Quality control inspector jobs in Smyrna, GA

About Us Apollo is a Mission-Critical Infrastructure Engineering, Construction, Commissioning, and Operations Support Services Company. We serve mission-critical industries globally with commissioning, emergency response, operations support, and owner's representative services. Apollo is currently executing projects in multiple states in the United States, in Canada and Brazil. Since our inception, we have built a commissioning firm based on trust, one relationship at a time. We hire the best people who can handle critical systems, love challenges, and thrive in a dynamic environment. We focus on understanding each client's needs and are relentless in meeting them. Job Description The Data Center Construction QAQC Co-Op Engineer (CxE-C) provides construction management, quality assurance and quality control support during the delivery of mission-critical data center facilities. They also participate in the supply chain coordination, inspection and validation of mechanical and electrical components, ensuring that delivered components meet the required specifications before installation and commissioning. The QAQC-C partners with senior team members, project managers, construction contractors, equipment vendors, and client staff to monitor and ensure adherence to project specifications, quality standards and timelines throughout the construction process. The QAQC-C provides construction support as part of Apollo's onsite, client-facing teams. Thus, this role may involve approximately 75% or more travel to various client locations. Education Relevant coursework towards a bachelor's or associate degree in engineering, construction management, supply chain & logistics, or a related discipline OR One year of experience in the supply chain coordination, inspection, validation, and quality control of mechanical and/or electrical systems in a construction environment. Key Responsibilities Support the review of construction plans and design specifications to help identify quality and compliance requirements. Collaborate with project managers and suppliers to ensure timely delivery and installation of electrical and mechanical components. Work with the QAQC team to identify and address potential risks or areas for improvement during project execution. Help prepare and maintain detailed documentation of inspections, tests, and quality reports for project teams. Conduct pre-installation inspections under the guidance of senior QAQC team members. Achieve certification for NFPA70E, OSHA 30, and other training as required. Travel to other project locations as required. Perform other duties as assigned. Physical Demands The following physical demands must be met to successfully perform the essential functions of this role. Reasonable accommodations may be made to enable individuals with disabilities to perform these functions: Frequently manipulating, moving, or grasping small parts, devices, or tools. Frequently required to remain in a stationary position. Frequently moving through office areas, critical facilities and other environments, including tight and confined spaces. Exposure to low/high temperatures and outdoor elements such as precipitation and wind. Working and walking on different types of terrain on active construction sites (e.g., concrete flooring, gravel, unpaved roads). Frequently ascending and descending stairs and ladders to access equipment. Frequently positioning oneself under or over equipment. Frequently moving equipment weighing up to 50 pounds. Qualifications Basic knowledge of mechanical and electrical systems in construction Strong communication and collaboration skills to work with cross-functional teams, including project managers and contractors Skilled at using MS Office tools. Ability to analyze and prepare reports and technical documents. Ability to work under pressure and meet critical deadlines. Must be detail oriented. Prerequisites for Employment: Successful Background Check including pre-employment drug screening US citizens, permanent residents or any candidate with eligibility to work in the US Graduating in May 2027 or later Apollo challenges the brightest, most talented, and driven individuals in the industry by providing an environment that embraces initiative, diversity, and achievement. We are an Equal Employment Opportunity, Affirmative Action employer supporting women, minorities, veterans and people with disabilities. We participate in the Department of Homeland Security E-Verify program.

TempToFT Testing Solder Paste batches in the lab. Will also be handling packing slips, BOL and sometimes dealing with shipping companies. Must have Microsoft Office experience, Excel, Word. Looking for someone that will be punctual in attendance and deadlines. Must be a team player. 1965 Evergreen Blvd. , Suite 400, Duluth, GA 30096, United States of America

3M is seeking Quality Inspector candidates in Clarkston, Georgia. Full-time 2nd Shift & 3rd Shifts available * Pay starting: $22.52 per hour * New hires start with 3 weeks paid vacation + 12 paid holidays * Health, vision and dental start day one * Employee stock discount * 401K Match of 5% Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role As a Quality Inspector, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: * Inspecting product to determine compliance with order specifications, customer requirements, and company's quality control system * Assuring compliance with legal requirements, and shipping and packing facilities for conformity to specified standards * Excellent visual skills to detect minute non-conformances (ex: cracks, voids, tool marks, etc.) * Operate small hand tools and process equipment with dexterity * Work with precision tools and equipment using good judgment to prevent damage to equipment, to understand equipment operation, and to be efficient Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: * Possess a High School Diploma / GED or higher (completed prior to start) * Previous quality inspection experience in a private, public, government, or military environment Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as part of the selection process. Additional qualifications that could help you succeed even further in this role include: * Experience in an aerospace or defense related industry * Security Clearance Work location: Clarkston, GA Relocation Assistance: Not Authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. The starting rate of pay for this position is $22.52. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** Applicable to US Applicants Only:The starting rate of pay for this position is $19.30, with the potential to reach $24.67 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Job Description Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONSTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus. Daily - 8:00AM-5:00PM - Monday through Friday

Job Title: Car Wash Quality Control Inspector About Us: California Hand Wash is a full-service hand car wash, featuring a conveyor driven tunnel hand wash, ceramic coating services and professional detail center. California Hand Wash is dedicated to delivering exceptional customer experiences while maintaining the highest standards of safety and professionalism. Job Overview: We are seeking a diligent and detail-oriented individual to join our team as a Car Wash Quality Control Inspector. In this role, you will be responsible for ensuring that all vehicles leaving our car wash meet our high standards of cleanliness and quality. The ideal candidate will possess a keen eye for detail, excellent communication skills, and a commitment to delivering exceptional service to our customers. Key Responsibilities: Conduct thorough inspections of vehicles after they undergo the hand wash process. Evaluate the cleanliness and condition of vehicles, including both interior and exterior surfaces. Identify any areas that require additional attention or rework, such as missed spots or streaks and communicate them to the linen supervisor or manager for correction. Provide feedback and guidance to finishing staff to help improve overall performance and quality. Call customers over the PA system when their vehicle is fully inspected and ready to be delivered. Qualifications and Skills: Excellent attention to detail and the ability to identify even minor imperfections. Strong organizational skills and the ability to prioritize tasks effectively. Effective communication skills, both verbal and written, with the ability to provide clear and constructive feedback. Ability to work independently and make decisions in a fast-paced environment. Flexibility to work varying shifts, including evenings, weekends, and holidays, as needed. Knowledge of car wash processes is a plus.

