Welder jobs in Mount Lebanon, PA - 83 jobs

Welder (FCAW & GTAW) Holtec International is seeking highly skilled Welders proficient in Flux-Cored Arc Welding (FCAW) and Gas Tungsten Arc Welding (GTAW) to support the fabrication of critical components for the nuclear, energy, and heavy industrial sectors. Ideal candidates will have hands-on experience in multiple welding positions and processes and a strong commitment to quality, safety, and precision in a heavy-plate manufacturing environment. The Welder is responsible for performing high-quality welds on carbon steel and stainless steel using a variety of welding processes including FCAW in horizontal, vertical, and overhead positions, as well as GTAW. This position involves the setup and operation of automatic, semi-automatic, and manual welding equipment. Welders are expected to follow technical drawings and specifications to ensure that all work meets Holtec's rigorous quality standards. Minimum required qualifications include: High School diploma or GED required. Minimum of 2-4 years of welding experience in a heavy plate manufacturing or industrial environment. Ability to perform and pass FCAW weld tests in 2G and 3G positions is required. Demonstrated proficiency with FCAW and GTAW on carbon and stainless steel. Ability to read and interpret blueprints, weld symbols, and technical documentation. Working knowledge of AWS standards and industry best practices. Additional desirable qualifications: Previous certification to ASME Section IX and/or AWS D1.1/D1.6. Experience in nuclear or high-spec industrial fabrication environments. Multi-process welding experience (e.g., SMAW, GMAW, SAW) is a plus. Familiarity with digital weld documentation and inspection tools. Specific Areas of Responsibility: Perform all work in a safe manner in compliance with Holtec's safety policies and wear appropriate personal protective equipment (PPE) at all times. Prepare, position, align, and fit materials for welding based on engineering drawings, work orders, and WPS (Weld Procedure Specifications). Execute welding operations in all required positions, ensuring high-quality welds that meet visual and X-ray inspection standards. Use tools of measurement and layout techniques to confirm part dimensions and tolerances. Layout, tack weld, heat-bend, clamp, grind, and bolt components to ensure accurate preparation and alignment prior to welding. Monitor the fitting, burning, and welding process to avoid material distortion or overheating. Visually inspect welds for defects, ensuring adherence to AWS and Holtec quality standards. Operate a range of welding equipment (manual, semi-automatic, and automatic), including GTAW, FCAW, SAW, and plasma arc. Safely handle materials and parts using overhead cranes, forklifts, and other material handling equipment. Maintain a clean, safe, and organized work area in compliance with housekeeping and safety standards. *Must pass pre-employment weld tests administered in accordance with Holtec's WPS requirements. May be required to work overtime, nights, weekends, or travel based on production needs. As a technology trailblazer and a prominent innovator in clean energy (nuclear and solar) industry, Holtec strives to foster a meritocratic work environment conducive to continuous learning and professional growth of its associates. Holtec is an equal opportunity employer with a long-standing commitment to social equity and environmental justice. The company gives special preference to disabled veterans as a part of its recruitment policy. Detailed information on the Company can be obtained by consulting the website: holtecinternational.com. Candidates interested in considering a career at the Company should submit their resume' along with at least three references.

