Operator jobs in Tomball, TX

Job Details Experienced HOPPER - TOMBALL, TX Full Time Not Specified None Any ManufacturingDescription Job Title: Robot Operator Reports to: Robot Operator Supervisor Job Type: Hourly, Non-Exempt SUMMARY: Loads and unloads parts in jigs for production robots. REQUIRED COMPETENCIES Loads and unloads parts in jigs for production robots. Helps setup jigs for job changes. Uses start boxes to generate program start/stop Visually inspects parts per sample and per Supervisor. Follows Supervisor directions. Performs general daily maintenance on equipment. Operates forklifts. Upkeep and cleanliness of work areas. Follow company safety & security guidelines Attendance and punctuality are essential functions of this job. Other duties as needed. QUALIFICATIONS To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required DESIRED EDUCATION and/or EXPERIENCE Previous experience On the job training to be provided, as needed, for all assigned responsibilities. PHYSICAL DEMANDS Employee may be required to do the following: climbing into and out of equipment; reaching in all directions, handling and manipulating objects and materials; coordinating the movements of eyes, hands, fingers and feet to operate tools and equipment; lifting up to 40 pounds from ground level, waist level, and/or overhead; carrying objects, tools, equipment, etc.; standing; sitting; walking; pushing; pulling; bending; kneeling; crouching/squatting; crawling; seeing with or without correction; hearing with or without correction. The employee is frequently required to sit while performing the duties of this job (approx. 20%) walk (70%) stand (10%) sit. The employee is expected to lift or move materials (40% of workday) MENTAL DEMANDS Employee may be required to do the following: following set procedures and standards; applying basic mathematical skills; planning work and selecting proper tools; reading and interpreting information; judging distances and accurately; following oral and/or written directions; reading; writing; ability to recognize and report safety hazards WORK ENVIROMENT The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. The noise level in the work environment is moderately loud. The individual who occupies this position must not pose a direct threat to the health or safety of such individual or others in the workplace. This means the individual must not pose a significant risk of substantial harm to the health or safety of the individual or others that cannot be eliminated or reduced by reasonable accommodation. The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. Duties may be assigned and/or reassigned as needed and/or instructed by department manager, general manager or other supervisor. M / F / Disability /Veteran / EOE **********DRUG FREE WORKPLACE******* “FabCorp/Hammonds is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, sexual orientation and gender identity, status as a protected veteran, or disability.”

Job Details Experienced Humble-Shop - Humble, TX Full Time Not Specified None Any Skilled Labor - TradesDescription Employee Value Proposition Working for a world-class leader in building structures and bridges, a Schuff Steel HMO-A brings his/her expertise and knowledge in fabrication to build some of the most complex and high-profile projects in the commercial building, bridge and industrial sectors. Critical to the field of forming material by operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C classification. The HMO-A utilizes a high degree of proficiency while utilizing full skills of the trade including knowledge and understanding of CNC machine programs. To perform this job successfully, an individual must be able to perform each essential responsibility satisfactorily. In return, the Company will offer competitive market-based compensation and comprehensive health insurance benefits. We are committed to professional development and growing our business. We are looking for a professional with a growth mindset who desires a progressive long-term career. Core Responsibilities Layout, read, interpret blueprints, shop drawings and other company documents. Operates heavy steel fabrication machinery according to company requirements. Load and unload equipment with material manually and through the use of an overhead crane or magnet. Perform daily preventative maintenance. Troubleshoot, properly mark and stamp materials. Perform daily cleaning of machines. Locate parts and supplies for machine operation and grind material. Other duties may be assigned. Perform other routine duties per management direction. Must adhere to and follow all safety rules and PPE requirements Education/Training - Work Experience High school diploma or general education degree (GED), and/or 12 months experience; completion of a closely related vocational training course through an accredited school may substitute for the required experience Specialized Knowledge - Certificates & Licenses Equipment Knowledge & Skills - includes the operation of CNC machines and equipment such as Plasma Arc, NC Punch Plasma, Beam Line Machine, Beam Punch Operator and NC Angle Master. Also operates machines under HMO B and C Classification. Overhead cranes and forklifts Language Skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Mathematical Skills: Ability to add, subtract, multiply and divide in all units of measure. Reasoning Ability: Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Certificates, Licenses, Registrations: None DBM Global including its U.S. subsidiaries is an Equal Opportunity Employer with an Affirmative Action Plan *Recruiters* - Resumes submitted without current/valid vendor agreement will become property of DBM Global Inc. Any recruiting/staffing firm or agency wishing to do business with DBM Global must contact the Talent Acquisition Department at **************. Recruiting/staffing firms may NOT contact hiring managers directly. Firms that do not honor this request will be removed from consideration.

