Quality inspector jobs in Atascocita, TX - 281 jobs

1. Perform in-process and final inspections on fabricated parts, weldments, assemblies, and structural components. 2. Verify dimensions using calipers, micrometers, gauges, tapes, weld gauges, and other precision measuring tools, prepare reports. 3. Review and interpret engineering drawings, welding symbols, fabrication standards, and customer specifications. 4. Review NDE reports, prepare ncr when necessary. 5. Ensure products meet quality standards, customer requirements, and regulatory codes. QUALIFICATIONS: 1. High school education or equivalent. 2. Ability to use appropriate measuring and test equipment. 3. Product familiarity working in a similar environment. TRAINING REQUIRED: 1. Strong attention to detail, accuracy and problem solving skills. Ability to read and interpret engineering drawings and specifications. 2. Performing dimensional inspections. 3. Experience with NDT methods. (VT, MT, PT) 4. Experience working with ITPs, MTRs and fabrication quality documentation PPE AND SAFETY: 1. Follow all shop safety policies, including PPE requirements. 2. Reasonable accommodations are made to enable

Main Purpose: The Instrumentation and Electrical (I&E) Quality Control Inspector is responsible for ensuring all integrated components, assemblies and finished shelter, rack and enclosure packages meet Englobal quality standards, customer specifications and applicable codes and regulations related to instrumentation and electrical systems and functionality. Some fabrication inspection is expected, related to quality of build. This role works closely with I&E production, engineering and project management to identify issues early, maintain documentation and drive continuous improvement across the shop floor. Essential Functions: * Own and maintain Englobal Quality Management Systems including continually working with operations to improve production quality while improving schedule * Address customer feedback and complaints, acting as a key contact for quality-related inquiries * Develop and execute comprehensive test plans for system walk-downs, final inspections and startup sequences * Interact routinely with Purchasing, Engineering, Sales and other stakeholders to proactively improve the quality of components and completed assemblies * Analyze operational capabilities, develop and maintain quality performance metrics * Perform Quality System audits and provide support for areas in need of continuous improvement * Partner with the Engineering department to review (and correct) all shop fabrication drawings before they are released to the floor * Manage and execute all pre and customer witnessed Factory Acceptance Testing activities * Travel occasionally, approximately 5-10% * Identify potential conflicts, deviations or non-compliance issues during the fabrication and integration phases and develop corrective action plans * Lead internal and external audits to ensure adherence to federal, state and local codes, as well as project-specific specifications * Perform other duties assigned by supervisor Benefits Offered: * Earned Wage Access * Health, Dental and Vision Insurance * 401(k) with Company Match * Paid Holidays * Paid Vacation * Life Insurance * Disability Insurance * Safety Awards * Company Store * Employee Assistance Program (EAP) Requirements Physical Requirements: * Standing, sitting, walking, stooping, kneeling, climbing, feeling, talking, hearing and seeing * Turning, twisting, bending, and balancing * Pushing, pulling and reaching * Must be able to lift and / or move up to 25 pounds and occasionally 50-75 pounds Job Requirements: * 5+ years of experience in instrumentation and electrical quality inspection * Must have overall work process knowledge to support the development and maintenance of the quality management system * Must have problem solving skills to apply methods for Root Cause Analysis (RCA). Understanding of Design Failure Mode Effect Analysis (DFMEA) and Process Failure Mode Effect Analysis (PFMEA) * Knowledge of supplier manufacturing processes and required error proofing and other quality systems as needed to provide flawless quality * Knowledge of regulatory requirements (National Electrical Code (NEC), National Fire Protection Association (NFPA), Atmosphères Explosibles (ATEX), Internation Electrotechnical Commission System for Certification to Standards Relating to Equipment for Use in Explosive Atmospheres (IECEx), International Organization for Standardization (ISO), American Petroleum Institute (API) etc.) * Knowledgeable in inspection processes - incoming inspection, material & equipment verification and marking requirements and in-process inspection reporting * Must be meticulous about capturing and retaining information * Must have basic computer skills (Word, Excel, Record-keeping software etc.) * Must be able to work in a team environment and be able to explain issues clearly to team * Must be analytical and detail oriented * Must be able to pass pre-employment drug screen * Must be able to pass a background check Desirable Experience, Education, and Training: * Bachelor's degree in a Quality related field * Previous supervisory experience Tools, Equipment, and Technology: * Office equipment and technology Environmental Conditions: * Manufacturing and fabrication shop environment * Mix of shop floor and office / documentation work * May require walking the yard, climbing stairs and inspecting large assemblies Englobal a Gulf Island Company will not sponsor applications for work visas. Additionally, applicants for employment with Englobal a Gulf Island Company, must be currently authorized to work in the United States on a full-time basis. Accordingly, Englobal a Gulf Island Company, will not consider applications from candidates who require the company to sponsor a work visa and who are not currently authorized to work in the United States on a full-time basis. Englobal a Gulf Island Company is not accepting unsolicited candidates from search firms for posted employment opportunities. Please no phone calls or emails. All resumes submitted by search firms to Englobal a Gulf Island Company, employees via email, the internet, or any other form and/or method without a valid written search agreement in place for the position will be deemed the sole property of Englobal a Gulf Island Company. No recruiting placement fee will be paid in the event Englobal a Gulf Island Company, hires the candidate due to the referral or through other means. #IND25

