Research and development engineer jobs in Abilene, TX - 47 jobs

Division: Dallas Main Minimum Years Experience: 4 Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Bachelors DegreeJob Family:ConstructionCompensation:Salaried Exempt Position Description: Manage, evaluate, and assess information related to Mechanical and Electrical systems necessary to construct the project on time in a safe manner, within budget, and to the quality specified by the contract documents. Essential Duties & Responsibilities: Specifically relating to the mechanical and electrical systems: * Lead the Turner project team, subcontractors, owner's consultants and representatives to ensure optimal alignment and efficient systems installation. * Prepare and manage the contract item's list for all components, materials, and systems to ensure that all ROJ dates are in compliance with the project schedule with the appropriate approval status. * Participate in schedule update meetings and provide the latest information for an informed and accurate schedule. * Evaluate and manage the processing of RFI's. * Manage the budget including the review, evaluation, and negotiation of all change orders with understanding of the financial status of all subcontractors. * Supervise, coach and mentor Assistant MEP Engineers. * Co-lead the MEP Coordination Process with the VDC Engineer, ensuring overall installation is in compliance with the design requirements, operations and maintenance fundamentals, and quality standards. * Prepare scope of work documents with a division of responsibility for trades and specific scopes of work for temporary operations. * Partner with the MEP Superintendent to resolve conflicts between the mechanical and electrical systems with the site logistics plan and in compliance with the project schedule. * Co-lead with the MEP Superintendent the overall turnover process including start-up, testing, commissioning and closeout. * Conduct regular project walkthroughs with the MEP staff to ensure that work is proceeding in accordance with the contract documents, coordination drawings, and approved submittals. * Identify and inform field staff of difficult installation requirements in sufficient time to allow for proper planning and execution. * Manage and secure all municipal and agency documentation required for temporary certificates of information and system operation. * Create and implement the quality control plan with the MEP Superintendent. Qualifications: Bachelor's Degree in Engineering and a minimum of four years of relevant engineering experience or an equivalent combination of education, training, and/or experience relating to mechanical and electrical systems. Technical expertise and understanding of all mechanical and electrical systems that support the broad array of project types in our portfolio and how they interrelate with each other. Business acumen to plan, manage, and execute all the essential duties with excellent verbal and written communication skills, organizational ability, and proficiency with computer applications. Demonstrate the personal attributes of a leader to encourage the development of a high performing team. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 lbs. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. * May perform other duties as assigned. Where applicable, all activities will include disabled and veterans' organizations. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

Insight Global's top data client is seeking a Mechanical Engineer who will be responsible in reading and interpreting mechanical, plumbing, electrical and controls schematics and diagrams. Experience in bidding, designing, building, operating and commissioning of mechanical systems. This person will be responsible in mechanical construction and the processes required for a proper installation. Pay rate: $55-60/hr, dependent on experience We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements 7-10 years' experience as a Mechanical Engineer Hyperscale data center or mission critical (gas & oil, power plant, etc.) experience Experience with mechanical systems: piping, sheet metal, cooling towers, ducts, chillers Construction background Bim 360 experience or similar software