- Operates various power-driven machinery used to move dirt or other materials. - May operate all or some of the follow types of equipment: excavator, backhoe, bulldozer, crane, dragline, font-end loader, motor grader, cherry picker, dump truck, etc. RESPONSIBILITIES: - Sets up and operates production equipment in accordance with established guidelines and procedures. - Adjust machine settings to complete tasks according to specification, accurately and in a timely manner. - Move hand and foot levers to control diesel, electric, gasoline or steam-powered operating equipment. - Interprets hand signals to determine where materials are to be placed. - May be required to manipulate equipment on unlevel working surface. - May assist in lifting, position and securing or materials and work pieces during installation. - May be responsible for routine maintenance or repairs. - Responsible for observing and complying with all safety and project rules. - Performs other duties as required. QUALIFICATIONS: - May require a high school diploma or its equivalent with previous years of experience in the field or in a related area. - Has knowledge of commonly-used concepts, practices, and procedures within a particular field. - Relies on instructions and pre-established guidelines to perform the functions of the job. - Works under immediate supervision. - Primary job functions do not typically require exercising independent judgment. - Typically reports to a supervisor or manager. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Under direct supervision, responsible for setup and operation of band saws. Set up and operate power saws (reciprocating, band or circular) to cut materials to required length or contour in accordance with specifications. Install saw blades prescribed for some type of material, set stop gauges, saw speeds and indexing mechanisms such as may be provided for automatic positioning of materials. May be required to replace and align band saw. Position and secure materials on bed of machine using clamping arrangements of fixturing devices; check pilot piece for dimension. Contour cutting on band saw may require the scribing of cutting lines on materials from templates or the setting of radius pins for circular cuts. Duties: * Reads the Sales Order Acknowledgement to determine setup specifications, product dimensions * Starts and controls mechanisms that automatically feeds steel into rollers. * Examines, inspects, and measures finished products to verify conformance to specifications. * Manipulates controls and observes dial indicators in order to monitor, adjust and regulate speeds of machine mechanisms. * Directs and trains mill helper workers to change rolls and operate mill equipment. Minimum Required Procedural Competency: * MFG-L4-2 Tube Milling Procedure * MFG-L4-3 Mill Hook Up and Spooling Procedure * QC-L4-7 Visual Inspection of Strip and Tubing and Defect Removal Procedure * QC-L4-8 Flattening and Flare Testing Procedure Experience: * 3+ years of related experience or equivalent combination of education and experience. This is a safety sensitive position. About FET FET (Forum Energy Technologies, Inc.) is a global company, serving the crude oil, natural gas, and renewable energy industries. FET is headquartered in Houston, TX with quality manufacturing, efficient distribution, and service facilities conveniently located to support the major energy-producing regions of the world. Forum's products and services range from the underwater reservoir to the refinery, from the sea floor to the above ground transportation line. We pride ourselves on giving you a comprehensive offering of solutions to maximize your operations and improve your bottom line. Our customers are our partners and we work with them to solve their ever-changing challenges. FET is an Equal Opportunity Employer. FET does not discriminate on the basis of race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected under federal, state, or local law. All employment decisions and practices at FET are subject to the foregoing non-discrimination provisions and are based solely on merit, competence, performance, and business needs at the time.

Looking for an exciting career? Want to make a career change? R. J. Corman is seeking safe, energetic, fast paced people who enjoy working outside, understand the thrill of accomplishment and hard work to join our Emergency Response Team. Work consists of clearing derailments for our railroad customers across the United States. Perks of the job: Opportunity to travel extensively and work outside Operate heavy or specialized equipment (i.e. Sideboom, Track Loader, Excavator, Vac Truck, Grapple Truck, etc.) Guaranteed 40 hours per week with high potential for overtime Company provided training to obtain CDL-A Hotel and travel expenses paid for Company provided PPE On the job training provided and advancement opportunities Why work for R. J. Corman? Safety is our #1 priority Competitive wages Benefits start day one - health, dental, vision Paid time off - accrual starts day one 401k with generous company match Company paid life insurance 8 company paid holidays Employee assistance program Employee referral program Job Requirements: Key Responsibilities: Transport, operate, and service heavy equipment used in clearing railroad derailments Perform laborer/groundsman duties as needed Practice safe working habits and ensure proper PPE is being used Safely drive, operate, and maintain CDL-A required vehicles and equipment Follow DOT regulations, ensuring proper permits and driving regulations are followed Be comfortable working outside in all weather conditions Communicate with team and supervisor throughout the job process What does it take to be a Heavy Equipment Operator/Laborer for R. J. Corman? Mobility to participate in frequent travel and be on call 24/7 to respond to emergencies Must live within 45 minutes of the R. J. Corman shop Must pass background, drug screen, and physical capacity test Possess current CDL-A and DOT medical card (preferred) Requires lifting of up to 100lbs in performance of duties Love working outside! FMCSA Clearinghouse registration will be required for CDL candidates in order to provide electronic consent for pre-employment queries. Registration can be completed at https://clearinghouse.fmcsa.dot.gov/register Click the link below for step-by-step registration instruction. https://clearinghouse.fmcsa.dot.gov/Resource/Index/Registration-Driver-Instructions R.J Corman Railroad is an Equal Employment Opportunity (EEO) and Affirmative Action employer that is committed to a safe and drug free work place. R.J Corman performs pre-employment criminal background checks and substance abuse testing which includes a urine drug test to detect the presence of illegal drugs. We appreciate your cooperation in keeping R.J Corman a safe and drug free company. Join our team today! Apply online at rjcorman.com/careers

Job Description AERONES, a Global Leader in advanced Wind Turbine maintenance and robotics, is seeking a Wind Turbine Robotics Operator focused on Robotics services to join our U.S. Operations Team. This position is also known as Wind Field Technician. We specialize in cutting-edge robotic solutions that ensure safety, efficiency, and top-tier service for the wind energy industry. In this role, you'll have the opportunity to travel to wind farms across the country, with all accommodation and travel expenses fully covered by the Company. You will be performing inspections, maintenance, repairs, and upgrades on wind turbines - ensuring peak performance and safety standards are met. GWO Basic Safety Training (BST) and GWO Advanced Rescue Training (ART) Full certifications will be required to undertake the role. Job Tasks and Responsibilities: Maintenance and operation of robotic systems used for cleaning, inspection, and repair of wind turbines. Performing routine inspections on turbines to ensure optimal performance and compliance with safety standards. Preventative maintenance on wind turbines and associated systems to reduce downtime and maximize energy production. Fault diagnosis and resolution of technical issues using advanced diagnostic tools and technology. Reporting and documentation of work completed, including identifying issues, repairs, and maintenance performed. Ensuring adherence to safety protocols and industry standards. What We Offer: Stable, long term employment with career growth in a rapidly expanding, innovative Company Competitive hourly rate: $22.50 - $30.00 per hour (based on experience) $60 a day meal per diem Paid travel and lodging for Projects nationwide Work with a Global Team pioneering the future of wind turbine technology What We're Looking For: Strong mechanical and electrical troubleshooting skills Ability to travel frequently and work in Field conditions Previous experience in wind turbine maintenance is an advantage Requirements The minimum requirements to be considered for this role include: Applicants must be legally authorized to work in the United States. We are unable to sponsor Visas at this time. A Valid Drivers License Basic Computer skills Willing and able to undertake a Physical Check (Medical) to ensure ability to undertake the responsibilities of the role (working in confined spaces, climbing, lifting etc). Nice to have: GWO Basic Safety Training (BST) GWO Advanced Rescue Training (ART) Full GWO Basic Technical Training (BTT) OSHA 10 NFPA 70E Electrical safety awareness First Aid GE / Vestas / Siemens Gamesa / Nordex Turbine Operations / LOTO GWO Sea Survival Benefits We believe great work starts with feeling valued and supported. That's why we are building an thoughtful, competitive benefits and perks to help you thrive - professionally and personally - through every step of your Career with us. You will be eligible for: Health Insurance Medical (80% Employer contribution) Dental Vision Term Life Paid Time Off (PTO) - 10 days Aerones is an Equal Opportunity Employer. We are committed to creating a diverse and inclusive workplace and consider all qualified applicants for employment without regard to Race, Color, Religion, Sex, Sexual Orientation, Gender Identity or Expression, National origin, Age, Disability, Veteran Status, or any other legally protected status. Employment decisions are based on qualifications, merit, and business needs. AERONES - Build the Future!

