Quality control analyst jobs in Auburn, AL

HTI has an immediate opening for an experienced QC Chemist or Lab Analyst with an international manufacturing company at their Augusta, GA facility. This is an exciting opportunity to join a large, stable company that offers great benefits! Pay: $23 - $28/hour, depending on experience Working hours: Will train during normal working hours (Mon-Fri 8-5) and then go to a 12-hour rotating shift (a DuPont shift schedule, 7am-7pm/7pm-7am) Requirements: Must have Associate's or Bachelor's degree in Chemistry Must have 2+ years of recent experience as a QC Chemist or Lab Analyst with a manufacturing company, preferably in the pharmaceutical, food or chemical industry Experience with ICP, IC/HPLC and Titrators is strongly preferred Must have LIMS software and Microsoft Excel/Word/Outlook experience; SAP is preferred Must be open to working 12-hour rotating shifts Ability to add, subtract, multiply and divide in all units of measure, using whole numbers, common fractions and decimals; ability to compute rate, ratio, percent and basic statistical calculations Must currently be located in the Augusta, GA area and able to start a new position within 1-2 weeks after the interview Must be authorized to work in the U.S. without visa sponsorship (now or in the future) Summary: Responsible for the testing and disposition of raw material, in-process and finished product according to applicable procedures. Performs preparation of solutions and samples, calibration of analytical instruments, and interpretation of statistical analyses/results. Job Duties include: Performs analysis on bulk and packaged final products utilizing methods that comply with regulatory and other requirements (i.e., FCC, USP/NF, EP). Performs analysis on in-process samples to monitor and/or confirm that manufacturing specifications are being met. Participates in SQC charting of control samples; analyzing variations; and troubleshooting when necessary. Assures proper quality control of finished product for shipment and releases material in LIMS (Laboratory Information Management System) and SAP (Inventory Management System). Performs calibration, basic diagnostic, and troubleshooting procedures for laboratory instruments as needed. Generates Certificates of Analysis using the lab computer systems that comply with customer specifications. Assesses Out-of-Specifications (OOS) results, determines the impact on the product, and ensures timely resolution or corrective action as needed. Maintains laboratory supply inventory. Prepares samples along with necessary paperwork for shipment. Maintains historical records by implementing record keeping systems and filing documents. Maintains general housekeeping tasks to ensure a clean and organized work area; performs all activities in a safe and conscientious manner. Work Environment: The work environment requires normal safety precautions typical of such places as laboratories, offices, meeting and training rooms. Requires use of safe work practices with office equipment, avoidance of trips and falls, observance of fire regulations and traffic signals, etc. Generally, the work area is well lit, heated and ventilated. Environment may include work that requires special safety precautions such as working with irritant chemicals, around moving parts, carts or machines. Employee may be required to use protective clothing or gear such as masks, gowns, coats, safety shoes, boots, goggles, gloves, safety glasses or shields.

“Let goodness, fairness, and most importantly, love prevails in business; profits will inevitably follow.” - NK Chaudhary, founder Jaipur living is a socially conscious luxury brand with a passion for people, products, and design. A differentiated challenger brand, Jaipur Living is known for its beautiful rugs and textiles. Jaipur Living products can be found in the finest homes, and the company prides itself in providing only the highest quality products, a transparent and ethical supply chain, and distinctively thoughtful customer experience, with personalized support and custom offerings. Headquartered in a northwestern suburb of Atlanta, Jaipur Living designs, manufactures, and distributes rugs and other textiles through its extensive network of high-end interior designers and design firms, national retailers, and third-party e-commerce partners. The company continues to grow rapidly, experiencing double-digit annual growth every year for the past decade. This growth can be attributed to the care Jaipur Living puts not only in its customers but its employees as well. Employees at Jaipur Living are encouraged to collaborate, think independently, and stretch the creative process to develop new ways of marketing and distributing their products around the world. In August 2022, the company opened a new studio adjacent to its headquarters that, at over 17,000 square feet, functions as a communal space for design professionals to visit to experience Jaipur Living's products. The studio encapsulates not only our beautiful product but also the ways Jaipur makes lives beautiful through The Jaipur Rugs Foundation. What we do for our team members: Give competitive benefits and salaries Provide a friendly and professional work environment Maintain a modern, sleek facility, which complements our attitudes and desires Create opportunities for growth inside the company Give access to an on-site basketball court and gym complete with a yoga studio and showers Encourage employees to collaborate over an organic community garden Create employee events that build relationships and just have some fun! Our Values Empowerment • Inclusiveness • Responsibility • Progressive Learn more about our company story here: **************************************************** The Jaipur Rugs Foundation Since 2004, the Jaipur Rugs Foundation has worked to improve the lives of rug-weaving artisans in India. This is done through training, skills development, and social interventions. By focusing on the ideas and solutions that create social value, the Foundation supports the dignity and heritage of these traditional artisans, believing that healthy and sustainable communities are key to the survival of traditional rug weaving. Jaipur Living has made ethical and socially conscious global citizenship the foundation of its business. Through social initiatives and the Jaipur Rugs Foundation, the company supports a supplier ecosystem without a middleman of more than 40,000 artisans in 700 villages across India by providing them with a livable wage, access to health care, leadership education, and opportunities for personal growth and development. Combining time-honored techniques and of-the-moment trends, every Jaipur Living product is as ethically and responsibly made as it is beautiful. Learn more about the Jaipur Rugs Foundation here: *************************** Overview The Quality Control Technician will be a key member of the US Supply Chain team, collaborating and communicating with receiving, customer success, sales, inventory planning and other departments. The Quality Control Technician is responsible for supporting the execution of quality inspection processes and procedures by physical inspections. Ultimately the goal is to provide our customers with a high quality, beautiful product. This is the perfect role for someone who likes a combination of physical and mental work! What You Will Be Doing: Collaborate with customer success, sales, receiving and overseas teams to identify and correct quality issues. Maintain an ongoing list of problem vendors and problem items. Facilitate protocol for reviewing receipts of these items until all issues are resolved. Works under general supervision to perform routine product inspections related to labeling, packaging, color and size quality issues, following the relevant company's Standard Operating Procedures (SOP's) and methods. May be required to receive, sort, log issues into master qc log and prepare and apply labels Demonstrates good and safe work habits and enforces a clean working environment. May be required to archive, return, or dispose of inspected inventory as per the established procedure Will be required to operate warehouse machinery used for the purpose of re-stocking inspected inventory. Skills & Minimum Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. High School Diploma or equivalent is required Self-motivated and able to work independently when necessary Excellent relationship-building, and communication skills Strong organizational skills with attention to detail. Problem solving skills Proficiency with Microsoft Office Suite (Word, Excel) Physical Requirements: While performing the duties of this job, the employee is regularly required to sit; use hands to finger, handle, or feel; reach with hands and arms; and talk and hear. The employee must be able to stand, walk, bend, squat and crawl. The employee must frequently lift and/or move up to 20 pounds. Ability to react quickly to sounds. Work in an environment with varying temperatures. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. Must be able to take directional cues directly and indirectly. Employment at Jaipur is contingent on the completion of a criminal background check and a drug screen, with the results being negative. Jaipur employees are subject to pre-employment, post-injury, post-accident, reasonable suspicion, and random testing for illegal drug usage. Management retains the discretion to add or change the duties of this position at any time. Management retains the discretion to add or change the duties of this position at any time.

