Quality control analyst jobs in Jenks, OK - 30 jobs

Allient Inc. is in growth mode and currently seeking a Quality Control Technician to join our team in Tulsa, Oklahoma! The Quality Control Technician performs inspections, checks, tests, and samplings on all incoming materials, parts and components used in the manufacturing of products provided by our company. Responsibilities: * Performs inspections of purchased parts, subassemblies and finished goods (including FAIs) according to well defined criteria using standard physical, mechanical, and/or electrical measurements. * Inspects, reworks, or rejects subassemblies or finished products as required. * Conducts and documents process and system audits using written procedures as audit standards. * Accurately documents the results of each inspection and testing. * Coordinates and/or performs calibration of test equipment and fixtures. * Reads and interprets engineering drawings and material specifications. * Maintains detailed records describing and verifying completion of all required quality inspections. Minimum Qualifications: * Associate's Degree in engineering or a technical discipline. In lieu of a degree, equivalent number years of experience is required. * 0- 2 years of related experience required. * Knowledge of dimensional metrology, along with the technical skills to perform basic mechanical inspection and gauging operations. Basic understanding of GD&T (ASME Y14.5) a plus. * Solid computer skills include MS Office Physical Demands: * Good manual dexterity and eye/hand coordination. * Required to stand, walk, and sit and requires some lifting in excess of 25 pounds. * May use manufacturing equipment and machines that requires personal protective equipment Work Environment: * This position operates in both the office environment as well as the production floor. * While on the production floor, employee may be subjected to moving mechanical parts and may be required to put on precautionary, protective wear such as goggles. * Some travel may be required. To learn more about Allient, visit our website at *************** * Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job DescriptionCosmetic R&D Lab Technician Department: Research & Development - Product Innovation Reports To: VP R&D, Regulatory and Quality About the Role We're looking for a hands-on, detail-oriented Cosmetic R&D Lab Technician to join our innovative product development team. In this role, you'll support formulation and testing of new skincare and cosmetic products, ensuring quality, consistency, and performance that meet our brand standards. You'll work closely with our chemists and cross-functional teams to prepare samples, assist with trials, and maintain a clean, efficient, and compliant laboratory environment. What You'll Do Prepare and mix samples (compounding and extrusion) for formulation testing and customer trials. Maintain accurate records of testing procedures, results, and sample batches. Collaborate with cross-functional teams in both lab and manufacturing settings to support product development and scale-up. Perform general lab housekeeping and equipment maintenance to ensure safety, quality, and reliability. Operate support equipment for extrusion and compounding lines. Routinely lift and move materials up to 50 pounds, climb stairs and ladders, and work in varying temperature environments. Who You Are (Basic Qualifications) High school diploma or equivalent required. Previous experience in a manufacturing, laboratory, or industrial environment. Analytical, detail-oriented, and able to troubleshoot formulation issues. Excellent communication, teamwork, and time management skills. Commitment to continuous learning and staying current on industry trends and technologies. Proficient in Microsoft Office (Word, Excel, Teams, Outlook). Must have legal authorization to work permanently in the United States for any employer without requiring a visa transfer or visa sponsorship. What Will Put You Ahead Associate degree or higher in Science, Chemistry, Biology, or related field. Experience in a cosmetic, chemical, or polymer laboratory. Hands-on experience with extrusion, molding, or compounding equipment. Experience preparing or testing samples in a product development environment. Why Join SeneGence SeneGence is a global leader in luxury beauty, skincare, and wellness products-driven by innovation and empowerment. Our R&D team plays a key role in developing high-performance products that deliver real results. You'll join a collaborative environment where science meets creativity, and your work directly contributes to products used and loved around the world. Equal Employment Opportunity SeneGence International is an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. Employment decisions are made without regard to race, color, religion, sex, national origin, age, disability, veteran status, or any other legally protected characteristic.