Onsite Mechanical Engineer - Liquid Cooling SME - Critical Facilities - Impact, TX This opportunity is working onsite at a HPC / Hyperscale Data Center Facility. This firm provides data center solutions custom-fit to the requirements of their client's mission-critical operational facilities. They provide reliability of mission-critical facilities for many of the world's largest organizations (Enterprise and Hyperscale Customers). This role offers exciting projects that incorporate cutting-edge liquid cooling, HVAC, and mechanical infrastructure technologies. Our client is seeking an Onsite Mechanical Engineer to act as a Subject Matter Expert / SME in liquid cooling at the rack level for Hyperscale client onsite at a the Customer's Data Center. They will provide onsite design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, and sustainable design when providing these consulting services. This career-growth minded opportunity offers leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience with Mechanical , HVAC and Controls Systems specifically for large data centers / Hyperscale. They will have experience and in-depth knowledge of HVAC / Mechanical / Controls System design, installation, commissioning and operations. This role will support ongoing facility operations, upgrades, and infrastructure deployments with a strong focus on HVAC, liquid cooling at Rack and Server, piping and other mechanical systems used in hyperscale / HPC data center environments. Responsibilities: Oversee projects, assist with design- plans, provide and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for large sized data center facility design projects Serve as the mechanical subject matter expert onsite in meetings and throughout engineering, commissioning, and go live Assist with Conceptual Designs gathered from meetings with the client and translate to field-level execution Support data center operations with design upgrades, retrofits, and equipment assessments for mechanical and cooling systems Review mechanical design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to engineering design and commissioning Work with Management to create / respond to RFPs Represent the company in: commissioning, design, construction and coordination meetings Participate in onsite commissioning efforts including HVAC systems, chilled water systems, CRAHs, cooling towers, and liquid cooling infrastructure Understand functional tests for various systems, such as: HVAC / Mechanical Systems, Controls, etc. Interface with clients, contractors, equipment vendors and owners agents and internal stakeholders as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, when requested Write comprehensive technical reports when needed which including system analysis, deficiency lists, and O&M documentation in addition to: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals Troubleshoot HVAC and cooling systems in the field; identify and resolve equipment performance issues Assist with quality control processes and mechanical system validation procedures Qualifications: 5-10 years of experience in Mechanical systems, HVAC, or liquid cooling infrastructure for critical facilities or data centers Bachelor's Degree in Mechanical Engineering or similar engineering degree a plus Licensed PE / EIT a Plus Experience with AutoCAD for minor tweaks for any design plans a plus Previous experience using: Revit MEP projects, BIM a plus Experience with Mechanical Systems ( HVAC , Liquid Cooling, Manifolds, Cooling Towers, CFD ( Fluid Dynamics), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ) Familiarity with mechanical equipment testing, balancing, equipment sizing, calculations, and commissioning in high-uptime data center facilities Previous Data Center / Mission Critical experience a must Ability to successfully work independently Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction) Self Starter, self motivated, and should prioritize well Previous experience in the Military / Military Veterans a huge plus! Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force - Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc. Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: ************************************** After applying, if you have further questions, you may call ************ and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, *************************** If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: * Under close supervision of higher level technicians or staff professionals, assist on tasks and perform basic testing and observations duties. * Provides clear documentation of findings and results. * Communicates information to Project Manager and discusses accuracy of data in preparation for submittal. * Submits documentation and communicates results as directed by the Project Manager * Will be placed in a progressively increased role of training and responsibility in work assignments. * Maintains assigned equipment. * Drive a vehicle such as a Ford F-150 or equivalent. * Follow safety rules and practices and other safety requirements for all projects. Perform pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Requirements: * High school diploma or equivalent * 6 months experience required. * Valid driver's license with acceptable violation history. Preferred Certification: * Obtain Nuclear Density Gauge certification within 6 months of hire. Required Certification: * Obtain ACI certification within 90 days of hire. * Successful completion of related internal safety certifications. About Terracon Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in environmental, facilities, geotechnical, and materials services. Terracon's growth is due to our talented employee-owners exceeding expectations in client service and growing their careers with new and exciting opportunities in the marketplace. Terracon's vision of "Together, we are best at people" is demonstrated through our excellent compensation and benefits package. Based on eligibility, role and job status, we offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. EEO Statement Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Smiths Interconnect is a leading provider of high reliability connectivity products and solutions serving segments of aerospace and defense, medical, semiconductor test, and industrial markets. It designs and manufactures technically differentiated electronic components, microwave, optical and radio frequency products and sub-systems that connect, protect and control critical applications. Smiths Interconnect is part of Smiths Group plc and has 21 Sales, R&D and Manufacturing locations in 12 countries, including Canada, US (Florida, Texas, Kansas, and Maryland), Mexico, Costa Rica, France, Germany, Italy, UK, Tunisia, India, China, and Singapore Job Description Ready to embark on an engineering adventure? As our Product Development Engineer, you'll: * Be the wizard behind the curtain, conjuring up new products and giving existing ones a magical makeover to delight our customers! * Channel your inner Picasso to craft product design guidelines and customer standards that are true works of art. * Don your superhero cape and swoop in to provide technical support to our organizational sidekicks and external allies. * Join forces with cross-functional Avengers to map out epic product and technology quests. * Transform into a master storyteller, weaving technical tales in proposals and presentations that will leave our customers spellbound. * Put on your detective hat and conduct thrilling patent investigations, then pen technical documents worthy of a bestseller. * Be the Sherlock Holmes of product-related mysteries, cracking cases and presenting brilliant solutions to the Engineering Manager or Director. * Become a components whisperer, communicating with suppliers about specifications, manufacturing techniques, and materials that are so cutting-edge, they're practically from the future. * Embrace your inner safety guru and participate in all EHS programs with the enthusiasm of a kid in a candy store. * Be a Jedi master to your Padawans, mentoring junior-level technologists in the ways of the Engineering Force. * Show off your company spirit by demonstrating behaviors so consistent with policies, you could win "Employee of the Millennium." * Be ready to tackle any mission that comes your way - because in this role, the only constant is fun! Qualifications Are you ready to join our league of extraordinary engineers? Here's what you'll need in your utility belt: * A shiny Bachelor's degree in Mechanical, Mechatronics, or Electromechanical Engineering (or an equally impressive equivalent). No time travelers from the future, please! * 2-4 years of post-graduate experience. That's like 730-1460 days of leveling up your engineering skills! * English communication skills so excellent, you could explain quantum mechanics to a golden retriever. (We'll test this superpower in your interview!) * SolidWorks 3D modeling skills that would make Tony Stark jealous. Bonus points if you can recite GD&T and ANSI/ASME standards in your sleep! * A brain packed with knowledge of engineering mechanics, material properties, physics, and manufacturing methods. Think "Big Bang Theory" level of nerdiness, but cooler. * Electrical theory know-how that would impress Tesla himself, especially in signal transmission, characterization, and signal integrity. * The ability to see through walls... well, not really, but you should understand how mechanical designs affect electrical functions/performance. * Six Sigma skills so sharp, you could cut through red tape with them. FMEA experience is like having an extra superpower! * Finite Element Analysis skills (structural, thermal & fluid) that would make you the life of any engineering party. * EM and RF simulation experience that's out of this world. Literally, it could help us communicate with aliens (okay, maybe not, but it's still awesome). * IC test socket or electrical connector design experience? That's like finding the cherry on top of your already impressive sundae of skills! * Patent experience is the secret sauce that could take you from superhero to legend status. * Attention to detail so intense, you could spot a needle in a haystack... while blindfolded... on a rollercoaster. * Problem-solving skills worthy of Sherlock Holmes, with a data-driven approach that would make even Watson jealous. * Microsoft Office skills so slick, you could create a PowerPoint presentation in your sleep (but please don't, we value work-life balance). * A willingness to travel 0-20% of the time. Think of it as occasional field trips for grown-ups! * If you're a US citizen or permanent resident, that's great! If not, no worries - we're equal opportunity awesome-seekers. Remember, in this role, the only constant is fun! So bring your A-game, your sense of humor, and maybe a cape (optional, but highly encouraged). Let's make engineering magic together! Additional Information We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

Job Level: Entry Level Home District/Group: Kiewit Equipment Services Department: Equipment Market: Power Employment Type: Full Time As an Entry Level Equipment Engineer, you will support Regional Construction & Mining operations. This position is responsible for the planning, scheduling, budgeting, utilization and reliability of a construction and mining equipment fleet. The position will deal with day to day as well as long term issues related to an equipment fleet. The position's main focus will be to improve equipment reliability as well as implement, monitor, audit, and manage preventative maintenance programs. For this role, the start date is immediate. District Overview Kiewit Equipment Services (KES) helps to ensure the profitability of Kiewit projects through the improved equipment utilization and mechanical reliability by delivering world-class equipment and service. Location One of the many things that makes Kiewit's culture unique is that we go where the work is, which exposes your career to abundant opportunities. We relocate our teams based on the work that is available, combined with the development plans, skill sets and career goals of each team member. This means your Kiewit adventure is custom-designed to meet our shared needs. Responsibilities * Understand and comply with all federal, state, and company health, safety, and environmental requirements * Material handling and procurement * Create and maintain tool/filter lists and documentation * Inspections of equipment and parts * Logistics management and communication * Long/short range equipment planning, scheduling, and budgeting * Planning and paperwork processing to prepare for critical lifts * Use reliability and failure analysis data to increase equipment availability and reliability * Establish and maintain communications between all levels of supervision and management * Support of craft maintenance technicians - ordering parts, manage inventory, schedule crews, and manage quality and safety * Specialty projects as needed Qualifications * Has obtained an undergraduate AS/ BS degree in Diesel/Automotive Technology, Heavy Equipment Technology, Mechanical Engineering Technology, Construction Management * 1+ year of experience with equipment is preferred * 1+ year of experience with equipment planning, scheduling, and budgeting is preferred * Strong work ethic - Willing to do what it takes to get the job done * Strong organizational, time management and communication skills * Strong attention to detail and ability to focus on multiple projects at once while prioritizing tasks * Willingness to travel and relocate as required * Willingness to work in both office and field environments * Knowledge of CAD modeling programs is preferred * Ability to freely access all points of a construction site or equipment yard in wide-ranging climates and environment #LI-JT1 Other Requirements: * Regular, reliable attendance * Work productively and meet deadlines timely * Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. * Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. * Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. * May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status.

