Quality control inspector jobs in Hamburg, NY - 83 jobs

Job DescriptionDescription: With 55 years of experience, ATL is a full-service engineering support firm operating from 11 offices throughout New York State. Our commitment to employee satisfaction and client service results in a culture of opportunity and inclusion. We're growing and looking for Certified Welding Inspectors (CWI) to join our team! As a Certified Welding Inspector, you will have the opportunity for professional growth and advancement with competitive pay. Certified Welding Inspector (CWI) Perks & Benefits: Competitive Pay Competitive Health Insurance Paid training and certification with cash bonuses for successful completion Advancement career and opportunity planning Company vehicle for travel to project sites Paid Vacations/Sick/Personal/Holidays Safety training and equipment provided 401(k) Retirement Savings Plan with company match Certified Welding Inspector (CWI) Qualifications: Strong written and verbal communication skills Must be able to lift a minimum of 50 pounds, work from aerial lifts, ladders, scaffolding, and at high elevations. Proficient in Microsoft Office Ability to work with AWS & AISC codes One or more of the following certifications is required: ICC Structural Steel and Bolting Special Inspector, ICC Structural Welding Special Inspector, AWS CWI, AWS CAWI, SSPC, AMPP or ASNT NDT Certified Welding Inspector (CWI) Responsibilities: Structural inspection, including welding and bolting operations at fabrication facilities and active construction sites throughout New York State. Perform special inspections in accordance with the applicable building code requirements. Review project plans and specifications. Review and perform welding procedure and performance qualification testing. Routinely and effectively communicate with colleagues, contractors, and clients. ATL is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to age, race, color, religion, national origin, sex, sexual orientation, gender identity, genetic characteristics, disability, military status, protected veteran status, and any other basis protected by applicable local, state, or federal law or Executive Orders. Requirements:

Parallel Employment group in partnership with a customer in Lancaster has an exciting opening for a Quality Control Technician. In this role, you will verify product conformance in a fast paced environment with a large range of products. Additionally you will be receiving First Piece, In-process, Last Piece, Final and First Article Inspections. First and second Shift available Pay Rate: $22-$27 and hour Responsibilities: Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. Perform customer specific required Inspections and complete Inspection reports per the stated requirements. Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. Make requests to suppliers for missing or incorrect documentation. Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. Interact with other departments in a professional manner in addressing product quality and service issues. Provide other departments with information and assistance to support them in accomplishing their objectives. Contribute to and participate in improvement activities within the department and the company. Follow departmental procedures and work instructions as written and recommend improvements as necessary. Perform any other task/activity assigned by the supervisor within the scope of Company business. Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements Requirements High school diploma or equivalent required. Associate degree is preferred. 1 year of experience in inspection required. Communication - Advanced professional written and oral communication skills, including presentation skills. Safety Awareness - Ability to identify and correct conditions that affect employee safety. Quality Management - Provides high quality services, processes, programs and products while consistently seeking ways to improve outcomes and enhance service. Customer Oriented - Ability to take care of the customers' needs while following company procedures. Honesty / Integrity - Ability to be truthful and be seen as credible in the workplace. Teamwork -Working as a productive member of a cohesive group toward a common goal and contributing to team development and effective team dynamics.

Medical, dental, and vision benefits-effective on date of hire Generous paid time off benefits and 10 paid Holidays 3 weeks plus 2 days of PTO Paid lunch time Company-paid life insurance 401k plan with company match WELL-BEING Low-cost nutrition and mental health visits Up to $150-off your gym membership annually Discounted Pet Insurances for your furry friends Access to individualized financial planning meetings Employee Discount Program with savings on electronics, home goods, gym equipment, and more Discounted family caregiving support CAREER GROWTH Tuition Reimbursement On-site Training Programs Defined Career Path for advancement in role and compensation New Hire On-boarding Training Plans Our top-notch work environment includes: Climate Controlled in the summer months Clean & Comfortable Setting Schedule hours: 1st shift Mon.-Fri. 7am-3pm We offer market competitive compensation. Potential salary range for this role is $19.00-26.00 Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law. Position scope/summary Perform first piece, in process and final inspection or test on a wide variety of parts and document results. Indicate inspection status; maintain product traceability and non-conforming material control. Participate in internal audits, statistical process control and assist control of process documentation, records and equipment calibration. Essential duties and responsibilities Perform required inspections, measurements and testing of incoming parts, production first piece, in-process and finished product per established criteria Record results on appropriate documentation. Communicate any discrepancies to the person(s) responsible for corrective/preventive action activity Perform various dimensional inspections using specific dies, gages, microscopes, micrometers and other dimensional inspection system Indicate inspection status of parts with assigned labels and stamps Maintain product identification and traceability Control non-conforming product in accordance with documented procedures and verify timely corrective and preventative action Protect product during handling and storage in the performance of work Monitor factory environmental conditions, record data and identify adverse conditions Assist with distribution and control of process documentation and quality records Assist with control of measuring and test equipment calibration Participate in internal quality audits to verify compliance with documented procedures and specifications, record results and verify audit corrective action Assist with statistical methods of verifying and controlling process capability Provide leadership to production personnel on quality issues Comply with and reinforce the requirements of the Quality Manual and Standard Operating Procedures, ISO 13485, FDA Quality System Regulations and other customer standards Follow Occupational Safety and Health regulations, including laser safety practices. Performs job duties with little or no supervision or assistance Environmental working conditions Employee must comply with all safety policies and safe work procedures established by the company. Job tasks may also involve: Using personal protective equipment such as safety glasses, goggles, gloves, and other equipment as established in company policies and safe work procedures Working near cutting & machining fluids, solvents, lubricants and other hazardous chemicals using appropriate safety controls\ Lifting up to 50 pounds Frequent carrying, bending, standing, sitting, and repetitive motion Qualifications Minimum 2 years' experience as an inspector or 4 years manufacturing experience as a machine operator in a manufacturing or production environment. Prior medical device, aerospace, automotive or regulated Manufacturing environment preferred Certificate(s) of training related to this field of work (medical device industry or quality assurance) preferred Prior experience interpreting technical drawings & specifications required Proficient in the use of measuring and test equipment Demonstrate ability to check dimensions, surface relationships, finish material defects and mechanical strength of product following appropriate training Prior experience in the use of PC's and Microsoft Office software applications required It is impossible to list every requirement for, or responsibility of, any position. Similarly, we cannot identify all the skills a position may require since job responsibilities and the Company's needs may change over time. Therefore, the above job description is not comprehensive or exhaustive. The Company reserves the right to adjust, add to, or eliminate any aspect of the above description. The Company also retains the right to require all employees to undertake additional or different job responsibilities when necessary to meet business needs.

