Senior electrical engineer jobs in Topeka, KS - 119 jobs

All

Senior Electrical Engineer

Electrical Engineer

Electronics Engineer

Senior Electronic Engineer

Electrical Engineer Internship

Lead Controls Engineer

Senior Project Engineer

Instrumentation & Control Engineer

Senior Electrical Design Engineer

Staff Design Engineer

Controls Engineer

Senior Principal Engineer

Senior Design Engineer

Senior Engineer

Electrical Engineer III
Aerovironment 4.6
Senior electrical engineer job in Lawrence, KS
The Electrical Engineer III designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. In this role, one selects components and equipment based on analysis of specifications and reliability as well as determines design approaches & parameters. Conducts general engineering and design of electronic systems on small unmanned aircraft vehicles with cross-functional teams. Position Responsibilities + Performs simulation and detailed design for digital and analog circuits + Drives system integration, assembly procedures, and test procedures + Documents designs with engineering drawings and written descriptions + Trouble-shoots complex systems from a hardware and software perspective + Designs, builds, and tests prototypes expediently and efficiently + Works with avionics, embedded systems, and RF links. Writes software to support the integration of sensors and embedded processors + Designs and implements circuit boards. This includes architecture, component selection, schematic capture, board layout, board bring-up, and documentation + Performs electronic engineering support activities on R&D projects. Performs design & analysis tasks and writes fabrication & test procedures + Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors + Follows standard practices and procedures when analyzing situations or data from which answers can be readily obtained + Other duties as assigned Basic Qualifications (Required Skills & Experience) + B.S. Degree in Electrical Engineering is required or equivalent combination of education, training, and experience + Minimum of 5 - 8 years of relevant experience + Proficient with office software, computer-based productivity tools and other software tools in one's area of expertise + Experienced using Altium Designer for schematic capture and PCB layout + Experienced in one or more areas: Radio Frequency (RF), embedded control, FPGA + Experienced with power electronics, including motors and Battery Technology (lead acid, Nickel metal hydride & Lithium ion) + Demonstrated competency in troubleshooting complex systems + Demonstrated familiarity of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB) + Knowledge of general Engineering fundamentals, mathematics, physics & material properties + Some travel may be required in support of flight test operations (up to 30%) + Must have a clean driving record Other Qualifications & Desired Competencies + Advanced degree is preferred + Flight test or R/C (Remote Control) experience a plus, hands-on experience with tools a plus + Demonstrates familiarity with Small UAV subsystems and associated software + Demonstrates consistency in complying with company's policies and procedures + Resolves a wide range of issues in creative ways + Demonstrates sound judgement in selection of methods and techniques for obtaining solutions + Shares ideas and experiences with others, solicits feedback and asks relevant questions + Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties + Displays strong initiative and drive to accomplish goals and meet company objectives + Takes ownership and responsibility for current and past work products + Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company + Has effective problem-solving, analytical, interpersonal and communication skills. + Team Player - Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands + Ability to work in an office and manufacturing environment (Constant) + Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $93,371 - $132,300 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. **ITAR Requirement:** _T_ _his position requires access to information that is subject to compliance with the International Traffic Arms Regulations ("ITAR") and/or the Export Administration Regulations ("EAR"). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A "U.S. person" according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements._ **Benefits** : AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************* . We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. **Who We Are** Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. **What We Do** Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. _We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status._ **ITAR** U.S. Citizenship required **About AV:** **AV isn't for everyone. We hire the curious, the relentless, the mission-obsessed. The best of the best.** We don't just build defense technology-we redefine what's possible. As the premier autonomous systems company in the U.S., AV delivers breakthrough capabilities across air, land, sea, space, and cyber. From AI-powered drones and loitering munitions to integrated autonomy and space resilience, our technologies shape the future of warfare and protect those who serve. Founded by legendary innovator Dr. Paul MacCready, AV has spent over 50 years pushing the boundaries of what unmanned systems can do. Our heritage includes seven platforms in the Smithsonian-but we're not building history, we're building what's next. **If you're ready to build technology that matters-with speed, scale, and purpose-there's no better place to do it than AV.** **Careers at AeroVironment (*****************************************
$93.4k-132.3k yearly 60d+ ago

Looking for a job?

Let Zippia find it for you.