Safe Fleet a leader in the truck equipment manufacturing industry, is looking for an Fabricator/Welder to work as part of a team fabricating, installing and repairing Automated Tarp Systems. We are looking for a mechanical Fabricator/Welder. This full-time position is responsible for on premises tarp system fabricating, repair and installation for the trucking industry. The qualified candidate must be a high energy, physical individual with experience working on triaxle truck bodies and semi-trailers in a fast paced, labor intensive environment. This individual will need to be motivated by a competitive industry and be results, detail and team-oriented. ESSENTIAL DUTIES AND RESPONSIBILITIES: Fabricates steel and other metal parts as indicated by the work order and blueprints. Maneuver fabrication machines, such as grinders, drill presses, brakes, rolls, shears, and flame cutters to cut, grind, and adjust material. Sets up and operates gas welding machines to weld metal parts according to work orders, blueprint layouts and verbal instructions. Regulates flow of gases for proper mixture. Cleans parts to remove contamination prior to welding Set up and operates all phases of brazing applications using clamps, fixtures and torches working to specified tolerances. Selects proper flux Sets up and operates stick welding machines to repair, join or fabricate parts working with blueprints, sketches or verbal instructions. Read a tape measure, use hand tools and semi automatic manufacturing equipment. COMPETENCIES: Must be detail oriented and eager to work Must be able to balance numerous tasks with efficiency tolerance for stress and resiliency Flexibility while having a respect for adherence to processes Quick and accurate thinker...problem solver with a sense of urgency Mechanical aptitude QUALIFICATIONS: Manual dexterity Able to learn on the fly Demonstrated ability to work professionally and productively with peers on production floor EDUCATION AND/OR EXPERIENCE: High school education or equivalent 1 year of welding experience preferred Certification preferred but not required PHYSICAL DEMANDS: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must frequently lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, peripheral vision, and depth perception. While performing the duties of this job, the employee is regularly required to use hands and reach with hands and arms. The employee is frequently required to stand; walk; stoop, kneel, crouch, bend, or twist, and talk or hear. WORK ENVIRONMENT: The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. While performing the duties of this job, the employee is regularly exposed to work near moving mechanical parts. Working environment is a climate-controlled manufacturing/warehouse facility. The employee is occasionally exposed to fumes or airborne particles. The noise level in the work environment is occasionally loud. At Safe Fleet, you are empowered to build a career that will take you where you want to go. You'll enjoy the freedom to explore new projects, the support to think outside the box and the tools necessary to achieve personal success. We offer a comprehensive compensation package, including Medical, Dental, Vision, Paid Holidays, 401K match and much more. We're a background check and pre-hire drug screen company where allowed by law. NOTE: Safe Fleet does not discriminate in hiring or employment on the basis of race, color, religion, gender, marital status, national origin, sexual orientation, age, disability, ancestry veteran status or any other status protected by law.

Belong. Believe. Be You. Belden. Propel your career surrounded by a diverse team of innovative, goal-oriented individuals who are pursuing the next generation of connectivity solutions. At Belden, you'll participate in work that will challenge you and position you to excel. You'll collaborate with colleagues from around the world, gaining exposure to a broad base of expertise and perspectives. Together, we'll continue on a journey of innovation, creating a connected world and paving the way for automation. Join us and let's build the future. Job Summary: We are seeking a skilled and reliable Welder to join our team. The successful candidate will be responsible for assembling and welding various metal components and structures in accordance with blueprints, technical drawings, and specifications. This role is essential to producing high-quality custom cabinets for various industrial and commercial applications. Responsibilities: Follow all safety procedures and wear appropriate PPE at all times. Read and interpret engineering drawings, blueprints, and welding specifications. Set up and operate welding equipment (MIG, TIG, Stick, etc.) Inspect welds and finishedproducts for quality and accuracy. Operate grinders, saws, and other fabrication equipment as needed. Maintain welding tools and equipment in good working condition. Required Skills and Experience Ability to work independently or as a team member with a positive attitude Able to follow instructions both written and verbal Ability to read mechanical drawings High school diploma or GED; technical training or certification in welding preferred 2+ years of welding experience in a fabrication or manufacturing environment. Proficient in MIG and TIG welding (knowledge of Stick welding is a plus). Understanding of metal types and thicknesses. Ability to read and interpret technical drawings. Familiarity math (fractions, decimals, measurements). Let's Write the Next 100 Years Together. Join a global community striving to improve connectivity and security. The work we're doing puts our people on the front lines of impacting lives and shaping the future. Propel your story of innovation by helping Belden write the next chapter in ours. Shape your future at Belden. These statements are intended to describe the general nature and level of work involved for this job. It is not an exhaustive list of all responsibilities, duties and skills required of this job.

