Quality inspector jobs in Cheyenne, WY

Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form's 8130-3 and 337's when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer's Instructions for Continued Airworthiness and Air Methods Repair Station Manual. Essential Functions and Responsibilities include the following: * Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article's permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag * Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture's programs, and the owner / operator's (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier's FAA approved inspection manual. * Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing "OK to Close" for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight. * Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner. * Support production and management with failure and nonconforming material data recording and reporting. * Identify and communicate continuous improvement opportunities for the quality program. * Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA. * Supervise part incoming and receiving inspections. * Create and inspect aircraft equipment lists and weight and balance records. * Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits. Additional Job Requirements * Regular scheduled attendance * Indicate the percentage of time spent traveling - 5% Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position. Education & Experience * High school diploma or general education degree (GED); and three to five years' technical rotor wing experience and/or training; or equivalent combination of education and experience. * Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives. * Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification * Previous experiences in a FAA Certified Repair Station. * Proficient with FAR's and ability to perform complex research of Federal Regulations. * Commitment to airworthiness and qualify of aircraft parts approved for return to service. Skills * Individual diversity and adaptability. * Excellent written and verbal communication * Must be able to work autonomously and to prioritize tasks. Computer Skills * Proficient with Microsoft Suite, including Word, Excel, and Outlook Certificates, Licenses, Registrations * A&P Certificate required * FAA Inspection Authorization (IA) preferred. * FCC GROL License preferred. * Abaris composite training or equivalent preferred. Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Minimum pay USD $64,445.00/Yr. Maximum Pay USD $93,575.00/Yr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Full-time Description A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times). Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Estimated application closing date: 10/31/25 Requirements Qualifications Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Powerplant license. Experience Requirements: Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Three years business/corporate aircraft maintenance experience Other Requirements: Clean driving record. Able to pass a background check. Ability to pass a drug screening test. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ideal Candidate Will Possess the Following Skills: Attention to detail. Sincere desire to assist others. Able to develop a friendly rapport. Persistence in the face of obstacles. Professional in appearance and mannerisms. A willingness to take on responsibilities and challenges. Being reliable, responsible, and dependable, and fulfilling obligations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. Being sensitive to others' needs and feelings and being understanding and helpful on the job. Guiding oneself with little or no supervision and depending on oneself to get things done IAW acceptable techniques and methods. Maintaining composure, keeping emotions in check, controlling anger, and avoiding aggressive behavior even in very difficult situations. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station. Accepting criticism and dealing calmly and effectively with high stress situations being open to change (positive or negative) and to considerable variety in the workplace. Salary Description $34-$45/hr DOE

Full-time Description This position will play a key role in programming and running CMM's inspections for parts. May be needed to support other PMP Locations outside of your current home base. Support Lead CMM Position in Cody, Wyoming, when required assist PMP CMM Operators / Programmers throughout the Organization. Inspects general machining operations during production sequence to ensure conformance of all parts with the customer specifications and within AS91002C certification standards. Requirements ESSENTIAL FUNCTIONS · Develop new CMM inspection programs and modify existing programs as needed. · Review GD&T blueprints, engineering specifications, and job orders to ensure production specifications are met. · Utilize precision measuring instruments and aids to measure dimensions and layout of machined parts, castings, jigs, fixtures, and templates. · Verify machine set-up and ensure the conformance of first-run production work to customer specifications. · Perform spot checks and random audits of machined parts during production sequences. · Initiate nonconformance reporting when necessary and certify product compliance when required. · Identify opportunities for process improvements to enhance quality control. · Conduct regular quality assessments on incoming materials and outgoing products. · Collaborate with the team and perform additional duties as assigned. Education/Skills/Abilities · Minimum of three (3) years of experience in an aerospace manufacturing environment, with a focus on quality control is preferred. Alternatively, a combination of education and related aerospace experience resulting in a comprehensive understanding of manufacturing practices, procedures, and equipment, with a minimum of three (3) years of inspection and CMM programming experience. · Proficiency in operating CMM, visual CMM, and various other measuring equipment. · Preferred certification in GD&T. If not certified, the employee must complete certification within nine months of hire. · Strong knowledge of quality systems, technical understanding of parts, and advanced blueprint reading skills. · Ability to create standard inspection reports and first article inspection reports. · Excellent problem-solving and analytical skills with independent thinking ability. · Effective communication and people skills, including active listening. · Professional demeanor with an elevated level of integrity and demonstrated stability. · Purposeful mindset and ability to work with diligence and accuracy. · Strong organizational and time management skills, with the ability to prioritize tasks and work efficiently in a demanding environment. · Proficiency in using computers and familiarity with Microsoft Office and other relevant software. · Willingness to embrace new techniques and continuously upgrade skills in the quality and manufacturing fields. · Ability to maintain a positive company image and work well in a team environment, fostering healthy working relationships. · High school graduate with a focus on math and trigonometry. · All applicants must be U.S. persons as defined by the International Traffic in Arms Regulations (ITAR). Proof of eligibility to work in the United States is required. · Compliance with the federal Form I-9, Employment Eligibility Verification, is mandatory. · Precision Machined Products uses E-Verify to verify the work authorization of all new hires

