to detail Clear communicatorverbal, text, and phone Physically capable of lifting 5075 lbs on rugged terrain Respectful of other crew members and their contributions Time management and self-discipline are essential Operator - 23 years of experience operating heavy equipment Benefits We Offer Medical, Vision, and Dental Insurance 401(k) with Company Match Paid Vacation and Holidays (New Years Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas Day) Enjoyable Work Environment with Social Events Career Growth Opportunities

About Us: Founded in 2012 Faxon Firearms is a leading manufacturer of high-performance firearms and components, known for quality, innovation and service. We are passionate about craftsmanship and continuously improving our products to meet the needs of both professional shooters and enthusiasts. Our company values collaboration, growth, and excellence, offering a dynamic environment for employees to thrive. Join us in shaping the future of the firearms industry! General Description: We are seeking an experienced and motivated Mazak Integrex Operator to join our team on second shift. This position is responsible for the setup, operation, and maintenance of Mazak Integrex multi-axis CNC machines to produce precision components to specification. The ideal candidate will have hands-on experience with Mazatrol programming and the ability to read and interpret complex blueprints. Reports to: Production Supervisor Key Responsibilities: Set up and operate Mazak Integrex CNC machines for precision machining operations. Edit and make minor modifications to Mazatrol programs as needed to ensure part accuracy. Read and interpret blueprints, work orders, and job specifications to determine machine setup and operations. Perform in-process inspections using measuring tools such as micrometers, calipers, and gauges to verify part conformance. Monitor machine operations and adjust feeds, speeds, and tooling to optimize quality and efficiency. Perform routine machine maintenance, including tool changes and cleaning. Document production information and maintain accurate records of work performed. Communicate effectively with team members and supervisors regarding production status and issues. Follow all safety procedures and maintain a clean and organized work area. Preferred Qualifications: Minimum of 2 years' experience operating Mazak Integrex CNC machines or similar multi-axis CNC machines. Working knowledge of Mazatrol programming. Ability to read and interpret complex engineering drawings and blueprints. Proficiency with precision measuring instruments. Strong mechanical aptitude and troubleshooting skills. Ability to work independently with minimal supervision. Willingness to work overtime as needed. Prior experience in a production environment. Physical Requirements: Ability to stand for extended periods and lift up to 50 lbs as needed. Manual dexterity and good hand-eye coordination. First Shift: Shift Differential may apply Competitive hourly wage based on experience Overtime opportunities available Benefits Health, dental, and vision insurance 401(k) with company match Paid holidays and PTO Training and advancement opportunities This position involves access to technical data and information governed by the International Traffic in Arms Regulations (ITAR). Under ITAR, candidates must be U.S. persons to be eligible for this role. A U.S. person is defined as a: U.S. citizen, Lawful permanent resident (Green Card holder), or Individual granted asylum or refugee status under U.S. law. Applicants who do not meet these requirements cannot be considered.

Excavator Operator Founded in 1935, Roto-Rooter is North America's largest plumbing, drain cleaning, and water cleanup services provider. Roto-Rooter operates businesses in over 100 company-owned branches, independent contractor territories, and approximately 400 independent franchise operations, serving approximately 90% of the U.S. population and parts of Canada. If job security, top pay, excellent benefits, and career advancement representing a well-known national brand are what you're looking for, Roto-Rooter is the company for you. We pride ourselves on being a great place to work, providing excellent pay, flexible work schedules and top benefits. We are growing and have an excellent opportunity for a Skilled Heavy Equipment Operator, especially backhoe and/mini excavator for sewer & water service repairs/replacements. Responsibilities Operates back-hoe, mini-excavator, skid steers, and/or other excavation machinery equipped with scoops, shovels, or buckets to excavate and load loose materials on residential and commercial job sites. Load, unload and secure equipment on transport trailers according to guidelines. Follow OSHA and Roto-Rooter safety procedures. Work collaboratively with a crew to efficiently complete excavation work on various projects. Interact with customers as needed, providing excellent customer service and addressing their requirements professionally. Maintain excavation equipment and gather all necessary equipment from the branch and/or rental companies to ensure smooth operations during excavation tasks. Perform excavation work in confined spaces and open trenches, adhering to safety protocols and guidelines. Locate and arrive at job sites promptly, ensuring safe driving and operation of service vehicles between locations. Requirements Essential requirement: Construction experience in both residential and commercial projects. Mandatory requirement: Possession of a current CDL Class A license for this position. Trenchless water, sewer & gas experience is a plus. Ability to work a flexible schedule, including nights and weekends, as required for the role. Complete jobs within specified timelines. Benefits At Roto-Rooter we believe our greatest investment is in our employees. We prioritize the health and well-being of our team and their families. That's why we offer an extensive employee benefit package including: Medical insurance with a Prescription Drug Card Accident and Critical Illness Insurance Dental Insurance Vision Insurance Paid Vacation Paid Training Life Insurance Matching 401K Retirement Savings Plan Tuition Reimbursement Profit Sharing Roto-Rooter offers excellent career paths for military veterans and personnel transitioning to civilian professions. Throughout our 86 years in business, we've found that military training and structure are a great fit at our company. EEO Statement We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, religion, color, sex, gender, age, national origin, veteran status, military status, disability, gender identity, sexual orientation, genetic information, or any other characteristic protected by law. Advertising Tags IND34 #LI-ONSITE

