Project engineer jobs in Middletown, RI

Job Role: Senior Project Engineer Duration: Full Time About the job We are seeking a mechanical engineer to work with our team of dedicated engineers in the field of building energy efficiency. Successful candidate shall have 2-5 years post academic experience in building energy auditing (ASHRAE Level I and/ or ASHRAE Level II) and HVAC design and/ or commissioning. Experience with eQUEST or Energy Plus building energy simulation programs is a plus. Candidate must have good oral and written communication skills. Responsibilities include performing energy audits and developing new strategies for enhancing building performance.

Civil Engineer (PE / EIT / Senior-Level) Location: Massachusetts preferred; New England region • Full-Time We're growing and seeking a Civil Engineer at any level-PE, EIT, or experienced non-licensed-to support a variety of civil and land development projects. Responsibilities Design grading, drainage, utilities, stormwater systems, and site layouts Prepare plans, calculations, and project documents Coordinate with clients, contractors, and permitting agencies PE-level candidates may lead work and stamp drawings Candidate Profiles PE: MA license preferred; out-of-state PEs welcome; relocation support possible EIT: 2+ years civil/site experience Experienced Non-PE: Strong civil/site project experience comparable to an EIT/PE Preferred Skills AutoCAD Civil 3D, stormwater design, land development, grading, septic systems, and local/state permitting. Strong communication and problem-solving abilities. Licensing Flexibility Candidates licensed in CT, NH, or ME are encouraged to apply. Multiple New England office locations offer flexible work options.

We have an outstanding opportunity for an experienced Project Manager to join our dynamic firm. The Project Manager reports directly to the VP | Project Executive. The Project Manager is responsible for the overall construction management and financial cost control for our construction projects. Responsible for executing multiple projects concurrently on time and within budget. Commonwealth Building is a Commercial General Contracting and Construction Management firm serving the greater New England area. Commonwealth Building specializes in ground-up construction, tenant improvements, and tenant-occupied renovations in the Retail, Restaurant, Corporate, and Commercial market sectors. We are seeking a candidate who possesses strong self-motivation, a solid construction background, and effective interpersonal, communication, and project management skills. Primary Duties Pre-Construction Phase: Thoroughly review and comprehension of the plans, specifications, and construction documents. Identify any design deficiencies, impractical details, and possible code violations shown on the construction documents. Attend and assist the estimating team for the bid review meeting before the bid submittal. Download meeting with the Estimating team to review all bid and estimating documentation after project award. Preconstruction meeting with the superintendent to review the project scope, team contacts, schedule, documentation, project expectations, logistics, safety plan, quality control plan, etc. Produce agenda for pre-construction meeting with the Superintendent, Client, Building Owner rep, design team, contractors, vendors, etc., Produce meeting minutes upon completion. Plan, create, and implement a Critical Path Schedule. Plan and review the Construction Program with the Superintendent, including quality control procedures, safety and security practices, Staging areas, temporary utilities, equipment, and manpower. Negotiate contracts with contractors and external vendors to ensure financial buy-out goals are being met. Procure all materials not included in subcontractor's scope. Prepare take-offs as required to procure materials. Obtain permits and licenses from appropriate authorities. Procure any temp facilities and or equipment required for the project. Collaborate with the architects, engineers, client reps, and field team to ensure project success. Construction Phase: Plan, communicate, and coordinate daily with the project superintendent to ensure the project goals are being met. Responsible for effective execution of construction project work on site, through planning, coordination, and control of construction resources and activities from inception to project close-out. Manage all staff assigned to the project and foster a strong working relationship with the entire project team. Create, manage, and distribute all submittals and shop drawings to ensure QA/QC guidelines and deadlines are being met. Responsible for ensuring that all materials of construction and methods of construction conform to company, industry, and regulatory standards, specifications, and requirements. Maintain and manage the critical path schedule throughout the life cycle of the project. Establish a weekly meeting agenda and document meeting minutes to review project status and formulate action items. Prepare post-bid RFP's required for vendor and contractor services, as well as manage the contractor and vendor selection process. Act as the primary point of contact with the client throughout the duration of the project. Develops and maintains long-term industry relationships, including client relationships and account development. Communicate with the customer regularly and ensure their expectations are being met. Oversees the establishment of the Project Execution Plan, Health and Safety Plan, Quality Assurance/Quality Control Plan, and other documents as required. Identifies risks to the project and works with the project team to mitigate risks. Create the schedule of values, prepare draft and approved applications for payments, and supporting documentation required by the contract for billing. Work with Accounts Receivable to ensure timely customer payment. Work with Accounts Payable to ensure that all contractors and vendors are being paid promptly. Prepare all subcontracts, purchase orders, sub change orders, and loose invoicing. Responsible for project cost control management and ensuring our financial goals are being met. Prepare scopes of work and project requirements for all contracts, purchase orders, and change orders. Prepare and manage all Prime Change Orders. Provide all required estimating and supporting documents required to submit and execute the Prime Change Order. Review and approve subcontractor and vendor invoices. Approve for payment or negotiate changes. Ensure that the project meets or exceeds goals established in collaboration with the client. Manage and track project budget/job costing. Submit required reporting monthly. Thoroughly review and comprehension of the prime contract. Work with the project Superintendent and the VP| General Superintendent to provide self-performed labor requests and forecasts. Thoroughly review and comprehend all addenda, SKs, and directives. Distribute and implement as required. Provide problem-solving solutions for technical, financial, communication, and scheduling issues that arise throughout the life cycle of the project. Work closely with the project superintendent to ensure all government and 3rdparty inspections are being met. Work closely with the project superintendent to review and manage productivity to ensure the timely completion of all tasks. Review the project superintendent's two-week schedule before distribution for accuracy and milestone forecasting. Work closely with the project superintendent to ensure that the subcontractors and vendors are fully executing their contracted scope of work in accordance with all construction documents (i.e., plans, specs, submittals, shops, etc.). Work closely with the project superintendent to perform quality control inspections throughout the entire construction process to ensure compliance of the construction documents and CBI's expectations. Ensure that all subcontractors, vendors, and self-perform labor have corrected all deficiencies on time. Serve as a positive role model and encourage professional behavior. Post Construction Phase: Work closely with the project superintendent to ensure all punch lists are completed on time. Prepare, manage, and execute all closeout requirements listed in the contract/construction documents (i.e., Owner Manuals, executed punch list, permits, warranties, certificate of occupancy, record drawings, test reports, etc.). Analyze and produce final budget/job cost reporting. Download with the estimating team all job cost reporting, any issues with bid vs. actual cost, and any solutions to improve accuracy and efficiencies of the bid for similar projects in the future. Work closely with the superintendent to ensure that all owner training is complete, utilities are transferred, and temp facilities are cancelled and removed. Produce final application for payment and all supporting documents required by contract. Work closely with Accounts Receivable to ensure timely payment. Work closely with Accounts Payable to ensure that all contractors and vendors are paid in full and that we obtain all supporting documents from them as required by contract. Procore requirements: Produce a schedule of values for entry into Sage and ERP into Procore. Enter all commitments (contracts, purchase orders, and contractor change orders). Includes schedule of values, scopes of work, project description, supporting documents, and exclusions. Enter all Prime Contract Change Orders. Includes change events, potential change orders, and prime contract change orders. Includes scope of work, supporting documents, schedule of values, scheduling impact, and descriptions. Enter RFI (Request for Information) and distribute. Includes question description, coding, reference to spec and or drawings, etc. Includes management of deadlines required to stay on schedule. Produce RFI logs for weekly meetings. Enter all Submittals and Shop Drawings. Includes all general information, due dates, received dates, supporting documents, etc. Includes management of deadlines required to stay on schedule. Produce submittal log for weekly meetings. Review budget weekly (minimum) to ensure our financial goals are being met. Adjust the forecast accordingly. Make budget adjustments to ensure proper cost coding. Produce meeting agenda and document meeting minutes. Includes agenda items, assignments, due dates, attendees, and other relevant details. Upload project schedule and keep up to date. Upload addendums, SK's and directives. Mark up drawings with any field deficiencies and or changes. Manage and document the project punch-list. Qualifications: Bachelor's Degree in Construction Management, Engineering, or related field. (Preferred). 3+ years of commercial construction project management experience. (Required). Proficient in Microsoft Office suite, MS Project, and Procore. Ability to motivate and lead a team Strong work ethic and the ability to work in a fast-paced environment Great attitude with a strong client-centric focus. Benefits: 401(k) 401(k) matching Dental insurance Health insurance Health savings account Life insurance Paid time off Referral program Vision insurance

