Senior mechanical engineer jobs in Springfield, MO

Job Description HiFyve has a client in Springfield, MO that is hiring for a Mechanical Design Engineer. This position will work in a team environment to design, test, and improve the different product lines produced by the company. Salary: $75k-$100k Full Benefits Package M-F 8AM-5PM Essential Job Functions Design, analyze, and test different product lines, including refrigeration equipment and heat exchangers Identify possible mechanical engineering problems and offer solutions Perform structural and thermal performance calculations Proficient in testing the different product lines Work with a variety of test equipment Provide technical mechanical engineering support for Sales, Manufacturing, QA, Service, and Customers Assimilate, interpret, and plot data gathered from test Suggest and implement design improvements Identify possible problems and offer solutions Help introduce new projects into manufacturing, along with training and work instructions Responsible for safety meetings and keeping department updated with company safety policies Contact vendors as required Prefer additional skills and experience in electrical, welding, grinding, gas brazing. Education and Experience BS Degree in Mechanical Engineering 3+ years of experience Quality benefit programs that include: Health Insurance Life Insurance Dental Insurance Vision Insurance Accident Insurance Whole Life Insurance Critical Illness Insurance 401(k) Paid Time Off & Holidays Flexible Spending Account Short Term Disability Long Term Disability Education Assistance

Job Description Mechanical Engineer III Years of Experience: 5+ Years About RTM: RTM Engineering Consultants is an MEP, Civil and Structural engineering firm that goes beyond the conventional consulting role. We forge deep partnerships with our clients by aligning with the goals, processes and people at each organization. By integrating our expertise, we offer a comprehensive suite of national resources combined with localized relationships, delivering exceptional value to our clients. At RTM Engineering Consultants, we prioritize the well-being and growth of our team members. Our commitment to professional development is evident through hands-on mentoring, opportunities for advancement, and access to RTM University. With integrated multi-disciplinary studios, you'll collaborate with experts of all levels and various disciplines. We continuously foster a positive team culture through outings that strengthen the bonds of our teams and at RTM, giving and taking are fundamental values. We believe in giving our best, contributing to others, and embracing diversity and equality for progress. Join our dynamic and inclusive team where your well-being, growth, and contributions are valued. Our Team: At RTM, we hold a profound appreciation for our workforce. We firmly believe that YOU, our team members, are our most valuable asset and are instrumental in defining our organization. Our dedication lies in delivering experiences that foster your growth and success, whether you are just embarking on your career path or have attained seasoned expertise. Guided by our CORE values of Collaborative Communication, Overall Unity, Respect and Trust, and Excellence in Engineering, we forge a unified team that consistently pursues professional achievement in all endeavors we undertake. RTM is proud to offer a comprehensive benefits package designed to promote employee health, wellness, and financial security. Our offerings include medical, dental, and vision plans, employee assistance program, disability coverage, life insurance, 401(k) and profit sharing, flexible work schedule, paid time off and training and development courses. Benefits of Joining RTM: Responsible Time Off (RTO) & Paid Holidays Flexible Scheduling 401K with Matching Health, Dental, Vision, & Life Insurance Hands-on Mentoring & Learning Professional Advancement Opportunities Integrated Multi-disciplinary Studios. Role Overview: Applies mechanical systems design knowledge, skill and ability to create construction drawings for the project owner and provides continuous professional support throughout the entire construction process. Serves as the primary liaison responsible for coordination and communication activities between the design team and the client/customer and provides project management oversight and professional support throughout the entire construction process. Key Responsibilities: Provides complete management of project timelines and related design activity communication between the design team and the client/customer, accurately & timely In accordance with company standards, provides assistance in the preparation of accurate and complete proposals and engineering agreements Accurately and timely produces mechanical systems design elements consistent with project specifications Accurately and timely produces design elements in accordance with the project hours, scope & parameters Provides research design options consistent with project requirements Selects appropriate equipment for project type Creates construction HVAC documents for permitting that are accurate and complete. Produces accurate and complete load calculations and engineering project specifications within project parameters Accurately and consistently execute QA/QC process Provide project coordination with in house and outside sources Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes and standards consistent with company quality standards. Actively participates in post design consultation activities and represents the company in client meetings through construction completion Responsible for on-boarding and overseeing junior engineers Actively mentors junior engineers and designers Provide timely billing of projects to accounting department Follows established work rules, policies and procedures Actively engages with other members of the company to continuously strive to improve processes, create efficiencies and reduce costs Cooperatively takes on other duties, roles or responsibilities as assigned Minimum Qualifications: A 4-year degree in engineering required Minimum 5 years' experience Experience in project management Knowledge of various HVAC/plumbing/fire protection systems, equipment and concepts Knowledge of engineering drafting standards Knowledge and utilization of company & design standards Expert knowledge of building codes and standards Demonstrable understanding of construction process and interpretation of construction drawings Knowledge of AutoCad Knowledge of Revit Good communication skills Preferred Qualifications: EIT and/or PE preferred Travel Requirements: Travel is anticipated between 0-10% Estimated Starting Salary Range: $85,000.00 to $115,000.00 Equal Employment Opportunity: It is the policy of RTM Engineering Consultants to practice a program of equal employment opportunity, and advancement opportunities are made available to all employees on the basis of individual qualifications without regard to race, religion, color, national origin, disability, age or gender. At this time, only candidates authorized to work in the United States of America without the need for sponsorship will be considered. RTM does not currently accept unsolicited resumes through or from search firms or recruiters.

