Research and development engineer jobs in Folsom, CA - 348 jobs

SALARY: $80,000-$150,000+ (depending on experience) The Mechanical & Plumbing Engineer provides technical leadership, design services, and engineering coordination in support of estimating, preconstruction, project management, detailing, fabrication, and field operations. This role is responsible for developing cost-effective, code-compliant, energy-efficient, and constructible mechanical and plumbing systems that align with company standards, protect project scope and budget, and support successful project execution across all delivery methods, with a strong emphasis on design-build work . REQUIREMENTS: Professional Engineer (PE) license in Mechanical Engineering. 5+ years of experience in mechanical engineering design. Proven ability to design projects independently and manage multiple assignments. Strong background in plumbing and mechanical systems. Experience with design-build projects, ranging from unit change-outs to full ground-up builds. Ability to work on large TI (Tenant Improvement) projects and new building construction. DUTIES & RESPONSIBILITIES 1. Design cost-effective, energy-efficient mechanical and plumbing systems that meet client requirements, budget constraints, and company standards. 2. Provide complete, code-compliant system layouts, drawings, specifications, and engineering narratives for all project delivery methods. 3. Perform system calculations including loads, sizing, pressure drops, and energy analysis. 4. Maintain current knowledge of applicable mechanical, plumbing, energy, and building codes, including AHJ requirements. 5. Participate in energy evaluations, payback analyses, and sustainability initiatives (including LEED support where applicable). 6. Support estimating with design-build concepts, system layouts, technical clarifications, and engineering narratives. 7. Review plans and specifications for scope completeness, constructability, risks, and opportunities. 8. Review and validate proposed substitutions and “equals” prior to bid submission and document approved alternatives. 9. Assist estimating and project management with obtaining complete, compliant mechanical equipment quotes, including coordination with manufacturers' representatives. 10. Maintain a clear understanding of project scope, estimated cost, design budget, risks, and optimization opportunities. 11. Collaborate with detailing, fabrication, and field teams to ensure constructability and early system optimization. 12. Participate in project kickoff meetings, coordination meetings, and strategic planning sessions. 13. Provide technical support to project management and detailing teams on both design-build and plan/spec projects, including drawing interpretation and RFI production and review. 14. Participate in and oversee system optimization efforts throughout construction. 15. Support PlanGrid (or equivalent platform) population and maintenance in accordance with company procedures. 16. Prepare permit-ready, budget-compliant design drawings and documentation for design-build and special projects. 17. Coordinate with AHJs to obtain permits and resolve permitting issues, including in-person permit acquisition when required. 18. Support inspections and address code or compliance comments as necessary. 19. Develop and maintain professional working relationships with clients, vendors, suppliers, subcontractors, unions, and AHJs. 20. Manage external engineering and detailing resources when outsourced, including defining scope, schedule, and deliverables in coordination with project management. 21. Support equipment procurement and technical coordination throughout the project lifecycle. 22. Maintain and update company mechanical, plumbing, and engineering standards and specifications. 23. Participate in the annual refresh of company construction and design standards. 24. Apply lessons learned from completed projects to improve future designs and processes. 25. Collaborate across departments to continuously improve design quality, constructability, and efficiency. 26. Maintain professional conduct and effective communication with all internal and external stakeholders. 27. Report to work on time and maintain an excellent attendance record. 28. Execute all duties and responsibilities in a professional manner. 29. Comply with all company policies, procedures, and the Employee Handbook. 30. Perform other duties as assigned by Engineering Leadership, Preconstruction, or Executive Management.

KGS Group is seeking a Mechanical Engineer to join our growing practice in Bellevue, Washington or Granite Bay, CA. About Us We are KGS Group, an employee-owned, multidisciplinary engineering consulting firm serving clients throughout North America. We're different than traditional engineering firms. We believe a commitment to lasting relationships is just as critical as the expertise applied in our work. To us that means we put our clients and people first. We have the discipline to consistently deliver KGS Quality, never taking the easy way out. We always look closer and dig deeper. And no matter the project, we care enough to do it right. As an employee-owned company, we're invested in our work and our people. Working with us means you'll be part of some of the most interesting projects up and down the west coast. With the extensive, wide-ranging expertise within our company, you'll have countless opportunities to learn and grow. Many of our core clients operate in the hydropower and water management fields. We are growing our U.S. team to continue to provide our industry-leading services to these clients. As we expand our presence on the west coast, we are looking for strong candidates at all levels to join our team! The Role As a Mechanical Engineer, you will be responsible for providing engineering inputs integral to both small and large-scale hydro and dam projects. You will lead technical teams and mentor junior staff, support production, and coordinate delivery of engineering work products with multi-disciplinary project team members and external stakeholders. You will not only support and help grow the broader engineering team capabilities, but your particular focus will be on continuing the development of our hydropower capabilities and working with key staff in growing the business. You'll also be involved in supporting project management duties, coordinating with internal and external clients as well as assisting with guiding and mentoring other engineers within the team. In this role you will lead teams conducting technical work involving turbines, generators, and their associated ancillary systems, as well as other balance of plant systems such as gates, hoists, cranes, pumping systems, lubrication systems, and other critical equipment at hydroelectric powerplants. You will lead teams conducting technical work for feasibility studies, engineering designs, preparation of construction drawings and specifications, and carrying out site visits and inspections. You will be working in a collaborative environment with a great team of engineers, technicians, scientists, and other industry-leading peers, and you will also interface directly with clients. Key Responsibilities: Design modifications to, or entirely new, mechanical systems related to dams, control structures, water retaining structures, and hydroelectric generating stations. Execute multiple projects from the proposal stage through to completion. Projects will include a variety of small to large projects involving water resources, flood control, and hydroelectric sectors. Conduct site investigations, condition assessments, and provide design and construction support. Mechanical engineering design and refurbishment of cranes, hoists, hydroelectric turbines, generators, and other balance of plant systems. Conduct feasibility studies for proposed designs and assess costs and benefits for alternatives in a systematic and thorough manner. Preparation and review of reports. Work collaboratively with other disciplines to execute project deliverables, as well as ensure that quality objectives, schedules, and budgets are met. Edit and prepare design specifications. Contribute to the development of the hydro-mechanical practice at KGS by assisting the US mechanical design lead by documenting technical knowledge, improving internal production processes, coordinating and developing internal training content, and other tasks. Perform other duties as assigned. About You To fill the role, we're looking for an applicant to bring forward a good mix of qualifications and previous experiences. Some highlights should include: Minimum of a Bachelor of Science (BS) in Mechanical Engineering from an ABET accredited university. A post-graduate degree would be an asset. Minimum of 7-15 years of experience in mechanical engineering. Must be registered as a Professional Engineer (P.E.) in Washington, Oregon, or California, as well as eligible for registration as a professional engineer in other states by comity through NCEES; or, if not already registered as a PE, would be able to obtain licensure within 1 year from date of hire. Previous consulting experience is preferred, but not required. Excellent verbal and written communication skills are required. Must be self-motivated, and able to work independently with minimal supervision and manage several projects simultaneously. Travel to project sites is usually limited but will be required at times depending on project/client requirements. The amount of travel time desired by our employees can usually be accommodated. Must possess a valid driver's license and the ability/willingness to undergo security clearance checks. Client interaction: must be able to effectively assume a lead role as project engineer at project meetings and communicate project and technical information. Demonstrated experience in site investigations, condition assessments, design, and construction support are preferred. The salary range for this position is $110,000-$160,000 Please note that the salary range mentioned in this job description should serve simply as a guide. The final compensation offered may vary based on a variety of factors, including candidate's experience, skills, and location. KGS Group is committed to providing a fair, equitable, and competitive package that reflects the value an individual brings to the organization. KGS Group is an employee-owned equal opportunity company offering an excellent compensation and benefits package. KGS Group welcomes and encourages applications from people with disabilities. Upon request, KGS Group will provide reasonable accommodation for disabilities to support participation of candidates in all aspects of the recruitment process. *Please help us learn more about you, your professional goals, and why this job is a good fit for you by submitting a cover letter along with your resume. We highly encourage all applicants to provide a cover letter.*

