Painter jobs in Conroe, TX - 56 jobs

Under general supervision, apply coats of paint, varnish, stain, enamel, or lacquer to decorate and protect interior and exterior surfaces, trimming, and fixtures of buildings and structures throughout the district. DUTIES and RESPONSIBILITIES: * Smooth and prepare surfaces for painting, including sanding and removing old paint. * Fill nail holes, cracks, and joints with putty, plaster, and other filler. * Tape, float, and texture walls and ceilings. * Select premixed paints or mix required portions of pigment, oil, and thinning and drying substances to prepare paint to match specified colors. * Paint surfaces, using brushes, spray fun, or paint rollers, and apply paint with cloth, brush, sponge, or fingers to create special effects. * Stain, seal, and varnish wood surfaces. * Erect scaffolding or set up ladder to perform tasks above ground level. * Pick up and deliver painting supplies to capuses; maintain delivery records. * Detect needed repairs on buildings, grounds, and equipment by following established inspection procedures. * Receive and complete work orders. * Maintain accurate records on material and labor used. * Maintain inventory of tools and assist with inventory control of materials and equipment. * Inspect jobs upon completion and ensure areas are clean. * Work with building principals and supervisors to complete projects. * Operate tools, equipment, and machinery according to prescribed safety procedures. * Follow established safety procedures and techniques to perform job duties including lifting, climbing, etc. * Correct unsafe conditions in work area and report any conditions that are not correctable to supervisor immediately. * Help keep shop, equipment, and tools in safe operating condition. * Handle and dispose of paint, stain, varnish, and other chemicals according to established procedures. * Inspect tools and equipment for safety and efficiency and perform preventive maintenance as needed. * Respond to emergency calls as needed and be on-call/stand-by as assigned by supervisor. * Maintain confidentiality. * Regular attendance. * Other duties assigned. EXPERIENCE: * Four years in all phases of commercial painting QUALIFICATIONS: Education/Certification: * High School Diploma or Equivalent (prior painting experience may substitute for this requirement) * Valid Texas Driver's License Special Knowledge/Skills: * Knowledge of equipment, materials, methods, practices, and tools used in the painting trade * Ability to properly apply paints * Knowledge of and ability to mix paint to match colors * Ability to follow written and verbal instruction * Ability to work independently CONTACT INFORMATION: Mental Demands/Physical Demands/Environmental Factors: Frequent walking, standing, climbing, heavy lifting, and carrying, stooping, bending, kneeling, and reaching. Ability to operate hand and power tools and work in tiring and uncomfortable positions. Work outside and inside; on slippery or uneven walking surfaces, ladders, and scaffolding; and around machinery with moving parts. Exposure to hot and cold temperatures, excessive noises, fumes, and toxic chemicals. Frequent district wide travel. APPLY TO: All interested persons must submit an online auxiliary application to be considered for this position. Current employees must complete an application using the Internal Job Postings system. Email Carolina Banda at ******************** with questions or for additional information. SALARY: PAY GRADE: AUX - 5 - Minimum hourly rate - $20.75 DAYS: 261 START DATE: 2025-2026 School Year

Job Purpose The Shop Painter's primary responsibility is to prepare and paint drilling tools and equipment. This entry-level Shop Painter will also cross-train to assemble and repair drilling tools as well as troubleshoot and implement preventative/corrective maintenance on field equipment tools. Roles & Responsibilities Perform cleaning and general cosmetic work on Managed Pressure Drilling equipment Inspect equipment for damage and prep for painting Assist in training less experienced Painters Prioritize workload according to the planned production schedule Prepare tools for shipment and convey materials and items from receiving or production areas to storage/other designated area by hand, forklift, or other means as required and in accordance with operator training Assemble/disassemble product line tools as per procedure or Technical Work Instruction in accordance with Quality standards Troubleshoot and diagnose issues with the tools Implement mandatory modifications and/or preventive and corrective maintenance of the tools/assets Conduct testing of tools/assets to ensure integrity of assemblies Monitor, record, source and re-order day to day spares and consumables associated with the running of the plant Open crates and sort and place materials on racks/shelves/in bins as required Record operational hours on tools/assets in work order system Monitor and source spares and consumable levels to keep the plant operational and cost effective Liaise with the production/shop supervisors and leads, engineering, and other support functions as required, communicating maintenance issues and requirements Maintain daily workshop housekeeping Successfully complete training plan and competency standards as set out in the position within company guidelines Maintain a consistent level of production quality by adhering to manufacturing procedures and work instructions developing corrective action that may reduce ineffective and inefficient operation Perform various other duties and activities assigned by supervisor within the physical constraints of the job Understand and follow maintenance and repair procedures/documentation for applicable products and equipment and complete all relevant documentation Required to be available for any approved overtime outside of normal work schedule Required to be available on call for any urgent needs Experience & Education REQUIRED 2+ years in related painting experience in an industrial environment and preservation Manufacturing, repair and maintenance, or mechanic environment High school diploma or equivalent Ability to operate forklift Ability to operate overhead cranes & jib cranes PREFERRED 2+ years' experience in related product line within Energy sector (MPD or BOP preferred) Knowledge, Skills & Abilities REQUIRED Ability to wear a respirator Basic understanding of rigging equipment Basic computer skills Basic operational knowledge of crane, forklift and materials handling equipment Good communication skills, both verbal and written Ability to work well with team members as well as individually Excellent organizational skills Must be able to follow instructions Ability to lift up to 40 pounds PREFERRED Possess knowledge of workshop tools utilized by facility Knowledge of IPC requirements is a plus #LI-KP1