Senior Mechanical Design Engineer BH Job ID: BH-2993 SF Job Req ID: Design. Innovate. Shape Industrial Technology! Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Senior Mechanical Design Engineer Location: Sedalia or Springfield, MO or Quincy, IL (Hybrid) About Us Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing, infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Ingersoll Rand is seeking a Senior Design Engineer to join our Industrial Technologies and Services team in Quincy, IL, Sedalia, MO, or Springfield, MO. In this high-impact role, you will drive innovation in our Positive Displacement Blower and Blower Package product lines, leading design and development efforts that shape both new and existing products. From concept to prototype to production, you'll play a key role in creating cost-effective, performance-driven designs while collaborating cross-functionally with Manufacturing, Quality, and Customer Service. This is an opportunity to influence product reliability, guide technical decision-making, and even contribute to patent-worthy innovations that support our customers worldwide. Responsibilities: * Work with PD Blower and Blower Package product lines to improve design, performance, and/or manufacturing process. * Support Engineering efforts on critical projects which includes idea development, prototype, project execution, and plant/business system implementation. * Design and/or re-design new and existing product lines. * Produce cost effective designs, complex layouts assemblies, detail part drawings, and generate associated bills of materials. * Design and implement test programs to ensure designs are adequate for intended purpose and meet specifications and functional requirements * Evaluate existing products for re-design based on feedback from manufacturing, quality, or assembly and assess functionality to determine product effectiveness for customers. * Collect product data via reports, manufacturing, assembly, and testing. * Provide technical guidance to team members including Sourcing, Operations, Customer Service, and Marketing with respect to product-based education and decisions. * Work with team to standardize product offering through product rationalization and new product development. * Work closely with Customer Service, Field Service, and Manufacturing personnel to resolve issues regarding legacy and new products. * Project involvement in patent applications for new or existing products. Requirements: * Bachelor Degree in Mechanical Engineering * 5-10 years of experience with rotating equipment design and manufacturing * Must have good mechanical aptitude. * In lieu of having rotating equipment experience, previous exposure to the design of industrial equipment and machinery in general would be appreciated. * Rotor and impeller profile design experience is preferred. * Strong proficiency in thermodynamics and compressible flow desired. * Solid Modeling CAD skills and experience with PLM tools are. * Hands-on experience with computer-aided engineering; Proficiency with FEA and CFD software. * Experience with ERP software, preferably using SAP ECC 6.0 * Superior analytical skills required with excellent communication and organizational skills. * Basic understanding of design and manufacturing principles, with preferred experience in machining, casting, injection molding, fabrication, and gear design and analysis * Strong collaboration skills and demonstrated ability to work effectively across functions (operations, product management, sourcing, etc.) * Must excel in a fast-paced, dynamic environment-driving solutions, delivering results, and modeling accountability. Core Competencies: * Product Design & Development - Expertise in designing, re-designing, and validating rotating equipment and industrial machinery, with strong proficiency in CAD modeling, FEA/CFD analysis, and PLM tools to deliver innovative and cost-effective solutions. * Engineering Analysis & Testing - Skilled in thermodynamics, compressible flow, acoustics, and vibration analysis with hands-on experience designing and implementing test programs to ensure performance, reliability, and compliance with specifications. * Manufacturing & Process Integration - Strong knowledge of machining, casting, molding, and fabrication processes with proven ability to optimize designs for manufacturability, improve production efficiency, and support plant operations. * Cross-Functional Leadership & Collaboration - Demonstrated ability to partner with operations, sourcing, customer service, and marketing to drive product rationalization, resolve technical issues, and provide technical guidance across the organization. Preferences: * Master's Degree preferred * Experience in acoustic and vibration analysis is highly desired. * Plant or manufacturing operations experience is strongly preferred. * Ansys and/or Converge software experience is preferred. * PTC Creo, Autodesk Inventor, SolidWorks, and/or Windchill is preferred. Travel and Work Arrangements * This role is onsite in Sedalia or Springfield, MO or Quincy, IL * The position is 2 days WFH, 3 onsite * Limited travel anticipated less than 10% to the other sites What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. The pay range for this role is $90,000 - $120,000. The pay range considers a wide range of factors that include a candidate's skills; experience and training; licensure and certifications; and geographic location. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit ************* What We Offer At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand is committed to achieving workforce diversity reflective of our communities. We are an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances.

Job DescriptionPosition: Mechanical Engineer IIILocation: Springfield, MOYears of Experience: 3-5 Years Role Overview:Applies mechanical systems design knowledge, skill and ability to create construction drawings for the project owner and provides continuous professional support throughout the entire construction process. Serves as the primary liaison responsible for coordination and communication activities between the design team and the client/customer and provides project management oversight and professional support throughout the entire construction process. Key Responsibilities: Provides complete management of project timelines and related design activity communication between the design team and the client/customer, accurately & timely In accordance with company standards, provides assistance in the preparation of accurate and complete proposals and engineering agreements Accurately and timely produces mechanical systems design elements consistent with project specifications Accurately and timely produces design elements in accordance with the project hours, scope & parameters Provides research design options consistent with project requirements Selects appropriate equipment for project type Creates construction HVAC documents for permitting that are accurate and complete. Produces accurate and complete load calculations and engineering project specifications within project parameters Accurately and consistently execute QA/QC process Provide project coordination with in house and outside sources Provides timely consultation on projects to manage schedules, deadlines, site surveys, punch lists, building codes and standards consistent with company quality standards. Actively participates in post design consultation activities and represents the company in client meetings through construction completion Responsible for on-boarding and overseeing junior engineers Actively mentors junior engineers and designers Provide timely billing of projects to accounting department Follows established work rules, policies and procedures Actively engages with other members of the company to continuously strive to improve processes, create efficiencies and reduce costs Cooperatively takes on other duties, roles or responsibilities as assigned Minimum Qualifications: A 4-year degree in engineering required Minimum 3-5 years' experience

We are looking to fill a full time ENTRY LEVEL Mechanical Engineer position with a manufacturer located in the area of Franklin/Bowling Green, KY. Salary Range: $70,000 per year. No relocation assistance for entry level candidates. Must Haves: · BS Degree in Mechanical Engineering is required to apply. Will not accept Mech. Engr. Technology degree · Must be able to commute or relocate at your own expense. Essential Duties and Responsibilities: · Evaluate and manage capital and kaizen projects in a time-critical environment. · Provide analysis, evaluation and review of problems regarding automation, advanced methods and equipment, material handling, layout and material flow. · Provide alternative solutions to anticipated or actual technical and/or business related manufacturing problems. · Develop safeguards and improve team member safety through process improvements. · Provide training to production and maintenance team members. · Provide trouble shooting assistance to production and maintenance team members. · Develop new equipment specifications, tooling and other associated requirements. · Design new equipment or redesign existing equipment, and coordinate its fabrication, assembly, installation, and startup as needed. · Provide daily leadership to hourly maintenance personnel · Maintain all mechanical functions of plant processes · Actively and aggressively support 6S policies and procedures · Support the Production Dept. to assure processes, fixtures, inspection gauges, and tooling are designed, manufactured and delivered on time and within budget to meet production demands. · Prepare equipment and/or tooling designs as required to meet production needs. · Collect data from production documents daily or as needed. · Compare collected data to the standards and analyze for improvements. · Compare the collected data to production reports and analyze discrepancies. · Organize and report data weekly/monthly/yearly. · Measure OEE (Operating Equipment Efficiency) as required. · Identify and quantify opportunities for improvements. · Recommend and implement improvements. · Respond to emergency failures as needed. · Actively support 6S policies and practices. · Support new equipment installations as required and develop spare parts lists. · Coordinate forklift and company vehicle maintenance. · Support the Maintenance Dept. and Supervisor to assure the maintenance systems are being followed properly. · Develop new and/or improve maintenance systems. · Assist with budget preparations for production and maintenance by identifying equipment and tooling needs and developing cost estimates. · Collect maintenance related data from the documents daily. · 3D modeling experience (Solidworks) Preferred · Design tooling and verify line startup for new part numbers and capabilities · Communicate with sales and product design team · Develop new products from initial quoting through production lifespan Education and Work Experience Requirements: · B.S. Degree in Mechanical Engineering · Thorough knowledge of machine design, Solidworks, tooling, machine installation & developing PFEMA. · Microsoft office skills · Training or working knowledge of statistical analysis processes · Ability to interpret data and engineering drawings · Must have strong organizational and time management skills · Must have good verbal and written communication and team building skills · Must have strong problem solving skills · Strong work ethic · TPS · TPM · 5S · Autonomous Maintenance · Root Cause Analysis · Cost justification analysis · SolidWorks · Continuous improvement techniques · Pokayoke