Lead Controls Engineer - TSO
The J. M. Smucker Company 4.8
Senior electrical engineer job in Topeka, KS
Your Opportunity a Lead Controls Engineer - TSO The Lead Controls Engineer will lead and support automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include setting and maintaining engineering standards, engaging vendors to drive innovation, and providing corporate technical support. While collaborating closely with plant leadership, engineering, and operations teams, this role focuses on accelerating automation and technology through smaller, less complex projects that deliver impactful improvements. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: Approximately 30% Travel to other sites 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: Projects: Support, lead, or manage smaller automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: Bachelor's degree in engineering or 15+ years of equivalent plant experience 5+ years in controls/automation 3+ years in manufacturing Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) Mechanical/electrical experience in food manufacturing Ability to collaborate across departments and sites Remote management capability Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: Regularly required to talk and hear. Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. Able to lift objects up to 50 pounds frequently. May push and pull heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA
$92k-111k yearly est. Auto-Apply 12d ago
Lead Controls Engineer - TSO
Smuckers
Senior electrical engineer job in Topeka, KS
Your Opportunity a Lead Controls Engineer - TSO The Lead Controls Engineer will lead and support automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include setting and maintaining engineering standards, engaging vendors to drive innovation, and providing corporate technical support. While collaborating closely with plant leadership, engineering, and operations teams, this role focuses on accelerating automation and technology through smaller, less complex projects that deliver impactful improvements. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: * Approximately 30% Travel to other sites * 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: * Projects: Support, lead, or manage smaller automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). * Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. * Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. * Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. * Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. * Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: * Bachelor's degree in engineering or 15+ years of equivalent plant experience * 5+ years in controls/automation * 3+ years in manufacturing * Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) * Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: * Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) * Mechanical/electrical experience in food manufacturing * Ability to collaborate across departments and sites * Remote management capability * Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: * Regularly required to talk and hear. * Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. * Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. * Able to lift objects up to 50 pounds frequently. * May push and pull heavy objects. * Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA
$79k-101k yearly est. Auto-Apply 11d ago
Electrical Engineer - Generation Development & Construction
Westar Energy 4.7
Senior electrical engineer job in Topeka, KS
Electrical Engineer - Generation Development & Construction - (TRE001N) JOB TITLE: Electrical Engineer - Generation Development & ConstructionREQUISITION: TRE001NLOCATION: Kansas City, MO or Topeka, KSDEPARTMENT: DevelopmentPAY RANGE: Engineer II - $66,300 - $82,900Staff Engineer: $90,500 - $113,100 Sr Engineer: $91,600 - $122,100 Lead Engineer: $107,900 - $143,800 Scheduled Work Hours: Monday - Friday 8:00 a. m. - 5:00 p. m. However, hours can be irregular. Nights, weekends, and extra hours will be required as conditions dictate. Travel will be required in support of development of convention generation projects. Additional overnight travel will be required. SummaryEvergy is committed to leading the Responsible Portfolio Transition. Evergy's 2025 Triennial Integrated Resource Plan (IRP) called for 3,024 MWs of new wind and solar and 4,430 MWs of new conventional generating assets over the next ten years. Seeking a technically strong and collaborative Electrical Engineer to support the development, construction, and commissioning of conventional generation projects. Reporting to the Manager - Conventional Generation Projects Engineering, the candidate has technical responsibility to support the development of conventional generation projects. The engineer will work closely with Project Managers, Owner's Engineer (OE), EPC Contractors, Major Equipment Supplier, and internal Transmission & Substation (T&S) teams to ensure safe, timely, cost-effective, and environmentally sound project delivery. The engineer will assist with projects that are complex, multi-million-dollar capital projects with multi-year timeframes that span diverse disciplines. The type of projects will include conventional generation including simple cycle combustion turbines, and combined cycle combustion turbines. This candidate will provide engineering support to the development, construction and commissioning of electrical systems. Key Responsibilities: Provide technical oversight to enforce contract requirements on EPC Contractors and Major Equipment Suppliers. Coordinate with OE, EPC, Power Island Suppliers, and internal T&S teams to ensure project success. Promote safety and contribute to a positive team culture. Support multi-disciplinary, multi-year capital projects with high complexity and value. Review electrical system designs: single-line diagrams, load lists, cable schedules, and protection schemes. Ensure grid compliance and adherence to interconnection and utility standards. Evaluate system integration across GT, ST, HRSG, and BOP. Advise on layout, grounding, and reliability improvements. Review technical specifications for major electrical equipment: transformers, switchgear, MCCs, cables, relays, UPS, etc. Participate in vendor evaluations and ensure technical compliance. Witness Factory Acceptance Tests (FATs) for critical electrical components. Monitor delivery schedules to support construction milestones. Education and Experience Requirements:This position requires a minimum bachelor's degree in electrical engineering with at least 2 years of engineering experience in the design, construction and/or maintenance of power plant electrical systems including generators and exciters. The applicant must be willing to work nights and weekends as needed. Additional Skills, Knowledge, and Abilities:Knowledge of electrical systems including generator, exciters, relay protection required. Troubleshooting and commissioning with generators, exciters, replay protection is expected. The successful candidate must possess high initiative and strong interpersonal skills and exhibit good computer skills. Licenses or Certificates Required:Must have valid driver's license. Must have satisfactory work record including good attendance. EIT or PE is preferred Working Conditions:Must have the ability to perform the physical activities of the job. Requires extensive on site plant work with some office work. Requires the ability to work outdoors and in an industrial plant environment including, but not limited to, exposure to ambient temperature extremes, dusty/moist environments, climbing ladders and stairways, working at heights on elevated structures and platforms, and working in cramped spaces occasionally which may require bending, stooping, and standing. Travel is expected to development sites at least 10% of the time up to 100% during peak construction and commissioning. Extensive in-state and out of state travel required. Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know to accomplish becoming the most innovative and reliable energy company, we need a team with a variety of backgrounds, perspectives and skills. So, our goal is to be a diverse workforce that is representative of the communities we serve. We are committed to celebrating diversity and building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. We know that the more diverse and inclusive we are, the better we will be. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer. Disclaimer: The above information has been designed to indicate the general nature and level of work performed by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities, and qualifications required of employees assigned to this job. Work Locations: 1KC - Missouri HQ - Floor 18 One Kansas City Place 1200 Main St Kansas City 64105Job: EngineeringShift: Unposting Date: Ongoing
$107.9k-143.8k yearly Auto-Apply 49d ago
Staff Conversational AI Designer
General Motors 4.6
Senior electrical engineer job in Topeka, KS
**About the Role:** We are looking for a talented, curious, and highly motivated Staff Conversational AI Designer to join our Voice & Sound team. The ideal candidate will breathe design and have deep expertise in Voice and Multimodal interfaces. You will join a team of experts working on end-to-end multimodal customer experiences, driving innovation in the rapidly evolving and expanding high-tech world of AI through user-centric practices and design. In this role, you will lead with vision and collaborate with other designers, researchers, technologists, and product stakeholders to craft effective and exceptional experiences through data-driven design. **Responsibilities:** + Lead design vision and execution for AI-based conversational and multimodal experiences, advocating usability and user-centered design principles. + Develop and promote conversation design best practice standards, reusable interactional patterns, and processes. + Deliver effective design documentation to communicate experience requirements, design principles, best practices, prototypes, and multimodal flows to convey voice forward interactions that leverage AI. + Identify opportunities for usability testing and research efforts by leading and supporting the creation of prototypes, participating in clinic sessions, analyzing, brainstorming, ideating etc. + Build strong relationships with internal stakeholders to understand priorities, collaborate on actions to implement product and service solutions, and ensure a connected end-to-end user experience. + Identify, track, and monitor industry/experience trends and drivers of customer needs and satisfaction. + Lead visualization of experiences using storyboards, customer journeys, user flows, low-fidelity wireframes and voice prototypes to illustrate vision and influence impactful experiences in AI + Balance user needs, technical constraints, and product objectives to solve problems effectively, crafting world-class multimodal user experiences. **Requirements:** + 9 + years creating conversational design experiences. + Ability to combine vision with strong creative design execution. + Strong portfolio with work samples showcasing expertise, craft, aesthetics, and depth of thought. + Experience designing for Generative or Agentive AI-powered experiences + Understanding of machine learning & natural language processing (NLP) fundamentals. + Experience incorporating research into the design process. + Subjet-matter expert. Ability to work independently, be organized, self-motivated, and have attention to detail. + Excellent written, visual, and verbal communication skills. + Proficient in common design tools (e.g.Figma, VoiceFlow, ProtoPie, etc). + Demonstrated experience documenting for **voice-only, voice-forward, and multi-modal** experiences + **Demonstrated experience** **creating interactive** prototypes formultimodal experiences (voice, sound, visuals, touch, chat, etc) **Preferred** **Qualifications:** + Deep understanding of Generative AI for Conversational Experiences, foundational elements of Conversation Design, and LLMs. + Ability to communicate technical concepts to a non-technical audience (verbal and written). + Ability to work effectively within an environment that leverages robust design systems and libraries, while seeking to delight and impress users with innovative concepts and experiences. **About GM** Our vision is a world with Zero Crashes, Zero Emissions and Zero Congestion and we embrace the responsibility to lead the change that will make our world better, safer and more equitable for all. **Why Join Us** We believe we all must make a choice every day - individually and collectively - to drive meaningful change through our words, our deeds and our culture. Every day, we want every employee to feel they belong to one General Motors team. **Benefits Overview** From day one, we're looking out for your well-being-at work and at home-so you can focus on realizing your ambitions. Learn how GM supports a rewarding career that rewards you personally by visiting Total Rewards resources (************************************************************* . **Non-Discrimination and Equal Employment Opportunities (U.S.)** General Motors is committed to being a workplace that is not only free of unlawful discrimination, but one that genuinely fosters inclusion and belonging. We strongly believe that providing an inclusive workplace creates an environment in which our employees can thrive and develop better products for our customers. All employment decisions are made on a non-discriminatory basis without regard to sex, race, color, national origin, citizenship status, religion, age, disability, pregnancy or maternity status, sexual orientation, gender identity, status as a veteran or protected veteran, or any other similarly protected status in accordance with federal, state and local laws. We encourage interested candidates to review the key responsibilities and qualifications for each role and apply for any positions that match their skills and capabilities. Applicants in the recruitment process may be required, where applicable, to successfully complete a role-related assessment(s) and/or a pre-employment screening prior to beginning employment. To learn more, visit How we Hire (********************************************* . **Accommodations** General Motors offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email (Careers.Accommodations@GM.com) us or call us at ************. In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying. We are leading the change to make our world better, safer and more equitable for all through our actions and how we behave. Learn more about: **Our Company (************************************************** **Our Culture** **How we hire (************************************************ Our diverse team of employees bring their collective passion for engineering, technology and design to deliver on our vision of a world with Zero Crashes, Zero Emissions and Zero Congestion. We are looking for adventure-seekers and imaginative thought leaders to help us transform mobility. Explore our global locations (******************************************** We are determined to lead change for the world through technology, ingenuity and harnessing the creativity of our diverse team. Join us to help lead the change that will make our world better, safer and more equitable for all by becoming a member of GM's Talent Community (beamery.com) (*********************************************** . As a part of our Talent Community, you will receive updates about GM, open roles, career insights and more. Please note that filling out the form below will not add you to our Talent Community automatically; you will need to use the link above. If you are seeking to apply to a specific role, we encourage you to click "Apply Now" on the job posting of interest. The policy of General Motors is to extend opportunities to qualified applicants and employees on an equal basis regardless of an individual's age, race, color, sex, religion, national origin, disability, sexual orientation, gender identity/expression or veteran status. Additionally, General Motors is committed to being an Equal Employment Opportunity Employer and offers opportunities to all job seekers including individuals with disabilities. If you need a reasonable accommodation to assist with your job search or application for employment, email us at Careers.Accommodations@GM.com .In your email, please include a description of the specific accommodation you are requesting as well as the job title and requisition number of the position for which you are applying.
$91k-108k yearly est. 28d ago