Machine Operator has the ability to run multiple machines effectively and efficiently on a continuous basis and can identify problems during the production run, position work pieces, and inspect parts on a daily basis using various types of inspection equipment. Job Function: Performs required operations on EDM/multi-axis machines, including loading and unloading of parts, part inspection, electrode preparation and changing; Cleans and performs preventive maintenance and minor adjustments of assigned equipment; Prepares various logs and records to document machine operation and daily production, enters required data into computer; Moves/transports parts to appropriate location as needed; Maintains safe, clean and orderly work areas; Receives, reviews, and /or refers to various records or reports including travelers, SOP, shift reports, safety sheets, etc.; Prepares labor sheets and non-conformance forms; Interacts and communicates with various groups and individuals including the immediate supervisor, co-workers, and other shop personnel; Operates wire machine, grinders, micrometers, gauges, various power tools, computer, etc.; Performs related duties as required. Primary Responsibilities: * Set up and switch jobs as required * Perform tasks efficiently and within standard time allotment * Keep track of materials in the area * Minor maintenance of machine * Maintain an excellent attendance record * Verify all parts are conforming before signing off on traveler * Keep track of all scrap and seek corrective actions when necessary * Run and maintain the function of 2+ machines in a manufacturing cell * Maintain all inspection gauges and tooling as required * Perform miscellaneous duties and projects as assigned and required * Function effectively within a team environment * Adhere to AS9100 and other quality standards Requirements: * Must demonstrate a high ability and understanding in the area of machining * Must have High School Diploma or equivalent (documentation required) * Must meet ITAR definition of US Person (documentation required) * Be able to communicate information clearly verbally and in writing in English * Must be able to run parts to spec on a daily basis on multiple machines * Must be able to read simple part drawings * Must be able to use and read micrometers and dial calipers accurately after company provided training * Must be able to calculate dimensions and tolerances using knowledge of mathematics after company provided training * Must be able to follow verbal and written instructions in English * Perform any other task management deems necessary or needed by the company within employee's capabilities * MTI is a safety sensitive manufacturer. As such, successful results of pre-employment testing will be required. Preferable Experience: * Experience in Conventional machining such as milling, drilling and turning * Previous relevant machining experience or education/training in machining Physical Demands/Work Environment: While performing the duties of this job, the employee is regularly required to stand, use hands, reach with hands and arms, and communicate. Must be able to move throughout the facility. The employee must frequently lift or move up to 35 pounds. Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus. The noise level in the work environment may be loud. Must be able to use required Personal Protective Equipment. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must be able to work in a supportive team environment that is fast paced with a strong commitment to accountability. To apply, please submit your resume noting job inquiry #4051620725 to the Human Resources Department at: ********************************. An Equal Employment Opportunity Employer All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, genetics, or protected veteran status and will not be discriminated against on the basis of disability. This post will expire on Tuesday December 30th, 2025