JOB RESPONSIBILITIES As a Traveling Specialty Demolition Heavy Equipment Operator, you must be willing to travel up to 100% of the time with per diem, meals and lodging provided, with an average of three weeks on the road and one long weekend home. All employees must be able to pass a background test and drug screening. Employee Operates and maintains one or more of the following: * Track or rubber tire excavator with mounted hydraulically powered grapple, bucket, shear, processor, hydraulic hammer or other implements/attachments to lift, shear, process, and move materials. * Straight or articulated rubber-tired or solid-tired tractor, equipped with front- mounted hydraulically-powered bucket, scoop or forks, to lift and transport bulk materials to and from storage or processing areas or equipped with a heavy rotating broom to sweep areas clear of debris. * Powered industrial truck equipped with lifting devices such as forklift, boom, scoop, lift beam and swivel hook, fork grapple, clamps, elevating platform or trailer hitch to move materials. * Operates compressors, pumps, or hoists. * Must be able to climb into and dismount from all equipment using built-in ladder/steps to/from heights of 3 to 7 feet from grade * Starts engine, shifts gears, presses pedals, turns steering wheel, levers and/or toggle switches that control the movement of machinery, including forward, backward, rotating on chassis, raising and lowering boom, extending or retracting bucket or other attachment, often in response to hand signals. * Must be competent in industry standard hand signals. * May use equipment to cut and remove metals or concrete from structures, cut and/or process and/or sort scrap metals, break and process concrete, lift and carry heavy objects, grade, shape and form work areas. * Backfill, spread fill and/or stabilization stone, load trucks, move equipment (including rigging and attaching equipment to bucket hook, load dump buckets, transport dump buckets). * Consults load rating chart prior to all major lifts to ensure safe operation within rated capacity of equipment. * Inspect and performs routine maintenance on equipment such as lubricating, fueling, and cleaning as well as makes minor adjustment and repairs to equipment. * When not operating, servicing or repairing equipment, may be required to assist others as needed such as performing manual labor under variable weather conditions including walking or standing for extended periods, exposure to dust, fumes and loud noises, stooping, crouching, and lifting up to 50 pounds. * Communicate with field supervision and management status of tasks, hazards, status of equipment, including the need for equipment maintenance. * Follow all industry and company safety protocols. Be able to identify hazards and implement the correct safety measures. REQUIRED EXPERIENCE As a Traveling Heavy Equipment Operator, you must be willing to travel up to 100% of the time, with an average of three weeks on the road and one long weekend home with per diem, meals and lodging provided. Demolition experience of 5-10+ years of heavy equipment operating experience in a demolition environment. All employees must be able to pass a background test and drug screening. All candidates must be medically capable of wearing a half-faced respirator. SUPERVISORY RESPONSIBILITIES This job may have supervisory responsibilities, including supervising various employees, dealing with customers, directing the movement of vehicles and equipment, and commanding personnel and vehicle/equipment operators COMPENSATION AND BENEFITS Salary offers will be based upon experience. In time, equipment operators may be offered opportunities to learn new skills to advance into specialty equipment operator and leadership positions. D.H. Griffin Companies offer full benefits, paid holidays, 401K w/ company matching, flexible spending program, continuing education opportunities, health & dental and more. No waiting period to use paid time off! Travel expenses, meals and per diem plus lodging will be provided. ABOUT US For over 60 years, D.H. Griffin has been a trusted source for providing specialized and emergency demolition services following structural failure due to fire, natural disasters, explosion or building collapse. From commercial to industrial, and public to private, our wrecking services and demolition contracting are available across all industries and all over the globe. D.H. Griffin's ability to respond quickly and collaborate with first responders has saved lives, mitigated further damage, and allowed for a faster road to recovery. D.H. Griffin is uniquely positioned with the expertise and equipment to quickly and safely provide emergency and customized demolition services wherever and whenever the need arises.

Duties and responsibilities include, but are not limited to: Shipping documentation handling: upon receipt of shipping notices and documents from shipper and/or freight forwarder cross check against purchase orders in the system and work on revision as needed Custom clearance preparation: submission of shipping documents to custom broker for correction and timely entry filing. Harmonized tariff schedules must be checked and verified with custom broker and other resources as well as other information that goes on duty entries. Payment process: processing of various types of payments such as imported merchandise, freight, inland trucking, duty to US Custom and other direct costs. Folder/Journal management: all transactions and payment related documents for all shipments must be timely filed and managed. Managing activities related to trading between different regions and/or countries. Logistics coordination for smooth operation matching up purchases with sales Communication with customers and follow up on request accordingly Purchase/Sales data input to ERP(SAP) system Credit management for customer Perform all other functions requested that are within the scope of this job as deemed necessary or appropriate by manager. Other duties as assigned Duties and responsibilities include, but are not limited to: Shipping documentation handling: upon receipt of shipping notices and documents from shipper and/or freight forwarder cross check against purchase orders in the system and work on revision as needed Custom clearance preparation: submission of shipping documents to custom broker for correction and timely entry filing. Harmonized tariff schedules must be checked and verified with custom broker and other resources as well as other information that goes on duty entries. Payment process: processing of various types of payments such as imported merchandise, freight, inland trucking, duty to US Custom and other direct costs. Folder/Journal management: all transactions and payment related documents for all shipments must be timely filed and managed. Managing activities related to trading between different regions and/or countries. Logistics coordination for smooth operation matching up purchases with sales Communication with customers and follow up on request accordingly Purchase/Sales data input to ERP(SAP) system Credit management for customer Perform all other functions requested that are within the scope of this job as deemed necessary or appropriate by manager. Other duties as assigned Candidate Specification Minimum Education: Bachelor (preferred) Language Requirements: English & Korean (conversational) Qualified candidates must have: 2~5 years of experience in Shipping Documentation (Chemical preferred) High level of accuracy, attention to detail and ability to prioritize multiple tasks in a fast-paced environment Ability to interact and communicate clearly and professionally with coworkers and customers Good organization skills Hiring Status

