Apprentice jobs in Laramie, WY - 186 jobs

Design Mechanical, Inc. a Comfort Systems USA company In Colorado, we have two locations - Louisville, our corporate headquarters, and Breckenridge with a combined 400 employees. Locally, we are a small family environment, and nationally, as part of Comfort Systems USA, we are one the largest Mechanical Contractors with excellent benefits packages, competitive pay structures, career progression, and more. Job Title: Sheetmetal Apprentice Department: Sheetmetal Reports to: Labor Manager FLSA Status: Non-exempt (Eligible for OT) Location: Denver, CO Wage Range: $20-28/hourly Benefits Included: Comprehensive Medical, Dental, Vision, FSA/HSA, Matching 401K, Long Term Disability, Short Term Disability, Company Paid Life & Voluntary Spouse & Child Insurance, AD&D, Employee Assistance Program, PTO, Paid Holidays, voluntary additional insurances/benefits, and other great perks. : Perform entry-level general pipefitting duties as required with supervision. Progress through the trade Responsibilities: Basic math skills Trained to understand and operates all machinery Understands terminology, preps ductwork for installation, has basic hand tools as per tool list, and can properly use them Attends all Design Mechanical's Apprenticeship training classes regularly and outside schooling, if available Develops good housekeeping and safety habits Responsible for accurate material checkout from warehouse and labor accounting Attentive to following instructions and has a positive attitude toward leadman, fellow employees, and customers Can document approximately 2,000 hours of employment Perform laborer tasks including such duties as sweeping, cleaning, delivering, loading, unloading, hole cutting, etc. Other duties as assigned APPRENTICE 2 (12-24 months) $23-24/hr All Apprentice 1 responsibilities and be able to: Read non-complex blueprints, detail shop orders from prints, and onsite measurements Install HVAC systems with minor supervision Set up and operate all job-related tools safely Fabricate duct and simple fittings Understand the fundamentals of heating, ventilating, and air conditioning Flat solder copper and galvanized joints, properly water seal duct joints, and OSM joints Be willing to help solve installation problems Document approximately 4,000 hours of employment Other duties as assigned APPRENTICE 3 (24-36 months) $25-26/hr All Apprentice 1 and 2 responsibilities and: Do all types of small jobs alone with supervision including add-on air conditioning, furnace change-outs, humidifiers, air cleaners Can install all types of normal residential, commercial, and industrial HVAC systems with supervision. Able to impart trade knowledge to and lead a helper Can coordinate work with customers and other trades Can weld light gauge sheet and lightweight angle iron frames Can complete jobs successfully in terms of labor and material budgets Can document approximately 6,000 hours of employment Other duties as assigned APPRENTICE 4 (36-48 months) $27-28/hr All Apprentice 1, 2, and 3 responsibilities plus: Application for certification at local jurisdictions as required Know fundamental design and can successfully complete all jobs as per Design Mechanical's standards Can document 8,000 hours of employment Support the total quality effort. Identify and respond to the needs of internal and external customers 100% of the time Work within the guidelines of the safety and employee policy Upon graduation, obtain Denver Journeyman Heating and Ventilating Certificate Other duties as assigned Qualifications: Minimum 18 years of age High school graduate/GED Mechanical aptitude Willingness to learn through on-the-job training and technical school courses Reliable transportation to and from work required What we offer you: Career Path Development and certifications needed/required Vendor/Manufacturer Training, as well as Safety and Task Training Design Mechanical, Inc. is proud to be an Equal Opportunity Employer and provides equal employment opportunities to all employees and applicants regardless of race, color, religion, gender, gender identity, age, national origin, disability, parental or pregnancy status, marriage, and civil partnership, sexual orientation, veteran status, or any other characteristic protected by law. Reasonable accommodations will be made to meet the requirements of the Americans with Disabilities Act and will be provided as requested by candidates taking part in all aspects of the selection process. All your information will be kept confidential according to EEO guidelines. While performing the duties of this job, the employee is regularly required to: Have a full range of mobility in the upper and lower body Be able to reach overhead Be able to work a full range of physical activities in various positions, including, but not limited to, stooping, standing, bending over, kneeling and squatting, climbing, walking for extended periods of time Be able to lift, pull and push materials and equipment to complete assigned job tasks Be able to lift 70 pounds of weight frequently throughout the assigned workday Capable of hearing at a level or correctable to a level where the person can receive detailed information through verbal communication. Vision must also be at a level or correctable level where the person has clarity both in short and long-distance vision. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. While performing the duties of this job, the employee is regularly exposed to outdoor weather conditions. The noise level in the work environment is usually loud. One will be exposed to dirt, noise, temperature extremes, vibrations, dampness, equipment movement, hazards, chemicals and solvents, lightning, ice, snow, and work at night and in the dark. The person will be expected to be free from fear of heights and can work at heights on ladders and scaffolds. Some work may occur in confined spaces. This Job Description is not a complete statement of all duties and responsibilities comprising this position and may change with or without notice. Design Mechanical, Inc. is not open to third-party solicitation or resumes for our posted FTE positions. Resumes received from third-party agencies that are unsolicited will be considered complimentary.

