$15 Per Hour Pierceton, IN jobs - 5,540 jobs

Under general supervision of Terminal Supervisor, the Terminal Operator is responsible for operating all Terminal equipment in connection with receiving, storing, transferring, and loading of refined petroleum products in a reliable and efficient manner while in compliance with the Partnership's procedures and regulatory requirements. Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. The essential job duties for this position are listed below: * Gauge storage tanks and take meter readings for all products on a daily basis * Provide top-tier customer service to commercial and operations customer representatives * Calculate and input all product inventories and meter readings into appropriate systems * Perform daily and monthly reconciliation of product inventories and thru-puts * Perform facility maintenance on office building, assets, vegetation, as needed * Perform the safe loading of petroleum products onto trucks and receive products from pipelines * Travel to various refined products and crude facilities with little notice to effectively assist terminals across the organization * Take product samples as required and perform/log required Quality control tests * Perform and log all scheduled maintenance and compliance inspections * Ensure that all terminal equipment is functioning properly and report failures to supervisor * Perform daily walk around inspections to identify potential risks and ensure good housekeeping standards are maintained * Issue work permits to contractors performing work at the Terminal. This includes ensuring that pre-job safety meetings, lockout - tag-out, confined space entry, and gas tech monitoring requirements are met for all work performed at the Terminal * Correcting or stopping all unsafe acts or conditions not in accordance with Company Policies and Procedures by any party entering the facility * Remain knowledgeable of, and prepared to enact and coordinate the Emergency Response activities until relieved by supervisor or management personnel * Communicate product outages and equipment downtime to supervisor, customers, and other impacted parties in a prompt fashion Required Education: * High school diploma or GED Minimum Requirements: * Effectively communicate with peers and management of various levels * Self-starter able work with little or no supervision * Carry a pager or cell phone allowing for shift hold over or shift reassignment, as well as call out at all hours * Able to use basic hand tools and operate basic product testing equipment * Proficient in mathematics and able to perform all required calculations * Proficient with Microsoft Suite * Must be able to communicate clearly and effectively, both orally and written * Must have and maintain a valid driver's license for state of residence * Able to notice subtle Color differences in product samples * Must be willing and able to work as a part of team, take direction from supervisor(s), prioritize work schedules, focus attention to details, and follow work rules. * Will be required, after 3-month training period, to work a 2nd shift. Hours will be 3:00 PM - 11:30 PM. The selected candidate will also be required to be on a rotating weekend overtime coverage. Working Conditions and Requirements: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. * Frequent exposure to heat, cold, and other adverse weather conditions * Work in and around industrial and construction settings, which may include hazardous products, processes, materials and chemicals, as well as extreme temperature conditions and loud machinery, and require appropriate personal protective equipment * Frequent heavy lifting with and without assistance * Work on and around equipment and facilities that require knowledge of and adherence to safe work procedures and practices * Subject to call-outs to respond to operational issues and emergencies after working hours, at night, and on weekends and holidays * Reliable attendance at work * Occasional overnight travel may be required Equal Opportunity Employer/Minority/Female/Disabled/Veteran The nature and frequency of the above working conditions and requirements may vary depending on individual operational circumstances. Where feasible, the Partnership will make reasonable accommodations to qualified individuals with disabilities to enable them to perform the essential functions of the job. DISCLAIMER: The above statements, which are subject to change, are intended to describe the general nature and level of work being performed by people assigned to this job. They are not intended to be an exhaustive list of all responsibilities, duties and skills required of personnel so classified.

Job Title Business Unit Department Reports To Plant Manager LeMar Production Manufacturing Unit GM BU Location BU Acceptance Approved By: Date Approved Des Moines, IA Overall Purpose: Why the Job Exists & What You Will Do: As the Plant Manager, you will manage the operations - including production, warehouse, maintenance, and facility - to ensure business goals are attained within budget, on-time, complete and error-free. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Operations & Facility Management: 60% of the Job Leads the production and scheduling of customer orders - ensuring orders meet the on-time, complete and error-free goals. Manages and controls costs to ensure budget goals are attained in the areas of scrap, material usage, overtime, tools, and supplies. Identifies, creates, implements and measures Lean-thinking and 5S initiatives within the facility to continually enhance quality output, reduce cost and maintain best practices within production. Manages the safety and maintenance of the facility and equipment - initiating Capital Expense requests where applicable. Collaborates with customers, Customer Service, and vendors on innovative solutions with issues and to ensure smooth processes for all involved. Manages and maintains inventory levels, including production supplies to ensure production goals are maintained and achieved. Maintenance Management & Support: 20% of the Job Leads and manages the maintenance team to reduce machine downtime through efficient and effective on-going maintenance. Provides technical support and troubleshooting guidance to resolve equipment and process issues. Researches, develops, manages and executes on capital budget maintenance projects to ensure project goals are achieved. Plant Leadership: 20% of the Job Leads, mentors, and develops team members to continually grow competencies within the facility while creating a challenging work environment that retains top talent. Provides ongoing guidance to the management team and collaborates with Corporate HR on recruiting, hiring, development, coaching, performance, pay programs and turnover to ensure compliance within company policies and procedures. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education/Certifications: Bachelor's degree in Manufacturing, Engineering, or other related field; or equivalent of coursework and experience; Six Sigma or Lean certifications highly preferred, but not required Experience: 5+ years of progressive Leadership/Management experience within a manufacturing environment - including P&L responsibility & experience with annual budgeting process. Experience in steel/metal fabrication environment preferred, but not required. Functional Skills: Strong budgeting, planning, production scheduling, and hands-on production experience to meet the goals; Lean-thinking and process improvement skills; thorough understanding of the complete supply chain process; Safety/OSHA experience; Strong attention to detail and excellent decision-making skills. Technology Skills: Above average experience with ERP systems and Microsoft Office programs. Language Skills: Excellent written and verbal communication skills are needed to communicate with all levels of the organization. Leadership/Behaviors: Strong servant-leadership skills; Ability to mentor, engage, and grow a team; Demonstrates a high ability to meet goals and problem-solving; balances sense of urgency with hands-on mentoring and leading on the lines. Experience as a “Change Agent” and ability to lead with a vision to align and motivate teams. Culture Match: The right person will be able to work within a collaborative team environment; Will be exceptional at listening and responding effectively and is authentic, supportive personality with high-integrity; and will have the natural ability to take a vision and turn it into a concept. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines, along with some hand-held tools. Physical Requirements to Perform Essential Functions: Ability to stand for up to 4-8 hours in one session Ability to use hands and fingers to operate hand inspection tools/equipment and machinery as needed throughout the day Ability to visually compare product with quality specifications as needed throughout the day Ability to operate keyboard and view computer screen as needed throughout the day Ability to write ideas/information in a logical flow as needed throughout the day Cognitive and reasoning ability to read, review and interpret work orders or processes on a frequent basis Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to communicate with others in-person, as needed throughout the day Ability to read, write and speak English fluently Ability to listen to customers (internal), problem-solve, and respond accordingly Ability to bend, reach, kneel, squat, twist, push, pull, stand, sit, walk, stoop, crouch, and carry items frequently Lifting up to 50+ lbs. sporadically Environmental Conditions & Travel: This position is regularly exposed to a manufacturing environment where the noise level is moderate to high and personal protective equipment such as hard hats, safety glasses, ear plugs, and steel toed shoes are required. The position may face exposure to some high-heat areas; not air-conditioned in the summer, heated in the winter. This position may face inclement weather conditions when performing occasional work outdoors or when traveling. Travel: 15% travel.