Build Your Career. Build America's Future Vulcan Materials Company is the nation's largest producer of construction aggregates and a major producer of aggregates-based construction materials including asphalt and ready-mixed concrete. When you join Vulcan, it's more than starting an exciting career - you get to make a difference for millions of people every day across the country. When you join Vulcan, you join a dynamic culture in which career development is encouraged, excellence is rewarded and diversity is valued. No matter the role or the location across the country, every member of the Vulcan team lives through the Vulcan Way: doing the right thing, the right way, at the right time. We're Coming Back Together To Be Together 100% In Office & Onsite At Vulcan Materials, we believe that the heart of our success lies in the strength of our engagement, our connection, and our commitment to developing our people. We are excited to restore the collaborative in-person environment that fuels our innovation and growth. This move is not just about being physically present; it's about reigniting the spirit that comes from face-to-face interactions, fostering a collaborative, inclusive culture where every voice is heard and everyone thrives. What You'll Do: Champion Safety. Take an active role in prioritizing safety throughout the operation for yourself and others at all times in accordance with MSHA and Vulcan standards. Follow established traffic patterns, avoiding hazardous conditions and immediately reporting unsafe ones. Operate Mobile Equipment Loaders. Operate mobile equipment loaders to load aggregates for processing, feed the plant, and safely load customers' trucks with desired specification product within legal load limits. Operate a loader to strip and prep the mining site and push material closer to the feeder for processing. Monitor Materials. Maintain an adequate feed of materials and maintain stockpiles. Visually inspect materials for compliance with specifications. Perform Inspections and Maintenance. Perform thorough pre-trip and post-trip inspections and accurately complete daily mobile equipment reports. Observe the plant and report any necessary maintenance or adjustments that may be required. Clean yard and plant areas. Participate in maintenance, repair, and general plant housekeeping activities. Monitor Processes, Materials, or Surroundings. Monitor the plant and operations and report any necessary maintenance or adjustments that may be required to ensure safety. Skills You'll Need: Experience. 2 years experience operating loaders and dozers in a plant environment preferred. Functional and Safety Knowledge. Must have a solid knowledge and understanding of the equipment's capabilities and specifications of different finished materials. Must recognize various products by sight and understand proper plant operation. Must have a solid knowledge and understanding of OSHA and MSHA rules and regulations. Must have hazard recognition skills. Flexibility. Must be able to work overtime and extended hours depending on customer and company demands. Must be able to work outside in all types of weather conditions and tolerate being exposed to loud noises. Ready to Drive. Must have a valid driver's license with a clean driving record. Interpersonal Skills. Must have good communication skills and the ability to work in a team environment. Must respond to inquiries promptly and follow through to address issues. What You'll Like About Us: Great Company Culture. Our people share a competitive drive for excellence in an environment of trust, teamwork, open-mindedness, and communication. Safe. Industry leader in health and safety standards. We are committed to creating a safe work environment and protecting all employees and customers. Meaningful Work. What sets us apart is the work we do impacts daily lives - and every employee contributes. Our aggregates produced are used to build roads, schools, hospitals, airports, and housing throughout the United States. Health Benefits. Medical, Dental, Vision programs, plus much more. Rest and Relaxation. Paid vacation, personal floating days, and paid holidays. Prepare for the Future. 401(k) with company match and contribution. Training and Development. We see our development programs and helping our employees meet their goals as a key part of our business. Vulcan Materials Company is committed to employing a diverse workforce. You will receive consideration without regard to race, color, religion, sex, national origin, age, sexual orientation, gender identity, gender expression, veteran status, or disability. You also have the right to be free from discrimination for medical needs arising from pregnancy, childbirth, or related medical conditions.