We are seeking a proactive and detail-oriented Manager to lead complex infrastructure projects including site work, utilities, excavation, roadway construction and various types of Earth Support. The ideal candidate will have a strong background in managing multiple jobs across trades, pricing change orders, interpreting drawings, and overseeing all aspects of project execution from preconstruction through closeout. Key Responsibilities Collaborate with the Estimating department on buyouts of material suppliers and subcontractors Review and understand all project documents drawings and specifications. Attend Project meetings with Clients, General Contractors subcontractors, and internal teams. Submit and track all submittals and ensure timely delivery and approval. Prepare and submit monthly requisitions. Collaborate with accounting to approve and sign all incoming invoices. Maintain and update project schedules monthly using Microsoft Project and Primavera. Ensure all jobs remain on schedule. Ensure the safety department is fully integrated into each job site and that safety protocols are followed. Perform detailed job costing and maintain accurate financial tracking throughout the project lifecycle. Software Proficiency: Utilize construction management software including: Microsoft Project, Primavera P6, Procore, Sage 300 CRE, Bluebeam & Microsoft Office Suite Additional Duties Coordinate with field teams and subcontractors to ensure quality and compliance. Manage RFIs, subcontracts, and purchase orders. Conduct site visits and inspections to monitor progress and safety. Provide leadership and mentorship to junior staff and field personnel. Ensure compliance with local, state, and federal regulations. Perform other duties as assigned to support project success. Qualifications Bachelor's degree in construction management, Civil Engineering, or related field preferred. Minimum 5 years of experience in heavy civil construction project management. Strong understanding of site development, excavation, utilities, and infrastructure. Proven ability to manage budgets, schedules, and documentation. Excellent communication, leadership, and organizational skills. OSHA certification and familiarity with safety protocols preferred.

Established nearly two centuries ago, FM is a leading mutual insurance company whose capital, scientific research capability and engineering expertise are solely dedicated to property risk management and the resilience of its policyholder-owners. These owners, who share the belief that the majority of property loss is preventable, represent many of the world's largest organizations, including one of every four Fortune 500 companies. They work with FM to better understand the hazards that can impact their business continuity to make cost-effective risk management decisions, combining property loss prevention with insurance protection. Are you a forward-thinking Electrical Engineer with a thirst for innovation and a knack for solving complex problems? Do you want to be at the forefront of cutting-edge loss prevention research in Power Generation, Equipment and Renewable Science? If so, we have the perfect opportunity for you! Join our dynamic team to delve into the risks associated with Industrial & Commercial Power Generation (including solar, wind, battery storage and electrical power systems). Our multidisciplinary team leverages expertise in mechanical, electrical, structural, and rotating equipment; industrial control systems; reliability; and process engineering to pioneer a comprehensive understanding of current risks and the technologies of tomorrow. Position Overview: As a pivotal member of our team, you will engage in groundbreaking projects under the guidance of a Team Leader/Area Manager. Your role will include planning, conducting, and directing the development and evaluation of scientific and engineering projects within the electrical engineering discipline, aimed at increasing technical knowledge and providing innovative solutions. Your focus will be on engineering risk & reliability; responsibilities (with electrical discipline focus) include evaluation of new and existing designs, emerging technologies, and safety/protection systems; development of advanced inspection, maintenance and monitoring techniques and practices; performing root cause analyses of industrial loss events; and developing/providing guidance to address loss concerns of industry. Key Responsibilities: Innovate and Solve: Develop engineering solutions, evaluate new technologies, and advance scientific knowledge in electrical engineering. Communicate and Collaborate: Serve as a technical communicator between the company, its customers, and external organizations. Lead and Market: Develop and market proposals for research development supported by internal and external sources. Learn and Expand: Progressively develop competence in various engineering or scientific techniques to meet company objectives. Report and Inform: Keep the Team Leader/Area Manager informed of project status and progress, addressing any significant matters affecting objectives. Education: PhD in electrical engineering OR MS + 5 years of related experience 5+ years of design and/or operation & maintenance experience on electrical/power generation (including renewables) equipment (such as generators, transformers, wind, solar, and battery energy storage). Knowledge of relevant standards and guidelines is necessary. Exposure to power electronics, electrical system studies and modeling is desired. Engineering or research in special area of electrical engineering commanding industry recognition or leading to publication as author of original work in peer review journal, is a plus. Skills: Interested in continuous learning and expanding abilities and skills while undertaking challenging problems. State of the art knowledge in special area of electrical engineering including experience with related areas of analysis and experimental techniques. Proficient skills to analyze and resolve complex problems and the ability to work both independently and collaboratively in a dynamic multi-disciplined team environment. Superior written and communication skills for report writing and communication of technical concepts to internal and external clients. Demonstrated project management skills including technical, financial, and personnel management for a significant project. Familiarity with office tools for business and technical communication. Compensation, Grade, and Job Title will be determined based on qualifications, experience, and technical skillset. The position is eligible to participate in FM's comprehensive Total Rewards program that includes an incentive plan, generous health and well-being programs, a 401(k) and pension plan, career development opportunities, tuition reimbursement, flexible work, paid time off allowances and much more. FM is an Equal Opportunity Employer and is committed to attracting, developing, and retaining a diverse workforce. #LI-TA1

