Quality inspector jobs in Greenburgh, NY

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: Supporting Incoming, in-process and final inspection including customer source inspections Obtaining and upholding IPC credentials required of the position. Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. Verifying compliance of in-process material against Customer and Industry Standards Ensuring documentation is accurately recorded and collected. Escalating systemic issues to Quality and Manufacturing Engineering Supporting first-piece verification runs with accompanying documents. Documenting non-conformities to the process and specifications Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. Advocating proper ESD, PPE, and FOD prevention Required Qualifications: Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment J-STD-001 Class 3 and/or IPC 610 certified Physically able to spend up to 8 hours a day using a microscope Familiarity with IPC Industry Standards High-School Diploma Preferred Qualifications: Experience working in an ISO-9001 and/or AS9100 Quality System environment Operating appropriate inspection equipment; (AOI, XRAY, etc.…) Ability to communicate openly and effectively to provide real-time feedback Ability to work in a fast-paced team environment Customer-Focused, "Zero-Defect" Mindset Documentation Abilities Computer literacy Industry-Relevant Quality Inspection or Control experience Willingness to cross train in multiple Quality areas Job Details Fulltime Equivalent Job Grade Range for this Position: $38,300.00 - $76,600.00 annual salary for in-office or hybrid employees in FL, GA, IN, AZ, AL, MD or TX, and all remote employees $42,900.00 - $85,800.00 annual salary for in-office or hybrid employees in VA, CA, NH or MA $45,200.00 - $90,400.00 annual salary for in-office or hybrid employees in NJ This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.

**Food Technologist - 2nd Shift** **Shift:** 4:00 PM - 1:00 AM (must be flexible to stay past 1:00 AM as needed) **Schedule:** Monday-Saturday (subject to change based on production demand) **Industry:** Frozen Food Manufacturing Book a time to discuss this opening immediately: ************************************************************************ **About the Company** We are a **family-owned and operated frozen food manufacturer** , specializing in the production of Jamaican Beef Patties. Our facility is located in Tappan, NY, and is experiencing rapid growth and expansion. We pride ourselves on maintaining high standards of food safety, quality, and operational excellence. **Position Summary** We are seeking a **Food Technologist** with a minimum of **3 years of experience in a USDA-regulated facility** to join our **2nd shift Quality Control team** . This role is critical in ensuring that our products meet stringent quality and safety standards through routine testing, documentation, and collaboration with production teams. **Key Responsibilities** + Enforce **HACCP** , **GMPs** , and **Safety Standards** across the facility. + Conduct **pre-operational, operational, and post-operational checks** . + Perform **routine facility walkthroughs** and communicate findings to the QC Manager. + Participate in **internal and third-party audits** . + Review and verify **daily food safety and quality control records** . + Maintain and improve **SOPs** , **SSOPs** , and **prerequisite programs** . + Oversee sanitation tasks per the **Master Sanitation Schedule** . + Supervise **line checkers and QC assistants** to ensure timely and accurate testing. + Monitor **supplier performance** , conduct **ATP and allergen control testing** . + Review **labels and raw materials** for compliance. + Investigate and resolve **customer complaints** . + Maintain accurate documentation and ensure calibration of testing instruments. + Assist in **mock recalls** , special projects, and employee training. **Qualifications & Requirements** + Bachelor's Degree in **Food Technology** , **Food Science** , or related field preferred. + Minimum **3 years of experience** in a USDA-regulated food manufacturing environment. + Strong knowledge of **SQF** , **GMPs** , **HACCP** , **SOPs** , **SSOPs** , **USDA/FDA regulations** , and **Pest Control Programs** . + Proficiency in **Microsoft Word** , **Excel** , and **data entry software** . + Excellent **communication** , **documentation** , and **customer service skills** . + Ability to work flexible hours and adapt to production demands. **Work Environment & Team Structure** + You'll report to **Raquel and Sandra** , QC leads on the 2nd shift. + The QC team includes a **QC Director** , **QC Manager** , **QC Technicians** , and **Line Checkers** . + Dress code: **Clean non-slip shoes** , **jeans or khakis** , and a **company-provided lab coat** . + Fast-paced, collaborative environment with a strong focus on food safety and quality. **Employee Value Proposition** + Opportunity to grow with a **rapidly expanding company** . + Competitive benefits including **Medical, Dental, Vision, and 401(k)** . + Be part of a team that values **quality, integrity, and innovation** . **Job Type & Location** This is a Contract to Hire position based out of TAPPAN, NY. **Pay and Benefits** The pay range for this position is $31.25 - $36.06/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) **Workplace Type** This is a fully onsite position in TAPPAN,NY. **Application Deadline** This position is anticipated to close on Dec 19, 2025. **About Aerotek:** We know that finding work is hard, and finding meaningful work is harder. Aerotek connects 180,000+ light industrial and skilled trades workers with 14,000+ employers each year, helping our workers navigate an evolving labor market and find jobs that meets their goals, skills and interests. Since 1983, we have provided a variety of career opportunities across North American industry - from short-term assignments at Fortune 500 companies where you can build your skills, to long-term opportunities where you can play a vital role solving for companies' construction, manufacturing and maintenance challenges. Our 1,500+ experienced recruiters across 250+ offices work relentlessly to put our workforce in a position to thrive. Let us rise to meet your challenges and put our people-are everything spirit to the test as your career continues to grow. Aerotek offers weekly pay, employee benefits including medical, dental & vision, life insurance, health advocacy and employee assistance programs, a 401(k) plan, and employee discounts. The company is an equal opportunity employer and will consider all applications without regards to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law.