Join Our Team: Equipment Operators Wanted - Houston, TX Primoris Heavy Civil is looking for experienced Equipment Operators to support our growing operations in the Houston, TX area. This is your opportunity to work on meaningful infrastructure projects with a company that values safety, skill, and teamwork. As an Equipment Operator, you'll be responsible for the safe and efficient operation of machinery such as plows/trenchers, backhoes, excavators, skid steers, bulldozers, and front-end loaders. Your expertise will help keep projects on schedule and deliver results that meet the highest standards. Bring your experience. Build your future. Apply today and grow with Primoris Heavy Civil! JOB DESCRIPTION Operators are responsible for the safe and efficient operation of heavy equipment-including plows/trenchers, backhoes, excavators, skid steers, bulldozers, and front-end loaders-to support construction and project-related activities. QUALIFICATION STANDARDS Operate heavy equipment-including plows/trenchers, backhoes, excavators, skid steers, bulldozers, and front-end loaders-safely and efficiently to support construction activities. Perform daily equipment inspections to ensure safe operation and report any issues or required repairs. Conduct basic maintenance on equipment such as greasing, lubrication, and fluid checks. Follow site-specific safety protocols and company procedures at all times. Collaborate with site supervisors and crew members to meet project goals and schedules. Read and interpret grade stakes and project specifications as needed for accurate operation. Adapt to various weather conditions and physically demanding work environments. Work independently while maintaining a team-oriented, safety-focused mindset. Perform other duties as assigned, including labor tasks when equipment is not in use. PHYSICAL AND SAFETY REQUIREMENTS Must comply with company drug and alcohol policy and pass any required physical exams. Able to lift and carry up to 50 lbs (assistance recommended for heavier loads). Work extended hours on foot, including on uneven or rough surfaces. Climb ladders, kneel, crawl, or work at heights and in confined spaces. Must be able to hear and distinguish emergency signals and instructions while on duty WORK ENVIROMENT Location: industrial construction sites and/or fabrication shop Mobility Barriers to Access Job Site: Uneven ground level Obstructed pathways Work performed at low and/or high elevations Work performed in confined areas Climatic/Environmental Conditions at Job Site: Predominately outdoor climate May be exposed to extreme hot or cold weather Excessive humidity, rain, etc. Various noise levels caused by tools, machinery, equipment, etc. Potential exposure to chemical substances BENEFITS Competitive compensation paid weekly Best-in-class; Medical, Dental, Vision, and LTD/STD 401(k) with company match, vested day-one Employee Stock Purchase Plan [ESPP] Tuition Reimbursement Pet Coverage "For our Furry Friends" Legal Assistance Coverage Award winning safety programs COMPANY OVERVIEW Primoris was formed in 2004 as the parent company and is traded on the NYSE under the symbol PRIM. We provide a wide range of construction, maintenance, and engineering services for power generation, oil and gas, chemical, pipeline, utilities and distribution, and civil infrastructure clients. Primoris is ranked in the top 1% of the prestigious Top 600 Specialty Contractors List by Engineering News-Record (ENR), having built projects throughout the U.S. and Canada. For additional information, please visit ************* Primoris Heavy Civil, supported by the bonding capacity and resources of Primoris, has expanded into an even larger role within the heavy civil, infrastructure rehabilitation and transportation industries. Heavy Civil provides highway, port, airfield, rail and marine (intermodal transportation) construction services to private commercial and industrial clients as well as governmental entities such as the Department of Transportation and the US Army Corps of Engineers. Heavy Civil is comprised of six operating units that include North Louisiana Operations, South Louisiana Operations, Texas Operations, HMA Paving Operations, Concrete Paving Operations, and the Infrastructure Rehabilitation Unit. AGENCY STATEMENT We are not accepting resumes from Third Party Recruiting Firms for this position. If you are an Agency or Search firm representative, contact the Primoris Talent Acquisition Manager directly for consideration. Primoris or its subsidiaries will not be responsible for any fees arising from the use of resumes and online response forms through this source. In addition, Primoris or its subsidiaries will not be responsible for any fees on unsolicited resumes that are submitted to any member of the Staffing or Operations team. Primoris has established an approved vendor program for this service and will only consider accepting submissions from those approved firms. For consideration in becoming an approved vendor, contact HR. #LI-IG1

The Shipping Operator I prepares pipe for shipment and makes final repairs prior to shipment. Follows all safety policies and initiates safety improvements. Consults with team leader or shipping list to determine which pipe is required for shipping preparation. Reads, understands, and interprets specifications for pipe finishing and for bracing pipe in preparation for shipping. Operates industrial powered equipment to move material and pipe to required locations. Provides service to all areas associated with the movement of pipe and pipe related components. Moves support devices as needed in storage yard to safely support pipe at required location. Collects pipe from various work areas, delivers to storage location, or moves pipe from storage location to work area as required. Loads outgoing trucks and railcars and ensures load is properly secured to ride safely and without damage. Inventories materials in yard or other storage areas, and supplies shipping with materials as needed including cycle count and auditing. Lubricates truck, recharges batteries, fills fuel tank, or performs other light maintenance as required; contacts maintenance department or supervisor if other repairs or maintenance are needed. Performs pipe repairs according to procedure. Prepares bunks according to drawings. Mentors and trains lesser experienced equipment operators as directed by supervision. Maintains daily production log; submits log on daily basis. Assists drivers to position components/pipes properly. Completes daily inspections and submits. Measures wood pieces for stulling or bracing pipe; selects proper wood pieces, cuts and shapes as required for proper fit in pipe and install. Places bracings in completed pipe according to shipping specifications. Places end caps on pipe. Positions bunks on to trucks or rail cars. Bands individual pipes and pipe groupings to rail car. Performs other tasks as instructed by management. MINIMUM QUALIFICATIONS Must be physically able to perform the essential functions of the job, with or without reasonable accommodations. Must be able to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Must be able to read, write, and interpret simple documents and instructions, short correspondence, and memos. Must be able to effectively present information in one-on-one, small group situations to employees, and members of leadership. Must be able to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Must be able to compute ratio and percent and to interpret bar graphs. Must be able to read and interpret linear and circumference measurements using tape measures and calipers. Must be able to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Must be able to read, interpret, and carry out instructions furnished in written, oral, or diagram form. Must be able to deal with problems involving several concrete variables in standardized situations. Must be able to read, write and effectively communicate in English. Must have the willingness to rotate to different positions as requested by manager or team leader. PREFERRED QUALIFICATIONS Experience as forklift driver. ESSENTIAL PHYSICAL FUNCTIONS The employee is regularly required to stand, walk, use hands to finger, handle, or feel and talk or hear. The employee is occasionally required to sit. The employee is frequently required to stand; walk; reach with hands and arms and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 50 pounds, and occasionally lift and/or move up to 75 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.

