Painter jobs in Brandon, MS - 130 jobs

The Department of Facilities and Construction Management at Jackson State University is seeking a skilled Painter IV to join their team. Their responsibilities will include surface preparation, paint application, color matching and using different techniques and tools, and maintaining a clean and safe work environment. Examples of Duties * Apply paint to surfaces including canvas, walls, floors, doors, and cabinets. * Serape, sandpaper, prime or seal surfaces prior to painting. * Erect scaffolding, movable, and immovable staging and various rigging to gain access to difficult areas; move furniture and equipment as needed. * Utilize spray guns for large jobs. * Work on ladders to reach high ceilings or walls. * Perform related duties as required. Typical Qualifications * Under direct supervision, the incumbent will be responsible for mixing, matching, and applying paint to various surfaces, completing touch-ups, and coordinating large palming projects. * Minimum High School Diploma or GED. * Must possess a valid Mississippi Driver's License. * Over 10 years of progressive experience as a painter. * Thorough knowledge of tools, application methods, and standard trade safety practices. * Complete knowledge of the proper handling, mixing, and disposal of toxic and potentially hazardous materials. * Must have the physical ability to climb ladders, scaffolding and work in sometimes physically strenuous places and positions.

The Painter applies paint, varnishes, and stains to interior and/or exterior surfaces. Prepares surfaces for painting by removing old paint using paint removers, scrapers, wire brushes, or blowtorches. Fills nail holes, cracks, and joints with caulk, putty, plaster, or other fillers using a caulking gun or a putty knife. Primes surfaces as necessary. May choose paint according to application or job. The position relies on guidelines and some experience and judgment to complete job and works under general supervision. * Preventative Maintenance & Repair * Applies and repairs plaster on walls. * Prepares surfaces to hang wall paper. * Must be able to hang wall paper. * Smooth surfaces using sandpaper, etc. * Paints all types of surfaces. * Varnishes, stains, enamels or lacquers surfaces. * Cut stencils for signs as needed. * Refinish furniture and fixtures. * Repairs plaster and sheetrock walls. * Able to prepare surfaces for water proofing. * Must be able to repair metal surface with bondo and prime for painting. * Installs and repairs ceramic floor tile. * Productivity * Calculates quantity of materials needed for a job, ensures that supplies are available at all times. * Responds to changes in work schedules as necessary; uses allotted time to departmental advantage. * Other duties as assigned * Consistently performs 12 organizational Service Standards focused on Values, Service and Quality. * 3 years of experience in the field or in a related area * High School Diploma or Equivalent

About Us Nova Space Solutions, LLC (NSS) is a joint venture between Wolf Creek Federal Services, Inc. (a wholly-owned subsidiary of Chugach Government Solutions, LLC) and Amentum Technology, Inc. When you join NSS, you also become a part of a proud legacy of supporting missions while sustaining culture. The federal division of Chugach Alaska Corporation, Chugach Government Solutions, through its subsidiaries and affiliates, has been supporting critical missions as a government contractor for over 25 years. We are proud to have built, and continue to foster, an incredibly talented team spanning across the globe in hundreds of different fields - each team member proud to serve our country with first-class business services, while also making a difference for our Chugach shareholders. Empowering employees is a part of our core, and that focus is one of the ways we build and foster high-performing teams. We empower our employees through competitive compensation and benefits package, professional growth opportunities, truthful communication, and more! If you are looking for an opportunity to serve something bigger than yourself; if you want your day job to be one that creates meaningful value; if you are looking for an environment that highly values employees and respects individual differences - then Nova Space Solutions may be the right fit for you! Job Overview The Painter performs all phases of painting. This is position is located in Stennis Space Center. Work Model: Onsite Responsibilities Essential Duties & Job Functions: * Paint walls, equipment, buildings, bridges, and other structural surfaces, using brushes, rollers, and spray guns. * May remove old paint to prepare surface prior to painting. * May mix colors or oils to obtain desired color or consistency. * All other duties as assigned. Job Requirements Mandatory: * High school graduate or GED equivalent. * Must have a strong background in all Phases of painting. * Must pass Asbestos physical and be able to wear a respirator as needed. * Tape & float, sand, texture. * Use of joint compounds, quick set. * Painting with brushes (cut-in) and rollers. * Layout & placing of floor tile, cove base. * Knowledge of latex, oil base & epoxy paints. * Stain & lacquers doors and cabinets. * Mix & match colors and textures * Work off scaffolds and ladders at various elevations. * Use airless spraying. * Paint booth experience helpful. Other Requirements: * Must be a U.S. Citizen in order to obtain required NASA badge. * Must be able to provide a certified Birth Certificate (with state seal), Passport, or INS Citizenship documents on date of hire (candidate will be sent home if this paperwork is not provided upon arrival on date of hire). * Must have the ability to communicate the English language, both verbally and written, in an effective manner. * Must have, and maintain, a valid Real ID driver's license. * Must be able to pass a Pre-Employment background check and drug screen test. Preferred: * Prior knowledge of NASA site, experienced with working on government installations. Special Knowledge and Skills Required: * Good organizational and planning skills. * Good Communication skills. * Ability to pay close attention to detail. * Ability to take direction. * Ability to operate and service various rotating equipment. * Ability to work with computers. * Ability to work independently but follow specific detailed instructions. * Ability to interface with various levels of personnel in a multi-cultural, team- oriented environment. Physical Requirements: * Lift minimum of 30-pound load up from the ground frequently. * Walk six hours per day. * Bend and stoop six hours per day. * Work overhead with minimum 20-pound load. * Push and pull frequently throughout the day. * Walk up/down stairs frequently. * Stand seven hours per day. * Climb ladders and scaffolding. * Wear PPE gear six hours continuously (steel toe shoes, safety glasses, hard hat, gloves). * Tolerate extreme cold/heat for three hours continuously. Reasonable Accommodation: CGS will provide reasonable accommodations, according to applicable state and federal laws, to all qualified individuals with physical or mental disabilities. In compliance with the ADA Amendments Act (ADAAA), if you have a disability and would like to request an accommodation in order to apply for a position with Chugach Government Solutions or any of its subsidiaries, please email ******************. Equal Employment Opportunity: Chugach is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, gender, sexual orientation, gender identity or expression, age, pregnancy, disability, genetic factors, protected veteran status or other characteristics protected by law.

