Quality control analyst jobs in Rockford, IL

Hentzen is a unique company in today's world. Since our founding in 1923, we've remained an independent, privately held organization committed to being a leader in the development and manufacturing of high-performance coatings. Our success is built on a foundation of innovation, dedication, and service-to both our customers and our employees. With over 100 years of experience, Hentzen has earned recognition as a technology leader and trusted partner in the aerospace, defense, and industrial markets. Our ability to custom-engineer advanced coatings tailored to meet the specific and challenging requirements of our customers sets us apart. This innovation comes to life in our state-of-the-art facilities, where our talented employees are empowered to solve complex problems through creativity and collaboration. If you're looking to join a company known for its technical excellence, employee commitment, and customer focus, Hentzen offers a rewarding and challenging opportunity to learn, grow, and make a meaningful impact. DEVELOPMENT CHEMIST - LIQUID R&D 1st Shift M-F Batavia, IL Plant The Development Chemist - Liquid R&D is responsible for the formulation, research, and development of new products and colors as well as improvement of existing products. The successful candidates will have an acceptable score on the color matching and math tests. DESCRIPTION OF ESSENTIAL DUTIES: Develop new products for customers per their requirements. Develop products and solve technical issues with a relatively minor amount of direction. Exercise wide discretion when solving challenges. Provide technical assistance for existing accounts. Build knowledge of analytical methods for solving problems. Train production and quality control personnel. Work with production personnel to solve problems. Exhibit demonstrated decision-making abilities. Plan activities for support personnel. Reduce or rework distressed products on hand to reduce inventory. Ability to travel up to 10% of time. As part of the housekeeping procedures, the employee may be involved with the disposal of hazardous waste. The initial training of how to properly dispose of hazardous waste will be performed by the Environmental and Safety department or the department supervisor. Annual training of the same will be performed by the EHS department. Perform other miscellaneous duties as assigned. QUALIFICATION REQUIREMENTS: Education level strongly preferred: Bachelor's degree in chemistry or related field. Experience level preferred: One to three years in a manufacturing or industrial setting, preferably in coatings or chemical environment. Ability to receive and provide instructions in a positive manner. Ability to read, understand and apply complex mathematical calculations. Exemplify core values, i.e., Integrity, Loyalty, Passion, Commitment, and Respect. Must be a high energy, results driven individual with excellent communication, computer, and decision-making skills. Ability to work independently, in a fast-paced team environment, with the proactive problem-solving skills and work ethic necessary for timely completion of projects. Excellent computer skills (Microsoft Office - Word, Excel, Outlook), ERP system and other office machinery. WORK ENVIRONMENT: While performing the duties of this job, the employee is frequently required to talk and/or hear, stand, and/or walk, use hands to finger, handle or touch objects or controls, and move from place to place. The employee is regularly required to sit, balance, stoop, and occasionally reach above shoulders. The employee occasionally must use foot/feet to operate machinery, climb, or balance and reach above the shoulders. The employee may regularly lift and/or move up to 65 lbs. Personal Protection Equipment is required during various processes in the production facility. Safety shoes, glasses, respirators, fire retardant uniform, and earplugs may be required when performing certain functions. Please send your resume to: Hentzen Coatings, Inc. Attn: Human Resources 6937 W. Mill Road Milwaukee, WI 53218 or APPLY ONLINE AT: Hentzen Career Center Hentzen Coatings, Inc. is an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. *************** All candidates are subject to post-offer testing: including a job-related pre-employment physical, drug screen, and background check.

GENERAL DESCRIPTION The Quality Control Technician I is responsible for inspecting and testing our products to ensure conformance with PCI standards and design specifications that are detailed on the pour sheet. This position is critical to ensuring the quality and safety of our products. Starting wage for this role is $25.00 an hour WHY WORK FOR US? At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results. In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better. WHAT WE HAVE TO OFFER Wells values our employees and is committed to providing a competitive and comprehensive benefits package. Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative. Health, dental and vision insurance Paid premiums for short- and long-term disability, and life insurance Wellness Incentives Paid holidays Flex spending for medical and daycare Health savings account (HSA) 401(k) plan with profit sharing Access to Nice Healthcare Employee Assistance Program Paid Time Off (PTO) Wishbone Pet Insurance Critical Illness Benefit Plan Accident Insurance Plan Voluntary Hospital Indemnity Plan Other benefits include Health and Family Care leave for both union and non-union employees. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Performs pre-pour inspections including dimensions of member, position of reinforcement, location of tensioning strand, and quality of forming. Post-pour inspection of cast product Perform wet and hardened required testing on the materials used in the manufacturing of product. Prepares concrete specimens for testing. Regularly performs test for slump, temperature, unit weight, air content, and cylinder strength. Involved with tensioning of cable to record elongations and ensure cable is tensioned as designed. Perform cylinder strength tests to ensure they meet intended strength. Conduct aggregate gradations and sieve analysis. Compliance with safety policy and procedures. Maintains complete Quality Control documentation for inspections and testing performed. Identify and record quality issues and works with Production to resolve those issues. Acts in professional manner that demonstrates the individual has good character and can be trusted by all employees. Complete special projects as requested and performs other duties as assigned. Willingness to work outside all year long (Location Specific) EDUCATION, SKILLS, AND ABILITIES REQUIRED High School Diploma or GED. Must have interpersonal communication skills to interact with co-workers, supervisors, and managers. Experience with Microsoft Office. Must be able to solve problems quickly and efficiently. General math skills, be able to read a tape measure. Strong attention to detail and organizational skills. Knowledge of safety procedures that need to be followed. Ability to work with others to get the project completed efficiently. Must be motivated and self driven to complete a task. Understand and accepts changes that are implemented to become best in Class. PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS Physically able to lift up to 75 lbs, occasionally. Physically able to push, pull, lift, bend, climb, kneel, twist, squat, crawl and use hands/forearms repetitively and frequently. Ability to move around for up to 12 hours per day. Ability to work from ladders, scaffolding, swing stages and man lifts at various heights frequently. WORKING CONDITIONS Moderate to high risk of exposure to unusual elements. Moderate to high risk of safety precautions. Moderate to high exposure to production environment. Wet, hot, humid, and wintry conditions (weather related) (plant specific) Ability to work outside year-round (plant specific) This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be reasonably assigned by his/her supervisor. Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S. #INDLABOR

