Quality control analyst jobs in Mobile, AL - 540 jobs

CF Industries has many exciting and challenging opportunities at its world class production facility in Yazoo City Mississippi. The employee in this position will be responsible for the analysis of a wide range of samples submitted by the Yazoo City Complex to ensure they meet quality specifications. These include in process samples, raw products, and finished products. The employee will also perform routine analysis on environmental samples, quality control and calibration of laboratory instrumentation, and data entry. JOB RESPONSIBILITIES: Receive and log samples into LIMS system Perform Analytical Chemistry testing as required Prepare Reports of Analytical Chemistry Results Check, Calibrate, and Maintain Laboratory Equipment SUCCESSFUL INCUMBENTS WILL HAVE: Bachelor's degree in chemistry from an A.C.S. accredited chemistry program is preferred. Bachelor's Degree in other physical science disciplines will be considered if strong evidence of laboratory analytical chemistry skill is demonstrated Minimum of 1 year of Analytical Chemistry laboratory experience preferred Experience with ICP, UV-VIS, GC, IC, and FT-IR, is valuable Excellent written and verbal communication skills required. Both informal and formal data reporting and use of IT will tools be required Presentation skills sufficient to communicate thoughts succinctly to Lab Supervisor and Operations managers Proficient with Microsoft Office tools including Outlook, Word, Excel and PowerPoint Excellent time management skills and be comfortable working in an environment where priorities change rapidly Applicants considered for this position will be required to perform analytical skills or techniques to demonstrate proficiency (Examples: Spectroscopy, Chromatography, Qualitative Analysis etc.) POSITION SCOPE/CONTRIBUTION: The Chemist in this position will work closely with one or more quality control technicians and will be responsible for analysis of a wide range of samples submitted by the Yazoo City Complex. Certain samples will need to be collected by the lab. Samples are analyzed to ensure they meet quality specifications as set by the company and our customers. Employees working in this lab must be fully committed to CF's Environmental, Health, Safety, Security, and Quality objectives. This position requires 12 hour rotating shifts, mandatory overtime, and weekends.

About AEL: Advanced Environmental Laboratories, Inc. (AEL) is Florida's largest environmental, chemical, analytical testing laboratory network. AEL has been in business for over 30 years and is a leader in the industry with modern instrumentation, computer technology, and opportunities of growth for our employees. Are you passionate about the environment? Join AEL! We are currently looking for senior and mid-level analysts for our AEL Gainesville, FL laboratory. This hire will join our growing team to support our mission of delivery high quality environmental data for our clients across Florida. Pay and Benefits: This is a full-time position with benefits including Health/Dental/Vision Insurance (60% paid by AEL), Floating Holiday, PTO, short and long term disability + life term insurance paid by AEL, and 401K retirement plan with up to 4% Company match. Salary based on experience. Job Description: Senior Analyst will be responsible for analyzing samples using manual and more complex instrumental and reporting techniques in accordance with prescribed methods, standard operating procedures, regulatory agency standards as well as client specifications. Aids in method development of new analyses and works on special projects as they arise. Provides extensive guidance for lower level analysts. Minimum Qualifications: Education: BS in Chemistry, Biology, Environmental Science, or equivalent Experience: 2 or more years as Analyst II or 5 years experience at another analytical laboratory High level reporting skills, Advanced instrument care and maintenance Ability to train others Continued Technical Skills, Knowledge, and Abilities: Analyze samples consisting of soil and water matrices using traditional laboratory technologies. Prepare samples for analysis while displaying good laboratory technique to avoid cross-contamination or misidentified samples. Accurately prepare calibration curves and quality control samples. Interpret and evaluate data in terms of accuracy, precision, trends, and quality control requirements. Maintain laboratory equipment by cleaning, and otherwise ensuring ongoing proper working order. Report equipment issues to Department Manager. Collaborate with the laboratory team to meet reporting deadlines. Ability to perform method validations, or verifications as needed. Manage inventory supplies and alert supervisor in advance when materials must be ordered May participate in root cause analysis for quality assurance. Assist with training, scheduling and supervision of lower level analysts and technicians on instrumentation and methodology. Participate in the development and updating of departmental SOPs. Other duties and special projects as assigned. Duties and Responsibilities: Adhere to Laboratory Standard Operation Procedures (SOPs), EPA methods, and Standard Methods Perform all duties associated with sample analysis of more complex laboratory tests. Analyze, interpret and review sample results, as well as, peer review of departmental data. Perform all quality control requirements associated with the methods and maintain appropriate records. Perform all work within established quality control parameters and within specified turnaround times. Troubleshoot and fix instruments as needed. Maintain high productivity, keen attention to detail, and consistent multi-tasking while yielding a low testing error rate. Strong agility, engagement, and flexibility in an ever-changing environment. Diligent commitment to organizing, analyzing and reporting data. Excellent communication skills and ability to effectively work, problem solve, and communicate with multiple levels of the organization. Provide department managers daily status information May be assigned duties to help manage Health and Safety and/or Hazardous Waste program

We're looking for a QC Mechanical Inspector who takes pride in precision work and ensuring machined parts meet strict quality requirements. This role focuses on in-process inspection, verifying mechanical components throughout production, and supporting a strong quality culture on the shop floor. It's a great fit for someone detail-oriented, hands-on, and comfortable working in a machining environment. **No Relocation Assistance Provided** Key Responsibilities Perform in-process inspections on machined parts to confirm dimensional accuracy and workmanship. Inspect mechanical components using measurement tools and verify results against blueprint requirements. Document inspection findings and communicate issues clearly to production and quality leadership. Support quality control activities that help prevent defects and improve consistency. Assist with CMM-based inspection activities when needed (experience is a plus). Qualifications Experience inspecting machined parts in a manufacturing or machine shop environment. Strong mechanical inspection skills and understanding of machining processes. Ability to read and interpret blueprints and inspection requirements. Familiarity with standard inspection tools such as calipers, micrometers, gauges, and comparators. Attention to detail and ability to identify nonconforming conditions early. Experience performing in-process inspection in support of production quality. CMM experience is a plus but not required. Strong communication and organizational skills. Equal Opportunity Statement Design Hire is proud to be an Equal Employment Opportunity / Affirmative Action employer. It is our policy to consider for employment all individuals regardless of age, color, national origin, citizenship status, physical or mental disability, race, religion, gender, sex, sexual orientation, gender identity and/or expression, genetic information, veteran status, or any other characteristic protected by federal, state or local law. Employment Eligibility If hired, a Form I-9 Employment Eligibility Verification must be completed at the start of employment. Temporary work authorization or the need for sponsorship may disqualify you from employment.