Full-time Description A Quality Control Technician II is responsible for ensuring that products and services meet the established standards set by the company. Duties include maintaining strong overall quality control of products made by the company adhering to reliability, performance, and customer expectation. Performs incoming inspections of raw materials, customer supplied raw materials, returned goods and special components. Performs finished good inspections. Performs start-up and in process inspections. Monitors specific areas of production as directed by the Quality Control Supervisor. Makes measurements and records data as per inspection forms or job cards. Performs testing and records data for statistical process control (SPC) during manufacturing, (when required). Communicates with Quality Control Supervisor any occurrences of non-conforming product, out of control process or any other items of concern. Communicates with Manufacturing Engineers any occurrences of tests failing engineering limits or any other items of concern. Performs computer set up for label printing programs on cutting lines. Assists Engineering as needed for experimental testing. Enters finished goods inspection data into BMS as appropriate. Any other duties as assigned by supervisor. Requirements Excellent organizational skills and attention to detail. Must have good documentation practice. A proven understanding of part workmanship. Ability to handle numbers required. Strong interpersonal skills. Ability to use micrometer, computers, testing equipment and electronic balance is essential. Experience using Excel is preferred. Ability to speak, read, and write in English. Education & Experience High school diploma or equivalent. Working Conditions While performing the duties of this job, the employee occasionally works near moving mechanical parts and is occasionally exposed to wet and/or humid conditions, ambient air, fumes, or airborne particles. The noise level in the work environment is usually moderate. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Candidate must be able to perform the physical responsibilities of the job utilizing arms, hands, and fingers to perform complex functions of manufacturing parts and performing other duties of the job, e.g., standing, sitting, walking throughout the facility and stairs, bending, squatting, and kneeling, etc. Ability to lift items weighing up to 15 lbs. Pay: $22.00-$24.00/hour Benefits: Eligible after 1st day: Paid holidays Employee Assistance Program Eligible after 90-day probation period: Medical, Dental, Vision, Basic Life/AD&D Insurance, Voluntary Term Life/AD&D Insurance Health Savings Account (HSA), Flexible Spending Account (FSA), Dependent Care Account, Commuter Transportation Management Account Vacation time Sick time Eligible after 1 year of service: 401(k) with Employer Match Potential for discretionary bonus The final pay offered to a successful candidate will be dependent on several factors that may include but are not limited to the type and years of experience within the job, the type of years and experience within the industry, education, etc. We're proud to be an equal opportunity employer. This means we actively pursue ways to celebrate our differences and don't discriminate based on an individual's race (including traits historically associated with race, such as hair texture, hair type, and protective hairstyles including braids, locks, and twists), creed, national origin, nationality, religion, ancestry, age (40 or over), sex (including pregnancy), familial status, marital status, civil union or domestic partnership status, affectional or sexual orientation, gender identity or expression, mental or physical disability (including perceived disability, AIDS, and HIV status), atypical hereditary cellular or blood trait, genetic information, because of liability for service in military, status as a smoker or non-smoker, status as a registered medical marijuana user, or any unlawful criterion existing under applicable federal, state, or local laws. If you need assistance or an accommodation due to a disability, contact us at **********************.

Job Description General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). Verify material certifications, supplier documentation, and compliance with required standards. Record and maintain inspection results, nonconformance reports, and supplier performance data. Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. Control of MRB and quality hold areas. Follow and support ISO 9001:2015 quality management processes. Ensure inspection tools and gauges are calibrated and in good working condition. Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required Minimum 2-4 years of experience in a quality control or inspection role. Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. High School Diploma or equivalent required. Technical or trade school training in mechanical inspection, or a related field is preferred. Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. Proficient in the use of precision measuring instruments and inspection equipment. Understanding of material certification requirements and industry quality standards. Experience with CMM operation and basic programming a plus. Strong attention to detail and accuracy in record-keeping. Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary Microsoft Office Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements Ability to stand for extended periods during inspections. Ability to lift up to 50lbs. occasionally.