The Painter applies paint, varnishes, and stains to interior and/or exterior surfaces. Prepares surfaces for painting by removing old paint using paint removers, scrapers, wire brushes, or blowtorches. Fills nail holes, cracks, and joints with caulk, putty, plaster, or other fillers using a caulking gun or a putty knife. Primes surfaces as necessary. May choose paint according to application or job. The position relies on guidelines and some experience and judgment to complete job and works under general supervision. Responsibilities * Preventative Maintenance & Repair * Applies and repairs plaster on walls. * Prepares surfaces to hang wall paper. * Must be able to hang wall paper. * Smooth surfaces using sandpaper, etc. * Paints all types of surfaces. * Varnishes, stains, enamels or lacquers surfaces. * Cut stencils for signs as needed. * Refinish furniture and fixtures. * Repairs plaster and sheetrock walls. * Able to prepare surfaces for water proofing. * Must be able to repair metal surface with bondo and prime for painting. * Installs and repairs ceramic floor tile. * Productivity * Calculates quantity of materials needed for a job, ensures that supplies are available at all times. * Responds to changes in work schedules as necessary; uses allotted time to departmental advantage. * Other duties as assigned * Consistently performs 12 organizational Service Standards focused on Values, Service and Quality. Qualifications * 3 years of experience in the field or in a related area * High School Diploma or Equivalent

Acuren Inspection is now hiring hard working, dependable Painter to work on a project basis to start as soon as possible. The Technician is responsible for carrying out duties and responsibilities in a safe and timely manner as assigned by the Supervisor. Responsibilities KEY TASKS & GENERAL RESPONSIBILITIES: Have a comprehensive knowledge Painting/Blasting Assist other technicians as required Perform specific job functions as they relate to work orders Ensure operational safety of all equipment Other work duties as assigned. Requirements KNOWLEDGE, SKILLS & ABILITIES: Knowledge of coating materials, application techniques, and curing processes Experience with paint and industrial equipment Experience using a wet paint gun, hand and power tools, and other painting equipment The ability to read and interpret blueprints, sketches, and drawings The ability to read and use coating thickness gages, surface profile gages, dew point meters, soluble salt testers, and hardness or ultrasonic thickness gages EDUCATION: Previous pipeline experience preferred NCCER Painter certification a plus NACE certification a plus Benefits Competitive salary Medical, dental, vision, and supplemental insurance 401K Plan Paid Holidays Paid Time Off Working Conditions WORKING CONDITIONS: Outside environment with continuous physical effort, exposure to 5-7 elements/conditions, moderate mental effort, and occasional requests for assistance. Willingness to travel and cover projects as needed PHYSICAL JOB REQUIREMENTS & DEMANDS: Standing and walking for extended periods of time Ability to climb and work from ladders Company Overview Acuren is a trusted, single source provider of technology-enabled asset protection solutions used to evaluate the structural integrity of critical energy, industrial and public infrastructures. Committed to delivering a Higher Level of Reliability, Acuren provides an unrivaled spectrum of capabilities including inspection, traditional and advanced NDE/NDT, failure analysis, rope access, materials engineering, field engineering, reliability engineering, drones, robotics, V-Deck and condition based monitoring services. Our work is critical to the integrity and safety of industrial firms, including petroleum refinery, pipeline, power generation, pulp & paper, mining, pharmaceutical, aerospace and automotive industries. Acuren employs over 4,000 dedicated professionals supporting the mechanical integrity and inspection programs of the world's largest industrial segments. Acuren is a market leader. Our formula for success is straightforward: be capable locally, with certified and well-equipped personnel supported by trained, experienced leaders. Continuing to build on a strong heritage of safety, quality and professionalism, Acuren strives to maintain incident free work environments, pursues advanced technical developments, and supports reliability programs that are valued by clients and employees. #LI-MC1