Electrical Engineer - Generation Development %26 Construction
Evergy
Senior electrical engineer job in Topeka, KS
JOB TITLE: Electrical Engineer - Generation Development & Construction DEPARTMENT: Development PAY RANGE: Engineer II - $66,300 - $82,900 Staff Engineer: $90,500 - $113,100 Sr Engineer: $91,600 - $122,100 Lead Engineer: $107,900 - $143,800 Scheduled Work Hours: Monday - Friday 8:00 a.m. - 5:00 p.m. However, hours can be irregular. Nights, weekends, and extra hours will be required as conditions dictate. Travel will be required in support of development of convention generation projects. Additional overnight travel will be required. Summary Evergy is committed to leading the Responsible Portfolio Transition. Evergy's 2025 Triennial Integrated Resource Plan (IRP) called for 3,024 MWs of new wind and solar and 4,430 MWs of new conventional generating assets over the next ten years. Seeking a technically strong and collaborative Electrical Engineer to support the development, construction, and commissioning of conventional generation projects. Reporting to the Manager - Conventional Generation Projects Engineering, the candidate has technical responsibility to support the development of conventional generation projects. The engineer will work closely with Project Managers, Owner's Engineer (OE), EPC Contractors, Major Equipment Supplier, and internal Transmission & Substation (T&S) teams to ensure safe, timely, cost-effective, and environmentally sound project delivery. The engineer will assist with projects that are complex, multi-million-dollar capital projects with multi-year timeframes that span diverse disciplines. The type of projects will include conventional generation including simple cycle combustion turbines, and combined cycle combustion turbines. This candidate will provide engineering support to the development, construction and commissioning of electrical systems. Key Responsibilities: * Provide technical oversight to enforce contract requirements on EPC Contractors and Major Equipment Suppliers. * Coordinate with OE, EPC, Power Island Suppliers, and internal T&S teams to ensure project success. * Promote safety and contribute to a positive team culture. * Support multi-disciplinary, multi-year capital projects with high complexity and value. * Review electrical system designs: single-line diagrams, load lists, cable schedules, and protection schemes. * Ensure grid compliance and adherence to interconnection and utility standards. * Evaluate system integration across GT, ST, HRSG, and BOP. * Advise on layout, grounding, and reliability improvements. Review technical specifications for major electrical equipment: transformers, switchgear, MCCs, cables, relays, UPS, etc. * Participate in vendor evaluations and ensure technical compliance. * Witness Factory Acceptance Tests (FATs) for critical electrical components. * Monitor delivery schedules to support construction milestones. Education and Experience Requirements: This position requires a minimum bachelor's degree in electrical engineering with at least 2 years of engineering experience in the design, construction and/or maintenance of power plant electrical systems including generators and exciters. The applicant must be willing to work nights and weekends as needed. Additional Skills, Knowledge, and Abilities: Knowledge of electrical systems including generator, exciters, relay protection required. Troubleshooting and commissioning with generators, exciters, replay protection is expected. The successful candidate must possess high initiative and strong interpersonal skills and exhibit good computer skills. Licenses or Certificates Required: Must have valid driver's license. Must have satisfactory work record including good attendance. EIT or PE is preferred Working Conditions: Must have the ability to perform the physical activities of the job. Requires extensive on site plant work with some office work. Requires the ability to work outdoors and in an industrial plant environment including, but not limited to, exposure to ambient temperature extremes, dusty/moist environments, climbing ladders and stairways, working at heights on elevated structures and platforms, and working in cramped spaces occasionally which may require bending, stooping, and standing. Travel is expected to development sites at least 10% of the time up to 100% during peak construction and commissioning. Extensive in-state and out of state travel required. Evergy has a clear mission - To empower a better future. Evergy chooses to live this mission by valuing People First. We know to accomplish becoming the most innovative and reliable energy company, we need a team with a variety of backgrounds, perspectives and skills. So, our goal is to be a diverse workforce that is representative of the communities we serve. We are committed to celebrating diversity and building a team where everyone - regardless of race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status - has a voice and can bring their best every day. We know that the more diverse and inclusive we are, the better we will be. Evergy is proud to be an equal opportunity workplace and is an affirmative action employer.
$107.9k-143.8k yearly 49d ago
Senior Electrical Engineer-Federal Engineering & Design Team
Olsson 4.7
Senior electrical engineer job in Topeka, KS
Arizona - Remote; Arkansas - Remote; Kansas - Remote; Missouri - Remote; Nebraska - Remote; Texas - Remote ** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** Join Olsson's Federal Engineering & Design Team as a Senior Electrical Engineer. At Olsson, you'll play a key role in shaping projects that support military bases, VA campuses, and other vital government facilities. Join a high-performing, collaborative team dedicated to delivering innovative, engineering solutions that meet rigorous federal standards and exceed client expectations. Acting as lead design engineer, you will spearhead some of the firm's most demanding projects. You will be responsible for designing and coordinating electrical systems using Revit including the creation of Construction Documents and specifications. Responsibilities include coordinating with other disciplines, performing supporting calculations, meeting with clients to discuss conceptual and final designs, and travel to job sites for observation, coordination, and investigation. Our electrical design services can include power distribution, lighting, and electrical modeling. This position may involve travel to job sites for observation and client meetings and offers the opportunity to contribute meaningfully to Olsson's growing federal portfolio. **Key Responsibilities** As a Senior Electrical Engineer, you'll take ownership of electrical systems and coordination across a range of federal projects. Your day-to-day will include: + Design electrical systems for federal buildings, upgrade power distribution networks, and ensure compliance with safety codes and environmental regulations. + Implement renewable energy initiatives while improving overall energy efficiency for federal facilities. + Conduct site surveys and troubleshoot electrical installations to ensure reliability and performance. + Prepare detailed design drawings, technical specifications, project status reports, manuals, and compliance documentation. + Ensure all designs and installations align with the National Electrical Code (NEC), NFPA standards, federal agency requirements, and environmental regulations. + Plan and manage project budgets, schedules, and proposals while coordinating teams across federal agency projects. + Mentor junior staff. + Assist in the recruiting for the federal team + Represent Olsson in client meetings and site visits, providing expert guidance from concept through construction and ensuring client satisfaction. **Preferred Qualifications** + Bachelor's or Master's degree in Electrical Engineering. + Professional Engineer (PE) license is required. + Minimum 8 years of experience in electrical design, ideally with federal clients. + Proficiency in Revit and AutoCAD and other relevant design software. + Deep understanding of DoD, VA, and federal design standards and processes. + Exceptional communication skills and proven ability to coordinate complex projects. **Why Join Us** + Contribute to projects that serve national interests and make a difference in communities. + Flexible work arrangements, including remote options. + Enjoy flexible work arrangements, including remote options, to support your work-life balance. + Thrive in a supportive culture that values professional development and teamwork. At Olsson, your expertise drives progress on projects that matter. If you're passionate about federal engineering and ready to elevate your career, we want to hear from you. \#LI-HH1 **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.
$80k-104k yearly est. 12d ago
Sr. Power Electronics Engineer (Digital Controls Engineer)
TT Electronics
Senior electrical engineer job in Olathe, KS
COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to solving technology challenges for a sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. Introduction This position will help the team develop flight-worthy safety critical electronic hardware, power supplies, embedded software, and magnetics for our Aerospace and Defense customers. We are a team of co-located electrical, mechanical, software, test, and project management engineers under one manager. These disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and help establish production processes. Key Responsibilities Work with a multidisciplinary team of scientists, engineers, and technicians pushing state-of-the-art design for analog and digitally controlled power converters. Develop new power conversion products based on technology and turn theory into reality. Provide technical leadership in power product development. Design, troubleshoot, validate 115VAC, 400 Hz to 28-800VDC, 1kW-20kW, 1 and 3-phase active power converters and motor control products for aerospace applications. Design and troubleshoot DC-DC power converters from 0.8V to 800V and 100W to 20kW range. Develop schematics and supervise PCB layouts. System integration in a team environment, to create specifications and develop test scenarios. Other duties, as assigned. Core Requirements Excellent practical knowledge on converter topology and digital control algorithm development. Practical knowledge on PFC and full bridge phase shift ZCS and ZVS converter developments. Working experience with PCB bring-up and lab testing. Strong understanding of analog circuit design and theory. Demonstrated commitment to excellence in all aspects of work. Strong sense of ownership and accountability for assigned responsibilities. Effective active listening and communication skills. Sound judgment and confident decision-making abilities. Ability to work independently with minimal supervision. Willingness to contribute with a hands-on, collaborative approach in a team-oriented environment. Proficiency in Microsoft Office Suite, MS Project or Smartsheet, and Epicor ERP. Must be available to work on-site, in either Olathe, KS or Plano, TX. Qualifications, Skills and Attributes Desirable Skills and Experience Bachelor of Science in Electrical Engineering with a minimum of three years related experience, or a relevant degree and five years of related work experience. Experience with DFX, aerospace, and MIL standard knowledge (e.g., DO160, MIL-STD-461, MIL-STD-704, etc.). Proficiency with OrCAD Designer or other PCB design software and experience designing and/or building prototype boards. Visionary mindset with a focus on the long-term success of the team and organization. Proven interpersonal and leadership skills with the ability to motivate and influence others.Highly organized with exceptional attention to detail; able to manage multiple priorities and drive tasks to completion. Strong written and verbal communication skills, with the ability to effectively engage with internal and external stakeholders and represent the organization professionally. This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. TTT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired. Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT
$74k-99k yearly est. Auto-Apply 60d+ ago
Electrical Engineer III
Insight Global
Senior electrical engineer job in Lawrence, KS