General Purpose The Incoming Inspector is responsible for the inspection and verification of incoming raw materials, components, and outsourced parts used in HYTORC's electric and hydraulic tools. This role ensures that all incoming products meet the required specifications, quality standards, and documentation requirements . The Incoming Inspector will work closely with suppliers, purchasing, and quality teams to resolve quality issues and maintain compliance with industry standards. Essential Duties and Responsibilities * Inspect and verify incoming raw materials, machined components, and subassemblies for compliance with engineering drawings, specifications, and quality requirements. * Perform dimensional inspections using precision measurement instruments (calipers, micrometers, height gauges, bore gauges, Comparators, CMM). * Verify material certifications, supplier documentation, and compliance with required standards. * Record and maintain inspection results, nonconformance reports, and supplier performance data. * Work closely with Quality Control, Purchasing, and Engineering to address discrepancies or nonconforming materials. * Segregate and label nonconforming materials, coordinating with purchasing for supplier returns or corrective actions. * Control of MRB and quality hold areas. * Follow and support ISO 9001:2015 quality management processes. * Ensure inspection tools and gauges are calibrated and in good working condition. * Maintain a clean, organized, and safe work area in accordance with company policies. Supervisory Responsibilities None Education/Experience Required * Minimum 2-4 years of experience in a quality control or inspection role. * Experience in the inspection of mechanical components and assemblies, preferably for industrial tools or related equipment. * High School Diploma or equivalent required. * Technical or trade school training in mechanical inspection, or a related field is preferred. * Ability to read and interpret engineering drawings, blueprints, and GD&T specifications. * Proficient in the use of precision measuring instruments and inspection equipment. * Understanding of material certification requirements and industry quality standards. * Experience with CMM operation and basic programming a plus. * Strong attention to detail and accuracy in record-keeping. * Familiarity with ISO 9001:2015 quality systems preferred. Computer Skills Necessary * Microsoft Office * Experience with CMM software (e.g., Wenzel, Mitutoyo, Zeiss, or equivalent). Physical Demands/Requirements * Ability to stand for extended periods during inspections. * Ability to lift up to 50lbs. occasionally.

The Quality INSEPCTOR position will be responsible for inspection of all incoming raw materials and finished products. Tasks will require use of calipers, micrometers, gauges, optical comparator, drawing comparisons and other inspection tools - candidate MUST have experience with relevant equiptment. Report, analyze and trend quality data (i.e. non-conforming material and inspection results). Work directly with suppliers to address quality concerns and assess performance. Responsible for specific quality programs as assigned, other related responsibilities as follows: Ensures company standard practices and cGMP procedures are followed. Issue Batch Records to production and Finished Good inspection records to Operations Maintains SOP binders and updates such through approved Change Controls. Participate in internal and external audit process Inspect and evaluate all incoming components and labeling Inspection and testing of finished goods Authorize release of Quarantined components for production use Responsible for calibration schedules for testing and production equipment PROVIDE SALARY HISTORY TO BE CONSIDERED Qualifications Relevant quality experience along with cGMP and 2 years experience preferred. Experience with FDA compliance regulations a plus Additional Information To be considered you MUST provide the following: Current resume Full Salary History Salary & Benefits : Salary will be based on experience Medical Benefits package available Schedule - F/T Monday to Friday 7:30 to 4:00 pm PLEASE NO RECRUITERS OR SOLICITATIONS! All your information will be kept confidential according to EEO guidelines.

Performs inspection and monitoring of all incoming materials that require inspection, including but not limited to packaging, chemicals, subassemblies, mechanical and electrical components. They are inspected in accordance with FDA/GMP requirements and established company SOPs and specifications. Responsibilities Key Accountabilities: Inspects materials and products, for conformance to specifications, using fixed or preset measuring instruments and/or analysis of vendor supplied documentation Normally pursues a defined course of training to develop professional capabilities and skills in such areas as, but not limited to, GD&T (geometric dimensioning and tolerancing), FDA/GMP and SOPs Ensures materials and products are in accordance with established tolerance levels for quality and performance and are not irregular or damaged. Relies on instructions and pre-established guidelines to perform the functions of the job. Works either under a supervision or higher-level inspector Primary job functions do not typically require exercising independent judgment Inspects of all incoming materials or chemicals Collects data and subsequent disposition of goods in SAP Placement of Bar Code labels on all in-coming material and the use of Bar Code Reader Reading and understanding of drawings or blueprints Maintains good general housekeeping in warehouse and inspection area At direction of Supervisor or Manager will perform special assignments as necessary All other duties as assigned by manager Internal Networking/Key Relationships: To be determined based on department needs Skills & Capabilities: Must have basic math skills and concepts. Qualifications Minimum Knowledge & Experience Required for the Position: High School diploma or equivalent, with a minimum of 2 years of experience in a manufacturing operations role. International Mobility Required: No Travel Requirements: No The hourly wage range Werfen reasonably expects to pay for the position is $22 to $25. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business.

