Quality inspector jobs in Delray Beach, FL

Johnson Service Group (JSG) is actively seeking Quality Inspector for an assignment in Miami, Florida. Direct Hire Work Requirements: Quality leadership Conduct weighing procedure in accordance with manufacturers recommended practices and procedures Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA,) is complete and required approvals have been obtained Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) Perform walk around inspection of aircraft for release from maintenance Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service Provide data to customers as requested #ESJ200 Requirements Must have an Airframe & Powerplant (A&P) Certification Must have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience Must have a minimum of 2 years' of corporate / commercial jet experience Own a basic set of hand tools with the ability to demonstrate Inventory & control of tools Have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment Have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements Have working knowledge of (FAA ,CAA. RSM/QCM, ADs, SBs, TCDS, ) Have working knowledge of return-to-service procedures Have the ability to train, coach and mentor employees in performance of their duties in areas of qualification ** Johnson Service Group (JSG) is an Equal Opportunity Employer. JSG provides equal employment opportunities to all applicants and employees without regard to race, color, religion, sex, age, sexual orientation, gender identity, national origin, disability, marital status, protected veteran status, or any other characteristic protected by law.

Thalle Construction Co., Inc. is pleased to announce a career opportunity for a Quality Control Technician on the Central Everglades Planning Project (CEPP) Everglades Agricultural Area (EAA) A-2 Reservoir in Palm Beach County, Florida. This project marks the largest contract in the Jacksonville District's history, valued at $2.87 billion. Thalle will oversee the construction of a 17.75-mile embankment dam and associated structures. This project offers potential Project Team members a valuable opportunity to broaden their professional experience and advance their careers throughout its duration. The CEPP plays a vital role in Everglades restoration, aiming to enhance ecosystem health, improve water storage, and increase resilience to climate change. Thalle, established in 1947, is a heavy civil construction company with a corporate office located in Hillsborough, NC and a regional office in Alvarado, Texas. Thalle currently has active heavy civil construction projects spanning from New York to South Florida to Texas and continuing to expand our geographical footprint. Our diverse and expansive project scope of heavy civil infrastructure projects incorporates all degrees of civil construction that includes but is not limited to; Conventional Concrete, Roller Compacted Concrete and Earthen Dams, Navigational Waterway Locks, Reservoirs, Large Diameter Underground Utilities, Treatment Facilities, Landfills, Site Work, Mass Soil & Rock Excavation, Coal Ash Closures, DOT Highway & Bridge Construction, and on demand emergency services, etc. We are a proud representative of The Tully Group (Tully) who was established in 1921 and developed into one of the nation's largest privately held, family-owned construction firms. Tully's corporate office, located in New York City, has provided an opportunity to develop and sustain a long history of heavy civil projects in the Metro New York Area and New Jersey. Visit ***************** for more information. Safety is our TOP priority! Thalle offers a competitive salary package with a full range of benefits, including Major Medical, Dental, Vision, Short and Long-Term Disability, generous PTO, paid company holidays, Life Insurance, and 401K with a company match, and more! Compensation is based on experience and qualifications. Thalle is an Equal Opportunity Employer, E-Verify, and Drug Free Workplace. Location: Palm Beach County, FL Job Title: Quality Control Technician Overview: The Quality Control Technician is responsible for full inspection of products and installation to ensure compliance with the contract plans and specifications. This position reports to, collaborates with, and follows the direction of the Quality Control Manager. Duties and Responsibilities: Inspect work during construction and during final inspection to ensure compliance with the contract documents. Provide inspection for surface preparation, concrete testing data, formwork, misc. metals, reinforcing bar, water stop, concrete finish and curing operations. Review installation plans and materials to ensure compliance with the contract document. Prepare daily field inspection reports. Report deficiencies to the project Quality Control and Operations Teams. Education and/or Work Experience Requirements: 5 (+) years' experience in the area of heavy civil works construction similar to the work being performed at this project. Ability to interpret complex construction plans and specifications. Ability to write reports using Microsoft Word or Excel. Ability to work with a fast-paced team in an aggressive construction environment. United States Army Corps of Engineers Project Experience is preferred. Strong ability to multitask, work independently under pressure, and within tight deadlines. Prior heavy civil site project experience such as water control, dam, levee, concrete, and mass excavation experience. Physical Requirements: Ability to safely and successfully perform the essential job functions consistent with the ADA, FMLA and other federal, state and local standards, including meeting qualitative and/or quantitative productivity standards. Ability to maintain regular, punctual attendance consistent with the ADA, FMLA and other federal, state, and local standards. Must be able to lift and carry up to 50 lbs. Must be able to move freely about a construction site that at times present a demanding terrain including, but not limited to climbing of ladders and stair towers, uneven and often wet surfaces, and slopes. Must be able to talk, listen and speak clearly on telephone.

