Research and development engineer jobs in Spring Hill, FL

Principal Mechanical Engineer Job Type: Full time Permanent with Direct client Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection.

Principal Mechanical Design Engineer (P.E.) Compensation: ~$180,000 + full benefits package Sector: Healthcare & Education Discipline: Building Services (MEP) We are seeking a highly experienced Principal Mechanical Design Engineer (P.E.) to lead mechanical engineering strategy, design oversight, and project delivery for complex healthcare and education building services projects. The ideal candidate brings deep technical expertise, strong leadership skills, and a proven track record delivering high-performance, code-compliant mechanical systems within mission-critical environments. Key Responsibilities Leadership & Project Management Serve as mechanical engineering lead for major healthcare and education projects, managing full lifecycle delivery. Oversee multidisciplinary project teams, guiding engineers, designers, and external consultants. Act as a technical authority for HVAC, plumbing, med-gas, and building mechanical systems. Mechanical Systems Design Develop and review HVAC, hydronic, air distribution, and plumbing systems for hospitals, labs, universities, and specialty learning environments. Ensure all designs meet applicable codes (ASHRAE, IBC, IMC, NFPA, FGI Guidelines for healthcare). Conduct load calculations, system modeling, equipment sizing, and sustainability/energy efficiency analysis. Quality, Compliance & Technical Oversight Approve engineering deliverables including drawings, specifications, and technical reports. Perform QA/QC reviews, ensuring engineering excellence and risk mitigation. Provide expert judgment on complex mechanical problems and system failures. Client & Stakeholder Engagement Serve as the primary mechanical point of contact for clients, architects, contractors, and regulatory agencies. Present designs, resolve technical issues, and ensure alignment with client goals and project constraints. Construction Support Support pre-construction and construction phases, including submittal reviews, RFI responses, and site observations. Provide field engineering expertise to ensure successful installation and commissioning. Required Qualifications Professional Engineer (P.E.) license (Mechanical). 8 to 10+ years of mechanical design experience in building services, including substantial work in healthcare and education sectors. Expertise in HVAC, plumbing, med-gas, and energy systems design. Strong proficiency with Revit, BIM tools, and mechanical engineering software. Excellent communication, leadership, and client-facing skills. Preferred Qualifications Experience with sustainable design, high-performance buildings, and energy modeling. Prior leadership of multidisciplinary or regional engineering teams. Ability to win, grow, and manage key client accounts.

About Us: We are working with a mission-driven SaaS company dedicated to keeping people safe. They're passionate about public safety and strive to create innovative solutions that keep their customer's happy. Job Description: As a Senior Staff Engineer, you will play a crucial role in building and maintaining our cutting-edge web applications. You will work closely with our engineering team to design, develop, and deploy robust, scalable, and user-friendly features. Onsite in Tampa, FL Area Up to 220k base salary Responsibilities: Design, develop, and maintain backend applications using Ruby on Rails. Build user-friendly and responsive frontend interfaces using React. Collaborate with cross-functional teams to define and implement new features. Write clean, well-tested, and efficient code. Qualifications: Strong proficiency in Ruby on Rails, React, and React Native. Experience with relational databases (e.g., PostgreSQL). Solid understanding of JavaScript and web development fundamentals. Familiarity with RESTful APIs and microservices architecture.