/ TITLE: Product Engineer For a leading manufacturer of suspension systems for heavy-duty vehicles, including applications such as emergency and utility vehicles. To lead overall suspension system design and development. This role is responsible for validating designs, managing design analysis projects, and driving continuous improvement initiatives. Essential Functions: Manage all technical aspects of major product design and development projects, and/or multiple smaller products, utilizing our standard Product Planning and Development Procedure. Design, validate, and provide test reports and sign-off documents to ensure production readiness. Design for manufacturing. Coordinate with CAD, FEA, and laboratory personnel, and interface effectively with other internal departments. Coordinate the technical design and test aspects of projects with suppliers and customers. Drive continuous improvement through employee development, process improvement, and the elimination of waste. Ensure safety in the lab and office environments. Manage value-added and value-engineered projects. Work with the product portfolio team throughout the product development process to define project objectives. Interface with the end-user for technical support calls and develop action plans as required. Other duties as assigned. Maintain regular attendance. Education and Training Bachelor of Science degree in Mechanical, Industrial, Agricultural, Aeronautical, or a related engineering field is required. Minimum Qualifications Four to six years of experience in vehicle structural design (heavy or medium-duty truck experience is highly preferred) with exposure to dynamic structural analysis, finite element analysis, fatigue analysis, and product design. Demonstrated ability to manage development projects and meet deadlines. Proven experience and skill in product innovation. Some controls experience is a plus. Exposure to or training in vehicle dynamics, vibration, or controls is desirable. Excellent written and verbal communication skills with the ability to lead a cross-functional launch effort. Self-starter with the ability to manage multiple projects simultaneously. Working knowledge of Computer-Aided Design and Analysis tools. Experience with GD&T and IATF 16949 or ISO 9001 is preferred. Occasional travel is required. Physical Demands Must be able to remain in a stationary position or move about frequently. Must be able to lift 50 lbs. Minimal need to move about inside the office and plant areas. Occasional fine motor skills are needed for tasks like typing, filing, and writing. Environmental Conditions Primary work is in an office environment. Minimal exposure to loud noises in plant areas. Behavioral Traits Innovative, receptive to feedback, and cooperative. Strong attention to detail. Skilled in facilitating groups. Experience in managing programs or projects. Strong self-management skills. A consistent safety focus. A committed team player.

We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us - and will continue to allow us - to grow. The result? Inspired people, amazing designs, and projects with purpose. Job Description Olsson's Site Design team provides design services for retail, commercial, mixed-use, and residential land development projects, along with industrial, sports, schools, and other site development types. As a summer 2026 civil engineering student intern, you will perform meaningful, hands-on, real-world work that will transform your classroom experience and help you envision your future career. You'll be part of our team, working for our clients on projects with our experienced staff and engineers. You'll assist with creating construction plans for sites that can include site layout, grading, stormwater, and utilities in AutoCAD and Civil 3D. You may also perform research, write technical reports, and travel to job sites. Qualifications You are passionate about: Working collaboratively with others. Having ownership in the work you do. Using your talents to positively affect communities. You bring to the team: Strong communication skills Ability to contribute and work well on a team Pursuing a degree in civil engineering Working knowledge of AutoCAD (Civil 3D is a plus) Proficiency in Microsoft Excel, Word, and Outlook Strong attention to detail Problem-solving and decision-making skills #LI-DNI Additional Information Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: Become an owner in the company after your first year through our Employee Stock Ownership Plan (ESOP) Engage in work that has a positive impact on communities Receive an excellent 401(k) match Participate in a wellness program promoting balanced lifestyles Benefit from a bonus system that rewards performance Have the possibility for flexible work arrangements Please note: The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting *********************************** Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the “CCPA”), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Notice here.

Collaborate with Innovative 3Mers Around the World Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. This position provides an opportunity to transition from other private, public, government or military experience to a 3M career. The Impact You'll Make in this Role The person hired for the position of Manufacturing Engineer will be responsible for safe and efficient manufacturing of several products to deliver results for EHS, quality, customer service, cost reductions and new product development. 3M Springfield currently produces adhesives, adhesive coated films, and sealants. As a Manufacturing Engineer, you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: * Development and implementation of improvements related to safety, quality, service, and cost (productivity) * Driving cost and productivity improvements by leading Continuous Improvement projects with a variety of toolsets, including standard work development, tier reviews and kaizens * Development and implementation of cross-functional projects, plans, and programs in support of business and strategic plans new process start-ups, new process technology integration, aggressive cost reduction, and supply chain improvement using Continuous Improvement tools * Proactively communicates project direction and status to appropriate personnel * Engagement and involvement in daily operations to meet service targets, including direction/support of maintenance and division engineering activities * Flexible to provide support across different shifts of manufacturing operations as needed. * Realize growth opportunities by guiding new product introduction efforts and completing experimental runs * Representing 3M Springfield during internal and external customer interactions and audits Your Skills and Expertise To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: * Bachelor's degree or higher in an engineering discipline (completed and verified prior to start) * Two (2) years of combined experience in project engineering, process engineering, manufacturing engineering, manufacturing technology, product development, quality experience in a private, public, government or military environment Additional qualifications that could help you succeed even further in this role include: * Master's degree or higher from an accredited university * Bachelor's degree in Chemistry, Chemical Engineering, Mechanical Engineering, Electrical Engineering or Industrial Engineering from an accredited institution * Five (5) years in one or more of the following areas: manufacturing engineering, process engineering, product engineering, and/or product development in a private, public, government or military environment * Experience in leading multi-functional teams through complex projects from planning to completion * Experience in supporting new product development and commercialization. * Excellent problem solving and analytical skills. * Excellent communication skills (oral, written and presentation) * Experience in lean manufacturing or Aerospace Industry * Self-starter/self-directed that leads with high energy and passion. * Experience with adhesives or liquid filling Location: Springfield, MO Travel: May include up to 5% domestic and/or international Relocation: Is authorized Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status). Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws. U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum. To comply with these laws, 3M must help assess candidates' U.S. person status. The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position. Supporting Your Well-being 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. Chat with Max For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: *************************************************************** Good Faith Posting Date Range 10/02/2025 To 11/01/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly. 3M Global Terms of Use and Privacy Statement Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here, select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms.