**Quality Control (QC) Technician / Inspector** + $23-29.00/HR + 1st Shift + Climate Controlled Shop We are seeking a detail-oriented Quality Control (QC) Technician to inspect and verify manufactured equipment containing both electrical and mechanical components. The ideal candidate will ensure products meet quality standards, engineering drawings, and customer requirements while working closely with production, engineering, and management teams. **Key Responsibilities** + Perform quality inspections on manufactured equipment with electrical and mechanical components + Inspect assemblies, subassemblies, and finished products for workmanship, functionality, and compliance + Read and interpret engineering drawings, schematics, and specifications + Identify and understand electrical and mechanical symbols used in drawings and documentation + Verify materials, components, and wiring against drawings and bills of materials (BOMs) + Document inspection results, non-conformances, and corrective actions + Communicate quality issues clearly and professionally with production and engineering teams + Support continuous improvement efforts and help resolve quality-related problems + Ensure compliance with company quality standards, procedures, and safety requirements **Required Skills & Qualifications** + Experience in quality control or inspection in a manufacturing environment + Strong understanding of electrical and mechanical components + Ability to read and interpret engineering drawings, schematics, and symbols + Excellent attention to detail and problem-solving skills + Strong written and verbal communication skills + Proven ability to work effectively as a team player + Comfortable using basic measurement and inspection tools + Basic computer skills for documentation and reporting + Experience with electrical, mechanical, or industrial systems ( for example QC, assembly, maintenance, etc.) + Experience inspecting industrial equipment, machinery, or control panels + Familiarity with quality standards **About ManpowerGroup, Parent Company of:** **Manpower, Experis, Talent Solutions, and Jefferson Wells** _ManpowerGroup (NYSE: MAN), the leading global workforce solutions company, helps organizations transform in a fast-changing world of work by sourcing, assessing, developing, and managing the talent that enables them to win. We develop innovative solutions for hundreds of thousands of organizations every year, providing them with skilled talent while finding meaningful, sustainable employment for millions of people across a wide range of industries and skills. Our expert family of brands -_ **_Manpower, Experis, Talent Solutions, and Jefferson Wells_** _-_ creates substantial value for candidates and clients across more than 75 countries and territories and has done so for over 70 years. We are recognized consistently for our diversity - as a best place to work for Women, Inclusion, Equality and Disability and in 2022 ManpowerGroup was named one of the World's Most Ethical Companies for the 13th year - all confirming our position as the brand of choice for in-demand talent. ManpowerGroup is committed to providing equal employment opportunities in a professional, high quality work environment. It is the policy of ManpowerGroup and all of its subsidiaries to recruit, train, promote, transfer, pay and take all employment actions without regard to an employee's race, color, national origin, ancestry, sex, sexual orientation, gender identity, genetic information, religion, age, disability, protected veteran status, or any other basis protected by applicable law.

Chemical Service Technician at a Data Center-Tulsa Oklahoma A Water treatment Chemical Technician will be responsible for working at a customer's data center in the Tulsa, Oklahoma area. The Chemical Technician will solve customer water treatment concerns, perform extensive water treatment lab work, and troubleshoot water treatment and control equipment at a customer's massive data center. As a Chemical Service Technician, you will receive an industry competitive salary, expenses, and benefits. In addition, ample technical support is provided along with continuous training. Compensation is based upon experience and the ability to succeed. $55,000 to $70,000 first year base for a qualified candidate. Plus a year-end bonus! We hire with a focus that favors the committed employee both in terms of overall compensation and growth opportunities. We have designed our compensation package accordingly. Benefits include a corporate 401k, health, dental, vision, and life insurance. Garratt-Callahan (wwwgarrattcallahan.com) is family friendly, profitable, stable, and fiercely private. No layoffs in 120 years. No ownership change in 120 years. 80 straight years of profitability. We have operations from Asia, to the Caribbean, and in every state in the USA. Job Responsibilities: Solve customers' water problems. Treat industrial cooling towers to keep them energy efficient and environmentally friendly. Perform detailed water testing & analyses at a data center. Help deliver on customer KPIs and promote Garratt-Callahan solutions including proprietary chemical blends, equipment, & monitoring technology. Reports directly to the Site Manager. Keep our existing customers happy and safe. About Garratt-Callahan: Garratt-Callahan is a US based private 120 year old, nationwide water treatment chemical company. Garratt-Callahan *********************** treats industrial boilers and cooling towers to keep them energy efficient and environmentally friendly with one of the most advanced product lines in the industry. We are registered to ISO 9001:2015 and sell an industry leading line of “green" solutions, G-C GreenTech. We are headquartered in Burlingame, California. G-C is family owned, profitable, and expanding. We have five chemical plants in the USA, sales people in every state, and operations in Asia, the Pacific, and the Caribbean. Benefits: We offer a competitive benefit package which includes medical, dental, vision, AD&D, LT, and 401k. First year compensation $55,000 to $70,000 plus bonus, depending on experience. Car Allowance Advanced training, and a clear career path. Family friendly, flexible hours. A huge benefit of working for Garratt-Callahan is our stability and low turnover. No Layoffs in our 120-year history. G-C is a profitable company. The last year that G-C did not turn a profit was during World War 2. To Apply, please log on to : ************************************************************************************************************************ Id=19000101_000001&job Id=557126&source=CC2&lang=en_US Thank you for considering Garratt-Callahan Company. Garratt-Callahan is an EEO/AAE employer. Minorities, women, veterans and individuals with disabilities are encouraged to apply. Requirements : You will be a successful applicant if you have a technical degree in Chemistry, Chemical Engineering, Biology, Mechanical Engineering, Paper Science, or Water Resources. You must have a 4-year technical degree in the sciences to qualify for this position. A successful applicant must have experience or interest in learning advanced water treatment technologies. A successful applicant must be detail-oriented, adhere to safety protocols, and be able to lift 50 pounds wearing PPE in all weather conditions. One year technical sales, or an internship related to water treatment chemicals is preferred, but we are willing to train and mentor. Outside industrial sales experience is a plus. You must live in or near Tulsa, Oklahoma and be familiar with the industrial marketplace of the area. Additional Preferred Qualifications: • Familiarity With Industrial Cooling Towers • Knowledge and Proficiency with Lab Procedures, Water Equipment, & Water Chemistry • Ability to Provide Virtual Presentations to Group • Experience Working in a Team Setting as a Collaborative Partner NOTE : Garratt-Callahan does not sponsor work visas. No recruiters please. If you have a disability, and need assistance during the application and selection process as a result, please contact the Garratt-Callahan Human Resources department at ************. Arrangements can be made to provide an accommodation in order to assist you in applying for an open position using our on-line system, completing any other related paperwork, interviewing, or any other portion of the employment process. This phone number is only for disability assistance. When requesting an accommodation, please provide your name, phone, email address, or any other means of contacting you. Provide a brief description of the nature of the requested accommodation. A member of the Human Resources team will then contact you to discuss your request. A request for an accommodation will not affect your opportunities for employment with Garratt-Callahan. Garratt-Callahan values differing experiences, backgrounds and perspectives among our employees, and see them as a competitive advantage. Garratt-Callahan is committed to the fair and equal treatment of all associates and applicants. Garratt-Callahan is an equal opportunity employer that evaluates qualified applicants without regard to race, color, national origin, religion, sex, age, marital status, disability, veteran status, sexual orientation, gender identity, or any other characteristic protected by law. The “Equal Employment Opportunity is the Law” poster is available at: **************************************************************** Garratt-Callahan Company's reaffirmation of Equal Employment/Affirmative Action Statement ************************************************************************ Key Words: Chemistry, chemicals, scientific, science, salesperson, salesman, saleswoman, outside sales, technical sales, account representative, account executive, territory sales, territory manager, district sales, district manager, field engineer, field service, AE, sales engineer, data center, chemical engineer, chemist, mechanical engineer, biologist, biology, microbiology, nalco, ecolab, us water, Suez, ge water, chemtreat, veolia, solenis, chem-aqua, kurita, evoqua, fremont, water treatment, boilers, cooling towers, waste water, pumps, equipment, chillers, polymers, biocides, data center, Tulsa, Oklahoma, Pryor, Broken Arrow