Job Description Quality Technician/Inspector is responsible for conducting testing procedures during manufacturing processes to ensure that products comply with quality standards and meet company requirements. This position uses metrology concepts, problem solving, and continuous improvement techniques to provide functional support for new product development and product line support. Responsibilities Perform incoming/receiving, in-process and final inspections of all products per established SOP requirements and specifications. Perform inspections using an automated Micro-Vu measurement system. Conduct analyses of raw materials, in-process materials, finished goods and environmental samples, checking for quality and that they meet necessary specifications. Create, organize, maintain, and secure inspection records to provide for good documentation practices and efficient retrieval. Assist in preparing and developing inspection plan instructions and procedures. Generate nonconforming reports (NCRs) and facilitate processing them in a timely manner. Participate in internal audits as requested. Perform other duties as assigned by Quality Management. Qualifications High School diploma or equivalent certification; or equivalent experience. At least 2+ years of experience inspecting and testing components and fabricated parts, sub-assemblies, product assemblies, and finished devices; preferably in the medical device or a heavily regulated industry. Proficiency using microscopes, vision system (Micro-Vu experience preferred), and conventional handheld inspection tools (e.g., calipers, micrometers, gage blocks, etc.), tensile testers (Instron type), torque testers, and other related tools. Proficiency in Microsoft Word, Excel, and Outlook. Ability to analyze and interpret technical information. High level of personal and professional integrity and trustworthiness with strong work ethic and the ability to work independently with minimal direction. Assertive, take-charge, results orientated, positive “can do” attitude and a sense of urgency to get things done. Highly detailed orientated with a critical degree of accuracy regarding data entry and analysis. Ability to collect and analyze information, problem-solve, and make decisions. Strong written and oral communication skills (timely, clear, concise, accurate, conclusive, influential, targeted to audience) Strong collaboration and influence skills (build relationships, leverage others, align and work towards shared outcome-based goals, understand others' needs, negotiate for win-win, own the whole) ASQ, CQT, CQI Certification preferred, but not required. Must be legally authorized to work in the United States Must be willing to submit to a pre-employment background check and drug screen

Responsible for following defined Quality procedures for incoming\/outgoing inspections, ensuring only acceptable raw materials and products are approved and accepted during manufacturing processes. Shift: Monday \- Thursday 2:15 PM \-12:45 AM, after 1 month it will change to Monday \- Friday 2PM \- 10PM. Compensation: $23.00\/HR with $1\/HR premium ESSENTIAL DUTIES Determine acceptability of material by comparing test\/inspection results to specifications. Perform incoming\/outgoing inspection of materials and components following quality of work instructions and documents. Perform final inspections and signoffs according to quality work instructions and documents. Demonstrate knowledge and use of all inspection tools. Complete and maintain written records, record files and computer databases as required by SOPs, Work Instructions and Test Procedures. Interpret drawings, specifications, test methods, control plans and sampling plans as necessary. Clean and maintain work areas, gauges, equipment and instrumentation as scheduled or required. Communicate & cooperate with fellow employees to maintain quality, operational efficiency & safety. Inspect incoming material for proper part number and quantities. Report non conformance condition (either product or process) to Plant Quality Manager and actively seek ways to improve either individually or as part of a team. Perform other related duties as required. Requirements REQUIRED QUALIFICATIONS MINIMUM KNOWLEDGE AND SKILLS REQUIRED At least 2 \- 4 years direct QC inspection experience required. Working knowledge of PC, good math skills and excellent written and oral communication skills necessary. Mechanical "hands\-on" experience. Experience with ISO 9001:2015 a plus. Able to read, interpret and follow SOPs, instructions, specifications AutoCAD drawings and reference materials. Ability to read, interpret and communicate technical information. Able to operate Quality specific equipment and instrumentation necessary to fulfill job responsibilities. ADDITIONAL REQUIREMENTS PREFERRED OR DESIRED QUALIFICATIONS High school diploma or equivalent. A 2\-year degree in Technology is desirable. Able to work independently and as part of a team. Effective communication skills, written and verbal. FICSAL RESPONSIBILITY Provide monetary figures for the areas most significantly impacted by this position. Items included may be revenues, sales, budgets, purchases, etc. · Company\/Group\/Unit Sales: N\/A · Controllable Budget: N\/A (including payroll) SUPERVISORY RESPONSIBILITY Indicate the number and type of employees supervised, level of hire\/fire authority or recommendations. · Number Supervised: Direct\- 0 Indirect\- 0 WORKING CONDITIONS Able to handle heavy, bulky items manually Occasional weekend availability Industrial Plant setting with exposure to temperature fluctuations (hot during summer months and cold during winter months) Required to wear personal protective equipment as appropriate to task and environment Consistently dusty and noisy work environment PHYSICAL DEMANDS · Must be able lift up to 50lbs consistently · Must be able to work 8\-12 hour shifts and work weekends when necessary · Must be able to walk a minimum of 2 miles per day Job Type: Full\-time Salary: $23.00 per hour Benefits Benefits: 401(k) 401(k) matching Dental insurance Employee assistance program Health insurance Paid time off Vision insurance Application Link: https:\/\/joinus.saint\-gobain.com\/en\/usa\/tpr\/p\/26000\/183466\/quality\-inspector "}}],"is Mobile":false,"iframe":"true","job Type":"Full time","apply Name":"Apply Now","zsoid":"682167578","FontFamily":"Arial, Helvetica, sans\-serif","job OtherDetails":[{"field Label":"Department Name","uitype":4,"value":"Saint\-Gobain: Julie Vockrodt"},{"field Label":"Industry","uitype":2,"value":"Manufacturing"},{"field Label":"City","uitype":1,"value":"Norcross"},{"field Label":"State\/Province","uitype":1,"value":"Georgia"},{"field Label":"Zip\/Postal Code","uitype":1,"value":"30003"}],"header Name":"QUALITY INSPECTOR","widget Id":"**********00072311","is JobBoard":"false","user Id":"**********00235003","attach Arr":[],"custom Template":"3","is CandidateLoginEnabled":true,"job Id":"**********16638361","FontSize":"15","location":"Norcross","embedsource":"CareerSite","logo Id":"hs654aa3cf36a6b354ae38f8148a2cfbb79b2"}