Civil Engineer IV Salary: Anticipated Starting Salary: $6,281 Monthly; Full Range: $6,281 - $9,792 Monthly Job Type: Salaried Category: Full Time County: Sangamon Number of Vacancies: 2 Bargaining Unit Code: NR916 Pro Tech Teamsters This position is a union position; therefore, provisions of the relevant collective bargaining agreement/labor contract apply to the filling of this position. All applicants who want to be considered for this position MUST apply electronically through the illinois.jobs2web.com website. State of Illinois employees should click the link near the top left to apply through the SuccessFactors employee career portal. Applications submitted via email or any paper manner (mail, fax, hand delivery) will not be considered. Why Work for Illinois? Working with the State of Illinois is a testament to the values of compassion, equity, and dedication that define our state. Whether you're helping to improve schools, protect our natural resources, or support families in need, you're part of something bigger-something that touches the lives of every person who calls Illinois home. No matter what state career you're looking for, we offer jobs that fit your life and your schedule-flexible jobs that provide the gold standard of benefits. Our employees can take advantage of various avenues to advance their careers and realize their dreams. Our top-tier benefits and great retirement packages can help you build a rewarding career and lasting future with the State of Illinois. Position Overview This position is responsible for the hydrologic and hydraulic analysis required for the design of large and complex drainage systems involving bridges, culverts, detention basins, pumping stations, and storm sewer systems. Essential Functions Prepares hydraulic reports for major and extremely complex structures. Analyzes, evaluates, and approves hydraulic reports prepared by consultants and district personnel. Performs field investigations and recommends corrective action for hydraulic problems. Performs hydrologic and hydraulic investigations. Develops, maintains, and implements the computer-aided hydraulic design systems. Trains district personnel in proper hydraulic analysis and computer applications. Performs duties in compliance with departmental safety rules. Performs all duties in a manner conducive to the fair and equitable treatment of all employees. Performs other duties as assigned. Minimum Qualifications Current registration as a Licensed Professional Engineer in the state of Illinois. Four years of experience in civil engineering. Preferred Qualifications Experience in highway engineering. Skill in the design of highways, streets, and structures and in making complete engineering plans and specifications. Ability to resolve complex hydrologic and hydraulic problems or discrepancies. Conditions of Employment The Conditions of Employment listed here are incorporated and related to any of the job duties as listed in the job description. Valid driver's license. Occasional statewide travel which may include overnight stays. Successful completion of a background screening. Certain provisions of the revolving door restrictions contained in 5 ILCS 430/5-45 apply to this position. As a result, the employee should be aware that if offered non-State employment during State employment or within one year immediately after ending State employment, the employee shall, prior to accepting any such non-State employment offer, notify the Office of the Executive Inspector General for the Agencies of the Illinois Governor (“OEIG”) or may be subject to a fine. About the Agency The Illinois Department of Transportation is seeking to hire Senior Hydraulics Engineers. The IDOT team works diligently to provide safe, cost-effective transportation for Illinois in ways that enhance quality of life, promote economic prosperity and protect our environment. We are problem solvers and leaders, constantly searching for innovations and improvements in support of our commitment to providing the best multimodal transportation system for Illinois. Our team fosters a culture of inclusivity. We value diversity and hold ourselves to the highest ethical standards as we work together for a common purpose. Team members frequently collaborate with colleagues and others outside the department to best meet customer needs. The department offers extensive training and career advancement opportunities. Employees also receive a robust benefit package including: Monday-Friday work schedule Flexible work schedules in several program areas (flexible time, hybrid scheduling) Health, Life, Vision, and Dental Insurance Pension Plan (12) Weeks paid Maternity/Paternity Leave Deferred Compensation Program and other pre-tax benefit programs (Medical/Daycare) Employees earn (12) paid Sick Days annually New Employees earn (10) paid Vacation Days their first year of service and can earn up to (25) paid Vacation Days annually Employees earn (3) paid Personal Days annually (13-14) paid holidays annually (based on start date) Tuition Reimbursement Employee Assistance Program and/or mental health resources We invite qualified applicants to apply to become part of our team. We are confident that you will take pride in serving Illinois and its residents and visitors. Certain provisions of the revolving door restrictions contained in 5 ILCS 430/5-45 apply to this position. As a result, the employee should be aware that if offered non-State employment during State employment or within one year immediately after ending State employment, the employee shall, prior to accepting any such non-State employment offer, notify the Office of the Executive Inspector General for the Agencies of the Illinois Governor (“OEIG”) or may be subject to a fine. Work Hours: Anticipated Starting Salary: $6,281 Monthly; Full Range: $6,281 - $9,792 Monthly Work Location: 2300 S Dirksen Pkwy Springfield, IL 62764-0001 Work Office: Office of Highways Project Implementation, Bureau of Bridges & Structures Agency Contact: ************************** Posting Group: Science, Technology, Engineering & Mathematics; Transportation APPLICATION INSTRUCTIONS Use the “Apply” button at the top right or bottom right of this posting to begin the application process. If you are not already signed in, you will be prompted to do so. State employees should sign in to the career portal for State of Illinois employees - a link is available at the top left of the Illinois.jobs2web.com homepage in the blue ribbon. Non-State employees should log in on the using the “View Profile” link in the top right of the Illinois.jobs2web.com homepage in the blue ribbon. If you have never before signed in, you will be prompted to create an account. If you have questions about how to apply, please see the following resources: State employees: Log in to the career portal for State employees and review the Internal Candidate Application Job Aid Non-State employees: on Illinois.jobs2web.com - click “Application Procedures” in the footer of every page of the website. Seasonal and temporary workers should use a personal e-mail address when applying for jobs. The main form of communication will be through email. Please check your “junk mail”, “spam”, or “other” folder for communication(s) regarding any submitted application(s). You may receive emails from the following addresses: ****************************** ***************************