📌 Quality Control Inspector 📍KeyStone Heights, FL 💰 Compensation: $38-45/hr (1.5× over 40 hrs, 2× over 50 hrs) 🚀 Why This Role Matters This position is essential to ensuring that all welds, materials, and fabricated components meet strict codes and quality standards. By maintaining compliance, supporting production teams in real time, and reinforcing quality processes, you'll help drive reliability, safety, and precision across high-tonnage fabrication operations. 🎯 Key Responsibilities Perform visual inspections, dimensional checks, layout verification, and welding parameter monitoring Maintain QC documentation, logs, and inspection records Support welder qualification testing and coordinate QC hold points Conduct bolt rotational capacity tests and assist with Total Station measurements Collaborate closely with welders, lead personnel, production teams, shipping, and external inspectors Communicate real-time quality decisions to keep production accurate and compliant ✅ Ideal Candidate Profile Required: Current CWI or ASNT VT Level II certification Strong blueprint reading and knowledge of welding codes Proficient with measurement tools and visual inspection techniques Detail-oriented, safety-focused, and strong communicator Preferred: ASNT MT Level II, UT Level II, NACE/SSPC BCI Level I, or heavy fabrication shop experience Submit resume to ************************** or apply online.

The Microbiology Laboratory Technician III supports the operation and maintenance of teaching laboratory facilities and equipment within the Department of Biological Sciences. This role is responsible for preparing, distributing, setting up, and breaking down laboratory materials for microbiology and immunology core courses, as well as upper-division elective laboratories. The position also assists faculty with instructional laboratory needs, coordinates the acquisition and maintenance of supplies and equipment, and ensures compliance with departmental, university, and applicable local, state, and federal safety regulations. The Laboratory Technician III contributes to student success by fostering a high-quality learning environment, supporting continuous improvement and innovation, and serving as a team lead to resolve escalated issues and ensure uninterrupted laboratory operations. Typical duties include but are not limited to: * Prepares solvents, solutions, reagents, and maintains bacterial stock cultures, and apparatuses according to course schedules and proper scientific guidelines for microbiology and immunology-focused courses. * Ensures chemicals are stored in the correct manner according to safety codes, regulations, and best practices. * Prepares and maintains laboratories facilities for teaching instruction for microbiology and immunology courses to ensure safety, organization, and proper use of equipment for effective scientific operations. * Responsible for set up and breakdown of equipment. * Oversees safe handling and disposal of biohazardous materials, chemical waste, and sharps. * Participates in environmental health and safety audits, maintains accurate records, and ensures compliance with safety regulations of science laboratories. * Provides training on proper usage of laboratory equipment and safe laboratory practices including safe handling and disposal of biohazardous materials, and standard policies and protocols for reporting unusual events. * Performs routine maintenance and inspections to ensure optimum calibration and condition of equipment. * Develops and updates laboratory standard operating procedures and preparation protocols to meet evolving requirements related to student success and learning in supported courses. * Works with faculty teaching supported courses to ensure the efficacy, effectiveness, and viability of alternative laboratory preparations. * Demonstrates and troubleshoots new laboratory preparations in partnership with teaching faculty to ensure protocols are usable and meet college-level standards and the course's learning objective. * Maintains accurate records on equipment maintenance and acquisition of supplies. * Trains and supervises student lab assistants on the proper use of laboratory equipment, chemicals, and all applicable safety protocols. * Supervises and trains graduate assistants who support laboratory preparations that could include laboratory set-ups and breakdowns as well as media and solution preparations * Purchases and orders materials and supplies used in supported courses. Tracks expenditures in supported courses. Other Duties * Performs other job-related duties as assigned. Additional Job Description Required Qualifications: * This position requires either six years of directly related full-time experience or, as an alternative, an Associate's degree from an accredited institution in an appropriate area of specialization (or equivalent coursework in a relevant field of study) and four years of full-time experience directly related to the job functions. * Full-time experience in a laboratory setting. * Experience generating microbiological media, familiarity with autoclaving materials, maintenance of bacterial stock cultures, and basic molecular techniques including PCR and gel electrophoresis. * Experience operating a personal computer and proficient with Microsoft Office (Work, Excel, and Outlook). * Any appropriate combination of relevant education, experience, and/or certifications may be considered. Preferred Qualifications: * Bachelors' Degree from an accredited institution in Microbiology, or other appropriate Natural Science. * Two years of experience in a microbiology laboratory. * Laboratory experience in an academic setting. * Experience with microbiology, genetics, cellular biology, and/or molecular biology preparations. * Experience working with students. Knowledge, Skills & Abilities: * Knowledge of the use and maintenance of laboratory facilities and/or equipment. * Knowledge of laboratory and experimental protocols and procedures. * Knowledge of inventory control principles and methods. * Knowledge of applicable safety standards, guidelines, and protocols. * Strong interpersonal, verbal and written communication skills. * Excellent organizational skills and an ability to prioritize and complete simultaneous projects within deadlines. * Ability to prepare stock chemicals according to given standards. * Ability to understand and follow directions. * Ability to maintain records and perform basic mathematical calculations. * Ability to work successfully as both a member of a team and independently with minimal supervision. * Ability to interact in a professional manner with staff, faculty, students, and the community in a service-oriented environment. * Ability to collaborate with classroom instructors to ensure delivery of a quality laboratory experience to students in a laboratory/classroom setting. * Ability to prepare and set-up appropriate laboratory materials and equipment for various laboratory activities. * Ability to utilize, calibrate, configure and/or troubleshoot laboratory equipment and instruments. * Ability to work an irregular schedule as needed, including evenings and weekends, to accommodate class scheduling. Pay Grade 15 FGCU is a State University System of Florida member and an Equal Opportunity and Equal Access employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, age, national origin, disability, or protected veteran status.

