Quality inspector jobs in Cranston, RI - 190 jobs

The Equipment Qualification Technician is responsible for verifying, qualifying, and maintaining the quality and performance of manufacturing equipment (not finished products). This role focuses on ensuring machines and production systems operate reliably, meet qualification standards, and comply with regulatory requirements in a manufacturing environment. Key Responsibilities: Perform IQ, OQ, and PQ on manufacturing equipment Verify machine performance, functionality, and compliance (not product inspection) Document qualification results, deviations, and corrective actions Work hands-on on the manufacturing floor / shop environment Support equipment setup, troubleshooting, and issue resolution Work around production lines, machines, and industrial systems Partner with Engineering, Quality, and Operations teams Participate in root cause analysis, audits, and process improvement activities Train operators and provide technical support once equipment is qualified Experience Prior experience in a manufacturing environment (required) Experience working with machines, equipment, or production lines Experience in regulated environments (GMP / ISO preferred) Technical Skills Equipment qualification or validation exposure (IQ/OQ/PQ preferred) Mechanical aptitude with hands-on troubleshooting and equipment setup Ability to follow and document technical procedures

Primary Skills: Robotics testing (Expert), Automaton Testing (Proficient), Documentation (Proficient), Test Plans (Proficient), bug management (Proficient), Contract Type: W2 Duration: 6+ months with possible extension Pay Range: $45.00 - $50.00 per hour #LP Job Summary: We are looking for a Quality Assurance Technician II to join our team, dedicated to operating and supporting robotic technology at sortation centers. This role involves executing test plans, collecting and analyzing data, and reporting results under the guidance of Test Engineers and Engineering Leads. The successful candidate will work closely with sortation center personnel to ensure the successful integration of new technologies into our product development process. Key Responsibilities: Execute test plans developed by Global Engineering Test Engineers. Collect and analyze data from testing processes to identify areas for improvement. Engage with Test Engineers, TE Manager, and Engineering Leads for guidance and direction. Collaborate with local sortation site personnel including Operations, RME, WHS, etc. Report results and findings to stakeholders and suggest recommendations for enhancements. Must Have Skills: Operate and test robotic technologies at sortation centers, supporting onboarding into RDPI's product development process Execute engineering test plans and test cases developed by RDPI Global Engineering Test Engineers Collect, analyze, and report test data and results with accuracy and clarity Work under direct guidance from Test Engineers, TE Managers, and Engineering Leads to support testing objectives This role offers the chance to work with cutting-edge robotic technologies and contribute to the development of new processes within a leading global company. If you are passionate about quality assurance and have a knack for working with innovative technologies, we'd like to hear from you. ABOUT AKRAYA Akraya is an award-winning IT staffing firm consistently recognized for our commitment to excellence and a thriving work environment. Most recently, we were recognized Inc's Best Workplaces 2024 and Silicon Valley's Best Places to Work by the San Francisco Business Journal (2024) and Glassdoor's Best Places to Work (2023 & 2022)! Industry Leaders in IT Staffing As staffing solutions providers for Fortune 100 companies, Akraya's industry recognitions solidify our leadership position in the IT staffing space. We don't just connect you with great jobs, we connect you with a workplace that inspires! Join Akraya Today! Let us lead you to your dream career and experience the Akraya difference. Browse our open positions and join our team!

Job Title: Receiving Inspector Shift 1st Shift: 8:30 AM - 5:00 PM 2nd Shift: 12:30 PM - 9:00 PM Days: Monday - Friday Pay Rate: $19.10/hour Employment Type: Temp-to-Perm Job Summary The Receiving Inspector is responsible for inspecting incoming and returned medical devices to ensure they meet quality, regulatory, and documentation standards. This role includes verifying sterility, temperature conditions, labeling, and required paperwork before products are placed into inventory. The position requires accurate data entry to track inspection status and working in a regulated warehouse environment. SAP and WMS Manhattan systems training provided. Candidates must be able to lift up to 40 lbs and pass a background check and drug screening (including marijuana). Department Openings Returns Department - 2 Openings Process and inspect returned products only Perform accurate data entry and system documentation Use pallet jacks as needed (experience preferred; training provided) Maintain strong attention to detail and organization Complaints Department - 1 Opening Inspect used medical devices returned from hospital surgery departments Comfort with handling open/used products, including exposure to blood, is highly desirable Must be comfortable working around blood Prepare and send clear, professional written communications regarding inspection findings What You'll Need High school diploma or equivalent experience Good computer skills and data entry Strong attention to detail and organizational skills Good written and verbal communication skills Ability to lift up to 40 lbs Previous experience in inspection, quality control, or a regulated environment is a plus Pay Details: $19.10 per hour Benefit offerings available for our associates include medical, dental, vision, life insurance, short-term disability, additional voluntary benefits, EAP program, commuter benefits and a 401K plan. Our benefit offerings provide employees the flexibility to choose the type of coverage that meets their individual needs. In addition, our associates may be eligible for paid leave including Paid Sick Leave or any other paid leave required by Federal, State, or local law, as well as Holiday pay where applicable. Equal Opportunity Employer/Veterans/Disabled Military connected talent encouraged to apply To read our Candidate Privacy Information Statement, which explains how we will use your information, please navigate to The Company will consider qualified applicants with arrest and conviction records in accordance with federal, state, and local laws and/or security clearance requirements, including, as applicable: The California Fair Chance Act Los Angeles City Fair Chance Ordinance Los Angeles County Fair Chance Ordinance for Employers San Francisco Fair Chance Ordinance Massachusetts Candidates Only: It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability.