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Job DescriptionSalary: $24-30 per hour Welder/Fitter Chemco Systems is seeking an experienced fitter/welder for the production of custom fabricated tanks and equipment. Responsibilities/Requirements: Blueprint reading a must Individual needs to be self-motivated, conscientious, hard-working and reliable. Great benefits including health care, paid holidays, vacation, and 401K. Salary ranging from $24.00 - $30.00 per hour based on skill level. Employee Benefits: Chemco Systems offers a variety of employee perks, which are bundled into an employee benefits package including all of the following listed below. End of year performance-based bonus Health Insurance Annual Dental & Vision allowance Life Insurance Competitive PTO Paid Holidays 401K/Retirement Planning with 401K matching up to a certain percentage. Flexible Schedules Paternity Leave Continued education and professional development Equal Opportunity Employer: Chemco Systems, L.P. is an Equal Opportunity Employer committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to sex, race, color, age, national origin, religion, physical and mental disability, genetic information, marital status, sexual orientation, gender identity/assignment, citizenship, pregnancy or maternity, protected veteran status, or any other status prohibited by applicable national, federal, state or local law. Chemco Systems promotes a drug-free workplace.

Looking to get your foot in the door in Oil & Gas? Join a company where safety always comes first. As a Welder Helper, you'll work alongside experienced welders, keeping tools and materials ready, preparing pipe for welding, and ensuring the jobsite is safe and organized. Why you'll love this job: Competitive pay with steady, full-time hours Benefits package: Medical, Dental, Vision, Life & Disability, Paid Time Off & 401(k) with company match Monday-Friday schedule (Saturdays as needed) Hands-on experience and training in a skilled trade Your Day to Day: Stock, clean, and organize welding tools and supplies Set up equipment and materials for daily assignments Cut, grind, and prep pipe for welding Assist with pipe fit-up using clamps, levels, and tape measures Keep work areas safe, ventilated, and clean What we are looking for: 1+ year of welding or helper experience in Oil & Gas preferred High School Diploma/GED or equivalent experience Physically able to lift 50-100 lbs and work in all weather Team player with strong work ethic and safety-first mindset Must pass drug screening and background check 👉 Apply today and build your career with a company that builds safely. Frontier Environmental Services is a leader in infrastructure construction, site reclamation, and ongoing maintenance in the energy industry. Founded in 1992, Frontier Environmental Services is a turnkey, full-service contractor, primarily serving operations in Pennsylvania, West Virginia, and Ohio.

Full-time Description · Apply welds per AWS D1.1 Structural Welding Code - Steel and or PTTI weldment standards and WPS. · Layout and fabricate materials according to engineered drawings, sketches, written work instructions and verbal instructions. · Do minor repairs to welding equipment and burning equipment. · Use engineered drawings, sketches, written work instructions and verbal instructions to layout tanks, tank assemblies, covers, cover parts, conservator, and conservator parts, side frames and end guides. · Hand burn and grind. Layout and shoot studs per engineered drawings. · Check work per drawings. Pick up and move material/parts. · Remove material from storeroom and complete the draw card. · Keep weld/fabrication cell clean, neat, and safe always. · Carry out other duties assigned by supervisors. Must be able to work steady 2nd shift. ________________________________________________________________ Tools and equipment: Welding equipment, burning equipment, remote overhead cranes, jib cranes, manlifts, forklifts, chippers, grinders, needle scalers, manlifts, ladders, tape measures, scribes, squares, levels, punches, hammers, sledgehammers, pliers, wrenches, screwdrivers, wire brushes, chipping hammers, jigs, dyes and penetrant. ________________________________________________________________ Personal Protective equipment: Safety glasses, leather steel toed work boots, welding gloves, burning gloves, welding hood, burning shield, flame retardant clothing, fall protection, respirator, work gloves, hearing protection. ________________________________________________________________ Physical demands and work environment: The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential job functions. Physical demands: While performing the duties of this job, the employee will be required to stand for periods of time, sit for periods of time, kneel for periods of time, crouch or crawl, balance, stoop, use arms, fingers and hands, talk, listen. Be able to climb ladders. The employee must occasionally lift and or move up to 60 pounds. Specific vision requirements must be met to perform the position of welder/fitter. Welder/fitters shall have passed an eye examination with or without corrective lenses to prove near vision acuity of Jaeger J-2 at a distance of 12-17 inches. With an eye exam repeated every three years. Work environment: While performing the duties of welder/fitter the employee will be exposed to welding smoke, welding fumes, grinding dust, U.V. and I.R. light, heat, penetrating sounds, and elevated decibel levels, hot sparks and spatter, and molten steel. ________________________________________________________________ Education: GED or High School diploma, Vocational Training in Welding. ______________________________________________________ Requirements Education: High School or GED, Must pass welding tests. Salary Description $23.20-$24.20

