Research and development engineer jobs in Portland, ME - 140 jobs

Diodes Incorporated is seeking a full-time equipment engineer to join our talented manufacturing team. This position requires a flexible schedule and the willingness to work occasional overtime. You will be responsible for multiple activities with respect to future planning, project execution, maintenance and repair of semiconductor manufacturing equipment. These activities would include deliverables such as troubleshooting and repairs, continuous improvements to help with availability, cost savings and OEE. Good written skills for creating and updating activity checklists, corrective and preventative maintenance procedures, and specification updates, as well as good interpersonal skills to provide clear technician direction and training and present data to management. Must have good project execution acumen, strong semiconductor equipment experience and be comfortable working in a fast-paced manufacturing environment and taking ownership of equipment within your assigned area. Principle Duties and Responsibilities: Working hours: 40-hour work week, Monday through Friday. OT is expected in order to keep your assigned area running as smoothly as possible. Work is performed within a clean room environment that requires the wearing of a smock, hood, booties, latex gloves, and safety glasses. Requires the use of airline respirator. Requires occasional wearing of personal protective equipment including, but not limited to, aprons, gauntlets, and full-face masks. Requires lifting of objects that weigh up to 50 lbs. May require work with hazardous gases, chemicals, and high voltages. Troubleshoot and repair electromechanical systems. Troubleshoot and repair electro-pneumatic systems. Consistently directs one's own work at a high level and demonstrates advanced leadership skills for small teams and is sought out as a subject matter expert for assigned area. Follows procedures without deviation and update them as needed. Discusses repair and maintenance requirements with peers and balances work with available talent. Reviews tool histories for all area tools looking for common themes and proposes improvements / repairs and executes on them. Identifies abnormal tool conditions and execute corrective actions. Has clear technical knowledge of the equipment and its sub-systems within area assigned. Has process knowledge enough to understand recipes and the desired outcomes. Understands and uses SPC charts to identify failure modes. Responsible for the completion of all scheduled and unscheduled preventative maintenance and repair procedures in a timely, accurate, and safe manner within assigned area. A safety-minded approach is required: employees must be able to learn, understand and follow all safety documentation, specs and protocol, including LOTO. Must also be able to identify any/all safety concerns and regulatory violations in order to eliminate them. May possibly be cross trained in other areas as needed Knowledge, Skills and Abilities: Strong electrical/mechanical semiconductor knowledge. Ability to perform He-Leak checks of gas and vacuum systems. Comfort handling chemicals, including acids, bases, and solvents. Experience troubleshooting electrical issues. Experience troubleshooting vacuum systems. Ability to read electrical schematics Ability to use digital multimeters and voltage supplies. Ability to work well in a collaborative environment, and as part of a team. The flexibility to work outside of normal schedule, cross train, (learn more than one job or operation) and multi-task as needed. A BS in Engineering or relevant technical discipline, or Military Equivalent. Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor'sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long-Term disability and standard life insurance policy. We also provide paid time off and an employee wellness program.

IDEXX is looking for an experienced Principal R&D Engineer, Diagnostic Consumables to lead the development of high-volume, single-use consumables for our veterinary diagnostics platforms. In this role, you'll work at the intersection of engineering, life sciences, and manufacturing-collaborating with assay scientists, instrument teams, and external partners to bring innovative, cost-effective products to market. From early material selection to physics-based modeling and USDA-compliant commercialization, your impact will be felt across the entire product lifecycle. What you'll do: Own the technical vision for diagnostic consumables, guiding concept development from material selection through commercialization. Drive advanced modeling and simulation (ANSYS, COMSOL) to establish design principles across fluidic, thermal, and mechanical domains. Shape cross-functional strategy by partnering with assay scientists, instrument engineers, and external vendors to deliver integrated, scalable solutions. Lead design reviews and risk assessments ensuring robust validation strategies and regulatory compliance under USDA standards. Mentor and develop junior engineers, fostering technical excellence and building organizational capability in diagnostic system engineering. Influence long-term roadmaps, contributing to portfolio planning and innovation pipelines that expand IDEXX's diagnostic capabilities. Champion manufacturability and cost-effectiveness, ensuring designs translate seamlessly into high-volume, regulated production environments. Contribute to technical roadmaps and mentor junior team members What you need to succeed: Ph.D. or Master's in Mechanical Engineering, Biomedical Engineering, Materials Science, or related field 8+ years of experience in diagnostic consumables or medical device development Strong proficiency in analytical modeling; SolidWorks experience is a plus Proven success in high-volume, regulated manufacturing environments Excellent communication, leadership, and cross-functional collaboration skills Experience designing and integrating microfluidic systems Familiarity with high-volume web-based manufacturing technologies Track record of developing high-volume assay consumables or diagnostic products What you can expect from us: Salary range starting at $160,000 based on experience Opportunity for annual cash bonus Health / Dental / Vision Benefits Day-One 5% matching 401k Additional benefits including but not limited to financial support, pet insurance, mental health resources, volunteer paid days off, employee stock program, foundation donation matching, and much more If you're looking for a role that'll challenge you, offer a variety of work and learning, while helping an amazing industry, we'd love to hear from you! Why IDEXX: We're proud of the work we do because our work matters. An innovation leader in every industry we serve, we follow our Purpose and Guiding Principles to help pet owners worldwide keep their companion animals healthy and happy, to ensure safe drinking water for billions, and to help farmers protect livestock and poultry from disease. We have customers in over 175 countries and a global workforce of over 10,000 talented people. So, what does that mean for you? We enrich the livelihoods of our employees with a positive and respectful work culture that embraces challenges and encourages learning and discovery. At IDEXX, you will be supported by competitive compensation, incentives, and benefits while enjoying purposeful work that drives improvement. Let's pursue what matters together. About the job location: If you're thinking about relocating for this role, here are a few things to know about living in Maine (often called “Vacationland”). The Westbrook, ME area provides great access to active downtown areas and the outdoors, with the coast and numerous mountains and hiking trails nearby. You'll also find a number of large companies like ours in the area, creating a vibrant work culture. You can learn more on the Portland tourism website: ************************************************************** IDEXX values a diverse workforce and workplace and strongly encourages women, people of color, LGBTQ+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply. IDEXX is an equal opportunity employer. Applicants will not be discriminated against because of race, color, creed, sex, sexual orientation, gender identity or expression, age, religion, national origin, citizenship status, disability, ancestry, marital status, veteran status, medical condition, or any protected category prohibited by local, state, or federal laws. While we appreciate our staffing partners, we are unable to accept unsolicited agency resumes. #LI-CAG

