Jobs that use mechanical systems the most include hvac controls technician, mechanical systems engineer, and mechanical system technician.
| Rank | Job title | Salary | % of all skills | Job openings |
|---|---|---|---|---|
| 1 | Hvac Controls Technician | $54,632 | 16% | 81,166 |
| 2 | Mechanical Systems Engineer | $85,387 | 15% | 158,980 |
| 3 | Mechanical System Technician | $48,793 | 11% | 36,492 |
| 4 | Mechanic/Manager | $76,315 | 9% | 39,481 |
| 5 | Insulation Helper | $29,729 | 9% | 13,897 |
| 6 | Pipe Insulator | $39,715 | 8% | 11,402 |
| 7 | Machine Repairer | $53,387 | 8% | 34,547 |
| 8 | Lead Operations Engineer | $104,981 | 7% | 84,056 |
| 9 | Mechanical Contractor | $72,882 | 7% | 28,897 |
| 10 | Commission Specialist | $81,702 | 7% | 19,983 |
What jobs use Mechanical Systems the most?
1. Hvac Controls Technician
How hvac controls technician uses Mechanical Systems:
- Install motors, pumps, plumbing equipment.
- Replace and repair pneumatic and electrical valves, controllers, switches, relays, dampers.
- Provide assistance to new installation of residential condensers and heating units.
Most common skills for hvac controls technician:
- Mechanical Systems
- Customer Satisfaction
- Hand Tools
- Customer Service
- Building Automation Systems
- Systems Software
2. Mechanical Systems Engineer
How mechanical systems engineer uses Mechanical Systems:
- Manage refueling rig project (SolidWorks models, electronics layout, BOM and PLC programming).
- Initiate and lead development of in-house rapid prototyping and machine shop facilities, and prepare and institute associated training.
- Design test equipment used for customers using SolidWorks and AutoCAD as well as SURFCAM software.
Most common skills for mechanical systems engineer:
- Mechanical Systems
- CAD
- System Design
- Solidworks
- Project Management
- FEA
3. Mechanical System Technician
How mechanical system technician uses Mechanical Systems:
- Plan and lead training programs on new software development essential to the movement to a paperless travel department for DoD.
- Operate instrumentation and telemetry systems comprise of components such as transmitters, recorders, computers, data conditioning and conversion equipment.
- Train all new employees in assembling RF cables and connectors, soldering, measure and using mechanical tools.
Most common skills for mechanical system technician:
- Troubleshoot
- Plumbing
- Mechanical Systems
- NASA
- HVAC
- Hand Tools
4. Mechanic/Manager
How mechanic/manager uses Mechanical Systems:
- Manage facility repairs on heating and cooling systems plumbing and all carpentry.
- Manage routine maintenance and modifications for locomotives as well as preventative maintenance for freight cars.
- Read equipment schematics and troubleshoot any faults.
Most common skills for mechanic/manager:
- Plumbing
- Direct Reports
- Electrical Systems
- Cost Estimates
- Mechanical Systems
- Business Development
5. Insulation Helper
How insulation helper uses Mechanical Systems:
- Work under senior technician installing replacement windows and patio doors in residential houses
- Install insulation in walls and ceilings -Use stilts -Keep inventory of product
Most common skills for insulation helper:
- Safety Procedures
- Tape Measure
- Mechanical Systems
- Asphalt
- Heat Exchangers
- Scaffolding
6. Pipe Insulator
How pipe insulator uses Mechanical Systems:
- Prepare a multitude of surfaces for insulation application by brushing/spreading adhesives, cement or asphalt to surfaces.
- Insulate pipe and HVAC systems.
- Assist building work packages by making copies of iso drawings and ensuring proper drawings are in daily work book.
Most common skills for pipe insulator:
- HVAC
- Tape Measure
- Safety Procedures
- Asphalt
- Mechanical Systems
- Control Noise
7. Machine Repairer
How machine repairer uses Mechanical Systems:
- Repair broken parts, using brazing, soldering and welding equipment and hand tools.
