Quality inspector jobs in New Bedford, MA

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: * Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. * Judge as "fit for release" production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. * Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. * Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. * Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. * Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. * Document inspection results. Required Experience: * 1-3 years of production/manufacturing/quality control experience preferred but not required. * High school diploma or equivalent, Associate's or Bachelor's degree a plus * Some background in physical sciences and algebra * Ability to accurately read and enter computer data through a variety of tests * Proficiency in Excel, Word, and other MS Office applications * Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Job Description Busek Co. Inc. (************** research, develops, and produces spacecraft subsystem technologies for space missions. Our talented staff possess expertise in in-space propulsion, space-borne sensors, materials science, manufacturing, and high-fidelity electronic design for challenging space missions. Busek is recognized in the spacecraft on-orbit propulsion community for numerous achievements, including developing the first U.S. Hall Effect Thruster in space. Our efforts span research, development, and manufacturing of aerospace systems, with low-volume production of high-reliability in-space components and subsystems. Our facilities include over 30,000 sq. ft. of R&D labs and more than 40 vacuum chambers. Founded in 1985, Busek is located in Natick, MA, approximately 20 miles west of Boston. For more information, visit ************** Summary: As a Quality Assurance (QA) Inspector - Receiving, you will play a critical role in ensuring the quality of incoming and in-process parts and components. You will work closely with design and test engineers, manufacturing staff, and fabrication technicians (both internal and external) to verify compliance with Busek's documentation and customer requirements. This role provides a direct contribution to spaceflight programs, including groundbreaking NASA, commercial space, and defense missions. How you will make an impact: Conduct inspections of incoming and in-process components per documentation requirements. Interpret engineering blueprints, specifications, and drawings. Operate and utilize various inspection tools and gauges to verify part quality. Maintain accurate inspection records and documentation. Adhere to GD&T (Geometric Dimensioning and Tolerancing) principles and processes. Coordinate inspection efforts with coworkers to ensure workflow efficiency and quality compliance. Desired Skills: Prior experience in a technical QA parts inspection role. Previous work experience in quality control or related field. Proficiency in Microsoft Office Suite (Word, Excel). Knowledge of AS9100 or ISO 9001 standards is a plus. Experience working with small precision components. The expected salary range for this position is $52,000 - $79,000. Actual compensation will be determined by the candidate's experience, education, and alignment with organizational needs. Additional Information: To conform to U.S. Government regulations, applicants must be a U.S. citizen, lawful permanent resident of the U.S., or a protected individual as defined by 8 U.S.C. 1324b(a)(3). Benefits: Competitive Salary SEP Retirement Savings Performance Bonuses Medical, Dental, and Vision Insurance Life Insurance Long-Term / Short-Term Disability Coverage Paid Vacation, Sick Leave, and Holidays Education Assistance To comply with U.S. Government space technology export regulations, including the International Traffic in Arms Regulations (ITAR), employment at Busek requires that applicants be one of the following: A U.S. citizen A lawful U.S. permanent resident (i.e., current Green Card holder) A refugee or an individual granted asylum in the U.S. Or be eligible to receive the required authorizations from the U.S. Department of State and/or the U.S. Department of Commerce, as applicable For more information about ITAR regulations, visit this resource. Article - DDTC Public Portal Powered by JazzHR 7u9ZsAqfCq

The Panther Group is looking to hire a Quality Inspector to support production at a leading manufacturer's Franklin, MA facility. The selected candidate will be responsible for the following duties: Self-starter able to work independently Responsible for supporting incoming, in-process, and final inspections - focus on machined and assembled mechanical components Verify product conformance to program specifications, drawings and acceptance tests Capture all inspection data and supplier data packages in ETQ and Deltek Knowledge of test and inspection methodology Able to properly utilize standard inspection tools; calipers, micrometers, height stands, etc Support of QMS, AS9100D and CMMI processes Supports assigned programs in accordance with detailed Quality Plans Assure inspection equipment used is calibrated Assist with cable & circuit board inspection as needed Required Qualifications: Minimum 3 Years experience Experience working on DOD electromechanical products Must be proficient in Microsoft Office applications Possess good technical communications and team building skills Must be able to interface with engineering, manufacturing, program office and configuration management Ability to problem solve and critically think Good trigonometry/geometry math skills Experience with Geometric Dimensioning and Tolerancing (GD&T) IAW ANSI/ASME Y14.5 Preferred Qualifications: Certified to or knowledgeable of IPC-A-610/620 requirements Recent experience working in an AS9100 environment Recent experience operating a CMM Pay Rate: Up to $35.00 per hour DOE #INDENG

