Quality control analyst jobs in New Braunfels, TX - 120 jobs

We are seeking an analytical chemist with general laboratory experience including creation of standards/spiking mixes, sample preparation, and sample analysis as well as familiarity with GC/MS, FTIR, percent moisture determination, LC-MS/MS, HPLC-UV, and/or Raman analytical platforms. The focus of this role will be on providing technical support to Signature Science's quality assurance (QA) contracts for defense and homeland security programs as well as commercial proficiency testing (PT) programs, including HazMat PT, hemp/cannabis PT, and custom PT programs. The successful candidate will also support internal Signature Science quality programs through maintenance of the quality management system and QA laboratory support. Essential Duties and Responsibilities: Assist with planning and implementation of chemical analysis proficiency tests for methods such as gas chromatograph mass spectrometry (GC/MS), Fourier transform infrared spectroscopy (FTIR), percent moisture determination, liquid chromatography with tandem mass spectrometry (LC-MS/MS), high performance liquid chromatography - ultraviolet (HPLC-UV), and Raman. Activities include developing proficiency test plans, performing laboratory pilot testing, preparing and verifying proficiency test samples, and packaging samples for shipment. Perform laboratory activities related to the preparation and verification of proficiency test samples, as detailed below: o Creation of standards/spiking mixes, o Sample creation, o Sample extraction/dilution, and sample analysis, using techniques such as GC/MS, FTIR, percent moisture determination, LC-MS/MS, HPLC-UV, and Raman. Maintain laboratory equipment and laboratory records. Perform laboratory inventories, purchase laboratory supplies, and maintain appropriate purchasing records. Evaluate special study and proficiency test data, identify data trends and other issues, and help prepare reports. Lead or assist with the validation and/or verification of new methods Contribute to the development and revision of internal and external quality documents based on ISO/IEC 17025, ISO/IEC 17043, ISO 17034, and Clinical Laboratory Improvement Program (CLIP) standards, as applicable. Perform internal audits of Signature Science systems and procedures against relevant internal or external standards such as ISO/IEC 17025, ISO/IEC 17043, and ISO 17034. Regularly communicate with internal laboratory staff to help resolve laboratory or other quality-related issues. Other activities may include: o Assisting client laboratories in preparing for external ISO/IEC 17025 accreditation audits and attend assessments as an advocate for the client laboratory o Communicating with external laboratory staff to help resolve QA, PT, or other quality-related issues o Providing feedback and help prepare auditee corrective actions packets for submission to the accreditation body or certification body o Providing ISO/IEC 17025 training or training on other quality topics to clients o May serve as a task leader on one or more projects Required Knowledge, Skills & Abilities: General chemistry laboratory experience (e.g., creation of standards/spiking mixes, sample extraction/dilution, and sample analysis). Knowledge of and/or experience with GC/MS, FTIR, percent moisture determination, LC-MS/MS, HPLC-UV, and/or Raman analytical platforms. General quality management experience, preferably in an analytical laboratory setting. Proficiency in MS Word, MS Excel, and MS PowerPoint. Strong written and verbal communication skills. Proactive, self-starter Preferred knowledge, skills, and abilities include: Laboratory experience with GC/MS, FTIR, percent moisture determination, LC-MS/MS, HPLC-UV, and/or Raman analytical platforms. Experience assessing data for trends. Analytical laboratory auditing experience. Knowledge and experience with relevant quality standards, including ISO/IEC 17025, ISO/IEC 17043, ISO 17034, and/or CLIP. Ability to lead small teams and ensure accurate and timely submission of project deliverables. Education/Experience: Bachelor degree (or higher) in chemistry, biochemistry, or related field. At least 3 years experience performing analytical chemistry laboratory work Certificates and Licenses: None upon hire Clearance: Candidate must be able to obtain a Secret level security clearance. Supervisory Responsibilities: May serve as a task leader on one or more projects Working Conditions/ Equipment: Ability to work in varying conditions to include: traditional office environments with sedentary extended periods required for voluminous data analysis via office automation; Climate controlled laboratory environments requiring extended periods of standing when performing laboratory analyses, or during audits and SOP observation; Mobile laboratories, subject to wide ranges of temperature and humidity requiring extended periods of standing, stooping or kneeling in confined spaces; conference, classrooms or theaters that involve extended periods of standing for training delivery or command briefings; and outdoors in various weather and lighting conditions including heat, humidity, cold, snow, bright sun, and dark night. Exposure to various chemical and biological materials associated with an analytical lab or facility. Ability to wear required personal protective equipment (PPE) including gloves, coats or gowns, shoe cover, tyvek coveralls, safety glasses, respirators, and/or PAPRs. Subject to medical monitoring based on lab functions. The above job description is not intended to be an all-inclusive list of duties and standards of the position. Incumbents will follow any other instructions, and perform any other related duties, as assigned by their supervisor. Powered by ExactHire:190938

TAK Broadband is a leading end-to-end U.S. fiber broadband network construction contractor operating in 42 states. It builds more than just networks; it connects communities to new valuable digital opportunities. TAK offers comprehensive service solutions, from construction to drops to fulfillment. TAK's ecosystem of partners allows it to successfully complete every project starting from the first point of conception. This includes engineering teams, distributors, and more than 100 qualified construction crews with extensive experience across all ISP types and markets; over 300 experienced bury drop crews; and more than 700 professional technicians. We are seeking a Quality Control Coordinator to join our team in San Antonio, TX. In this role you will be responsible for all aspects of quality control throughout all phases of assigned projects as well as develop and maintain the quality control plan for assigned projects. Why TAK? * Full Time * Paid Weekly * Compensation: $18 - $25 per hour, DOE * Company provided vehicle, laptop, & phone * Full Benefits Package (Medical, Dental & Vision) * Paid Time Off * 401(k) with Company Match! * 25K Company Paid Life Insurance * Independent Work & Team Collaboration * Career Development & Advancement Opportunities! The Role * Responsible for all aspects of quality control throughout all phases of assigned projects * Develop and maintain the quality control plan for assigned projects * Visit project sites routinely, performing inspections to ensure work is completed in compliance with contract requirements * Prepare and submit quality control reports * Communicate with internal and external leadership, escalating out of compliance work, safety, or quality control concerns * Conduct quality control meetings as needed * Other duties as assigned Requirements * 1-2 years of telecommunications construction quality control experience required (i.e. must have worked in a cable install/construction role for a cabling company, an electrician position where cabling projects were completed, ISP or OSP underground or aerial construction experience, etc.) * Ability to travel daily to job sites in the area and open to a variety of schedules; evenings and/or weekends as needed * Ability to develop an understanding of company quality control program, company standards, procedures, codes etc. * Ability to learn how to read and interpret construction drawings and blueprints * Ability to learn and understand OSHA safety requirements and NESC (National Electrical Safety Commission) safety guidelines * Ability to work in a fast-paced environment with multiple priorities * Ability to lift and carry 70lbs consistently * Ability to complete work outdoors, in tight spaces and elevated by bending, reaching, twisting, climbing, and working while standing up to 70% of the time * Ability to safely work and navigate various terrains, managing equipment, safety equipment and tools * Must provide a valid government-issued photo ID for verification; a driver's license is required if the role involves driving * Passing of all pre-employment requirements (MVR, Background Check, Drug Screen) The compensation and benefits information is accurate as of the date of this posting. The Company reserves the right to modify this information at any time, with or without notice, subject to applicable law. TAK is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetic information, protected veteran status, or any other characteristic protected by law. We maintain full compliance with the Americans with Disabilities Act and are committed to providing equal access throughout our employment practices. Individuals with disabilities may request reasonable accommodations during the application and hiring process by contacting *****************************. Salary Description $18 - $25 per hour, DOE