The Painter I is responsible for basic surface preparation and spray painting of scale assemblies and parts. This position will be required to operate paint systems, maintain tools and equipment, and ensure compliance with safety and environmental regulations. Additionally, this position will support housekeeping and 5S initiatives. Essential Job Duties Inspects surfaces prior to painting to ensure proper preparation. Mixes paints according to technical procedures and established standards. Operates GRACO air-assisted airless spray system under supervision. Applies paint to large metal structures using electrostatic or spray guns. Inspects painted work for coverage quality and absence of defects or foreign material. Maintains painting equipment and tools per scheduled maintenance requirements. Performs housekeeping and 5S duties in the paint booth and surrounding work areas. Documents material usage and equipment maintenance logs accurately. Assists with moving and positioning assemblies using overhead cranes. Additional duties as assigned. Required Qualifications - Required qualifications to effectively perform the job. An equivalent combination of education, training and experience will be considered. (Additional requirements may be designated by position.) High school diploma or equivalent. 1-2 years of industrial spray-painting experience preferred. Knowledge, Skills and Abilities - May be representative, but not all-inclusive, of those knowledge, skills and abilities commonly associated with this position. Ability to identify surface defects and apply correct painting techniques. Ability to understand paint mixing, safety practices, and respirator usage. Ability to understand, remember, and follow both written and verbal instructions. Ability to learn new tasks, processes and procedures quickly and from experience. Willingness to be trained on GRACO systems. Willingness to learn EPA and environmental standards. Willingness to learn about industrial coatings and proper application procedures. Strong attention to detail and ability to work under general supervision. Ability to learn and follow all respirator protocols and other safety protocols. Effective communication skills with a team-oriented, safety-first mindset. Work Environment - Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. General Manufacturing environment including regular exposure to high noise levels, outdoor climate and weather fluctuations including temperature, humidity, rain, etc., dust, uneven ground, exposure to hazardous equipment, and contaminants. Standard schedule with frequent overtime hours and weekend work may be required. Physical Abilities - Activities that are commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Regularly required to talk and hear audible signals and warnings from machines, equipment, and plant warning systems. Required to use near and far vision to perceive paint imperfections or surface irregularities, ability to focus and visually determine shapes and colors inspect materials or products for color variation, read small print, gauges and displays to operate machinery. Frequently required to use manual dexterity to operate controls, levers, buttons on machinery, tools, machinery, adjust instrumentation and ability to move wrist, hand and/or finger movement repetitively to work on machine controls and type. Must be able to bend knee and waist, kneel, crouch, reach overhead, climb stairs and ladders, sit, and stand or walk for prolonged periods of time (up to 10 hours per shift) Required to frequently move or lift loads or materials up to 50 pounds using proper lifting techniques and exert force to push and pull objects and equipment throughout shift. Ability to wear for entire work shift required personal protective equipment including coveralls, gloves, eye protection, respirators, steel toe safety boots with metatarsal guards, safety glasses with side shields, and hearing protection. Requires the ability to pass pulmonary capacity testing for respirators. Regular attendance is a necessary and essential function. Fairbanks Scales Inc. is an Equal Opportunity Employer including Disability/Vets DISCLOSURE REGARDING BACKGROUND INVESTIGATION Fairbanks Scales Inc. may obtain information about you from a third-party consumer reporting agency for employment purposes. Thus, you may be the subject of a "consumer report" and/or "investigative consumer report" which may include information about your character, general reputation, personal characteristics, and/or mode of living, and which can involve personal interviews with sources such as neighbors, friends, or associates, The reports may contain information regarding your credit history, criminal history, social security verification, motor vehicle records ("driving records"), verification of your education or employment history, or other background checks. Credit history will only be requested where such information is substantially related to the duties and responsibilities of the position for which you are applying. NOTIFICATION OF PRE-EMPLOYMENT DRUG SCREENING Fairbanks Scales Inc. performs post-offer, pre-employment drug testing for all roles prior to being hired into any role as part of our Drug Free Workplace Policy. In addition, Fairbanks Scales Inc. performs post-offer, pre-employment drug testing under the authority of the U.S. Department of Transportation prior to being hired for any role or transferred into a safety-sensitive role.