Job DescriptionQuality Inspector: $28/hr - 1st Shift We are seeking a meticulous Quality Inspector with expertise in welding and press brake operations to join our job shop team. This is a challenging and rewarding position where you will play a crucial role in ensuring product quality and contributing to continuous improvement initiatives. Compensation and Benefits Pay Rate: The expected hourly wage is $28/hr. Pay will be offered based on several factors, including the candidate's education, work experience, work location, specific job duties, and certifications. Benefits: We offer comprehensive benefits, which include health insurance and an incentive recognition bonus. (All benefits are based on eligibility). Responsibilities Include: Conduct visual and dimensional inspections of welded components and press brake-formed parts to ensure compliance with engineering drawings, specifications, and quality standards. Document inspection results, deviations, and non-conformances accurately and in a timely manner using inspection reports and quality control records. Maintain comprehensive records of inspections and provide feedback to the production team for continuous improvement. Monitor and evaluate welding processes, including MIG, TIG, and spot welding, for compliance with established procedures and standards. Monitor press brake operations to ensure proper setup and adherence to bending angles and tolerances. Identify and address any issues related to equipment performance or process deviations. Verify the quality of raw materials and welding consumables, ensuring they meet required specifications and standards. Assess the suitability of materials for the intended applications, reporting any issues to the appropriate personnel. Investigate and analyze the root causes of non-conformities and defects, working closely with the production team to implement corrective and preventive actions. Provide guidance and training to production personnel on quality standards, best practices, and quality control procedures. Actively participate in continuous improvement initiatives and collaborate with engineering/production to implement quality enhancements and optimize processes. Ensure that all quality inspections are performed safely and in compliance with company safety protocols. Skills and Qualifications ️ Proven experience as a Quality Assurance Inspector in a job shop environment with welding and press brake operations. Must have Job Shop experience. Strong knowledge of welding processes, including MIG, TIG, and spot welding, as well as press brake forming. Proficiency in reading engineering drawings and blueprints is a must. Excellent attention to detail and strong analytical skills. Strong problem-solving and root cause analysis skills. Knowledge of quality control tools and techniques. Experience using calipers and micrometers is a plus. Ready to Apply? Are you ready to make a difference as a meticulous Quality Assurance Inspector? Join our team and take the first step toward a rewarding future. Apply today! We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Job DescriptionSalary: PURPOSE: Inspects materials to ensure they comply with defined requirements. RESPONSIBILITIES: Ensure that materials entering operations department meet design and customer requirements by inspecting and confirming dimensions, visual/cosmetic attributes, functional requirements, and supporting documentation Compare measurements against established requirements, determine pass/fail, and document any non-conforming material Conduct Coordinate Measuring Machine (CMM) part setup and operation utilizing fixturing and probe calibration Develop inspection methods and set-ups Develop and use Inspection Sampling Plans with assistance of the QA Manager and QA Engineering Originate and maintain all inspection records Originate Nonconformance Reports in the internal system Support MRB (Material Review Board) activities Perform Liquid Penetrant Inspection to verify weld quality and workmanship Perform mechanical calibration of inspection and measurement tools and administers calibration system EDUCATION AND EXPERIENCE: High School Diploma required Associate Degree in related field or certificate from technical school highly preferred. ASQ Certified Inspector preferred 2 years-experience inspecting product in an ISO 9001 manufacturing environment CMM programming software knowledge KNOWLEDGE AND SKILLS: Proficient in the use of inspection and measurement hand tools (calipers, micrometers, height gauge, etc.) Ability to read and decipher blueprint layouts & GD&T Ability to read electrical/mechanical diagrams, spec sheets, and outline drawings Good communication skills, verbal and written Strong organizational skills and the ability to successfully complete multiple tasks within established and changing deadlines WORKING CONDITIONS: Standing 95% Lifting up to 50 lbs. We offer full benefits and competitive compensation. Hourly range: $22.53 - $30.48 depending on experience Benefits: 401(k) with generous match Dental insurance Employee discount Flexible spending account Health insurance Life insurance Paid time off Parental leave Tuition reimbursement Vision insurance Equal Opportunity Employer - Minorities/Women/Veterans/Disabled *This organization participates in E-Verify.*

Headquartered in Atlanta, Georgia and founded in 1993, Precision Aviation Group (PAG) is a leading provider of maintenance, repair, and overhaul (MRO) and value-added supply chain services to the aerospace and defense industries. With 25 FAA-approved repair stations, 27 locations worldwide, 1,100+ employees, and over 1.2 million square feet of production/distribution facilities, PAG offers comprehensive MRO services on over 200,000 product lines. PAG supports operators in the Airline, Business and General Aviation (BGA), Military and Rotary Wing markets through its Inventory Supported Maintenance, Repair, and Overhaul (ISMRO ) business model. JOB PURPOSE We are seeking motivated candidates for this position which involves receiving, inspecting components for repair and overhaul, generating pre-established technical documentation and shop travelers. Data entry experience is a plus! but not required. JOB DUTIES AND RESPONSIBILITIES Essential Job Functions: • Receiving incoming Components for Repair / Overhaul • Generating documentation, technical data and shop travelers using customer repair orders as guidance. • Perform Visual and Dimensional Inspections using manual inspection tools to determine serviceability • Perform Floor Inspections on various machines / ensuring tolerances are met • Maintain FAA Documentation / Record keeping • Prepare Customer Repair / Overhaul Quotes • Perform Final Inspections / Generate FAA / DOT Documentation • Assist in Maintaining FAA/DOT Quality System WORKING CONDITIONS Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. This position may require walking primarily on a level surface for periods of time as well as reaching above shoulder heights or below the waist or lifting as required to file documents or store materials throughout the workday Equipment Operated: Ability to operate office machines and equipment and troubleshoot problems with equipment. Work Location: Aviation Welding Technologies, LLC 73 Commerce Drive, Uxbridge, MA Protective Equipment Required: None Potential Hazards: Exposure to materials identified on Material Safety Data Sheets. JOB SPECIFICATIONS Knowledge, Skills and Abilities: Must have a minimum of 5 years' experience. • Must be Highly Motivated individual • Must possess Excellent Organizational and Communication Skills • Must have Data Entry Skills / computer literate • Must be able to read, write and understand English • Must be available to work Fulltime, M-F, Hours ranging from 7am- 5pm • Must pass FAA/DOT Pre-Employment drug test and background screen, also will be subjected to random drug and alcohol testing. Education/Training: Minimum of a H. S. Diploma or GED. Experience: Minimum of 3 years' experience. Certificates/Licenses: None We offer competitive pay and a wide variety of benefits. Full time associates qualify for health benefits the first of the month following 30 days' employment. Options include 4 medical plans, 2 dental plans, vision, base life (company paid), voluntary life, short and long-term disability, flex spending accounts, and telemedicine. Other benefits include vacation and PTO time accrued with each pay cycle with a vacation carryover/payout option at year end, 9 paid holidays, 401k with company match contributions. Qualified candidates with strong drive, work ethic and commitment to quality are invited to apply at www.precisionaviationgroup.com using the Careers tab. EOE/Vets/Disabled