If you're ready to jump-start your career in mechanical design at an established - but growing - MEP consulting firm, we want to hear from you! Emerald Engineering is seeking a motivated Mechanical Designer / Engineer to join our team. This is an excellent opportunity for a recent Mechanical Engineering graduate or someone who has completed a technical drafting program (AutoCAD, Revit, or similar), and is eager to begin building a career in mechanical/HVAC design. In this role, you will support the design of mechanical systems for a variety of projects, including commercial and high-rise residential buildings, working closely with experienced engineers and designers who will help you develop your technical skills, industry knowledge, and production capabilities. PLEASE NOTE: This is a full-time, in-person position based at our Tampa, FL (33619) headquarters. Candidates must live within a commutable distance of our office. Role Responsibilities Assist in the design and production of mechanical building systems, including HVAC, piping, and other related mechanical components. Create and revise AutoCAD and/or Revit drawings, 3D models, and construction documents under the guidance of senior staff. Support engineers with calculations, equipment selection, and basic system layouts. Help prepare project deliverables such as plans, specifications, and reports. Coordinate with internal team members to ensure accurate, high-quality design documents. Participate in site visits to document existing conditions (with team guidance). Maintain organized project files and support overall project workflow. What You'll Bring to Emerald Associate degree or technical program certification in drafting/design OR bachelor's degree in Mechanical Engineering. Familiarity with AutoCAD and/or Revit from coursework, training, or hands-on projects. Strong interest in HVAC and mechanical system design for buildings. Ability to follow direction, learn quickly, and contribute in a team-oriented environment. Solid communication, organization, and problem-solving skills. What You'll Get From Emerald We believe in rewarding our employees for their hard work and providing opportunities to thrive. At Emerald Engineering, you'll enjoy: Annual bonuses. Generous PTO + a paid Winter Break closure in December. Employee-only premiums covered at 100% for select medical, dental, vision, short-term disability, and life insurance coverages. Additional benefit plans are available to support you and your family's well-being. 401(k) retirement plan with company contribution. A hardworking but relaxed and collaborative environment. Development and growth opportunities. Monthly team building activities. A Little Bit About Emerald Founded in 2007, Emerald is a privately held consulting engineering firm based in Tampa, FL, providing comprehensive mechanical, electrical, plumbing, fire protection, and telecommunications engineering services. We handle hundreds of diverse projects annually across the United States, ranging from minor renovations to large-scale new constructions, with specialties in areas like healthcare, higher education, hospitality, and high-rise developments. Our team is made up of a diverse group of professional engineers, degreed engineers, designers, and support staff, holding licensure in numerous states. Joining Emerald Engineering means becoming a key player in our continued growth, with ample opportunity to make a tangible impact on both our diverse projects and our people. This is a salaried position offering the chance to work in a supportive and engaging environment where your expertise genuinely helps shape our future. Ready to Make an Impact? If you're motivated to learn, contribute, and grow within a supportive team, please apply via LinkedIn's “Easy Apply” option by submitting your resume and salary requirements. Emerald Engineering is an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Join The #1 Furniture Company-Join The #1 Furniture Brand Ashley Furniture Industries, Inc. is the largest manufacturer of furniture in the world. Established in 1945, Ashley offers one of the industry's broadest product assortments to retail partners in 123 countries. Position Summary Ashley seeks a Staff AI Engineer to join Ashley Furniture and lead the technical architecture of our agentic AI platform while remaining hands-on with critical implementations. You'll define how we build autonomous AI agent systems that operate across our supply chain, manufacturing, and retail domains, setting technical standards that enable the team to ship production features rapidly and reliably. Key Responsibilities Technical Leadership & Architecture: Define the technical strategy for our agentic AI platform. Design system architectures that support complex multi-agent workflows, real-time decision making, and seamless integration across supply chain and commerce systems. Make key technology choices that impact company trajectory. Cross-Domain System Design: Architect AI systems that span Ashley Furniture's supply chain optimization, manufacturing intelligence, and retail experiences. Design unified data models and APIs that enable agents to reason across inventory, demand forecasting, production scheduling, and customer behavior. Advanced Agent Development: Build sophisticated AI agents that handle complex, multi-step reasoning across business domains. Implement advanced patterns for tool use, multi-agent coordination, and human-in-the-loop controls for enterprise deployments. Platform & Infrastructure: Lead development of our core AI platform that enables rapid deployment of new agentic workflows. Build robust foundations for prompt management, model evaluation, observability, and cost optimization across multiple LLM providers. Team & Process Leadership: Mentor engineers and establish engineering practices that enable high-velocity feature development. Lead technical discussions, architecture reviews, and cross-functional collaboration with product and business teams. Strategic Technical Decisions: Evaluate and integrate emerging AI technologies, frameworks, and methodologies. Make build-vs-buy decisions for critical infrastructure components. Drive adoption of new capabilities like Model Context Protocol and advanced reasoning patterns. Qualifications Deep AI/ML systems expertise: Extensive experience building production AI systems at scale. Deep understanding of LLM architectures, fine-tuning, prompt engineering, and agent orchestration frameworks. Experience with both traditional ML and modern LLM-based systems. Systems architecture experience: You've designed and built complex distributed systems that handle high-throughput, low-latency requirements. Experience with microservices, event-driven architectures, and real-time data processing. Domain expertise in operations: Strong understanding of business operations and data workflows. You can translate complex business requirements into scalable technical solutions and understand the operational constraints that impact system design. Technical leadership track record: Experience leading technical teams, driving architectural decisions, and establishing engineering standards. You've successfully guided teams through technical challenges and scaling decisions. Full-stack capabilities: Comfortable working across the entire technology stack from infrastructure to user interfaces. Experience with Python and cloud platforms (AWS, Azure, GCP). Advanced LLM expertise: Deep experience with LLM architectures, fine-tuning, post-training, prompt engineering, and context engineering for optimal retrieval. Experience building production systems that leverage multiple LLM providers. Vision and multimodal systems: Extensive experience with vision models, computer vision, and multimodal AI systems. Experience building generative applications such as virtual furniture placement, room visualization, and spatial understanding systems that combine visual and textual understanding. Agent integration expertise: Experience with Model Context Protocol (MCP) implementations and agent-to-agent communication patterns. Understanding of multi-agent coordination and workflow orchestration. Nice To Have Deep understanding of multi-modal AI, tool use patterns, and agentic workflow design Background in real-time optimization, scheduling, or recommendation systems Experience building AI infrastructure platforms used by other engineers Apply today and find your home at Ashley! Benefits We Offer Health, Dental, Vision, Employee Assistance Program Paid Vacation, Holidays, and Your Birthday off Generous Employee Discount on home furnishings Professional Development Opportunities Ashley Wellness Centers (location specific) and Medical Tourism Telehealth 401(k) and Profit Sharing Life Insurance Our Core Values Honesty & Integrity Passion, Drive, Discipline Continuous Improvement/Operational Excellence Dirty Fingernail Growth Focused To learn more about Ashley Furniture, our community engagement programs, environmental stewardship, and our core values, please visit our Corporate Social Responsibility information page: Corporate Social Responsibility We are an equal opportunity employer and provide a drug-free working environment. While Ashley appreciates the interest of all candidates only those meeting specific position requirements may be contacted. Principals Only.