Job Description Sabre Yachts is a leading manufacturer in building Downeast style motor yachts, based in Raymond, Maine since 1970. Sabre has exceptional world-class craftsmen and women in the boat building industry who craft beautiful luxury yachts. Product Engineer Sabre Yachts Raymond, ME | Full-Time | On-Site Position Summary Sabre Yachts seeks a skilled Product Engineer to support the full lifecycle of our premium yachts, from concept development through production and customer delivery. This role serves as a key technical authority, ensuring designs meet our standards for quality, performance, manufacturability, and serviceability. The Product Engineer works cross-functionally with design, production, purchasing, and customer service to deliver engineering solutions that uphold our brand values and meet cost, schedule, and regulatory requirements. Responsibilities Engineering Support development of new and existing models from concept through production release. Create and maintain 2D/3D CAD models, drawings, assemblies, BOMs, and change notices. Collaborate with production to resolve build issues and improve manufacturability. Coordinate prototype builds and sea trials; capture feedback and implement improvements. Provide technical support for warranty, service, and field-related issues. Problem Solving & Improvement Identify and document design or production issues. Apply root-cause analysis and lead cross-functional problem-solving efforts. Implement corrective and preventive actions to improve quality and reliability. Support continuous improvement across models, systems, and processes. Administrative & Facility Support Maintain accurate drawings, reports, and engineering documentation. Manage multiple projects and meet schedule commitments. Support document control, design standards, and engineering systems. Maintain a clean, safe, and organized work area and assist with facility improvement efforts. Qualifications A degree in engineering or industrial design is preferred; however, equivalent technical training or production-focused engineering experience is also accepted. 3+ years of experience in boatbuilding or manufacturing engineering preferred. Proficiency in CAD software (SolidEdge, Rhino, AutoCAD, or equivalent). Strong understanding of marine systems, composites, and production processes. Excellent communication, analytical, and problem-solving skills. Ability to manage multiple priorities in a fast-paced production environment. ABYC Certification or PE licensure is a plus. Additional Requirements Ability to interpret engineering drawings, specifications, and regulatory standards. Strong math and computer skills, including spreadsheets and modeling tools. Ability to maintain confidentiality regarding proprietary product information. The Product Engineer works cross-functionally with design, production, quality control, purchasing, sales & marketing, and customer service. Works under general supervision with expected independent judgment on technical matters.

Change the world. Love your job. In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. Do you want to work for an organization that values your opinion? Do you want to work for an organization where you can play a pivotal role in several different areas? As a Texas Instruments Equipment Engineer, you will have the opportunity to work in a vibrant and dynamic team-oriented environment. Responsibilities include: Evaluate, select, and order equipment that is most appropriate and cost effective for the manufacture of company products Oversee the installation, modification, upgrade and maintenance of manufacturing equipment Keep current on equipment manufacturers' technical notices, upgrades and safety issues Study equipment performance and reliability Establish programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process Provide technical support to the manufacturing equipment repair and process engineering organizations Define and write preventative maintenance schedules Minimum requirements: Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, Chemical Engineering, Mechanical Engineering, Materials Science Engineering, Physics or related engineering degree Cumulative 3.0/4.0 GPA, or higher Preferred qualifications: Knowledge of AMAT PVD and/or AMAT TxZ chambers equipment Knowledge of PVD, CVD, high vacuum and/or ultra high vacuum Knowledge of other equipment (e.g., AMAT, Veeco, TEL, Novellus, and/or ASM) Understanding of tool monitoring and interdiction software, and equipment maintenance and documentation Strong verbal and written communication skills Demonstrated strong analytical, critical thinking and problem solving skills Ability to work in teams and collaborate effectively with people in different functions Ability to take the initiative and drive for results Strong time management skills that enable on-time project delivery Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment Demonstrated ability to build strong, influential relationships

Fast Growth Biotech co is expanding 25% annually. Full benefit and PTO package, modern state of the art facilities. Management support growth + learning for their staff. The Sr. Mechanical Design Engineer is a multi-faceted position with a primary focus on test fixtures, production fixtures, product revision and new product design. You'll work collaboratively with Electrical Engineering and Process Engineering developing designs to support customer orders from concept to completion. The Sr. Design Engineer gets involved in R&D, prototyping, analysis, and applications engineering support. A successful candidate will be an energetic, organized and highly motivated individual with a high level of accountability, who enjoys thriving in a fast-paced environment. RESPONSIBILITIES & DUTIES: Design parts & equipment to meet customer specifications and requirements. Generate 3D models, drawing packages, bills of materials and O&M Manuals. Perform necessary engineering calculations to validate or improve designs. Work collaboratively with electrical engineering and process engineering groups. Participate in new product development. Participate with quality control. EDUCATION/EXPERIENCE: Bachelor's degree in Engineering, preferably Mechanical Extensive experience working in design engineering; high preference for experience in injection molded parts, electro-mechanical design and/or medical industry components Proficiency in 3D CAD, Solidworks or Autocad CORE COMPETENCIES: Strong attention to detail. Aptitude for problem solving.

Operating under the BIW Business Oeprating System (BOS) the Machinery Section Engineer ensures compliance with safety, quality, and performance standards while coordinating with other key stakeholders to meet overall milestones. Key Responsibilities Safety Leadership: * Be a safety leader for your team and ensure that each person leaves in the condition they came in. Ensure all safety trainings are completed on time. Project Execution: * Provide technical, engineering, design and project leadership for main propulsion machinery shipboard equipment and systems (gas turbine engines, propellers, reduction gears, steering gears, shafting, seals and generator sets etc.), associated piping systems & HVAC systems. * Create CAE models that simulate ship system designs, and perform analysis and calculations using CAE applications. * Develop and maintain equipment technical purchase specifications, diagrams and calculations. * Develop, document and present technical position on requirements compliance issues related to design and construction within assigned area of cognizance. * Develop and define ship system engineering requirements and relate them to top level performance requirements. Team Collaboration and Communication: * Interface with customers (Navy, Manufacturing, Detail Design, Procurement, QA, etc) to resolve technical issues, recommend changes and maintain technical documentation. * Support ship construction activities, including ship testing, system activation and sea trials. * Participate on or lead integrated product and process teams. Required/Preferred Education/Training * BS in Mechanical Engineering or Marine Engineering from an ABET accredited university or college required. * MS degree and/or PE license preferred. Required/Preferred Experience * Minimum 8 years (Senior Engineer) / 12 years (Principal Engineer) experience in main propulsion machinery and auxiliary systems required. Shipboard applications preferred. * Excellent written and oral communication skills. * Adept at giving technical presentations at group meetings. * Demonstrated experience to lead technical projects. * Windows and CAE (i.e. Pro/E, Pro/M, FEA, CFD software) experience highly desirable. * Project management and coordination skills: ability to plan, organize and execute projects; ability to handle multiple projects and assignments concurrently. * Must be willing to support occasional company travel. * Must possess, or have the ability to obtain, a Secret level security clearance. * This position requires you to be able to obtain a government security clearance. You must be a US Citizen for consideration and you must be able to obtain an interim security clearance within the first 45 days of hire. For more information regarding the security clearance process, please visit Investigations & Clearance Process (dcsa.mil)

