Welder jobs in Columbus, IN - 73 jobs

POSITION OVERVIEW: The Welder Setup Operator is responsible for welding production orders or components using MIG and TIG processes to meet customer and quality specifications. This involves using training or knowledge of welding techniques, knowledge of set-up requirements and meeting established production requirements on a consistent basis. PRIMARY ACCOUNTABILITIES: Read previously prepared setup sheets and routing package for individual parts. Determines what tooling is needed and where it is located. Follows established set-up requirements and ensures settings are correct. Receives approval on setup pieces as required. Operates machine to run production and perform quality inspections as required by the written Quality Procedures. Makes necessary adjustments during production runs to stay in tolerances. May use templates, fixtures, surface plate, calipers, snap gauges, or other inspection tools to measure welded components, bead size, or other necessary dimensions per blueprint. Watches for presence of burn through, cold starts, lack of penetration, bead size, or other indications of suspect welds. Complete records of production including scrap or rework reasons. Move parts to the subsequent operation with pallet jack. Assists Group leader in writing new or changing existing Setup Sheets. May assist Engineering in developing new processes and trying out new tooling. Participate in the corrective action process to prevent defects from recurring. Follow procedures consistently to obtain repeatability. Participate in team meetings seeking continuous improvements for the operation. Observe all safety and OSHA procedures and standards. Maximum lifting of 25lb without assistance. PPE is required at times. Ability to read tape measurements. Ability to read manual calipers. Understanding decimals preferred. Ability to read and understand blueprints Job Requirements: Must maintain certification on all welding methods required by NGP or our Customers. Must have demonstrated mechanical aptitude, proficiency in shop math (fractions, decimals, metric), ability to read and follow specific routing instructions, ability to read and understand setup instructions, ability to read blueprints, proficiency in the use of appropriate measuring instruments (tape measure, dial calipers), ability to check quality of parts against templates. Must pass the NGP Weld Test. Must have demonstrated ability to handle production requirements and demonstrated problem solving ability from previous work. Must have the ability to stand for 8-hour shift or longer. Able to bend, twist, stoop to remove parts from baskets and lift to work area. Able to load parts into work area and complete baskets without damaging the part. Good hand and eye coordination. Must have hand tools necessary to inspect parts and adjust machines. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities The contractor will not discharge or in any other manner discriminate against employees or applicants because they have inquired about, discussed, or disclosed their own pay or the pay of another employee or applicant. However, employees who have access to the compensation information of other employees or applicants as a part of their essential job functions cannot disclose the pay of other employees or applicants to individuals who do not otherwise have access to compensation information, unless the disclosure is (a) in response to a formal complaint or charge, (b) in furtherance of an investigation, proceeding, hearing, or action, including an investigation conducted by the employer, or (c) consistent with the contractor's legal duty to furnish information. 41 CFR 60-1.35(c) Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights notice from the Department of Labor.

Job DescriptionDescription: Weld Machine Operator---- Responsible for running various welders and other machines efficiently, inspecting parts, and keeping work areas organized and clean. Adequately moves finished parts from work center using pallet jack to appropriate location. Effectively assists in setting up work centers following work instructions and company processes/procedures. Accurately performs and follows all general machine Total Preventive Maintenance (TPM) programs. Assists and provides effective and efficient training to other associates. Efficiently operate welders and other machines at or above the determined rate set by management. Proficiently sets up jobs and checks welders for proper settings (current, squeeze, hold, etc). Carefully inspects parts using calipers, micrometers, gages, force testers, etc., and records results in the appropriate system. Accurately recognizes visual defects on part. Fluent on Plex system keeping entries accurate and true (work center status). Adequately completes rate sheets and submits them in a timely manner. Thoroughly cleans work area by putting all items in appropriate locations. Successfully completes Pay for Skills and Training Within Industry (TWI) programs. Based on company needs a flexible work schedule and/or overtime is needed. ***Tools and Equipment Used: Pallet Jack Part Lifter Plex Calipers, micrometers, indicators, gages, force testers Plasma cutter Tool Boards **Work Ethic Responsibilities: **ETHICS: E**nthusiasm, * T eamwork, H onesty, I *ntegrity, * C *haracter and * S *elf-Motivated **Absenteeism/tardiness: ** Is conscientious in being at work when scheduled and on time. Perform the highest possible amount of quality work in the least or standard amount of time. Follow documented processes and procedures. **Quality: ** Do good quality work the first time, avoiding rework. Make good quality decisions as it relates to the job functions. Exhibit problem-solving skills. **Safety :** Be knowledgeable of and adhere to all safety rules and regulations. Always be conscious of the safety implications of one's actions; consistently observe safety regulations and wear the required safety equipment. Do not jeopardize one's own safety or others in any way. Wear appropriate personal protective equipment (PPE) in all designated areas assigned by the company. Immediately report all near misses, safety concerns, and accidents. Safely and efficiently use any assigned equipment. **Lean: ** Participate in and support lean manufacturing programs and principles with a focus to reduce costs with quality products such as Total Productive Maintenance (TPM), Suggestion System, etc. Actively participate in Continuous Improvement to continually strive to improve our processes and procedures. Adhere to 5S: Sort, Set in Order, Shine, Standardize, Sustain. **Environmental: ** Employee is responsible for complying and supporting any environmental policies and programs put in place by Batesville Tool & Die, Inc. (BTD). Employee may not bring any environmentally hazardous substances or compounds into BTD and is always conscious of the impact on the environment. Support and adhere to Technical Specification (TS) and International Organization for Standardization (ISO) activities and procedures. **Other: **Perform any other duties as assigned with enthusiasm and without complaint. ***Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. The employee is continually required to stand, sit, walk, use hands to fingers, handle or touch and run the work center while focused on the required task. The employee is frequently required to walk, sit, reach above shoulders, and talk and/or hear. The employee is occasionally required to reach above shoulders, stoop, kneel, crouch, or crawl. The employee will also be required to frequently lift up to 40 pounds and occasionally lift up to 60 pounds. Please note that these physical demands are based on a typical workday. Physical demands may vary based on the task assigned that day. ***Environmental Conditions While performing the duties of this job, the employee is occasionally exposed to wet, humid conditions and moving mechanical parts. These environmental conditions are based on a typical work day. Conditions may vary based on the task assigned that day. ***Protective clothing/equipment required: Safety glasses Sturdy leather shoe/boot or steel-toed tennis shoe Hearing Protection You should be proficient in: Machine Setups for Production Runs Mechanical Troubleshooting Skills Excellent Communication Skills Machines & technologies you'll use: Stamping Press (Minster, Aida) Requirements:

Job Description Job Opportunity: Pipe Welder Pay: $36 per hour Are you an experienced Pipe Welder looking to take the next step in your career? Join our team in Cincinnati! Key Responsibilities: Read and interpret blueprints Perform high-quality TIG and Stick welding on steel pipe Work independently and collaboratively within a team Ensure compliance with safety standards Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience Strong blueprint reading skills Mechanical and industrial experience Ability to work overtime when required If you're ready to contribute your skills and grow with us, apply today! Job Type: Full-time Pay: $36 per hour Benefits: 401(k) Dental insurance Health insurance Life insurance Paid time off Vision insurance Schedule: 10 hour shift 8 hour shift Monday to Friday Overtime Weekends as needed Ability to Commute: Indianapolis, Indiana, United States (Required) Work Location: In person

Job Description We're looking for an experienced **MIG Welder/Fitter ** to join our manufacturing team. This role involves fabricating and assembling sheet metal components to precise engineering specifications. You'll interpret blueprints, perform MIG welding on various metals, and ensure high-quality, visually sound weldments. Key Responsibilities Perform MIG welding on mild and stainless steel components. Set up and adjust welding equipment based on job requirements. Read and interpret blueprints, weld symbols, and specifications. Conduct fitting, alignment, and layout for assemblies. Inspect welds for size, quality, and appearance; repair as needed. Grind, buff, or finish surfaces to meet cosmetic and structural standards. Operate safely under Lockout/Tagout and other shop safety procedures. Work independently or in a small team to meet production goals. Skills and Qualifications 1-2 years of MIG welding or metal fabrication experience preferred. Strong ability to read mechanical drawings and measure accurately. Proficient with flux core, shielded wire, and spray transfer methods. Knowledge of torch cutting, arc gouging, and basic fitting. Familiarity with AWS charts, steel tables, and welding symbols. Ability to use standard tools (clamps, gauges, tape measure, etc.). Basic math skills, including decimal-to-fraction conversion. Effective communication and teamwork skills. Adherence to all safety and quality requirements. Work Environment Industrial shop environment with exposure to heat, noise, and metalworking conditions. PPE such as welding helmets, gloves, and protective clothing required. Safety awareness and compliance are essential. Technical Proficiency MIG welding setup and operation for production. Blueprint reading and weld inspection. Safe use of grinders, torches, and fabrication tools. Salary info: $28 - $28 / hr