Job Description Busek Co. Inc. (************** research, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. How you will make an impact: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Skills: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. The expected salary range for this position is $52,000 - $79,000. Actual compensation will be determined by the candidate's experience, education, and alignment with organizational needs. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal Powered by JazzHR 7u9ZsAqfCq

IN THIS ROLE, YOUR RESPONSIBILITIES WILL BE: Follow and implement standard quality procedures. Perform the more standardized dimensional, mechanical and visual inspection of subassemblies, finished and semi-finished components and parts for size, correct material, finish, appearance, and other pertinent requirements. Devise routine dimensional gauging set-ups, make out report and rejections slips and record data to Crosby specifications. Plan and perform a sequence of operations for inspection using all types of measuring apparatus such as micrometers, verniers, height and depth comparator and air gages, etc. Perform first piece part, bench and periodic inspection as necessary within the limits of standard practice. Refer all questionable cases to Inspection Supervisor. Report reasons for defects or malfunctions. WHO YOU ARE: You are someone who is reliable, invests the time to learn, and takes pride in producing quality results. FOR THIS ROLE, YOU WILL NEED: High School diploma, or equivalent Minimum of 1-2 years working in a manufacturing/quality environment Familiarity with tools needed for inspection PREFERRED QUALIFICATIONS THAT SET YOU APART: 2 plus years working in a quality control position Previous experience with Micrometers, verniers, or other inspection tools MS Office skills Our Location: Mansfield, Massachusetts, offers the charm of a suburban community with the convenience of a prime location in southeastern Massachusetts. Known for its excellent schools and family -friendly atmosphere, Mansfield provides easy access to both Boston and Providence via major highways and a commuter rail station. Residents enjoy a variety of recreational opportunities, including local parks, sports fields, and trails, as well as vibrant community events and concerts at the Xfinity Center, a popular outdoor entertainment venue, as well as proximity to Patriot Place! With its strong sense of community and convenient amenities, Mansfield is an ideal place to call home! Our Culture and Commitment to You: At Emerson, we prioritize a workplace where every employee is valued, respected, and empowered to grow. We foster an environment that encourages innovation, collaboration, and diverse perspectives-because we know that great ideas come from great teams. Our commitment to ongoing career development and growing can inclusive culture ensures you have the support to thrive. Whether through mentorship, training, or leadership opportunities, we invest in your success so you can make a lasting impact. We believe diverse teams working together are key to driving growth and delivering business results. We recognize the importance of employee wellbeing. We prioritize providing flexible, competitive benefits plans to meet your family's physical, mental, and financial, and social needs. We provide a variety of medical insurance plans, with dental and vision coverage, Employee Assistance Program, 401(k), tuition reimbursement, employee resource groups, recognition, and much more. Our culture offers flexible time off plans, including paid parental leave (maternal and paternal), vacation and holiday leave.