Acute Care Technology At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary In-Process and Final Inspection of all medical device products manufactured and distributed by ZOLL Medical Pawtucket to ensure conformance to specifications. Essential Functions Performs in-process and final inspection of all product lines and areas for conformance to specifications (inspection procedures and engineering drawings), conducting visual inspection and testing components/assemblies in production. Verify Calibration status of critical equipment and instrumentation. Maintains and records quality testing information as part of a DHR (Device History Record). Initiates DMR's (Discrepant Material Report) for nonconforming material. Understands and ensures compliance to procedures. Populate required inspection metric information. Prepare retain samples for storage. Completes all tasks within established guidelines. Understands and apply principles of GMP. Maintains work areas and equipment in a clean and orderly condition and follows prescribed safety regulations. Must be able to work in a Team environment, multi-task and communicate effectively. Required/Preferred Education and Experience High School Diploma or equivalent required 1 - 2 years' experience in related position, or a sufficient combination of the two. required Knowledge, Skills and Abilities Proficient in the English language (speak, read and write). Proficient in the use of basic Dimensional Measuring Tools. Proficient in basic computer skills. Ability to perform basic math calculations (addition, subtraction, multiplication and division). Ability to read specifications, procedures, and engineering drawings, basic blueprint reading. Strong attention to detail ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $22.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

Acute Care Technology At ZOLL, we're passionate about improving patient outcomes and helping save lives. We provide innovative technologies that make a meaningful difference in people's lives. Our medical devices, software and related services are used worldwide to diagnose and treat patients suffering from serious cardiopulmonary and respiratory conditions. The Acute Care Technology division of ZOLL Medical Corporation develops and delivers innovative lifesaving products and software solutions to EMS, hospital, public safety, and military customers globally. Our dedicated employees take pride in their commitment to improving patient outcomes while delivering world-class customer service. At ZOLL, you won't just have a job. You'll have a career-and a purpose. Join our team. It's a great time to be a part of ZOLL! Job Summary In-Process and Final Inspection of all medical device products manufactured and distributed by ZOLL Medical Pawtucket to ensure conformance to specifications. Essential Functions * Performs in-process and final inspection of all product lines and areas for conformance to specifications (inspection procedures and engineering drawings), conducting visual inspection and testing components/assemblies in production. * Verify Calibration status of critical equipment and instrumentation. * Maintains and records quality testing information as part of a DHR (Device History Record). * Initiates DMR's (Discrepant Material Report) for nonconforming material. * Understands and ensures compliance to procedures. * Populate required inspection metric information. * Prepare retain samples for storage. * Completes all tasks within established guidelines. Understands and apply principles of GMP. * Maintains work areas and equipment in a clean and orderly condition and follows prescribed safety regulations. * Must be able to work in a Team environment, multi-task and communicate effectively. Required/Preferred Education and Experience * High School Diploma or equivalent required * 1 - 2 years' experience in related position, or a sufficient combination of the two. required Knowledge, Skills and Abilities * Proficient in the English language (speak, read and write). * Proficient in the use of basic Dimensional Measuring Tools. * Proficient in basic computer skills. * Ability to perform basic math calculations (addition, subtraction, multiplication and division). * Ability to read specifications, procedures, and engineering drawings, basic blueprint reading. * Strong attention to detail ZOLL is a fast-growing company that operates in more than 140 countries around the world. Our employees are inspired by a commitment to make a difference in patients' lives, and our culture values innovation, self-motivation and an entrepreneurial spirit. Join us in our efforts to improve outcomes for underserved patients suffering from critical cardiopulmonary conditions and help save more lives. The hourly pay rate for this position is: $20.00 to $22.00 Factors which may affect this rate include shift, geography, skills, education, experience, and other qualifications of the successful candidate. Details of ZOLL's comprehensive benefits plans can be found at ********************* Applications will be accepted on an ongoing basis until this position is filled. For fully remote positions, compensation will comply with all applicable federal, state, and local wage laws, including minimum wage requirements, based on the employee's primary work location. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, disability, or status as a protected veteran.

CITY OF EAST PROVIDENCE EMPLOYMENT OPPORTUNITY - PART TIME MECHANICAL INSPECTOR Division: Building and Zoning $35.00 Per Inspection / No Benefits Up to 19 Hours per week Description: Under the general supervision of the Building Official, Mechanical Inspector performs technical work inspecting mechanical installations for conformity with State regulations and City Ordinances. The Mechanical Inspector performs property inspections, and is responsible for interpretation of codes, regulations and ordinances covering existing and new installations. In carrying out the City's inspection program, the Mechanical Inspector reviews plans, approves or disapproves permit applications, conducts field inspections, makes reports, and may perform duties as the Building Inspector. The Mechanical Inspector takes individual initiative and exercises judgment and discretion within the limits of standard practices and legal requirements. General Responsibilities: Reviews plans, approves or disapproves permit applications, conducts field inspections, and makes reports related to construction projects in the City. Interprets and explains application of codes or provisions of building code to contractors and property owners. Inspects mechanical installations found in building construction for conformity with required codes, regulations, ordinances, standards, and laws. Ensures that work is being performed by personnel with appropriate licenses. Investigates complaints related to violations of mechanical codes. Issues verbal or written orders for correction of defects, workmanship and materials. Prepares reports of all inspections performed, covering conditions discovered, action taken and recommendations for future action. Performs related work as required. Desirable Abilities, Knowledge, and Skills: Ability to read and interpret plans and specifications for mechanical installations, and general building construction. Ability to successfully meet and establish satisfactory work relationships with contractors, property owners and the public. Ability to enforce regulations with firmness, tact and impartiality. Ability to prepare written reports. Thorough knowledge of laws, codes, ordinances and regulations governing mechanical installations and property standards. Through knowledge of the methods, materials and techniques of mechanical and building trades. Considerable knowledge of possible defects and faults in mechanical systems. Considerable knowledge of standard testing devices and effective corrective measures. Ability to detect and locate building mechanical violations. Knowledge of the stages of construction and installation where defects are most usually found and remedied. Knowledge of warm air heating, ventilating and air conditioning systems, steam and hot water heating systems, boiler and pressure vessel maintenance and inspection, mechanical refrigeration, gas, liquid and solid fuel piping and equipment and air pollution control equipment. Ability to draw floor plan sketches and locate exits, windows, sanitary facilities, etc. and ordinances. Ability to use productivity software like Microsoft Word and Excel and industry specific software and applications. Physical Requirements: Ability to work in active construction projects, sometimes in rugged terrain. Ability to lift and carry objects such as surveying equipment. Ability to lift up-to 40 pounds such as removal of manhole covers and catch basin grates. Ability to perform work at a computer workstation in an office setting. Minimum Qualifications: Graduation from a high school, trade school, or an equivalent 5 years' experience as a pipefitter. Possession of a current Rhode Island Pipefitter's Master I, Contractor or Journeymen license. Possession of a Rhode Island Mechanical inspection certification within 6 (six) months of employment. Examination Weight: Oral 100 % Application Process: Apply on the City of East Providence Employment website on ADP Workforce Now. Posted: September 30, 2025