Johnson Service Group (JSG) is a nationally recognized professional staffing and recruiting firm that is looking for an experienced Environmental Laboratory Analyst to fill a contract assignment in Atlanta, Georgia. Job Title: Environmental Laboratory Analyst Work Location: Atlanta, GA 30339 Requirements LABORATORY TECHNICIAN Education Some college preferred (Science based studies preferred) PPE Equipment Knowledge & Skills Safety glasses, long pants, closed toe shoes, and neoprene gloves (as needed). Experience: Experience in a National Environmental Laboratory Accreditation Conference (NELAC) or highly regulated laboratory environment preferred. Experience in the Sample Receiving department of a high-volume laboratory. Wet chemistry experience preferred (pH, ammonia, alkalinity, turbidity, etc…) Handling and preparing environmental samples for analysis according to EPA, ASTM, or other protocols. Key Responsibilities: Work safely, identify and implement corrective actions for unsafe working conditions. Receive and log-in samples to our Laboratory Information Management System (LIMS) for analysis. Prepare inorganic and organic samples for analysis using a variety of laboratory instrumentation and analytical methodology. (EPA and ASTM), as needed. This can include, but isn't limited to preserving samples with acid, etc… Order and maintain the appropriate number of sample bottles and/or containers for environmental sampling. Perform routine laboratory housekeeping and assist Laboratory Analysts on an as needed basis. Perform miscellaneous administrative duties such as supply inventory and ordering, organization, peer review of data entry, etc… Support customers with filling sample container orders, coordinate sample sub-outs, contact customers as needed to ensure accuracy and clarity with requested analysis. Abilities: Must have excellent Communication and Interpersonal Skills. Ability to interface with a variety of internal/external work groups and plant personnel. - Must have computer proficiency utilizing Microsoft Office suite (Excel, Word, etc…), instrument and data management software. Understanding of OSHA laboratory safety requirements under 40 CFR 1910. This position requires personal protective equipment This position may require some bending, lifting, climbing, prolonged sitting, prolonged walking, walking on gravel or crawling when necessary. JSG offers medical, dental, vision, life insurance options, short-term disability, 401(k), weekly pay, and more. Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law. #D650