Job Responsibilities: The Project Engineer at FLINT supports the Project Manager and Project Superintendent to facilitate a well-managed project. The Project Engineer assists with the overall management and administration of projects including pre-construction services, estimating, subcontractor management, RFIs, submittal process, CORs, and SCOs. Responsibilities include: Drafting and reviewing subcontracts and purchase orders Thoroughly reviewing project documents and familiarizing with project participants Representing the company in project meetings Determining submittal requirements and maintaining the submittal log Assisting in developing and maintaining project schedules Conducting regular site visits to ensure proper construction and adherence to schedule Administering As-Built drawings Handling project correspondence and documentation Obtaining necessary permits and ensuring timely receipt of record documents Assisting in administering the Punch List Performing additional duties as assigned Job Requirements, Qualifications, Characteristics: FLINT is seeking an experienced Project Engineer with 1+ years of experience to perform project management functions on small projects ( Good grasp of construction terminology and activities Understanding of all trades including MEP and building permit process Ability to estimate CORs, assist in bidding, and assemble project estimates Familiarity with cost control and management processes Basic understanding of prime contract types and delivery methods Proficiency in project documentation, scheduling, safety practices, and technology tools (Fieldview, Viewpoint, Team VPT1, Bluebeam, Pype, GCPay, P6, and Vista) Skills in business development and maintaining customer relations Understanding of fee enhancement, risk mitigation, and client management Ability to mentor team members and promote teamwork and cooperation

Before applying for this job, please read description in its entirety and if you are qualified and interested, follow the directions below on how to apply. This position is located in Roseville, CA. No relocation package is provided for non-local candidates. Harris & Bruno International is looking for a Manufacturing Engineer to work in a high pace manufacturing environment. This individual will be expected to: Carry out process improvement, problem resolution, project management and employee training. Improve manufacturing processes and methods for cost reduction, quality improvement and efficiency. Prepare and present plans and coordinate deployment including training of team. Designs, develops, and tests and/or sources and cost-justify various tools, machinery and equipment for recommended manufacturing methods. Assist in improving production control, standard operating procedures, safety, quality control and training. Perform research, design, and development of manufacturing processes including production flow, assembly methods and production equipment. Prepare and maintain detailed layouts of building and equipment. Coordinate the manufacturing launch of new/revised products including establishing goals, training team members and evaluating results. Perform product/process analysis for cost reduction, quality improvement, and improved efficiency. Represent manufacturing on cross functional teams. Maintain product and company reputation by complying with government regulations. Benefits Package Includes: Medical Dental Voluntary Vision Company provided life insurance with the option of additional voluntary life insurance. 401k with employer match. Robust PTO policy beginning with 3 weeks earned the first year. Paid holidays. Knowledge/Skills: Technical Capacity. Proficient at problem solving and analysis. Leadership. Communication proficiency. Education/Experience: Bachelor degree in Engineering required. 3 or more years' experience as a Manufacturing Engineer. Experience with 3-D Modeling Harris & Bruno International is a stable company that has been in business since 1948. We are experiencing regular, steady growth in our core and developing product lines. We enjoy a strong presence in the rapidly expanding commercial printing market supporting customers who package products that you use every day.

The Truckee area Project Engineer is responsible for ensuring administrative, contractual, financial and technical aspects of the assigned project(s) being executed. Project Engineer will be reporting to the Project Manager and/or Superintendent. Job Responsibilities includes (but may not be limited to): Assists Project Manager and Superintendent in the management of construction projects, which involves cost control, expediting, quantity take-off, scheduling and safety. Develop peer constructability review of design documents. Develop, input and update project schedule as directed. Assist with the coordination, development and accuracy of the project estimate, budget, revisions, cost coding, and prepare cash flow charts. Analyze changes to contract documents, i.e. Owner Change Order Requests (CORs), Subcontractor Change Orders (SCOs). Review revised cost reports with Project Manager and assist in establishing final costs. Attend and participate in monthly job reviews. Work with Project Manager to perform a thorough and objective bid analysis using all applicable components. Prepare subcontractor Schedule of Values and monthly owner billings with Project Manager and Project Superintendent. Other duties upon request. Qualifications: 3 years of experience as a Project Engineer in commercial construction industry. Bachelor's degree in Construction Management of Engineering or related field. Proficient computer skills in Microsoft Office Suite, Project Management software (Viewpoint or similar) and Scheduling software (Primavera or similar). Apply a complete and proficient understanding of construction management, engineering, safety, scheduling, estimating, budgets, costing and procurement. Analyzing and interpreting data. Effective verbal and written communication skills. Multi-tasking in a fast paced environment. Strong leadership, detail oriented, problem solving, initiative and teamwork. Proven ability to fulfill project development to project closeout responsibilities Working Conditions: Duties required physical abilities such as repetitive hand/finger motions, arm extensions, sitting, standing, and walking jobsites that include uneven and changing site conditions. As well as climbing stairs and ladders, etc. The individual is required to occasionally move around the office and constantly operate a computer and other office machinery, etc. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential job functions. Level 10 Construction is an Equal Opportunity Employer M/F/Disability/Veterans. All applicants applying must be authorized to work in the United States.