At Winland Foods, quality isn't just part of the process-it's who we are. Guided by our values of Excellence, Quality, Integrity, Respect, and Collaboration, our Food Quality Team Members ensure that every product we make is safe, consistent, and worthy of the trust our consumers place in us. As a Food Quality Team Member, you will be on the front line of protecting our standards and reputation. From performing critical inspections to supporting continuous improvement initiatives, you'll play a hands-on role in making sure every product reflects our commitment to excellence. You'll collaborate closely with production and sanitation teams, using your attention to detail and integrity to ensure compliance with food safety regulations and Winland's high expectations. This role is more than checking boxes-it's about leading with care, protecting consumer well-being, and ensuring every bite of our food delivers on Winland's promise of quality and consistency. **Employee Type:** Full time **Location:** NY Medina **Job Type:** Production Group **Job Posting Title:** Advanced Quality Team Member **Job Description:** **Schedule:** Monday-Friday, occasional weekends, 1st shift hours. **Work Location:** 4001 Salt Works Road Medina, NY 14103 **Salary, based on experience and other qualifications:** **$25.00 per** hour **Benefits:** Medical, Dental, Vision, 401(k) with match, STD/LTD/AD&D/Life, HSA, FSA, EAP, Hospital indemnity, Accident Insurance, Identity and Fraud Protection Plan, Legal, and Critical Illness. **Duties and Responsibilities:** This list of duties and responsibilities is not all inclusive and may be expanded to include other duties and responsibilities as management may deem necessary from time to time. **Safe Equipment Operation & Maintenance:** + Perform daily inspections, environmental swabbing, and product inspections. + Verify compliance with established standards + Perform daily inspections, preventive maintenance on Quality equipment. + Conduct internal audits. **Produc** **t Handling, Quality Control & Inventory Management** **:** + Conduct and oversee tasks like sensory testing, label verification, and analytical testing to ensure product attributes are correct. + Understand and follow plant policies for placing materials on hold and collecting retention samples. + Assist with inventory control for approved suppliers following FIFO practices. + Help with customer sample requests and microbiological testing for shipping requirements. + Communicate quality results to other teams within the plant. + Advise production teams in re-alignment when product is out of specifications. + Manage programs related to traceability and warehouse systems. + Provide back-up support in the department lead's absence. **Food Safety & Sanitation Compliance** **:** + Lead facility inspections and assist with a variety of quality checks and audits. + Follow GMP, HACCP, SQF, FSMA, and company food safety policies. + Maintain cleanliness and sanitation. + Participate in internal auditing. + Assist in leading internal audits. + Lead FSQ compliance in assigned area. + Act as a subject matter expert and mentor for team on food safety and enforce sanitation accountability. **Team Collaboration, Leadership & Training** **:** + Collaborate with cross-functional teams to resolve quality issues and investigate customer complaints + Assist team members, adapt to operational changes, and contribute to productivity, safety, and quality goals. + Provide backup coverage for multiple roles, share knowledge with peers, and support training. + Assist with SOP development and training. + Facilitate cross-departmental collaboration. + Coordinate team activities, assign tasks, lead shift meetings, and train others in advanced operations. **Documentation, Communication & Continuous Improvement** **:** + Manage specialized quality programs and documentation, using technical skills in systems like SAP and other quality management software. + Prepare accurate written documentation. + Record inventory transactions, shipments, and quality results in SAP. + Ensure precision in recording and reporting test results. + Support plant trials, process improvements, and cost savings projects. + Participate in 5S efforts. + Assist in reviewing quality paperwork and document control programs. + Work with supervisors and team to develop solutions to issues. + Act as 5S champion for area. + Lead improvement projects, perform operator-based maintenance, and analyze variance causes. **Knowledge, Training and Experience:** **Education & Experience** **:** + High School Diploma or GED required.Degree in Biology, Chemistry or Food Science are preferred. + Minimum 1 year of work experience in manufacturing or food production. + 18+ years of age. **Technical & Mechanical Skills** **:** + Ability to operate, troubleshoot, and advise on minor adjustments to formulas or processes. + Mechanical aptitude with the ability to identify and resolve quality irregularities. + Proficiency in SAP, hand scanners, and basic math skills. + Advanced levels require proficiency in MII, WE systems, and interpreting line huddle measures to resolve issues. + Computer literacy in Microsoft Word, Excel, PowerPoint, and Outlook. **Safety & Compliance** **:** + Knowledge of GMPs, SQF, HACCP, FSMA, and other food safety regulations. + Commitment to following all company safety policies and procedures. + Ability to lift up to 50 lbs., push heavy loads, stand/walk up to 90% of shift, and climb as needed. + Must have near and far visual acuity, some color perception, and full range of hand/arm movement. **Teamwork, Communication & Leadership** **:** + Communicate effectively in English, both verbally and in writing. + Work independently and collaboratively in a team environment, with a proactive, team-oriented mindset. + Provide training, guidance, and feedback to team members (progressively more responsibility at higher levels). + Advanced levels lead projects, identify skill gaps, and support multiple initiatives with minimal supervision. **Personal Attributes & Work Ethic** **:** + Positive attitude, dependable, self-motivated, and willing to work overtime or weekends as needed. + Strong problem-solving skills, attention to detail, and ability to multitask in a fast-paced environment. + Demonstrated accountability for work quality, attendance, and continuous improvement. **Physical Demands:** + Employees must be able to stand and walk for extended periods of time. Tasks may involve frequent climbing, pulling, pushing, carrying, grasping, reaching, twisting, turning, and stooping. + Ability to lift up to 50 lbsfrequently. + Must have good hand-eye coordination, motor skills, and 20/20 corrected vision. + Must have normal hearing and vision (with correction if needed), including the ability to distinguish colors for color-coded containers in production areas. + Employees must wear all required PPE according to the specific manufacturing environment, as outlined in the Employee Handbook, posted policies, or as directed by leadership. + Must adhere to all safety policies, including lock-out/tag-out, safe lifting techniques, and others as instructed. + Exposure to wet, humid conditions, moving mechanical parts, high areas, fumes, airborne particles, extreme temperatures, electrical risks, and vibrations depending on the area assigned + Must maintain a clean and safe work environment and report any food safety or quality issues immediately to management. **EEO Statement:** Winland Foods seeks to recruit, develop, and retain the most talented people from a diverse candidate pool, and as a global company we believe our success is enhanced by fostering equity and inclusion in the workplace. Therefore, Winland Foods is committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and teammates without regard to race, color, religion, sex, pregnancy, national origin, age, physical or mental disability, marital status, sexual orientation, gender identity, genetic information, military or veteran status, and any other characteristic protected by applicable law. **About Us** At Winland Foods, we're passionate about creating exceptional food experiences that bring people together. We are a dynamic and growing company specializing in meal preparation products-from pasta and sauces to plant-based proteins and more. Our portfolio includes beloved consumer brands and custom private-label solutions for retail and foodservice channels. **Why Work With Us?** We believe in being exceptional **from the land to the table** . That means: + **Commitment to Quality:** We consistently exceed industry standards across our value chain. + **Sustainability & Responsibility:** We prioritize environmental stewardship and make a positive impact on the world around us. + **People First:** The safety, well-being, and growth of our employees are at the heart of everything we do. **Our Culture** We're a team of food enthusiasts who value collaboration, innovation, and integrity. At Winland Foods, you'll find an environment where your ideas matter, your contributions are recognized, and your career can thrive. **Explore Opportunities** At Winland Foods, you'll find opportunities across operations, supply chain, marketing, and product development-roles where your work truly makes an impact. By joining our team, you become part of a forward-thinking organization that values passion, collaboration, and shared success with our customers. Together, we're shaping the future of food. **To All Recruitment Agencies** Winland Foods does not accept unsolicited agency resumes/CVs. Please do not forward resumes/CVs to Winland Foods employees, or any company location(s). Winland Foods is not responsible for any fees related to unsolicited resumes/CVs.