This is where your work makes a difference. At Baxter, we believe every person-regardless of who they are or where they are from-deserves a chance to live a healthy life. It was our founding belief in 1931 and continues to be our guiding principle. We are redefining healthcare delivery to make a greater impact today, tomorrow, and beyond. Our Baxter colleagues are united by our Mission to Save and Sustain Lives. Together, our community is driven by a culture of courage, trust, and collaboration. Every individual is empowered to take ownership and make a meaningful impact. We strive for efficient and effective operations, and we hold each other accountable for delivering exceptional results. Here, you will find more than just a job-you will find purpose and pride. Your Role at Baxter This is where my hands make life-sustaining products You are driven by the knowledge that the products you help make saves and sustain lives. You can move quickly, address questions, and encourage teammates, all while getting quality products out on time. You are calm, positive, and a key part of a fast-paced environment that emphasizes camaraderie and teamwork. As a Welder, you are happiest when you are moving, and we will not disappoint! Baxter is known for its speed and high-quality product. Our manufacturing operations are around-the-clock to meet the needs of our customers. Our high-caliber talent works through the challenges at hand while pushing toward meeting client order needs. Different shift assignments allow for flexibility and safety. Your Team Baxter is focused on saving and sustaining lives by manufacturing high-quality products. We strive to create quality products for our customers each day. Delivering life-saving products is about getting them right, and attention to detail is how we make sure we meet that challenge. We are a team that supports each other throughout each shift. Working together in a supportive and open culture makes our processes evolve for the better and engages our workforce. You'll be offered extensive training, and the tight-knit working environment within the Manufacturing team means employees get additional training from their direct manager and peers when needed. What You'll Be Doing Check during assembly for proper weld location and size, proper fit, and operation of sliding or rotating parts. Make repairs when necessary. Check for weld spatter, burn-thru, and other visible weld defects and remove or repair when necessary. May require use of oxyacetylene or plasma arc cutting torches or automatic programmable welder. Check completed work per job instructions and print specifications. Properly set and adjust all welding parameters to maintain quality welds. Also load and assist in welding wire (spool) changes. Perform all job set-ups, rework on painted parts and finished products and must be willing to perform all other operations in the department. Perform minor repairs and preventative maintenance of welding equipment and fixtures. May be required to record measurements. Clean and change torch tips and nozzles, and clean conducts or lines with solvent as required. Clean or change helmet lenses as necessary. Report labor. Move completed parts to designated areas. Move stock to and from workstations, stock racks and holding areas. May be required to rack and un-rack parts. Responsible for schedule adherence, safety, housekeeping, rejects, and productivity applicable per Standard Operation Procedures (SOP's). Responsible for both quality and quantity of work: Participate in team activities and problem solving sessions as required. Communicate problems and/or solutions to appropriate team member. Must follow processes and procedures as written. As needed, document and/or chart production data to aid in problem identification, quality feedback and production scheduling. Troubleshoot problems and repair when necessary. Train, instruct and assist other operators in their duties as required.to ensure quality product and smooth flow. Evaluate defective material and tooling, faulty operations, questionable conditions and potential work stoppages. Advise and recommend alternatives to appropriate person. (May require the use of computer and telecommunication device.) Ensure that work area and equipment are maintained in a clean, orderly and safe condition. Follow prescribed safety regulations. The above description covers the most significant duties performed but does not exclude other occasional work assignments not mentioned. The inclusion of which would be in conformity with the factor degrees assigned to this job. What You'll Bring Must Pass Weld test Successfully complete GMAW School preferred High School Diploma or (GED) General Education Degree (applies to anyone hired after 1997). We understand compensation is an important factor as you consider the next step in your career. At Baxter, we are committed to equitable pay for all our employees, and we strive to be more transparent with our pay practices. To that end, this position has a pay rate of $22.27 an hour. US Benefits at Baxter (except for Puerto Rico) This is where your well-being matters. Baxter offers comprehensive compensation and benefits packages for eligible roles. Our health and well-being benefits include medical and dental coverage that start on day one, as well as insurance coverage for basic life, accident, short-term and long-term disability, and business travel accident insurance. Financial and retirement benefits include the Employee Stock Purchase Plan (ESPP), with the ability to purchase company stock at a discount, and the 401(k) Retirement Savings Plan (RSP), with options for employee contributions and company matching. We also offer Flexible Spending Accounts, educational assistance programs, and time-off benefits such as paid holidays, paid time off ranging from 20 to 35 days based on length of service, family and medical leaves of absence, and paid parental leave. Additional benefits include commuting benefits, the Employee Discount Program, the Employee Assistance Program (EAP), and childcare benefits. Join us and enjoy the competitive compensation and benefits we offer to our employees. For additional information regarding Baxter US Benefits, please speak with your recruiter or visit our Benefits site: Benefits | Baxter Equal Employment Opportunity Baxter is an equal opportunity employer. Baxter evaluates qualified applicants without regard to race, color, religion, gender, national origin, age, sexual orientation, gender identity or expression, protected veteran status, disability/handicap status or any other legally protected characteristic. Know Your Rights: Workplace Discrimination is Illegal Reasonable Accommodations Baxter is committed to working with and providing reasonable accommodations to individuals with disabilities globally. If, because of a medical condition or disability, you need a reasonable accommodation for any part of the application or interview process, please click on the link here and let us know the nature of your request along with your contact information. Recruitment Fraud Notice Baxter has discovered incidents of employment scams, where fraudulent parties pose as Baxter employees, recruiters, or other agents, and engage with online job seekers in an attempt to steal personal and/or financial information. To learn how you can protect yourself, review our Recruitment Fraud Notice.

Job DescriptionJob Title: TIG Welder - Thin Gauge Stainless Steel (1st Shift) Shift: 1st Shift | Monday-Friday, 7:00 AM - 3:30 PM Pay: $22.00 - $30.00+ per hour (based on experience) About the Role:We are seeking highly skilled TIG Welders & Fabricators with a refined touch and experience working with thin gauge stainless steel (14-18 gauge). The ideal candidate will have a showpiece-quality weld style and be able to deliver both precision and consistency. This is a full-time, 1st shift position on the east side of Indianapolis.This is not production welding - it's craftsmanship. If you're from the racing or custom fabrication industries, you'll likely thrive in this environment. Attention to detail and the ability to work cleanly and accurately with thin stainless is essential - there's no room for burn-throughs here.Key Responsibilities: TIG weld thin gauge stainless steel (14g-18g) with consistent quality and minimal distortion Fabricate custom components from blueprints, sketches, or CAD drawings Maintain a clean, organized work area and take pride in producing visually appealing welds Use a variety of hand tools, grinders, brakes, and shears as needed for fabrication Inspect completed welds for structural integrity and visual appearance Collaborate with team members to meet production goals and design specifications Qualifications: Minimum 3 years of TIG welding experience, specifically with thin gauge stainless steel Proven ability to produce cosmetically clean, high-quality welds Strong fabrication and blueprint reading skills Experience in custom, motorsport, racing, or high-end metalwork preferred Must be dependable, detail-oriented, and safety-conscious High school diploma or equivalent; welding certifications a plus but not required Why Join Us: Competitive pay based on experience ($22-$30+/hour) Regular day shift - no nights or weekends Opportunity to work on custom, high-end fabrication Supportive team environment focused on craftsmanship and quality #talroofrranklin