Job DescriptionSalary: Be Part of Something Big. Build What Matters At KCI Construction, we dont just build projectswe build possibilities. As a 100% employee-owned company, every success we achieve belongs to the people who make it happen. Were builders, innovators, and problem-solvers who take pride in doing things the right waywith integrity, teamwork, and craftsmanship at the core of everything we do. Nows your chance to make an impact. Join our team as a Project Engineer on a$65 million design-build project, where youll be hands-on on site, helping bring an ambitious vision to life from the ground up. Youll work alongside seasoned leaders and skilled crews, learning from the best while making your mark on something extraordinary. Why Youll Love It Here Enjoy competitive benefits Competitive Pay, ESOP participation, 401(k), bonuses and 100% paid health coverage. Learn from experienced mentors Work alongside project managers, superintendents, and leaders who are invested in your development. Gain hands-on experience Be on-site daily, learning how major design-build projects come together from planning to completion. Take on real responsibility Contribute meaningfully to project success while sharpening your technical and problem-solving skills. Grow your career and ownership As a 100% employee-owned company, your success directly contributes to your future. What Youll Do Support the day-to-day management of construction activities on site. Coordinate and track submittals, RFIs, and shop drawings. Monitor production on self-performed work and assist with scheduling. Attend and document progress meetings; prepare project status reports. Maintain accurate project documentation, including as-builts and close-out materials. Collaborate with owners, architects, engineers, and subcontractors to resolve issues. Assist with cost tracking and project schedule updates. Perform additional duties as assigned. Who You Are A proactive, detail-oriented professional who thrives in dynamic, fast-paced environments. A strong communicator who works well with both field and office teams. A problem-solver who takes initiative and follows through with accountability. A motivated learner eager to grow in an employee-owned company that values craftsmanship and teamwork. Aligned with KCI GRiT Values. What You Bring Bachelors degree in construction management, Civil Engineering, or related field. 1 to 3 years of experience supporting large-scale commercial or design-build projects. Ability to read and interpret construction drawings and specifications. Proficiency in Microsoft Office; Experience with P6 and Vista a plus. Strong organizational and time management skills with a commitment to safety and excellence. Ability to work on a construction site for the duration of the project. At KCI, youre not just building projects youre building your career, your future, and a legacy you can be proud of. KCI is proud to be an Equal Opportunity and affirmative action employer regardless of race, color, gender, age, sexual orientation, gender identity, religious beliefs, material status, genetic information, national origin, disability or protection veteran status.

Job DescriptionMulti-state design firm is seeking a Roadway Project Engineer for their team in Springfield, Missouri! Responsibilities: Serve as project manager on small projects Prepare planning/design documents Preform design calculations Assist with development of project schedules & budgets Coordinate project tasks Travel on occasion to meeting, site visits and inspections Requirements: Bachelor's Degree in Civil Engineering 5+ years of experience PE License Experience leading staff through all phases of project Proficient in MicroStation and/or AutoCAD Salary is commensurate with experience. Successful applicant must be authorized to work in the USA without sponsorship. All qualified applicants will receive consideration for employment without regard to protected veteran status, disability, race, color, religion, sex, sexual orientation, gender identity, or national origin. Please contact Laura Harrison for further information! *********************************** ************

Please, review and apply for this position through the QCI system following the link below (Copy and Paste): http://bit.ly/1I7N4wI *You can apply through Indeed using mobile devices with this link. Job Description Manufacturing operation near Springfield, MO is searching for a Mechanical Project Engineer with 2+ years of applicable experience. BSME or BS Engineering required. Qualified candidate should have experience with manufacturing equipment projects and estimating, designing, planning, organizing, controlling, integrating and completing projects to support manufacturing and corporate facilities and systems. Candidate should have experience with equipment design of electrical/mechanical systems, CAD, Microsoft Project, Microsoft Suite, solving/troubleshooting problems, etc. Additional Information All your information will be kept confidential according to EEO guidelines.

About Us: Cochran is a growing civil engineering firm with 7 Missouri offices, offering services in construction administration, materials testing, architectural and geotechnical engineering, and land surveying. Serving both public and private sectors, Cochran's expertise spans municipal, commercial, residential, transportation, water/wastewater, site development, retail, planning, and interior design. With 120+ professionals, the firm delivers tailored solutions backed by deep expertise and is guided by core values of teamwork, excellence, quality, and trust-ensuring principal involvement and outstanding service throughout every project. Cochran's Ozark, Missouri headquarters' location, is looking for a Project Engineer with Water/Wastewater experience to join our team. Position Summary: We are seeking a Project Engineer with experience in water and wastewater infrastructure projects to join our team. The ideal candidate has a solid foundation in design and project coordination, holds an EIT certification, and is either actively pursuing or recently earned their Professional Engineer (PE) license. Key Responsibilities: Support and lead water/wastewater engineering projects from planning and design through construction Prepare engineering calculations, technical reports, design plans, and specifications Assist in project management tasks, including budgeting, scheduling, and client coordination Conduct field investigations and site visits as needed Ensure projects comply with local, state, and federal regulations Collaborate with multidisciplinary teams and mentor junior staff Review and respond to RFIs, submittals, and contractor inquiries during construction Qualifications: Bachelor's degree in Civil or Environmental Engineering EIT certification required PE license preferred, or actively pursuing PE licensure 3-6 years of relevant experience in water and wastewater design and construction Proficiency in AutoCAD Civil 3D and/or other relevant design software Strong written and verbal communication skills Ability to work independently and as part of a collaborative team Preferred Experience: Municipal or utility client experience Familiarity with permitting processes and regulatory agencies (e.g., EPA, DNR) Hydraulic modeling software (e.g., WaterCAD, SewerCAD) Benefits: Competitive salary and performance bonuses 100% company paid Medical, Dental, Vision, Life, and Long-Term Disability insurance for employees, plus company deductible assistance 401(k) with 4% company match Generous PTO plan and 7 major holidays Professional development and licensing support