Job DescriptionQuality Control Inspector II Pay Rate and Hours: Pay: $24/hr Hours: Monday through Friday, 7:00 am to 4:30 pm The Quality Inspectors are responsible for providing Quality support for the maintenance and documentation of tools and equipment for the Services Group. Supporting receiving inspections, work order inspections, first article inspections, and final inspections. Quality Inspectors are also responsible for making accurate assessments of the conformance of parts and materials which are suspect. Quality Control Inspector II Overview: Responsible for inspecting all products related to HPES (incoming inspection, production inspection, finished goods before delivery and pre and post maintenance) and providing technical guidance to the Production and Services staff. Key Responsibilities Quality Control Inspector II Primary duties may include, but are not limited to: Supports the quality department by performing and recording inspections Ensure processes and procedures are adhered to Ensure traceability is maintained throughout assembly and maintenance of tools / equipment. Confirm documentation is maintained properly Establish non-conformity reports when necessary Responsible for the necessary administration by maintaining various databases, reports and files to support the QC function Take all the actions to keep tools and instruments in conformity with the ISO procedures and QA/QC recommendations Suggests and discusses with the Quality Manager improvements on processes, equipment and tools Ensures that products containing non-conformity are under control by placing non-conforming products into quarantine area Provides and archives technical data (codes and standards) and records to increase customer satisfaction Provide technical assistance (defect detection, acceptance and rejection) to the manufacturing department by auditing the assembly process Quality Control Inspector II Experience: Experience in assembly process (as inspector) is a very good asset Experience in Quality Control is required Quality Control Inspector II Knowledge, Skills, and Abilities: Good knowledge in machine design, assembly, machining, drawings and QC activities Open to learn new technical tools like 3D arm, PMI, OES device Good organization skills, flexible, stress resistant and team spirit Rigorous, accurate and reliable Key Personnel Benefits While on Key Personnel's payroll, you can access Key's benefits package, including health, dental, vision, accident, critical illness, term life, short-term disability, PTO, and more! Only qualified applicants will be contacted to make the best use of your time. Apply online at *************** today! Our office is at 9717 E. 42nd St (TechRidge Office Complex on 42nd and Mingo), Tulsa, OK. Please bring a resume and ID to complete the I-9 form between the hours of 8 am to 3 pm, Monday through Friday. Key Personnel is an Equal Opportunity Employer.53627084