The Panther Group is seeking a Quality Inspector to support inspection activities throughout the production assembly process, from in-process inspection through final system assembly. This role is open to both entry-level and experienced candidates, with training provided for those new to quality inspection. 1st shift (for Quality Inspector 1) Mon-Fri, 6am-2:30pm. 2nd shift (for Quality Inspector 2) Mon-Fri, 2:30pm-10:30pm. or 3:30pm - midnight. Essential Duties & Responsibilities Perform in-process, first article, and final inspections throughout manufacturing Verify products meet workmanship, process, documentation, and customer requirements Follow ESD and board handling requirements Handle Moisture Sensitive Devices (MSD) per component MSL requirements Review documentation for compliance with internal procedures Disposition assemblies for rework or repair as needed Authorize shipment of product that meets industry and customer specifications Use inspection tools such as calipers, rulers, microscopes, and gauges Support ISO Quality Management Systems and site 6S objectives Accurately record inspection results in the electronic manufacturing system Support one or multiple product lines based on experience level Perform other related duties as assigned Qualifications Required: High School Diploma or GED Pass IPC-DVD-64C Component Identification. Pass IPC-A-610 Modules, 1, 2, 3, 4, 5, 6, 7 & 8. Ability to read assembly drawings, blueprints, and Bills of Materials Familiarity with First Piece, In-Process, Audit, and Final Inspection Knowledge of ESD and electronic assembly environments Ability to use Inspection Gauge (Calipers, Rulers, Microscope, etc.) Ability to use electronic manufacturing system (OCuity) Ability to use Microsoft Office tools like Excel and Word as well as shop floor control systems (Aegis). Ability to work in a team-oriented manufacturing environment Strong attention to detail and sense of urgency Comfortable performing repetitive inspection tasks Ability to follow written procedures and instructions Preferred (training may be provided): IPC-A-610 and IPC-DVD-64C certifications Experience Levels Entry-Level: 0-6 months manufacturing or inspection experience Experienced: 2+ years of quality inspection or related technical experience Technical or vocational certification may substitute for experience Pay is $20 - $28 / hour depending on experience and shift. #INDENG #ZR

JOB TITLE: Quality Control Inspector JOB CODE: Quality Control REPORTS TO: Quality Assurance Manager. Direct on-site project direction and daily scheduling provided through continuous communication with the applicable IMIA Project Manager and/or Supervisor. PAY RANGE: $32.00/hour- $42.00/hour based on experience Summary of position: Responsible for monitoring quality control/assurance requirements of all preservation preformed onboard commercial and US Navy vessel in accordance with established Navy regulations and industry standards or specific contractual requirements as defined in the Scope of Work. Collaborate with customer QA personnel on necessary aspects of the job. Essential Job Requirements: Produce/create electronic/handwritten Quality Assurance documentation as Objective Quality Evidence for work performed throughout the preservation process. Develop and Maintain Test and Inspection Plan (TIP) for all assigned jobs. Monitor and document all required readings with regard to, but not limited to, metal anchor tooth (profile), paint wet/dry film thickness (DFT), steel temperatures and all required environmental readings using appropriate equipment to include: micrometer, dry film thickness gauge, infrared thermometer, psychomotor. Ensure all assigned equipment is maintained in good working order with within all calibration certification intervals. All of the above requirements shall be completed in a safe and efficient manner so as not to cause injury to self or others. Required Education: High School diploma or equivalent Required Certification: NACE Inspector and/or SSPC NBPI required. Required Experience: Formal or informal on-the-job training in the marine industry; familiarity with Navy and Society for Protective Coatings standards. Required Skills: Must possess knowledge of Maritime paintings standards with particular emphasis in US Navy ship preservation criterion. Word processing, spreadsheet, email, and database computer skills required. Must be able to accomplish mathematical calculations associated with preservation readings and documentation; must be able to discern and carry out complex written, oral, or diagramed instructions. Must be able to take direction; interact professionally, knowledgeably and cooperatively with supervisors and co-workers and customer representatives. Physical Requirements: Must be physically capable of working an 8-10 hour day requires average use of computer, some physical dexterity, and agility within confined and restricted spaces & tanks. Reasonable Accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Supervisory Responsibilities: None Working Conditions: Regularly stand for long periods of time; work on scaffolds and ladders; work on top of machinery; work in confined spaces. Regularly exposed to extreme temperatures, high noise levels, toxic or caustic chemicals, fumes, airborne particles, outdoor weather conditions, dusty conditions, wet and/or humid conditions, hazardous machinery, precarious places, close proximity to other employees. Overtime or shift work involved. Travel often required. Must follow strict safety procedures.