Job Description Why Join Us At Phoenix Fabricators and Erectors, we believe that success comes from hard work, teamwork, and growth. Our work is challenging and rewarding, giving you the opportunity to take on exciting projects, solve complex problems, and see the real impact of your efforts. Whether you're in the field or the office, you'll be part of a team that values ambition, skill, and dedication where your contributions are recognized, and your career can thrive. Company Overview Phoenix Fabricators and Erectors, LLC (“Phoenix”), founded in 1986 and headquartered in Avon, Indiana, is one of the nation's leading construction companies in elevated water towers and storage containers. Phoenix has constructed over 5,000 elevated water storage tanks throughout the United States as well as several foreign countries. By employing our own field crews, Phoenix offers a turnkey operation through engineering, fabrication, foundation installation, field erection, field coating, and maintenance. Phoenix maintains the industry's highest-rated safety standards and safe working environment, earning numerous “Tank of the Year” awards from the Steel Tank Institute/Steel Plate Fabricators Association, American Water Works Association, and Tnemec Industrial Coatings. Primary Duties & Responsibilities Work under a Shop Supervisor and collaborate with shop team members Follow all safety procedures and maintain positive work habits Interpret blueprints, sketches, and technical specifications Use basic math skills to calculate dimensions and weights Inspect materials before and after welding Perform final inspection on completed welds Operate an Oxy/Acetylene torch Weld using GMAW, FCAW, and SMAW processes in various positions Grind and gouge metal for extended periods when required Operate overhead bridge cranes to move materials Apply rigging techniques using key plates, bull pins, keys, shims, lifting lugs, nuts, U-bars, etc. Ensure weldments meet AWS D1.1 and AWWA D100 standards Compensation Competitive hourly wages based on experience and qualifications Overtime eligibility Benefits 401(k) and 401(k) matching Health, dental, vision, and life insurance Health savings account Schedule Full-time Monday to Friday In-person work location Requirements Required High school diploma or equivalent At least 2 years of welding experience Ability to weld using FCAW and GMAW processes Capable of passing weld tests in horizontal and vertical positions per ASME Section IX Ability to produce X-ray quality welds in production Working knowledge of all aspects of the welding industry Reliable transportation Willingness to work 40+ hours per week Demonstrated safe and positive work habits Preferred 1 year of stainless steel or aluminum welding experience

A 3rd Shift Welder for Bastian Solutions will be responsible for general welding/fitting producing weldments for material equipment projects. The main emphasis for this position is welding/fitting, other duties to include fabrication, assembly, and painting of projects as well as general repair and maintenance of Bastian Solutions shop equipment. A Welder will be responsible for maintaining tolerances and dimensions specified by individual print. A Welder I will have 1-2 years of experience in the welding/fitting field. .Job Functions: * With guidance ability to build high quality welded parts from blueprints with low rejection rate. Must maintain tolerances detailed on blueprints * With guidance works from sketches/drawings to produce parts from sheet metal, plate, bar stock, and aluminum * Keep workspace in a neat and organized order * Show mutual respect for coworkers * Show up to work every day on time. Sunday to Thurs 10:30 pm to 7 am * Maintain a positive attitude * Overtime required when necessary * Follow safety protocols per JSA (Job Safety Analysis) Preferred Skills and Required Qualifications: * Relevant welding experience required. MIG welding is preferred * Positive attitude, able to handle tense situations that arise * Team player, able to take direction * General knowledge of fabrication equipment including horizontal saws, lathes, mills, & drill presses * Onsite weld test given prior to employment to establish skill set * Minimum High School or GED diploma Travel Requirements: * No travel is required for this role. To learn more about us, click the following link - ******************************************* About Bastian Solutions: Bastian Solutions, a Toyota Advanced Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: * Health, Dental, and Vision Insurance * 401(k) Retirement Plan with a company match * Vacation/Holiday Pay * Tuition Reimbursement * Flexible Work Schedules * Volunteer Work * Professional Associations, Conferences and Subscriptions * Company Meetings & Events Bastian Solutions does not work outside recruiting agencies. No solicitation phone calls please.

Job Description We are looking for a skilled and experienced welder to join our team. The ideal candidate will have experience in Mig/Stik and 3G. We can certify. A strong background in welding techniques, a keen eye for detail, and a commitment to quality workmanship. Responsibilities: Read and interpret blueprints, schematics, and welding symbols. Fabricate and assemble metal components as per project specifications. Inspect welds for accuracy and structural integrity. Maintain welding equipment and ensure a safe working environment. Work independently and as part of a team to meet project deadlines. Requirements: Proven experience as a welder Certification in welding is preferrred by not necessary as we will certify Ability to read and interpret technical documents and blueprints. Strong attention to detail and quality control. Physical stamina to work in various conditions. Knowledge of safety protocols and procedures. Minutemen Staffing provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state, or local laws.

