Quality control analyst jobs in Greensburg, PA - 56 jobs

Essential Job Functions/Responsibilities: Manufacturing firm is searching for a qualified candidate to perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components. Experience in working with the following codes/standards: ASME, AWS, ISO and other standards are desired. Job requires potential overnight travel and will require off shift work. Adherence to safety procedures/guidelines at all times. Maintain safety precautions at all times. Keep work area in a clean and orderly condition. Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results. Perform NDE Examinations in conjunction with receipt and in-process inspections on material purchased for use in fabrication. Familiar with the tools and equipment and shall have demonstrated proficiency in their use. Capable of determining the calibration status of inspection and measuring equipment is in proper condition for use, and that inspection, examination and test procedures are approved. Capable of assisting production in the set-up of material and/or components for receipt inspection, as required. Train other individuals as required by management. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Supports: Quality Control Manager, Shop Managers, Quality Control Supervisor, Production Supervisors, Product Line Managers Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school. Preferred: 1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in two or more of the following NDT Methods that will be utilized: Visual Examination (VT) Liquid Penetrant (PT) Magnetic Particle (MT) Radiographic (RT) Ultrasonic Testing (UT) Preferred candidate will be a Certified Level II Visual Examination (VT), Liquid Penetrant (PT) and Magnetic Particle (MT) Required Licenses or Certifications: Valid Driver's License Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience.

Logistics QC Coordinator RIDC Park - Pittsburgh, Pa The Logistics QC Coordinator is an onsite position at our Long Term Care Pharmacy. It is a second shift positon between the hours of 1-8:30pm EST. This position is focused on quality, process, and controls to ensure all packages leaving Grane are following company policy. A critical component of this role is to provide logistical support for all pharmacy prescriptions being delivered throughout the country. Components of this job role will incorporate process improvements, quality review of all created shipping packages and courier accountability. The Logistics QC Coordinator will report to the Director of Procurement. KEY RELATIONSHIPS The Logistics QC Coordinator reports directly to the Director of Procurement. This position works in a shared services environment, which includes customer service, order entry, and pharmacists. This position works with team members and management in Pharmacy Operations, Customer Experience Team, Consultant Nurses, Billing, and Inventory. This position also works with the management team. Responsibilities ESSENTIAL DUTIES AND RESPONSIBILITIES Participates in the creation of CMS packages. Scans prescriptions to generate a shipping label and place medications inside of envelope/package. Quality control check of all completed prescription packages to ensure the right medication with the right paperwork matches the outside prescription label. Ensures all printers utilized in the shipping area are serviced, in working order and supplies ordered timely. Ensures we have an accurate Excel file showing all packages that leave nightly. Ensures this information is emailed to our couriers nightly with appropriate FedEx tracking numbers. Ensures all boxes leaving daily contain a manifest for the driver to review when opening the package. Organizes and sorts packages to leave on the correct date. Handles all pull form requests to see that the package is pulled and does not leave the pharmacy. Voids label in CMS for accurate post information for the courier. Manages the open manifests within CMS daily and posts so the couriers have all information needed for routes. Manages the 7pm FedEx pickup to ensure all packages make it out timely. Verifies all FedEx labels have the right attributes, fixes and insures contents all match for that market. Insuring all packages over $5,000 when needed. Handles all returned packages and alerts team of return to assess and credit where appropriate. Acts as an onsite resource to review all over/short reports from the courier. Actively searches for missing packages to ensure all packages are attempted/resolved. Participates collegially in the development of new programs, practices and educational activities. Ensures timely completion of maintenance logs and policy documentation. Enhances professional and technical knowledge through seminars and other resources. Maintains consistent communication with Operations Manager regarding area specific initiatives and activities. Positive, professional demeanor is projected through verbal and non-verbal communications. Interpersonal conflicts are resolved using appropriate methods and organizational resources, including but not limited to Employee Assistance Program. Diverse perspectives are acknowledged; language and behaviors are modeled that build inclusiveness in the work environment. Participates in performance improvement activities. Initiative is demonstrated to proactively diagnose and resolve problems. Change is met with positive, supportive behavior. Time off is scheduled to avoid disrupting workflow. Productive work habits are consistently displayed. Accountability for actions and decisions is demonstrated in daily work. Feedback is solicited and accepted in a positive manner. Constructive input is offered to support the production area. Perform light lifting or transporting of company assets. Travel to other sites to provide support, as needed. Duties as assigned. Qualifications EXPERIENCE, SKILLS AND EDUCATIONAL REQUIREMENTS College degree is desired. Minimum 1 year of experience in pharmacy is preferred. Minimum of 2 years' experience in a logistics setting and LTL. Demonstrated experience in budget and staffing management. Proficiency in desktop productivity tools, emphasis on Microsoft Office, including Excel, Word, and Outlook. Exhibits professional demeanor and ability to guide fulfillment technicians through workflow. Exhibits patience and perseverance when working with computer and automation users. Exhibits strong analytical and troubleshooting skills. Exhibits excellent communication and teamwork skills, with a strong user support orientation. Exhibits strong organizational skills and ability to work independently with minimal supervision. ADDITIONAL SKILLS AND REQUIREMENTS Initiative and problem solving skills. Reliability Ability to multi-task, prioritize and manage time effectively. Ability to use good judgment. Attention to detail and accuracy. People skills Teamwork Ability to read, write, speak and comprehend English. Excellent communication skills. Completion of all workflow steps. Ability to work in a fast paced, challenging and technical environment. Reliable and consistent in timeliness, attendance and quality of work. Willingness to work a flexible schedule to accommodate heavy work volumes. Adhering to the core values of the company which include accountability, integrity, making a difference, quality, respect, stewardship, and teamwork. Information contained in this description represents the general nature of work being performed. This is not an exhaustive list of all responsibilities, duties and skills required for the position. Reasonable accommodations will be considered in appropriate circumstances; however, as the nature of an accommodation may vary depending on the needs and desires of an individual with a disability, it is impossible to describe in advance specific accommodations that will be considered. NOTE: Company management reserves the right to amend and revise responsibilities to meet business and organizational needs. eoe fm0418