US Citizen is required Tampa, FL (Hybrid) No C2C Inquiries please As an experienced engineer, you know that Machine Learning (ML) is critical to understanding and processing massive datasets. Your ability to conduct statistical analyses on business processes using ML techniques makes you an integral part of delivering a customer-focused solution. We need your technical knowledge and desire to problem-solve to support DoD program offices. As an ML Engineer on our AI-enabled team, you will train, test, deploy, and maintain models that learn from data. In this role, you will own and define the direction of mission-critical solutions by applying best-fit ML algorithms and technologies. You will be part of a large community of ML engineers across the firm and collaborate with data engineers, data scientist, solutions architects, and product owners to deliver world class solutions to DoD and Federal clients. Responsibilities Establish scalable, efficient, automated processes for large-scale data analysis, machine learning model development, model validation and serving. Optimize machine learning algorithms. Contribute to building an infrastructure that facilitates end-to-end ML workflows. Explore new technologies like quantum engineering for advanced model development. Collaborate with cross-functional teams to enhance data processing pipelines. Communicate and coordinate with teams to accomplish objectives and deliver excellence. Requirements Top Secret clearance required (can be sponsored). 3+ years of full software development life cycle, including coding standards, code reviews, source control management, build processes, testing, and operations experience. 4+ years with natural language processing (NLP) topics, including tagging, syntactic parsing, word sense disambiguation, topic modeling, contextual text mining, or application of deep learning to NLP. Strong background in a modern programming language, such as Python or Java, and associated numerical and analytics packages (NUMPY, PANDAS); git; PYTORCH or TensorFlow; CI/CD pipelines and regression testing. Experience with one or more Deep Learning packages including but not limited to TensorFlow and PyTorch. Ability to quickly grasp technical concepts and collaborate with multiple functional groups. Excellent communication and collaboration skills, with the ability to work effectively with cross-functional teams. Detail-oriented mindset with a commitment to delivering high-quality results. Nice to Have Recent DoD or IC-related experience. Experience building distributed deep learning libraries or scaling large distributed deep learning workflows using PyTorch (or similar). Experience in machine learning, data mining, information retrieval, statistics, or natural language processing. Experience in large scale AI and ML infrastructure, AWS ML tools such as SageMaker. Experience with data discovery techniques and tools such as AWS Glue Crawler, Apache Atlas, Datahub, or Collibra.

McKim & Creed has a reputation for state-of-the-art engineering services that help energy users and providers convert facilities to cleaner, more efficient energy sources; harness the power of renewables; and optimize existing infrastructure and resources. Our highly respected team of engineers, planners and project managers are committed to the innovation, sustainability and resource efficiencies that lead to a cleaner, safer and more sustainable future. We currently have an exciting opportunity to join our Building, Energy and Infrastructure (BEI) Group within our Clearwater Florida team. If you want to work at a company that will help you become the best you can be, we're glad you found McKim & Creed. We look forward to learning about your passion and experience. What To Expect Day-To-Day: This person is a technical lead as part of a multi-discipline project team on projects in the Buildings, Energy, and Infrastructure group, in support of Mechanical (HVAC, plumbing and fire protection) systems for facility types including healthcare; higher education; institutional facilities; federal, state and local government; K-12 education and other commercial/industrial facilities. This person may serve as the Lead Mechanical Engineer for projects, producing design/construction drawings and specifications and ability to act as the Engineer of Record for the work they perform and the subordinates they supervise. Acts as the Client interface for projects they lead. Undertakes and directs evaluations of mechanical equipment/systems and prepares design computations and assessments. Generates and oversees mechanical design/construction drawings utilizing REVIT and AutoCAD software. Observes mechanical construction progress and generates field observation reports. Assesses the condition of mechanical systems within existing facilities. Responsible for completion of mechanical design tasks within budget and on schedule. Assists in the development of subordinate staff in mechanical design best practices. Communicates and coordinates the design, writing of reports and correspondence with other discipline professionals, as well as representatives of the Client's organization to complete work efficiently. Stays current with local, state & federal design standards and regulations. Helps develop new work and clients related to mechanical design services for healthcare; higher education; institutional facilities; federal, state and local government; K-12 education & support; and other commercial/industrial facilities. What You Need: Bachelor's Degree in Mechanical Engineering, or Bachelor's Degree in Architectural Engineering with mechanical focus, from an ABET-accredited university. 8-15 years of documented applicable experience working on facilities similar to those described above. Registered Professional Engineer in the State of Florida, with current NCEES. Resides in the Tampa Bay/Clearwater Area with Florda based experience Ability to work in person a minimum of three (3) days weekly in our Clearwater office. Ability to travel to project locations and client meetings throughout southwest, central, east and north Florida. Travel beyond this primary area may occasionally also be required. Significant experience using Autodesk REVIT gained in a similar design-related field. Experience with AutoCAD is also required. Strong knowledge of the Microsoft Office suite of software, as well as Bluebeam. Strong knowledge of the ASHRAE Standards commensurate with their years of experience. Ability to climb ladders and perform field survey duties. Must have a valid driver's license and an acceptable motor vehicle and criminal record. What Will Make You Stand Out: A process-oriented individual with strong organization, technical and communication skills. A solid communicator, able to take and understand directives from Project Manager and Senior Mechanical Engineer and coordinate efforts with design team. Excellent Client communication skills with an interest in developing new business and a desire to be on a career path to an Engineering Group Manager in 2-5 years. Able to complete work consistently with flexibility to accommodate varying project demands. Experience leading the design efforts of subordinate staff. Maintains a high level of precision and accuracy and is methodical in their approach to work. Has a high technical aptitude, interested in technology and staying current in their field. WHAT WE OFFER: Join a company that puts its employees first. Ranked as one of the Best Firms to Work For, here are just some of the reasons to become part of the McKim & Creed team: Employee Stock Ownership Plan (ESOP): All employees are owners & benefit from profits earned Competitive pay + paid holidays, bereavement and parental, medical, and military leave Growth opportunities & training: Grow confidently in your career with our mentoring & training options Professional development: Tuition reimbursement, early career professional program, online courses & more Work that makes a difference: See the direct impact your work has on our communities Collaborative, supportive team: People to help you solve problems, cheer successes & encourage you along the way We have an exciting opportunity to join our team. If you want to work at a company that will help improve the future of the communities where we live work and play, we're glad you found McKim & Creed. WATCH THIS VIDEO TO LEARN MORE ABOUT WHAT IT'S LIKE TO BE A PART OF OUR TEAM! McKim & Creed is an Equal Opportunity and Affirmative Action Employer, and VEVRAA Federal Contractor and will consider all qualified applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, protected veteran status or disability status and maintains a Drug Free Workplace.