Type: Non - Exempt Work Schedule: Full Time, Day Shift. On-call work may also be required based on operational needs. Compensation: $37.91 - $37.91 /hourly dependent on experience Deadline: December 31, 2025 Benefits: Tessera is proud to offer a comprehensive compensation and benefits package to our eligible part-time and full-time employees. Full-Time benefits of a Quality Control Safety Inspector at Tessera include: Medical, Dental, Vision, 401(k) retirement plan, Life & Short-Term Disability Insurance $8.78/hr Health and Welfare Benefit Flexible Spending Accounts for both medical and dependent care 11 paid federal holidays, accrual of 12 paid days of vacation at the start of employment, paid sick leave Potential shared earning bonus Tuition assistance is available after 1 year of employment and potential scholarships for qualified dependents Professional development, certifications, and training opportunities Verizon wireless discount Employee Assistance Program (EAP), and an engaging wellness program Public Service Loan Forgiveness eligibility for full-time employees Tessera is dedicated to “Creating Opportunities for People with Disabilities” by hiring and supporting individuals with disabilities as well as veterans with disabilities. We take pride in our purpose-driven culture, our core values - Inclusion, Partnerships, Integrity - and our commitment to providing a safe and respectful work environment to our employees. Tessera is seeking a passionate and detail-driven Safety and Quality Control Inspector to support USAFA BMC operations. This vital role oversees safety, environmental management, ISO 9001 compliance, and quality assurance programs. Operating independently while collaborating with experts locally and at the home office, the inspector will help uphold Tessera's commitment to excellence, integrity, and continuous improvement-affirming that every contribution matters and every voice is valued. Typical duties include but are not limited to: Develop, implement, and monitor safety, quality, and environmental programs aligned with ISO 9001 standards and regulatory requirements. Coach and support personnel involved in local compliance efforts, fostering best practices and accountability. Coordinate and deliver training programs such as defensive driving, lockout/tagout, confined space entry, and fire protection. Conduct inspections, audits, and fire drills to ensure operational compliance and readiness. Investigate incidents and nonconformance issues, and prepare technical reports and corrective action plans. Draft and maintain SOPs, work instructions, and local operating procedures for EH&S functions. Collaborate with environmental offices and internal teams to manage SDS documentation and work order execution. Utilize systems such as Maximo, DoD e-Tools, and ESMIS to monitor data accuracy and identify trends. Review maintenance records and inspection files to detect recurring issues and recommend improvements. Provide independent assessments and recommendations to optimize site safety, quality, and environmental processes. Qualifications: Experience in safety, quality control, and environmental compliance (preferably in military or government contracts). Strong knowledge of OSHA, USACE, and ISO 9001 standards. Proficiency in data systems such as Maximo and DoD platforms. Excellent communication, analytical, and problem-solving skills. Ability to work independently and collaboratively across teams. Physical Requirements: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance. The physical demands of this position may be reasonably accommodated for individuals with disabilities to perform the essential functions on a case-by-case basis. May be required to reach, kneel, walk, stand, and use repetitive motion for several hours at a time based on position duties. Work may require repetitive motion, reaching, lifting, kneeling, and walking. Standing or sitting for several hours at a time, climbing in and out of a vehicle, and up and down stairs may also be required. Must have the perseverance to work effectively under pressure for extended periods of time. Requirements: A valid state driver's license is required with the ability to obtain and maintain coverage by Tessera's insurance. Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** Must be able to obtain and maintain applicable security clearances and installation access. A background check and E-Verify will be conducted for this position. Union Affiliation: This position is represented by the International Brotherhood of Electrical Workers (IBEW), Local 113, and the United Association (UA), Local 58. *** Access to a federal military installation requires a REAL ID-compliant driver's license or an acceptable alternative, such as a U.S. passport or military ID, in accordance with the REAL ID Act. Please visit this website for more information: **************************** To Apply: Visit our website at *************** to complete an application. Current Employees: need to log into their Workday to apply through the Jobs Hub . Please reach out to your Recruiter if you need assistance. Tessera is a national non-profit, government contractor that is dedicated to “Creating Opportunities for People with Disabilities” through hiring and supporting individuals with disabilities and veterans with disabilities. We take pride in our mission-focused culture, our Core Values, Diversity, Partnership, Commitment, Integrity, and Quality, and our dedication to providing a safe and respectful work environment to our employees. Individuals with disabilities are encouraged to apply. Tessera is here to help you with the recruitment process. If you require an accommodation or support, please contact us at ************** ext. 349, or email **********************. Tessera is an Equal Opportunity Employer - Women/Minority/Veteran/Disabled - Tessera participates in E-Verify

Conexon is a rapidly growing company working with Rural Electric Cooperatives to build advanced fiber to the home (FTTH) networks nationwide. We are currently looking for a Fiber Construction QC Inspector to join the Construction Management team. We are looking for qualified candidates for onsite quality control inspection that have experience in all facets of constructing a FTTH network and is looking for experience in telecommunications construction. This candidate should have experience in FTTX, FTTH, FTTP, Fiber, telecommunications or broadband projects. Fiber Construction OC Inspectors must be organized and have good written and verbal communication skills to communicate with clients, cooperative members, and co-workers. Current opportunity includes work onsite with some travel required. Requirements Construction Quality Control Inspector duties: Complete ride out edits Understanding of FTTH plant design Quality control Inspection and contractor compliance Reconciliation of close out packages Cost control for the client and Conexon Understanding of NESC standards Production verification and invoice reconciliation with production General duties: Assist in promotion and sales of Conexon services Participation in weekly client conference calls Evaluate and advise on FTTH construction techniques Weekly status reporting General computer skills Company Benefits Include: Paid time off Full benefits (i.e. health, dental, and vision) Life insurance Long-term and short-term disability insurance Retirement benefits Salary Description $27-$35/hr