• Document complete process flow of new projects / components including estimated process times. • To generate process files needed to support manufacturing of various parts and components. • To perform mechanical design tasks in CAD as needed for manufacturing, drafting Solid Model parts, tooling, fixture assemblies, and drawings. (Design, Solid Models, Drawings) • To provide engineering support by troubleshooting manufacturing process and machining issues and implementing timely solutions to maintain the continuity of production flow. • To monitor and debug new methods, equipment, and procedures to ensure total system efficiencies. • Ability to generate CNC programs primarily for single & multi-axis lathes, and/or vertical, horizontal, 4 and 5-axis machining centers, with Fanuc and Siemens controls. • Successfully implement self-generated programs, error free code, and meaningful set-up sheets. • Generate ROI calculations and present to supervisor for cutting tool or workholding suggestions. • Project management skills to order cutting tools and fixture components as needed. • Continuous Improvement implementation via self-observations or instructions by others. • Provide SolidWorks and or ESPRIT training and mentoring to associate engineers. Essential Duties and Responsibilities • Responsible for all facets of NPI (new product introduction) and repeat product processes. • Develop and maintain manufacturing plans for new and existing products within the ERP system. • Review engineering documents. (Drawings, CAD-models, MBD/DPD/PMI, Specifications, etc.) • Review changed / revised engineering documentation for manufacturability and engineering changes for impact to fixture and process. • Create Solid Models & CAD drawings for inspection, manufacturing process, fixtures, tooling, assembly, other parts related devices, workstations, etc. Extracting MBD/DPD/PMI model data. (ie: SolidWorks) • Create CNC Machine Programs & Process Documentation (NC code, setup sheets, tool list, process info, In-Process inspection, etc.). (ie: ESPRIT CAM, Excel) • Provides constant communication between Engineering and Operations. • Support Operations by providing technical support, interpretation, and engineering data. • Support Engineering by providing feedback, data, and other information needed to process parts. • Support startup of new products, coordinate & support other departments and team members. • Review and recommend improvements to manufacturing processes. • Identify need for established work procedure and standardized method. • Document and communicate work procedure and standardized methods as needed. • Identify need for training and communicates need to appropriate manager. • Consult with supervisors, engineers, programmers, and manufacturing to gather information about process intent to provide proper support needed. Page 2 of 3 Other Tasks • Provide estimated manufacturing process and times to aid in quoting new & existing product, including DFM (Design for Manufacturability) feedback to customers. • Support customer visits through engineering expertise and project involvement. • Perform other duties as assigned. Required Education and/or Experience • Associate Degree in Manufacturing Technology / Mechanical Engineering or related field, OR High school diploma with equivalent combination of education and manufacturing experience. • 2+ years of experience or training certification with CAD software (ex: SolidWorks/AutoCAD). • 2+ years of experience or training certification with CAM software (ex: ESPRIT/MasterCam). • 2+ years of work experience in CNC machining/manufacturing on 3-axis verticals and/or lathes. • 2+ years of work experience developing manufacturing processes and routing into an ERP system. • Working knowledge of MS Office Excel, Outlook, Word, OneDrive, BOX, Adobe Acrobat, & ERP systems. • Experience with the business side of operation (quoting, customer relations, production planning, etc.) • On the job training/growth will be provided for motivated applicants. Required Skills, Certifications, etc. • Self-Starter / Self-Motivated / Flexible / Detail-Oriented. • Reliable and dependable. • Ability to work in a team environment and organize and document data for others to use. • Accurate and thorough with strong attention to detail; monitors own work to ensure quality. • Positive internal and customer focused attitude. • Works well in a fast paced and rapidly changing environment. Language Skills • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedures, drawings, and customer and industry specifications. • Ability to speak effectively before groups of customers or employees of organization. • Ability to communicate well with others internally / externally, written and verbal. Mathematical Skills • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. • Ability to calculate machining cycle times and run rates in various time formats. Preferred Skills, Certifications, etc. • Experience working with an ERP system to enter Job Routers and maintain templates for repeat orders. • Working knowledge of services such as Heat Treating, Plating, Cleaning, & Non-Destructive Testing. • Experience with reading and applying customer & product specifications for manufacturing. • A good understanding to apply GD&T tolerancing and digital MBD/DPD/PMI data to drawings. • Experience in various machining processes for a wide range of materials from Aluminum to Inconel. • Mechanical Inspection skills using various inspection equipment, height gages, and CMM's. • Working with Aerospace parts, special alloys, close tolerances • Operate and/or program 5-Axis Machines and Mill-Turn Machines. Page 3 of 3 Physical Demands • Depending on the assignment, may require ordinary ambulatory skills sufficient to visit other locations; or the ability to stand, walk and manipulate (lift, carry, move) light to medium weights of 10-50 pounds. Requires good hand-eye coordination, arm, hand, and finger dexterity, including ability to grasp, and visual acuity to use a keyboard, operate equipment, and read technical information. ADDITIONAL NOTES ALIGN PRECISION is an Equal Opportunity Employer and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN PRECISION are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