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary We are seeking an outstanding Engineer to join the Product Operations team to help start up one of the most advanced manufacturing facilities in US. This pivotal role serves as the internal command center that drives successful real-time operations & shipments by identifying critical paths for production, anticipating gaps, & driving results through cross team collaboration. With an eye towards efficiency & sustainability, the engineer drives initiatives that create or refine workflows, ensuring successful operations that adapt to changes in the evolving semiconductor industry. Role and Responsibilities Here's What You'll Be Responsible For: * Assume ownership of Logistic Equipment, or supply chain role depending on factory needs. * Coordinate preventive maintenance and software upgrades with third party vendors to keep tools consistently up to date and fully operational. * Diagnose & communicate tool related problems, coordinating with vendors and contractors as needed to restore operations after downtime. * Work with engineering, shift operation, and quality teams to identify tactical issues, resolve critical incidents, & author, implement, and maintain SOPs for each ownership domain. * Partner with systems technology and engineering teams to design & demonstrate the improvements to enhance equipment & factory flow. * Effectively communicate at all levels to champion lean manufacturing initiatives that enhance factory efficiency. * Develop & deploy new tools than refine existing processes & lead training to ensure seamless integration into standard workflows. Skills and Qualifications Here's what you'll need: * Bachelor's degree or equivalent in Engineering & Applied Mathematics. * 3+ years' experience in lean manufacturing, six sigma, factory operations, capacity planning, or project management. * Proficiency in Microsoft Office: Excel, PowerPoint, Word. * Experience with Equipment troubleshooting preferred. * Experience with Automated Manufacturing or Semiconductor FAB a plus. * Consistent track record of driving successful cross functional projects in a fast-paced environment with competing priorities. * Ability to anticipate problems, design preventative solution, & use persuasive communication to secure stakeholder buy-in. The current base salary range for this role is between $70,480 - $179,090. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: * Medical, dental, and vision insurance * Life insurance and 401(k) matching with immediate vesting * Onsite café(s) and workout facilities * Paid maternity and paternity leave * Paid time off (PTO) + 2 personal holidays and 10 regular holidays * Wellness incentives and MORE Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance. All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. * Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here. * Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.

DPR Construction is seeking a senior project engineer with a minimum of 5 years of commercial construction experience. Project engineer responsibilities will be on commercial projects within our core markets: advanced technology, commercial, healthcare, higher education and life sciences. Project engineers will work closely with all members of the project team and will be responsible for the following: Participation and application of DPR's environmental health and safety plan to constantly maintain injury-free environments including performing weekly safety audits. Mentor, develop and train team members for fast-paced growth. Management of other project engineer team members. Understanding and enforcement of contracts, including between DPR and subcontractors as well as DPR and the owner. Assist superintendent and project manager in the implementation of DPR policies and the execution of the project. Organizing the duties of other engineers, field office coordinator, project accountant and other assigned project staff. This includes providing direction, prioritization, and performance feedback. Participation in trainings and company meetings to facilitate individual and company growth. Organizing and electronically archiving project files for easy access by the project team. Preparation, monitoring, and updating project schedules. Working with the superintendent to impact the schedule with project constraints. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Identifying, assembling, negotiating, and distributing change orders to both the owner and subcontractors. Preparing agendas, documents, meeting minutes, and actions for various meetings including owner/architect/contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. Participating in project cost control. This includes maintaining internal records and working with subcontractors to make sure changes are getting paid. Preparing owner billing by assembling DPR costs, receiving and reviewing subcontractor invoices and organizing the documents in accordance with the owner's requirements. Qualifications We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Organized work approach with the ability to adapt and adjust as required to support the projects' current needs. Detailed knowledge of the assigned project scopes with a 100% hands-on approach. A desire to seek out and resolve construction problems/conflicts that arise during design and construction phases. Goal-orientated approach to promptly coordinate and resolve project issues within the project team (including interfacing with designers, engineers, and owners). Excellent listening and strong communication skills. Ability to identify and resolve complex issues. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar) and BIM software (AutoCAD, Revit, Navisworks or similar). 5+ years of experience as a project engineer, preferably within DPR's core markets. Bachelor's degree in construction management, civil engineering or related field. A strong work ethic, a “can-do” attitude and a passion for construction. This position is salaried. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

This position will collaborate with team members to primarily design projects that support master-planned communities (such as single-family residential sections, commercial sites, utility extensions, mass grading, drainage/detention facilities or improvements, existing or proposed roadway improvements, etc.). Technical tasks include but not limited to utility design (primarily water, sanitary sewer, and storm sewer), roadway design, grading design, drainage design, plan production support, plan submittal/approval coordination, conceptual analyses/exhibits, cost estimations, and quantity take-offs. Accountability and Duties: Designs construction plans utilizing AutoCAD Civil 3D. Follows QA/QC procedures for design and plan production milestones. Monitors scopes, budgets, and schedules of assigned projects. Assists project managers and/or other project teams as requested. Requirements Requirements Minimum Qualifications Bachelor's degree in engineering from an accredited four-year college or university. 0-2 years related experience. Certificates, Licenses, Registrations: Valid driver's license EIT Certification (Preferred) Required Knowledge, Skills, and Abilities: Outstanding Interpersonal skills, ability to interact with a variety of people. Adaptable and able to respond quickly and accurately under pressure. Able to manage tasks/responsibilities in a fast-paced environment. Must be fluent in the English language. Available to work nights and weekends to complete projects as necessary. Proficient in MS office. AutoCAD Civil 3D and/or Bluebeam Revu experience is a plus. Physical Demands: Normal office environment Employer's Disclaimer: Position subject to possible modification to reasonably accommodate individuals with disabilities.