This position supports the work of the Y, a leading nonprofit, charitable organization committed to strengthening community through youth development, healthy living and social responsibility. The Office Assistant at Camp Crosley YMCA will be under the guidance and supervision of the Facility Director of Camp Crosley. The Groundskeeper will be responsible in assisting in tasks and duties that help maintain the grounds and facility of camp. This also includes preventive measures to the designated facility and grounds. OUR CULTURE: Our mission and core values are brought to life by our culture. In the Y, we strive to live our cause of strengthening communities with purpose and intentionality every day. We are welcoming: we are open to all. We are a place where you can belong and become. We are genuine: we value you and embrace your individuality. We are hopeful: we believe in you and your potential to become a catalyst in the world. We are nurturing: we support you in your journey to develop your full potential. We are determined: above all else, we are on a relentless quest to make our community stronger beginning with you. ESSENTIAL FUNCTIONS: Attend staff training as time permits Maintain facilities for trash collection and recycling Assist in moving materials and supplies to appropriate areas in camp as needed Maintain inventory of maintenance supplies and equipment Be available during all times when campers are present for emergencies and be acquainted with procedures Obtain all required training for using mechanical equipment Operate lawn equipment, keep equipment in good operating condition, and maintain lawn facilities Repair or request repair of equipment through maintenance supervisor Maintain grounds to reduce risk of danger to persons using grounds and facilities Inspect buildings weekly and report and repair damages as necessary Check daily in office for maintenance requests; verify all requests with supervisor Check and repair chairs and benches Repair and/or rebuild docks Inspect and make necessary repairs on all doors, screen doors, windows, floor boards, light bulbs, etc Inspect all buildings and paint when necessary Inspect camp for trees that may need thinning, limbs removed, etc. Prepare trees for contracted tree maintenance work. Keep woodshed filled with appropriately split wood for campfires Repair and adjust small motors (mowers, blowers, and cutters) Communicate daily with maintenance supervisor and set up a workable and productive schedule Assist in maintaining cleanliness of Dining Hall area, (ie, trash and recycling removal, floor cleaning, diswashing) These are not the only duties performed. Some duties may be reassigned and other duties may be assigned as required. LEADERSHIP COMPETENCY MODEL: OUR DISCIPLINES & COMPETENCIES ADVANCING OUR MISSION AND CAUSE provides visionary leadership to the organization and to ensure that all resources are mobilized to adapt to new challenges and needs in the community Change Leadership: Facilitates, co-creates, and implements equitable change for the good of the organization and/or community Engaging Community: Builds bridges with others in the community to ensure the Y's work is community-focused and welcoming of all, providing community benefit Philanthropy: Secures resources and support to advance the Y's work Volunteerism: Engages volunteers and promotes social responsibility at all levels of the organization BUILDING RELATIONSHIPS connect people to the Y's cause by developing inclusive relationships, partnerships and collaborations so that Ys can co-create solutions to pressing social needs Collaboration: Creates sustainable relationships within the Y and with other organizations in service to the community Communication & Influence: Listens and expresses self effectively and in a way that engages, inspires, and builds commitment to the Y's cause Inclusion: Values all people for their unique talents, and takes an active role in promoting practices that support diversity, inclusion, and global work, as well as cultural competence LEADING OPERATIONS ensure relevance, effectiveness, and sustainability of the organization so that we can continue to fulfill our promise to the community Critical Thinking & Decision Making: Makes informed decisions based on logic, data, and sound judgment Fiscal Management: Manages the Y's resources responsibly and sustains the Y's nonprofit business model Functional Expertise: Executes superior technical skills for the role Innovation: Creates and implements new and relevant approaches and activities that improve and expand the Y's work and impact in the community Program/Project Management: Ensures program or project goals are met and intended impact occurs DEVELOPING & INSPIRING PEOPLE support the holistic development of self and others so that everyone can embrace the Y's cause, sustain the Y's culture, and inspire others to take individual and collective action to further our impact Developing Self & Others: Develops self and supports others (e.g., staff, volunteers, members, program participants), both formally and informally, to achieve their highest potential Emotional Maturity : Demonstrates ability to understand and manage emotions effectively in all situations QUALIFICATIONS: Mature, capable, mechanically-oriented person Skill in using small lawn machines, driving lawn equipment and ability to use hand tools Ability to work with and accept guidance and supervision from others Desire to live in and work in a camp community Self-starter and organizer WORK ENVIRONMENT & PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly moving and remains active throughout the duration of the day. The employee frequently is required stand and must be able to move around the work environment for long periods of time. The employee must occasionally lift and/or move up to 50 pounds. AGREEMENT: I have read and understand the above position description and accept the agreed upon salary and conditions indicated. I agree to fulfill all requiremenmts necessary for the performance of all job segments as described. I understand that peridoic performance reviews will become the basis for future merit increases, and that satisfactory performance is the sole condition of increased compensation. By performance and through behavior and interation with other employees, members, and guest, I will further the goals/objectives of Camp Crosley and the YMCA of Muncie and will make a positive contribution to the successful potential of the YMCA of Muncie.