The Quality Control Inspector 1 supports the organization in the development, maintenance and execution of a quality control program that will allow the business to continually improve. In addition, the Quality Control Inspector 1 will help ensure that the supply being delivered from vendors and the product being shipped to customers meets the expected standards and specifications. Duties and Responsibilities: Inspect raw materials, machined, welded, and coated parts ordered and received at TEI (TRENDSETTER ENGINEERING, INC) headquarters from vendors and internal machine shop for quality and accuracy. Verify parts received against engineering drawings, specifications, and manufacturing records. Prepare electronic inspection reports for incoming products. Maintain incoming inspection log. Issue, document, and follow up on NCR's. Manage calibrated measuring equipment and certificate log. As necessary, perform other duties, requiring the same level of skill & responsibility. Support any new quality initiatives as required. Be familiar with company HSE (Health, Safety, and Environmental) policies and procedures. Share knowledge & best practice across the company. All other duties as assigned. Qualifications: Associate degree or at least 5 years of previous experience related to quality control inspection, preferably within the oil & gas industry. Advanced skills in dimensional measurement and verification, utilizing all necessary tools. Proficient computer skills and knowledge of Share point and Microsoft 365 required. Ability to demonstrate initiative and assertiveness, plan and organize work in an efficient manner, and work well under stress and time pressures. Strong interpersonal and communications skills, both verbal and written

Job DescriptionPetroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Ameritex Machine and Fabrication is a high mix low volume sheet metal and structural fabrication facility that uses a variety of equipment such as CNC Fiber Lasers, CNC punch presses, CNC press brakes, and tube lasers to support over 19 production and assembly lines. The company serves customers in energy, oil and gas, automotive, electric vehicle, and aerospace. We operate out of a state of the art 100,000 sqft facility in Conroe, Texas. Job Responsibilities \tAddresses daily quality concerns and questions \tTroubleshoots manufacturing problems and quality issues \tWork closely with operation teams to ensure process controls are in place and adequate to meet standard requirements \tEnsure any non-conforming product is properly identified, quarantined and communicated \tExamines material or product for surface defects such as crack, pits, and incomplete welds \tVerifies specified dimensions of product or material \tConduct incoming material inspection, in-process inspection, and final inspection to procedures, specifications, drawings, samples, or illustrations. \tMust be able to follow instructions and work independently \tCleaning, organizing, and setting up workstations \tKitting or grouping required parts per job requirements \tMust be able to easily multitask around the shop. Qualifications \tExperience in manufacturing quality environment \tTooling experience needed \tComputer capable \tAble to stand, walk, squat, move for 8+ each day At least 2 years of college education Work Schedule Though this professional needs to complete his/her work during the standard routine hours, he/she might need to be flexible at times and extend beyond the normal hours to do the work which needs to be completed on a priority basis. $18.00 - $28.00 Hourly