The Electrical Engineer III designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. In this role, one selects components and equipment based on analysis of specifications and reliability as well as determines design approaches & parameters. Conducts general engineering and design of electronic systems on small unmanned aircraft vehicles with cross-functional teams. Position Responsibilities: Performs simulation and detailed design for digital and analog circuits Drives system integration, assembly procedures, and test procedures Documents designs with engineering drawings and written descriptions Trouble-shoots complex systems from a hardware and software perspective Designs, builds, and tests prototypes expediently and efficiently Works with avionics, embedded systems, and RF links. Writes software to support the integration of sensors and embedded processors Designs and implements circuit boards. This includes architecture, component selection, schematic capture, board layout, board bring-up, and documentation Performs electronic engineering support activities on R&D projects. Performs design & analysis tasks and writes fabrication & test procedures Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors Follows standard practices and procedures when analyzing situations or data from which answers can be readily obtained Other duties as assigned We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements - B.S. Degree in Electrical Engineering is required or equivalent combination of education, training, and experience - Minimum of 5 - 8 years of relevant experience - Proficient with office software, computer-based productivity tools and other software tools in one's area of expertise - Experienced using Altium Designer for schematic capture and PCB layout - Experienced in one or more areas: Radio Frequency (RF), embedded control, FPGA Experienced with power electronics, including motors and Battery Technology (lead acid, Nickel metal hydride & Lithium ion) - Demonstrated competency in troubleshooting complex systems - Demonstrated familiarity of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB) - Knowledge of general Engineering fundamentals, mathematics, physics & material properties Some travel may be required in support of flight test operations (up to 30%) - Must have a clean driving record
$62k-82k yearly est. 48d ago
Senior Principal Data Engineer
UKG 4.6
Senior electrical engineer job in Topeka, KS
**Why UKG** At UKG, the work you do matters. The code you ship, the decisions you make, and the care you show a customer all add up to real impact. Today, tens of millions of workers start and end their days with our workforce operating platform. Helping people get paid, grow in their careers, and shape the future of their industries. That's what we do. We never stop learning. We never stop challenging the norm. We push for better, and we celebrate the wins along the way. Here, you'll get flexibility that's real, benefits you can count on, and a team that succeeds together. Because at UKG, your work matters-and so do you. **About the Role** As a Senior Principal Data Engineer within the Enterprise Data & Analytics Office, you will lead the design, evolution, and operational excellence of Nexus, UKG's unified, GCP-based data platform, enabling analytics, AI, and enterprise decision-making at scale. You will translate architectural vision into reliable, scalable, cost-efficient data systems, lead platform modernization efforts, and set the engineering bar for data ingestion, transformation, and operational analytics across UKG. **Key Responsibilities:** Enterprise Data Engineering Leadership - Drive the implementation of standardized medallion architecture (Bronze-Silver-Gold) across all domains. - Establish and enforce engineering patterns for batch, streaming, CDC, and event-driven pipelines. - Drive design patterns for Fact and Dimension modeling, data mesh, and change data capture (CDC). Platform & Pipeline Excellence - Design and evolve scalable data pipelines using GCP-native services (BigQuery, GCS, Composer, Pub/Sub, Dataflow) and Databricks (Delta Lake, DLT). - Ensure platform reliability, performance, and scalability for petabyte-scale analytics workloads. - Lead engineering decisions around partitioning, clustering, query optimization, and cost controls (FinOps). - Own observability standards (freshness, SLAs, error handling, monitoring). Engineering Standards, Quality & Governance - Define and enforce engineering standards for data quality, testing, CI/CD, and production readiness. - Implement automated data quality frameworks, lineage, and metadata integration in partnership with Data Governance and Architecture teams. - Ensure all pipelines meet SOX, security, and auditability requirements. - Partner with Architects to ensure engineering implementations align to enterprise reference architectures. Cross-Functional Delivery & Influence - Partner with Product Managers, Product Owners, Architects, and Analytics leaders to deliver high-impact data capabilities. - Act as the technical escalation point for complex production issues and platform risks. - Influence roadmap decisions by balancing technical feasibility, delivery velocity, and long-term sustainability. - Support ESE Agile delivery by enabling architecture runway and reducing technical blockers. Mentorship & Organizational Impact - Mentor Principal, Senior, and Mid-level Data Engineers, raising the overall engineering maturity of the organization. - Lead by example through design reviews, code reviews, and engineering forums. - Build reusable frameworks, libraries, and accelerators that scale engineering productivity. - Foster a culture of ownership, quality, and continuous improvement. **Basic Qualifications:** - 15+ years of experience in data engineering, data platforms, or large-scale analytics systems. - Proven leadership delivering enterprise-scale data platforms and migrations. - Deep hands-on experience large (Petabyte) scale operating data platforms . Technical Expertise - GCP (required): BigQuery, GCS, Cloud Composer, Pub/Sub, Dataflow, Dataform, Dataproc, Dataplex - Databricks: Delta Lake, Delta Live Tables, Spark, Unity Catalog - Strong proficiency in Python, SQL, Spark, and distributed systems - Expertise in data modeling, ELT patterns, CDC, and streaming architectures - Experience supporting AI/ML pipelines, feature stores, and analytics consumption - Strong understanding of Dimensional Modeling, ELT and modern data lakehouse patterns. Leadership & Collaboration - Proven ability to influence without authority across engineering, product, and architecture teams. - Strong communication skills with both technical and executive audiences. - Track record of mentoring senior engineers and leading complex initiatives. **Preferred Qualifications:** - Experience modernizing legacy warehouses and ETL platforms. - Familiarity with Data Mesh execution and domain-aligned data products. - Experience implementing FinOps practices for analytics platforms. - Exposure to AI/ML enablement, feature engineering, or agent-driven analytics. - Google Cloud certifications (Data Engineer, Architect) preferred **Company Overview:** UKG is the Workforce Operating Platform that puts workforce understanding to work. With the world's largest collection of workforce insights, and people-first AI, our ability to reveal unseen ways to build trust, amplify productivity, and empower talent, is unmatched. It's this expertise that equips our customers with the intelligence to solve any challenge in any industry - because great organizations know their workforce is their competitive edge. Learn more at ukg.com. Equal Opportunity Employer UKG is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, disability, religion, sex, age, national origin, veteran status, genetic information, and other legally protected categories. View The EEO Know Your Rights poster (************************************************************************************************** UKG participates in E-Verify. View the E-Verify posters here (******************************************************************************************** . It is unlawful in Massachusetts to require or administer a lie detector test as a condition of employment or continued employment. An employer who violates this law shall be subject to criminal penalties and civil liability. Disability Accommodation in the Application and Interview Process For individuals with disabilities that need additional assistance at any point in the application and interview process, please email ****************** . The pay range for this position is $184,300.00 to $230,000 however, base pay offered may vary depending on skills, experience, job-related knowledge and location. This position is also eligible for a short-term incentive and a long-term incentive as part of total compensation. Information about UKG's comprehensive benefits can be reviewed on our careers site at ********************************************* It is the policy of Ultimate Software to promote and assure equal employment opportunity for all current and prospective Peeps without regard to race, color, religion, sex, age, disability, marital status, familial status, sexual orientation, pregnancy, genetic information, gender identity, gender expression, national origin, ancestry, citizenship status, veteran status, and any other legally protected status entitled to protection under federal, state, or local anti-discrimination laws. This policy governs all matters related to recruitment, advertising, and initial selection of employment. It shall also apply to all other aspects of employment, including, but not limited to, compensation, promotion, demotion, transfer, lay-offs, terminations, leave of absence, and training opportunities.
$184.3k-230k yearly 10d ago
Summer 2026 Electrical Engineering Intern- Topeka, KS
Peraton 3.2
Senior electrical engineer job in Topeka, KS
Responsibilities Peraton is seeking a Summer 2026 Electrical Engineering Intern in support of the USPS Central Repair Facility program in Topeka, KS. This position is onsite. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted and highly differentiated national security solutions and technologies that keep people safe and secure. Peraton serves as a valued partner to essential government agencies across the intelligence, space, cyber, defense, civilian, health, and state and local markets. Discover careers that change the world and further advancements in defense, technology, and engineering today at Peraton. Use your experience to grow your career and support our global customers with the technology, systems, and solutions they need to enable their missions on the front lines and secure our world every day. With Peraton, you'll discover a culture built on diversity, respect, and above all teamwork. Together with our group of experts across the technical spectrum, you'll discover opportunities to make a difference in our world and start solving some of the world's most critical problems in the most innovative ways. Responsibilities: Device Modeling (FPGAs, BGAs) Digital Circuit Design & research AutoCAD or Eagle software experience (Schematic Capture) Basic electrical theory Software development Board / component layout AC / DC electronics Power theory #CRF2025 Qualifications Required Qualifications: US Citizenship and the ability to obtain and maintain a U.S. Postal Service security clearance. Clearance is required to start. Be enrolled full-time and pursuing an undergraduate or graduate degree from an accredited college/university AND graduating after August 2026. Be majoring in Electrical Engineering, Computer Engineering or related field. Have an overall cumulative GPA of 3.0/4.0 or higher (unofficial academic transcripts must be provided at time of application by uploading the documents to your application or profile). Be available to work full-time (40 hours per week) for at least 10 weeks during summer 2026. Must be local to the Topeka, KS area and/or willing to commute onsite daily. Desired Qualifications: 3.7 cumulative GPA or higher. Good presentation and writing/communication skills. Self-motivated, willing to learn, and interested in working in a team environment. Experience in developing and delivering presentations and leading small groups. Experience in working in an autonomous work environment on complex projects. Experience in working on business or engineering full life-cycle projects from project inception through launch. #CRF2025 #PeratonIntern Peraton Overview Peraton is a next-generation national security company that drives missions of consequence spanning the globe and extending to the farthest reaches of the galaxy. As the world's leading mission capability integrator and transformative enterprise IT provider, we deliver trusted, highly differentiated solutions and technologies to protect our nation and allies. Peraton operates at the critical nexus between traditional and nontraditional threats across all domains: land, sea, space, air, and cyberspace. The company serves as a valued partner to essential government agencies and supports every branch of the U.S. armed forces. Each day, our employees do the can't be done by solving the most daunting challenges facing our customers. Visit peraton.com to learn how we're keeping people around the world safe and secure. Target Salary Range The rate / range per hour below represents the typical salary range for this position. Salary is determined by various factors, including but not limited to, the scope and responsibilities of the position, the individual's experience, education, knowledge, skills, and competencies, as well as geographic location and business and contract considerations. Depending on the position, employees may be eligible for overtime, shift differential, and a discretionary bonus in addition to base pay. SCA / Union / Intern Rate or Range $24.50/hour EEO EEO: Equal opportunity employer, including disability and protected veterans, or other characteristics protected by law.
$24.5 hourly Auto-Apply 60d+ ago
Senior Engineer, Workday Innovation Lead
Cardinal Health 4.4
Senior electrical engineer job in Topeka, KS