Children's Discipleship Coordinator - First Brethren Church Job Purpose: Direct, lead, and partner with the Children's Discipleship Ministry (CDM) team to spiritually nurture newborns through sixth grade children and to equip parents to be the primary spiritual influencers in their homes with the common goal of helping children develop a lifelong relationship with Jesus. Introduction and Information: First Brethren Church is seeking qualified candidates to submit their resumes and cover letter with a short bio. North Manchester is located 25 miles southwest of Fort Wayne, Indiana between Warsaw and Wabash. Our small college town has a population of about 8,000 and is a great place to raise a family. First Brethren is an intergenerational church with a worship average around 225, 38 of which are children/infants. Annual compensation of $45,000+ will be based on education and experience. Additional funds are available for transportation, conferences, and personal ministry expenses. Final salary and additional benefits (healthcare option, etc.) will be determined following interviews. Scope of Responsibilities: Attend, check-in with, and support volunteers on Sunday mornings & at Children's Ministries activities. Lead the Children's Discipleship Ministry team (i.e. monthly meetings). Recruit and provide leadership development and training for CDM volunteers. Coordinate teams to plan special events such as Vacation Bible School (70-90 kids), midweek outreach events, holiday programs, and service projects. In cooperation with CDM, review, recommend, and develop Christ-centered curriculum and policies for children's classes and groups. Help to create and maintain a Children's Ministry environment that promotes learning and relationship building by being physically, emotionally, relationally, and spiritually safe for all children and volunteers. This includes coordinating background checks and security procedures for the children's ministry. Communicate CDM activities to the congregation and families (ie reports, bulletin, newsletters). Advocate and promote children's ministries in the community and seek ways to connect newcomers at FBC. Seek to partner with Youth and Adult Discipleship Ministries to achieve the overall mission of the church. Encourage summer church camp and other related opportunities for children/families. Coordinate childcare/children's activities for communion twice a year. Work with the Adult Discipleship Coordinator to resource and train parents to lead the spiritual development of their children. Engage in the Children's ministry, as well as empower others to serve according to their gifts/passions. Organizational Collaboration: The Children's Discipleship Coordinator is responsible to the Lead Pastor and attends weekly staff meetings, as well as prayer and planning sessions with the other discipleship coordinators. Qualifications: Must profess a devoted personal relationship with Jesus, exhibited in obedience to Biblical truth/values. Educational or experiential background in working with children and their families. Good verbal, written & technological communication skills, well-organized, and able to manage volunteers. Strong Biblical knowledge to guide age-appropriate spiritual growth and ensure Biblically accurate educational and character development curriculum and programming. Comfortable to work with, dependable, creative, and embraces a servant-leadership mentality. Interested applicants should submit resumes as soon as possible.

Starting Pay of $18.25 per hour! This is a full time position with benefits after 30 days of employment! ABC Industries is seeking qualified candidates to join our Lamination Team in our Winona Lake, Indiana plant! The ideal candidate will be able to load, operate, and adjust lamination equipment in the production of mining and industrial laminated fabrics. We also expect all employeees to participate in the ISO - Quality Assurance process by demonstrating an overall commitment to quality. Essential Functions 1.Performs the manufacturing of laminated fabrics by closely monitoring the application rate of adhesive and ensuring that temperature and pressure levels are maintained to meet quality parameters. 2.Inspect materials continuously throughout process to identify imperfections, which are both flagged and recorded accordingly. 3.Warehouses raw lamination materials and finished goods to be utilized by other departments and/or plant locations. 4.Physical requirements: Standing-Frequently; Sitting-Occasionally; Twisting-Frequently; Bending-Frequently; Squatting-Occasionally; Lifting up to 90 lbs.-Occasionally Lifting up to 50 lbs.-Frequently Duties and Responsibilities Ability to read pick list for production runs. Properly identifies film and scrim for production. Programs printer for printed materials. Identify & record quality deficient fabric. Monitor adhesive rate, temperature & pressure levels. Monitor laminator for cutter specification. Laydown rolls - operation; removal & installation. Emboss & bed roll removal & installation. Skid or package per specification. Performs trouble shooting of mechanical problems. Notifies leadman, foreman or supervisor of any major incidence of recurring equipment malfunction or poor quality raw materials or quality deficient production of fabrics. Assists with inventory counts as requested. Executes further tasks as requested by Management. Educational Requirements/Work Experience High School diploma or equivalent preferred. Basic math aptitude Knowledge and Skills Knowledge of tow motor operations Ability to read gauges, weight scales and tape measures Basic mechanical nature Ability to work on various machines Knowledge of safety rules Equipment Equipment utilized includes: laminators, tow motors, hoists, various scales, gauges, counters box knifes, and scissors. This Job Description is intended to describe the general content of, and requirements for, the performance of this position. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements.

Forest River, Inc., the Nation's largest manufacturer of Recreational Vehicles, Cargo Trailers, Transit Buses and Boats has an immediate opening. Responsibilities * Posting & Finalizing of Parts Orders * Order Confirmations * Filing * Maintaining Order Log * Parts Tracking * Freight Billing Qualifications * Basic Computer Knowledge * Microsoft Office - Excel Proficient * Must be able to read blue prints * Effective written and verbal communication skills Forest River offers a stable work environment that is fast paced. Our employees enjoy a highly competitive Wage and Benefit Package. We are looking for dedicated individuals with experience in the Industry as well as other Manufacturing Processes.