• Document complete process flow of new projects / components including estimated process times. • To generate process files needed to support manufacturing of various parts and components. • To perform mechanical design tasks in CAD as needed for manufacturing, drafting Solid Model parts, tooling, fixture assemblies, and drawings. (Design, Solid Models, Drawings) • To provide engineering support by troubleshooting manufacturing process and machining issues and implementing timely solutions to maintain the continuity of production flow. • To monitor and debug new methods, equipment, and procedures to ensure total system efficiencies. • Ability to generate CNC programs primarily for single & multi-axis lathes, and/or vertical, horizontal, 4 and 5-axis machining centers, with Fanuc and Siemens controls. • Successfully implement self-generated programs, error free code, and meaningful set-up sheets. • Generate ROI calculations and present to supervisor for cutting tool or workholding suggestions. • Project management skills to order cutting tools and fixture components as needed. • Continuous Improvement implementation via self-observations or instructions by others. • Provide SolidWorks and or ESPRIT training and mentoring to associate engineers. Essential Duties and Responsibilities • Responsible for all facets of NPI (new product introduction) and repeat product processes. • Develop and maintain manufacturing plans for new and existing products within the ERP system. • Review engineering documents. (Drawings, CAD-models, MBD/DPD/PMI, Specifications, etc.) • Review changed / revised engineering documentation for manufacturability and engineering changes for impact to fixture and process. • Create Solid Models & CAD drawings for inspection, manufacturing process, fixtures, tooling, assembly, other parts related devices, workstations, etc. Extracting MBD/DPD/PMI model data. (ie: SolidWorks) • Create CNC Machine Programs & Process Documentation (NC code, setup sheets, tool list, process info, In-Process inspection, etc.). (ie: ESPRIT CAM, Excel) • Provides constant communication between Engineering and Operations. • Support Operations by providing technical support, interpretation, and engineering data. • Support Engineering by providing feedback, data, and other information needed to process parts. • Support startup of new products, coordinate & support other departments and team members. • Review and recommend improvements to manufacturing processes. • Identify need for established work procedure and standardized method. • Document and communicate work procedure and standardized methods as needed. • Identify need for training and communicates need to appropriate manager. • Consult with supervisors, engineers, programmers, and manufacturing to gather information about process intent to provide proper support needed. Page 2 of 3 Other Tasks • Provide estimated manufacturing process and times to aid in quoting new & existing product, including DFM (Design for Manufacturability) feedback to customers. • Support customer visits through engineering expertise and project involvement. • Perform other duties as assigned. Required Education and/or Experience • Associate Degree in Manufacturing Technology / Mechanical Engineering or related field, OR High school diploma with equivalent combination of education and manufacturing experience. • 2+ years of experience or training certification with CAD software (ex: SolidWorks/AutoCAD). • 2+ years of experience or training certification with CAM software (ex: ESPRIT/MasterCam). • 2+ years of work experience in CNC machining/manufacturing on 3-axis verticals and/or lathes. • 2+ years of work experience developing manufacturing processes and routing into an ERP system. • Working knowledge of MS Office Excel, Outlook, Word, OneDrive, BOX, Adobe Acrobat, & ERP systems. • Experience with the business side of operation (quoting, customer relations, production planning, etc.) • On the job training/growth will be provided for motivated applicants. Required Skills, Certifications, etc. • Self-Starter / Self-Motivated / Flexible / Detail-Oriented. • Reliable and dependable. • Ability to work in a team environment and organize and document data for others to use. • Accurate and thorough with strong attention to detail; monitors own work to ensure quality. • Positive internal and customer focused attitude. • Works well in a fast paced and rapidly changing environment. Language Skills • Ability to read and interpret documents such as safety rules, operating and maintenance instructions, procedures, drawings, and customer and industry specifications. • Ability to speak effectively after groups of customers or employees of organization. • Ability to communicate well with others internally / externally, written and verbal. Mathematical Skills • Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. • Ability to calculate machining cycle times and run rates in various time formats. Preferred Skills, Certifications, etc. • Experience working with an ERP system to enter Job Routers and maintain templates for repeat orders. • Working knowledge of services such as Heat Treating, Plating, Cleaning, & Non-Destructive Testing. • Experience with reading and applying customer & product specifications for manufacturing. • A good understanding to apply GD&T tolerancing and digital MBD/DPD/PMI data to drawings. • Experience in various machining processes for a wide range of materials from Aluminum to Inconel. • Mechanical Inspection skills using various inspection equipment, height gages, and CMM's. • Working with Aerospace parts, special alloys, close tolerances • Operate and/or program 5-Axis Machines and Mill-Turn Machines. Page 3 of 3 Physical Demands • Depending on the assignment, may require ordinary ambulatory skills sufficient to visit other locations; or the ability to stand, walk and manipulate (lift, carry, move) light to medium weights of 10-50 pounds. Requires good hand-eye coordination, arm, hand, and finger dexterity, including ability to grasp, and visual acuity to use a keyboard, operate equipment, and read technical information. ADDITIONAL NOTES ALIGN PRECISION is an Equal Opportunity Employer and wholeheartedly supports diversity in the workplace as a basic premise for business success. All employees of ALIGN PRECISION are employed on an at-will basis. This job description in no way states or implies that these are the only duties to be performed by the employee(s) incumbent in this position. Employee(s) will be required to follow any other job-related instructions and to perform any other job-related duties requested by any person authorized to give instructions or assignments. A review of this position has excluded the marginal functions of the position that are incidental to the performance of fundamental job duties. All duties and responsibilities are essential job functions and requirements and are subject to possible modification to reasonably accommodate individuals with disabilities. To perform this job successfully, the incumbent(s) will possess the skills, aptitudes, and abilities to perform each duty proficiently. Some requirements may exclude individuals who pose a direct threat or significant risk to the health or safety of themselves or others. The requirements listed in this document are the minimum levels of knowledge, skills, or abilities.

Job Description Legacy Talent Search is currently seeking candidates for a Manufacturing Engineer - Machining role in Biddeford, ME. Our client is a well-established industry leader known for innovation and a commitment to delivering the highest-quality products. With a focus on continuous improvement, they pride themselves on maintaining excellence at every stage of their manufacturing process. Key Responsibilities: · Help evolve technical machining centers and define machining processes within the production facility. · Identify, design, and implement process improvements using CNC technology, Lean/Six Sigma tools, and GD&T methodologies. · Provide hands-on technical support for a 24/7 manufacturing operation in assigned machining areas. · Analyze technology requirements, resources, and timelines to plan and execute engineering projects effectively. · Perform root cause analyses for equipment or process failures and implement data-driven corrective actions. · Support non-conformance programs and develop preventive measures to ensure continuous quality improvement. · Prepare technical reports and deliver presentations to management and customers regarding process and project performance. · Design and develop new equipment or tooling to improve production efficiency and quality. · Ensure compliance with safety, health, and environmental standards in all machining operations. · Apply quality standards and ensure adherence to certification and regulatory requirements. · Collaborate with internal and external customers to qualify process changes and provide technical services and recommendations. Qualifications: · Bachelor's degree in Mechanical Engineering or a closely related discipline required. · Minimum 3 years of hands-on machining or manufacturing engineering experience. · Strong background in CNC machining and process optimization. · Proficiency with GD&T, product/tool design, and engineering drawing approval standards (GD&T certification preferred). · Demonstrated success in technical problem-solving and process improvement initiatives. · Strong work ethic with excellent attention to detail and analytical thinking. · Effective written and verbal communication skills for technical reporting and cross-functional collaboration. · Familiarity with industrial tools, equipment, and machining processes required. · Experience in aerospace, high-temperature composites, textiles, or industrial manufacturing systems is highly desirable. · Knowledge of Lean Manufacturing principles preferred. · Interest and technical understanding of composites and ceramics a plus. What We Offer: · Competitive compensation package. $95,000-$110,000 annually DOE · 16 Earned Time Off (ETO) days and 12 paid holidays · Comprehensive Medical, Dental, and Vision benefits. · 401(k) with company match. · Tuition reimbursement for continued education. · $1,000 sign-on bonus. · Opportunities for career growth and professional development within an innovative, industry-leading company. At Legacy Talent Search, we are more than just a staffing agency. We are dedicated to supporting the growth of the American economy and way of life, one job at a time. With a focus on rebranding the staffing industry, we work tirelessly to show how a specialized recruiting team can drive productivity. Our legacy is built on people and community-how we help others is how we leave our mark. Join us today and discover how we #recruitdifferently. Legacy Talent Search is an equal opportunity employer.