Mercor is seeking experienced PyTorch experts who excel in extending and customizing the framework at the operator level. Ideal contributors are those who deeply understand PyTorch's dispatch system, ATen, autograd mechanics, and C++ extension interfaces. These contractors bridge research concepts and high-performance implementation, producing clear, maintainable operator definitions that integrate seamlessly into existing codebases. ### **2) Key Responsibilities** - Design and implement new PyTorch operators and tensor functions in C++/ATen. - Build and validate Python bindings with correct gradient propagation and test coverage. - Create “golden” reference implementations in eager mode for correctness validation. - Collaborate asynchronously with CUDA or systems engineers who handle low-level kernel optimization. - Profile, benchmark, and report performance trends at the operator and graph level. - Document assumptions, APIs, and performance metrics for reproducibility. ### **3) Ideal Qualifications** - Deep understanding of PyTorch internals (TensorIterator, dispatcher, autograd engine). - Strong background in C++17+ and template metaprogramming within PyTorch's ecosystem. - Experience authoring or extending PyTorch custom ops or backends. - Working knowledge of performance profiling tools and GPU/CPU interplay. - Strong written communication and ability to deliver well-documented, self-contained modules. - Prior open-source contributions to PyTorch, TorchInductor, Triton, or related projects are a plus. ### **4) More About the Opportunity** - Ideal for contractors who enjoy building clean, high-performance abstractions in deep learning frameworks. - Work is asynchronous, flexible, and outcome-oriented. - Collaborate with CUDA optimization specialists to integrate and validate kernels. - Projects may involve primitives used in state-of-the-art AI models and benchmarks. ### **5) Compensation & Contract Terms** - Typical range: **$100-$200/hour**, depending on experience and project scope. - Structured as an **independent contractor engagement**, not employment. - Payments for services rendered on a milestone or weekly invoice cadence. - Confidentiality and IP assignment agreements may apply. ### **6) Application Process** - Share a concise summary of your experience with PyTorch internals and systems-level programming. - Include links to open-source work, GitHub PRs, or sample operator implementations. - Provide hourly rate, availability, and relevant technical background. - Selected experts may complete a short, paid pilot module to demonstrate fit. ### **7) About Mercor** - **Mercor** connects top-tier independent professionals with leading AI labs and research organizations. - Contractors retain full control over their work, schedule, and deliverables. - Our engagements focus on high-skill, high-autonomy technical work across AI systems and optimization