- Utilize PLC software to facilitate troubleshooting.
- Sanitize equipment for production runs as per FDA regulations and standard operating procedures.
Most common skills for machine repairer:
- Machine Tools
- Spindles
- Hand Tools
- Mechanical Systems
- Cranes
- Grinders
8. Lead Operations Engineer
How lead operations engineer uses Mechanical Systems:
- Accomplish responsibility to configure, administer and support new infrastructure solutions on Microsoft platforms to meet enterprise level requirements.
- Integrate JIRA in with SVN and dealing with its administration in change management process.
- Create and apply standard and extend IP access lists to routers for security measures.
Most common skills for lead operations engineer:
- Preventative Maintenance
- HVAC
- Plumbing
- Mechanical Systems
- Electrical Systems
- Roofing
9. Mechanical Contractor
How mechanical contractor uses Mechanical Systems:
- Lead all CFD and FEA (shock and vibration) efforts, including product-performance optimization and impact of DFMA.
- Lead weekly toolbox safety meetings, and monitor work to ensure full compliance with OSHA / HAZWHOPPER compliance requirements.
- Manage paperwork associate with HVAC procedures.
Most common skills for mechanical contractor:
- Plumbing
- CAD
- Preventive Maintenance
- Mechanical Systems
- Ice Machines
- Heat Pumps
10. Commission Specialist
How commission specialist uses Mechanical Systems:
- Accomplish through collaboration with corporate finance to analyze bad debt reserve and recommend monthly accruals.
- Develop CVC (construction verification checklist) for HVAC and electrical equipment.
- Conduct exhaustive functional testing with optimization and balancing to NEBB guidelines on mechanical systems, HVAC and environmental controls.
Most common skills for commission specialist:
- Start-Up
- HVAC
- Calculation
- Mechanical Systems
- Commission Statements
- Commission Calculations
11. Junior Mechanical Engineer
How junior mechanical engineer uses Mechanical Systems:
- Use of PLM software tools such as WindChill to manage data, revisions, iterations and approvals.
- Design HVAC systems and plumbing layouts for various large and small-scale projects at different stages right from conceptual to implementation stage.
- Implement ductwork into AutoCAD or REVIT models.
Most common skills for junior mechanical engineer:
- Mechanical Engineering
- Solidworks
- Mechanical Systems
- HVAC
- Mechanical Design
- Prototype
12. Apprentice To Journeyman
How apprentice to journeyman uses Mechanical Systems:
- Assist in the installation of emt, rigid and flexible conduit systems and the required wiring.
- Install PVC and cast iron waste lines, copper and plastic water lines, and plumbing fixtures.
- Review specifications and check installation quality of all journeymen and apprentices to comply with NEC and job specifications.
Most common skills for apprentice to journeyman:
- Apprenticeship Program
- HVAC
- Electrical Systems
- Mechanical Systems
- Shovels
- Maintenance Procedures
13. Insulation Mechanic
How insulation mechanic uses Mechanical Systems:
- Install PVC and sheet metal jacketing where specify.
- Apply appropriate insulation materials to HVAC lines, grease duct, tanks, etc.
- Insulate pipe and and install scaffolding in chemical plants, see mills and oil refineries.
Most common skills for insulation mechanic:
- Hand Tools
- Tape Measure
- Asphalt
- Mechanical Systems
- Aluminum
- Heat Exchangers
14. Mechanical Engineer
How mechanical engineer uses Mechanical Systems:
- Manage machine shop and Sr. Machinist/Toolmaker.
- Lead the implementation of Syteline MRP software.
- Manage component work orders and failure test scheduling to parts as per DFMEA with design team.
Most common skills for mechanical engineer:
- CAD
- Solidworks
- Mechanical Systems
- Mechanical Design
- HVAC
- Plumbing
15. Manufacturing/Mechanical Engineer
How manufacturing/mechanical engineer uses Mechanical Systems:
- Collaborate with internal company users to manage software and database improvements.