Who are we? At Scalian, we are a leading multinational engineering consulting firm with 5,500 specialists and over 30 years of experience. We are specialized in Industrial Performance (Quality Assurance, Supply Chain, and Project Management) and Digital Systems (IT & Software and Systems Engineering). Our expertise serves various technological sectors such as the aerospace, defense, rail, and energy industries while providing distinctive support to their development and operations. Are you an experienced Quality Controller? If your answer is yes, it's your lucky day as we are looking for a dynamic and talented person to join our team in the US! What will your role be? As a Quality Controller, you'll play a vital role in ensuring products, components, and processes conform to established quality and regulatory standards. This position is heavily focused on hands-on product control work, documentation accuracy, and clear communication across teams. You will be responsible for ensuring detailed inspections, identifying nonconformities, issuing corrective action reports, and ensuring compliance with technical requirements. Activities: Identify, document, and classify nonconformities; generate Nonconformance Reports (NCRs) with clear, detailed descriptions Create and issue Corrective Action Requests (CARs), ensuring problem statements are accurate and actionable Collaborate with internal teams to support root cause analysis and ensure corrective actions are implemented effectively Maintain accurate inspection records, traceability documentation, and quality logs Communicate inspection results, quality issues, and required corrective actions clearly to production, engineering, and supplier teams Verify compliance with customer specifications, regulatory requirements, and internal quality procedures Support audits and process verification activities as needed Escalate significant quality risks promptly and participate in establishing containment measures Be adaptable to additional inspection-related tasks or changes driven by business needs What skills and qualifications are we looking for? Associate degree or certification required, preferably in Quality Assurance, Manufacturing, or a technical field Inspection Authorization (IA) holder strongly preferred Minimum of 3 years' experience in Quality in a manufacturing, aerospace, or similar regulated industry Strong understanding of inspection methods, measurement tools, and quality documentation practices Ability to write clear, accurate NCRs and corrective action documentation Excellent communication skills with the ability to convey inspection findings and requirements effectively Flexibility, strong attention to detail, and initiative to drive effective quality solutions Work environment typically quiet with occasional moderate noise levels Why join us? To acquire experience in different critical industries and projects while working for the same company; To have a competitive salary and a great benefits package To access trainings that focus on expanding your knowledge while staying up to date with cutting edge technologies and best practices; To have a clear career development plan that suits your goals; To have the possibility of working abroad through our mobility program thanks to our international presence; To join a dynamic, specialized and fast-growing group where communication is key and where every team member is valued. To be part of a team where having fun is essential.

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not Required Job Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. We have an opportunity for a Quality Technical Team Member to be based in Columbus, GA. (onsite role) What You Will Do: * Records for Blades and Disks: * Input and store Columbus Forge LPA records. * Maintain inventory and storage of Level 4 documentation records for Columbus Operations. * Log and ballot Columbus Forge quality procedures, standard work, and forms for Columbus Operations. * Check Level 4 documentation records in and out of SharePoint for maintenance by operational functional teams. * Other duties as assigned. * Compile and distribute results of the LPA audits to operational Business Unit Leaders. * Run CAR status reports for Tier 4 meetings for Operations Leadership. * Generate communication for Toolbox Talks delivered to employees to inform the workforce of key issue awareness. * Process and Expedite Level 4 Documentation Ballots with operational teams. * Process and expedite Level 1 through Level 3 documentation ballots with operational teams. * Support Level 4 Documentation TPM with executing and expediting reviews and input, as requested. * Perform 6s each shift * Engage in process optimization to allow success of production/quality goals while achieving and maintaining cost savings * Complete all training within the expected time given Qualifications You Must Have: * HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline * Minimum of 1 year of relevant work experience Qualifications We Prefer: * Experience in manufacturing environment * Quality assurance or quality control experience is a plus What We Offer: * Medical, dental, vision and life insurance * Short-term disability, long-term disability and parental leave * 401(k) match * Flexible spending accounts * Employee assistance program * Employee Scholar Program (No waiting period!) * Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

The Quality Assurance Associate helps set up and run quality management systems to make sure that the organization's products and services meet both internal and external standards. The person who gets the job will work with people from different departments to make sure the company follows the rules, do inspections, and push for continuous improvement. Main Duties: Check that products and processes meet quality standards by doing regular inspections, audits, and tests. Write down and report quality problems, deviations, and non-conformances; help with finding the root cause and taking corrective action. Help create and keep up-to-date standard operating procedures (SOPs), work instructions, and quality documents. Help with audits inside and outside the company, including planning, carrying them out, and following up. Keep an eye on and analyze quality metrics, and then make reports to share what you've found and suggest ways to make things better. Work with the production, engineering, and regulatory teams to solve quality problems and put best practices into action. Stay up to date on the rules, standards, and new developments in quality assurance in your field. Required: A bachelor's degree in a related field (like science, engineering, or quality management) or the same amount of work experience. 1-3 years of experience in quality assurance or a similar job, preferably in a regulated field like food and drink, pharmaceuticals, medical devices, or manufacturing. Good analytical and attention-to-detail skills. Knowledge of ISO standards, Good Manufacturing Practices (GMP), and quality management systems (QMS). Good written and spoken communication skills. Able to use Microsoft Office Suite and quality management software well. Annual Salary: $55,000 to $75,000. Benefits: Full health insurance (medical, dental, and vision) and a 401(k) plan with employer matching Paid time off for sick days, vacations, and holidays Insurance for life and disability Program to help employees Opportunities for training and professional growth