SESCO Cement is a subsidiary of an international, diversified group of companies with revenues of $2.3 billion, and is a distributor of building materials. With a growing footprint of satellite locations and distribution partners across the U.S., they continue to expand their reach and realize their vision of bringing construction to an era of brighter possibilities, with a focus on providing customers with superior products to help them build and manufacture high-quality merchandise. Being an Equal Opportunity Employer, we strive to create a culture of community where anyone can reach their highest potential. This position will be part of a team that operates almost as a separate engineering and construction arm mostly handling capital projects. The growing demand in the construction and building materials industry has propelled them to invest in building new facilities that can help expand their market reach. This dynamic team is committed to providing excellent engineering, procurement, and construction services. They strive for top quality candidates to ensure their successful development. The type of projects the team works on ranges from full marine terminal design/procurement/construction, to planning and building out a network of satellite rail/barge terminals, to smaller scale expansions to each of the existing facilities. Additionally, as the company continues to expand and integrate vertically, there will be several new project types in these downstream markets, as well as the potential to provide these services externally. Position Overview As a Project Engineer you bring your commitment to excellence and unwavering work ethic. You will provide administrative and technical services in the fields of scheduling, cost engineering, subcontract coordination, and general project administration. Along with job site project managers and superintendents, you will have responsibilities in overall project oversight. The ideal candidate will communicate with respect, interact with integrity, be coachable and open to mentorship, and have fun while growing professionally (i.e. work hard/play hard). This is a tight-knit team that depends on each other's passion and skills to obtain results that are above average. If you enjoy being challenged, are curious by nature, and are willing to be exposed to all components of building a state-of-the-art import facility then this job might be a good fit. Our Tampa location is our newest addition to the SESCO Cement locations. With the terminal being in the construction phase, you will be part of the ground up growth of the terminal as it is moves towards completion. Once operational, you will work to continually improve the site through other projects as needed. Responsibilities This role will be heavily active in the field during the construction phase of a project, coordinating with subcontractors and crews, verifying quality of work, answering engineering questions and/or resolving issues that may pop up in real time. Assist in development of project plan as requested. Specifically, provide support to Project Manager(s) through helping to develop business cases by gathering requirements, building investment decision models, etc. Collaborate with the Project Manager(s) in purchasing activities including scoping and take-offs. Prepare and forward submittals. Confirm submittal complies with plans/specs. Support the development and updating of the project schedule and subcontractor detail schedules. Monitor and expedite material deliveries ensuring all deliveries conform with the project schedule. Administer subcontracts as assigned. Assist the Project Manager and Superintendent in the coordination of drawings. Draft change orders. Solicit prices from subcontractors and suppliers. Perform scope take-off and estimate costs. Aid in close out of project; includes assembling manuals and other warranties for turnover to owner and preparation final payment documents for subcontractors. Act as the point person for document management applications. Qualifications Bachelor's degree in engineering, construction management or related degree or equivalent experience. Must have 1-4 years of experience in the related field. Working knowledge of multiple engineering disciplines such as civil, structural, mechanical, electrical, piping, geotechnical, and surveying. Ability to read and understand engineering drawings and prepare them when applicable. Ability to read and understand Project financial documents and budgets and prepare them when applicable. MS Excel, MS Project, and AutoCAD/SolidWorks experience preferred. Highly motivated, with a demonstrated drive for excellence and taking initiative Strong work ethics, willing to do what it takes to get the job done right, efficiently and safely. Capable of using critical thinking to adapt to change and work in a fast-paced environment. Excellent interpersonal, written, and verbal communication skills, ability to establish and maintain effective relationships with colleagues, suppliers and clients. Team player with the ability to work independently to meet deadlines, goals, and objectives Strong organization, multitasking, time management skills, and attention to detail Participate in team building activities along with socialization. Physical Strain: Standard requirements. Bending, squatting, climbing, stooping, twisting and reaching will all be required occasionally in this position in office and at the construction site. Sitting for long periods of time Lifting 10 pounds maximum with occasional lifting and/or carrying of objects weighing up to 10 pounds May be required to work at heights of up to 25 feet.

CONMED is seeking an R&D Sustaining Engineer III - Electrical to join the Engineering team based in Largo, FL. The engineer will collaborate with cross functional teams to develop and support advanced surgical devices and powered instruments which are used in orthopedic and arthroscopic surgery products. The engineer will have immediate opportunities to contribute in a fast-paced, hands-on and game-changing environment. Duties and Responsibilities: Detailed design, analysis, and testing of electrical components and controls with consideration of performance, cost, manufacturability, and reliability. Embedded software development for medical device firmware components, including sensor interfaces, communication protocols, motor controls, etc. Working with a team to contribute to electronics hardware and firmware designs using a version control system such as Git. Maintaining legacy codebase projects developed over time by multiple contributors. General design activities such as requirements management, materials and component selection, Design Failure Modes and Effects Analysis (FMEA), and tolerance analyses. Develop, Analyze and optimize medical instrument firmware/software and troubleshoot failure modes. Drive sustaining engineering activities and continuous improvement of existing products and production equipment, as well as some support for new product development. Assist with designing and updating electronic circuit schematics, PCB layouts, and BOM's and make design decisions based on electronic component specification comparisons. Required Qualification: Bachelor's degree in electrical engineering or equivalent 5+ years of experience in R&D engineering within a medical instruments or other regulated industry (aerospace, automotive) and experience in analog and digital designs with the ability to troubleshoot to the component level. Preferred Qualifications: Strong balance of theoretical and practical experience. Must be "hands on" in an electronics lab environment and have experience using basic test equipment Experience with software and hardware motor control for brushless motors and analog sensors Understanding of control theory and experience generating control algorithms; real-time control functionality implementation in C/C++; Knowledge of FDA and ISO guidelines for the development of medical devices Experience with Version Control (such as Git), Issue Tracking (such as Jira), Eclipse based IDEs (such as MCUxpresso), and Requirements Management tools (such as ReqView) is a plus. Working knowledge/experience with CAD tools such as Altium-layout, logic experience is preferred Working knowledge of analog and digital electrical engineering signals and measurements Expected Travel 0-20% This position is not eligible for employer-visa sponsorship Disclosure as required by applicable law, the annual salary range for this position is $82,723 to 130,323. The actual compensation may vary based on geographic location, work experience, education, and skill level. The salary range is CONMED's good faith belief at the time of this posting. This job posting is anticipated to close on December 15, 2025. We may, however, extend this time period, in which case the posting will remain available on careers.conmed.com. Please submit your application as soon as possible as we will be reviewing applications on a rolling basis as we receive them. Benefits: CONMED offers a wide array of benefits to fit your unique needs. Visit our Benefits Page for more information. Competitive compensation Excellent healthcare including medical, dental, vision and prescription coverage Short & long term disability plus life insurance -- cost paid fully by CONMED Retirement Savings Plan (401K) -- CONMED matches your contributions dollar for dollar, with the potential for up to 7% per pay period Employee Stock Purchase Plan -- allows stock purchases at discounted price Tuition assistance for undergraduate and graduate level courses Know someone at CONMED? Have them submit you as a referral before applying for this position to be eligible for our Employee Referral Program incentives! CONMED is an equal opportunity employer and does not discriminate on the basis of any legally protected status or characteristic. Protected veterans and individuals with disabilities are encouraged to apply. The Know Your Rights: Workplace Discrimination is Illegal Poster reaffirms this commitment. Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. If you feel you need a reasonable accommodation pursuant to the ADA, you are encouraged to contact us at ************ option #5.