Inspection of product in the production assembly process through final system assembly. Essential Duties and Responsibilities: Adhere to all ESD requirements and Board Handling. Use of Moisture Sensitive Device (MSD) handling requirements based on component moisture sensitive levels (MSL). Verify product compliance to workmanship standards. Verify process compliance to procedures. Verify documentation compliance to document control process/procedure. Verify product complies with customer requirements. Perform 1 st piece inspections of products as required through out the manufacturing process. Ability to perform the necessary tasks of In Process Inspection. Disposition of assemblies for rework and repair. Authorization of shipment of product that meets industry and customer specifications. Support and follow all ISO standards related to OnCore's various Quality Management Systems. These systems may include, but are not limited to, quality, the environment, health, safety and security. Support all corporate and site 6S objectives. Perform all other duties, as assigned. Qualifications Job knowledge, Skills & Abilities: Ability to utilize electronic manufacturing system (OCuity). Pass IPC-DVD-64C Component Identification. Pass IPC-A-610 Modules, 1, 2, 3, 4, 5, 6, 7 & 8. High sense of urgency and attention to detail. Ability to successfully participate in a team environment. Ability to read blueprints. Assembly drawings, customer Bills of Materials. Familiarity with First Piece, In Process, Audit, and Final Quality Control Inspection Procedure. Ability to use Inspection Gauge (Calipers, Rulers, Microscope, etc). Monitor processes, materials, or surroundings. Ability to work on single task / procedures / products. Highly repetitive or routine duties, Ability to support 1-2 product lines / customer(s) Normally receives detailed instructions on work Works under close supervision Experience/Education: High School Diploma or GED. 0-6 months previous experience Due to ITAR and/ or CUI compliance, this position requires candidates to be a U.S. Citizen, Permanent Resident Alien, or Protected Individual per 8 U.S.C.1324b(a)(3)”. Benefits Offered: Comprehensive benefit package including medical, dental and vision coverage; company-paid basic life/AD&D insurance, short-term and long-term disability insurance; voluntary supplemental insurances, flexible spending accounts and employee assistance program (EAP). Sick Leave, Vacation Time, and company-paid Holidays are also provided as paid time off. NEOTech also provides a 401(k) Retirement Savings Plan option with a company match. NEOTech is an Equal Opportunity/Affirmative Action employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex including sexual orientation and gender identity, national origin, disability, protected Veteran status, or any other characteristic protected by applicable federal, state, or local law. NEOTech has a long-standing commitment to maintaining a safe, quality-oriented and productive work environment. We also want all employees to perform their duties safely and efficiently, in a manner that protects their interests and those of their co-workers. We recognize that alcohol and drug abuse pose a threat to the health and safety of NEOTech employees and to the security of the Company's equipment and facilities. For these reasons, NEOTech is committed to the elimination of drug and alcohol use and abuse in the workplace. Candidates being considered for hire must pass a pre-employment background check and drug test which include screening for illegal drugs and marijuana.

Job Description Quality Inspector We are seeking a Quality Inspector to join our manufacturing team in Worcester, MA. This is a first-shift position (7:00 AM 3:30 PM) responsible for performing inspections and tests to ensure that materials, components, and finished products meet quality standards and specifications. The Quality Inspector will use precision measurement tools, conduct First Article Inspections, and maintain accurate documentation to support production and compliance requirements. Responsibilities Perform inspections and tests on incoming materials, in-process components, and finished products Interpret blueprints and technical specifications to determine inspection requirements Measure and verify conformance using calipers, micrometers, gauges, and microscopes Record inspection data and prepare quality reports Identify and report production issues, recommend corrective actions, and assist with process improvements Maintain, calibrate, and repair inspection equipment as needed Ensure compliance with ISO procedures and OSHA safety standards Qualifications High school diploma or GED required 2+ years of experience as a quality inspector in a manufacturing environment Proficiency with inspection tools and First Article Inspections Strong attention to detail, organizational, and communication skills Knowledge of ISO compliance and quality processes preferred Pay and Schedule $20.00 $23.00 per hour based on experience First shift: 7:00 AM 3:30 PM, Monday through Friday Comprehensive benefits package including health, dental, vision, 401(k), and paid time off

We are seeking a Quality Control Inspector with experience in conducting first article inspection processes to ensure the quality of finished products. The ideal candidate will have some prior experience with FAI, knowledge of quality assurance techniques, and the ability to interpret engineering drawings and technical documents. Responsibilities: Assist in Conducting First Article inspection (AS9102) processes and document activities Interpret test results for acceptance or rejection Record test results and compile nonconforming output report Mechanical Inspection Electrical Point to Point wiring continuity testing Maintain calibration logs Qualifications: Minimum experience with first article inspection processes (Will Train) Knowledge of quality assurance techniques and functions Previous experience with calipers and micrometers Ability to read and interpret engineering drawings, specs, and other technical documents Mechanical aptitude Excellent communication skills both verbally and in writing