The Quality Control Chemist will support the production of a critical component in cancer treatment. The role involves setting up and performing daily assays for both the final API product and raw materials, drafting method validation documents, and executing and drafting final reports. The chemist will also perform validation and calibration on equipment, work with HPLC and Mass Spectrometry, and assist in installing a LIMS system. The position requires spending 60% of the time in the lab and 40% in the office analyzing and collecting data. Responsibilities * Set up and perform daily assays for final API product and raw materials. * Draft method validation documents and execute and draft final reports. * Perform validation and calibration on equipment. * Run HPLC and Mass Spectrometry. * Assist in the installation of a LIMS system. * Analyze and collect data in a laboratory and office setting. Additional Skills & Qualifications * Bachelor's degree in a scientific discipline such as analytical chemistry. * 0-2 years of experience in pharmaceuticals, medical devices, or radiopharmaceuticals. * Knowledge of HPLC and ICP-MS instrumentation. Work Environment The work environment consists of clinical and future commercialization clean room settings under GMP regulations. The role operates on a first shift, a rare opportunity in the biotech industry, providing a conducive environment for growth and promotions. Job Type & Location This is a Permanent position based out of Janesville, WI. Pay and Benefits The pay range for this position is $52000.00 - $72800.00/yr. Medical, dental, vision, 401K Workplace Type This is a fully onsite position in Janesville,WI. Application Deadline This position is anticipated to close on Dec 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Job Description Quality Control Inspector Elgin, IL Currently looking for a Quality Control Inspector to fill an opening with a metal stamping company in Elgin, IL. Interested candidates should have at least one year of quality control inspection experience in manufacturing. More than one year of experience will be strongly considered. Responsibilities of the Quality Control Inspector Be responsible to measure parts using GD&T if necessary and to use metrology such as Vernier calipers, micrometers and gages Be able to inspect parts per print including work-in-process and finished goods Review and follow quality control plans and participate in testing for parts including non-conforming parts for review by the MRB Material Review Board Be on the shop floor and in the lab to review materials, dimensions and other specifications to verify conformance to customer requirements Be trained for and be responsible for maintaining and cleaning the tools of metrology such as height gages, calipers, go/no go gages, optical comparators, CMM Coordinate Measuring Machines and other equipment Assist with the development of quality inspection plans such as for first piece, in-process and last piece inspections Be trained to if necessary and apply your knowledge to assist with the development of PFMEA's and Quality Control Plans Meticulously focus maintaining quality documentation Requirements of the Quality Control Inspector At least one year of quality inspection experience in manufacturing Bilingual Spanish speaking is a plus High School Diploma Compensation for the Quality Control Inspector The targeted annual base salary for this first shift position ranges from $23.00 to $33.00 per hour depending on experience and is temp to perm or contract to hire

Job Title: Quality Control Inspector Department: Quality Reports to: Quality Control Manager Classification: Non-Exempt Travel: None GWS is the North American leader in the design and manufacturing of custom cutting tools. Servicing industries including Aerospace, Automotive, Medical, Energy and general Engineering. As the fastest growing company in our industry, the career opportunities are numerous and the pathways for advancement nearly limitless. Entry-level position with limited prior training or relevant work experience. Has basic skills to perform routine tasks. Works within clearly defined standard operating procedures. Works with either close supervision or under clearly defined procedures. Job Summary: The Quality Control Inspector is responsible for ensuring that all products meet customer and company standards by inspecting end mills and form tools at the end of production. Responsibilities include inspection and test of product, process audits and disposition of non conforming product. Coordinating the use, calibration, and servicing of all inspection equipment. Duties/Responsibilities: Inspect cutting tools manufactured within extremely tight tolerances. Examine tools for proper geometry within blueprint specifications. Compare quantity and part number of items received with procurement data and other specifications to ensure completeness of and accuracy of order. Approve or reject items, and record inspection and disposition data. Inspect incoming raw material, thin film coating, vendor supplied tooling, grinding wheel geometric configurations and final inspections. Prepare inspection procedures for reference use in subsequent inspections. Run inspection programs for in-process process and final inspection. Assist in etching product identifications. Other duties as assigned. Education and Experience: High school diploma or general education degree (GED) or 1-3 years industry related experience and/or training. Certification from a qualified training institution in the field of tool and cutter grinding is ideal but not . Manufacturing experience is . Strong geometry knowledge is . Experience with hand gauges and non contact-contact inspection equipment is required. Required Skills/Abilities: Ability to convert metric to inch and decimal to fractions. Strong analytical troubleshooting ability. Uses standard operating procedures to guide own work and solve standard problems. Applies basic skills to perform simple activities. Understands how the assigned duties relate to others in the team and how the team integrates with others. Uses communication skills to exchange information. Use assigned methods, tools and processes. Support sharing of best practices. Familiarity with navigating Windows based computer programs. knowledge of the gauge calibration process. Ability to read and comprehend blueprints. Knowledge of calipers, hand micrometers, and metrology equipment. Ability to work in a fast paced manufacturing environment. Involvement And Knowledge of the use of quality management system procedures, forms, work instructions, and certifications. All qualified applicants will receive consideration for employment without discrimination on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, disability, age, genetic information, or any other factors prohibited by law.