A challenging and exciting career is waiting for you! General Dynamics Electric Boat has a proud history dating back to its incorporation on February 7, 1899, and the delivery of the first practical submarine to the U.S. Navy the following year. During the ensuing century, Electric Boat has been at the forefront of every innovation in submarine technology. Today, we are the nation's premier designer and builder of nuclear submarines. We deliver the advantage that protects our sailors, our families and our freedom! Benefits: Medical, Dental, Vision Prescription Coverage Health and Wellness Programs 401K Commuter/Van Services Paid Vacation and Holidays Paid Training Shift Differential for 2nd and 3rd Shift Professional Development and Advancement Opportunities Learn more at gdeb.com/careers Quality Inspectors perform inspection duties throughout the facility, which includes verifying attributes for welds, structures and components. Candidates will be trained in Quality Control systems, Electric Boat procedures applicable to the work they are performing and Quality Department Instructions. Candidates must work in a collaborative environment to meet all company and organizational goals. All successful candidates will be required to maintain a Magnetic Particle certification. Further opportunity for inspection disciplines such as Liquid Penetrant, Pre-Test, Electrical, Mechanical, etc. may be made available once proficiency has been achieved and maintained in Magnetic Particle. Above all, successful candidates must embody the Electric Boats Core Values, work safely; be responsible for themselves, their peers, the ship and crew who will operate our vessel. This position will need inspectors who perform with integrity and purpose. Our sailors and their families deserve excellence in our workmanship and first time quality. We are the last line of defense for the integrity of our product. This position is located at the Quonset Point facility in North Kingstown, RI Qualifications Required: High School Diploma or equivalent OR 2 plus years of related technical experience Must be able to obtain and maintain an MT, PT, or ET certification Must be able to attain a key department qualification/certification within the first six months after starting as a Quality Inspector Ability to interpret technical manuals, shipyard procedures, test documents, blueprints and diagrams Basic mathematical skills The successful candidate must be able to work all shifts, extended week days and weekends as required Ability to work at heights, tightly confined spaces and in extreme weather conditions Accurate documentation, record keeping and archiving along with verifying previous status of work for completion is a critical job function Possess your own basic hand tools Ability to obtain and maintain a security clearance through the Department of Defense Preferred: Inspection/quality assurance experience Mechanical and Electrical experience Pipe hanger installation experience Structural experience NACE Certified Knowledge of shipboard assemblies, installations, components and structures Metal fabrication experience Military shipbuilding experience Vocational, Technical and Community Colleges or Apprentice programs Related military/Navy experience Skills Basic note taking Adaptability to switch from one job to another as business needs dictate Ability to communicate effectively with their management team and peers Must maintain a positive attitude and proactively attend to issues and concerns Attention to detail must be held at an extremely high level Physical Qualifications Climbing, Color Vision, Crawling, Kneeling, Light Lifting, Medium Lifting, Pulling, Pushing, Reaching, Stooping, Twisting Environmental Attributes Acids or Alkalis, Cold, Dry, Dusty, Fumes, Hot, Inside, Noise, Oily, Wet We can recommend jobs specifically for you! Click here to get started.