Growing Pharmaceutical, Biotechnology and Medical Device companies always need TOP Talent. Since 1996, MakroScientific's proven staffing solutions have helped many Life Sciences companies succeed and visualize their goals by increasing innovation and decreasing costs while maintaining the complex service level expectations. Our global presence with offices in USA (NJ, PA, IL, CA) and offices in UK, Europe and Asia enables us to be a powerful contributor and connector of right Talent. Job Description Job Title: Quality Inspector Duration: 6 Months Location: Northborough, MA Position over view: • Monitors and/or performs inspection and control of products and materials. • Performs product and/or component inspections in accordance with specifications and SOP.s. • Samples, inspects, and releases components and raw materials as per SOP.s and specifications. • Monitors various stages of processing along with the appropriate paperwork in compliance with specifications. • Maintains raw materials, in-process and finished goods retain storage areas. • May conduct simple testing in accordance with defined standard operating procedures. • Contact with outside vendors as necessary. • Filing and archiving study related documents, includes lifting of boxes (~25 - 40 lbs). • Demonstrated ability in the application of the requisite skills to perform the required tasks of the position. • Receives general instructions on routine assignments under general supervision. • Receives detailed instructions on new work, which may be closely supervised and reviewed. • The work environment characteristics described here are representative of those an employee to encounters while performing the essential functions of this job. • Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. • Job has potential for biohazard exposure. • Experience 1-3 years. SKILLS Over viewed: • Multi-task oriented with the ability to change focus quickly • cGMP experience/knowledge is preferred. • Quality Inspection experience is preferred. • Proficiency in Microsoft Office Suite is a must (especially Microsoft Word and Excel) High organizational skills preferred. Qualifications Education over viewed: • Associates Degree or Bachelor's Degree preferred Additional Information All your information will be kept confidential according to EEO guidelines.

Summary: The Lead Housing Quality Standard (HQS) Inspector is responsible for conducting any mandatory inspection for all leased units under the Rental Assistance Program in accordance to the Department of Housing and Urban Development (HUD) and Department of Housing and Community Development (DHCD) program guidance. As the Lead HQS Inspector the incumbent is expected to assist the Inspections' Supervisor in providing training to newly hired inspectors and with administrative duties as assigned. Why Work for SMOC? Paid Time Off: All full-time employees can accrue up to 3 weeks of vacation, and 2 weeks of sick time and are eligible for 12 paid holidays during their first year of employment. Employer-paid Life Insurance & AD&D and Long-Term Disability for full-time employees. Comprehensive Benefits Package including Medical Plans through Mass General Brigham with an HRA Employer cost-sharing program, Dental Plans with Orthodontic Coverage, and EyeMed Vision Insurance available to full-time employees. 403(B) Retirement Plan with a company match starting on day one for all full-time and part-time employees. Additional voluntary benefits including; Term and Whole Life Insurance, Accident Insurance, Critical Illness, Hospital indemnity, and Short-Term Disability. Flexible Spending Accounts, Dependent Care Accounts, Employee Assistance Program, Tuition Reimbursement and more. Primary Responsibilities: Conduct thorough HUD/DHCD HQS inspections of all SMOC RAPS existing units, potential new units, and the reinspection of those units as required including physical and remote virtual inspections. Verify unit compliance based on health and safety requirements. Verify unit conditions for rent reasonableness comparisons. Enter all inspection data into the MRI Tenmast Software Systems' Inspection module and monitoring information as needed; printing all required inspection-related letters for participating tenants and owners. Assist the Inspection Supervisor in providing "on the job" training for newly hired HQS inspectors in the field Assist the Inspection Supervisor in monitoring the various types of inspections conducted by the HQS Inspection team including remote virtual inspections, re-inspections, inspections conducted using an owner self certification and physical inspections Make recommendations to the Inspection Supervisor on behalf of the HQS inspectors on process and procedure Monitor HQS supplies and make requests to the Program Director on orders for necessary equipment such as gloves, shoe coverings and personal protective equipment as needed Utilize and maintain inspection-related equipment on a regular basis, including camera, hand-held inspection devices or tablets, flashlight, cell phone, tick tester, and inspection-supply cache. Engage all clients by understanding and addressing their needs whether within or outside the scope of work. Attend & participate in engagement team meetings as requested and communicate effectively with clients and staff in other areas. Maintain confidentiality of client, employee and agency information in accordance with federal and state laws and funder requirements. Ensure compliance with program/department, agency and/or funder requirements, as well as SMOC policies & procedures. Other duties as assigned. Knowledge and Skill Requirements: Education: High school diploma or equivalent Minimum years of related experience: 1-2 years preferred Knowledge of Excel, Windows, Word and PCs, ability to work well in a very high volume and productivity environment, ability to handle potentially stressful situations and sensitivity to the needs of economically- disadvantaged clientele. Valid Mass. driver's license and insurance Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Must meet all required DHCD program certifications within 1 year. Organizational Relationship: Directly reports to HQS Inspection Supervisor. Indirectly reports to Program Director, Assistant Director and Division Director. Direct reports of this position are none. Indirect reports of this position are HQS Inspectors. Physical Requirement: Physical effort required to do the job: Mobility to use office machines, sitting, standing, ability to lift archive boxes filled with files. Working Conditions: This job requires working in many different conditions and places. About 80% of the time is outside the office either on the road or at a tenant's unit. Therefore, conditions range from an office environment to an outdoor environment that can be dirty, wet, cold, hot, difficult and risky. As part of the responsibilities of this position, the Lead Inspector will have direct or incidental contact with clients served by SMOC in various programs funded or administered through the Executive Office of Health and Human Services. A successful background check is required.