Job Description Manufacturing Engineer II, Finishing SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: **************** Position Summary: The Manufacturing Engineer II, Finishing will be responsible for developing, implementing, and improving a variety of finishing processes at SIG SAUER's firearm facilities. Emphasis will be placed on vibratory, media, robotic abrasive sanding, laser ablating of precision CNC machined components, and machining and assembly of precision firearm components utilizing clearly defined technical drawings and interchangeable parts. In addition, this position will require execution of manufacturing feasibility, quality planning, and corrective action for internal quality concerns. FLSA: Exempt Job Duties and Responsibilities: Plan, design, and implement manufacturing processes for new and existing firearm product designs while providing budgetary estimates for equipment, tools, gages, and production rate. Use project management techniques to procure tooling and equipment for new products to meet launch timelines and cost targets. Identify areas for improvement and conduct formal cost savings analysis using established procedures. Determine problem resolutions and implement improvements to quality and throughput. Evaluate and improve product designs for manufacturability while applying GD&T and dimensional stack-ups. Provide production floor support to maintain output and quality for technical systems and manufacturing processes including: High volume CNC machining Machine and Tool Design Mass Finishing Systems Automation Laser Engraving Originate and develop new systems and processes and implement into full production. Debug and runoff new capital equipment to meet plant goals for quality, throughput, and cost. Execute turnkey runoffs per SIG SAUER machine specification requirements. Generate new machine specifications with the guidance of Engineering Lead or Supervisor. Resolve and prevent quality issues related to assigned product, processes, and NPI components using statistical methods. Apply gage R&R, bias, dimensional stack-ups, control plan methodology, GD&T, and enroll in a certification program for Shainin Red X and/or Six Sigma. Perform as technical leader for production personnel including setters, operators, and technicians. Recommend and implement technological alterations and enhancements to improve quality of products, procedures, and the output and quality of manufacturing processes. Maintain research, activity documentation, and prepare reports. Provide consultation on problem solving teams and complete assigned tasks per agreed upon timelines. Participate in 5S Workplace organizational activities and maintain the area in good working order through sustainment activities. Miscellaneous duties as assigned. Education/Experience & Skills: Bachelor's degree in Mechanical or Manufacturing Engineering and at least 3-6 years of previous experience. Knowledge of Geometric Dimensioning and Tolerancing (GD&T) ASME Y14.5M-2009. Must be proficient in using Microsoft Excel, Word, and PowerPoint as well as SOLIDWORKS. Possess a basic working knowledge of monday.com and have experience in using data analysis programs. Must be able to demonstrate expertise in a variety of the field's concepts, practices, and procedures. Good working knowledge of materials and metal finishing processes. Ability to plan and execute multiple projects. Must be able to work independently and as part of a team. Quality of work must be very high. Must be able to clearly, concisely, and accurately convey ideas and information to others, both verbally and in written form. Organization of documentation and record keeping shall be to a high standard. Working Conditions: Prolonged periods of sitting at a desk and working at a computer using a keyboard and mouse performing repetitive tasks. Ability to open file cabinets, reach with hands and arms, bend, and twist, lift and move files. Ability to lift up to 25 pounds. Must wear required Personal Protective Equipment (PPE) where required. Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. Security Mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.

Reports To: Engineering Director About Q, LLC Q is a cutting-edge firearms technology company committed to delivering innovative, high-performance solutions to the firearms industry. We push the boundaries of design, engineering, and manufacturing-setting new standards for excellence. As a Manufacturing Engineer at Q, you will play a pivotal role in driving innovation, leading planning efforts, and overseeing the development and research of firearms manufacturing processes and technologies. Education Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field. Equivalent work experience considered in lieu of degree. Relevant coursework: statics, dynamics, materials science, and physics. Responsibilities Develop and implement manufacturing processes for firearms, ensuring efficiency and quality. Design and optimize production workflows and layouts to maximize productivity and safety. Collaborate with design engineering to ensure manufacturability of components and systems. Oversee installation, operation, and maintenance of manufacturing equipment and tooling. Conduct failure analysis and implement corrective actions to resolve production issues. Develop and maintain detailed process documentation (work instructions, SOPs, process flow diagrams). Lead continuous improvement initiatives to enhance capabilities and reduce costs. Ensure compliance with all applicable safety and regulatory standards. Provide technical support and training to manufacturing staff and operators. Manage projects introducing new technologies/methods from concept through implementation. Conduct time studies and analyze production metrics to identify improvement opportunities. Qualifications Strong written and verbal communication skills; able to create and deliver presentations. Proven project management ability including budgeting and schedule ownership. Experience with CNC machining, stamping, molding, 3D printing, and casting. Strong analytical and problem-solving skills; design-thinking mindset preferred. Current, up-to-date technical knowledge of firearms manufacturing processes. Ability to conduct testing and quality-assurance checks on completed projects. Familiarity with Lean and Six Sigma methodologies (Green Belt preferred). Capable of working in a fast-paced environment while managing multiple projects. Strong understanding of materials science and metallurgical principles for firearms applications. Disclaimer It is impossible to list every requirement or responsibility of any position. Job duties and company needs evolve over time. The above job description is not comprehensive or exhaustive. Q reserves the right to adjust, add, or remove responsibilities as necessary. Employees may be required to undertake additional duties to meet business needs. Required Background and Drug Screen Upon Hire

Fiber Materials Inc. | solutions for the most extreme places in the universe FMI's manufacturing facility has been a leading solutions provider of high temperature materials and composites for more than 50 years, serving the Department of Defense and NASA. The focus in Maine is on multidirectional reinforced Carbon/Carbon (C/C) and Ceramic Matrix Composites (CMCs) that enable high-temperature components such as: thermal protection systems, re-entry vehicle nose tips as well as rocket motor throats and nozzles. Our materials are being used on ground-breaking space initiatives such as the Orion Multi-Purpose Crew Vehicle and the heat shield for NASA's Mars 2020 mission, important missile programs, airfoils in commercial and military jet engines, and as lightweight armor for U.S. military ground vehicles. Your role: FMI is seeking an energetic Manufacturing Engineer with a drive for success to add to our Engineering team! As the Manufacturing Engineer, you will be responsible for the support of current production systems and future improvements in safety, quality, cost, and cycle time. You will also coordinate and direct projects, make detailed plans to accomplish goals and direct the integration of technical activities, such as, process improvements, equipment installation/modification, and material system development. To be a successful Manufacturing Engineer, you will achieve results in solving technical problems, improving existing processes, and supporting customer focused programs. There will be opportunities to get hands-on experience in a wide range of manufacturing and engineering disciplines Job Responsibilities: Help evolve technical machining center(s) and product machining definition in production facility Identify, design, and implement process improvements in assigned areas of responsibility using CNC, Lean/Six Sigma tools and GD&T Provide technical support for 7x24 manufacturing facility in assigned areas of responsibility Analyze technology requirements, resource needs, and schedules to assess and plan project execution Perform root cause analysis for failure investigations and other data analysis tasks, make data-driven decisions Support non-conformance program and implement preventive actions Write periodic reports or oral presentations to management and customers on specific projects Design and develop new equipment for future production systems Ensure that health and safety policies are followed Apply quality standards to ensure compliance with certification requirements in plant applications Work with internal and external customers to develop and qualify process changes and provide technical services What we need from you: Bachelor's degree in mechanical engineering, or closely related discipline 3+ years of related machining experience in manufacturing Experience in CNC machining Experience with GD&T, Product or Tool Design and Engineering drawing approval standards. GD&T Training Certification preferred. Expertise with machining principals, methods and process capability Demonstrated results in technical problem solving Strong work ethic Excellent attention to detail Strong oral and written communication skills Experience with industrial tools and equipment preferred Experience in aerospace/high-temperature composites, textiles or industrial engineering systems would distinguish the candidate Familiarity with Lean manufacturing principles desired Interest and knowledge in composites and ceramics What you'll get from us: 16 ETO days 12 paid holidays (including Winter Closure!) Medical / Dental / Vision 401k Company Match Tuition Reimbursement $1000 Sign-On Bonus