Schafer Industries is a premier supplier of off-highway axles and differentiated precision gearing solutions. Established in 1934, Schafer Industries has locations in South Bend, IN, Roscoe, IL, Fredericktown, OH and Blacklick, OH. Schafer Industries is one of the few manufacturers of integrated axle solutions in the off-highway electric vehicle market. Schafer serves customers in a variety of end markets including off-highway vehicles, recreational vehicles, aerospace, defense, oil & gas, material handling, powertrain, electric mobility, heavy duty trucking, agriculture, and construction. Our mission is to leverage world class capabilities to deliver superior products and services to maximize the value for our customers, employees, shareholders, and communities. Position Summary: Schafer Industries is currently seeking a 1st Shift Quality Control Technician for its Schafer Gear Works operation in Roscoe, IL. Currently offering $1,000 sign on Bonus, Walk-In Interviews. Pay Range $20 - $28 per hour Why Work at Schafer Industries? We are a growth-oriented company with a diversified customer base. We are committed to a culture of safety and continuous improvement. You will enjoy a collaborative work environment where your talents and opinions matter. We provide training as well as opportunities to work on projects in support of your career development. You will quickly see your impact when working with the team. We have competitive pay and benefits to include 401(k) match and tuition reimbursement. We live our values of Safety, Integrity, Responsibility to Others, Customer Focus, Continuous Improvement and Accountability in all that we do. Schafer Gear Works offers a comprehensive, competitive total compensation program based on market trends. The company maintains training programs and tuition reimbursement to continually provide the opportunity for employees to enhance and improve their existing knowledge and skills. Benefits offered to employees and their families include: Medical, and Dental Plans Company Paid Vision Plan Company Paid Basic Life and AD&D Insurance Company Paid Short Term and Long-Term Disability 401(K) Savings Plan (Including company match) Job Related Training Tuition Reimbursement Optional Life Insurance Paid Holidays Paid Vacations Job Summary: 1. Supports the inspection function by: Perform in-process and finished goods inspections, including visual, dimensional and functional verifications. Maintain a record of inspection results with appropriate documentation completed based on the results. Maintaining control of non-conforming products and completed appropriate documentation on the non-conformance. Identifying status of all material in the lab area with the appropriate ID tag/flag. Coordinating the movement of material in and out of the lab. Inspecting material brought to lab for set-up verification or in-process performance. Inspecting prototype work as designated by the Q.A. Manager/designee. Assists with maintaining the calibration of equipment used in the lab by verifying and investigating out of tolerance situations. Repairing and maintaining, checking in/out Gages as needed. Maintaining calibration results for all test and inspection equipment. Reading and interpreting lead and involute charts off of any gear checking equipment. Completing other duties as assigned by Supervisor, Department Lead or QA Manager/designee. Conducts Receiving Inspection by: Inspecting material received from suppliers and customers per inspection plan. Completing and maintaining receiving inspection records as required, including material certifications. Ensure proper labeling of acceptable material. Performs all receiving tasks related to incoming materials including entry of received material into the MRP system and receiving/inspection file maintenance. Initiating Defective Material Reports as required. 3. Supports Process Control by: Assisting the development and implementation of QMS. Identifying process improvements that will increase capability and performance. Creating and maintaining company documentation such as manuals and procedures. Participating in the troubleshooting of test products. Assisting other areas to develop appropriate procedures and processes. Participating in team activities and supporting the success of the team goals. Knowledge, Skills, Abilities High school diploma or general education degree (GED) and two plus years of Quality technician experience in the metal working industry. Knowledge of Gear Metrology and Nomenclature is preferred. Ability to read and interpret prints, schematics, and procedures for the inspection of outgoing materials from SGW. Ability to accurately and effectively collect and interpret accumulated data from various inspections devices. Capable of maintaining and organizing accurate files relating to all facets of the lab. Strong computer skills. Familiar with Microsoft Office products. ASQ-CQI or ASQ-CQT certification is preferred Measurement Tools - able to select, setup and use the following types of gauges and inspection equipment, and evaluate the measurement results to determine conformance to specifications: Hand Tools (Calipers, Micrometers, all types) Gages (Pins, Thread, plug, Indicators) Optical Tools (Comparator, Profiles) Coordinate Measurement Machine Hardness testing equipment Surface plate methods and equipment Sunnen ID gages Vari-roll/M&M fixtures CMM Test and Dial indicators Computerized gear Checkers Marposs Air Gages Working Conditions: Air conditioned/heated manufacturing facility with possible exposure to noise; dust; fumes; physical, chemical, and biohazards; solvents, oils, and detergents. This job is to be performed at the designated facility 100% of the time unless directed otherwise by manager/supervisor. Work authorization: United States (Required) Schafer Industries is an EEO/AAP Employer: Our company is committed to providing equal employment opportunity. This means that we make employment decisions on the basis of job-related qualifications, skills and abilities and not on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, or any other basis protected by law. As a federal subcontractor, we also are required to take affirmative action, or proactive measures, to prevent discrimination. #IND1