Providence caregivers are not simply valued - they're invaluable. Join our team at Enterprise Information Services and thrive in our culture of patient-focused, whole-person care built on understanding, commitment, and mutual respect. Your voice matters here, because we know that to inspire and retain the best people, we must empower them. We are seeking a visionary Principal Service Engineer to join our IS Asset and Supply Chain Management team, driving innovation in IT service delivery at scale. In this role, you will leverage ServiceNow to ensure data integrity, streamline workflows, and optimize hardware fulfillment processes -including IT asset disposition (ITAD), imaging, and project-based orders. You'll collaborate with 3rd Party Logistics Partners, End User Support, and internal ServiceNow and Oracle teams to deliver seamless IS equipment services to caregivers. As a technical leader, you will design and implement service architectures, establish best practices, and champion automation to enhance compliance, resilience, and cost efficiency. With a focus on continuous improvement and AI-driven user experiences, you will mentor peers, influence strategic decisions, and act as a thought leader in adopting emerging technologies-all while ensuring exceptional caregiver experiences and measurable improvements in KPIs. Providence supports 100% virtual work for residents located in the following areas: + Alaska + Washington + Oregon + Montana + California + Texas Required Qualifications: + Bachelor's Degree - Supply Chain, Computer Engineering, Computer Science, Mathematics, Engineering -OR- a combination of equivalent education and experience + 8 years Related experience; more preferred. + Strong experience in automation, specifically related to deployment, recovery, or other manual processes. + Strong experience with n-tier solutions. + Strong experience with resilience modeling (failure mode analysis) and ability to simulate service outages for point solutions (automated) and platforms (manually). + Strong experience influencing engineering team members in translating customer and technical requirements into service architecture to meet Quality of Service Expectations. + Strong experience leading and representing the Service in backlog discussions and standups to establish appropriate prioritization of Live Site requirements. + Strong experience leveraging data and metrics to drive behavior, process, and priority decisions. Using logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions, or approaches to problems. + Strong experience in advanced problem solving using systematic procedures and investigating problems utilizing root cause analysis. Preferred Qualifications: + Master's Degree - Supply Chain, Computer Engineering, Computer Science, Mathematics, Engineering -OR- a combination of equivalent education and experience + Experience in a Healthcare environment + PMP Certification + Agile development experience + 8 or more years of experience leading service engineering initiatives across complex, global supply chain environments, driving operational excellence system reliability, and cross-functional collaboration to deliver scalable, high-impact solutions + 5 or more years of experience working directly in ServiceNow + Lead end-to-end design and implementation of scalable service engineering solutions for global supply chain systems + Develop and optimize automation frameworks to improve supply chain reliability, uptime, and performance. + Strong proficiency in scripting (e.g., Power Automate) to support diagnostics, monitoring, and automation + Drive continuous improvement initiatives across procurement and order fulfillment + Collaborate with vendors and third-party logistics providers to ensure seamless integration and service delivery + Implement KPIs and dashboards to monitor service health and supply chain performance in real time + Lead feedback reviews and implement corrective actions to prevent recurrence Salary Range by Location: + AK: Anchorage: Min: $68.33, Max: $116.36 + AK: Kodiak, Seward, Valdez: Min: $71.23, Max: $121.29 + California: Humboldt: Min: $71.23, Max: $121.29 + California: Northern California - Except Humboldt: Min: $79.92, Max: $136.08 + California: Southern California: Min: $71.23, Max: $121.29 + Montana: Except Great Falls: Min: $55.01, Max: $93.68 + Montana: Great Falls: Min: $52.12, Max: $88.75 + Oregon: Non-Portland Service Area: Min: $63.70, Max: $108.47 + Oregon: Portland Service Area: Min: $68.33, Max: $116.36 + Texas: Min: Min: $52.12, Max: $88.75 + Washington: Western: Min: $71.23, Max: $121.29 + Washington: Southwest - Olympia, Centralia: Min: $68.33, Max: $116.36 + Washington: Clark County: Min: $68.33, Max: $116.36 + Washington: Eastern: Min: $60.81, Max: $103.54 + Washington: Southeastern: Min: $63.70, Max: $108.47 Why Join Providence? Our best-in-class benefits are uniquely designed to support you and your family in staying well, growing professionally, and achieving financial security. We take care of you, so you can focus on delivering our Mission of caring for everyone, especially the most vulnerable in our communities. About Providence At Providence, our strength lies in Our Promise of "Know me, care for me, ease my way." Working at our family of organizations means that regardless of your role, we'll walk alongside you in your career, supporting you so you can support others. We provide best-in-class benefits and we foster an inclusive workplace where diversity is valued, and everyone is essential, heard and respected. Together, our 120,000 caregivers (all employees) serve in over 50 hospitals, over 1,000 clinics and a full range of health and social services across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. As a comprehensive health care organization, we are serving more people, advancing best practices and continuing our more than 100-year tradition of serving the poor and vulnerable. Posted are the minimum and the maximum wage rates on the wage range for this position. The successful candidate's placement on the wage range for this position will be determined based upon relevant job experience and other applicable factors. These amounts are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities. Providence offers a comprehensive benefits package including a retirement 401(k) Savings Plan with employer matching, health care benefits (medical, dental, vision), life insurance, disability insurance, time off benefits (paid parental leave, vacations, holidays, health issues), voluntary benefits, well-being resources and much more. Learn more at providence.jobs/benefits. Applicants in the Unincorporated County of Los Angeles: Qualified applications with arrest or conviction records will be considered for employment in accordance with the Unincorporated Los Angeles County Fair Chance Ordinance for Employers and the California Fair Chance Act. About the Team Providence Shared Services is a service line within Providence that provides a variety of functional and system support services for our family of organizations across Alaska, California, Montana, New Mexico, Oregon, Texas and Washington. We are focused on supporting our Mission by delivering a robust foundation of services and sharing of specialized expertise. Providence is proud to be an Equal Opportunity Employer. We are committed to the principle that every workforce member has the right to work in surroundings that are free from all forms of unlawful discrimination and harassment on the basis of race, color, gender, disability, veteran, military status, religion, age, creed, national origin, sexual identity or expression, sexual orientation, marital status, genetic information, or any other basis prohibited by local, state, or federal law. We believe diversity makes us stronger, so we are dedicated to shaping an inclusive workforce, learning from each other, and creating equal opportunities for advancement. Requsition ID: 403936 Company: Providence Jobs Job Category: Development/Engineering Job Function: Information Technology Job Schedule: Full time Job Shift: Day Career Track: Business Professional Department: 4011 SS IS ESI CLOUD HOSTING Address: WA Renton 1801 Lind Ave SW Work Location: Providence Valley Office Park-Renton Workplace Type: Remote Pay Range: $See Job Posting - $See Job Posting The amounts listed are the base pay range; additional compensation may be available for this role, such as shift differentials, standby/on-call, overtime, premiums, extra shift incentives, or bonus opportunities.

General Responsibilities: Perform field and/or laboratory testing, observation, and inspection of construction materials (e.g. soils, aggregates, concrete, asphalt, and steel). Communicate with project manager, engineering technicians, client representative, contractor's representative and others as applicable regarding the construction site, project requirements, and testing, observation, and inspection requirements and results. Transport material samples with associated identifying documentation to the laboratory for further testing and analysis. Tabulate, prepare, and submit data and observation in the form of written and digital reports as work is performed for daily transmittal to the Terracon Project Manager. Maintain and clean equipment, vehicles and work areas. May assist with scheduling and dispatch of Technicians to project sites. Adhere to strict safety standards. Essential Roles and Responsibilities: * Performs testing, observation, and inspection as directed in accordance with training and the specified procedures. * Provides clear documentation of findings and results. * Performs basic analysis of data to verify accuracy before communication and submittal to the Project Manager. * Communicates information to Project Manager and other personnel as directed by the PM. * Assists higher level technicians on complex tasks. * Maintains assigned equipment and related calibration. * Drive a vehicle such as a Ford F-150 or equivalent. * Follows safety rules and practices and other safety requirements for all projects. Performs pre-task planning prior to executing work. Report any safety issues or concerns to management. * Be responsible for maintaining quality standards on all projects. Requirements: * High school diploma or equivalent. * Minimum 1-2 years of relevant experience or the equivalent in training and related experience. * Experience with laptop computer use and Microsoft Word and Excel * Valid driver's license with acceptable violation history. Preferred Certification: * Certifications in one or more of the following areas: * NICET Level II certification in Construction Materials Testing in one or more of the following categories: Asphalt, Concrete, Soils. * NICET Level II certification in Geotechnical in one or more of the following categories: Construction, Laboratory, Exploration, Generalist * ICC certification in one or more of the following categories: Reinforced Concrete, Spray-applied Fireproofing, Structural Masonry, Prestressed/Post-Tensioned Concrete, Structural Steel - Bolting, Structural Steel - Welding. * American Welding Society (AWS) Certified Associate Welding Inspector (CAWI) * American Society for Nondestructive Testing (ASNT) Level II certification in more than one of the following areas: Visual Testing (VT), Magnetic Particle Testing (MT), Dye Penetrant Testing (PT), Radiographic Testing (RT), Ultrasonic Testing (UT). * Other national, regional, state, and local Materials related certifications requiring experience and written examination will also be considered if deemed appropriate by the Terracon Department Manager. Required Certification: * ACI certification in one or more of the following areas: * Concrete Field Testing Technician Grade I * Concrete Strength Testing Technician * Certified in radiation safety and Nuclear Density Gauge operation. * Successful completion of related internal safety certifications. About Terracon Terracon is a 100 percent employee-owned multidiscipline consulting firm comprised of more than 8,000 curious minds focused on solving engineering and technical challenges from more than 200 locations nationwide. Since 1965, Terracon has evolved into a successful multi-discipline firm specializing in environmental, facilities, geotechnical, and materials services. Terracon's growth is due to our talented employee-owners exceeding expectations in client service and growing their careers with new and exciting opportunities in the marketplace. Terracon's vision of "Together, we are best at people" is demonstrated through our excellent compensation and benefits package. Based on eligibility, role and job status, we offer many programs including medical, dental, vision, life insurance, 401(k) plan, paid time off and holidays, education reimbursement, and various bonus programs. EEO Statement Terracon is an EEO employer. We encourage qualified minority, female, veteran and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment, or any employee because of race, color, religion, national origin, age, sex, sexual orientation, gender identity, gender, disability, age, or military status.