Since 1958, Anderson Columbia has been an industry leader in paving and road building, making smooth stomping grounds for vehicles of all kinds. We strive to construct roads from the highest quality materials and apply ourselves to ensure the job is done right. From small backstreets to congested highways, we perform jobs of all proportions and create pavement in a way that makes the ride enjoyable. We pride ourselves on being one of the Largest Construction & Aggregate Producing Contractors in Florida. Our sense of professionalism paired with our teams of highly-trained personnel allows us to be successful at every job we employ. Anderson Columbia doesn't just hire employees into a company, we hire people into our family; after all, people are our greatest asset. If you appreciate the feeling of sweat on your forehead, the sense of accomplishment at the end of a long day, or the pride in calloused hands, Anderson Columbia may have a place for you. Anderson Columbia of Texas New Braunfels quarry We currently produce 1 to 1.9 million tons per year of aggregates. Monday - Friday ( Some Saturdays ) Day Shift - 6:00am - 4:00pm Pay Rate - Starting at $19.75/Hour DOE* Work Environment Role operates in a manufacturing environment with moving mechanical equipment, inclement weather, heat, humidity, elevated noise levels, and dusty conditions. Job Description The Quality Control Technician is responsible for taking samples, observing and testing a variety of materials from all stages of the production process, using physical, and instrumental techniques. Evaluating the test results against internal and external specifications. The Quality Control Technician is also responsible for reporting noncompliance and taking action to preserve the integrity of our products. Sample and test raw materials for specification compliance. Validate that the proper components and materials are used. Calibrate, clean, and maintain production tools and testing equipment. Record test results and report them to management. Perform daily equipment inspections, as well as identify and assist in correcting unsafe conditions. Collaborate with plant employees and build and maintain relationships with customers. Build and maintain relationships with plant employees and customers. Accurately sample and perform physical properties tests on all types of raw materials, in-process, and finished products following established laboratory guidelines, SOP, or consensus standards. Effectively document, interpret and communicate analysis results within the context of the production facilities to maintain product quality. Assist with tasks in other departments as needed. Monitor test results of raw materials, in-process and finished goods for trends and adherence to specifications. Report noncompliance immediately to affected departments and take action to maintain compliance with specifications when necessary. Follow the required industrial hygiene, legislative and plant requirements. Familiar with the operation, safety features, and manuals of all laboratory instruments, machines, and tools. Maintain housekeeping of sampling locations. Responsible for minor repairs on laboratory equipment, facilities, and preventative maintenance. Ensure a workplace culture of safety through workplace inspection and watching out for others. Complete appropriate training to run equipment in the most efficient and sustainable manner. Maintain chemical solutions, laboratory instruments, standardization or calibration schedule, and a clean work environment. Essential Experience and Skills State DOT certification or the capability and drive to obtain quickly upon hire. Strong basic math skills Proven record of punctuality, excellent attendance, and dependability Good computer literacy - ability to learn computerized analysis equipment and proficiency with Microsoft Office Ability and willingness to work a flexible schedule including different shifts and overtime as needed. High School Diploma or GED Preferred Experience and Skills College degree or technical training/certifications Quality Control experience Stone quarry or related industry experience Job Qualifications: A qualified candidate must have: Have at least three years of Quality Control experience in a manufacturing or mining plant. Must have a high school diploma or GED. Must have steady employment. Must have clean and valid drivers' licenses. Must be able to work outside in severe weather conditions as well as exposure to high temperatures, noise, and dust. Excellent communication skills and problem-solving skills. Self-motivated and must be able to work independently with integrity. Ability to complete required paperwork and mathematical assignments in a scientific format and in the required time frame. Knowledge of basic computer skills. Demonstrated skills entering and retrieving data in a Microsoft based computer system. Must be a safe employee, excellent attendance, and outstanding quality of work. Must be able to work at heights of 75 feet, confined spaces, climbing ladders or stairs, and accessing tunnels. Must be able to pass background check. Must be able to pass pre-employment and random drug test while employed. Must pass pre-employment physical. Must be able to lift 75 pounds or more. Must be able to work rotating shift work if required. Rotating days of week and rotating between days and nights if required. Must be ability to read, write, and interpret documents such as safety rules, standard operating procedures, maintenance instructions, and procedural manuals. Must be able to perform basic mathematical computations. Must have a telephone and be open to call-outs. Able to work any day of the week. Valid and Clean Driver's license Ability to pass random drug test. Able to work either days or nights. Able to work 12-hour shifts. Able to pass all required certifications for test procedures required in a 4 to 6-month period after being hired. Benefit Packages available after 3 months. Healthcare, Dental, Eye, Life Insurance, paid holidays, vacation. 401 k after 6 months, with company match program. Equal Opportunity Employer Email address is required to submit resume. **You will receive a confirmation email once you submit your resume. ** DFW / EOE DisclaimerThe above statements are intended to describe the general nature and level of work being performed by people assigned to this classification. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed.

Who is Senior plc? Senior plc is an international, market-leading, engineering solutions provider with 30 operating businesses in 13 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors. Our global values underpin what we do, and how we do it … Safety - Integrity - Customer Focus - Respect & Trust - Accountability - Excellence Who is Senior Flexonics Pathway? Senior Flexonics Pathway is the leader in the engineering and manufacture of high-quality metal expansion joints, damper products and fabric expansion joints. We are dedicated to creating the highest quality products and developing unique design solutions that meet the complex challenges inherent in industrial processes. We offer the opportunity to be a part of our team crafting these critical, technically challenging parts that are installed in facilities all over the world. Job Description What does the job involve? The primary responsibility of this position is the inspection of products and processes in accordance with various codes, standards and specifications to assure compliance with quality requirements. What does the job involve? Assist with hydrostatic or pneumatic pressure proof tests (Interpretation of exam results not required.) and become familiar with set ups and safety requirements. Perform dimensional and workmanship inspections in receiving, in process and final inspection areas using dimensional measuring equipment. Assist in the calibration of dimensional and pressure measuring devices. Monitor the welding operations to assure that welding procedure specifications are followed. Monitor welder performance qualifications to assure that welders are properly qualified to perform the welding assigned. Perform, with supervision, PT NDE Examinations and attain NDE Level II status, through classroom and on the job training in accordance with company written practice SQP-601 and SNT-TC-1A. May be sent to radiation safety classes for RT NDE training. What will my responsibilities include? Assist the QC Inspectors, QC Lead, QC Specialist & DQA in the performance of their duties. Escort customer inspectors as they perform their inspections. Qualifications What key skills and experience do I need? Ability to inspect expansion joints and related products, with supervision. Ability to evaluate quality issues and determine solutions to assure on time shipments. Communication with Production, Engineering, and Customer Service to inform of any issues that might affect shipment or schedule. What qualifications should I have? High school diploma or equivalent with emphasis in mathematics skills. Good reasoning and communication skills. Prior inspection or nondestructive examination experience in a related industry. Successful qualification in accordance with Standard Quality Procedures SQP-601, SQP-602 or SQP-603. Additional Information Why join Senior Flexonics Pathway? Senior Flexonics Pathway's compensation package includes competitive wages, a comprehensive benefits package along with wellness benefits, an employee recognition program, matching 401k plan, paid vacation and tuition reimbursement. Trade Compliance Statement Access to our facility is restricted under the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. Equal Employment Opportunity Statement Senior Flexonics Pathway provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state of local laws. Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