Key Responsibilities MUST HAVE A PE-Will not be stamping during contract phase The Mechanical Buildings Design Group provides HVAC and plumbing solutions for Global projects. The Mechanical Engineer level 5 position is responsible for the engineering and design of the HVAC and plumbing systems in various types of facilities. The HVAC Team is engaged in the following: Design and Construction Activities o Project Delivery Methods - Traditional Design-Bid-Build and Alternative Conceptual-Bid- Build. o Facility Types -Water Treatment, Power Generation buildings, and Substations. o Systems -HVAC and Plumbing. o Type of Areas -Waste water treatment buildings, Administrative, Warehouse, Maintenance, Workshop, Laboratory, Chemical Storage & Handling, Electrical Distribution Center, Low & Medium Voltage Switchgear, and Pump Areas. Studies o Energy Audit/Efficiency - Engineering studies, system performance reviews, and energy compliance calculations o Code Review/Application - Facility review for code compliance. o Sustainable Design/LEED - Application of sustainable strategies Skills: Minimum of 8 years related work experience. Self-Motivated, Problem Solving, Written Communications, Driven for Results, Quality Focused, Strong Listening Skills. Intermediate knowledge of engineering design principles and the following applicable design guides and standards related to HVAC, and plumbing system design. Including a basic knowledge of the following: International Codes Council (ICC) Suite of Codes ASHRAE Handbooks / Standards ASPE design handbooks SMACNA Standards NFPA standards Computer generated HVAC Heatloads, energy modeling and HVAC equipment sizing Technical Submittal reviewing process Bid reviewing process Microsoft Office Suite Bluebeam Revu Revit 3D Modeling...EXCEL ... (HVAC CALC SOFTWARE) Chvac - Commercial HVAC Load Software Experience with large-scale water-cooled chillers is preferred. Requires a bachelor's degree in engineering from either a recognized accredited program in their home country or the country in which the professional is practicing $55-&70/hr.

Manufacturing Engineer Reports To: Engineering Director About Q, LLC Q is a cutting-edge firearms technology company committed to delivering innovative, high-performance solutions to the firearms industry. We push the boundaries of design, engineering, and manufacturing-setting new standards for excellence. As a Manufacturing Engineer at Q, you will play a pivotal role in driving innovation, leading planning efforts, and overseeing the development and research of firearms manufacturing processes and technologies. Education Bachelor's degree in Mechanical Engineering, Manufacturing Engineering, or a related field. Equivalent work experience considered in lieu of degree. Relevant coursework: statics, dynamics, materials science, and physics. Responsibilities Develop and implement manufacturing processes for firearms, ensuring efficiency and quality. Design and optimize production workflows and layouts to maximize productivity and safety. Collaborate with design engineering to ensure manufacturability of components and systems. Oversee installation, operation, and maintenance of manufacturing equipment and tooling. Conduct failure analysis and implement corrective actions to resolve production issues. Develop and maintain detailed process documentation (work instructions, SOPs, process flow diagrams). Lead continuous improvement initiatives to enhance capabilities and reduce costs. Ensure compliance with all applicable safety and regulatory standards. Provide technical support and training to manufacturing staff and operators. Manage projects introducing new technologies/methods from concept through implementation. Conduct time studies and analyze production metrics to identify improvement opportunities. Qualifications Strong written and verbal communication skills; able to create and deliver presentations. Proven project management ability including budgeting and schedule ownership. Experience with CNC machining, stamping, molding, 3D printing, and casting. Strong analytical and problem-solving skills; design-thinking mindset preferred. Current, up-to-date technical knowledge of firearms manufacturing processes. Ability to conduct testing and quality-assurance checks on completed projects. Familiarity with Lean and Six Sigma methodologies (Green Belt preferred). Capable of working in a fast-paced environment while managing multiple projects. Strong understanding of materials science and metallurgical principles for firearms applications. Disclaimer It is impossible to list every requirement or responsibility of any position. Job duties and company needs evolve over time. The above job description is not comprehensive or exhaustive. Q reserves the right to adjust, add, or remove responsibilities as necessary. Employees may be required to undertake additional duties to meet business needs. Required Background and Drug Screen Upon Hire

Diodes Incorporated is seeking a full-time equipment engineer to join our talented manufacturing team. This position requires a flexible schedule and the willingness to work occasional overtime. You will be responsible for multiple activities with respect to future planning, project execution, maintenance and repair of semiconductor manufacturing equipment. These activities would include deliverables such as troubleshooting and repairs, continuous improvements to help with availability, cost savings and OEE. Good written skills for creating and updating activity checklists, corrective and preventative maintenance procedures, and specification updates, as well as good interpersonal skills to provide clear technician direction and training and present data to management. Must have good project execution acumen, strong semiconductor equipment experience and be comfortable working in a fast-paced manufacturing environment and taking ownership of equipment within your assigned area. Principle Duties and Responsibilities: * Working hours: 40-hour work week, Monday through Friday. OT is expected in order to keep your assigned area running as smoothly as possible. * Work is performed within a clean room environment that requires the wearing of a smock, hood, booties, latex gloves, and safety glasses. * Requires the use of airline respirator. * Requires occasional wearing of personal protective equipment including, but not limited to, aprons, gauntlets, and full-face masks. * Requires lifting of objects that weigh up to 50 lbs. * May require work with hazardous gases, chemicals, and high voltages. * Troubleshoot and repair electromechanical systems. * Troubleshoot and repair electro-pneumatic systems. * Consistently directs one's own work at a high level and demonstrates advanced leadership skills for small teams and is sought out as a subject matter expert for assigned area. * Follows procedures without deviation and update them as needed. * Discusses repair and maintenance requirements with peers and balances work with available talent. * Reviews tool histories for all area tools looking for common themes and proposes improvements / repairs and executes on them. * Identifies abnormal tool conditions and execute corrective actions. * Has clear technical knowledge of the equipment and its sub-systems within area assigned. * Has process knowledge enough to understand recipes and the desired outcomes. * Understands and uses SPC charts to identify failure modes. * Responsible for the completion of all scheduled and unscheduled preventative maintenance and repair procedures in a timely, accurate, and safe manner within assigned area. * A safety-minded approach is required: employees must be able to learn, understand and follow all safety documentation, specs and protocol, including LOTO. Must also be able to identify any/all safety concerns and regulatory violations in order to eliminate them. * May possibly be cross trained in other areas as needed Knowledge, Skills and Abilities: * Strong electrical/mechanical semiconductor knowledge. * Ability to perform He-Leak checks of gas and vacuum systems. * Comfort handling chemicals, including acids, bases, and solvents. * Experience troubleshooting electrical issues. * Experience troubleshooting vacuum systems. * Ability to read electrical schematics * Ability to use digital multimeters and voltage supplies. * Ability to work well in a collaborative environment, and as part of a team. * The flexibility to work outside of normal schedule, cross train, (learn more than one job or operation) and multi-task as needed. * A BS in Engineering or relevant technical discipline, or Military Equivalent. Diodes Incorporated (Nasdaq: DIOD), a Standard and Poor'sSmallCap 600 and Russell 3000 Index company, is a leading global manufacturer and supplier of high-quality application specific standard products within the broad discrete, logic, and analog semiconductor markets. Diodes serves the consumer electronics, computing, communications, industrial, and automotive markets. We offer a competitive benefits package to include medical, dental, vision, FSA, 401k with company match, company paid Short Term and Long-Term disability and standard life insurance policy. We also provide paid time off and an employee wellness program.