Job Description The Cleaning Authority of Fort Lauderdale is looking for experienced professional cleaners who are ready to take the next step in their career - becoming trainers for our growing team! We're a trusted and well-established company, and with demand increasing, we need leaders who can coach, motivate, and guide new hires to deliver the high-quality cleanings our customers expect. What You'll Do Train new employees in the field (on-site and hands-on) Demonstrate and enforce our Detail-Clean Rotation System Ride along with new hires during their first 3 days Provide ongoing coaching and performance feedback Support office management in maintaining team standards Who We're Looking For Minimum 1 year of residential cleaning experience Strong communication and leadership skills Reliable transportation & valid driver's license Positive, team-first attitude Bilingual (English and Spanish) Pay & Benefits $17-$19/hr based on experience Paid travel time & mileage Weekly pay via direct deposit No nights or weekends Paid holidays & vacation time Career advancement opportunities (Team Leader & Supervisor roles) Why Work With Us? We value our employees and believe great training starts with great people. You'll be respected, rewarded, and a key part of our leadership team as we continue growing in Fort Lauderdale. Ready to lead and grow with us? Apply now and let's build a team that shines! Job Type: Full-time Pay: $18.00 - $20.00 per hour Expected hours: 38 - 40 per week Benefits: Fuel reimbursement Mileage reimbursement On-the-job training Paid time off Paid training Schedule: Monday to Friday Supplemental Pay: Performance bonus Tips Language: English (Preferred) Spanish (Preferred) License/Certification: Driver's License and reliable car (Required) Ability to Commute: Fort Lauderdale, FL 33312 (Required) Work Location: In person

Requirements Required Skills & Qualifications Ability to understand, speak, read and write English Self-starter and/or team player with strong verbal, written, and communication skills. Courteous professional manner when interacting with all employees. Solid technology skills with ability to utilize and learn various types of technology. Strong interpersonal skills to handle sensitive and confidential situations while demonstrating poise, tact, and diplomacy Efficient and high standards of accuracy and organization in performing tasks Strong decision making skills and ability to prioritize work; effective time management skills Analytical and problem-solving skills to find solutions to various problems; good vision, and mathematical competency Proficient in Microsoft Office, including Word, Excel, internet and email Ability to interact with all levels of the organization while maintaining integrity and strict confidentiality regarding sensitive information Solid knowledge of workplace safety regulations and procedures to ensure compliance with health and safety standards. Experienced with production tracking systems and software to monitor performance, optimize processes, and ensure efficient operations. High School Diploma or equivalent 2 years' experience in manufacturing setting Mittera is a leading-edge company that provides commercial and digital printing, finishing, graphic design, data analytics, direct mail processing, and fulfillment services. Mittera's full-service approach connects data-driven revelations, bar-raising creative, and expertly printed materials to give our customers' brand recognition it deserves. Competitive compensation and robust benefits plans are offered. Benefits include: Medical Dental Vision Life and AD&D Policies Short and Long-Term Disability 401K with Company Match Paid Time Off Paid Volunteer Time Off Location specific benefits should go here! Mittera is proud to be an equal opportunity workplace. We are committed to equal employment opportunity regardless of race, color, ancestry, religion, sex, national origin, sexual orientation, age, citizenship, marital status, disability, gender identity, or Veteran status. We also consider qualified applicants regardless of criminal histories, consistent with legal requirements. All applicants must be 18 years of age or older. Visit us today at mittera.com or stop by and fill out an application at Mittera location near you!

Job Purpose The QC Labeling Inspector is responsible for maintaining a high level of inventory accuracy and integrity within the Tissue Bank. Performs final product labeling and inspections, manages transport and storage of quarantine tissue, and maintains labeling supplies. Promotes Lean Behaviors across the organization (This includes Participating in Try storming, Brainstorming and Lean Related Initiatives). Promotes Usage of Problem Solving. Ensure that Labeling Operations are in Compliance with the State and Federal Regulations and AATB Standards. Duties and Responsibilities Preparation of the QC Labeling areas as specifically described in SOPs. Performs final inspection of products for proper specifications, label accuracy, and compliance with applicable regulations, standards and Vivex Biologics, Inc. quality requirements. Combines components for final products. Applies labels to final product and adds package inserts, boxes, etc. Maintains accurate inventory of post-processing, quarantine products (frozen and room temperature). Performs disposition of nonconforming products as directed. Coordinates and stages products for sterilization. Monitors freezers and responds to alarms. Supports nonconformance investigations, when applicable. Maintains knowledge of applicable regulations and standards related to storage, handling, labeling and inspections of tissue. Maintains effective communication with management when issues arise to obtain appropriate instructions to address the issues. Performs other duties as assigned by management. Requirements Qualifications High School/Minimum of 4 Years of Relevant Experience. Associate/Minimum of 1 Years of Relevant experience. Bachelors/Minimum of 0-1 Years of Relevant experience Working Conditions Work is indoors in environmentally controlled conditions. Overtime may be required to meet production deadlines. Some on-call and weekends may be required. Physical Requirements Able to stand for extended period. Able to lift 25 lbs. without assistance. Must be able to infrequently lift, push, pull and carry boxes weighing up to 25 pounds. Walk, squat and bend over for intervals of 15-30 minutes, with or without reasonable accommodation. Direct Reports No direct reports. Nothing in this job description restricts management's right to assign or reassign duties and responsibilities to this job any time. Vivex Biologics, Inc. is an equal opportunity employer (EEO) and expressly prohibits any form of workplace discrimination and/or harassment based on race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, transfers, leaves of absence, compensation and training. Vivex Biologics, Inc. with the Americans with Disability Act (ADA) which prohibits discrimination against qualified individuals with disabilities who, with or without reasonable accommodation, can perform the essential functions of a job.