JOB TITLE: Quality Technician DEPARTMENT: Quality REPORTS TO: Quality Assurance Supervisor PAY: $21.00 - $23.00 per hour HOURS / SHIFT: 1st Shift / 5:30am - 2:00pm BENEFITS & PERKS: Finlays Solutions is committed to supporting the career advancement and wellbeing of our employees. We offer a range of comprehensive benefits, including a wellness program, learning and development allowance, and opportunities for mentorship and job shadowing, designed to support both personal and professional growth. We encourage continuous learning, collaboration, and the exploration of new skills and career pathways, helping you build a global network and thrive within an inclusive, supportive environment in our organization. Other employee benefits include: Health, Dental, and Vision Insurance 401(k) Company Matching Eligibility for Monthly / Annual Bonuses Paid Time Off (PTO) plus 10 Paid Holidays and Paid Volunteer Days Off Volunteer / Community Involvement DESCRIPTION: The Quality Technician will provide logistical support of the Food Safety and Quality Assurance Department and quality related aspects of the Production Department. Inspect all areas of facility and grounds to ensure constant compliance with GMP's, SSOP and HACCP Procedures. Maintain databases and other documentation required for Quality Assurance. Performs laboratory testing in support of Quality Assurance and Food Safety. Each responsibility is performed in accordance with food safety procedures. ABOUT US: Since 1750, Finlays Solutions has been the trusted leader in supplying tea, coffee, and botanical extracts to the world's leading beverage brands. Focused on delivering exceptional beverage solutions, we empower our customers to create moments of joy with every sip. Our team is built on values of acting for the long-term, taking accountability, doing better each time, and succeeding together. When you join us, you're not just taking on a job; you're becoming part of a customer-centric culture driven by collaboration, expertise, and innovation. If you're looking for a place to grow, share your ideas, and make an impact, we'd love to have you on our team. RESPONSIBILITIES: Work involves some irregular work schedule. Must be able to lift and routinely carry up to 35 pounds. Required to stand or walk up to 100% of the duty time. Requires some bending and stooping Will be recognized by all staff as having authority and accountability delegated by the Food Safety and Quality Assurance Manager and as specified in written procedures and plans to guide staff in duties related to Food Safety and Quality Assurance. Maintains databases and other documentation related to the department for the purposes of monitoring, evaluating, tracking, and trending interdepartmental data and to ensure constant compliance with standards, specifications, and regulatory requirements. Provides logistical support to ensure accurate labelling of finished goods in accordance with regulatory and customer requirements. Conducts and records laboratory testing to verify conformance to established standards and confirmation that critical control points do not exceed critical limits as established in HACCP Plans. Respond to all non-conformances to apply corrective actions and implement preventative measures. Respond to Production, Quality Assurance and Food Safety concerns by reporting problems to the Quality Assurance Manager. TESTING/ANALYSES TYPICAL RESPONSIBILITIES: Logs, processes, and tracks samples. Conducts qualitative and quantitative physical testing. Evaluate materials for compliance to standards and specifications. Operates laboratory equipment, such as analytical balances, pH meters, brix meters, water activity meters, and ATP meters. Prepare standard solutions for calibration and analyses. EQUIPMENT OPERATION AND MAINTENANCE TYPICAL RESPONSIBILITIES: Learn to evaluate methods and instrument operation problems and to review or analyze test results to locate malfunctions or inconsistencies. Maintains and calibrates lab equipment. Maintains supply of solutions, reagents and other lab testing materials. Must be able to make decisions pertaining to acceptance and rejection of manufactured goods. Hold or release of goods. Halting or allowing production. Application of corrective actions and preventive measures. QUALIFICATIONS & REQUIREMENTS: Bachelor's Degree: Degree Preferred. Experience in food processing or related field is preferred. Professional Experience: 1-2 years working experience in Quality and Food Safety Systems, ideally in a Food Safety Team Leader role. Other Working Experience: Experience in the food and beverage industry preferred. WORK ENVIRONMENT & PHYSICAL REQUIREMENTS: Work Environment: Onsite position in Lincoln, RI manufacturing facility Food processing/manufacturing environment Laboratory setting for testing and analyses Inspection of all facility areas and grounds Irregular work schedule required Physical Requirements: Must be able to lift and routinely carry up to 35 pounds Required to stand or walk up to 100% of duty time Requires some bending and stooping Ability to move throughout facility for inspections and quality checks Ability to operate laboratory equipment (analytical balances, pH meters, brix meters, water activity meters, ATP meters) EQUAL OPPORTUNITY STATEMENT: Finlays Solutions is an equal employment opportunity employer seeking diversity in qualified applicants for employment. All applicants will receive consideration for employment without regard to race, ethnicity, color, gender, gender identity, age, religion, national origin, ancestry, disability, perceived disability, medical condition, genetic information, veteran status, sexual orientation, or any other protected status, as defined by applicable law. Finlays Solutions employs individuals that are 18 years of age or older. This position is not eligible for Visa Sponsorship.