Description: FOOD SERVICE QA TECHNICIAN Reports To: QA Manager FLSA: Non Exempt Pay: $22-$25 per hour The Quality Assurance (QA) Technician will be working with the Production department to ensure that the highest safety, quality, and productivity standards are achieved. The ideal candidate will have the ability to work as part of a team, have attention to detail and be diligent to maintain compliance with procedures. The QA Technician will lead by example and directly supervise all quality control and quality assurance tasks on the production floor. They will be responsible for ensuring that products are produced in compliance with specifications and records are maintained. The QA Technician will keep the Production Manager and the QA Manager informed of any quality concerns and changes needed to the process. They will also work closely with the Managers and Supervisors to ensure that the Production team performs in compliance with all food safety and quality requirements. Production runs from 6am-2pm M-F with occasional weekends Requirements: KEY RESPONSIBILITIES AND JOB TASKS Supervise all Critical Control Points and key process points at the Bakery (temperature checks, water activity, x-ray inspection, labeling, etc.) Ensure completion and accuracy of all daily paperwork (batch sheets, QA checklists, daily inspections, weekly calibrations, etc.) Verify equipment settings and process compliance Communicate with the Production Supervisors and Managers to make adjustments to processes based on changing environmental conditions, equipment status, etc. Test finished products to ensure compliance with specifications Help train employees on proper procedures Maintain QA Hold log Maintaining and organizing records in compliance with the applicable regulations Communicate daily with the Production Supervisors and Managers to facilitate coordination and cooperation across all three departments (i.e. Sanitation, Production and Maintenance). Monitor production floor for continuous GMP compliance Propose solutions to improve quality across all product lines and processes Participate in meetings (team meetings and one-on-one check ins) to provide and receive feedback Other duties as assigned by managers or supervisors REQUIRED SKILL, ABILITIES AND COMPETENCIES Juggling multiple responsibilities, strong reliability, meeting deadlines and sticking to schedules. Is precise and accurate and pays attention to the details to ensure high quality. Follows instructions, responds to management direction. Takes responsibility for own actions. Completes tasks on time or notifies the appropriate person with an alternative plan. Develops and fosters strong relationships with the team and delivers exceptional results. Contributes to building a positive work environment and supports everyone's efforts to succeed. Communicates clearly and effectively in writing, on phone, and in person. Ability to work independently, troubleshoot issues and use judgment to elevate issues appropriately. Effective communication skills, able to handle sensitive conversations Analyzes problems, identifies probable cause, researches and designs solutions. Is committed to finding the best answer within time constraints. Tackles opportunities to improve the quality of processes, products, and service to the team through ongoing refinements in response to continuous feedback; emphasizes the importance of quality, organization, and excellence in the organization. Has a good understanding of food safety and takes interest in continuous growth Adapts to changing work environments, including changes in priorities, resource availability, and protocols. REQUIRED EDUCATION, KNOWLEDGE AND EXPERIENCE 3+ years of food production experience, in the bakery or snack industry preferred 1+ year of experience in food QA/QC Proven success in a high SKU production environment Strong organization and analytical skills, with a problem solving and lean thinking mindset Knowledge of food safety risks, including allergen safety, CCPs, cleaning procedures, etc. and desire to learn more Attention to detail is a must Working knowledge of Excel, Word, and Google Suite (Google Doc, Sheet, Gmail, etc.) Strong and effective communication skills written & oral WORKING CONDITIONS Prolonged standing for extended periods Lifting/pushing/pulling/carrying up to 60 pounds Squatting and bending repeatedly Working with one or both hands extended overhead Production runs from 6am-2pm M-F with occasional weekends BENEFITS Benefits for full time employees include partial employer funded medical, dental, vision, employer funded life insurance, 401k with company match, paid time off, paid holidays, and commuter benefits. ABOUT US We are an inclusive food company that creates better food for our bodies, our communities and our amazing planet. Using seeds as our foundation, 88 Acres is redefining the world of free-from and plant-based foods. As a female founded/led and mission-driven company, we built our own bakery in the inner-city of Boston to fuel purposeful jobs into an area of need, ensure safety for those with food allergies and craft that made at-home goodness we all crave. At our certified top 9 allergen-free bakery, we create lines of Seed Butters, Seed + Oat and Protein Bars, and SeedNola (upcycled granola clusters that make 88 Acres a zero food waste operation). Since our launch in 2015, we've been fortunate to share our foods with some amazing partners and communities such as Whole Foods, Sprouts, Delta, Jamba, Boston Public Schools, and many more. The above statements are intended to describe the general nature and level of work being performed by people assigned to do this job. The above is not intended to be an exhaustive list of all responsibilities and duties required. 88 Acres is an equal opportunity employer. 88 Acres will not discriminate against any applicant for employment on any basis including, but not limited to: race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, military and/or veteran status, marital status, predisposing genetic characteristics and genetic information, or any other classification protected by federal, state and local laws The above statements are intended to describe the general nature and level of work being performed by people assigned to do this job. The above is not intended to be an exhaustive list of all responsibilities and duties required. *External and internal applicants, as well as position incumbents who become disabled as defined under the Americans with Disabilities Act must be able to perform the essential job functions (as listed) either unaided or with the assistance of a reasonable accommodation to be determined by management on a case by case basis. Compensation details: 22-25 Hourly Wage PIac42b895c4f3-31181-38678349