We are SGS - the world's leading testing, inspection and certification company. We are recognized as the global benchmark for sustainability, quality and integrity. Our 99,600 employees operate a network of 2,600 offices and laboratories, working together to enable a better, safer and more interconnected world. Summary The Petroleum Inspector performs testing of bulk liquid or gaseous hydrocarbon or chemical cargo supervision services, such as but not limited to, gauging, sampling and reconciliation of transfer from shore tank, barge or ship to shore tank, barge or ship. Acts in accordance with Client, SGS Operational Excellence practices and Industry standards. Job Functions Physically samples, measures, and takes the temperature of vessel's tanks and shore tanks utilizing a variety of methods dictated by company and American Petroleum Institute (API) procedures. Follows Safely standards and performs job efficiently. Works within defined technical processes and procedures or methodologies. Calculates and reports quantities of the bulk liquid or gaseous hydrocarbon transferred and performs full reconciliation. Completes all required reports and forms, using the SGS propriety Ship Inspection Report (SIR) and / or Site Acceptance Test (SAT) systems. Works in cooperation with client's representatives, US Customs, vessel personnel, government agents and shore facility personnel. Maintains regular communication with the business unit office staff with reference to job status, problems, concerns, etc. Maintains knowledge and adheres to the latest industry, client and SGS internal standards, policies and procedures. Operates to the highest standards of ethics, in accordance with the SGS Code of Integrity including adhering to all company safety practices. Assists in other branch duties as assigned related to back office support and housekeeping. Performs other duties as assigned. Qualifications Education and Experience High School or equivalent (Required) 6 months to 2 years of transferrable industry experience (Prefered) Completion of internal Inspector Development Program Level (Preferred) Licenses and Certifications Valid Driver's License (Required) Transportation Worker Identification Credential (TWIC) (Preferred) Must maintain valid Driver's License and TWIC card once obtained through course of employment (Required) International Federation of Inspection Agencies (IFIA) Certification (Preferred) Knowledge, Skills and Abilities Continues to gain knowledge and expertise in the profession (Required) Uses existing procedures to solve routine or standard problems (Required) Has no discretion to vary from established procedures by performing structured work assignments (Required) Language Skills: English - Basic level (Required) Mathematical Skills: Basic level of proficiency with a good understanding of fractions and decimals (Required) Reasoning Skills/Abilities: Intermediate level (Required) Communication Skills: Must be able to effectively present information and respond to questions from individuals and/or groups both within the organization or while representing the organization (Required) Flexibility: Must be flexible with ability to accept changes in instructions on short notice (Required) Individual must be dependable and reliable whose daily presence adds to the success of the Department (Required) Must have a positive attitude and show eagerness to accomplish goals and achieve desired results while working independently or in a team setting (Required) Ability to work independently with minimal or no supervision (Required) Ability to work effectively under pressure, while performing numerous projects with different deadlines (Required) Ability to synthesize information from a variety of sources into solutions (Required) Computer Skills MS Office - Basic to Intermediate user proficiency (Required) Physical Demands of the Job Stand: Frequently Move or traverse: Frequently Sit: Occasionally Use hands: Constantly Reach with hands and arms: Frequently Climb or balance: Frequently Stoop, kneel, crouch or crawl: Frequently Talk/hear: Constantly Taste/Smell: Occasionally Lift/carry/push or pull: Frequently 50 lbs Additional Information SGS is an Equal Opportunity Employer, and as such we recruit, hire, train, and promote persons in all job classifications without regard to race, color, religion, sex, national origin, disability, age, marital status, sexual orientation, gender identity or expression, genetics, status as a protected veteran, or any other characteristics protected by law. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily with or without reasonable accommodations. The requirements listed above are representative of the knowledge, skills, and/or abilities required. This job description should not be construed as an exhaustive statement of duties, responsibilities or requirements, but a general description of the job. Nothing contained herein restricts the company's rights to assign or reassign duties and responsibilities to this job at any time. If you are applying for a position within the United States and you have difficulty completing the on-line employment application because of a disability, please call ************ for assistance and leave a message. You will receive a call back. Please note, this phone number is not for general employment information, but is only for individuals who are experiencing difficulty applying for a position due to a disability.

Quality Control Inspector II (Current Aerospace Industry Exp. Req.) Employment Type Full-Time Benefits Offered Dental, Life, Medical, Paid Time Off, Retirement, Vision Compensation $20 to $23 per hour to be determined at the time of the interview with our customer. This is a Permanent position. Our customer is a leading and growing company in the aerospace market that has grown every year since our inception over 20 years ago. Key Responsibilities and Accountabilities: · Examine materials and final products, calculates tolerances and dimensions using hand tools, verifies conformance to standards, reads work orders, routers and blueprints to determine product specifications as a part of inspecting products and materials in process and in final inspection · Document / record quality inspection information · Evaluate information to determine whether parts and materials conform to regulations and standards · Maintain current knowledge of organizational policies and procedures, federal and state policies and directives · Analyze data or information · Establish and maintain interpersonal relationships · Evaluate information to determine compliance with standards Professional Skills: · HS diploma or equivalent or equivalent combination of experience/education · 4 or more years of related experience required · Intermediate knowledge of mathematics and applications · Basic AS9100 knowledge · Intermediate knowledge of machines and tools, including their designs, uses, repair, and maintenance. This includes Keyence inspection equipment, optical comparators, digital micrometers and calipers, gage pins, ring gages, dial indicators, concentricity gage, thread segments Intermediate knowledge of design techniques, tools, and principals involved in production of precision technical plans, blueprints (including geometric dimension and tolerancing features), drawings, and models as well as advanced knowledge of geometric dimension tolerancing (GD&T) features Physical Requirements and Working Condition: · Must be able to bend, stoop, kneel, and stand for prolonged periods of time, climb steps, and ladders · Must be able to work at heights utilizing fall protection equipment (man lifts, ladders, and stand) · Must be able to lift up to 45lbs · Subject to environmental conditions -protection from weather conditions but not necessarily from temperature changes · Subject to hazards to include a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, exposure to high heat or exposure to chemicals · Subject to loud constant noise Subject to atmospheric conditions such as fumes, odors, dust, mists, gases, or poor ventilation Employee Acknowledgement: The above information on this description has been designed to indicate the general nature and level of work performed at this client's location. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of associates assigned to this job. Due to nature of defense contracts, US Citizenship is a requirement. As part of our Drug and Alcohol Policy, upon acceptance of any offer of employment, employment will be conditional of successfully passing a background check and required drug testing. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Shipyard experience is required. Please contact our team for more information! Cell: (619)657-5507 or (858)717-1672 Walk-ins Accepted! 1625 Hoover Avenue National City, CA 91950 Office Hours: 8:00 AM-5:00 PM