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description SummaryOf Position: A Senior Research Engineer for the DVT Preventionbusiness will substantially contribute to the design and development andsustaining engineering activities of Intermittent pneumatic compression devicesused to prevent Deep Vein Thrombosis, a leading cause of morbidity inhospitals. These activities will cover all phases of the product life cyclefrom concept through end of life. The individual in this position will becalled upon to work in a dynamic team environment lead projects, contribute todesign decisions and execute requirements across a wide variety of projects.The devices are electro-mechanical pneumatic systems that control the inflationof pneumatic compression garments used in the prevention of Deep VeinThrombosis (DVT). The ability to execute hardware electronic designs withembedded software is a key requirement. Attention to detail and workingknowledge of regulations for the medical device industry are essential. Theengineer must be able to work in a team environment and be able to communicateclearly across all disciplines including Quality Assurance, Regulatory Affairs,Manufacturing, Marketing, Clinical Affairs and outside design partners andregulatory agencies. rootcause analysis Qualifications Essential Functions: • Contribute to the development and maintenance of DVT prevention systems. • Write and review requirements specifications relating to both electronics and software. • Critically evaluate hardware and software design implementations and challenge and confirm design decisions for optimal project outcomes. • Conduct technical and design reviews. • Write protocols and reports for various technical aspects including, but not limited to design verifications and validations • Conduct product development tasks & documentation required to satisfy design controls and risk management in accordance with established SOPs. • Provide presentations, reports and schedules as required to manage projects and to communicate status, risks and issues. • Effectively and thoughtfully incorporate required regulatory medical device standards (FDA, ISO, IEC, EN) • Interface with Program Management to provide schedule input • Construct Design History Files in accordance with SOP's. • Obtain and maintain safety certifications to medical device standards through organizations such as UL, Intertek, TUV • Drive the development of solutions to technical issues and implement within the established design and design change control processes. • Lead and influence offsite and 3rd party design engineering resources. Minimum Requirements: Education: BS, Electrical Engineering or Biomedical engineering with electrical engineering concentration Minimum Experience: Bachelor's plus a minimum of 5 years relevant medical device experience; or Master's plus a minimum of 3 years relevant medical experience; Skills/Qualifications: • PCB design software such as PCAD, PADS OrCAD or Altium • Familiarity with electrical and medical device safety standards • Requirements development and management for embedded systems • Knowledge of Good Manufacturing Practices (GMP), Quality System Regulations (FDA QSR) and design controls • Requirements Tracing • Design for Six Sigma techniques and methodologies and knowledge of Statistical Analysis, and Design of Experiments. Working knowledge of Minitab or equivalent statistical analysis tools • Strong written, verbal, and presentation skills • MS office tools including Word, Excel, PowerPoint, Project • Thorough understanding of engineering practices, product safety and Additional Information To know more about this position or to schedule an interview, please contact Sagar Rathore sagar.rathore(@)collabera.com ************

Weston & Sampson is currently seeking project and Project Engineers out of any of our New England office locations with 6 to 12 years of experience with roadway/highway design work. With the influx of infrastructure funding, Weston & Sampson is continually looking to expand our transportation practice with highly talented and passionate professionals. You will be part of a team of nearly a dozen engineers who focus on roadway and highway design, traffic engineering and transportation planning, and stormwater, hydraulics and permitting. You will work closely with Project Managers and Team Leaders who will mentor you and guide you to success with your career at Weston & Sampson. What you'll do: Opportunity with a variety of projects including roadway design along municipal and state highways, intersection improvements such as roundabouts and signalized intersections, streetscape, multi-use pathways, ADA enhancements, bridge projects, and drainage improvement projects Be flexible in terms of handling multiple and wide range of assignments Responsible for carrying out all design tasks of a project including roadway geometry and plans, estimates, technical specifications, and reports while adhering to the project scope, budget, and schedule Direct contact with Clients, supporting the Project Manager with response to correspondence and meeting preparation, attendance, and presentations Opportunity to present at public information meetings and municipal meetings (i.e. inland wetlands) Mentor and assist staff engineers Active involvement with professional organizations such as CSCE, ACEC, ITE, WTS, etc. is encouraged to enhance relationships with peers. What you will bring: Bachelor of Science degree in Civil Engineering Master of Science in Civil or Transportation Engineering a plus Licensed Professional Engineer in either MA, NH, CT (or ability to obtain licensure within 6 months) NCEES Record a plus Proficiency in Autocad Civil 3D or Bentley OpenRoads is required; experience in both is a plus Experience with HydroCAD or StormCAD a plus Established relationships with CTDOT and CT Municipalities a plus Experience in the use of the relevant CTDOT Design Manuals and AASHTO Green Book Strong written and verbal communication skills and organization and time management skills required Valid driver's license Pay Range: $115,000.00 - $145,000.00 depending on experience #LI-Hybrid Overview Weston & Sampson is an 100% employee-owned, full-service environmental and infrastructure consulting firm made up of more than 800 professionals, who work together to develop innovative, cost-effective solutions for our clients. Since our founding in 1899, Weston & Sampson's mission has been to protect, improve, and sustain the natural and built environment to enhance the quality of life. As we grow, we are seeking dedicated technical and professional individuals who want to collaborate on meaningful projects with a team that respects and values their ideas. Weston & Sampson offers a flexible work environment, competitive compensation, industry-leading benefits, and exciting career growth opportunities-all in a supportive and dynamic corporate culture that embraces diverse perspectives and recognizes people for their contributions. Weston & Sampson is an Equal Opportunity Employer. We embrace the rich perspectives and experiences that arise from people of different races, ethnicities, cultures, sexual orientation, gender identities, ages, socio-economic statuses, abilities, and religions, as well as other untapped groups, within our Weston & Sampson family and the communities we serve. Weston & Sampson is committed to the principles of Inclusion, Diversity, Equity, and Access (IDEA). Our goal is to foster a sense of belonging and equitable representation across our organization and to empower our employees to incorporate IDEA values into the work they perform. Your world is always changing, and so are we. Join us as we grow: *********************************************** A Note to Third-Party Recruiters: Weston & Sampson coordinates all recruiting and hiring at our company. We do not accept unsolicited resumes from third-party recruiters, staffing agencies or related firms. Resumes are only accepted if a signed agreement is in place. All unsolicited resumes will be considered the property of Weston & Sampson. Weston & Sampson is not responsible for any fees related to unsolicited resumes. #midlevelprofessionals

