RBC Bearings jobs in Santa Fe Springs, CA - 33 jobs

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components and essential systems for the industrial, defense and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing and manufacturing capabilities for the diversified industrial, aerospace and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. ESSENTIAL FUNCTIONS OF THE JOB: * Performs typical machine shop and mold press operations to support the assembly floor. * Detects and reports defective materials or questionable conditions to the department supervisor. * Maintains the work area and equipment in a clean orderly condition and follows prescribed safety regulations. * Performs prescribed preventative maintenance on machines as required per the P.M. charts. * Must be able to perform but not limited to the following tasks: milling, turning, drilling, taping, de-burring, molding and all bench operations and inspect. * Must be familiar with the basic machine functions in order to perform the tasks stated above. * Must be willing to accept and receive frequent supervision and assistance with regard to machine set-up. EDUCATION: * High School diploma or General Education Degree (GED) preferred. EXPERIENCE: * 0-3 years of factory-related experience. * Training in general safety, electrostatic discharge awareness, foreign object damage awareness and quality system awareness. KNOWLEDGE/SKILLS/ABILITIES: * Competence to read and comprehend simple instructions, short correspondence, and memos. * Ability to present information effectively one-on-one. * Good computer, math and reading skills needed. * Ability to apply common sense understanding to carry out instructions furnished in written, oral or diagram form. PHYSICAL AND ENVIRONMENTAL ELEMENTS: * While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. * The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. * The noise level in the work environment is usually moderate or loud. * The employee is regularly required to sit and talk or to hear. * The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. * The employee is occasionally required to stand and walk. * The employee must occasionally lift and/or move up to 25 pounds. * Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $18 to $20/hour RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #27.2-0/1

Consolidated Precision Products (CPP) in City of Industry is currently looking for a Rework Specialist to join our team! This role will be reporting to our Operation Supervisor on 1st Shift at our Aerospace Manufactory in City of Industry, CA. This is a great opportunity to join a growing company that has been in business for over 30 years! CPP offers a competitive compensation with heavy overtime opportunities, comprehensive benefits package which includes a quarterly bonus program, medical/dental/vision/life insurance, and 401k with employer match, paid vacation, sick time, and holidays. Hourly Rate: $20 - $21 DOE + Shift Differential ESSENTIAL JOB FUNCTIONS/DUTIES * Routes casting to the appropriate departments, based on the type of rework required * Maintains accurate files of rework travelers in a manner that provides for easy access and retrieval. * As required, tracks down and locates lost travelers and castings * Makes repairs to castings, as needed, to bring them into the specifications of our customers (e.g. grinding, blending, cutting, etc) * Reviews and makes any necessary changes on forms required for accurate record keeping. * Acquire additional certifications and credentials as required for work or career development * Ability to work overtime * Work on/participate in special projects as needed or assigned by Management QUALIFICATIONS * Education: High school diploma or equivalent preferred. * Experience: On the Job Training * Certifications/Licenses: N/A * Other Required Knowledge, Skills & Abilities: N/A Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: *********************** This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Consolidated Precision Products (CPP) is seeking a detail-oriented and strategic Assistant Controller to oversee financial operations within our aerospace division. This role is critical in ensuring compliance with industry regulations, managing cost accounting, and supporting executive decision-making through accurate financial reporting. This is a great opportunity to join a growing company that has been in business for over 30 years! CPP offers a competitive compensation with many overtime opportunities and a comprehensive benefits package which includes a quarterly bonus program, medical/dental/vision/life insurance and 401k with employer match, paid vacation, sick time and holidays. Salary Rate: $100K-$115K ESSENTIAL JOB FUNCTIONS/DUTIES Financial Close and Reporting * Review monthly accounting close process including journal entries, account reconciliations, and analytical review of the monthly operating results to ensure accurate accounting records are maintained * Implement, document, and maintain adequate and effective processes to improve the close and reporting cycles to ensure timely and accurate reporting * Responsible for meeting financial and tax reporting requirements to CPP Corporate, including consolidation and issuance of month-end reports and financial analysis * Responsible for maintaining daily financial reporting, and weekly KPI deliverables * Supporting weekly, monthly, and quarterly P&L and cash forecasting * Support the preparation of the annual budget Internal Controls and Compliance * Implement, document, and maintain strong internal controls * Ensure compliance with all CPP policies and procedures * Support internal and external audits Inventory * Manage cost accounting and inventory subledger, including annual overhead rate change, and part cost rolls * Lead physical inventories and analysis of inventory adjustments and reserves Manage Accounting Staff * Supervise the AR Specialist and AP support group. * Lead performance management and professional development of direct reports Operational Support * Provide operational guidance to improve efficiency * Present financial justifications for capital expenditures * Safeguard and oversee periodic physical inventories of fixed assets * Perform additional ad hoc duties as assigned REQUIRED SKILLS/ABILITIES: * Excellent analytical and organizational skills * Strong written and verbal communication skills * Proficiency in database and accounting systems EDUCATION AND EXPERIENCE * Bachelor's degree in finance, or Accounting required * 5+ years of progressive manufacturing accounting/finance experience, including supervisory responsibilities. * ERP system conversion experience a plus * Strong knowledge of US GAAP, cost accounting, and government contract compliance * Proficiency in ERP systems and advanced Excel skills Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ************************ Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. This is a management position This is a full time position