SUMMARY To demonstrate knowledge and skills when applying protective coatings to surfaces. RESPONSIBILITIES - Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines. - Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be covered, removing old paint and wall coverings, cracks and holes are filled and smoothed over. - Must know what materials were used to make the paint and which types of paints are required for different materials, such as plaster, wood, brick, and metal. - Must have a good eye for color to mix and match paints. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS A high school diploma or equivalent, minimum eighteen years old, and be able to work well with their hands. Ability to judge colors is important. Working knowledge of different application techniques, proper care of tools and safe use and handling of paint, solvents, and adhesives. Must be physically able to work for long periods of time with arms raised overhead. JOB REQUIREMENTS To demonstrate knowledge and skills when applying protective coatings to surfaces. RESPONSIBILITIES - Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines. - Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be covered, removing old paint and wall coverings, cracks and holes are filled and smoothed over. - Must know what materials were used to make the paint and which types of paints are required for different materials, such as plaster, wood, brick, and metal. - Must have a good eye for color to mix and match paints. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS A high school diploma or equivalent, minimum eighteen years old, and be able to work well with their hands. Ability to judge colors is important. Working knowledge of different application techniques, proper care of tools and safe use and handling of paint, solvents, and adhesives. Must be physically able to work for long periods of time with arms raised overhead. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.

Painter About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Prepare and apply industrial coatings to components and assemblies, all in accordance with ProEnergy and customer engineering standards and specifications. Reports To: Fabrication Manager Work Location: 6246 McHard Road, Houston, TX 77053 Position Responsibilities Sand and prep for paint, new and used parts and surfaces. Use airless and air supplied paint guns to paint new and used parts and surfaces. Mix and spray the correct paint per specifications. Know how to properly block, sand or featheredge existing coatings for refinishing. Mask surfaces to minimize tapelines, and overspray. Sand and buff all painted surfaces. Metal straightening and repair. Required Qualifications Vocational and or Technical certification. 2+ years related work experience. Be able to work with minimal supervision. Be able to closely follow verbal and written instructions. Technical competence (understand software, hardware, networks, etc). Must have basic metal straightening and repair skills. Must have experience with airless and air supplied paint guns. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Successful candidate will need to satisfactorily complete pre-employment drug screen and background check Desired Qualifications Mental requirements (analyzing, interpreting, organizing, problem solving, etc.) Equipment use (air grinders, drills, abrasive blasting, computer, forklift, pallet jack, airless spray equipment etc.) Working conditions (indoors/outdoors, noisy environment, dusty, etc.) Must have good hand to eye coordination. Must be able to pay attention to detail. Must learn how to use basic pneumatic grinding tools. Use basic hand tools for disassembly/assembly. Use lifting equipment. Ability to read, understand and follow instructions verbally and/or written (traveler) in English. Good communication and interpersonal skills. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

* Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt * Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rustproofing material * Prepare metal surfaces for painting, and paint equipment using brushes, spray guns, sanders, and rollers * Mix chemicals and paints, fill tanks, control viscosity, thinner, and chemicals to mixture * Determine flow and viscosity of paints and quality of coating visually or by use of viscometer * Operate spray guns, position nozzles to direct spray onto the work piece, and regulate air pressure in spray guns that atomize spray * Verify correct paint colors by reading building prints and designs * Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools * Spray foam insulation and undercoating as required in buildings * May install windows, door panes, handles, drains, or other accessories * May use a full-face ventilation mask for extended periods of time * Spray specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment * May operate lifting and moving devices to move materials and equipment and access areas to be painted * Must be able to work in enclosed spaces and extreme heat for extended periods of time Minimum Qualifications: * HS Diploma or equivalent required * One year or more experience applying industrial coatings and or paint required * Ability to do basic math and calculations required * Ability to work autonomously without direct supervision required * Analytical abilities and problem-solving skills required * Excellent communication skills both written and verbal required * US work authorization without sponsorship required * Ability to pass physical, drug, driving, and background check required * Ability to physically push, pull, and lift 75 lbs or more required * Ability to sit, stand, and walk for four plus hours at a time required * Ability to stoop and bend for four plus hours at a time required * Ability to work at heights above six feet required * Ability to work in enclosed spaces required * Alignment with company core values required Benefits: * Medical, dental, vision, HSA, term life, AD&D, STD, LTD * 100% medical premium paid for by Panelmatic for the employee-only level medical coverage * 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) * 401K, profit sharing, and ESOP contributions * Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided * PTO and paid holidays provided * Career advancement opportunities * Competitive wages * Family-friendly environment with average employee tenure above five years

Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rustproofing material Prepare metal surfaces for painting, and paint equipment using brushes, spray guns, sanders, and rollers Mix chemicals and paints, fill tanks, control viscosity, thinner, and chemicals to mixture Determine flow and viscosity of paints and quality of coating visually or by use of viscometer Operate spray guns, position nozzles to direct spray onto the work piece, and regulate air pressure in spray guns that atomize spray Verify correct paint colors by reading building prints and designs Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools Spray foam insulation and undercoating as required in buildings May install windows, door panes, handles, drains, or other accessories May use a full-face ventilation mask for extended periods of time Spray specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment May operate lifting and moving devices to move materials and equipment and access areas to be painted Must be able to work in enclosed spaces and extreme heat for extended periods of time Requirements Minimum Qualifications: HS Diploma or equivalent required One year or more experience applying industrial coatings and or paint required Ability to do basic math and calculations required Ability to work autonomously without direct supervision required Analytical abilities and problem-solving skills required Excellent communication skills both written and verbal required US work authorization without sponsorship required Ability to pass physical, drug, driving, and background check required Ability to physically push, pull, and lift 75 lbs or more required Ability to sit, stand, and walk for four plus hours at a time required Ability to stoop and bend for four plus hours at a time required Ability to work at heights above six feet required Ability to work in enclosed spaces required Alignment with company core values required Benefits Benefits: Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) 401K, profit sharing, and ESOP contributions Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

Job DescriptionBenefits: 401(k) matching Dental insurance Health insurance Paid time off Training & development Vision insurance The Industrial Painter is responsible for preparing, priming, and painting metal surfaces specifically electrical transformers and related components to ensure high-quality finishes and corrosion protection in accordance with company and industry standards. This role involves surface preparation, color matching, mixing and applying coatings, and performing quality checks to ensure compliance with specifications. 2. Key Responsibilities Must have experience painting on metal surfaces (using an airless or compressed air spray gun Perform touch-ups, repairs, or rework as needed to meet quality standards. Prepare metal surfaces mix, thin and apply paint (transformers.) cleaning, sanding, grinding, masking, or applying chemical treatments. Follow product data sheets and safety standards. Follow all environmental, health, and safety regulations, including handling and disposal of hazardous materials Apply protective coatings such as epoxy, polyurethane, or powder coatings to prevent corrosion and ensure durability. Determine paint type, color, and finish requirements. Inspect surfaces for defects, ensuring even coating, adhesion, and color consistency. Maintain painting equipment, tools to ensure proper operation and cleanliness. Assist in moving and positioning large parts or assemblies safely for painting. Record paint batches, materials used, and job completion data accurately. 3. Qualifications Experience with painting electrical transformers or large fabricated metal equipment. Education and Experience: High school diploma or equivalent (GED) preferred Minimum 1-2 years of industrial or metal painting experience, preferably in transformer, heavy equipment, or metal fabrication environments. Experience with airless spray systems Knowledge, Skills, and Abilities: Knowledge of industrial paint types, surface preparation methods, and coating systems. Ability to read and understand work orders, data sheets, and safety instructions. Strong attention to detail and commitment to quality workmanship. Physical ability to stand, bend, lift (up to 50 lbs), and work in various positions for extended periods. Knowledge of safety practices including use of PPE, ventilation systems, and hazardous material handling. Basic mechanical aptitude for maintaining spray equipment. 4. Working Conditions Work performed in a manufacturing or remote job location with exposure to paint fumes, solvents, and airborne particles. Use of respirators, protective clothing, gloves, and safety glasses required. May be required to work overtime or weekends depending on production schedules. Standing and manual labor required for the majority of the shift. 5. Physical Requirements Must be able to lift up to 50 pounds. Must be able to climb ladders, stoop, kneel, and stand for long periods. Vision requirements include color perception

Job DescriptionJob Title: Painter Produce a quality finished product each and every time by using personal skills, equipment, and established manufacturing processes associated with finished Paint coatings including wet and/or powder coat paint applications. Essential job functions: Meet and or exceed company metrics including Safety; Quality; Cost; and Delivery. Work with engineering department to reduce waste in manufacturing processes. Read and interpret drawings allowing manufacturing to build to the design intent. Apply primer and finished top coat to products produced at ACSI Keep area clean and free of any safety hazards. Adhere to established painting processes. Knowledge, skills and abilities: Knowledge of reading and understanding drawings. Ability to read and understand English. Ability to understand and execute directions from supervisor and or lead man. Knowledge of reading measurement equipment; tape measure, mil thickness gage. 2-3 years experience in paint applications associated with Steel and other metals application. 2-3 years experience with wet and or powder coating applications Physical Demands: 100% shop. Hours: Week: 40+ Lunch: 30 minutes Sitting: Standing: 50% Walking: 50% Environment: Indoor/outdoor work. Physical tasks: N/A Stress: Medium-High Performance Standards: Performance evaluation based on quality and quantity of output. Job Posted by ApplicantPro