Orano Med is seeking a detail-oriented QC Analyst to join our Quality Control team. In this role, you will conduct cGMP testing of final products, in-process materials, raw materials, and stability samples. You will maintain laboratories, assist in writing and optimizing methods, perform method validation, and qualify lab equipment as needed. Responsibilities Perform comprehensive testing on final products, in-process materials, raw materials, and stability samples. Execute a variety of testing methods including chromatography, spectroscopy, wet chemistry, and radionuclide assays Complete and review test records with accuracy and attention to detail Report any quality anomalies according to established protocols Perform deviation and laboratory investigations as needed Draft data summaries including Certificates of Analysis (CofA) and stability summary tables Update methods, technical reports, and investigations documentation Prepare testing reagents and maintain laboratory supplies and chemicals Conduct environmental monitoring (EM) sampling, incubation, and testing Assist in validation and/or development of analytical methods and techniques Participate in the qualification of QC laboratory equipment Package and send samples to contract laboratories Additional responsibilities as assigned Schedule: Monday - Friday: 12:00 P.M. - 8:30 P.M.

Kurt J. Lesker Company is seeking a skilled Quality Control Technician to perform inspections and leak checks on our products in accordance with our quality standards. Key Responsibilities: Conduct visual, dimensional, and leak inspections using CMM and other equipment. Verify compliance with engineering drawings and specifications. Complete inspection documentation and maintain logs. Provide guidance to junior inspectors and assist in task assignments. Collaborate with Engineering and Project Management on inspection priorities. Ensure adherence to safety and company policies. Perform other duties as assigned. Qualifications: Required 8-10 years of experience in mechanical inspection, manufacturing, or quality control. Proficient in CMM operations and programming. Skilled in vacuum leak detection, SPC inspections, GD&T, and various inspection stages. Demonstrated leadership or supervisory experience. Strong computer skills and familiarity with quality management systems. Effective verbal and written communication skills. Preferred: Expert-level CMM knowledge. Proficiency in Microsoft Office. Benefits we offer to enhance your lifestyle: On-site gym and Running/Walking Trail Health & Wellness Programs including mental, physical, and financial (on-site yoga, meditation, seminars, flu shots, biometrics screening, annual 5K, waste pick up events, etc.) Comprehensive benefits, including medical, dental, vision, life, and disability insurances Recycling program and electric vehicle plug in station Paid time off 401(k) with employer match Office-wide events Employee recognition programs Kurt J Lesker Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. KJLC is committed to providing reasonable accommodations for persons with disabilities (unless doing so will result in undue hardship). If you need a reasonable accommodation for any part of the employment process, please send an e-mail to our human resources department at [email protected] or call ************** to provide the nature of your request.

The Quality Control Specialist serves as a key member of the Quality Control department for the remedial action team for its Shallow Land Disposal Area site in Parks Township, PA, east-northeast of Pittsburgh. This position supports the Contractor Quality Control System Manager (CQCSM) in implementing the Quality Control program and ensures subcontractor performance is tracked to meet project needs. This position reports directly to the CQCSM. Position Description Responsible for assisting the CQCSM in implementing the Contractor Quality Control (CQC) System. Has authority to recommend stop work when conditions adverse to quality are identified. Review and approve subcontractor submittals, ensuring compliance with requirements identified in the Performance Work Statement, task order Scope of Services, and the CQC Program. Responsible for assisting the CQCSM in implementing the U.S. Army Corps of Engineers (USACE) three-phase control process. Inspect (or oversee inspection of) materials and equipment received on site to assure compliance with contractual requirements. Perform routine Quality surveillances, assessments and audits of work performance as directed by the CQCSM. Oversee subcontractor work performance for compliance with work plans, drawings and specifications. Complete daily QC Reports. Other duties as assigned by the CQCSM. **Requirements** - Minimum of Associates degree or equivalent experience. - Minimum of 5 years of experience, including 2 years of experience in USACE projects is desired. - Current USACE "Construction Quality Management for Contractors" certification, or ability to obtain, is desired. - Understanding of USACE Hazardous, Toxic, and Radioactive Waste (HTRW) Remediation is desired. - General understanding of procurement and construction concepts and principles, and their attendant quality requirements. - Good written, verbal and Microsoft Office skills are required. - USA Citizenship is required. - A person already residing withing commuting distance of Vandergrift, PA is highly desired - Knowledge and application of the USACE Construction Quality Management requirements. - Technical knowledge of the application of procurement and construction practices sufficient to comprehend Quality requirements, including interpreting drawings and specifications. - Experience participating in and supporting quality assessments, surveillances, and audits. - Demonstrated ability to effectively communicate with all levels of personnel across multiple organizations within a construction and remedial action environment. - Desired Skills - Possess effective communication skills. Listens carefully and speaks professionally and clearly in all situations. Is able to create, read, and interpret written information. - Capable of identifying and resolving problems in a timely manner, gathering and reviewing information appropriately. - Adaptable to changes in the work environment, manages competing demands and is able to deal with frequent interruptions, changes, delays, or unexpected events. - Strong writing skills. Good communication, computer and interpersonal skills. Good organization skills and ability to balance oversight of multiple work phases at multiple locations on the project. **Additional Details** Position will be located in Parks Township, Pennsylvania (near Pittsburgh) Requires ability to pass beryllium sensitivity testing blood test. **Essential Functions:** Intermittent sitting, walking, standing, bending, squatting, climbing, kneeling, twisting, and lifting. Lifting requirements limited to 20 lbs. in the form of supplies, drawings, etc. Longest distance carried of 50 feet. Hand manipulation is required for simple grasping, pushing and pulling, and fine manipulation. Right and/or left hands utilized. Occasional need to reach and/or work above the shoulder, for supplies, as well as below the shoulder for same. Must be alert to equipment in the field, there will be occasional travel, will work near construction job site equipment when in the field, occasional need to work near hazardous equipment and machinery, occasional need to walk on uneven ground, exposure to dust, gas or fumes, exposure to noise, extremes in temperature or humidity, and potential work at heights. We help prepare people for new opportunities and challenges. With positions at every level, openings in multiple disciplines, expertise in a range of markets and offices around the globe, we create an environment where you can learn, grow, and thrive. From our competitive benefits program to our Health and Safety initiative of zero workplace injuries, we believe that you'll find a flourishing career here.