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: * Verifying part numbers with proper documentation placed on parts. * Determining customer packing requirements using the pink ticket and/or computer pack specifications. * Packaging products adequately to protect during transportation. * Printing and applying proper labels for identification. * Applying appropriate paperwork to close out the order. * Moving pallets or packages to shipment prep locations. * Loading/unloading trucks: raw material, finished goods, components, etc. * Performing daily cycle counts. * Packing/unpacking parts coming & going from outside vendors. Ensuring quantities, packing slips, & cert packages are correct. * Scheduling courier & freight pick-ups. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: * High School diploma or General Education Degree (GED) required. Experience: * 1-2 years shipping/receiving/warehouse experience preferred. * 1-2 years of experience working in a manufacturing/logistics environment. Knowledge/Skills/Abilities: * Good computer, math and reading skills required. * Excellent detail orientation and organizational skills required. * ERP experience preferred. * Manufacturing/warehouse experience preferred. Physical and Environmental Elements: * While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. * The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. * The noise level in the work environment is usually moderate or loud. * The employee is regularly required to sit and talk or to hear. * The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. * The employee is occasionally required to stand and walk. * The employee must occasionally lift and/or move up to 25 pounds. * Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $21 to $22/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #40.1-1

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries and our market capitalization is approximately $6.2 billion. Essential Functions of the Job: * Assist and support maintenance team * Perform inspections, cleaning, maintenance, and repairs of manufacturing equipment * Carry out repairs and maintenance of facility building and grounds * Operate and maintain a variety of hand, power, and pneumatic tools * Clean and prepare work areas and workstations for use by mechanics and other technicians * Document and upkeep of maintenance work orders * Perform other basic repairs and duties as assigned by the maintenance supervisor * Work with minimal to no supervision * Follow safe work practices and adhere to all safety rules and regulations * Complete forklift, scissor lift, and lockout tagout training The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. Education: * High school diploma or General Education Degree (GED) required. Experience: * 1-2 years related experience and/or training preferred. Knowledge/Skills/Abilities: * Proficient with hand, power, and pneumatic tools * Strong problem-solving skills to troubleshoot machinery * Exceptional organizational skills and great attention to detail * Ability to interpret maintenance instructions, manuals, safety rules, and other documents * Excellent time management skills to complete a variety of tasks * Good communication and teamwork skills * Ability to work in a fast-paced environment Physical & Environmental Factors: * While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. * The employee is occasionally exposed to moving mechanical parts, fumes, or airborne particles and toxic or caustic chemicals. * The noise level in the work environment is usually moderate or loud. * The employee is regularly required to sit and talk or to hear. * The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. * The employee is occasionally required to stand and walk. * The employee must occasionally lift and/or move up to 25 pounds. * Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a U.S. citizen, lawful permanent resident ["green card" holders] or have refugee or asylee status. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $25-29/hour. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #44.1-1

