Quality inspector jobs in Shreveport, LA - 26 jobs

Job Title: Final Assembly Inspector Department: Louisiana Association for the Blind (L.A.B.) Distribution Center Wage Category: Non-Exempt Reports To: Assistant Director, Laser, Design and Die (LDD) Overview: The Final Assembly Inspector is responsible for assembling, kitting, and inspecting products to ensure they meet established quality standards and customer specifications. This role supports production efficiency, product accuracy, and quality compliance while working in an accessible, team-oriented manufacturing environment. Duties include, but are not limited to: Assembly Assemble components and subassemblies using standardized processes, fixtures, and accessible equipment. Follow detailed work instructions and maintain compliance with company quality standards. Use tactile labeling, adaptive measuring tools, and audio/visual aids to verify parts, quantities, and assembly steps. Kitting Perform kitting operations by gathering, counting, and packaging parts into designated kits for production or customer orders. Ensure that all kits are accurately labeled and prepared according to specifications. Quality Assurance Remove products that do not meet production standards and recommend strategies to improve product quality. Check parts against prints and specifications; complete inspection reports. Document packages for presentation to the customer. Perform a wide variety of final inspection duties with minimal supervision. Communication and Collaboration Collaborate with team members and supervisors to ensure smooth workflow and timely order completion. Communicate inspection results, quality concerns, and improvement recommendations to the production team. Report equipment issues, defective parts, or production concerns promptly to a team leader or supervisor. Participate in training related to quality procedures, accessibility tools, and safety practices. General Support Maintain an organized, clean, and safe workstation. Provide kitting and assembling support to various departments, as a floater, when needed. Accessibility and Support Adaptive equipment and assistive technology (such as screen readers, magnification devices, tactile gauges, or talking scales) provided as needed. Work instructions available in accessible formats (braille, large print, or digital with screen reader compatibility). Ongoing training and accommodations provided to support independence and success in the role. Work Environment Manufacturing floor with structured workstations designed for accessibility. Moderate noise level; safety equipment provided. Collaborative, team-focused environment. Physical Requirements Ability to lift and carry boxes weighing up to 35-40 lbs. Ability to bend, reach, and safely stack boxes on pallets or shelving. Ability to remain seated or stand at a workstation for extended periods. Manual dexterity for handling small parts, tools, and assembly Mobility to move within the manufacturing floor as needed. Qualifications High school diploma or equivalent required. Strong attention to detail and ability to perform repetitive tasks with accuracy. Ability to follow verbal instructions, tactile guides, and accessible documentation. Comfortable working with small parts and hand tools (training provided as needed). Effective problem-solving skills and adaptability to various assembly or kitting tasks. Team-oriented with good communication skills. Must be able to follow directions and read product and part specifications. Ability to use thinking and reasoning to solve problems.

Construction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities * Perform field testing of construction materials using a 40-pound nuclear density gauge * Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders * Conduct concrete testing and transport samples to the laboratory for further analysis * Collect, document, and deliver soil samples from job sites to the laboratory * Observe construction activities and accurately record performance data * Perform visual inspections of reinforcing steel (rebar) * Maintain detailed daily field diaries documenting project activities * Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications * Ensure quality and quantity standards are met on all assigned work * Proactively review project documents and testing procedures to understand technical requirements * Communicate professionally and ethically with clients, contractors, and team members * Maintain company-owned equipment in safe, proper working condition * Report any required corrective actions to the Team Leader to ensure work quality meets company standards * Follow all written procedures, company policies, and safety requirements * Complete field activities and reports accurately and in a timely manner * Perform all duties in a professional, ethical manner Additional Responsibilities * Establish personal goals for continuous improvement and job performance * Maintain reliable, punctual, and regular attendance * Attend and actively participate in safety meetings and training programs * Perform other duties as assigned Qualifications Minimum Requirements * High school diploma or equivalent * Minimum of six (6) months of construction materials testing experience * ACI Level I Certification (or ability to obtain) * Nuclear Gauge Certification * Ability to communicate effectively both verbally and in writing * Valid driver's license * Ability to read and write in English * Willingness to travel to various job sites as required * Level and compensation commensurate with experience Physical Requirements * Ability to work flexible schedules and overtime as required by operational needs * Ability to lift and carry a minimum of 50 pounds * Ability to safely operate a company vehicle * Ability to push or pull up to 400 pounds using a wheelbarrow * Ability to walk, stoop, bend, climb stairs and ladders * Ability to work on uneven terrain including concrete, gravel, dirt, and grass * Ability to work at elevated heights and in open structures * Ability to work outdoors for extended periods in varying weather conditions * Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.

PURPOSE: Provide the leadership, direction and oversight to ensure that safe, high quality and timely maintenance and construction work occurs during turnarounds, capital construction projects, and routine maintenance. Ensure that the fixed equipment within their assigned area is constructed and maintained to all applicable codes, standards and meets regulatory compliance. This position reports to the Inspection Supervisor. KEY OBJECTIVES AND RESPONSIBILITIES: Ensure safety, reliability, and mechanical integrity of refinery fixed equipment. Inspect or cause to be inspected all equipment and piping which is critical and/or subject to periodic deterioration. Develop piping and fixed equipment inspection plans, in accordance with API 510, API570 and API 653, using risk-based methodology. Develops methods to analyze and identify the most cost-effective recommendations for repairs, materials selection and other remedial action in support of long-term reliability. Select cost effective inspection techniques to provide reliable assessment of refinery equipment remaining life. Interpret and evaluate inspection and NDE data. Responsible for developing and maintaining an accurate record keeping system for all inspection files. Responsible for maintaining integrity and updating of IDMS; capable of running reports to track compliance and flag integrity issues. Participate in the planning of temporary repairs and approve the execution of such repairs. Develop and maintain fixed equipment inspection procedures/practices. Develop and maintain records in support of Calumet Welding procedures. Review design/fabrication drawings and perform fabrication shop/field inspection to ensure conformance to specifications. Provide technical support to operations and maintenance teams. Coordinate with Maintenance and Operations to ensure that equipment is opened in a logical and efficient manner and the inspection/repair report is available quickly for planning purposes. Manage the daily activities of outside inspection contractors during turnarounds and special activities. Independently inspect and monitor all repair and construction work to be certain it is being done per the plans and adheres to all specifications and codes required. Responsible for reviewing the activities and quality of contractors in conjunction with their QA/QC representative. May train and oversee the work of other Inspectors. Develop concise and accurate inspection and repair scopes for Turnarounds and Scheduled Maintenance Opportunities. Other duties as assigned REQUIRED EDUCATION/EXPERIENCES: High School Diploma or GED. API 510, 570 and 653 are required. VT, UT, PT, MT, RT film interpretation experience required. Minimum of 10 years' experience in the inspection of fixed equipment and piping systems required. Extensive working knowledge of all ASME, API & NBIC Codes required. Experience with inspection techniques and tools required. PREFERRED EDUCATION/EXPERIENCES: API RP 580, 571, AWS-CWI Preferred but not required. Familiarity with PS AIM preferred COMPETENCIES: Demonstration of Calumet Values - Safety, Environment & Social Responsibility, Teamwork, Ownership, Passion for Customers, and Excellence