Quality Inspector Duration: 6 month (180 days) Extension as needed per customer Frequency: 6-8-hrs per week - Part Time (back-up for primary inspector) Job Description: The quality inspector shall travel to the supplier facility to perform visual and dimensional inspections on manufactured parts, assemblies, and / or sub-assemblies. Parts will be inspected to engineering drawings, customer purchase order(s), industry standards, and specifications. The inspector will be required to report inspection accept / reject information directly to the customer via web application. Requirements: Candidate must have practical experience performing in-process and final inspections on complex machined parts, assemblies, and / or sub-assemblies. The inspections will be performed to engineering requirements specified per ANSI Y14.5 - Geometric Dimensioning and Tolerance (GD&T) or equivalent standard. Must have the ability to read / interpret engineering drawings and Purchase Orders (POs). The candidate must have experience using various mechanical inspection tools, such as micrometers and calipers. Experience performing First Article Inspections (FAIs) in accordance to the AS9102 standard and knowledge is required. Ideal candidate will have a minimum of five years experience performing inspections in aerospace or military / defense manufacturing with proficiency using Microsoft Word and Excel. Candidate should be computer savvy and own a laptop for this assignment. Unless a VTR Contractor can be identified. The identified resource will be working as an independent contractor (1099) and required to obtain an LLC.

Job Description MacKay Sposito is seeking a full time Geotechnical Lab/CMT Technician I to join our Lab Services team in Fort Collins, CO. We aspire to bring talented individuals to join us as we grow our impact on the clients and communities we serve through excellence in design, planning and project execution. This Technician will be responsible for performing quality control services, including testing and observation of constructed civil works. The primary objective is to identify defects in products before completion and release. This role involves determining the characteristics of constructed materials in relation to project plans and specifications while ensuring compliance with safety procedures. We offer a comfortable and collaborative work environment; we're serious about our work - but we're serious about fun, too. If that sounds good to you, let's talk. Key Responsibilities: Comply with all safety procedures and regulations. Conduct compliance testing as per established procedures. Perform testing and observation of materials and structures to ensure quality standards. Document findings and generate reports for review. Work collaboratively with team members and contractors to maintain quality control. Perform other related duties as assigned by management. Minimum Qualifications: High school diploma or GED. 0-3 years of related experience. Proficiency in Microsoft Excel, Word, and Outlook. Valid driver's license with a clean driving record. Preferred qualifications: WAQTC Certification ACI Field Tech. 1 Certification Experience within the construction industry Technical skills and abilities: Read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Write routine reports and correspondence. Speak effectively before groups of customers or employees. Perform calculations involving proportions, percentages, area, circumference, and volume. Apply concepts of basic algebra and geometry. Follow detailed written and/or oral instructions. Must be able to work independently with minimal supervision. Strong organizational and time management skills. Why join the MacKay Sposito team? A people-first culture - We are dedicated to our employees and their families. We want to do what's best for them, and their well-being helps drive our business decisions. An excellent reputation - Through our 50-year history, MacKay Sposito has built and maintained an excellent reputation in our community, and with our clients and business partners. You'll be joining a team with a strong foundation and reputation that you can be proud to be part of. A focus on community - MacKay Sposito and our employees believe in giving back to the communities we serve. As a firm, we support several local organizations focusing on community pillars surrounding veterans and the youth. Our team members serve in volunteer positions as commissioners, committee and board members, youth coaches, and participate across a broad range of initiatives. Our Values At MacKay Sposito, we're serious about our work, but we don't take ourselves too seriously. We have a unique and diverse mix of employees who enjoy each other's company. In addition to having first-rate technical skills, we search out people who are friendly, honest and dedicated to their work. We know work isn't only about who you work for, it is also about what you do and how you do it. Led by the strength of our values and a culture shaped by employee ownership, we network with each other, build on each other's contributions, and collaborate to make great things possible. We believe firmly in the principle of constructive candor - always telling the client everything they need to know to make fully informed decisions. By creating a positive, committed and supportive environment, we're able to challenge our people to be the best that they can be, and to celebrate every success. Who We Are With more than 50 years of experience, MacKay Sposito is a multidisciplinary firm based in Vancouver, Washington, specializing in public works, energy, and land development. Our passionate team focuses on building lasting relationships through quality work, creative design, and collaboration. We offer civil engineering, land surveying, environmental science and permitting, landscape architecture, and construction management and inspection services. With the addition of our subsidiary, Riparia Environmental, we now deliver a full suite of services from design and engineering to maintenance and environmental compliance. Together, we balance development with environmental stewardship and sustainability. Please note that the salary information shown below is a general guideline only. Salaries are based upon candidate experience and qualifications, as well as various market and business considerations. The wage range for this position is $19.00 - $22.00/hour depending on experience. Full time employees receive a well rounded benefit package including access to our company sponsored Medical (including an HSA High Deductible option), Dental, Vision, FSA, and Supplemental Life Insurance plans. We also offer 100% company paid Life Insurance, Short Term Disability, and Long Term Disability coverage. Employees are eligible to participate in our company 401k plan with up to a 4% match. Additionally, employees also receive paid vacation time, paid sick time, and 11 paid holidays and are able to participate in employee ownership options. MacKay Sposito pays for expenses associated with licensure as well as annual profit sharing bonuses. Employment requires passing a pre-employment background check and drug screen. As a federal Contractor we participate in E-Verify and are proud to be an Equal Employment Opportunity Employer. Open until filled. Powered by JazzHR f2Du1gYUAQ