McCoy Global THIS JOB IS FOR YOU IF YOU ACT LIKE AN OWNER AND OWN YOUR ACTIONS; IF YOU EMBRACE CHALLENGE AND LEAD CHANGE; IF YOU EVOLVE, ADAPT AND CELEBRATE SUCCESS; IF YOU APPROACH ALL INTERACTIONS POSITIVELY, COURAGEOUSLY AND HONESTLY; IF YOU HAVE YOUR TEAMS BACK; IF YOU ARE THE BEST AT EVERYTHING YOU DO! What We Need: Are you someone who has a strong mechanical aptitude good organization and time management skills? If your answer is YES , then that's where YOU come in, because we are looking for a talent like yours! As a Painter, you will prepare surfaces for painting and coating using sandblasting, chemical, and mechanical methods. You will apply protective finishes including paint, enamel, glaze, gelcoat, and lacquer to products and work areas using spray equipment. This role also involves assisting with the fabrication of tools when needed and performing various tasks throughout the shop to support daily operations. What you'll bring: High school diploma or general equivalency diploma (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. High school reading level. High school math ability. Ability to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Use of overhead crane, pallet jacks, and other material handling equipment Ability to lift 50 lbs. Basic computer literacy skills What you'll do: Clean grease and dirt from product. Prep surfaces with either sand blasting and/or other mechanical/chemical means. Maintain function of painting work cell equipment. Apply masking tape over parts and areas that are not to be coated. Select and mixes coating liquid to produce desired color. Pour coating liquid into spray container and connect gun to air hose. Turn sprayer valves and nozzle to regulate width and pressure of spray. Pull trigger and direct spray onto work surface to apply prime or finish coat. Coat areas inaccessible to hand sprayers with brush. Complete minor touch ups on equipment when needed. Visually inspect completed Paint & Blast assignments for work quality. Clean spraying equipment and brushes with solvent. Remove rust from metal, wire brush, or steel wool. Comply with organizations policies, internal controls and Code of Conduct. Conforming to paint specifications. Other duties may be assigned. Who Are We? Over a century ago, blacksmith Henry McCoy established the Edmonton Auto Spring Works in Edmonton, Alberta, Canada. Back in 1914, the name McCoy meant a commitment to quality; and that, along with a desire to continually innovate, is what we stand for today. KEEPING AHEAD OF THE CURVE Always ahead of the curve, we've evolved from auto springs, axle manufacturing, trucking, and trailers, to hydraulic power tongs, advanced engineering for wellbore integrity, data acquisition for harsh environments, and cloud-based automated Smart technology solutions. Our evolution has been relentless - just the way we love it. LEADING CHANGE All along the way, we have aggressively embraced change to support our customers at every turn, anticipating their needs and delivering highly customized solutions. It is no surprise that our company today bears little resemblance to the blacksmith shop of 1914. AN UNWAVERING FOCUS Yet it is also no surprise that our spirit remains fundamentally unchanged: our focus on quality and customization ensures the products and services we provide live up to our promises, so you can live up to yours. When you work at McCoy, you work with: A great teamwork environment that challenges your ability while having fun. A voice to help us continuously improve our processes and teams. A chance to help us deliver innovative solutions to our customers provide energy to the world. An opportunity to grow within our company as we succeed in growing our customers. An organization that recognizes and cares about its employee's well-being. So, what can McCoy offer you? We offer competitive time-off 4 wellness days PER YEAR plus your birthday off! 3 weeks of vacation accrued throughout the year We match your 401K Matching Employee Share Purchase Plan (ESPP) Work with a company that CARES We are 1-McCoy and We want YOU! Note: McCoy Global conducts security checks for positions.

_"This posting is part of our ongoing talent pipeline and is not tied to an active opening; qualified candidates will be contacted when the role officially becomes available."_ Paints aircraft interior, exterior, and piece parts. Prepares for painting by masking, stripping, and washing aircraft sections and components. Blends and mixes paints, inks, and coatings to proper spraying consistency. Performs detail and touch-ups. Sets up and coordinates processes for painting production parts. **Essential Functions** : The incumbent is responsible for cleaning, sanding, and painting of aircraft components. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. + Prepares and paints aircraft components + Removes paint using abrasive blasting equipment + Cleans and degreases parts using specified cleaning solutions + Sands component parts as needed to prepare for painting + Paints component parts using industrial painting tools, materials, and equipment + Routes components to the next stage in the overhaul cycle + Exhibits positive courteous behavior with coworkers + Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary + Follows all safety procedures and practices as established by the Company and regulatory bodies + This job has no supervisory responsibilities + Maintains the highest ethical personal and professional standards. + Other projects and initiatives as assigned. + Other projects and initiatives as assigned. **Qualifications** **& Requirements:** + Graduation from a standard four (4) year high school or equivalent (GED); AND 2 years of related work experience directly related to aircraft maintenance or component maintenance. + Painting experience in the automotive industry will be considered. + A & P Certification preferred + Knowledge of the following:Databases sufficient to perform the job, duties, and tasks associated with the position;Aircraft sheet metal repair and component repair;Instrument, electronic and electrical test equipment;Military or commercial aviation maintenance and its terminology; and U.S. government regulations for federal contractors and FAA maintenance programs + Must be able to pass a pre-employment and annual pulmonary function test (PFT) for the use of supplied air respirator. + Must be able to pass a background investigation to obtain a public trust position (if required for the position). + Must be able to obtain and maintain a DoD security clearance (if required for the position). + Must be able to work weekends, other shifts, and overtime as required. + The essential physical requirements of the position will be reviewed with the applicant during the interview. + Some travel will be required. + Must adhere to Company policies/procedures and management instructions. + Ability to maintain the confidentiality of sensitive information and Company Proprietary data. **Physical Demands and Work Environment** While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and taste or smell. The employee must occasionally lift and/ or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. **Performance Standards** Annual performance appraisal for administrative level; attainment of annual goals established between supervisor and incumbent. + **Benefits include the following:** + Healthcare coverage + Retirement plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources + Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. \#VETS Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.