←Back to all jobs at George E. Booth Co. Pipe Welder George E. Booth Co. is an EEO Employer - M/F/Disability/Protected Veteran Status George E. Booth Co. is an EEO Employer - M/F/Disability/Protected Veteran Status George E. Booth Co., Inc is a family-owned and operated industrial automation sales company looking to hire their next full-time Pipe Welder. Visit our website: *************** to learn more about our family-owned and operated company. About the Role We are seeking skilled pipe welders to join our fabrication team in building high-quality process piping systems and skid packages. This role requires strong pipe welding ability (TIG & MIG) along with the versatility to handle both pipe and structural fabrication. If you take pride in laying in a clean root and producing code-quality welds, this is the place for you. Responsibilities Perform high-quality TIG and MIG welding on stainless and carbon steel pipe, tubing, and structural materials. Lay in open-root welds and perform multi-pass welds to meet project and code requirements. Fabricate and weld piping assemblies, skids, and structural frames according to project specifications. Read and interpret piping isometrics, fabrication drawings, and welding symbols. Fit, align, and tack pipe and structural components to ensure proper fit-up before welding. Execute welds that meet ASME B31.3 and shop quality standards. Operate fabrication tools and equipment for cutting, grinding, prepping, and finishing. Conduct inspections to ensure welds meet quality, safety, and visual standards. Maintain tools, welding machines, and shop equipment in safe working order. Requirements Proven experience as a pipe welder (process piping, industrial systems, or skid fabrication). Ability to pass a weld test (3G required - 6G a plus). Strong proficiency in TIG, Stick, and MIG on stainless and carbon steel. Familiarity with ASME codes, weld procedures, and quality standards. Ability to read piping drawings and fabrication blueprints. High School Diploma or equivalent required; technical training a plus. Welding certifications (TIG & MIG) are highly preferred. Must be able to stand for long periods, work overtime when needed, and lift/move materials as required. Must be willing to travel locally with a clean driving record. All candidates must be legally authorized to work in the United States. What We Provide All necessary tools and equipment for welding and fabrication. Competitive pay, PTO, benefits and matching 401K. A safe and supportive work environment with opportunities for skill development. Please visit our careers page to see more job opportunities.

Ducting Solutions: Located in Franklin, Indiana, Airtomic Ducting Solutions is a growing ducting aerospace solutions provider. Our dynamic team works closely together to support our customers and ensure the success of our business. We focus on providing our employees with opportunities to learn and grow. We provide our customers with best in class service. We strive to understand our customers, market and product to maximize our results. Position Summary: The Welder/Fabricator Level One is a key member of the manufacturing team in a high mix, lower volume environment, reporting to the Shop Floor Supervisor. Airtomic is an FAA Repair Station. This position performs all required welding and fabricating operations of all aircraft engine components as defined in the engineering process routing. Read and understand routing instructions are critical to ensure product safety. This position is entry level in the production process. The ideal candidate enjoys problem solving, working in a fast-paced environment and self-directed. Key Position Responsibilities: · Acts proactively supporting safety at all times. Safety is ALWAYS first · Position is up tempo and very detail oriented · Interpret routings, op sheets and draw on personal knowledge to determine most efficient approach to repair a given part · Polishing and basic blending of product · Cutting / prepping parts for welding · Cold work tubes, ducts & manifolds to conform to check fixtures · TIG weld or torch braze thin wall tubes, or tubular products, ducts and manifolds to aerospace quality standards · Experience in TIG welding titanium, stainless steel, and nickel alloys. · Fabrication and blueprint reading experience. · Experience with tight tolerance components. · Must have the ability to work with precision hand measuring equipment. · Experience in setting up work in jigs and fixtures. · Ability to read blueprints, drawings, testing and assembly procedures. · Willing and able to work overtime · Operate an Orbital Weld machine · Identify potential process improvements · Clean and pressure test product as assigned · Bead blast product as needed · Ensures products adhere to quality standards · Ability to recognize and solve practical problems or issues · Ability to adapt, communicate, be decisive, be dependable, and take initiative. · Ability to communicate and interact with coworkers · Ensure hazardous materials are properly labeled, stored, and handled for proper disposal. · As required, performs work assignments as directed Required qualification / Education / and/or Experience: · High school diploma, GED or equivalent · Valid driver's license · Attendance and punctuality at work are essential functions of this position · Ability to organize priorities, daily tasks and complete actions on time, in a fast-paced environment. · Strong work ethic and leadership ability · Must be able to provide proof of legal ability to work in the United States · Must be able to read, write and speak English · Must be able to pass FAA drug screen and background check · Experience welding thin wall (.030-.070”) stainless steel or nickel alloys · Ability to certify to NADCAP requirements (AWS D17.1) for stainless steel on all required joint types · Ability to certify as a (CWI) Certified Weld Inspector (AWS QC1, B5.2) · Experience in or ability to be trained as a torch brazer · Experience in Aerospace welding or thin metalworking · Applies basic math and blueprint interpretation skills Physical Demands: · Light to moderate physical effort required. · Must be able to lift up to 25 lbs. · Regularly required to sit or stand, reach, and move about the facility Preferred Qualifications: · Aerospace / Defense industry experience a plus · FAA A&P certificate is a strong plus · Current or prior AWS D17.1 certification a plus · Read and interpret blueprints and approved technical data · Experience working in a manufacturing facility · Experience working with hand tools Travel - 0% Reporting to this Position: N/A Relationships: · Reports to Shop Floor Supervisor · Daily interaction with all levels within RBC Bearings and customers Beneficial Qualifications, Skills and Experience: · Learning Mindset · Problem Solving Skills · Good Communication Skills We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. RBC Bearings is an Equal Opportunity Employer M/F/V/H