Who is Senior plc? Senior plc is an international, market-leading, engineering solutions provider with 30 operating businesses in 13 countries. Senior designs, manufactures and markets high-technology components and systems for the principal original equipment producers in the worldwide aerospace, defense, and land vehicle and power & energy markets. The Group is split into two divisions, Aerospace and Flexonics, servicing five key sectors. Our global values underpin what we do, and how we do it … Safety - Integrity - Customer Focus - Respect & Trust - Accountability - Excellence Who is Senior Flexonics Pathway? Senior Flexonics Pathway is the leader in the engineering and manufacture of high-quality metal expansion joints, damper products and fabric expansion joints. We are dedicated to creating the highest quality products and developing unique design solutions that meet the complex challenges inherent in industrial processes. We offer the opportunity to be a part of our team crafting these critical, technically challenging parts that are installed in facilities all over the world. Job Description What does the job involve? The primary responsibility of this position is the inspection of products and processes in accordance with various codes, standards and specifications to assure compliance with quality requirements. What does the job involve? Assist with hydrostatic or pneumatic pressure proof tests (Interpretation of exam results not required.) and become familiar with set ups and safety requirements. Perform dimensional and workmanship inspections in receiving, in process and final inspection areas using dimensional measuring equipment. Assist in the calibration of dimensional and pressure measuring devices. Monitor the welding operations to assure that welding procedure specifications are followed. Monitor welder performance qualifications to assure that welders are properly qualified to perform the welding assigned. Perform, with supervision, PT NDE Examinations and attain NDE Level II status, through classroom and on the job training in accordance with company written practice SQP-601 and SNT-TC-1A. May be sent to radiation safety classes for RT NDE training. What will my responsibilities include? Assist the QC Inspectors, QC Lead, QC Specialist & DQA in the performance of their duties. Escort customer inspectors as they perform their inspections. Qualifications What key skills and experience do I need? Ability to inspect expansion joints and related products, with supervision. Ability to evaluate quality issues and determine solutions to assure on time shipments. Communication with Production, Engineering, and Customer Service to inform of any issues that might affect shipment or schedule. What qualifications should I have? High school diploma or equivalent with emphasis in mathematics skills. Good reasoning and communication skills. Prior inspection or nondestructive examination experience in a related industry. Successful qualification in accordance with Standard Quality Procedures SQP-601, SQP-602 or SQP-603. Additional Information Why join Senior Flexonics Pathway? Senior Flexonics Pathway's compensation package includes competitive wages, a comprehensive benefits package along with wellness benefits, an employee recognition program, matching 401k plan, paid vacation and tuition reimbursement. Trade Compliance Statement Access to our facility is restricted under the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. Equal Employment Opportunity Statement Senior Flexonics Pathway provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state of local laws. Trade Compliance Statement Access to our facilities is restricted under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR) to U.S. Persons (U.S. Citizens, lawful permanent residents, U.S. Nationals, U.S. refugees, asylees, or temporary residents under amnesty provisions ), and to properly licensed foreign persons. Applicants receiving a conditional offer of employment will be required to provide information to determine whether they are subject to these regulations and, if so, to assess their country of chargeability for export control purposes. Additionally, potential employee names will be screened against the Consolidated Screening List (maintained by the United States government) to determine eligibility to receive controlled technical data. To ensure there is no unexpected delay to your start date with our Company and due to the potential need to obtain an export license, we would like to promptly assess whether such a license is needed to access our facility and/or systems. Such licenses can take several weeks/months to obtain from the U.S. Government. Our Trade Compliance department may reach out to you with a Licensing Assessment form, which we request you kindly complete and return as soon as possible. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. EOE M/F/D/V/VEVRAA Federal Contractor

Lab Analyst I - Early Phase Clinical Research- ICON San Antonio- Full Time/Permanent ICON plc is a world-leading healthcare intelligence and clinical research organization. We're proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development. We are currently seeking a Lab Analyst I to join our diverse and dynamic team. As a Lab Analyst I at ICON, you will be responsible for conducting routine laboratory tests and analyses to support clinical research studies. You will play an essential role in maintaining accurate data, adhering to standard procedures, and contributing to the overall success of the laboratory operations. Title: Lab Analyst I Location: On-Site San Antonio TX USA Job Type: Full Time-Permanent Shift/Schedule: M-F 11 AM-7 PM What You Will Be Doing: * Performs and reports routine and special laboratory tests on clinical trial specimens to aid in subject safety and in accordance to protocol requirements, under general supervision. * Detect abnormalities as indicated in protocol. * Performs specimen processing and testing independently to include waived and moderate complexity testing. Analyzes test results and assumes accountability for accuracy. * Operates, maintains, and troubleshoots laboratory instrumentation and equipment and makes minor repairs as necessary and knows when to notify lab management. * Understands, performs, and practices quality control management to include running controls, evaluating data, documentation of data, and taking corrective action as required. Communicates any relevant QC information to Supervisor or Manager. * Must cross-train to other laboratory sections as needed. * Calculates, enters, and/or verifies results of laboratory procedures. * Utilizes the Laboratory Information System and eSource system. * Provides notification and documentation of critical laboratory values obtained to Principal Investigator. * Participates in the evaluation, development, and implementation of new or updated testing procedures and protocols. * Must complete all required compliance and regulatory tasks and follow all applicable policies and procedures. * Your Profile: * Associate or bachelor's degree in medical laboratory science. * MT/MLT/ASCP required (Clinical Lab Scientist license) * Minimum 2 years in a laboratory environment, preferably in a clinical pathology laboratory or related industry. * Proficient in laboratory techniques like coagulation and hematology testing * Good communication skills and the ability to work effectively in a team environment. What ICON can offer you: Our success depends on the quality of our people. That's why we've made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our benefits examples include: * Various annual leave entitlements * A range of health insurance offerings to suit you and your family's needs. * Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. * Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals who are there to support you and your family's well-being. * Life assurance * Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidized travel passes, health assessments, among others. Visit our careers site to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We're dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless - there's every chance you're exactly what we're looking for here at ICON whether it is for this or other roles. Are you a current ICON Employee? Please click here to apply

Lab Analyst I - Early Phase Clinical Research- ICON San Antonio- Full Time/Permanent ICON plc is a world-leading healthcare intelligence and clinical research organization. We're proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development. We are currently seeking a Lab Analyst I to join our diverse and dynamic team. As a Lab Analyst I at ICON, you will be responsible for conducting routine laboratory tests and analyses to support clinical research studies. You will play an essential role in maintaining accurate data, adhering to standard procedures, and contributing to the overall success of the laboratory operations. **Title** : Lab Analyst I **Location:** On-Site San Antonio TX USA **Job Type:** Full Time-Permanent **Shift/Schedule** : M-F 11 AM-7 PM **What You Will Be Doing:** + Performs and reports routine and special laboratory tests on clinical trial specimens to aid in subject safety and in accordance to protocol requirements, under general supervision. + Detect abnormalities as indicated in protocol. + Performs specimen processing and testing independently to include waived and moderate complexity testing. Analyzes test results and assumes accountability for accuracy. + Operates, maintains, and troubleshoots laboratory instrumentation and equipment and makes minor repairs as necessary and knows when to notify lab management. + Understands, performs, and practices quality control management to include running controls, evaluating data, documentation of data, and taking corrective action as required. Communicates any relevant QC information to Supervisor or Manager. + Must cross-train to other laboratory sections as needed. + Calculates, enters, and/or verifies results of laboratory procedures. + Utilizes the Laboratory Information System and eSource system. + Provides notification and documentation of critical laboratory values obtained to Principal Investigator. + Participates in the evaluation, development, and implementation of new or updated testing procedures and protocols. + Must complete all required compliance and regulatory tasks and follow all applicable policies and procedures. **Your Profile:** + Associate or bachelor's degree in medical laboratory science. + MT/MLT/ASCP required (Clinical Lab Scientist license) + Minimum 2 years in a laboratory environment, preferably in a clinical pathology laboratory or related industry. + Proficient in laboratory techniques like coagulation and hematology testing + Good communication skills and the ability to work effectively in a team environment. **What ICON can offer you:** Our success depends on the quality of our people. That's why we've made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our benefits examples include: + Various annual leave entitlements + A range of health insurance offerings to suit you and your family's needs. + Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. + Global Employee Assistance Programme, LifeWorks, offering 24-hour access to a global network of over 80,000 independent specialized professionals who are there to support you and your family's well-being. + Life assurance + Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidized travel passes, health assessments, among others. Visit our careers site (************************************* to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We're dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here (****************************************************** Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless - there's every chance you're exactly what we're looking for here at ICON whether it is for this or other roles. Are you a current ICON Employee? Please click here (****************************************************** to apply