“This posting is part of our ongoing talent pipeline and is not tied to an active opening; qualified candidates will be contacted when the role officially becomes available.” Paints aircraft interior, exterior, and piece parts. Prepares for painting by masking, stripping, and washing aircraft sections and components. Blends and mixes paints, inks, and coatings to proper spraying consistency. Performs detail and touch-ups. Sets up and coordinates processes for painting production parts. Essential Functions: The incumbent is responsible for cleaning, sanding, and painting of aircraft components. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal elements. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all-inclusive; they are examples only and may be amended or added to as needed by the organization. Prepares and paints aircraft components Removes paint using abrasive blasting equipment Cleans and degreases parts using specified cleaning solutions Sands component parts as needed to prepare for painting Paints component parts using industrial painting tools, materials, and equipment Routes components to the next stage in the overhaul cycle Exhibits positive courteous behavior with coworkers Assists coworkers and those in other departments to successfully perform job tasks and functions when necessary Follows all safety procedures and practices as established by the Company and regulatory bodies This job has no supervisory responsibilities Maintains the highest ethical personal and professional standards. Other projects and initiatives as assigned. Other projects and initiatives as assigned. Qualifications & Requirements: Graduation from a standard four (4) year high school or equivalent (GED); AND 2 years of related work experience directly related to aircraft maintenance or component maintenance. Painting experience in the automotive industry will be considered. A & P Certification preferred Knowledge of the following: Databases sufficient to perform the job, duties, and tasks associated with the position; Aircraft sheet metal repair and component repair; Instrument, electronic and electrical test equipment; Military or commercial aviation maintenance and its terminology; and U.S. government regulations for federal contractors and FAA maintenance programs Must be able to pass a pre-employment and annual pulmonary function test (PFT) for the use of supplied air respirator. Must be able to pass a background investigation to obtain a public trust position (if required for the position). Must be able to obtain and maintain a DoD security clearance (if required for the position). Must be able to work weekends, other shifts, and overtime as required. The essential physical requirements of the position will be reviewed with the applicant during the interview. Some travel will be required. Must adhere to Company policies/procedures and management instructions. Ability to maintain the confidentiality of sensitive information and Company Proprietary data. Physical Demands and Work Environment While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee frequently is required to sit. The employee is occasionally required to stand, walk, and taste or smell. The employee must occasionally lift and/ or move up to 50 pounds. Specific vision abilities required by this job include close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Performance Standards Annual performance appraisal for administrative level; attainment of annual goals established between supervisor and incumbent. Benefits include the following: Healthcare coverage Retirement plan Life insurance, AD&D, and disability benefits Wellness programs Paid time off, including holidays Learning and Development resources Employee assistance resources Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans. #VETS

Job Description Job Title: Baster/Painter Working Leaderman Position Overview: A Working Leaderman is responsible for directing his/her workforce in the successful implementation of craft-specific activities as it relates to associated shipbuilding and/or repair functions. Key Responsibilities: • Directs and coordinates related craft activities. • Develops, reviews, and maintains schedules, budgets and other essential records. • Can read and interpret construction drawings, specifications and other technical guidance documentation. • Ensures material and labor resources necessary to accomplish tasks are readily available. • Meets with other supervisors to coordinate craft efforts. • Optimizes efforts to produce a high-quality work product consistent with Company standards. • Trains and motivates workforce to result in high levels of productivity. • Responds to daily personnel, equipment and facility issues; develops viable solutions and remedial actions. • Provides specific task requirements, technical and hands-on guidance to subordinates. Qualifications: · Five (5) years shipbuilding/repair or three (3) years of continuous Company experience in a similar position preferred. Skills and Abilities: · Possesses in-depth knowledge of craft-specific processes and techniques. · Well-organized supervisor with directly applicable experience in resource planning and scheduling. · Works well with other craft supervisors. · Exhibits high energy levels and maintains a good attitude. · Can perform labor estimates and planning manning schedules. · Familiar with standard marine practice and general specifications for construction. · Has good basic knowledge of shipbuilding/repair activities Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity. Powered by ExactHire:187823