A 3rd Shift Welder for Bastian Solutions will be responsible for general welding/fitting producing weldments for material equipment projects. The main emphasis for this position is welding/fitting, other duties to include fabrication, assembly, and painting of projects as well as general repair and maintenance of Bastian Solutions shop equipment. A Welder will be responsible for maintaining tolerances and dimensions specified by individual print. A Welder I will have 1-2 years of experience in the welding/fitting field. .Job Functions: With guidance ability to build high quality welded parts from blueprints with low rejection rate. **Must maintain tolerances detailed on blueprints With guidance works from sketches/drawings to produce parts from sheet metal, plate, bar stock, and aluminum Keep workspace in a neat and organized order Show mutual respect for coworkers Show up to work every day on time. Sunday to Thurs 10:30 pm to 7 am Maintain a positive attitude Overtime required when necessary Follow safety protocols per JSA (Job Safety Analysis) Preferred Skills and Required Qualifications: Relevant welding experience required. MIG welding is preferred Positive attitude, able to handle tense situations that arise Team player, able to take direction General knowledge of fabrication equipment including horizontal saws, lathes, mills, & drill presses Onsite weld test given prior to employment to establish skill set Minimum High School or GED diploma Travel Requirements: No travel is required for this role. To learn more about us, click the following link - ******************************************* About Bastian Solutions: Bastian Solutions, a Toyota Advanced Logistics company, is an independent material handling and robotics system integrator providing automated solutions for distribution, manufacturing, and order fulfillment centers around the world. Our team specializes in consulting, system design, project management, maintenance, and installation, while sourcing the best equipment and automation technology. We take great pride in providing exceptional service and flexibility to our customers. In addition to exciting work at a growing company, we offer the following benefits: Health, Dental, and Vision Insurance 401(k) Retirement Plan with a company match Vacation/Holiday Pay Tuition Reimbursement Flexible Work Schedules Volunteer Work Professional Associations, Conferences and Subscriptions Company Meetings & Events Bastian Solutions does not work outside recruiting agencies. No solicitation phone calls please.

Why Lionshead? We seek employees who understand and buy-in to our culture, share our values, and want to improve their lives through meaningful work. How do we accomplish this? Lionshead is committed to putting our employees first, creating an outstanding work environment and providing generous compensation and benefits to our people. Long-term commitment - Lionshead is investing over 35 million dollars in our people, products and processes. We are committed to becoming the premier employer in Indiana. Innovation - We believe in leading, not following. Lionshead is first to market with cutting edge technology and creatively strategic in our financial and operational decisions. We currently are hiring for our day shift. This shift offers a great balance of work and family time. Employees on days work Monday to Thursday from 6:00 am to 4:30 pm and depending on the workload, we work our overtime on Fridays. Lionshead Precision Metals (previously IMC Corp) is seeking a qualified candidate that can come in and hit the door running. Some general job duties for this position include but are not limited to: Minimum requirements Must be able to demonstrate TIG welding with various types of materials and thicknesses. Must have knowledge blueprints and AWS weld symbols. Must be able to problem solve as needed. Must be able to follow work instructions. Must be able to perform quality checks on parts. Must be familiar with basic safety operations on the TIG welder. Ensure conformance to specifications Measure and mark work pieces using calipers, micrometer or other gauges. Collaborate with team leaders and supervisors to ensure smooth work operations Maintain safety guidelines and regulations to ensure a risk-free work environment Organize and clean equipment on a regular basis Must demonstrate their skills using GTAW and GMAW on standard joints. The three joints tested are butt, lap, and t-joints. This will be done on .030 Stainless, .030 Steel, and .060 Aluminum. These tests will be kept for 6 months after completion. Base compensation will be determined based on previous experience. Extraordinary Benefits: BRAND NEW State of the Art Facility in Greenwood! Lion Cub Benefit: Any Lionshead employee who has a baby during their employment, is eligible for a $250 gift certificate: 3 weeks paid Vacation. Annual flu shots Training and Mentoring Programs Health, Dental, Vision Plans: After 90 days, employees are eligible to join these plans for themselves and their families. 401K: After 30 days Vacation Program: Vacation Accrual (Year 1): After 3 months → 40 hours After 6 months → +40 hours (80 total) After 9 months → +40 hours (120 total) After First Year: Every January 1st → 120 hours After 5-Year Anniversary: January 1st following your 5-year anniversary → 160 hours Job Type: Full-time Schedule: 10 hour shifts Monday-Thursday 6:00 am - 4:30 pm

