Quality control inspector jobs in New Haven, CT - 236 jobs

Responsible for quality control review activities for the Bank's loan portfolio. The Loan Servicing Quality Control Specialist will assist in creating and maintaining QC requirements related to loan operations. This will include validating system reports, follow-up for missing or inaccurate information, and performing other duties pertaining to the loans held, serviced, originated, or sold by the Bank. In addition, this candidate will monitor and review all necessary quality control tasks to ensure they are performed in compliance with Bank policies and procedures. The desired candidate will have a very strong attention to detail with the ability to quickly resolve any issues to mitigate both monetary and reputational risk. ESSENTIAL FUNCTIONS: Performs reviews related to reports and/or loans in accordance with the department's procedures to ensure customer and bank expectations are met. Maintains existing procedures/processes and coordinates implementation of new procedures/processes to ensure the Bank is in compliance with applicable regulatory requirements, as needed. Updates and maintains quality control log, note inventory log, and PIF log. Performs quality control reviews on all new loan files to include core system and documentation. Performs quality control activities on closed and denied/withdrawn loans as defined in policies and procedures. Reviews quality control departmental reports for maintenance activities, accuracy and completion. Follows up for any post-closing documentation items and escalates any time delays or issues related to quality control to appropriate management team to ensure items are resolved timely and accurately. Maintains industry knowledge, stays abreast of regulatory changes with regards to all loan origination and operation. Updates procedures as these environments change. Reviews daily rates to ensure accuracy on the core system. Reviews and mails all system generated notices. Completes internal file audits to ensure accuracy and originals are maintained per regulatory requirements. Prepares PIC posting sheets daily to ensure allocation of loans to appropriate GL. Supports document imaging initiatives. Balances DDA and GL accounts. Performs other related duties as required. REQUIRED EDUCATION / EXPERIENCE / SKILLS: Post high school education with one (1) to three (3) years of mortgage loan servicing experience or some comparable combination of education and experience. Knowledge of all pertinent regulations related to Residential, Consumer, and Commercial lending. Excellent written and verbal communications skills. Strong customer service orientation. Proficient operation of the Bank's loan servicing system and Microsoft software such as Word, Excel, and Outlook. Working knowledge of the Bank's loan product offerings, Bank loan regulations and the Bank's loan policies and procedures. Ability to interact with co-workers and customers in a positive manner. Ability to exchange information with others clearly and concisely: to present ideas, facts and technical information. Ability to perform under stress when confronted with critical timeline constraints and large work volumes. Ability to perform a variety of duties within the department, after receiving appropriate cross training, without the loss of efficiency or composure. Ability to receive guidance and supervision and follow work rules and procedures. Ability to meet deadlines, and to meet punctuality and attendance standards. Ability to systematically identify task requirements and monitor progress towards accomplishment. Ability to maintain relationships that facilitate task accomplishment, to cooperate and resolve conflicts, to recognize needs and be sensitive to others and to convince and persuade. Ability to work independently as well as in a team-based environment. Ability to learn quickly with a strong attention to detail and problem-solving. Windsor Federal Bank, an Equal Opportunity Employer, offers a competitive compensation and benefits package including vacation, personal days, paid sick time, holidays, participation in a 401(k) plan, and profit sharing. For consideration for this position, send resume to: ********************************* Windsor Federal Bank, 270 Broad Street Windsor, CT 06095 An Equal Opportunity Employer

Quality Control Supervisor Our client, a leading biopharmaceutical company, is seeking an experienced Quality Control Supervisor to join their team. This role is responsible for overseeing QC operations in a GMP-regulated environment, ensuring compliance with regulatory standards and internal procedures. Key Responsibilities: Supervise and mentor QC analysts; provide technical guidance and support. Ensure compliance with cGMP, USP, and 21 CFR Parts 210 & 211. Review and approve analytical data, investigations, and CAPAs. Troubleshoot analytical instruments (HPLC, GC, PSD) and support method validation and transfers. Manage testing schedules for raw materials, finished products, stability, and validation samples. Qualifications: BS in a scientific discipline with 5+ years of experience or MS with 3+ years. Hands-on experience with HPLC and Empower software. Strong knowledge of cGMP, USP, and ICH guidelines. Supervisory experience required. This is an excellent opportunity to join a growing organization and make an impact, please apply in directly for more information!

ID 2026-18112 The FPI Level II Inspector will perform nondestructive testing (NDT) using the Fluorescent Penetrant Inspection (FPI) method in accordance with applicable codes, standards, and customer specifications. The Level II Inspector is responsible for conducting inspections, interpreting and evaluating results, and documenting findings in compliance with NAS-410 or SNT-TC-1A certification requirements. Salary: $26.50/hr DOE Responsibilities Perform fluorescent penetrant inspections in accordance with approved procedures, work instructions, and specifications. Interpret and evaluate test results for acceptance or rejection determinations. Set up and verify equipment functionality and process parameters prior to inspection. Maintain accurate and detailed inspection records, reports, and data logs. Ensure proper use and maintenance of inspection equipment, materials, and process controls. Support process audits and continuous improvement initiatives within the NDT department. Follow all company safety policies, procedures, and quality standards. Provide guidance and on-the-job training to Level I personnel and trainees, as applicable. Skills / Qualifications High School Diploma or equivalent required; technical or associate degree preferred. Certification to NAS-410 or SNT-TC-1A Level II in Fluorescent Penetrant Inspection (FPI) required. Demonstrated experience performing FPI inspections in an aerospace, defense, or materials testing environment. Working knowledge of applicable industry standards (e.g., ASTM, MIL, or customer-specific specifications). Strong attention to detail with the ability to interpret complex technical requirements. Excellent communication, documentation, and organizational skills. Ability to work independently and collaboratively in a team environment. Company Overview Element is one of the fastest growing testing, inspection and certification businesses in the world. Globally we have more than 9,000 brilliant minds operating from 270 sites across 30 countries. Together we share an ambitious purpose to 'Make tomorrow safer than today'. When failure in use is not an option, we help customers make certain that their products, materials, processes and services are safe, compliant and fit for purpose. From early R&D, through complex regulatory approvals and into production, our global laboratory network of scientists, engineers, and technologists support customers to achieve assurance over product quality, sustainable outcomes, and market access. While we are proud of our global reach, working at Element feels like being part of a smaller company. We empower you to take charge of your career, and reward excellence and integrity with growth and development. Industries across the world depend on our care, attention to detail and the absolute accuracy of our work. The role we have to play in creating a safer world is much bigger than our organization. Diversity Statement At Element, we always take pride in putting our people first. We are an equal opportunity employer that recognizes diversity and inclusion as fundamental to our Vision of becoming "the world's most trusted testing partner". All suitably qualified candidates will receive consideration for employment on the basis of objective work related criteria and without regard for the following: age, disability, ethnic origin, gender, marital status, race, religion, responsibility of dependents, sexual orientation, or gender identity or other characteristics in accordance with the applicable governing laws or other characteristics in accordance with the applicable governing laws. The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) "If you need an accommodation filling out an application, or applying to a job, please email "