Performs inspection and monitoring of all incoming materials that require inspection, including but not limited to packaging, chemicals, subassemblies, mechanical and electrical components. They are inspected in accordance with FDA/GMP requirements and established company SOPs and specifications. Responsibilities Key Accountabilities: Inspects materials and products, for conformance to specifications, using fixed or preset measuring instruments and/or analysis of vendor supplied documentation Normally pursues a defined course of training to develop professional capabilities and skills in such areas as, but not limited to, GD&T (geometric dimensioning and tolerancing), FDA/GMP and SOPs Ensures materials and products are in accordance with established tolerance levels for quality and performance and are not irregular or damaged. Relies on instructions and pre-established guidelines to perform the functions of the job. Works either under a supervision or higher-level inspector Primary job functions do not typically require exercising independent judgment Inspects of all incoming materials or chemicals Collects data and subsequent disposition of goods in SAP Placement of Bar Code labels on all in-coming material and the use of Bar Code Reader Reading and understanding of drawings or blueprints Maintains good general housekeeping in warehouse and inspection area At direction of Supervisor or Manager will perform special assignments as necessary All other duties as assigned by manager Internal Networking/Key Relationships: To be determined based on department needs Skills & Capabilities: Must have basic math skills and concepts. Qualifications Minimum Knowledge & Experience Required for the Position: High School diploma or equivalent, with a minimum of 2 years of experience in a manufacturing operations role. International Mobility Required: No Travel Requirements: No The hourly wage range Werfen reasonably expects to pay for the position is $22 to $25. Compensation is reasonably based upon multiple factors including education, relevant experience, skillset, knowledge, and specific needs of the business.

Description: Construction Quality Assurance Inspector West Point, NY Crawford Consulting Services, a Woman Owned Small Business (WOSB), provides cost estimating, scheduling, value engineering and construction management services to assist in the delivery of mission critical projects around the world. Job Description The Quality Assurance Construction Inspector (QA Inspector) is responsible for ensuring that construction work performed on US Army Corps of Engineers projects meets quality standards, complies with contract specifications, and adheres to safety and environmental regulations. The position requires a strong understanding of construction practices and USACE standards. The QA Inspector will provide technical oversight, monitor construction activities, document compliance, and facilitate issue resolution. Responsibilities Quality Assurance Inspections Documentation & Reporting Contract Compliance Technical Support & Issue Resolution Safety & Environmental Compliance Coordination & Communication Qualifications and Experience Education: Bachelor's degree in Civil Engineering, Construction Management, or a related field preferred. Equivalent experience in lieu of education will be considered. Experience: Minimum of 10 years of experience in construction inspection or quality assurance for federal, state, or commercial projects. Previous experience with USACE projects is highly desirable. Certifications (Preferred but not required): Construction Quality Management for Contractors (CQM-C) OSHA 30-Hour Certification Technical Skills: Proficient in reading and interpreting construction drawings, plans, and specifications. Knowledge of construction materials testing and inspection methods. Familiarity with quality management software and tools. Interpersonal Skills: Strong communication skills, both written and verbal. Ability to work independently and as part of a multidisciplinary team. Problem-solving aptitude and attention to detail. Physical & Work Environment Requirements Ability to work in various weather conditions and environments, including remote project sites. Security Clearance Must be able to obtain and maintain a security clearance if required by the project. Crawford Consulting Services, an equal opportunity employer, is a woman-owned small business that provides full-service construction consulting services for commercial, federal government agencies, and private sector organizations on a worldwide basis. We build dynamic teams dedicated to excellence and the pursuit of success. At Crawford, we offer a competitive benefits package including health, dental, and vision insurance, flexible spending plan, life insurance, short/long-term disability, and 401K savings plan with company match. Requirements:

Job Description BASIC FUNCTIONS Entry level position. Performs basic counterfeit lab testing and visual inspection of various commodities including, but not limited to, electromechanical and electrical devices, electronic components, aircraft parts and hardware. This individual has the responsibility and authority to carry out assigned tasks. SPECIFIC DUTIES Visual and dimensional inspection of all product, including corresponding documentation received into CTG facility Ability to complete a full analysis on all EEE Devices within the Laboratory Ability to learn and subsequently operate all test equipment within the Laboratory Department Prepare and complete all necessary documentation (records) for reporting acceptance/rejection of items inspected and/or tested. Identify nonconformity to provide data to Quality Manager. Ability to communicate, document and report all nonconformity within internal system and direct supervisor. Ability to conduct work as assigned by senior management. Ensure daily tasks and priority inspections are completed ensuring all stock sales are completed for the day. Ability to understand industry traceability and documentation requirement as required for each industry Ability to evaluate and differentiate between various commodity types. Review and implement detailed inspection reports to provide all information regarding product testing and inspection Ability to use general inspection gages, Ex. Calipers, Micrometers, etc. Ability to understand and decipher basic blueprint, data sheet, technical sheet requirements. Must possess the ability to verify products fit, form and function by utilizing the appropriate gages to identify conformity. Ensure First Article Inspection requirements are done in accordance with AS9102 and customer requirements. For source conducted first article inspection, utilized tools, equipment as appropriate to conduct GD&T for inspection reports. Complete AS9102 or equivalent or customer source designated reports for all First Articles and Source Inspections. STANDARD REQUIREMENTS Comply with all requirements of International Standard ISO9001 and ISO27001, NIST 800-171, CMMC - Cyber Security and Informational Data Security Requirements. Aerospace Management System Standards AS9100, AS9120, IDEA-QMS-9090, ASA-100 and supporting construct standards AS6081, IDEA-STD-1010, AC7402-CAAP, CCAP-101, FAA AC00-56, ANSI/ESD S20.20. All employees shall commit and comply with the requirements of AS5553 for Counterfeit Electrical, Electronic and Electromechanical (EEE) Parts - Avoidance, Detection, Mitigation and Disposition practices. METRICS AND MEASURABLES Daily throughput (inspections/Lab steps completed) Quality Issue detections (Incoming NCM ) Outgoing Quality (customer Escapes) IDEA Certification and knowledge implementation Use of GD&T and FAI knowledge for timely FAIR completion Issue communication Daily 6S/ESD/FOD policies followed Ability to find datasheets/drawings information on CTG Systems Diversity of inspections (EC/EM/HA/Hardware/etc) Achieving CQI certification EDUCATION / EXPERIENCE / COMPENTENCY High School Diploma or equivalent 1 year of manufacturing or quality experience is a plus but not required Must be proficient in English, both written and verbal communication skills Good arithmetic skills are required Mechanical aptitude desired Working knowledge of measurement instruments: i.e., calipers, etc. Basic proficiency of Microsoft Excel and Word Must complete IDEA-ICE-3000 Certification within 6 months of hire. Able to pass internal testing and training to meet internal requirements Must demonstrate acceptable vision requirement.

At Coco, we're revolutionizing last-mile delivery with autonomous robots, making deliveries faster, more efficient, and more sustainable. We're looking for a proactive and tech-savvy Office Manager to oversee our facility operations, ensuring our teams have the resources and environments needed to thrive. About the Role As a Fleet Quality Technician, you'll be the backbone of our robot operations, assembling, maintaining, and deploying delivery robots with precision while leading efforts to diagnose and resolve hardware, electrical, and IoT issues. You'll design repeatable solutions that scale, perform hands-on repairs and testing, and provide critical feedback that drives future hardware improvements. This role is fast-paced, technical, and highly dynamic-perfect for someone who thrives on problem-solving, takes pride in getting things right the first time. What You'll Do Serve as the technical lead during robot deployments, identifying and resolving mechanical, electrical, and software integration issues in real time Own the root-cause analysis and resolution process for fleet quality issues that impact launch success or fleet uptime Design and implement scalable SOPs, tools, and diagnostics for frontline teams to reduce downtime and improve serviceability Collaborate with Engineering, Supply Chain, and Field Operations to close the loop between product issues and fixes Provide structured feedback to Product & Engineering teams and help pilot new hardware, software, or process changes in the field Build lightweight dashboards, diagnostic logs, and technical documentation that can be adopted across teams About You 4-6+ years in hardware operations, fleet maintenance, or field engineering with a focus on mechanical and electrical systems Deep experience troubleshooting mechanical, electrical, and IoT (connectivity/sensor/data) issues Strong systems thinking mindset-you see the big picture and design processes to solve root causes, not just symptoms Independent, self-motivated, and solution-oriented-you don't wait to be told what's broken Excellent communicator with the ability to work fluidly across technical and non-technical stakeholders Familiarity with SQL, JIRA, inventory systems (e.g., Oracle ERP), and basic data analysis to spot trends and validate fixes Comfortable in fast-moving environments and field-based problem-solving scenarios Bonus Points Prior experience in robotics, micromobility, autonomous delivery, or connected fleet operations History of developing technical SOPs, diagnostic workflows, or cross-team enablement tools Experience working closely with Engineering and Product teams to iterate on hardware or firmware in production environments