Job purpose The Manufacturing Engineer partners cross-functionally to create cost effective, innovative and state of the art processes to manufacture and assemble our products. This role enables a culture of continuous improvement and ownership while using forward-thinking principles to reduce complexity and simplify processes within the organization. Ultimately this role provides leadership and advances the business within and beyond the operational areas. This will be accomplished through experience, knowledge / data gathering, time observations, statistical analysis, and by implementing Lean Manufacturing methods. The ideal candidate will blend engineering rigor with hands-on problem solving to deliver measurable gains in efficiency, quality and safety on the manufacturing floor and throughout all our processes. Essential Duties and Responsibilities * Leads the continuous improvement process and the CIT (Continuous Improvement Team). * Helps conduct capacity planning and supports and executes plans to ensure capacity meets demand. * Presents and communicates project, department, and organization status to the business on a regular basis. * Supports organizational sustainability implementation as these efforts evolve. * Conduct value stream mapping (VSM), time studies, and work-in-process (WIP) analysis to identify non-value added activities. * Design and optimize cell layouts, flow paths, and production line configurations. * Collaborate with cross-functional teams (production, quality, engineering, maintenance, sourcing, and safety) to drive continuous improvement projects. * Lead Kaizen events and rapid improvement workshops, including problem definition, root cause analysis (e.g., A3, 5 why), solution selection and implementation. * Develop and maintain standard operating procedures (SOP's and work instructions). * Develop and implement standardized work, error-proofing (poka-yoke), 5S, and visual management systems. * Facilitates capital equipment justification, specification, budget management and ROI analysis. * Proactively resolves process related problems before they can impact promised customer ship dates. * Employs lean methodologies and tools in order to improve production efficiency. * For new projects, determines the manufacturing process (equipment, tooling, gauges, etc.) to build in the least waste way. * Determine the capital, the manpower, workspace and layout, proposed capacity, and timing to implement. * Utilizes time studies to document current production processes, eliminate waste, and to determine the current least waste way. * Breaks down barriers to change, in a professional manner, becomes the change agent for the organization. * Relies on education, experience, research of latest manufacturing methods, and training to plan and accomplish goals. * Performs a variety of tasks as needed to accomplish organizational goals. * Knowledge of safety and regulatory standards relevant to manufacturing environment (e.g., ISO9001 and OSHA). Qualifications Education * Bachelors degree in Mechanical or Manufacturing Engineering preferred; not required, Master's Degree a plus. Specialized Knowledge and Experience * A lean certification, through an accredited organization is preferred. * At least 5-10 years of progressive manufacturing engineering or operations leadership experience is required. * Familiar with metal fabrication, assembly, and painting processes. * Strong business and financial acumen. * Familiarity with ERP systems. Skills and Abilities PC Skills * Microsoft Office Suite of products * CAD and/or 3D modeling software Other Skills * Requires the interpersonal skills to interact and collaborate with wide variety of internal personnel. * Requires the attention to detail necessary to drive large improvement projects. * Must be able to interact professionally, appropriately, and courteously with customers, co-workers and other outside parties. * Excellent communication skills both written and verbal; * Must be detail oriented, with the ability to successfully follow-through. Travel Limited travel is required for this position. Physical requirements The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this Job, the employee must be able to stand and walk for extended periods of time; use hands to finger, handle, or feel; reach with hands and arms; and must be able to talk and hear. The employee must be able to lift and /or move up to 25 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, and depth perception. Must observe safety procedures and use equipment and materials properly; must wear safety glasses and steel toe boots or other PPE as required. Additional Information This job description is not necessarily an exhaustive list of all responsibilities, skills, duties, requirements, efforts, or working conditions associated with the job. While it is intended to be an accurate reflection of the current job, management reserves the right to revise the job or require that other or different duties/tasks be performed. I have read, understand, and can perform the essential functions of this job with or without reasonable accommodation.

Job Description HiFyve is hiring an Entry-Level Mechanical Engineer in Springfield, MO! Shift: Days Salary: $55K-$60K Benefits: Full Package Job Responsibilities Assist in the design, development, and testing of mechanical components, assemblies, and systems. Create detailed 2D/3D CAD models, drawings, and documentation. Support prototype fabrication, assembly, and testing. Perform engineering calculations, tolerance analysis, and basic simulations. Collaborate with senior engineers, manufacturing teams, and suppliers on design updates and improvements. Troubleshoot mechanical issues and support root-cause investigations. Prepare reports, technical documentation, and presentations as needed. Contribute to continuous improvement initiatives and product optimization. Qualifications Bachelor's degree in Mechanical Engineering (or related engineering discipline). Proficiency with CAD software (SolidWorks, Inventor, Creo, or similar). Strong understanding of mechanical design principles, materials, and manufacturing processes. Basic knowledge of GD&T, engineering drawings, and tolerance standards. Ability to work hands-on with tools, prototypes, and test equipment. Strong problem-solving skills and attention to detail. Excellent communication and teamwork abilities. Internship, co-op, or project experience is a plus but not required. If you are interested, please apply.