We are seeking to recruit a Surface Quality Inspector for our location in Jupiter, Florida Strong attention to detail by visually looking at the surface quality of polished optics by using both hands to hold the optic to look thru (transmission) and in reflection to perform the visual inspection of Ø 5mm to Ø 200mm parts. Perform a visual inspection of the optical (glass) lenses against applicable standards ( i.e. ISO10110 and MIL-PRF-13830) using a high intensity light source, or indirect lighting with eye loupes, and/or microscope to identify and find any surface defects (scratches, stains, chips, fractures, etc.) on the lens after polishing or coating. Use the applicable standard to determine if the depth/width of the defect is acceptable or rejected based on the drawing specification. Visual inspection of low/moderate (standard/commercial) grade surface quality requirements (80-50, 60-40 scratch dig equivalent) which are a commonly acceptable cosmetic standards. Perform the inspection of raw glass blanks with documentation and release of material to production. Must be able to use cleaning solvents (alcohol, acetone and others) with special cloth wipes to clean, wipe, and to dissolve and remove any contaminants from the lens before and after inspection. After inspection of the optics, must be able to wrap the lens to protect from scratches, stains, chips, etc. Must be able to follow written and verbal instructions in a reliable and consistent manner. Must accurately document the description of lenses that do not meet the surface quality requirements, segregate the nonconforming parts from acceptable lenses, and to protect the rejected lens before sending to rework (internally or externally) or transferring acceptable lenses to inventory. May use various measuring instruments to measure physical dimension (in mm and inches). Must be able to escalate observed or potential lens quality or process defects to team lead or department supervisor. Must be organized, meticulous and a conscientious worker to minimize mishandling. Lenses inspected are finished product to be built into assemblies that must be handled with utmost care. Maintain contamination control and cleanliness of the area at all times. Proper safety procedures and process controls will be followed at all times when working with solvents, sharp edges and high intensity light sources. Should be an independent worker who can be focused on their responsibilities under minimal supervision with handling and processing parts quickly and efficiently before sending the lenses to coating (outside process), inventory, or to the customer. Work instructions and inspection training to be provided but individual must be able listen and ask questions, refer to the instructions and notes taken, and retain the information provided to reference back. REQUIREMENTS: High School Diploma, some college preferred. General knowledge of reading mechanical or optical blueprints/drawings. Use of measuring equipment such a caliper or dial indicators (mm and inch units). General computer skills and aptitude. Experienced in an ISO 9000 quality system work environment is preferred.

Job Summary of the R&O Quality Inspector The R&O Quality Inspector is responsible for the Quality Control of the repairs within the 145-repair station. Must adhere to the Repair Station Quality Control Manual (RSQCM), Component Maintenance Manuals (CMM), and all 14 CFR Aviation Regulations. Duties/Responsibilities of the R&O Quality Inspector Train, direct, and assist all inspection personnel performing work under the repair station certificate as directed by the Accountable Manager. Ensure the proficiency of every inspector by completing the Inspector Proficiency Checklist Form RSF-211-01. Ensure all incoming, hidden damage, preliminary, in-process, and final inspections are performed following the procedures outlined in the manual. Respond to any request for inspection of this repair station certificate. Determine the final disposition of articles failing to meet the incoming inspection review as directed by the Accountable Manager. Ensure appropriate calibrations and checks are made on the tools and equipment used by the repair station as described in the manual. Red-tag or placard any malfunctioning or non-functioning equipment. Assist Field & Tech Services with aviation technical questions. Additional duties as assigned Note: This description is an outline of the major recurring responsibilities of the job. It is not intended to be all-inclusive of the work to be performed. Other related job objectives, special assignments, and less significant responsibilities typically performed by the incumbent are not included. Required skills/abilities of the R&O Quality Inspector Read and understand drawings, manuals (CMMs), work instructions, and schematics. Use industry-standard electronics bench test equipment, i.e., Spectrum Analyzer, O-scope, multi-meter, and power supplies. Ability to read, write, and speak English. Proficient with a PC and Microsoft Office products (Excel, Word, Outlook) Computer and website navigation skills are required. Strong Customer service and communication skills Phone skills are required, as well as organizational skills Knowledge, Education, and Experience of the R&O Quality Inspector Airframe or Repairman Certification, or the ability to obtain within a six-to-twelve-month timeframe 3+ years of experience working with an AS9100 QMS 3+ years of experience in electronics or avionics installation and repair Experience dealing with Aviation OEMs is a plus General knowledge of the FAA requirements for a FAR 145 repair station is required

Job DescriptionDescription:Quality Inspector for Manufacturing (2nd Shift) - Join Our Growing Team! About Us: Decimal Engineering is a fast-paced, precision-driven manufacturing facility specializing in CNC machining and custom sheet metal fabrication for the aerospace, medical, automotive, electronics, and marine industries. With over 50 years of experience, we are committed to quality, innovation, and investing in cutting-edge technology. Why Join Us? Competitive Compensation & Benefits (medical, dental, vision, life insurance, 401k, paid vacation, holidays). Work with a Long-Tenured Team in a highly respected ISO 9001, AS9100, ITAR, and DFAR-certified facility. Career Growth & Training Opportunities in a state-of-the-art manufacturing environment. What You'll Be Doing: Conduct detailed inspections using precision measuring tools (micrometers, calipers, CMMs). Interpret design drawings & specifications to ensure compliance with quality standards. Perform raw material inspections and verify conformance. Inspect first-piece and in-process production to maintain high-quality standards. Approve finished products by confirming specifications, performing visual & measurement tests, and ensuring rework is completed correctly. Document inspection results accurately in reports and logs. Collaborate with production teams to address non-conformances and recommend corrective actions. Ensure compliance with ISO 9001 & AS9100 standards (FAIRS knowledge a plus). Assist with mechanical gauge calibration (experience a plus). #ZR Requirements:What We're Looking For: Experience in quality inspection within metal fabrication, machining, or related manufacturing industries. Proficiency in GD&T (Geometric Dimensioning & Tolerancing) and its applications. Ability to use precision hand tools (micrometers, calipers, etc.). Familiarity with CMMs (experience is a plus). Strong attention to detail & problem-solving skills with a sense of urgency. Ability to work independently & in a team-oriented environment with minimal supervision. Physical Requirements: Ability to sit or stand for extended periods and lift up to 50 lbs.