About Us Apollo is a Mission-Critical Infrastructure Engineering, Construction, Commissioning, and Operations Support Services Company. We serve mission-critical industries globally with commissioning, emergency response, operations support, and owner's representative services. Apollo is currently executing projects in multiple states in the United States, in Canada and Brazil. Since our inception, we have built a commissioning firm based on trust, one relationship at a time. We hire the best people who can handle critical systems, love challenges, and thrive in a dynamic environment. We focus on understanding each client's needs and are relentless in meeting them. Job Description The Data Center Construction QAQC Co-Op Engineer (CxE-C) provides construction management, quality assurance and quality control support during the delivery of mission-critical data center facilities. They also participate in the supply chain coordination, inspection and validation of mechanical and electrical components, ensuring that delivered components meet the required specifications before installation and commissioning. The QAQC-C partners with senior team members, project managers, construction contractors, equipment vendors, and client staff to monitor and ensure adherence to project specifications, quality standards and timelines throughout the construction process. The QAQC-C provides construction support as part of Apollo's onsite, client-facing teams. Thus, this role may involve approximately 75% or more travel to various client locations. Education Relevant coursework towards a bachelor's or associate degree in engineering, construction management, supply chain & logistics, or a related discipline OR One year of experience in the supply chain coordination, inspection, validation, and quality control of mechanical and/or electrical systems in a construction environment. Key Responsibilities Support the review of construction plans and design specifications to help identify quality and compliance requirements. Collaborate with project managers and suppliers to ensure timely delivery and installation of electrical and mechanical components. Work with the QAQC team to identify and address potential risks or areas for improvement during project execution. Help prepare and maintain detailed documentation of inspections, tests, and quality reports for project teams. Conduct pre-installation inspections under the guidance of senior QAQC team members. Achieve certification for NFPA70E, OSHA 30, and other training as required. Travel to other project locations as required. Perform other duties as assigned. Physical Demands The following physical demands must be met to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions: Frequently manipulating, moving, or grasping small parts, devices, or tools. Frequently required to remain in a stationary position. Frequently moving through office areas, critical facilities and other environments, including tight and confined spaces. Exposure to low/high temperatures and outdoor elements such as precipitation and wind. Working and walking on different types of terrain on active construction sites (e.g., concrete flooring, gravel, unpaved roads). Frequently ascending and descending stairs and ladders to access equipment. Frequently positioning oneself under or over equipment. Frequently moving equipment weighing up to 50 pounds. Qualifications Basic knowledge of mechanical and electrical systems in construction Strong communication and collaboration skills to work with cross-functional teams, including project managers and contractors Skilled at using MS Office tools. Ability to analyze and prepare reports and technical documents. Ability to work under pressure and meet critical deadlines. Must be detail oriented. Prerequisites for Employment: Successful Background Check including pre-employment drug screening US citizens, permanent residents or any candidate with eligibility to work in the US Graduating in May 2027 or later Apollo challenges the brightest, most talented, and driven individuals in the industry by providing an environment that embraces initiative, diversity, and achievement. We are an Equal Employment Opportunity, Affirmative Action employer supporting women, minorities, veterans and people with disabilities. We participate in the Department of Homeland Security E-Verify program.

TempToFT Testing Solder Paste batches in the lab. Will also be handling packing slips, BOL and sometimes dealing with shipping companies. Must have Microsoft Office experience, Excel, Word. Looking for someone that will be punctual in attendance and deadlines. Must be a team player. 1965 Evergreen Blvd. , Suite 400, Duluth, GA 30096, United States of America

What we offer Explore a world of opportunities with us. Look ahead with us and help shape innovative solutions to make our world more sustainable and life healthier, more vibrant and more comfortable. At Evonik, you have the chance to explore, thrive, and grow alongside 33,000 colleagues. Among attractive career paths and high-quality development programs, we not only offer performance-based remuneration and occupational health benefits but also hybrid and flexible working environments with #SmartWork. Bring your fresh perspective, develop your strengths, break out your mold, and find a career that fits your dreams with us. Click on the link below to learn what our employees have to say about Evonik: ************************************************** This position is responsible for conducting routine microbiological testing, documentation, and data analysis, of utilities, raw materials, facilities and equipment. Additionally, the microbiology technician will be responsible for upkeep of the laboratory, laboratory supplies, and other various routine laboratory tasks. Responsibilites: Has a sound understanding of the skills required to perform the following routine activities: Environmental Monitoring - Monitoring of Classified Areas using a) active/passive air sampling methods and RODAC/swab surface sampling methods for the detection of bacteria and fungi; and b) CliMet air sampling methods for the detection of Total Particulates; trending of this data to detect anomalies, and characterize the transient and resident microflora. Utilities -Testing of a) city water for total microbial count and the absence of enteric organisms; b) pre-treat water, clean steam and Water for Injection for total microbial count and presence of endotoxins; and c) nitrogen and process air for total microbial count and total particulates. Utilizes classical microbiological methods for the identification of microorganisms. Perform validation activities such as biological indictor recovery, bioburden rinse/swab, endotoxin rinse and endotoxin challenge vial testing. Data analysis and entry into software systems such as Microbiology Information Management Systems (MIMS). GMP Documentation - Document test results and conclusions in a GMP manner. Ensure test forms are complete before submission for approval. Performs responsibilities in compliance with Evonik quality systems. Adheres to all company safety, health and environmental policies, procedures and directives. Conducts all laboratory activities in a safe manner by use of MSDS to establish chemical hazards, observes the appropriate laboratory procedures and reports all incidents that could threaten the safety of laboratory personnel Requirements: Bachelor's degree in microbiology, biological sciences, or related field of study Minimum 1 yr. experience in a clinical, academic, or industrial/pharmaceutical microbiology laboratories. Experience in microbiological assays and testing. Desired experience in environmental monitoring and trending. Desired experience in the testing of utilities. Excellent written and verbal communication skills. Excellent organizational and leadership skills. Proficiency in Good Laboratory Practices (GLPs) and Good Manufacturing Practices (GMP). Excellent computer skills including experience with spreadsheets and databases. Ability to use a respirator. Ability to work with microorganisms and hot liquids. The Evonik Group adopts an Equal Employment Opportunity (EEO) approach. Candidates are assessed based on their educational qualifications, experience, job competencies and potential and shall not be discriminated against on the basis of race, ethnicity, age, gender, religion, nationality, disability or sexual orientation or other classifications protected by local, state, or provincial regulations. Your Application To ensure that your application is proceeded as quickly as possible and to protect the environment, please apply online via our careers portal. Further information about Evonik as Employer can be found at *************************** Please address your application to the Talent Acquisition Manager, stating your earliest possible starting date and your salary expectations. Your Talent Acquisition Manager: Kelvin Seals [C] Company is Evonik Corporation