Gale Associates, Inc. is seeking a Project Engineer to join our Rockland, MA office. Gale is a well-respected national engineering/planning firm celebrating over 61 years in business and rated one of Zweig Groups Best Firms to Work For for the past 12 consecutive years. Requirements: A Minimum Bachelors Degree in Civil Engineering, Construction, or Structural Engineering, and a minimum of 7 years in exterior building envelope renovations, analysis, design and construction administration. Technical experience in building envelopes and experience with moisture intrusion, evaluations, and renovation designs is essential. Registration path required. P. E. Registration is preferred. Excellent written/presentations skills and proficient computer skills (MS Office, CAD, and Outlook are required). A competitive salary is only one part of the benefits that Gale provides to compensate and recognize staff. Salary range: $101,200-$109,800 annually Gale offers a strong mentoring program that promotes advancement opportunities for all staff. In addition, Gale takes pride in our balanced work environment which includes monthly events that provide time for our Gale Team to socialize. Please visit our careers section at ********************** for more details. First-day coverage benefits including: Harvard Pilgrim Health Insurance Delta Dental & EyeMed Vision insurance Health Savings Account (HSA) Flexible work schedule/hybrid options Half-day Fridays year round 401(k) Profit Sharing Plan and Trust 3 weeks vacation accrual upon hire 12 annual paid holidays, competitive sick & personal time Tuition reimbursement program for continuing education programs College loan-repayment program Fully-paid Life/Disability insurance Flexible Spending Account and Dependent Care Assistance programs Gale is an Equal Opportunity Employer Veteran/Disability

Project Engineer Responsibilities: Preparing quotations for customers based on specified technical requirements Preparing, scheduling, coordinating, and monitoring of assigned engineering projects. Preparing bills of materials to hand over to the production team for assembly Identifying and improving documentation and processes associated with quotation and production workflow Interacting with clients, interpreting their needs and requirements, and ensuring their requirements are properly translated to the production team. Performing quality control tasks on budgets, schedules, and plans, and reporting on the project's status. Cooperating and communicating with the production team and other project participants and collaborating with senior engineers to create more efficient project methods and to maintain the project's profitability. Reviewing the engineering tasks and initiating the necessary corrective actions. Developing specifications for the project's needed equipment. Creating frameworks to measure the project's metrics and data collection. Establishing field test methods and methods for monitoring the quality of those tests. Ensuring the project's compliance with the applicable codes, practices, policies, performance standards, and specifications. Project Engineer Requirements: A bachelor's degree in mechanical engineering or a related field. Excellent computer literacy and knowledge of design and visualization software. The ability to work with multiple discipline projects. Excellent project management and supervision skills. Excellent organizational, time management, leadership, and decision-making skills. Strong written and verbal communication skills. Knowledge of applicable codes, policies, standards, and best practices. Ability to work in a fast-paced environment and handle a wide range of responsibilities

Skanska is searching for a dynamic Project Engineer. This is a great opportunity to start a career with a company that builds things that matter and values its team. We are proud to share our culture of diversity and inclusion. Our work makes a clear contribution to society and the environment around us. We build in many different verticals. (******************************************************** Whether we are building schools to provide inspiring spaces for learning, roads to connect communities, or hospitals to care for patients, it all contributes to our purpose - we build for a better society. Skanska's values -Be Better Together, Act Ethically and Transparently, Commit to Customer, and Care for Life-are deeply engrained in how we work, which is why our values support and drive our D&I efforts. The Project Engineer works on-site within the Project Management Team and is responsible for contract setup, submittals, assisting with the bid package process, change orders and assisting with the scheduling of the project. The Project Management Team can vary greatly depending on the size and complexity of the projects, which in turn will affect the number of responsibilities the Project Engineer will be involved in. The Project Engineer must be a flexible and adaptable team-player, as well as have strong communication and client service skills. **Project Engineer Required Qualifications:** + 1-3 Years of experience creating documentation such as RFIs, and client correspondence on issues related to the notification provisions in contracts. + 1-3 years of reading and understanding construction plans and drawings and the technical specifications associated with drawings. Able to outline specifications required for submission to clients and ensure submittals and shop drawings are approved. + 1-3 years expereince with project close out. + Bachelor's Degree - Construction Management, Engineering, or similar or 8 years of equivalent experience **Currently, the company is not considering applicants for this position who now or in the future require employment sponsorship by the company.** **Our** Investment (************************************************ **in you:** + We believe that Benefits (********************************************************************** should connect you to the support you need when it matters most, and should help you care for those who matter most. That's why we provide an array of options (including medical, dental, and vision insurance plans), expert guidance, and always-on tools, that are personalized to meet the needs of your reality - to help support you physically, financially, and emotionally through the big milestones and in your everyday life. Please visit the compensation and Benefits (********************************************************************** summary on our careers site for more details. + As a Skanska community, our values ground us, and our diversity of experience propels us forward. No matter what your career stage, there's a place for you to thrive here and partner with us in shaping how our world lives, moves, and connects. + At Skanska, we Care for Life. And we're committed to supporting your whole health and peace of mind through inclusive and personalized total rewards. + We're committed to your success by developing you in your role and supporting your career growth + Compensation and financial well-being (********************************************************************** - Competitive base salary, excellent bonus program, 401k, & Employee ownership program. **Come work with us and join a winning team!** **Salary Low** USD $66,700.00/Yr. **Salary High** USD $85,000.00/Yr. **Background Check Required** Skanska is an Equal Employment Opportunity (EEO) Employer. We do not discriminate on the basis of race, color, religion, sex, national origin, disability, age, genetic information, citizenship, protected veteran status, or any other categories protected under applicable federal, state, and local laws. Skanska Equal Employment Opportunity Skanska uses knowledge & foresight to shape the way people live, work, and connect. More than 135 years in the making, we're one of the world's largest construction and project development companies. With operations in select markets throughout the Nordics, Europe and the United States, global revenue totaled $15.9 billion in 2024. Skanska in the U.S. operates 28 offices across the country, with its headquarters in New York City. In 2024, the U.S. construction sector generated $8.2 billion in revenue, and the U.S. development sector's net investments in commercial projects totaled $224 million. Together with our customers and the collective expertise of our 6,300 teammates in the U.S. and 26,300 globally, we create innovative and sustainable solutions that support healthy living beyond our lifetime. Skanska's Applicant Privacy Policy for California Residents (****************************************************************************************************************** **Search Firm and Employment Agency Disclaimer** _Search Firm and Employment Agency Disclaimer Skanska USA Human Resources ("Skanska HR") provides HR services to the Skanska business units within the U.S.A. including Skanska USA Civil Inc., Skanska USA Building Inc., Skanska USA Commercial Development Inc. and Skanska Infrastructure Development Inc. (collectively "Skanska USA"). As such, Skanska HR is the sole authorized representative of Skanska USA to execute any agreements with search firms, employment agencies or any employment vendor ("Vendor"). As a condition precedent to any entitlement for payment, a Vendor shall have both (1) Skanska USA Placement Agreement, and (2) an Engagement Job Order executed by an authorized Skanska HR representative. Absent the properly executed documents, Skanska HR shall have no obligation to make payment to the Vendor. Verbal or written communications from any employee of Skanska USA business units shall not be considered binding obligations. All resumes whether unsolicited or solicited shall be considered property of Skanska HR._