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR 0Lg2a0kVfz

Job DescriptionPosition: MIG Welder (Temporary) Type: Temp Position Only - Approx. 3 - weeks Schedule: Monday - Friday: 7 am - 3:30 pm Pay: $18.00 - $20.00 / hour Integrative Staffing Group is hiring temporary Mig Welders in Leetsdale, PA. As a Mig welder, you must be able to work efficiently on your own and weld 16-gauge galvanized tack and stud material. Requirements: As an experienced MIG Welder you will perform the following: Completion of projects from start to finish Comprehensively understand blueprints, lay out straight and effective welding according to drawings. Use 16-gauge to complete welds, and use overlaying techniques Qualifications: Read and interpret blueprints Own your own welding gear We are an equal opportunity employer.Contact Sue Ellen for more information: 412-264-4140 ext 217 or strella@isgwork.com

Calgon Carbon | A Kuraray Company is growing - and so can your career. Be part of a global leader in environmental solutions, where your work directly impacts the quality of air and water around the world. Welder I Excellent Benefits: Medical, dental, prescription & vision, HSA & retirement savings (401k) - Generous Company Match! Perks: Incentives/bonus plans, competitive pay, dress for your day, hybrid schedules, paid time off (vacation starting at 3 weeks), tuition reimbursement, wellness programs, fun events, learning & development opportunities. Hours of work: Mondays - Fridays, 40 Hrs/Wk - 3 shift operation An entry level position under the supervision of the E&A supervisor or group leader, the Welder I will perform all functions under this job description. This includes all necessary functions to maintain a clean and safe shop. The Welder I will comply with all Company and Safety Policies and procedures in the performance of assigned duties. The Welder I performs tack welding and finish welding of piping systems utilizing both SMAW, FCAW, and GMAW welding procedures. Certification to CCC procedures is required. The Welder I welds vessels and structural components utilizing SMAW, FCAW, and GMAW welding processes. Performs these procedures to meet CCC certified procedures. The Welder I inspects own work to ensure compliance to drawings and weld procedures and makes necessary repairs. The Welder I will operate Fork trucks, jib cranes and overhead crane after training. The Welder I assist in other areas of the plan as assigned. Duties and Responsibilities (not limited to) Complying with company policy Material handling/movement Welding Qualifications High school diploma or general education degree (GED) is required Associates degree (A.A.), or equivalent from two-year college or technical school is preferred 2-3 years welding experience is required ASME code welding is preferred About Calgon Carbon At Calgon Carbon, we are scientific innovators with a proud legacy of over 80 years and more than 205 patents to our name. Since pioneering the first activated carbon products from bituminous coal in the 1940s, we've been at the forefront of developing cutting-edge technologies and solutions to meet the world's evolving air and water purification needs. Today, our portfolio includes more than 700 direct market applications across a wide range of industries. Headquartered in Pittsburgh, Pennsylvania, Calgon Carbon employs approximately 1,685 professionals and operates 20 facilities worldwide dedicated to manufacturing, reactivation, innovation, and equipment fabrication. In Europe, we operate under the name Chemviron. In March 2018, Calgon Carbon became part of the Kuraray Group. Together, we offer complementary products and services, united by a shared commitment to delivering the highest quality and most innovative activated carbon solutions to customers around the globe. Calgon Carbon is an Equal Opportunity Employer, including disabled/veteran