Country: United States of America Onsite U.S. Citizen, U.S. Person, or Immigration Status Requirements: U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. Security Clearance: None/Not RequiredJob Description Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. We have an opportunity for a Quality Technical Team Member to be based in Columbus, GA. (onsite role) What You Will Do: Records for Blades and Disks: Input and store Columbus Forge LPA records. Maintain inventory and storage of Level 4 documentation records for Columbus Operations. Log and ballot Columbus Forge quality procedures, standard work, and forms for Columbus Operations. Check Level 4 documentation records in and out of SharePoint for maintenance by operational functional teams. Other duties as assigned. Compile and distribute results of the LPA audits to operational Business Unit Leaders. Run CAR status reports for Tier 4 meetings for Operations Leadership. Generate communication for Toolbox Talks delivered to employees to inform the workforce of key issue awareness. Process and Expedite Level 4 Documentation Ballots with operational teams. Process and expedite Level 1 through Level 3 documentation ballots with operational teams. Support Level 4 Documentation TPM with executing and expediting reviews and input, as requested. Perform 6s each shift Engage in process optimization to allow success of production/quality goals while achieving and maintaining cost savings Complete all training within the expected time given Qualifications You Must Have: HS diploma (or equivalent, e.g. G.E.D. in the US) or vocational/technical education in related discipline Minimum of 1 year of relevant work experience Qualifications We Prefer: Experience in manufacturing environment Quality assurance or quality control experience is a plus What We Offer: Medical, dental, vision and life insurance Short-term disability, long-term disability and parental leave 401(k) match Flexible spending accounts Employee assistance program Employee Scholar Program (No waiting period!) Paid time off including: 3 weeks of vacation, 5 personal sick days, 3 unpaid days for unique situations at supervisor discretion, and 12 paid government holidays What is my role type? In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Onsite: Employees who are working in Onsite roles will work primarily onsite. This includes all production and maintenance workers, as they are essential to the development of our engines. Candidates will learn more about role type and current site status throughout the recruiting process. For onsite and hybrid roles, commuting to and from the assigned site is the employee's personal responsibility. As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement.Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance.This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply.RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act. Privacy Policy and Terms: Click on this link to read the Policy and Terms

**Note:** requires call-out and overtime as needed and working a 10 hour day.** + **Candidates must be available for evenings or nights, overtime, weekends, and holiday work as required.** **Job Description:** + Prior experience and knowledge of boiler/water analysis preferred. + Previous work experience in a water treatment plant preferred. + Experience and competency in the use, calibration and maintenance of laboratory instrumentation/equipment. Knowledge of proper analytical methods and techniques. + Previous experience in an industrial or manufacturing environment preferred. + Familiarity with mechanical parts and repair is preferred. + Knowledge and experience in production of deionized water is preferred. **Education:** + BS degree in Chemistry or other field of science with a MINIMUM of 12 semester hours in Chemistry required. **About US Tech Solutions:** US Tech Solutions is a global staff augmentation firm providing a wide range of talent on-demand and total workforce solutions. To know more about US Tech Solutions, please visit *********************** (*********************************** . US Tech Solutions is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, colour, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