**_What Application Development & Maintenance contributes to Cardinal Health_** Information Technology oversees the effective development, delivery, and operation of computing and information services. This function anticipates, plans, and delivers Information Technology solutions and strategies that enable operations and drive business value. Application Development & Maintenance performs configuration or coding to develop, enhance and sustain the organization's software systems in a cross-functional team environment through adherence to established design control processes and good engineering practices. This job family programs and configures end user applications, systems, databases and websites to achieve the organization's internal needs and externally-facing business needs. Application Development & Maintenance partners with business leaders, investigates user needs and conducts regular assessments, maintenance and enhancements of existing applications. We are seeking a visionary and execution-focused AI Innovation Lead / Product Owner to drive the strategic development and adoption of AI-powered capabilities across the Workday ecosystem. This role blends product ownership, innovation leadership, and stakeholder engagement to deliver intelligent, responsible, and high-impact solutions that transform enterprise workflows. The ideal candidate will bring a player/coach mindset with developer experience to do peer reviews on build work while focused on development of technical acumen amongst peers and partners. **_Responsibilities_** + Define AI Strategy: Shape and communicate a clear roadmap for AI-driven enhancements within Workday, including Illuminate, Extend, and Orchestrate. + Lead Product Development: Own the lifecycle of AI features and extensions-from ideation and prioritization to delivery and iteration. + Drive Innovation: Champion experimentation with generative AI, agentic workflows, and automation use cases across HR, Finance, and Operations. + Stakeholder Engagement: Collaborate with business leaders, developers, and end users to gather feedback, validate solutions, and ensure alignment with enterprise goals. + Governance & Ethics: Establish and promote responsible AI practices, including transparency, bias mitigation, and data privacy compliance. + Enablement & Adoption: Develop training, documentation, and change management strategies to accelerate AI literacy and usage across teams. + Measure Impact: Define KPIs and success metrics for AI initiatives, and report on adoption, ROI, and business outcomes. **_Qualifications_** + Workday Ecosystem Knowledge: Familiarity with Workday Illuminate, Extend, Orchestrate, and integration capabilities preferred. + AI & Automation Expertise: Understanding of generative AI, LLMs, intelligent agents, and automation frameworks preferred. + Product Ownership: Experience managing product roadmaps, backlogs, and agile delivery cycles preferred. + Strategic Thinking: Ability to translate enterprise goals into actionable AI initiatives preferred. + Cross-Functional Collaboration: Proven success working with HR, Finance, IT, and engineering teams preferred. + Communication Skills: Strong ability to influence, present, and engage both technical and non-technical audiences preferred. + Governance Awareness: Knowledge of responsible AI principles, data ethics, and compliance frameworks preferred. + Experience with Workday AI features and developer tools preferred. + Background in enterprise software product management or innovation leadership preferred. + Familiarity with Agile, DevOps, and Design Thinking methodologies preferred. + Exposure to enterprise data platforms, ML pipelines, or cloud-native architectures preferred. + Workday Extend for custom app dev & API Integration preferred. + WD Studio, EIBs, Core Connectors preferred. + REST and SOAP APIs preferred. + XML, JSON, SXLT preferred. + _Design/Build custom AI Agents using WD Build_ preferred. + _Create AI-powered apps with Workday Extend_ preferred. + _Leverage expanded AI Gateway APIs to imbed WD AI services_ preferred. **_What is expected of you and others at this level_** + Applies advanced knowledge and understanding of concepts, principles, and technical capabilities to manage a wide variety of projects + Participates in the development of policies and procedures to achieve specific goals + Recommends new practices, processes, metrics, or models + Works on or may lead complex projects of large scope + Projects may have significant and long-term impact + Provides solutions which may set precedent + Independently determines method for completion of new projects + Receives guidance on overall project objectives + Acts as a mentor to less experienced colleagues **Anticipated salary range:** $123,400 - $176,300 **Bonus eligible:** Yes **Benefits:** Cardinal Health offers a wide variety of benefits and programs to support health and well-being. + Medical, dental and vision coverage + Paid time off plan + Health savings account (HSA) + 401k savings plan + Access to wages before pay day with my FlexPay + Flexible spending accounts (FSAs) + Short- and long-term disability coverage + Work-Life resources + Paid parental leave + Healthy lifestyle programs **Application window anticipated to close:** 12/24/2025 *if interested in opportunity, please submit application as soon as possible. The salary range listed is an estimate. Pay at Cardinal Health is determined by multiple factors including, but not limited to, a candidate's geographical location, relevant education, experience and skills and an evaluation of internal pay equity. _Candidates who are back-to-work, people with disabilities, without a college degree, and Veterans are encouraged to apply._ _Cardinal Health supports an inclusive workplace that values diversity of thought, experience and background. We celebrate the power of our differences to create better solutions for our customers by ensuring employees can be their authentic selves each day. Cardinal Health is an Equal_ _Opportunity/Affirmative_ _Action employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, ancestry, age, physical or mental disability, sex, sexual orientation, gender identity/expression, pregnancy, veteran status, marital status, creed, status with regard to public assistance, genetic status or any other status protected by federal, state or local law._ _To read and review this privacy notice click_ here (***************************************************************************************************************************
$123.4k-176.3k yearly 60d+ ago
Intern/Co-op - Midstream Logistics and Storage Mechanical/Civil/Electrical Engineering (Summer 2026)
Marathon Petroleum Corporation 4.1
Senior electrical engineer job in Easton, KS
An exciting career awaits you At MPC, we're committed to being a great place to work - one that welcomes new ideas, encourages diverse perspectives, develops our people, and fosters a collaborative team environment. Marathon Petroleum Corp. (MPC) offers internship and co-op opportunities to high-performing college students who want meaningful hands-on experiences in their fields of study. The following core values guide MPC's approach to doing business: safety and environmental stewardship; integrity; inclusion; collaboration; and excellence. Interns/co-ops work side-by-side with experienced professionals as contributing members of diverse work teams who create value for the company's shareholders. MPC believes that how we conduct our business is just as important as the bottom line. About the Logistics & Storage (L&S) Organization: The Logistics & Storage organization is the link between the Refining and Marketing components of Marathon. L&S transports crude oil and refined products to and from the refineries and onto storage terminals for distribution to retail marketing facilities, via pipelines and marine transportation operations. Logistics & Storage is comprised of four primary components: Logistics & Storage Engineering (L&SE) - L&SE provides engineering design and project management services to Terminals, MPL, and Marine. Terminals - Terminals play a prominent role in enhancing life's possibilities by blending, distributing, and delivering quality products in a safe, reliable, and competitive manner. Marathon Pipe Line Company (MPL) - MPL operates pipeline systems that move crude oil from production fields, other pipeline companies, and offshore platforms to MPC refineries, other refineries, and other pipeline systems. MPL also operates pipeline systems that move refined products from refineries to product terminals. Marine - Maintains and operates a large private inland petroleum products barge fleet, which is used to ship crude oil, intermediates, and refined products. Responsibilities: The purpose of the Logistics and Storage intern/co-op program is to identify and develop future technical and leadership talent for the benefit of MPC, the engineering intern/co-op, and the engineering profession. The intern/co-op program may consist of any number of work sessions. Multiple sessions give interns/co-ops the ability to rotate between the different L&S components in order to gain exposure to the various business segments and to offer a variety of assignments with increasing responsibility. Intern/Co-ops will gain experience in the 5 phases of the Marathon Project Management Process (MPMP) including Conceptual, Feasibility, Definition, Implementation, and Start-up/Close-out. Other responsibilities may include: * Development of project scope * Engineering oversight * Technical design * Cost estimating * Schedule development * Evaluating and summarizing bid sets * Construction supervision * Safety leadership * Coordination with operations groups * Project documentation * Travel ranges from 15-45% Qualifications: * Candidates must be pursuing a Bachelor's degree in Civil, Electrical, or Mechanical Engineering. * Concurrent enrollment in a Bachelor's degree seeking program for the duration of the experience. * Strong academic performance. * Candidates must be authorized to work in the US on a full-time indefinite basis without the need for employment visa sponsorship now or in the future. * Availability to work 40 hours per week. * Positions are available Spring, Summer, and Fall semesters. * Availability for multiple work terms is preferred. * Many projects will require travel to construction sites; therefore, a valid driver's license is required. * Military experience a plus. * MIN - $32.92 per hour / MAX - $41.67 As an energy industry leader, our career opportunities fuel personal and professional growth. Location: Findlay, Ohio Job Requisition ID: 00018403 Pay Min/Max: $0.00 - $999.99 Hourly Grade: HRLY1 Location Address: 539 S Main St Additional locations: Catlettsburg, Kentucky, East Sparta, Ohio, La Palma, California, Owensboro, Kentucky, Pasadena, Texas, Salt Lake City, Utah, Tampa, Florida, Vernon, Illinois, Wood River, Illinois Education: Employee Group: Full time Employee Subgroup: Intern Marathon Petroleum Company LP is an Equal Opportunity Employer and gives consideration for employment to qualified applicants without discrimination on the basis of race, color, religion, creed, sex, gender (including pregnancy, childbirth, breastfeeding or related medical conditions), sexual orientation, gender identity, gender expression, reproductive health decision-making, age, mental or physical disability, medical condition or AIDS/HIV status, ancestry, national origin, genetic information, military, veteran status, marital status, citizenship or any other status protected by applicable federal, state, or local laws. If you would like more information about your EEO rights as an applicant, click here. If you need a reasonable accommodation for any part of the application process at Marathon Petroleum LP, please contact our Human Resources Department at ***************************************. Please specify the reasonable accommodation you are requesting, along with the job posting number in which you may be interested. A Human Resources representative will review your request and contact you to discuss a reasonable accommodation. Marathon Petroleum offers a total rewards program which includes, but is not limited to, access to health, vision, and dental insurance, paid time off, 401k matching program, paid parental leave, and educational reimbursement. Detailed benefit information is available at mympcbenefits.com. The hired candidate will also be eligible for a discretionary company-sponsored annual bonus program. Equal Opportunity Employer: Veteran / Disability We will consider all qualified Applicants for employment, including those with arrest or conviction records, in a manner consistent with the requirements of applicable state and local laws. In reviewing criminal history in connection with a conditional offer of employment, Marathon will consider the key responsibilities of the role.
$32.9-41.7 hourly Auto-Apply 60d+ ago
Power Electronics Engineer
Actalent
Senior electrical engineer job in Olathe, KS
Job Title: Power Electronics EngineerJob Description Join our dynamic team dedicated to pushing the boundaries of power electronics. As a Power Electronics Engineer, you will collaborate with a multidisciplinary team of scientists, engineers, and technicians to design and develop cutting-edge analog and digitally controlled power converters. You will play a pivotal role in turning theoretical concepts into tangible, innovative products. Responsibilities * Collaborate with a multidisciplinary team to advance the design of analog and digitally controlled power converters. * Develop new power conversion products from concept to reality. * Provide technical leadership in the development of power products. * Design, troubleshoot, and validate 115VAC, 400 Hz to 28-800VDC, 1kW-20kW, 1 and 3-phase active power converters and motor control products for aerospace applications. * Design and troubleshoot DC-DC power converters ranging from 0.8V to 800V and 100W to 20kW. * Develop schematics and supervise PCB layouts. * Participate in system integration, creating specifications and developing test scenarios. * Perform other duties as assigned. Essential Skills * Expertise in power electronics, hardware, and power systems. * Strong foundation in electrical engineering with a focus on DC-DC and ZCS converter design. * Experience with military standards. * Proficiency in PCB design software, such as Orcad, and familiarity with Pls Cadd. * Bachelor's degree in Electrical Engineering with at least three years of related experience or a relevant degree with five years of related work experience. Additional Skills & Qualifications * Experience with DFX and aerospace industry standards, such as DO160. * Visionary mindset with a long-term focus on team and organizational success. * Proven interpersonal and leadership skills, with the ability to motivate and influence others. * Highly organized with exceptional attention to detail; able to manage multiple priorities. * Strong written and verbal communication skills, effectively engaging with stakeholders. Work Environment This role is based in an office and manufacturing environment with a fast-paced, deadline-driven culture. The engineering team consists of 32 members, with expansion plans due to new contract wins. The dress code is business casual, including polo or button-down shirts with jeans or slacks. The work schedule is Monday to Friday, with normal day shift hours from 8 AM to 5 PM. Job Type & Location This is a Permanent position based out of Olathe, KS. Pay and Benefits The pay range for this position is $125000.00 - $185000.00/yr. Normal benefits. Health, Vision, Dental, 401(K) Workplace Type This is a fully onsite position in Olathe,KS. Application Deadline This position is anticipated to close on Jan 23, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