Job Description USALCO La Porte is a major unit within the manufacturing network of a leading provider of aluminum-based component products used in water treatment, pulp and paper manufacturing, and other sectors. The right individual will have a can-do attitude, the ability to be part of a team while operating independently, and consistently performs to very high standards. JOB SUMMARY: The person in this role is responsible for packaging, labeling and loading manufactured products while assuring compliance is achieved in all company associated policies. The position requires a motivated, detail oriented, and results driven team player who: Incorporates safety and quality into every decision while performing day-to-day activities Effectively communicates with Supervisor and peers Shift work and weekend work may be required Can efficiently package and load manufactured products Can operate a fork truck to unload and load raw materials and finished products Will actively seek out opportunities for process improvement and take full responsibility for collaborating with management and peers to implement approved changes in a timely manner. The employee in this position will be a positive-natured, task-oriented individual with material handling experience and significant mechanical aptitude. The Material Handler is responsible for the safe and efficient loading of manufactured products. The person must possess excellent communication skills necessary to keep Supervisor and peers informed of scheduling and order completion. This person must be personally and professionally motivated to work constructively with team members at all levels within the company, to execute job responsibilities ROLES AND RESPONSIBITIES: Apply all plant safety rules, work guidelines / practices, and procedures Overseeing the safe and efficient operation of the plant equipment. Wearing and maintenance of personal protective equipment required for working with hazardous chemicals Developing and applying improvements in processes, equipment, and procedures Daily Responsibilities: Complete walk-through of the plant and equipment to audit safety/housekeeping Assist in loading/unloading trailers with products Unload raw materials as needed Complete blends as needed Follow all batch sheets Complete Certificates of Compliance for loaded trailers Complete all paperwork accurately including batch sheets, packaging counts and bills of lading Maintain and communicate information with the other shifts Provide support to Plant operations as needed Maintenance Complete MaintainX work requests for maintenance issues Inspect plant equipment daily and report any issues to Supervisor Must be able to work overtime, provide physical labor and work changing shifts as required to meet business requirements. Perform other duties as assigned in support of business goals and objectives. MINIMUM QUALIFICATIONS: KNOWLEDGE AND SKILLS Requires planning skills to prioritize daily packaging requirements Must be able to pay attention to detail Knowledge of general manufacturing equipment and forklift operation Must be dependable, flexible, and able to respond on short notice to satisfy requirements of customers. The ability to communicate with others clearly and succinctly, both verbally and in written form. Ability to utilize and perform minimal computer tasks Microsoft Office EDUCATION: A High School Diploma or GED EXPERIENCE: Chemical, Pharmaceutical or Food manufacturing environment, preferred ESSENTIAL FUNCTIONS: The Ability to: Must be able to obtain Forklift License through USALCO within 14 calendar days of being hired. Routinely lift 50 to 75 lbs. throughout the shift Routinely stand 60 to 70% of shift Routinely must traverse ship ladders, catwalks and close quarters USALCO is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected veteran status, age, or any other characteristic protected by law. As a general policy, USALCO does not offer employment visa sponsorships upon hire or in the future.

In this role, you will be responsible for machining and manufacturing of product for customers in a cost-efficient manner while demonstrating the ability to be proficient in setting up and operating manual machine shop equipment. Successful machinists are self-motivated and must be able to use a diversified range of calibrated equipment (calipers, micrometers, etc.) to measure characteristics of components and product to determine conformance to requirements prior to assembly. Additional skills required to be successful in this position are the ability to use and interpret manufacturing drawings, service manuals, and work instructions. RESPONSIBILITIES: Perform preventive maintenance on assigned equipment, keeping it clean and in optimal working condition, especially before extended downtime. Precision machining of pump parts, including rings, bushings, sleeves, and shafts Ability to handle .001 T.I.R. tolerances on finished products Ensure all manufactured work meets customer requirements; promptly report any nonconformances to the Quality Department before inspection. Use manufacturing IT systems (e.g., routers, forms) to document work activities accurately. Log time consistently on router operations using scanners and input stations to ensure accurate job costing. Complete daily production tasks as assigned by the supervisor. Follow all company safety policies and contribute to improving safety performance (e.g., Job Safety Analyses). Collaborate with supervisor to identify and implement process improvements that enhance departmental efficiency. Maintain a clean and organized work area, adhering to 6S principles. Stay informed about the Quality Management System and understand your role in supporting the company's Quality Policy. Complete and maintain all required documentation for work performed (e.g., Quality Plans, ITPs, routers, inspection reports). Available able to work overtime as necessary Perform other duties as assigned. Requirements SKILLS REQUIREMENTS: Demonstrated ability to use various types of inspection tools (micrometers, Vernier calipers, gauges, etc.). Ability to interpret manufacturing drawings, schematics, and Geometrical Dimensioning & Tolerancing (GD&T). General hand tool usage (must have tools). Be able to understand and comprehend quality system procedures, work instructions, and process mapping. Understand ISO 9001 standard requirements Understand API Q1 standard requirements. Demonstrate good communication skills, both verbal and written. Ability to read and write English. Ability to lift up to 50 lbs. EXPERIENCE REQUIREMENTS: 5 years of experience with manual mills A minimum of 5 years' experience as a General Machinist familiar with all types of general machine shop equipment, including, but not limited to: manual mills, grinders, etc., or equivalent formal education.

Have you ever thought about being part of a company that reimagines chemistry every day to build a better world? That's the purpose of Indorama Ventures, and we want you with us on this journey! We are looking for innovative, collaborative professionals who are ready to embrace the challenge of working in a company that is constantly expanding internationally. We value flexibility, partnership, and believe that the impact of our actions goes far beyond the chemical industry. Here, diversity matters. Our work environment is inclusive, diverse, and guided by respect, ethics, and equal opportunities for all. What we're looking for: Oversees plant operations to meet the operating plan. When needs exceed the capability of the shift, leads the efforts to acquire other resources to resolve the issue(s). What will be expected of you? 10% Performs necessary work in inspecting, loading, and unloading tank wagons, totes and rail cars. 5% Drive Yard Mule. 10% Performs necessary work in unloading, filling, and loading drums. 10% Maintains and records all inventory changes and performs necessary work for blending of products. 10% Maintains current, detailed knowledge and understanding of all shipping equipment, and chemicals that are loaded or unloaded, and contents of Shipping Procedure Manual. 10% Responsible for adherence to safety instructions applicable to work performed and for adherence to general safety instructions applicable to all plant employees and others. 10% Participate in Plant Emergency Response Team. 5% Make out reports, records data, and inputs information into appropriate systems. 5% Write Start Work and Hot Work Permits for maintenance and creates work orders. 10% Maintain good housekeeping habits to ensure the cleanliness, neatness, and order of work area and equipment. 10% Ensure efforts are in-line with all elements of Process Safety Management and the Huntsman Product Stewardship Initiatives. 5% Maintain good housekeeping habits to ensure the cleanliness, neatness, and order of work area and equipment. Follows instructions and performs other duties as may be assigned by supervisor. Assists other employees in accomplishment of Indorama company goals. Participates in and completes company-required training programs. Participates in Environmental, Health, & Safety initiatives as set forth by the company. What are we looking for in the Ideal candidate? A high school diploma or equivalent is required. Associate degree in Process Technology 5 years of chemical plant experience may be substituted in lieu of degree. Must have a level of proficiency with Internet, Email, and Microsoft programs. SAP experience preferred. What do we offer? A competitive compensation package, including: • Health insurance • WellHub / TotalPass • Life insurance • And other exclusive benefits The division you'll be joining is a global leader in the chemical industry. We offer a broad portfolio of solutions and high delivery standards to markets such as Crop Solutions, Home and Personal Care, Coatings, Energy & Resources, and Performance Products. Here, you can make a difference. Join us!