WHO ARE WE: BlackHawk Industrial provides you the highest quality industrial products and equipment, offering manufacturing services while creating innovative engineered supply solutions. We truly believe in the importance of the local relationships with the customers we service. Our employees have fun every day exceeding the expectations of our customers, suppliers, and shareholders. We distinguish ourselves as the #1 choice of industrial manufacturers who are in need of Technical Service and Production Savings. We are BIG ENOUGH TO SERVE, and SMALL ENOUGH TO CARE. **This position is located onsite in Southington, CT** SUMMARY: The Quality Inspector is responsible for inspection of cutting tools by reading prints and inspecting tools by using micrometers, calipers, comparators, indicators and other measuring tools/machines, to ensure that they meet quality standards. ESSENTIAL DUTIES AND RESPONSIBILITIES: Personally exhibits, recruits and coach's associates consistent with Core Behaviors Responsible for promoting culture of safety Perform final quality inspection of finished products in accordance with the established procedures Report all instances of rejected product or raw materials problems to management Inspect incoming raw materials as materials are received Document appropriate information for quality inspection reports for each order Create and maintain current files for all quality related correspondence Work with shop floor supervisor to review internal rejects from the shop floor Report any unusual discrepancies or problems promptly to management Perform internal quality audits Perform other related duties as assigned Knowledge and ability to use micrometers, vernier caliper, radius gages and other video inspection equipment Competent with applying math skills/tool geometry SKILLS: Knowledge of cutting tools Excellent math aptitude Excellent customer service skills Excellent communication, interpersonal and organizational skills Diplomatic and professional when resolving issues Work well under pressure, and have exceptional time management skills Self-motivated and able to work independently Must be able to follow instructions in a fast paced, flexible environment EDUCATION and/or EXPERIENCE: High School Diploma or equivalent required Prior experience inspecting aerospace cutting tools preferred CERTIFICATES, LICENSES, REGISTRATIONS: None required WORK ENVIRONMENT: Employee is regularly required to speak and hear English, stand, walk, sit, use hand to finger, handle or feel objects, tools, or controls; reach with hands and arms. Employees are required to use computers and other equipment. Employees frequently lift and/or move up to 40 pounds. Specific vision abilities include close vision and the ability to clearly focus vision. PPE REQUIRED: Wrist rests for keyboard and mouse pad. Eye protection, ear protection, steel-toed shoes as required BENEFITS: Health Insurance BCBS of OK HDHP HSA with Employer match (must meet criteria) Dental and Vision Insurance 401K Plan and Company Match FSA (Full FSA, Limited FSA, and Dependent FSA) Company paid Long Term and Short-Term Disability Company paid basic Life Insurance and AD&D/ Supplemental life and AD&D/Dependent life Ancillary Critical Illness Insurance (Wellness Rider Included) Ancillary Accident Insurance (Wellness Rider Included) Ancillary Hospital Indemnity Employee Assistance Program (EAP) - Includes concierge services and travel assistance. Paid Time Off Holiday Paid Time Off Gym Reimbursement Quarterly Wellness challenge with a chance to will money or prizes Tuition Reimbursement - after 1 year of employment *BlackHawk Industrial is an Equal Opportunity Employer **As part of our BHID policy, we require all potential employees to undergo pre-employment background and drug screening. This is a standard procedure we follow to ensure a safe and productive work environment.

The Quality Inspector will be responsible for performing inspections and ensuring compliance with quality standards for machined components and assemblies. This role requires strong knowledge of machining processes, precision measurement tools, and quality procedures to maintain product integrity and customer satisfaction. Key Responsibilities Perform in-process and final inspections on machined parts and assemblies. Verify dimensions using precision measuring instruments (calipers, micrometers, gauges, shadow graph). Interpret engineering drawings, blueprints, and specifications. Document inspection results and maintain accurate records in accordance with company procedures. Identify and report non-conformances; assist in root cause analysis and corrective actions. Ensure compliance with ISO 9001 and internal quality standards. Collaborate with production and engineering teams to resolve quality issues. Qualifications High school diploma or equivalent; technical certification preferred. Minimum 3 years of experience in quality inspection within a machining/manufacturing environment. Strong understanding of machining processes and tolerances. Proficient in the use of precision measuring tools and equipment. Ability to read and interpret technical drawings and GD&T. Familiarity with quality systems and documentation practices. Excellent attention to detail and problem-solving skills. Physical Requirements and Work Environment Ability to stand for extended periods, lift up to 25 lbs, and work in a manufacturing environment with exposure to noise and machinery. #LI-KP1