This position supports the work of the Y, a leading nonprofit, charitable organization committed to strengthening community through youth development, healthy living and social responsibility. The Summer Cabin Counselor at Camp Crosley YMCA maintains a supportive, positive atmosphere that welcomes and respects all individuals. The person in this position should have a desire to work with children, peers, and the outdoors. Counselors are directly responsible for the program leadership and well-being of campers, participants, and members under the supervision of the Overnight Camp Director and the Day Camp Director. Counselors role model for all campers choices that will help all young children to become successful, confident and caring as they mature. OUR CULTURE: Our mission and core values are brought to life by our culture. In the Y, we strive to live our cause of strengthening communities with purpose and intentionality every day. We are welcoming: we are open to all. We are a place where you can belong and become. We are genuine: we value you and embrace your individuality. We are hopeful: we believe in you and your potential to become a catalyst in the world. We are nurturing: we support you in your journey to develop your full potential. We are determined: above all else, we are on a relentless quest to make our community stronger beginning with you. ESSENTIAL FUNCTIONS: · Putting forth an honest effort, admitting mistakes. Your integrity is reflected in your honest choices. · Caring , compassionate and accountable to anyone that we serve. We strive to put the needs of others before our own. We strive to do what is best for the individual and the community. · Respect for all individuals that enter Camp Crosley YMCA. We provide opportunities for individuals of all backgrounds to experience a safe learning environment where everyone is encouraged to grow. · Be an active contributing member of the camp community and take responsibility for all the roles you play as a counselor, mentor, friend, and learner. · Be available to do whatever is needed to ensure the best possible week for all Crosley campers, members and participants from Sunday noon through Saturday at 10:00 am. · Live by and teach the Four Principles of the Camp Crosley: Honesty, Caring, Respect, and Responsibility . · Maintain the health and safety of campers, members, and participants. · Attend Mandatory staff training which will be anywhere from 6-10 days in length. · Assist the campers, members, and participants as they increase their understanding of their natural and social environments. · Ensure that all applicable YMCA, ACA (American Camp Association), local, state, and federal regulations are fulfilled. · Arrange special activities for groups of children. · Guide and direct campers, members, and participants toward their potential by creating a loving and supportive environment. · Actively participate in teaching and assisting in activities. · Be flexible and assist in any and all areas of Camp Crosley as needed and directed. · Provide program leadership by being prepared at all times to teach a variety of camp activities. · Recognize campers, members, and participants for their personal growth, exemplary behavior, and skill attainment. Effectively prepare end of session camper notes and submit in a timely fashion. LEADERSHIP COMPETENCY MODEL: OUR DISCIPLINES & COMPETENCIES ADVANCING OUR MISSION AND CAUSE provides visionary leadership to the organization and to ensure that all resources are mobilized to adapt to new challenges and needs in the community Change Leadership: Facilitates, co-creates, and implements equitable change for the good of the organization and/or community Engaging Community: Builds bridges with others in the community to ensure the Y's work is community-focused and welcoming of all, providing community benefit Philanthropy: Secures resources and support to advance the Y's work Volunteerism: Engages volunteers and promotes social responsibility at all levels of the organization BUILDING RELATIONSHIPS connect people to the Y's cause by developing inclusive relationships, partnerships and collaborations so that Ys can co-create solutions to pressing social needs Collaboration: Creates sustainable relationships within the Y and with other organizations in service to the community Communication & Influence: Listens and expresses self effectively and in a way that engages, inspires, and builds commitment to the Y's cause Inclusion: Values all people for their unique talents, and takes an active role in promoting practices that support diversity, inclusion, and global work, as well as cultural competence LEADING OPERATIONS ensure relevance, effectiveness, and sustainability of the organization so that we can continue to fulfill our promise to the community Critical Thinking & Decision Making: Makes informed decisions based on logic, data, and sound judgment Fiscal Management: Manages the Y's resources responsibly and sustains the Y's nonprofit business model Functional Expertise: Executes superior technical skills for the role Innovation: Creates and implements new and relevant approaches and activities that improve and expand the Y's work and impact in the community Program/Project Management: Ensures program or project goals are met and intended impact occurs DEVELOPING & INSPIRING PEOPLE support the holistic development of self and others so that everyone can embrace the Y's cause, sustain the Y's culture, and inspire others to take individual and collective action to further our impact Developing Self & Others: Develops self and supports others (e.g., staff, volunteers, members, program participants), both formally and informally, to achieve their highest potential Emotional Maturity : Demonstrates ability to understand and manage emotions effectively in all situations QUALIFICATIONS: CPR/AED and First Aid Certifications required within 30 days of hire. Child Abuse Prevention Training prior to first shift. Excellent interpersonal and problem-solving skills. Ability to relate effectively to diverse groups of people from all social and economic segments of the community Must be at least 18 years of age or older. WORK ENVIRONMENT & PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly moving and remains active throughout the duration of the day. The employee frequently is required stand and must be able to move around the work environment for long periods of time. The employee must occasionally lift and/or move up to 50 pounds. AGREEMENT: I have read and understand the above position description and accept the agreed upon salary and conditions indicated. I agree to fulfill all requiremenmts necessary for the performance of all job segments as described. I understand that peridoic performance reviews will become the basis for future merit increases, and that satisfactory performance is the sole condition of increased compensation. By performance and through behavior and interation with other employees, members, and guest, I will further the goals/objectives of Camp Crosley and the YMCA of Muncie and will make a positive contribution to the successful potential of the YMCA of Muncie.

Are you looking to join a dynamic team that provides its people with the tools to be successfull and opportunities to grow? Universal Logistics is a leading provider of customized transportation and logistics solutions, offering a comprehensive suite of services including transportation, value-added, intermodal, and specialized services utilized throughout entire supply chains. Universal has immediate career opportunities in your area. Apply today to become part of the Universal team! Universal Logistics is seeking warehouse workers and forklift operators for immediate openings in Roanoke. Now is a great time to join our growing team and move your career forward. Apply In Person, Monday - Friday 8:30 - 4PM 12808 Stonebridge Rd Roanoke, IN. 46783 ASK FOR JONATHAN Shifts and Pay Forklift: Starts at $19/hour, increases to $20 after 90 days 2nd Shift Available: 2pm - 10:30pm 3rd Shift: 10pm - 6:30am Warehouse: Starts at $18/hour, increases to $19 after 90 days 2nd Shift: 2pm - 10:30pm 3rd Shift: 10pm - 6:30am Benefits: -Union -Medical, Dental and Vision Insurance -Paid Time off / Paid Holidays -Annual Pay Increases Job duties include but not limited to: Placing parts in specific racks per customers build schedule Sit-down Forklift experience Ability to confidently stack Automotive racks.

Job Title: Tool Setter III Job Summary: The Tool Setter performs independent tool setups for CNC machines, verifies tool paths, and troubleshoots routine setup issues to support efficient production. This role requires a solid understanding of machining principles, tool geometry, and blueprint reading. The Tool Setter collaborates with machinists and engineers to ensure quality standards are met and contributes to process improvements. Responsibility: * Prepare and install cutting tools, holders, and fixtures based on job specifications. * Set up tools in CNC machines following setup sheets and engineering drawings. * Perform dry runs to verify tool paths and ensure correct setups. * Use precision measuring instruments to verify tool dimensions and alignment. * Collaborate with machinists, programmers, and engineers to support production. * Document tool setups, usage, and adjustments accurately. * Troubleshoot tooling-related setup issues and make necessary corrections. * Ensure tooling setups meet safety and quality standards. * Maintain organized tooling areas with proper labeling and storage. * Support continuous improvement initiatives related to tooling and machining. * Assist in developing and refining setup procedures for new jobs. * Train or support less experienced team members with tooling processes. * Coordinate with production scheduling to ensure tooling readiness for upcoming jobs. * Assist in first-piece inspections to validate tooling accuracy before full production. * Participate in root cause analysis (e.g., 5-Why) for tooling-related production issues. Academic/Educational Requirements: High school diploma or equivalent Required Skills/Experience: * 5+ years of advanced tooling, setup, and process optimization experience is highly preferred. * Strong understanding of machining principles and CNC operations. * Ability to read and interpret technical drawings and setup sheets. * Familiarity with tool geometry and cutting conditions. * Attention to detail and precision. * Good organizational and communication skills. What Linamar Has to Offer * Competitive Compensation * Employee Benefits package includes but not limited to, Drug, Dental & Vision etc. * 401k Program * Opportunities for career advancement. * Sustainability Counsel * Community based outreach supporting both local and global initiatives and charities. * Discounts for local vendors and events, including auto supplier discounts. About Us Linamar Corporation is a Canadian-founded global manufacturer, renowned for its advanced engineering and innovative product development across diverse industries and markets. Our journey started in 1966 under the visionary leadership of our founder, and today, we remain committed to cultivating a culture of innovation and collaboration. With access to state-of-the-art tools and resources, you'll have the opportunity to make a meaningful impact alongside a team of driven and passionate professionals. Join us and be part of a company where innovation, collaboration, and growth are at the heart of everything we do. Linamar Corporation is an equal opportunity employer and encourages diversity in the workplace without regard to any basis protected by applicable federal, state, or local law. Linamar Corporation encourages applications from all qualified individuals and will reasonably accommodate applicants throughout all stages of the recruitment and selection process upon request.