The Maintenance Tech is a key member of the facilities maintenance team and is responsible for performing all necessary maintenance for the property. The incumbent will provide superior customer service, possess detailed knowledge of company policy and procedures, and perform essential functions as they relate to maintenance and accessibility of the property. Your Responsibilities: * Performs or assists with general appliance repairs, carpet repairs, and minor A/C and electrical repairs. * Perform or assist with carpentry work, painting, and plumbing duties as required. * Participates in an ongoing property improvement plan and preventative maintenance program. * Perform or assist in all building repairs such as installing appliance, electrical fixtures, re-key deadbolts, etc. * Adheres to and complies with OSHA and company safety policies, rules, and wears personal protective equipment (PPE) as necessary. * Practice and adhere to FirstService Residential Global Service Standards and respond to all calls by the end of the next business day. * Conduct business at all times with the highest standards of personal, professional, and ethical conduct. * Reasonable and predictable attendance. * Perform or assist with any operations as required to maintain workflow and to meet schedule. * Notify supervision of unusual equipment or operating problems and the need * for additional material and supplication. * May participate in any variety of meetings and work groups to integrate activities, communicate issues, obtain approvals, resolve problems, and maintain specified level of knowledge pertaining to new developments, requirements, policies, and regulatory guidelines. Skills - Qualifications: * High School diploma or equivalency preferred. College level course in business or hospitality preferred. * Two (2) to three (3) years of industry experience preferred with knowledge of general maintenance, make ready procedures, pool maintenance, and general ground care. * Basic command of Microsoft Office, information system hardware/software is preferred. * Must be able to work independently with minimal supervision while acting with discretion and maintaining confidentiality. * Must be a team player with a strong work ethic. * Intermediate to high level plumbing skills highly desired. What We Offer: As a full-time non-exempt associate, you will be eligible for full comprehensive benefits to include your choice of multiple medical plans, dental, and vision. In addition, you will be eligible for time off benefits, paid holidays, and a 401k with company match. Occasional travel may be required to attend training and other company functions. Compensation: $20 / hour Disclaimer: This is not an all-inclusive job description; therefore, management has the right to assign or reassign schedules, duties, and responsibilities to this job at any time. #LI-DNI #I-HR1

Full-time Description Provides painting services with specific responsibility for identifying repair and maintenance needs; preparing, painting, staining and/or wallpapering a variety of surfaces; ensuring completion of projects in accordance with trade standards; and assisting other maintenance staff. Essential Functions Paints interior and exterior surfaces to include walls, doors, woodwork, ceilings, hand railings, stair casings, signs, etc. Prepares surface for painting including cleaning, taping, bedding, sanding, patching cracks and holes, and texturing of surfaces. Erects scaffolding, removes furnishings and covers carpeting prior to painting; cleans and restores area after painting. Works with various types of paints, solvents, lacquers, enamels, stains and varnishes; matches colors and textures on adjacent surfaces. Cleans brushes and ensures that tools and equipment are properly maintained. Monitors buildings and facilities for the purpose of evaluating condition, identifying necessary repairs and recommending preventive maintenance. Paints a variety of surfaces (e.g. buildings, parking lot line striping and markings, floors, lockers, etc.) for the purpose of maintaining facilities in an attractive, safe, and usable condition. May provide information order to identify needed supplies to supervisor for preparation of requisitions; may assist in the maintenance of inventory of paint, supplies and equipment. Prepares a variety of surfaces, furniture, fixtures and cabinets (e.g. stripping, cleaning, sanding, patching, masking, nail holes, cracks, joints, etc.) for the purpose of ensuring that they are ready for painting and/or refinishing. Prepares requisitions for paint supplies and equipment. Observes safety regulations and safe work practices; ensures proper disposal of hazardous materials. Participates in meetings, workshops and trainings for the purpose of conveying and/or gathering information required to perform job functions Completes work orders accurately and timely Keeps shop and work area clean, organized and clear of debris. Cleans and reorganizes after every job/repair. Properly stores chemicals, paint, flammables and equipment. Follows all OSHA safety guidelines Assures proper use and handling of ladders, tools and equipment. Responds to calls from staff and members for maintenance and other needs. Assists maintenance crew as needed on tasks, such as moving materials, equipment, cleanliness, etc. Perform all work related duties as assigned by supervisor or Manager Interaction Occasional interaction with members and vendors Working Conditions Worker is subject to hot, humid and/or cold temperatures Schedule Monday to Friday, 7 am to 3:30 pm. The schedule is subject to change based on business needs. Must be able to work weekends, holidays and as needed. BENEFITS AND INCENTIVES OFFERED - (waiting period applies) Medical, Dental and Vision Insurance Paid Maternity Leave 401-K Retirement Plan Free Life Insurance Voluntary Short-Term Disability Voluntary Life Insurance Vacation Sick Pay Holiday Pay (12/25 & 1/1) Paid Funeral Leave Paid Jury Duty Daily Complimentary Meals Employee Referral Program Scholarship Program Holiday/Christmas Bonus Employee of the Month Leadership Awards (mid-level managers & supervisors) Summer and Holiday Parties Recognition Awards Birthday Meals Gift Card Program Requirements Education and Experience 2 year minimum experience as painter Minimum High School or GED preferred Required Knowledge and Skills To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Knowledge or ability to learn paint color matching and texture matching. Knowledge of methods, techniques, materials, tools, and equipment of the painting trade. Knowledge of the methods of preparing wood, metal, plaster, and other surfaces for finishing and refinishing. Knowledge of the different types of paints, stains, enamels, varnishes, and lacquers and their uses. Ability to use various tools and equipment related to the painting trade. Ability to work from heights (on ladders, scaffolds, and platforms), stand for long periods, and move heavy equipment, materials, structures and furniture. Must possess an outgoing personality Must possess honesty and integrity Must be courteous and tactful at all times Must treat others with kindness and respect Ability to effectively communicate in a professional manner to employees and managers. Wear (PPE)personal protective equipment when using power tools Wear sturdy work shoes with steel toe Must show up to work on time and follow the schedule. Ability to understand and follow posted rules and procedures Ability to follow directions from a supervisor Follow all OSHA and Club safety regulations. Physical Functions: The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is occasionally required to stand, walk, climb stairs, balance stoop, kneel, crouch, crawl and/or sit up to eight hours per day. Use hands to finger, handle, or feel objects, tools and/or controls. Reach with hands and arms. Hearing and talking sufficient enough to communicate with members, guests, vendors, and staff. Specific vision abilities include close vision, vision sufficient enough to read, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Must be able to lift and carry up to 50 lbs. Independent mobility throughout club property.