QC inspectors must possess computer skills and be bilingual. (Pipe Yard) Responsibilities include inspecting incoming and outgoing materials, conducting cycle counts, and maintaining an updated inventory system. Loading and unloading tasks are also required. Qualification: Must have relevant experience. Package Details

We are seeking an experienced QC Representative to join our team in east Houston. The QC Representative reports to the Production Supervisor of their respective warehouse and inspects value-added finished products to ensure the product meets all the customer specifications. Responsibilities: Inspects products to ensure that they meet company and customer quality standards Ensures products meet customer expectations on company objectives Rejects all products and materials that fail to meet quality expectations Completes nonconformance reports when a product does not meet customer quality standards Completes quality reports to document compliance or errors of product inspected Communicates the results of inspections and puts forward corrective suggestions Labels parts as specified by the customer and company quality system Palletizes and/or bundles finished products for shipment to customers Reviews shipments and accompanying documents for quality and accuracy Transports and/or loads finished products (manually and/or using forklifts and overhead cranes) Additional duties as assigned including but not limited to: palletizing, deburring Qualifications: High School Diploma, GED, or equivalent 2+ years of related experience Strong organizational skills and attention to detail Ability to read and understand company and customer drawings Strong math aptitude and ability to accurately utilize measuring instruments such as measuring tape and caliper Extensive product and industry knowledge (carbon steel plate, burning, rolling, and beveling) preferred Professional communication and interpersonal skills Physical Requirements: Ability to lift up to 50 lbs independently on a routine basis and handle materials safely as part of daily job duties. Ability to stand for extended periods and maintain safe body positioning while performing tasks and moving through the work area, including walking on concrete floors and uneven surfaces. Frequent squatting, bending, stooping, reaching, pushing, pulling, and lifting, requiring full-body mobility, balance, and upper- and lower-body strength to perform work safely. Manual agility to operate tools safely and effectively, with regular use of arms, shoulders, and back for lifting, reaching, and positioning tasks. Ability to work safely in a warehouse environment with exposure to noise, dust, moving equipment, and varying temperatures. Ability to demonstrate adequate visual and auditory acuity to safely perform assigned tasks, including but not limited to: identifying potential hazards, reading and/or recording measurements, inspecting materials, and responding promptly to verbal instructions, alarms or hand signals in the work environment.