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Starting Rate: $21.21 GENERAL PURPOSE: Inspect, at various stages of production, printed material/cartons to ensure they meet both the customer's and MPS's quality and production standards. Essential Job Functions * Records and maintains accurate in-process inspection records. * Inspects in-process material using statistical sampling plans. * Performs various testing methods including scanner challenge and scale count verification. * Visually inspects for printing, die cutting and gluing to established standards. * Inspects each pallet prior to shipping (accepting or putting on Q.C. Hold). * Ensures material placed on Q.C. Hold is properly documented and moved to the Hold Area. * Communicates with packers/feeders and mechanics to correct/sort, when defects are found during a production run. * Checks job bag for all standards and specifications required for that operation before beginning production. * Conducts line clearance and documents before starting production. * Establishes case counts for all new jobs and monitor to insure existing counts are correct. * Performs other job duties as assigned. Qualifications * Must have good communication skills and the ability to give directions when required. * Must have knowledge of GMPs and SOPs for Quality. * Must understand basic math and be able to use a calculator. * Must be able to read and write in English. * Must pass basic reading test. * Must pass ruler test. * Must pass color hue test. * Must be able to differentiate between acceptable and unacceptable material. * Must be able to maintain good attendance. * Must be willing to work overtime as needed; significant overtime may be required during busy periods. * Must be able to perform all essential functions of this job with or without reasonable accommodation. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Employee is required to: sit, stand, talk, see, and hear. The starting rate is $21.21 per hour, depending on your role, level, and location. The benefits for this role may include short-term bonus incentive, health, dental and vision insurance, flexible spending accounts or health savings accounts, retirement savings plans, life and disability insurance programs, and paid sick leave as required by applicable state/local law, 10 days of paid vacation, and 11 days of paid holidays, subject to annual change. Your actual pay will be based on your work location and other factors, such as your skills, experience, and education. To learn more about the specific salary range for your preferred location, please contact your recruiter during the hiring process. You may apply online at ******************************** and the application window is expected to close by 11/9/2025. Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Benefits: 401(k) Dental insurance Health insurance Paid time off Seeking a Coffee Equipment Technician who wants to achieve excellence in themselves and be a member of a winning team. Handy person willing to learn and grow their skills in diagnostics, repairs and maintenance of commercial coffee/tea brewers, espresso machines, and coffee related foodservice equipment. Experience is greatly valued. Field work in the NY Metro area and Jersey City shop. Self-starter, with strong organizational skills. Ability to work with team members assisting customers to resolve coffee and equipment issues. Responsibilities: Troubleshoot, repair, install, adjust coffee and espresso brewing equipment Train customers in basic operations and maintenance from the user perspective Perform routine preventative maintenance as well as full refurbishment in shop and field Respond to work order requests in a timely fashion Work with team members and customers to resolve technical problems Ensure coffee quality standards at the point of sale Adhere to all company safety policies and procedures Job description is not intended to cover every single requirement of the job. The company reserves the right to change job duties at any time. Qualifications: Mechanical and electrical skills needed to repair and maintain equipment Desire to perform to the highest standards of excellence Diplomacy and communication skills needed to provide quality customer experience Ability to handle physical workload and lifting heavy equipment in excess of 50 lbs. Must have valid clean Drivers license Fluent in English both in speaking and writing . Salary Range: 50-70K, based upon experience Company Description: Kobrick Coffee Co. Inc. is a 105 year old Specialty Coffee Roaster based in the NYC area since 1920. Clients include Coffee Shops and Cafes, Restaurants, Hotels, and other food service venues who desire high quality coffee and top-level service and support from their coffee partner/roaster.

Job Description Alacrity Solutions Independent Contractor Automotive Mechanical Inspector Alacrity Solutions is a full end-to-end provider delivering streamlined insurance claims, repair, and recovery solutions. As one of the largest independent providers of insurance claims services in North America, we provide property, auto, heavy equipment, and casualty claims management services. Our staffing capabilities, temporary housing services, managed repair network, and subrogation services support a fully integrated solution for all your needs from first notice of loss through completion of repairs. By assembling the best service providers through strategic acquisitions and relying on the right talent, Alacrity Solutions provides consistent, professional, and scalable services throughout the entire claim handling and resolution process. To learn more, visit ************************** The objective of the Automotive Mechanical Inspector is to travel to repair facilities in your area to verify mechanical failures. Skills & Requirements/Licensure: Candidate must have a minimum of 5 years hands on automotive repair experience, ASE or equivalent Manufacturer Certifications. Ability to take high quality photos and video, valid driver's license and some basic tools required. Computer and Phone System Requirements: Smartphone with ability to receive text messages and monitor email. Computer with internet access. Experience with web-based applications a plus. Working Conditions / Physical & Mental Demands: The physical demands described here are representative and must be met by the independent contractor to successfully perform this job. 100% travel is required within designated working territory based on the location of assignments received. Normal office or field claims environment. Ability to operate a motor vehicle for up to 8 hours daily, repeatedly entering and exiting the vehicle. Must be able to make physical inspections of auto loss sites. Must be able to work outdoors in all types of weather. Why Choose Alacrity? Flexibility: Self-determined Scheduling Competitive payment rates. Weekly pay. Knowledgeable office staff working to assure our inspectors are fully trained and supported from initial onboarding to being a long-term inspector. Come join us to turn your knowledge into a career without turning a wrench ever again! Diversity Statement Alacrity is an equal opportunity employer and is committed to providing employees with a work environment free of discrimination and harassment. All decisions pertaining to an employee's employment are made without regard to race, color, religion, sex (including sexual orientation, pregnancy, childbirth), gender, gender identity or expression, age, national origin, ancestry, physical or mental disability, medical condition, reproductive health decisions, veteran's status, genetic information, creed, marital status, disability, citizenship status, or any other characteristic protected by applicable law. How Long We Retain Personal Information: We will keep your personal information for as long as necessary to fulfill legitimate business purposes and in accordance with applicable laws. Powered by JazzHR h9k7P8llCH