Lab Analyst I - Early Phase Clinical Research- ICON San Antonio- Full Time/Permanent ICON plc is a world-leading healthcare intelligence and clinical research organization. We're proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development We are currently seeking a Lab Analyst I to join our diverse and dynamic team. As a Lab Analyst I at ICON, you will be responsible for conducting routine laboratory tests and analyses to support clinical research studies. You will play an essential role in maintaining accurate data, adhering to standard procedures, and contributing to the overall success of the laboratory operations. Title: Lab Analyst I Location: On-Site San Antonio TX USA Job Type: Full Time-Permanent Shift/Schedule: M-F 11 AM-7 PM What You Will Be Doing: Performs and reports routine and special laboratory tests on clinical trial specimens to aid in subject safety and in accordance to protocol requirements, under general supervision. Detect abnormalities as indicated in protocol. Performs specimen processing and testing independently to include waived and moderate complexity testing. Analyzes test results and assumes accountability for accuracy. Operates, maintains, and troubleshoots laboratory instrumentation and equipment and makes minor repairs as necessary and knows when to notify lab management. Understands, performs, and practices quality control management to include running controls, evaluating data, documentation of data, and taking corrective action as required. Communicates any relevant QC information to Supervisor or Manager. Must cross-train to other laboratory sections as needed. Calculates, enters, and/or verifies results of laboratory procedures. Utilizes the Laboratory Information System and eSource system. Provides notification and documentation of critical laboratory values obtained to Principal Investigator. Participates in the evaluation, development, and implementation of new or updated testing procedures and protocols. Must complete all required compliance and regulatory tasks and follow all applicable policies and procedures. Your Profile: Associate or bachelor's degree in medical laboratory science. MT/MLT/ASCP required (Clinical Lab Scientist license) Minimum 2 years in a laboratory environment, preferably in a clinical pathology laboratory or related industry. Proficient in laboratory techniques like coagulation and hematology testing Good communication skills and the ability to work effectively in a team environment. What ICON can offer you: Our success depends on the quality of our people. That's why we've made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our benefits examples include: Various annual leave entitlements A range of health insurance offerings to suit you and your family's needs. Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. Global Employee Assistance Programme, TELUS Health, offering 24-hour access to a global network of over 80,000 independent specialised professionals who are there to support you and your family's well-being. Life assurance Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidised travel passes, health assessments, among others. Visit our careers site to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We're dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here. Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless - there's every chance you're exactly what we're looking for here at ICON whether it is for this or other roles. Are you a current ICON Employee? Please click here to apply

Lab Analyst I - Early Phase Clinical Research- ICON San Antonio- Full Time/Permanent ICON plc is a world-leading healthcare intelligence and clinical research organization. We're proud to foster an inclusive environment driving innovation and excellence, and we welcome you to join us on our mission to shape the future of clinical development We are currently seeking a Lab Analyst I to join our diverse and dynamic team. As a Lab Analyst I at ICON, you will be responsible for conducting routine laboratory tests and analyses to support clinical research studies. You will play an essential role in maintaining accurate data, adhering to standard procedures, and contributing to the overall success of the laboratory operations. Title: Lab Analyst I Location: On-Site San Antonio TX USA Job Type: Full Time-Permanent Shift/Schedule: M-F 11 AM-7 PM What You Will Be Doing: Performs and reports routine and special laboratory tests on clinical trial specimens to aid in subject safety and in accordance to protocol requirements, under general supervision. Detect abnormalities as indicated in protocol. Performs specimen processing and testing independently to include waived and moderate complexity testing. Analyzes test results and assumes accountability for accuracy. Operates, maintains, and troubleshoots laboratory instrumentation and equipment and makes minor repairs as necessary and knows when to notify lab management. Understands, performs, and practices quality control management to include running controls, evaluating data, documentation of data, and taking corrective action as required. Communicates any relevant QC information to Supervisor or Manager. Must cross-train to other laboratory sections as needed. Calculates, enters, and/or verifies results of laboratory procedures. Utilizes the Laboratory Information System and eSource system. Provides notification and documentation of critical laboratory values obtained to Principal Investigator. Participates in the evaluation, development, and implementation of new or updated testing procedures and protocols. Must complete all required compliance and regulatory tasks and follow all applicable policies and procedures. Your Profile: Associate or bachelor's degree in medical laboratory science. MT/MLT/ASCP required (Clinical Lab Scientist license) Minimum 2 years in a laboratory environment, preferably in a clinical pathology laboratory or related industry. Proficient in laboratory techniques like coagulation and hematology testing Good communication skills and the ability to work effectively in a team environment. What ICON can offer you: Our success depends on the quality of our people. That's why we've made it a priority to build a diverse culture that rewards high performance and nurtures talent. In addition to your competitive salary, ICON offers a range of additional benefits. Our benefits are designed to be competitive within each country and are focused on well-being and work life balance opportunities for you and your family. Our benefits examples include: Various annual leave entitlements A range of health insurance offerings to suit you and your family's needs. Competitive retirement planning offerings to maximize savings and plan with confidence for the years ahead. Global Employee Assistance Programme, TELUS Health, offering 24-hour access to a global network of over 80,000 independent specialised professionals who are there to support you and your family's well-being. Life assurance Flexible country-specific optional benefits, including childcare vouchers, bike purchase schemes, discounted gym memberships, subsidised travel passes, health assessments, among others. Visit our careers site to read more about the benefits ICON offers. At ICON, inclusion & belonging are fundamental to our culture and values. We're dedicated to providing an inclusive and accessible environment for all candidates. ICON is committed to providing a workplace free of discrimination and harassment. All qualified applicants will receive equal consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application process, or in order to perform the essential functions of a position, please let us know or submit a request here. Interested in the role, but unsure if you meet all of the requirements? We would encourage you to apply regardless - there's every chance you're exactly what we're looking for here at ICON whether it is for this or other roles. Are you a current ICON Employee? Please click here to apply