Location: Accuseal Houston, TXShift Days/Hours: 1st shift Monday - Friday 6:00 am - 2:30 pm. /OBJECTIVE: To Prep billets on a lathe for the CNC department. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the Essential functions. Set up a machine to Prep the billets on the face, and groove, turn down O.D and I.D. Control inventory. Inspect goods. Implement and practice Lean Manufacturing tools including 5S, to increase productivity, and eliminate waste. Assist in cross-training. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by the lead or supervisor. Other Requirements Must be able to learn basic computer skills. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to work in an environment with various temperatures. Required Education and Experience: High school diploma or equivalent. Must have 6 months to 1 year of work-related experience or be qualified by certification. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 50 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit, and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand.

Job Details Letco Group Cutten Road - Houston, TX Full Time $15.00 - $17.00 HourlyDescription We are a growing company based in Dallas, TX that offers its employees a company culture focused on customer service, continuous improvement, respect, safety, compliance, and honesty. The Company: With 34 locations across 4 major markets (Dallas, Houston, Nashville, Knoxville), Living Earth (LE) is one of the country's largest producers of sustainable landscaping products, including mulch, compost and soils. Its products are manufactured from recycled green waste materials - notably tree limbs, brush, leaves and grass clippings - and sold through a unique, closed-loop business model. Living Earth has built a strong, sustainable competitive advantage in the markets it serves through a network of convenient locations, unmatched delivery capabilities, and quality specialty products. By partnering with Living Earth, customers also benefit from lower total disposal costs and the satisfaction they are doing their part to improve the environment. Living Earth serves landscape contractors and municipalities, helping to ensure their products and services help beautify local communities and improve soil ecosystems. The company combines premium compost, mulches, bedding mixes, sand, dirt and other high-performance soil amendments with the experience and knowledge that ensure landscaping projects have the perfect materials for a successful outcome. LE works hand-in-hand with landscaping professionals and municipalities, making sure they receive fast, personal service coupled with product availability second to none. In addition to providing contractors with the products they need, a growing number of LE's products can be found at major retail stores including Lowe's and Houston Garden Centers. Founded more than 30 years ago in Houston, Texas, Living Earth is known for a diverse inventory and great customer service. The company currently has approximately 275 employees. For more information, visit ************************** . Description Operate heavy equipment in compliance with the company's operating safety policies and procedures Provide recommendations for maintaining and improving environmental performance Load mulch, soils, compost, sands and gravels into dump trucks and customer vehicles Ensure company equipment and material is maintained, kept cleaned, and stored in a safe manner Check filters and grease equipment Keep work area and equipment clean by collecting and disposing of scrap, excess materials, and refuse Proactively communicate with Site Manager and coworkers Complete required paperwork, reporting, and other documentation as required Benefits Wage rate commensurate with experience. Living Earth offers a competitive array of benefits including vacation and holiday time, medical, dental, 401K and a bonus plan. Living Earth is an Equal Opportunity Employer Qualifications Requirements Experience operating heavy equipment. Hand and Foot Coordination: You need to be able to coordinate movements of your hands and feet in order to guide very large machinery in tight places. Operation Monitoring: The ability to read gauges, dials, and other indicators, adjust them is necessary. Coordination: On busy construction sites, you must be able to coordinate your actions with those of other workers. Troubleshooting: It is essential that anyone operating heavy equipment is able to detect and fix operating problems. Critical Thinking: Your job will require you to identify the strengths and weaknesses of solutions to problems in order to choose the one that is most likely to be successful. Must have the ability and willingness to work in all types of adverse conditions such as extreme weather, enclosed spaces and heights up to 30 feet Able to pass a drug test Be able to recognize safety issues Willing to accommodate a schedule that can require weekend work Ability to work without close supervision once directed on task

The Equipment Operator will operate and maintain heavy, motorized equipment in a safe and efficient manner at a landfill. At GFL our goal is to invest in our people and provide opportunities to grow for life! Our employees are affectionately known as team green, a name that unites us all under our shared purpose of providing sustainable solutions to enable our customers and communities to be GREEN FOR LIFE! * 15 days of paid time off. * 4 medical plan options including an HSA with employer contribution & match program, dental, and vision coverage. * 401(k) with an employer match. * Paid holidays. * Employee Assistance Program with free counseling services. Overview: GFL Environmental is one of North America's leading waste management companies, proudly making communities cleaner, safer, and happier through first-class service. Working for GFL is more than a job - it's an opportunity to grow in your career, make new friends, and make a difference each day. Key Responsibilities: * Operate heavy, motorized equipment used in earth moving, trash processing, and composting operations, including but not limited to front-end wheel loaders, water tankers, dozers, scrapers, landfill trash compactors, mobile compost mixers, tub grinders, concrete crushers, bailers, excavator, ADT trucks, and other equipment to support a variety of operations. * Process incoming material with heavy equipment to build waste cells per designed landfill permitted plans. * Maintain the general working area in a leveled and organized manner. * Work closely with traffic control spotters to identify fill areas to be used for dumping solid waste. * Operate trash compactors to process trash in 2-foot lifts working on 3:1 or 4:1 slopes. * Operate dozer to cover and maintain level tipping areas for daily operations. * May operate water tanker and similar equipment for dust control, dirt compaction, and watering grass. * Build and maintain access and hauling roads. * Use handheld mobile radio units or company cell phone to coordinate tasks and resources. * Perform pre and post operations inspection and perform daily maintenance required of the equipment in accordance with Company policy and maintain accurate logs and records. * Identify potentially hazardous or unacceptable materials and report immediately to supervisor for proper handling of material. * Ensure adherence to safe work practices and procedures. * Perform other job-related duties as assigned by management. Requirements: * High school diploma or general education degree (GED) desired, but not required. * One (1) or more years of heavy equipment operation experience. * Must be able to meet criteria for safety sensitive functions according to Company standards. Knowledge, Skills, and Abilities: * Ability to follow instructions and perform duties under limited supervision. * Ability to operate any equipment necessary to perform job. * Ability to communicate effectively with internal and external customers. * Ability to understand and follow oral and written instructions. * Ability to read, write, and comprehend reports to accurately complete daily assignments. * Ability to work in accordance with Company safety policies & procedures, OSHA (Occupational and Safety Health Act) requirements, as well as all local, state, and federal laws. Physical/Mental Demands: * Must be able to stand, walk, bend, reach and lift in an outdoor environment 90% of the time. * Must be able to use hands and fingers, kneel, crawl, talk, hear, climb and balance. * Visual requirements include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. * Ability to manually lift/move up to 25 pounds regularly. * Ability to manually push/move up to 50 pounds with assistance from another employee. Working Conditions: * Outdoors in varying adverse weather; low/high temperatures, wet and/or high humidity or sudden temperature changes. * Exposure to outdoor elements, unpleasant odors, small space such as equipment cabs, exposure to fumes, dust, or uneven ground. #GFLTalent We thank you for your interest. Only those selected for an interview will be contacted. GFL is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic. If you are interested in applying for employment and need special assistance or an accommodation to apply for a posted position, please contact *******************************