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work. Prepare materials for welding, fit the components, and perform welding process per drawing specification. Weld components in all positions consistent with quality requirements. Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols. Monitor the fitting, burning, and welding process to avoid overheating of parts. Use tools of measurement for checking dimensions of parts, work to tolerances. Visually examine welds for quality. Operate hand and power tools common to the welding trade. Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment. Maintain work area in safe, clean, and orderly condition. Operate various types of automatic, semi-automatic or manual welding equipment to join metal segments using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and submerged arc welding. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Minimum and Preferred Qualifications: High school degree or equivalent required. Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.) Ability to read blueprints and transfer blueprint information to material. Minimum of 2-4 years welding in heavy plate manufacturing required. **MUST pass 2G and 3G FCAW weld tests

Belong. Believe. Be You. Belden. Propel your career surrounded by a diverse team of innovative, goal-oriented individuals who are pursuing the next generation of connectivity solutions. At Belden, you'll participate in work that will challenge you and position you to excel. You'll collaborate with colleagues from around the world, gaining exposure to a broad base of expertise and perspectives. Together, we'll continue on a journey of innovation, creating a connected world and paving the way for automation. Join us and let's build the future. Job Summary: We are seeking a skilled and reliable Welder to join our team. The successful candidate will be responsible for assembling and welding various metal components and structures in accordance with blueprints, technical drawings, and specifications. This role is essential to producing high-quality custom cabinets for various industrial and commercial applications. Responsibilities: Follow all safety procedures and wear appropriate PPE at all times. Read and interpret engineering drawings, blueprints, and welding specifications. Set up and operate welding equipment (MIG, TIG, Stick, etc.) Inspect welds and finishedproducts for quality and accuracy. Operate grinders, saws, and other fabrication equipment as needed. Maintain welding tools and equipment in good working condition. Required Skills and Experience Ability to work independently or as a team member with a positive attitude Able to follow instructions both written and verbal Ability to read mechanical drawings High school diploma or GED; technical training or certification in welding preferred 2+ years of welding experience in a fabrication or manufacturing environment. Proficient in MIG and TIG welding (knowledge of Stick welding is a plus). Understanding of metal types and thicknesses. Ability to read and interpret technical drawings. Familiarity math (fractions, decimals, measurements). Let's Write the Next 100 Years Together. Join a global community striving to improve connectivity and security. The work we're doing puts our people on the front lines of impacting lives and shaping the future. Propel your story of innovation by helping Belden write the next chapter in ours. Shape your future at Belden. These statements are intended to describe the general nature and level of work involved for this job. It is not an exhaustive list of all responsibilities, duties and skills required of this job.

JENNMAR Services, a well-respected industrial construction/maintenance company, is currently seeking Experienced Millwrights, Welders and Fabricators for Travel Work. Quality and service are the core principles of our company and we prioritize excellent relationships with our clients. **THESE POSITIONS ARE BOTH FULL TIME TRAVEL POSITIONS WITH COMPETITIVE PAY, BENEFITS AND PERDIEM AND LOCAL POSITIONS** **MUST BE ABLE TO TRAVEL EACH WEEK TO VARIOUS LOCATIONS** Benefits for Experienced Millwrights, Welders, Fabricators: Perdiem/hotel Health, Dental, Vision Paid Time Off 401(k) with matching after 6 months Job Responsibilities for Experienced Millwrights, Welders, Fabricators: Follow instructions from supervisors and/or crew foremen while maintaining all safety standards Perform various physical duties assigned Move, secure, install, build, load and/or unload materials, tools and equipment Welding and fabrication for repairs and install of plant equipment, chutes and crushers Properly repair and install mechanical parts for equipment Read schematics and instruction manuals to make equipment repairs if needed Stick Weld and use Oxy/Act torches safely and efficiently Use hand tools and power tools safely and efficiently Clean/prepare job site Assist skilled tradespeople in their duties Properly, efficiently and safely apply types of oils and greases according to specification of equipment/job Job Requirements Experienced Millwrights, Welders, Fabricators: Must be 18 or older Ability to routinely climb stairs, ladders and/or platforms, bend and squat Ability to walk, stand or sit for prolonged periods of time Ability to consistently lift and/or move up to 50 pounds throughout the shift Able to work any shifts, including overtime, weekends and holidays required. Ability to pass background and drug & alcohol testing required. MSHA Surface and Underground certifications a plus JENNMAR Services, our employees are our most important assets and is committed to them with competitive pay and a comprehensive benefits plan, including 401(k). We are consistently employing individuals in the Coal, Oil & Gas, Construction, Manufacturing and Industrial industries.