Introduction The mission of the New Haven Health Department is to ensure and advocate for the health and well-being of all New Haven residents. The Bureau of Environmental Health maintains as its principal goal the preservation and protection of the environmental quality of the City of New Haven. Work includes: Utilize and enforce applicable sections of the State Public Health Code, State Statutes, and Municipal Ordinances Resolve cases of childhood lead poisoning; provide educational outreach activities and assist with distribution of federal lead abatement funds to prevent lead poisoning. Investigate and resolve public health nuisances and infractions of applicable statutes and/or ordinances Assist in preparing for and responding to public health emergencies Lead is a poisonous substance found in most homes in New Haven, especially those built before 1978. In fact, over 80% of New Haven homes are likely to contain lead. When exposed to lead, children or adults can have permanent and severe health problems. PRIMARY FUNCTIONS This is a technical position under the general supervision of the Environmental Health Program Director or designee in the Department of Health to perform investigations, education, and outreach for the prevention of childhood lead poisoning. Work includes inspections for the purpose of determining the presence of lead-based paint and surface coverings and lead in soil, dust and drinking water. Work is performed within the framework of existing laws, ordinances, policies, and regulations. TYPICAL DUTIES AND RESPONSIBILITIES Inspects buildings and dwellings for possible sources of lead poisoning. Conducts investigations, following established protocols, of home environments of children exhibiting the symptoms of blood-lead poisoning. Performs inspections using special instruments to identify surfaces containing lead paint. Collects samples of paint, dust, water, and soil from dwellings and delivers samples to laboratory. Document findings accurately and take photographs or videos, as necessary. Follows procedures to ensure abatement of all areas containing lead paint which may pose a direct hazard to the health of a child. Reinspects dwellings after completion of repairs to ensure compliance with regulations. Confers with individual property owners relevant to service of notices and violations. Fosters a cooperative working relationship with other city and state agencies. Records test data and prepares reports, summaries, or charts that interpret test results. Prepares reports, analyses and recommendations concerning inspection duties and outcomes. May conduct special surveys relating to general environmental health disciplines. May assist in coordinating duties with other concerned agencies. Develops and implements lead abatement plans for properties with confirmed lead hazards, including coordinating with property owners, contractors, and other stakeholders. Assists with providing educational workshops and outreach activities to raise awareness about lead poisoning prevention and provide information on available resources for lead abatement. Performs related work as required. EDUCATION, QUALIFICATIONS & EXPERIENCE Graduation from an accredited four-year college or university with a Bachelors' degree in Public Health, Environmental Science, Occupational Health and Safety, or directly related field, and A minimum of one (1) year of hands-on experience in environmental health inspection and enforcement, Or any equivalent combination of training and experience which provides the following knowledge, abilities and skills: KNOWLEDGE, EXPERIENCE, SKILLS & ABILITIES Considerable knowledge of policies, procedures, methods, and industry standards relating to environmental health. Considerable knowledge of lead poisoning, its effects on children, and long-term health implications. Knowledge of lead hazard identification, assessment, and effective abatement strategies. Considerable knowledge of current issues, research findings, and regulatory decisions regarding childhood lead poisoning. Demonstrated ability to conduct thorough investigations of buildings and dwellings to identify hazards. Competency in utilizing specialized instruments to test for surfaces containing lead paint. Excellent record-keeping skills, including accurate documentation of inspection findings, supported by other media as needed. Ability to prepare detailed written reports, summaries, analyses, recommendations, and charts that interpret test results. Ability to assist with development and implementation of effective lead abatement plans for properties with confirmed lead hazards. Ability to coordinate abatement efforts, including liaising with property owners, contractors, and relevant stakeholders. Strong interpersonal skills for conducting educational workshops and outreach activities aimed at raising awareness about lead poisoning prevention. Ability to use standard Microsoft Office with adeptness and ease, with the ability to learn new emerging technologies. Ability to effectively communicate with co-workers, other City agencies, the public, property owners, and other stakeholders. Ability to remain current on relevant literature, training, research findings, and industry advancements in the field of environmental health. Commitment to ongoing professional development, including attendance at conferences, workshops, and training sessions to stay updated on advancements in lead inspection and abatement techniques. Proven ability to work collaboratively with other city and state agencies involved in environmental health and lead abatement efforts. Ability for self-driven initiative, coupled with strong time management and organizational skills, enabling efficient and independent execution of tasks and responsibilities. Demonstrated ability to work effectively and sensitively in a diverse community, recognizing and respecting cultural differences, and fostering an inclusive environment conducive to achieving common environmental health goals. NECESSARY SPECIAL REQUIREMENTS Must obtain State of Connecticut Lead Inspector Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must obtain State of Connecticut Lead Risk Assessor Certification within 6 months of appointment, and maintain throughout course of employment (Certification training sponsored by the City). Must possess and maintain a valid driver's license throughout the course of employment. This position is aligned with current Core Competencies for Public Health Professionals published by the Council of Linkages between Academia and Public Health Practice. Analytical/Assessment Skills · Working knowledge of assessing individual and community health needs. · Ability to collect reliable data and analyze. Policy Development/Program Planning Skills · Ability to plan, implement and evaluate health education strategies, interventions and programs. · Demonstrate the ability to evaluate the effectiveness of all prevention and promotion programs and outreach efforts. · Good knowledge of the complexity of Connecticut State / City of New Haven laws and regulations, monitor them for changes and have the ability to independently adapt to changes. Communication Skills · Good working knowledge of the appropriate use of technology in health prevention and promotion and ability to independently adapt to the fast-changing landscape of technology. Cultural Competency · Ability to learn about and work with all cultures, ethnicity, social economic statuses being respectful and non-judgmental. Community Dimensions of Practice Skills · Ability to facilitate/coordinate community stakeholder groups. · Ability to present, understand and relay all points of view on issues. Public Health Sciences Skills · Good knowledge of the principles, practices and terminology of public health and chronic disease epidemiology. · Good knowledge of disease prevention and health promotion programs. · Working knowledge of communicable diseases, diagnoses, spread containment and treatment options. Financial Planning and Management Skills · Basic understanding of budgets Leadership and systems Thinking Skills · Demonstrate leadership and management skills. · Ability to independently manage projects while providing supervisory / oversight to diverse groups of community members. SALARY, BARGAINING UNIT & TERMS OF EMPLOYMENT This is a "General Fund," tested position. This position is included in a collective bargaining agreement with Local 884, American Federation of State, County and Municipal Employees. Bargaining agreements available to review HERE. General Funded hires into this class shall not be covered by Social Security but rather the City pension, contributing 9% of salary. The City of New Haven does not sponsor employment visas. All applicants must have current authorization to work in the U.S. without employer-sponsored visa support. Employment is contingent upon the successful completion of: (1) an pre-employment background check, (2) a pre-employment physical examination, including pre-employment drug screening accordance with the City's Drug Free Workplace Policy**, and (3) a 90-day probationary period. Instructions and information on this pre-employment process are included in Conditional Offer of Employment. **Pursuant to the Federal Drug Free Workplace Act of 1988, The City of New Haven has a adopted a Drug Free Workplace Policy. The City of New Haven requires a pre-employment drug test, which includes screening for marijuana. Selection Plan Applications will be reviewed by the Department of Human Resources. Applicants must demonstrate within their submission that they meet the minimum requirements as listed within the job description; failure to do so may result in disqualification. Applicants meeting minimum requirements may be invited to participate in a Civil Service exam process at a later date. It is critical that you complete the application thoroughly, as the information you provide will be used to ascertain if you are eligible to move forward in the selection process. Your application and resume should indicate that you meet the minimum requirements as listed. This information may be used to determine the eligibility list. As such, this job announcement should be considered the exam announcement, and submissions may be evaluated prior to the posted closing date. Information regarding the employment and selection process can be found HERE. Please note that the only method of communication with applicants for this position will be by email. You must provide a valid, working email address and you will need to monitor your email, including spam/junk folders, for correspondence from the New Haven Human Resources Department. We reserve the right to extend an application deadline or close a job posting early to ensure we can attract and identify the best candidate(s) for a position. Conclusion To apply for this opportunity: Complete your User Registration. You are encouraged to save your Applicant Profile for future use. You MUST click on the job posting you are interested in, and click Apply or Apply Online from within that posting. MAKE SURE the job you are applying for is named at the top of the page as you review your application! Review or modify your application for that position Click "Ready to Send App" or the "Send" tab; read page and click the attestation Click "Send to City of New Haven" You will be redirected to "CONFIRMATION OF EMPLOYMENT APPLICATION SUBMISSION" You will also receive an email and text, if a number was provided, confirming your submission If you do not receive this confirmation in the next 24 hours, your application has not been submitted - please contact us at ********************* Please Note, your Profile is NOT an application for an open position. After you create your Applicant Profile, you must still click on a Job Title and complete the application as instructed for each position.