Job Description Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

Full-time Final QC Inspector We are seeking a highly skilled and detail-oriented Full-time Final QC Inspector to join our quality assurance team in Longmont, CO. The ideal candidate will have extensive experience in quality control inspection, with a focus on electronic assemblies and cable harnesses. This position requires proficiency in IPC-A-610 and IPC/WHMA-A-620 standards, as well as a strong background in quality inspection techniques. Shift: Monday - Thursday 7 am- 4:30 pm, Fridays 7 am -12 pm OT Schedule: Monday- Thursday, 6 am- 5:30 pm, Friday 6 am- 2 pm Pay: $21-25/hr (DOE) Key Responsibilities Perform final quality control inspections on electronic assemblies, printed circuit boards (PCBs), and cable harnesses to ensure compliance with IPC standards and customer specifications Utilize visual inspection techniques and measurement tools to identify defects, non-conformities, and quality issues Conduct thorough examinations of products at various stages of the manufacturing process Verify that all components and materials meet required specifications and quality standards Document inspection results, maintain accurate records, and prepare detailed reports Collaborate with production teams to address quality concerns and implement corrective actions Ensure compliance with company policies, industry standards, and regulatory requirements Communicate effectively with cross-functional teams Qualifications 2+ years of experience in quality control inspection, preferably in the aerospace industry IPC-A-610 Certification preferred IPC/WHMA-A-620 Certification preferred Proficiency in quality inspection techniques and methodologies Strong attention to detail and ability to identify subtle defects and non-conformities Excellent written and verbal communication skills Ability to read and interpret technical drawings, schematics, and specifications Proficiency in using measurement tools such as calipers, micrometers, and microscopes Familiarity with industry standards and regulations (e.g., ISO 9001, AS9100) Strong problem-solving and analytical skills Ability to work independently and as part of a team Proficiency in Microsoft Office suite (Word, Excel, PowerPoint) Call Hannah at 720-716-5732 to learn more! #INDHE

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as a Quality Control Inspector at West Star: The Quality Control Inspector maintains West Star Aviation's quality standards in accordance with the West Star Repair Station/Quality Control Manual and the Federal Aviation Regulations. This will be accomplished by working with Aircraft Technicians, Program Managers, Team Leaders, Quality Control and Quality Assurance Inspectors. You will be ESSENTIAL to many FUNCTIONS including: Maintain West Star Aviation's quality standards by inspecting technician's work, performing “ok to close”, and auditing. Ensure proper sign-offs in Corridor as part of the inspection process. Participate in daily review meetings. Assist with Airframe Inspections Following up with all departments to get steps signed off, inspected, and closed so airframe squawks can be completed. Help manage Equipment Removal and Installation Log. Assist QA Department with log research issues to help clear items that are in question. Daily contact at aircraft with Team Leaders to ensure quality standards are met. Maintain customer oriented work habits. Effectively and clearly communicate (i.e., speak, write, read) in English Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent. A&P License or Repairman Certificate will be required. Inspection Authorization (IA) rating is recommended. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not required Your Experience : Familiar with all facets of manuals required to maintain aircraft. Thorough knowledge of FAA regulations. 3 years turbine aircraft inspection experience with return to service authority required. Customer service experience recommended. Follow all company rules and FAA regulations during performance of duties. Maintain customer oriented work habits for oneself and the department.