Job DescriptionJob Title: Robotics Technician (Cold Build / Commissioning) We are seeking skilled Robotics Technicians and Joining Specialists to support a large-scale cold build and commissioning project at a facility in Warsaw, Indiana. This project involves the integration and commissioning of Fanuc robots with multiple applications, including Material Handling (MH), Servo Spot Welding, Drawn Arc Stud Welding, MIG Welding, and Dispense systems. Key Responsibilities Support the cold build, setup, and integration of robotic systems and automated equipment. Assist with mechanical and electrical installation of tooling, robotics, and automation cells. Perform robot programming, troubleshooting, and validation on Fanuc platforms. Work with engineers and joining specialists to ensure welding and joining processes (Spot, MIG, Stud, Dispense) meet quality requirements. Conduct testing, debugging, and commissioning of robotic equipment prior to production handoff. Document work performed, update project records, and escalate technical issues as required. Adhere to all safety procedures and quality standards throughout project execution. Qualifications Hands-on experience in robotic integration, commissioning, or automation build support (Fanuc preferred). Background with at least one joining process: Servo Spot, MIG, Stud Welding, or Dispense systems (Joining Specialist roles require deeper expertise). Ability to interpret mechanical and electrical drawings. Strong troubleshooting skills with robotic systems, automation tooling, and controls. Ability to work in a project-based environment with flexibility on hours as needed. Powered by JazzHR YuhEnvWr2Y

Line of Business: Cement & WhitePay Range: $93,200.00 - $124,259.99 About Us Heidelberg Materials is one of the world's largest suppliers of building materials. Heidelberg Materials North America operates over 450 locations across the U.S. and Canada with approximately 9,000 employees. What You'll Be Doing Monitor and optimize cement operations to ensure efficient production and equipment reliability Collaborate with cross-functional teams to implement process improvements and troubleshoot production bottlenecks. Participate in developing plant capital projects for the cement plant including: equipment layout, process design, and cost analysis. Analyzing daily operations performance data to identify trends and recommend corrective action. Support and lead company safety and environmental initiatives while ensuring full compliance with MSHA, EPA, and other local regulatory standards. What Are We Looking For In-depth knowledge of cement manufacturing operations Strong problem-solving skills to solve technical problems and drive continuous improvement. Effective communication and teamwork abilities to coordinate across departments. Proficiency in data analysis and use of engineering tools and software. Commitment to safety, product quality, and operational excellence. Work Environment This role is based at a cement manufacturing facility and involves both office and field work. The environment includes exposure to dust, noise, and varying temperatures. Appropriate PPE is provided and required. What We Offer Competitive base salary $93,200- $115,00 and participation in our annual incentive plan 401(k) retirement savings plan with an automatic company contribution as well as matching contributions Highly competitive benefits programs, including: Medical, Dental, and Vision along with Prescription Drug Benefits Health Saving Savings Account (HSA), Health Reimbursement Account (HRA) and Flexible Spending Account (FSA) AD&D, Short- and Long-Term Disability Coverage as well as Basic Life Insurance Paid Bonding Leave, 15 days of Paid Vacation, 40 hours of Paid Sick Leave and 10 Paid Holidays Equal Opportunity Employer - Minority / Female / Veteran / Disabled

At Chase, we are passionate about creating memorable experiences for our clients and employees, making them feel welcomed, valued, and understood. We build lasting relationships by doing the right thing, exceeding expectations, and embracing diversity and inclusion. As a Branch Operations Lead in a Chase Branch, you'll be at the heart of our branch operations, working closely with the Branch Manager, branch employees, and our team of experts. Your role is crucial in ensuring that our clients' financial transactions are handled with precision and care, all while adhering to our policies, procedures, and regulatory requirements. A typical day will involve assisting clients with their transactions, but it doesn't stop there. You'll have the opportunity to make a real difference by introducing clients to self-service options that simplify their banking experience and by building lasting relationships with them. Throughout the week, you'll also dedicate time to reviewing branch operations and keeping the branch team informed about the latest policies and procedures. Your leadership will ensure that our branch not only meets but exceeds control expectations, setting a positive tone for everyone who walks through our doors. Job responsibilities Collaborate with the Branch Manager to create a welcoming and vibrant atmosphere in the branch, ensuring every client enjoys an exceptional experience and feels part of a dynamic community. Greet clients warmly as they enter the branch, making them feel valued and appreciated. Demonstrate genuine care and concern during interactions, assisting with transactions, managing lobby flow, and scheduling meetings to build trusted relationships. Engage clients with clear, polite communication to understand and help them effectively. Anticipate their needs while checking them into the waiting queue, ensuring a smooth visit. Lead branch operations, including managing cash devices like the cash vault and ATM. Resolve any client issues quickly and effectively, paying attention to detail and striving for consistency while adhering to all bank policies and procedures. Introduce clients to our friendly branch team, who collaborate to deliver seamless service with care and sincerity. Work together to build lasting relationships and assist with any specialized financial needs, elevating the client experience. Simplify clients' banking experience by sharing self-service options, allowing them to access their accounts anytime, day or night. Work closely with the Branch Manager to support all aspects of branch operations, including maintaining high standards for loss control, compliance, and audits, ensuring the branch operates smoothly and securely. Required qualifications, capabilities, and skills You take pride in adhering to policies, procedures, and regulatory banking requirements, ensuring everything runs smoothly and efficiently. You are committed to maintaining a keen eye for detail and staying organized, which helps you juggle multiple tasks effectively. You are proud of your leadership skills and operational proficiency, ensuring transaction accuracy while thriving in a collaborative team environment. You have a strong passion for educating the branch team and partners, helping them stay connected and informed. You excel at building meaningful connections and engaging with clients, always ready to educate them and refer them to our team of experts when needed. You have 1+ years of retail banking experience. You have a high school degree, GED, or foreign equivalent. You have the ability to work branch hours including weekends and evenings. Preferred qualifications, capabilities, and skills You have 6+ months of Associate Banker (Teller) experience. You have a college degree or military equivalent. Training and Travel Requirement You'll successfully complete our Branch Operations Lead Training Program before being considered for placement as a Branch Operations Lead. You'll need to be able to travel as required for in-person training and meetings.