COME BE A PART OF OUR EXCELLENT TEAM! High School Diploma Preferred, but NOT Required Medical, Dental, and Vision Insurance 100% Company Paid Employee Life Insurance & Short-Term Disability 14 paid Company Holidays 80 Hours of Vacation 40+ Hours of Sick 401K w/ GENEROUS Match Eligible Tuition Reimbursement Eligible for Auto Allowance of $125 per Month Eligible for Wellness Reimbursement of up to $50.00 Per Month Eligible to Receive Referral Bonuses About Hyundai GLOVIS America Inc. GLOVIS America, Inc. is a third-party logistics provider headquartered in Irvine, CA. Since our inception in 2002, we are committed to delivering our customers products via truck, rail, or ocean vessel throughout the U.S., Canada, and Mexico. Glovis America makes every effort to exceed standards by providing quality service to our customers and vendors of the automotive, freight forwarding, parts distribution, used car, and fuel industries. We cater logistics strategies and processes to our customers' needs by utilizing the latest information systems and advanced technologies. Summary The Quality Control Inspector will audit the quality of GLOVIS services including, but not limited to vehicle receiving, processing operations, PIO parts installations, body shop repairs, and Quality Projects as required. Responsibilities include but not limited to: Perform new vehicle audits and process according to customer requirements Perform GLOVIS process audits Perform PIO parts installation inspections Inspect cars using GPQMS Audit App, IVELES, a specialized camera and/or check sheets. Properly document results of the inspection and take pictures of non-conforming items. Alert Supervisor/Manager of quality concerns immediately. Audit employee compliance with standardized processes, procedures, bulletins, and work instructions Assist with the development and implementation of audit strategies, audit related policies and procedures. Assist with the training of new staff on quality inspections. Communicate the status of unresolved quality issues Follow all safety and compliance standards. Assist all departments to achieve positive KPI results. Other duties as assigned Skills Must have good color vision Required Must be willing and able to cross-train in other departmental areas as needed Required Requires flexibility with schedule including break times as well as working extended hours, weekends, and holidays Required Ability to read, write and follow verbal and written instructions Required Ability to manage priorities and organizational skills Required Ability to drive both automatic and straight shift vehicles Required Ability to record and verify numbers 17 characters in length Required Ability to work cross functionally with the ability to conduct positive interaction communication, skills and strengths Required Must have a general knowledge of automobile components Required Education & Experience High School Diploma/G.E.D Required Must hold a valid state-issued driver's license without restrictions Required 1 year of experience required OR an equivalent combination of education and experience Required Experienced in mechanical, installation experience in a port-processing environment Preferred Physical Requirements Drive Lift up to 50lbs Carry up to 50lbs Push/pull Bend/stoop Kneel Squat/crouch Sit, stand, walk constantly Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. Working and Environmental Conditions This position works in a plant manufacturing/warehouse setting at Shreveport, LA Exposure to loud noises from vehicles and heavy machinery Exposure to indoor and outdoor weather conditions Exposure to chemicals/fumes The information contained herein is not intended to be an all-inclusive list of duties and responsibilities of the job, nor is it intended to be an all-inclusive list of skills and abilities required to do the job. Glovis America, Inc. reserves the right to alter and change this job description at any time without notice based on business needs.

Ardaman & Associates, Inc. is one of the largest geotechnical engineering and materials testing consulting firms in the Southeastern U.S. Over our history, we have worked on more than 150,000 projects throughout the Southeast, the U.S., and worldwide. This vast list of project experience includes services for virtually every type of public and private client associated with industrial, commercial and infrastructure projects. Ardaman has the following opportunity available in Shreveport, Louisiana: CONSTRUCTION MATERIALS TESTING TECHNICIAN Full-time entry level position performing sampling/testing of soils, concrete, and asphalt materials on construction projects throughout our North Louisiana / East Texas service area. Typical duties require 80 to 90 percent of time be spent performing tasks at field locations. Will train. Qualifications: Candidate must be currently authorized to work in the United States and have a High School Diploma or equivalent. Must have good math skills, good organizational skills, a good attitude, and get along well in a team environment and be safety minded in all aspects of his work. Must be willing to work weekends and extended hours as required to meet project schedules; be able to lift, carry, push, and pull equipment weighing up to 50 lbs. and have a safe driving record. Individual should be physically fit and able to spend extended hours working outdoors in a wide range of climate conditions. LaDOTD experience a plus. Local candidates preferred; no relocation. We offer a comprehensive benefits program including medical, dental, vision, life insurance, paid time off, 401(k) with company match, and much more. We are an Equal Opportunity Employer. All qualified candidates will be considered without regard to race, color, religion, national origin, age, disability, sexual orientation, gender identity, status as a protected veteran, or any other characteristic protected by law. Ardaman is a wholly owned subsidiary of Tetra Tech, who is a VEVRAA federal contractor and we request priority referral of veterans. Ardaman is a Drug Free Workplace. . Additional Information * Organization: 113 AAI