**Collaborate with Innovative 3Mers Around the World** Choosing where to start and grow your career has a major impact on your professional and personal life, so it's equally important you know that the company that you choose to work at, and its leaders, will support and guide you. With a wide variety of people, global locations, technologies and products, 3M is a place where you can collaborate with other curious, creative 3Mers. **This position provides an opportunity to transition from other private, public, government or military experience to a 3M career.** **The Impact You'll Make in this Role** The person hired for the position of Manufacturing Engineer will be responsible for safe and efficient manufacturing of several products to deliver results for EHS, quality, customer service, cost reductions and new product development. 3M Springfield currently produces adhesives, adhesive coated films, and sealants. As a **Manufacturing Engineer** , you will have the opportunity to tap into your curiosity and collaborate with some of the most innovative people around the world. Here, you will make an impact by: + Development and implementation of improvements related to safety, quality, service, and cost (productivity) + Driving cost and productivity improvements by leading Continuous Improvement projects with a variety of toolsets, including standard work development, tier reviews and kaizens + Development and implementation of cross-functional projects, plans, and programs in support of business and strategic plans new process start-ups, new process technology integration, aggressive cost reduction, and supply chain improvement using Continuous Improvement tools + Proactively communicates project direction and status to appropriate personnel + Engagement and involvement in daily operations to meet service targets, including direction/support of maintenance and division engineering activities + Flexible to provide support across different shifts of manufacturing operations as needed. + Realize growth opportunities by guiding new product introduction efforts and completing experimental runs + Representing 3M Springfield during internal and external customer interactions and audits **Your Skills and Expertise** To set you up for success in this role from day one, 3M requires (at a minimum) the following qualifications: + Bachelor's degree or higher in an engineering discipline (completed and verified prior to start) + Two (2) years of combined experience in project engineering, process engineering, manufacturing engineering, manufacturing technology, product development, quality experience in a private, public, government or military environment **Additional qualifications that could help you succeed even further in this role include:** + Master's degree or higher from an accredited university + Bachelor's degree in Chemistry, Chemical Engineering, Mechanical Engineering, Electrical Engineering or Industrial Engineering from an accredited institution + Five (5) years in one or more of the following areas: manufacturing engineering, process engineering, product engineering, and/or product development in a private, public, government or military environment + Experience in leading multi-functional teams through complex projects from planning to completion + Experience in supporting new product development and commercialization. + Excellent problem solving and analytical skills. + Excellent communication skills (oral, written and presentation) + Experience in lean manufacturing or Aerospace Industry + Self-starter/self-directed that leads with high energy and passion. + Experience with adhesives or liquid filling **Location: Springfield, MO** **Travel: May include up to 5% domestic and/or international** **Relocation: Is authorized** **Must be legally authorized to work in country of employment without sponsorship for employment visa status (e.g., H1B status).** _Responsibilities of this position may include direct and/or indirect physical or logical access to information, systems, technologies subjected to the regulations/compliance with U.S. Export Control Laws._ _U.S. Export Control laws and U.S. Government Department of Defense contracts and sub-contracts impose certain restrictions on companies and their ability to share export-controlled and other technology and services with certain "non-U.S. persons" (persons who are not U.S. citizens or nationals, lawful permanent residents of the U.S., refugees, "Temporary Residents" (granted Amnesty or Special Agricultural Worker provisions), or persons granted asylum._ _To comply with these laws, 3M must help assess candidates' U.S. person status._ _The questions asked in this application are intended to assess this and will be used for evaluation purposes only. Failure to provide the necessary information in this regard will result in our inability to consider you further for this particular position._ **Supporting Your Well-being** 3M offers many programs to help you live your best life - both physically and financially. To ensure competitive pay and benefits, 3M regularly benchmarks with other companies that are comparable in size and scope. **Chat with Max** For assistance with searching through our current job openings or for more information about all things 3M, visit Max, our virtual recruiting Applicable to US Applicants Only:The expected compensation range for this position is $98,413 - $120,282, which includes base pay plus variable incentive pay, if eligible. This range represents a good faith estimate for this position. The specific compensation offered to a candidate may vary based on factors including, but not limited to, the candidate's relevant knowledge, training, skills, work location, and/or experience. In addition, this position may be eligible for a range of benefits (e.g., Medical, Dental & Vision, Health Savings Accounts, Health Care & Dependent Care Flexible Spending Accounts, Disability Benefits, Life Insurance, Voluntary Benefits, Paid Absences and Retirement Benefits, etc.). Additional information is available at: **************************************************************** Good Faith Posting Date Range 10/02/2025 To 11/01/2025 Or until filled All US-based 3M full time employees will need to sign an employee agreement as a condition of employment with 3M. This agreement lays out key terms on using 3M Confidential Information and Trade Secrets. It also has provisions discussing conflicts of interest and how inventions are assigned. Employees that are Job Grade 7 or equivalent and above may also have obligations to not compete against 3M or solicit its employees or customers, both during their employment, and for a period after they leave 3M. Learn more about 3M's creative solutions to the world's problems at ********** or on Instagram, Facebook, and LinkedIn @3M. Responsibilities of this position include that corporate policies, procedures and security standards are complied with while performing assigned duties. Safety is a core value at 3M. All employees are expected to contribute to a strong Environmental Health and Safety (EHS) culture by following safety policies, identifying hazards, and engaging in continuous improvement. Pay & Benefits Overview: https://**********/3M/en\_US/careers-us/working-at-3m/benefits/ 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law. **Please note: your application may not be considered if you do not provide your education and work history, either by: 1) uploading a resume, or 2) entering the information into the application fields directly.** **3M Global Terms of Use and Privacy Statement** Carefully read these Terms of Use before using this website. Your access to and use of this website and application for a job at 3M are conditioned on your acceptance and compliance with these terms. Please access the linked document by clicking here (************************************************************************************************* , select the country where you are applying for employment, and review. Before submitting your application, you will be asked to confirm your agreement with the terms. At 3M we apply science in collaborative ways to improve lives daily as our employees connect with customers all around the world. Learn more about 3M's creative solutions to global challenges at ********** or on Twitter @3M or @3MNews. 3M does not discriminate in hiring or employment on the basis of race, color, sex, national origin, religion, age, disability, veteran status, or any other characteristic protected by applicable law.

Dallas, TX; Fayetteville, AR; Fort Worth, TX; Joplin, MO; Omaha, NE; Overland Park, KS; Springfield, MO ** We are Olsson, a team-based, purpose-driven engineering and design firm. Our solutions improve communities, and our people make it possible. Our most meaningful asset is our people, and we are dedicated to providing an environment where they can continue to learn, grow, and thrive. Our entrepreneurial spirit is what has allowed us - and will continue to allow us - to grow. The result? Inspired people, amazing designs, and projects with purpose. **Job Description** Imagine shaping the future of energy. As part of Olsson's Transmission and Substation team, you'll design and deliver the infrastructure that powers communities and supports renewable integration. Our work strengthens the grid, improves reliability, and prepares for tomorrow's energy demands. From concept to construction, you'll help bring high-voltage transmission lines and substation facilities to life-projects you can take pride in every time you drive by. Join our team as a Transmission Design Engineer. In this role, you'll build expertise in transmission line design, substation engineering, and protection and control systems. You'll support senior engineers through all phases of a project, ensuring high-quality deliverables and exceptional client service. Primary Responsibilities + Design and analyze transmission and substation systems. + Collaborate with cross-functional teams on complex projects. + Participate in site visits and field inspections. + Prepare technical reports and documentation. + Continue learning and growing professionally. **Qualifications** **You are passionate about:** + Working collaboratively with others. + Having ownership in the work you do. + Using your talents to positively affect communities. **You bring to the team:** + Strong communication skills. + Ability to contribute and work well with a team. + Excellent interpersonal and problem-solving skills. + Bachelor's degree in engineering, civil or structural preferred. + Four or more years of engineering design experience. + Registered professional engineer (PE), a plus. \#LI-DD1 **Additional Information** Olsson is a nationally recognized, employee-owned firm specializing in planning and design, engineering, field services, environmental, and technology. Founded in 1956 on the very mindset that drives us today, we're here to improve communities by making them more sustainable, better connected, and more efficient. Simply put, we work to leave the world better than we found it. As an Olsson employee, you'll receive our traditional benefits package (health care, vision, dental, paid time off, etc.), plus you'll: + Engage in work that has a positive impact on communities + Receive an excellent 401(k) match + Participate in a wellness program promoting balanced lifestyles + Benefit from a bonus system that rewards performance + Have the possibility for flexible work arrangements **Please note:** The benefits listed above apply to full-time employees. If you're applying for an internship, you can learn more about internship-specific offerings and experiences at Olsson by visiting ********************************** . Olsson is an Equal Opportunity Employer. We encourage qualified minority, female, veteran, and disabled candidates to apply and be considered for open positions. We do not discriminate against any applicant for employment or any employee because of race, color, religion, national origin, sex, sexual orientation, gender identity, gender, disability, age, military status, or other protected status. Olsson understands the importance of privacy and is committed to protecting job applicants' personal information. Pursuant to the California Consumer Privacy Act, as amended by the California Privacy Rights Act (collectively, the "CCPA"), this notice explains Olsson's practices regarding the collection, use, and disclosure of personal information for job applicants residing in California. Please read this Notice carefully to understand our privacy practices. For more information about the types of information we collect and how we use it in connection with your general access and use of our website, please review our general California Privacy Noticehere (************************************** . Create a Job Alert Interested in building your career at Olsson? Get future opportunities sent straight to your email.