One Resource Group Roanoke, IN About One Resource Group One Resource Group, an Integrity company headquartered in Roanoke, Indiana, is one of the most prominent brokerage general agencies in the fully underwritten and advanced planning markets. With a team of highly skilled and motivated specialists, ORG is one of the fastest growing BGAs in the country and continues to make the brokerage experience better for agents and advisors. ORG offers a vast range of insurance products in the life insurance, annuity, disability income and long-term care space. With their state-of-the-art technology, experienced case design, case management, advanced markets and experienced underwriting, ORG continues to be a leader in the industry. Over almost 20 years, ORG has served more than 190,000 families through their network of over 80,000 agents. For more information, visit **************** Job Summary The Disability Insurance Specialist is responsible for the disability insurance sales for the company. This position is tasked with working with independent insurance agents to help them place business, identify opportunities, better understand the product line and design cases to meet client needs. The position is split between inbound and outbound sales activities Primary Responsibilities: Assist independent insurance agents with product selection, carrier selection, application questions, case design and underwriting. Conduct training sessions and webinars for independent insurance agents and internal sales team on product line. Make outbound sales efforts to promote sales of disability insurance including, but not limited to phone calls and emails to existing and prospective ORG agents. Maintain relationship with insurance carriers that offer products in the disability insurance product line. Cross-sell other product lines offered by ORG with agents currently selling disability insurance through ORG. Maintain a working knowledge of the state of the industry as it relates to disability insurance. Work with other members of the sales team to create a positive experience for ORG agents. Average of 100 illustrations per week Average of 125 outbound sales calls per week Primary Skills & Requirements: Bachelor's Degree or equivalent certification preferred. 1+ years of disability insurance sales or customer service experience preferred. Must be effective in both verbal and written communication. Must be able to work well in a team environment Benefits Available Medical/Dental/Vision Insurance 401(k) Retirement Plan Paid Holidays PTO Community Service PTO FSA/HSA Life Insurance Short-Term and Long-Term Disability About Integrity Integrity is one of the nation's leading independent distributors of life, health and wealth insurance products. With a strong insurtech focus, we embrace a broad and innovative approach to serving agents and clients alike. Integrity is driven by a singular purpose: to help people protect their life, health and wealth so they can prepare for the good days ahead. Integrity offers you the opportunity to start a career in a family-like environment that is rewarding and cutting edge. Why? Because we put our people first! At Integrity, you can start a new career path at company you'll love, and we'll love you back. We're proud of the work we do and the culture we've built, where we celebrate your hard work and support you daily. Joining us means being part of a hyper-growth company with tons of professional opportunities for you to accelerate your career. Integrity offers our people a competitive compensation package, including benefits that make work more fun and give you and your family peace of mind. Headquartered in Dallas, Texas, Integrity is committed to meeting Americans wherever they are - in person, over the phone or online. Integrity's employees support hundreds of thousands of independent agents who serve the needs of millions of clients nationwide. For more information, visit Integrity.com. Integrity, LLC is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, national origin, disability, veteran status, or any other characteristic protected by federal, state, or local law. In addition, Integrity, LLC will provide reasonable accommodations for qualified individuals with disabilities.

The Aerial Lift Trimmer is responsible for trimming, pruning, and removing trees with the aid of a bucket truck or other equipment or tools. 2-3 years previous professional experience in line clearance operating an aerial lift trimmer or Jarraff is required. Meet up point is in Warren, IN and transportation is provided to Huntington. Driver's license is required. There is opportunity for overtime and we offer paid holidays and additional paid time off. Health insurance, as well as vision and dental is offered to all employees, as well as retirement. We also offer training for our employees to help them learn new skills for promotion. ESSENTIAL FUNCTIONS Always follow and help enforce safe practices and rules Assist in preparing truck and materials needed for each day at General Foreperson's direction Perform professional tree maintenance activities as directed by General Foreperson Clear and trim trees and brush away from utility lines; remove branches and tree material Clean up and dispose of all debris Maintain and keep track of all tools and equipment used in daily operations Constantly observe and practice climbing and tree maintenance skills in a continued effort to improve your own professional skills Be ready and willing to assist other crew members in all aspects of daily activities Safeguard employees and public from hazards in and around the work area by enforcing safe job practices, keeping work area clean and orderly, and staying in frequent voice communication with co-workers Perform duties for storm work as needed SUPERVISORY RESPONSIBILITIES Aerial Lift Trimmers have no direct reports. EXPERIENCE REQUIREMENTS Prior experience in electric utility vegetation management, construction, logging, landscaping, mechanical, or military industries preferred; previous aerial lift experience preferred EDUCATION REQUIREMENTS High School diploma or education equivalent preferred KNOWLEDGE, SKILLS, AND ABILITIES Must be able to demonstrate a working knowledge of all knots, ropes and rigging devices used in tree trimming and removal operations. Must be able to identify tree species Must be familiar with electrical hazards and appropriate operating procedures when in proximity to electrical conductors and aerial techniques in the event of an emergency aloft Must be able to work and maneuver at considerable heights under varying and adverse weather conditions Must possess physical strength and agility, good balance, good depth perception and the ability to hear verbal instructions from a distance. Must be able to obtain and maintain first-aid certification and CPR Must be able to administer and implement emergency rescue techniques, including tree rescue and all applicable first aid techniques Must be able to quickly remove yourself from a potential danger area Must be able to wear necessary personal protective equipment (PPE) Must be able to travel out of town for storm restoration work when needed Work authorization requirements: Must meet I-9 requirements. Affirmative Action/EEO statement: Xylem Tree Experts and Kendall Vegetation Services provide equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities required of the employee for this job. Duties, obligations, and activities may change at any time, with or without notice. Benefits Offered: This is a full-time position that offers health insurance benefits for medical, vision, and dental, as well as the option for enrollment in a 401K