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Inspect and document that welds have been produced and implemented as required by all contract documents. Perform work with an outstanding attention to detail; read and understand construction plans, accurately document and report collected information, and communicate effectively with clients. This is a regular full-time position in the Buffalo, NY area. Responsibilities Perform internal and external inspections to determine if weldments and bolts meet the acceptance criteria of a specific code, standard or document Interpret regulations, codes and industry standards to apply to daily tests and inspections Compile and submit inspection reports, daily Perform other construction materials testing and inspection, when necessary Qualifications Must possess Certified Welding Inspector Certification through the American Welding Society (AWS CWI) Knowledge of industry standards including AWS and ASTM required Working knowledge of NDT methodologies, a plus Possess good interpersonal and communication skills Attention to detail and problem-solving skills Must possess and maintain a valid driver's license Compensation: $25 - 34/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Are you an experienced Mechanical Integrity Inspector looking to take the next step in your career? Join our West Seneca team and become part of a stable, supportive work environment where your expertise is valued-and where long-term careers are the norm, not the exception. You'll work alongside a close-knit group of Mechanical Integrity (MI) professionals with over 100 years of combined experience. The MI Team is proud to have one of the most experienced and longest-tenured teams in the company-and we're looking for someone who's ready to grow with us. Responsibilities: Perform field inspection and testing services for fixed equipment which may include, but not limited to API-510 Pressure Vessels, API-570 Process Piping and API-653 / STI SP001 Storage Tanks Perform non-destructive examinations using company-certified methods. Utilize software (UltraPipe, Excel) and governing standards to assess the fitness for service and remaining life of inspected equipment. Produce accurate isometric drawings of piping and equipment using AutoCAD. Communicate with customers regarding project setup, schedule, equipment needs, and inspection results. Locate, read, and understand the federal, state, and local requirements governing the equipment being evaluated. Read and interpret Process and Instrumentation Drawings (P&ID). Use appropriate personal protective equipment (PPE), including respirators, and follow health and safety practices. Perform routine maintenance on designated test equipment, such as ultrasonic equipment and air monitors. Qualifications: Over 5 years of experience in Mechanical Integrity Inspection, Nondestructive Examination (NDE), or a closely related field High school diploma required; an Associate's or Bachelor's degree in engineering or a related technical discipline is preferred At least one of the following certifications is required (more are preferred): API 510, API 570, and/or API 653; Level II qualification in MT, PT, UT, UTT, or ET, AWS Certified Welding Inspector (CWI) certification Proficient in AutoCAD, Microsoft Word, and Excel Valid driver's license with the ability to operate a motor vehicle for field testing and inspections Willingness and ability to travel locally and nationally on a regular basis Ability to pass a drug screening and vision test Physically capable of lifting up to 30 lbs and wearing a respirator and other personal protective equipment (PPE) Pay Range: Encorus Group is an equal opportunity employer (EOE/AA Disability/Veteran) and is committed to fair and equitable compensation for our employees. The pay range for this position is $28.00 - $40.00 per hour. Specific compensation for the successful candidate will be determined based on their knowledge, skills, and experience. Join Us! At Encorus, we value innovation, collaboration, and professional development. We offer a competitive benefits package, opportunities for career advancement, and paid training. If you're ready to take your career to the next level and make a significant impact, we want to hear from you! Visit our careers page at ************************************* to learn more and to apply.