As a QC Technician, you will be a key player in ensuring product quality and safety throughout the production process of bread. Your role will encompass line auditing, environmental monitoring, air sampling, and participating in a monthly SQF audit. You will also be responsible for the calibration and verification of scales, monitors, and other basic instrumentation. Responsibilities * Conduct line auditing for bread production. * Perform environmental monitoring and air sampling. * Participate in monthly SQF audits. * Calibrate and verify scales, monitors, and other instrumentation. * Utilize MS Excel, Word, and Office for documentation. * Monitor and verify product quality following GMP. * Perform visual inspections and quality checks on product weights, codes, and labeling. * Address food safety issues and customer complaints with QA Supervisors. * Complete other periodic tasks as required. Essential Skills * Quality Control experience in the Food and Beverage industry. * High School Diploma. * Knowledge of Food Safety practices including SQF, FSMA, or HACCP. * Proficiency in Microsoft Word, PowerPoint, and Excel. * Ability to communicate effectively and work in a team. * Adaptability to change in a fast-paced production environment. Additional Skills & Qualifications * Bilingual proficiency is advantageous. * Experience in a GMP environment. * Familiarity with Environmental Monitoring, HACCP, SQF, Production, and Air Sampling. * HACCP or SQF Certification is a plus. * Passion for the food industry and a desire to grow in this field. Work Environment Join a thriving company known for its growth and expertise in the food industry. You will work in a dynamic Pastry Production facility, learning from leaders with over 20 years of experience in training technicians. The company imports and exports with European countries and distributes 300-500 additional items beyond their in-house manufacturing. This role offers an exceptional opportunity to expand your skills and contribute to a growing enterprise. Pay and Benefits The pay range for this position is $25.00 - $27.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: * Medical, dental & vision * Critical Illness, Accident, and Hospital * 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available * Life Insurance (Voluntary Life & AD&D for the employee and dependents) * Short and long-term disability * Health Spending Account (HSA) * Transportation benefits * Employee Assistance Program * Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Paterson,NJ. Application Deadline This position is anticipated to close on May 13, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

QUALITY CONTROL - WALDWICK NEW JERSEY START NOW !!!!!!!!!!!!!!!!!! ** We are looking for reliable and responsible candidate for warehouse associate in Waldwick. Pay rate: $13.50 (NEGOTIABLE DEPENDING ON EXPERIENCE) 2nd shift QA( Quality Assurance) Train for 2 weeks on 1st shift MONDAY - FRIDAY ( 7am-3:30pm) Regular hours MONDAY - FRIDAY 3pm-11:30pm OVERTIME AVAILABLE Must work weekends.( rotate) Requirements: Computer Knowledge, Inspecting Materials, Test Samples Able to stand all day performing this job. Bilingual is a plus Must have transportation Benefits offered - Health Care Sick Pay 401 k offered in 2021 MUST HAVE TRANSPORTATION!!!!!!!!!!!!!!!! Start now! Vaccinated

Join Mercury and become part of our world-class Quality team that supports the American warfighter on the battlefield, saving lives and defending democracy worldwide. As a quality inspector, you will ensure that our products deliver flawlessly every time, in the heat of battle giving our troops the winning edge when it matters most. You will be utilizing the requirements of IPC Industry Standards to ensure that the quality of our products meets the high demand of our end users. You will ensure optimal product quality by performing in-process visual verification of electronic assemblies, providing real-time feedback to operators, and documenting discrepancies accordingly. Job Responsibilities: * Supporting Incoming, in-process and final inspection including customer source inspections * Obtaining and upholding IPC credentials required of the position. * Ensuring quality at a production line level by incorporating spot-inspection, sampling, and 1st-piece verification and 100% inspection as required. * Verifying compliance of in-process material against Customer and Industry Standards * Ensuring documentation is accurately recorded and collected. * Escalating systemic issues to Quality and Manufacturing Engineering * Supporting first-piece verification runs with accompanying documents. * Documenting non-conformities to the process and specifications * Initiating regular quality line-audits to ensure all documentation, consumables, and tooling are within check. * Advocating proper ESD, PPE, and FOD prevention Required Qualifications: * Typically requires 3+ years of experience in quality assurance of electro-mechanical inspection in a manufacturing environment * J-STD-001 Class 3 and/or IPC 610 certified * Physically able to spend up to 8 hours a day using a microscope * Familiarity with IPC Industry Standards * High-School Diploma Preferred Qualifications: * Experience working in an ISO-9001 and/or AS9100 Quality System environment * Operating appropriate inspection equipment; (AOI, XRAY, etc.…) * Ability to communicate openly and effectively to provide real-time feedback * Ability to work in a fast-paced team environment * Customer-Focused, "Zero-Defect" Mindset * Documentation Abilities * Computer literacy * Industry-Relevant Quality Inspection or Control experience * Willingness to cross train in multiple Quality areas This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government. Why should you join Mercury Systems? Mercury Systems is a technology company that makes the world a safer, more secure place. We push processing power to the tactical edge, making the latest commercial technologies profoundly more accessible for today's most challenging aerospace and defense missions. From silicon to system scale, Mercury enables customers to accelerate innovation and turn data into decision superiority. Headquartered in Andover, Massachusetts, Mercury employs more than 2,300 people in 24 locations worldwide. To learn more, visit mrcy.com Our Culture We are committed to making Mercury a great place to work, no matter where our employees are located. We offer a casual and enjoyable atmosphere that allows employees to learn and grow. We help and care for one another and work as one to achieve results for us and for our customers. We value communication and transparency, and strive to foster two-way dialogue at all levels of the organization. We are committed to lifelong learning, offering comprehensive skills training and tuition reimbursement. Whether you're just starting out on your career journey or you are an experienced professional, it's important to us that you feel recognized and rewarded for your contributions. To find out more about Why Mercury?, or visit the Mercury Community or find answers to general questions at Mercury FAQs Mercury Systems is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, age, sex (including pregnancy), sexual orientation, gender identity, national origin, genetic information, creed, citizenship, disability, protected veteran or marital status. As an equal opportunity employer, Mercury Systems is committed to a diverse workforce. In order to ensure reasonable accommodation for individuals protected by Section 503 of the Rehabilitation Act of 1973, the Vietnam Veterans' Readjustment Act of 1974, and Title I of the Americans with Disabilities Act of 1990, applicants that require accommodation in the job application process may contact the number below for assistance. ************** Click here read about our recent press release.