2nd & 3rd Shift - (training on 1st shift for 1-2 weeks max) Must be able to work all shifts Hours:1st: 7 am - 3 pm2nd: 3 pm - 11 pm3rd: 11 pm - 7 am M-F$16. 65/HR Primary Purpose: Pull, Pick, Feed, Return to Stock and Package product in support of Production operations Job Duties/Requirements: • Prepare, stage, Batch carts to correct locations. • Accurately pick and return stock. • Properly notify departments of restock requirements. • Use computer and email • Maintain 5S and a safe work environment • Perform Quality checks as directed by the supervisor • Perform other duties as assigned by supervisor • Ability to prioritize in an ever-changing environment • Ability to work independent and as part of a team • Ability to work overtime or any shift as required • Assist in removing product and packaging from production equipment • Understand and use personal protective equipment (PPE) Education Requirements: • High School Diploma/GED or equivalent #Huntington

Job Description Imagine going to work knowing that what you do each day positively affects the lives of the people in your community. While working at YMCA Camp Potawotami, you'll discover more than a job-you'll enjoy making genuine connections and unforgettable experiences in the lives of those around you. YMCA Camp Potawotami has provided friendship, fun, and a character-building camping experience in a beautiful, safe environment for over 100 years. Located about 40 miles north of Fort Wayne on the shores of Blackman Lake, Camp Potawotami has over 210 acres of woodlands, meadows, wetlands, and hiking trails. Why you'll love YMCA Camp Potawotami Personal Development: You'll have many opportunities for free training and certifications, as well as opportunities to advance and potentially find a long-term career. Housing & Meals: Required to live on-site, and food is provided. Fulfillment: Experience a flexible schedule while working for a company that cares about you and is actively involved in our community! YMCA Membership: As a part-time staff member, you will receive a free individual membership, or 65% off family membership, 50% discounted programs at Y branches for you and your household, and a 40% discount for you and your family at camp. Responsibilities Ensure that each camper has the social, emotional, and physical resources to have an equitable summer camp experience. Organize & distributes necessary camper information to ensure success of both cabin leaders and campers. Dietary needs to Food Service Director Medical and Behavior Needs to the Program Director and authorized staff. Assign Cabin Assignments with weekly leaders and co-leaders Review and approve Parent Cards written by staff to their camper's parents. Facilitate biweekly camper surveys, review with the Program Director, and address any issues or concerns with the help of the Head Counselors. Greet and prepare CITs and Nurses on Check In Day Prep Facilitate Evening Rounds or Documented Daily Check-ins with the head counselors, at each cabin group to discover and support any camper or staff issues. Ensure that afternoon and evening snack are ready and served on time with dietary restrictions are met. Liaison with International Staff. Requirements Candidates must be committed to contributing to the mission, culture, and values of YMCA Camp Potawotami and the YMCA of Greater Fort Wayne as well as… Must be at least 21 years of age. Must have a high school diploma or equivalent. Must have previous leadership and/or staff supervision experience. Must have experience working with youth in a camp or outdoor setting. Customer Service experience preferred. Excellent communication, supervisory, and organizational skills. Excellent human relation skills and enthusiasm. Basic math skills and demonstrated recordkeeping proficiency. An elevated level of organization, flexibility, and ability to handle difficult situations effectively. Successfully complete within 60 days of hire: CPR/First Aid/O2 Certification, Bloodborne Pathogen training, Child Abuse Prevention training, and all other required training as specified by your supervisor. Commitment Details Commitment: May 22, 2026- August 7, 2026 Starting at $83/ per day (Sunday 11:00am - Friday 8:00pm weekly sessions) Room & Board Provided Location: YMCA Camp Potawotami is located on beautiful Blackman Lake in Northeast Indiana; 7255 East 700 South, Wolcottville, IN 46795

Job Title Business Unit Department Reports To Product Design Engineer Chore-Time Engineering Engineering Manager BU Location BU Acceptance Approved By: Date Approved Milford, IN Overall Purpose: Why the Job Exists & What You Will Do: As the Product Design Engineer, you will design, develop, and create innovative poultry components and equipment to meet customer expectations and business goals. Essential Job Functions & Expected Outcomes: Your Accountabilities in the Role Product Design & Development: 100% of the Job Communicates and collaborates with customers, dealers, and network to establish product needs within the industry, as well as research competitive product lines, to create new or enhanced products that will drive business goals. Manages the design, layout, specifications, and testing of new or enhanced products, work with sheet metal and plastics, work with internal and external manufacturing to ensure the quality, timing, resources, and costs meet the overall expected results of the project. Leads, collaborates, and communicates with project team members to direct the detailed product design and implementation, ensuring a best practice approach for optimal implementation results. Travels to assist with product installments, meetings, and trade shows through the U.S. and Internationally to ensure the Voice of the Customer is integrated in every part of the processes. The job criteria may include other duties, responsibilities and activities, which may change or be assigned at any item with or without notice. Position Requirements: Education: Bachelor's Degree in Mechanical or Agricultural Engineering, or a related field; will also consider an equivalent combination of education and experience. Experience: 2+ years of experience with plastic part design, ventilation, fluid mechanics, or product design within an agricultural or farming environment preferred; will consider an entry level person with strong aptitude for the role preferably with related experience/understanding of poultry husbandry and housing. Certification(s): N/A Functional Skills: Strong foundational understanding of engineering and mechanical principles to design parts that include motors, mechanical power components, sheet metal parts, injection mold and extruded plastic parts, material flow, air movement/cooling systems, and movement of material (i.e. feed, eggs, and waste). The position requires strong analytical, problem-solving, conceptual, project management, time management, and organizational skills to take ideas, design a product, and execute to meet market needs. A familiarity with CE European product standards would be a plus. Technology Aptitude/Skills: Strong skill set in AutoCAD/3D CAD programming (Inventor/Vault); ERP system experience is a plus (Oracle preferred); Advanced Microsoft Office Skills (Word, Excel, Teams) required as well. Language Skills: Excellent verbal and written communication skills; will present ideas and outlines to management team, vendors, and customers. Leadership/Behaviors: Ability to work with an experienced team, who is collaborative and supportive. Can learn quickly to move past barriers and be a strong influencer to get things done to own the role. Culture Match: Excellent abstract thinking; creative, conceptual thinker with a solid common-sense approach to create solutions and push through obstacles. High integrity, Dependability, who can handle confidential information well. Will also be Customer-Focused, Cost Conscious, Strives for Excellence, and can thrive in a fast-paced environment. Will also be able to visit farms and interact with customers in a professional, well-received way. Core Values that Apply to All Positions: Integrity in all things Customers are why we exist Profitability is a must Excellence in all we do People make the difference Equipment Used: This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and similar machines. This role will often use laboratory testing equipment, measuring instruments, waterjet, 3d printer, and other mechanical equipment to produce prototype and/or test equipment. Physical Requirements to Perform Essential Functions: Ability to operate a motor vehicle as needed for travel in the role Ability to sit at desk for 5+ hours per day Ability to operate keyboard and view computer screen for majority of day 6-7 hours Ability to write ideas/information in a logical flow for 5+ hours per day Ability to read and respond on an on-going basis daily due to nature of the work, throughout the day Ability to read, write and speak English fluently Ability to communicate with others via phone, in-person, and computer on-going Ability to listen to customers, problem-solve, and respond accordingly Ability to sit, stand, bend, reach, kneel, squat, twist, push, pull, walk, stoop, crouch, and carry items frequently Lifting up to 15 lbs. sporadically Environmental Conditions & Travel: The employee is primarily exposed to a normal office environment with moderate noise. The employee is occasionally required to wear suitable Personal Protective Equipment while visiting manufacturing departments and client locations. Testing and engineering lab environment with machines and equipment related to prototyping and testing. This position may be occasionally exposed to animals, dust, and dirt when visiting client locations. This position may face inclement weather conditions when traveling. Travel: 10 - 20% travel is required (Domestic & International) I have reviewed and understand the above . I understand that the company may change this as it deems necessary and at its discretion. I also understand that a copy of this job description is available to me through request to my manager or Human Resources department. Employee Name (Print) Employee Signature Date