General Overview: Quality Control will be responsible for performing the daily operations of the Quality Laboratory, a facility that includes wet processing equipment for raw sand and dry processing equipment for processed sand. Responsibilities: Performs quality testing of sand materials and keeps accurate records of results. Performs auditing and inspection activities in order to ensure that quality targets are met for all finished Alpine Silica sand product shipped to customers. Provides direct lab support to Production Manager and may assists with day-to-day operations of Loadout. Prepares sand samples as needed. Communicates quality-problems to plant management. Analyzing, identifying and communicating problematic trends, e.g. recurring first pass issues. Establishes testing procedures and protocols for quality control and may provide training to Lab Technicians/Loadout Operators, who sample, test and document materials that are mined, processed or shipped. Focuses on creating a safety culture that utilizes safe work practices, maintaining a safe and clean work area. Complies with all company policies and procedures. Performs other duties as assigned. Other Requirements: High School Diploma or equivalent minimally required; four-year degree or a minimum of three (3) years' experience in a Quality Control position or lab, preferred. Must be able to work independently, as a member of team, and as a team leader. Mental and Physical Requirements: Able to read, speak and write in English. Strong physical and mental health to maintain demanding, fast-paced workload. Able to work under stressful conditions at times. Develop specific goals and plans to prioritize, organize and accomplish work. Strong work ethics of integrity and honesty; strives for excellence in all activities employing accompanying communication. Dependable, reliable and capable of fulfilling responsibilities. Regularly required to sit or stand, reach and move about the facility. Must be able to traverse unlevel ground and climb and descend stairs on occasion. This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and is subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible.

General Overview: Quality Control will be responsible for performing the daily operations of the Quality Laboratory, a facility that includes wet processing equipment for raw sand and dry processing equipment for processed sand. Responsibilities: Performs quality testing of sand materials and keeps accurate records of results. Performs auditing and inspection activities in order to ensure that quality targets are met for all finished Alpine Silica sand product shipped to customers. Provides direct lab support to Production Manager and may assists with day-to-day operations of Loadout. Prepares sand samples as needed. Communicates quality-problems to plant management. Analyzing, identifying and communicating problematic trends, e.g. recurring first pass issues. Establishes testing procedures and protocols for quality control and may provide training to Lab Technicians/Loadout Operators, who sample, test and document materials that are mined, processed or shipped. Focuses on creating a safety culture that utilizes safe work practices, maintaining a safe and clean work area. Complies with all company policies and procedures. Performs other duties as assigned. Other Requirements: High School Diploma or equivalent minimally required; four-year degree or a minimum of three (3) years' experience in a Quality Control position or lab, preferred. Must be able to work independently, as a member of team, and as a team leader. Mental and Physical Requirements: Able to read, speak and write in English. Strong physical and mental health to maintain demanding, fast-paced workload. Able to work under stressful conditions at times. Develop specific goals and plans to prioritize, organize and accomplish work. Strong work ethics of integrity and honesty; strives for excellence in all activities employing accompanying communication. Dependable, reliable and capable of fulfilling responsibilities. Regularly required to sit or stand, reach and move about the facility. Must be able to traverse unlevel ground and climb and descend stairs on occasion. This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and is subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible.

General Overview: Quality Control will be responsible for performing the daily operations of the Quality Laboratory, a facility that includes wet processing equipment for raw sand and dry processing equipment for processed sand. Responsibilities: Performs quality testing of sand materials and keeps accurate records of results. Performs auditing and inspection activities in order to ensure that quality targets are met for all finished Alpine Silica sand product shipped to customers. Provides direct lab support to Production Manager and may assists with day-to-day operations of Loadout. Prepares sand samples as needed. Communicates quality-problems to plant management. Analyzing, identifying and communicating problematic trends, e.g. recurring first pass issues. Establishes testing procedures and protocols for quality control and may provide training to Lab Technicians/Loadout Operators, who sample, test and document materials that are mined, processed or shipped. Focuses on creating a safety culture that utilizes safe work practices, maintaining a safe and clean work area. Complies with all company policies and procedures. Performs other duties as assigned. Other Requirements: High School Diploma or equivalent minimally required; four-year degree or a minimum of three (3) years' experience in a Quality Control position or lab, preferred. Must be able to work independently, as a member of team, and as a team leader. Mental and Physical Requirements: Able to read, speak and write in English. Strong physical and mental health to maintain demanding, fast-paced workload. Able to work under stressful conditions at times. Develop specific goals and plans to prioritize, organize and accomplish work. Strong work ethics of integrity and honesty; strives for excellence in all activities employing accompanying communication. Dependable, reliable and capable of fulfilling responsibilities. Regularly required to sit or stand, reach and move about the facility. Must be able to traverse unlevel ground and climb and descend stairs on occasion. This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and is subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible.

General Overview: Quality Control will be responsible for performing the daily operations of the Quality Laboratory, a facility that includes wet processing equipment for raw sand and dry processing equipment for processed sand. Responsibilities: * Performs quality testing of sand materials and keeps accurate records of results. * Performs auditing and inspection activities in order to ensure that quality targets are met for all finished Alpine Silica sand product shipped to customers. * Provides direct lab support to Production Manager and may assists with day-to-day operations of Loadout. * Prepares sand samples as needed. * Communicates quality-problems to plant management. Analyzing, identifying and communicating problematic trends, e.g. recurring first pass issues. * Establishes testing procedures and protocols for quality control and may provide training to Lab Technicians/Loadout Operators, who sample, test and document materials that are mined, processed or shipped. * Focuses on creating a safety culture that utilizes safe work practices, maintaining a safe and clean work area. * Complies with all company policies and procedures. * Performs other duties as assigned. Other Requirements: * High School Diploma or equivalent minimally required; four-year degree or a minimum of three (3) years' experience in a Quality Control position or lab, preferred. * Must be able to work independently, as a member of team, and as a team leader. Mental and Physical Requirements: * Able to read, speak and write in English. * Strong physical and mental health to maintain demanding, fast-paced workload. * Able to work under stressful conditions at times. * Develop specific goals and plans to prioritize, organize and accomplish work. * Strong work ethics of integrity and honesty; strives for excellence in all activities employing accompanying communication. * Dependable, reliable and capable of fulfilling responsibilities. * Regularly required to sit or stand, reach and move about the facility. * Must be able to traverse unlevel ground and climb and descend stairs on occasion. This job description should not be interpreted as an exhaustive list of responsibilities or as an employment agreement between the employer and employee. The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification and is subject to change as the needs of the employer and requirements of the job change. Any essential functions of this position will be evaluated as necessary should an employee/applicant be unable to perform the functions or requirements due to a disability as defined by the Americans with Disabilities Act (ADA). Reasonable accommodation for the specific disability will be made for the employee/applicant when possible.