Job DescriptionDescription: Job Title: Quality Control Inspector III Classification: Full-time, Hourly Non-Exempt Reports To: Quality & Safety Manager, Surface Technologies US ABOUT THE COMPANY: Kymera International: Kymera International is a leading global producer of specialty metal powders, pastes, and granules, catering to industries such as aerospace, defense, automotive, and electronics. Our mission is to drive innovation while adhering to the highest standards of sustainability, operational excellence, and ethical business practices. We are committed to continuous improvement and regulatory compliance on a global scale. Job Overview The Quality Control Inspector III is a senior-level role responsible for leading quality inspections, ensuring compliance with regulatory standards, driving process improvements, and mentoring junior inspectors. This role has significant responsibility for auditing, documentation, and quality assurance across the manufacturing process. Responsibilities • Lead visual and dimensional inspections of mechanical parts, machined components, and thermal spray coatings to ensure full compliance with engineering, customer, and regulatory specifications. • Utilize advanced precision measurement tools including calipers, micrometers, bore gauges, depth gauges, height gauges, dial indicators, surface profile gauges, surface roughness testers, and coating thickness gauges. • Verify dimensions, tolerances, surface profiles, and coating thicknesses per drawings, specifications, and customer requirements. • Conduct root cause investigations, support troubleshooting of coating or machining defects, and drive corrective and preventive actions. • Maintain accurate inspection records, nonconformance reports, corrective actions, and full traceability documentation. • Serve as a primary liaison and support internal and external audits, including ISO 9001, AS9100, and safety inspections. • Verify calibration status, proper use, and handling of all inspection and measurement equipment. • Support FOD prevention, process control, and continuous improvement initiatives. • Review and interpret complex engineering drawings, specifications, and quality plans. • Prepare comprehensive reports on inspection results, trends, quality risks, and corrective actions for management. • Provide training, mentoring, and guidance to Inspectors I and II and other production personnel on inspection techniques and quality expectations. • Collaborate with engineers, machinists, production teams, and suppliers to resolve complex quality issues. • Follow all facility and OSHA safety requirements related to machining operations and thermal spray processes, including PPE, hazard communication, and equipment safety. • Report unsafe conditions, near misses, and potential risks immediately. Requirements: Required Skills and Abilities • Expert proficiency with mechanical and precision inspection tools and techniques. • Advanced blueprint and technical drawing interpretation skills. • Strong analytical, problem-solving, and documentation skills. • Experience supporting audits, performing root cause analysis, and driving corrective actions. • Ability to lead quality initiatives and provide mentorship to team members. • Strong collaboration and communication skills with cross-functional teams. Education and Experience • High school diploma required; associate degree in machining, engineering, or related field preferred. • Minimum 5 years of experience in quality control within a machine shop, repair facility, or manufacturing environment. • Demonstrated proficiency with precision measurement tools, including calipers, micrometers, bore gauges, surface profile gauges, and coating thickness gauges. • Strong working knowledge of ISO 9001:2015 and AS9100 standards. • Thermal spray coatings experience strongly preferred. • Demonstrated leadership experience in mentoring or training quality team members. • Ability to read and interpret engineering drawings, specifications, and quality requirements. • Ability to work independently, lead by example, and communicate effectively in written and verbal formats. • Legally eligible for employment in the United States; must meet US person requirements where applicable. • Ability to pass required background check, drug screen, and health screening. • Possession of a valid driver's license and passport and ability to travel as required. Physical Requirements • Ability to stand, walk, and perform repetitive manual tasks for extended periods. • Strength to lift, carry, push, or pull up to 50 pounds unassisted, repeatedly throughout a shift. • Ability to perform physical tasks, including bending, kneeling, crouching, reaching overhead, and climbing ladders or stairs, as needed. • Capability to pass a respiratory medical evaluation, including hearing and vision exams, and meet all necessary physical qualifications. • Ability to wear and work comfortably in required personal protective equipment (PPE), including gloves and steel-toe boots, for prolonged periods. • Adaptability to work in diverse environments, such as high temperatures, confined spaces, and areas with potential exposure to dust, fumes, and noise. • Coordination and manual dexterity to safely operate machinery, tools, and equipment while maintaining focus on ergonomics and safety. When requested by employees, and when possible, reasonable accommodation may be provided to help individuals with disabilities perform their essential job functions. Kymera is an Equal Opportunity Employer, encouraging diversity in the workplace. EOE: race/color/religion/sex/sexual orientation/gender identity/national origin/disability.

About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you'll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: · Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required. · Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements · Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations. · Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database · Assist in training the production team on quality control measures to improve product excellence · Proposing improvements to the production process · Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements · Updating job knowledge by engaging in educational opportunities and regular training · Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs · Reading and interpreting engineering drawings and electrical schematics. · Comprehension and operation of basic electrical measuring equipment. · Collecting and compiling statistical quality data · Assisting in the development of test methods and inspection plans · Determining the causes of product defects and reworks · Verifying all equipment is calibrated correctly · Inspection of welded components · Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels. · Coordination and Support of customers during the FAT process. Requirements · Associates degree required · One year of experience with electrical inspection and testing required · One year of experience with fabrication and welding inspection required · Good written and verbal communication skills required · Excellent problem-solving and analytical skills required · Keen attention to detail required · Basic computer and math skills to calibrate and measure specifications required · Ability to use measuring devices such as gauges, meters, calipers, and computers required · In-depth understanding of company standards required · Up-to-date knowledge of federal and industry standards, UL codes, and best practices required · Understanding of target market and consumer needs required · Blueprint and electrical schematic reading capabilities required · Documentation and reporting skills required · Teamwork and collaboration required · Growth mindset with the ability to accept challenges required · Ability to pass physical, drug, driving, and background check required · Ability to physically push, pull, and lift 50lbs or more required · Ability to sit, stand, and walk for four-plus hours at a time required · Alignment with company core values required Benefits Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family) 401K and bonus Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