Job DescriptionQuality Control Technician: Monticello, Wisconsin Our customer in Monticello, Wisconsin is seeking motivated individuals to join their team. We're hiring Quality Control Technicians to work full-time on 1st shift. As a Quality Control Technician, you will be responsible for supporting plant-wide quality practices, ensuring products meet specifications, and helping maintain adherence to internal procedures and protocols. Responsibilities of the Quality Control Technician: Observe and report production work practices and adherence to proper GMPs. Inspect in-process and finished products for quality and compliance with specifications. Log and report quality concerns and holds as needed. Review incoming COAs for compliance. Perform product testing such as residual O2 checks. Manage and retain samples and complete pre-shipment reviews when necessary. Perform equipment calibrations and assist with maintaining product attribute records. Help prepare samples for external laboratory testing. Assist with departmental training and additional audits or inspections. Support tasks, projects, and environmental checks as needed. Quality Control Technician Requirements and Qualifications: Ability to prioritize tasks and manage time effectively. Strong attention to detail. Ability to follow complex instructions. Ability to work effectively with minimal supervision. Basic computer and email skills. GED or equivalent. No prior experience required; on-the-job training provided. Ability to work in temperatures ranging from 33°ree;-65°ree;F. Pay for Quality Control Technician: $16.00-$19.50 per hour, with weekly bonus opportunities up to $2.00/hour. Quality Control Technician Benefits Health insurance. 401k with company match. Paid weekly. Direct deposit. Paid training. Type: 1st Shift, Full-time. Schedule: Monday - Thursday from 6:00am-4:30pm, with overtime on Fridays as needed.Apply now!Are you ready to move from the worries of today to your dreams of tomorrow? If so, give Hughes a call. We are the top-rated staffing, recruiting, and HR experts in the region. We are headquartered in Freeport, IL and have 11 locations across Illinois, Wisconsin, and Minnesota. Where we have offices, we have connections to the best local jobs! Walk in our doors and you'll find friendly professional staff who dig deep, get results, and most importantly have fun! The reviews speak for themselves, at Hughes we quickly hook you up with companies that offer competitive pay rates, great culture & benefits, and a chance to elevate your life. We offer health insurance and 401(k) too to all our employees. To get the ball rolling, visit us online at www.hughesrecruiting.com and complete our application. We'll be in touch soon!#HRCSJ

About Us WHY ProDriven Global Brands? BECAUSE WE ARE THE PRO'S CHOICE! You will find our market leading products and brands on trucks and job sites all over the world. Focusing on end users' needs drives our success. Our entire product development process-from research to engineering to manufacturing to commercialization-creates products that ensure ease of use, productivity, durability and safety for the end user. On jobsites across America and the world, ProDriven Global brands are most preferred. Overview The Senior Lab Technician is responsible for supporting and coordinating the daily technical activities of the R&D laboratory. This role provides advanced technical expertise in testing, prototype builds, and equipment operation, while also serving as a mentor and resource for other lab technicians. The Senior Lab Technician ensures that lab projects are executed safely, accurately, and on schedule, while maintaining a high level of organization, efficiency, and quality. Acting as the lead hands-on technician, this role helps maintain smooth daily operations and supports the Lab Manager by ensuring tasks are carried out consistently with company standards and project requirements. Responsibilities Key Responsibilities (Essential Job Functions): Lab Operations & Testing (60%) Perform and oversee daily lab activities, including testing, builds, and prototype assembly. Ensure all testing is conducted safely, accurately, and according to documented procedures. Troubleshoot technical issues with equipment, fixtures, or test setups. Maintain organized, clean, and safe lab workspaces. Technical Expertise & Support (25%) Serve as the go-to technical resource for lab personnel. Provide guidance and mentorship to junior technicians on proper testing and build practices. Assist with equipment setup, calibration, and routine maintenance. Recommend improvements to test methods, workflows, or equipment usage. Maintain thorough knowledge of ProDriven test standards and procedures Documentation & Coordination (15%) Accurately record test data, build notes, and daily lab activity logs. Assist with preparation of test reports, when required. Communicate status of lab work and escalate issues to the Lab Manager. Help coordinate scheduling of tasks, equipment, and shared resources. Qualifications Preferred Experience & Education Associate's or Bachelor's degree in a technical field, or equivalent hands-on experience. 5+ years of experience in a laboratory, prototype, or testing environment. Strong technical and mechanical aptitude; experience with test equipment and prototype builds. Prior experience mentoring or training other technicians is a plus. Key Competencies: Competencies needed to function fully within the position: Strong hands-on technical skills and problem-solving ability. Ability to mentor and guide peers in lab practices. Solid communication and organizational skills. Focus on accuracy, safety, and efficiency in daily work. Special Physical Requirements (if required): Ability to stand for extended periods of time. Ability to lift up to 50 lbs as needed for builds and setups. Salary Range: $55,000 - $76,000 The pay range listed is for Illinois based roles. It is not typical for a candidate to be hired at or near the top of the pay range. Specific compensation offered to a candidate may be influenced by a variety of factors including skill sets, qualifications, experience, education, certifications, training, and location. Benefits: 401(k) company match Medical insurance Dental insurance Vision insurance Life and disability insurance Paid time off