Are we the road to your future? We are currently searching for an experienced Senior CEI Inspector to support our Southwest Region located in Shreveport, LA. To be considered for this position, applicants must have, at minimum, 5 years of progressive inspection level experience. What you'll be doing: Inspection for compliance with contract documents, standards, and specifications Testing of materials and review of plans Keeping daily diaries on project operations, resolves daily constructability issues and trouble shoots problems to mitigate delays to contractor's progress Monitors contractor's daily operations and performs and/or reviews test reports to ensure that all work and materials conform to specifications, plans and contractual provisions. Also monitors utility relocation efforts by inspecting and tracking relocation work Documenting pay records, performing construction calculation, and computer/iPad entry Anticipates contractual problems and advises supervisor of the need for plan revisions, supplemental agreements, or other contract adjustments to improve safety, timely delivery and/or quality of delivered product Effectively communicates and coordinates work with contractors, subcontractors, utility owners, and property owners to minimize delays and disturbances while maximizing progress of the projects Mentor and train entry level inspection staff Lead a staff of inspector on large scale or group of smaller projects What you need to have: 5+ years of progressive inspection level experience or equivalent combination of education and experience Must be able to perform moderate physical activity including but not limited to walking, climbing, balancing, kneeling, and standing Must be able to work nights and weekends as required Must apply safety philosophy and program to all operations Ability to pass a pre-employment drug screening to ensure a safe and productive work environment. Volkert adheres to federal guidelines, which may include testing for substances such as marijuana. Please note that federal regulations may differ from state-specific guidelines If applicable to the position, a post offer fit for duty evaluation to ensure the individual can safely perform the essential functions of the role Valid driver's license A satisfactory motor vehicle report (MVR) Why Volkert? Volkert is employee owned and a Top 100 design firm, committed to providing clients with creative solutions for sustainability, including improvements to infrastructure, the environment, and natural resources. Founded in 1925, Volkert is celebrating a century of serving our employees, clients, partners, and communities. At Volkert, we pride ourselves on providing all of our employees with competitive compensation, positive work/life balance, and professional development opportunities, as well as fostering a diverse and inclusive workplace in all of our offices nationwide. Key Benefits: Employee Stock Ownership Plan (ESOP) Medical, Dental, & Vision 401(k) retirement savings plan + employer matching Paid Time Off (PTO) and holidays Employer-Paid Life/AD&D insurance Employer-Paid short-term disability and long-term disability Wellness incentives Student Debt Retirement Match Additional voluntary benefits The words from our Chairman of the Board and Chief Executive Officer, Thomas A. Hand, PE, capture best how you can make an impact while working for Volkert. “ For a century, Volkert has done meaningful work that improves our infrastructure and quality of life throughout our communities. We are proud of our one-hundred-year legacy and humbled by the opportunities ahead of us as we look forward to our next century of service. With our commitment to employee ownership and sustainable growth, you can build a career here that really makes a difference .” - Thomas A. Hand, PE, Chairman of the Board and Chief Executive Officer EOE-Race/Sex/Vets/Disabled Volkert does not accept unsolicited resumes from headhunters, recruitment agencies or fee-based recruitment services. Louisiana #LI-DNI

Builders Supply, A CRH company, is a leading supplier of ready mixed concrete, reinforcing steel, and building materials in Louisiana. Our focus is to provide quality products and reliable customer service with a safety-first mindset. We consider our employees our greatest strength and we make it our priority to invest in their development and well-being. When you work for Builders Supply, you are helping to support and build the infrastructure of Louisiana. Position Overview Provide inspection, testing services, and documentation for ready mix plant facilities. Develop and maintain relationships with key customers, facility managers, DOT personnel, State, Parish, and Municipal personnel. Develop and maintain relationships with material suppliers. The Quality Control Technician will assist the company in elevating the customers' perception and general quality of our mix designs, achieving the elimination of lost loads, the generation of backup data necessary for mix optimization and overseeing the inspection process of DOT jobs. Key Responsibilities (Essential Duties and Functions) * Create an attitude of Safety, contribute to the safe operation of the department; maintain a safe, clean work area. * Use accepted methods to inspect, sample, and test materials for the purpose of quality control. * Sample and test mixtures to stay in compliance with contract specifications and quality control tolerance. * Follow quality control plans and guidelines as assigned. * Responsible for ensuring the proper mix design, scale weights and water demand of mix designs at batch plants. * Performs physical tests on ready mix concrete at plant, such as slump, entrained air, unit weight and yield, time of setting and compressive strength. * At point of delivery, spot checks sample physical properties as above and discusses necessary adjustments in batch weights with Manager, plus observes workability, finish ability, and contractor's use or misuse of product. * Performs on-site surveys of fleets and facilities producing products so as to be able to identify delivery problems and recommend solutions. * Performs physical tests on ready mix concrete aggregates, such as gradations, decants, sand equivalency, specific gravity and density, absorption. * Monitor and test process functions and materials daily to ensure our products meet or exceed requirements of the appropriate agency or customer. * Prepare and record accurate information; maintain test results database./ Keeps a written daily log of activities and observations. * Obtain required certifications in a timely manner. * Maintain all laboratory equipment, keeping track of all certification paperwork on lab scales and other equipment that requires annual re-certification. * Follow directions of manager as to daily tasks and expectations for each specific duty. * Ensure a safe work environment in compliance with all safety policies and procedures using the appropriate tools and equipment for the task. * Follow all company policies and OSHA / MSHA regulations for safe working procedures. * Develops and maintains appropriate working relationship so that individuals will be able to inform Distribution, Production and/or Sales of conditions that could adversely affect good, efficient delivery service and take necessary action to correct the condition. * Investigates and reports complaints pertaining to quantity, quality, or performance. * Writes job inspection reports when required. * Maintains QA/QC databases. * Regular and predictable attendance at assigned times is required. * Other duties as may be assigned. Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Education/Experience * Minimum of high school diploma or general education degree (GED) required. * ACI Field Grade I Testing Technician * ACI Aggregate or Laboratory Certification; NRMCA Certification is a plus * Experience in the collection, testing and reporting of concrete and/or aggregate samples. * Must obtain and maintain DOT certifications required to test concrete as required by state regulations. * Less than one year of experience in a related field is required. Work Requirements * Must be 18 years in age or older. * Must pass pre-employment physical, drug screen and criminal background check. * Must be able to provide valid documentation for Form I-9. * Must have strict adherence to safety requirements and procedures as outlined in the Employee Handbook. * Must be willing to work in a team environment and assist co-workers or supervisors with other duties as required. * Must have valid driver's license and meet the qualifications of the fleet safety program. * Must be willing to travel and work away from home when required. * Must be willing to work nights and weekends when necessary. * Individuals are required to wear personal protective equipment (PPE) in designated operations and production areas as stated by OSHA and/or MSHA. Protective equipment that may be required, but not limited to, for this position is: Face Shield, Safety (hard toe) Shoes, and Coveralls. * Compliance with all OSHA and/or MSHA regulations. Knowledge/Skill Requirements * Must know and understand all DOT regulations, such as sampling frequency, sampling methods, graduation requirements, quality requirements, etc. * Working knowledge of ACI, ASTM, DOT and Regional standards and specifications. * Knowledge of the aggregate and concrete manufacturing process. * Proven ability to develop relationships and to work with teams as both a leader and a participant. * Effective interpersonal and communication skills; building rapport, listening, presenting, giving, and receiving feedback. * Must be able to perform simple mathematic calculations. * Must have or acquire basic computer skills and be able to work with e-mail and simple spreadsheets. Physical Requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. * Able to stand, walk, use hands and fingers to manipulate objects or controls, climb or balance, stoop, kneel, crouch, crawl, talk and hear. * May require sitting for extended periods of time. * Lift, carry and hold materials, tools and supplies. * Vision abilities (with correction) include close, distance, peripheral, depth, and the ability to adjust focus. * Must be able to hold weights of 5-10lbs in a stretched arm position for extended periods of time. * Must be able to lift 75 lbs (minimum) on a repetitive basis. * Able to stand on hard surfaces for extended periods of time. Work Environment * Able to work in all weather conditions. * Able to work extended hours if needed. * Job hazards include exposure to dust, noise, fumes, and all weather conditions. The statements included in this job description are not intended to be all-inclusive. They represent typical elements and criteria necessary to successfully perform the job. Other duties may be assigned as required. Requirements for this job are subject to modification by the Company and its designees, and reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. What CRH Offers You * An inclusive culture that values opportunity for growth, development, and internal promotion * Competitive base pay * Medical, dental and disability benefits programs * Group retirement savings program * Health and wellness programs About CRH CRH has a long and proud heritage. We are a collection of hundreds of family businesses, regional companies and large enterprises that together form the CRH family. CRH operates in a decentralized, diversified structure that allows you to work in a small company environment while having the career opportunities of a large international organization. For more information visit: *********** Come build your career with us! Apply today and find out how your skills and experience can translate to opportunities that advance your career. Please complete your online application and profile for consideration. Builders Supply, A CRH Company, is an Affirmative Action and Equal Opportunity Employer. EOE/Vet/Disability CRH is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, status as a protected veteran or any other characteristic protected under applicable federal, state, or local law. Date: Nov 11, 2025