At GE Aerospace, we believe that the world works better when it flies. We lead that world in the development and manufacture of advanced jet engines, components, and integrated systems that power commercial and military aircraft. Join us and you join a collaborative, diverse team of individuals who are bringing unique perspectives, innovative spirit, intense drive, and curiosity to the job every day. You'll be part of an on-going LEAN transformation that helps all of us work smarter, not harder. And because our work really matters to millions of people, you'll share in our sense of purpose and pride. Working at our Huntsville Location When it comes to the materials that create exceptional ceramic components, our facility in Huntsville is the major leagues. We're producing Hi-Nicalon TypeS SiC Fiber as well as SiC pre-preg tape in an advanced technology, LEAN manufacturing environment. Join this diverse team of 250+ collaborative employees and every day can be a learning experience. Completed in 2017, this 100-acre campus offers a safety-first, secure workplace where you can perform at your best. Here are just a few additional reasons you will want to consider us: * Do work with a real purpose helping to solve the global challenge of how the world flies more sustainably. * Be a part of a global workforce of diverse backgrounds, perspectives, ideas, and experiences where everyone feels supported and respected. * Earn merit-based rewards and incentives. * Work in a climate-controlled building out of the elements. * Have opportunities for continuous learning and development Essential Responsibilities * Operate process units to produce chemical intermediates for aviation Ceramic Matrix Composites raw materials * Monitor various chemical process measurements and respond to deviations * Serve as a resource to other technicians in trouble shooting and identifying equipment issues * Conduct routine maintenance and operation of process systems and equipment across assigned process zone and occasionally in cross functional areas * Conduct work practices with safety and quality in mind in a 24/7 production environment * Complete required business and regulatory process documentation * Maintain a safe, clean, and organized work environment * Be responsible for ensuring facility equipment and inventory/consumable levels are accurate * Participate and actively engage in quality and continuous improvement projects * Communicate effectively with peers, management, & external stakeholders * Must be able to work in second shift/night shifts. * Utilize business software such as ERP and quality/EHS software * Other duties as assigned Qualifications/Requirements * High School Diploma/GED * Minimum of 3 years' experience in a Chemical Plant environment or Associates Degree of Applied Science in Advanced Manufacturing - Process Technology (or equivalent) Eligibility Requirements: * Ability and willingness to work off/varied shift/weekends, as required Desired Characteristics * Mechanical/Electrical aptitude * Ability to analyze problems, identify issues and provide efficient solutions * Basic Computer skills (MS Word, Excel, Outlook) * Self-starter * Strong organizational skills * Ability to handle diverse activities simultaneously * Ability to work in a team environment * Ability to work in a tobacco free environment * Ability to communicate effectively and adhere to team norms This role requires access to U.S. export-controlled information. Therefore, employment will be contingent upon the ability to prove that you meet the status of a U.S. Person as one of the following: U.S. lawful permanent resident, U.S. Citizen, have been granted asylee or refugee status (i.e., a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)). Additional Information GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

Job Details Sylacauga - Sylacauga, AL Full Time 4 Year Degree Day ManufacturingDescription The Quality Control Chemist will play a crucial role in ensuring the excellence and consistency of our chemical products through rigorous testing and analysis. Position is full-time at the Sylacauga, AL plant laboratory reporting to the Director of Quality and Process Chemistry. (approximately 40 hours): Monday through Friday with flexibility to work additional hours and different schedules during peak customer demand times. Essential Duties & Responsibilities Conduct Quality Control Testing: Execute a variety of chemical and physical analyses on raw materials, intermediates, and finished products to guarantee compliance with established quality standards. Utilize analytical instrumentation, including but not limited to ICP-OES (Inductively Coupled Plasma Optical Emission Spectroscopy), HPLC (High Performance Liquid Chromatography), Gas Chromatography, Karl Fisher, Viscometer, Specific Gravity, and pH to perform quantitative and qualitative analyses. Perform method validation and verification for new testing methods in the laboratory. Data Analysis and Troubleshooting: Perform data analysis, identify trends, and troubleshoot issues, taking corrective actions as necessary. Compliance and Approval Checks: Ensure products meet specifications and conduct final product approval checks. Confirm label claims adhere to quality control specifications. Documentation, Record-Keeping, and Quality Assessment: Maintain meticulous and precise records of all testing procedures, results, and any deviations from anticipated outcomes. Generate Certificates of Analysis (CoA) for each product batch, providing comprehensive documentation of quality specifications. Assess daily quality parameters and quality systems, covering cross-checks, raw materials, calibration, maintenance, procedures, training, auditing, and oversight of analytical testing. Document standard operating procedures and identify trends in testing results using data analysis from daily result entries. Training and Support: Train new quality chemists, and provide technical support to stakeholders, investigating quality problems and implementing actions to follow up. Troubleshoot and Investigate: Identify and investigate any discrepancies from quality standards, collaborating with production and relevant departments to promptly resolve issues. Handle basic issues and problems under direct supervision, escalating more complex issues to appropriate staff. Continuous Improvement: Participate in continuous improvement initiatives by suggesting and implementing enhancements to existing testing methods and processes. Compliance and Safety: Guarantee that all quality control activities adhere to industry regulations and safety standards. Contribute to maintaining a safe, clean, and orderly laboratory environment. Other duties - Perform additional duties as assigned. Qualifications Qualifications Proficient understanding of analytical techniques and instruments. Exceptional attention to detail and accuracy in documentation. Ability to work independently and collaboratively in a team setting. Strong communication skills with the ability to convey complex information clearly. Education/Experience Bachelor or Master's degree in Chemistry or related field. 2+ years' work experience in plant nutrition formulation/development desired. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. Prolonged periods sitting at a desk and working on a computer. The employee is occasionally required to stand, walk, reach with hands, and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to fifty pounds. The vision requirements include close vision and ability to adjust focus. Employees must be able to stand for extended periods of time. Working Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will primarily be in a laboratory setting onsite, with occasional plant walk throughs to assist in quality related matters. The noise level in the work environment is typically minimal, with normal chemical manufacturing duties occurring daily. The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Laboratory Analyst Division: Water Treatment Plant Salary: $43,298.77 Hourly Rate: $20.82 Department: Utilities Pay Grade: 14 This position is responsible for performing regular chemical, bacteriological, and microscopic examinations of water and wastewater samples. * Collects and analyzes influent and effluent samples. * Performs laboratory analyses of water and wastewater samples. * Ensures compliance with quality control standards. * Prepares reports for the Superintendent and regulatory agencies. * Sets up, cleans and calibrates laboratory equipment and instrumentation. * Maintains discharge monitoring reports and supporting documentation. * Assists other divisions with sample collection and laboratory analysis as needed. * Assists in the collection and shipping of samples for pollutant scans and toxicity testing. * Repairs and maintains laboratory equipment. * Assists with after-hours emergencies when needed. * Attends required training classes. * Performs related duties. Qualifications * Knowledge of federal, state, and local laws and regulations pertaining to analytical procedures. * Knowledge of water or wastewater treatment principles and practices. * Knowledge of chemistry. * Knowledge of the maintenance and calibration of laboratory equipment. * Knowledge of federal, state, and local laws and regulations pertaining to sample collection and laboratory procedures. * Knowledge of data analysis and records management principles. * Skill in the collection, analysis, and interpretation of water samples. * Skill in the operation and maintenance of laboratory equipment. * Skill in planning, organization, and decision making. * Skill in the collection and analysis of data and in the preparation of reports. * Skill in oral and written communication. * Knowledge and level of competency commonly associated with completion of specialized training in the field of work, in addition to basic skills typically associated with a high school education. * Sufficient experience to understand the basic principles relevant to the major duties of the position usually associated with the completion of an apprenticeship/internship or having had a similar position for one to two years. * Possession of or ability to readily obtain state certification as a water or wastewater analyst as appropriate. Applications Please complete a City of Valdosta Application form and email it to ********************** to be considered for the position you are interested in applying for. An application must be submitted for each position you are interested in. A resume and cover letter may be attached as additional information only. You may apply in person at the City of Valdosta Human Resources Department, 216 East Central Avenue, Valdosta, GA 31601. Sorry, no phone calls, please. The City of Valdosta offers a competitive salary with an excellent benefits package. The City is an Equal Opportunity Employer and an E-Verify employer. For more information, go to **********************************************************