Consolidated Precision Products (CPP) in Rancho Cucamonga is currently looking for General Labor workers to join our team! This role will be reporting to our Operations Supervisor on 2nd Shift (1:30 PM - 10:00 PM) at our Aerospace Manufactory in Rancho Cucamonga, CA. This is a great opportunity to join a growing company that has been in business for over 30 years! CPP offers a competitive compensation with heavy overtime opportunities, comprehensive benefits package which includes a quarterly bonus program, medical/dental/vision/life insurance, and 401k with employer match, paid vacation, sick time, and holidays. Hourly Rate: $17 - $19 DOE + Shift Differential ESSENTIAL JOB FUNCTIONS/DUTIES * Examines and feels surface of workplace for defects. * Starts grinder and moves surface of workplace over to remove imperfections and excess material. * Operate a stand grinder to remove gates, risers, rough spots and other excess metals from a variety of castings in accordance with specifications. * The operator works with medium to large size castings. * Work is subject to inspection and check, with instructions given on new work or variations in requirements. * The work includes grinding to maintain contours, present smooth surfaces, etc. * The operator sorts, stacks and moves castings as directed. * Acquire additional certifications and credentials as required for work or career development * Work on/participate in special projects as needed or assigned by Management QUALIFICATIONS * Education: High school diploma or equivalent preferred * Experience: On the job training Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Applied Composites (AC) is seeking an Engineer 2, Manufacturing who will work within a multi-functional environment to support the manufacturing of mission critical aerospace hardware. The ME works to create tooling methodologies, develop new manufacturing processes, and solve composite manufacturing challenges. The Engineer must have a skilled understanding fiber-reinforced composite material processing, aerospace part manufacturing techniques, composites material performance characteristics, and the equipment used to manufacture and test composite parts. About AC: Come and join the Applied Composites team. We are a leading provider of complex composite components, assemblies, engineering and tooling to the aerospace, defense and space system markets. Our employees are treated with respect and given the support, knowledge, and resources they need to thrive. If you are looking for a company that values and develops its employees while offering engaging work, Applied Composites may be the place for you. Job Accountabilities: Develop manufacturing methods and processes, tooling details, and equipment specifications for current and new development programs Develop engineering Bill of Materials and estimate labor hours using historical data Work with company buyers to obtain raw material and specialty tooling necessary to complete the manufacturing tasks Creation and support of Manufacturing Readiness Review packages prior to first-part builds Develop manufacturing plans and detailed work instructions necessary for hardware fabrication Evaluate alternative composite materials and processes that improve component properties, reduce costs, and increase efficiency by performing trade studies and testing Oversee and contribute to engineering build projects from start to finish, ensuring that the project is executed on time Provide ongoing engineering assistance to the Operations department including troubleshooting of process operating problems, conducting special tests, developing reports, providing technical assistance, and aiding in design modifications Job Specifications: Education: Post-secondary degree or equivalent combination of relevant education and work experience that will allow successful performance of job expectations Years' Experience: 3-5 years of experience in an aerospace manufacturing environment Skills: Demonstrates competency in the processing of composite materials, including hand lay-up, vacuum bagging techniques, adhesive bonding, and assembly Ability to read and interpret customer specifications and 2D engineering drawings with an in-depth knowledge of GD&T; and the ability to interrogate 3D CAD models to extract all engineering requirements Experience with process development planning including deconstruction of all relevant engineering requirements, creating engineering bill of materials (BOMs), developing manufacturing process flows, identifying tooling solutions, and estimating labor hours through all phases of the manufacturing process Experience defining or designing tooling requirements for lay-up molds and mandrels, trim & drill fixtures, manufacturing aids, and specialty hand tools used in fabrication of complex composite structures. Strong Microsoft Excel user Excellent writing and communication skills with ability to create clear and succinct presentations and reports to communicate processes and project results with internal and external customers Ability to write clear and conforming work instructions Knowledge of standard aerospace industry specifications and practices Proficient in the manipulation of 3D part definition using CAD software Experience in development & optimization of composite flat patterns using FiberSim ply generation software is a plus Benefits: At Applied Composites, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, tuition reimbursement and other developmental opportunities. We are committed to supporting the way you live and work. AC is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Consolidated Precision Products (CPP Cudahy) is looking for motivated driven individuals to work in our sandcasting foundry in 2nd shift. This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 50 years! We specialize in manufacturing aluminum products for commercial, regional, corporate and military aircraft and engines. CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, 5% quarterly bonus potential and a great team culture! Check us out at *************** to learn more about our products and CPP Corporation. Apply to the position directly at ***************/careers Pay range: $19.00 - $23.00/hr DOE + 2nd shift differential ESSENTIAL JOB FUNCTIONS/DUTIES * Examines and feels surface of workplace for defects. * Starts grinder and moves surface of workplace over to remove imperfections and excess material. * Operate a stand grinder to remove gates, risers, rough spots and other excess metals from a variety of castings in accordance with specifications. * The operator works with medium to large size castings. * Work is subject to inspection and check, with instructions given on new work or variations in requirements. * The work includes grinding to maintain contours, present smooth surfaces, etc… * The operator sorts, stacks and moves castings as directed. * Acquire additional certifications and credentials as required for work or career development. * Maintain a clean, organized work area. * Comply with all safety, DOT, HAZMAT and environmental policies and procedures. * Ability to work overtime. Work on/participate in special projects as needed or assigned by Management Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. EOE/M/F/DISABLED/VETERANS This is a full time position