Hamilton Connections is seeking candidates for a quality control inspector operating at a manufacturing company in Danbury, CT. The quality control inspector is responsible for testing, evaluating and documenting the quality of manufactured products. The hours are 3:30 p.m.-12 a.m., Monday-Friday. The job pays $28-$32 an hour, depending on experience. Job Responsibilities: Perform first piece, final and first article inspections of products to inspect for damage and/or defects Use measuring tools like calipers, micrometers and gages to inspect products Measure products for accuracy according to blueprint specifications Maintain accurate documentation and reporting Other duties as assigned Job Requirements: 5 or more years of quality control experience, including first piece, final and first article inspections Experience with precision measuring instruments, including calipers, micrometers, height gages, plug gages and thread gages Able to read blueprints Coordinate Measuring Machines (CMM), vision system and/or optical comparator experience Geometric Dimensioning and Tolerancing (GD&T) experience Familiar with ISO procedures a plus Organized, responsible and self-driven High school diploma or equivalent Able to pass pre-employment screenings

Position Type: Full Time, 40h/week FLSA Classification: Non-Exempt : Roto Frank of America, Inc. is looking for a Maintenance & Quality Technician-2nd Shift to join our team in Chester, CT. Roto North America is a subsidiary of Roto Window and Door Technology, a global leader in window and door hardware, with 18 production plants and more than 30 subsidiaries worldwide. Through its 2 companies, Roto Frank of America, Inc. and Roto Fasco Canada, Inc., Roto North America has been manufacturing and offering a variety of leading North American and European window and door hardware products in the USA and Canada. To learn more about Roto Frank of America please visit us at: Welcome - Roto North America Summary: We are looking for an enthusiastic and passionate individual to join our 2nd shift maintenance and QC team in Chester, CT. The Maintenance and Quality Control Technician will be accountable for the general maintenance and repairs for assigned equipment and be responsible for the quality of produced parts. This position is full time, on site in Chester, CT 3:30pm through 12:00am. There may be occasional overtime as required by business needs. Essential Functions: All aspects of maintenance of the assembly lines and quality control. Inspects and identifies equipment or machines in need of repair. Perform advanced troubleshooting to determine necessary repairs. Order supplies and materials needed for repairs and maintenance. Perform PM (preventative maintenance) on all assembly equipment. Basic milling and lathe work. Ability to use hand tools and power tools. Basic tool repair (grinding, polishing, etc.). Knowledge of general carpentry and repair. Use a pallet jack/forklift. Read and understand engineering drawings (dimensioning and tolerancing). Perform tests according to company quality standards; report results to supervisor for analysis and action steps. Consult with supervisor to determine appropriate recommendations and remedies for questionable products. Perform critical dimension checks on incoming products and raw materials. Use calipers, metric tape, and other measuring devices to determine fine color distinctions. Perform visual quality inspection of incoming finished products. Perform first-piece inspections and checks as noted on production sheets. Create NMRs and control rejected material. Provide support to receiving by identifying material as needed. Computer data entry using SAP system. General housekeeping. Observe all safety requirements. Must wear safety equipment as required. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice. Required Skills & Competencies: Demonstrated ability to offer sound and relevant input, and to contribute and defend ideas during meetings and discussions. Excellent organizational & time management skills. Assumes responsibility without supervision, self-motivated, and proactive. Ability to follow instructions from supervisors Quality focus along with first piece/last piece expertise Work Environment: Production environment work and physical position. Work requires sitting, standing, and/or walking for long periods, moving and examining objects at high and low reach. Must be physically able to climb ladders, bend or crawl into awkward spaces. Able to drive forklift. Dexterity and accuracy needed to operate testing equipment or gauges. Hand-eye coordination. Must be able to lift up to 50 pounds at a time. Minimum Required Education: High School diploma or equivalent required On-the-job training offered Valid Driver License Required Required Work Experience: Related experience of 2 years preferred Roto offers an attractive salary and benefits package: 401(k) 401(k) matching Employee assistance program Employee discount program Medical insurance Dental insurance Vision insurance Flexible spending account Health savings account Life insurance Short Term Disability insurance Voluntary Long Term Disability insurance Paid time off Paid Holidays Pay Range: The Pay Range for this position is $27.00 - 29.00 hourly. The actual pay range will depend on varying circumstances and individualized factors, such as job-related knowledge, skills, experience, and other objective business considerations. The pay range listed here has been provided to comply with local regulations and represents a potential pay range for this role.