Job Description Are you looking for an opportunity to work with the world's leading aviation maintenance and engineering specialist company? Aircraft you'll be working on E190, A300, Boeing 787, Boeing 757 - 3 lines, Boeing 747, MD11 - 2 lines, DC10 making sure all functions executed to the highest quality. Job Title: Aviation QC Inspector Job Location: San Antonio Job Type: Contractor Hire Date: Immediate Compensation: $28-$30/ hour (based on experience) Per diem: we offer the highest non-taxable per diem in the market (including on overtime) Hours: overtime is available Travel Bonus: offered if eligible (discussed at time of offer) Tools: toolbox and tools required ASR is aware of the importance of having the right professional on the job. We provide the best-qualified aviation technicians in the industry. ASR is a leader in supplying structure repair professionals due to the emphasis on internal management. This emphasis consists of evaluating the efficiency of our personnel with a focus on delivering a quality service, as well as meeting the deadlines. In addition, our mechanics are well trained with the newest and most modern structure techniques in the field. POSITION OVERVIEW Immediate positions are Quality Control Inspector in San Antonio, TX. You will physically inspect aircraft, aircraft components, and reviews paperwork to ensure that workmanship meets acceptable standards of quality and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. POSITION RESPONSIBILITIES Competent to perform thorough primary inspections. Competent to perform thorough receiving inspections. Thoroughly audits work packages, ensuring that all assigned work has been properly completed and documented. Thoroughly performs continuity inspections, ensuring that previously noted and subsequently repaired items have been properly completed and documented. Competently writes items, noting discrepancies. Able to competently research and retrieve technical data. Properly interprets blueprints, drawings and other technical data. Complies with all safety procedures at all times, without exception. Takes those prudent actions appropriate to the preservation of Company and/or customer assets, whether in monetary or other form. Attends work-related training as scheduled. Performs such other tasks as may be reasonably assigned by his/her supervisor. QUALIFICATIONS/EDUCATION High school diploma or equivalent. FAA Airframe and Powerplant Certificate. 1 of the following GenFams: MD-11, 747-400, 787, 777 5 years' experience exercising the privileges of his/her FAA A&P Certificate in the large transport aircraft maintenance domain. 20/25 near vision in at least one eye (corrected or uncorrected). An initial color vision test will be performed to establish the Inspector's ability to distinguish between the colors used to perform maintenance and inspection tasks Be able to read, write, speak, and understand the English language. Demonstrate familiarity with Federal Aviation Administration (FAA) Federal Aviation Regulations (FAR's) as detailed in the company RSM. Have completed at least two 40-hour Aircraft General Familiarization training on 2 large transport aircraft one of which must be on the following aircraft platforms: (Boeing MD-11, Boeing 757, Boeing 767, Boeing 737, Boeing 787, Embraer 170, Embraer 190, Airbus A319/320/321 family, Airbus A300). Willing and able to work both shifts (1st and 2nd) and at least 50 hours a week. Additional Keywords: Mechanic, Fitter, Mechanic, cabin mechanic, aircraft mechanic, avionics, sheet metal worker, engineer, A318, A319, A320, A321, DC-9, MD-80, MD-90, CAE, B1, NDT, sheet metal, B2, B1.3, B757, B717, B737, B757, B767, EMB 145, EMB 135, MD -11, jet2, management, captain, cabin crew, first officer, quality, ATR, airworthiness, safety, manager, composite, technician, avionic, aw139, aircraft technician, operations, aircraft fitter, B1 engineer, flight dispatcher, maintenance, Embraer, painter, aircraft engineer, instructor, logistics, camo, fitters, cabin mechanic, director, AP mechanic, airframe mechanic, QA, QC, inspector, OEM, MRO

Job Description ABOUT THE ROLE The quality control group monitors, supports, and influences the design, configurations, and actual construction necessary to guide our design and production teams to manufacture high quality industry leading homes and components for our customers in accordance with regulatory requirements. The quality control inspector undertakes the inspection of materials, components, and final products to confirm adherence to quality, regulatory, and engineering specifications. He/she works collaboratively with production departments to identify ways to continuously improve production quality. The quality control inspector may work independently or under direct supervision executing specific process steps under continuous quality review and coaching as needed. ESSENTIAL DUTIES & RESPONSIBILITIES Works in a safe manner following all safety policies while performing job duties. Undertakes to maintain a safe and healthy work environment for all employees by identifying any safety standards, procedures, or regulations that are not optimally addressed. Maintains open communication with supervisor regarding safety concerns. Follows work orders and instructions in order to accurately and efficiently review the preparation and assembly of building components based on production area specifications and regulatory requirements including HUD specifications. Inspects incoming materials, in-process production, and finished products to ensure materials and products meet specifications, regulatory requirements, and applicable drawings; conducts visual and measurement tests; documents and communicates rejections of unacceptable items and required corrections; ensures defective products are not delivered to the customer. Works collaboratively with production supervisors, team leads, and line assemblers to discuss inspection results and provides guidance as needed. Documents inspection results by completing inspection reports and checklists; communicates any violations of the quality process or adherence to job performance requirements to Production Supervisors and QC Manager. Maintains a good attendance record and proactively communicates and coordinates with supervisors regarding attendance. Keeps inspection and measurement equipment operating by following operating instructions and notifying management when repairs are necessary. Assists in maintaining and keeping tools, machinery, and work area clean and organized. Performs various other job duties as assigned and needed. MINIMUM QUALIFICATIONS Must be 18 years of age. This can be a physically demanding job requiring the ability to lift 40+ pounds, to grip, work over head, pull at chest height, bend, stand, walk, kneel, crawl, push, pull, reach, climb and carry various materials and equipment. High school diploma and substantial experience in and clear understanding of the requirements and expectations across multiple production areas in a fabrication / manufacturing environment expected. Must have experience reading and interpreting schematics and excellent problem-solving skills. Experience in quality control Inspection preferred including building code knowledge, ability to gain an understanding of construction manuals, standards, regulations, and specifications regarding the products. Bilingual Spanish preferred. Ability to build effective relationships with fellow employees and supervisors including when providing constructive feedback and inspection results. Excellent written and oral communication skills required. Ability to handle multiple projects while maintaining attention to detail. Ability to work in a team, to be trained, and take direction. Flexible to work in a fast paced, changing environment. Not afraid to get dirty and handle tools/equipment daily. Must be able to pass a pre-employment drug screen.

Temp LOD Staffing has openings for Quality Control / In Process Inspector FLSA: Non-Exempt Grade/Level: N/A Travel Required: None Work Schedule: Rotating Schedule Rate of Pay: $14.80 - $15.55 The In Process Inspector is responsible for ensuring that quality standards are met to support the production needs. This individual will bef working in a Plastics manufacturing/production facility. Essential Duties and Responsibilities Report any problem with the machine or mold to the molding technician or supervisor immediately Read and follow instructions on the Q.A.R. (Quality Assurance Requirements) for each start-up Performs visual and gauging inspection as noted on the Q.A.R Maintain control charts as noted on the Q.A.R Report any qualified related problems to the Molding Technician and Quality Auditor Separate runners from production, if needed Perform material handling as required for product Follow and support the Quality System Procedures and Work Instructions Follow company safety rules and policies and maintain a clean and orderly work area Perform miscellaneous duties as assigned by the Supervisor/ Molding Technician Other duties as assigned Minimum Qualifications High School Diploma/ GED Math aptitude Communication skills Computer literate (plus) Gage Training (desired) Preferred Qualification Gage Training Desired Working Environment The work can involve operating powerful machinery, which requires adherence to safety standards. Handling molten plastic or equipment at high temperatures can be physically challenging. Workers may need to wear protective gear like safety glasses, earplugs, steel-toed boots, and respirators. Potential hazards include exposure to chemicals, loud noises, and the risk of injuries from machinery. Shift work, including nights and weekends, is common because plants often operate on multiple shifts. Overtime may be required during peak production periods. Two rotating days off / 8am to 8pm or 8pm to 8am 12 hour shifts rotating days and nights with 36 and 48 work hours per/week. Physical and Mental Requirements Exerting up to 50 pounds of force occasionally, and up to 20 pounds of force frequently, and or up to 10 pounds of force constantly to move objects. Requires standing, lifting, kneeling, twisting, climbing stairs, and Ladders. Requires wearing personal protective safety equipment. Other Requirements Vision (near, distance) Sense of Sound (answering phone, fire alarms, horns) Company Description Labor On Demand, Inc. d.b.a. LOD Staffing is a knowledgeable and passionate employment agency servicing the Austin and San Antonio metropolitan area. For nearly two decades, we have strived to bring the right people together with the right jobs. Whether it is an opportunity for a new career, seasonal work, or a part-time gig to provide extra income, we take extraordinary pride in matching you with a position that satisfies your employment needs. Join our team today and let us help you find your next exciting career opportunity. We look forward to meeting you! EEO Statement Employees of Labor on Demand Inc. are protected by federal laws, Presidential Executive Orders, and other laws designed to protect employees from discrimination on the basis of race, religion, color, sex (including pregnancy and gender identity), sexual orientation, parental status, national origin, age, disability, family medical history or genetic information, political affiliation, military service, or any other non-merit-based factor. These protections extend to all management practices and decisions, including recruitment and hiring practices, appraisal systems, promotions, and training and career development programs. Employees of Labor on Demand Inc. are also protected against retaliation. Consistent with federal laws, acts of retaliation against an employee who engages in a protected activity whistle blowing, or the exercise of any appeal or grievance right provided by law will not be tolerated. Managers and supervisors of Labor on Demand Inc. are also reminded of their responsibility to prevent, document, and promptly correct harassing conduct in the workplace.