About Us: LidWorks is a drug-free workplace and an equal opportunity employer. We prohibit discrimination and harassment of any kind based on race, color, religion, age, sex, national origin, disability, genetics, veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by law. This policy applies to all terms and conditions of employment, including recruitment, hiring, placement, promotion, termination, compensation, benefits, and training. Position Overview: The Product Development Engineer will play a key role in driving product innovation from concept through production release. This includes leading new product design initiatives, improving existing designs, and managing project timelines while collaborating closely with cross-functional teams. The ideal candidate is a highly motivated, self-driven engineer with proven strengths in leadership, collaboration, project and time management, 3D CAD / SolidWorks, and mechanical design. Key Responsibilities: Manage multiple product development projects simultaneously, from initial concept through production tooling release, including project scheduling, timeline tracking, and progress reporting. Translate sales and customer requirements into functional 3D CAD thermoformed product designs, complete with dimensional specifications and performance criteria. Design prototype tooling, including machined aluminum forming cavities and matched metal trim tooling, and oversee prototype trials, sample evaluations, and submissions. Collaborate with Tooling Engineering and Production teams to ensure designs are optimized for machining, manufacturability, and thermoforming processes. Conduct functional and dimensional evaluations of products to determine their impact on final performance for both LidWorks and customer-supplied items. Create and maintain product specifications and provide support during production startup. Required Skills & Qualifications: Bachelor's degree in a technical field or equivalent relevant experience required. Minimum of 2 years of experience in a technical engineering role (plastics or product development experience preferred). Advanced proficiency in 3D CAD design, with SolidWorks experience required. Strong written and verbal communication skills, with the ability to collaborate effectively across departments. Proficiency in Microsoft Office applications. Solid understanding of engineering principles, design practices, and product development processes. Familiarity with plastic product design standards (e.g., shrinkage, draft angles) and general machining methods is a plus. Project management experience, with the ability to manage multiple priorities and deadlines. Benefits: Health Insurance Dental Insurance Vision Insurance Life Insurance Paid Time Off and Paid Holidays 401(k) Retirement Plan The pay benchmark for this position is entirely based on the applicant's experience.

Principal Mechanical Engineer to lead building system design of HVAC, Plumbing and Fire Protection systems. This is a leadership position to establish the mechanical team for a growing healthcare focused MEP firm with a quick path to equity. Job Description Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection. Required Qualifications: Bachelor's degree in mechanical engineering from an ABET-accredited program. 8+ years of related experience P.E. License Revit experience. Strong written and oral communication skills with both internal employees and external clients. Self motivated Preferred Qualifications: AHCA Experience Healthcare experience Additional Information All your information will be kept confidential according to EEO guidelines.

Principal Mechanical Engineer to lead building system design of HVAC, Plumbing and Fire Protection systems. This is a leadership position to establish the mechanical team for a growing healthcare focused MEP firm with a quick path to equity. Job Description Responsibilities: Establish an HVAC, Plumbing & Fire Protection team. Manage and mentor junior engineers. Develop technical deliverables; including construction plans & specifications. Coordinate with clients on project requirements and status updates. Coordinate with regulatory agencies to understand local permitting requirements and submit permit documents for review and approval. Perform construction administration duties; including attending and documenting project meetings, conducting site visits, reviewing shop drawings, and assisting with the development of change order, closeout, and other construction documentation. Perform onsite construction observation and inspection. Required Qualifications: Bachelor's degree in mechanical engineering from an ABET-accredited program. 8+ years of related experience P.E. License Revit experience. Strong written and oral communication skills with both internal employees and external clients. Self motivated Preferred Qualifications: AHCA Experience Healthcare experience Additional Information All your information will be kept confidential according to EEO guidelines.