PRIMARY FUNCTION: Primarily responsible for verification of production processes, packaging, food safety and monitoring of operational sanitation. Responsible for proper documentation, inventory control, and release of hold product. Assist production Team Members, Team Leaders, and Supervisors in assuring that safe and quality products are produced according to specification. Performs all work in compliance with company policies, NCC Animal Welfare Guidelines and local, state and federal policies, laws and regulation RESPONSIBILITIES AND TASKS: Under minimal supervision, communicate with Production & QA Team Members, Team Leaders, and Supervisors to assure proper handling of all products and timely correction of deficiencies Monitor lines and paperwork throughout the day to assure specification compliance for each product Verify and help enforce GMP's Verify labels, lot codes, bags, boxes, and pallets are correctly adhered, printed, sealed, and stacked Verify receiving of incoming raw materials and ingredients, informs Shipping/Receiving Team Leader and QA Team Leader or QA Coach if any product does not meet specifications Assist Production with day to day quality problems to reach workable solutions Assure microbiological swabs and samplings are performed at correct times and correct positions Assist in making sure all quality and food safety policies and procedures are being followed Work in compliance with all company policies, NCC Animal Welfare Guidelines and local, state and federal policies, laws and regulations All other duties as assigned EDUCATION AND CERTIFICATIONS: High School Diploma or equivalent EXPERIENCE AND SKILLS: Minimum 1 year experience in quality assurance or 6 months WayneSanderson Farms employee Intermediate math (add, subtract, multiply and divide) and computer skills Detail oriented Must have the ability to effectively communicate in English, both verbal and written, with internal and external customers in a timely and professional manner; ability to communicate in multiple languages preferred Sound work ethic, honesty and moral character SAFETY REQUIREMENTS: Follow departmental and company safety policies and programs Must wear Personal Protective Equipment (PPE) at all times in areas where required. PHYSICAL REQUIREMENTS: Stand up to 8 hours. Lift up to 60 lbs. Exposure to wet and dusty environment. Frequently reaching, bending, stooping, kneeling and crawling. Work around raw, live animal odors Ability to work nights, weekends, holidays and extended shift hours We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

This position performs laboratory analyses utilizing standard methodologies and procedures. It typically performs laboratory tasks, including instrument-based analyses. This classification works under direction from senior staff. Salary Grade: 13 Please see Staff Compensation Structure or Skilled Crafts and Service Maintenance Compensation Schedule for salary ranges. For salary grade UC, these positions are "Unclassified" and salary ranges are determined by the hiring department. Department Profile: Mississippi State Chemical Laboratory (MSCL) is a state-appropriated regulatory agency for the State of Mississippi as well as a fee-for-service laboratory located on the campus of Mississippi State University. Our mission is to provide analytical data to ensure the quality, accurate labeling and safety of all fertilizers, animal feeds, human foods pesticides, and petroleum products sold in the State of Mississippi. Essential Duties and Responsibilities: 1. Perform duties with focus on customer service, such as: sample custody, laboratory preparatory work of samples, chain-of-custody protocols, use of the LIMS for sample tracking and data entry. 2. Ensures that all assigned analyses are performed within required holding times and laboratory established turnaround times. 3. Performs assigned analyses according to established QA/QC requirements, including all documentation and verifies that analytical level quality control criteria are met as required for compliance with appropriate regulations promulgated by federal agencies, state agencies, and other regulatory bodies. 4. Participates in proficiency tests (PTs) including conceptual knowledge to demonstrate analytical competency. 5. Calculates results generated in the process of laboratory analyses, evaluates against QA/QC standards, and reports final data. 6. Performs duties in advanced-level analytical techniques that could include: GC, GC/MS, LC, HPLC, ICP, ICP/MS, microbiological and/or other analyses as appropriate in areas of Chemical Regulatory, Industrial and Agricultural Services, Research, or Petroleum Products. 7. May maintain lab supply inventories and purchasing records. 8. May assist in preparatory work for more advanced procedures. 9. As a team member, participates in implementation of updated and new protocols and procedures. 10. Acquires new knowledge in the field by reading, attending seminars and workshops; participates in continuing education. 11. Performs related duties as assigned. Supervisory Responsibility Does not have supervisory responsibility. The above essential duties are representative of major duties of positions in this position. Specific duties and responsibilities may vary based upon departmental needs. Other duties may be assigned to the above consistent with the knowledge, skills and abilities required for the job. Not all of the duties may be assigned to a position. Minimum Qualifications: A professional employee with a bachelor's degree and demonstrated competence can begin work at the Lab Analyst I level. To start at the Lab Analyst II level, one must have a bachelor's degree, a minimum of 3 years of relevant experience, and the equivalent of a master's degree. For the Lab Analyst III level, a bachelor's degree, a minimum of 6 years of relevant experience, and the equivalent of a master's degree are required. Alternatively, a professional employee with a master's degree and a minimum of 1 year of relevant experience, along with demonstrated competency, can begin work at the Lab Analyst II level. To start at the Lab Analyst III level, one must have a master's degree and a minimum of 3 years of experience. Indicated education is required; no substitutions allowed. Preferred Qualifications: 1. Bachelor's degree in chemistry or in a related field. 2. Demonstrate competence in the principles, methods, and techniques of analytical chemistry. 3. Field and laboratory work experience beyond the minimum required. Knowledge, Skills, and Abilities: • Thorough knowledge of good laboratory practices (GLP), methodologies, and safety. • Thorough knowledge of concepts and principles of chemistry, biology, mathematics, microbiology and/or other related scientific fields. • Thorough knowledge of relevant regulations and quality control standards. • Ability to uphold principles of laboratory ethics as applied to the production of valid analytical data. • Possess problem-solving skills. • Ability to pay attention to detail and precision in conducting experiments and reviewing results. • Ability to adapt and learn to apply new techniques and technologies. • Ability to work both independently and as part of a team. • Ability to pass all proficiency tests and competencies. • Skilled in using laboratory equipment and computer software to conduct sample and data analysis. Working Conditions and Physical Effort Work in this class series is typically performed in a laboratory environment. It may require lifting up to 50 pounds; collecting samples in all weather conditions; wearing protective gear; being exposed to hazardous materials; working a flexible schedule including afternoons, evenings, designated holidays, and/or weekends. Instructions for Applying: Link to apply: *********************************** Link to apply: *********************************** All applicants must apply online and attach a cover letter, current resume or curriculum vitae, and the complete contact information for at least three professional references. Search, screening, and selection process will begin as soon as the required posting period is completed. Restricted Clause: Position is contingent upon continued availability of funding. Equal Employment Opportunity Statement: MSU is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, ethnicity, sex, religion, national origin, disability, age, sexual orientation, genetic information, pregnancy, gender identity, status as a U.S. veteran, and/or any other status protected by applicable law. We always welcome nominations and applications from women, members of any minority group, and others who share our passion for building a diverse community that reflects the diversity in our student population. What do I do if I need an accommodation? In compliance with the ADA Amendments Act (ADA), if you have a disability and would like to request an accommodation in order to apply for a position with Mississippi State University, please contact the Department of Human Resources Management at tel: ************** or *******************. If you have any questions regarding this policy, contact the Department of Human Resources Management at ************** or *******************. Upon request, sections of this job listing are available in large print, and readers are available to assist the visually impaired.