Job DescriptionDescription: About Quantic Evans: Quantic Evans is a proud member of the Quantic™ Electronics Family Quantic Electronics, an electronic component company, is a trusted partner in the military, aerospace, industrial, and commercial markets, boasting over a century of combined experience as a reliable problem solver. Being part of Quantic's portfolio has allowed Quantic Evans to continue developing cutting-edge capacitor technology alongside other world-class technology companies representing mission-critical electronics. With sites in East Providence, RI, and Sanford, ME, Quantic Evans manufactures high-energy-density capacitors for demanding, mission-critical applications. We have the most power-dense capacitor technology in the industry. We are routinely specified for defense, aerospace, and energy exploration applications where high reliability and SWaP (space, weight, and power) savings are critical design considerations. Quality Technician, East Providence, RI Reporting to the Quality Manager, the Quality Technician will be responsible for inspecting Quantic Evans-manufactured capacitors and capacitor banks. Ensures that products meet order specifications and established quality and control requirements. Maintains records of inspection progress and problems. Recommends and implements corrective measures under general supervision under the Quality Manager. Generally, requires between 5+ years of inspection experience in a manufacturing environment, as well as familiarity with good manufacturing and documentation practices under ISO 9001 and AS 9100 regulatory standards. Performs routine electrical testing of capacitors, components, instruments, and other mechanical assemblies. Monitors test activities and records test results; may be involved in setting up and maintaining test equipment. Responsible for the inspection of all stages of the manufacturing process. Ensures that processes, tools, products, and materials meet established quality standards and requirements. Expected Hours: Full-time Monday to Friday, 6:00 AM - 2:30 PM Responsibilities: Interfacing with Engineering /Production (30%) Identify tasks and prioritize them based on workload as required by production needs Communicates priorities to Jr. inspectors Communicate effectively with Engineering about issues and trends Quality Inspector (30%): Inspect products and components to ensure compliance with internal quality standards and regulations. Use common inspection tools and equipment (digital calipers, gages, micrometers) to measure product features. Record inspection results and report any non-conformities. Train Jr. inspectors according to established practices In-process Inspector (20%): Monitor production processes and perform regular quality checks. Identify and address potential quality issues during the manufacturing process. Work closely with production teams to implement quality improvements Electronic Tester (10%): Perform electrical and functional tests on capacitor assemblies and capacitor banks for capacitance, Equivalent Series Resistance (ESR), and Direct Current Leakage (DCL). Utilize testing equipment to identify and resolve issues, ensuring product functionality. Document test procedures and results. Metrology and Calibration (10%): Maintain and calibrate precision measuring instruments. Perform routine checks to ensure measurement accuracy and precision. Document calibration and maintenance activities. Additional duties as required Requirements: Criteria For Success Must be considered a U.S. Person eligible to work in the United States High school diploma, trade school, and/or associate degree in a related or technical field. Typically requires 3 to 5 years of inspection experience in a manufacturing environment. General knowledge of inspection processes and procedures. Familiarity with using a microscope and other quality tools like micrometers and calipers.? General time management, communications, decision-making, and organization skills. Ability to use PCs and various software applications such as Microsoft Windows and the Office suite (Excel, Word) Possess a collaborative team-oriented mindset and personality with a hands-on can-do attitude. General knowledge of manufacturing procedures preferred. Ability to keep workspace clean and adhere to all safety rules and company policies. Capability to work in a fast-paced environment to meet deadlines and quotas Must demonstrate consistent and reliable attendance. Work Environment and Physical Demands: General office and manufacturing environment. Exposure to hazards associated with manufacturing equipment and tools. This position requires working near electrical and mechanical equipment that could potentially interfere with pacemaker function. Ability to read and write in English Ability to lift, push, and pull up to 30 pounds Prolonged sitting during a shift Sitting, bending, stooping, pushing, and pulling motions Ability to handle small tools, parts, and machinery with precision. Visual acuity for reading measurements, assembly instructions, and monitoring equipment. Will be required to wear appropriate PPE as outlined by company safety protocols. EEO/AA Quantic is an affirmative action/equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, work-related mental or physical disability, veteran status, sexual orientation, gender identity, or genetic information. We participate in E-Verify. EEO Poster in English EEO Poster in Spanish U.S. EXPORT CONTROLS As a U.S. defense manufacturer, Quantic Evans is required to safeguard U.S. defense-related and other export-controlled articles, technologies, and services from unauthorized access, export, or re-export. The transfer of U.S. export-controlled articles, technologies, or services (including manufacturing processes) to individuals or entities that do not qualify as “U.S. persons,” as defined by 22 CFR 120.62, is prohibited without prior authorization from the appropriate U.S. government agencies, such as the Department of State's Directorate of Defense Trade Controls (DDTC). Under 22 CFR 120.62, a “U.S. person” is defined as a lawful permanent resident as per 8 U.S.C. 1101(a)(20), or a protected individual under 8 U.S.C. 1324b(a)(3). It also includes any corporation, business association, partnership, society, trust, or other entity that is incorporated to do business in the United States, as well as governmental entities at the federal, state, or local levels. It does not include foreign persons as defined in § 120.63. To ensure compliance with U.S. export control regulations, candidates for this position are required to undergo an Export Compliance Assessment. As part of this process, candidates may be asked to provide documentation verifying their status as “U.S. persons” or “foreign persons,” in accordance with U.S. regulation, to determine whether prior authorization is required to perform specific job duties related to this position

Job Description The Quality Control Technician - Troubleshooting is responsible for inspecting and testing cable and wire products and processes to ensure they meet all quality standards, specifications, and regulations. This includes performing visual inspections, dimensional measurements, electrical, and functional tests. The primary function of this role is to evaluate nonconforming products and to determine the necessary actions to rework the product. The QC Technician must also be able to read and interpret blueprints, engineering drawings, and specifications. This position requires the use of High Voltage, all safety guidelines, procedures, and regulations to prevent accidents and ensure a safe working environment must be followed. The Quality Control Technician - Troubleshooting is a respectful team-player that works well with diverse internal team members. This position is ambitious, self-motivated, results-driven, and demonstrates problem solving skills with sound judgment. This role is also responsive, flexible, accessible, detail oriented, willing to embrace change and proactively adjust plans. Partnering with and elevating others by communicating with peers to increase awareness and ensure team success. Essential Duties and Responsibilities: Troubleshoot nonconforming cables, fill out nonconformance reports and communicates findings to Production Quality Supervisor and Quality Manager Detect and report unusual or non-conforming documentation, materials, conditions, or product to Production Quality Supervisor and Quality Manager. Assist and sometimes lead Root Cause and Corrective Action efforts. Inspect materials, components, and final product to ensure they meet quality standards. Measure dimensions of cable and wire products to ensure they meet specifications. Conduct visual and electrical tests on cable and wire products to ensure they meet performance requirements and identify any defects. When required, perform functional tests on cable and wire products to ensure they operate as designed. Document the results of all tests and inspections. Create, update, compile, save and maintain documentation into internal database. Work with various internal personnel and departments to communicate and resolve quality issues. Comply and support company policies and quality management system. Maintain and create a clean, uncluttered environment that reduces waste and optimizes productivity by following the 5S steps: sort, set in order, shine, standardize, and sustain. When required, help with continuous improvement efforts. More additional responsibilities may be applicable per the Quality Manager. Qualifications: High school diploma or equivalent. 1+ year of experience in quality control, preferably in the cable and wire manufacturing industry. Experience with visual inspection and dimensional measurement. Basic understanding of Microsoft Office and Adobe. Ability to read and interpret blueprints, engineering drawings, and specifications. Strong attention to detail. Ability to work independently and as part of a team. Strong communication skills. Proficient with computers and comfortable using Microsoft Office Suite (Word, Excel, etc.). Physical Qualifications: The physical demands described are representative of those that must be met by an employee to successfully perform the essential function of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee is regularly required to sit; stand; crouch; stoop; walk; talk; hear; use hands to handle or feel assemblies; reach with hands and arms for materials and tools. The employee must occasionally lift and/or move up to twenty-five (25) pounds. They must also have the ability to see details at close range (within a few feet of the observer), color vision, depth perception and ability to focus. This position requires use of information or access to hardware and documents which are subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. Benefit Conditions: Waiting period may apply Only full-time employees are eligible This Job Is: A job for which military experienced candidates are encouraged to apply Job Type: Full-time Salary: $20.00 - $25.00 per hour Benefits: 401(k) Dental insurance Health insurance Paid time off Vision insurance Experience level: 1 year Schedule: 8 hour shift Day shift Monday to Friday Overtime Work setting: In-person Experience: Blueprint reading: 1 year (Required) Quality control: 2 years (Preferred) Work Location: In person