$57k-80k yearly est. 11d ago
Instrumentation and Controls QCx Engineer
Lotusworks
Senior electrical engineer job in De Soto, KS
LotusWorks is an Engineering Services provider specializing in managing Commissioning, Construction Services, Calibration, Operations & Maintenance scopes of work within global manufacturing facilities. LotusWorks operates globally across EMEA and North America partnering with the world's leading manufacturers across the Semiconductor, Pharmaceutical & Biologics, Medical Device and Data Centre sectors. Our team of Engineering and Technical professionals is immersed in cutting-edge technologies and innovations. LotusWorks is committed to a diverse and inclusive workplace, integral to our people-first approach. We are seeking an experienced Instrumentation & Controls (I&C) QCx Engineer to join our growing team. This role is responsible for supporting all Quality Commissioning (QCx) activities through Levels 1-3 of the project lifecycle, ensuring systems meet design intent, regulatory standards, and client expectations. The ideal candidate will have strong technical acumen in control systems, commissioning procedures, and documentation management within complex, mission-critical environments. Responsibilities: Participate in and support the QCx process through Levels 1-3 of commissioning Review design documents, equipment specifications, and commissioning plans to ensure alignment with project requirements. Assist with vendor coordination and management, ensuring technical and schedule alignment. Support and perform design specification reviews, manufacturer submittals, one-line drawing analysis, and overall project documentation control. Confirm equipment and systems are installed per project design, local codes, and national standards. Review test documentation for installed equipment to verify functional readiness and performance. Track and report commissioning progress across equipment and systems, maintaining up-to-date documentation. Support commissioning procedures on Instrumentation and Controls systems. Verify system performance against design criteria and operational requirements. Support vendors and trade partners during Functional Performance Testing (FPT) of systems and components. Record test results, deviations, and troubleshooting steps, and ensure all commissioning records are accurate and complete. Identify system deficiencies or installation errors, perform root cause analysis, and recommend corrective actions. Record and manage non-conformance and punch list items, collaborating with stakeholders for timely resolution. Ensure all equipment and systems meet quality, safety, and compliance requirements per OSHA, ASHRAE, NFPA, and project EHS plans. Verify that systems are not energized or operated prior to completion of required safety testing and documentation. Work collaboratively with multidisciplinary teams including design engineers, project managers, contractors, and vendors to ensure smooth project execution. Maintain a general understanding of LEED requirements and their application to commissioning and system performance. Skills Required: Minimum 2+ years of experience in commissioning, quality control, or controls engineering Strong understanding of commissioning workflows, documentation, and control system functionality Experience with industrial automation, instrumentation, and communication protocols Excellent organizational, troubleshooting, and communication skills Ability to manage multiple priorities and coordinate across multidisciplinary team Education / Licenses / Certifications: Bachelor's degree in Electrical, Mechanical, or Control Systems Engineering (preferred) Proof of education, licenses, and certifications will be required where applicable. Benefits: Medical and Dental Insurance Life, Short-Term, Long-Term Disability Insurance Training and Education Assistance 401k Retirement Plan Extra Annual Leave with Years of Service Maternity/Paternity Leave Recognition Rewards #LI-DNP LotusWorks is an equal opportunity employer and prohibits discrimination and harassment of any kind. We are committed to creating a diverse and inclusive workplace where all employees feel valued, respected, and empowered.
$67k-89k yearly est. Auto-Apply 32d ago
Electrical Engineer III
Aerovironment 4.6
Senior electrical engineer job in Lawrence, KS
The Electrical Engineer III designs, develops, modifies and evaluates electronic parts, components or integrated circuitry for electronic equipment, or other hardware systems and/or electrical engineering applications. In this role, one selects components and equipment based on analysis of specifications and reliability as well as determines design approaches & parameters. Conducts general engineering and design of electronic systems on small unmanned aircraft vehicles with cross-functional teams. Position Responsibilities Performs simulation and detailed design for digital and analog circuits Drives system integration, assembly procedures, and test procedures Documents designs with engineering drawings and written descriptions Trouble-shoots complex systems from a hardware and software perspective Designs, builds, and tests prototypes expediently and efficiently Works with avionics, embedded systems, and RF links. Writes software to support the integration of sensors and embedded processors Designs and implements circuit boards. This includes architecture, component selection, schematic capture, board layout, board bring-up, and documentation Performs electronic engineering support activities on R&D projects. Performs design & analysis tasks and writes fabrication & test procedures Works on problems of diverse scope where analysis of data requires evaluation of identifiable factors Follows standard practices and procedures when analyzing situations or data from which answers can be readily obtained Other duties as assigned Basic Qualifications (Required Skills & Experience) B.S. Degree in Electrical Engineering is required or equivalent combination of education, training, and experience Minimum of 5 - 8 years of relevant experience Proficient with office software, computer-based productivity tools and other software tools in one's area of expertise Experienced using Altium Designer for schematic capture and PCB layout Experienced in one or more areas: Radio Frequency (RF), embedded control, FPGA Experienced with power electronics, including motors and Battery Technology (lead acid, Nickel metal hydride & Lithium ion) Demonstrated competency in troubleshooting complex systems Demonstrated familiarity of common industry protocols (LVDS, I2C, HDMI, UART, SPI, CAN, USB) Knowledge of general Engineering fundamentals, mathematics, physics & material properties Some travel may be required in support of flight test operations (up to 30%) Must have a clean driving record Other Qualifications & Desired Competencies Advanced degree is preferred Flight test or R/C (Remote Control) experience a plus, hands-on experience with tools a plus Demonstrates familiarity with Small UAV subsystems and associated software Demonstrates consistency in complying with company's policies and procedures Resolves a wide range of issues in creative ways Demonstrates sound judgement in selection of methods and techniques for obtaining solutions Shares ideas and experiences with others, solicits feedback and asks relevant questions Able to excel in a fast-paced, deadline-driven environment, where small teams share a broad variety of duties Displays strong initiative and drive to accomplish goals and meet company objectives Takes ownership and responsibility for current and past work products Is committed to learning from mistakes and driven to improve and enhance performance of oneself, others, and the company Has effective problem-solving, analytical, interpersonal and communication skills. Team Player - Focuses on teamwork, collaboration and puts the success of the team above one's own interests Physical Demands Ability to work in an office and manufacturing environment (Constant) Required to sit and stand for long periods; talk, hear, and use hands and fingers to operate a computer and telephone keyboard (Frequent) The salary range for this role is: $93,371 - $132,300 AeroVironment considers several factors when extending an offer, including but not limited to, the location, the role and associated responsibilities, a candidate's work experience, education/training, and key skills. ITAR Requirement: T his position requires access to information that is subject to compliance with the International Traffic Arms Regulations (“ITAR”) and/or the Export Administration Regulations (“EAR”). In order to comply with the requirements of the ITAR and/or the EAR, applicants must qualify as a U.S. person under the ITAR and the EAR, or a person to be approved for an export license by the governing agency whose technology comes under its jurisdiction. Please understand that any job offer that requires approval of an export license will be conditional on AeroVironment's determination that it will be able to obtain an export license in a time frame consistent with AeroVironment's business requirements. A “U.S. person” according to the ITAR definition is a U.S. citizen, U.S. lawful permanent resident (green card holder), or protected individual such as a refugee or asylee. See 22 CFR § 120.15. Some positions will require current U.S. Citizenship due to contract requirements. Benefits: AV offers an excellent benefits package including medical, dental vision, 401K with company matching, a 9/80 work schedule and a paid holiday shutdown. For more information about our company benefit offerings please visit: ********************************** We also encourage you to review our company website at ******************** to learn more about us. Principals only need apply. NO agencies please. Who We Are Based in California, AeroVironment (AVAV) is a global leader in unmanned aircraft systems (UAS) and tactical missile systems. Founded in 1971 by celebrated physicist and engineer, Dr. Paul MacCready, we've been at the leading edge of technical innovation for more than 45 years. Be a part of the team that developed the world's most widely used military drones and created the first submarine-launched reconnaissance drone, and has seven innovative vehicles that are part of the Smithsonian Institution's permanent collection in Washington, DC. Join us today in developing the next generation of small UAS and tactical missile systems that will deliver more actionable intelligence to our customers so they can proceed with certainty - and succeed. What We Do Building on a history of technological innovation, AeroVironment designs, develops, produces, and supports an advanced portfolio of unmanned aircraft systems (UAS) and tactical missile systems. Agencies of the U.S. Department of Defense and allied military services use the company's hand-launched UAS to provide situational awareness to tactical operating units through real-time, airborne reconnaissance, surveillance, and target acquisition. We are proud to be an EEO/AA Equal Opportunity Employer, including disability/veterans. AeroVironment, Inc. is an Equal Employment Opportunity (EEO) employer and welcomes all qualified applicants. Qualified applicants will receive fair and impartial consideration without regard to race, sex, color, religion, national origin, age, disability, protected veteran status, genetic data, sexual orientation, gender identity or other legally protected status. ITAR U.S. Citizenship required
$93.4k-132.3k yearly Auto-Apply 60d+ ago
Principal Controls Engineer
The J. M. Smucker Company 4.8
Senior electrical engineer job in Topeka, KS
Your Opportunity as Principal Controls Engineer - TSO The Principal Controls Engineer will lead and support complex automation, controls, and technology initiatives across multiple manufacturing sites. Responsibilities include managing projects from concept through execution, establishing and maintaining engineering standards, engaging with vendors to drive innovation, and providing corporate technical support. This role requires close collaboration with plant leadership, engineering teams, and operations to ensure successful implementation and alignment with business objectives. Location: You can pick to work at any of these locations: Orrville, OH, Arkadelphia, AR, Buffalo, NY, Columbus, GA, Decatur, AL, Emporia, KS, Lexington, KY, Longmont, CO, McCalla, AL, Memphis, TN, New Orleans, LA, Scottsville, KY, or Topeka, KS Work Arrangements: Approximately 30% Travel to other sites 100% on-site at the plants. AM Shift (Mon-Fri 8am-5pm) - Flexibility required. Willingness to flow to the work as needed In this Role You Will: Projects: Support, lead, or manage larger automation, controls, and technology projects at manufacturing sites, including possible installation oversight. Collaborate with engineering and operations leaders from feasibility through startup and CQV (commissioning/qualification/verification). Standards and Best Practices: Apply, maintain, and develop engineering standards to ensure consistency and compliance with NFPA 70, NFPA 70E, NFPA 79, NEC, OSHA 1910. Communicate standards, guidance, and recommendations to engineering and controls personnel at the sites. Vendor Engagement: Work closely with vendors to establish accurate quotations and resolving issues when needed. Leverage our internal resources to ensure terms and conditions are acceptable. Proactively engage with outside companies to explore new technologies. Corporate Support: Provide C&IS support to operations, ensuring alignment with business objectives. Support MES and IS Operations when priorities align. Automation Landscape: Understand current automation and technology state and drive targeted improvements, reapplications, and emerging technologies as part of the greater Operations Technology Team. Expert in Key Technologies: Serve as the subject matter expert for key technologies, providing guidance and support to the engineering and operations teams. The Right Role for You We are bold, kind, strive to do the right thing, we play to win, and we believe in a strong community that thrives together. Our culture is rooted in our Basic Beliefs, and we believe in supporting every employee by meeting their physical, emotional, and financial needs. What We are Looking For: Minimum Requirements: Bachelor's degree in engineering or 20+ years of equivalent plant experience 8+ years in controls/automation 5+ years in manufacturing 2+ years of managing others Strong knowledge of control hardware/software (Allen Bradley PLC and Rockwell FactoryTalk platforms) Familiarity with NFPA and OSHA guidelines as they apply to electrical, controls, and automation Additional skills and experience that we think would make someone successful in this role: Knowledge with plant systems software (Proficy, Project Management, eAM, etc.) Mechanical/electrical experience in food manufacturing Ability to collaborate across departments and sites Remote management capability Strong judgement and adaptability Work Environment: This job operates in a manufacturing environment. The noise level in the work environment and manufacturing sites can be high. Physical Demands: Regularly required to talk and hear. Frequently required to stand; walk; use hands and fingers to handle or feel; and reach with hands and arms. Occasionally required to sit; climb or balance; and stoop, kneel, crouch or crawl. Able to lift objects up to 50 pounds frequently. May push and pull heavy objects. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus. Learn More About Working at Smucker Helping our Employees Thrive Delivering on Our Purpose Our Continued Commitment to Ensuring a Workplace for All Follow us on LinkedIn #LI-TJ1 #INDSA