We are a growing manufacturing company looking for an individual to assist or lead our quality control department Requirements A qualified individual would: Be able to read and interpret drawings. Understand GD&T. Understand a variety of sampling plans. Utilize best practice inspection methods to ensure product conforms to customer and drawing specifications. Be familiar with and able to use a variety of inspection tooling (micrometers, calipers, CMM, indicators, optical comparator, etc). Have good computer skills (Microsoft Office, Outlook, be able to learn a robust ERP system). Be familiar with completing first article inspections per AS9102 and complete utilizing specialized software. Have a good organizational skill set as each customer has a different set of requirements that are critical to product acceptance. Be familiar with the requirements of ISO9001. Attention to detail is critical. FULL TIME EMPLOYEE BENEFITS: Competitive compensation based on experience BCBS Medical, Altus Dental and Vision, Disability and Life Insurance - 100% Company Paid. Paid personal and vacation time (PTO) 10+ Paid holidays 401K plan Potential for Growth OT based on business conditions COMPANY: Bendon Gear is a precision machine and gear company doing business for over 40 years, with a stable set of excellent customers. We are a good, solid company, and we wish to build a team of good people who are motivated, flexible, and capable. Job Types: Full-time, Part-time Salary: $18.00 - $27.00 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Professional development assistance Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Salary Description $18 - 27.00 / Hr

Full-time Description Department: Quality Supervisor: Quality Assurance Manager Hourly Rate Range: Hourly rate will be commensurate with experience Schedule: M-F, 40 hours/ week- OT as required Education Requirements: High School Diploma or GED Years of Experience: 3 years related experience Position Summary: Quality technician I will perform inspections, tests, and measurements to ensure that products consistently meet both internal and external quality standards throughout the production process. Your attention to detail and strict adherence to procedures will support continuous improvement in manufacturing operations. You will collaborate closely with the production team to ensure all outputs meet company and industry standards, while contributing to our ISO?9001 and AS9100 certification compliance efforts. Key Responsibilities: · Conduct visual, dimensional, and functional inspections on raw materials, in-process components, and finished products according to established protocols. · Use precision measurement tools (e.g., calipers, micrometers, gauges) and equipment (e.g., CMM) to verify product specifications. · Perform routine sampling, testing, and record results in the quality management system (QMS). · Identify non-conforming items, quarantine defects, and initiate corrective actions in collaboration with production teams. · Assist in root cause analysis, corrective/preventive action (CAPA) investigations, and implement improvements. · Maintain calibration schedules and ensure inspection equipment is in good operating condition. · Generate quality reports and provide feedback to production and engineering teams. Requirements Qualifications: · High school diploma or equivalent; Associate degree or technical certification in quality assurance, manufacturing, or related field preferred. · 1-3 years of experience in quality control or inspection, preferably in manufacturing engineering, process improvement, or industrial engineering. · Proficient with precision measurement instruments and quality inspection tools. · Working knowledge of statistical process control (SPC) and root cause analysis methods. · Familiarity with quality management systems ISO 9001 / AS9100. · Knowledge of root cause analysis techniques (5 Whys, Fishbone, FMEA). · Strong background in lean manufacturing, Six Sigma, and continuous improvement methodologies. · Strong attention to detail and problem-solving abilities. · Effective verbal and written communication skills. · Ability to work independently and collaboratively in a fast-paced environment. · Basic computer skills; experience with QMS software and MS Office. Preferred Qualifications: · Certified Quality Inspector (CQI) or ASQ certification. · GxP/GMP training. · Six Sigma Green Belt (Or Above) Key Performance Indicators (KPIs) 1. First Pass Yield - Percentage of products that pass quality inspection without rework. 2. Inspection Coverage: - Percentage of products/components inspected according to defined sampling plan. 3. Measurement Accuracy - Percentage of measurements and tests recorded correctly in the QMS. 4. Procedure Adherence Rate - Percentage of inspections performed according to standard operating procedures (SOPs). 5. Data Accuracy - Accuracy of recorded inspection and testing data in QMS. Benefits: 401(k) 401(k) matching Dental insurance Flexible spending account Health insurance Life insurance Paid time off Professional development assistance ITAR COMPLIANCE This position requires access to or use of information which is subject to the federal International Traffic in Arms Regulations (ITAR). All applicants for this position must be U.S. Persons within the meaning of ITAR. ITAR defines "U.S. Person" as U.S. citizen, lawful permanent resident of the U.S., person admitted as a refugee to the U.S., person granted asylum in the U.S., or person granted the status of alien lawfully admitted for temporary residence to the U.S. under 8 U.S.C. §1160(a) (for special agricultural workers) or 8 U.S.C. §1255(a)(1) (an amnesty program).