IDEXX is looking for an experienced Principal R&D Engineer, Diagnostic Consumables to lead the development of high-volume, single-use consumables for our veterinary diagnostics platforms. In this role, you'll work at the intersection of engineering, life sciences, and manufacturing-collaborating with assay scientists, instrument teams, and external partners to bring innovative, cost-effective products to market. From early material selection to physics-based modeling and USDA-compliant commercialization, your impact will be felt across the entire product lifecycle. What you'll do: * Own the technical vision for diagnostic consumables, guiding concept development from material selection through commercialization. * Drive advanced modeling and simulation (ANSYS, COMSOL) to establish design principles across fluidic, thermal, and mechanical domains. * Shape cross-functional strategy by partnering with assay scientists, instrument engineers, and external vendors to deliver integrated, scalable solutions. * Lead design reviews and risk assessments ensuring robust validation strategies and regulatory compliance under USDA standards. * Mentor and develop junior engineers, fostering technical excellence and building organizational capability in diagnostic system engineering. * Influence long-term roadmaps, contributing to portfolio planning and innovation pipelines that expand IDEXX's diagnostic capabilities. * Champion manufacturability and cost-effectiveness, ensuring designs translate seamlessly into high-volume, regulated production environments. * Contribute to technical roadmaps and mentor junior team members What you need to succeed: * Ph.D. or Master's in Mechanical Engineering, Biomedical Engineering, Materials Science, or related field * 8+ years of experience in diagnostic consumables or medical device development * Strong proficiency in analytical modeling; SolidWorks experience is a plus * Proven success in high-volume, regulated manufacturing environments * Excellent communication, leadership, and cross-functional collaboration skills * Experience designing and integrating microfluidic systems * Familiarity with high-volume web-based manufacturing technologies * Track record of developing high-volume assay consumables or diagnostic products What you can expect from us: * Salary range starting at $160,000 based on experience * Opportunity for annual cash bonus * Health / Dental / Vision Benefits Day-One * 5% matching 401k * Additional benefits including but not limited to financial support, pet insurance, mental health resources, volunteer paid days off, employee stock program, foundation donation matching, and much more If you're looking for a role that'll challenge you, offer a variety of work and learning, while helping an amazing industry, we'd love to hear from you! Why IDEXX: We're proud of the work we do because our work matters. An innovation leader in every industry we serve, we follow our Purpose and Guiding Principles to help pet owners worldwide keep their companion animals healthy and happy, to ensure safe drinking water for billions, and to help farmers protect livestock and poultry from disease. We have customers in over 175 countries and a global workforce of over 10,000 talented people. So, what does that mean for you? We enrich the livelihoods of our employees with a positive and respectful work culture that embraces challenges and encourages learning and discovery. At IDEXX, you will be supported by competitive compensation, incentives, and benefits while enjoying purposeful work that drives improvement. Let's pursue what matters together. About the job location: If you're thinking about relocating for this role, here are a few things to know about living in Maine (often called "Vacationland"). The Westbrook, ME area provides great access to active downtown areas and the outdoors, with the coast and numerous mountains and hiking trails nearby. You'll also find a number of large companies like ours in the area, creating a vibrant work culture. You can learn more on the Portland tourism website: ************************************************************** IDEXX values a diverse workforce and workplace and strongly encourages women, people of color, LGBTQ+ individuals, people with disabilities, members of ethnic minorities, foreign-born residents, and veterans to apply. IDEXX is an equal opportunity employer. Applicants will not be discriminated against because of race, color, creed, sex, sexual orientation, gender identity or expression, age, religion, national origin, citizenship status, disability, ancestry, marital status, veteran status, medical condition, or any protected category prohibited by local, state, or federal laws. While we appreciate our staffing partners, we are unable to accept unsolicited agency resumes. #LI-CAG

**Change the world. Love your job.** In your first year with TI, you will participate in the Career Accelerator Program (CAP), which provides professional and technical training and resources to accelerate your ramp into TI, and set you up for long-term career success. Within this program, we also offer function-specific technical training and on-the-job learning opportunities that will encourage you to solve problems through a variety of hands-on, meaningful experiences from your very first day on the job. The TMG Development program is a 12-month program for new college graduates in the TMG organization. Do you want to work for an organization that values your opinion? Do you want to work for an organization where you can play a pivotal role in several different areas? As a Texas Instruments Equipment Engineer, you will have the opportunity to work in a vibrant and dynamic team-oriented environment. **Responsibilities include:** + Evaluate, select, and order equipment that is most appropriate and cost effective for the manufacture of company products + Oversee the installation, modification, upgrade and maintenance of manufacturing equipment + Keep current on equipment manufacturers' technical notices, upgrades and safety issues + Study equipment performance and reliability + Establish programs and solutions for increasing uptime and for equipment problems that affect the manufacturing process + Provide technical support to the manufacturing equipment repair and process engineering organizations + Define and write preventative maintenance schedules **Why TI?** + Engineer your future. We empower our employees to truly own their career and development. Come collaborate with some of the smartest people in the world to shape the future of electronics. + We're different by design. Diverse backgrounds and perspectives are what push innovation forward and what make TI stronger. We value each and every voice, and look forward to hearing yours. Meet the people of TI (*************************************** UI/CandidateExperience/en/sites/CX/pages/4012) + Benefits that benefit you. We offer competitive pay and benefits designed to help you and your family live your best life. Your well-being is important to us. **About Texas Instruments** Texas Instruments Incorporated (Nasdaq: TXN) is a global semiconductor company that designs, manufactures and sells analog and embedded processing chips for markets such as industrial, automotive, personal electronics, communications equipment and enterprise systems. At our core, we have a passion to create a better world by making electronics more affordable through semiconductors. This passion is alive today as each generation of innovation builds upon the last to make our technology more reliable, more affordable and lower power, making it possible for semiconductors to go into electronics everywhere. Learn more at TI.com . Texas Instruments is an equal opportunity employer and supports a diverse, inclusive work environment. All qualified applicants will receive consideration for employment without regard to race, color, religion, creed, disability, genetic information, national origin, gender, gender identity and expression, age, sexual orientation, marital status, veteran status, or any other characteristic protected by federal, state, or local laws. If you are interested in this position, please apply to this requisition. **Minimum requirements:** + Bachelors degree in Electrical Engineering, Electrical & Computer Engineering, Chemical Engineering, Mechanical Engineering, Materials Science Engineering, Physics or related engineering degree + Cumulative 3.0/4.0 GPA, or higher **Preferred qualifications:** + Knowledge of AMAT PVD and/or AMAT TxZ chambers equipment + Knowledge of PVD, CVD, high vacuum and/or ultra high vacuum + Knowledge of other equipment (e.g., AMAT, Veeco, TEL, Novellus, and/or ASM) + Understanding of tool monitoring and interdiction software, and equipment maintenance and documentation + Strong verbal and written communication skills + Demonstrated strong analytical, critical thinking and problem solving skills + Ability to work in teams and collaborate effectively with people in different functions + Ability to take the initiative and drive for results + Strong time management skills that enable on-time project delivery + Ability to work effectively in an interrupt-driven, fast-paced and rapidly changing environment + Demonstrated ability to build strong, influential relationships **ECL/GTC Required:** Yes