Job DescriptionJob Title: QC Inspector Employment Type: Full-Time Shift: 2nd Shift, may require some flexibility and have the ability to work an occasional Saturday. Company Overview Ultra Corpotech Inc. is a leading manufacturing company that takes pride in producing high-quality products with precision and efficiency. We are committed to a culture of safety, innovation, and growth. Join our team and contribute to our ongoing success as we continue to deliver exceptional products to our clients. Position Overview The QC Inspector will be responsible for ensuring that products meet established quality standards before reaching our customers. This role involves inspecting products at various stages of production, identifying defects, and ensuring compliance with company specifications and regulatory requirements. The ideal candidate will have strong attention to detail, excellent problem-solving skills, and a commitment to maintaining high-quality standards. Key Responsibilities Perform inspections on raw materials, in-process items, and finished products to ensure they meet quality and safety standards Use measurement tools (e.g., calipers, micrometers, gauges) to verify product dimensions and specifications Conduct visual inspections to identify defects such as cracks, deformations, or surface imperfections Document and report inspection results, including any non-conformities, in accordance with company procedures Work closely with production teams to address quality issues and implement corrective actions Maintain accurate inspection records and prepare quality reports Ensure compliance with ISO or other quality standards applicable to the industry Support internal and external audits as needed Perform other duties as assigned by a supervisor, lead person or management Qualifications High school diploma or equivalent. Technical training or certification in quality control/inspection is a plus 3-5 years of experience in quality control or a similar role, preferably in a manufacturing or production environment Skills Proficient in using inspection tools and equipment (e.g., calipers, micrometers, gauges) Strong knowledge of quality control standards and techniques Ability to read and interpret technical drawings and specifications Excellent attention to detail and organizational skills Basic computer skills, including familiarity with MS Office and quality management software Benefits Competitive salary based on experience Health, dental, and vision insurance Paid time off and holidays Opportunities for career advancement and professional development Retirement plan options 401(k) Ultra Corpotech Inc. is an equal opportunity employer and encourages applications from all qualified individuals. We thank all applicants for their interest; however, only those selected for an interview will be contacted. Please note that all offers of employment are contingent upon successful completion of a background check and drug screening. Ultra Corpotech Inc. is committed to maintaining a safe and productive work environment and conducts pre-employment screenings to ensure our standards are met.

/OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials according to Internal and Customer requirements. The QC inspector will also be responsible for creating and documenting inspection results, taking measurements, and tracking non-conforming product. ESSENTIAL FUNCTIONS Reports to QC Leadperson and/or Supervisor for daily activities and workload. Perform and document dimensional and visual checks of production parts and incoming goods and creating inspection reports to internal and customer requirement. Responsible for notifying Quality Control Leadperson and/or Supervisor, in addition to Manufacturing and Engineering personnel, of non-conforming goods. Inspect customer supplied material, per specified drawings. Inspecting and gathering product documentation, final document packets, material heat reports as required. Inspection of buy-out materials. Make First Article inspection and document inspection results. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminating waste. Maintain 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Leadperson or QC Supervisor. Other Requirements An annual vision examination is required. Must have experience with the use of measuring instruments in the completion of dimensional inspections. (Calipers, micrometers, CMM, Pi tapes, Optical comparators, etc.) Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials and manufactured products. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 2-3 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice.

Petroleum Inspector Camin Cargo Control is a value-based organization that stands for more than just providing mission critical services. The Company's core principles of fairness, integrity and excellence have been the foundation upon which the organization was built. Fairness: Approach situations in an open, consistent, and ethical manner with fairness, sincerity, and honesty Integrity: Create an empowered, engaging, and accountable culture focused on client service Excellence: Always strive for excellence through continuous process improvement, best practices to achieve superior results and the creation of opportunities to benefit all stakeholders Position Summary Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. • Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. • Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours • Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours • Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours • Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours • Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours • Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour • Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours • Sitting Weight N/A-Duration/Day Up to 6 hours • Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed, or used without prior written consent from Camin. All rights reserved.