Job Description Inspection & Packaging Lead (1st Shift) This position reports directly to the Inspection and Packaging Supervisors as well as the VILP Manager. The role is responsible for general support of the Visual Inspection, Labeling, and Packaging of finished sterile compounds. The Lead is responsible for ensuring the accuracy for label reconciliation, document completeness and correctness of all product identification. Why Join Leiters Health? Are you passionate about making a real impact in the pharmaceutical industry? Do you thrive in a collaborative, innovative environment where your skills and ideas are valued? Look no further - Leiters Health is seeking talented individuals like you to join our dynamic team! At Leiters Health, we're not just another pharmaceutical company - we're pioneers in the field, dedicated to delivering high-quality compounded sterile products and outsourced solutions to healthcare providers nationwide. Our commitment to excellence and patient safety is at the core of everything we do. Innovative Culture: Be part of a forward-thinking company that encourages creativity, welcomes fresh ideas, and fosters an environment of continuous improvement. Meaningful Work: Contribute to a purpose-driven organization dedicated to providing critical medications and healthcare solutions that positively impact patients' lives. Professional Development: Access ongoing training, mentorship, and growth opportunities to expand your skills and advance your career within a rapidly growing industry. Cutting-Edge Technology: Work with state-of-the-art facilities and advanced technologies, staying ahead of the curve in pharmaceutical manufacturing. Collaborative Environment: Join a team of passionate individuals who are dedicated to teamwork, support, and mutual success, fostering a culture of inclusivity and collaboration. Who We're Looking For: We're seeking enthusiastic individuals who are driven, adaptable, and passionate about contributing to a mission-driven organization. Whether you're an experienced professional or just starting your career, Leiters Health provides an environment where your skills and talents will be recognized and appreciated. Sound like you? Apply today! Essential Functions: Lead and perform the line/area clearance of the visual inspection or label, and packaging activities. Review of batch record during and end of visual inspection, label, and packaging activities. Assist Inspection & Packaging Supervisors in overseeing employees who are responsible for visual inspection/labeling/packaging of finished goods. Collaborate with Inspection & Packaging Supervisors to ensure timely visual inspection and labeling of products to meet scheduled batch release dates. Ensure that training on SOPs and processes remains current. Analyze Production efficiencies downtime and waste. Lead teams to improve the results. Write investigations and CAPA actions for non-conformances in the department. Work with QA to quickly resolve any variance or document errors so that product may be released on time. Lead Problem Solving activities. Assist with maintaining batch and label inventory and managing daily staffing for visual inspection and labeling. Other duties as assigned. Supervisory Responsibilities: Lead a team of Associates, providing direction, support, and training. Provide a positive and collaborative work environment through effective communication and accountability, escalating conflict promptly and fairly. Experience and Necessary Skills: 1-year previous leadership experience or comparable experience preferred. Minimum 1 years' experience in aseptic processing preferred. Knowledge of cGMP guidelines/standards. Associate's degree or equivalent, relevant experience. Demonstrated written and oral communications skills including strong presentation skills. Excellent organizational skills and results oriented. Strong results orientation. Strong Microsoft Office skills are essential, proficient in the use of spreadsheets and word processing programs Ability to effectively bring others together and reconcile differences. Able to lift up to 50 lbs. and stand for extended periods when required Must pass an eye exam confirming 20/20 near vision corrected (with contacts or glasses) or uncorrected Must pass an eye exam confirming the ability to accurately perceive color Benefits: 100% employer paid medical plan. Dental & Vision insurance options including FSA & HSA Employer Paid Life Insurance & Employee Assistance Program Short Term & Long-Term Disability Insurance Up to 4% 401K Matching (100% vested on day one!) Generous Paid Time Off Options - vacation, sick, paid leave and holidays! $5,250 Annual Tuition Reimbursement after 6 months $1,000 Referral Bonus Program with no limit Eligible for annual bonus program Shift: Monday-Friday 6a-4:30p Timeline: We will be accepting applications on an ongoing basis until position is filled. We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity or expression, pregnancy, age, national origin, disability status, genetic information, protected veteran status, or any other characteristic protected by law. *Please note that we do not work with third-party recruiters or agencies for this position. If you are a qualified candidate and wish to apply for this job, please do so directly through our official application process. We appreciate your understanding and cooperation in this matter.

PCB Manufacturing | QC Inspector Scope: Inspect and evaluate final products to ensure compliance to customer requirements prior to delivery. Essential Job Function: Be able to complete AS 9102 Reports Perform Final Inspection on finished product to ensure compliance to customer requirements. Read customer drawings Perform measurements with measurement tools such as calipers, micrometers, and pin gages. Perform rework as appropriate, which may include mask touch-up, material removal with an x-acto knife, burnishing, soldering irons, final finish brush plating, sanding Verify acceptability of rework after completion Identify and mark non-conforming product to ensure it is not delivered Prepare standard and AS9102 First Article Reports as needed Verify certifications and reports are complete and accurate and can be used for final acceptance and certification of product Complete Deliverables for Customers and ensure they are complete and accurate Complete department logs and record yield data as required Perform preventative maintenance as defined by department maintenance schedule Support other work areas or departments as required by production or management. Ability to work overtime as requested Keep work area clean and organized Requirements Essential Qualifications, Education and Experience: High school diploma or equivalent One year of Quality Control experience Knowledge of AS 9100 Strong work ethic Ability to work effectively in a team environment Physical Requirements: Prolonged periods sitting and performing visual and manual tasks. Fine motor skills Ability to use microscopes for long periods of time performing job duties AdvancedPCB is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to age, race, color, religion, sex, sexual orientation, gender identity or expression, national origin, disability, status as a protected veteran, marital status, genetic information, medical condition, or any other characteristic protected by law (EEOC).Compensation: Exact compensation may vary based on skills, experience, and location. About AdvancedPCB, AdvancedPCB is a leading manufacturer of high-reliability printed circuit boards. The company features 6 total manufacturing sites: Santa Clara, our headquarters in the heart of the Silicon Valley; 2 in Southern California, 1 in Maple Grove, Minnesota, Aurora, Colorado and Chandler Arizona. Currently, the company is viewed as over $100 Million; 180,000 sq. ft. of manufacturing space with over 480 employees, making APCT one of the largest privately held printed circuit board manufacturers in North America. Visit us!********************* Salary Description $18.00