Consolidated Precision Products (CPP) is seeking a detail-oriented and strategic Accounting Manager to oversee financial operations within our CPP Rancho facility. This role is critical in ensuring compliance with industry regulations, managing cost accounting, and supporting executive decision-making through accurate financial reporting. This is a great opportunity to join a growing company that has been in business for over 30 years! CPP offers a competitive compensation with many overtime opportunities and a comprehensive benefits package which includes a quarterly bonus program, medical/dental/vision/life insurance and 401k with employer match, paid vacation, sick time and holidays. Salary Rate: $110K-$120K ESSENTIAL JOB FUNCTIONS/DUTIES Financial Close and Reporting * Review monthly accounting close process including journal entries, account reconciliations, and analytical review of the monthly operating results to ensure accurate accounting records are maintained * Implement, document, and maintain adequate and effective processes to improve the close and reporting cycles to ensure timely and accurate reporting * Responsible for meeting financial and tax reporting requirements to CPP Corporate, including consolidation and issuance of month-end reports and financial analysis * Responsible for maintaining daily financial reporting, and weekly KPI deliverables * Supporting weekly, monthly, and quarterly P&L and cash forecasting * Support the preparation of the annual budget Internal Controls and Compliance * Implement, document, and maintain strong internal controls * Ensure compliance with all CPP policies and procedures * Support internal and external audits Inventory * Manage cost accounting and inventory subledger, including annual overhead rate change, and part cost rolls * Lead physical inventories and analysis of inventory adjustments and reserves Manage Accounting Staff * Supervise the AR Specialist and AP support group. * Lead performance management and professional development of direct reports Operational Support * Provide operational guidance to improve efficiency * Present financial justifications for capital expenditures * Safeguard and oversee periodic physical inventories of fixed assets * Perform additional ad hoc duties as assigned REQUIRED SKILLS/ABILITIES: * Excellent analytical and organizational skills * Strong written and verbal communication skills * Proficiency in database and accounting systems EDUCATION AND EXPERIENCE * Bachelor's degree in finance, or Accounting required * 5+ years of progressive manufacturing accounting/finance experience, including supervisory responsibilities. * ERP system conversion experience a plus * Strong knowledge of US GAAP, cost accounting, and government contract compliance * Proficiency in ERP systems and advanced Excel skills Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ************************ Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. This is a management position This is a full time position

RBC Bearings Incorporated (NYSE: RBC/RBCP) is a leading international manufacturer of highly engineered precision bearings, components, and essential systems for the industrial, defense, and aerospace industries. Founded in 1919, the Company is primarily focused on producing highly technical and/or regulated bearing products and components requiring sophisticated design, testing, and manufacturing capabilities for the diversified industrial, aerospace, and defense markets. We currently have 56 facilities, of which 37 are manufacturing facilities in ten countries, and our market capitalization is approximately $6.2 billion. JOB TITLE/LOCATION: Quality Engineer (Product) - Santa Ana, CA DESCRIPTION: The Quality Engineer is responsible for ensuring quality of manufactured goods from delivery to final product by continually assessing process and recommending improvements. ESSENTIAL FUNCTIONS OF THE JOB: Primary responsibilities includes but not limited to: Product Review, Contract Review, Manufacturing router revie, special processes review, inspection (FAIR), and shipment release (Source, DSQR/DQR). Other supporting responsibilities to include: Quality Systems AS 9100, Internal Audits, Customer Audits, Corrective Actions, Continuous Improvement, performance reports and metrics, supplier management, and FOD program. AS13100 - MSA. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION and EXPERIENCE: HS Diploma/GED AND 5+ years of experience in Aerospace industry (mechanical). Or Bachelor's Degree in Mechanical Engineering, Industrial Engineering, or any other related field and minimum 3 years in Aerospace industry (mechanical). KNOWLEDGE/SKILLS/ABILITIES: * MSFT Office (Word, Excel, Outlook and PowerPoint) * Dimensional Inspection and GD&T * GAGE, R&R, SPC, PFMEA, PPAP * Experience with AS9100 systems. * Experience with internal audits, customer audits, and NADCAP audits. PHYSICAL AND ENVIRONMENTAL ELEMENTS: While performing the duties of this job, the employee generally works indoors within the office and manufacturing areas. The employee is occasionally exposed to moving mechanical parts, fumes or airborne particles and toxic or caustic chemicals. The noise level in the work environment is usually moderate or loud. Also, the employee is regularly required to sit and talk or to hear. The employee is frequently required to use hands to finger, handle, or feel and reach with hands and arms. The employee is occasionally required to stand and walk. The employee must occasionally lift and/or move up to 25 pounds. Specific vision abilities required by this job include close vision. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders], or have refugee or asylee status). Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Pay Range: $80,000 to $95,000/annual . At this time, we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws. Reference #46.1-0/1