Schedule: 1st Shift: 6:30am-3pm Monday thru Friday --------------------------------------------------------------------- HELP BUILD A WORKPLACE THAT FEELS SAFE, SUPPORTED, AND INSPIRED. About the Role POLYWOOD is looking for a Maintenance Technician who thrives in a hands-on, team-oriented environment and takes pride in keeping equipment, facilities, and people safe. This role is perfect for someone who enjoys problem-solving, values preventive maintenance, and wants to grow their technical skills while supporting a strong safety culture. What You'll Do: Diagnose and repair electrical, mechanical, and pneumatic issues to minimize downtime Perform routine maintenance including cleaning, lubricating, and replacing belts, pulleys, gears, and other machine components Complete preventive maintenance tasks to keep equipment running efficiently and proactively address potential issues Troubleshoot and repair CNC machinery, heating elements, pneumatic tools, motors, and temperature controllers Perform welding, plumbing, and electrical work including 120-480 volt single- and three-phase systems Support facility maintenance including painting, patching, and general building repairs Follow lockout/tagout procedures and all safety standards Partner with leadership to identify improvement opportunities and source cost-effective maintenance supplies --------------------------------------------------------------------- What You Bring: 7 or more years of industrial or manufacturing maintenance experience preferred Advanced experience troubleshooting PLCs, electrical systems, or both Strong understanding of industrial electrical systems, control panels, and schematics Experience working with PLC platforms and related components such as VFDs, HMIs, sensors, and safety circuits Proven ability to diagnose root causes of complex equipment failures Working knowledge of lockout/tagout and industrial safety programs High attention to detail with a strong commitment to safety, quality, and reliability Self-directed, dependable, and comfortable working independently during off-shift hours Ability to pass a background check --------------------------------------------------------------------- Bonus Skills: Experience working with CNC machinery or automated equipment PLC programming, modifications, or optimization experience Electrical certifications or journeyman-level training --------------------------------------------------------------------- Why You'll Love Working With Us: Valued Contribution: Your work directly supports safe, efficient, and reliable operations Growth Opportunities: Gain exposure to new equipment, technologies, and internal career paths Team Environment: Join a collaborative maintenance team built on trust, accountability, and continuous improvement Purpose Driven Work: Help create a workplace where safety, reliability, and people come first --------------------------------------------------------------------- About Us At POLYWOOD , we design and build outdoor furniture that brings people together and stands the test of time. We do this using sustainable materials like our genuine POLYWOOD lumber made from recycled plastics. But the strength of our products starts with the strength of our people. This role plays an important part in supporting the teams who build, ship, and innovate our furniture every day. By maintaining safe, reliable equipment and facilities, you help ensure our employees feel protected, supported, and empowered to do their best work in an environment where safety and people come first. Check out this video - Genuine POLYWOOD If this sounds like the kind of impact you want to make, we'd love to meet you. Apply today. --------------------------------------------------------------------- POLYWOOD is an equal opportunity employer. POLYWOOD evaluates qualified applicants without regard to characteristics protected by federal, state, or local laws. --------------------------------------------------------------------- Maintenance, Maintenance Tech, Maintenance Technician, Manufacturing Maintenance, Facilities & Maintenance Technician , Maintenance Mechanic , Senior Maintenance Technician , Industrial Maintenance Technician

Essential Duties and Responsibilities include the following. Other duties may be assigned: Program, set-up, and operate a variety of machine tools including CNC lathes, CNC mills, Wire EDM, and various manual (mill, lathe, surface grinder) equipment. Identify materials and tooling required to produce prototype parts, tooling, fixtures, gages, etc. Follow all documented Work closely with engineering to design and develop fixtures, gauges Perform other duties as required/assigned. Core Competencies: Detail oriented, strong analytical, numerical, planning and reasoning abilities Swiss Turn Lathe CNC experience/programming is a 5-axis milling experience/programming is a plus read, analyze and interpret complex manufacturing documents Strong Manufacturing background (CNC/Metal cutting) Excellent organizational and communications Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to read, analyze, and interpret the complex manufacturing documents and manufacture parts/fixtures start to finish. Working knowledge of GD&T. Minimum 4 years of programming experience with lathes, mills, and/or wire Strong attention to detail. Education and/or Experience: Equivalent to high school education or related experience or training; or equivalent combination of education and A minimum 4 years of programming experience with lathes, mills, and/or wire EDM. Language Skills: Ability to read and comprehend simple instructions, short correspondence, and Ability to write simple correspondence. Ability to effectively present information in one-on one and small group situations to customers, clients, and other employees of the organization. Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral Ability to deal with problems involving a few concrete variables in standardized situations. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential While performing the duties of this Job, the employee is frequently required to stand and walk. The employee is occasionally required to use hands to finger, handle, or feel and reach with hands and arms. The employee must occasionally lift and/or move up to 30 pounds. Specific vision abilities required by this job include close vision, distance vision, depth perception and ability to adjust focus. Work Environment: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential Work near moving mechanical While performing the duties of this Job, the employee is occasionally exposed to moving mechanical parts. The noise level in the work environment is usually moderate to loud.