Applies paint, varnishes, and stains to exterior surfaces of metal products in a pipe fabrication coating facility. Must have Fusion Bonding Epoxy (FBE) experience. Responsibilities Primes surfaces as necessary. May choose paint according to application or job. Stir paint, pour paint into spray container, and applies primer or finish coat of paint, using spray gun. Disassembles paint and sandblasting equipment and cleans equipment. Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. Performs other duties and activities as required. Relies on instructions and pre-established guidelines to perform the functions of the job. Works under minimum supervision. Typically reports to a supervisor. Has knowledge of commonly used concepts, practices, and procedures within a particular field. Physical Requirements NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing O Balancing O Bending F Stooping F Kneeling F Crouching F Crawling F Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs) Carrying (lbs) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 O 25-50 O Education May require a high school diploma or its equivalent. May require previous years of experience in the field or in a related area. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Description Job Duties & Responsibilities: will perform a variety of duties including, but not limited to the following: Prepping, priming, sanding, and refinishing company and/ or leased trucks Operate all equipment in collision center in a safe manner Document all work performed when job is completed Keep all work areas clean Qualifications, Experience & Physical Requirements: A high school diploma or equivalent Auto refinishing experience preferred Must be able to work well with others Take direction as needed Must have tools/ toolbox Knowledge of current manufacturers repair standards and experience required Must comply with all OSHA safety rules and regulations Benefits We Offer: At KLLM, we value our employees and are proud to offer a comprehensive benefits package, including: Medical, Dental, and Vision Insurance - two medical plan options to fit your needs Company-Paid Life Insurance $25,000 - additional voluntary life and AD&D coverage available Disability Coverage 401(k) Retirement Plan Paid Time Off (PTO) and paid holidays Employment is contingent upon passing a background check and drug screen. KLLM is an Equal Opportunity Employer. We are committed to creating an inclusive and respectful workplace across the company in all departments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected characteristic. We participate in E-Verify to confirm employment eligibility in the United States. #zr

The Department of Facilities and Construction Management at Jackson State University is seeking a skilled Painter II to join their team. The Painter II will be responsible for surface preparation, paint application, color matching and using different techniques and tools, and maintaining a clean and safe work environment. Examples of Duties * Apply paint to surfaces including canvas, walls, floors, doors, and cabinets. * Scrape, sandpaper, prime or seal surfaces prior to painting. * Erect scaffolding, movable, and immovable staging and various rigging to gain access to difficult areas; move furniture and equipment as needed. * Utilize spray guns for large jobs. * Work on ladders to reach high ceilings or walls. * Perform related duties as required. Typical Qualifications * Under direct supervision, the incumbent will be responsible for mixing, matching, and applying paint to various surfaces. * Completing touch-ups, and coordinating large painting projects. * Minimum High School Diploma or GED. * Must possess a valid Mississippi Driver's License. * Five to 10 years of progressive experience as a painter. * Thorough knowledge of tools, application methods, and standard trade safety practices. * Complete knowledge of the proper handling, mixing, and disposal of toxic and potentially hazardous materials. * Must have the physical ability to climb ladders, scaffolding and work in sometimes physically strenuous places and positions.

SUMMARY To demonstrate knowledge and skills when applying protective coatings to surfaces. RESPONSIBILITIES - Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines. - Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be covered, removing old paint and wall coverings, cracks and holes are filled and smoothed over. - Must know what materials were used to make the paint and which types of paints are required for different materials, such as plaster, wood, brick, and metal. - Must have a good eye for color to mix and match paints. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS A high school diploma or equivalent, minimum eighteen years old, and be able to work well with their hands. Ability to judge colors is important. Working knowledge of different application techniques, proper care of tools and safe use and handling of paint, solvents, and adhesives. Must be physically able to work for long periods of time with arms raised overhead.