We are seeking a detail\-oriented Quality Control Inspector to join our commercial concrete construction team. This role is responsible for ensuring all concrete placement, finishing, and curing activities meet company standards, project specifications, and applicable codes. The ideal candidate has strong attention to detail, understands commercial concrete processes, and takes pride in delivering high\-quality work. Key Responsibilities: Inspect concrete placement, finishing, and curing on commercial job sites Verify compliance with project plans, specifications, and quality standards Monitor mix designs, slump tests, air content, and cylinder testing as required Identify defects or non\-conforming work and document findings Communicate quality issues to project managers and site supervisors Ensure corrective actions are implemented and verified Maintain detailed inspection reports and quality documentation Enforce safety and quality control procedures on job sites Assist with pre\-pour and post\-pour inspections Requirements Previous experience in commercial concrete construction or quality control preferred Knowledge of concrete materials, placement methods, and testing procedures Familiarity with ASTM, ACI, and local building codes (preferred) Ability to read and interpret construction drawings and specifications Strong attention to detail and problem\-solving skills Excellent communication and documentation skills Valid driver's license and reliable transportation Ability to work outdoors in varying weather Preferred Certifications (a plus, not required): ACI Concrete Field Testing Technician PCI, NICET, or similar quality control certifications Benefits Competitive pay based on experience Consistent commercial projects Opportunities for growth and advancement Supportive team environment Benefits package available [health, PTO, 401(k), etc.] "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"653176156","FontFamily":"Verdana, Geneva, sans\-serif","job OtherDetails":[{"field Label":"Industry","uitype":2,"value":"Industrial"},{"field Label":"Work Experience","uitype":2,"value":"1\-2"},{"field Label":"City","uitype":1,"value":"Mobile"},{"field Label":"State\/Province","uitype":1,"value":"Alabama"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"36695"}],"header Name":"Quality Control Inspector","widget Id":"417767000000072311","is JobBoard":"false","user Id":"417767000000181003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"417767000014010035","FontSize":"12","google IndexUrl":"https:\/\/krshrc.zohorecruit.com\/recruit\/ViewJob.na?digest=mTYiJKZ4mm9DMG9J5k1AgabawIncO7e01ctLwwzXb@Q\-&embedsource=Google","location":"Mobile","embedsource":"CareerSite","logo Id":"b4dx1fa6679ef38494e05a88f4245264c1d30"}

Job Title: Quality Control Technician A General Function: The Quality Control Technician A is responsible for performing in-process and final inspections to ensure compliance with drawings, specifications, and all applicable requirements. This role operates under the general supervision of a Quality Control Manager, Supervisor, or other designated manager. Typical Duties: The following statements describe the general nature and level of work performed and should not be considered an exhaustive list of responsibilities: * Inspect and/or test parts, assemblies, welds, and other manufactured products to ensure compliance with quality standards. * Document inspection results and test findings accurately. * Accept or reject materials and assemblies that do not conform to design specifications or approved deviations. * Inspect purchased parts and specialty items from suppliers, setting up disposition procedures for non-conforming materials. * Collaborate with engineering to explore alternative methods and consult with production supervision regarding product issues or faulty workmanship. * Maintain detailed records and files related to quality control inspections and product evaluations. Required Knowledge, Skills & Abilities: * Strong understanding of detail and assembly drawings used in manufacturing processes. * Knowledge of relevant codes, standards, and regulations applicable to the assigned manufacturing area. * Proficiency in using tools, gauges, measuring devices, and test equipment required for the inspection process. * Ability to maintain accurate inspection records and documentation. * Strong communication skills with the ability to interface effectively with plant supervisors, managers, and customer quality assurance personnel. Experience & Training: * High school diploma supplemented by coursework in drafting, applied mathematics, or industrial technology, with considerable to extensive experience in manufacturing processes. * Or, an equivalent combination of education and training that provides the required knowledge, skills, and abilities. * A minimum of 5 years "Shipbuilding" experience. Bollinger is an equal opportunity employer and is committed to providing employment opportunities to minorities, females, veterans and disabled individuals, and without regard to sexual orientation and gender identity.