Project Engineer (Construction - Concrete Subcontractor) Job Type: Full-time Pay Range (Annualized): $60,000 - $90,000 per year. About the Role We are a concrete subcontractor seeking a Project Engineer to support our Project Management team based in our Rancho Cordova office. This role helps keep projects organized, documented, and moving-supporting communication, implementing document controls, evaluating change order requests and submittals of shop drawings, reviewing project schedules, etc. This position is ideal for someone looking to build or continue a career in construction management. What You'll Do Develop a full understanding of the scope and interdependence of all contract documents. Handle and submit Daily job reports, RFI's, and submittals. Manage effective document control mechanisms for the project to ensure that work is performed in accordance with contract documents. Evaluate change order requests including design changes, specifications and drawing releases and reports status. Evaluate submittals of shop drawings, material data and samples and take appropriate action based upon contract specifications. Review the project schedule and assist the project manager in the maintenance of it as requested. Assist the project manager in the maintenance of effective cost control mechanisms for the project. Complete project close out requirements in accordance with contract documents. Administer quality control program as outlined in the project procedures manual. Become familiar with safety requirements of the project and monitors compliance. Utilize safe work practices and follow directives, policies, and procedures for assisting and maintaining a healthy and safe work environment. Execute additional duties and responsibilities as assigned. What We're Looking For Ability to prioritize multiple tasks and adapt to changing requirements and priorities. A self-motivated and proactive team player. An organized and detail oriented individual. An skilled communicator who can interact effectively and professionally with all levels of employees, management, vendors, clients, and others. A dedicated team member who is comfortable with traveling, working on active jobsites, and who can work extended hours when required by project schedules or urgent circumstances. Qualifications 1-3 years construction experience. Ability to use a computer. Proficient with Microsoft 365 (Outlook, Word, Excel, etc.) and Bluebeam (or equivalent). Proficiency with PlanGrid or Procore are a plus. High School Diploma/GED required; Construction Management degree preferred Work Environment & Schedule The position reports on-site to an office located in Rancho Cordova, CA. The position requires travel to active construction jobsites as needed or required. Typical office hours are Monday - Friday, 8:00 - 5:00. The working schedule may vary by project needs. The company has an engaging culture and periodically attends or hosts events, on and off site. Benefits Medical, Dental, Vision, and Life Insurance. Employee Assistance Program. Profit Sharing & 401(K) Program. Discretionary Bonus Program. Paid Sick Leave (5 days per year) Paid Vacation Leave (starts at 2 weeks/year) Paid Holidays (9 days per year) Paid Volunteer Day Paid Bereavement Leave Equal Opportunity We are an Equal Opportunity Employer and consider applicants without regard to race, color, religion, sex, gender identity/expression, sexual orientation, national origin, age, disability, veteran status, or any other protected status. Reasonable accommodations are available for qualified individuals with disabilities.

Purpose: The Project Engineer (PE) works with our team of other Engineers, Sales, and field staff to support Maxim's fleet of rental equipment. The PE will assess project lifting requirements and develop accurate technical drawings and supporting documentation for equipment installations and lift plans. The PE's responsibilities include the gathering information needed to produce detailed drawings and specifications, calculate crane and rigging requirements, as well as evaluate the feasibility and details for effective tower crane and hoist installations. Key Duties and Responsibilities: Reviews project drawings and plans to verify designs, perform calculations, and use modeling methods to ensure correct results. Develops crane layout and rigging details for crane lifts in private, commercial, and industrial settings. Liaises with Architects, Engineers, contractors, and Maxim team members to gather product information and to establish the job requirements for the project. Creates and presents structural overviews for upcoming projects and develops reports that include technical details for engineers as well as big-picture analysis. Uses AutoCAD and other drafting software programs to create 2D design documents and 3D models for individual components and overall structural plans according to client needs and project requirements for deliverables. Prepares documentation for customers covering project plans and progress, and other relevant information. Prepares ground bearing pressure calculations for track mounted and outrigger-based cranes. Perform other related duties as assigned or required. Minimum Requirements: Education: Bachelor of Science Degree in Civil or Mechanical Engineering, Naval Architecture, or other related engineering degree. EIT Certificate is preferred. Experience: 0 to 4 years of previous relevant engineering experience. Skills/Knowledge: Moderate level knowledge of applied geometry and statics. Advanced level organizational and problem-solving skills. Advanced level presentation and documentation preparation skills. Moderate level ACAD skills - 3D ACAD skills are preferred. Basic to moderate level knowledge of AISC Steel Construction Code and connection design. Basic to moderate level knowledge of structural analysis techniques. The physical demands described herein are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is frequently required to walk, use hands to finger; handle or feel; and kneel; crouch; or crawl; and talk; or hear; push and/or pull; reach; climb; bend and/or stoop. Specific vision abilities required by this job include close vision, color vision, peripheral vision and depth perception. Limited travel is expected to visit project sites and observe or supervise equipment installations. Maxim is an equal opportunity employer and does not discriminate against employees or applicants for employment based on their race, color, religion, creed, sex, national origin or ancestry, age, sexual orientation, disability, genetic information or veteran status, as those terms are defined under applicable laws, or any other characteristic protected by law.

Meta is seeking a Research Engineer to join our Large Language Model (LLM) Research team. We conduct focused research and engineering to build state-of-the-art LLMs, which we often open-source, like our team's recent Llama 2. We are looking for strong engineers who have a background in generative AI and NLP, with experience in areas like language model evaluation; data processing for pre-training and fine-tuning; responsible LLMs; LLM alignment; reinforcement learning for language model tuning; efficient training and inference; and/or multilingual and multimodal modeling. **Required Skills:** Research Engineer, Language - Generative AI Responsibilities: 1. Design methods, tools, and infrastructure to push forward the state of the art in large language models 2. Define research goals informed by practical engineering concerns 3. Contribute to experiments, including designing experimental details, writing reusable code, running evaluations, and organizing results 4. Adapt standard machine learning methods to best exploit modern parallel environments (e.g. distributed clusters, multicore SMP, and GPU) 5. Work with a large and globally distributed team 6. Contribute to publications and open-sourcing efforts **Minimum Qualifications:** Minimum Qualifications: 7. Bachelor's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience 8. Research experience in machine learning, deep learning, and/or natural language processing 9. Experience with developing machine learning models at scale from inception to business impact 10. Programming experience in Python and hands-on experience with frameworks such as PyTorch 11. Exposure to architectural patterns of large scale software applications **Preferred Qualifications:** Preferred Qualifications: 12. A PhD in AI, computer science, data science, or related technical fields. 13. Master's degree in Computer Science, Computer Engineering, relevant technical field, or equivalent practical experience. 14. First author publications at peer-reviewed AI conferences (e.g., NeurIPS, CVPR, ICML, ICLR, ICCV, and ACL). 15. Direct experience in generative AI and LLM research. **Public Compensation:** $88.46/hour to $257,000/year + bonus + equity + benefits **Industry:** Internet **Equal Opportunity:** Meta is proud to be an Equal Employment Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth, or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability, or other applicable legally protected characteristics. We also consider qualified applicants with criminal histories, consistent with applicable federal, state and local law. Meta participates in the E-Verify program in certain locations, as required by law. Please note that Meta may leverage artificial intelligence and machine learning technologies in connection with applications for employment. Meta is committed to providing reasonable accommodations for candidates with disabilities in our recruiting process. If you need any assistance or accommodations due to a disability, please let us know at accommodations-ext@fb.com.