What you will do: The Quality Analyst reports to the Quality Manager under general supervision, and is responsible for analyzing warranty batteries, determining failure modes and communicating through RBR paper work to customer service. How you will do it: Unload RBR Warranty Pallet Trailers, Teardown and Analysis of Warranty Batteries and (HRF) High Rate Failures then wrapping them and loading to a Core Trailer to be sent to the Smelter. Inspection of internal components and record the reason for failure, the condition of each component and the type of component. Analyze components according to established quality control procedures. Inspect battery exterior for any physical condition, customer and manufacturer identification, deciphers date codes and records information. Determine serviceable condition of battery without teardown using a load tester or charge acceptance test with cadmium probe readings. Teardown and Analysis of Scrap Batteries and update the tracking system. Analyze Claim batteries and put the report together to customer service. Involve in process engineering and production supervision as necessary to identify and correct the cause and to eliminate or minimize future occurrences. What we look for: Required High school diploma Minimum of 2 years of experience working in a manufacturing facility. Microsoft Office Excel proficient. Preferred Associate degree in Quality, Engineering or similar disciplines is a plus. Forklift Driving experience (sit-downs, stand-up). Able to lift up to 40 lbs. without help from another operator or lifting device What we do here: Geneva, Illinois is home to a fully integrated plant that manufactures batteries used in the automotive and marine industries. As a fully integrated plant, we also decorate our batteries into the final product for our customers. We have been in Geneva since 1960, and today we are one of the largest employers in town with 265 people. We operate six days per week. We are actively involved in our local community and give back through The Salvation Army. #LI-SG1 What you get: Medical, dental and vision care coverage and a 401(k) savings plan with company matching - all starting on date of hire Tuition reimbursement, perks, and discounts Parental and caregiver leave programs All the usual benefits such as paid time off, flexible spending, short-and long-term disability, basic life insurance, business travel insurance, Employee Assistance Program, and domestic partner benefits Global market strength and worldwide market share leadership HQ location earns LEED certification for sustainability plus a full-service cafeteria and workout facility Clarios has been recognized as one of 2025's Most Ethical Companies by Ethisphere. This prestigious recognition marks the third consecutive year Clarios has received this distinction. Who we are: Clarios is the force behind the world's most recognizable car battery brands, powering vehicles from leading automakers like Ford, General Motors, Toyota, Honda, and Nissan. With 18,000 employees worldwide, we develop, manufacture, and distribute energy storage solutions while recovering, recycling, and reusing up to 99% of battery materials-setting the standard for sustainability in our industry. At Clarios, we're not just making batteries; we're shaping the future of sustainable transportation. Join our mission to innovate, push boundaries, and make a real impact. Discover your potential at Clarios-where your power meets endless possibilities. Veterans/Military Spouses: We value the leadership, adaptability, and technical expertise developed through military service. At Clarios, those capabilities thrive in an environment built on grit, ingenuity, and passion-where you can grow your career while helping to power progress worldwide. All qualified applicants will be considered without regard to protected characteristics. We recognize that people come with a wealth of experience and talent beyond just the technical requirements of a job. If your experience is close to what you see listed here, please apply. Diversity of experience and skills combined with passion is key to challenging the status quo. Therefore, we encourage people from all backgrounds to apply to our positions. Please let us know if you require accommodations during the interview process by emailing Special.Accommodations@Clarios.com. We are an Equal Opportunity Employer and value diversity in our teams in terms of work experience, area of expertise, gender, ethnicity, and all other characteristics protected by laws in the countries where we operate. For more information on our commitment to sustainability, diversity, and equal opportunity, please read our latest report. We want you to know your rights because EEO is the law. A Note to Job Applicants: please be aware of scams being perpetrated through the Internet and social media platforms. Clarios will never require a job applicant to pay money as part of the application or hiring process. To all recruitment agencies: Clarios does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to our careers email addresses, Clarios employees or any other company location. Clarios is not responsible for any fees related to unsolicited resumes/CVs.

Cleaver Brooks is looking for an R&D Technician to join our team in Monroe, WI. The Technician is responsible for evaluating, testing, and troubleshooting new and existing boilers and burners. Any salary estimation specified in this job board may or may not be aligned with our organization's pay philosophy. Apply to connect with a Talent Acquisition Partner who can provide you more details! Job Location: Monroe, WI Signing Bonus Details ( if applicable) : Qualified Technician candidates with 1-5 years of relevant boiler experience will receive a $2500 signing bonus! ($1500 paid upon hire, and $1000 paid after 90 days) Qualified Technician with +5 years of relevant boiler experience will receive a $5000 signing bonus! ($3000 paid upon hire, $2000 paid after 90 days) Essential functions: Focus on boiler controls and electrical functions Installs equipment to be tested or evaluated. Perform burner and combustion testing Collects data from testing (combustion/burner, pressure, temperature and emissions). Creates or modifies parts to resolve problems with fabrication, assembly, or performance. Maintains facilities and equipment. Troubleshoot mechanical, electrical and performance issues. Basic Requirements: Education: High School diploma or equivalent, 2 year degree preferred Experience: 2 - 5 years. Education may count as work experience Preferred Skills: Organizational abilities for data record keeping Reading comprehension Understanding of engineering concepts Strong understanding of electrical/controls Physical Skill & Effort: Work requires skilled, accurate, rapid, and closely coordinated manual skill. Work requires mostly moderate physical exertion. Working Conditions and Hazards: Normal hazards associated with working in a metal fabricating environment. Personal protection equipment required consists of: safety glasses, steel toed shoes and hearing protection. Additional personal protection equipment may be required and is dependent upon the work being performed, and may include: face shield, respirator etc. Benefits of Being a Cleaver-Brooks Employee: Competitive salary Comprehensive benefits, including medical, dental, vision, maternity support program, discounted virtual physician visits, voluntary medical benefits (Critical Illness, Hospital Care, and Accidental Injury), FSA, HSA, life insurance, short term and long-term disability Cash matching 401(k) plan Employee assistance program (EAP) Pet insurance Employee discount program Tuition assistance Paid time off and 11 paid holidays Who is Cleaver-Brooks: Cleaver-Brooks is the market leader in providing fully integrated boiler and burner systems. We lead the boiler/burner industry due to our unmatched distribution network's ability to deliver the knowledge, service, training, and support that are essential to long-term performance. Our customers will tell you that we are the only equipment provider that manufactures boilers, burners, controls, and a full array of ancillary and aftermarket products. They will also mention that our unique single-source capability means that we can deliver fully integrated boiler room solutions that reduce overall costs and optimize space. It is our focus on products that deliver the most efficient, reliable, safe, and environmentally sustainable solutions that differentiate us in the marketplace. Cleaver-Brooks continues a 90+ year legacy of providing the customers we serve with extraordinary products designed to deliver unsurpassed performance through the power of commitment. This description indicates the general nature of the tasks and responsibilities required of positions given this classification. It is not intended as a complete list of specific duties and responsibilities. Nor is it intended to limit or modify the right of management to assign, direct, and control the specific duties of individuals performing this function. The Company reserves the right to change, modify, amend, add to or delete from any section of this document as it deems, in its judgement, to be proper.