We are currently accepting applications for future Quality Control Chemists. WHY CORERX CoreRx, a dynamic pharmaceutical technology company that empowers its employees with responsibility and offers a supportive and highly progressive work environment. At CoreRx you will find a challenging career path directed towards growth and opportunity. We employ talented, motivated people - team players who are innovative thinkers. We offer our employees a comprehensive, competitive program of benefits and a corporate culture based on core values that include innovation, a results-oriented focus and ethical behavior. If we do not have any positions that fit your needs at this time; We invite you to join our talent network and stay informed about future opportunities by submitting your resume. Thank you for choosing CoreRx as your employer of choice. DESCRIPTION The Analytical Chemist II is an integral part of the team, contributing to our success by performing raw materials and clinical and commercial pharmaceutical products testing according to compendial method and/or methods provided by analytical development team or clients. ESSENTIAL DUTIES AND RESPONSIBILITIES Performs relevant QC testing, such as HPLC, GC, Dissolution, Malvern and wet chemistry testing as required in compliance with cGMP requirements, compendia standards, and internal procedures Ensures testing is properly conducted and documented for all performed activities with emphasis on data integrity Prepare test solutions, volumetric solutions, and samples used in analysis Performs assigned physical tests, chemical tests and assay on raw materials, active pharmaceutical ingredients, in-process, finished, and stability products in an FDA regulated lab environment Perform analysis with a practical understanding of the test procedure and instrument operation Perform laboratory analysis right first time, contemporaneous documentation, analyze and document the results Conducts laboratory investigation under the supervision of laboratory manager. Complies with all regulatory/ in-house requirements may include but not be limited to safety, housekeeping, laboratory chemical waste, cGMP, documentation Maintain required level of training needed to perform a GMP task Notify manager immediately of nonconforming data or unexpected occurrences Organize work schedule to complete assigned tasks efficiently and on schedule Work under direction provided by manager Conscientious with safety procedures and knowledgeable of hazardous waste procedures Performs other related duties as assigned by management EXPERIENCE AND EDUCATION REQUIREMENTS Experience in UPLC/HPLC GMP operations Knowledge with analytical equipment and Part 11 compliant software, such as Chemstation™, Chromeleon™, EMPOWER™, and Laboratory Information Management System. Demonstrated ability to work as an independent, self-motivated, detail-oriented, result-driven and highly flexible team-player in a fast-paced working environment Proficient in Microsoft Office Suite or similar software Minimum of 2 years experience preferred in an FDA-regulated pharmaceutical environment Experience in other highly regulated laboratory settings will be considered BS/BA in life science or chemistry required Equivalent experience may substitute for stated requirements PHYSICAL DEMANDS Regularly required to stand. Frequently required to sit, walk, talk, hear, handle or feel tools or controls Occasionally required to reach with hands and arms, stoop, crouch, climb or balance, kneel Vision suitable for performing detailed inspections May be required to move items weighing up to 25 lb Ability to communicate clearly in both written and verbal form We are an equal opportunity/equal access/affirmative action employer fully committed to achieving a diverse workforce and complies with all applicable Federal and State laws, regulations, and executive orders regarding nondiscrimination and affirmative action with our hiring activities. We do not discriminate based on race, color, religion, ethnic or national origin, gender, genetic information, age, disability, sexual orientation, gender identity, gender expression, and veteran's status. Notification to Agencies: Please note that CoreRx Inc. does not accept unsolicited resumes from recruiters or employment agencies. In the absence of a signed Master Service Agreement, and specific approval to submit resumes to an approved requisition, CoreRx Inc. will not consider or approve payment regarding recruiter fees or referral compensation.

The Quality Control Chemist will play a crucial role in ensuring the excellence and consistency of our chemical products through rigorous testing and analysis. Position is full-time at the Sylacauga, AL plant laboratory reporting to the Director of Quality and Process Chemistry. (approximately 40 hours): Monday through Friday with flexibility to work additional hours and different schedules during peak customer demand times. Essential Duties & Responsibilities Conduct Quality Control Testing: Execute a variety of chemical and physical analyses on raw materials, intermediates, and finished products to guarantee compliance with established quality standards. Utilize analytical instrumentation, including but not limited to ICP-OES (Inductively Coupled Plasma Optical Emission Spectroscopy), HPLC (High Performance Liquid Chromatography), Gas Chromatography, Karl Fisher, Viscometer, Specific Gravity, and pH to perform quantitative and qualitative analyses. Perform method validation and verification for new testing methods in the laboratory. Data Analysis and Troubleshooting: Perform data analysis, identify trends, and troubleshoot issues, taking corrective actions as necessary. Compliance and Approval Checks: Ensure products meet specifications and conduct final product approval checks. Confirm label claims adhere to quality control specifications. Documentation, Record-Keeping, and Quality Assessment: Maintain meticulous and precise records of all testing procedures, results, and any deviations from anticipated outcomes. Generate Certificates of Analysis (CoA) for each product batch, providing comprehensive documentation of quality specifications. Assess daily quality parameters and quality systems, covering cross-checks, raw materials, calibration, maintenance, procedures, training, auditing, and oversight of analytical testing. Document standard operating procedures and identify trends in testing results using data analysis from daily result entries. Training and Support: Train new quality chemists, and provide technical support to stakeholders, investigating quality problems and implementing actions to follow up. Troubleshoot and Investigate: Identify and investigate any discrepancies from quality standards, collaborating with production and relevant departments to promptly resolve issues. Handle basic issues and problems under direct supervision, escalating more complex issues to appropriate staff. Continuous Improvement: Participate in continuous improvement initiatives by suggesting and implementing enhancements to existing testing methods and processes. Compliance and Safety: Guarantee that all quality control activities adhere to industry regulations and safety standards. Contribute to maintaining a safe, clean, and orderly laboratory environment. Other duties - Perform additional duties as assigned. Qualifications Qualifications Proficient understanding of analytical techniques and instruments. Exceptional attention to detail and accuracy in documentation. Ability to work independently and collaboratively in a team setting. Strong communication skills with the ability to convey complex information clearly. Education/Experience Bachelor or Master's degree in Chemistry or related field. 2+ years' work experience in plant nutrition formulation/development desired. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individual with disabilities to perform the essential functions. While performing the duties of this job the employee is regularly required to talk or hear. The employee is frequently required to sit and use hands to touch, handle, or feel. Prolonged periods sitting at a desk and working on a computer. The employee is occasionally required to stand, walk, reach with hands, and arms, climb or balance and stoop, kneel, or crouch. The employee is occasionally required to lift up to fifty pounds. The vision requirements include close vision and ability to adjust focus. Employees must be able to stand for extended periods of time. Working Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee will primarily be in a laboratory setting onsite, with occasional plant walk throughs to assist in quality related matters. The noise level in the work environment is typically minimal, with normal chemical manufacturing duties occurring daily. The statements herein are intended to describe the general nature and levels of work performed by employees, but are not a complete list of responsibilities, duties, and skills required of personnel so classified. Furthermore, they do not establish a contract for employment and are subject to change at the discretion of the employer.