Design Engineer BH Job ID: 3331 SF Job Req ID: 15870 Ingersoll Rand is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to age, ancestry, color, family or medical care leave, gender identity or expression, genetic information, marital status, medical condition, national origin, physical or mental disability, political affiliation, protected veteran status, race, religion, sex (including pregnancy), sexual orientation, or any other characteristic protected by applicable laws, regulations and ordinances. Job Title: Design Engineer Location: Springfield, MO About Us: Imagine a company with technology leadership of over 160 years, yet it operates with the energy of a startup. Ingersoll Rand has dedicated itself to Making Life Better for its employees, customers, shareholders, and planets. We produce innovative and mission-critical flow creation and life science technologies - from compressors to precision handling of liquids, gasses, and powers - to increase industrial productivity, efficiency, and sustainability. Supported by over 80+ brands, our products are used in various end-markets including life sciences, food and beverage, clean energy, industrial manufacturing , infrastructure, and more. Across the globe, we're driving growth with an entrepreneurial spirit and ownership mindset. Learn more at irco.com and join us to own your future. Job Overview: Ingersoll Rand has an exciting opportunity for a Design Engineer (Systems Engineer) in Springfield, MO. The responsibilities of the position include designing, developing, and implementing engineering solutions to support our diverse range of products and services. This role requires a blend of technical expertise, creativity, and a strong commitment to quality and innovation. You will work closely with Product Management , Customer Service, Sales, and other cross-functional teams to design custom solutions for unique customer applications in a Global Market. Responsibilities: * Interpret Customer Specifications to appropriate size and offer the correct product for their application. * Creation of 3D Models, Drawings, P&IDs, and other documentation as the project requires. * Process the orders received for Engineered Solutions by creating the required part numbers, Bills of Materials, and test procedures required for production to build, test, and ship the product. * Provide costing to Product Management for the custom solution that Engineering designs. * Daily work in Salesforce, PTC Windchill and SAP to execute Quotations, Orders, and Technical Questions as required. * Support product engineering and operations initiatives (NPD, i2V, product rationalization, etc.) through business case analysis and project execution. * Determines the development or purchase of capital equipment. * Interacts with design, manufacturing and suppliers. * Assists internal and external suppliers with processing problems and troubleshooting to find root causes. * Ensures safety designed into all processes and implements safety corrective actions required to eliminate safety risks. * Attend various online meetings as required with internal and external customers as it relates to projects. Requirements: * Bachelor's degree in engineering (Mechanical, Electrical, Industrial , or related field). * 4+ years of experience in an engineering role in manufacturing or industrial environment. * 3+ years of experience with CAD software (e.g. SolidWorks, AutoDesk, PTC Creo) and other engineering tools. Core Competencies: * Technical Proficiency: Strong understanding of engineering principles, CAD software, and industry standards. * Problem-Solving Skills: Ability to identify and resolve complex issues creatively and effectively. * Project Management: Experience managing multiple projects with strong organizational skills. * Communication Skills: Effective verbal and written communication with the ability to collaborate with cross-functional teams. * Adaptability and Innovation: Flexibility to adapt to changes, openness to new ideas, and drive continuous improvement. Preferences: * Industry experience with rotating machinery * Experience with project management * Strong problem-solving skills and attention to detail * Excellent communication and teamwork abilities * Knowledge of industry standards and regulations * Ability to manage multiple projects and meet deadlines Travel & Work Arrangements/Requirements: Onsite What We Offer: At Ingersoll Rand, we embrace a culture of personal ownership - taking responsibility for our company, our communities, and our environment, as well as our individual health and well-being. Our comprehensive benefits package is designed to empower you with the tools and support necessary to take charge of your health, ensuring that together, we can continue to make life better. Our range of benefits includes health care options like medical and prescription plans, dental and vision coverage, as well as wellness programs. Additionally, we provide life insurance, a robust 401(k) plan, paid time off, and even an employee stock grant, among other offerings. These benefits are our commitment to you, so you can be your best at work and beyond. Ingersoll Rand Inc. (NYSE:IR), driven by an entrepreneurial spirit and ownership mindset, is dedicated to helping make life better for our employees, customers and communities. Customers lean on us for our technology-driven excellence in mission-critical flow creation and industrial solutions across 40+ respected brands where our products and services excel in the most complex and harsh conditions. Our employees develop customers for life through their daily commitment to expertise, productivity and efficiency. For more information, visit *************

Job Description About Us: Cochran is a growing civil engineering firm with 7 Missouri offices, offering services in construction administration, materials testing, architectural and geotechnical engineering, and land surveying. Serving both public and private sectors, Cochran's expertise spans municipal, commercial, residential, transportation, water/wastewater, site development, retail, planning, and interior design. With 120+ professionals, the firm delivers tailored solutions backed by deep expertise and is guided by core values of teamwork, excellence, quality, and trust-ensuring principal involvement and outstanding service throughout every project. Cochran's Ozark, Missouri headquarters' location, is looking for a Project Engineer with Water/Wastewater experience to join our team. Position Summary: We are seeking a Project Engineer with experience in water and wastewater infrastructure projects to join our team. The ideal candidate has a solid foundation in design and project coordination, holds an EIT certification, and is either actively pursuing or recently earned their Professional Engineer (PE) license. Key Responsibilities: Support and lead water/wastewater engineering projects from planning and design through construction Prepare engineering calculations, technical reports, design plans, and specifications Assist in project management tasks, including budgeting, scheduling, and client coordination Conduct field investigations and site visits as needed Ensure projects comply with local, state, and federal regulations Collaborate with multidisciplinary teams and mentor junior staff Review and respond to RFIs, submittals, and contractor inquiries during construction Qualifications: Bachelor's degree in Civil or Environmental Engineering EIT certification required PE license preferred, or actively pursuing PE licensure 3-6 years of relevant experience in water and wastewater design and construction Proficiency in AutoCAD Civil 3D and/or other relevant design software Strong written and verbal communication skills Ability to work independently and as part of a collaborative team Preferred Experience: Municipal or utility client experience Familiarity with permitting processes and regulatory agencies (e.g., EPA, DNR) Hydraulic modeling software (e.g., WaterCAD, SewerCAD) Benefits: Competitive salary and performance bonuses 100% company paid Medical, Dental, Vision, Life, and Long-Term Disability insurance for employees, plus company deductible assistance 401(k) with 4% company match Generous PTO plan and 7 major holidays Professional development and licensing support