Buffalo News Names Sealing Devices Inc. A Winner of The Metro Buffalo Top Workplaces 2024 Award Statement of Work: * Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. * Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. * Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. * Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. * Perform customer specific required Inspections and complete Inspection reports per the stated requirements. * Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. * Complete and submit customer documentation as required. * Document, identify and segregate nonconforming product in accordance with policies, procedures and work instructions. * Make requests to suppliers for missing or incorrect documentation. * Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. * Interact with other departments in a professional manner in addressing product quality and service issues. * Provide other departments with information and assistance to support them in accomplishing their objectives. * Contribute to and participate in improvement activities within the department and the company. * Follow departmental procedures and work instructions as written and recommend improvements as necessary. * Perform any other task/activity assigned by the supervisor within the scope of Company business. * Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements per the Sealing Devices Quality System What you will need to Succeed: * High School Graduate or General Education Degree (GED): Required * Associate's Degree (two year college or technical school) or Work Equivalent, Field of Study: Industrial Technology or Quality related field * Bachelor's Degree (four year college or technical school) Preferred, Field of Study: Industrial Technology or Quality related field * Computer Literacy (MS Office), 2 plus years of experience in mechanical inspection and blueprint reading required. * Knowledge of GD&T, basic statistical techniques, automated inspection experience preferred. * ASQ Certified Quality Technician (CQT) preferred Benefits offered for this role: * Medical/Dental/Vision Coverage * Health Reimbursement Account (HRA) provided by Company * 401K * Paid Vacation & Holidays * Free Life Insurance for Employee * Flex Spending - Medical, Dental, Vision and Child Care * Employee Referral Program * Company Sponsored Training * Profit Sharing - Earn up to 18% of your gross wages after one-year anniversary * Free Employee Assistance Program * Wellness Programs - Onsite Reflexology, Chair Massage, Nutritional Sessions, Chiropractic * Legal Shield and Aflac * Employee Recognition Program * Company Celebrations - Including: Lunches, Breakfasts, Ice Cream Truck, Holiday Parties * Career Advancement Opportunities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. * Ability to sit or stand for extended periods of time while performing detailed inspections and working at inspection stations. * Regularly required to lift, carry, and move materials or product up to 25 pounds; occasional lifting of heavier items with assistance. * Frequent use of hands and fingers to handle small parts, operate measuring instruments, and input data into computer systems. * Ability to perform repetitive motions of the wrists, hands, and arms during part handling and equipment use. * Requires close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus for precision inspection tasks. * Must be able to hear verbal instructions, alarms, and signals in a manufacturing environment. * Occasional reaching, stooping, bending, turning, or crouching to retrieve or position parts and materials. * Ability to work in both office and production environments, which may involve moderate noise levels, temperature variation, and use of personal protective equipment (PPE) when required. Salary ranges for this position are determined based upon the job location and can be adjusted based upon experience, reflecting our commitment to valuing the expertise and contributions of our individual team members. Salary range for this role is $22-27/hr based upon experience.

Whitestone Associates, Inc., a 100% employee-owned company and leading provider of environmental and geotechnical engineering and consulting services throughout the eastern US, is currently recruiting for a Steel Inspector to join our team. This is a tremendous opportunity for experienced candidates to join and contribute to the growth of a 100% employee-owned engineering firm. Salary commensurate with experience. We are seeking an experienced Steel Inspector to perform construction phase testing and inspection of structural steel and welding at various client sites throughout the region. The ideal candidate will have 3-10 years of experience in structural steel inspection and welding inspection. Location: Buffalo, NY Responsibilities: Conduct construction phase testing and inspection of structural steel and welding at various client sites; Perform non-destructive testing utilizing Ultrasonic Testing methods; Inspect timber framing installations; Assist with other special inspections as needed; and Travel to project sites as required. Requirements: American Welding Society - Certified Welding Inspector (CWI) certification required; Non-destructive testing proficiency in Ultrasonic Testing (UT) required; Timber framing inspection experience; Proficient in Microsoft Office suite; Comfortable working at heights; Ability to work independently with minimal supervision; and Valid driver's license and willingness to travel. Preferred Qualifications: Prior experience with geotechnical and/or environmental field investigation; Prior experience with structural steel construction and fabrication; ICC Bolting/Welding Certification UT Inspector Certification Engineer in Training (EIT) certification; and ACI, AASHTO, or ICC certifications. Benefits: The estimated range for this position is $28/hr to $37/hr Whitestone's Employee Stock Ownership Program (offered at no cost to each eligible employee) Medical Insurance Dental Insurance Health & Dependent Care Flexible Spending Accounts Traditional & Roth 401K Plans with Company Match Long Term & Short Term Disability Insurance Company-Sponsored Life & AD&D Insurance Multiple AFLAC Insurance Products Pet Insurance Identity Theft Protection Multiple Corporate Discount Programs

About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities: Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities: Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