Benefits: Medical, Vision, Dental, 401K, Life Insurance, Health Savings Account, Costco Membership Reimbursement and 40% off Employee Discount Established in 1979, San Francisco Bay Coffee is a third-generation, family-owned company dedicated to producing exceptional coffee with a strong focus on sustainability and quality. Roasting over 30 million pounds annually, San Francisco Bay Coffee believes that everyone involved in the coffee journey, from farmers to coffee drinkers, should benefit from the process. With a global network of more than 32,000 farmers, San Francisco Bay Coffee sources specialty-grade Arabica beans from around the world to offer a wide variety of products, including its signature OneCup pods and multiple bag sizes across various roast levels. Its products are available at leading retail locations, including club stores, regional and national grocery chains, and online. Since its inception, the company has prioritized eco-friendly farming and responsible sourcing, investing directly in the communities it partners with to preserve tradition, uplift livelihoods, and maintain its reputation for quality and expertise in the coffee industry. Job Summary: The job of a Research & Development Technician II is to assist with functions required to bring new products or materials to Commercialization as well as participate in process improvement endeavors. Responsibilities: Comply with Federal, State, Governmental and or any other appropriate regulatory laws or guidelines Assist with Food Safety issues, scientific and technical developments, and industry codes of practice Ensure standards are met in the areas of Food Safety and Product Quality and especially during the execution of research and product development work. Report Food Safety violations and defective quality Work toward continual improvement of work processes, testing methodology and process control Develop new testing methods as needed to support new products. Train applicable personnel Assist with production line trials Perform the analytical and sensory tests required for developing new products and materials Data input, analysis, and writing of reports Involvement with the five phases of product development Customer sample preparation in support of sales team Comply with all company policies and procedures, demonstrating a strong commitment to Food Safety and Good Manufacturing Practices (GMP) in support of product integrity, operational excellence, and regulatory compliance. Educational/Experience Requirements: High school diploma or GED equivalent Manufacturing environment experience Knowledge of Food Safety Regulations Good interpretive and/or reactive skills Laboratory Experience Location: Lincoln, CA Job Type: Full-time Schedule: Mon-Fri 8:00am - 5:00pm Pay: $26.00 per hour SF Bay Coffee offers its employees full benefits: Medical, Vision, Dental, 401K, Life Insurance, Health Savings Account, 40% off Employee Discount and Costco Membership Renewal EEO Statement All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status. Fair Chance Act San Francisco Bay Coffee will consider qualified applicants with a criminal history pursuant to the California Fair Chance Act. You do not need to disclose your criminal history or participate in a background check until a conditional job offer is made to you. After making a conditional offer and running a background check, if San Francisco Bay Coffee is concerned about conviction that is directly related to the job, you will be given the chance to explain the circumstances surrounding the conviction, provide mitigating evidence, or challenge the accuracy of the background report. Find out more about the Fair Chance Act by visiting the Civil Right's Department Fair Chance Act | CRD (ca.gov) webpage.

Job DescriptionR&D Technician Tri Tool is a global leader in the design of high-performance machine tools. More importantly, we design solutions and are problem solvers. We are uncompromising in our dedication to our clients' success and operate with leadership, partnership, and performance at the forefront of every mission. For more than 50 years, we have partnered with companies in major industrial markets-aerospace, government and defense, life sciences, power generation, oil and gas, and semiconductor-to design, develop, and manufacture precision machining and custom engineered tools that increase productivity, optimize costs, and accelerate delivery. The Opportunity: The R&D Technician supports Tri Tool's manufacturing and product development activities by assisting in the assembly, testing, evaluation, and organization of custom and prototype machine tools. Working under general direction and in collaboration with engineering, senior technicians, production planning, and manufacturing teams, this position ensures timely execution of build and test deliverables. The role requires a self-motivated individual with strong hands-on aptitude, attention to detail, and the ability to work independently while following verbal instructions and written documentation. Our Compensation and Benefits show how much we value our team: Starting Pay Range $20.00 - $28.00 per hour, depending on experience Medical/ Dental/ Vision 401K Paid Holidays/Vacation/ Paid Sick Leave Schedule Monday - Friday, full time hours Qualifications: MINIMUM QUALIFICATIONS: High School Diploma or GED required. Minimum one (1) year of experience in a manufacturing, warehouse, technical service, or similar environment. Hands-on experience with mechanical, hydraulic, and/or pneumatic assembly preferred. Ability to read and follow basic written and verbal instructions. Basic manual machining experience or training preferred. Ability to communicate clearly and professionally verbally and via email. Demonstrated ability to work safely with good judgment and appropriate PPE usage. Strong interpersonal skills with the ability to work collaboratively across teams. Authorized to work in the U.S. without sponsorship. EDUCATION REQUIREMENTS: High School Diploma or GED CERTIFICATES OR LICENSES REQUIRED: The following licenses or certificates may be required depending on local, state and/or contract requirements: Valid Driver's License PHYSICAL REQUIREMENTS: Employees must have the ability to perform the following physical demands for extended periods of time with or without assistance: Regularly required to stand, walk, sit, stoop, squat, reach, and use hands to handle tools and components. Ability to lift/move up to 50 lbs. unassisted. Ability to use powered and non-powered hand tools and production equipment safely. Ability to wear required PPE. Ability to use office equipment including computers, phones, scanners, and printers. No phone calls or contact from recruiters please. Powered by JazzHR uDin7Syz92