As an essential business, Anomatic produces innovative and sustainable packaging for today's biggest brands. By leveraging over five decades of manufacturing expertise and employing an extensive technologies portfolio, we design, manufacture, and finish incomparable stock and customized solutions for numerous markets. Position: Quality Control Inspector Location: Naugatuck, CT Department: Quality Shift: First Shift 6am - 2:30pm JOB SUMMARY QC Stamping Inspector's primary function is the quality evaluation through gauging and inspection to validate the acceptability of stamping production, the capture of nonconforming product and the documenting of that acceptability. Evaluation is conducted as specified through provided gauging and inspection standards. QC Stamping inspectors also provide general “Quality” training, support and guidance to Stamping Department Personnel ESSENTIAL FUNCTIONS Gather samples from each stamping press twice per shift, performs visual and dimensional inspection, recording dimensional results in Mongoose (stamping inspection system of record) as well as on the Stamping Inspection Shift Report (excel file) Conduct proper defect containment, inform the Press Operators of any defects identified, as well as Set-Up personnel, Toolmakers, Tooling Engineer and/or Stamping Dept. Manager as applicable. Record actions (i.e. scrap, hold, etc..) on the Stamping Inspection Shift Report Receive QC LAB (also receiving inspection group) anodizing report, as well as supporting defect samples and address quality issues specified in their report Conduct “outgoing” (from stamping) skid audits for product from presses identified by the Stamping Q.E. Report data as specified Provided training to Stamping Department personnel as a qualified TWI trainer (Includes but not limited to developing TWI instructional break downs, providing individual training for TWI, documenting & tracking provided training, auditing TWI tasks as indicated by management) For Start-up ensure that proper documentation and standards are at each press (gauge plan, part drawing, skid tags, skid labels, and standard boards) Perform “Start-Up” inspection using applicable gauge plan, applicable standard boards and past start-up retains. Record all results on Stamping Inspection Report Maintain “Start-Up Retains Bank” located in the Toolmaker work area. As startups are approved, one raw and one anodized sample from the Start-up will be marked with the approval date and placed in the appropriate bin to be referenced on future start ups At the beginning of each shift Stamping Q.C. Inspectors will review each press and ensure correct labels, gauge plan, part drawing and correct skid tags are being used Keep Department QC Stations and/or QC Work Areas orderly at all times. Double check to make sure proper prints, gauging and inspection plans are at each press and in the QC areas as assigned. Inspect and report inspection results for New Product Development (NPD) by completing the applicable Stamping Quality portion of the First Piece Submission Routing Form Any other duties that may be assigned, including data entry, QC checks on discrepant materials, production and quality reporting, filing and maintaining paperwork, etc. Assist with any other duties and projects as required QUALIFICATIONS Must be proficient in gauging methods and procedures. Must maintain an excellent attendance record. Must be able to work independently without constant supervision and be able to work overtime as needed to cover absences. Must be proficient in the use of Microsoft Office Applications (Outlook, Excel, Word and Power Point at a minimum). Must have basic knowledge of or be trainable on Syteline. Must be able to wear prescribed safety equipment and promote a safe work environment. #1Anomatic

Job Purpose: Maintains quality standards and records quality results. Performs production Inspection. Understands and complies with SPI's Documents inspection results by completing reports and logs; summarizing re-work and waste; and inputting data into the quality database. Maintains a safe and healthy work environment by following standards and procedures; complying with legal regulations. Skills/Qualifications: 1-5 years' experience as an inspector in Aerospace Analyzing Information, Manufacturing Methods, and Procedures. Knowledge of GD&T is beneficial Strong verbal and interpersonal skills, analytical, and shop math skills It is the policy of this company to extend equal employment opportunities to all qualified employees without regard to race, color, religion, creed, marital status, learning disability, sexual orientation, national origin, sex, age, history of mental illness, mental retardation or physical, unless such disability prevents performance of the work involved. This policy applies to all phases of employment including, but not limited to, recruitment, hiring, placement, upgrading and promotion, transfer, layoff and recall, termination, selection for company sponsored training programs, rates of pay and other forms of compensation, use of facilities, and participation in all company sponsored activities.

Insight Global is seeking a skilled Quality Control Inspector for a full-time direct hire opportunity with a Bio-Medical Device client located in Guilford, CT. The company is a long-standing family founded and led business known for manufacturing high quality, reliable, American-made repiratory care equipment. This position would work on a small team reporting to the Quality Engineer. The goal of this position to understand all processes related to quality and inspection, perform precise and reliable quality inspections, and grow with the company. Training will be hands on and tailored to the individual but previous experience with a variety of precision measuring tools will ensure a quicker ramp up for success. Responsibilities: - Perform detailed quality controlk inspections, checks and tests for receipt and manufacturing of products - Inspect material, parts and products at different stages of production, including incoming, in-process and final of machined, molded and fabricated components - Verify parts and measurements against drawings and blueprints, ensuring specifications and tolerances are met using precision measuring tools (calipers, micrometers, CMM, guages, etc) - Inspect subassemblies and finished devices for workmanship and conformance to requirements - Document inspection results accurately and in compliance with company procedures - Coordinate with vendors as needed to initiate debit memos, returns, and request RMAs - Assist team members with troubleshooting as needed We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - 3-5+ years of experience in a Quality Inspector or similar role - Proficient with a variety of measurement tools including dial calipers, thread ring and plug guages, guage pins, height guages, micrometers, coordinate measuring machine (CMM), optical comparators and/or other inspection equipment - Experience measuring parts against blueprints or mechanical drawings - Reliable and detail oriented - Computer literate with MS Office - High School Diploma or GED Physical Requirements: - Able to use small fixtures - Able to lift up to 50 lbs and raise to a hight of 30" - Able to sit in a stationary position for prolonged periods of time - Experience with CMM (Coordinate Measuring Machine) highly preferred - Industry experience within medical devices or similar - Experience with ERP or QMS Systems - Technical training or Associates Degree in mechanical, manufacturing, or quality discipline - Understanding of ISO 13485, FDA QSR or other regulatory requirements and quality systems