Job Description About Us iNRCORE, LLC is a world-class manufacturer of custom and catalog magnetic solutions. With employees worldwide, iNRCORE is a growing international partner with Gowanda Components Group and Bicron Manufacturing, to design, manufacture and sell specialty electronic components. For over 70 years iNRCORE has deployed reliable and intelligent solutions to power the world's next generation of systems. iNRCORE is committed to supplying the highest level of compliance and innovation to customers' most demanding applications from the frontlines of defense to the frontiers of space exploration. iNRCORE's power and signal magnetic components are utilized to help save lives, generate powerful connections and further the knowledge of the cosmos. When failure is not an option, the world trusts iNRCORE. iNRCORE models itself after its products - Rugged to the Core. About the Position The Quality Inspector is responsible for inspecting, auditing, and reporting on materials, processes, and products using variable and attribute measuring instruments and techniques to ensure conformance with the company's quality standards. Essential Duties and Responsibilities Inspect and approve incoming materials by confirming specifications, conducting visual and mechanical measurement tests, and rejecting and returning nonconforming materials. Inspects in-process and/or finished products by confirming specifications and drawings, conducting visual and mechanical measurement testing, returning nonconforming product for rework, and verifying and validating the completed rework. Documents inspection results by completing the required reports and logs on a timely basis while summarizing rework and scrap while inputting the data into the respective database. Inspect high reliability parts based on the J-STD-001 and Space Addendum and accept/reject based on IPC-A-610 requirements under a high-power microscope. Accomplishes quality and organization mission by completing related results as needed. Reading and interpreting electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Knowing the definitions of critical, major, and minor characteristics. Schedule: Monday through Friday 5 am to 1:30 pm Qualifications Education/Experience: A two-year technical certificate or equivalent experience required. Knowledge/Skills/Abilities : Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization. To perform this job successfully, an individual should have knowledge and expertise in using Microsoft Office software (Outlook, Excel, Word, and PowerPoint) Must have the ability to read and interpret electronic drawings and customer supplied blueprints and drawings and have a basic knowledge of statistical techniques. Must have experience using electronic and mechanical testing equipment. Prefers someone have a good working knowledge of using and referencing military and industry standards, Prefers someone who has a general knowledge of ASME Y14.5M, working knowledge of GD&T, and must understand the x, y, and z coordinate system. Must know basic statistical terms and techniques, how to enter and plot data as well as recognize out-of-control conditions. Must understand types of measurement, measurement terminology and the diverse types of measurement scales. Must know the difference between accuracy and precision and be able to select the appropriate measuring tools and techniques. Must understand lot level traceability based on product, processes, and raw material. Must have a strong knowledge of basic mathematical operations and perform measurement conversions; be able to solve for x; add and subtract degrees, minutes, and seconds. Why should you join our team? Our team is growing! We collaborate and use innovation to build meaningful relationships, both internally with colleagues and externally with customers. Our business casual dress code allows you personality to shine through. Our new facility is clean, spacious, and located near I-95, with a variety of local restaurants easily accessible. Although you can occasionally enjoy a variety of snacks on-site too! We are committed to providing our employees with a comprehensive package that stands as one of the most competitive within the manufacturing and engineering industries. All benefits start immediately, which means no waiting periods for you or your family! Medical, Dental, Vision, & Prescription plans Flexible Spending Accounts (FSA) Health Savings Accounts (HSA) 401K Program with Employer Match Group Life Insurance Long Term Disability Coverage Vacation, Sick, and Floating Holidays (in addition to 7 paid holidays) This position is not eligible for relocation allowance. iNRCORE, LLC is an equal-opportunity organization. We recruit, employ, train, compensate and promote without regard to race, religion, creed, color, national origin, age, gender, sexual orientation, gender identity, marital status, disability, veteran status, or any other basis protected by applicable federal, state or local law. At iNRCORE, we are committed to fostering an inclusive, accessible environment, where all employees are valued and supported. If you are a candidate with a disability and need an accommodation to complete the application process, please contact Caity Dawson at *************************. Include your full name and the best way to reach you, along with the accommodation needed to assist you with the application process. Veterans encouraged to apply.

Work Schedule Standard (Mon-Fri) Environmental Conditions Able to lift 40 lbs. without assistance, Adherence to all Good Manufacturing Practices (GMP) Safety Standards, Cold Room/Freezers -22degreesF/-6degrees C, Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.), Warehouse, Will work with hazardous/toxic materials Job Description As part of the Thermo Fisher Scientific team, you'll discover meaningful work that makes a positive impact on a global scale. Join our colleagues in bringing our Mission to life every single day to enable our customers to make the world healthier, cleaner and safer. We provide our global teams with the resources needed to achieve individual career goals while helping to take science a step beyond by developing solutions for some of the world's toughest challenges, like protecting the environment, making sure our food is safe or helping find cures for cancer. Location/Division Specific Information: First Shift: Monday - Friday 7am - 330pm (may require start and end time flexibility based on training and production needs) The Thermo Fisher Scientific BioProduction division, located at 3175 Staley Road Grand Island NY 14072, supports developers and manufacturers of biological-based therapeutics and vaccines with a portfolio of premium cell culture media and buffers as well as on site custom services dedicated to upstream cell culture, downstream purification, analytics for detection and quantitation of process/product impurities, and a catalog of single-use solutions spanning the biologics workflow. How Will You Make an Impact?: We need a motivated individual with excellent communication and laboratory skills to coordinate and complete planned and detailed activities within a quality system to ensure product, process, system, or equipment quality requirements are met. A Day in the Life: Perform wet chemical analyses based on both internal and Compendia (USP, EP, ACS, etc) based methodologies on raw materials (i.e. salts, sugars, amino acids, vitamins, etc) . Perform physical inspection and documentation review of incoming manufacturing components. Education: Required: High School Diploma required Preferred: AAS or Bachelors degree in Chemistry, Biology, or other Sciences Experience: Preferred: Experience in a cGMP environment/QC or QA related field Knowledge, Skills, Abilities: Required: Strong organizational skills and the ability to work independently. Required: Ability to work in a high paced team environment, prioritize work accordingly. Required: General digital literacy, specifically in Microsoft office programs. Preferred: 1-2 years of Chemistry lab experience (wet Chemistry lab work and safety protocols). Physical Requirements / Work Environment: Able to lift 40 lbs. without assistance Adherence to all Good Manufacturing Practices (GMP) Safety Standards Occasionally required to enter Cold Room/Freezers -22degreesF/-6degrees C Some degree of PPE (Personal Protective Equipment) required (safety glasses, gowning, gloves, lab coat, ear plugs etc.) Will work with hazardous/toxic materials What We Offer: Compensation Competitive Pay Performance Related Bonus where eligible Annual merit performance-based increase Excellent Benefits Medical benefits Paid Time Off/Annual Leave Employee Referral Bonus Career Advancement Opportunities Compensation and Benefits The hourly pay range estimated for this position based in New York is $16.95-$25.42. This position may also be eligible to receive a variable annual bonus based on company, team, and/or individual performance results in accordance with company policy. We offer a comprehensive Total Rewards package that our U.S. colleagues and their families can count on, which includes: A choice of national medical and dental plans, and a national vision plan, including health incentive programs Employee assistance and family support programs, including commuter benefits and tuition reimbursement At least 120 hours paid time off (PTO), 10 paid holidays annually, paid parental leave (3 weeks for bonding and 8 weeks for caregiver leave), accident and life insurance, and short- and long-term disability in accordance with company policy Retirement and savings programs, such as our competitive 401(k) U.S. retirement savings plan Employees' Stock Purchase Plan (ESPP) offers eligible colleagues the opportunity to purchase company stock at a discount For more information on our benefits, please visit: *****************************************************