Job Description IronRoad is conducting a confidential search for a 2nd Shift Live Tool Lathe Operator for our Fairfield, Ohio client. We are looking for someone with a great vibe who comes to work and takes care of business. Detail oriented, focused and wants to be part of a great team. Sound like what you are looking for? Contact us! Hours: Monday - Thursday 5:00 p.m. - 3:00 a.m. Pay Range: $20.00 - $35.00+ per hour based on your skill & experience. Determined by Hiring Manager Shift Differential - $2.00 per hour for 2nd shift Location: Fairfield Ohio 45014 Job type: Full time General Description: The Live Tool CNC Lathe Operator is responsible for the setup, operation, and maintenance of Doosan CNC lathes equipped with live tooling and Fanuc controls to produce precision-machined components. This position plays a critical role in maintaining part quality, machine performance, and overall productivity on the second shift. Candidates must demonstrate a strong understanding of multi-axis turning operations, blueprint reading, tool setups, and in-process inspection techniques. The ideal candidate will be a self-starter who can work independently, troubleshoot minor issues, and contribute to a team-focused manufacturing environment. Reports to: Production Supervisor Responsibilities: • Set up and operate Doosan CNC lathes with live tooling, Y-axis functionality, and Fanuc controls. • Read and interpret engineering drawings, blueprints, and GD&T to ensure machining to spec. • Perform tool changes, set offsets, and make minor G-code edits to maintain tolerances. • Conduct part inspections using precision measuring tools (micrometers, calipers, height gauges, indicators, etc.). • Monitor machine performance and adjust machining parameters for efficiency and tool life. • Ensure parts meet quality and dimensional standards throughout production runs. • Complete required documentation including job travelers, inspection sheets, and production logs. • Collaborate with programming, engineering, and quality teams for troubleshooting and process improvements. • Maintain a clean, safe, and organized work area in accordance with 5S and company safety standards. Qualifications • High school diploma or equivalent required; technical training or machining certificate preferred. • Proficiency in blueprint reading and using standard inspection tools. • Familiarity with G-code programming and ability to make minor edits and offsets at the machine. • Strong understanding of speeds, feeds, cutting tools, and basic machining principles. • Ability to work independently with minimal supervision on second shift. Preferred Qualifications • Minimum 2 years of experience operating CNC lathes, preferably Doosan with Fanuc controls and live tooling. • Experience operating lathes with sub-spindles and Y-axis features. • Background in high-mix, low-volume production environments. • Familiarity with ISO 9001 or AS9100 standards and quality control procedures. • Forklift or overhead crane experience/certification a plus. Physical Requirements • Ability to stand for long periods, lift-up to 50 lbs., and handle repetitive tasks. • Manual dexterity and visual acuity required for precision measurements and fine detail work. Shift & Compensation • Second Shift: • Shift differential may apply • Competitive hourly wage based on experience • Overtime opportunities available Benefits • Health, dental, and vision insurance • 401(k) with company match • Paid holidays and PTO • Training and advancement opportunities Questions: Are you authorized to work in the USA? Do you have reliable transportation to get to and from work? Do you have your high school diploma or equivalent technical training or machining certificate? Required Are you Proficient in blueprint reading and using standard inspection tools? Have you used G-code programming and can you make minor edits and offsets at the machine? Do you have a Strong understanding of speeds, feeds, cutting tools, and basic machining principles? Can you work independently with minimal supervision on second shift?

Gregory Construction is an industry-recognized, award winning provider of construction services driven by a commitment to continuous improvements. Our portfolio includes numerous successful projects from various markets including civil, industrial, and commercial with our core of complex concrete solutions in each of these areas. Our quality construction services have benefited many customers throughout the past decade including universities, local municipalities, the Department of Transportation, and varying clients in the commercial and industrial industries. We strive to provide a friendly work environment that encourages productivity and a sense of pride while promoting teamwork on every level. We are looking for Heavy Equipment Operators to join our team in New Carlisle, Indiana. We are looking for someone that has a “CAN DO” attitude who will work with his/her team to perform the following and more: Load and move dirt, rocks, equipment, or other materials, using trucks, power cranes, shovels, or related equipment. Operate machines to spread, smooth, level materials on road beds or other job sites as needed. Observe grade in order to adjust machine settings and indicate. Conduct documented pre-shift inspections of equipment for safety and mechanical defects. Work flexible hours including nights, weekends, and work outside for extended periods during all seasons of the year. Coordinate machine actions in response to hand or audio signals from crew members. Inspect, clean, maintain, and repair equipment, using mechanics' hand tools Know and follow safety regulations. Perform necessary work while complying with all company policies and procedures. Perform additional duties as required or directed by their immediate supervisor or other manager. Experience: 5 years (Required) in the civil construction industry 5 year (Required) verifiable experience in equipment operations Requirements: Driver's License Must be able to pass pre-employment screening (including but not limited to drug screen and background check) This full time position will include paid time off, health insurance, dental insurance and a company matched 401K as well as other perks. Gregory Construction is committed to the success of their clients and employees so additional training and education is available and encouraged.