Job Description Onsite Mechanical Engineer - Liquid Cooling SME - Critical Facilities - Impact, TX This opportunity is working onsite at a HPC / Hyperscale Data Center Facility. This firm provides data center solutions custom-fit to the requirements of their client's mission-critical operational facilities. They provide reliability of mission-critical facilities for many of the world's largest organizations (Enterprise and Hyperscale Customers). This role offers exciting projects that incorporate cutting-edge liquid cooling, HVAC, and mechanical infrastructure technologies. Our client is seeking an Onsite Mechanical Engineer to act as a Subject Matter Expert / SME in liquid cooling at the rack level for Hyperscale client onsite at a the Customer's Data Center. They will provide onsite design, commissioning consulting and management expertise in Data Center / Mission Critical Facilities Space with the mindset to provide reliability, energy efficiency, and sustainable design when providing these consulting services. This career-growth minded opportunity offers leading-edge technology and innovation as well as competitive salaries and benefits. The ideal candidate will have past experience with Mechanical , HVAC and Controls Systems specifically for large data centers / Hyperscale. They will have experience and in-depth knowledge of HVAC / Mechanical / Controls System design, installation, commissioning and operations. This role will support ongoing facility operations, upgrades, and infrastructure deployments with a strong focus on HVAC, liquid cooling at Rack and Server, piping and other mechanical systems used in hyperscale / HPC data center environments. Responsibilities: Oversee projects, assist with design- plans, provide and gather specifications, and execute assignments in a multidisciplinary mechanical engineering design role for large sized data center facility design projects Serve as the mechanical subject matter expert onsite in meetings and throughout engineering, commissioning, and go live Assist with Conceptual Designs gathered from meetings with the client and translate to field-level execution Support data center operations with design upgrades, retrofits, and equipment assessments for mechanical and cooling systems Review mechanical design criteria, specifications, drawings, equipment submittals, and other documentation pertinent to engineering design and commissioning Work with Management to create / respond to RFPs Represent the company in: commissioning, design, construction and coordination meetings Participate in onsite commissioning efforts including HVAC systems, chilled water systems, CRAHs, cooling towers, and liquid cooling infrastructure Understand functional tests for various systems, such as: HVAC / Mechanical Systems, Controls, etc. Interface with clients, contractors, equipment vendors and owners agents and internal stakeholders as needed; Execute project assignments; Interface with project contractors, vendors, and testing technicians; Interact with all facets of the company: engineering, design, when requested Write comprehensive technical reports when needed which including system analysis, deficiency lists, and O&M documentation in addition to: recommendations for optimizing building operations, functional checklists, list of deficiencies, equipment operation and maintenance manuals Troubleshoot HVAC and cooling systems in the field; identify and resolve equipment performance issues Assist with quality control processes and mechanical system validation procedures Qualifications: 5-10 years of experience in Mechanical systems, HVAC, or liquid cooling infrastructure for critical facilities or data centers Bachelor's Degree in Mechanical Engineering or similar engineering degree a plus Licensed PE / EIT a Plus Experience with AutoCAD for minor tweaks for any design plans a plus Previous experience using: Revit MEP projects, BIM a plus Experience with Mechanical Systems ( HVAC , Liquid Cooling, Manifolds, Cooling Towers, CFD ( Fluid Dynamics), Boilers , Chillers , Pumps , CRAC / CRAH Units , Air Handling Units , etc. ) Familiarity with mechanical equipment testing, balancing, equipment sizing, calculations, and commissioning in high-uptime data center facilities Previous Data Center / Mission Critical experience a must Ability to successfully work independently Excellent communication skills, both written and verbal (this role requires heavy amount of writing, documentation, and client interaction) Self Starter, self motivated, and should prioritize well Previous experience in the Military / Military Veterans a huge plus! Experience with Electrical / Mechanical: Navy nukes - EMN, ETN, MMNs, Seabees, Army - Power Generation, Air Force - Power Production, Generator Techs, Maritime, Coast Guard, Army National Guard, etc. Submittal Instructions: Please apply directly by clicking the link below, alternatively you can forward your resume directly to: ************************************** After applying, if you have further questions, you may call ************ and ask for Iggy. You can also submit via our career portal and take a look at other Critical Facility openings we are working on at, *************************** If this job is not for you, feel free to forward this along. WE PAY FOR REFERRALS!! Company offers competitive salaries and benefits package including medical insurance, a 401(k) plan EOE/AA Employer M/F/D/V Pkaza LLC is a third-party employment firm. All fees assessed by Pkaza LLC will be paid by our employer that we represent and not by the candidate