The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

Are you passionate about your work and want to make a hands on difference in critical industries? EaglePicher Electronic Packaging is a leading developer and manufacturer of hermetic housings and other components for the reliable, long-term protection of mission critical electronics. WE ARE GROWING OUR SOUTHBRIDGE, MA LOCATION AND WE ARE A GREAT PLACE TO WORK! We are actively seeking a Quality inspector at our Southbridge, MA facility. Candidate will perform complex inspections of assemblies and finished product for Aviation, Defense, and Space designs. Requires inspection using a microscope and some product bench testing. Responsibilities Perform simple and complex measurements in accordance with company standards and procedures. Keep accurate records of inspections on product travelers and process logs. Perform First Article Inspections (FAI's). Guide new product through the Production Part Approval Process. Perform data entry and review Quality Inspection Plans for accuracy. Approve or reject based upon relevant standards. Perform visual inspection per customer / industry requirements. Review documentation produced by the Quality Control Inspection Team. Examine and audit records for accuracy to product specifications. Comply with all EH&S requirments for work areas, including but not limited to PPE requirements for individual work areas. Qualifications U.S. Citizen or Permanent Residency required (Green Card Holder) High School Diploma or equivalent required, college or technical coursework leading to a degree or certificate is perferred 3-5 years manufacturing inspection experience (quality control) preferred (position may be filled at higher or lower grade level based on experience) Strong written and verbal communication skills Ability to work independently and as a part of team Capable of reading blueprints Strong knowledge of optical comparators Proficiency with using caliper, micrometer, drop indicator, gauges and other standard Quality measuring devices Strong basic arithmetic skills Understanding of Geometric Dimensioning and Tolerancing Standards (GD&T.) Must have strong basic computer skills. Experience with ISO9001, AS9100 or ISO13485 Quality Management Systems The salary range for this position is $19.28 - $21.82 per hour and represents the minimum and maximum for the position. The actual range will vary based upon factors including but not limited to: prior experience, knowledge, skill and education as they relate to the position's qualifications and internal equity. The posted salary range reflects just one component of our total rewards package. Other components include: PERKS OF BEING AN EAGLEPICHER EMPLOYEE Medical, dental, vision, life, and disability insurance with coverage on day one 11 paid holidays Paid vacation (PTO) Paid sick/personal time Matching 401K with vesting on day one Tuition reimbursement Dependent scholarship programs ABOUT EAGLEPICHER EaglePicher Technologies, LLC is a leading producer of batteries and energetic devices for the defense, aerospace, medical, commercial, oil, and gas industries. The company provides the most experience and broadest capability in battery electrochemistry of any battery supplier in the United States. Battery technologies include lithium ion, thermal, silver zinc, lithium carbon monofluoride, lithium thionyl chloride, lithium manganese dioxide, lithium sulfur dioxide, and reserve lithium oxyhalide. EaglePicher also provides custom battery assemblies, battery management systems, pyrotechnic devices, and other power solutions. EaglePicher Technologies is headquartered in Joplin, MO. and is ISO9001:2008, ISO 13485, and AS9100C certified. For more information, visit ******************** EaglePicher Electronic Packaging, LLC., is an Equal Opportunity Employer and does not discriminate against any employee or applicant for employment because of race, color, sex, age, natural origin, religion, sexual orientation, gender identity, status as a veteran and basis of disability, or any other federal, state or local protected class.

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions Responsible for individual Inspection activities Undergo training when necessary Adhere to policies and procedures related to specific customer requirements Ability to understand specific directions and follow guidelines that are common throughout the department Ability to maintain a constant focus on quality and accuracy Ability to work with minimal supervision Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens Obey all safety rules, use caution in work activities, and continuously practice safe behaviors Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred High school diploma or equivalent 1 year of Product Operator experience necessary Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities Understand Quality Management System (QMS) requirements Training on the specific equipment must be fully completed within 90 days of hire Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.

Job Description The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person