Operating under the BIW Business Oeprating System (BOS) the Machinery Section Engineer ensures compliance with safety, quality, and performance standards while coordinating with other key stakeholders to meet overall milestones. Key Responsibilities Safety Leadership: Be a safety leader for your team and ensure that each person leaves in the condition they came in. Ensure all safety trainings are completed on time. Project Execution: Provide technical, engineering, design and project leadership for main propulsion machinery shipboard equipment and systems (gas turbine engines, propellers, reduction gears, steering gears, shafting, seals and generator sets etc.), associated piping systems & HVAC systems. Create CAE models that simulate ship system designs, and perform analysis and calculations using CAE applications. Develop and maintain equipment technical purchase specifications, diagrams and calculations. Develop, document and present technical position on requirements compliance issues related to design and construction within assigned area of cognizance. Develop and define ship system engineering requirements and relate them to top level performance requirements. Team Collaboration and Communication: Interface with customers (Navy, Manufacturing, Detail Design, Procurement, QA, etc) to resolve technical issues, recommend changes and maintain technical documentation. Support ship construction activities, including ship testing, system activation and sea trials. Participate on or lead integrated product and process teams. Required/Preferred Education/Training BS in Mechanical Engineering or Marine Engineering from an ABET accredited university or college required. MS degree and/or PE license preferred. Required/Preferred Experience Minimum 8 years (Senior Engineer) / 12 years (Principal Engineer) experience in main propulsion machinery and auxiliary systems required. Shipboard applications preferred. Excellent written and oral communication skills. Adept at giving technical presentations at group meetings. Demonstrated experience to lead technical projects. Windows and CAE (i.e. Pro/E, Pro/M, FEA, CFD software) experience highly desirable. Project management and coordination skills: ability to plan, organize and execute projects; ability to handle multiple projects and assignments concurrently. Must be willing to support occasional company travel. Must possess, or have the ability to obtain, a Secret level security clearance. This position requires you to be able to obtain a government security clearance. You must be a US Citizen for consideration and you must be able to obtain an interim security clearance within the first 45 days of hire. For more information regarding the security clearance process, please visit Investigations & Clearance Process (dcsa.mil)

SIG SAUER, Inc. is a leading provider and manufacturer of firearms, electro-optics, ammunition, airguns, suppressors, remote controlled weapons stations, and training. For over 250 years SIG SAUER, Inc. has evolved, and thrived, by blending American ingenuity, German engineering, and Swiss precision. Today, SIG SAUER is synonymous with industry-leading quality and innovation which has made it the brand of choice amongst the U.S. Military, the global defense community, law enforcement, competitive shooters, hunters, and responsible citizens. Additionally, SIG SAUER is the premier provider of elite firearms instruction and tactical training at the SIG SAUER Academy. Headquartered in Newington, New Hampshire, SIG SAUER has over 3,400 employees across sixteen U.S. locations in three states, and four additional global facilities. SIG SAUER is certified a Great Place to Work™. For more information about the company and product line visit: www.sigsauer.com Position Summary: The Manufacturing Engineer II, Finishing will be responsible for developing, implementing, and improving a variety of finishing processes at SIG SAUER's firearm facilities. Emphasis will be placed on vibratory, media, robotic abrasive sanding, laser ablating of precision CNC machined components, and machining and assembly of precision firearm components utilizing clearly defined technical drawings and interchangeable parts. In addition, this position will require execution of manufacturing feasibility, quality planning, and corrective action for internal quality concerns. FLSA: Exempt Job Duties and Responsibilities: Plan, design, and implement manufacturing processes for new and existing firearm product designs while providing budgetary estimates for equipment, tools, gages, and production rate. Use project management techniques to procure tooling and equipment for new products to meet launch timelines and cost targets. Identify areas for improvement and conduct formal cost savings analysis using established procedures. Determine problem resolutions and implement improvements to quality and throughput. Evaluate and improve product designs for manufacturability while applying GD&T and dimensional stack-ups. Provide production floor support to maintain output and quality for technical systems and manufacturing processes including: High volume CNC machining Machine and Tool Design Mass Finishing Systems Automation Laser Engraving Originate and develop new systems and processes and implement into full production. Debug and runoff new capital equipment to meet plant goals for quality, throughput, and cost. Execute turnkey runoffs per SIG SAUER machine specification requirements. Generate new machine specifications with the guidance of Engineering Lead or Supervisor. Resolve and prevent quality issues related to assigned product, processes, and NPI components using statistical methods. Apply gage R&R, bias, dimensional stack-ups, control plan methodology, GD&T, and enroll in a certification program for Shainin Red X and/or Six Sigma. Perform as technical leader for production personnel including setters, operators, and technicians. Recommend and implement technological alterations and enhancements to improve quality of products, procedures, and the output and quality of manufacturing processes. Maintain research, activity documentation, and prepare reports. Provide consultation on problem solving teams and complete assigned tasks per agreed upon timelines. Participate in 5S Workplace organizational activities and maintain the area in good working order through sustainment activities. Miscellaneous duties as assigned. Education/Experience & Skills: Bachelor's degree in Mechanical or Manufacturing Engineering and at least 3-6 years of previous experience. Knowledge of Geometric Dimensioning and Tolerancing (GD&T) ASME Y14.5M-2009. Must be proficient in using Microsoft Excel, Word, and PowerPoint as well as SOLIDWORKS. Possess a basic working knowledge of monday.com and have experience in using data analysis programs. Must be able to demonstrate expertise in a variety of the field's concepts, practices, and procedures. Good working knowledge of materials and metal finishing processes. Ability to plan and execute multiple projects. Must be able to work independently and as part of a team. Quality of work must be very high. Must be able to clearly, concisely, and accurately convey ideas and information to others, both verbally and in written form. Organization of documentation and record keeping shall be to a high standard. Working Conditions: Prolonged periods of sitting at a desk and working at a computer using a keyboard and mouse performing repetitive tasks. Ability to open file cabinets, reach with hands and arms, bend, and twist, lift and move files. Ability to lift up to 25 pounds. Must wear required Personal Protective Equipment (PPE) where required. Must comply with all work exposure EH&S training requirements and adhere to SIG SAUER Inc. Security Mandates. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law.