WHO WE ARE: Tech Met, Inc. an employee-owned company, is a leader in custom and standard chemical milling. Providing services to the Aerospace, Medical, Military and Commercial markets with precision chemical milling on fabricated components since 1988, we specialize in complex and precise chemical milling for build to print and custom projects on a wide variety of materials. THE POSITION: Our growing company has an opening for a Chemical Milling Support Technician I. The preferred candidate should have experience working in a manufacturing or manufacturing-related position. This position supports chemical milling production operations. This position may involve exposure to hazardous chemicals and requires the wearing of Personal Protective Equipment, which is supplied by the company. This is a full-time position, on daylight operations M-F, at our Donora facility. RESPONSIBILITIES/DUTIES: Etches specified portions of metal parts and materials using immersion equipment, templates, hand tools, and precision measuring instruments Reads and signs off on all requirements of the Job Control Form (JCN) and process specifications to determine etch rate, finished dimensions, and method and sequence of operations Cleans surface of parts and materials to remove contaminants Immerses parts in and out of tanks and measures specified removal using precision measuring instruments May require the operation of overhead cranes and other lifting equipment Performs other duties as assigned Maintains full compliance with Company policies and procedures and conducts all activities in accordance with the Company Code of Conduct REQUIRED SKILLS: Minimum of a high school diploma or a general education diploma (GED) Requires Heavy Lifting of Parts 30lbs + and up to 100lbs with assistance Must be able to read & use a non-metric measuring tape Must be able to count & perform simple mathematics (addition, subtraction, multiplication, & division) Must be able to read & use precision measuring equipment, including calipers, thickness gauges, and micrometers. Previous experience operating cranes, a forklift and/or pallet jack a plus Position requires various schedules when necessary, including weekend hours and/or evening WHAT WE OFFER: Competitive pay rates Paid vacation Medical, dental and vision benefits Short Term / Long Term disability benefits AFLAC supplemental insurances 401(k) / ESOP retirement plans Tuition reimbursement program Tech Met is an Equal Opportunity Employer/Disability/Veteran

Overview Location: Onsite, Pittsburgh PA Job Type: Full Time Work Authorization: US Citizen / GC The A.C. Coy Company has an immediate opening for a Quality Control Inspector. This individual will be responsible for detecting nonconformities, preventing defects, and maintaining accurate quality records.Ideal candidates must have at least 2 years of Quality Control experience with strong computer skills, excellent attention to detail, and basic understanding of electronics. Responsibilities Manage daily inspection priorities in coordination with Warehouse and Production managers Communicate internally quality issues identified during inspection or identified during production process / material handling Conduct outgoing inspection to validate material moved through the production process meets quality standards Accurately input data into appropriate data storage locations for all inspected material Validate incoming and outgoing inspection documentation is available, organized, and complete Prepare reports for inspection failures, and provide In-process inspections as needed Provide training and support for the Production team for quality-related process steps and other topics as needed Qualifications 2+ years' experience with incoming and outgoing Quality Control inspection Demonstrated level of technical capability and responsibility Very good written and verbal communication skills are required. Proficiency in Microsoft Office is required, particularly Word and Excel Demonstrated capability as a self-starter in a hands-on environment is required