Job Description GTI specializes in the design, engineering, fabrication, and deployment of custom modular structures, shipping container-based structures, and ballistic metal fabrication. We serve multiple industries, including DOD contractors, military, disaster relief, and commercial markets. Our containerized and modular solutions are all built in-house at our factory in Buffalo, NY. Manufacturing capabilities range from military training, live fire enclosures, bathroom/shower units, expeditionary camps, medical facilities, water treatment, electrical/energy storage enclosures, and much more. The GTI team consists of more than 50 professionals spanning from fabrication and engineering to government and military specialists. Our combination of expertise allows us to provide top quality solutions and customer service for various industries and missions. The QC Technician is responsible for the inspection and testing of materials and finished products at various stages of the manufacturing process to ensure they comply with all applicable laws, industry codes & standards, as well as Company and Customer specifications/standards. Job Responsibilities: Develop and maintain inspection reports. Ensure compliance with federal and state laws, as well as company standards and specifications. Maintain calibration of quality control equipment. Perform inspections across all stages of production. Prepare and maintain test data for review. Evaluate data and draft reports, noting any relevant deviations from existing standards. Identify areas for quality control improvement and implement new methods accordingly. Communicate quality or compliance concerns with urgency. Other duties as assigned by the QA Manager. Required Qualifications: High school diploma or general education degree (GED) required. Solid understanding of measuring, inspection and test equipment. Minimum of 2-5 years of inspection and/or production experience in the metals fabrication industry. Visual weld and welding inspection experience. Proficiency with Microsoft Office programs, specifically Excel. Strong working knowledge of various mathematical concepts including fractions, ratios, and proportions. Ability to lift and/or move up to 50 pounds occasionally. Specific vision abilities required include close vision, color vision, and the ability to adjust focus. (minimum required visual acuity - 20/20 corrected or uncorrected) Demonstrated ability to work independently with minimal supervision. Excellent organizational skills. Demonstrated ability to analyze and interpret information. Ability to read and interpret mechanical, electrical, and fabrication drawings. Preferred Qualifications: Associate or bachelor's Degree in a related field. AWS Certified Welding Inspector - CWI. GrowTech Industries, LLC is committed to equal opportunity for all, without regard to race, religion, color, national origin, citizenship, sex, sexual orientation, gender identity, age, veteran status, disability, genetic information, or any other protected characteristic.

LEGENDS GLOBAL Founded in 2008, Legends is a premium experiences company with six divisions operating worldwide - Global Planning, Global Sales, Global Partnerships, Hospitality, Global Merchandise, and Legends IQ- offering clients and partners a 360-degree data and analytics fueled service solution platform to elevate their brand and execute their vision. Currently, Legends works with marquee clients across business verticals including professional sports; collegiate; attractions; entertainment; and conventions and leisure. We are the industry leaders in designing, planning and realizing exceptional experiences in sports and entertainment. GLOBAL MERCHANDISE Recognized leaders in retail and merchandising worldwide, Legends Global Merchandise provides a fully customized, customer-centric, omnichannel shopping experience for fans. Our vertical service solution allows us to provide the latest trends, styles, designs, and brand collaborations across different categories. For in-venue, e-commerce and pop-up operations, Legends sets the standard when it comes to a unique shopping experience. We pride ourselves in creating a customized portfolio of inventory based on each property and operating as a true extension of each client's brand. Different guests want different things, and we are here to build and provide a tailored retail experience. THE ROLE The Inspector/Quality Assurance role is responsible for ensuring the customer end product meets Company and customer standards and specifications in a fast-paced silkscreen operation. ESSENTIAL FUNCTIONS The quality control and production facilitator plays a vital role in the ongoing production functions of the Company. Other duties may be assigned to meet business needs. The essential duties and responsibilities of the position include: Monitoring print quality Counting and sorting garments Verifying accuracy to customer specifications Tagging and boxing Completing work orders Assisting press operators as needed Maintains a clean organized work area Functions well as part of a team with the entire production department Other Duties The quality control and production facilitator has additional ongoing functional responsibilities, including: Assists in the development and/or institutes new procedures to improve accuracy and quality of products QUALIFICATIONS Based on the essential and other duties and responsibilities of the position, the quality control and production facilitator should have a number of professional skills and abilities: Accuracy and strong attention to detail is required Ability to effectively prioritize responsibilities, meet assigned deadlines, and manage the related stress Sound organizational, records management, time management skills COMPENSATION Hourly rate of $17.00-$19.00 commensurate with experience, and a generous benefits package that includes medical, dental, vision, life and disability insurance, paid vacation, and 401k plan. WORKING CONDITIONS Location: On Site - Buffalo, NY PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. NOTE: The essential responsibilities of this position are described under the headings above. They may be subject to change at any time due to reasonable accommodation or other reasons. Also, this document in no way states or implies that these are the only duties to be performed by the employee occupying this position. Legends Global is an Equal Opportunity/Affirmative Action employer, and encourages Women, Minorities, Individuals with Disabilities, and protected Veterans to apply. VEVRAA Federal Contractor.