** Kemp Quarries is a leading producer of construction aggregates, primarily crushed stone, sand and gravel. These materials are most often produced from natural deposits of limestone and river sand. Our mining process typically begins with drilling and blasting the rock into smaller pieces. The material goes through various stages of crushing and screening to produce the sizes and specifications desired by our customers. Our aggregates are used in different ways within the construction industry. As an associate member of the Oklahoma and Arkansas AGC chapters, we work closely with member contractors in providing materials to meet the most stringent needs and state certifications. ◾ As a base material underneath highways, walkways, airport runways, parking lots and railroads. ◾ To help aid in water filtration, purification and erosion control including Type I and Type II Rip Rap. ◾ Used as a raw material in combination with other resources to construct many of the items that we rely on daily. ◾ Houses and apartments; ◾ Roads, bridges and parking lots; ◾ Schools and hospitals; ◾ Commercial buildings and retail space; ◾ Sewer systems; and ◾ Airports and runways. Construction aggregates have formed the underpinnings for many of our cities, towns and transportation networks. Thousands of years ago, civilizations built entire cities with stone, sand and gravel, and many of these ancient structures still exist today. Aggregates are durable, attractive, and can be used in many different applications. On average, every American uses approximately eight tons of aggregates each year. Although our principal product is construction aggregates, Kemp Quarries offers a variety of other state-approved products and services. About the Position Responsible for the sampling, inspecting and testing of all produced materials (aggregate, sand, etc.) and compare against specifications. Will also be required to be a backup to all Weighmasters along with picking up parts and delivering parts as needed. KEY RESPONSIBILITES / ESSENTIAL FUNCTIONS: ◾ Regular, reliable attendance at the worksite or assigned work location. ◾ Follow all safety and environmental rules, regulations and procedures as set forth by company policies and MSHA. ◾ Follow all company policies and local, state and federal regulations for safe working procedures. ◾ Obtain samples and perform necessary tests on various aggregate products following ASTM & ODOT standards. ◾ Preparing samples of products for customers and testing laboratories and may deliver to assure safe arrival. ◾ Records and maintains test data and other required information. This includes both written records and data input into a personal computer. ◾ Performs daily maintenance on lab and test equipment. ◾ Responsible for overall housekeeping including plant, equipment, and site. ◾ Ability to comprehend and complete all needed paperwork in a timely and accurate manner. ◾ Other duties and responsibilities related to the nature of the job may be assigned on a temporary or permanent basis as needed. PHYSICAL REQUIREMENTS: ◾ Lift objects of various dimensions and up to 75 lbs occasionally and 50 lbs frequently. ◾ Ability to repeatedly climb stairs and ladders. ◾ Ability to repeatedly balance, bend from the trunk, crawl, kneel, push and pull objects. ◾ Ability to use vibration producing tools frequently. ◾ Ability to tolerate working outdoors in all environmental temperatures and weather conditions. ◾ Ability to repeatedly reach, squat and tolerate prolonged standing/walking/sitting. ◾ Ability to frequently walk on uneven surfaces. REQUIRED SKILLS/EXPERIENCE: ◾ Ability to read, write and figure mathematical calculations. ◾ Good observation skills. ◾ Self-motivated, organized and has the ability to work without direct supervision. ◾ Excellent verbal, written and comprehension communication skills. ◾ Must work well with others in a team environment. ◾ Must be able to quickly understand and adhere to safety requirements of this position. ◾ Ability to work overtime, nights and weekends as required. ◾ Ability to work near, around or on light or heavy equipment. ◾ Willingness to work outside in all weather extremes. ◾ Ability to work near, around or on light or heavy equipment. ◾ Ability to use a computer and various computer programs such as but not limited to Microsoft outlook, word and excel. Location Pryor Quarry - Pryor OK We are an equal opportunity employer, dedicated to a policy of non-discrimination in employment on any basis including age, sex, color, race, creed, national origin, religious persuasion, marital status, political belief, or disability that does not prohibit performance of essential job functions. Federal Law prohibits the employment of unauthorized aliens. All persons hired must submit satisfactory proof of employment authorization and identity (valid driver's license. Birth certificate, Green Card, etc.) with in three days of being hired. Failure to submit such proof within the required time shall result in immediate termination.