The importance of water to the health of our world can't be overstated. As the frequency and intensity of floods, droughts and storms increases, the water industry must continue to build resiliency and lead from the front. Together with our clients, we are thinking and doing things differently to help pre-empt and prepare for what's next. Be a part of this dynamic and committed team of diverse water specialists and drive change for your community. You'll be able to apply our powerful global network of skills and decades of experience to create positive water outcomes that respect nature and nurture communities. Who are we looking for? We are looking for a Project Engineer to join our growing Water team in Hyannis, MA. In this role, you'll be an integral member of our multi-disciplinary project team working on water, wastewater, utility, and infrastructure design projects throughout the region. This will include the preparation of technical reports, design drawings, contract documents, cost estimates and permits. Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in: * Contract Management: Deliver required outcomes by coordinating activities of subcontractors and suppliers and acting as a primary point of contact for them while working within an established contract management plan. * Process Design Engineering: Contribute to the analysis of information and the specification of the methods and process steps, as well as the plant, machinery, and equipment, required to design and continuously improve manufacturing or materials processes and process systems to deliver the end product within specified cost and quality parameters. * Client & Customer Management (External): Help senior colleagues manage client and customer relationships by using relevant sales or client systems. * Monitor Construction Works: Monitor and oversee the delivery of works to ensure that construction, maintenance, or improvement works are delivered in accordance with quality, cost, and time requirements. * Engineering Drawings: Create engineering drawings to support the communication, evaluation, and implementation of engineering solutions. * Engineering Solutions Design: Contribute to the design of engineering solutions; design the feasibility testing approach and supervise its implementation to support the development and validation of engineering solutions. * Personal Capability Building: Develop own capabilities by participating in assessment and development planning activities as well as formal and informal training and coaching; gain or maintain external professional accreditation, where relevant, to improve performance and fulfill personal potential. Maintain an understanding of relevant technology, external regulation, and industry best practices through ongoing education, attending conferences, and reading specialist media. * Project Management: Work within an established project management plan to achieve specific goals. What you will bring to the team: * Bachelor's and/or Master's degree in Civil or Environmental Engineering * EIT certification preferred * At least 3-5 years of municipal water experience; prior water and wastewater infrastructure design experience with local municipalities a plus * Able and willing to travel to visit job sites throughout the Cape as needed #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

We're looking for a driven Building Envelope Engineer / Project Manager who's ready to take full ownership of meaningful, real-world projects. This role is a blend of design, investigation, and hands-on field work across structures that range from brand-new construction to buildings over a century old. You'll step into a key position where your expertise in building codes, renovation practices, and material systems will directly shape the solutions we deliver. Expect to be involved in everything from design calculations, drawings, and specifications to bid assistance and construction administration. You'll not only manage projects -you'll manage relationships. Collaboration with clients, subcontractors, and internal teams will be a big part of your day, along with opportunities to participate in business development and help strengthen long-term partnerships. What we're looking for: •Bachelor's degree in Civil Engineering, Architectural Engineering, or a related discipline •4+ years of experience in Building Technology, Structural Engineering, or Architectural Engineering •E.I.T. Required;P.E. Preferred •Strong understanding of building envelopes, modern materials, and restoration challenges •A communicator who enjoys taking the lead and seeing projects through to success If you want to grow your technical skills, strengthen your leadership, and play a visible role in a company's future, this is a great opportunity to make an impact -and be recognized for it.

Tell us about a friend who might be interested in this job. All privacy rights will be protected. First consideration will be given to those applicants that apply within the first 14 days. MINIMUM ENTRANCE REQUIREMENTS\: Possession of a Second Class or higher Stationary Engineers license, based on the standards established by the Massachusetts Department of Public Safety and pursuant to Chapter 146 of the Massachusetts General Laws, is required. Comprehensive Benefits When you embark on a career with the Commonwealth, you are offered an outstanding suite of employee benefits that add to the overall value of your compensation package. We take pride in providing a work experience that supports you, your loved ones, and your future. Want the specifics? Explore our Employee Benefits and Rewards! An Equal Opportunity / Affirmative Action Employer. Females, minorities, veterans, and persons with disabilities are strongly encouraged to apply. The Commonwealth is an Equal Opportunity Employer and does not discriminate on the basis of race, religion, color, sex, gender identity or expression, sexual orientation, age, disability, national origin, veteran status, or any other basis covered by appropriate law. Research suggests that qualified women, Black, Indigenous, and Persons of Color (BIPOC) may self-select out of opportunities if they don't meet 100% of the job requirements. We encourage individuals who believe they have the skills necessary to thrive to apply for this role. Duties: Participates in the operation and maintenance of a combined heat plant (CHP) station during an assigned shift; cleans, maintains, repairs and operates steam generators and their auxiliary equipment such as oil burners, boiler feed pumps, flow meter, compressors, generators, and other power plant equipment; makes rounds of Power Plant during his/her watch and observes operation of all equipment; supervises 3rd Class Engineer and Steam Fireman assigned to his/her watch, instructs plant personnel in Power Plant operating procedures and proper safety procedures to be used when equipment is taken out of service; keeps station diary log on his/her assigned watch recording gauge readings, fuel consumed, power generated, kilowatts purchased, water pumped, maintenance work performed and any other pertinent data; performs all other related duties as requested. Comments: This is a Civil Service position. Please note that salaries for union positions are determined according to the provisions of the respective collective bargaining agreement. Applicants must have no felony convictions, to include any actions defined in 5 U.S.C. 301; U.S.C. 509, 510; 42 U.S.C. 15601-15609. The Massachusetts Department of Correction shall not hire anyone who may have direct contact with offenders, who has engaged in sexual abuse in a prison or other institution as defined in 42 U.S.C. 1997; or has been convicted of engaging or attempting to engage in sexual activity in the community facilitated by force, overt or implied threats of force or coercion, or if the victim did not consent or was unable to consent or refuse, or has been civilly or administratively adjudicated to have engaged in the activity described in the above paragraph. The agency shall consider any incidents of sexual harassment in determining whether to hire anyone who may have contact with offenders or residents. The DOC urges bi-lingual applicants to apply. Apply for a Job Apply for a Job for JAWS Users Create a Profile Create a Profile for JAWS Users System Requirements