Job DescriptionDescription: Are you looking to drive your income? Come join our quality team that offers a NEW Pay for Performance program! By learning and efficiently performing the duties listed in each level below, you can receive increases to your pay. We have openings for a Quality Control Technician to join our team. The Quality Control Technician is a vital position at Freshpack. The motivated, qualified candidate will help keep the plant and its products 'in control' by insuring adherence to our internal procedures and protocols. Freshpack is a custom cheese packaging company that develops and innovates cheese products and packaging. Our products can be found in all 50 states and in most major retailers. Over the past 25 years, our team has grown from 15 to 290+ employees. It is an exciting time to join our team, as we are poised for substantial growth over the next 3-5 years. Duties/Responsibilities Bronze Level Observe and report Work practices of production and other employees Proper GMP's are being followed Inspect in-process and finished products for quality and compliance to specifications Perform other tasks and projects on an as needed basis Silver Level (includes Bronze Level duties) Adhere to the guidelines in the label compliance policy Log and report quality holds to the rest of the organization Review incoming COA's for compliance to specifications Perform product testing on residual O2 Manage retain products Complete pre-shipment reviews as needed Gold Level (includes Bronze and Silver Level duties) Perform equipment calibrations Maintain product attributes library Perform security and storage verifications Sample prep for external laboratories Assist with training within the department Platinum Level (includes Bronze, Silver, and Gold Level duties) Assist with environmental swabbing Compose, analyze, and provide customers with COA's Perform a series of additional audits and inspections Assist with ensuring product specifications are current and accurate Requirements: Required Skills/Abilities Ability to prioritize and manage time Demonstrates attention to detail Ability to follow complex instructions Ability to be highly effective with minimal supervision Basic computer and email composing skills Education and Experience GED or equivalent Experience is not required. On the job training is provided. Physical Requirements Ability to work in temperatures ranging from 33°ree;-65°ree;F Shifts Days: 6:00am - 4:30pm Mon - Thu (some overtime required on Fridays) Benefits Medical, dental, vision, company-provided life insurance & more! Referral program 401(k) program Pay for Performance program Get paid every Friday!

We're hiring Quality Control Technicians to support a food manufacturing company in St Charles. If you're detail-oriented, experienced in food safety, and ready to grow with a reliable team, this is your opportunity. Responsibilities: Monitor and support food safety and quality programs. Identify and correct issues in production or packaging. Ensure accuracy and compliance during all processes. Create quality status reports and monthly summaries. Maintain company and client QC policies and documentation. Complete other tasks as needed to improve product quality. ? Work weekends (off days during the week). ? QC, English, and Hierology tests required, plus interview at 26th St. office. Requirements: Experience in food manufacturing or quality control. Basic knowledge of food safety standards (GMPs, HACCP, etc.). Detail-oriented, with good communication skills. Able to work weekends and adapt to rotating schedules. English required (spoken and written). ? Ready to grow your QC career? Apply today!

We are seeking an experienced, detail-oriented Quality Control Chemist to add to our 2nd-shift team. The ideal candidate has a strong background in chemistry and thrives in a fast-paced and team-oriented laboratory environment. QC Chemist Hours: Approximately 2p - 1a, Monday - Thursday, some occasional work outside of normal schedule may be required. Reports to: Quality Manager Summary: The QC Chemist will support the manufacturing process by performing laboratory analysis of raw materials, intermediate blends, and finished goods. The QC Chemist will have strong complex instrumentation knowledge and support calibration and maintenance of lab instruments, as well as assisting in the transfer of customer test methods as necessary. Responsibilities: · Follow standard operating procedures and quality directives as outline by the IKI Quality Manual. · Perform raw material, intermediate blend, and finished product testing to ensure quality on all manufactured goods. · Prioritize workload and schedule testing to align with production and distribution plans. · Support the transfer of customer test methods, as needed. · Assist in the development and review of standard operating procedures for laboratory equipment, instruments, and processes. · Complete the required preventative maintenance on lab instruments and equipment, as necessary. · Document all test results in written and electronic format where appropriate. · Assist in the training of other lab personnel on laboratory instruments and new test methods. · Perform other duties as assigned. Required Skills & Abilities: · Attention to detail and thoroughness. · Ability to thrive in a fast-paced environment. · Maintain clean and organized workspace. · Effective prioritization and self-motivation skills. · Ability to read, interpret, and correlate data. · Excellent math skills and familiarity with MS Office suite, especially Excel. · Ability to communicate effectively cross-functionally. Education & Experience: · B.S. in chemistry, or similar discipline, required. · Minimum of 3 years of lab experience required. · Experience with HPLC, GC, pH, UV-vis, FTIR, Karl Fisher, and other wet chemistry techniques required. · Experience with HPLC, GC, and general analytical test method development and transfer highly preferred. · Experience with microbial testing and/or procedures is highly preferred. · Experience with contract manufacturing and testing preferred. Work Environment: Laboratory environment with exposure to chemicals. Proper PPE must be worn, and safety precautions must be followed. Physical Demands: Stands 75%, sits 25%, occasional lifting up to 50 lbs.