Please Note: To conform with the United States Government Space Technology Export Regulations, the applicant must be a U.S. citizen, lawful permanent resident of the U.S., conditional resident, asylee or refugee (protected individuals as defined by 8 U.S.C. 1324b(a)(3)), or eligible to obtain the required authorizations from the U.S. Department of State. At CesiumAstro, we are developers and pioneers of out-of-the-box communication systems for satellites, UAVs, launch vehicles, and other space and airborne platforms. We take pride in our dynamic and cross-functional work environment, which allows us to learn, develop, and engage across our organization. If you are looking for hands-on, interactive, and autonomous work, CesiumAstro is the place for you. We are actively seeking passionate, collaborative, energetic, and forward-thinking individuals to join our team. We are looking to add a dedicated and talented Quality Control Inspector to our team on second shift. In this position, you will work closely on an integrated team of Cesium managers, engineers, and other cross-functional personnel in the production of state-of-the-art satellite communication systems.JOB DUTIES AND RESPONSIBILITIES Executing Quality Control processes associated with purchased product, manufacturing operations, and customer quality requirements. Inspection of printed circuit boards / assemblies (PCB / PCBAs), verification of electrical, electronic, and electromechanical (EEE) components, and cable assemblies. Inspection using calipers, height gauges, thread gauges, and VMMs (Vision Measuring Machine). Documentation of inspection activities using electronic information systems, written logs, and labels. Assist in the development, maintenance, and improvements of inspection methods, inspection plans, and internal quality procedures and processes. Assist with the resolution to internal/external nonconformance using root cause, corrective action, and 8D methodologies. Assist in data analysis and reporting of department metrics as required. Assist with the continuous improvement initiatives. Assist in the resolution of audit findings, observations, and recommendations. Assist with the control and disposition of non-conforming material (MRB). Drive scheduling of day-to-day processes; ensure timely and accurate turnaround. Other QC duties as assigned. JOB REQUIREMENTS AND MINIMUM QUALIFICATIONS Associate degree in a technical field preferred. H.S. Diploma or equivalent required. Minimum of 5 years relevant work experience including a minimum of 2 years of experience in PCB/PCBA inspection required. Experience with AS9100 or ISO9001 Quality Management Systems. Experience with microscopic visual inspection. IPC-A-610 / J-STD-001 certification. Experience with ERP and PLM software systems. Proficiency with reading engineering documents, CAD drawings, and detailed work instructions. Strong digital, written, and verbal communication skills. Strong attention to detail and ability to follow procedures. Strong interpersonal skills and ability to work with others in a positive and collaborative manner. PREFERRED EXPERIENCE Experience in the aerospace or electronics industry. CesiumAstro considers several factors when extending an offer, including but not limited to, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. Full-time employment offers include company stock options and a generous benefits package including health, dental, vision, HSA, FSA, life, disability and retirement plans. CesiumAstro is an Equal Opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected Veteran Status, or any other characteristic protected by applicable federal, state, or local law. Please note: CesiumAstro does not accept unsolicited resumes from contract agencies or search firms. Any unsolicited resumes submitted to our website or to CesiumAstro team members will be considered property of CesiumAstro, and we will not be obligated to pay any referral fees. We may use artificial intelligence (AI) tools to support parts of the hiring process, such as reviewing applications, analyzing resumes, or assessing responses. These tools assist our recruitment team but do not replace human judgment. Final hiring decisions are ultimately made by humans. If you would like more information about how your data is processed, please contact us.

Full-time Description As a QC- Inspector, you will oversee the successful implementation of the Quality Control Program to ensure compliance with the project contract, conduct weekly quality control meetings with Engineers, provide reports as needed on the project, answer client questions, and be the go-to person for this project. About Terradyne Engineering At Terradyne Engineering we have been the experts in geotechnical and environmental engineering since 1995. We love giving back to our community, and here are some of the organizations we support: American Red Cross; Habitat for Humanity; Operation Finally Home, and this is to name a few. Here at Terradyne Engineering, we pay for any certifications needed that the team member needs to be successful in his/her career! You can increase your pay after 90 days of employment when you pass a needed certification! We invest in your career! Requirements Job Responsibilities Manage routine to moderately complex projects by providing all technical expertise required to meet/exceed client expectations Prepare proposals, project set-up, processes contracts, test data review, field report review, prepares project summary reports and prepares invoices Help train and review field technicians Hold face to face meetings with new and existing clients or contractors Perform and review various field and laboratory tests on soils, concrete and aggregate materials Prepare various levels of reporting responsibilities depending on the scope of services of a project Work with operations to coordinate field staff on projects as needed Assist with training as needed Work independently when on job site Work with project engineers and clients to ensure that client specifications are followed Provide solutions for onsite construction issues Job Skills & Requirements PE with one year of airport paving experience EIT with two years of airport paving experience Three years of highway and/or airport paving construction experience with a Bachelor of Science Degree in Civil Engineering, Civil Engineering Technology or Construction. NICET III certified in highway materials technician, highway construction technician, or construction materials technician. NICET II with three or more years of relevant experience (highway/transportation) required OR B.S. Civil Engineering with E.I.T. certificate considered Nuclear Density Gauge Certification preferred Possess other industry-related certifications Love and enjoy working indoors. Demonstrated leadership skills Computer aptitude and ability to adapt to the company's systems A valid driver's license and a clean driving history required Good written and verbal communication skills Ability to create positive and professional working relationships Excellent problem-solving High level of initiative Ability to follow instructions. Excellent time management skills. Always adhering to safety protocols and procedures. Must be a self-starter, reliable, and come with a good and humble attitude Attention to detail. Strong teamwork, communication, multitasking, and organizational skills. Basic computer skills such as Word and Excel. Clean MVR, background, and drug screening. Valid driver's license. Tasks assigned by the supervisor or manager Benefits Medical insurance (United Healthcare) Dental & Vision (Guardian) Aflac (Additional insurance) 401K Match (Principal) PTO accrual since (start accruing since your 1st workday) 7 Paid Holidays (It varies per job site/client needs) Opportunities for professional development, training, and growth. Competitive pay commensurate with experience. We're an equal-opportunity employer. All applicants will be considered for employment without attention to race, color, religion, sex, sexual orientation, gender identity, national origin, veteran or disability status. Terradyne Engineering Core Values Integrity| Loyalty | Commitment to excellence | Ambitious/Hardworking | Passionate | Humility