Job Description The Painter I is responsible for basic surface preparation and spray painting of scale assemblies and parts. This position will be required to operate paint systems, maintain tools and equipment, and ensure compliance with safety and environmental regulations. Additionally, this position will support housekeeping and 5S initiatives. Essential Job Duties Inspects surfaces prior to painting to ensure proper preparation. Mixes paints according to technical procedures and established standards. Operates GRACO air-assisted airless spray system under supervision. Applies paint to large metal structures using electrostatic or spray guns. Inspects painted work for coverage quality and absence of defects or foreign material. Maintains painting equipment and tools per scheduled maintenance requirements. Performs housekeeping and 5S duties in the paint booth and surrounding work areas. Documents material usage and equipment maintenance logs accurately. Assists with moving and positioning assemblies using overhead cranes. Additional duties as assigned. Required Qualifications - Required qualifications to effectively perform the job. An equivalent combination of education, training and experience will be considered. (Additional requirements may be designated by position.) High school diploma or equivalent. 1-2 years of industrial spray-painting experience preferred. Knowledge, Skills and Abilities - May be representative, but not all-inclusive, of those knowledge, skills and abilities commonly associated with this position. Ability to identify surface defects and apply correct painting techniques. Ability to understand paint mixing, safety practices, and respirator usage. Ability to understand, remember, and follow both written and verbal instructions. Ability to learn new tasks, processes and procedures quickly and from experience. Willingness to be trained on GRACO systems. Willingness to learn EPA and environmental standards. Willingness to learn about industrial coatings and proper application procedures. Strong attention to detail and ability to work under general supervision. Ability to learn and follow all respirator protocols and other safety protocols. Effective communication skills with a team-oriented, safety-first mindset. Work Environment - Environmental or atmospheric conditions commonly associated with the performance of the functions of this job. General Manufacturing environment including regular exposure to high noise levels, outdoor climate and weather fluctuations including temperature, humidity, rain, etc., dust, uneven ground, exposure to hazardous equipment, and contaminants. Standard schedule with frequent overtime hours and weekend work may be required. Physical Abilities - Activities that are commonly associated with the performance of the functions of this job. The physical demands described below are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Regularly required to talk and hear audible signals and warnings from machines, equipment, and plant warning systems. Required to use near and far vision to perceive paint imperfections or surface irregularities, ability to focus and visually determine shapes and colors inspect materials or products for color variation, read small print, gauges and displays to operate machinery. Frequently required to use manual dexterity to operate controls, levers, buttons on machinery, tools, machinery, adjust instrumentation and ability to move wrist, hand and/or finger movement repetitively to work on machine controls and type. Must be able to bend knee and waist, kneel, crouch, reach overhead, climb stairs and ladders, sit, and stand or walk for prolonged periods of time (up to 10 hours per shift) Required to frequently move or lift loads or materials up to 50 pounds using proper lifting techniques and exert force to push and pull objects and equipment throughout shift. Ability to wear for entire work shift required personal protective equipment including coveralls, gloves, eye protection, respirators, steel toe safety boots with metatarsal guards, safety glasses with side shields, and hearing protection. Requires the ability to pass pulmonary capacity testing for respirators. Regular attendance is a necessary and essential function. Fairbanks Scales Inc. is an Equal Opportunity Employer including Disability/Vets DISCLOSURE REGARDING BACKGROUND INVESTIGATION Fairbanks Scales Inc. may obtain information about you from a third-party consumer reporting agency for employment purposes. Thus, you may be the subject of a "consumer report" and/or "investigative consumer report" which may include information about your character, general reputation, personal characteristics, and/or mode of living, and which can involve personal interviews with sources such as neighbors, friends, or associates, The reports may contain information regarding your credit history, criminal history, social security verification, motor vehicle records ("driving records"), verification of your education or employment history, or other background checks. Credit history will only be requested where such information is substantially related to the duties and responsibilities of the position for which you are applying. NOTIFICATION OF PRE-EMPLOYMENT DRUG SCREENING Fairbanks Scales Inc. performs post-offer, pre-employment drug testing for all roles prior to being hired into any role as part of our Drug Free Workplace Policy. In addition, Fairbanks Scales Inc. performs post-offer, pre-employment drug testing under the authority of the U.S. Department of Transportation prior to being hired for any role or transferred into a safety-sensitive role. Job Posted by ApplicantPro

McCoy Global THIS JOB IS FOR YOU IF YOU ACT LIKE AN OWNER AND OWN YOUR ACTIONS; IF YOU EMBRACE CHALLENGE AND LEAD CHANGE; IF YOU EVOLVE, ADAPT AND CELEBRATE SUCCESS; IF YOU APPROACH ALL INTERACTIONS POSITIVELY, COURAGEOUSLY AND HONESTLY; IF YOU HAVE YOUR TEAMS BACK; IF YOU ARE THE BEST AT EVERYTHING YOU DO! What We Need: Are you someone who has a strong mechanical aptitude good organization and time management skills? If your answer is YES, then that's where YOU come in, because we are looking for a talent like yours! As a Painter, you will prepare surfaces for painting and coating using sandblasting, chemical, and mechanical methods. You will apply protective finishes including paint, enamel, glaze, gelcoat, and lacquer to products and work areas using spray equipment. This role also involves assisting with the fabrication of tools when needed and performing various tasks throughout the shop to support daily operations. What you'll bring: * High school diploma or general equivalency diploma (GED); or one to three months related experience and/or training; or equivalent combination of education and experience. * High school reading level. * High school math ability. * Ability to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. * Use of overhead crane, pallet jacks, and other material handling equipment * Ability to lift 50 lbs. * Basic computer literacy skills What you'll do: * Clean grease and dirt from product. * Prep surfaces with either sand blasting and/or other mechanical/chemical means. * Maintain function of painting work cell equipment. * Apply masking tape over parts and areas that are not to be coated. * Select and mixes coating liquid to produce desired color. * Pour coating liquid into spray container and connect gun to air hose. * Turn sprayer valves and nozzle to regulate width and pressure of spray. * Pull trigger and direct spray onto work surface to apply prime or finish coat. * Coat areas inaccessible to hand sprayers with brush. * Complete minor touch ups on equipment when needed. * Visually inspect completed Paint & Blast assignments for work quality. * Clean spraying equipment and brushes with solvent. * Remove rust from metal, wire brush, or steel wool. * Comply with organizations policies, internal controls and Code of Conduct. * Conforming to paint specifications. * Other duties may be assigned. Who Are We? Over a century ago, blacksmith Henry McCoy established the Edmonton Auto Spring Works in Edmonton, Alberta, Canada. Back in 1914, the name McCoy meant a commitment to quality; and that, along with a desire to continually innovate, is what we stand for today. KEEPING AHEAD OF THE CURVE Always ahead of the curve, we've evolved from auto springs, axle manufacturing, trucking, and trailers, to hydraulic power tongs, advanced engineering for wellbore integrity, data acquisition for harsh environments, and cloud-based automated Smart technology solutions. Our evolution has been relentless - just the way we love it. LEADING CHANGE All along the way, we have aggressively embraced change to support our customers at every turn, anticipating their needs and delivering highly customized solutions. It is no surprise that our company today bears little resemblance to the blacksmith shop of 1914. AN UNWAVERING FOCUS Yet it is also no surprise that our spirit remains fundamentally unchanged: our focus on quality and customization ensures the products and services we provide live up to our promises, so you can live up to yours. When you work at McCoy, you work with: * A great teamwork environment that challenges your ability while having fun. * A voice to help us continuously improve our processes and teams. * A chance to help us deliver innovative solutions to our customers provide energy to the world. * An opportunity to grow within our company as we succeed in growing our customers. * An organization that recognizes and cares about its employee's well-being. So, what can McCoy offer you? * We offer competitive time-off * 4 wellness days PER YEAR plus your birthday off! * 3 weeks of vacation accrued throughout the year * We match your 401K * Matching Employee Share Purchase Plan (ESPP) * Work with a company that CARES We are 1-McCoy and We want YOU! Note: McCoy Global conducts security checks for positions.