ABOUT US HirexHire (pronounced hire by hire) is a recruiting and talent consultancy that integrates with companies short-term to provide long-term talent solutions. We take a seat in our client's everyday operations to understand their people goals, gaps, and challenges. We then develop and implement the processes and technologies to execute a sustainable and scalable talent plan. We partner with companies expecting or experiencing high growth who need to hire at scale or fill a critical role rapidly. Our clients are not looking for quick-fix placements but are thoughtfully building a hiring strategy to scale their businesses. OUR CLIENT Job Location: East Providence, RI Industry: Specialty Chemicals Manufacturing Company Size: 500+ What They Do: Our client is a global leader in Specialty Chemicals and Coatings, powering innovation across the Printing and Packaging industries. As one of the largest suppliers of inks and coatings in North America, they're known for combining cutting-edge technology with sustainable solutions that touch everyday products-from food packaging to printed materials. Joining their team means being part of a company that values precision, creativity, and making a real-world impact. THE ROLE We're looking for a sharp, hands-on Electrical Engineer to join a team that's pushing the boundaries of innovation in the inks and coatings industry. In this role, you'll take ownership of electrical and electronics design, drive hardware development, and ensure electrical safety and compliance-all while helping bring next-generation solutions to life. You'll play a key role in designing and building systems that power real-world applications, supporting both engineering and manufacturing efforts from concept to execution. This role is onsite in East Providence, RI. WHAT YOU WILL DO Own the control panel design process - from concept through implementation Design, ECAD schematic capture, layout, and debug of Industrial Control Panels Select and justify components based on function, compatibility, and reliability Collaborate on design reviews, redline drawings, and make proactive recommendations (e.g., identifying components with high failure rates) Spec and implementation of motors, sensors, and control topologies for industrial machinery and production lines Work closely with cross-functional teams to support project planning and execution Managing production with 3rd party vendors for the manufacturing and debug of Industrial Control Panel Design, development, documentation, and assembly of electrical modifications to lab equipment and printing presses Assembly and wiring of first article panels and electrical assemblies Design, development, documentation, and assembly of hardware test fixture systems Support development equipment specification documents and operator manual WHAT YOU WILL NEED Bachelor's degree in Electrical, Electronics, or Automation Engineering (open to strong early-career engineers with hands-on design experience). Experience in designing, building, and documenting industrial and PLC controlled industrial panels and wire harnesses Strong understanding of electrical engineering principles and UL-approved industrial panel design Test equipment proficiency (oscilloscope, logic analyzer, function generator, etc) Ability to manage design controls, develop and define requirements and test protocols NICE TO HAVE Experience using Solidworks Electrical Experience designing industrial panels with Beckhoff PLCs Experience with Industrial Standards Approval (UL, NFPA, CE) Experience with Industrial Communication Protocols (EtherCAT, Modbus TCP, IO-Link, etc) Experience conducting electrical signal quality analysis and rectifying issues ABOUT US HirexHire (pronounced hire by hire) is a recruiting and talent consultancy that integrates with companies short-term to provide long-term talent solutions. We take a seat in our client's everyday operations to understand their people goals, gaps, and challenges. We then develop and implement the processes and technologies to execute a sustainable and scalable talent plan. We partner with companies expecting or experiencing high growth who need to hire at scale or fill a critical role rapidly. Our clients are not looking for quick-fix placements but are thoughtfully building a hiring strategy to scale their businesses. OUR CLIENT Job Location: East Providence, RI Industry: Specialty Chemicals Manufacturing Company Size: 500+ What They Do: Our client is a global leader in Specialty Chemicals and Coatings, powering innovation across the Printing and Packaging industries. As one of the largest suppliers of inks and coatings in North America, they're known for combining cutting-edge technology with sustainable solutions that touch everyday products-from food packaging to printed materials. Joining their team means being part of a company that values precision, creativity, and making a real-world impact. THE ROLE We're looking for a sharp, hands-on Electrical Engineer to join a team that's pushing the boundaries of innovation in the inks and coatings industry. In this role, you'll take ownership of electrical and electronics design, drive hardware development, and ensure electrical safety and compliance-all while helping bring next-generation solutions to life. You'll play a key role in designing and building systems that power real-world applications, supporting both engineering and manufacturing efforts from concept to execution. This role is onsite in East Providence, RI. WHAT YOU WILL DO Own the control panel design process - from concept through implementation Design, ECAD schematic capture, layout, and debug of Industrial Control Panels Select and justify components based on function, compatibility, and reliability Collaborate on design reviews, redline drawings, and make proactive recommendations (e.g., identifying components with high failure rates) Spec and implementation of motors, sensors, and control topologies for industrial machinery and production lines Work closely with cross-functional teams to support project planning and execution Managing production with 3rd party vendors for the manufacturing and debug of Industrial Control Panel Design, development, documentation, and assembly of electrical modifications to lab equipment and printing presses Assembly and wiring of first article panels and electrical assemblies Design, development, documentation, and assembly of hardware test fixture systems Support development equipment specification documents and operator manual WHAT YOU WILL NEED Bachelor's degree in Electrical, Electronics, or Automation Engineering (open to strong early-career engineers with hands-on design experience). Experience in designing, building, and documenting industrial and PLC controlled industrial panels and wire harnesses Strong understanding of electrical engineering principles and UL-approved industrial panel design Test equipment proficiency (oscilloscope, logic analyzer, function generator, etc) Ability to manage design controls, develop and define requirements and test protocols NICE TO HAVE Experience using Solidworks Electrical Experience designing industrial panels with Beckhoff PLCs Experience with Industrial Standards Approval (UL, NFPA, CE) Experience with Industrial Communication Protocols (EtherCAT, Modbus TCP, IO-Link, etc) Experience conducting electrical signal quality analysis and rectifying issues