ST Engineering is a global technology, defense, and engineering group with a diverse portfolio of businesses across the aerospace, smart city, defense and public security segments. With our U.S. headquarters based in Alexandria, VA, we have major operations in over 50 cities across 23 states, employing about 7,000 people in the country. At ST Engineering, we enable a more secure and sustainable world through innovative technology, products and solutions across diverse market segments. For the latest news about the group, visit ************** and follow the ST Engineering LinkedIn page. JOB SUMMARY: Responsible for the initial inspection and surveillance of commercial-type aircraft undergoing maintenance and repair. ESSENTIAL RESPONSIBILITIES: 1. Comply with an initial inspection of commercial-type aircraft using customer provide work instructions. 2. Inspect and accept or reject all required inspection items and non-routine work accomplished on commercial-type aircraft. 3. Inspect aircraft and components utilizing special tooling and equipment. 4. Perform weight and balance functions on commercial-type aircraft and complete calculations. 5. Audit aircraft maintenance work packages. 6. Sign logbook airworthiness release. 7. Inspect and report findings on facility inspections. 8. Adhere to safe maintenance practices and keep the work area clean. 9. Maintain work performed on O.J.T. forms for the training department. 10. Successfully complete any training courses deemed necessary by supervision. 11. Perform any work that may be assigned by his or her lead or supervisor. JOB SPECIFICATIONS: Component Replacement, Hydraulic component replacement, Air conditioning component replacement, Pneumatic component replacement, Engine component replacement, Basic hydraulic systems (operations), Basic Flight Control Systems, Landing Gear Servicing, Basic Troubleshooting, Tire/Brake Change Procedures, Galley Installation, Engine Starter Removal/Install, Cargo Conversion, Cockpit Window/Windshield Replacement, Entry Door Slide Removal/Replacement, Brake Rider/Aircraft Towing, Power plant Removal/Replacement Assistant, Main fuel control adjustment, Engine Trim Procedures, Knowledge of all aircraft manuals & related materials, Knowledge of ATA codes; Knowledge of all applicable F.A.R.'s and company policies and procedures; Knowledge of all paperwork procedures including job cards/time cards, routine/non-routine cards, S.R.M.'s, service bulletins, and work sign-off procedures. WORKING ENVIRONMENT: SUPERVISION: Under General Direction. Normally performs duties after receiving general instructions as to methods, procedures, and desired results. INTERPERSONAL RELATIONS: A high level of interpersonal skills is required to maintain an effective relationship with co-workers and supervision. PHYSICAL ENVIRONMENT: Requires easy mobility around various sections of aircraft. Requires mental skills and quickness with the ability to cope with stress and intense effort fort or exertion usually caused by long working hours. The working environment requires standing 90% of the workday on hard surfaces. Must be able to lift 25 pounds and report to work regularly. JOB QUALIFICATIONS: EDUCATION: High Schools Diploma or GED required. FAA A&P Certification required. EXPERIENCE: Five (5) years minimum experience in heavy commercial and or military maintenance and/or six months skill level 3 mechanic. Recorded training on at least three (3) types of aircraft. Minimum two (2) years of inspection experience. GENERAL FAMILIARIZATION TRAINING (Preferred): MD-11, A320, B737NG, B747-400, B777, and/or B787. It takes diverse talent to solve real-world problems. ST Engineering is deeply committed to building a workplace community where inclusion is valued, and everyone feels welcomed. We're proud to consider all qualified applicants for employment without regard to race, color, religion, sex, pregnancy, family status, marital status, sexual orientation, national origin, disability, age, or veteran status, or any other legally protected grounds. So, bring us your personal experience, your perspectives, and your background. It's through our differences that innovative changes are made. ST Engineering is committed to providing reasonable accommodations to qualified individuals with disabilities in the employment application process. To request an accommodation, please contact our Talent Strategies team at ************, or by email at ***********************. Nearest Major Market: San Antonio Apply now "

Herzog Contracting Corp. is currently seeking a Quality Control Inspector in San Antonio, TX to join our team. Duties and Responsibilities: . * The candidate is responsible for controlling the quality of all construction works under the direction of the QC Manager. Dedicated full time to the construction project, with no other responsibilities other than quality related duties. Also responsible for the construction quality control documentation including reports, completed submittals and approved shop drawings in a controlled and secure documentation system. * Additionally, the candidate is expected to identify and implement quality management needs beyond ISO 9001:2015 on a project-specific basis as needed. * The candidate will be responsible for conducting daily inspections and surveillances of construction and testing activities and suppliers/manufacturers in accordance with contracts and specifications requirements. The candidate must provide examples of similar experiences and accomplishments and demonstrate effective communication skills.Regular and consistent engagement, participation and promotion of Herzog's Culture and its essential behaviors are a requirement for this position. * Regular and consistent engagement, participation and promotion of Herzog's Culture and its essential behaviors are a requirement for this position. * Regular and predictable attendance and punctuality are a requirement for this position. * Other duties as assigned. Qualifications: * Four-year college degree or equivalent field experience * 5 years of experience in heavy civil and/or track construction, in inspection is preferred. * Certified Construction Quality Control Manager (CQCM) with Corps of Engineers preferred. * Familiar with the Three-Phase Program of inspection. * Knowledge of company quality control program applicable to work. * Ability to determine acceptability and rejectability of work base on assigned criteria. * Previous quality control inspection experience. * Familiarity and knowledge of codes and standards applicable to specific construction activity is expected. QC inspection certifications from DOT, ASQ and other recognized training institutions are preferred * The candidate is also expected to be willing to travel and relocate to fulfill the position's requirements. * Ability to write detailed reports and demonstrated computer skills necessary to access, research, and document results in the electronic medium are expected. * Valid driver's license and favorable driving record. * Strong written and verbal communication skills. * Bilingual is a plus. Pre-Employment Requirements: * Subject to pre-employment background check and motor vehicle report review. * Maintain valid driver's license and endorsements as required per position. * Subject to pre-employment physical, medical evaluation, and drug screen due to the safety sensitive nature of this position. * Successfully complete and maintain any required safety certification and testing on an annual basis. Physical Requirements: The physical demands described below must be met by an employee to successfully perform the essential job functions of this role. This is a non-exhaustive overview of the physical requirements of this job. * Able to walk on uneven surfaces * Occasionally ascend/descend step ladders and/or stairs * Regularly sit and stand for an extended period of time. * Regularly kneel, bend, and squat * Must successfully pass color/vision examinations as required by the position. * Must be able to hear and distinguish auditory signals. * Able to work in conditions with loud noise; work on/around heavy/moving machinery. * Able to work outdoors in all weather conditions (hot, cold, rain, snow, and sleet). Safety: * Herzog is nationally recognized for its excellent corporate safety record which results from all employees at all levels, in all positions adhering to established policies and procedures. Reporting any and all safety violations to your immediate supervisor is a prerequisite for continued employment. Safety diligence by all results in a safe work environment for all. Benefits: * Herzog offers a robust benefits package including medical and dental coverage. The plans are specific to projects and locations. Why Herzog: Founded in 1969, Herzog is headquartered in St. Joseph, Missouri, with a satellite office in Fort Worth, Texas. Over the course of our 50+ year history, Herzog has become a national leader in the construction, operations and maintenance of commuter rail, light rail, streetcar, and freight rail projects. We believe our culture is at the heart of our existence. It is that belief which empowers every member of our professional family to act with purpose and passion as they advance their career throughout their personal pursuit of excellence. Backed by over five decades of experience, Herzog delivers exceptional customer service and elite results. Our success is the outcome of our relentless pursuit of excellence, our passion for our customers, safety without compromise, and a deep-rooted belief in the power of team. We invite you to join us on our journey to excellence as we work to be better today than yesterday and better tomorrow than today. It is the policy of Herzog Contracting Corp. to provide equal opportunity in employment for all qualified individuals regardless of race, color, religion, ethnicity, national origin, ancestry, disability, medical condition, age, citizenship, sex, sexual orientation, gender, gender identity, gender expression, marital status, pregnancy, genetic information, military status, veteran status, and any other characteristic protected by law.