Job Description General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. Conduct in-process inspections at specified intervals to monitor quality and verify requirements. Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. Accurately record inspection results in logs, check sheets, or digital systems. Complete First Article Inspection Reports (FAIRs) as required. Communicate non-conformances promptly to machinists, supervisors, or the quality manager. Work closely with machinists, programmers, and setup personnel to validate machine setups. Provide feedback to promote continuous improvement. Ensure inspection activities comply with company standards and ISO/AS requirements. Support calibration and proper use of inspection tools. Maintain adherence to safety protocols and 5S practices. Ability to detect deviations and recommend corrective actions. Identifies potential quality risks after they become issues. Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required High school diploma or equivalent. 2+ years of experience in machining, manufacturing, or inspection environment Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) Ability to read and interpret blueprints and technical specifications Strong attention to detail and problem-solving skills Good written and verbal communication skills Experience with ISO 9001, AS9100, or similar quality management systems Familiarity with statistical process control (SPC) Knowledge of ERP/MRP systems or digital quality management tools. Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements Ability to stand, walk, or sit for extended periods. Ability to lift to 50 lbs. occasionally. Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.

General Purpose The In-Process / First-Piece Inspector is a critical member of the Quality Department responsible for ensuring that machined parts meet all customer, engineering, and industry requirements. This role focuses on inspecting first-off parts, validating setups, and performing in-process inspections to prevent defects, reduce scrap, and maintain the highest level of quality standards. Essential Duties and Responsibilities * Perform first-piece inspections on initial production runs to verify compliance with engineering drawings and specifications. * Conduct in-process inspections at specified intervals to monitor quality and verify requirements. * Use precision measuring instruments such as micrometers, calipers, bore gauges, height gauges, and CMM. * Accurately record inspection results in logs, check sheets, or digital systems. * Complete First Article Inspection Reports (FAIRs) as required. * Communicate non-conformances promptly to machinists, supervisors, or the quality manager. * Work closely with machinists, programmers, and setup personnel to validate machine setups. * Provide feedback to promote continuous improvement. * Ensure inspection activities comply with company standards and ISO/AS requirements. * Support calibration and proper use of inspection tools. * Maintain adherence to safety protocols and 5S practices. * Ability to detect deviations and recommend corrective actions. * Identifies potential quality risks before they become issues. * Takes responsibility for the accuracy and timeliness of inspections. Supervisory Responsibilities None Education/Experience Required * High school diploma or equivalent. * 2+ years of experience in machining, manufacturing, or inspection environment * Strong knowledge of GD&T (Geometric Dimensioning & Tolerancing) * Proficiency with precision inspection tools (micrometers, calipers, comparators, CMM) * Ability to read and interpret blueprints and technical specifications * Strong attention to detail and problem-solving skills * Good written and verbal communication skills * Experience with ISO 9001, AS9100, or similar quality management systems * Familiarity with statistical process control (SPC) * Knowledge of ERP/MRP systems or digital quality management tools. * Prior experience completing FAIRs or PPAPs. Computer Skills Necessary Microsoft Office Physical Demands/Requirements * Ability to stand, walk, or sit for extended periods. * Ability to lift to 50 lbs. occasionally. * Sufficient vision to detect part flaws and read instruments. Work Environment The warehouse environment may include exposure to varying temperatures, dust, noise, and potential hazards such as moving machinery.