CPP Cudahy is looking for motivated driven individuals to work in our sandcasting foundry in 2nd shift. This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 50 years! We specialize in manufacturing aluminum products for commercial, regional, corporate and military aircraft and engines. CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, and a great team culture! Pay range: $17.50 - $20.00/hr DOE + 2nd shift differential Foundry helpers perform general labor duties required in the foundry such as: * Supplies or holds materials or tools, transports material from one department to another. * Organizes parts, and/or tools * With training will set up and operates machinery utilized throughout the foundry (grinder, saw, forklift, etc.) consistent with established procedures and/or applications. * Loading or unloading furnaces * Assist with pouring and regulating the flow of molten metal into molds and forms to produce castings. * Transport materials and products to and from work areas, manually or using carts, hand trucks, lift trucks, hoists, etc.. Requirements: * Mechanically inclined. * Demonstrated ability to work in a team environment. * Manufacturing/production operation experience desired * HS diploma or equivalent GED required, but candidates not meeting this requirement who possesses relevant experience will be considered. * Must be able to work overtime and weekends * Able to lift 10-40 lbs Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ************************ Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. * This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. * CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. * Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. This is a non-management position This is a full time position

Consolidated Precision Products (CPP Cudahy) is looking for motivated driven individual to work in our Sandcasting foundry. The Straightener will be reporting to our Operations Supervisor on 1st Shift (4am - 12:30pm) at our Aerospace Manufactory in Cudahy, CA. This is a great opportunity to join a growth-oriented company within the aerospace industry that has been in business for over 50 years! We specialize in manufacturing aluminum products for commercial, regional, corporate and military aircraft and engines. CPP offers a competitive compensation and benefits package, which includes a bonus program, medical/dental/vision/life/disability insurance, 401K with match, paid vacation and holidays, paid training, 5% quarterly bonus potential and a great team culture! Check us out at *************** to learn more about our products and CPP Corporation. Apply to the position directly at ***************/careers Pay range: $19.00 - $23.00/hr DOE Job Summary To straighten and/or qualify the less complex, complicated castings, under available supervision, including units typically other than samples and prototypes consistent with established and accepted standards of quality and quantity. Major Responsibilities * Organize castings, fixtures, gauges, materials, documentation, and hand/power tools necessary to complete assigned jobs and checks all documentation (travelers, special instructions, etc.) to help ensure the best possible results * Position and straightens castings using hand or power tools, including visual and dimensional inspection and reference to travelers and/or work instructions to ensure conformance with provided specifications. * Set up and operates power presses or special equipment in the positioning, adjusting, and alignment of castings * Perform qualifying operation on castings as required, by aligning them within tolerance of qualifying/target fixture. * Performs combination straighten and qualify operation on castings and determines when each is applicable. (Whether to straighten or qualify.) * Scribe casting dimension lines on casting as may be required using scribing fixture. * Inspect completed work and performs rework or additional adjustments as required to ensure compliance with established specifications. * Acquire additional certifications and credentials as required for work or career development * Maintain a clean, organized work area * Comply with all safety, DOT, HAZMAT and environmental policies and procedures * Ability to work overtime * Attendance * Work on/participate in special projects as needed or assigned by Management About You * Education: High school diploma or equivalent preferred. * Experience: N/A Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: http://***************/ This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. * Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. EOE/M/F/DISABLED/VETERANS This is a non-management position This is a full time position

Roles and Responsibilities: * Use power and hand tools to perform repair and maintenance work. * Services equipment by oiling, greasing, and coolants as required. * Operate forklift and other basic loading and unloading equipment as required, to move machine chips, and hazardous material. Required Job Knowledge, Skills and Experience: * Ability to perform physical tasks involving bending, squatting, standing for extended periods of time, pushing, reaching and some lifting. * Committed to quality service. * Displays a high level of initiative, effort and commitment towards completing assignments efficiently. Works with minimal supervision. Demonstrates responsible behavior and attention to detail. * Must be willing to work overtime, weekends and Holidays. * Ability to fluently read, work and follow instructions in English. * Possess a Class C, California Driver's License. * Maintain good driver safety record. (Must provide DMV record annually). * Must be a U.S. Citizen * Attendance and punctuality at work are essential functions of this position. Preferred Job Knowledge, Skills and Experience: * Four years of general maintenance and repair. Experience on CNC lathe and mills or equivalent combination of experience will be considered. * High School Diploma or equivalent. * Good communication skills. * Good numerical and reasoning ability. * Ability to organize tasks and work with others. Please note that this job description is not exhaustive. Management reserves the right to add, modify, change, or rescind work assignments or different positions and to make reasonable adjustments to ensure qualified employees can perform the essential functions of the job. Equal Opportunity Employer: Western Precision Aero is an Equal Opportunity Employer and all employees of RBC are subject to E-Verity. Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained.