Join our team at Core One! Our mission is to be at the forefront of devising analytical, operational and technical solutions to our Nation's most complex national security challenges. In order to achieve our mission, Core One values people first! We are committed to recruiting, nurturing, and retaining top talent! We offer a competitive total compensation package that sets us apart from our competition. Core One is a team-oriented, dynamic, and growing company that values exceptional performance! * This position requires an active TS/SCI clearance.* Responsibilities: * Applies their expertise and knowledge to technical projects, finding innovative, cost-effective means to improve research, techniques, procedures, and/or products and technologies. * Provides research engineering, technical, and managerial direction for problem definition, analysis, requirement development and implementation for complex systems in the engineering discipline. * Responsibilities include developing, conducting and evaluating new approaches to meet technical requirements faster and more efficiently. * Makes recommendations and advises on research development, improvements, optimization, or support efforts. * Performs risk assessments and innovative use of new research concepts or improved techniques and procedures. Requirements: * Bachelor's Degree * 5-10 years of applicable experience in a USCENTCOM Research Engineering role * Technical knowledge of research application analysis and programming * Experience devising procedures to solve complex defense systems capacity and limitations problems Security Clearance: * Active TS/SCI clearance is required Core One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

Validation & Engineering Group, Inc. is a leading services supplier who provides solutions for the Pharmaceutical, Biotechnology, Chemical, and Medical Devices industries in the following areas: Laboratory, Compliance, Computer, Engineering, Project Management, Validation, among other services in Puerto Rico and USA. Job Description The Molding Engineer is responsible to support the injection molding, tooling engineering, preventive maintenance, mold testing and evaluation, and project management areas. Review, developed and execute procedures to reduce cycle time, improved part quality and dimensional capabilities, mold condition, evaluation and tooling succession plan, dimensional and tolerance analysis, and spare parts analysis. Support and assist clients projects timelines among other responsibilities of the engineering department. Qualifications Bachelor degree in Engineering with 3 to 7 seven years of experiences in medical device industries, injection molding procedures (Micro, Bulk), Thermo, Mixing, Welding, Calibration and Preventive Maintenance. Experience in engineering assessments. Felicities & Utilities. Molding Strategies Equipment, Machines & instruments. Fully Bilingual (Spanish & English) Willing to work non-standard shifts, weekends, and holidays. Excellent technical writing Skills. Leadership and project management skills. Additional Information Positions available for Puerto Rico. Validation & Engineering Group, Inc is an Equal Employment Opportunity employer.

Join our team at Core One! Our mission is to be at the forefront of devising analytical, operational and technical solutions to our Nation's most complex national security challenges. In order to achieve our mission, Core One values people first! We are committed to recruiting, nurturing, and retaining top talent! We offer a competitive total compensation package that sets us apart from our competition. Core One is a team-oriented, dynamic, and growing company that values exceptional performance! *This position requires an active TS/SCI clearance.* Responsibilities: Applies their expertise and knowledge to technical projects, finding innovative, cost-effective means to improve research, techniques, procedures, and/or products and technologies. Provides research engineering, technical, and managerial direction for problem definition, analysis, requirement development and implementation for complex systems in the engineering discipline. Responsibilities include developing, conducting and evaluating new approaches to meet technical requirements faster and more efficiently. Makes recommendations and advises on research development, improvements, optimization, or support efforts. Performs risk assessments and innovative use of new research concepts or improved techniques and procedures. Requirements: Bachelor's Degree 5-10 years of applicable experience in a USCENTCOM Research Engineering role Technical knowledge of research application analysis and programming Experience devising procedures to solve complex defense systems capacity and limitations problems Security Clearance: Active TS/SCI clearance is required Core One is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, gender identity, sexual orientation, national origin, or protected veteran status and will not be discriminated against on the basis of disability.

JOB TITLE: (P) Manufacturing Engineer PAY RATE: Up to $43/hour We are a national aerospace and defense staffing agency seeking highly qualified candidates for a position with a top-tier client. Job Details: Job Type: Contract (12 months with potential for extension) Shift: Monday-Thursday, 3:30 PM - 2:00 AM EST Industry: Aerospace / Defense / Aviation Benefits: Medical, dental, and vision (Cigna) Perks: Bonus potential + Priority access via Tier 1 supplier Openings Nationwide: Thousands of opportunities across the U.S. Qualifying Questions: Are you a U.S. person as defined under ITAR regulations? Do you meet the educational and experience requirements for this role? Can you commute to the job location or relocate if necessary? Summary: Designs manufacturing processes, procedures, and production layouts for cable harness assemblies and subassemblies. Interprets engineering drawings to develop and optimize processes and collaborates with design engineering to improve manufacturability. Supports the production floor by partnering with operations to drive continuous improvement. Designs, procures, and implements tooling to support manufacturing processes and may incorporate inspection and test requirements into production planning. Monitors equipment and tool performance, investigates deficiencies, and initiates corrective actions to ensure product quality and process efficiency. Provides input to engineering on design concepts and specifications to optimize manufacturing methods. Ensures all processes and procedures comply with applicable regulations and specifications. Requirements: Bachelor's degree in Manufacturing, Mechanical, Industrial Engineering, or a related discipline Must understand cable assembly processes Must be able to read and write in English Must be a U.S. Person (as defined by ITAR). About Us: The Structures Company is a premier national aerospace and defense staffing agency specializing in contract, contract-to-hire, and direct hire placements. We deliver expert workforce solutions across engineering, IT, production, maintenance, and support roles. As trusted partners to major aerospace OEMs and Tier 1 suppliers, we connect professionals with opportunities to grow and excel in the aviation and aerospace industries. Eligibility Requirements: Must be a U.S. Citizen, lawful permanent resident, or protected individual under 8 U.S.C. 1324b(a)(3) to comply with ITAR regulations. Keywords: aerospace, aviation, engineering, maintenance, aircraft design, defense Take your career to new heights-apply today!