Allient Inc. is in growth mode and currently seeking a Quality Control Technician to join our team in Tulsa, Oklahoma! The Quality Control Technician performs inspections, checks, tests, and samplings on all incoming materials, parts and components used in the manufacturing of products provided by our company. Responsibilities: • Performs inspections of purchased parts, subassemblies and finished goods (including FAIs) according to well defined criteria using standard physical, mechanical, and/or electrical measurements. • Inspects, reworks, or rejects subassemblies or finished products as required. • Conducts and documents process and system audits using written procedures as audit standards. • Accurately documents the results of each inspection and testing. • Coordinates and/or performs calibration of test equipment and fixtures. • Reads and interprets engineering drawings and material specifications. • Maintains detailed records describing and verifying completion of all required quality inspections. Minimum Qualifications: • Associate's Degree in engineering or a technical discipline. In lieu of a degree, equivalent number years of experience is required. • 0- 2 years of related experience required. • Knowledge of dimensional metrology, along with the technical skills to perform basic mechanical inspection and gauging operations. Basic understanding of GD&T (ASME Y14.5) a plus. • Solid computer skills include MS Office Physical Demands: • Good manual dexterity and eye/hand coordination. • Required to stand, walk, and sit and requires some lifting in excess of 25 pounds. • May use manufacturing equipment and machines that requires personal protective equipment Work Environment: • This position operates in both the office environment as well as the production floor. • While on the production floor, employee may be subjected to moving mechanical parts and may be required to put on precautionary, protective wear such as goggles. • Some travel may be required. To learn more about Allient, visit our website at *************** *Allient Inc. provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation, and training.

Job Title: Quality Control Technician A & M - OUR COMPANY A & M Engineering and Environmental Services, Inc. (A & M) was founded in 1984 with our Headquarters located in Tulsa, Oklahoma. From our humble beginnings, we have developed into a diverse company providing turnkey construction, remediation services, engineering/design, compliance, and professional services to governmental agencies, private sector entities, and Native American tribes. A & M is comprised of a talented team of industry leaders dedicated to solving complex projects and challenges for our clients through providing great value through leading technology, innovation, and creative solutions. As a responsive, cross-disciplinary team of bright, curious, and innovative problem-solvers, we are dedicated to high quality delivery to our clients. A & M is committed to providing reliable services that are top quality, precise, and cost-effective. We strive to provide turn-key services that meet all our client's needs from permitting to implementation; design to build; and remediation to monitoring. Our key drivers (safety, reliability, capability, affordability, quality, compliance, and trust) are embedded in our products and services and practiced in our professional activities. A & M greatly values our employees and promotes a positive work/life balance with a work environment that offers opportunities for professional development and career advancement supporting our program and portfolio spanning across the United States. A & M is seeking a Quality Control Technician to join our team providing leadership and management supporting A & M's portfolio of environmental and civil projects. This position is remote, with travel to the job site. Responsibilities/Duties WHAT YOU'LL BE DOING The successful candidate will be responsible for: Compile new quality reports and data, then enter results. Gather field samples for quality tracking. Responsible for observing and reporting on quality control issues. Complete weekly reports accurately and on time. Perform inspections of delivered materials and installed systems. Read and comply with numerous requirements regarding work permits. Read and comply with MSDSs which accompany all chemicals which are present at the hazardous waste site Prepare, submit and track material and equipment submittals. Be able to track field changes and develop as-built drawings. Use of CADD software a plus. Maneuver uneven terrain Provide excellent customer service Execute tasks from detailed written and oral instructions Assist with the assembly of shoring systems for excavation Read and comply with safety plans, rules, maintenance instructions, training manuals, MSDSs, warning tags, traffic signs, and procedure manuals. The duties in this posting are representative categories to be used in deciding whether to apply for the position. These general categories do not constitute an exhaustive list of duties of the position for which you are applying. Requirements REQUIRED SKILLS The ideal candidate will need the following for success in this role: High School Diploma or equivalent Reliable transportation to and from work. Possess and maintain a valid driver's license with clean driving record Excellent verbal and written communication skills Proficient computer knowledge, specifically Word and exceptional experience developing and working with Excel spreadsheets. Successfully pass all required training [Prefer] Experience with behavior-based safety programs (i.e. LPS) Current 40 hr. HAZWOPER Training. Current 10 hr. OSHA Card [Prefer] 2 years construction experience. Must have a strong work ethic, handle working independently with a desire to learn and improve. Must be able to manage time and complete assigned projects within deadlines Promotes teamwork within the project and externally by positive, cooperative attitude and willingness to take on additional duties as directed. Be able to read and understand construction drawings and specifications as well as implement project plans. Details MORE ABOUT A & M AND THE OPPORTUNITY At A & M, we strive through team collaboration, unified vision, and a positive work environment while striving for excellence for all our clients. A pre-hire drug test is required. Some positions may require U.S. citizenship. A & M is an Equal Employment/Affirmative Action employer. We do not discriminate in hiring on the basis of sex, gender identity, sexual orientation, race, color, religious creed, national origin, physical or mental disability, protected Veteran status, or any other characteristic protected by federal, state, or local law. For more information about, or to apply for this position please click our link below: **************************************

WILL TRAIN ON DAY SHIFT, EVENUALLY GO TO NIGHT SHIFT EXPERIENCED QUALITY INSPECTOR FOR CHECKING PARTS FORMED OFF THE LASER TABLE, PLASMA TABLE AND PRESS BRAKE. 10 HR. SHIFTS READ MICS AND CALIPERS TAPE MEASURE WITHIN THE 16TH READ BLUEPRINTS. WORK HOURS: 7:00AM-3:30PM $19.00-$20.00 HR. WEST TULSAWORK HOURS: 6:00AM-3:30PM WILL TRAIN ON 1 ST SHIFT AND EVENTUALLY GO T O NIGHT SHIFT

Full-time Description The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines.