Careers at Our Amazing Place. At The Children's Institute of Pittsburgh, we've built our legacy on being amazing. After more than a century of the highest quality care and service to children and their families, we're forever proud of our team members who don't just make a career here - they make a difference. Job Title: Quality Control Specialist Location: The Children's Institute Squirrel Hill Campus, 1405 Shady Avenue, Pittsburgh, PA 15217 Schedule: Monday - Friday, Full Time, Onsite (also requires occasional travel to satellite campuses). The Quality Control Specialist will oversee the development, implementation, and monitoring of the internal compliance program quality control systems. The Specialist will manage this process via the Internal Audit Standards and Annual Plan to ensure organizational compliance. Responsibilities Review program documentation for accuracy, completeness and compliance with HIPAA, FERPA, and other agency standards. Track, assess, and conduct ongoing monitoring of quality metrics and operational indicators for program effectiveness and performance standards. Generate and distribute recurring reports, dashboards, and scorecards as scheduled. Recommend process improvements based on audit findings, data analysis, and staff feedback and support the development of standardized forms and templates to improve documentation quality. Collaborate to improve data collection processes and assist in piloting and implementing tools or workflows aimed at improving service quality. Support training and coaching on documentation standards, reporting expectations, and quality improvement practices. Maintain collaborative relationships with internal and external stakeholders to ensure quality and compliance initiatives are understood and implemented. Qualifications A bachelor's degree is preferred, in quality management, quality assurance, or experience in related field. Advance degree or certification in Six Sigma Black Belt, Certified Quality Manager preferred. Two to five years of experience in healthcare or professional office setting preferred. Experience in quality management roles, compliance matters and data analytics preferred. Experience in LEAN preferred Demonstrated expertise in the areas of problem-solving; interpersonal skills, verbal, and written communication skills; presentation skills; collaboration and team building; and is flexible with work hours and location depending on project demands. Excellent interpersonal and communication skills; collaboration and team building; ability to creatively express thoughts and build consensus required. Clearances Required: Act 73 FBI, Act 34 Criminal Clearance, and Act 33 Child Abuse Clearance Benefits Summary We're proud to offer generous benefits to our team members. Regular full-time team members are eligible for the following benefits: Medical and Prescription insurance-Choice of two health plans and networks Dental and Vision-Free coverage for team members. Paid Time Off (PTO) and Holidays Medical, Bereavement, Educational, & Personal Leaves Parental leave (birth & adoption) paid-6 weeks 403b Retirement Plan - pre-tax & Roth options; employer match after 1 year Student Loan Refinancing Program Public Service Loan Forgiveness Program - CI qualifies as non-profit Education Assistance/Tuition Reimbursement Professional Development/CEU's Life and Short- & Long-Term Disability insurance Credit Union Team Member Recognition Events Referral bonus CPR-employer paid Travel mileage reimbursement at federal rate Are you looking for a position where you can make a lasting impact in the lives of children and their families? Are you ready to brighten the future of Amazing Children? We want to hear from you! The Children's Institute of Pittsburgh is an Equal Opportunity Employer. We serve a diverse population of children and families, and we want our workforce to reflect that same diversity. We want all interested individuals to feel welcome in applying for a career at our amazing place - we can't wait to meet you!

Champtires.com is the largest retailer of used tires in the United States, and we're growing. We are currently seeking reliable, hardworking individuals to join our team as Quality Control Technician at our West Mifflin facility. The Quality Control Technician is responsible for evaluating incoming tires from suppliers to ensure they meet Champtires' quality standards. This includes: • Performing visual inspections of all tires • Filling tires with air and checking for leaks or defects • Maintaining a clean and organized work station • Meeting a daily production goal • Opportunities to earn incentive pay based on performance Requirements • Ability to lift up to 50 lbs • Strong attention to detail • Ability to work in a fast‑paced, production‑based environment • Experience preferred but not required • Reliable attendance and a positive attitude Schedule & Benefits • 30‑minute lunch break • Two 15‑minute breaks • Overtime available • Onsite training provided

Job Title: Quality Control Technician Manufacturing Schedule: Monday to Friday Split between 2 local Pittsburgh locations (2 days at one site, 3 days at the other) Salary: $50,000$60,000 annually About Us: Join a growing manufacturing team in the Pittsburgh area dedicated to precision, quality, and collaboration. We specialize in steel and glass production and are looking for a detail-oriented Quality Control Technician to ensure our products meet the highest standards across two sites. Why This Role: Work in a dual-site environment for variety and hands-on experience. Collaborate with a team committed to continuous improvement and professional growth. Opportunity to develop and advance your career in manufacturing quality control. Key Responsibilities: Conduct quality inspections on steel and glass production. Use manual micrometers and calipers to take precise measurements. Read and interpret blueprints accurately. Train and support production staff on quality standards. Assist the Quality Manager with documentation and quality management systems (QMS). Collaborate across both facilities to ensure consistent quality practices. Participate in process improvement initiatives and trials. Qualifications: Minimum 2 years of manufacturing experience in steel or glass industries Proficient with manual micrometers and calipers. Ability to read and interpret blueprints. Basic Excel proficiency. Experience with quality management systems (QMS) required. Associates degree or equivalent experience. Benefits: Health care coverage (PPO/EPO) eligible first month; company covers 75% Dental and vision coverage 401(k) with company match (50% of first 6% contribution) eligible after 6 months PTO: 15 days + 5 sick days, prorated and increasing with tenure 10 company holidays annually How to Apply: If you are detail-oriented, hands-on, and passionate about quality in manufacturing, we want to hear from you! Apply now to join our Pittsburgh-area team.