Title: Dock QC Inspector Reports to: QC Manager Type: Full-Time | Onsite | Non-Exempt Pero Family Farms is a market share leader with over a century of dedication, commitment and integrity. Operating since 1908, Pero is the farm trusted by retailers and consumers alike. We are a fully integrated farming operation, with departments that specialize in organic farming, logistics, global supply chain management, national sales operations, food processing operations, and strategic marketing functions. Our operation includes over 35,000 acres spanning across the East Coast of the United States from Florida to New York, with distribution and production facilities in several different states. We pride ourselves in maintaining a strong family heritage and tradition that has been dedicated to quality, innovation, and excellent customer service that has been feeding America's families for over a century. Our family's passion for farming remains unwavering, with a vision to continue the tradition for many generations to come, whilst maintaining the reverence and trust it has established with the American consumer. As we expand our offering to include an assortment of organic vegetable options; we have become one of the largest organic vegetable growers in the country and we are looking to grow our workforce family. Join us in continuing and strengthening our position as a market share leader dedicated and trusted by retailers and consumers alike. JOB SUMMARY Assure consistent product Safety and Quality by testing, measuring and verifying raw materials. Performance of procedures that comply with stated corporate mission and strategic plan, corporate policies, and customer product specifications. Requirements RESPONSIBILITIES AND DUTIES Color, Sizing and grade evaluation of fresh perishable produce Calibrations on weight scales, thermometers and all applicable testing tools or detectors G.M.P. monitoring of operation to assure food safe environment Color code enforcement; sanitation, organics handling, allergen control Hold and release program Rework Program Shelf-life evaluation and sensory testing as required Paperwork, filing, notifications and data entry for Team site/Quality System Other duties as required SKILLS Good communication skills, including basic written and spoken English, to ensure understanding of safety procedures and documentation Basic computer skills Microsoft Office: Excel, Word A working knowledge of English and basic math Ability to collaborate with management PHYSICAL & ENVIRONMENTAL CONDITIONS Required to stand, sit, walk for long periods of time Frequent use of hands for simple, firm grasping and writing Frequent bending, stopping, reaching, climbing Frequent lifting, carrying 5 pounds to 50 pounds Frequent use of cutting utensils (i.e. knives, peeler) Exposure to product fumes such as onions, peppers, etc. Exposure to varying temperatures of 45 degrees or less Exposure to chemicals such as chlorine, etc. Works overtime as required EDUCATION & EXPERIENCE Minimum High School education / G.E.D. preferred or applicable certification Understanding of Produce Standards, and or basic produce experience preferred Must be able to drive to outside locations for inspections; required for dock staff COMPANY BENEFITS/PERKS 401(k) Health, Dental, Vision Insurance and more Paid Time Off (PTO) The company (Pero) reserves the right to alter, amend, expand or contract these duties and responsibilities as the companies needs evolve.

LTD. (NASDAQ: FTAI) FTAI owns and maintains commercial jet engines with a focus on the Maintenance, Repair and Exchange (MRE) of CFM56 and V2500 engines. FTAI's propriety portfolio of products, including The Module Factory and a joint venture to distribute engine PMA helps make CFM56 and V2500 engine maintenance simpler, more cost-effective, significantly faster, and more environmentally friendly. Additionally, FTAI owns and leases jet aircraft which often facilitates the acquisition of engines at attractive prices. FTAI invests in aviation assets and aerospace products that generate strong and stable cash flows with the potential for earnings growth and asset appreciation. FTAI operates globally and has offices in New York, Miami, Montreal, Singapore, Dubai, United Kingdom and Ireland. JOB OVERVIEW The Lead Inspector(s) are responsible for the direct supervision performing preliminary, hidden-damage, in-process, final Inspections, and perform return to service functions on all civil aviation articles received by this repair station in accordance with the current technical data provided in the manufacturer's instructions for continued airworthiness, operator technical data, service bulletins, service letters, airworthiness directives, government and industry standard practices, and other data acceptable and/or approved by the FAA. Responsibilities: * Supervise and coordinate inspections of the maintenance, preventive maintenance, or alteration of a powerplant, aircraft or appliance, or a part thereof, received at this repair station. * Supervise and coordinate inspections and required inspections in accordance with the methods, standards, and limits required by the accepted or approved data to determine that the work was satisfactorily completed. * Audit all inspection paperwork for completeness, task compliance, and deliver finalized documents to Records Dept. * Assist and train new inspectors perform inspection tasks as specified on Company job cards, repair and routing travelers recording discrepancies as required. * Audit corrective action entries, including installed parts/material tags, tools and equipment used, proper signoff and references. * Supervise and coordinate receiving inspection on incoming parts, materials, and tooling to ensure Company standards and requirements are met and generate the applicable identification tags. * Assist in the development and training of new inspectors. Qualifications: * High School or equivalent and basic computer skills * Airframe and Powerplant license * Must possess exceptional attention to detail and proficiency in the inspection methods, techniques, aids, tools, and equipment used in aircraft jet engine maintenance. * 3 - 5 years experience in a lead role for an aircraft jet engine maintenance. * Experienced with borescope inspection and interpretation of technical data during the borecope process. * Familiar with all regulatory requirements that govern the maintenance of aircraft jet engine. * Must be able to communicate Inspection Priorities to inspection personnel in a clear and concise manner. * Be able to read, write, speak, and understand the English language. * Must be legally authorized to work in the U.S Job Demands: Work is performed in a Shop environment and requires the ability to perform extensive standing, driving, walking, and climbing; to lift up to 50lbs. regularly; to manipulate up to 100lbs. with assistance. Must be able to bend, stoop, climb to reach materials, and work in a noisy environment. Equal Opportunity Employment Statement: Our company is an equal opportunity employer. We do not discriminate against any employee or applicant based on race, color, religion, national origin, age, sex (including pregnancy), physical or mental disability, genetic information, sexual orientation, gender identity, marital status, veteran status, or any other characteristic protected by applicable federal, state, or local laws. 2nd Shift: 2:00pm-10:30pm