←Back to all jobs at ETI GLOBAL Hydraulic Cylinder Rebuilder Apprentice ETI GLOBAL is an EEO Employer - M/F/Disability/Protected Veteran Status Hydraulic Cylinder Technician Responsibilities in Brief: Disassemble and inspect hydraulic cylinders. Repair cylinders as related to our business, per customer request. Test and inspect hydraulic cylinders, etc. Work in a temperature controlled environment Overview: We are looking for a good team member to be a part of a growing company. A successful applicant for this position will be highly dependable, able to follow instruction closely, and have the ability to do some heavy lifting as needed. Hand tool experience, including complete toolbox, is required. Prior experience is not necessary but is a big plus. Your own basic tools are required. This is a fast paced environment where hard work and focus are important. What We're Looking For: At Equipment Trucks Inc (ETI INC) , we are looking for an individual for the position of Hydraulic Technician. Working individually and, at times, in a team, the right individual will have a strong mechanical aptitude and background to disassemble and inspect, recommend process and parts to repair, enact these processes in a timely and efficient manner. We train and cross-train strong candidates. Responsibilities in Detail: Use measuring devices, calculators and myriad hand tools, torque tools and various other tools to service equipment Work dutifully with Service Writer and Shop Foreman to support the efficient and accurate quoting and billing of repair & service work Attends various safety certification classes and seminars as required Shop maintenance including cleaning, organizing, trash removal, and securing valuables during non-working hours Requirements: Must be able to work closely and cooperatively with management and other employees as directed. Excellent mechanical aptitude Good at math with analytical abilities Physical stamina and strength to lift heavy (up to 50lbs) items. High school diploma or equivalent; completion of vocational training or an apprenticeship will be an asset. Experience operating forklifts is a plus Hydraulic repair experience is a plus but not required. Must be capable of learning (from text or written communications) and remembering the steps/tasks to achieve similar competent repairs in the future. Why Work for ETI: ETI INC Prides itself in being a safe, fun as an employer that gives our employees a chance to grow and prides themselves on producing a quality product to ensure our customers can meet their goals. Competitive pay that grows with your ability to succeed A friendly culture that is business focused, but employee driven. We offer health insurance, dental, vision, life insurance, paid vacations, paid holidays and more. Company-sponsored trips and activities First-shift with occasional overtime Flexible hours available. Please visit our careers page to see more job opportunities.

B.H. Inc is currently seeking four motivated and skilled Year 4 Apprentice Electricians to join our Instrumentation & Electrical (I&E) division for the Riverton Hospital project. This is a full-time opportunity located in Riverton, WY, where you will be responsible for installing, connecting, testing, and maintaining commercial electrical systems. In this role, you will work within engineered specs and NEC 2023 requirements, utilizing appropriate hand and power tools to complete jobs safely and efficiently. You will report directly to the Crew Foreman and will be expected to strictly follow directions given by assigned Journeymen or other direct leadership while maintaining regular and punctual attendance. This position offers a wage range of $18.00 to $36.00 per hour depending on experience, with site specific Per Diem available for those who qualify. We also offer an extensive compensation and benefits package including health, dental, vision, 401k with match, and paid time off (PTO). The standard schedule is Monday through Friday, though Saturday work may be required based on project needs. Qualifications: * Applicants must hold a currently active Wyoming Electrical Apprentice License to be considered for this role. * Candidates must have specific experience in commercial and industrial electrical work and be proficient in following NEC 2023 requirements. * You are required to provide your own hand tools per the established BHI tool list and have a valid driver's license if operating company fleet equipment. * The role requires the ability to perform essential physical functions, including climbing, balancing, and lifting, often in extreme weather conditions exceeding 100 degrees or below 32 degrees. * You must be willing to engage in moderate to heavy travel and be available for a Monday through Friday schedule with the potential for Saturday work. At BHI, we value teammates who are honest, professional, and safety-conscious. If you are a self-driven individual who takes pride in your work and is ready to contribute to a key project like the Riverton Hospital, we look forward to reviewing your application. About B.H. Inc. For over 50 years, BHI has grown from humble beginnings to become a powerhouse in the construction industry, earning a reputation for world-class service and unwavering dedication. Our mission is to be the recognized and respected name across the building, energy, infrastructure, and mining markets, a testament to the hard work and commitment of every employee. At BHI, our core purpose is to provide personal and professional growth opportunities, blessing employees and their families through rewarding careers. We foster a team-oriented atmosphere where strong communication, integrity, and a relentless focus on safety are paramount. Every Apprentice Electrician on our team is valued, supported in their development, and encouraged to take pride in their efficient, detail-oriented work, ensuring over-the-top customer service on every project. Join a company where teamwork isn't just a word, but a way of life, driven by our commitment to build America. Ready to Light Up Your Future? If you are a driven Apprentice Electrician with a passion for quality and a desire to be part of a leading team, we invite you to explore this outstanding opportunity! Apply now through our 3-minute, mobile-friendly application! BHI is an EEO employer, including disability and vets. Applicants must be authorized to work for any employer in the United States. We are unable to sponsor or take over sponsorship of an employment Visa at this time. #INDSJ2