Integrity Staffing has exciting new opportunities for Shipyard Sandblaster/Painters in the Houston, TX area! Roles & Responsibilities: Sandblast barge & boat repair areas, internal compartments & cargo tanks, and external surface areas, and clean/remove blasting material residue from those surfaces in preparation for painting. Paint barge & boat repair areas, internal compartments & cargo tanks, external surface areas, and specialty components & areas with the required number of coats and coverage. Operate equipment, vacuum pumps, air pumps, compressors, blowers, meters, hoses, etc., to accomplish sandblast & paint duties. Must have experience using 2 inch hose, #7 Nozzle, blasts with 120 PSI, and uses airless sprayer. Qualifications and Education Requirements: Must have 1-3 years experience Painting and Sandblasting in an Industrial Manufacturing environment. Be able to perform simple paperwork as required for filling out forms and logs. The employee frequently works near moving mechanical parts and regularly works in outside weather conditions. Walking, stepping, climbing, or otherwise moving from one location on the job site to another, which may be of varying heights and access parameters. Standing, stooping, bending, crouching, kneeling, squatting, climbing, or sitting for long periods of time. Repetitive movements by feet, shoulders, arms, wrists, hands, and back in the performance of work. Climbing vertical ladders of a height of 6ft or greater. Working in confined work areas and/or elevated heights. Frequent lifting and carrying of objects and the ability to lift and carry in excess of 120 lbs. with assistance. Adapting to temperature changes, outdoor conditions, and prolonged exposure to dusty, wet, or humid conditions, loud noises, and vibration. Schedule: Monday-Sunday 6am-3:30pm and 3:30pm-12am (midnight) Monday-Sunday 5am-2:30pm and 3:00pm-1am Pay: $17-$22/hour #I08

Job Title: Blaster/Painter Reports to: Coating Manager Pay Schedule: Hourly/non-exempt Pay Rate: depending on experience SUMMARY: Performs all day to day activities as instructed by the Coatings Manager, to support paint production, warehouse and production operations. REQUIRED Essential duties and responsibilities: Clean and prepare parts for paint following established procedures. Blast parts as required per coatings specification. Stencil parts as required. Read, interpret and follow blueprints, diagrams, engineered drawings, specifications and other written instructions or procedures to accurately coat equipment or products. Mix paint per coating specifications as instructed in work order. Load parts or equipment for paint on racks or tables. Hang or place parts for coating process in designated areas. Coat parts as instructed in work order or as directed by supervisor. Perform quality checks as required during coatings applications. Mask parts as required per customer drawings or instructions. Touch up, unmask and place completed parts on shipping pallets. Perform routine maintenance on equipment daily or as instructed. Upkeep of paint booths including storage cabinets and mixing room. Confer with supervisor regarding quality or procedure problems. Clock in on all applicable work orders. Monitor and submit request for shop tools and supplies. Move products or equipment by use of forklift. Upkeep and cleanliness of work areas. Follow company safety & security guidelines Attendance and punctuality are essential functions of this job. Other duties as needed. QUALIFICATIONS: To perform this job successfully an individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. REQUIRED EDUCATION and/or EXPERIENCE: 3 to 5 years of related experience Must understand how to use wet and dry film thickness gauges & calculate to determine wet film thickness form volume solids Experience using paint pots and conventional spray guns Experience to paint intricate surfaces, such as: valves, actuators, subsea equipment, etc. Must be experienced on applying (3) coat epoxy. DESIRED EDUCATION and/or EXPERIENCE: ·High School Diploma or GED or equivalent PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is frequently required to stand while performing the duties of this job (approx. 80%) walk (15%) and occasionally sit (5%). The employee is expected to lift or move materials (75% of workday) weighing up to 10-30 lbs. DISCLAIMER The preceding job description has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. M / F / Disability / Vet / EOE **********DRUG FREE WORKPLACE******* FabCorp/Hammonds is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to, among other things, race, religion, color, national origin, sex, status as a protected veteran, or disability.