About Eos Energy Enterprises Eos Energy Enterprises, Inc. is accelerating the shift to American energy independence with positively ingenious solutions that transform how the world stores power. Our breakthrough Znyth™ aqueous zinc battery was designed to overcome the limitations of conventional lithium-ion technology. It is safe, scalable, efficient, sustainable, manufactured in the U.S., and the core of our innovative systems that today provides utility, industrial, and commercial customers with a proven, reliable energy storage alternative for 3 to 12-hour applications. Eos was founded in 2008 and is headquartered in Edison, New Jersey. For more information about Eos (NASDAQ: EOSE), visit eose.com. Quality Control Technicians are accountable for quality records, tests and inspections accurately performed and reported on the computer in simple written reports. Responsibilities Must perform all duties in the department in a safe manner and consistent with all company safety rules. Inspect goods or products according to quality specifications, safety standards and parts characterization. Collate test or production data, providing summary tables and routine quality reports. Disposition suspect product as scrap, rework, or approved. Notify supervisor when quality, test, and inspection data exceed acceptable limits or when incidents of poor quality are noted. Identify possible areas for improvement in quality control and quality system work processes. Makes recommendations to Manager regarding observations and findings. Develop and maintain quality records and metrics. Ensure goods and products comply with company standards. Record and administer quality documents such as quality specifications, forms, and instructions. Assist in internal, third party, and customer audits. Support operation and coordination of calibration on all testing devices. Assist with testing of supplier samples and special inspections. Develops and demonstrates a knowledge and understanding of established quality policy, procedures, and instructions. Knowledge, Skills, and Abilities High-level of visual awareness. Advanced organizational skills. Use and understanding of precision measuring instruments and gauges, specifications, charts, and diagrams. Ability to accurately read measuring devices, blueprints, product specifications and test procedures. Ability to work alone with minimal supervision. Ability to analyze and interpret technical information. Strong attention to detail and recordkeeping. Ability to stand for long periods. Must be able to read, write and speak English. Education and Experience High school diploma or equivalent required. Minimum of 2 years of experience. Experience drafting reports and collating data. High School diploma or GED required; 2-year trade school degree/diploma preferred. Background in R&D or manufacturing environment a plus. Computer skills are required, familiarity with windows and Microsoft office suite. Travel Local Travel: Less than 10% Working Conditions Factory - The worker may be subject to hazards. Includes a variety of physical conditions, such as proximity to moving mechanical parts, vibration, moving vehicles, electrical current, exposure to temperature changes or exposure to chemicals. While performing the duties of this job, the employee may be exposed to fumes, airborne particles, odors, dust, mists, and gases. The noise level in the work environment can be loud. Required to have close visual acuity to perform an activity such as: preparing and analyzing data and figures; transcribing; viewing a computer terminal; extensive reading; visual inspection involving small defects, small parts, and/or operation of machines (including inspection); using measurement devices; and/or assembly or fabrication parts at distances close to the eyes. Machinery operation requires the use of safety equipment to include but not limited to eye safety glasses, hearing protectors, work boots, and lab coats. May be required to exert up to 50 pounds of force occasionally to lift, carry, push, pull or otherwise move objects, including the human body. Additional Requirements This job requires the ability to effectively communicate orally (and occasionally in writing) with co-workers and supervisors, and the ability to understand and quickly react to job-related oral and/or written directions, safety information, and communications (which are generally in English), as our manufacturing processes are constantly changing and evolving.

Position Type: Full Time (40+) Pay Type: Hourly Seasonal Work: Yes Northeast Paving Benefits: * Company Paid Basic Life Insurance * Company Paid Long Term Disability Policy * Company Paid Vacation & Holiday Pay * Company Paid Parental Leave * Company Paid Maternity Leave * Company Paid Employee/Family Assistance Program (EAP) * Voluntary Medical & Vision Insurance * Voluntary Dental Insurance * Voluntary Short Term Disability * Voluntary Supplemental Term Life * Voluntary Accident, Legal, Hospital, Critical Illness Policies * 401(k) Plan w/Employer Match * Annual Company Stock Purchase Opportunities * Discount Partnerships: Verizon, Ford, Perkspot * Health and Wellness Benefits, including Monthly Gym/Fitness Incentives General Description A Quality Control Technician is an hourly-rated skilled craft position that performs on construction projects any combination of the duties described more fully, below. A Quality Control Technician typically performs a wide variety of tasks, transferring from one task to another as the work flow dictates. Key Duties * This position is responsible for controlling the quality of the production of hot mix asphalt through inspection of the plant, production materials, and jobsite review as well as conducting routine and special laboratory testing to ensure conformance standards * Proficiently and accurately sample and conduct visual inspection and laboratory testing of construction materials according to the appropriate standard test methods to insure quality control of products at the point of production, shipping and arrival on the jobsite * Test methods include but not limited to DOT regulations. * Communicate and document test results to plant operator, supervisor and operations * Review mix designs and product to job specifications of upcoming projects * Perform jobsite inspection, customer service and troubleshooting as needed * Prepare various QC reports and formulating specific recommendations to resolve or correct quality issues * Visually inspecting stockpiles, materials sources, plant and truck loads at plant sites * Conduct testing and assisting in plant inspection and calibration to insure the proper quality of the product * Verify outside construction materials testing laboratory results and maintain accurate, timely records of test data, product quality, and defective materials * Prepare statistical summary quality reports on company product lines * Serve as a technical resource to operations, sales and customers * Keep informed of professional and technical developments of new specifications to maintain and improve operational efficiencies by attending relevant technical meetings * Possess and demonstrate a strong working knowledge of asphalt and plant operations * Perform various tests in an orderly, efficient, and accurate manner * Complete understanding of mix design characteristics for asphalt products and various product specifications * Strong math and average computer skills are required * Must possess strong written and verbal communication skills and have the ability to interact with individuals at any level of the organization (i.e. plant production personnel, plant managers, contractors, and agency representatives) * Ability to problem-solve and work independently * Prepare various QC reports and formulate specific recommendations to resolve or correct quality issues; and work with outside venders, agencies, and customers on a variety of quality related issues * Perform incidental work items and duties included within other crafts Qualification Requirements General To perform this job successfully, an individual must be able to perform each Key Duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education and Experience This position typically is not an entry-level job, as it requires demonstrable previous experience as a Quality Control Technician. A high school diploma or general education degree (GED) is preferred. * One (1) or two (2) years of college or equivalent (e.g. trade school, specialized training). * Must be able to understand work directions and communicate effectively with job site supervisors and fellow employees. * Must have 3-5 years field and plant experience in testing and controlling the quality of asphalt pavement materials and construction aggregates. * A valid driver's license is required. Physical Demands The following physical demands are representative of those that must be met by a Quality Control Technician to successfully perform the essential functions of this job. * Constant physical effort, including standing, is required during a regular work shift of at least eight hours per day. Employee must be able to stand for extended periods of time, and to stoop, bend, and crouch as required to perform Key Duties. * Frequently work with hands extended overhead, sometimes in conjunction with the operation of hand power tools. * Ability to lift and carry, on a frequent basis, at least 50-90 pounds personally, and up to 150 pounds with assistance. * Maintain constant alertness to the multiple concurrent activities of the construction site, including the activities of other employees and contractors, the operation of stationary equipment, and the movement of mobile equipment. * Frequently walk on uneven surfaces, including natural ground in varying weather conditions. Work Environment * The work environment characteristics described below are representative of those that a Quality Control Technician encounters while performing the essential functions of this job. * Work is performed outdoors in all weather conditions. * Work environment periodically exposes the employees to high levels of noise, grease, and dust that is typically associated with a construction project. * Employee regularly works near heavy equipment and moving machinery. * Work may involve a variety of substances commonly found on construction sites such as form oil, grease, curing compounds, gasoline, diesel fuel and ready mixed concrete. Demonstrates Safety 1st It is important for members of our team to be actively involved in their own safety, while being considerate of fellow employees. * Assess work environment for possible hazards and makes sure training is adequate to the task. * Has proper personal protective equipment and tools, uses them appropriately for the given task. * Speaks up if seeing an unsafe act * Identifies and turns in near miss reports * Asks for help, when needed, to perform tasks safely. * Considers if there is a safer way to perform work and communicates. Northeast Paving is a full-service paving and construction company operating throughout the northeastern United States. Our teams are capable of handling projects of almost any size and scope, from resurfacing a commercial parking area to constructing high-traffic interstates. The work we do includes roadway construction, railway and bridge construction, paving and resurfacing, utility and drainage installation, and more. Our teams successfully deliver hundreds of projects every year-safely, successfully, and to the exact specifications of our clients. We support a Drug-Free Workplace. EOE AA M/F/Vet/Disability are encouraged to apply. Blythe Construction, Inc. - Hubbard Construction Company - Northeast Paving - Sunmount Paving - Virginia Paving Company, are hereby referred to as Vinci Construction USAAccessibility: If you need an accommodation as part of the employment process please contact Human Resources at Blythe Construction, Inc.: Phone: ************Hubbard Construction Company: Phone: ************Eurovia Atlantic Coast, LLC:Phone: ************ Vinci Construction USA is an Equal Opportunity Employer.Vinci Construction USA is committed to providing a fair and equal employment opportunity workplace. All hiring and promotional decisions are made without regard to race, color, religion, sex (including pregnancy), genetic information, gender identity, sexual orientation, national origin, age, disability, veteran status, or any other status that is protected by federal, state, or local law. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language:

BEA Americas delivers sensors, solutions, and accessories for activation and safety in several market segments including pedestrian and industrial automatic doors, vehicle gates and barriers, transportation, security and retail sensing applications. The Quality Control Inspector I is responsible for incoming and outgoing inspections to ensure BEA's quality standards are met. Attention to detail and excellent communications skills (both written and verbal) are critical in this role. The Quality Control Inspector I will be an Ideal Team Player who supports our mission to build a convenient, safe, automated world and works to achieve our vision of continued growth and market expansion. Primary Duties and Responsibilities: Conduct incoming inspection to validate arriving material meets BEA's quality standards with moderate supervision Conduct outgoing inspection to validate material moved through the production process meets BEA's quality standards with moderate supervision Accurately input data into appropriate data storage locations for all inspected material Validate incoming and outgoing inspection documentation is available, organized, and complete Provide In-Process Inspections as needed Provide training and support for the Production team for quality-related process steps and other topics as needed. Qualifications: To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Associate's degree in Electronics or equivalent experience is required, with demonstrated level of technical capability and responsibility. Very good written and verbal communication skills are required. Proficiency in Microsoft Office is required, particularly Word and Excel. Demonstrated capability as a self-starter in a hands-on environment is required.

BEA Americas delivers sensors, solutions, and accessories for activation and safety in several market segments including pedestrian and industrial automatic doors, vehicle gates and barriers, transportation, security and retail sensing applications. The Quality Control Inspector I is responsible for incoming and outgoing inspections to ensure BEA's quality standards are met. Attention to detail and excellent communications skills (both written and verbal) are critical in this role. The Quality Control Inspector I will be an Ideal Team Player who supports our mission to build a convenient, safe, automated world and works to achieve our vision of continued growth and market expansion. Primary Duties and Responsibilities: Conduct incoming inspection to validate arriving material meets BEA's quality standards with moderate supervision Conduct outgoing inspection to validate material moved through the production process meets BEA's quality standards with moderate supervision Accurately input data into appropriate data storage locations for all inspected material Validate incoming and outgoing inspection documentation is available, organized, and complete Provide In-Process Inspections as needed Provide training and support for the Production team for quality-related process steps and other topics as needed. Qualifications: To perform this position successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Associate's degree in Electronics or equivalent experience is required, with demonstrated level of technical capability and responsibility. Very good written and verbal communication skills are required. Proficiency in Microsoft Office is required, particularly Word and Excel. Demonstrated capability as a self-starter in a hands-on environment is required.