Temp To Full-Time Quality Crush/Crop Inspector Operate the cross roll straightener; Perform flattening tests. Act as a key team member for production by performing key completion tasks for post-welded (pre-finished) material. Communicate results of process quality department. Production a. Straightener Operation: ? Operate the cross roll straightener in a safe and productive manner. ? Make adjustments to CRS rolls for setups and crooked pipe. ? Monitor pipe after the straightening process. ? Notifies the supervisor and quality if the pipe is not straight. ? Performs crush test. ? Reports results to the Production and Quality Supervisors. ? Report all mechanical failures. ? Maintain neat and orderly working environments. ? Perform any and all other operational requirements for safe and efficient use including any lock-out tag-out procedures. a. Operation: Operates the saw to cut material to specification. ? Operate Oto Saw in a safe productive manner. ? Cut material to specific tolerance. ? Responsible for sizing and straightening of pipe. ? Monitor quality and notify the supervisor if the problem is not corrected. ? Perform regular maintenance on saw and conveyors. ? Maintain stencil head. ? Report all problems of mechanical failure. b. Repair / Maintenance: Analyze, troubleshoot, and perform preventative and reactive maintenance on the mill with the chief focus of ensuring alignment so that the product runs on-spec. ? Additionally, perform basic "housekeeping" duties. Starting pay $17/hr. Pay is negotiable with knowledge/experience 6AM-4:30PM M-TH with a 30-minute unpaid lunch. Must be able to work OT, as needed. * Friday work day TBD Operate end facer to bevel ends of the pipe. Acts a key production team member to ensure that product conformity is achieved and that production continues efficiently. Please apply online or call ************