Full-time Description NO AGENCIES PLEASE Job Type: Full-time - Non-Exempt Quality Control Inspector Reports to: Quality Control Supervisor Mission: To be a trusted partner who drives better business results for our healthcare customers. Together we grow. Position Overview: We are seeking a detail-oriented and experienced Quality Control (QC) Inspector to join our team in Norcross, Georgia. The QC Inspector will be responsible for performing CM (Component Manufacturing) inspections, product documentation, ensuring compliance, and performing a variety of inspections to maintain the highest quality standards for our medical devices. This position focuses on inspecting components and finished materials. Performs receiving duties, quality control inspections, release, and shipping activities all according to quality procedures. The Quality Control Inspector assists in maintaining the Quality Management system of GlobalMed Logistix, a leader in medical device distribution. Maintains rigorous quality mindset and advocates strict adherence to compliance practices within the facility. Possesses skills and understanding of Quality Control in the medical device industry and current Good Manufacturing Practice (GMP). Responsibilities: · Responsible for performing accurate component product inspections and finished goods. · Responsible for maintaining inspection documentation, including scanning, and filing completed records. · Responsible for initiating non-conformance reports and ensuring non-conforming material is processed in accordance with the disposition. May assist with nonconformance investigations as needed. · Testing materials and products to ensure they meet standards. They may use calipers, gauges, or micrometers to measure products. · Ensure compliance with Quality System SOPs, understand work instructions, how to read drawings, Good Manufacturing Practices (GMP), and Good Documentation Practices (GDP). · Responsible for maintaining the QC inspection areas. Area should be tidy, free from debris and organized. Product should be placed in bins and on racks, and not stored on the floor. · Ability to utilize basic math skills to compute rates, ratios, and percentages; interpret bar graphs and charts; and perform accurate counts as applicable. · Experience using a variety of inspection equipment with accuracy and repeatability. · Proficiency with MS Office applications at an intermediate level or higher. Entering data into SAP. Master Control experience a plus. · Training new employees or production staff on quality control procedures, standards, and best practices. · Perform some filing and organizational tasks as needed for record-keeping and compliance. m · Must work well with other employees and convey positive attitude. Requirements Qualifications: · Associate or bachelor's degree in business, supply chain, life sciences or other scientific field or equivalent work experience (1-3 years). · Minimum 1 year experience in Quality Control. · Knowledge or use of using calibrated equipment. · Knowledge on how to use a caliper and micrometer. · Knowledge of Non-Conformance Reports (NCRs) · Previous experience in a regulated industry is preferred (Example - other FDA controlled industry - Grocery Retail, Food & Beverage, Aviation, Etc.). Med Device experience strongly preferred. · Experience working in a matrix environment in which collaboration in all directions is necessary. · Proficient level with Microsoft Office (Outlook, Excel, PowerPoint, and Word) · Experience working in a fast-paced rapidly growing environment. · Excellent communication both verbal & written. · Must be legally authorized to work in the United States. · Must be willing to submit to a pre-employment background check. · Must be at least 18 years of age or older. Physical and Location Demands While performing the duties of this job, the employee is regularly required to stand, walk, use hands to handle or feel, reach with hands and arms, stoop, kneel, and crouch. The employee is regularly required to sit and climb or balance and lift and/or move up to 50 pounds. The employee is regularly required to access and physically navigate the warehouse facility. This position is in Norcross, GA, on-site essential. EEO At GlobalMed Logistix, our people are the driving force behind everything we do. GlobalMed Logistix is an equal opportunity employer that aspires to be the best in the business by building a Team Member experience that celebrates growth, development, and purpose. OTHER DUTIES Please note: this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time, with or without notice.