- Lead several independent, cross-functional projects and improve manufacturing quality, reduce cost, ensure environment are supported and FDA compliant.
- Perform lab analysis on parts to confirm FEA solutions.
Most common skills for manufacturing/mechanical engineer:
- Lean Manufacturing
- Solidworks
- Mechanical Systems
- Corrective Action
- Hand Tools
- Process Control
16. Associate Mechanical Engineer
How associate mechanical engineer uses Mechanical Systems:
- Attain SolidWorks CSWP certification and maintaining proficiency within CREO & AutoCad
- Participate in FMEA s and recommend design improvements.
- Document and confirm risk management activities (DFMEA & PFMEA).
Most common skills for associate mechanical engineer:
- CAD
- Mechanical Design
- Solidworks
- Mechanical Systems
- Engineering Design
- FEA
17. Insulator
How insulator uses Mechanical Systems:
- Prepare surfaces for insulation application, brushing or spreading on adhesive cement or asphalt.
- Assist journeymen with insulation of pipes, air ducts, heating and cooling systems.
- Involve insulating chill, hot water, and cryogenic plumbing as well as HVAC ducts in refineries and commercial buildings.
Most common skills for insulator:
- Safety Procedures
- Tape Measure
- Ladders
- Asphalt
- Mechanical Systems
- Storage Tanks
18. Lead Mechanical Engineer
How lead mechanical engineer uses Mechanical Systems:
- Optimize structural design of bolted/weld cabinet with analyst using ANSYS to achieve desire weight of structure.
- Manage outside contractors as an adept mechanical engineer, experience in plumbing.
- Provide mechanical design and sustaining engineering expertise to troubleshoot manufacturing defect trends and achieve a more robust and producible product.
Most common skills for lead mechanical engineer:
- Mechanical Engineering
- CAD
- Solidworks
- Mechanical Systems
- Mechanical Design
- FEA
19. Electro-Mechanical Engineer
How electro-mechanical engineer uses Mechanical Systems:
- Control and manage the testing documentation of magnetics and mechanical documents using custom small scale PDM system base on windows files.
- Provide mechanical design and sustaining engineering expertise to troubleshoot manufacturing defect trends and achieve a more robust and producible product.
- Instrument design are in compliance to CGMP, FDA and ISO standards.
Most common skills for electro-mechanical engineer:
- Solidworks
- Mechanical Design
- Mechanical Systems
- Windchill
- Test Results
- Test Equipment
20. Boiler Technician
How boiler technician uses Mechanical Systems:
- Wire panels, install conduit, replace fixtures and some PLC experience.
- Help the HVAC install roof top units and replace fans, motors, compressors.
- Perform preventive and corrective maintenance on blowers, pumps, valves, and compressors.
Most common skills for boiler technician:
- Steam Boilers
- HVAC
- Hand Tools
- Mechanical Systems
- Plumbing
- Preventive Maintenance
Other skills
- MATLAB career
- MEP career
- MLS career
- MM career
- MOS career
- MRI career
- MRP career
- MSHA career
- MSW career
- Mac career
- Machine Learning career
- Machine Operation career
- Machine Operators career
- Machine Shop career
- Machine Tools career
- Macro career
- Magnetic Resonance Imaging career
- Mail Delivery career
- Mail Room career
- Mainframe career
- Maintenance Manuals career
- Maintenance Procedures career
- Maintenance Tasks career
- Make-Up career
- Makeup career
- Management career
- Management Services career
- Management System career
- Manual Labor career
- Manual Lathes career
- Manual Test Cases career
- Market Analysis career
- Market Research career
- Market Share Growth career
- Market Trends career
- Marketing Campaigns career
- Marketing Collateral career
- Mask career
- Master Data career
- Materials Management career
- Math career
- Mathematics career
- Mathematics Curriculum career
- Maya career
- Meal Prep career
- Meal Preparation career
- Meal Service career
- Mechanical Assembly career
- Mechanical Design career
- Mechanical Engineering career
- Mechanical Equipment career
- Mechanical Problems career
Updated December 28, 2023