Responsibilities Check specification paper for accuracy. Ensuring lot number, use by date, batch code and number, and weights are correct. Set-up printer, weight checker machine and x-ray machine. Perform x-ray and weight check test every hour. Prepare and transfer information of the product into computer. At the beginning of the run, take fist two packages off the line to perform test. Check product's weight. Measure temperature, salt, volume, drain weight, and noodle weight (if required). Check seal integrity using plier and measure the width of the seal area. Perform Conductivity test After line finish, correct the data from computer by printing it out, ensure to save all the information. Test x-ray and weight checker at the end of the production. At the beginning of the day, check and ensure all scale in facility works properly. Check temperature of all incubators, freezers, cooler. Ensure the temperature is in the acceptable range. Perform evaluation on products from previous day production. By check at appearance, smell, tasting. Collect and send samples for laboratory test and customers as required Perform acid test for seal integrity. Ensure quality of product based on position responsibilities All other duties as assigned Qualifications Accurate completion of paperwork. Effective math skills. Basic computer skills. Interpersonal and team skills for working with employees at all levels within the company. Ability to lift on a continuing basis. Ability to operate a pallet jack. Ability to work in a safe manner in a production environment with safety hazards. Ability to tolerate fluctuating temperatures in a loud noise production environment. Physical Demands of the Position: While performing the duties of this position, the employee must be able to see, speak, hear, read, walk, and stand, walk, reach with hands and arms. for long periods. The employee must be able to pull, push, climb, stoop, kneel, crouch, crawl, balance, and lift in excess of 50 lbs. There is extensive walking required. 1st

Job DescriptionQuality Control Technician - 1st ShiftWe have a DIRECT HIRE opportunity for an experienced Quality Control Technician at a Monticello, WI cheese packing facility. This is a 1st shift position. The Qualify Control Technician plays a vital role in ensuring adherence to procedures and protocols.Hours: 6am to 4:30pm +OT Mon-Thurs (Friday hours as needed) Pay: $16.00-$18.00/hour (plus bonus pay opportunity) Benefits: Medical, Dental, Vision, Life Insurance, Short Term Disability, Flex Spending, 401(k), Vacation Quality Control Technician Responsibilities: Confirm proper GMPs are being followed; observe work practices Inspect in-process and finished products Adhere to guidelines in label compliance policy Log and report quality information Perform product testing Complete pre-shipment reviews as needed Perform equipment calibrations Perform security and storage verifications Assist with training Compose, analyze and provide customers with COAs Quality Control Technician Requirements: Ability to prioritize and manage time Attention to detail Ability to follow complex instructions Work well with minimal supervision Basic computer and email composing skills Some previous quality control experience required Please apply here, or if already registered with FurstStaffing, contact Janis at 608-745-7100. #FSSTDAR

Our client operates within the solar energy industry, and their products are manufactured in a state-of-the-art automatic production facility using sophisticated machinery. These products are assembled with high-precision, fully automatic equipment. Position Summary: The Quality Control Coordinator is responsible for ensuring the adherence to established standard operating procedures by inspecting frames produced in an aluminum or metal products manufacturing environment. They assist in the development and implementation of quality control policies, perform verification and calibration of measuring devices, and maintain documentation of all productions. The technician communicates with production line workers, schedules and reports audits to management, and participates in investigations and corrective actions for nonconformities. Key Requirements: High school and/or college diploma in a technical discipline or equivalent combination of education and experience Minimum of 2 years of related experience in quality control, ideally in an aluminum or metal products manufacturing environment. Knowledge of QA manuals and practices regarding manufacturing, certification, marking and stamping requirements applicable to products Knowledge of relevant codes and standards (ISO 9001, etc.) Superior organization and time management skills. Proficient spoken and written English. Demonstrated Competencies: Positive influential leadership ability to lead and manage a team to achieve production objectives for the plant. Proficiency in Microsoft Office and quality management systems. Excellent communication, interpersonal, and public speaking skills. Excellent decision-making and problem-solving skills. Strong organizational skills. Key Responsibilities: Inspect the produced frames in accordance with established standard operating procedures. Support the development and implementation of quality control policies and procedures required for internal standards. Perform verification and calibration of measuring devices. Investigate outcomes and recommend changes if needed. Maintain a documentation of all productions at the plant and on site. Maintain communication with the production line workers to ensure accuracy. Communicate audit schedules and report audit results to management. Participate in investigations and complete root cause analyses and implement corrective actions in case of nonconformities. Salary Base range: $45,000.00 - $55,000.00 Our client is an equal opportunity employer that is committed to diversity and inclusion in the workplace. They prohibit discrimination and harassment of any kind based on race, color, sex, religion, sexual orientation, national origin, disability, or any other protected characteristic as outlined by federal, state, or local laws.