Job Title: QC Inspector Lead Company: All Tex Personnel Location: Houston, TX Schedule: 7:00 AM 7:00 PM (Rotating Shifts) Employment Type: Full-Time All Tex Personnel is seeking a QC Inspector Lead to oversee quality control operations in an industrial setting. The ideal candidate will have experience in inspection procedures, documentation, and quality assurance practices. This role requires attention to detail, leadership skills, and the ability to work rotating shifts. Responsibilities Conduct inspections of materials and finished products to ensure compliance with specifications Document inspection results and maintain accurate records Lead and support a team of QC inspectors Collaborate with production teams to resolve quality issues Ensure adherence to safety and regulatory standards Recommend process improvements to enhance product quality Preferred Qualifications Prior experience in industrial quality control Familiarity with inspection procedures and documentation standards Strong communication and leadership skills Ability to work 12-hour rotating shifts Bilingual (English/Spanish) is a plus Package Details

Job Description About Us: Panelmatic, Inc. was founded in 1957 in Youngstown, OH to serve manufacturing industries with the design and build of custom electrical, instrument, and pneumatic control panels. Our business has sufficiently grown over the years to support expansion for our clients. We have produced control packages for many of America's top corporations in the chemical, environmental, food, pulp and paper, rubber, petroleum, pharmaceutical, glass, metals, and utilities industries. We also deliver equipment for use worldwide. Our rigorous methodology assures compliance with domestic and international standards. We can meet the needs of our diverse clientele from start to finish through sales, design, fabrication, testing, and delivery. Since 1957, we have been known for our high-quality, custom-built control packages, our comprehensive service, and our technological and manufacturing expertise. This expertise assures you of our ability to handle the largest and most complex packages quickly and efficiently. Job Summary: Panelmatic is seeking a detail-oriented experienced Quality Control Inspector. In this role, you'll play a key role in ensuring that all products meet our established requirements for reliability and workmanship, as well as other quality control program standards. Job Duties: · Inspecting output samples using industry-appropriate methods, such as comparing to standards, measuring dimensions, and examining functionality, as well as electrical testing as required. · Checking that the assembly or production line adheres to standards and procedures and complies with legal requirements · Reviewing blueprints, electrical schematics, and specifications to compare to produced goods and generating an inspection report to document all deviations. · Recording inspection results by completing reports, summarizing re-works and wastes, and inputting data into a quality database · Assist in training the production team on quality control measures to improve product excellence · Proposing improvements to the production process · Monitoring the use of equipment to ensure it is safe and discard any that do not meet requirements · Updating job knowledge by engaging in educational opportunities and regular training · Keeping measurement equipment operating accurately by following calibration requirements and calling for repairs · Reading and interpreting engineering drawings and electrical schematics. · Comprehension and operation of basic electrical measuring equipment. · Collecting and compiling statistical quality data · Assisting in the development of test methods and inspection plans · Determining the causes of product defects and reworks · Verifying all equipment is calibrated correctly · Inspection of welded components · Understanding the functionality of basic electrical components for use in industrial electrical cabinets/panels. · Coordination and Support of customers during the FAT process. Requirements · Associates degree required · One year of experience with electrical inspection and testing required · One year of experience with fabrication and welding inspection required · Good written and verbal communication skills required · Excellent problem-solving and analytical skills required · Keen attention to detail required · Basic computer and math skills to calibrate and measure specifications required · Ability to use measuring devices such as gauges, meters, calipers, and computers required · In-depth understanding of company standards required · Up-to-date knowledge of federal and industry standards, UL codes, and best practices required · Understanding of target market and consumer needs required · Blueprint and electrical schematic reading capabilities required · Documentation and reporting skills required · Teamwork and collaboration required · Growth mindset with the ability to accept challenges required · Ability to pass physical, drug, driving, and background check required · Ability to physically push, pull, and lift 50lbs or more required · Ability to sit, stand, and walk for four-plus hours at a time required · Alignment with company core values required Benefits Medical, dental, vision, HSA, term life, AD&D, STD, LTD 100% medical premium paid for by Panelmatic for the employee-only level medical coverage 80% paid by Panelmatic and 20% paid for by the employee on all other level medical coverage (i.e. employee plus child, employee plus spouse, family) 401K and bonus Scholarships, educational reimbursement, paid volunteerism, and paid personal and professional development provided PTO and paid holidays provided Career advancement opportunities Competitive wages Family-friendly environment with average employee tenure above five years