Applied Composites (AC) is seeking a Metrology Inspector . In this position you will be responsible for metrology solutions in an aerospace manufacturing environment. Provide metrology solutions including but not limited to: laser tracker/ PCMM inspections, machine alignments, reverse engineering, tool building and assembly, software and hardware training. Generate inspection reports to customer specifications. This includes Drawing Based inspection reports, First Article Inspection Reports, Model Based Definition inspection reports, and Dimensional inspection reports. About AC: Come and join the Applied Composites team. We are a leading provider of complex composite components, assemblies, engineering and tooling to the aerospace, defense and space system markets. Our employees are treated with respect and given the support, knowledge, and resources they need to thrive. If you are looking for a company that values and develops its employees while offering engaging work, Applied Composites may be the place for you. Job Accountabilities: Provide metrology solutions including but not limited to: laser tracker/ PCMM inspections, machine alignments, reverse engineering, tool building and assembly, software and hardware training. Generate inspection reports to customer specifications. This includes Drawing Based inspection reports, First Article Inspection Reports, Model Based Definition inspection reports, and Dimensional inspection reports. Maintain equipment by performing field calibrations and verifying manufacturers maximum performance errors. Maintain equipment's cleanliness using manufacturers specifications. Function as a subject-matter expert and assist in recommending solutions for customers applications. Provide technical & non-technical guidance to team members to foster career & personal development. Manage budgets Preparing detailed technical specifications for quotations Job Specifications: Education: A Secondary Certificate/High School Diploma or equivalent combination of relevant education and work experience that will allow successful performance of job expectations Years' Experience: 3-5 years or more of relevant experience Skills: Accountability Excellent 3D analytical skills Excellent interpersonal skills Excellent communications skills, both written and oral Attention to detail Ability to make effective decisions and presentations on complex manufacturing topics to technicians, engineers, managers and executives Benefits: At Applied Composites, we recognize how important your career and benefits are to you and your family. We offer a full suite of benefits including medical, dental, vision, short and long-term disability coverage, accident insurance, critical illness insurance, basic and supplemental life insurance, employee assistance plan, retirement savings and matching, tuition reimbursement and other developmental opportunities. We are committed to supporting the way you live and work. AC is an Equal Opportunity Employer Veterans/Disabled - Affirmative Action Employer. This position requires the use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.

Consolidated Precision Products (CPP), a manufacturer of highly complex aerospace castings is seeking a Welder to join the team at our plant in the City of Industry, CA location. We are looking for a motivated and driven individual that can drive execution in a diverse, challenging environment. Salary: $25.00 - $30.00 DOE and passing CPP Weld Test. ESSENTIAL JOB FUNCTIONS/DUTIES * Ability to weld by method of GTAW for rework, repair and cosmetic upgrade in accordance with customer specifications and internal procedures. * Evaluate castings to ensure preparation from prior operation is adequate. * Assess the condition of the castings to determine weld technique. * Perform additional weld preparation with the use of die and belt grinders. * Operate and maintain welding machines and equipment. * Ability to document weld locations and dimensions. Qualifications: * Education: High School Diploma or General Education Degree (GED); Weld Test Meets AWS D17.1 with weld thickness * Experience: Formal training or classes a plus. * Certifications/Licenses: Must successfully complete CPP ISO Procedures: Manufacturing 500, 501 and 502. Obtain and maintain NADCAP certifications on all assigned alloys (stainless steel and Aluminum). * Other Required Knowledge, Skills & Abilities: LANGUAGE SKILLS - Ability to read, understand and comprehend documents such as safety rules, operating and maintenance instructions, simple drawings, procedure manuals and Internal Method Sheets (IMS). * Ability to speak effectively and interact with other team members, engineers and leadership. MATHEMATICAL SKILLS - Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to deal with problems involving several concrete variables in standardized situations. REASONING ABILITY - Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Sponsorship is not available for this role. Candidates must be legally authorized to work in the US on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. It is the policy of CPP Corporation to cooperate to the fullest extent with the applicable regulations of the Civil Rights Act and any legislation on Equal Employment Opportunity. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. EOE/M/F/DISABLED/VETERANS This is a full time position