Job Description Looking to get your foot in the door in Oil & Gas? Join a company where safety always comes first. As a Welder Helper, you'll work alongside experienced welders, keeping tools and materials ready, preparing pipe for welding, and ensuring the jobsite is safe and organized. Why you'll love this job: Competitive pay with steady, full-time hours Benefits package: Medical, Dental, Vision, Life & Disability, Paid Time Off & 401(k) with company match Monday-Friday schedule (Saturdays as needed) Hands-on experience and training in a skilled trade Your Day to Day: Stock, clean, and organize welding tools and supplies Set up equipment and materials for daily assignments Cut, grind, and prep pipe for welding Assist with pipe fit-up using clamps, levels, and tape measures Keep work areas safe, ventilated, and clean What we are looking for: 1+ year of welding or helper experience in Oil & Gas preferred High School Diploma/GED or equivalent experience Physically able to lift 50-100 lbs and work in all weather Team player with strong work ethic and safety-first mindset Must pass drug screening and background check 👉 Apply today and build your career with a company that builds safely. Frontier Environmental Services is a leader in infrastructure construction, site reclamation, and ongoing maintenance in the energy industry. Founded in 1992, Frontier Environmental Services is a turnkey, full-service contractor, primarily serving operations in Pennsylvania, West Virginia, and Ohio. Powered by JazzHR tf C65lB3C7

Job DescriptionDescription: · Apply welds per AWS D1.1 Structural Welding Code - Steel and or PTTI weldment standards and WPS. · Layout and fabricate materials according to engineered drawings, sketches, written work instructions and verbal instructions. · Do minor repairs to welding equipment and burning equipment. · Use engineered drawings, sketches, written work instructions and verbal instructions to layout tanks, tank assemblies, covers, cover parts, conservator, and conservator parts, side frames and end guides. · Hand burn and grind. Layout and shoot studs per engineered drawings. · Check work per drawings. Pick up and move material/parts. · Remove material from storeroom and complete the draw card. · Keep weld/fabrication cell clean, neat, and safe always. · Carry out other duties assigned by supervisors. Must be able to work steady 2nd shift. ________________________________________________________________ Tools and equipment: Welding equipment, burning equipment, remote overhead cranes, jib cranes, manlifts, forklifts, chippers, grinders, needle scalers, manlifts, ladders, tape measures, scribes, squares, levels, punches, hammers, sledgehammers, pliers, wrenches, screwdrivers, wire brushes, chipping hammers, jigs, dyes and penetrant. ________________________________________________________________ Personal Protective equipment: Safety glasses, leather steel toed work boots, welding gloves, burning gloves, welding hood, burning shield, flame retardant clothing, fall protection, respirator, work gloves, hearing protection. ________________________________________________________________ Physical demands and work environment: The physical demands and the work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential job functions. Physical demands: While performing the duties of this job, the employee will be required to stand for periods of time, sit for periods of time, kneel for periods of time, crouch or crawl, balance, stoop, use arms, fingers and hands, talk, listen. Be able to climb ladders. The employee must occasionally lift and or move up to 60 pounds. Specific vision requirements must be met to perform the position of welder/fitter. Welder/fitters shall have passed an eye examination with or without corrective lenses to prove near vision acuity of Jaeger J-2 at a distance of 12-17 inches. With an eye exam repeated every three years. Work environment: While performing the duties of welder/fitter the employee will be exposed to welding smoke, welding fumes, grinding dust, U.V. and I.R. light, heat, penetrating sounds, and elevated decibel levels, hot sparks and spatter, and molten steel. ________________________________________________________________ Education: GED or High School diploma, Vocational Training in Welding. ______________________________________________________ Requirements: Education: High School or GED, Must pass welding tests.