Compensation: $32.19/hr ST, $48.29/hr OT Aerospace sheet metal and composite experience preferred. In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principle Duties and Responsibilities: Essential Functions: Perform inspection duties utilizing engineering drawings and orders, route cards, inspection travelers, work instructions, technical specifications, QA procedures and instructions, and other related documents. Perform preliminary and progressive inspections of aircraft structure and systems, verify functional operation, final inspections, inspect for FOD, and verify paperwork. Witness, verify, and document specified manufacturing process steps. Perform conformity/first article inspections to ensure compliance with FAA-approved procedures. Ensure the proper use and storage of area tools and equipment. Conduct work in a manner that enhances own/other employees' health and safety, product safety, and promotes risk reduction; participate openly in safety-related event investigations and immediately report workplace hazards and make suggestions for control; cooperate and contribute toward the overall success of the Safety program at the local level. Additional Functions: Provide technical support to manufacturing personnel. Perform area inspections to ensure compliance with applicable standards and specifications. Participate in continuous improvement activities. Perform other duties as assigned. Job Requirements: High School Diploma or GED required. 1 year of quality inspection experience or 2 years of GAC manufacturing experience required. 2 years of manufacturing experience or equivalent aerospace experience is preferred. Other Formal Inspection Training Program 90 Days required. Other Requirements: Working knowledge of shop mathematics, and CATIA or blueprint reading and interpretation. Competent in the use of basic shop tools and equipment.

Description:Job Description Job Title: Quality Control Inspector Reports to: Quality Manager Classification: Non-Exempt Safety Sensitive: Yes R&A Form: Quality Inspector The Quality Inspector plays a crucial role in ensuring our products meet the highest standards of quality and compliance with industry standards throughout the production process. This person will serve as a hands-on resource for our production teams, providing interpretation and guidance on compliance standards. The Quality Inspector will work closely with the Quality Manager, Quality Lead and production teams to uphold Fiber Pad and our customers' quality standards. This role is performed under established guidelines and criteria. RESPONSIBILITIES/ESSENTIAL FUNCTIONS Conducts routine inspections of in-process and completed parts for production teams, utilizes manual measuring practices for precise specifications. Verify part to print accuracy for Shipping & Receiving. Complete First Article Inspections and paperwork. Read and understand complex blueprints. Verify stock to engineering revision changes. Utilize measurement tools such as calipers to assess product dimensions and tolerances. Maintain quality systems in accordance with AS9102 standards. Reports on and speak to quality metrics for management review. Collaborate with cross-functional teams to identify areas for improvement in processes and product quality. Provide training and guidance on quality standards to production staff. Document non-conformances and assist in the development of corrective action plans. Additional duties as needed or assigned by management. Adhere to safety protocols while handling materials and operating equipment. Assist in all phases of housekeeping to keep the facility clean and organized to help maintain a neat and tidy work area. Perform other duties as needed or assigned by leadership. Requirements: REQUIRED QUALIFICATIONS Minimum of 1 year of Proven experience in a Quality Control or Quality Assurance role within a manufacturing environment. Ability to use all measuring tools, read and decipher detailed measurements on blueprints. Ability to read GD&T prints and perform manual measurements frequently to complex specifications. Knowledge of AS9100 Quality System, AS9102 FAI paperwork, First Article Inspection. CMM knowledge strongly preferred. Strong analytical skills with the ability to interpret data effectively. Experience conducting quality audits and implementing quality management systems. Proficiency in using measurement tools such as calipers and gauges. Excellent attention to detail. Ability to work collaboratively in a team-oriented environment while maintaining independence when necessary. Strong communication skills, both verbal and written. Basic computer skills, familiarity with MS products is a plus Excellent organizational skills to manage multiple tasks effectively in a fast-paced environment. High level of dependability regarding attendance and punctuality. Ability to collaborate and work well within a team environment, and willingness to motivate and support others, supporting the Core Values of Fiber Pad. PHYSICAL REQUIREMENTS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job: Ability to use hands including fingers to hold, touch, see, feel, grip, squeeze, push and pull. Ability to perform pushing, pulling, forward exertion on a regular basis. Ability to see near and far, utilize peripheral vision and depth perception for tasks being performed. Ability to have overhead extension with arms on a regular basis Ability to use enhanced levels of manual dexterity with arms and hands to operate taping and packaging materials, forklifts regularly and industrial power tools occasionally. Ability to stand and walk continuously on concrete floor for 10-hour shifts Ability stand, crouch, stoop, bend, kneel and squat frequently. Ability to climb ladders frequently. Ability to work from elevated surface such as a ladder frequently. Ability to bend and twist at the hip and waist area on a regular basis Ability to rotate neck to look backwards, up, down and sideways on a regular basis Ability to regularly lift and or move 45-55 lbs. Ability to understand and communicate verbally, in person and over paging system Ability to meet requirements of and utilize all PPE when required EDUCATION: High School Diploma or equivalent required. ENVIRONMENTAL CONDITIONS The environment described here is meant to be representative of those an employee would normally encounter while performing the essential functions of the job. The physical environment requires the employee to work inside in heat/cold, with exposure to production noise. Required to use PPE while performing job functions. SPECIAL JOB DIMENSIONS Work involves overtime and could involve schedule changes based on company need. Requires adherence to deadlines and project completion deadlines.