Semiconductor Quality Control Inspector CAM Industrial Solutions, a leader in industrial services and one of the fastest-growing privately held companies in Canada and the United States, is seeking a high-impact Quality Control Inspector (CWI required) to join our dynamic team. At CAM, we believe “good” is never good enough. We aim for excellence in everything we do, and we're looking for individuals who share that same drive, take pride in their work, and thrive in a collaborative, high-performance environment. If you are passionate about continuous improvement, teamwork, and making a meaningful impact, we encourage you to apply and become part of our forward-thinking organization. Visit us at **************************************** Position Summary: The QC Inspector will ensure compliance with all quality standards on piping and welding activities for semiconductor tool installation. This role is critical in maintaining documentation, overseeing inspections, and ensuring all work meets project specifications, regulatory requirements, and CAM quality expectations. Key Responsibilities: Perform inspections and verifications on piping and welding activities in accordance with AWS/ASME codes and Samsung project requirements. Verify weld procedures, welder qualifications, and ensure weld traceability. Review and inspect materials, fit-ups, welds, and piping systems for compliance with project specifications. Conduct daily QC walkdowns, document findings, and support resolution of non-conformances. Maintain accurate inspection records, weld logs, and material certifications. Support pressure testing, flushing, and high-purity system verification. Ensure materials used in fabrication are per specifications and cleaned and stored as per semi standards. Collaborate with project managers, engineers, and subcontractors to resolve quality issues. Enforce cleanroom protocols, ESD handling, and contamination control standards. Qualifications: CWI (Certified Welding Inspector) - Required Minimum 3-5 years of QC experience in piping and welding, preferably within semiconductor, industrial, or high-tech construction. Strong knowledge of welding codes (AWS, ASME) and inspection techniques (VT, PT, MT, pressure testing). Ability to read and interpret P&IDs, isometrics, and technical drawings. Proficiency with quality documentation tools (e.g., Procore, Autodesk, or equivalent). Familiarity with cleanroom environments and contamination prevention practices. Strong communication and documentation skills with attention to detail. Working Conditions: Frequent exposure to active construction sites and variable weather conditions. Must be able to perform physical tasks including climbing, kneeling, crouching, lifting (up to 25 lbs), and walking for extended periods. Regular inspections may require work in confined spaces, elevated platforms, and controlled cleanroom environments. Willingness to work second/third shifts, weekends, or respond to emergency calls to meet critical project milestones. Use of cleanroom PPE (e.g., bunny suit, respirator) and chemical suits required for certain operations. Equal Employment Opportunity CAM Industrial Solutions is an equal opportunity employer, and we thrive on our differences for the benefit of our employees, our customers, and our community. It is our policy to provide equal opportunities in all decisions related to hiring, training, and promoting regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status or any legally protected characteristic or class.

Job Description we are looking to fill! As a chemical handling technician, you will be assigned a variety of tasks, including but not limited to transfer of materials onsite to maintain inventory in active lab and production facilities, transfer of waste materials in accordance with facility/site policies, maintenance and cleaning of chemical processing equipment, general facility maintenance, and responsibility for maintaining PPE inventory in all active facilities. Assignments will vary any given week, so expect that while you will certainly have core responsibilities to own, there will be a steady introduction of new tasks and responsibilities as your experience grows and the site capabilities increases. Strong communication skills are certainly required as you will interface directly with other technicians, engineers, chemists, production/operations and safety personnel. You will also assist with prepping the raw materials for use, assisting in the weigh-up for mixes, and conducting full mixes. Musts: · 2+ years of related experience working in chemical handling/process environments. · H.S. diploma · Demonstrated experience with common computer software such MS Outlook, Word and Excel · Willing and able to work with hazardous chemicals · Willing to conduct operations lasting 5+ hours on your feet · Willing to clean lab equipment · Willing to follow procedures and document results in web-based applications Good-to-Have · Hands-on mechanical aptitude · Experience operating and maintaining lab equipment · Familiar with basic fabrication techniques: machining, welding, etc. · Experience using CAD: models, drawings, BOM, etc. · OK with periodic repetitive tasks Location: Luling, TX Job Posted by ApplicantPro

**ESSENTIAL FUNCTIONS:** The essential functions include, but are not limited to, the following duties. Additional essential functions may be identified by the organization and listed as such in the incumbent's performance appraisal element. Various tasks may be assigned under each essential function. Those that are listed under the examples of work are not all inclusive; they are examples only and may be amended or added to as needed by the organization. + Monitoring, observing and Evaluating Maintenance in the COMBs and Safety Procedures + Ensuring Compliance with Procedures + Dealing with Coworkers/Clients/Public **JOB DUTIES:** Responsibilities may include, but are not limited to: + Monitoring and reporting on COMBS warehouse supply procedures. + Assisting warehouse-receiving clerks in performance of receiving inspections during peak loads. + Investigate and submit items for warranty claims when required. + Accomplishing forms and documentation **reviews as required.** + **Advises** management on revising inspection/receiving regulations, _as_ required, to meet contractual requirements. + Preparing discrepancy reports and recommending actions in regard to supplier/vendor material/parts found to **be damaged when received.** + Accomplishing the functions of the Site Safety and HAZMAT Program Monitor. + Review/Screen aircraft/engine documentation as applicable to T-6 COMBS for possible errors. + Accomplishing site training for new personnel and assisting with training records maintenance. + Monitor and maintain tool calibration and assist with GSB maintenance as needed. + Setting _up_ and maintaining the Technical Library. + Performing QEC installation inspections. + Cleaning of warehouse, shops, offices and restroom as required. + Clerical and other assigned duties as required. **QUALIFICATIONS:** + **Knowledge, Skills, and Abilities** (Required Skills include the ability to:) + Familiarity with FAR's relating to aircraft components, parts, hardware, equipment, and Airworthiness Standards (FAR Part 21, 23, and FAR Part 43). + Thorough knowledge of warehouse shipping and receiving procedures. + Ability to communicate effectively, both orally and in writing. + Ability to deal courteously with the customer. + Maintain proficiency in the use of the various types of inspection aids to be used for inspection of the particular items undergoing inspection. + **Education and Experience:** + Valid FAA Airframe and Powerplant Certificate. + Graduation from a standard four (4) year high school or equivalent (GED) **AND** a Minimum of **FIVE** years' recent experience in aircraft maintenance. + Documented proof of aircraft mechanic experience. **Benefits include the following:** + Healthcare coverage + Retirement Plan + Life insurance, AD&D, and disability benefits + Wellness programs + Paid time off, including holidays + Learning and Development resources + Employee assistance resources _Pay and benefits are subject to change at any time and may be modified at the discretion of the company, consistent with the terms of any applicable compensation or benefit plans._ Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.