Job DescriptionDescription: Full time 1st shift (6:00 a.m.-3:00 p.m.) LOCAL CANDIDATES ONLY - Relocation Not Available The Controls & Automation Engineer is responsible for designing, programming, and implementing robust automation and control systems that support manufacturing operations. This role ensures production processes run efficiently, safely, and at the highest quality, while driving continuous improvement through system upgrades, optimization, and integration of Industry 4.0 technologies. The engineer will serve as both a project lead and collaborative team member, working with engineers, project managers, vendors, and customers to deliver effective, reliable automation solutions. Design, program, and support automation and control systems, including PLCs, HMIs, robotics, motion control, and SCADA systems. Develop and review electrical control schematics, wiring diagrams, panel layouts, and Bills of Material in compliance with standards. Lead or support automation projects from concept through installation, commissioning, and validation. Collaborate cross-functionally (production, maintenance, quality, IT, and customer teams) to ensure seamless system integration and high levels of collaboration. Diagnose, troubleshoot, and resolve equipment malfunctions to minimize downtime and ensure manufacturing efficiency. Drive continuous improvement through automation enhancements, process optimization, lean practices, and data integration. Ensure compliance with safety standards, regulatory requirements, quality systems, and company policies. Maintain complete documentation for control systems, including CAD drawings, programs, and technical manuals. Train maintenance, operations, and customer personnel on automated equipment and systems. Stay current with emerging technologies in industrial automation and recommend upgrades where appropriate. Requirements: Education: Bachelor's degree in Electrical Engineering (required). Experience: Minimum 5 years of experience in industrial automation, manufacturing controls, or related field (10+ years preferred). Technical Skills Strong knowledge of PLC programming (Allen-Bradley/Rockwell, Siemens, or similar). Experience with HMI/SCADA systems and industrial networks (Ethernet/IP, Profibus, Modbus, IO-Link, etc.). Proficiency in electrical design software (AutoCAD Electrical, SolidWorks Electrical, or equivalent). Hands-on experience with robotics, vision systems, sensors, drives, motion control, and pneumatic systems. Familiarity with SQL-based plant floor data gathering systems, MES, and Industry 4.0/Smart Manufacturing principles. Experience with plant-wide SCADA systems (Ignition, FactoryTalk, etc.) Experience with IT/OT networking and high-level languages (Visual Basic, C#, or similar). Core Competencies Strong problem-solving and analytical skills with ability to apply lean/continuous improvement principles. Ability to manage multiple projects simultaneously, serving as both a project lead and supporting engineer. Excellent written and verbal communication skills, with the ability to present to managers, customers, and vendors. Ability to work independently and in cross-functional teams. Ability to write reports, business correspondence and procedure manuals Ability to think critically. Proven track record of improving system reliability, efficiency, and integration through automation. Physical & Work Environment Requirements Ability to work in a manufacturing plant environment, including standing, walking, and occasional lifting. Occasional travel to vendors, customer sites, or other facilities may be required. Must follow all safety protocols and wear appropriate PPE when on the plant floor. Benefits We offer a competitive & market salary and a comprehensive benefits package including health insurance, dental, vision, life insurance, STD, LTD, 401(k), profit sharing. Riverdale Mills is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic About Us Riverdale Mills Corporation is one of the largest manufacturers of galvanized and PVC coated welded wire mesh in the world. A privately held company based in Northbridge, MA. Riverdale Mills specializes in the design and manufacturing of commercial, industrial and consumer wire products, tools and accessories for the marine, aquaculture, security, and construction and farming industries. The company's exemplary quality and manufacturing expertise is known worldwide.

Norwood, MA On-site Full-time About the job Client Engineering is seeking a mechanical engineer to work with our team of dedicated engineers in the field of building energy efficiency. Successful candidate shall have 2-5 years post academic experience in building energy auditing (ASHRAE Level I and/ or ASHRAE Level II) and HVAC design and/ or commissioning. Experience with eQUEST or Energy Plus building energy simulation programs is a plus. Candidate must have good oral and written communication skills. Responsibilities include performing energy audits and developing new strategies for enhancing building performance.

Established nearly two centuries ago, FM is a leading mutual insurance company whose capital, scientific research capability and engineering expertise are solely dedicated to property risk management and the resilience of its policyholder-owners. These owners, who share the belief that the majority of property loss is preventable, represent many of the world's largest organizations, including one of every four Fortune 500 companies. They work with FM to better understand the hazards that can impact their business continuity to make cost-effective risk management decisions, combining property loss prevention with insurance protection. We are looking for a research engineer to assess the risks of complex industrial equipment and systems, and to develop risk mitigation and loss prevention methodologies accordingly. The researcher will join the equipment and material science team of FM Research in Norwood, MA, closely working with team members and under the general guidance of an FM team lead. The research engineer is expected to bring solid engineering and/or research experience and support research proposals. Responsibilities include: Review loss data in various formats and develop trends and insights for major industrial equipment such as gas turbines, steam turbines, wind turbines, generators, transformers, boilers and pressure vessels, and other rotating or stationary heavy-duty machinery in high hazard industries and renewable industries. Work closely with the team lead, staff engineering, and operation engineering to support understanding of contributing factors and root causes of major equipment losses as needed, provide expert input on technical issues and engineering risk assessment. Assess/evaluate risk mitigation technologies and develop in-house methodologies, to prevent or reduce equipment loss, including tools or job-aids using physics-based and/or data analytics driven approaches. Support the development and revisions of relevant FM Operating Standards. Develop, operate, maintain, and troubleshoot tools and testing setups including equipment, devices, instrumentation, network, and software, for various electromechanical applications such as equipment condition monitoring. Support the development of condition monitoring experiments and test cases using various hardware and software-based methods, to evaluate system efficacy and emulate/simulate/analyze faulty or failure conditions of complex equipment and engineering systems. Develop solid and fluid mechanics models (FEA and/or CFD) as needed to assess thermal and mechanical properties of systems, components, and material coupons. Lead or support experimental works for the evaluation of mechanical properties of systems, components, and coupons, interpret and evaluate test results. Develop research technical reports or memos under the guidance of technical lead. Propose and develop feasible, relevant, and value-added research topics or project ideas including potential collaborations with internal and external entities. Doctoral degree in mechanical engineering (or other fields of science and engineering with the right experience / exposure) with at least 5 years of industrial experience or a Master degree with at least 10 years of industrial experience, in the field of mechanical engineering, preferably rotating machinery. Strong hands-on knowledge and experience in several engineering functions related to industrial equipment including product design, analysis, testing, operation, maintenance, inspection, continuous monitoring, and troubleshooting. The focus is placed on turbines, generators, transformers, boilers and pressure vessels, electromechanical systems, HVAC systems, and other rotating or stationary equipment, as well as the complex systems/processes consist of these machines and associated peripherals and accessories. Strong engineering fundamentals such as heat transfer, thermodynamics, fluid dynamics, engineering mechanics especially vibration/dynamics and mechanics of failure, at material, component, and system levels, engineering design and analysis with software and programming, as well as instrumentation and experimentation. Knowledge and experience in data modeling/analytics including physics or rule-based methods, statistical methods, machine learning and AI methods, for applications in risk assessment, risk differentiation, fault detection and diagnostics, etc. Strong accountability, through strength in attention to details, problem-solving, result delivery, and sufficient project management skills. Strong self-driven work ethics and work under general advisory but not close supervision. Strong verbal and written communication including presentation skills, facing management and leaders, colleagues, advisors, customers, collaborators, and technology providers/vendors. Strong collaboration and team working spirit, receptive, transparent, and respectful. The final salary offer will vary based on geographic location, individual education, skills, and experience. The position is eligible to participate in FM's comprehensive Total Rewards program that includes an incentive plan, generous health and well-being programs, a 401(k) and pension plan, career development opportunities, tuition reimbursement, flexible work, time off allowances and much more. FM is an Equal Opportunity Employer and is committed to attracting, developing, and retaining a diverse workforce. #FMG #LI-TA1