Full-time Description (Starting Wage, $80,000 + per year DOE) SUMMARY - Manage and improve all processes with the WHK medical device manufacturing department. Work with Quality to ensure all systems are in compliance with ISO 13485. Implement new processes and assist with onboarding of all new business. Set-up and manage all BOM's and Routings in ERP system for new part introduction and for any process changes. Promote safety, housekeeping and area improvement initiatives. REQUIREMENTS/EDUCATION and/or EXPERIENCE - College degree (BS) required in an Engineering discipline. Must have minimum of 3 years manufacturing experience in an ISO 13485 regulated environment. Must have experience working in a Clean Room environment. Prior hands-on experience with injection molding and extrusion machinery required. Lean 6 Sigma training and certification highly desired. MS Office experience required; Outlook, Excel and PowerPoint. Requirements ESSENTIAL DUTIES AND RESPONSIBILITIES include the following. • Work with Quality to ensure that all processes are in compliance with ISO 13485 requirements. • Write IQ/OQ/PQ validation protocols, execute validation protocols for new equipment and process changes and write summary reports for management review and approval of all validations. • Lead, participate and assist in root cause analysis of customer complaints and process waste issues with accountability for corrective action implementation. • Ability to assist with developing machine specifications for new equipment and ability to develop and modify equipment layout to generate process flow. • Ability to identify potential equipment upgrades and/or new equipment requirements and the ability to complete cost analysis and justification for any capital request. • Understanding of Continuous Improvement tools and Lean 6 Sigma concepts and the ability to guide Kaizen events and improvement efforts. • Must possess project management skills and the ability to multitask. Attention to meeting deadlines and customer commitments is critical. • Interact with customers concerning inquiries. Take new products from inception to prototype and into production. • Ability to work within a Clean Room environment and possess working knowledge of acceptable practices and management of change in such an environment. • Good communication skills and the ability to get along well with others in a team environment a must. • Ability to create part drawing, tool drawings and 3D models of new parts and assemblies • Develop, monitor and report key production KPI's during daily production meetings. • Ability to create work instructions, batch sheets and process standard work for existing and new operations. • Assist with coordination of equipment calibration program as well as management of equipment Preventive and Predictive maintenance programs • Re-visit established production methods to seek out opportunities for improvement in safety, quality and productivity. • Assist with special projects as needed

Join American Structurepoint and become part of a team that goes the extra mile for our clients and communities. We live by our values - respect, staff development, results and family. Our team is encouraged to explore new ideas and turn our clients' dreams into reality. With exceptional benefits, training, and mentorship, we pave the way for a rewarding career. Ready for more than just a job? Explore opportunities with us and help improve the quality of life in the communities we serve. American Structurepoint's Road Engineering Group is seeking an entry-level Staff Engineer in Tampa, FL! In this role you'll work as part of a close-knit team on roadway projects for FDOT, cities, towns, and counties throughout Florida. Most of your work will take place in the office, with occasional site visits, as you assist with quantity takeoffs, create construction plan sets using MicroStation OpenRoads Designer (ORD), prepare design documentation, and develop construction cost estimates. From large interstate and interchange projects to urban reconstructions, rural maintenance, and roundabouts, you'll gain hands-on experience across a wide variety of impactful transportation projects. As a company, we are committed to living our values every day and providing you with the support and opportunities to build a fulfilling career while helping to shape Florida's infrastructure. Why start your career American Structurepoint: Onboarding & Training: Learn from experienced professionals and build meaningful, long-term relationships Mentorship & Career Growth: Receive support and guidance as you grow your skills and advance your career Real Projects: Contribute to high-profile, community-impacting projects from day one Industry Connections & Networking: Take advantage of exclusive industry connections and professional opportunities Future Focused: Build a strong foundation for a long, successful career with opportunities to grow within the firm Responsibilities What you will do: Assist with the design and layout of roadway alignments, both horizontal and vertical, for real-world transportation projects Get involved in key aspects of roadway design, including geometry, drainage, signage, pavement markings, and maintenance of traffic Help develop construction plan sets, gaining experience in how projects are prepared for bidding and construction Perform quantity calculations to support bid plan development and construction cost estimates Explore additional areas like pavement analysis, design, and utility coordination for a well-rounded experience Take on a variety of project support tasks, learning how transportation engineering projects come to life from concept to construction Other duties as assigned Qualifications Who you are: Recent or soon-to-be graduate with a bachelor's degree in civil engineering 0-4 years of relevant experience, such as internships, co-ops, academic projects, or entry-level engineering roles Options Apply for this job online Email this job to a friend Refer Sorry the Share function is not working properly at this moment. Please refresh the page and try again later. Share on your newsfeed American Structurepoint is an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability status, protected veteran status or any other characteristic protected by law.