Job Description **Job Title: Quality Inspector I ** Job Duration: 6 Months Contract - W2 Note: Schedule and Shift: 9-80 A|1st Shift|06:00 AM **Description: ** **Position Overview: ** A Quality Inspector plays a critical role in ensuring that products or services meet established quality standards and customer requirements. They are responsible for conducting inspections, tests, and audits throughout various stages of the production or manufacturing process. The Quality Inspector identifies defects, deviations from specifications, and non-compliance issues, and collaborates with the quality team to implement corrective and preventive actions. They contribute to maintaining quality control procedures and documentation, striving for continuous improvement and customer satisfaction. Key **Responsibilities: ** Inspection and Testing:Conduct thorough inspections and tests on raw materials, components, assemblies, and finished products to ensure adherence to quality standards and specifications. Utilize measuring tools, equipment, and testing devices to verify dimensions, tolerances, functionality, and performance. Perform visual inspections to identify defects, cosmetic flaws, or deviations from product requirements. Documentation and Reporting:Document inspection results, test data, and any non-conformities discovered during inspections. Prepare detailed reports summarizing findings and recommend appropriate actions for resolution. Maintain accurate records of inspections, tests, and audits in compliance with regulatory and company guidelines. Non-Conformance Management:Identify and communicate non-conforming products, processes, or materials to the appropriate departments or stakeholders. Collaborate with cross-functional teams to investigate root causes of non-conformities and implement corrective and preventive actions. Track and monitor the effectiveness of corrective actions and verify their implementation. Process Improvement:Continuously evaluate quality control procedures, processes, and documentation to identify opportunities for improvement. Propose and implement enhancements to streamline operations, enhance quality, and reduce waste. Participate in quality-related meetings, discussions, and initiatives to contribute to a culture of continuous improvement. Compliance and Standards:Ensure compliance with industry standards, regulations, and quality management system requirements. Stay up-to-date with relevant quality control methods, technologies, and industry best practices. Assist in internal and external audits, providing necessary documentation and support. **Skills and Qualifications: ** High school diploma or equivalent; additional technical certifications or training in quality inspection or related field is a plus. Proven experience as a Quality Inspector or similar role in a manufacturing or production environment. Strong knowledge of quality control techniques, inspection methods, and tools. Familiarity with quality management systems (e.g., ISO 9001) and relevant regulatory requirements. Proficient in reading technical drawings, specifications, and schematics. Attention to detail and a systematic approach to problem-solving. Excellent communication skills to effectively report findings and collaborate with team members. Ability to work independently and prioritize tasks to meet deadlines. Proficiency in using computer software and applications for documentation and reporting -- Thanks and Regards, Jaswanth, Technical Recruiter *********************************** Phone- ************** | || | Global Workforce Solutions | Certified MBE & EDGE Company | Microsoft Partner Direct Hire | Contingent Staffing | SOW Services | Clinical Staffing| IT Consulting | Payrolling You should be proficient in: Quality Inspection Experience IPC-A-610 PCB Assembly (Printed Circuit Board Assembly) PCB Components (Printed Circuit Board Components) IPC Joint Industry Standard (IPC-J-STD) AS9100 ISO 9001 Certification Experience High School / GED Experience in a Manufacturing Environment AS9100 Experience Machines & technologies you'll use: Measurement Gauges Calipers and Micrometers Salary info: $16 - $18 / hr

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Inspects finished products, products being processed, incoming materials, parts and assemblies, etc. for conformance to company standards. Position Responsibilities: * Checks randomly selected samples and verifies accuracy of equipment or process. * Reports conditions requiring immediate repair. * Uses advanced inspection methods to develop and conduct quality programs. * Works under general supervision. * Keeps records and makes reports indicating results of inspections. * Uses experience and judgment for planning and accomplishing goals. * May inspect work areas to detect unsafe conditions. * May obtain samples to conduct studies in laboratory analysis and determines measures to be taken to remedy deviations from standards. * Conduct Product and Process audits and LPA (Layered process audits). Specific Knowledge, Skills or Abilities Required: * Strong and accurate data entry skills * Intermediate skills in using Microsoft tools (Outlook, Word, Excel) * Excellent organization skills * Excellent problem-solving skills. * Self-motivated - able to work with minimal supervision * Use of powered hand tools * Operating a Forklift * Testing of raw materials and/or finished products, which may or may not include industry standard test methods (e.g. ANSI/ASME measuring standards) Position Qualifications: Education: HS graduate or equivalent Experience: 1+ years of experience in quality and/or inventory Previous experience with Geometric Dimensioning and Tolerancing (GD&T) Previous experience with Oracle, SAP or other database management systems Shift: Mon-Fri, 7am-3:30pm Work Environment and Physical Requirements: Activity Constantly - 6+ hours : Stand, Walk, Twist/Turn, Stoop/Bend Frequently - 3 to 6 hrs. : Lift to 50 lbs. * Manufacturing Environment * Working in hot and cold climates * Personal Protective Equipment - Ear protection is readily available in high level noise areas * Working around machinery with moving parts * Working around moving objects or vehicles, * Potential for slippery and uneven walking surfaces including use of ladders * Working in close proximity to others * Exposure to offensive odors * Vision abilities required to validate and enter data on computer as well as calibrated measurement tools * Exposures to and working with hazardous waste Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.