Parallel Employment Group in partnership with an aerospace manufacturer in East Aurora is looking for Quality control inspectors to join the team. In this role the Quality Inspector ensures all assigned inspections are properly completed and documented in compliance with established policies and procedures and corresponding inspection forms and reports are properly executed prior to releasing products for use. Shifts available: 1st and 2nd shift Pay Rate $18.50 to $24.50 Responsibilities Use and interpret work instructions and associated documents to ensure conformity of product. Performs final inspection of the product. Ensure all assigned inspections are properly completed in compliance with established policies and procedures and corresponding inspection records, reports, and forms are properly executed prior to releasing products. When necessary, create nonconforming material reports. Performing analysis, inspection, troubleshooting, and testing of products or components identified as non-conforming during an in-process and final inspection. Maintain inspection equipment, ensuring that it is used within the calibration cycle, and is in good working condition. Identify areas for improvement and participate in continuous improvement projects. Prepare accepted product for use by appropriately labeling product to indicate status and printing unique device identification labels as necessary. Performs other related duties and responsibilities as assigned. Requirements High School Diploma or equivalent At least 2 years' experience in Quality Inspection role Proficient in all aspects of inspection including using and maintaining all inspection equipment Experience with reading inspection processes and interpreting engineering drawings required Expertise in the application and use of gauges and inspection equipment Strong communication, organizational, documentation and time management skills Analytical, logical thought process and meticulous attention to detail Ability to work independently and as a member of the Quality team and other cross-functional teams as required Strong skills in Microsoft Office Suite with the ability to learn various manufacturing software systems Experience with ISO9000 or AS9100 Quality Systems a plus Parallel Employment Group is an equal opportunity employer #ind456

Are you passionate about being part of a Team that will become the most trusted medical device machining service provider? Are you tired of mundane cubicle roles? Join Team Orchard Park as a Quality Technician, state-of-the-art, inspection equipment and realize your full potential as a High Impact member of our Quality team. New employees are eligible for the following benefits effective date of hire! Medical, dental, and vision benefits Company-paid life insurance Generous Paid time off and 10 paid Holidays 401k Plan with Company Match Tuition Reimbursement Attendance Bonus paid monthly GROWTH: This is an outstanding opportunity for a Quality Technician/CMM Programmer that has an attention to detail, thrives in cross-functional teams, and is ready for the next big challenge. You will be working in a highly dynamic work environment that encourages and promotes developmental growth in many areas. MISSION: We collaborate and innovate with our customers to provide the highest quality, life enhancing medical devices in the world. Key Responsibilities: Program, operate and troubleshoot automated inspection equipment, including CMM, Smart Scopes, and VICI systems, to ensure accurate product measurements. Interpret blueprints and technical drawings using GD&T principles. Conduct First Article Inspections. Utilize manual measurement tools (e.g., micrometers, pin gages, ring gages) Conduct root cause investigations for non-conforming equipment or parts. Write, improve, and submit work instructions for review and release to ensure standardized processes. Education, Experience, and Skills: High school diploma 2 - 5 years of experience programming and operating automated inspection equipment (e.g., CMM, Smart Scopes, VICI). Ability to read and assess product drawings Demonstrate understanding of basic Quality System Regulations Working knowledge of Excel and database programs Basic understand of automated systems and programming We offer market competitive compensation. Potential salary range for this role is $25.00-$30.00. Actual pay will be determined based on experience, qualifications, geographic location, and other job-related factors permitted by law. CLICK HERE FOR A SITE TOUR! ** All job offers are contingent on passing a background check and drug test (including THC)