Today, Lonza is a global leader in life sciences operating across three continents. While we work in science, there's no magic formula to how we do it. Our greatest scientific solution is talented people working together, devising ideas that help businesses to help people. In exchange, we let our people own their careers. Their ideas, big and small, genuinely improve the world. And that's the kind of work we want to be part of. Lonza Tampa is seeking a QC Chemist to join the Quality Control team. The incubment will be Conduct analysis of raw materials, In process items and finished products Key Accountabilities * Analysis of dry product stability and finished product samples according to the assigned specifications, analytical methodology and protocols in a GMP laboratory setting with emphasis on attention to detail and accuracy of execution. * Documentation of results in accordance with cGMP * Comply with FDA, EPA and OSHA regulations, performing all work in a safe manner. * Reports lab testing data and completes documentation accurately and in accordance with laboratory procedures and regulatory requirements * Reviews results for conformance to standards * Perform analytical testing of pharmaceutical products following analytical methodology * Read and interpret analytical methodology and the USP * Supports method development and validation of new methods * Performs investigations and completes CAPA in response to deviations. * Develops and executes validation protocols for test methods and equipment qualification as requested. * Meet fundamental cGMP requirements relating to conduct and work practices to ensure the SISPQ (Safety, Identity, Strength, Purity, and Quality) of the all products manufactured/tested at Lonza Tampa. * Adhere to all defined Safety and Sustainability requirements and expectations and seek clarification whenever Safety and Sustainability requirements and expectations are either unknown or unclear * Promptly report identified Safety and Sustainability issues, problems, deficiencies, errors, incidents, and/or opportunities to management and correct where possible * Stop work where deemed necessary to maintain safety Key Requirement * Associate's Degree in Science, preferably chemistry * Minimum of 3 years experience in a GMP pharma environment * Actively participates in customer and regulatory audits * Demonstrated experience with peer review work and data of other analysts to ensure compliance with method and regulatory requirements Every day, Lonza's products and services have a positive impact on millions of people. For us, this is not only a great privilege, but also a great responsibility. How we achieve our business results is just as important as the achievements themselves. At Lonza, we respect and protect our people and our environment. Any success we achieve is no success at all if not achieved ethically. People come to Lonza for the challenge and creativity of solving complex problems and developing new ideas in life sciences. In return, we offer the satisfaction that comes with improving lives all around the world. The satisfaction that comes with making a meaningful difference. Lonza is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status as a qualified individual with disability, protected veteran status, or any other characteristic protected by law.

Job Description Job Title: Chemical Technician Contract: 12 Months Roles and Responsibilities · BS degree in Chemistry or other field of science with a MINIMIMUM of 12 semester hours in Chemistry required. · Experience and competency in the use, calibration and maintenance of laboratory instrumentation/equipment; knowledge of proper analytical methods and techniques. · Experience and competency in the proper operation and maintenance of a water treatment plant. · Broad knowledge of analytical, inorganic, environmental and water chemistries · Detailed knowledge of chemical treatment methods and operation of water treatment plant is preferred · Ability to troubleshoot mechanical systems, read and understand schematic diagrams and identify plant water process problems · Proficiency in various Microsoft applications including Word, Excel, PowerPoint and Outlook. Special Notes · Is this assignment supporting a government-related project? -No · Does this assignment require driving (excluding commute)? - No · Does this assignment require personal protective equipment (PPE)?-Yes · Does this assignment require NERC/CIP access?- No · Schedule would be Monday - Friday 6:00 am - 2:30 pm; Once trained this position requires five 8-hour workdays, including weekend and holiday support. Must be available for callouts, nights, overtime, weekend, and holiday work as required. Thanks and Regards Sr. Talent Acquisition Specialist Pankaj Mishra ********************************* ***************

Science you can trust from concept to consumer. Since 1967, Deibel Laboratories has operated several private food testing facilities providing services in both Microbiology and Chemistry testing. We play an integral role in food and product safety for industry-leading producers, as well as family-run operations much like our own. Our lab location in Lakeland, FL is hiring a temporary to possible permanent full-time Food Laboratory Technician. (40 hours/week plus benefits included). We offer a competitive salary based on knowledge and experience. This position includes full health benefits for self and family (employer pays for 100% of employee premiums and 50% of dependents on our base plan). Deibel also offers a self-funded dental plan, vision plan, and 401K option along with profit sharing. Check out our website to learn more about what we do at ******************* Compensation : Starting hourly rates $16.50 - $17.50 D.O.E. plus a competitive benefits package. Shift Available: Tuesday - Saturday 10:30am - 7pm (Temporary to possible permanent) Required Skills/Abilities: Entry Level Position: We Are Happy to Train Must have an interest in learning basic knowledge of microbiology and to accurately perform testing procedures and obtain accurate results. A basic knowledge of personal computers is useful to accurately enter testing data and results. Planning skills are useful to maintain supplies of analysis materials and ensure analysis is completed within a specified time. Basic math skills are essential to complete analysis. Physical dexterity is required for manipulating samples. We'd Love to Hear from People With: Previous experience in manufacturing, production, warehouse, food industry, food service, baking, baristas, or retail. Strong problem-solving skills, ability to multitask, and work in a fast-paced environment. Skills to communicate effectively and develop good working relationships with all employees. A professional workplace appearance, ethical conduct, honesty, and integrity in all communications. A thirst to seek out and participate in appropriate training and professional development. Fluency in written and spoken English is required. Physical Requirements: Safety equipment of gloves, laboratory coat, and eyeglasses may need to be worn depending on the testing process. Extended time spent in a standing position. Ability to lift up to 50lbs occasionally and 10 - 15lbs repeatedly.All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Deibel is committed to fostering a diverse and welcoming workplace with people of all types of backgrounds and experiences.SERVICE - QUALITY - TRANSPARENCY - PARTNERSHIP - EDUCATION - PROFESSIONALISM