Our QC Inspector supports Mativ's Sustainable & Adhesive Solutions Function. This individual will perform inspections and tests throughout the manufacturing process to ensure compliance with specifications under the supervision of Quality Engineering. The shift schedule is 6pm-6am. responsibilities: * Performs all auditing and testing of in-process, and finished goods to include Retain, Coat Weight, Cure and any additional testing as required by the Product Requirement Sheet, (PRS) or Tech 11. * Record and enter test results into the Scapa ERP System * Perform all manufacturing audits prior to production and at required intervals. * Maintain and organize product master files. * Coordinate shop floor QC testing based on daily and weekly production schedule. * Issue non-conformance report for any tested material that is out of specification. * Perform visual inspections of materials being coated and slit/converted and immediately inform coating/converting operators of any defects. * Interfaces with Quality Assurance and Production scheduling in the preparation and reviewing of slitting specifications. * Evaluates product quality based on product specifications and makes appropriate usage decisions. * Responsible for setting up test equipment. * Maintaining inventory of QC lab MRO items * Responsible for maintaining all related files and documents according to Good Documentation Practice, (GDP). * Assists in training new QA Inspectors and manufacturing personnel. * Participates as a team member in continuous improvement events. * Maintain QC test equipment and calibration status. * Assists quality engineers and quality technicians with gage R&R, and other validation activities. * Follows safety rules and keeps the work area in a clean and orderly manner. * Complies with company attendance policies. * Issue Supplier Complaints in the ICS, (Internal Complaint System), for nonconforming raw material. qualifications: Required * Minimum of 2 years' experience in Q. A. or Q. C. manufacturing environment. * High School diploma required, bachelor's degree highly preferred. * Familiar with basic measurements, test equipment and basic math skills. * Medical device industry experience preferred. * Ability to communicate and work within a team environment. * Fluency in English both verbal and written Preferred * 2 years' experience in Quality Assurance or Quality Control. * 2 years' experience in medical device or industrial manufacturing. * Associate degree in chemistry, physical sciences, or tech field. Relevant job experience may be considered in place of a 2-year degree. * Able to collaborate and work well with others. Position Demands Conditions are that of a manufacturing environment: * Air Temperatures can range from cold to hot. * The atmosphere may contain dust, fumes, and odors. * May include mechanical, electrical, chemical, explosive and radiation hazards. Employees are required to wear Personal Protective Equipment (PPE) including: * Safety shoes (steel toe or composite toe) * Safety Glasses * Bump Caps * Protective Gloves, when performing certain tasks * Hearing Protection, when required. * Other personal protective equipment as required for certain tasks. While performing the duties of this job the employee must meet the physical demands: * Be able to lift a minimum of 50 pounds. * Be able to work 12-hour shifts. * Perform repetitive tasks. * Routinely stand, sit, hear, walk, and talk. * Reach, climb, bend, kneel, crouch, twist, and balance, sometimes in awkward or tight spaces. * Have good close vision, depth perception, and the ability to focus. WHAT WE OFFER At Mativ, our benefits reflect how much we value and care for each other. We know that employees and their families have unique needs, so our comprehensive benefits offer flexibility, quality, and affordability. Here are just a few of the ways we support your well-being and that of your loved ones: * Medical, dental and vision insurance * Consumer-Driven Health Plan (CDHP) * Preferred Provider Organization (PPO) * Exclusive Provider Organization (EPO) * Company-paid basic life insurance and Additional voluntary life coverage * Paid vacation and competitive personal time off * 401(k) savings plan with company match * Employee assistance programs - available 24/7 to you and your family * Wellness and Work Life Support - career development and educational assistance ABOUT MATIV Mativ Holdings, Inc. is a global leader in specialty materials headquartered in Alpharetta, Georgia. The company connects, protects, and purifies the world every day through a wide range of critical components and engineered solutions that solve our customers' most complex challenges. We manufacture on three continents and generate sales in nearly 100 countries through our family of business-to-business and consumer product brands. The company's two segments, Filtration & Advanced Materials and Sustainable & Adhesive Solutions, target premium applications across diversified and growing end-markets, from filtration to healthcare to sustainable packaging and more. Our broad portfolio of technologies combines polymers, fibers, and resins to optimize the performance of our customers' products across multiple stages of the value chain. Our leading positions are a testament to our best-in-class global manufacturing, supply chain, and materials science capabilities. We drive innovation and enhance performance, finding potential in the impossible. Mativ and its subsidiaries are Equal Opportunity Employers. Qualified applicants will be considered without regard to their race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Job Description Quality Control Inspector - 1st Shift

Enjet Aero machines and fabricates complex jet engine parts, components and assemblies for leading OEMs in the commercial, defense and general aviation sectors. Our goal is to be regarded as an irreplaceable resource by our customers. The only way for a company to meet such a goal is to consistently meet production deadlines and expectations. Position Description: Quality Inspector will perform in-process and 1st article inspections, evaluate part to print specifications and understand the inspection methods used for inspection and support the manufacturing process and personnel, while adhering to the Quality Policy, AS 9100 requirements. Position reports to the Quality Manager and takes daily direction from the Inspection Supervisor. You will receive a 20% night shift premium. Essential Responsibilities: Strong blueprint and Geometric Dimensioning & Tolerance (GD&T) comprehension Able to use inspection tools, such as micrometer, indicators, comparator, etc Detailed to complete all paperwork, as required, including inspection reports Able to make mold casts to check ID dimensions Ability to identify dimensional and visual defects Able to understand and implement customer specifications and requirements Accuracy and attention to detail is highly important Experienced with completing 1st article inspections, in-process inspections and final inspections Knowledge of aerospace specifications and requirements preferred. Perform other duties as required Qualifications: Proficient at reading blueprints Knowledge of dimensional symbols Ability to identify visual defects Ability to read micrometers, calipers and comparator Knowledge of measuring equipment Ability to work together for team effort Team oriented Organized and detail oriented Adherence to document control requirements Knowledge of various inspection reports General computer knowledge Ability to work without supervision Benefits: Enjet offers a comprehensive benefits package to full-time employees including paid time off, health insurance, dental insurance, vision insurance, paid holidays, a 401K retirement plan, disability insurance, and more. As an EOE/AA employer, Enjet Aero will not discriminate in its employment practices due to an applicant's race, color, religious creed, national origin, ancestry, sex, age, veteran status, marital status or physical challenges.