Why are we proud of what we do at allnex? We create coatings, products which help protect the world for all nex>t generations - and that's exactly what you can do joining us! Imagine how fast your smartphone would become scratched-up, ugly and unusable without a coating. Or an e-bike, the cabin of a train, a beautiful wooden floor, and countless other things in life. Making objects and their surfaces more attractive and longer-lasting means making them more sustainable, and that's a huge part of what working at allnex is about. No matter which role you step into, you'll become part of a global team of passionate people who care deeply about the chemistry, quality, and global impact of coatings. You'll also join a highly multicultural and diverse team of more than 4,000 employees in four regions who - as part of one of the world's leading coating resins companies - serve customers in over 100 countries across the globe. Click here to see why we are proud of what we do in allnex! For a sneak peek into life at allnex site, don't miss our manufacturing Operator Movie! Position overview Are you passionate about hands-on support for customers and helping them find innovative solutions that make a real impact? We are seeking a Technical Service & Business Development Chemist to serve the printing and packaging markets, specializing in inks and coatings based on energy curable, waterborne, and solventborne chemistries. In this role, you will work directly with customers to solve technical challenges, influence product selection, and support new product introductions that drive commercial success. You'll spend significant time in the lab preparing formulations, conducting application testing, and benchmarking performance, while also traveling to customer sites and industry events to provide on-site technical support and build strong relationships. If you thrive on making a difference through both laboratory work and customer engagement-and want to be part of a collaborative, innovative team-we want to hear from you! Responsibilities * Provide hands-on technical service and formulation support for printing and packaging applications (inks and coatings), focusing on energy curable, waterborne, and solventborne technologies. * Plan and execute laboratory work, including formulation development, application testing, and performance benchmarking to address customer and market needs. * Engage directly with customers through on-site visits, technical discussions, and virtual meetings to understand challenges and deliver solutions. * Travel to customer sites, industry events, and internal meetings (up to 30%) to provide in-person technical support and strengthen customer relationships. * Collaborate with Sales, Marketing, and R&D teams to support product selection, troubleshooting, and new product introductions for printing and packaging markets. * Translate customer requirements into actionable development briefs and contribute to technical value propositions and launch materials. * Monitor market and technology trends in printing and packaging to identify innovation opportunities and guide portfolio development. * Represent allnex as a technical expert at conferences, trade shows, and customer forums within the printing and packaging sector. Required skills and experience * Minimum 5 years of hands-on formulation experience in coatings or inks for printing and packaging applications. * Strong working knowledge of waterborne, energy curable, and/or solventborne chemistries. * Proven ability to work independently in a laboratory setting, including formulation development, application testing, and performance benchmarking. * Demonstrated success in engaging with customers to understand technical needs, troubleshoot issues, and deliver effective solutions. * Willingness and ability to travel up to 30% for customer visits, technical support, and industry events. * Strong communication skills, with the ability to clearly present technical information to both technical and non-technical audiences. * Proficiency in experimental design, data analysis, and technical documentation. * Team-oriented mindset with the ability to collaborate across functions (Sales, Marketing, R&D) and influence outcomes. * Fluent English skills, both written and verbal, required Qualifications * Bachelor's degree in Chemistry, Chemical Engineering, or a related scientific field required; Master's degree preferred. * Strong foundation in formulation science and application testing for coatings and/or inks. * Knowledge of polymer chemistry, surface chemistry, or radiation-curable systems is a plus. * Experience with printing and packaging technologies or materials is highly desirable. * Equivalent technical experience in lieu of formal education may be considered. We offer We are proud to offer an international working experience with a tight-knit network of employees, making it easy to connect and learn from people all across our different functions. On top of that we are a truly innovative company with a strong team spirit, openness to new ideas, and great opportunities to grow and develop your career. Equal Employment Opportunity allnex is proud to be an equal opportunity employer. We celebrate diversity and are committed to an environment where all colleagues contribute for the benefit of our employees, our products, and our communities. Find out how you can make an impact! Check out our careers page for available opportunities. We look forward to hearing from you. ************** Nearest Major Market: Alpharetta Nearest Secondary Market: Atlanta Job Segment: Chemical Research, Scientist, Technical Support, Business Development, Sustainability, Engineering, Science, Technology, Sales, Energy