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR JDtzagn1nr

Belong. Believe. Be You. Belden. Propel your career surrounded by a diverse team of innovative, goal-oriented individuals who are pursuing the next generation of connectivity solutions. At Belden, you'll participate in work that will challenge you and position you to excel. You'll collaborate with colleagues from around the world, gaining exposure to a broad base of expertise and perspectives. Together, we'll continue on a journey of innovation, creating a connected world and paving the way for automation. Join us and let's build the future. Job Summary: We are seeking a skilled and reliable Welder to join our team. The successful candidate will be responsible for assembling and welding various metal components and structures in accordance with blueprints, technical drawings, and specifications. This role is essential to producing high-quality custom cabinets for various industrial and commercial applications. Responsibilities: Follow all safety procedures and wear appropriate PPE at all times. Read and interpret engineering drawings, blueprints, and welding specifications. Set up and operate welding equipment (MIG, TIG, Stick, etc.) Inspect welds and finishedproducts for quality and accuracy. Operate grinders, saws, and other fabrication equipment as needed. Maintain welding tools and equipment in good working condition. Required Skills and Experience Ability to work independently or as a team member with a positive attitude Able to follow instructions both written and verbal Ability to read mechanical drawings High school diploma or GED; technical training or certification in welding preferred 2+ years of welding experience in a fabrication or manufacturing environment. Proficient in MIG and TIG welding (knowledge of Stick welding is a plus). Understanding of metal types and thicknesses. Ability to read and interpret technical drawings. Familiarity math (fractions, decimals, measurements). Let's Write the Next 100 Years Together. Join a global community striving to improve connectivity and security. The work we're doing puts our people on the front lines of impacting lives and shaping the future. Propel your story of innovation by helping Belden write the next chapter in ours. Shape your future at Belden. These statements are intended to describe the general nature and level of work involved for this job. It is not an exhaustive list of all responsibilities, duties and skills required of this job.

Welder Flux-Cored Arc Welding: The Welder must be qualified on multiple weld processes to include FCAW in horizontal, vertical, and overhead positions. This position will perform the highest quality of welding on carbon and stainless steel on all types of products and materials using various types of automatic, semi-automatic or manual welding equipment. (Competitive Pay + Shift Differential) Essential Job Functions: Perform work in a safe manner and follow all safety regulations including wearing all required personal protection equipment (PPE) producing high quality work. Prepare materials for welding, fit the components, and perform welding process per drawing specification. Weld components in all positions consistent with quality requirements. Layout, position, align, fit, clamp, hold, tack-weld, heat-bend, grind or bolt component parts to obtain required preparation, configuration and/or position for welding. Work from drawings, work orders, supervisor's instructions, weld procedure specifications (WPS) and Holtec standard operating procedures for welding using American Welding Society (AWS) symbols. Monitor the fitting, burning, and welding process to avoid overheating of parts. Use tools of measurement for checking dimensions of parts, work to tolerances. Visually examine welds for quality. Operate hand and power tools common to the welding trade. Handle materials as needed by hand, overhead crane, forklift, and other material handling equipment. Maintain work area in safe, clean, and orderly condition. Operate various types of automatic, semi-automatic or manual welding equipment to join metal segments using processes such as gas tungsten arc, gas metal arc, flux-cored arc, plasma arc and submerged arc welding. Physical Demands & Abilities: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions of this job. While performing the duties of this job, the associate is regularly required to talk and hear, and stand for long periods of time. The associate is frequently required to stand, walk, climb, balance, stoop, kneel, crouch, reach, push, pull, lift, grasp, feel, and use repetitive motion. The associate may be exposed to adverse environmental conditions, such as in a typical warehouse or external loading areas. This role can be physically demanding and may require the ability to lift up to fifty (50) pounds. Minimum and Preferred Qualifications: High school degree or equivalent required. Ability to perform multiple weld processes (FCAW, submerged arc) that pass visual examination and x-ray testing. (Manual welding testing requires successfully passing horizontal, vertical, and overhead position requirements.) Ability to read blueprints and transfer blueprint information to material. Minimum of 2-4 years welding in heavy plate manufacturing required. **MUST pass 2G and 3G FCAW weld tests