Job Title: Inspector Quality Control Department: Quality Control Reports To: Chief Inspector FLSA Status: Hourly Non-Exempt Direct Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing detailed inspections on aeroderivative Gas Turbine engines and related components using overhaul manuals, standard practice manuals and WGPW established procedures. Strong-dimensional skills are required and previous experience in the aerospace industry is a strong plus. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities Review job orders, customer specifications and build standards prior to inspecting parts. Perform initial, in-process and final inspection of industrial engine parts and modules using a variety of inspection tools per the inspection procedures manual, Overhaul manual (OHM) and other related documents. Determines condition of parts and/or modules, identifies requirements and initiates appropriate processes. Review parts to ensure that all required fits and clearances are taken, recorded and are within specified limits. Interact with Component Repair/Vendor Administration concerning in-process inspections, repairs and/or any problems with work instructions. Work independently, referring only unusual conditions or circumstances to engineering. Ensure that customer work instructions are carried out Maintain a safe and clean work area and adhere to all housekeeping requirements. Follow all safety procedures and rules and properly wear all safety protective equipment as required. Read and interpret complex drawings and blueprints. Conduct oneself in a businesslike manner and in the spirit of teamwork. Maintain inspection and repair documentation. Perform special projects as assigned by management. May be required to work at remote locations due to fluctuating workloads. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Must possess a good working knowledge of jet engine component repair procedures required to determine proper repair actions. Aptitude for comprehending and interpreting documents encompassing safety rules, operating and maintenance instructions, and procedure manuals. Ability to interpret and apply a variety of instructions furnished in written, oral, diagram or schedule form. Ability to calculate figures such as percentages, ratios, area, circumference, and volume. Ability to apply the concepts of math as it relates to engine repairs, fits and clearances, and running positions. Capacity to solve unusual problems and deal with a variety of concrete variables in situations where only limited standardization exists. Good working knowledge of Microsoft Office applications. Excellent mechanical skills, a high level of manual dexterity including hand-eye coordination and the ability to accurately use precision measuring tools such as micrometers, calipers, and dial indicators. Must be able to read, interpret, document, and use manufacturer's technical manuals, service bulletins, illustrated parts catalogs, assembly drawings, AOS sheets and WGPW assembly records. Able to use manufacturer's special tooling and lift and turn equipment effectively and safely. EDUCATION and/or EXPERIENCE Two-year certificate or degree from college, technical school or equivalent plus additional broad specialized training in an aviation or technical school, military training or greater than ten years related experience; or equivalent combination of education and experience. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to stand, and use hands to finger, handle or feel objects, tools, and controls. The employee is occasionally required to walk; sit; reach with hands and arms; climb or balance; stoop, kneel, crouch or crawl; and talk or hear. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may occasionally work in high places and in outside weather conditions or be exposed to moving mechanical parts, fumes, airborne particles, solvents, and oils. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job Title: Inspector Quality Control- 1st Article Inspector Department: MPA Warehouse Reports To: Quality Control Manager FLSA Status: Hourly Non-Exempt In- Direct Position Date: 11/17/25 Work Hours: 7:00AM - 3:30PM SUMMARY Responsible for performing detailed inspections on New GG8 spare parts and Customer owner tooling using overhaul manuals, standard practice manuals and WGPW established procedures. Strong-dimensional skills, drawing interpretation are required and previous experience in the aerospace industry is a strong plus. ESSENTIAL DUTIES AND RESPONSIBILITIES The position includes but is not limited to the following essential duties and responsibilities. Maintains a safe and clean work area and adheres to all housekeeping requirements. Follows all safety procedures and rules and properly wears all safety protective equipment as required. Able to read and understand Pratt & Whitney engine manuals, blue prints, service bulletins, illustrated parts catalogs, standard practice, and spare parts bulletins. Able to understand GD&T and drawing interpretation. Able to process quality transactions in ERP system, including non-conformities. Able to use basic shop measuring equipment including Micrometers, Vernier and Dial Calipers, Plunge and Test Indicators, Dial Bore Gages, Snap Gages, profilometer, and PI-Tapes. Working knowledge of a Window's based computer system. Works overtime as required. Conducts oneself in a business-like manner and in the spirit of teamwork. Receiving Inspection: Visual and dimensional inspection of various gas generators using MPA overhaul manuals and WGPW technical data. May be required to work at other WGPW locations or departments due to fluctuating workloads. Able to approve AS9102 First Article Inspection, including certification package and Supplier/Vendor inspection reports. QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Experience with job audits, including internal ISO9001 audits. Ability to calculate figures such as ratios, area, circumference, and volume. Ability to apply the basic concepts of algebra, geometry, trigonometry, and shop math as they relate to inspection or trouble shooting. EDUCATION and/or EXPERIENCE Equivalent to high school plus additional broad specialized training in the Quality Control field or technical school, military training and one to three years related experience; or equivalent combination of education and experience. PHYSICAL & ENVIRONMENTAL DEMANDS While performing the duties of this job, the employee is regularly required to sit, stand, and use hands to handle parts. The employee must occasionally lift and move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. While performing the duties of this job, the employee may occasionally work with chemicals while receiving consumable materials in for use on parts within the shop. Possible use of alcohol and/or acetone for light cleanings of oils or dirt as parts are prepared for inspection. WGPW Industrial Turbine Services is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, disability, genetic information, pregnancy, citizenship, marital status, sex/gender, sexual preference/ orientation, gender identity, age, veteran status, national origin, or any other status protected by law or regulation.