"Come bring your energy to change the world. Grid solutions, part of GE Vernova portfolio of energy businesses, serves customers globally with over 12,000 employees. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technology and accelerate the energy transition." Summary This role will be responsible for Quality support to production during the second shift. This includes in-process inspection of circuit breaker cabinets in wiring, fully assembled breakers before test, and shipping inspection. This position will also perform investigations on test lab failures and disposition/evaluate dielectric cleanout filters. Another function of this role will be to perform quality improvement projects and actions as directed. This position will report to the Senior production quality manager and receive daily direction, projects, and actions. Job Description Essential Responsibilities: * Perform In process circuit breaker inspections * Perform Shipping inspections on orders before they ship. * Support production, inventory, and test teams on any quality issues or problems. * Investigate test lab failures, provide rework direction to the production teams * Audit manufacturing processes and ensuring findings are addressed properly. * Support production teams with disposition for non-conformities. * Be the contact person and facilitate resolution of problems detected on shop floor related to supplier quality, engineering, and R&D. * Conduct training on quality concepts, as needed. * Update and revise manufacturing procedures as required Required Qualifications * High School Diploma / GED with minimum 5 years' experience in manufacturing environment preferably in Circuit Breaker assembly * Excellent communication skills, both verbally and electronically * Excellent organizational skills and attention to detail * Strong computer skills, including Microsoft Word, PowerPoint, and Excel * A strong process & product knowledge, exposure to variety of commodities and manufacturing process Additional Information GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No For candidates applying to a U.S. based position only: * The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on December 01, 2025. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Shape Your World At Alcoa, you will become an essential part of our purpose: to turn raw potential into real progress. The way we see it, every Alcoan is a work-shaper, team-shaper, idea-shaper & world-shaper. The Research and Development Technician will be part of a collaborative team developing new technologies related to aluminum production in electrolytic cells of various scales. The candidate will work with a team to develop and manufacture components for use in aluminum processing, along with maintaining records of observations, results, and data from experiments. Our team at Alcoa Technical Center (ATC), located in New Kensington, PA, consists of individuals with diverse backgrounds and expertise, including scientists, engineers, and technicians. About the Role This is your opportunity to shape your career through the skills and experience you bring to the role now and by training for the roles you may want in the future. Our success depends on great teams, where you can thrive and do your best work in a supportive environment. Operate processing equipment, including mixers, mills, extruders, dryers and furnaces. Operation of cranes and fork trucks (On-site training to be provided). Collaborate with a team to develop new materials and processes, collect samples, and report findings. Complete tasks around and with equipment where fumes, dust, and chemicals exist (PPE required). Understand and follow safe work instructions in line with Alcoa's policies and procedures. Perform work in crouching, kneeling, and stooping positions. What you can bring to this role: High school diploma, GED, or trade school degree in mechanical/electrical trades. Candidates with experience in a manufacturing environment preferred but not required. Good mechanical skills, comfortable using hand tools. Ability to perform material handling (up to x pounds), weighing, following process steps in sequence, and documenting process data. Valid Driver's License required. Flexible with schedule changes. Preferred Qualifications: 2 years relevant work experience in a light industry environment (example: vehicle repair garages, paint and chemical production, building maintenance shops, metal work, millwork, and cabinetry work) 2 years relevant work experience in the testing or laboratory environment 2 years relevant work experience with materials processing What we offer: Shift differentials, overtime & holiday pay 120 hours of paid vacation per year (prorated based on hire date your first year). Flexible spending accounts and generous employer contribution to the HSA 401(k), employer match up to 6%, additional employer retirement income contribution (no vesting period), and a non-qualified deferred compensation plan 10 holidays and one flexible holiday of your choice. 56 hours of sick/safe leave 4 hours of Paid annual volunteer hours Alcoa has been chosen as one of America's Greatest Workplaces 2023 by Newsweek #LI-TL2 About the Location Every day is a new and exciting challenge at the Alcoa Technical Center in New Kensington, PA, just north of Pittsburgh. We develop new technologies with our Breakthrough Technologies team that has the potential to impact the life of millions of people and foster the sustainable footprint from Alcoa to the world. It was here where we developed the technology recently announced in partnership with Rio Tinto, called ELYSIS™, where we will produce aluminum with ZERO emission of greenhouse gases. In fact, we will actually be generating oxygen to our atmosphere during the aluminum production process- a revolution to the aluminum industry! We are values led, vision driven and united by our purpose of transforming raw potential into real progress. Our commitments to Inclusion, Diversity & Equity include providing trusting workplaces that are safe, respectful and inclusive of all individuals, free from discrimination, bullying and harassment and that our workplaces reflect the diversity of the communities in which we operate. As a proud equal opportunity workplace and affirmative action employer, Alcoa is dedicated to providing equal opportunities and equal access to all individuals regardless of a person's gender, age, race, ethnicity, sexual orientation, gender identity, religion, nation of origin, disability, veteran status, language spoken or any other characteristic or status protected by the laws or regulations in the places where we operate. If you have visited our website in search of information on U.S. employment opportunities or to apply for a position, and you require an accommodation, please contact Alcoa Recruiting via email at ***********************. This is a place where you are empowered to do your best work, be your authentic self, and feel a true sense of belonging. Come join us and shape your career! Your work. Your world. Shape them for the better.