Job Purpose The Shop Painter's primary responsibility is to prepare and paint drilling tools and equipment. This entry-level Shop Painter will also cross-train to assemble and repair drilling tools as well as troubleshoot and implement preventative/corrective maintenance on field equipment tools. Roles & Responsibilities Perform cleaning and general cosmetic work on Managed Pressure Drilling equipment Inspect equipment for damage and prep for painting Assist in training less experienced Painters Prioritize workload according to the planned production schedule Prepare tools for shipment and convey materials and items from receiving or production areas to storage/other designated area by hand, forklift, or other means as required and in accordance with operator training Assemble/disassemble product line tools as per procedure or Technical Work Instruction in accordance with Quality standards Troubleshoot and diagnose issues with the tools Implement mandatory modifications and/or preventive and corrective maintenance of the tools/assets Conduct testing of tools/assets to ensure integrity of assemblies Monitor, record, source and re-order day to day spares and consumables associated with the running of the plant Open crates and sort and place materials on racks/shelves/in bins as required Record operational hours on tools/assets in work order system Monitor and source spares and consumable levels to keep the plant operational and cost effective Liaise with the production/shop supervisors and leads, engineering, and other support functions as required, communicating maintenance issues and requirements Maintain daily workshop housekeeping Successfully complete training plan and competency standards as set out in the position within company guidelines Maintain a consistent level of production quality by adhering to manufacturing procedures and work instructions developing corrective action that may reduce ineffective and inefficient operation Perform various other duties and activities assigned by supervisor within the physical constraints of the job Understand and follow maintenance and repair procedures/documentation for applicable products and equipment and complete all relevant documentation Required to be available for any approved overtime outside of normal work schedule Required to be available on call for any urgent needs Experience & Education REQUIRED 2+ years in related painting experience in an industrial environment and preservation Manufacturing, repair and maintenance, or mechanic environment High school diploma or equivalent Ability to operate forklift Ability to operate overhead cranes & jib cranes PREFERRED 2+ years' experience in related product line within Energy sector (MPD or BOP preferred) Knowledge, Skills & Abilities REQUIRED Ability to wear a respirator Basic understanding of rigging equipment Basic computer skills Basic operational knowledge of crane, forklift and materials handling equipment Good communication skills, both verbal and written Ability to work well with team members as well as individually Excellent organizational skills Must be able to follow instructions Ability to lift up to 40 pounds PREFERRED Possess knowledge of workshop tools utilized by facility Knowledge of IPC requirements is a plus #LI-KP1

SUMMARY To demonstrate knowledge and skills when applying protective coatings to surfaces. RESPONSIBILITIES - Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines. - Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be covered, removing old paint and wall coverings, cracks and holes are filled and smoothed over. - Must know what materials were used to make the paint and which types of paints are required for different materials, such as plaster, wood, brick, and metal. - Must have a good eye for color to mix and match paints. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS A high school diploma or equivalent, minimum eighteen years old, and be able to work well with their hands. Ability to judge colors is important. Working knowledge of different application techniques, proper care of tools and safe use and handling of paint, solvents, and adhesives. Must be physically able to work for long periods of time with arms raised overhead.

Job Description Immerse parts in solution or wash surfaces to remove grease, rust, scale, and dirt Set up and operate painting equipment to coat metal products with lacquer, paint, varnish, enamel, oil, or rustproofing material Prepare metal surfaces for painting, and paint equipment using brushes, spray guns, sanders, and rollers Mix chemicals and paints, fill tanks, control viscosity, thinner, and chemicals to mixture Determine flow and viscosity of paints and quality of coating visually or by use of viscometer Operate spray guns, position nozzles to direct spray onto the work piece, and regulate air pressure in spray guns that atomize spray Verify correct paint colors by reading building prints and designs Strip, sand, mask, and repaint surfaces, blend and polish finish to match surrounding areas, manually or using portable power tools Spray foam insulation and undercoating as required in buildings May install windows, door panes, handles, drains, or other accessories May use a full-face ventilation mask for extended periods of time Spray specified amount or thickness of primer, protective, decorative, or finish coatings, such as paint, lacquer, sealer, or enamel, onto prepared surfaces, using spray equipment May operate lifting and moving devices to move materials and equipment and access areas to be painted Must be able to work in enclosed spaces and extreme heat for extended periods of time Requirements Minimum Qualifications: HS Diploma or equivalent required One year or more experience applying industrial coatings and or paint required Ability to do basic math and calculations required Ability to work autonomously without direct supervision required Analytical abilities and problem-solving skills required Excellent communication skills both written and verbal required US work authorization without sponsorship required Ability to pass physical, drug, driving, and background check required Ability to physically push, pull, and lift 75 lbs or more required Ability to sit, stand, and walk for four plus hours at a time required Ability to stoop and bend for four plus hours at a time required Ability to work at heights above six feet required Ability to work in enclosed spaces required Alignment with company core values required Benefits Benefits: Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid for by Panelmatic and 20% paid for by the employee on all other level medical coverage (ie employee plus child, employee plus spouse, family) 401K, profit sharing, and ESOP contributions Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

Produce a quality finished product each and every time by using personal skills, equipment, and established manufacturing processes associated with finished Paint coatings including wet and/or powder coat paint applications. Essential job functions: Meet and or exceed company metrics including Safety; Quality; Cost; and Delivery. Work with engineering department to reduce waste in manufacturing processes. Read and interpret drawings allowing manufacturing to build to the design intent. Apply primer and finished top coat to products produced at ACSI Keep area clean and free of any safety hazards. Adhere to established painting processes. Knowledge, skills and abilities: Knowledge of reading and understanding drawings. Ability to read and understand English. Ability to understand and execute directions from supervisor and or lead man. Knowledge of reading measurement equipment; tape measure, mil thickness gage. 2-3 years experience in paint applications associated with Steel and other metals application. 2-3 years experience with wet and or powder coating applications Physical Demands: 100% shop. Hours: Week: 40+ Lunch: 30 minutes Sitting: Standing: 50% Walking: 50% Environment: Indoor/outdoor work. Physical tasks: N/A Stress: Medium-High Performance Standards: Performance evaluation based on quality and quantity of output.