$82k-100k yearly est. Auto-Apply 12d ago
Electrical Engineer Expert - Data Centers
Olsson 4.7
Senior electrical engineer job in Topeka, KS
Arizona - Remote; Arkansas - Remote; Baton Rouge, LA; Colorado - Remote; Colorado Springs, CO; Dallas, TX; Denver, CO; Des Moines, IA; Fayetteville, AR; Florida - Remote; Fort Worth, TX; Georgia - Remote; Idaho - Remote; Indiana - Remote; Iowa - Remote; Joplin, MO; Kansas - Remote; Kansas City, MO; Kentucky - Remote; Lincoln, NE; Little Rock, AR; Louisiana - Remote; Loveland, CO; Michigan - Remote; Mississippi - Remote; Missouri - Remote; Montana - Remote; Nebraska - Remote; Nevada - Remote; New Hampshire - Remote; New Mexico - Remote; North Carolina - Remote; North Dakota - Remote; North Kansas City, MO; Ohio - Remote; Oklahoma - Remote; Oklahoma City, OK; Omaha, NE; Overland Park, KS; Phoenix, AZ; South Dakota - Remote; Tennessee - Remote; Texas - Remote; Tulsa, OK; Utah - Remote; Virginia - Remote; West Virginia - Remote; Wisconsin - Remote; Wyoming - Remote **Company Description** We are Olsson. We engineer and design solutions that improve the world around us. As a company, we promise to always be responsive, transparent, and focused on results - for our people, our clients, and our company. We're a people-centric firm, so it's no surprise our greatest asset is our people. The impact this creates is an environment that encourages our people to grow and be creative with their talents. This approach builds a culture that is uniquely Olsson. It allows us to grow our people as we grow our business. This, in turn, creates a lasting impact on the world around us. **Job Description** We are seeking an Electrical Engineer Expert to join our Data Center team and serve as the subject matter expert on hyperscale, mission-critical campus and facility electrical systems. This role is ideal for someone who thrives in a fast-paced, ever-evolving environment and is passionate about supporting project teams with deep technical expertise. You will be the go-to resource for electrical design strategy, QA/QC oversight, and technical mentorship across high-impact data center projects. Your work will directly influence the reliability, scalability, and innovation of our electrical systems supporting hyperscale clients. **Key Responsibilities** + Serve as the technical lead for electrical systems in hyperscale and/or colocation data center projects, including power distribution, switchgear, UPS systems, and emergency power. + Provide expert-level guidance on design standards, code compliance (NEC, NFPA, IEEE), and commissioning protocols. + Collaborate with project managers, engineers, and external partners to ensure technical excellence and alignment with client goals. + Mentor and support engineering teams, offering technical reviews, troubleshooting, and strategic input. + Lead QA/QC processes and ensure all deliverables meet the highest standards of quality and reliability. + Stay current with emerging technologies and trends in mission-critical infrastructure and integrate them into project strategies. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills. + Ability to contribute and work well with a team. + Excellent interpersonal and problem-solving skills. + Bachelor's degree in Electrical Engineering and PE License + 12+ years of experience in electrical engineering with a focus on hyperscale data centers or mission-critical facilities. + Proven ability to lead technical design efforts and support multidisciplinary teams. + Strong understanding of medium and low voltage systems, redundancy strategies, and commissioning practices. + Excellent communication and collaboration skills. + Passion for mentoring and developing engineering talent. \#LI-DD1 Actual compensation will vary based on factors such as experience, qualifications, geographic location, skills, education, and internal equity. Colorado Pay Range $150,000-$236,000USD **Additional Information** Olsson specializes in engineering and design, client advisory services, planning, field services, and environmental. Improving the world has been our mindset from the very beginning, back when Olsson first opened for business in 1956. And it will be our mindset for years to come. As an Olsson employee, you will: + Receive a competitive 401(k) match + Be empowered to build your career with tailored development paths + Have the possibility for flexible work arrangements + Engage in work that has a positive impact on communities + Participate in a wellness program promoting balanced lifestyles In addition, full-time employees will receive our traditional benefits package (health care, vision, dental, paid time off, etc.) and the opportunity to participate in a bonus system that rewards performance. Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.
$61k-78k yearly est. 47d ago
Sr. Power Electronics Engineer (Digital Controls Engineer)
TT Electronics Plc
Senior electrical engineer job in Olathe, KS
COME JOIN OUR JOURNEY! When you join TT, you join our global community of visionaries, creators, and achievers dedicated to solving technology challenges for a sustainable world. Simply put, we are a global manufacturer with a passion for engineering advanced electronics that benefit our planet and people for future generations. We are committed to having a positive impact on the world through a culture built around safety, transparency, collaboration, and positive relationships. Our teams are fueled by performance and expertise, leading the charge in innovation, efficiency and delivering world-class customer service. Be part of the journey. Role Overview and Responsibilities This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. Introduction This position will help the team develop flight-worthy safety critical electronic hardware, power supplies, embedded software, and magnetics for our Aerospace and Defense customers. We are a team of co-located electrical, mechanical, software, test, and project management engineers under one manager. These disciplines develop requirements, produce detailed designs, qualify, document, develop test equipment for, and help establish production processes. Key Responsibilities * Work with a multidisciplinary team of scientists, engineers, and technicians pushing state-of-the-art design for analog and digitally controlled power converters. * Develop new power conversion products based on technology and turn theory into reality. * Provide technical leadership in power product development. * Design, troubleshoot, validate 115VAC, 400 Hz to 28-800VDC, 1kW-20kW, 1 and 3-phase active power converters and motor control products for aerospace applications. * Design and troubleshoot DC-DC power converters from 0.8V to 800V and 100W to 20kW range. * Develop schematics and supervise PCB layouts. * System integration in a team environment, to create specifications and develop test scenarios. * Other duties, as assigned. Core Requirements * Excellent practical knowledge on converter topology and digital control algorithm development. * Practical knowledge on PFC and full bridge phase shift ZCS and ZVS converter developments. * Working experience with PCB bring-up and lab testing. * Strong understanding of analog circuit design and theory. * Demonstrated commitment to excellence in all aspects of work. * Strong sense of ownership and accountability for assigned responsibilities. * Effective active listening and communication skills. * Sound judgment and confident decision-making abilities. * Ability to work independently with minimal supervision. * Willingness to contribute with a hands-on, collaborative approach in a team-oriented environment. * Proficiency in Microsoft Office Suite, MS Project or Smartsheet, and Epicor ERP. * Must be available to work on-site, in either Olathe, KS or Plano, TX. Qualifications, Skills and Attributes Desirable Skills and Experience * Bachelor of Science in Electrical Engineering with a minimum of three years related experience, or a relevant degree and five years of related work experience. * Experience with DFX, aerospace, and MIL standard knowledge (e.g., DO160, MIL-STD-461, MIL-STD-704, etc.). * Proficiency with OrCAD Designer or other PCB design software and experience designing and/or building prototype boards. * Visionary mindset with a focus on the long-term success of the team and organization. * Proven interpersonal and leadership skills with the ability to motivate and influence others.Highly organized with exceptional attention to detail; able to manage multiple priorities and drive tasks to completion. * Strong written and verbal communication skills, with the ability to effectively engage with internal and external stakeholders and represent the organization professionally. * This position requires use of information which is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e., 'Green Card Holder'), Political Asylee, or Refugee. TTT Electronics does not accept any unsolicited resumes from third parties. Any resumes submitted by a third party for this or any other position will not be subject to any recruitment fees if hired. Solving Technology Challenges for a Sustainable World We want the very best people in our TT family across the globe - so we welcome applications from everyone, to celebrate a diverse mix of experiences, backgrounds and identities. We are committed to equality of opportunity for all and you can rest assured that TT Electronics takes positive steps to ensure we are an inclusive business, that will welcome and support you, from your initial application to wherever your career takes you! Please get in touch if you'd like to discuss any reasonable adjustments to your application, in order that we can accommodate and support you in the process. If you want to work for a company where who you are is valued and respected, we'd love to hear from you. #WeAreTT #BeMeAtTT
$74k-99k yearly est. Auto-Apply 60d+ ago
Power Electronics Engineer
Actalent
Senior electrical engineer job in Olathe, KS
Job Title: Power Electronics EngineerJob Description Join a dynamic and innovative team as a Power Electronics Engineer, where you will work with a multidisciplinary team of scientists, engineers, and technicians to push the boundaries of design for analog and digitally controlled power converters. You will be instrumental in developing new power conversion products, turning theoretical concepts into reality, and leading technical advancements in power product development. Responsibilities * Work with a multidisciplinary team of scientists, engineers, and technicians to advance analog and digitally controlled power converters. * Develop new power conversion products by turning theoretical concepts into practical solutions. * Provide technical leadership in power product development. * Design, troubleshoot, and validate 115VAC, 400 Hz to 28-800VDC, 1kW-20kW, 1 and 3-phase active power converters and motor control products for aerospace applications. * Design and troubleshoot DC-DC power converters ranging from 0.8V to 800V and 100W to 20kW. * Develop schematics and oversee PCB layouts. * Engage in system integration within a team environment to create specifications and develop test scenarios. * Perform other duties as assigned. Essential Skills * Experience with power electronics, hardware, and power systems. * Proficiency in electrical engineering, particularly with DC-DC and ZCS converters. * Experience with DO-178 and Military standards. * Aerospace and defense experience. * 3-5 years of relevant experience. * Familiarity with Orcad, PCB Design, and Pls Cadd. Additional Skills & Qualifications * Bachelor of Science in Electrical Engineering with a minimum of three years related experience, or a relevant degree and five years of related work experience. * Experience with DFX, aerospace, and standard knowledge (e.g., DO160, STD-461, STD-704, etc.). * Proficiency with PCB design software and experience in designing/building prototype boards. * Visionary mindset with a focus on long-term team and organizational success. * Strong interpersonal and leadership skills with the ability to motivate and influence others. * Exceptional organizational skills with attention to detail. * Strong written and verbal communication skills to effectively engage with stakeholders and represent the organization professionally. Work Environment This role is based in an office and manufacturing environment, characterized by a fast-paced, deadline-driven culture that can be stressful at times. The engineering team consists of 32 members, and there are currently 4 openings with 7 more anticipated due to growth from new contracts. The dress code is casual, with polo or button-down shirts and jeans/slacks. Work hours are Monday through Friday, during normal day shift hours (8-5). Job Type & Location This is a Permanent position based out of Olathe, KS. Pay and Benefits The pay range for this position is $125000.00 - $185000.00/yr. Normal benefits. Health, Vision, Dental, 401(K) Workplace Type This is a fully onsite position in Olathe,KS. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.
$57k-80k yearly est. 3d ago