1st Shift 6AM to 2:30PM M-F *NO Rotating Seeks: Experienced Quality Control for Computer Electronics **INTERVIEW Call ************ M-F 8am to 5pm **Friendly Company *TOUR *HVAC Environment YOUR FREE Benefits Paid By Company SOME QC Electronics Experience Preferred Knowledge of AS9102, AS9100 and Internal Auditing Preferred Tools: Computer / Handheld Bar Code Scanners / Tracking Inventory / Barcode Labeling Background and H.S. Diploma or GED is Required Shorts, Jeans, T-Shorts, Full Shoe (NO Steel Toes) **Have Experience CALL to Interview M-F 8am to 5pm ************

This position will analyze environmental and plant effluent samples for radioactively, including sample preparation, laboratory analysis, counting room activities, and associated quality control tasks. These methods and processes are in support of company facilities that meet or exceed environmental compliance with state and federal regulations. Prepare and analyze environmental and plant effluent samples and interpret results according to operating procedures and applicable standards (EPA, NRC, and ASTM methodology). Education: BS degree in Chemistry, Biology or related science is preferred.

Job Title: Lab Technician (Microbiology) Duration: 06+ Months Schedule: Thursday - Sunday 6 AM to 4: 30 PM or 01: 30 PM to 12: 00 AM (0600 - 1630 or 1330 to 0000) Recommended experience : 0-3 years for Associate level, 4-7 years Intermediate level, and 8+ for Senior level hires OBJECTIVES : Conducts and performs a wide range of biological, chemical and physical analyses on pharmaceutical products (biologics and drugs) through all stages of the manufacturing process from incoming raw materials to finished goods and may include environmental monitoring programs. Position may be applicable to QC Analytical or Microbiological testing, Compliance, QCMIS, or Laboratory Operations. Job Function and Description Identified responsibilities include : Collect samples from manufacturing areas to evaluate environmental classification or critical utility integrity. Conduct critical biological, chemical and physical analyses such as raw materials, initial, in-process and final products, and samples collected from environmental monitoring programs at the company manufacturing facilities, etc. Use sophisticated laboratory instrumentation and computer systems to collect and record data (such as LIMS system). Perform assays requiring precise analytical skills and understanding of biology and chemistry principles. Complete all testing, including special project/protocol testing in a timely and appropriate manner. Initiate and obtain applicable approval for test requests. May maintain inventory/supplies necessary to conduct routine testing. Follow continuous improvement practices (QLP, 5S, LEAN, etc.) Performs equipment maintenance and calibrations as required. Maintain data integrity and ensure compliance with company SOPs and specifications, FDA, GLP, QSR and cGMP regulations. Perform release functions in LIMS or other computerized systems. May perform other duties as assigned. Education and Experience Requirements Typically requires bachelor's degree in chemistry, biological science, or other related technical field. Some related work experience preferred. Microbiology: Environment monitoring, critical utility sampling, endotoxin testing, bioburden for raw materials and in process, process samples, microbial identification and final product sterility testing.

IEH Laboratories, a Leader in Food Safety, is now accepting applications for a Laboratory Analyst - Night Shift position at its facility in Stone Mountain, GA. Ideal candidates will possess the following: - A BS or BA in the biological sciences or related field (required) - Strong attention to detail - Proficiency with data entry and computer applications - Ability to multitask and work in a fast-paced environment - Strong written and verbal communication skills - Strong understanding of aseptic technique in the laboratory Laboratory Analyst duties include analysis of food samples for pathogens via PCR and immunoassay, various microbe enumerations, data entry, laboratory reporting, quality control, media preparation, and other duties as assigned. This is a full-time position and is eligible for standard benefits after a brief waiting period. The schedule for this position is on a rotating shift basis: the first week is Wednesday-Thursday, from 7:00pm to 7:00am; the second week is Monday-Tuesday and Friday-Sunday, from 7:00pm to 7:00am. Due to exposure to various food allergens in the laboratory environment, applicants with moderate-to-severe food allergies are discouraged from