CMS Mechanical is looking for Journeyman Welders with pay up to $38 to start! CMS Mechanical self-performs work in both the commercial and industrial sectors, including scopes of work related to the provision, installation, and service of heating, ventilating, and air-conditioning (HVAC) systems, process piping/systems, and energy systems. The latter includes electrical generation and co-generation systems, and all related peripheral elements required to deliver fully functional systems to our customers. Requirements MUST be able to TIG, Stick, and perform X-ray quality welds Operate equipment and use safe work habits Weld components on flat, vertical, or overhead positions Ignite torches or start power supplies and strike arcs by touching electrodes to metals being welded, completing electrical circuits. Clamp, hold, tack-weld, heat-bend, grind, or bolt component parts to obtain required configurations and positions for welding Detect faulty operation of equipment or defective materials and notify supervisors Operate manual or semi-automatic welding equipment to fuse metal segments using processes such as gas tungsten arc, gas metal arc, flux cored arc, plasma arc, shielded metal arc, resistance welding, and submerged arc welding Monitor the fitting, burning, and welding processes to avoid overheating of parts or warping, shrinking, distortion, or expansion of material Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications Recognize, set up, and operate hand and power tools common to the welding trade, such as shielded metal arc and gas metal arc welding equipment Lay out, position, align, and secure parts and assemblies prior to assembly using straightedges, combination squares, calipers, and rulers Other duties as assigned CMS offers competitive pay along with a benefit package including Health, Vision and Dental Insurance, AFLAC, 401K with company match, Paid Time Off, Life Insurance, and Paid Holidays

Job Description Ducting Solutions: Located in Franklin, Indiana, Airtomic Ducting Solutions is a growing ducting aerospace solutions provider. Our dynamic team works closely together to support our customers and ensure the success of our business. We focus on providing our employees with opportunities to learn and grow. We provide our customers with best in class service. We strive to understand our customers, market and product to maximize our results. Position Summary: The Welder/Fabricator Level One is a key member of the manufacturing team in a high mix, lower volume environment, reporting to the Shop Floor Supervisor. Airtomic is an FAA Repair Station. This position performs all required welding and fabricating operations of all aircraft engine components as defined in the engineering process routing. Read and understand routing instructions are critical to ensure product safety. This position is entry level in the production process. The ideal candidate enjoys problem solving, working in a fast-paced environment and self-directed. Key Position Responsibilities: · Acts proactively supporting safety at all times. Safety is ALWAYS first · Position is up tempo and very detail oriented · Interpret routings, op sheets and draw on personal knowledge to determine most efficient approach to repair a given part · Polishing and basic blending of product · Cutting / prepping parts for welding · Cold work tubes, ducts & manifolds to conform to check fixtures · TIG weld or torch braze thin wall tubes, or tubular products, ducts and manifolds to aerospace quality standards · Experience in TIG welding titanium, stainless steel, and nickel alloys. · Fabrication and blueprint reading experience. · Experience with tight tolerance components. · Must have the ability to work with precision hand measuring equipment. · Experience in setting up work in jigs and fixtures. · Ability to read blueprints, drawings, testing and assembly procedures. · Willing and able to work overtime · Operate an Orbital Weld machine · Identify potential process improvements · Clean and pressure test product as assigned · Bead blast product as needed · Ensures products adhere to quality standards · Ability to recognize and solve practical problems or issues · Ability to adapt, communicate, be decisive, be dependable, and take initiative. · Ability to communicate and interact with coworkers · Ensure hazardous materials are properly labeled, stored, and handled for proper disposal. · As required, performs work assignments as directed Required qualification / Education / and/or Experience: · High school diploma, GED or equivalent · Valid driver's license · Attendance and punctuality at work are essential functions of this position · Ability to organize priorities, daily tasks and complete actions on time, in a fast-paced environment. · Strong work ethic and leadership ability · Must be able to provide proof of legal ability to work in the United States · Must be able to read, write and speak English · Must be able to pass FAA drug screen and background check · Experience welding thin wall (.030-.070”) stainless steel or nickel alloys · Ability to certify to NADCAP requirements (AWS D17.1) for stainless steel on all required joint types · Ability to certify as a (CWI) Certified Weld Inspector (AWS QC1, B5.2) · Experience in or ability to be trained as a torch brazer · Experience in Aerospace welding or thin metalworking · Applies basic math and blueprint interpretation skills Physical Demands: · Light to moderate physical effort required. · Must be able to lift up to 25 lbs. · Regularly required to sit or stand, reach, and move about the facility Preferred Qualifications: · Aerospace / Defense industry experience a plus · FAA A&P certificate is a strong plus · Current or prior AWS D17.1 certification a plus · Read and interpret blueprints and approved technical data · Experience working in a manufacturing facility · Experience working with hand tools Travel - 0% Reporting to this Position: N/A Relationships: · Reports to Shop Floor Supervisor · Daily interaction with all levels within RBC Bearings and customers Beneficial Qualifications, Skills and Experience: · Learning Mindset · Problem Solving Skills · Good Communication Skills We offer competitive compensation and excellent benefits including Medical, Dental, and company matched 401k plan. RBC Bearings is an Equal Opportunity Employer M/F/V/H