Provides painting services with specific responsibility for identifying repair and maintenance needs; preparing, painting, staining and/or wallpapering a variety of surfaces; ensuring completion of projects in accordance with trade standards; and assisting other maintenance staff. Essential Functions * Paints interior and exterior surfaces to include walls, doors, woodwork, ceilings, hand railings, stair casings, signs, etc. * Prepares surface for painting including cleaning, taping, bedding, sanding, patching cracks and holes, and texturing of surfaces. * Erects scaffolding, removes furnishings and covers carpeting prior to painting; cleans and restores area after painting. * Works with various types of paints, solvents, lacquers, enamels, stains and varnishes; matches colors and textures on adjacent surfaces. * Cleans brushes and ensures that tools and equipment are properly maintained. * Monitors buildings and facilities for the purpose of evaluating condition, identifying necessary repairs and recommending preventive maintenance. * Paints a variety of surfaces (e.g. buildings, parking lot line striping and markings, floors, lockers, etc.) for the purpose of maintaining facilities in an attractive, safe, and usable condition. * May provide information order to identify needed supplies to supervisor for preparation of requisitions; may assist in the maintenance of inventory of paint, supplies and equipment. * Prepares a variety of surfaces, furniture, fixtures and cabinets (e.g. stripping, cleaning, sanding, patching, masking, nail holes, cracks, joints, etc.) for the purpose of ensuring that they are ready for painting and/or refinishing. * Prepares requisitions for paint supplies and equipment. * Observes safety regulations and safe work practices; ensures proper disposal of hazardous materials. * Participates in meetings, workshops and trainings for the purpose of conveying and/or gathering information required to perform job functions * Completes work orders accurately and timely * Keeps shop and work area clean, organized and clear of debris. * Cleans and reorganizes after every job/repair. * Properly stores chemicals, paint, flammables and equipment. * Follows all OSHA safety guidelines * Assures proper use and handling of ladders, tools and equipment. * Responds to calls from staff and members for maintenance and other needs. * Assists maintenance crew as needed on tasks, such as moving materials, equipment, cleanliness, etc. * Perform all work related duties as assigned by supervisor or Manager Interaction * Occasional interaction with members and vendors Working Conditions * Worker is subject to hot, humid and/or cold temperatures Schedule * Monday to Friday, 7 am to 3:30 pm. The schedule is subject to change based on business needs. * Must be able to work weekends, holidays and as needed. BENEFITS AND INCENTIVES OFFERED - (waiting period applies) Medical, Dental and Vision Insurance Paid Maternity Leave 401-K Retirement Plan Free Life Insurance Voluntary Short-Term Disability Voluntary Life Insurance Vacation Sick Pay Holiday Pay (12/25 & 1/1) Paid Funeral Leave Paid Jury Duty Daily Complimentary Meals Employee Referral Program Scholarship Program Holiday/Christmas Bonus Employee of the Month Leadership Awards (mid-level managers & supervisors) Summer and Holiday Parties Recognition Awards Birthday Meals Gift Card Program Requirements Education and Experience * 2 year minimum experience as painter * Minimum High School or GED preferred Required Knowledge and Skills * To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. * Knowledge or ability to learn paint color matching and texture matching. * Knowledge of methods, techniques, materials, tools, and equipment of the painting trade. * Knowledge of the methods of preparing wood, metal, plaster, and other surfaces for finishing and refinishing. * Knowledge of the different types of paints, stains, enamels, varnishes, and lacquers and their uses. * Ability to use various tools and equipment related to the painting trade. * Ability to work from heights (on ladders, scaffolds, and platforms), stand for long periods, and move heavy equipment, materials, structures and furniture. * Must possess an outgoing personality * Must possess honesty and integrity * Must be courteous and tactful at all times * Must treat others with kindness and respect * Ability to effectively communicate in a professional manner to employees and managers. * Wear (PPE)personal protective equipment when using power tools * Wear sturdy work shoes with steel toe * Must show up to work on time and follow the schedule. * Ability to understand and follow posted rules and procedures * Ability to follow directions from a supervisor * Follow all OSHA and Club safety regulations. Physical Functions: * The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is occasionally required to stand, walk, climb stairs, balance stoop, kneel, crouch, crawl and/or sit up to eight hours per day. * Use hands to finger, handle, or feel objects, tools and/or controls. * Reach with hands and arms. * Hearing and talking sufficient enough to communicate with members, guests, vendors, and staff. * Specific vision abilities include close vision, vision sufficient enough to read, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. * Must be able to lift and carry up to 50 lbs. * Independent mobility throughout club property.