Ace Machine & Tool, Inc. does what it takes to deliver accurately machined products with reliable service and innovative designs that solve problems. We provide affordable engineering and collaboration services for close tolerance, low volume prototypes and production of 1-10,000 parts. Job Description Position Summary - Mon-Fri 7AM-3:30PM, Cortland, IL (50 miles West of Chicago, near DeKalb, IL). Must be reliable and on-time for work, valid Illinois driver's license, clean driving record and background check. Quality Assurance Technician - Job Responsibilities: Assures consistent quality of manufactured parts though reliable inspection and measuring; validate processes while providing documentation for ISO management. Includes running small production parts on Haas CNC Machine with light buffing/grinding, balanced with other duties. Also includes material inventory/ordering and deliveries in company vehicle to pick up/drop off materials and parts. Achieves Quality Assurance objectives by contributing information and analysis of machinist materials (incoming) and production (outgoing); implementing production, productivity, quality, and customer-service standards. Identifying and resolving problems; completing customer reports in ERP software; determining system improvements; implementing change when needed. Develops quality assurance plans by conducting hazard analyses; identifying critical control points and preventive measures; monitoring verification procedures and inventories. Validates quality processes by establishing product specifications and quality attributes; measuring production; documenting evidence; determining operational and performance qualification; writing and updating quality assurance procedures. Maintains and improves quality by completing product, company, system, compliance, and surveillance audits; investigating customer complaints. Updates job knowledge by studying trends in and developments in quality management; participating in educational opportunities; reading professional publications; maintaining personal networks; participating in professional organizations. Enhances department and organization reputation by accepting ownership for accomplishing new and different requests; exploring opportunities to add value to job accomplishments. Qualifications Process Improvement, Measuring/Inspection of manufactured parts, Production Machining, Analyzing Blueprints, Metal identification, Inventory, Verbal Communication, Informing Others, Quality Engineering, Attention to Detail, Thoroughness, Dealing with Complexity. Additional Information High School Diploma/GED required. 1-3 years previous Inspection experience preferred. Should have a general working knowledge of computers, Microsoft Office, printers, scanner, telephone, texting and photocopier. Must be able to safely lift materials and parts up to 50 pounds. ********************************* for direct contact or call ************, thank you!

Primary Duties and Responsibilities: Perform testing and measurement of products to ensure compliance with Orchid Monroe, LLC and customer requirements. Conduct in-house calibration of instruments, maintain calibration schedules, and accurately document results in the calibration system and on instruments. Inspect and test incoming raw materials and components, including dimensional, chemical, and soft-magnetic properties. Perform internal product audits and ensure audit findings are addressed appropriately. Operate and maintain specialized testing equipment such as fluoroscopy machines, Epstein testers, and humidity chambers. Conduct customer-specific testing (e.g., phosphate thickness via XRF) in accordance with customer specifications. Properly document, contain, and control all non-conforming products, ensuring timely resolution. Maintain quality documentation and records in compliance with ISO/IATF requirements. Support PPAP submissions, engineering changes, and the validation of gauges and Control Plans/QRRs. Provide quality support to manufacturing operations, assisting in root cause analysis, problem-solving, and corrective/preventive actions. Participate in continuous improvement activities to enhance processes, reduce waste, and improve product reliability. Ensure the laboratory environment and equipment meet operational and cleanliness standards. Analyze and interpret test data, including statistical calculations (cpk, ppk, standard deviations, trends, etc.), and communicate results in clear, concise reports or presentations. Enforce compliance with safety regulations and promote a culture of workplace safety. Execute quality checks per Control Plans/QRRs and document objective evidence. Stop production if processes produce nonconforming product or waste. Validate gauges, initiate recalls when calibration issues are found, and ensure corrective actions. Control and quarantine nonconforming product, escalating to supervision and Quality Assurance as necessary. Maintain current knowledge of quality documentation, requesting updates or revisions when appropriate. Perform other related duties as assigned by supervision. Qualifications: Education & Experience: Associate's Degree in Quality, Engineering Technology, or related field; or equivalent work experience. Minimum of five (5) years of quality assurance experience in a manufacturing environment, preferably in metrology. ASQ Certified Quality Technician (CQT) strongly preferred. Technical Skills: Proficient in operating manual and DCC/CMM systems and vision measuring systems. Strong ability to interpret engineering drawings, with emphasis on GD&T and 3D datum structures. Advanced data analysis skills using Microsoft Excel or equivalent tools (e.g., cpk, ppk, SPC analysis). Solid math skills applicable to measurement, SPC, GD&T, and MSA. Knowledge of ISO 9001:2015 and IATF 16949:2016 standards. Communication Skills: Ability to read, write, and interpret technical content in English. Strong verbal and written communication skills for cross-functional collaboration. Other Requirements: Physical ability to work safely in a manufacturing and lab environment (standing, kneeling, lifting product, vision acuity for inspection, etc.). Work distribution: Lab (40%), Manufacturing Floor (20%), Desk/Computer (40%). Diversity & Inclusion Statement UPG Electrical is an equal opportunity employer committed to a diverse and inclusive workforce.

The Quality Control Chemist will support the production of a critical component in cancer treatment. The role involves setting up and performing daily assays for both the final API product and raw materials, drafting method validation documents, and executing and drafting final reports. The chemist will also perform validation and calibration on equipment, work with HPLC and Mass Spectrometry, and assist in installing a LIMS system. The position requires spending 60% of the time in the lab and 40% in the office analyzing and collecting data. Responsibilities + Set up and perform daily assays for final API product and raw materials. + Draft method validation documents and execute and draft final reports. + Perform validation and calibration on equipment. + Run HPLC and Mass Spectrometry. + Assist in the installation of a LIMS system. + Analyze and collect data in a laboratory and office setting. Additional Skills & Qualifications + Bachelor's degree in a scientific discipline such as analytical chemistry. + 0-2 years of experience in pharmaceuticals, medical devices, or radiopharmaceuticals. + Knowledge of HPLC and ICP-MS instrumentation. Work Environment The work environment consists of clinical and future commercialization clean room settings under GMP regulations. The role operates on a first shift, a rare opportunity in the biotech industry, providing a conducive environment for growth and promotions. Job Type & Location This is a Permanent position based out of Janesville, WI. Pay and Benefits The pay range for this position is $52000.00 - $72800.00/yr. Medical, dental, vision, 401K Workplace Type This is a fully onsite position in Janesville,WI. Application Deadline This position is anticipated to close on Dec 24, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.