Smiths Interconnect, is a global leader in the design and manufacture of high-performance interconnect solutions. Our products are used in mission-critical applications across industries such as aerospace, defense, telecommunications, and industrial markets. At Smiths Interconnect, we are committed to innovation, quality, and providing cutting-edge solutions that connect the world's most demanding systems. Smiths Interconnect is part of Smiths Group. For over 170 years, Smiths has been pioneering progress by engineering for a better future. We serve millions of people every year, to help create a safer, more efficient and productive, and better-connected world across four global markets: energy, security & defense, space & aerospace and general industrial. Listed on the London Stock Exchange, Smiths employs c.16,000 colleagues in over 50 countries. Job Description Job Purpose: * Provides engineering expertise in assigned areas to ensure that all products are designed, procured, and built in accordance with customer and company quality requirements for sales growth and profitability. Responsibilities: * Designs & develop new products and redesigns existing products to meet customer needs and specifications. * Perform / Create / Update product design guidelines, customer standards, and / or analytical reports as assigned. * Provide technical support to organizational stakeholders (Production, Quality, Marketing and Sales) and external customers. * Participate in the development of product and technology roadmaps, in support of cross-functional stakeholders. * Prepare technical proposals, and presentations as required to support customers, sales representatives and lead design reviews. * Conduct patent assessment and prepare technical documents for filing new patent. * Investigates and suggests solutions to the Engineering Manager or Director with regard to product related problems. * Interface with suppliers to evaluate component specification, new manufacturing techniques, and/or new materials. * Compliance and participation in all EHS programs, policies, procedures and training requirements. * Participate and contribute to team training, development, mentoring and audits. * Provide mentorship and support to junior-level technologists. * Demonstrate behaviors consistent with company policies. Other duties as assigned. Qualifications Technical Knowledge, Skills and Abilities: * Bachelor of Mechanical, Mechatronics, Electromechanical Engineering or equivalent. * At least 2-4 years of post-graduate experience. * Excellent oral and written communication skills in English. (An interview in English will be performed). * Experience with SolidWorks 3D modeling software or equivalent & understanding GD&T, ANSI/ASME standards. * Knowledge of engineering mechanics, material properties, physics and manufacturing methods. * Knowledge of electrical theories especially in signal transmission, characterization and signal integrity. * Familiar with the effects of mechanical component design on its electrical functions/performance. * Experience with Six Sigma or equivalent tools and Failure Mode Effects Analysis (FMEA) preferred. * Experience on Finite Element Analysis (structural, thermal & fluid) preferred. * Experience on electromagnetic (EM) and RF simulations preferred. * Experience on IC test socket or electrical connector designs is a plus. * Patent experience is a plus. * Attention to detail/self-directed and able to work under normal supervision. * Ability to analyze complex problems using data-driven approach and define solutions. * Proficient with Microsoft Office products. Travel %: 0-20% Security: Please State if US Citizen or permanent Resident Required Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)

**Requisition ID:** 177138 **Job Level:** Entry Level **Home District/Group:** Kiewit Equipment Services **Department:** Equipment **Market:** Power **Employment Type:** Full Time As an Entry Level Equipment Engineer, you will support Regional Construction & Mining operations. This position is responsible for the planning, scheduling, budgeting, utilization and reliability of a construction and mining equipment fleet. The position will deal with day to day as well as long term issues related to an equipment fleet. The position's main focus will be to improve equipment reliability as well as implement, monitor, audit, and manage preventative maintenance programs. **For this role, the start date is immediate.** **District Overview** Kiewit Equipment Services (KES) helps to ensure the profitability of Kiewit projects through the improved equipment utilization and mechanical reliability by delivering world-class equipment and service. **Location** One of the many things that makes Kiewit's culture unique is that we go where the work is, which exposes your career to abundant opportunities. We relocate our teams based on the work that is available, combined with the development plans, skill sets and career goals of each team member. This means your Kiewit adventure is custom-designed to meet our shared needs. **Responsibilities** - Understand and comply with all federal, state, and company health, safety, and environmental requirements - Material handling and procurement - Create and maintain tool/filter lists and documentation - Inspections of equipment and parts - Logistics management and communication - Long/short range equipment planning, scheduling, and budgeting - Planning and paperwork processing to prepare for critical lifts - Use reliability and failure analysis data to increase equipment availability and reliability - Establish and maintain communications between all levels of supervision and management - Support of craft maintenance technicians - ordering parts, manage inventory, schedule crews, and manage quality and safety - Specialty projects as needed **Qualifications** - Has obtained an undergraduate AS/ BS degree in Diesel/Automotive Technology, Heavy Equipment Technology, Mechanical Engineering Technology, Construction Management - 1+ year of experience with equipment is preferred - 1+ year of experience with equipment planning, scheduling, and budgeting is preferred - Strong work ethic - Willing to do what it takes to get the job done - Strong organizational, time management and communication skills - Strong attention to detail and ability to focus on multiple projects at once while prioritizing tasks - Willingness to travel and relocate as required - Willingness to work in both office and field environments - Knowledge of CAD modeling programs is preferred - Ability to freely access all points of a construction site or equipment yard in wide-ranging climates and environment \#LI-JT1 Other Requirements: + Regular, reliable attendance + Work productively and meet deadlines timely + Communicate and interact effectively and professionally with supervisors, employees, and others individually or in a team environment. + Perform work safely and effectively. Understand and follow oral and written instructions, including warning signs, equipment use, and other policies. + Work during normal operating hours to organize and complete work within given deadlines. Work overtime and weekends as required. + May work at various different locations and conditions may vary. We offer our fulltime staff employees a comprehensive benefits package that's among the best in our industry, including top-tier medical, dental and vision plans covering eligible employees and dependents, voluntary wellness and employee assistance programs, life insurance, disability, retirement plans with matching, and generous paid time off. Equal Opportunity Employer, including disability and protected veteran status. Company: Kiewit

DPR Construction is seeking a senior project engineer with a minimum of 5 years of commercial construction experience. Project engineer responsibilities will be on commercial projects within our core markets: advanced technology, commercial, healthcare, higher education and life sciences. Project engineers will work closely with all members of the project team and will be responsible for the following: * Participation and application of DPR's environmental health and safety plan to constantly maintain injury-free environments including performing weekly safety audits. * Mentor, develop and train team members for fast-paced growth. * Management of other project engineer team members. * Understanding and enforcement of contracts, including between DPR and subcontractors as well as DPR and the owner. * Assist superintendent and project manager in the implementation of DPR policies and the execution of the project. * Organizing the duties of other engineers, field office coordinator, project accountant and other assigned project staff. This includes providing direction, prioritization, and performance feedback. * Participation in trainings and company meetings to facilitate individual and company growth. * Organizing and electronically archiving project files for easy access by the project team. * Preparation, monitoring, and updating project schedules. Working with the superintendent to impact the schedule with project constraints. * Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. * Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. * Identifying, assembling, negotiating, and distributing change orders to both the owner and subcontractors. * Preparing agendas, documents, meeting minutes, and actions for various meetings including owner/architect/contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. * Participating in project cost control. This includes maintaining internal records and working with subcontractors to make sure changes are getting paid. * Preparing owner billing by assembling DPR costs, receiving and reviewing subcontractor invoices and organizing the documents in accordance with the owner's requirements. Qualifications We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: * Organized work approach with the ability to adapt and adjust as required to support the projects' current needs. * Detailed knowledge of the assigned project scopes with a 100% hands-on approach. * A desire to seek out and resolve construction problems/conflicts that arise during design and construction phases. * Goal-orientated approach to promptly coordinate and resolve project issues within the project team (including interfacing with designers, engineers, and owners). * Excellent listening and strong communication skills. * Ability to identify and resolve complex issues. * Effective participation in team environment. * Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar) and BIM software (AutoCAD, Revit, Navisworks or similar). * 5+ years of experience as a project engineer, preferably within DPR's core markets. * Bachelor's degree in construction management, civil engineering or related field. * A strong work ethic, a "can-do" attitude and a passion for construction. * This position is salaried. DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary The Bulk Gas Engineering team is focused on comprehensively owning, commissioning, maintaining, supporting, and improving specialty and bulk gas operations at the Samsung T1 site. As a part of the Gas Systems team, you will provide support by interacting with the on-site contract operations team. Role and Responsibilities Here's what you'll be responsible for: Equipment Operations * Providing necessary technical leadership to internal engineering, contracted maintenance, and associated vendor teams. * Coordinating equipment technical review boards between equipment vendors and GCS teams to standardize equipment, improve reliability, and work methods. * Improving GCS group engineering development and mentorship program, including understanding of how the material GCS provides is utilized by Fab Engineering. * Interfacing with various FAB engineering teams providing technical analysis, support, supply issue resolution, and quality improvements. * Providing expertise for bulk gas systems, gas analyzer systems, safety, quality, and reliability standards, as well as improvements for those systems. * Driving continuous improvement projects to improve quality, reliability, productivity, and safety, while also reducing cost. * Work days and hours: M-F, 1st Shift. New Equipment Startup * Commissioning and startup new equipment installations. * Supporting and leading MOC for PSM and RMP covered processes. * Driving continuous improvement projects to improve quality, productivity, and safety, while also reducing cost. * Evaluating future scenario planning including infrastructure budget and schedule forecasting, utilization and capacity data analysis, and reporting. * Process Improvement. * Implementing standardization methods across equipment fleet (work processes, alarm management, 6s principles). * Optimizing PM (preventative maintenance) strategies for aging assets to minimize risk of unexpected failures. * Improving process control and monitoring methods to ensure a robust proactive approach to sustaining large equipment sets. Skills and Qualifications Here's what you'll need: * BS degree in Mechanical or Chemical engineering, or related technical field. * 5+ year's direct operations experience related to gas and/or chemical supply systems. * Semiconductor or electronics facility support preferred, with an emphasis on safety and hazardous process materials. The current base salary range for this role is between $70,480 - $179,090. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: * Medical, dental, and vision insurance * Life insurance and 401(k) matching with immediate vesting * Onsite café(s) and workout facilities * Paid maternity and paternity leave * Paid time off (PTO) + 2 personal holidays and 10 regular holidays * Wellness incentives and MORE Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance. All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. * Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here. * Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.