Established in 1991, Collabera has been a leader in IT staffing for over 22 years and is one of the largest diversity IT staffing firms in the industry. As a half a billion dollar IT company, with more than 9,000 professionals across 30+ offices, Collabera offers comprehensive, cost-effective IT staffing & IT Services. We provide services to Fortune 500 and mid-size companies to meet their talent needs with high quality IT resources through Staff Augmentation, Global Talent Management, Value Added Services through CLASS (Competency Leveraged Advanced Staffing & Solutions) Permanent Placement Services and Vendor Management Programs. Collabera recognizes true potential of human capital and provides people the right opportunities for growth and professional excellence. Collabera offers a full range of benefits to its employees including paid vacations, holidays, personal days, Medical, Dental and Vision insurance, 401K retirement savings plan, Life Insurance, Disability Insurance. Job Description SummaryOf Position: A Senior Research Engineer for the DVT Preventionbusiness will substantially contribute to the design and development andsustaining engineering activities of Intermittent pneumatic compression devicesused to prevent Deep Vein Thrombosis, a leading cause of morbidity inhospitals. These activities will cover all phases of the product life cyclefrom concept through end of life. The individual in this position will becalled upon to work in a dynamic team environment lead projects, contribute todesign decisions and execute requirements across a wide variety of projects.The devices are electro-mechanical pneumatic systems that control the inflationof pneumatic compression garments used in the prevention of Deep VeinThrombosis (DVT). The ability to execute hardware electronic designs withembedded software is a key requirement. Attention to detail and workingknowledge of regulations for the medical device industry are essential. Theengineer must be able to work in a team environment and be able to communicateclearly across all disciplines including Quality Assurance, Regulatory Affairs,Manufacturing, Marketing, Clinical Affairs and outside design partners andregulatory agencies. rootcause analysis Qualifications Essential Functions: • Contribute to the development and maintenance of DVT prevention systems. • Write and review requirements specifications relating to both electronics and software. • Critically evaluate hardware and software design implementations and challenge and confirm design decisions for optimal project outcomes. • Conduct technical and design reviews. • Write protocols and reports for various technical aspects including, but not limited to design verifications and validations • Conduct product development tasks & documentation required to satisfy design controls and risk management in accordance with established SOPs. • Provide presentations, reports and schedules as required to manage projects and to communicate status, risks and issues. • Effectively and thoughtfully incorporate required regulatory medical device standards (FDA, ISO, IEC, EN) • Interface with Program Management to provide schedule input • Construct Design History Files in accordance with SOP's. • Obtain and maintain safety certifications to medical device standards through organizations such as UL, Intertek, TUV • Drive the development of solutions to technical issues and implement within the established design and design change control processes. • Lead and influence offsite and 3rd party design engineering resources. Minimum Requirements: Education: BS, Electrical Engineering or Biomedical engineering with electrical engineering concentration Minimum Experience: Bachelor's plus a minimum of 5 years relevant medical device experience; or Master's plus a minimum of 3 years relevant medical experience; Skills/Qualifications: • PCB design software such as PCAD, PADS OrCAD or Altium • Familiarity with electrical and medical device safety standards • Requirements development and management for embedded systems • Knowledge of Good Manufacturing Practices (GMP), Quality System Regulations (FDA QSR) and design controls • Requirements Tracing • Design for Six Sigma techniques and methodologies and knowledge of Statistical Analysis, and Design of Experiments. Working knowledge of Minitab or equivalent statistical analysis tools • Strong written, verbal, and presentation skills • MS office tools including Word, Excel, PowerPoint, Project • Thorough understanding of engineering practices, product safety and Additional Information To know more about this position or to schedule an interview, please contact Sagar Rathore sagar.rathore(@)collabera.com ************

Full-time Description Full time 1st shift (6:00 a.m.-3:00 p.m.) LOCAL CANDIDATES ONLY - Relocation Not Available The Controls & Automation Engineer is responsible for designing, programming, and implementing robust automation and control systems that support manufacturing operations. This role ensures production processes run efficiently, safely, and at the highest quality, while driving continuous improvement through system upgrades, optimization, and integration of Industry 4.0 technologies. The engineer will serve as both a project lead and collaborative team member, working with engineers, project managers, vendors, and customers to deliver effective, reliable automation solutions. Design, program, and support automation and control systems, including PLCs, HMIs, robotics, motion control, and SCADA systems. Develop and review electrical control schematics, wiring diagrams, panel layouts, and Bills of Material in compliance with standards. Lead or support automation projects from concept through installation, commissioning, and validation. Collaborate cross-functionally (production, maintenance, quality, IT, and customer teams) to ensure seamless system integration and high levels of collaboration. Diagnose, troubleshoot, and resolve equipment malfunctions to minimize downtime and ensure manufacturing efficiency. Drive continuous improvement through automation enhancements, process optimization, lean practices, and data integration. Ensure compliance with safety standards, regulatory requirements, quality systems, and company policies. Maintain complete documentation for control systems, including CAD drawings, programs, and technical manuals. Train maintenance, operations, and customer personnel on automated equipment and systems. Stay current with emerging technologies in industrial automation and recommend upgrades where appropriate. Requirements Education: Bachelor's degree in Electrical Engineering (required). Experience: Minimum 5 years of experience in industrial automation, manufacturing controls, or related field (10+ years preferred). Technical Skills Strong knowledge of PLC programming (Allen-Bradley/Rockwell, Siemens, or similar). Experience with HMI/SCADA systems and industrial networks (Ethernet/IP, Profibus, Modbus, IO-Link, etc.). Proficiency in electrical design software (AutoCAD Electrical, SolidWorks Electrical, or equivalent). Hands-on experience with robotics, vision systems, sensors, drives, motion control, and pneumatic systems. Familiarity with SQL-based plant floor data gathering systems, MES, and Industry 4.0/Smart Manufacturing principles. Experience with plant-wide SCADA systems (Ignition, FactoryTalk, etc.) Experience with IT/OT networking and high-level languages (Visual Basic, C#, or similar). Core Competencies Strong problem-solving and analytical skills with ability to apply lean/continuous improvement principles. Ability to manage multiple projects simultaneously, serving as both a project lead and supporting engineer. Excellent written and verbal communication skills, with the ability to present to managers, customers, and vendors. Ability to work independently and in cross-functional teams. Ability to write reports, business correspondence and procedure manuals Ability to think critically. Proven track record of improving system reliability, efficiency, and integration through automation. Physical & Work Environment Requirements Ability to work in a manufacturing plant environment, including standing, walking, and occasional lifting. Occasional travel to vendors, customer sites, or other facilities may be required. Must follow all safety protocols and wear appropriate PPE when on the plant floor. Benefits We offer a competitive & market salary and a comprehensive benefits package including health insurance, dental, vision, life insurance, STD, LTD, 401(k), profit sharing. Riverdale Mills is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, genetics, disability, age, veteran status, or any other characteristic About Us Riverdale Mills Corporation is one of the largest manufacturers of galvanized and PVC coated welded wire mesh in the world. A privately held company based in Northbridge, MA. Riverdale Mills specializes in the design and manufacturing of commercial, industrial and consumer wire products, tools and accessories for the marine, aquaculture, security, and construction and farming industries. The company's exemplary quality and manufacturing expertise is known worldwide.