Job Description Phillips Tank & Structure (PTS) is no ordinary tank construction company. We specialize in the complex and fast-paced environment of tank repair on a nationwide scale. No two tanks are alike, so when they need repair, they often pose unique or complicated technical issues. Our experienced engineering staff are well-versed in API 650, API 653, AWWA D100, AWWA D103, API 12D, and other tank specifications. We build and repair welded above-ground storage tanks (ASTs), bolted tanks, and related structures. We also inspect, install, and repair tank systems such as aluminum geodesic dome covers, aluminum internal floating roofs (IFRs), IFR mechanical shoe seals, liquid level gauges, fire protection systems, silo support structures, industrial storage tanks, and heating and insulation systems. Statement of Purpose To provide satisfying, long-term work opportunities for our dedicated employees - We believe that there is pride to be gained in performing productive work, and there should be great satisfaction in achieving results as a team. Our efforts will be spent towards continuously improving the health, strength, and quality of the company. We believe our collective success will generate value that supports our families and benefits our communities. The PTS difference: Our people are our #1 priority. Teamwork is the best way to solve problems. Safety is critical. Everyone is responsible for creating a safe work environment. We strive to find new and better ways of doing things every day. Clear expectations and directions are always given. Frequent coaching and support lead to great performers and high quality for our customers. A manager's job is to set each employee up for success every day. We don't punish people for mistakes - we work together to understand the root cause of a mistake and solve it together. We strive to create an environment where you look forward to coming to work each day and leave work with a sense of pride and accomplishment. Day to Day Duties: Performing arc and torch cutting and gouging. Using generators, compressors, tuggers, blowers, grinders, and other power and air tools. Welding plate with 7018, 7024 and 6010 stick (SMAW), flux core (FCAW), and submerged arc automatic machines (3 o'clock and “goat”/tractor). Using come-alongs, hydraulic jacks, hoists, air bags, winches, and other lifting equipment. Using tank shell buggies, tank scaffolding, tank ladders, and other specialty equipment. Performing vacuum box tests, oil tests, dye penetrant tests, and other non-destructive quality examinations. Using gas monitors, fresh air kits, respirators, emergency rescue kits, and other safety equipment. Operating forklifts, man lifts, boom lifts, and other large lifting equipment. Knowledge of crane operations (including rigging and signaling) Reading detailed erection and fabrication drawings. Planning the sequence and methods of fitting up, welding, repairing, and constructing tanks. Completing job safety analysis, safety audits, site-specific training, and other safety training. Follow directions and work professionally with other crew members. \ Other duties as assigned. Requirements Have great communication and organization skills. The ability to solve problems and suggest improvements to our systems. Have excellent attendance and show up to work on time every day. The willingness to learn. Be at least 18 years old. Be able to lift 50 lbs. Have a high school diploma or equivalent. Be eligible to work in the United States. Be willing to authorize background checks. Have no criminal convictions for dishonesty, sexual misconduct, violence, or acts of terrorism. Have a valid driver's license. Be willing to authorize motor vehicle driving record checks. Be willing to submit to pre-hire, random, and post-incident drug and alcohol testing. Ability to weld is a plus. Benefits: Competitive Pay with annual reviews Health, Dental and Vision insurance 401k with company match Great culture of teamwork, learning and development. You'll be part of a team where YOU matter Powered by JazzHR 4uil16Erev