Performs a variety of engineering duties to support manufacturing operations. Improves products, processes and applications to meet agreed-upon objectives. May redesign products to meet cost objectives, obsolescence and customer requirements. Participates actively in new product introduction, including influencing the design of the product and/or process to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes, scale-up, and managing the transition into production. Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product. In a process environment, interfaces with the chemical development lab and production to ensure small-scale development activities will scale to manufacturing equipment and systems. Coordinates the revision of standard operating procedures (SOPs) as required to support the transfer. Partners with procurement, external vendors and customers to improve/sustain products and processes to meet production timelines, quality policies, and customer expectations. Utilizes digital solutions to optimize and maintain state of the art manufacturing processes. May direct the work of third-party vendors and/or partners to meet contract specified deliverables, performance or business objectives. May work with suppliers to ensure achievement of goals for cost, quality and delivery of parts and materials. May identify and manage ERP data such as bill of material and routing. May be responsible for designing, developing and enhancing microarray fabrication devices/equipment, processes and handling systems. May be responsible for scripting software code used in manufacturing tests or to program an instrument used for production of a product. May be required to use continuous improvement methodologies and understand quality regulations related to the life science industry. May be responsible for one or more of the following roles: Materials engineer: Applies knowledge of materials science to collaborate with and provide consulting to R&D, procurement and manufacturing engineering in the research, specification, sourcing and qualification of materials used in the design and production of Agilent products. Plans, evaluates and recommends technical, quality and cost specifications to meet design and business growth objectives and supply chain optimization. Identifies and qualifies alternative materials when needed. Work with suppliers to clarify specifications to meet quality, cost and manufacturability goals. Fabrication manufacturing engineer: Designs, develops and enhances microarray fabrication devices/equipment, processes and handling systems. Monitors fabrication processes for consistency in yield performance and machine uptime and establishes clear guidelines for equipment operating limits. Modifies processes and equipment as needed to improve control, quality, production output and machine uptime. Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. Analyzes automated tool and QC data to determine root cause of production or quality issues. Manufacturing machine controls software engineer: Provides software solutions in manufacturing fabrication environment. Designs and maintains software code for operating systems or applications for operating automated manufacturing equipment or devices to enable high-throughput, high-quality production of company products. Resolves issues to ensure uninterrupted demand fulfillment. Manufacturing data management and analytics engineer: Defines, develops, improves, supports and implements in house and commercial software solutions to support the manufacturing of products in a cost-effective and compliant manner. Participates in the definition of processes and solutions to provide software-based support for manufacturing operations. Supports and implements the transition of software solutions from requirements to full production through the entire life cycle of the software use. Provides and supports an infrastructure to run the software needed for manufacturing. Defines and recommends appropriate software solutions for manufacturing scenarios. Performs validations and associated activities for all software and technical based solutions. Develops and delivers reporting, analytics and database solutions. Qualifications Bachelor's or Master's Degree or equivalent. Post-graduate, certification and/or license may be required. 4+ years relevant experience for entry into this level. Additional Details This job has a full time weekly schedule. Applications for this job will be accepted until at least January 21, 2026 or until the job is no longer posted.The full-time equivalent pay range for this position is $110,424.00 - $172,538.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit *************************************** Required: OccasionalShift: DayDuration: No End DateJob Function: Manufacturing

Brainlab revolutionized digital medical technology with the introduction of software for radiosurgery and surgical navigation. Today, Brainlab is an industry leader in digital surgery, radiotherapy and integrated operating rooms. Serving physicians, medical professionals and patients in 6,000+ hospitals in 121 countries, we're transforming healthcare to improve the lives of patients everywhere. We employ over 2,000 people in 25 locations worldwide. Close-knit teams made of talented, curious and authentic people are working together toward a common goal. Together we're dedicated to making an impact. Sound like you? Join and grow with us. Provide on-site consulting and guidance to physicians and Operating Room (OR) personnel by evaluating options and problem-solving during surgery in order to maximize Image Guided Surgery (IGS) efficiency and usage. Analyze and resolve regional system issues through detailed analysis and utilization of critical thinking via technical training & documentation. Act as regional escalation point and escalate issues in a timely manner. Educate/train physicians and hospital personnel, including OR staff, Radiology, Central Sterile Processing, Biomedical and Information Technologies staff, on the use of IGS products and services. Utilize expertise and customer's feedback to provide plans to improve the quality improvement process. Act as primary customer liaison, maintaining and managing site visits and regular contact with customers, assessing satisfaction and usage levels, and working to increase revenue via the sale of service contracts, spare/wear parts, upgrades, etc. Collaborate and strategize with the Account Managers in your region, evaluating customer situations, open sales projects, and identifying and referring sales leads. Leverage technical expertise to distribute knowledge throughout the team. Manage knowledge transfer of new developments regarding Brainlab and competitive IGS products and services via ongoing training and individual research and analysis. Promote Brainlab Support best practices and identify & rectify knowledge gaps within the team. Promote IGS products and services to surgeons at trade shows, including the development of reference sites. Report and document complaints per Complaint Handling Standard Operating Procedure (SOP). Salary Range 70-90K. Notwithstanding the foregoing, nothing in this job description alters your at-will employment status. Additional duties may be assigned in the discretion of Brainlab. Qualifications B.S. in Biomedical Engineering, Biomechanical Engineering, Bioengineering, Clinical Engineering, Nursing or equivalent experience. 1-3 years minimum of experience in a technical support role for a healthcare company or provider preferred. 1-2 years minimum customer service experience preferred. Knowledge of surgical procedures, anatomy and medical terminology preferred. Proficient in the use of PC software applications including Microsoft Office. Self-motivated, detail oriented and a proven history of ability to make independent decisions. Additional Information In return for the experiences listed above we will provide a business casual environment, competitive compensation package including medical, dental, life, LTD, STD, and matching 401k benefits and much more. Visit us at: **************** Brainlab, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Brainlab participates in E-Verify, more information can be found here. To also review the EEO Law Poster, please click here. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request to ******************.