Division: Dallas Main Minimum Years Experience: 4 Travel Involved: Job Type: RegularJob Classification: ExperiencedEducation:Bachelors DegreeJob Family:ConstructionCompensation:Salaried Exempt Position Description: Manage, evaluate, and assess information related to Mechanical and Electrical systems necessary to construct the project on time in a safe manner, within budget, and to the quality specified by the contract documents. Essential Duties & Responsibilities: Specifically relating to the mechanical and electrical systems: * Lead the Turner project team, subcontractors, owner's consultants and representatives to ensure optimal alignment and efficient systems installation. * Prepare and manage the contract item's list for all components, materials, and systems to ensure that all ROJ dates are in compliance with the project schedule with the appropriate approval status. * Participate in schedule update meetings and provide the latest information for an informed and accurate schedule. * Evaluate and manage the processing of RFI's. * Manage the budget including the review, evaluation, and negotiation of all change orders with understanding of the financial status of all subcontractors. * Supervise, coach and mentor Assistant MEP Engineers. * Co-lead the MEP Coordination Process with the VDC Engineer, ensuring overall installation is in compliance with the design requirements, operations and maintenance fundamentals, and quality standards. * Prepare scope of work documents with a division of responsibility for trades and specific scopes of work for temporary operations. * Partner with the MEP Superintendent to resolve conflicts between the mechanical and electrical systems with the site logistics plan and in compliance with the project schedule. * Co-lead with the MEP Superintendent the overall turnover process including start-up, testing, commissioning and closeout. * Conduct regular project walkthroughs with the MEP staff to ensure that work is proceeding in accordance with the contract documents, coordination drawings, and approved submittals. * Identify and inform field staff of difficult installation requirements in sufficient time to allow for proper planning and execution. * Manage and secure all municipal and agency documentation required for temporary certificates of information and system operation. * Create and implement the quality control plan with the MEP Superintendent. Qualifications: Bachelor's Degree in Engineering and a minimum of four years of relevant engineering experience or an equivalent combination of education, training, and/or experience relating to mechanical and electrical systems. Technical expertise and understanding of all mechanical and electrical systems that support the broad array of project types in our portfolio and how they interrelate with each other. Business acumen to plan, manage, and execute all the essential duties with excellent verbal and written communication skills, organizational ability, and proficiency with computer applications. Demonstrate the personal attributes of a leader to encourage the development of a high performing team. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Performance of the duties will occasionally require physical ability to climb permanent and temporary stairs, passenger use of construction personnel hoists, ability to climb ladders and negotiate work areas under construction. Specific vision abilities required by this job include close vision, peripheral vision, depth perception, and the ability to adjust focus. Performing this job requires use of hands to finger, handle, or feel objects, tools or controls, sit, talk and hear (bells, whistles, etc.), stand, climb, balance, stoop, kneel, crouch, or crawl. Employee must occasionally lift and/or move up to 50 lbs. Work Environment: While performing the duties of this job, the employee regularly works on-site at the construction work site where the employee is exposed to moving mechanical parts; high precarious places; fumes or airborne particles; outside weather conditions and risk of electrical shock. The noise in these work environments is usually moderate to very loud. * May perform other duties as assigned. Where applicable, all activities will include disabled and veterans' organizations. Turner is an Equal Opportunity Employer - race, color, religion, sex, sexual orientation, gender identity, national origin, disability, status as a protected veteran, or other characteristics protected by applicable law.