Minimum: Maximum: Location:Ft. Collins, ColoradoJob Type:Part time Job Title:Night Patrol SpecialistJob Description: GENERAL PURPOSE: Drives around a specified geographic area to locate and report sign/lighting outages or other service issues by performing the following duties: ESSENTIAL DUTIES & RESPONSIBILITIES: Drive an automobile around a predetermined route to survey the repair and service needs of sign and lighting components Documents outages by taking pictures and notating other details per established procedures Locates signs on an area map, determines sign and lighting outage and/or sign service issues location and address Estimates size and characteristics of outage or service issue, and reports findings to supervisor. Relays information to other interested departments, store managers, and/or owners Determines and plans best traveling routes to ensure the specified geographic area is fully surveyed and best time management is utilized Maintains records and logbooks Performs cleaning, preventative, and operator maintenance on YESCO company vehicles if provided MARGINAL DUTIES & RESPONSIBILITIES Assists Night Patrol Supervisor with duties Draws maps to assist techs and contractors locate outages Delivers parts Performs other functions as necessary or as assigned NATURE OF WORK CONTACTS: Interacts daily with supervisor, service, and sales employees in the field and in the office to discuss observations of possible sales/service leads and/or service issues TRAINING & QUALIFICATIONS: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Less than high school education; or up to one-month related sign project experience or training; must have a state-issued driver's license in good standing; or any combination of education, experience, and training which provides the following knowledge, skills and abilities: Ability to read and comprehend simple instructions, correspondence, and memos Ability to write simple correspondence Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization Ability to read, interpret, and apply safety rules, operating and maintenance instructions, and procedure manuals Ability to drive an automobile Ability to communicate in person Ability to see from a distance PHYSICAL/SENSORY DEMANDS: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Work is performed in company-owned or personal vehicles. While performing the duties of this job, the employee is often required to sit; use a computer to enter data; use a telephone to converse with YESCO employees. The employee is frequently required to use hands to finger, handle, or feel; reach with hands and arms, and talk or hear. The noise level in the work environment is usually moderate. Specific vision abilities include clarity of vision at a distance of 50 feet or more. We maintain a drug-free workplace. Young Electric Sign Company is an EEO/AA employer. We welcome all qualified job seekers. Jobseekers will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, veteran status, genetic data, religion or another legally protected status.

Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $30-$40 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only

Commercial and personal line insurance carriers rely on EXL as a key business partner through our Castle High Value and EXL Risk Control service offerings. We offer a variety of field inspections and risk control services to support our clients' underwriting processes. EXL's consultants deliver industry-leading professionalism, quality and turn-around time, and our innovative solutions help our clients keep ahead of the competition. ************************************************** Job Description EXL Risk Control is looking for self-directed independent contractors who possess excellent communication skills, computer proficiency, and a commitment to meeting client quality and timeliness standards. You will work from your own home or office, and service onsite survey/inspection assignments in the Scottsbluff, NE area, and other locations within approximately 45 miles of Scottsbluff. Responsibilities You will be responsible for scheduling on-site surveys and providing risk control reports to insurance industry clients. These reports contain information necessary to underwrite a commercial insurance policy and may include recommendations to control and/or correct potential loss producing conditions associated with that policy. You will be expected to manage assignments you accept, successfully secure customer appointments within a local territory and complete work assignments on time. Our Risk Control Inspectors evaluate businesses behind the scenes to identify hazards and improve safety, mitigating risks for our insurance company clients. The type of businesses we survey are commercial operations, including retail, restaurants, hotels, apartments, construction jobsites, churches, schools, etc. Most surveys are focused on assessing the business for Property and General Liability coverage, but we also service other commercial insurance lines of business including Workers Compensation, Auto/Fleet, Products Liability, Inland Marine and Builders Risk. Qualifications Preferred experience in commercial insurance, real estate, inspection, construction, claim, loss control, underwriting, and/or fire and safety experience is a plus, but all interested candidates are encouraged to submit their qualifications. In lieu of experience, we can refer you to a 15-hour online certification option to qualify you. Fees are negotiable depending on experience and the unique aspects of selected jobs. Tools or Items You Must Provide: Digital camera or tablet Computer Printer High speed internet access Reliable vehicle Measuring device such as a laser, 100 ft. tape, or measuring wheel Auto and General Liability Insurance All interested candidates are encouraged to apply.