When applicable, Bombardier promotes flexible and hybrid work policies. Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier's Benefits Program With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: * Insurance plans * Dental, medical, life insurance, disability, and more * Competitive base salary * Retirement savings plan * Employee Assistance Program What are your contributions to the team? * Adhere to General Work Requirements as required in coordination with Quality leadership * Conduct weighing procedure in accordance with manufacturers recommended practices and procedures * Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt * Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) * Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements * Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity * Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained * Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) * Perform walk around inspection of aircraft for release from maintenance * Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service * Provide data to customers as requested How to thrive in this role? * You have an Airframe & Powerplant (A&P) Certification * You have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience * You have a minimum of 2 years' of corporate / commercial jet experience * You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools * You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment * You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements * You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc.) * You have working knowledge of return-to-service procedures * You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification This position may be eligible for up to a 5K sign-on bonus! (Terms & Conditions apply) Now that you can see yourself in this role, apply and join the Bombardier family! Bombardier is committed to being an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, national origin, genetics, age, disability status, veteran status, or any other characteristic protected by applicable federal, state or local law. Job Quality Inspector Primary Location Opa Locka Service Center Organization Learjet Inc Shift Employee Status Regular Referral Amount $2,000.00 Requisition 2483 Quality Inspector Nearest Major Market: Miami

ATTENTION MILITARY AFFILIATED JOB SEEKERS - Our organization works with partner companies to source qualified talent for their open roles. The following position is available to Veterans, Transitioning Military, National Guard and Reserve Members, Military Spouses, Wounded Warriors, and their Caregivers. If you have the required skill set, education requirements, and experience, please click the submit button and follow the next steps. Why join us? Bombardier is a global leader in aviation, focused on designing, manufacturing and servicing the world's most exceptional business jets and specialized mission platforms. Bombardier has been successful in setting the highest standards because we are a people-centric business that fosters passion, diversity and authenticity. Prioritizing employee growth and development, we empower everyone to reach their full potential on their own terms. Bombardier's Benefits Program With our employees' well-being top of mind, we offer a comprehensive and competitive Benefits Program, which includes the following: Insurance plans Dental, medical, life insurance, disability, and more Competitive base salary Retirement savings plan Employee Assistance Program What are your contributions to the team? Adhere to General Work Requirements as required in coordination with Quality leadership Conduct weighing procedure in accordance with manufacturers recommended practices and procedures Upon A/C arrival, obtain associated documentation, complete A/C records and document receipt Coordinate inspection activities in compliance with computer tracking maintenance programs (i.e. CAMPS, AVTRAC) Perform inspections of aircraft, engines, parts and components using precision tools, equipment and other materials in accordance with applicable regulatory requirements Upon receipt, perform inspection of all new, repaired and rebuilt parts/components for evidence for physical damage, count and conformity Ensure all work packages (orders and forms) as well as records of arrival, maintenance and corrective actions performed, are documented accurately and that all specialized customer (RED, RFE & SRPSA)and regulatory paperwork (FAA, FAR/CAA, etc) is complete and required approvals have been obtained Research aircraft drawings and technical data (i.e., REO, ENICO, EO. DCN) Perform walk around inspection of aircraft for release from maintenance Perform return to service process and ensure assigned aircraft meets all airworthiness requirements prior to return to service Provide data to customers as requested How to thrive in this role? You have an Airframe & Powerplant (A&P) Certification You have a minimum 3 years' aircraft maintenance experience or substantiated equivalent experience You have a minimum of 2 years' of corporate / commercial jet experience You own a basic set of hand tools with the ability to demonstrate Inventory & control of tools You have the ability to use a variety of measuring and basic hand tools to interpret/operate test equipment You have the ability to interpret/ process all relative (foreign & domestic) regulatory documents, actions and requirements You have working knowledge of (FAA Regs, CAA. RSM/QCM, ADs, SBs, TCDS, etc.) You have working knowledge of return-to-service procedures You have the ability to train, coach and mentor employees in performance of their duties in areas of qualification This position may be eligible for up to a 5K sign-on bonus! (Terms & Conditions apply) You have an Airframe & Powerplant (A&P) Certification