Job Description Coming February 1st, 2026! We're gearing up for an exciting new chapter and are looking for great people to join us. Housekeeping Quality Assurance Inspector (Guest Room Inspections) Starts at $13.00-14.00/hr The Burks Companies, Inc. (TBC) is looking to hire full time Housekeeping Quality Assurance Inspectors. Are you an energetic, get-it-done person who is looking for full-time work? Do you want to work with a team that treats each other with dignity & respect and coaches each other? Do you want to work at a place where you have the tools supplies and chemicals that you need to do your job? This Guest Room Housekeeping Quality Assurance Inspector position will place you in a brand new, fully renovated luxury hotel/casino with a fantastic team. This position's starting pay is $13.00-14.00/hour, depending on experience. TBC offers a very comprehensive housekeeping training program. We also offer medical, dental, vision, life insurance, direct deposit as well as holiday and vacation pay. Our team is a very diverse group of employees and we have a strong track record of promoting from within! If this sounds like the right opportunity for you, apply today! ABOUT THE BURKS COMPANIES, INC. (TBC) After more than 30 years in business, TBC has firmly established itself as a leading integrated facilities management (IFM) company. We are a leader in providing support services to the absolute best clients in the commercial, life sciences & hospitality industry, and other prominent industries which offers you an opportunity to work in the best environments. Our clients reside in very high-profile facilities, which rely on making the best first impression to their guests and visitors, requiring the highest standards of cleanliness and appearance. We achieve these standards for our clients by retaining an awesome team. That's why we offer you competitive wages, a comprehensive benefits program, a positive, respectful work environment and culture, opportunities for growth, and more! A DAY IN THE LIFE OF A GUEST ROOM QUALITY CONTROL INSPECTOR As a Guest Room Quality Control Inspector you are a critical member of our team - you will be charged with inspecting the "quality of clean" that our housekeeping attendants have achieved after they have completed the cleaning of guest rooms. The delivery of CONSISTENT QUALITY is a key component in the delivery of positive experiences to our clients' guests. As such, when you arrive for your shift, you are energized and ready to get to work. Your role is to carefully inspect every detail, edge and corner, high and low of the guest rooms and other guest-experience areas such as the guest corridors, guest elevators, and fitness center. You will evaluate and rate the cleaning performance after areas have been cleaned and report results immediately to the Hotel Housekeeping Supervisor assigned to the area so they can have any deficiency immediately addressed. Responsible for reporting room discrepancies related to maintenance problems to the supervisor. QUALIFICATIONS FOR A HOUSEKEEPING QUALITY CONTROL INSPECTOR 21 years old or older Knowledge of computers. Possess a good command of the English language (Bi-lingual is a plus) and ability to clearly and pleasantly communicate with guests and fellow team members. Thorough knowledge of hotel services. Must have professional image and personality exuding confidence and team building skills. Ability to focus attention to details and be able to organize, prioritize and follow up. Ability to maintain confidentiality and security of all guests and general hotel information. Ability to work flexible hours, including weekends and evenings if necessary. Work experience as a Housekeeping Supervisor and/or QA Inspector or similar role is a positive. Hands-on experience with cleaning and maintenance tasks for large organizations Excellent organizational and communication management skills Stamina to handle the physical demands of the job Previous commercial cleaning or hospitality experience would be a plus! Are you fast, efficient, self-motivated, and eager to do a good job? Do you have a ultra-keen eye for detail! Do you have a positive, can-do attitude? Are you the kind of person who prefers to be on your feet moving around? Are you honest and respectful of people's privacy and property? If so, then you might just be perfect for this Housekeeping Quality Control Inspector position! Job Duties: Customer Service: Responds promptly to customer needs, requests for service and assistance. Respond to special requests from guests. Team Work: Treats people with respect. Keeps commitments. Upholds organizational values. Assists with preventative cleaning programs as assigned. Quality: Demonstrates accuracy and thoroughness; monitors own work to ensure quality. Maintains cleanliness of storage room and stock carts. Quantity: Meets productivity standards and completes work within a timely manner. Completes rooms within approved budget and time. Safety and Security: Observes safety and security procedures; reports potentially unsafe conditions; uses chemicals and equipment properly. Responsible for any assigned keys and for following key control policies. Dependability: Is consistently at work and on time. Arrives at scheduled meetings and appointments on time. Is able to meet the demands of the industry with regard to working holidays and weekends. Initiative: Volunteers readily. Asks for and offers help when needed. Check with supervisor upon completion of room assignments before leaving for the day. Compliance: Report all lost and found articles and maintenance issues to supervisor. Reports all "Do not Disturbs" and "Refuse Services" to supervisor. Education & Experience: High School diploma or equivalent is preferred. Six months previous housekeeping experience is a plus READY TO JOIN OUR AWESOME COMMERCIAL CLEANING TEAM? We understand your time is valuable and that is why we have a very quick and easy application process. If you feel that you would be right for this Porter position, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! THIS COMPANY IS AN EQUAL OPPORTUNITY EMPLOYER Job Posted by ApplicantPro

Job Responsibilities: * Evaluate subcontractor qualifications and capabilities to ensure they meet project quality requirements. * Oversee and execute all MEP inspection and testing activities for the project. * Support design reviews and verify contract document and code compliance on Design-Build projects. * Manage the complete MEP and fire protection submittal process. * Ensure all contractual requirements related to testing, documentation, and recordkeeping are met. * Control and manage calibrated measuring and testing equipment used on the project, including maintaining current calibration records. * Maintain organized and accurate project quality records throughout construction. * Ensure proper preparation, organization, and on-time turnover of complete quality control documentation packages. * Conduct subcontractor facility evaluations to assess their ability to meet quality standards. * Provide periodic Quality Program training for site supervisory personnel. * Assist with quality audits, performance tracking, and quality management planning. * Perform additional duties as required by the QC Department and day-to-day project needs. * Work within defined tolerances, standards of accuracy, and established procedures. * Comply with BLHI company policies, the BLHI Safety Manual, and all OSHA safety requirements. Qualifications: * Minimum of five (5) years of formal training and experience on industrial, commercial, or federal construction projects. * Strong working knowledge of mechanical, electrical, plumbing, and control systems, including installation, coordination, operation, startup, and commissioning. * Ability to effectively communicate and collaborate with project team members, clients, subcontractors, and craft personnel. * Ability to obtain or currently possess required inspection licenses and/or certifications.

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian Group - Join Us Comprehensive Benefit Package including Medical, Dental, Vision and Life Insurance. 401K Savings Plan with Company Matching Contributions, Paid Holidays and Vacation. Overview: The QA Lab Tech ensures product compliance at the point of production, laboratory testing, data analysis, and support for root cause investigations. This role is key in maintaining quality standards and driving continuous improvement on the manufacturing floor. Compensation: $25.80/hr Schedule: 2-2-3 12-hour shift (day/night shift available) Training Hours: Mon-Fri 7am - 3pm Job Duties: • Support production by being a QA presence at production lines. • Interact with operators and helpers to ensure standard work is done consistently. • Provide technical support for lab operations. • Select and test products at various production stages. • Perform destructive and non-destructive testing. • Collaborate with management and engineering on standards. • Follow safety and procedural guidelines strictly. • Record and evaluate test data, noting deviations. • Input data into analysis systems. • Execute routine tasks accurately and timely. • Serve as a quality contact for operators and helpers. • Conduct and document production audits. • Maintain a quality presence in production areas. • Perform other reasonable tasks as assigned. Key Job Requirements: • Results-driven with manufacturing experience. • Adaptable to fast-paced environments. • Detail-oriented with big-picture awareness. • Skilled in multitasking under pressure. • Strong communicator and motivator. • Critical thinker with analytical skills. • Proficient in written and verbal communication. • Strong planning, leadership, and computer skills. Desired Background: • 2-4 years in wire and cable or related industry. • Experience with various software systems. • Project management and Lean Manufacturing familiarity. Work Environment and Physical Requirements: • Ability to stand for extended periods of time (up to 8-10 hours per shift). • Ability to walk long distances within the plant and between workstations. • Ability to lift and carry up to 40 pounds occasionally. • Manual dexterity and ability to handle small tools and lab equipment. • Ability to bend, stoop, reach, and perform repetitive motions as needed. • Tolerance to working in varying environmental conditions (e.g., heat, noise) Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at *********************************. ************************************************************************************ ******************************************************************************************************* ********************************************************************************************