Consolidated Precision Products (CPP) is currently looking for an Penetrant Level II on 2nd Shift to join our Rancho Cucamonga team! They will be reporting to our NDT Supervisor at our aerospace foundry in Rancho Cucamonga, CA. This is a great opportunity to join a growing company that has been in business for over 30 years! CPP offers a competitive compensation with many overtime opportunities and a comprehensive benefits package which includes a quarterly bonus program, medical/dental/vision/life insurance and 401k with employer match, paid vacation, sick time and holidays. Pay Range: $24 - $29 DOE Plus $1 Shift Differential ESSENTIAL JOB FUNCTIONS/DUTIES * Per NAS 410, Penetrant Level II personnel certified to this standard shall be recertified at intervals not to exceed five years. Recertification shall be accomplished by successful completion of practical and specific examinations equivalent to those required for initial certification. * Set up standardized equipment, process parts, interpret and evaluate for acceptance or rejection, and document results. * Be thoroughly familiar with the scope and limitations of the technique/method. * Have the skills and knowledge to conduct system performance checks in accordance with the applicable process standard. * Be capable of providing the necessary guidance and/or supervision to trainees and Level 1 personnel. * Be familiar with the codes, standards, and other contractual documents that control the method as used by the employer. * When specified in the written practice, be capable of developing work instructions from approved general procedures. Such work instructions shall require final approval by a Penetrant Level 3 certified in the method. * Have basic knowledge of relevant product manufacturing and inspection technology. * To perform the Penetrant Level II job successfully, an individual must be able to perform each essential responsibility satisfactorily. These requirements are representative, but not all - inclusive, of the knowledge, skill, and ability required of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. QUALIFICATIONS * Education: High school diploma or general education degree (GED) * Experience: 5+ years * Certifications/Licenses: NAS 410 - One or more NDT Methods * Other Required Knowledge, Skills & Abilities: Consolidated Precision Products (CPP) is an industry-leading manufacturer of highly engineered components and sub-assemblies, supplying the commercial aerospace, military and industrial markets with small-to-large "function critical" products. CPP provides its customers with a "total solution" source, taking them from concept to finished product with one of the broadest and most diverse product offerings in the industry. More information about our company can be found at: ************************ Sponsorship is not available for this role. Candidates must be legally authorized to work in the U.S. on a permanent and consistent basis without company sponsorship now and in the future. This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee. CPP Corporation is an Equal Opportunity Employer that recruits, hires, trains, and promotes employees in all job classifications without regard to race, color, religion, age, sex, sexual orientation, gender identity, marital status, national origin, disability, veteran's status, or other legally protected status. Qualified applicants with arrest or conviction records will be considered for employment in accordance with the Los Angeles County Fair Chance Ordinance and the California Fair Chance Act. This is a non-management position This is a full time position

JOB TITLE/LOCATION: Quality Inspector II - Baldwin Park, CA ESSENTIAL FUNCTIONS OF THE JOB: * Inspect products using inspection gauges at various inspection points throughout product lifecycle * Generate spreadsheets for data collection. * Reconcile final inspection documentation for shipments. * Interact with source inspector as needed. * Test incoming raw materials. * Perform regular quality assessments on all incoming materials from vendors and outgoing products for shipping. * Reject all products and materials that fail to meet quality expectations. * Read blueprints, plans, and specifications to understand the requirements of products and services. * Measure product dimensions, examine functionality and compare the final product to the specifications. * Recommend improvements to the production process to ensure quality control. * Document inspection outcomes by completing detailed reports and performance records. * Teach the production team about quality control concerns to improve product excellence. * Supervise the production process. * Resolve quality-related issues in a timely manner. The preceding functions have been provided as examples of the types of work performed by employees assigned to this job function. Management reserves the right to add, modify, change or rescind the work assignments of different positions and to make reasonable accommodations so that qualified employees can perform the essential functions of the job. EDUCATION: High School diploma or General Education Degree (GED) preferred. EXPERIENCE: 3+ years performing inspection of assemblies (e.g. performs first article and in process inspection, verifies standard and pre-set gauging, performs first article & in-process inspection) KNOWLEDGE/SKILLS/ABILITIES: * Excellent knowledge of MS Office. * Good math and technical skills. * Strong understanding of quality control standards and testing techniques. * Strong written and oral communications skills * Practical experience in precision inspection equipment and calibration * Knowledge in aerospace materials This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be a U.S. Person which is defined as a U.S. citizen, a lawful permanent resident ["green card" holders], U.S. National, Refugee, or Asylee. Please note that the salary range information is only applicable for California. The pay range represents the low and high end of the salary range we reasonably expect to pay for this position at the time of posting. An employee's pay position within the salary range will be based on several factors, including, but not limited to, geographic location, experience, education, skills, qualifications, performance, and business or organizational needs. Salary Range: $24-26 hourly. Relocation assistance not available and we are only considering local candidates. RBC Bearings is an Equal Opportunity Employer to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws

Sonic Industries, Inc. is a leading aerospace fastener company. RBC Bearings is a well-known international manufacturer and marketer of highly engineered precision plain, roller and ball bearings. We have been providing bearing solutions to our customers since 1919. Sonic Industries has an immediate opening for a Manufacturing Engineer Trainee. The Manufacturing Engineer Trainee utilizes a wide range of knowledge and skills to participate in Quality Engineering and Continuous Improvement projects and programs. Key Position Responsibilities: The duties and responsibilities include, but are not limited to, the following and must be performed with limited supervision: * QE support of Prime Customers for first articles and corrective action; * Reviewing contracts, specifications, purchase orders, and planning; * Planning and implementing quality initiatives throughout the organization; * Managing & tracking MRB & RMA's; * Performing internal & external audits; * Participating in RCCA investigations as required; * Assist in supplier quality support and development. * Implement and Manage QMS software Individual must have: * Have a Bachelor's Degree in Mechanical, Material or Manufacturing Engineering or related field. * Be an individual who is a self-starter, motivated and resourceful, in addition to being detail oriented and possess a good work ethic. * Be able to communicate with all levels of the organization, both verbally and in writing. * Have a positive attitude and a desire to learn. ITAR Requirement: Due to ITAR regulations, this position requires that the employee must be a U.S. Person (U.S. Citizen or Permanent Resident) or a Foreign Person for whom a license is obtained. Quality Requirement: Employees will participate as required in understanding, implementing and maintaining the Company Quality Policy in accordance with AS-9100D and/or ISO-9001:2015 requirements. Employer's Statement: This does not list all of the duties of the job. You may be asked by supervisors or managers to perform other duties. You will be evaluated in part based upon your performance of the tasks listed in this . The company reserves the right to change, rescind, add or delete the duties and responsibilities of positions within this job classification at any time. The job description is not a contract for employment, and either you or the employer may terminate employment at any time, for any reason. We offer competitive compensation and excellent benefits including Medical, Dental, and a company matched 401k plan. RBC Sonic Industries, Inc. Sonic is an Equal Opportunity Employer m/f/d/v

We are seeking an experienced CNC Machinist to join our dynamic aerospace manufacturing team. The ideal candidate will have a strong background in operating and setting up CNC mills (vertical, horizontal, 5-axis) and lathes, with a deep understanding of precision machining and quality standards, on 2nd shift. Responsibilities: * Operate and set up CNC mills (vertical, horizontal, 5-axis) and CNC lathes. * Read and interpret blueprints, technical drawings, and work orders to determine machining requirements. * Select appropriate tools, fixtures, and materials for each job. * Monitor machining operations to ensure parts meet specifications and quality standards. * Measure, mark, and verify dimensions of finished parts using precision instruments (micrometers, calipers, gauges, etc.). * Adjust machine settings, tool offsets, and feeds/speeds to optimize accuracy and efficiency. * Maintain equipment in proper working order and ensure a clean, organized work environment. * Record production data, job progress, and inspection results accurately. * Collaborate with engineers, programmers, and inspectors to resolve machining or design issues. * Safely lift and move materials as required. Qualifications: * Minimum 5 years' experience in aerospace manufacturing or a related industry. * Familiarity with inspection processes and basic quality standards. * Strong organizational and time management skills. * Ability to follow written and verbal instructions accurately. * Commitment to safety protocols and workplace cleanliness. * Effective team player with the ability to work independently when needed. Overtime may be required, including weekends. Interested candidates can also submit their resumes to ************************** MIN: $25.000 to $30.00 Please note that the salary range information is only applicable to California. This range is the company's good faith and reasonable estimate of the compensation for this role based on the position's responsibilities, qualifications, experience, and other relevant factors. Actual compensation may vary depending on the selected candidate's specific experience, education, skills, and other relevant factors. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities: Western Precision Aero., LLC is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, sexual orientation, gender identity, national origin, disability, or veteran status. This role is subject to compliance with the International Traffic in Arms Regulations (ITAR) and the Export Administration Regulations (EAR), which requires the incumbent to be either a US citizen, lawful permanent resident ["green card" holders] or have refugee or asylee status.