Science you can trust from concept to consumer. Since 1967, Deibel Laboratories has operated several private food testing facilities providing services in both Microbiology and Chemistry testing. We play an integral role in food and product safety for industry-leading producers, as well as family-run operations much like our own. Our lab location in Lakeland, FL is hiring a temporary to possible permanent full-time Food Laboratory Technician. (40 hours/week plus benefits included). We offer a competitive salary based on knowledge and experience. This position includes full health benefits for self and family (employer pays for 100% of employee premiums and 50% of dependents on our base plan). Deibel also offers a self-funded dental plan, vision plan, and 401K option along with profit sharing. Check out our website to learn more about what we do at ******************* Compensation : Starting hourly rates $16.50 - $17.50 D.O.E. plus a competitive benefits package. Shift Available: Tuesday - Saturday 10:30am - 7pm (Temporary to possible permanent) Required Skills/Abilities: Entry Level Position: We Are Happy to Train Must have an interest in learning basic knowledge of microbiology and to accurately perform testing procedures and obtain accurate results. A basic knowledge of personal computers is useful to accurately enter testing data and results. Planning skills are useful to maintain supplies of analysis materials and ensure analysis is completed within a specified time. Basic math skills are essential to complete analysis. Physical dexterity is required for manipulating samples. We'd Love to Hear from People With: Previous experience in manufacturing, production, warehouse, food industry, food service, baking, baristas, or retail. Strong problem-solving skills, ability to multitask, and work in a fast-paced environment. Skills to communicate effectively and develop good working relationships with all employees. A professional workplace appearance, ethical conduct, honesty, and integrity in all communications. A thirst to seek out and participate in appropriate training and professional development. Fluency in written and spoken English is required. Physical Requirements: Safety equipment of gloves, laboratory coat, and eyeglasses may need to be worn depending on the testing process. Extended time spent in a standing position. Ability to lift up to 50lbs occasionally and 10 - 15lbs repeatedly.All qualified applicants will receive consideration for employment without regard to race, color, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. Deibel is committed to fostering a diverse and welcoming workplace with people of all types of backgrounds and experiences.SERVICE - QUALITY - TRANSPARENCY - PARTNERSHIP - EDUCATION - PROFESSIONALISM

Are you ready to start "Building America"? At Lexicon, we're seeking a skilled Quality Control Inspector to join our team and be a part of our continued success. Offering competitive pay ranging between $35-$47 with a $100/day per diem, this role presents an exciting opportunity for growth and development! If you're passionate about being a part of a team that values integrity, teamwork, and innovation, then Lexicon is the place for you. Join us and become a part of our growing family as we continue to build a brighter future together. Apply now to embark on an exciting journey with Lexicon! Lexicon Benefits * Health, Dental, Vision, and Life Insurance * HSA with employer contributions * Life Insurance * Paid Holidays and Vacation * 401k with company match * Lexicon University Our Lexicon University provides free career development and training, so employees can improve their skills in their chosen field, learn new skills in another area and build a career path that leads to job satisfaction and success for them and their families. Quality Control Inspector Overview: Join us as a Quality Control Inspector, where you'll play a pivotal role in upholding the highest standards of production in our fabrication shop. Your responsibilities will include ensuring adherence to shop drawings and American Welding Society specifications, guaranteeing the quality and integrity of materials. Safety is paramount in this position, as any oversight in performing essential duties could pose risks to our team and the wider community. If you're ready to make a meaningful impact by maintaining excellence and safety in our operations, this opportunity awaits you. Join us in shaping a future where quality and safety go hand in hand. Quality Control Inspector Pay Range: * $35-$47/hour * Paid WEEKLY Quality Control Inspector Essential Duties and Responsibilities: * Inspect structural steel for plumb, level, and elevation per AISC Codes and Standards. * Inspect welding and handling of welding materials for compliance with drawings and governing standards. * Inspect bolted and/or riveted structural connections by fastening materials, faying surfaces, tension, etc. * Assist in the inspection of materials received on the job site. * Assist in the inspection of all phases of steel erection, equipment installation, etc. * Perform on site internal audit to confirm, or establish compliance with AISC, AWS, and company QA/QC Manual. * Ensures compliance of AISC and AWS Standards with company subcontractors. * Work within guidelines provided in company QA/QC Manual and apply codes and standards offered by related governing bodies such as AISC and AWS. * The ability to work overtime and regular, punctual attendance is required. * Perform non-essential functions as needed. Quality Control Inspector Qualifications: * High School education or the equivalent is required. * Minimum of two years' experience in construction industry and/or welding. * Certified Welding Inspector (CWI) may be required. Must be proficient in reading and interpreting structural steel drawings. * Must have excellent communication skills. Quality Control Inspector Physical Demands: * Must be able to climb to heights more than 300 feet. * Overtime and overnight travel are required. * Must be able to lift to 100 pounds occasionally. * Must be able to tolerate loud noises and temperature fluctuations. This role is classified as safety sensitive. Candidates must show the capacity to proactively initiate, effectively lead, and consistently uphold safety policies, practices, procedures, and housekeeping standards. Compliance with this requirement is a fundamental condition for employment. Accessibility: If you need an accommodation as part of the employment process please contact Human Resources at Email: ********************* Drug Free Workplace Equal Opportunity Employer, including disabled and veterans. If you want to view the Know Your Rights: Workplace Discrimination is Illegal poster, please choose your language: English - Spanish - Arabic - Chinese English - Spanish - Chinese To see other positions, click here.