Buffalo News Names Sealing Devices Inc. A Winner of The Metro Buffalo Top Workplaces 2024 Award Statement of Work: Follow all company policies, procedures, and work instructions in the completion of daily activities with minimal input and supervision to ensure successful accomplishment of company objectives. Perform Receiving Inspections to verify that incoming parts, materials, and related documentation meet requirements and are suitable for use. Perform First piece, In-process, Last piece, and Final inspections per sampling plans, product requirements, and job instructions to verify product conformity. Perform First Article Inspections to ensure manufacturing die, tooling, and other manufacturing methods result in product meets customers drawing requirements. Perform customer specific required Inspections and complete Inspection reports per the stated requirements. Document, identify, and segregate nonconforming product in accordance with policies, procedures, and work instructions. Complete and submit customer documentation as required. Document, identify and segregate nonconforming product in accordance with policies, procedures and work instructions. Make requests to suppliers for missing or incorrect documentation. Use appropriate measuring devices and automated inspection equipment to perform inspections including basic programming of automated inspection equipment. Interact with other departments in a professional manner in addressing product quality and service issues. Provide other departments with information and assistance to support them in accomplishing their objectives. Contribute to and participate in improvement activities within the department and the company. Follow departmental procedures and work instructions as written and recommend improvements as necessary. Perform any other task/activity assigned by the supervisor within the scope of Company business. Maintain a safe and clean working environment by complying with policies, guidelines, and regulatory requirements per the Sealing Devices Quality System What you will need to Succeed: High School Graduate or General Education Degree (GED): Required Associate's Degree (two year college or technical school) or Work Equivalent, Field of Study: Industrial Technology or Quality related field Bachelor's Degree (four year college or technical school) Preferred, Field of Study: Industrial Technology or Quality related field Computer Literacy (MS Office), 2 plus years of experience in mechanical inspection and blueprint reading required. Knowledge of GD&T, basic statistical techniques, automated inspection experience preferred. ASQ Certified Quality Technician (CQT) preferred Benefits offered for this role: Medical/Dental/Vision Coverage Health Reimbursement Account (HRA) provided by Company 401K Paid Vacation & Holidays Free Life Insurance for Employee Flex Spending - Medical, Dental, Vision and Child Care Employee Referral Program Company Sponsored Training Profit Sharing - Earn up to 18% of your gross wages after one-year anniversary Free Employee Assistance Program Wellness Programs - Onsite Reflexology, Chair Massage, Nutritional Sessions, Chiropractic Legal Shield and Aflac Employee Recognition Program Company Celebrations - Including: Lunches, Breakfasts, Ice Cream Truck, Holiday Parties Career Advancement Opportunities Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Ability to sit or stand for extended periods of time while performing detailed inspections and working at inspection stations. Regularly required to lift, carry, and move materials or product up to 25 pounds; occasional lifting of heavier items with assistance. Frequent use of hands and fingers to handle small parts, operate measuring instruments, and input data into computer systems. Ability to perform repetitive motions of the wrists, hands, and arms during part handling and equipment use. Requires close vision, color vision, peripheral vision, depth perception, and the ability to adjust focus for precision inspection tasks. Must be able to hear verbal instructions, alarms, and signals in a manufacturing environment. Occasional reaching, stooping, bending, turning, or crouching to retrieve or position parts and materials. Ability to work in both office and production environments, which may involve moderate noise levels, temperature variation, and use of personal protective equipment (PPE) when required. Salary ranges for this position are determined based upon the job location and can be adjusted based upon experience, reflecting our commitment to valuing the expertise and contributions of our individual team members. Salary range for this role is $22-27/hr based upon experience.

CME Associates, Inc. (CME) is an engineering technology firm providing comprehensive Construction Materials Evaluation and Technical Support Services. Our experts specialize in geotechnical engineering, construction materials evaluation, special inspections, geological sciences, subsurface exploration, and investigative engineering. Summary Perform material testing services for concrete and asphalt at producer plants in accordance with established testing methods and standards. Responsibilities Test construction materials such as concrete and asphalt for quality control/quality assurance in material plants Read construction documents and specifications and correctly interpret test results Record and report test results in a clear, concise manner Complete each testing assignment accurately and in accordance with the appropriate standards Turn in field data records and completed reports for each project daily Communicate regularly with direct supervisor to provide updates on project details Complete continuing education and preparation for additional certifications Qualifications High School Diploma required Desirable Certifications for this position are ACI Grade 1 Concrete, NYCMA QC/QA Certification; CME will provide full support in obtaining these certifications if do not currently possess Possess ability to maintain effective working relationships with managers, co-workers and clients through clear communication and proactive progress reporting Familiarity with construction materials, procedures and documents a plus Must possess and maintain a valid driver's license Must possess reliable transportation and current/required automotive insurance coverage Compensation: $20 - 25/hour Benefits CME offers competitive wages and benefits such as: Health, Dental, Vision, 401K, Health Savings Account, Supplemental Insurance Products, and Paid Time Off (including Holiday, Vacation, Sick and Personal) for full time employees. This is an Equal Employment Opportunity. All qualified applicants will be afforded equal employment opportunity without regard to race, color, sex, age, marital status, sexual orientation, gender identity, religion, national origin, disability, status as a protected veteran, or any other characteristic protected by federal, state, and local laws. CME Associates, Inc. is an Affirmative Action Employer. A New York State Certified Woman Owned Business Enterprise (WBE).

Job DescriptionQuality Control Technician (2nd Shift - 3:30 - Midnight) Also known as: Quality Inspector, QC Inspector, QA Technician, Quality Assurance Technician, Manufacturing Quality Technician, Welding Inspector, Metal Fabrication Inspector, Structural Steel Inspector, Production Quality Technician Location: Buffalo, NY | Schedule: Monday-Friday, 3:30 PM-12:00 AM | Pay range: 20-25 an hour with Shift differential GTI Fabrication manufactures custom modular structures, energy storage enclosures, and container-based systems for military, defense, energy, and commercial industries. We specialize in metal fabrication, welding, assembly, structural steel, and modular construction at our Buffalo, NY facility. We are hiring a 2nd Shift Quality Control Technician (Quality Inspector / QC Inspector) to perform inspections on welded, fabricated, and assembled components throughout the manufacturing process. Responsibilities Perform incoming, in-process, and final inspections on fabricated metal parts, welds, and assemblies Conduct visual weld inspections and dimensional inspections Read and interpret blueprints, weld symbols, fabrication drawings, and mechanical prints Maintain accurate QC reports, inspection logs, and test data Calibrate and maintain measurement tools and QC equipment Identify nonconformities (NCRs) and communicate issues to supervisors Support continuous improvement for quality assurance and welding quality Work closely with fabrication, welding, assembly, and engineering teams Qualifications 2-5 years of experience as a Quality Control Technician, Quality Inspector, QC Inspector, Welding Inspector, or Manufacturing Quality Technician Experience with weld inspection and metal fabrication inspection Proficiency using calipers, gauges, tape measures, squares, and weld inspection tools Ability to read and interpret mechanical drawings, fabrication prints, and electrical diagrams Strong math skills (fractions, decimals, tolerances) Ability to lift 50 lbs and work in a shop-floor production environment High school diploma or GED Preferred: AWS CWI certification or working toward certification Experience in welding, structural steel, modular manufacturing, or industrial fabrication GrowTech Industries, LLC is an equal opportunity employer. 2nd Shift - Monday-Friday 3:30 - Midnight