Job SummaryValidates the conformity of cut parts or ready to be shipped parts relative to customer requirements. Includes verifying against standards, specifications, condition of supply and internal documentation.Job Description Key Accountabilities: Perform all steps of product quality inspections in all departments, communicate effectively with corporate quality department and external customers, and effectively train others Inspect parts visually, check dimensions, and check for line marking, harness and conductivity. Review mill test reports for conformity and review conformance certificates release from other distributors. Ensure daily and periodical calibration, ensuring ownership and maintenance of measuring devices. Keep accurate quality reports. Support quality improvements and quality investigations by collecting and supplying requested data for analysis of non-conforming material. Segregate non-conforming material. This is a position that works directly on the warehouse floor on or around heavy machinery. Meets TKMNA Employee Attributes/Competencies The above is intended to describe the general content of and requirement for the performance of this job. It is not to be construed as an exhaustive statement of duties, responsibilities or requirements. This position has been identified as “safety sensitive” by thyssenkrupp under applicable laws. Accordingly, any application for this position that is considered for employment with thyssenkrupp requires successful completion of pre-employment drug testing, which may include testing for marijuana in accordance with any applicable federal, state, and local laws. Qualifications: Minimum Requirements: High school graduate with 1 year experience as QC inspector in aeronautical or automotive industry. Safety Mindset. Preferred Requirements: Technical college graduate with 1+ years of experience as QC inspector in aeronautical field Experience with aluminum alloys. Able to create basic quality procedures. Benefits Overview We offer competitive company benefits to eligible positions, such as : Medical, Dental, Vision Insurance Life Insurance and Disability Voluntary Wellness Programs 401(k) and RRSP programs with Company Match Paid Vacation and Holidays Tuition Reimbursement And more! Benefits may vary based on job, country, union role, and/or company segment. Please work with your recruiter or tk representative for applicable benefits information. Disclaimer This is to notify the general public that some individuals/entities are using the thyssenkrupp (“TK”) name, trademark, domain name, and logo without authorization. They are posing as employees, representatives, or agents of TK and its associated/group companies. These individuals/entities are fraudulently offering jobs online through texts, websites, telephone calls, emails, or by issuing fake offer letters. They are also soliciting jobseekers to deposit money in certain bank accounts or providing jobseekers with fraudulent checks to obtain banking information. TK does not ask, solicit, or accept any monies in any form from candidates, job applicants, or potential jobseekers, who have applied to or wish to apply to TK, whether online or otherwise as a pre-employment requirement. TK bears no responsibility for money being deposited/withdrawn therefrom in response to such fake offers. TK does not: 1. Send job offers from free email services like Gmail, Rediffmail, Yahoo mail, etc.; 2. Request payment of any kind from prospective jobseekers or candidates for employment; 3. Authorize anyone to collect money or agree to any monetary arrangement in return for a job at TK; 4. Send checks to job seekers; or 5. Make job offers through third parties. In the event TK uses professional recruitment services through a third party, offers are always made directly by TK and not by any third parties. PLEASE NOTE: 1. TK strongly recommends that potential jobseekers do not respond to such fake solicitations, in any manner; 2. TK will not be responsible to anyone acting on an employment offer that is not directly made by TK; 3. Anyone making an employment offer in return for money is not authorized by TK; and 4. TK reserves the right to take legal action, including criminal action, against such individuals/entities. TK follows a formal recruitment process through its own HR department and applications are evaluated by its HR department through pre-defined processes. Please visit our official careers website at ******************************** to view authentic job openings at TK. If you receive any unauthorized, suspicious, or fraudulent offers or interview calls, please email us at **********************************************. We shall not accept any liability towards the representation made in any fraudulent communication or its consequences, and such fraudulent communication shall not be treated as any kind of offer or representation by TK or its group companies and affiliates.

YMC is seeking a Transmission Line Quality Inspector to support an electrical utility transmission project. The Quality Inspector will be responsible for monitoring and verifying that all construction activities meet project specifications, utility standards, safety requirements, and quality control procedures. This role is essential to ensuring that overhead transmission line construction is executed to the highest standards of workmanship, safety, and compliance. Key Responsibilities Conduct daily inspections of transmission line construction, including foundations, structures, hardware, conductor installation, and grounding systems. Verify that work is performed according to engineering drawings, technical specifications, and utility requirements. Document inspection findings with detailed reports, photographs, and quality checklists. Monitor contractor performance to ensure compliance with project schedules, safety protocols, and quality control measures. Identify and report deficiencies or non-conformance issues, and follow up on corrective actions. Coordinate with the construction manager, utility representatives, and contractor teams to resolve quality issues. Perform material inspections and verify proper handling, storage, and installation. Ensure adherence to OSHA, NESC, and utility-specific safety standards. Support commissioning and project closeout activities by reviewing as-built documentation and quality records. Qualifications 5+ years of experience in transmission line construction, inspection, or quality control (utility experience preferred). Strong knowledge of overhead transmission line components, installation methods, and industry standards. Familiarity with electrical utility quality assurance/quality control (QA/QC) practices. Ability to read and interpret engineering drawings, specifications, and work packages. Proficient in Microsoft Office Suite (Word, Excel, Outlook) for reporting and documentation. Strong written and verbal communication skills. Valid driver's license and ability to travel to project sites. OSHA 10/30 or equivalent safety training (preferred). Work Environment & Physical Requirements Work is performed in both office and outdoor construction environments, including exposure to varying weather conditions. Ability to walk, climb, and stand for extended periods in rugged terrain. Must be able to lift up to 50 lbs. as needed.

Our Quality Assurance Inspectors are responsible for performing inspections, audits of purchased parts, units, materials, equipment, panel/module level assemblies and quality control programs to specifications. Interprets manufacturing drawings, diagrams, specifications and lists to approve or reject units. Maintains support documentation and reviews performance data. Ensures in-process and finished products meet company and customer requirements. Determines or assists in determining methods and procedures necessary for inspection. Validates products and documentation for compliance to all applicable requirements and prepares items for presentation to the customer for acceptance and delivery. Inspectors also perform First Article Inspections and Finished Goods Testing. The inspector must possess good communication abilities, be flexible and able to lift up to 30 lbs. Essential Duties and Responsibilities * Responsible for the incoming material inspections of products and raw materials including metals and sub tier vendor products. * Inspects various metal products at various stages of the manufacturing process, and tests products for a variety of qualities * Interfaces with Manufacturing, Quality and Process Engineering Staff as needed on the interpretation of Customer and Internal Engineering drawings, specifications, and standards. * Able to use simple hand tools and basic measurement equipment such as digital calipers, micrometers. Depth gauges etc. * Act as an internal auditor responsible in the implementation and conformance to Quality standards of AS9100 and IATF as well as ISO 14001 and OSHA safety requirements. * Will assist manufacturing if required to produce products that meet or exceed customer expectations. * Control of non-conforming product and maintenance of accurate records. * May perform other duties as assigned, including work in other functional areas to cover absences or relief, to equalize peak work periods or otherwise to balance the workload. Preferred Skills and Experience To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * High School Diploma or equivalent with * 3+ years hands on experience using gages such as microscopes, calipers, height gages, scales, and other equipment preferred * Experience in metal working, welding, forming, cutting, finishing preferred. * Good written and oral communication skills with the ability to interface across the organization to achieve effective results * * Experience working in a team environment to solve problems and balance workloads * Ability to solve practical problems and deal with a variety of variables in situations where only a limited amount of information and/or standardization exists. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee is regularly required to stand; walk; use hands to finger, handle or feel objects, tools or controls; reach with hands and arms; climb or balance; stoop; knell, crouch, or crawl; talk or hear; taste or smell. * The employee must regularly lift and/or move up to 30 pounds. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work Environment Hours Monday through Friday 9-5 The work environment characteristics described here are representative of those an employee encounters while performing the essential job functions of this job. Reasonable accommodations will be made available to enable individuals with disabilities to perform the essential functions. * While performing the duties of this job, the employee will occasionally work near moving mechanical parts, high-pressure and in outside weather conditions and is occasionally exposed to fumes or airborne particles, risk of electrical shock and risk of radiation. * Employee will occasionally deal with chemical solutions for conducting penetrant testing on products. * Safety glasses will be required while in the production areas, and safety shoes will be required when performing work in a production cell. Work Authorization * US Citizenship required for ITAR registration