Job Posting Title: QC Inspector, Heavy Maintenance Reports to: Manager, Quality Control The QC Inspector - Heavy Maintenance ensures compliance with Global X's Continuous Airworthiness Maintenance Program (CAMP) and FAA regulations. This role is responsible for inspections, surveillance, and audits of heavy maintenance activities to ensure aircraft airworthiness prior to release. The inspector serves as the on-site Quality representative during heavy maintenance events and collaborates closely with vendor personnel, Maintenance Control, and Engineering teams. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES: Perform Line Maintenance, Remain Over Night (RON), and Receiving Inspections (RI). Monitor maintenance work, workmanship, and materials to ensure compliance with Global X procedures and FAA regulations. Conduct Required Inspection Item (RII) in-process inspections and review related documentation. Audit completed aircraft records (e.g., logbook pages, work cards, non-routines, engineering documents). Oversee Heavy Maintenance or Special Maintenance visits. Perform Borescope inspections when qualified. Review and approve work documents for accuracy and completeness. Record discrepancies in logbooks and non-routine forms. Provide “buy-back” of RII and non-RII maintenance actions. Approve return-to-service for maintenance, preventive maintenance, and alterations. Issue airworthiness releases (AWR). Reject unsatisfactory work and non-conforming parts during inspection. Prepare and issue audit reports identifying risks, corrective actions, and compliance gaps. Conduct inspections and audits of contractors, repair vendors, overhaul services, fueling, deicing, and parts suppliers. Follow all company and safety regulations to maintain a safe work environment. Perform other duties as assigned by the Director of Quality Control. SKILLS AND QUALIFICATIONS: Valid FAA Airframe & Powerplant (A&P) license held for at least 5 years. Proficiency with TRAX maintenance software. Documented inspection experience, including RII Authorization. Preferred: prior experience with NDT methods (Liquid Penetrant, Eddy Current, Borescope). Strong analytical, problem-solving, and communication skills. Experience with aircraft parts and materials handling. WORK LOCATION AND SCHEDULE: This is a full-time, salaried position based at our Miami base. The QC Heavy Maintenance Inspector will travel regularly to vendor facilities and maintenance sites where heavy checks are performed. The role requires flexibility in scheduling, including evenings, weekends, and holidays, to support operational needs. Travel may be domestic or international depending on where heavy maintenance events are conducted. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to stand; walk; use hands to finger, handle or feel; and reach with hands and arms. The employee is occasionally required to sit, climb, balance, stoop, kneel, crouch or crawl. The employee must frequently lift and move up to 25 pounds and occasionally lift and move up to 70 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. OTHER DUTIES: Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities, and activities may change at any time. Global Crossing Airlines provides equal employment opportunities to all team members and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. This policy applies to all terms and conditions of employment, including recruiting hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job Details Corporate Headquarters Miami - Doral, FLDescription For nearly 30 years, DASI has been in the business of providing comprehensive aircraft inventory support for airlines, MROs, OEMs, and distributors. Headquartered in Miami, Florida, with service centers in London and Singapore, DASI is a truly global partner, serving customers' parts and inventory needs in more than 140 countries. DASI is embracing the potential of online sales and their digital marketplace, which has been growing exponentially and has tremendous potential with the right technology team in place to support and take it to the next level. Purpose: At DASI, the role of the QC Inspector is to ensure that all incoming and outgoing material is being checked for compliance to customer and/or DASI standards. Key accountabilities: Investigate NCM (Nonconforming Material). Control the segregation and proper disposition of material designated by the Material Review Board. Collect data for QA to use in training and performance evaluation of inspection staff. Coach Inbound and/or Outbound inspection teams to recognize errors and areas for improvement. Scrap process as required. Participate in Continuous Improvement Projects (CPAR's). Perform all other duties as assigned. Key skills and competences: Focus on delivering exceptional customer service. A pro-active team worker with warehouse experience ideally in an aerospace related business Ability to be flexible, responsive and enthusiastic. Able to cope well under pressure and resolve issues and problems using their own initiative. Able to work effectively to tight deadlines and targets. Looking for a challenging role in which they can develop personally and professionally. Results driven, taking pride in achieving objectives. Ability to work in a fast-moving environment where a pro-active, can-do attitude is needed to achieve goals. Experience and qualifications: High school diploma or equivalent required. Minimum 2 years of processing aviation surplus parts is required. ISO and/or AS Quality Standard knowledge, a plus. DASI, LLC. and group companies are an Equal Opportunities Employer

Miami Air International, with its modern fleet of Boeing 737 aircraft, is the premier provider of private group air transportation, commonly called chartered flights. It's not just a flight. This is a travel experience that is tailored to delight your group. We understand that each group is unique and personalizing the right services and flight amenities is critical, and at the heart of why you are considering a charter. All we do is charter. And we do a lot! Our business is built to only serve groups like yours, and you are our number one priority. In addition to concentrating our efforts on being the best in those things you want from any airline - like industry leading safety-programs and over 25 years of proven reliability and financial stability - we provide a suite of services unparalleled by any other airline. Sound like a match? You're in luck. Miami Air is currently seeking a highly motivated and personable individual to join the company as a Quality Control Inspector responsible for the efficient and economic determination of the airworthiness of aircraft, engine, appliance and component maintenance actions as assigned, and conduct inspections in accordance with the Maintenance Program, AD, SB or other requirement to ensure aircraft, engines, appliances and components are maintained to a prescribed standard in order to continue their airworthiness. Functions & Responsibilities Perform preliminary, in progress, hidden damage, and final inspections. Performs special inspections as detailed by the requesting or requiring document. Performs Required Inspection Item (RII) and Buy Back inspections. Perform receiving inspections to ensure the use of legal, conforming and applicable parts and materials. Ensure that inspections and surveillance are performed as required on necessary maintenance actions in order to assure the use of approved data, material, tools, test equipment and that high standards of workmanship are present. Provide guidance and assistance to maintenance personnel in order to train, maintain and enhance compliance to programs, policies and procedures. Conduct daily audits of aircraft work packages including checks/inspections forms, log pages, routines and non-routines, modification orders, etc. to ensure completion, correctness, use of appropriate references to approved data in all entries and forms. Review the aircraft and engine logbooks, using the same criteria as described in item f above, at checks and during accomplishment of any maintenance. At the appropriate checks, transcribes all pilot reports and deferred maintenance items to the appropriate work forms. Conduct records analysis of audits and reviews of data/information for continuing analysis and surveillance reports as identified by the Manager, QC/QA & Training. Lead and maintain the current the Structural Defect Log as assigned. Review and address the calibrated tools and equipment status and shelf-life status and ensure correction of any discovered discrepancies during the first 10 days of each month. Perform as a “Designated Instructor” in areas and/or on subjects as qualified and approved by the Manager, Maintenance Training and QA. Perform the inspections of S.O.S. Tag items and documents results per the S.O.S. program. Complete safety and housekeeping checks of hangar and line work areas on a routine basis as designed and assigned by the Manager, QC/QA & Training. Perform other duties as necessary within the scope of quality. Qualifications & Requirements Associate degree A&P Mechanic License Airman's Certificate with A&P ratings for a minimum of 3 years. 3 years of experience as licensed A&P mechanic with 2 years of maintenance experience on large aircrafts. Boeing 737 experience, Classic and NG preferred. ETOPS and RVSM operations experience. Knowledgeable of the FARs, GMM, Maintenance Programs. Excellent written and oral communication skills. Proficient with Microsoft applications. Knowledge of TRAX systems, a plus. Knowledgeable of manuals and publications skills, a plus. Miami Air International provides equal employment opportunities to all legally eligible and authorized to work applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws.