Position Type: Full Time Education Level: High School Job Shift: Day EDUCATION AND EXPERIENCE High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred. Non-Destructive Testing Certification preferred. Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT certified. What you will be responsible for: Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Must have weld inspection experience. AWS D1.1 experience is preferred. Working knowledge of Nondestructive Examinations and Powder Coating. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work onsite, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. To apply send resume to ***********************

QC Technician (Electrical Test) QC Tech Department: Operations Reports to: Quality Manager Job Type: Full Time Inspect and electrically test control panels in a manufacturing environment. Responsibilities Inspect panels for fit and finish. Continuity checking of electrical circuits and troubleshooting of wiring issues Variable frequency drive programming Programmable logic controller flashing and setup Attention to detail and self-motivated Must be able to accurately complete test reports and other paperwork Function testing of relay logic and PLC input/output to test drive, motor starters, etc. Contribute to the company's continuous improvement processes Requirements Must be detail oriented. Must practice good/safe housekeeping. Excellent verbal and written communication skills Must comply with PPE requirements. Ability to read and understand electrical schematics is required. This includes knowledge of schematic symbols, panel components and general wiring practices. Understanding of AC and DC circuits is required. Previous control panel building/testing experience is preferred. Previous experience with 480V industrial panels is highly preferred Current UL MTR certification is highly preferred-Includes shift differential Employee must be proficient in both spoken and written English Ability to distinguish colors Computer skills to include Word, Excel, Outlook Ability to stand for extended periods of time, work may also be required in a seated position. This position is a safety-sensitive position. I understand and acknowledge that this job description serves as an agreed upon list of roles and responsibilities, but that it may not be fully encompassing of the day-to-day position. My signature indicates my understanding and agreement. Employee Signature: _________________________________________ Date: ____________________ As an equal opportunity employer, AID complies with all applicable federal and state laws regarding non-discrimination and affirmative action. AID is committed to a policy of equal opportunity for all individuals and does not discriminate based on race, religion, age, sex, color, national origin, marital status, sexual orientation, gender identity/expression, disability, or veteran status with regard to employment. Must be able to pass a 7 year background check. We also conduct pre-employment drug testing. Any job offer will be based on the results of the background check and drug test.

Job DescriptionDirect Hire Opportunity Quality Control Inspector (Weld Inspector) - NIGHTS-$24+(Hourly)(2-3 years minimum experience) Carries out inspection and test activities in accordance with established quality plans, engineering specifications, and procedures in order to verify that the specified requirements for the product have been met. Monitor overall construction performance regarding technical quality and compliance with design and specification requirements. Performs dimensional and visual inspection and/or testing of materials and products to determine compliance. Records the results, which provide evidence that the product has been inspected and/or tested. These records should show clearly whether the product has passed or failed in accordance with established criteria. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering drawings and Customer specifications. Run tests, keep record of defects, analyze products and oversees procedures. Must have working knowledge of all industry welding codes and standards including American Society of Mechanical Engineering, Boiler and Pressure Vessel Code Section VIII and National Board of Inspection Code for Repairs and Alterations of Pressure Vessels. Working knowledge of Nondestructive Examinations, Heat Treating, Paint and Protective Coatings. Must be able to use a variety of precision and non-precision inspection and test equipment. Inspector is expected to interface with Manufacturing and Engineering personnel and provide support, if necessary, in interpreting and defining product quality criteria. This position may also require operating overhead or jib crane. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. High school diploma or GED. Experience with calibration of inspection and test equipment preferred. Experience in an ISO 9001 environment preferred.