About Samsung Austin Semiconductor Samsung is a world leader in advanced semiconductor technology, founded on the belief that the pursuit of excellence creates a better world. At SAS, we are Innovating Today to Power the Devices of Tomorrow. Come innovate with us! Position Summary In your role as an Equipment Engineer you'll be responsible for documenting, trending, and sustaining the overall health of the PCS equipment fleet. The PCS equipment fleet includes dry vacuum Pumps, heat-exchanging Chillers, chemical abatement Scrubbers, and associated Accessory equipment like gate valves, pipe heaters, and N2 injection systems. The core job tasks include the identification of data sets that define equipment condition, organization of data trends to display the health of equipment via real-time dashboard, and creation of work processes and expectations to take action on fleet trends. Also, you'll be responsible to develop functional knowledge of all PCS equipment types and collaborate with each equipment team to monitor, control, and sustain fleet health using Total Productive Maintenance (TPM) principles. Role and Responsibilities Here's what you'll be responsible for: * Equipment Expertise * Understand the core function of each PCS equipment type * Demonstrate knowledge of design concepts across each PCS equipment type * Learn the common failure modes in each PCS equipment type * Identify the roster of parameters each equipment is capable of measuring * Maintenance and Procedure * Understand the maintenance procedures for each equipment type * Learn how each team schedules maintenance on equipment * Establish expectations on maintenance procedures and define constraints for failure conditions * Fleet Health Visibility * Compile data sets of equipment parameters and rank them by health based on value * Evaluate parameter values using SPC methodologies and define spec limits * Build and modify dashboards that visualize the performance and health of equipment * Automate escalations of equipment issues based on spec limits * Create and enforce procedures that are used to address fleet health issues * Engineering Reliability * Analyze equipment performance and derive improvement opportunities * Author preventive‑maintenance schedules based on usage hours, manufacturer recommendations, and failure‑mode analyses * Perform root‑cause investigations for abnormal equipment failures * Organize and lead projects that have clearly defined benefits and ROI * Team Collaboration * Interface with equipment engineer peers to drive improvements in their respective modules * Manage competing priorities within each module and generate progress on the important initiatives * Documentation & Reporting * Produce and maintain operating manuals, SOPs, and fleet records * Submit monthly KPI dashboards (pump uptime, mean‑time‑between‑failure) * Record all incident reports for audit purposes Skills and Qualifications Here's what you'll need: * Bachelor of Engineering in Mechanical, Chemical, Industrial, or Process Engineering * 3+ years of hands‑on experience with sub-fab systems in semiconductor industry * Experience in other manufacturing environments with large quantities of equipment * Proficiency in data/statistical analytics * Experience with mechanical repair of equipment * Knowledge of common industrial sensors (pressure, temperature, flow, etc) * Proficiency with Total Productive Maintenance (TPM) concepts and how to implement them in industry. All positions at Samsung Austin Semiconductor require you to be onsite. We are not currently accepting applications for candidates who currently, or in the future, will need visa sponsorship. The current base salary range for this role is between $70,480 - $179,090. Individual base pay rates will depend on factors including duties, work location, education, skills, qualifications and experience. Total compensation for this position will include a competitive benefits package and may include participation in company incentive compensation programs, which are based on factors to include organizational and individual performance. Total Rewards At Samsung SAS, base pay is just one part of our total compensation package. The base compensation for this role will depend on education, experience, skills, and location. We offer a comprehensive benefits package, including: * Medical, dental, and vision insurance * Life insurance and 401(k) matching with immediate vesting * Onsite café(s) and workout facilities * Paid maternity and paternity leave * Paid time off (PTO) + 2 personal holidays and 10 regular holidays * Wellness incentives and MORE Eligible full-time employees (salaried or hourly) may also receive MBO bonuses based on company, division, and individual performance. All positions at SAS are full-time on-site. U.S. Export Control Compliance This role requires access to information subject to U.S. export control laws. Applicants must be authorized to access such information or eligible for government authorization. Trade Secrets Notice By submitting an application, you agree not to disclose to Samsung-or encourage Samsung to use-any confidential or proprietary information (including trade secrets) belonging to a current or former employer or other entity. * Please visit Samsung membership to see Privacy Policy, which defaults according to your location. You can change Country/Language at the bottom of the page. If you are European Economic Resident, please click here. * Samsung Electronics America, Inc. and its subsidiaries are committed to employing a diverse workforce, and provide Equal Employment Opportunity for all individuals regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, gender identity, status as a protected veteran, genetic information, status as a qualified individual with a disability, or any other characteristic protected by law.

Smiths Interconnect is a leading provider of high reliability connectivity products and solutions serving segments of aerospace and defense, medical, semiconductor test, and industrial markets. It designs and manufactures technically differentiated electronic components, microwave, optical and radio frequency products and sub-systems that connect, protect and control critical applications. Smiths Interconnect is part of Smiths Group plc and has 21 Sales, R&D and Manufacturing locations in 12 countries, including Canada, US (Florida, Texas, Kansas, and Maryland), Mexico, Costa Rica, France, Germany, Italy, UK, Tunisia, India, China, and Singapore Job Description Ready to flex your engineering muscles and create some seriously cool products? As our Mechanical Design Engineer, you'll be the wizard behind the curtain, ensuring our gadgets and gizmos are top-notch, customer-approved, and ready to take over the world (or at least the market)! Responsibilities: * Unleash your inner inventor! Design new products and give existing ones a fabulous makeover to meet customer needs and specifications. It's like extreme makeover: product edition! * Be the go-to guru for all things technical. Provide support to internal departments and select customers, because knowledge is power, and you're practically a superhero! * Channel your inner detective to review drawings and documentation. Make sure they're up to snuff with project specs and company policies. No detail escapes your eagle eyes! * Become the master of change with Engineering Change Release Notifications (ECN's). It's like being a DJ, but for engineering - you're dropping the hottest updates! * Craft and update product design guidelines, customer standards, and analytical reports. Think of it as writing the rulebook for awesome engineering! * Put on your thinking cap and brainstorm solutions to product-related problems. Present your eureka moments to the Engineering Manager - you're basically the Sherlock Holmes of engineering! * Be a safety superstar! Participate in all of Smiths Interconnect's EHS programs, policies, procedures, and training requirements. Safety first, then engineering brilliance! * Embrace the element of surprise with other duties as assigned. It's like a box of chocolates - you never know what you're gonna get! * Master the art of schedule Tetris. Flexibility is your middle name! * Pack your bags for adventure! Up to 20% travel may be required. It's like being James Bond, but with more engineering and fewer explosions (hopefully). Qualifications Ready to join our league of extraordinary engineers? Here's what you need to bring to the table: * A shiny Bachelor's degree in engineering (Mechanical Design preferred). It's like your golden ticket to Willy Wonka's factory, but for cool gadgets! * 2+ years of experience in the wild world of engineering. We're talking real-life XP points here! * A Jedi-like knowledge of engineering mechanics, physics, and manufacturing methods. May the force of science be with you! * SolidWorks 3D modeling skills that would make Tony Stark jealous. Equivalent software skills are cool too! * GD&T and ANSI/ASME standards? You know them like the back of your hand (or like your favorite meme collection). * Finite Element Analysis skills (structural, thermal & fluid) are a big plus. It's like being able to see The Matrix, but for engineering! * Decision-making skills sharper than a lightsaber and judgment more accurate than a Stormtrooper's aim (which isn't hard, but you get the point). * Communication skills so good, you could explain quantum physics to a golden retriever (written and verbal). * Interpersonal skills that would make you the life of any engineering party. You're a team player with a dash of solo artist! * Attention to detail that would impress Sherlock Holmes. You're practically a detective, but for engineering puzzles! * Ability to juggle multiple priorities like a circus performer. High-stress situations? Pfft, you eat those for breakfast! * Microsoft Office skills that would make Bill {NAME} proud. Excel at Excel, powerhouse with PowerPoint! * English language skills smoother than butter on a hot pancake (both speaking and writing). * For our US sites: You need to be a US citizen or permanent resident. It's like being in a secret club, but with more engineering and less secret handshakes. * Flexibility to travel up to 20% of the time. It's like being James Bond, but with more CAD and fewer martinis! Travel %: 20% or less (Because even superheroes need some downtime!) Security: US Citizen or Permanent Resident Required for US sites (Uncle {NAME} wants YOU... to follow ITAR compliance!) Additional Information All your information will be kept confidential according to EEO guidelines. We believe that different perspectives and backgrounds are what make a company flourish. All qualified applicants will receive equal consideration for employment regardless of color, religion, sex, sexual orientation, gender identity, national origin, economic status, disability, age, or any other legally protected characteristics. We are proud to be an inclusive company with values grounded in equality and ethics, where we celebrate, support, and embrace diversity. At no time during the hiring process will Smiths Group, nor any of our recruitment partners ever request payment to enable participation - including, but not limited to, interviews or testing. Avoid fraudulent requests by applying jobs directly through our career's website (Careers - Smiths Group plc)