Job Description ***********PLEASE READ BELOW***************** The Immediate Pay, Quality Inspector position offers individuals the opportunity to receive payment for their work on the same day they perform their duties. This position is designed to provide a quick and fair compensation system for workers who are seeking immediate income. Upon starting the job, workers will be paid for their first day of work (ONLY) at the end of that day. However, it is important to note that if a worker does not show up for their second day of work without prior notice or valid reason, they will be terminated from the position. This is a W2 position. You will not be considered if you do not perform video screen. Overall Purpose of the Quality Inspector Provide Quality services and support for all missions assigned to a manufacturing or warehouse site while ensuring a healthy and safe work environment. Reports to Site Supervisor/Site Leaders Responsibilities (To include but not limited to the following) Client Relationship & Business Development Act as an impartial third party between the production source and the customer facility to ensure the product meets set criteria Operations Check/inspect manufactured parts or products for defects Read and follow work instructions and general processes Use measuring or testing equipment as needed Ensure products meet quality standards Display excellent customer service Must comply with local and company Health & Safety legislation, laws, and policies Organization & Management Collect and record data Technical Utilize company portal for time recording and policy acknowledgements Other Any other duties as assigned Knowledge, skills, abilities Hard skills Requirements Must be able to speak and read in the English language Good communications skills Must be able to multi-task Ability to work in a fast-paced environment Ability to handle sensitive and confidential material Ability lift /move 50 pounds Must have reliable transportation

Quality Technician - $30-35/hr + Extensive OT/DT Annual Average Salary: $110,000-$140,000 Our client, a leading industrial services company, is seeking experienced Quality Technicians for 100% travel positions. This is a Direct Hire opportunity with excellent earning potential! Job Requirements 5+ years inspection experience with pressure equipment/piping (Power plants, Refineries, Petrochemical facilities) Non-destructive Examination (NDE) experience required PT certification with 210 hours minimum VT certification MT certification UTT certification CWI certification Level 2 certification required Knowledge of ASME Codes and power generation industry standards Experience with welding processes and welder qualifications Strong communication and interpersonal skills Key Responsibilities: Perform and document inspection activities at client sites Review specifications, drawings, and reports for quality compliance Inspect incoming materials per contract requirements Work directly with Owner QA and Jurisdictional Inspectors Compile inspection documentation for final approval Work Environment: 100% travel to Nuclear & Fossil Power Generation, Petroleum, and Chemical facilities Initial training period at Suwanee, GA facility Field conditions in industrial environments This is an exceptional opportunity for experienced quality professionals who enjoy travel and want to maximize their earning potential! To apply for the Non-Destructive Testing Technician position, please submit your resume in response to this ad or fill out an application on our website, impactstaffing.com. Impact Staffing is a local staffing and recruiting company with a team of recruiters ready to help you find work. We specialize in administrative, warehousing, and manufacturing jobs. Impact Staffing is an Equal Opportunity Employer and does not discriminate on the basis of race, color, religion, sex (including pregnancy, sexual orientation or gender identity) national origin, disability, age (40 or older) or genetic information including family medical history