Quality Control Inspector Immediate need for a Quality Control Inspector for a manufacturing and construction company in Miami, FL to join our team. The ideal candidate will play a crucial role in ensuring that our products meet or exceed industry standards and customer expectations. RESPONSIBILITIES: * Ensure all products and processes comply with AISC, company, and industry quality standards. * Inspect raw materials, in-process components, and finished steel products through visual checks, measurements, and NDT methods to verify conformance to specifications. * Perform inspections on fabricated and erected steel structures to confirm compliance with design and detailing requirements. * Document and report inspection findings, nonconformities, and root cause analyses; collaborate with production and engineering teams to implement corrective and preventive actions. * Participate in design and scope reviews, validation, and final product approval processes. * Maintain quality documentation, inspection records, and provide data for management review meetings. * Support continuous improvement initiatives to enhance product quality, process efficiency, and safety compliance. * Ensure adherence to all AISC quality assurance procedures, regulatory requirements, and company safety policies. * Contribute to training, audits, and professional development activities as needed. QUALIFICATIONS: * 2+ years' experience with Structural Steel required. * Knowledge of AISC Process. * Detail oriented with ability to multi-task in a fast-moving environment with shifting priorities and changing requirements. * Fluent in the English language, in both oral and written form, required, bilingual in the Spanish language preferred. * Leadership abilities and able to identify and resolve problems. * Strong proficiency with Microsoft Office tools required. * Proficient in the ability to read and interpret drawings and technical documentation; and * Ability to work well under pressure and be able to assist in expediting shipments when necessary, working in conjunction with Production and Shipping schedules. * Ability to foster and promote a positive work environment. EDUCATION/TRAINING/EXPERIENCE: * 3+ years of responsibility in quality management required; within a manufacturing environment preferred. * Experience working in a manufacturing environment preferred. * Must have experience using various mechanical inspection tools, such as computers, micrometers, height gauge, radius gauge, pin gauges, protractors, and calipers. * Experience working with machined parts, assemblies, and/or sub-assemblies preferred. * Civil or Industrial Engineer preferred. BENEFITS: * 401(k) with matching contributions * Health insurance (medical, dental & vision) * Paid time off

Quality Control Inspector Miami International Airport Quality Control Inspectors report to the Quality Manager. This position requires certification under FAR Part 65, subparts D, E and acceptable training and experience. A minimum of three years documented verifiable experience or acceptable training on Transport Category Aircraft (including military types) is preferred. [FAR: 65. Subpt-D, 65. Subpt-E]. Duties and responsibilities include: Ensuring that aircraft maintenance work, materials and practices conform to the regulations and company policies and procedures. Reviewing paperwork, including maintenance forms, parts tags, work cards, maintenance orders and log sheets, etc. for proper completion per company requirements. Perform facility audits, work in progress audits and ramp and stockroom checks for cleanliness and organization. Coordinating RII inspection requirements for scheduled work. Accomplishing RIIs in accordance with the company procedures. Performing receiving inspection of parts, materials and components to ensure conformity with company requirements. Perform routine inspections of company tooling for condition, security and calibration. Making recommendations to overcome deficiencies in procedures, manuals or with aircraft or equipment. Performs additional duties and responsibilities as directed in other company manuals such as the Fueling and CASS Manuals. Perform any additional duties and responsibilities as directed by the Quality Manager or Director of Quality. Requirements Qualifications and Requirements Must hold a current Airframe & Powerplant license. Must be flexible to work any shift as necessary including weekends and holidays. Must be legally authorized to work in the United State and able to acquire airport security clearance. Must be fluent in the English language (written and spoken). Must be willing to travel on short notice. Have Boeing 767 aircraft maintenance experience, or equivalent experience working on wide body aircraft. Have at least two years of Quality control experience (preferred). Have strong analytical skills. Able to read and understand technical documents (AMM, IPC's SRM's, EO's, AD's, etc.) Able to identify problems, collect data, and develop corrective actions. Able to interact with Federal Aviation representatives. Physical Requirements. Must be able to lift 25 pounds.