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. Judge as “fit for release” production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. Document inspection results. Required Experience: 1-3 years of production/manufacturing/quality control experience preferred but not required. High school diploma or equivalent, Associate's or Bachelor's degree a plus Some background in physical sciences and algebra Ability to accurately read and enter computer data through a variety of tests Proficiency in Excel, Word, and other MS Office applications Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Bringing our love of food to families for five generations! Blount Fine Foods is a family-owned and operated manufacturer, marketer, and developer of premium fresh prepared foods. We are an engaging team, bringing restaurant-quality products to America including single-serve grab-n-go fresh soups, mac & cheese, and entrées in grocery stores across the country, as well as for hot bars and restaurants. Help us create the finest food experiences including those with specialty certifications that include organic, gluten-free, and low sodium, among others. Join a proven team for growth, success, and a satisfying career!330pm - 12amEssential Duties and Responsibilities include the following. Other responsibilities w/similar skill and work conditions as assigned.· Conduct quality audits and influence the proper execution of culinary and cook methods so that product will meet desired quality levels. If necessary, use your culinary knowledge and good judgement to adjust inline to get product within specification.· Aids and Supports facility teams on investigating, analyzing, containing, and correcting quality issues related to customer complaints.· Serve as a resource/ coach for established quality standards and procedures, culinary training and technical support to reduce variability in each process.· Be present and integrated into production activities on the process floor.· Provide follow up monitoring, documenting and feedback of completed initiative controls.· Assure all organoleptic qualities and process standards are appropriate and consistently met.· Monitor and carry-out various batch control tests and product sampling to ensure process is in control.· Maintain, create, and communicate quality control reporting data.· Candidate must be able to interact in a dynamic team environment while displaying tact and diplomacy with peers and management alike in order to achieve goals.· Candidate must be reliable and flexible in order to meet seasonality demands of the business.· Passion for food, team player, influencer, good communicator and has high quality standards.Responsibilities for Food Safety Responsible for completing required paperwork accurately and honestly, where applicable.§ Responsible for completing required paperwork accurately and honestly as applicable.§ Must adhere to all corporate GMPs (Good Manufacturing Practices), established SOPs (Standard Operating Procedures) and all Food and Employee Safety policies.§ Must adhere to all Allergen control programs and procedures as applicable.§ Responsible for reporting suspicious packages, activities and individuals.§ If monitoring CCPs (Critical Control Points), must be trained in HACCP (Hazard Analysis Critical Control Point) and adhere to approved HACCP plan(s).Education and/or Experience· Associate degree (A. S.) from college or university. Culinary and process acumen. Culinary experience in a manufacturing environment preferred. Bachelor's Degree in a related discipline of Food Science, Statisticsor a Culinary field and 2+ years manufacturing experience preferably in a food environment, or equivalent combination of education and work experience.· Quality certification/training/experience preferred.Competencies: “An area of expertise that is fundamental to a particular job or function”In order to perform this position properly, each candidate must demonstrate the following core competencies (not all inclusive).§ Business Knowledgeo Effectively utilizes available tools to maximize contributiono Manages Resources effectivelyo Understands relationships of resources, process, and profito Ability to project future state, and the ability to prepare and deliver one's division to its optimum performance§ Interpersonal Skillso Builds relationships at all levelso Manages conflict effectivelyo Practices early intervention; resolves issues earlyo Communicates effectively; has a point of viewo Inspires trust and Teamworko Is a Motivator§ Judgmento Analyzes problems effectivelyo Demonstrates sound and ethical decision-making, even under pressureo Patient; challenges appropriatelyo Open to ideas of otherso Consistent§ Leadershipo Persuasive in getting others to consider his/her or companies point of viewo Inspires trust; viewpoint actively sought by otherso Fosters collaborationo Overcomes objections with logic and effective communication skillso Able to deliver message of “Culture change”; in a positive, constructive and effective mannero Is a Leader, and is viewed as one Language Skills· Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of organization.