**Be visionary** Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research. We are looking for individuals who thrive on making an impact and want the excitement of being on a team that wins. **Job Description** **Lead innovation in materials and processes for mission-critical technology.** Teledyne Microwave Solutions has over 50 years of experience delivering advanced microwave/RF components and integrated assemblies for aerospace, defense, and communications. Our products power applications in aviation, radar, Satcom, space, and electronic warfare. If you're passionate about materials science and process reliability, this role is for you. **What you'll do** + Identify, standardize, and qualify metals, polymers, and ceramics for new and existing products + Conduct material compatibility and performance testing under diverse conditions + Develop and refine manufacturing processes such as brazing, welding, heat treatment, plating, and surface finishing + Implement process controls and statistical methods (SPC, DOE) for repeatability and reliability + Lead root cause investigations for material or process-related failures and recommend corrective actions + Create and maintain technical documentation including process specifications and qualification reports + Ensure compliance with industry standards (ASTM, ISO, ASME) and regulatory requirements + Collaborate with design, electrical, mechanical, and quality teams to support development and production **What you need** + Strong understanding of material properties and selection criteria (required) + Experience with brazing, welding, and heat treatment processes (required) + Knowledge of statistical process control and design of experiments (required) + Ability to conduct root cause analysis and implement corrective actions (required) + Familiarity with ASTM, ISO, and ASME standards (required) + Master's degree in Materials Science, Mechanical, or Chemical Engineering with 2-5 years experience, or Bachelor's with 5-7 years (required) + Lean Six Sigma experience (advantage) + Must be a U.S. citizen and able to obtain and maintain a government security clearance (required) **What we offer** + Competitive pay and comprehensive health benefits + 401(k) with company match and retirement plans + Paid time off and flexible work arrangements + Professional development and training opportunities + Employee wellness programs and assistance resources + A collaborative environment working on mission-critical technology **What happens next** Apply online through Teledyne's careers page. If your qualifications align, our team will contact you for interviews and guide you through the clearance process. _Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Employment is contingent on background checks and compliance with applicable regulations._ **Salary Range:** $113,600.00-$151,400.000 **Pay Transparency** The anticipated salary range listed for this role is only an estimate. Actual compensation for successful candidates is carefully determined based on several factors including, but not limited to, location, education/training, work experience, key skills, and type of position. Teledyne and all of our employees are committed to conducting business with the highest ethical standards. We require all employees to comply with all applicable laws, regulations, rules and regulatory orders. Our reputation for honesty, integrity and high ethics is as important to us as our reputation for making innovative sensing solutions. Teledyne is an Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age, or any other characteristic or non-merit based factor made unlawful by federal, state, or local laws. You may not realize it, but Teledyne enables many of the products and services you use every day **.** Teledyne provides enabling technologies to sense, transmit and analyze information for industrial growth markets, including aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, energy, medical imaging and pharmaceutical research.

Plans, directs, coordinates, and performs a wide variety of duties in the determination, implementation, optimization, and continuous improvement of new and existing manufacturing processes. Emphasis will be upon the design, fabrication, and implementation of automated and semi-automated processes ESSENTIAL JOB FUNCTIONS Identify and implement new automated processes into manufacturing Develop new processes or improve existing processes and layouts to improve process capability, yield, ergonomics, safety, reliability, and quality Analyze existing processes and implement modifications to reduce costs through improved manufacturability and process ability, efficiency, simplification, and standardization Troubleshoot product, facility, equipment, process, and quality problems and design and implement appropriate solutions Develop and write operation and maintenance instructions and manuals Maintain reliable and consistent attendance, including being punctual and dependable, in order to meet the needs of the department and the organization. Execute each essential duty satisfactorily in order to perform the job successfully. Follows all safety procedures required in the work area, wears PPE as needed, attends all safety meetings, and reports safety issues regarding equipment or unsafe/hazardous conditions. Performs effectively as a team member, able to work well with others, open to receiving and giving feedback, and treats everyone with respect. Takes ownership of own work and behavior, accepts accountability for own actions, encourages solutions, and communicates status of work/projects. Follow all department quality standards/criteria. Raise concerns and issues to the immediate manager. Able to understand and demonstrate the Cambro company culture, display the company's core values (Safety, Quality, Respect, and Service). Understands the department's key performance indicators and contributes to achieving these goals both individually and as a team. Other duties as needed or required. ADDITIONAL RESPONSIBILITIES Must be able to work overtime as needed, remain flexible and open to possible schedule changes in order to meet business needs. Hot Stamp design, process, and Hot stamp fixture design QUALIFICATIONS The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Bachelor of Science degree in Mechanical, Manufacturing, Automation, or Industrial Engineering or verifiable experience and vocational training in automation applications Minimum 7+ years of manufacturing engineering experience. Ability to apply concepts of advanced math and geometry, including statistics. Must be able to analyze and make decisions based on collected data. 2D or 3D drawing capability for automated equipment design on AutoCAD or SolidWorks is Basic knowledge and understanding of most industrial codes required (ANSI, ADA, OSHA, NEC, NFPA, IBC, ISO, DIN) Ability to design and write electrical schematics Ability to design, fabricate, and wire electrical control panels Familiarity with Microsoft Word, Excel, Project, and PowerPoint. Ability to create and edit text documents, spreadsheets, presentations, and schedules Digital photography and file manipulation of digital images experience Working knowledge of pneumatic control circuits and electro-pneumatic troubleshooting, electrical control panel assembly and wiring, electrical control circuit design and troubleshooting, Ability to manage multiple conflicting and sometimes changing priorities. Has the ability to adapt quickly to new projects and assignments while being dedicated and an innovative problem solver. Is also a creative thinker who is results-oriented, focused, and attentive to detail and accuracy. PREFERRED QUALIFICATIONS Knowledge of safe operation of conventional mills and lathes for the fabrication of machine components and fixtures. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Sitting, walking, standing, bending at the neck, bending at the waist, squatting, climbing, kneeling, twisting at the neck and waist, repetitive use of hands, simple grasping, power grasping, fine manipulation, pushing and pulling, reaching above and below the shoulder, carrying/lifting up to 50 lbs. Working around equipment and machinery Exposure to excessive noise Exposure to dust, gas, fumes, or chemicals Working at heights Use of special visual or auditory protective equipment PPE Requirements Safety glasses Steel-toe slip-resistant shoes Hearing protection (e.g. earplugs, earmuffs) . COMPENSATION RANGE: $85,000 - $110,000 Salary may vary based on experience. CAMBRO is proud to be an equal-opportunity workplace. All qualified applicants will receive consideration for employment without regard to and will not be discriminated against based upon race, color, religion, national origin, gender, sexual orientation, gender identity, age, physical or mental disability, genetic information, military or veteran status, or other characteristics protected by law.