Welder (MIG/TIG/Stick) Shift: 1st Shift | Monday-Friday, 7:00am-3:45pm Pay: $20/hr+ Depending on experience Type: Temp-to-Hire Pro Resources is currently hiring a Welder for a long-standing metal manufacturing company in Indianapolis. This is a great opportunity to join a stable, growing team that has been in business since 1954. With approximately 30 employees, this facility offers a hands-on, team-focused environment and strong potential for long-term employment. Job Responsibilities: Perform MIG, TIG, and Stick welding on various metal components Read and interpret blueprints, weld symbols, and fabrication drawings Fit, prep, and weld materials according to specifications Inspect welds and ensure all completed work meets quality standards Operate fabrication tools such as grinders, saws, and cutting torches Maintain a clean and safe work area and follow all safety procedures Schedule & Overtime: Monday-Friday, 7:00am-3:45pm Expected overtime: approximately 10 hours weekly Typical Saturday overtime: 4-5 hours Requirements: Previous welding experience (MIG/TIG/Stick) required Ability to read and understand blueprints and weld symbols HS Diploma or GED preferred Felonies considered on a case-by-case basis with client approval Ability to lift, move, and position materials as needed Additional Information: Temp-to-hire opportunity with strong long-term potential Uniforms provided upon direct hire Weekly pay and full benefits available through Pro Resources If you're an experienced welder looking for a dependable, full-time opportunity, apply today to get started. #Indy

Ecobat is seeking individuals with mechanical aptitude and stick welding experience to join our Maintenance department. Ecobat is a leader in the collection, recycling and production of energy storage solutions, lead and polypropylene products, and other commodities essential to modern life. I. Position Description Provides operations and production support through preventative maintenance, troubleshooting, repairs, and installation. ESSENTIAL DUTIES AND RESPONSIBILITIES * Performs corrective and preventative mechanical maintenance. * Troubleshoots, repairs, and maintains mechanical equipment and systems using schematics, drawings, and other technical documentation. * Performs mechanical installation of new plant equipment. * Repairs processing equipment such as pumps, piping, and machinery components. * Performs steel fabrications, repairs, and modifications. * Keeps work area neat, clean, and free of debris. * Instruct, implement, and enforce the company safety program and site-specific safety requirements. * Complies with all environmental, health, safety, and housekeeping programs. * Performs other duties, as assigned by supervisor and/or higher classifications. II. Qualifications A. PRE-HIRE REQUIREMENTS * 2-3 years' recent industrial or related experience in millwright, industrial maintenance, or machine repair work. * Ability to pass S.M.A.W welding test. * Knowledge of various metal properties. * Ability to read schematics and blueprints. * Ability to complete assigned work in a safe manner. * Ability to safely demonstrate shop and hand tool operation. * Ability to utilize computer operating systems. * Good verbal and written communication skills. * Average leadership skills, work ethic and problem solving. * Able to work any shift, overtime, and rotating weekends. B. POST-HIRE TRAINING * Environmental training applicable to the job * Safety training for applicable equipment * Job instructional training * Quality system familiarization * ISO 14001 awareness, objectives and targets, department significant environmental impacts * OHSAS 18001 Awareness, OH&S-MS Objectives and Goals, Hazard Identification, Risk Assessment and Risk Control III. Physical Requirements & Work Environment A. PHYSICAL REQUIREMENTS While performing the duties of this job, the employee is regularly required to stand, walk; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; and talk or hear. The employee is occasionally required to sit and stoop, kneel, crouch, or crawl. The employee must regularly lift and/or move up to 10 pounds and occasionally lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. B. WORK ENVIRONMENT While performing the duties of this job, the employee regularly works near moving mechanical parts and is regularly exposed to toxic or caustic chemicals and risk of electrical shock. The employee occasionally works in outside weather conditions and is occasionally exposed to fumes or airborne particles and extreme heat. The noise level in the work environment is usually moderate. Must be able to wear Personal Protective Equipment. * If duties require entry to an arsenic or cadmium-controlled area, appropriate respiratory protection must be worn. Respiratory Protection Required: Yes [ X ] No [ ] Potential for Lead Exposure over PEL: Yes [ X ] No [ ] Potential for Inorganic Arsenic Exposure over PEL: Yes [ X ] No [ ] Potential for Cadmium Exposure over PEL: Yes [ X ] No [ ] Physical Demands of job are: Light Duty: [ ] Normal Duty: [ ] Heavy Duty: [ X ] IV. Disclaimer A. EQUAL OPPORTUNITY EMPLOYER Ecobat Resources is an Equal Opportunity Employer. Qualified applicants receive consideration for employment without discrimination because of race, color, religion, sex, age, national origin, ancestry, marital status, sexual orientation, disability, handicap or Veteran status, including disabled and Vietnam era veterans.

Job Description Fabrication/ Welder opportunity for qualified candidate that can work well with metals, including mig,tig, some stick and aluminum welding. Small shop environment with variety of general duties. Monday through Friday day shift. Competitive wages with health, vision and dental, 401K and vacation. please submit experience and qualifications. We can interview through the week or on Saturday if convenient.

Job Title: Pipe Welder Pay: $32 - $34 per hour (DOE) Hours: 40-50 per week We are seeking an experienced Pipe Welder to join our team in Indianapolis, IN. The ideal candidate will have strong welding skills, mechanical aptitude, and the ability to work independently as well as collaboratively within a team. Key Responsibilities: Read and interpret blueprints accurately. Perform high-quality TIG and Stick welding on steel pipe. Work independently and collaboratively within a team environment. Ensure compliance with all safety standards and company policies. Qualifications: Minimum of 2 years of verifiable TIG and Stick welding experience. Strong blueprint reading skills. Mechanical and industrial experience. Must have OSHA 10 certification. Ability to work overtime when required. Must pass a pre-employment drug screen. Job Type: Full-time Schedule: 8-10 hour shifts, Monday to Friday Overtime and weekends as needed Work Location: In person, Indianapolis, IN