Essential Job Functions/Responsibilities: Manufacturing firm is searching for a qualified candidate to perform NDE on ASME Section III, Section VIII Vessels and nuclear power plant components. Experience in working with the following codes/standards: ASME, AWS, ISO and other standards are desired. Job requires potential overnight travel and will require off shift work. Adherence to safety procedures/guidelines at all times. Maintain safety precautions at all times. Keep work area in a clean and orderly condition. Perform specific inspections and specific evaluations for acceptance or rejection determinations according to written instructions and to record results. Perform Radiographic (RT) Examinations Familiar with the tools and equipment and shall have demonstrated proficiency in their use. Capable of determining the calibration status of RT equipment is in proper condition for use, and that inspection, examination and test procedures are approved. Train other individuals as required by management. Physical Demands & Abilities: Must demonstrate the ability to read the equivalent of the size and letters of the Jaeger I chart at a minimum distance of 12 inches and distinguish and differentiate the contrasts between colors illustrated on an Ishihara Test Chart including shades of gray. Inspection personnel performing work on elevated surfaces shall be capable of wearing the required fall protection equipment. Inspection personnel shall be physically capable of crawling in and out of small manways, climb inside vessels, towers, heaters, or other confined spaces for inspection activities, often wearing Self Contained Breathing Apparatus (SCBA) as required to comply with safety regulations. Any fear of closeness (claustrophobia) should be identified. Inspection personnel shall be able to lift, carry, push, pull or otherwise move objects weighing up to 50 pounds Will work in various areas of the plant location. Dependent upon the area, environmental conditions can be hot, cold, dirty, greasy, wet and noisy. May work alone with minimal supervision or with other personnel. Inspection personnel shall possess fundamental written and verbal communication skills. Inspection personnel shall be fluent (written and verbal) in the English language. Computer skills, especially familiarity with MS Office applications, are necessary. Comfortable working in fast paced team environment Supports: Quality Control Manager, Shop Managers, Quality Control Supervisor, Production Supervisors, Product Line Managers Required education: Required: High School diploma or equivalent with at least 3 years of inspection related experience. Preferred: 2 years of inspection related experience with a completion of 2 years of college in technical or engineering related discipline from a university, college, or technical school. Preferred: 1 year of inspection related experience with a degree in engineering or science from a university or accredited college. Minimum and Preferred Qualifications: Must be qualified and certified to ASNT-TC-1A in the following NDT Methods that will be utilized: Radiographic (RT) Preferred candidate to have previous shooters card along with Safety Training associated with Radiography. Preferred candidate will be a Certified Level II Digital Radiography (DR) Preferred candidate will be Certified in one or more of the following NDT methods in conjunction with RT: Visual Examination (VT), Liquid Penetrant Examination (PT) Magnetic Particle Examination (MT) Ultrasonic Examination Required Licenses or Certifications: Valid Driver's License Previous Level II Certification to ASNT-TC-1A including documented objective evidence of classroom and on the job training experience

Job Description Kurt J. Lesker Company is seeking a skilled Quality Control Technician to perform inspections and leak checks on our products in accordance with our quality standards. Key Responsibilities: Conduct visual, dimensional, and leak inspections using CMM and other equipment. Verify compliance with engineering drawings and specifications. Complete inspection documentation and maintain logs. Provide guidance to junior inspectors and assist in task assignments. Collaborate with Engineering and Project Management on inspection priorities. Ensure adherence to safety and company policies. Perform other duties as assigned. Qualifications: Required 8-10 years of experience in mechanical inspection, manufacturing, or quality control. Proficient in CMM operations and programming. Skilled in vacuum leak detection, SPC inspections, GD&T, and various inspection stages. Demonstrated leadership or supervisory experience. Strong computer skills and familiarity with quality management systems. Effective verbal and written communication skills. Preferred: Expert-level CMM knowledge. Proficiency in Microsoft Office. Benefits we offer to enhance your lifestyle: On-site gym and Running/Walking Trail Health & Wellness Programs including mental, physical, and financial (on-site yoga, meditation, seminars, flu shots, biometrics screening, annual 5K, waste pick up events, etc.) Comprehensive benefits, including medical, dental, vision, life, and disability insurances Recycling program and electric vehicle plug in station Paid time off 401(k) with employer match Office-wide events Employee recognition programs Kurt J Lesker Company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. KJLC is committed to providing reasonable accommodations for persons with disabilities (unless doing so will result in undue hardship). If you need a reasonable accommodation for any part of the employment process, please send an e-mail to our human resources department at ************* or call ************** to provide the nature of your request. Powered by JazzHR UHR2gKL7EF

"Come bring your energy to change the world. Grid solutions, part of GE Vernova portfolio of energy businesses, serves customers globally with over 12,000 employees. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technology and accelerate the energy transition." Summary This role will be responsible for Quality support to production during the second shift. This includes in-process inspection of circuit breaker cabinets in wiring, fully assembled breakers before test, and shipping inspection. This position will also perform investigations on test lab failures and disposition/evaluate dielectric cleanout filters. Another function of this role will be to perform quality improvement projects and actions as directed. This position will report to the Senior production quality manager and receive daily direction, projects, and actions. **Job Description** **Essential Responsibilities:** + Perform In process circuit breaker inspections + Perform Shipping inspections on orders before they ship. + Support production, inventory, and test teams on any quality issues or problems. + Investigate test lab failures, provide rework direction to the production teams + Audit manufacturing processes and ensuring findings are addressed properly. + Support production teams with disposition for non-conformities. + Be the contact person and facilitate resolution of problems detected on shop floor related to supplier quality, engineering, and R&D. + Conduct training on quality concepts, as needed. + Update and revise manufacturing procedures as required **Required Qualifications** + High School Diploma / GED with minimum 5 years' experience in manufacturing environment preferably in Circuit Breaker assembly + Excellent communication skills, both verbally and electronically + Excellent organizational skills and attention to detail + Strong computer skills, including Microsoft Word, PowerPoint, and Excel + A strong process & product knowledge, exposure to variety of commodities and manufacturing process **Additional Information** GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No For candidates applying to a U.S. based position only: *The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. This posting is expected to remain open for at least seven days after it was posted on December 01, 2025. Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance and 12 paid holidays. New hires also two weeks of annual vacation (which may be pro-rated based on start date). GE Vernova Inc. or its affiliates (collectively or individually, "GE Vernova") sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.