Chemical Engineer About the Job Thatcher Company is seeking a Process Engineer to join our engineering team in Sacramento, California. In this role, you will provide process engineering and technical support to plant operations, capital projects, and other teams. You will work closely with operations and the business team to identify process improvement opportunities, implement plant improvement projects, and drive innovative solutions. What You Will Do * Promote understanding and application of safety practices. * Optimize plant production and efficiency by the implementation of improvement opportunities and management of process constraints. * Work with operations and manufacturing experts to resolve technical issues. * Develop and maintain process documentation and safety information such as P&IDs, material balances, equipment datasheets, process line sizing calculations, hydraulic calculations and datasheets for instruments and relief devices. * Contribute to process safety and environmental performance through participation in process hazards analysis (PHA), management of changes (MOC), and incident investigation. * Manage small capital projects from design through startup.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Manufacturing Engineer II position is located in Dixon, IL. This position participates in and contributes to process and product modifications, standards, and improvements. The Engineer II position utilizes knowledge of manufacturing equipment and processes to develop expertise in increasing product quality, output, and cost effectiveness. You will utilize lean tools and thinking in improving value streams, conduct workflow analysis, and lead process improvement and change within the organization. Qualified candidates must be able to work an on-site schedule at our Dixon, IL facility. Role Responsibilities: * Supports the appraisal of new product ideas to determine their potential to address customer needs and to achieve goals in revenue growth and market share. * Designs, analyzes, tests, and integrates components to produce final designs; and evaluates the design's overall effectiveness, cost, reliability, and safety. * Develops, executes, and evaluates fitness for use testing, product specifications, and process validation plans. * Works in cross-functional teams and is responsible for all phases of assigned standard engineering projects, ensuring the successful conclusion of all phases within an appropriate time and at an appropriate cost. * Prepares or secures and reviews cost estimates, completes required cost and equipment information, and writes appropriation requests. * Provides input on technical program objectives and product specifications to meet manufacturing needs. Keeps informed of new or improved designs, methods, and techniques, materials, and other advances in engineering technology. * Provides technical support and collaboration to manufacturing, production, and clients through customer visits and/or consultations; ensures product design meets manufacturing and/or procurement requirements. * Participates in short-range planning and technical forecasting. Prepare and present technical results and information in a clear and concise manner through drawings, specifications, reports, and oral presentations to meet Company and customer needs. * Ensures compliance with government and organization engineering standards Minimum Qualifications: * Bachelor of Science Degree in Engineering, from an accredited College or University * 3+ years of hands-on experience of industrial manufacturing or engineering Preferred Qualifications: * FAA Certification experience * Experience with Oracle or other ERP systems Annual Salary Range: $71,900 - $91,700. Actual salaries will vary based on several factors including, but not limited to applicable work experience, training, education, performance. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Relocation: This position is not eligible for relocation assistance. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. * International relocation or remote work arrangements outside of the U.S. will not be considered. Key Words: Lean, Manufacturing, Engineering Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Brainlab revolutionized digital medical technology with the introduction of software for radiosurgery and surgical navigation. Today, Brainlab is an industry leader in digital surgery, radiotherapy and integrated operating rooms. Serving physicians, medical professionals and patients in 6,000+ hospitals in 121 countries, we're transforming healthcare to improve the lives of patients everywhere. We employ over 2,000 people in 25 locations worldwide. Close-knit teams made of talented, curious and authentic people are working together toward a common goal. Together we're dedicated to making an impact. Sound like you? Join and grow with us. * Provide on-site consulting and guidance to physicians and Operating Room (OR) personnel by evaluating options and problem-solving during surgery in order to maximize Brainlab product efficiency and usage * Manage and maintain install base, including basic 3rd Party integrations * Analyze and resolve product issues for Brainlab systems at assigned Account(s) via Salesforce through detailed analysis and utilization of critical thinking via technical training and documentation * Utilize engineering expertise to contribute to the quality improvement process by recommending product modifications * Provide clinical case coverage & support for Complex Cases and Go Live launches (based on availability) * Manage the process of driving customer utilization, especially via unique workflows and special applications * Act as escalation point for clinical regional issues * Direct and assist Radiology staff in performing necessary scans prior to surgery * Educate/train physicians and hospital personnel, including OR staff, Radiology, Central Sterile Processing, Biomedical and Information Technologies staff, on the use of Image Guided Surgery (IGS) products and services * Develop and conduct training programs for hospital staff enabling them to implement in-house training * Act as primary customer liaison, maintaining contact with customer, assessing satisfaction and usage levels and providing recommendations on this process * Work with the Application Consultant to increase revenue via the sale of spare parts, upgrades, contract renewal, etc. * Work closely with the Application Consultant, Area Account Manager, and Marketing Manager on market transparency, upgrade initiatives, demo/evaluations, and Research & Development (R&D) projects * Attend meetings and trade shows to demonstrate and promote IGS products and services * Keep abreast of developments regarding Brainlab and competitive IGS products and services via ongoing training and individual research and analysis * Collaborate and strategize with Regional Support Manager to provide regular content for team calls/meetings (e.g. provide clinical knowledge transfer, share best practices, interesting cases or case set-ups, etc.) * Maintain Salesforce documentation of all working hours * Attend IGS Continuing Education annually and maintain annual product certification competency * Travel for 50%+ during first 6 months * Salary Range 65-85K Notwithstanding the foregoing, nothing in this job description alters your at-will employment status. Additional duties may be assigned in the discretion of Brainlab. Qualifications * B.S. in Biomedical Engineering, Biomechanical Engineering, Bioengineering, Clinical Engineering, or Nursing required * 1-3 years minimum experience in a technical support role preferably for a healthcare company or Provider * 1-2 years minimum sales experience with healthcare company preferred * Knowledge of surgical procedures, anatomy and medical terminology preferred * Proficient in the use of PC software applications including Microsoft Office * Self-motivated, detail oriented and a proven history of ability to make independent decisions Additional Information In return for the experiences listed above we will provide a business casual environment, competitive compensation package including medical, dental, life, LTD, STD, and matching 401k benefits and much more. Visit us at: **************** Brainlab, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Brainlab participates in E-Verify, more information can be found here. To also review the EEO Law Poster, please click here. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request to ******************.