Schedule: Monday-Friday, 45-55 hours/week; occasional Saturdays Loveland Excavating and Paving is seeking a reliable, honest, and hard-working individual to join our growing team. If you're committed to doing great work and showing up with a positive attitude, we want to hear from you. Role Responsibilities Understand and execute daily and weekly work plans Operate safely in all weather conditions Read and interpret construction drawings and layout stakes Operate dozers for bulk and finish grading (experience required) Work independently with minimal supervision Adhere strictly to our Employee Safety Policy Arrive on time, alert, and prepared to work Available to work 40+ hours per week, including occasional Saturdays Required Skills and Qualifications Strong work ethic with a can-do attitude Reliable, team-oriented, and able to motivate others Excellent multitasking and attention to detail Clear communicator-verbal, text, and phone Physically capable of lifting 50-75 lbs on rugged terrain Respectful of other crew members and their contributions Time management and self-discipline are essential Operator - 2-3 years of experience operating heavy equipment Benefits We Offer Medical, Vision, and Dental Insurance 401(k) with Company Match Paid Vacation and Holidays (New Year's Day, Memorial Day, Independence Day, Labor Day, Thanksgiving, Christmas Day) Enjoyable Work Environment with Social Events Career Growth Opportunities

6:00PM-8:00AM M-F Rumpke is a family-owned and operated company that ranks as one of the largest firms in the waste and recycling industry. Our mission is simple: to deliver exceptional waste and recycling solutions to our customers and communities through a commitment to safety, service, the environment and the growth of our people. When you join Rumpke, you'll be part of a team providing essential services to millions of residents, businesses, and neighborhoods. You will enjoy competitive pay and comprehensive benefits, including health, dental, vision, matching 401(k), life insurance, paid vacation, and more. This is your opportunity to make a difference for you and your family. Come join our team! Heavy Equipment Operators are responsible for safely operating various heavy equipment that perform the spreading, compaction, and/or loading of commercial and residential Municipal Solid Waste (MSW) or recyclable materials. Responsibilities of Position: Perform efficient safe operation of all heavy equipment including, but not limited to, bulldozers, graders, excavators, backhoes, front end loaders, wheel loaders, off road dump trucks, and other equipment as required Conduct pre-trip/post-trip inspections on heavy equipment and complete necessary documentation Perform routine maintenance on equipment, (i.e., lubricating, fueling, and cleaning equipment) Operate various equipment for general site preparation, landscaping, snow removal, and/or related assignments Continuously monitor the equipment to ensure proper operation and minimal down time, while also remaining aware of surroundings Interact with internal and external customers Clean waste from equipment body, cab, and wheels throughout the day Performing on-site Roll Off work to switch trash compactors as needed based on locations Operating the yard tractor on site to move and stage trailers as needed based on locations *Specific to Boyd County - Hazardous waste management to safely move waste materials in a manner that does not damage the tanks/containers they are held in or endanger personnel or equipment Perform other duties as assigned Supervisory Responsibility: This position will not manage employees. Skills & Abilities Needed for Position: Must be able to show proficiency on heavy equipment Must be able to successfully complete training on other landfill equipment, as necessary Must be dependable, a self-starter, and able to identify and perform daily operational requirements Must possess good communication skills and be able to communicate effectively and professionally with others Experience & Knowledge Needed for Position: Minimum of three years experience operating heavy equipment such as an excavator, backhoe, dozer, and off-road truck or similar experience preferred Must pass a written and operational test to be certified to operate each piece of heavy equipment *Specific to Boyd County - Must successfully complete hazardous waste management training, as provided in the Personnel Training Plan for Hazardous Waste Job Duties, within six months of employment or assignment to such job duties, along with an annual review of the initial training Physical Requirements in a Regular Workday: Frequently lifting/carrying a max of 10 lbs. Occasionally lifting/carrying a max of 20 lbs. Rarely lifting/carrying a max of 100 lbs. Continuously pushing/pulling a max of 10 lbs. Frequently pushing/pulling a max of 20 lbs. Rarely pushing/pulling a max of 100 lbs. Frequently working outside in changing temperatures, wet/humid conditions. Continuously working in areas of dust, odors, mist, gases, and other airborne matter. Occasionally stooping/kneeling/crouching/crawling. Frequently climbing and/or balancing. Continuously sitting. Rarely standing/walking. Additional Working Conditions/Aspects: Possible exposure to high traffic conditions and/or tight driving areas. Exposure to residential and commercial waste. Ability to travel between offices, as required. Ability to work flexible hours; expected to work nights and weekends as needed. Ability to work overtime, weekends, and/or holidays. Legally eligible to work in the United States. Valid driver's license (if applicable). Must successfully complete pre-employment testing. Must be able to read and speak the English language. *Specific to Boyd County - Occasional work around, or moving of, containers of hazardous waste This job description is intended to describe the general nature, complexity, and level of work to be performed by employees assigned to this position and is not to be construed as an exhaustive list of responsibilities, duties, and/or skills required. It does not prescribe or restrict the work that may be assigned. Furthermore, this does not establish an employment contract and is subject to change at the discretion of the company. Rumpke Waste and Recycling is committed to equality in all aspects of employment. It is Rumpke's policy to provide equal opportunities to all employees and potential employees without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, age, protected veteran status, or disability status.