Paint Supervisor About PROENERGY PROENERGY is a global and vertically integrated energy transition platform. Focused exclusively on fast-start, dispatchable power, our company supports both energy security and renewable growth with complete turbine services, project development, equipment manufacturing, turnkey generation facilities, operations, and maintenance. Our Footprint We are primed for the energy transition with permanent service locations in Missouri, Texas, and Argentina. Our world-class Missouri headquarters is purpose-built to meet dispatchable power needs. It sits on 90 acres in Sedalia and features more than 600,000 sq. ft of service capacity under roof, which includes the only independent Level-IV aeroderivative depot and string-test facility in the world. Our Houston, Texas, office is a strategic satellite positioned near our own dispatchable power installations. Our Philosophy We take care of our people and strive to make a positive difference for the world. We offer competitive pay, excellent benefits that include Medical, Dental, Vision, and Life/Disability Insurance at minimal cost to the employee, 10 paid holidays, paid time off, and a 401K plan. If you are looking for a rewarding career and possess specialized knowledge and quality-oriented problem-solving skills, we encourage you to apply today. Position Summary Effectively manage the PROENERGY paint shop with the aim of achieving optimum quality and customer satisfaction. Reports To: Fabrication Manager Work Location: 8310 McHard Road, Houston, TX 77053 Position Responsibilities Supervise Paint Shop employees and manage daily operations. Order and maintain paint supplies and equipment, ensuring the shop stays organized and well-maintained. Oversee all surface preparation work before painting. Ensure all work meets safety, legal, customer, and internal PES standards. Deliver excellent customer service and promote positive work practices within the shop. Meet performance goals and production targets. Motivate and support team members to achieve Key Performance Indicators (KPIs). Supervisor Expectations Communication Communicate clearly and effectively with employees and other departments. Conduct both formal and informal evaluations of direct reports. Make sure employees understand expectations for safety, quality, and productivity. Share company updates, policies, and performance expectations with the team. Collaborate with other supervisors and participate in daily pass-down meetings. Reporting and Administration Ensure all safety incidents and near misses are reported and escalated according to company policy. Oversee quality reporting, including NCRs, redlines, and part inspections. Maintain accurate timekeeping, approve payroll, and manage PTO requests. Submit Helpdesk tickets and request tools or consumables as needed. Communicate and document schedule progress. Write mid-year and annual performance reviews for direct reports. Prepare documentation for performance or disciplinary actions when necessary. Continuous Improvement Lead and participate in shop improvement teams and follow through on action items. Maintain and enhance 5S standards throughout the shop. Address and correct policy or behavior issues promptly and escalate when needed. Recognize and communicate strong performance from individuals or teams. Suggest and share ideas for design or process improvements. Track and report manpower hours and performance against goals. Required Qualifications Minimum high school diploma or GED, or relevant work experience in lieu of education. Material handling equipment experience: Must have ability to operate forklift safely. Must have the ability and knowledge to rig properly and safely run an overhead style crane. Minimum of six months experience with either supervising or providing technical direction to a team. US work authorization is a precondition of employment. The company will not consider candidates who require sponsorship for a work-authorized visa. Successful candidate will need to satisfactorily complete pre-employment drug screen and background check Desired Qualifications Associate degree from two-year college in a related technical field or certificate or diploma from trade school in related field and 5+ years' experience in industrial painting or equivalent combination of education and experience. 3 + years' experience with directly supervising maintenance staff. Experience carrying out responsibilities in accordance with the organization's policies and applicable laws. Technical competence including understanding software, hardware, networks, etc. It is PROENERGY's policy to provide equal opportunity in employment to all its employees and applicants for employment without regard to race, color, religion, sex, pregnancy, age, disability, national origin, marital status, ancestry, medical condition, military status, or any other characteristic protected by State or Federal law.

SUMMARY To demonstrate knowledge and skills when applying protective coatings to surfaces. RESPONSIBILITIES - Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines. - Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be covered, removing old paint and wall coverings, cracks and holes are filled and smoothed over. - Must know what materials were used to make the paint and which types of paints are required for different materials, such as plaster, wood, brick, and metal. - Must have a good eye for color to mix and match paints. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS A high school diploma or equivalent, minimum eighteen years old, and be able to work well with their hands. Ability to judge colors is important. Working knowledge of different application techniques, proper care of tools and safe use and handling of paint, solvents, and adhesives. Must be physically able to work for long periods of time with arms raised overhead. JOB REQUIREMENTS To demonstrate knowledge and skills when applying protective coatings to surfaces. RESPONSIBILITIES - Apply paint, varnish, and other finishes to walls, ceilings, and other surfaces with brushes, rollers, and spray machines. - Prepare the surfaces to receive the coatings by cleaning the dirt, oil, and grease from the surfaces to be covered, removing old paint and wall coverings, cracks and holes are filled and smoothed over. - Must know what materials were used to make the paint and which types of paints are required for different materials, such as plaster, wood, brick, and metal. - Must have a good eye for color to mix and match paints. - Responsible for observing and complying with all safety and project rules. Performs other duties as required. QUALIFICATIONS A high school diploma or equivalent, minimum eighteen years old, and be able to work well with their hands. Ability to judge colors is important. Working knowledge of different application techniques, proper care of tools and safe use and handling of paint, solvents, and adhesives. Must be physically able to work for long periods of time with arms raised overhead. Brown & Root Industrial Services is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law. BENEFITS: Brown and Root offers a selection of competitive lifestyle benefits which include a 401K plan with company match, medical, dental, vision, life insurance, AD&D, flexible spending account, disability, paid time off, and flexible work schedule. We support career advancement through professional training and development.