: Fly Alliance is a Part 135 and Part 145 industry leading private aviation group specializing in private jet charter, jet card memberships, aircraft sales, management, parts, and maintenance. Dedicated to providing unparalleled luxury, safety, and efficiency in air travel, the company has close to 30 aircraft, 6 offices across the country, and over 200 employees supporting a global operation. Three consecutive years as a top 20 U.S. operator, Fly Alliance continues to redefine the private aviation landscape. Role Objective: Responsible for the return to service of all assigned articles to include completion of all work orders and all other required documentation from pre-planning to delivery of the aircraft. Physically inspect aircraft, aircraft components, and review paperwork to ensure that workmanship meets acceptable standards of quality, and that customer aircraft are returned to service in an airworthy condition with all required documentation properly completed and filed. Major Duties and Responsibilities: Determine inspection status of aircraft in for scheduled inspection, as assigned. Audit of inspection and maintenance work packages generated by the repair station during the performance of maintenance and repair. Work with production personnel, Team Leaders, Lead Technicians and Technicians to ensure accurate and complete documentation of work performed in company work order packages. Generation of maintenance record entries and Log Book Entries for aircraft, engines, propellers, and accessories maintained by the repair station in accordance with 14 CFR Part 43 and the requirements of this repair station manual. Includes completion of FAA forms 337 and 8130-3 as required. Assist in surveillance of the repair station facilities and procedures and report results to the Inspector. Assist the Quality Assurance Manager and Chief Inspector in the development of improved methods and procedures for the performance of quality assurance functions. Assist the Quality Assurance Manager and Chief Inspector in the maintenance of the technical publication libraries throughout the repair station. Assist the Quality Assurance Manager and Chief Inspector in the tracking and calibration of inspection and test equipment used by the repair station for the purpose of product acceptance. The proper execution of Malfunction or Defect Reports, FAA Form 8010-4 when required. This report will be submitted to the FAA within 96 hours after the malfunction or defect has been discovered in accordance with 14 CFR§145.221. Assist the Quality Assurance Manager and Chief Inspector as necessary in the receiving inspection of parts or material forwarded to them by the receiving inspector. Assuring proper documentation of the preliminary inspection, hidden damage inspection, and final inspections of all items processed as assigned. Make entries into maintenance logs & work orders IAW 14 CFR Part 43 and Operator/Air Carrier manuals. Maintaining Quality Department work areas in a clean and orderly manner. Assist the Quality Assurance Manager and Chief Inspector as directed. Work Conditions & Physical Requirements: The employee must occasionally lift and/or move up to 50 pounds Stands at least 75% of each workday. Other motions: standing; walking; repetitive motion hand - wrist; fingering; grasping; feeling; handling; hearing; talking; seeing; eye-hand coordination. High organizational, time management and logic skills required Ability to work at a desk in an office environment for extended periods of time Availability during nights, weekends, & holidays as needed. Must be capable of maintaining a flexible schedule, including the willingness to occasionally work extended hours as per project demands and organizational needs. Travel: Some travel is required. Direct Reports: This role has no direct reports. Work Authorization: Must be authorized to work in the United States of America. Requirements Knowledge, Skills and Abilities: Knowledge of inspection techniques and tools within an FAA 145 repair station. Thorough understanding of FAR's and regulations pertaining to aircraft maintenance part 145. High mechanical aptitude. Ability to read schematics and blueprints. Be proficient with PC and be familiar with MS office. Knowledge of quality control. Ability to interact with a group of coworkers. Ability to work with complex equipment. Ability to establish procedures. Ability to work in a production-oriented environment. Ability to work under frequent changing priorities. Ability to select and evaluate priorities. Ability to read and comprehend documentation written in the English language. Problem-solving and decision-making skills. Good written and verbal communication skills. Self-starter with the ability to multi-task and prioritize workday/projects independently. Ability to travel. Required Education/Experience: Minimum ten years of experience in maintaining aircraft with verifiable practical experience as an active aircraft mechanic in a maintenance organization. Minimum of five years of experience in a supervisory position in a maintenance organization. Minimum of five years of experience in a Part 145 environment. Must have a thorough working knowledge and understanding of FARs, aircraft technical bulletins, service bulletins, airworthiness directives, aircraft systems, and the ability to communicate this knowledge to the required persons. Previous Director of Maintenance or Chief Inspector experience preferred. FAA Airframe and Power Plant Certification or license (A&P) Must have and maintain a valid driver license and must meet the company's vehicle insurance requirements. Subject to pre-employment and random drug testing. Must pass a background check.

GotWorX, Inc. Is currently seeking a Quality Control Inspector for our client based in the Tamarac area. This is a temp-hire opportunity for the right candidate. Client is currently offering a salary of $ 18 pay rate, plus a benefits package once perm employee! Overview: The Quality Control Inspector ensures that incoming, in process, and finished parts are within all required specifications per drawings and work instructions. It is the Quality Control Inspector s responsibility to implement good documentation practices (GDP) and proper material identification, preventing nonconforming material from continuing through the process without proper approval, to ensure that the customer gets parts that function properly every time. Responsibilities: Performs area specific internal quality audits Performs area specific 5S audits Performs random in-process audits in designated areas Performs first piece inspection audits for team members as required Maintains and stores inspection equipment appropriately Verifies presence of calibration sticker before using measurement device Notifies manager of equipment with past due calibration Notifies manager of calibrated items that need attention Reviews and provides feedback on procedures, policies, and processes Applies proper sampling methods (AQL) managing risk and cycle time Interprets and inspects mechanical drawings (GD&T literate) Maintains all inspections records or other required documentation Coordinates, implements, and documents containment actions Actively supports conducting root cause investigations In order to be considered, we require: High School Diploma or GED required Prior experience in quality control field preferred Prior inspection experience preferred Prior forklift experience preferred Prior machining / CNC experience preferred Prior SAP experience preferred Candidates will be required to complete a background check and drug screen before beginning work.