Copart, Inc. a technology leader and the premier online vehicle auction platform globally, with over 200 facilities located across the world, Copart links vehicle sellers to more than 750,000 buyers in over 190 countries. We believe in providing an unmatched experience, every day and everywhere, driven by our people, processes, and technology. The Loader Operator will be responsible for moving and loading vehicles with a company-provided front-end loader or forklift. In addition, the Loader Operator will be required to maintain documentation of vehicle movement around the facility. Furthermore, the Loader Operator will be responsible for the daily pre and post-trip inspections and associated documentation of their assigned machine. In addition, the operator will maintain a safe work environment and be required to follow and be held accountable to company guidelines for safe loader operation. Finally, through a thorough understanding of Copart policy, the Loader Operator will facilitate the Copart experience by offering solutions to meet customer's needs. Ensures equipment is maintained according to company standards and customer contracts. Operates company equipment safely. Assists with the maintenance of company equipment and vehicles. Records vehicle information accurately and legibly. Operates digital camera or other basic vehicle documentation and tracking devices. Sets up yard for auctions within company timelines. Provides service to customers as needed. Maintains a positive and professional demeanor. Follows yard guidelines to maintain a safe working environment (i.e. speed limits, etc.).Must be able to load and unload vehicles as required. Must be able to pass training and safety requirements. Performs other duties as assigned. Required Skills & Experience: HS diploma or GED preferred. At least two years of work experience, preferably in an outdoor environment. One year of loader or forklift experience, certification preferred. Excellent customer service attitude and skills. Excellent communication skills, written and verbal. Positive attitude/High Integrity. Ability to operate heavy equipment. Must be able to multi-task in a fast-paced environment. Strong attention to detail. Occasional O.T. as needed. Bilingual skills a plus. Benefits Summary: · Medical/Dental/Vision · 401k plus a company match · ESPP - Employee Stock Purchase Plan · EAP - Employee Assistance Program (no cost to you) · Vacation & Sick pay · Paid Company Holidays · Life and AD&D Insurance · Discounts Along with many other employee benefits. At Copart, we are focused on harnessing the power of diversity, inclusion, and collaboration. By embracing diverse perspectives, we open doors to innovation and unleash the full potential of our team. We are dedicated to fostering a workplace where everyone feels appreciated, included, and inspired to grow and contribute meaningfully. E-Verify Program Participant: Copart participates in the Department of Homeland Security U.S. Citizenship and Immigration Services' E-Verify program (For U.S. applicants and employees only). Please click below to learn more about the E-Verify program: E-verify Participation Right to Work

Job DescriptionBenefits: Accident Insurance Hospital Indemnity Insurance Critical Illness Insurance Short Term Disability Insurance Long Term Disability Insurance Company Paid Life Insurance 401(k) 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Training & development Vision insurance Heavy Equipment Operator Make an Impact at C&D Scrap Metal Ready to take the wheel in a fast-paced, hands-on role where your skills and grit truly matter? Join a crew that keeps Houstons metal moving and brings pride to the recycling industry. At C&D Scrap Metal, we dont just run machines we run a tight, high-performing operation that values expertise, safety, and professionalism. If you're the kind of operator who knows how to get things DONE, this is your next move. What Youll Do Be the driving force behind our daily yard operations: Own the yard flow under Supervisor direction youre the one who keeps things running on time and on target. Load and unload materials with precision and confidence using loaders, excavators, crane material handlers, and forklifts. Support the metal processing crew sort, prep, and help us move materials to the finish line. Put safety first inspect equipment, gear up with PPE, and report anything that looks off. Keep your machinery humming perform basic maintenance and alert us to any issues fast. Be a standout with customers make every drop-off feel smooth, welcoming, and professional. Keep it clean help us keep the yard organized, safe, and efficient. Schedule & Locations Full-time role Occasional travel to satellite locations for operational support Who Were Looking For Youre not just an equipment operator youre a problem-solver, team player, and safety champion. At least 2 years operating heavy equipment (loaders, excavators, crane material handlers) Minimum 1 year in industrial or scrap yard environments Strong stamina, hand-eye coordination, and attention to detail Able to thrive independently and work without being micromanaged Committed to doing the job safely, smartly, and professionally Willing to work outdoors, no matter the weather Open to learning new tech and tools we evolve and so should you Why Join Us C&D Scrap Metal is a growing force in Houstons industrial landscape. We promote from within, reward hard work, and operate like a well-oiled machine with respect, integrity, and teamwork at the core. Here, your skills wont just be used theyll be valued and built upon. Ready to move metal and move your career forward? Apply now and lets build something great together.