Perform the approval for return to service after maintenance or modifications of an aircraft/engine/article in accordance with regulations, to include completion of FAA Form's 8130-3 and 337's when required along with logbook entries. Ensure aircraft or any component returned to service meet type design or properly altered state and in condition for safe flight. Ensure aircraft airworthiness by maintaining safety conditions conforming to standards set by the FAA and company policy. Verify all inspections performed comply with Manufacturer's Instructions for Continued Airworthiness and Air Methods Repair Station Manual. Essential Functions and Responsibilities include the following: Perform work order opening and closing tasks, preliminary inspections, hidden-damage inspections, statement of work review, and final inspections on civil aviation articles in accordance with the current maintenance data. Enters the return to service / airworthiness release authorization into the aircraft / article's permanent records (logbook) along with a list of the work performed. Review completed production control work packages for completeness and proper signoff, prior to execution of an airworthiness release or issuance of a serviceable tag Research aircraft and engine maintenance log pages to ensure compliance with current regulations, manufacture's programs, and the owner / operator's (for 3rd party work in the future) policies and procedures. Validate that any maintenance performed for 14 CFR Part 135 air carriers under a CAMP or AAIP program (to include RII inspections) in accordance with that carrier's FAA approved inspection manual. Inspect for airworthiness and quality of aircraft maintenance and alterations to include overseeing in process inspections, adjustments, repairs, or modifications made to aircraft components, sub-assemblies, and final product as well as issuing “OK to Close” for aircraft component parts. Ensure all tasks completed adhere to the manufactures, company, and regulatory policy and procedures. Responsible to ensure that all work performed by all company technicians assigned to a work order (supervise maintenance), is performed to current applicable FAA standards and results in an product that is airworthy and safe for flight. Ability to read and interpret complicated drawings, specifications, purchase orders, statement of work and standards to determine quality status. Must possess the skill and experience to use precision measuring instruments in a precise, accurate and repeatable manner. Support production and management with failure and nonconforming material data recording and reporting. Identify and communicate continuous improvement opportunities for the quality program. Supervise the application for Airworthiness Certificates, Ferry Permits and Field Approvals with the FAA. Supervise part incoming and receiving inspections. Create and inspect aircraft equipment lists and weight and balance records. Perform internal audits as specified in the FAA repair station quality control manual. In addition, assist in performing AMC safety audits. Additional Job Requirements Regular scheduled attendance Indicate the percentage of time spent traveling - 5% Supervisory Responsibilities This position has no supervisory responsibilities. Qualifications To perform this job successfully, an individual must be able to perform each essential function satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. In accordance with applicable laws, Air Methods will provide reasonable accommodations that do not create an undue burden so disabled employees may perform the essential functions of the position. Education & Experience High school diploma or general education degree (GED); and three to five years' technical rotor wing experience and/or training; or equivalent combination of education and experience. Technical knowledge of the following aircraft (in order of importance): Bell 407 and Airbus AS350 / EC130 series, Airbus EC-135 Series, Airbus EC-145 Series, Bell 429, Bell 412 Series, Leonardo A-109 Series, Leonardo A119 Series, Textron King Air, and Sikorsky S60/S70 derivatives. Technical knowledge of aircraft, appliances, and processes on the FAA part 145 Operations Specification Previous experiences in a FAA Certified Repair Station. Proficient with FAR's and ability to perform complex research of Federal Regulations. Commitment to airworthiness and qualify of aircraft parts approved for return to service. Skills Individual diversity and adaptability. Excellent written and verbal communication Must be able to work autonomously and to prioritize tasks. Computer Skills Proficient with Microsoft Suite, including Word, Excel, and Outlook Certificates, Licenses, Registrations A&P Certificate required FAA Inspection Authorization (IA) preferred. FCC GROL License preferred. Abaris composite training or equivalent preferred. Air Methods is an EEO/AA employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or protected veteran status. Minimum pay USD $64,445.00/Yr. Maximum Pay USD $93,575.00/Yr. Benefits For more information on our industry-leading benefits, please visit our benefits page here. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c)

Final QC Inspector FLSA STATUS: Non-Exempt DEPARTMENT: Quality SUPERVISOR: Quality Engineering Supervisor DIRECT REPORTS: None. This position is responsible for inspecting, testing, and sampling assembled parts or products for defects, wear, and deviations from specifications. The Final QC Inspector will conduct tests and inspections of products or processes to evaluate quality and performance, utilizing precision measuring instruments and test equipment. Minimum Qualifications Education: High school diploma, GED, or equivalent qualification preferred. IPC/WHMA-A-610 or 620 certification preferred. Experience: Prior experience in quality inspection, Knowledge: Knowledge of IPC 610 and 620, ability to read and understand customer requirements and simple customer assembly drawings Extensive knowledge of components, connectors, terminals and mating connectors for fixture construction Skills: Ability to read wiring diagrams and engineering drawings, use of multi-meter, complex test equipment, force gages and calipers Must be able to read, write and speak English Must be able to recognize discrepancies on drawings and in customer requirements and bring them to the attention of leads, supervisors and/or management Job Responsibilities Conduct basic signature testing of cables, test beeping, terminal and solder inspection, simple high voltage and ground impedance testing. Perform data entry and complete associated paperwork, including inspection logs. Conduct complex high voltage and ground impedance testing and generate new signature profiles for assemblies. Write first article inspection reports and complete RMA evaluations. Perform simple fixture repair and construction. Organize existing assembly files and fixture database. Audit shelf-life, hazardous communication (hazcom), and calibration logs. Calibrate Cirris Signature Testers. Evaluate new complex assemblies and develop inspection plans. Work closely with Manufacturing to identify and resolve issues with new assemblies. Train new inspectors and acquire information/components for future inspection requirements. Collaborate with Engineering and Account Management on workflow needs. Perform general area cleanup and organization. Attend appropriate training and administrative meetings. Work with other departments to achieve company goals. Utilize communication skills necessary to execute company directives. Perform soldering, termination, plugging of connectors, heat shrinking, and comply with ESD assembly requirements. Other responsibilities, initiatives and ad-hoc projects as required. Internal and External Relationships Internal: Works closely with the Quality Engineering Supervisor, Manufacturing, Engineering, and Account Management teams to ensure product quality and process efficiency. Collaborates with production staff to identify and resolve quality issues. External: Interacts with customers and suppliers as needed to address quality concerns, ensure compliance with specifications, and support continuous improvement initiatives. May communicate with third-party testing agencies when required. Physical Requirements The physical demands described here are representative of those that must be met to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand, walk, and sit for extended period and must have the capability to lift up to 25 pounds. They must perform repetitive tasks and they must also have the ability to see details clearly at close range (within a few feet) and have precise coordination of fingers for grasping, manipulating, or assembling small objects. Overtime may be required based on production demands. The working environment is a standard manufacturing environment. The noise level in the work environment is usually low to moderate. Pay: $21-26/hr (varies based on experience)