Job Title: Baster/Painter Working Leaderman Position Overview: A Working Leaderman is responsible for directing his/her workforce in the successful implementation of craft-specific activities as it relates to associated shipbuilding and/or repair functions. Key Responsibilities: • Directs and coordinates related craft activities. • Develops, reviews, and maintains schedules, budgets and other essential records. • Can read and interpret construction drawings, specifications and other technical guidance documentation. • Ensures material and labor resources necessary to accomplish tasks are readily available. • Meets with other supervisors to coordinate craft efforts. • Optimizes efforts to produce a high-quality work product consistent with Company standards. • Trains and motivates workforce to result in high levels of productivity. • Responds to daily personnel, equipment and facility issues; develops viable solutions and remedial actions. • Provides specific task requirements, technical and hands-on guidance to subordinates. Qualifications: · Five (5) years shipbuilding/repair or three (3) years of continuous Company experience in a similar position preferred. Skills and Abilities: · Possesses in-depth knowledge of craft-specific processes and techniques. · Well-organized supervisor with directly applicable experience in resource planning and scheduling. · Works well with other craft supervisors. · Exhibits high energy levels and maintains a good attitude. · Can perform labor estimates and planning manning schedules. · Familiar with standard marine practice and general specifications for construction. · Has good basic knowledge of shipbuilding/repair activities Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

Applies paint, varnishes, and stains to exterior surfaces of metal products in a pipe fabrication coating facility. Must have Fusion Bonding Epoxy (FBE) experience. Responsibilities * Primes surfaces as necessary. * May choose paint according to application or job. Stir paint, pour paint into spray container, and applies primer or finish coat of paint, using spray gun. * Disassembles paint and sandblasting equipment and cleans equipment. * Responsible for observing and complying with all safety and project rules, including wearing required personal safety equipment. * Performs other duties and activities as required. * Relies on instructions and pre-established guidelines to perform the functions of the job. * Works under minimum supervision. * Typically reports to a supervisor. * Has knowledge of commonly used concepts, practices, and procedures within a particular field. Physical Requirements NP=Not Present, O=Occasionally (0-33%), F=Frequently (34-66%), C=Constantly (67-100%) Standing C Walking C Sitting F Pushing F Pulling F Climbing O Balancing O Bending F Stooping F Kneeling F Crouching F Crawling F Reaching C Handling C Fingering C Feeling C Vision C Hearing C Lifting (lbs) Carrying (lbs) 0-10 C 0-10 C 10-25 F 10-25 F 25-50 O 25-50 O Education * May require a high school diploma or its equivalent. * May require previous years of experience in the field or in a related area. We are an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law.

Job Duties & Responsibilities: will perform a variety of duties including, but not limited to the following: Prepping, priming, sanding, and refinishing company and/ or leased trucks Operate all equipment in collision center in a safe manner Document all work performed when job is completed Keep all work areas clean Qualifications, Experience & Physical Requirements: A high school diploma or equivalent Auto refinishing experience preferred Must be able to work well with others Take direction as needed Must have tools/ toolbox Knowledge of current manufacturers repair standards and experience required Must comply with all OSHA safety rules and regulations Benefits We Offer: At KLLM, we value our employees and are proud to offer a comprehensive benefits package, including: Medical, Dental, and Vision Insurance - two medical plan options to fit your needs Company-Paid Life Insurance $25,000 - additional voluntary life and AD&D coverage available Disability Coverage 401(k) Retirement Plan Paid Time Off (PTO) and paid holidays Employment is contingent upon passing a background check and drug screen. KLLM is an Equal Opportunity Employer. We are committed to creating an inclusive and respectful workplace across the company in all departments. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other legally protected characteristic. We participate in E-Verify to confirm employment eligibility in the United States. #zr