Job DescriptionQuality Control Inspector (Manufacturing - Rubber Products) A well-established rubber manufacturing company in the Middletown area is seeking an experienced Quality Control Inspector to join their team on 1st shift. This is a contract-to-hire opportunity for someone who enjoys hands-on inspection work and takes pride in maintaining high-quality manufacturing standards. Pay Rate: $20 - $22/hour (based on experience) 1st shift, contract to hire What You'll Do Perform in-process and final inspections of rubber parts and finished products Conduct visual and dimensional inspections using calipers, micrometers, gauges, and other hand tools Ensure products meet quality standards, specifications, and customer requirements Identify, document, and report defects and nonconforming material Work closely with production teams to address and resolve quality issues Complete inspection records and basic quality documentation Support continuous improvement, safety, and housekeeping standards on the manufacturing floor What We're Looking For 2+ years of Quality Control or Inspection experience in a manufacturing environment Experience inspecting rubber, plastics, molded, or similar manufactured products preferred Ability to read and understand specifications, work instructions, or drawings Comfortable using measuring tools such as calipers, micrometers, and gauges Strong attention to detail and consistency Basic computer skills for documentation Dependable attendance and a positive, team-oriented attitude Nice to Have (Not Required) Experience with ISO or internal quality systems Familiarity with defect analysis or root cause identification Background in rubber manufacturing, molding, or extrusion Why This Opportunity? 1st shift schedule with steady hours Contract-to-hire potential Hands-on role where quality truly matters Competitive pay based on experience How to ApplyIf you have quality inspection experience and are looking for a long-term opportunity in manufacturing, apply today. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws. #R1

Quality Control Inspector (Manufacturing - Rubber Products) A well-established rubber manufacturing company in the Middletown area is seeking an experienced Quality Control Inspector to join their team on 1st shift. This is a contract-to-hire opportunity for someone who enjoys hands-on inspection work and takes pride in maintaining high-quality manufacturing standards. Pay Rate: $20 - $22/hour (based on experience) 1st shift, contract to hire What You'll Do Perform in-process and final inspections of rubber parts and finished products Conduct visual and dimensional inspections using calipers, micrometers, gauges, and other hand tools Ensure products meet quality standards, specifications, and customer requirements Identify, document, and report defects and nonconforming material Work closely with production teams to address and resolve quality issues Complete inspection records and basic quality documentation Support continuous improvement, safety, and housekeeping standards on the manufacturing floor What We're Looking For 2+ years of Quality Control or Inspection experience in a manufacturing environment Experience inspecting rubber, plastics, molded, or similar manufactured products preferred Ability to read and understand specifications, work instructions, or drawings Comfortable using measuring tools such as calipers, micrometers, and gauges Strong attention to detail and consistency Basic computer skills for documentation Dependable attendance and a positive, team-oriented attitude Nice to Have (Not Required) Experience with ISO or internal quality systems Familiarity with defect analysis or root cause identification Background in rubber manufacturing, molding, or extrusion Why This Opportunity? 1st shift schedule with steady hours Contract-to-hire potential Hands-on role where quality truly matters Competitive pay based on experience How to ApplyIf you have quality inspection experience and are looking for a long-term opportunity in manufacturing, apply today. Qualified candidates will be contacted to discuss next steps. A.R. Mazzotta is an equal opportunity employer. It is the policy of A.R. Mazzotta to employ, recruit, hire, train and promote individuals without regard to race, color, religious creed, sex, national origin, age, marital status, present or past history of mental disability, intellectual disability, learning disability, or physical disability, religion, political affiliation or belief, pregnancy, ancestry, veteran status, sexual orientation, gender identity or expression or any other status protected by federal, state, or local laws. #R1

Hourly : 22.72 What do you get when you bring together a team of bright individuals and place them into an environment where “work” means making a difference in the lives of people across the globe? You get Sciolex Corporation, a fast-growing defense contractor focused on providing the U.S. Government a level of service that surpasses the epitome of excellence. Our core services include systems engineering technical advice, technical support, and administrative assistance. From our humble beginning as a small Service Disabled, Veteran Owned Small Business in Chantilly, VA, Sciolex Corporation is now the home for over 1,000 employees across the U.S. Over the past 19 years, Sciolex Corporation has constructed an environment that celebrates diversity and encourages a positive work/life balance, all while supporting government missions that our employees are proud to be a part of. When you work for Sciolex Corporation, you are working for a stable company that values you and is committed to ensuring you receive the utmost employee care. Responsibilities The Quality Control Inspector (QCI) supports the overall mission of the U.S. Citizenship and Immigration Services (USCIS) by facilitating the operations of a local Field Office. As a QCI, your responsibilities would include: Verifies compliance with work standards, SOPs, ROH, and other requirements documents, Pays particular attention to the timeliness and accuracy of work performed, Screens documents to determine accuracy of data contained in them and determines which need corrective action, Keeps various logs and uses random sampling to evaluate process efficiency, accuracy, and timeliness, Responsible for recognizing problems that might invalidate samples, investigating complaints, reviewing violations found by USCIS personnel, and preparing reports of findings and actions needed or taken, Recommends changes that will improve contract performance, Other duties as assigned. Qualifications & Physical Requirements High school diploma or equivalent Must be able to obtain a Public Trust/Suitability Clearance under the Department of Homeland Security from the United States Citizenship and Immigration Services Ability to read and understand proficiently in English Ability to lift and carry up to 45 lbs. or more in a physical environment Ability to perform tasks while bending, stooping, climbing, and reaching At Sciolex Corporation, our top priorities and most valuable resources are our employees, which is why we offer a competitive total compensation package. We are a proud Equal Opportunity Employer (EOE) who celebrates diversity in and out of our organization. Come see where your opportunities for success can flourish. NOTICE: Sciolex Corporation NEVER asks job applicants to issue any payment, service fees, or banking information to Sciolex Corporation or its recruiters as part of our application process. Before providing any personal information to outside parties, verify that the job you are applying for appears on our Careers site.