The name "Astemo" is derived from the words "Advanced Sustainable Technologies for Mobility" and describes the mission of the integrated company to "provide a safe, sustainable and comfortable mobility life through technologies that contribute to an advanced and sustainable society". Our people are at the heart of achieving these goals, and we are proud to be an equal opportunities employer. We recruit and develop people from diverse backgrounds who can bring their skills and experience to our organization and make us even more effective. Own the Future and become a part of the team. We have a current career opportunity as a Quality Inspector. ESSENTIAL FUNCTIONS: Inspects in-process work, finished products and/or purchased materials for conformance to specifications, using basic inspection instruments and/or techniques. Performs 100% inspection for products (appearance, dimension) as necessary. May provide performance test of completed product, set or adjust and operate inspection equipment to ensure its accuracy. Inspects for dimensional accuracy, process and quality operations to assure conformance to customer, engineering and quality requirements. Participates on project teams to prevent or solve manufacturing or quality problems, reduce cycle times, cost increase efficiency, or any other project, as necessary. Prepares and processes inspection acceptance or rejection paperwork, maintains records, files, and related documentation as necessary. Utilize effective communications and problem solving skills to foster an effective team environment which continually strives for safety, quality, organizational, product, productivity, and improvements. QUALIFICATIONS: High school diploma or equivalent required. Some college preferred. Three to five years of quality inspection and/or production experience preferably in a fast paced automotive environment. Ability to utilize inspection equipment such as calipers, micrometers, CMM, height gauge, Vision Systems and other measuring devices. ISO, and/or TS16949 environment preferred. Utilize effective communication, team work, problem solving, and organization skills to foster an effective team environment which continually strives for safety, quality, organizational, product, productivity, and improvements. Good computer skills. Ability to input data and effectively utilize programs such as Microsoft Office to develop reports. Requires ability to work both independently and effectively within a team environment to ensure individual and departmental objectives are accomplished. Specific vision abilities include close vision, peripheral vision, depth perception, and color vision. Ability to lift and/or transport 25 lbs and utilize proper lifting techniques and safety guidelines. Ability to read and understand drawings and measure parts. Familiarity with GD&T preferred. SUPERVISORY RESPONSIBILITIES: None. PHYSICAL DEMANDS: While performing the duties of this job, the employee is frequently required to walk. The employee occasionally is required to stand; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; climb or balance; stoop, kneel, crouch, or crawl; and talk or hear. The employee must regularly lift and/or move up to 10 pounds, frequently lift and/or move up to 25 pounds, and occasionally lift and/or move up to 50 pounds. WORK ENVIRONMENT: This position works in a warehouse/production environment. The employee occasionally works near moving mechanical parts. The noise level in the work environment is usually loud. The performance of this position requires exposure to the manufacturing areas where certain areas require the use of personal protective equipment. l ncomplete submissions will not be considered. Since we only hire the best and want to maintain a safe and pleasant work environment for all, final candidates are subject to drug screen and background checks. Astemo is an Equal Opportunity Employer (M/F/V). Equal Opportunity Employer (EOE) - Qualified applicants will receive consideration without regard to their race, color, religion, sex, sexual orientation, gender, identity, disability, protected veteran status and national origin. At Astemo, we're challenging the status quo with the power of diversity, inclusion, and collaboration. Our goal is to build an inclusive work environment that celebrates the differences of our employees. We want to ensure that every employee feels valued, respected and empowered. We don't just accept difference-we celebrate it, we support it, and we thrive on it for the benefit of our employees, our products, and our community. Astemo is proud to be an equal opportunity employer. If you need a reasonable accommodation to apply for a job at Astemo, please send the nature of the request and contact information to ************************* when applying for the position.

**3M is seeking Quality Inspector candidates in Clarkston, Georgia.** Full-time 2nd Shift & 3rd Shifts available + Pay starting: $22.52 per hour + New hires start with 3 weeks paid vacation + 12 paid holidays + Health, vision and dental start day one + Employee stock discount + 401K Match of 5% **Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** As a Quality Inspector, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Inspecting product to determine compliance with order specifications, customer requirements, and company's quality control system + Assuring compliance with legal requirements, and shipping and packing facilities for conformity to specified standards + Excellent visual skills to detect minute non-conformances (ex: cracks, voids, tool marks, etc.) + Operate small hand tools and process equipment with dexterity + Work with precision tools and equipment using good judgment to prevent damage to equipment, to understand equipment operation, and to be efficient **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Possess a High School Diploma / GED or higher (completed prior to start) + Previous quality inspection experience in a private, public, government, or military environment Applicants meeting the basic qualifications above may be required to take and pass 3M elected testing as part of the selection process. **Additional qualifications that could help you succeed even further in this role include:** + Experience in an aerospace or defense related industry + Security Clearance **Work location:** Clarkston, GA **Relocation Assistance** : Not Authorized **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting assistant on 3M.com/careers. The starting rate of pay for this position is $22.52. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** . Applicable to US Applicants Only:The starting rate of pay for this position is $19.30, with the potential to reach $24.67 . This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: ***************************************************************. All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: *************************************************************** 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Who is Habasit? Habasit is the global leader in the manufacturing of lightweight conveyor belting. Our slogan “Solutions in Motion” defines us; we are a provider of world class power-transmission and conveying solutions. At Habasit, we understand that a global leader is only as good as the people who represent it, and we are always searching for the right people to keep us in motion. We are looking for ambitious individuals, leaders, and students who are ready to help move us forward. If you have a can-do attitude and want to join a world-class organization, read on and apply today! SUMMARY The Quality Technician is primarily responsible for managing and driving root cause and corrective actions within the manufacturing & business environment. This role ensures that product and process nonconformities are properly investigated, documented, and resolved in compliance with company procedures. The Quality Technician partners with cross-functional teams to identify root causes, implement effective solutions, and monitor results to prevent recurrence. This role is ideal for someone who thrives on problem-solving, compliance, and driving accountability across teams. Things you should know about Habasit's opportunities: Direct hire opportunity Eligible for bonuses and incentives $500 bonus after 90 days of employment $500 additional bonus after 180 days of employment $1000 additional bonus after 365 days of employment $750 referral bonus after 6 months Basic Qualifications Must be 18 years of age Must be cleared on any background screening English literacy Ability to use a calculator and a tape measure. Computer skills a plus Must be able to lift up to 40 pounds. Must be able to stand, walk, sit; use hands and fingers to handle or feel; and reach with hands and arms. Why should you join our team? Our amazing environment keeps safety as its top priority! You can enjoy a collaborative atmosphere in a clean and climate-controlled facility. Our core values are how we thrive, and you will get to work with people who share them: Organizational Pride, Highest Ethical Standards, Quality You Can Trust, Collaboration, Entrepreneurship, and Continuous Improvement. Our opportunities to advance give any qualified associate the opportunity to move to a higher level job. Our on-the-job training and skills development will ensure your success in your job. If you are interested in becoming a part of a World-Class Team, submit your application today! ESSENTIAL DUTIES AND RESPONSIBILITIES include the following: Coordinate and oversee corrective and preventive action activities across manufacturing operations. Track, document, and maintain corrective action records in accordance with company requirements. Ensure timely closure of corrective action tasks and verify effectiveness of solutions. Lead investigations into product or process non-conformances. Facilitate problem-solving sessions using tools such as 5 Whys, Fishbone Diagrams, and FMEA. Collaborate with engineering, production, and quality teams to identify systemic issues. Create or revise work instructions or procedures to support improvement actions. Technical writing ability and knowledge of document & configuration control. Prepare reports and summaries of corrective action status. Support internal and external audits by providing corrective action documentation and objective evidence. Recommend process improvements to reduce defects, scrap, and rework. Provide training and guidance to employees on corrective action and best practices. Monitor trends in non-conformances and proactively address recurring issues. Perform quality system and process audits. Perform product inspections and nonconformance dispositions. Experience with QT9 QMS a plus. All other relevant duties as assigned by supervisor QUALIFICATIONS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Additionally, the Quality Technician must have proven root cause problem-solving experience, attention to detail & documentation accuracy; cross-functional collaboration & analytical thinking with a continuous improvement mindset. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions RESPONSIBILITIES OF THIS POSITION: 3-5 years of experience in manufacturing quality assurance or corrective action coordination. Strong knowledge of CAPA processes, ISO 9001, Lean, and Six Sigma methodologies. Excellent organizational, communication, and facilitation skills. Proficiency in quality tools and software for managing & tracking corrective actions & tasks. Ability to assess adequacy of objective evidence to approve and close corrective actions. Strong knowledge of ISO 9001, Lean Manufacturing, and Six Sigma principles. Excellent leadership, communication, and problem-solving skills. Proficiency in quality tools (SPC, FMEA, control plans, etc.) Working experience with Microsoft programs: MS Word, Power Point, Visio, Excel, Outlook. Strong aptitude for learning software and managing data. Demonstrated people and leadership skills, including conflict resolution, problem solving, and performance management. Excellent organizational skills, attention to detail, and the ability to work with staff from diverse disciplines and backgrounds. Other duties as assigned PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand. The employee frequently is required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to walk and sit. The employee is occasionally required to stand, stoop and/or kneel. The employee must regularly lift and/or move up to 25 pounds and occasionally lift and/or move up to 60 pounds, with assistance if necessary. Specific vision abilities required by this job include close vision, distance vision, peripheral vision, depth perception, and ability to adjust focus.