* Performs a variety of engineering duties to support manufacturing operations. * Improves products, processes and applications to meet agreed-upon objectives. * May redesign products to meet cost objectives, obsolescence and customer requirements. * Participates actively in new product introduction, including influencing the design of the product and/or process to ensure manufacturability and conformance with the global supply chain, enabling prototyping while in the R&D lab, testing the reliability of prototypes, scale-up, and managing the transition into production. * Supports and implements the transition of products and manufacturing processes from prototype to full production and through the entire life cycle of the product. * In a process environment, interfaces with the chemical development lab and production to ensure small-scale development activities will scale to manufacturing equipment and systems. * Coordinates the revision of standard operating procedures (SOPs) as required to support the transfer. * Partners with procurement, external vendors and customers to improve/sustain products and processes to meet production timelines, quality policies, and customer expectations. * Utilizes digital solutions to optimize and maintain state of the art manufacturing processes. * May direct the work of third-party vendors and/or partners to meet contract specified deliverables, performance or business objectives. * May work with suppliers to ensure achievement of goals for cost, quality and delivery of parts and materials. * May identify and manage ERP data such as bill of material and routing. * May be responsible for designing, developing and enhancing microarray fabrication devices/equipment, processes and handling systems. * May be responsible for scripting software code used in manufacturing tests or to program an instrument used for production of a product. * May be required to use continuous improvement methodologies and understand quality regulations related to the life science industry. * May be responsible for one or more of the following roles: Materials engineer: Applies knowledge of materials science to collaborate with and provide consulting to R&D, procurement and manufacturing engineering in the research, specification, sourcing and qualification of materials used in the design and production of Agilent products. * Plans, evaluates and recommends technical, quality and cost specifications to meet design and business growth objectives and supply chain optimization. * Identifies and qualifies alternative materials when needed. * Work with suppliers to clarify specifications to meet quality, cost and manufacturability goals. * Fabrication manufacturing engineer: Designs, develops and enhances microarray fabrication devices/equipment, processes and handling systems. * Monitors fabrication processes for consistency in yield performance and machine uptime and establishes clear guidelines for equipment operating limits. * Modifies processes and equipment as needed to improve control, quality, production output and machine uptime. * Works with R&D to design, develop and release new tools or process technologies and is a resource for risk assessments and design for manufacturability. * Analyzes automated tool and QC data to determine root cause of production or quality issues. * Manufacturing machine controls software engineer: Provides software solutions in manufacturing fabrication environment. * Designs and maintains software code for operating systems or applications for operating automated manufacturing equipment or devices to enable high-throughput, high-quality production of company products. * Resolves issues to ensure uninterrupted demand fulfillment. * Manufacturing data management and analytics engineer: Defines, develops, improves, supports and implements in house and commercial software solutions to support the manufacturing of products in a cost-effective and compliant manner. * Participates in the definition of processes and solutions to provide software-based support for manufacturing operations. * Supports and implements the transition of software solutions from requirements to full production through the entire life cycle of the software use. * Provides and supports an infrastructure to run the software needed for manufacturing. * Defines and recommends appropriate software solutions for manufacturing scenarios. * Performs validations and associated activities for all software and technical based solutions. * Develops and delivers reporting, analytics and database solutions. Qualifications * Bachelor's or Master's Degree or equivalent. * Post-graduate, certification and/or license may be required. * 4+ years relevant experience for entry into this level. Additional Details This job has a full time weekly schedule. Applications for this job will be accepted until at least January 21, 2026 or until the job is no longer posted. The full-time equivalent pay range for this position is $110,424.00 - $172,538.00/yr plus eligibility for bonus, stock and benefits. Our pay ranges are determined by role, level, and location. Within the range, individual pay is determined by work location and additional factors, including job-related skills, experience, and relevant education or training. During the hiring process, a recruiter can share more about the specific pay range for a preferred location. Pay and benefit information by country are available at: ************************************* Agilent Technologies, Inc. is an Equal Employment Opportunity and merit-based employer that values individuals of all backgrounds at all levels. All individuals, regardless of personal characteristics, are encouraged to apply. All qualified applicants will receive consideration for employment without regard to sex, pregnancy, race, religion or religious creed, color, gender, gender identity, gender expression, national origin, ancestry, physical or mental disability, medical condition, genetic information, marital status, registered domestic partner status, age, sexual orientation, military or veteran status, protected veteran status, or any other basis protected by federal, state, local law, ordinance, or regulation and will not be discriminated against on these bases. Agilent Technologies, Inc., is committed to creating and maintaining an inclusive in the workplace where everyone is welcome, and strives to support candidates with disabilities. If you have a disability and need assistance with any part of the application or interview process or have questions about workplace accessibility, please email job_******************* or contact ***************. For more information about equal employment opportunity protections, please visit ********************************* Travel Required: Occasional Shift: Day Duration: No End Date Job Function: Manufacturing

Brainlab revolutionized digital medical technology with the introduction of software for radiosurgery and surgical navigation. Today, Brainlab is an industry leader in digital surgery, radiotherapy and integrated operating rooms. Serving physicians, medical professionals and patients in 6,000+ hospitals in 121 countries, we're transforming healthcare to improve the lives of patients everywhere. We employ over 2,000 people in 25 locations worldwide. Close-knit teams made of talented, curious and authentic people are working together toward a common goal. Together we're dedicated to making an impact. Sound like you? Join and grow with us. * Provide on-site consulting and guidance to physicians and Operating Room (OR) personnel by evaluating options and problem-solving during surgery in order to maximize Brainlab product efficiency and usage * Manage and maintain install base, including basic 3rd Party integrations * Analyze and resolve product issues for Brainlab systems at assigned Account(s) via Salesforce through detailed analysis and utilization of critical thinking via technical training and documentation * Utilize engineering expertise to contribute to the quality improvement process by recommending product modifications * Provide clinical case coverage & support for Complex Cases and Go Live launches (based on availability) * Manage the process of driving customer utilization, especially via unique workflows and special applications * Act as escalation point for clinical regional issues * Direct and assist Radiology staff in performing necessary scans prior to surgery * Educate/train physicians and hospital personnel, including OR staff, Radiology, Central Sterile Processing, Biomedical and Information Technologies staff, on the use of Image Guided Surgery (IGS) products and services * Develop and conduct training programs for hospital staff enabling them to implement in-house training * Act as primary customer liaison, maintaining contact with customer, assessing satisfaction and usage levels and providing recommendations on this process * Work with the Application Consultant to increase revenue via the sale of spare parts, upgrades, contract renewal, etc. * Work closely with the Application Consultant, Area Account Manager, and Marketing Manager on market transparency, upgrade initiatives, demo/evaluations, and Research & Development (R&D) projects * Attend meetings and trade shows to demonstrate and promote IGS products and services * Keep abreast of developments regarding Brainlab and competitive IGS products and services via ongoing training and individual research and analysis * Collaborate and strategize with Regional Support Manager to provide regular content for team calls/meetings (e.g. provide clinical knowledge transfer, share best practices, interesting cases or case set-ups, etc.) * Maintain Salesforce documentation of all working hours * Attend IGS Continuing Education annually and maintain annual product certification competency * Salary Range 65-85K. Notwithstanding the foregoing, nothing in this job description alters your at-will employment status. Additional duties may be assigned in the discretion of Brainlab. Qualifications * B.S. in Biomedical Engineering, Biomechanical Engineering, Bioengineering, Clinical Engineering, or Nursing required * 1-3 years minimum experience in a technical support role preferably for a healthcare company or Provider * 1-2 years minimum sales experience with healthcare company preferred * Knowledge of surgical procedures, anatomy and medical terminology preferred * Proficient in the use of PC software applications including Microsoft Office * Self-motivated, detail oriented and a proven history of ability to make independent decisions Additional Information In return for the experiences listed above we will provide a business casual environment, competitive compensation package including medical, dental, life, LTD, STD, and matching 401k benefits and much more. Visit us at: **************** Brainlab, Inc. is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to sex, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law. Brainlab participates in E-Verify, more information can be found here. To also review the EEO Law Poster, please click here. If you need assistance and/or a reasonable accommodation due to a disability during the application or the recruiting process, please send a request to ******************.