The Microbiology Analyst I is responsible for performing routine microbiological testing in support of product quality, regulatory compliance, and laboratory operations. This entry-level position provides hands-on experience in pharmaceutical, biotech, or regulated laboratory environments and supports environmental monitoring, raw material testing, and finished product release. Key Responsibilities Perform routine microbiological testing including: Bioburden testing Environmental monitoring (air, surface, and personnel) Microbial identification and enumeration Perform aseptic sample handling and plating techniques Incubate, read, and record microbiological test results Document all testing in accordance with GMP, GDP, and SOP requirements Enter data into laboratory systems (logbooks, worksheets, spreadsheets) Identify and report deviations, atypical results, or out-of-specification findings Clean, sanitize, and maintain laboratory work areas Assist with equipment calibration and maintenance Support investigations, method validations, and audits as needed Required Qualifications Bachelor's degree in Microbiology, Biology, Biochemistry, or related science Basic understanding of microbiology techniques (from coursework or internships) Familiarity with sterile technique and aseptic handling Ability to follow written procedures and detailed instructions Strong attention to detail and good documentation practices Preferred Qualifications Experience in a regulated laboratory (pharma, biotech, medical device, food, or environmental) Knowledge of GMP, GLP, or ISO standards Experience with: Plate counting Gram staining Environmental monitoring Autoclaves, incubators, and biosafety cabinets Physical & Work Environment Requirements Ability to stand for extended periods Ability to lift up to 30 lbs Work in a laboratory environment with biological materials and disinfectants Wear appropriate PPE including lab coat, gloves, and eye protection

Verdant Specialty Solutions is a dynamic, innovation-driven specialty chemicals company with a global footprint. Born from the McIntyre Group of the 1970s and relaunched in 2021, Verdant combines the agility of a small business with the safety, reliability, and scale of a larger organization, offering personal attention backed by industry-leading manufacturing and technical capabilities. With over 375 product offerings, nine strategic sites across the U.S. and Europe, and a steadfast commitment to sustainability, compliance, and customer-centric solutions, Verdant brings functional chemistry to life safely, reliably, and responsively. Are you a hands-on chemist who loves ensuring quality, safety, and operational excellence? Verdant Specialty Solutions, a global specialty chemical company serving world-leading consumer, industrial, and energy brands, is looking for a Quality Control Chemist to join our University Park team. Why this role is exciting: * Play a key role in a fast-growing, start-up-like environment with global impact * Work with cutting-edge specialty surfactant chemistries for top-tier clients * Contribute directly to safety, quality, and operational excellence across multiple sites * Opportunities to grow professionally in a collaborative, innovative culture What you will do: * Perform in-process, final product, and raw material analyses * Certify products for shipment and maintain accurate lab records * Collaborate with operators, engineers, and QC colleagues to optimize processes * Participate in process improvements, investigations, and quality initiatives * Maintain compliance with ISO 9001, EFfCI, GMP, RSPO, and HSSE standards * Operate lab systems (SAP) to track data, generate certificates, and manage inventories

Pay: $16.00/hour (Full-Time, Non-Exempt) Let's Be Blunt Cannabis isn't just an industry - it's a movement. At Mint Cannabis, innovation and precision drive everything we do - especially in our production labs. We're looking for a Formulation Technician to join our team and help create high-quality cannabis products by carefully blending distillates, terpenes, and other components. This hands-on role is perfect for someone who's detail-oriented, science-minded, and passionate about product consistency and safety. You'll work alongside our production and extraction teams to ensure every batch meets Mint's high standards for quality and compliance. Ready to mix things up and make an impact? 🌱 Let's make it happen. What You'll Do Accurately measure, mix, and blend cannabis distillates and terpenes according to established formulations and SOPs Operate and maintain laboratory equipment and mixing tools in a clean, safe, and compliant manner Assist in the preparation of raw materials and finished products for packaging and testing Follow safety and sanitation procedures to maintain a compliant work environment Conduct visual inspections and quality checks during formulation to ensure consistency and accuracy Collaborate with production leads and management to troubleshoot and optimize processes Maintain organization and cleanliness of the formulation lab and storage areas Support inventory tracking of ingredients, materials, and finished batches What You'll Bring 1+ year of experience in a production, laboratory, or food/pharmaceutical manufacturing environment (cannabis experience a plus) Strong attention to detail and ability to follow precise measurements and procedures Familiarity with basic lab or production equipment and safety protocols Strong organizational and record-keeping skills Ability to work efficiently in a fast-paced, high-volume environment Team player with good communication and collaboration skills Must be at least 21 years of age Must be able to obtain and maintain a Facility Agent Card in accordance with Florida state regulations Why You'll Love Mint Cannabis A work culture that's welcoming, passionate, and built on good vibes Opportunities for growth as we expand into new markets Employee discounts on Mint products and merch Health, dental, and vision benefits (for eligible roles) Paid time off to recharge and take care of you A chance to be part of something ama Zing 🌱 A Few Things You'll Need Ability to stand, bend, and perform repetitive tasks for extended periods Ability to lift up to 30 lbs Comfortable working around strong odors and raw cannabis materials Manual dexterity and visual acuity for precision measuring and mixing PPE required based on task or department policy About Mint Cannabis At Mint Cannabis, we're passionate about creating a premium cannabis experience - for everyone! Headquartered in Arizona, we're a national, multi-state operator proudly serving both medical patients and recreational customers. From state-of-the-art production facilities to dispensaries that redefine the retail experience, Mint is raising the bar in every market we enter. Our flagship location in Arizona - one of the largest dispensaries in the country - features a 24/7 storefront, the nation's first cannabis kitchen offering delicious infused foods, and a drive-thru for ultimate convenience. We're proud to offer a carefully curated menu of premium flower, concentrates, edibles, and more, designed to elevate the experience for seasoned consumers and newcomers alike. Named “Most Innovative Medical Cannabis Dispensary” by the International Commercial Cannabis Awards, Mint Cannabis continues to grow rapidly across Arizona, Michigan, Missouri, and beyond. Our team - from budtenders to leadership - is driven by passion, education, and a commitment to helping every guest feel welcome, informed, and supported. At Mint Cannabis, we're not just changing the cannabis industry - we're growing a community. Equal Opportunity Employer Statement Mint Cannabis is proud to be an Equal Opportunity Employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.