and is located in Bossier City, LA. Night Shift: 5pm-5am JOB SUMMARY: Inspects and audits the processes and product to ensure they conform to the company's quality standards. Performs a variety of inspection tasks to determine compliance including receiving, in process and final inspection of parts, subassemblies and finished assembled products. * Required as the primary job function, Experience with Precision Measuring Tools performing Geometric Dimension & Tolerance inspection of machined parts, to detailed blueprints, with additional desired skill with CMM, Faro, Calypso/CAM2 or other CMM experience. ESSENTIAL FUNCTIONS, ROLES AND RESPONSIBILITIES: Essential duties and responsibilities include the following. * Practice safe work habits and comply with all quality, safety, health and environmental policies, procedures, programs and regulations. * Visual and dimensional inspection of wellhead and valve components to ensure conformance to Engineering drawings and specifications. * Perform in-process inspection for setout/staged equipment * Performing Final Inspection of all outgoing equipment * Completes quality documentation accurately and legibly * Verification of job packages for complete signoffs * Measure dimensions using precision instruments * Hardness test parts * Reports time against jobs * Processing Nonconformance Reports (NCR) at location. * Assisting with Field Performance Report (FPR) investigations * Processing Engineering Change Notices (ECN) including inspecting inventory and processing NCR's * Perform other regular duties as assigned or requested. REQUIREMENTS: EDUCATION, TRAINING, EXPERIENCE: * High School diploma or general education degree (GED): or a minimum of 2 years related experience and/or training; or equivalent combination of education and experience. * Required as the primary job function, Experience with Precision Measuring Tools performing Geometric Dimension & Tolerance inspection of machined parts, to detailed blueprints, with additional desired skill with CMM, Faro, Calypso/CAM2 or other CMM experience. CERTIFICATIONS, LICENSES, REGISTRATIONS: * None Required * Additional desired skill, ASNT Level II MT and PT, not the primary job function. * Additional desired skill, AWS CWI, not the primary job function. JOB KNOWLEDGE, SKILLS, ABILITIES: * Working knowledge of Quality Systems, Mechanical, Electronic and Hydraulic experience. Proficient in dimensional inspection of wellhead and valve components. * Must understand, use and properly apply dimensional inspection equipment such as tape measures, scales, OD and ID micrometers, calipers, depth gages, thread inspection equipment of all types. * Ability to read and interpret wellhead and valve component engineering drawings, Basic Computer Skills, Basic Language Skills, Strong Mathematical Skills and Basic Reasoning Ability. * Must perform and pass an annual eye test. * Strong math skill and proficient reading * Knowledge of Quality System SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. * Regularly required to stand; walk; reach with hands and arms; talk and hear. * Regularly required to use hands to finger, handle, or feel. * Regularly lift and /or move up to 10 pounds, frequently lift and/or move up to 25 pounds and occasionally lift and/or move up to 40 pounds. * Close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential function. * Normally work in an inspection and assembly area. * Occasionally may be exposed to hazards such as loud noise, heavy equipment, temperature extremes, toxic and caustic chemicals; risk of electrical shock. * The noise level in the work environment is usually moderate. Disclaimer: This job description indicates the general nature and level of work expected of the incumbent. It is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities required of the incumbent. Incumbent may, and probably will be asked to perform other duties as required. Each employee, regardless of classification, is required to maintain a safe, orderly and clean workplace, using safety precautions and observing safety rules at all times.

Prysmian is the world leader in the energy and telecom cable systems industry. Each year, the company manufactures thousands of miles of underground and submarine cables and systems for power transmission and distribution, as well as medium low voltage cables for the construction and infrastructure sectors. We also produce a comprehensive range of optical fibers, copper cables and connectivity for voice, video and data transmission for the telecommunication sector. We are 30,000 employees, across 50+ countries. Everyone at Prysmian has the potential to make their mark; because whatever you do, wherever you are based, you will be part of a company that is helping transform the world around us. Make Your Mark at Prysmian Group - Join Us Comprehensive Benefit Package including Medical, Dental, Vision and Life Insurance. 401K Savings Plan with Company Matching Contributions, Paid Holidays and Vacation. Overview: The QA Lab Tech ensures product compliance at the point of production, laboratory testing, data analysis, and support for root cause investigations. This role is key in maintaining quality standards and driving continuous improvement on the manufacturing floor. Compensation: $25.80/hr Schedule: 2-2-3 12-hour shift (day/night shift available) Training Hours: Mon-Fri 7am - 3pm Job Duties: * Support production by being a QA presence at production lines. * Interact with operators and helpers to ensure standard work is done consistently. * Provide technical support for lab operations. * Select and test products at various production stages. * Perform destructive and non-destructive testing. * Collaborate with management and engineering on standards. * Follow safety and procedural guidelines strictly. * Record and evaluate test data, noting deviations. * Input data into analysis systems. * Execute routine tasks accurately and timely. * Serve as a quality contact for operators and helpers. * Conduct and document production audits. * Maintain a quality presence in production areas. * Perform other reasonable tasks as assigned. Key Job Requirements: * Results-driven with manufacturing experience. * Adaptable to fast-paced environments. * Detail-oriented with big-picture awareness. * Skilled in multitasking under pressure. * Strong communicator and motivator. * Critical thinker with analytical skills. * Proficient in written and verbal communication. * Strong planning, leadership, and computer skills. Desired Background: * 2-4 years in wire and cable or related industry. * Experience with various software systems. * Project management and Lean Manufacturing familiarity. Work Environment and Physical Requirements: * Ability to stand for extended periods of time (up to 8-10 hours per shift). * Ability to walk long distances within the plant and between workstations. * Ability to lift and carry up to 40 pounds occasionally. * Manual dexterity and ability to handle small tools and lab equipment. * Ability to bend, stoop, reach, and perform repetitive motions as needed. * Tolerance to working in varying environmental conditions (e.g., heat, noise) Prysmian, as an Equal Opportunity Employer, aims to attract and recruit individuals with diverse backgrounds, skills, and abilities. We strongly believe that diversity brings significant value at all levels of the organization, increasing the possibility of capturing market opportunities and maximizing value for our customers and stakeholders. With Diversity, Equity, and Inclusion (DE&I) as part of our Social Ambition 2030 and a strategic pillar of our Company culture, Prysmian is committed to the development of an organization that prioritizes talent, where people feel respected, included, and free to fully express their potential just as they are. All Managers and HRs in Prysmian are responsible for ensuring DE&I policies are respected during the recruiting process, as well as recognizing and mitigating unconscious biases that must not influence our selection processes. All persons will be considered for employment without regard to their race, ethnicity, religion, nationality, origin, citizenship status, socio-economic status, age, sex, gender identity or expression, sexual orientation, marital status, disability, military service or veteran status, pregnancy, parental leave, medical conditions, or any other characteristic protected by applicable federal, state or local laws. Prysmian will endeavor to make a reasonable accommodation for any disclosed physical or neurological condition or disability of a qualified applicant unless the accommodation would impose an undue hardship on the operation of our business. Visit our DE&I Page to learn more about Prysmian's commitments. Your application data will be treated according to our Data Protection Policy. If you believe you require assistance to complete this form or to participate in an interview, please contact us at *********************************. ************************************************************************************ ******************************************************************************************************* ********************************************************************************************