Requirements Be responsible for driving and maintaining your company vehicle which you will take home with you for use during work hours Ability to communicate professionally and clearly with manager and co-workers via phone, text, email, and in-person Mechanically inclined Must have a valid driver's license with a clean driving record and be able to pass pre-employment screenings Ability to lift up to 60 pounds without assistance; up to 150 pounds with assistance Ability to sit or stand for at least 30 minutes Ability to twist and bend at the waist repeatedly Draft Line Quality Technician Benefits: (Part time positions may not include all benefits listed) Competitive Salary Commissions paid for leads generated in the field Medical/Dental/Prescription/Vision plans Paid Time Off 9 paid holidays 401(k) with generous employer match Annual boot reimbursement Employer paid benefits such as life, short-term and long-term disability insurance plans Flexible Spending Accounts (Medical, Dependent care, and Commuter) We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Salary Description $18.00 - $20.00 per hour

The primary result expected from the Quality Control Technician will be to assure product quality by preparing samples, conducting quality control inspection and testing of components, dispersions, and finished goods, determining adjustments for batches that do not conform to requirements, documenting inspections, and insuring calibration of testing equipment. Essential Duties & Responsibilities: Perform testing of production batches, incoming raw materials, finished goods, and components to determine conformance to specifications. Judge as “fit for release” production batches, incoming raw materials, finished goods, and components that are in conformance to all specifications and visually acceptable. Determine and communicate batch adjustments for any batches that do not conform to requirements, utilizing batch history, adjustment guidelines, and consultation with the Senior QC Technician, Assistant Supervisor, or QC Manager. Perform validation testing during filling to insure integrity of finished goods, including labeling, packaging, and fill weights. Communicate current status of inspections to Senior Technicians, Assistant Supervisor, or QC Manager. Communicate issues with work instructions and procedures to Senior Technicians, Assistant Supervisor, or QC Manager. Document inspection results. Required Experience: 1-3 years of production/manufacturing/quality control experience preferred but not required. High school diploma or equivalent, Associate's or Bachelor's degree a plus Some background in physical sciences and algebra Ability to accurately read and enter computer data through a variety of tests Proficiency in Excel, Word, and other MS Office applications Experience in SAP recommended but not required Rust-Oleum is an equal opportunity employer. Employment selection and related decisions are made without regard to sex, race, age, disability, religion, national origin, color, or any other protected class.

Job Title Electrical Installation Inspector Company RL Controls, LLC Education High School Diploma Job type Full-time Mission Control & oversight of the project's site installation activities to maintain the highest safety and quality standards and ensure progress complies with the contract schedule. Accountabilities Supervise and inspect all site activities, signaling, communications and associated minor civil works to ensure execution in accordance with; Delivery Schedule, Site Specific Work Plans, Approved Work Methods, Quality, Safety and Environmental Management Plans and Approved for Construction Drawings. Perform field inspections to evaluate the work performed and materials used; verify quality of workmanship, quality of materials used, and compliance with plans, specifications, estimates, applicable codes and regulations; Note deficiencies and deviations from plans using the nonconformance process; refer serious problems and disagreements in interpretation to the Construction Manager Complete and submit daily site inspection forms and reports Monitor the work progress of the installation, report the daily progress to the Construction Manager, assist with the identification and execution of recovery plans and support the Construction Manager to develop schedule forecasts based upon actual progress. Interpret codes, analyze practices and recommend improvements; maintain, update and assure the accuracy of inspection records, inspection documentation and project files. Provide customer service; answer questions and concerns related to building codes and requirements; consult with contractors and the client concerning non conformances and formal requests for information; investigate complaints and coordinate effective resolution of conflicts and disagreements; interpret, explain and ensure the application of codes and regulations. Competencies Experience with at least one and exposure to some or all of the following: communications installation including optical fiber, signaling and/or low voltage electrical installation minor civil works including excavation, boring and trenching. Experience working on active railroad projects is preferable Skills & Knowledge Licensed Journeyman or Master Electrician. 5+ years' experience as a Supervisor or equivalent OSHA 30 construction safety a plus. Strong communication skills. Available to Day or Night work shifts and over weekends. Local candidates only. Sponsorship is not available for this position. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of the employee for this job. Duties, responsibilities and activities may change at any time with or without notice. RLC is an EEO Employer and uses E-Verify. RLC will offer a competitive salary with benefits including health-dental-vision-life insurance, personal time-off, holidays, 401(k) to qualified candidate.

The QC inspector is responsible for ensuring that all products meet quality standards. This includes inspecting raw materials used in the production process, conducting tests on finished products and performing audits to identify potential areas of improvement. The QC inspector must be knowledgeable of the relevant safety regulations and have excellent attention to detail and problem-solving skills. Essential Functions Responsible for individual Inspection activities Undergo training when necessary Adhere to policies and procedures related to specific customer requirements Ability to understand specific directions and follow guidelines that are common throughout the department Ability to maintain a constant focus on quality and accuracy Ability to work with minimal supervision Specific competencies include but are not limited to following the Gowning, Personal Hygiene Procedures, and all other QC Inspection Work Instructions and SOPs including formatting Excel if required, Use of inspection equipment (Bench Linc, Vision Systems, Tensile Tester, Pin Gages, Ring Gages, Calipers, rulers, and Customer supplied fixtures) Perform Visual Inspection (using Tappi Chart) and Feel Testing. Operating the Annealing Ovens Obey all safety rules, use caution in work activities, and continuously practice safe behaviors Immediately report unsafe conditions/behaviors and work-related injuries to site supervision Qualifications Preferred High school diploma or equivalent 1 year of Product Operator experience necessary Experience within the department must be gained within 90 days for use of specific measuring equipment, displaying an understanding of the job requirements and any devices required to complete inspection/test activities Understand Quality Management System (QMS) requirements Training on the specific equipment must be fully completed within 90 days of hire Equivalent combination of education and experience is preferred An Affirmative Action / Equal Opportunity Employer Proterial Cable America, Inc. provides equal employment opportunities to all employees and applicants for employment without regard to race, color, religion, gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, or veteran status. As a Federal Contractor, we encourage priority referral of protected veterans under VEVRAA.