Learn more about senior electrical engineer jobs

How much does a senior electrical engineer earn in Topeka, KS?

The average senior electrical engineer in Topeka, KS earns between $65,000 and $113,000 annually. This compares to the national average senior electrical engineer range of $82,000 to $144,000.

Average senior electrical engineer salary in Topeka, KS

$86,000

$65,00010%

$86,000Median

$113,00090%

What are the biggest employers of Senior Electrical Engineers in Topeka, KS?

The biggest employers of Senior Electrical Engineers in Topeka, KS are:

Job type you want

Full Time

Part Time

Internship

Temporary

Zippia Careers
Architecture and Engineering Industry
Senior Electrical Engineer Jobs
Locations
Topeka, KS
Senior Electrical Engineer Topeka, KS Jobs

Senior electrical engineer jobs in Topeka, KS - 119 jobs

Electrical Engineer III

Lead Controls Engineer - TSO

Lead Controls Engineer - TSO

Electrical Engineer - Generation Development & Construction

Staff Conversational AI Designer

Electrical Engineer - Generation Development %26 Construction

Senior Electrical Engineer-Federal Engineering & Design Team

Sr. Power Electronics Engineer (Digital Controls Engineer)

Electrical Engineer III

Senior Principal Data Engineer

Summer 2026 Electrical Engineering Intern- Topeka, KS

Senior Engineer, Workday Innovation Lead

Intern/Co-op - Midstream Logistics and Storage Mechanical/Civil/Electrical Engineering (Summer 2026)

Power Electronics Engineer

Instrumentation and Controls QCx Engineer

Electrical Engineer III

Principal Controls Engineer

Electrical Engineer Expert - Data Centers

Sr. Power Electronics Engineer (Digital Controls Engineer)

Power Electronics Engineer

Learn more about senior electrical engineer jobs

How much does a senior electrical engineer earn in Topeka, KS?

What are the biggest employers of Senior Electrical Engineers in Topeka, KS?