West Star is the fastest growing maintenance repair organization in the industry and we recognize this is the result of our talented team of trusted employees working together to deliver customer service excellence. We are committed to providing our employees with personal and professional growth opportunities while fostering a culture of respect and well-being with a small company feel. When you join our team we don't think you should have to wait for your benefits to kick in. That's why when you start, they start with you! This includes medical, dental, 401K match, time off accruals, weekly pay days and much more. We don't want you to live to work, we want you to work and live. What you can expect as a Quality Control Inspector at West Star: The Quality Control Inspector maintains West Star Aviation's quality standards in accordance with the West Star Repair Station/Quality Control Manual and the Federal Aviation Regulations. This will be accomplished by working with Aircraft Technicians, Program Managers, Team Leaders, Quality Control and Quality Assurance Inspectors. You will be ESSENTIAL to many FUNCTIONS including: * Maintain West Star Aviation's quality standards by inspecting technician's work, performing "ok to close", and auditing. * Ensure proper sign-offs in Corridor as part of the inspection process. * Participate in daily review meetings. * Assist with Airframe Inspections * Following up with all departments to get steps signed off, inspected, and closed so airframe squawks can be completed. * Help manage Equipment Removal and Installation Log. * Assist QA Department with log research issues to help clear items that are in question. * Daily contact at aircraft with Team Leaders to ensure quality standards are met. * Maintain customer oriented work habits. * Effectively and clearly communicate (i.e., speak, write, read) in English * Any other job-related duties as assigned by supervisor or management. What you'll need to bring with you: Your Education: A High school diploma or equivalent. A&P License or Repairman Certificate will be required. Inspection Authorization (IA) rating is recommended. A valid driver's license approved for airline travel and/or a valid passport is ideal, but not required Your Experience : Familiar with all facets of manuals required to maintain aircraft. Thorough knowledge of FAA regulations. 3 years turbine aircraft inspection experience with return to service authority required. Customer service experience recommended. Follow all company rules and FAA regulations during performance of duties. Maintain customer oriented work habits for oneself and the department. Your Initiative: We're looking for team players who are self-motivated and able to perform in a fast paced environment where working under specific deadlines and time constraints will be common. Being detail oriented, maintaining accuracy and communicating clearly both written and verbally will be needed for success. Your Sense of Responsibility: Attend work every day as scheduled to include overtime and weekend assignments. Notify supervisor in advance of shift starting if unable to work. Must have reliable transportation to get to work each and every day. Enter data and complete entries with high degree of accuracy. Coordinate projects and maintain schedules as required. Ensure good communication with management and personnel on all data needs. Follow all company rules and FAA regulations during performance of duties. Maintain customer oriented work habits for oneself and the department. Actively work to maintain work order system current. Other particulars: Physical Requirements Lift and carry at least 25 lbs. Bend, reach and stoop when around aircraft. Sit at desk and / or computer for extended intervals. Routinely walking. Mental Requirements Prioritize and control work load. Work with others in a professional manner. Work with Quality Department personnel in interpretation and communication of regulations Supervision Work with minimal supervision Working Conditions The majority of work will be performed in a hangar environment which can include both hot and cold temperatures. Some occasional work outside hangars may occur. Equipment Used Computer systems including Corridor Aviation Service software, personal computers operating with Windows, Microsoft Word, Microsoft Excel and various other programs.

Job DescriptionDescription: A Quality Control/Floor Inspector assists the Chief Inspector with all things as required and needed in support of the Repair Station and operations. This person reports directly to the Chief Inspector. Key Duties and Responsibilities: Maintain a clean and orderly workspace. Work efficiently with the team to ensure a smooth workflow. Assist the Chief Inspector with logbook research as required. Perform aircraft inspections when not inspecting discrepancies or work orders. Assist the Chief Inspector with floor inspection items. Giving the “ok to close panels” and being the “backup” to ensure quality and safety of our products. Assist the Chief Inspector with returning aircraft to service after work is completed. Ensure that we are delivering a safe aircraft that meets our quality standards. Inspecting discrepancies once completed for proper repairs, correct paperwork, and correct sign-off of discrepancies. (Make sure accepted or approved procedures are used at all times.) Other duties as assigned. Benefits Available with employment: Medical, Dental, Vision and Supplemental Plans Anticipated application close date: 12/24/25 Requirements: Education Requirements: Must have High School Diploma or GED Must have an FAA approved Airframe and Power plant license. Experience Requirements: Sincere desire to assist others. Able to develop a friendly rapport. Professional in appearance and mannerisms. Ability to work independently with minimal direction. Ability to understand technical publications and requirements. Clear understanding of FAA and Repair Station requirements. Assist with or undertake any other duties as assigned by key personnel. Ability to work with several individuals while showing independence in balancing and prioritizing requests. Other Requirements: Must have a clean driving record. Ability to pass a background check. Occasionally required to lift up to 35 pounds. Must be able to sit, stand, kneel and climb ladders. Must be able to show up to work on time ready to work. Must have dependable transportation to and from work. Ability to pass an initial and random drug screening test. Ideal Candidate Will Possess the Following Skills: Attention to detail. Being open to change. Being reliable, responsible, dependable, and fulfilling obligations. Willingness to take on responsibilities, accept changes, and challenges. Accepting criticism and dealing calmly and effectively with high stress situations. Being pleasant with others on the job and displaying a good-natured, cooperative attitude. An ability to guide oneself with little or no supervision, depending on oneself to get things done while following the requirements of the Repair Station.