SHIFT: Day /OBJECTIVE The QC Inspector will be responsible for approving incoming, in-process, and finished materials for defects. The QC inspector will also be responsible for documenting inspection results, taking measurements, and tracking defects. ESSENTIAL FUNCTIONS Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions Reports to QC Lead person for daily activities Perform and document dimensional and visual checks of production parts and incoming goods. Responsible for notifying Quality Control Lead person, in addition to Manufacturing and Engineering, of non-conforming goods. Inspect customer-supplied inserts, per drawings supplied. Ring check and approve production tryouts to engineered tolerances. Inspection of buy-out materials. Make first-piece inspection and document ring checks. Shipping certifications. Log and verify traceability packets. Implement and practice Lean Manufacturing tools including 5S, increased productivity, and eliminate waste. Maintain a 5S checklist as it applies to your work area. Perform other related duties assigned by QA Manager or QC Lead person Other Requirements An annual vision examination is required. Must be able to use measuring devices. Must follow company safety procedures at all times. Must have average reading, writing, and mathematical skills. Must be able to visually inspect materials. Must be able to lift 50 lbs., 3 ft. high. Required Education and Experience High school diploma or equivalent, with 4-5 years of work-related experience. Work Environment This job operates in an office and manufacturing environment. This role routinely uses tools and other such equipment during the course of the job duties. Provided Personal Protective Equipment, as well as steel-toed boots or shoes, must be worn at all times. Physical Demands Moderate walking and climbing Physically able to conduct inspections and carry equipment used for inspections Must be able to lift up to 25 pounds at a time While performing the duties of this job, the employee is regularly required to, stand, sit; and stoop Regular, predictable attendance is required Position Type/Expected Hours of Work This is a full-time position, and hours of work and days are Monday through Friday. Occasional evening and weekend work may be required as job duties demand. Travel None EEO STATEMENT Utex Industries is an equal employment opportunity employer and shall make all employment-related decisions without regard to race, color, national origin, ancestry, religion, creed, age, sex, sexual orientation, marital status, military or veteran status, and/or any other status or condition protected by applicable federal, state, or local law. Other Duties Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties, or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time with or without notice.

Job DescriptionPetroleum Inspector - II Performs sampling, pipeline transfers, inventories and barge inspections including line condition surveys. Performs vessel inspections under the direct supervision of a Senior Inspector. Certifies that field assignments conform to company policies and procedures as well as job specific instructions supplied by the Operations Department. As company field representative, acts in a professional and dignified manner to maintain the company's respected and trusted reputation. Minimum Requirements Requires a High School Diploma (or equivalent) with good math skills and a minimum three months of inspection experience. Must complete Inspector level training and pass corresponding theoretical tests and field evaluations. Must have or obtain IFIA certification after gaining at least six months of industry experience. Must maintain a valid Transportation Worker's Identification Card (TWIC). Possess and maintain a vehicle in good working order, a valid driver's license, vehicle insurance and registration. Must be dependable, able to work independently and be able to effectively communicate and maintain professional relationships with numerous clients (i.e., terminal and vessel/barge personnel). Must pass company defined physical requirements. Must meet and maintain site-specific requirements mandated by customers and/or terminals to have access to all facilities. Fitness for Duty - Physical Demands Workday may consist of 8-12 hours; however, this can vary day to day or shift to shift. Much of the work is performed outdoors, wearing full Personal Protective Equipment (PPE) and could include possible exposure to high and low temperatures for prolonged duration of time. Work may be performed during day or nighttime hours and may involve working alone. All times listed below are approximate. Maximum Lift-Floor to knee; Knuckle to waist; Waist to shoulder Weight Up to 45 lbs.- Duration/Day Up to 2 hours. Walking- Weight Up to 45 lbs. -Duration/Day Up to 6 hours Pushing-Pulling Weight Variable-Duration/Day Up to 2 hours Carrying Weight Up to 45 lbs.- Duration/Day Up to 4 hours Ascend/Descend Ladder/Stair Weight Up to 45 lbs.- Duration/Day Up to 2 hours Extended Reach Weight Up to 45 lbs.- Duration/Day Up to 1 hour Standing Weight Up to 45 lbs.- Duration/Day Up to 6 hours Crouch/Squat/Knee Weight Up to 45 lbs.- Duration/Day Up to 1 hour Tool use Weight 5-8 lbs. Duration/Day Up to 4 hours Sitting Weight N/A-Duration/Day Up to 6 hours Driving- Weight N/A- Duration/Day Up to 4 hours All are required to perform this position Responsibilities As instructed by the Operations Department and under the strict guidelines described in the Inspection and ASTM/API manuals: Acts as a Company representative in the field. Must be able to perform duties and responsibilities as per company policies and procedures. Maintains regular contact with Operations Department to receive work orders and schedules. Effectively communicates all aspects of assigned job duties. Maintains regular contact with Operations Department, terminals, and vessel to avoid delays or conflicts. Obtains, labels and transports samples to the laboratory in a timely manner as required by each specific job assignment. Maintains assigned inspection equipment in good working order and ensures equipment is properly calibrated and stored. Measures (gauge and temperature) products and performs all required field calculations per the API Standards, completes all required field documentation and submits reports to the Operations Department in a timely manner. Performs specialized inspection services such as loss control, wall washings or confined space entry upon receiving required training. Assists in the training of Probationary and Junior Inspectors. This document contains Confidential and Proprietary information which is the property of Camin Cargo Control. None of the information contained herein may be disclosed, reproduced, distributed or used without prior written consent from Camin. All rights reserved.