Job Description Apply HERE Only FAR Inspections is looking for highly motivated individuals to perform residential occupancy verifications on behalf of mortgage lenders. Independent contractors earn predictable full-time or supplemental income and enjoy a flexible schedule. Experience with mortgage field inspections is not required but an ability to effectively manage time and meet deadlines is crucial. Based in Reno, NV, FAR Inspections has been in business for over 9 years. Please visit our website to learn more. What is an Occupancy Verification? Mortgage lenders require periodic updates on their properties and to do this they send out independent contractors. The purpose of the property inspection is: To verify property occupancy. To report on the general condition of the property using a mobile application. Most inspections are exterior only. About 10% require interior photos after the property has gone vacant. We contract with inspectors at a county level. This means that you would be responsible to complete all inspections in your county. In some cases, you will split the county with another inspector if there is enough volume for two inspectors. Responsibilities Most common type of inspection should only take 5-6 minutes. Complete the inspection within 4 days after it is assigned. Report general property conditions and make a determination of occupancy based on industry standards. Take 9+ photos of the property with brief comments. Complete a short form in an app. Requires being able to spend extended periods of time driving while making numerous stops during the day in the assigned territory. Requirements (to be considered you must have the following): Computer with an internet connection Reliable vehicle (good gas mileage is a plus as you will be paying for your own gas) Smartphone (Android or iPhone) Printer Pass a standard background check using a valid driver's license Pay and Hours This is a 1099 position. Each inspection has a flat rate. Rates vary based on county and volume. Although you are paid per inspection, you will earn the equivalent of $20-$30 per hour. Depending on a county and if it is urban or rural you will complete anywhere from 20-500 inspections per month working 2-30 hours per week. Lower volume counties have higher rates and higher volume counties have lower rates. There is no set amount of inspections per month, but the work is consistent month-to-month. Earn more as you become established, have greater availability to inspect or are willing to cover a larger territory. No additional mileage reimbursement above the flat fee per inspection. Apply HERE Only Powered by JazzHR qfq GHm4kBw

Job DescriptionConstruction Materials Testing (CMT) Technician Thompson Engineering is seeking qualified Construction Materials Testing (CMT) Technicians for multiple locations. This position is responsible for the daily oversight of construction materials testing and inspection activities on active construction sites to ensure compliance with project specifications, industry standards, and quality requirements. Ideal candidates will demonstrate flexibility and a willingness to travel across multi-states to various job sites as needed. Key Responsibilities Perform field testing of construction materials using a 40-pound nuclear density gauge Obtain concrete samples from ready-mix trucks and prepare concrete test cylinders Conduct concrete testing and transport samples to the laboratory for further analysis Collect, document, and deliver soil samples from job sites to the laboratory Observe construction activities and accurately record performance data Perform visual inspections of reinforcing steel (rebar) Maintain detailed daily field diaries documenting project activities Prepare and submit daily reports and required documentation to the Team Leader in accordance with project specifications Ensure quality and quantity standards are met on all assigned work Proactively review project documents and testing procedures to understand technical requirements Communicate professionally and ethically with clients, contractors, and team members Maintain company-owned equipment in safe, proper working condition Report any required corrective actions to the Team Leader to ensure work quality meets company standards Follow all written procedures, company policies, and safety requirements Complete field activities and reports accurately and in a timely manner Perform all duties in a professional, ethical manner Additional Responsibilities Establish personal goals for continuous improvement and job performance Maintain reliable, punctual, and regular attendance Attend and actively participate in safety meetings and training programs Perform other duties as assigned QualificationsMinimum Requirements High school diploma or equivalent Minimum of six (6) months of construction materials testing experience ACI Level I Certification (or ability to obtain) Nuclear Gauge Certification Ability to communicate effectively both verbally and in writing Valid driver's license Ability to read and write in English Willingness to travel to various job sites as required Level and compensation commensurate with experience Physical Requirements Ability to work flexible schedules and overtime as required by operational needs Ability to lift and carry a minimum of 50 pounds Ability to safely operate a company vehicle Ability to push or pull up to 400 pounds using a wheelbarrow Ability to walk, stoop, bend, climb stairs and ladders Ability to work on uneven terrain including concrete, gravel, dirt, and grass Ability to work at elevated heights and in open structures Ability to work outdoors for extended periods in varying weather conditions Ability to wear required personal protective equipment (PPE) About Thompson Engineering Founded in 1953, Thompson Engineering provides quality assurance and professional services for construction projects supporting industrial, infrastructure, and community development. Our services include drilling, materials testing, construction inspection, chemistry laboratory services, engineering design, environmental assessments, surveying, geotechnical studies, and construction management. Today, Thompson Engineering is recognized for leadership on projects that define skylines, coastlines, and transportation networks across the Southeast. From project planning and design through construction and completion, we deliver innovative solutions to complex infrastructure and building challenges for industrial, commercial, transportation, federal, and municipal clients.