Quality Control Technician - Entry Level Duration : 4 Months contract Total Hours/week : 40.00 1 st Shift Client: Medical Devices Company Job Category: Quality Level Of Experience: Entry Level Employment Type: Contract on W2 (Need US Citizens Or GC Holders Only) Working hours: 6:00AM - 4:30PM Job Description: Summary of job functions: Responsible for the implementing of quality inspection plans for in-process production and final release. Responsible for the timely closure of Device History Records for in-process Finished Goods - including assistance with the investigation and closure of Non-Conforming Material Reports at the Interventional Specialties Manufacturing facility, Mannford, OK. Principal Accountabilities: Is responsible for the scheduling and implementation of quality inspection plans for in-process production and final release. Performs final DHR release for in-process finished goods. Provides supplemental quality support to on-going projects and technical service requests. Assists with the investigation and closure of applicable Non-Conforming Material Reports. Works with management to enhance the quality system with the Mannford facility. Provides proactive feedback to Manufacturing and Material personnel on quality issues. Applies analytical and problem solving techniques in the normal course of daily activities. Knowledge of FDA, ISO, EN, QSR (GMP's), GLP and other regulatory requirements related to the manufacture of medical devices. Knowledge of statistical techniques as related to sampling. Other duties as assigned by the Quality Lead or Production Quality Engineer Position Requirements: High School Diploma or GED with minimum of 2 years' experience in the quality system of the Mannford facility (or equivalency). Must have good communication skills and be able to explain and demonstrate technical methodologies to all levels of the organization. Must be highly motivated and be able to multi-task and prioritize on a daily basis. Must be able to lead applicable Production personnel by example.

Perform in-process and final inspections of electro-mechanical assemblies. This typically includes various mechanical assemblies, piping, brackets and wiring, lighting, boxes, etc. What you will be responsible for: * Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. * Must be able to effectively use, read and interpret a tape measure. * Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. * Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. * The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. * Must be able to read and interpret Engineering drawings and Customer specifications. * Must have weld inspection experience. AWS D1.1 experience is preferred. * Working knowledge of Nondestructive Examinations and Powder Coating. * Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. * Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. * Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. * Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. * Mag Particle Inspection, preferred. COMPETENCY OR POSITION REQUIREMENTS * Ability to read and comprehend simple instructions, short correspondence, memos, and procedure manuals in English. Ability to write simple correspondence in English. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization. * Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to compute percent and to draw and interpret bar graphs * Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. Ability to deal with problems involving several concrete variables in standardized situations. * Personal computer skills including electronic mail, record keeping, routine database activity, etc. are preferred. EDUCATION AND EXPERIENCE * High school diploma or GED. Experience with calibration of inspection and test equipment preferred. * Experience in an ISO 9001 environment preferred. * Non-Destructive Testing Certification preferred. * Ultrasonic Testing Inspector must have prior Level II experience. Preferably UT * certified. At Kelvion we thrive on collaboration, embracing diversity of thought, and valuing every voice. Within Kelvion creativity shines because people are listened to, their contributions recognised, and their ideas welcomed. Our flexible approach to the way we work places people's health and satisfaction as a priority, enhancing engagement and fostering career opportunities. We empower engaged individuals to grow, progress and carve their own paths within the company. Together, We Shape the Future

LOOKING FOR EXPERIENCED QUALITY CONTROL INSPECTOR FOR WEST TULSA FAB SHOP FOR NIGHT SHIFT, WORK HOURS 3:30PM - 1:30AM. MONDAY-FRIDAY MUST READ MICS, CALIPERS, READ BLUEPRINTS AND TAPE MEASURE. MUST WORK IN TIGHT SPACES AND ON KNEES ALOT FOR THE JOB. BEND, STOOP. APPLY IN PERSON AT: LLOYD RICHARDS PERSONNEL 4619 S. HARVARD AVE. SUITE 105 TULSA, OK 74135 BRING RESUME, DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY FROM 9:00AM-2:00PM

Job DescriptionQuality Control Inspector (Electro/Mechanical) Carries out inspection activities in accordance with established quality plans, engineering specifications and procedures in order to verify that the product meets specified requirements. Must be able to effectively use, read and interpret a tape measure. Performs incoming, in-process and final dimensional and visual inspection of materials and assemblies to determine compliance. Electronically records the results to provide evidence that the product has been inspected, whether accepted or rejected. The Inspector is required to handle any nonconforming product in accordance with established work instructions and other quality system procedures. Must be able to read and interpret Engineering blueprints and Customer specifications. Detail oriented and must have experience inspection mechanical, electrical, and structural assemblies or installations. Inspection will work closely with Manufacturing to ensure full compliance to Engineering requirements. Regular attendance, ability to arrive at work punctually, ability to work on-site, ability to work overtime. Ability to work cooperatively with others, ability to deal respectfully with the public, customers, vendors, other employees, managers, and executive management. Ability to perform multiple tasks concurrently, ability to work in a fast-paced environment, ability to interchange with others in the department. Experience with pneumatic pressure or leak testing, preferred. Any NEC-code experience preferred. High school diploma or GED. Experience with calibration of inspection and test equipment mandatory 2-3 years experience. Experience in an ISO 9001 environment preferred