What We Do FOX Factory designs, engineers, manufactures and markets performance-defining products and systems for customers worldwide. Our premium brand, performance-defining products and systems are used primarily on bicycles, side-by-side vehicles, on-road vehicles with and without off-road capabilities, off-road vehicles and trucks, all-terrain vehicles, snowmobiles, specialty vehicles and applications, motorcycles, and commercial trucks. Some of our products are specifically designed for and marketed to a variety of leading cycling and powered vehicle original equipment manufacturers ("OEMs"), while others are distributed to consumers through a global dealer and distribution network. Fox Factory Holding Corp. is the holding company of FOX Factory, Inc. and is publicly traded (FOXF) on Nasdaq. Why you should join us Not only do we provide competitive wages, you will also have access to great benefits and employee discounts. But more importantly, it's a fun environment where we truly enjoy working as a team and bringing great products to our customers! If this sounds like something you would love to do, and a place you want to be a part of, get in touch with us by submitting your application. We look forward to hearing from you! Position Summary: Inspects finished products, products being processed, incoming materials, parts and assemblies, etc. for conformance to company standards. Position Responsibilities: * Checks randomly selected samples and verifies accuracy of equipment or process. * Reports conditions requiring immediate repair. * Uses advanced inspection methods to develop and conduct quality programs. * Works under general supervision. * Keeps records and makes reports indicating results of inspections. * Uses experience and judgment for planning and accomplishing goals. * May inspect work areas to detect unsafe conditions. * May obtain samples to conduct studies in laboratory analysis and determines measures to be taken to remedy deviations from standards. * Conduct Product and Process audits and LPA (Layered process audits). Specific Knowledge, Skills or Abilities Required: * Strong and accurate data entry skills * Intermediate skills in using Microsoft tools (Outlook, Word, Excel) * Excellent organization skills * Excellent problem-solving skills. * Self-motivated - able to work with minimal supervision * Use of powered hand tools * Operating a Forklift * Testing of raw materials and/or finished products, which may or may not include industry standard test methods (e.g. ANSI/ASME measuring standards) Position Qualifications: Education: HS graduate or equivalent Experience: 1+ years of experience in quality and/or inventory Previous experience with Geometric Dimensioning and Tolerancing (GD&T) Previous experience with Oracle, SAP or other database management systems Work Environment and Physical Requirements: Activity Constantly - 6+ hours : Stand, Walk, Twist/Turn, Stoop/Bend Frequently - 3 to 6 hrs. : Lift to 50 lbs. * Manufacturing Environment * Working in hot and cold climates * Personal Protective Equipment - Ear protection is readily available in high level noise areas * Working around machinery with moving parts * Working around moving objects or vehicles, * Potential for slippery and uneven walking surfaces including use of ladders * Working in close proximity to others * Exposure to offensive odors * Vision abilities required to validate and enter data on computer as well as calibrated measurement tools * Exposures to and working with hazardous waste Disclaimer: This list does not represent all physical demands. Descriptions are representative of those that must be met by employee to successfully perform the essential functions of the job. Reasonable accommodation may be provided to enable individuals with disabilities to perform the jobs' essential functions. Note: FOX provides equal employment opportunities for all employees and applicants for employment without regard to race, color, ancestry, national origin, gender, gender identity, sexual orientation, marital status, religion, age, physical disability (including HIV and AIDS), mental disability, results of genetic testing, or service in the military, or any other characteristic protected by the laws or regulations of any jurisdiction in which we operate. We base all employment decisions -including recruitment, selection, training, compensation, benefits, discipline, promotions, transfers, layoffs, terminations and social/recreational programs - on merit and the principles of equal employment opportunity. Fox offers an excellent compensation package and wide-ranging opportunities for professional development. Medical, Dental, Vision, Health Spending and Dependent Care Savings Accounts, Disability and Life Insurance benefit programs are available, as is a 401k plan with employer matching. Eligibility for all benefit programs is defined by the applicable plan document or employee handbook.