Join our new Industrial Manufacturing Technician Registered Apprenticeship for High School students only and gain the knowledge, skills, and abilities you need to have a successful manufacturing career! Interstates is currently seeking motivated young men and women to join our program as Production Tech Apprentices. This role will provide direct support to our Fort Collins manufacturing operations. An ideal candidate will be results driven, safety-minded, and work well with a team. Interstates' Story We meet the electrical and automation needs of companies around the world. For seventy years, we've tackled complex challenges and developed innovative solutions. We started out as a small electric company, and have evolved into an organization with over 1000 employees and multiple locations throughout the Midwest. During this evolution, the most impressive thing we have built is our team! At Interstates we treat each other like family, because the foundation of our success is our team. We have created a collaborative workplace based on trust, integrity, and support for one another. At Interstates, our success starts with your success. Primary Job Duties and Responsibilities: * Displays a positive and enthusiastic attitude * Takes the initiative to learn systems and processes * Takes a proactive approach to problem solving * Assembling pre-fabricated electrical construction material * Assembling and pre-wiring light fixtures, receptacles, and switches * Bending and threading conduit * Fabricates support structures by cutting, bending, and welding components * Other duties may be assigned Minimum Qualifications: * High school Junior or higher education level * 16 years of age * Ability to commit 20 hours/week (during school), 40+ hours/week during Summer Preferred Skills: * Excellent verbal communication * Ability to work cooperatively with others and build effective relationships * Display a positive attitude * Strong attention to detail * Be results driven and safety minded * Ability to routinely lift 50-75lbs Location & Travel: The position is located in Fort Collins, CO. Applicants must be local or willing to relocate to be considered. Accepting applications until this role has been filled.

Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: Drive tractor-trailer or escort vehicles. Material handling of heavy steel chains, blocks and steel cables, and other devices. Climbing and crawling on and under derailed railroad cars. Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding. Digging, hammering, and other physical types of work with various tools Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs. Work at heights over 25 feet on railroad cars; may be on bridges, over water, or in water. Why Join Us: Room for growth Union benefits including, but not limited to medical insurance and pension plan Take your career to the next level and join our mission-driven team! At Hulcher you can apply with confidence in knowing you will be a valued asset to our team and be a part of a stable thriving industry! Requirements What You Bring: Must have a valid Class A CDL with NO restrictions. Must have a valid driver's license. Ability to work on-call 24/7 365 days a year in an emergency response environment. Ability to travel up to 50% of the time. Ability to conduct maintenance inspections on equipment. Work Schedule: Monday through Sunday on the job or possibly at division. On call for 24 hours for derailments requiring immediate response. 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response. The Response Team is to be available at all times and all hours of the day. Salary Description $26.84/Hourly

Encore Electric, Inc. is a licensed Wyoming Electrical Contractor with long-term, consistent work in Cheyenne. Come work for a reputable contractor that will keep you busy! As a perk for working for us, we will pay for your electrical schooling and give you the opportunity to learn hands-on electrical work. OVERVIEW: An Apprentice Electrician participates in commercial electrical construction and follows direction from Journeymen. * NEW, UPDATED PAY RATES & JOB SITE INCENTIVES ADDED* - APPLY NOW TO LEARN MORE * COMPENSATION: competitive hourly wage + an additional job site incentive!!! * HOURS:50-58 hours per week, Mon-Sat (schedule subject to change) * PERKS: housing/per diem available for travelers, LONG-TERM work, job site incentive pay, paid schooling, and more! Job Description: The Apprentice Electrician participates in commercial electrical construction and service work. The electrical apprenticeship includes company paid electrical schooling and on the job training hours over 4 years. Physical Requirements: A functional physical is required to be completed an passed before work can be performed in all field positions. The physical requirements can often be completed repetitively and for extended periods of time. These requirements include. * Driving * Sitting * Climbing * Lifting, floor to chest (up to 50lbs) * Lifting, floor to waist (up to 50lbs) * Lifting, waist to overhead (up to 30lbs each arm) * Carrying (up to 50lbs) * Standing * Stooping * Vision acuity (near, far and without color deficiencies) * Walking * Kneeling * Trimming (final installation of electrical devices) * Pushing (up to 100lbs) * Pulling (up to 100lbs) Additional Requirements: High School Diploma or equivalent is required with a degree in related field is preferred. * Apprentice 2: 1,000-2,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 3: 2,000-3,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 4: 3,000-4,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 5: 4,000-5,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 6: 5,000-6,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 7: 6,000-7,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice 8: 7,000-8,000 on-the-job training hours as outlined by apprenticeship program requirements * Apprentice RTT: 8,000+ on-the-job training hours as outlined by apprenticeship program requirements Benefits: * Encore Electric provides excellent benefits for our employees, including: medical, dental, and vision plans, disability, and life insurance, employee-matched 401(k), paid time off (PTO), an employee assistance program that includes counseling, legal, and financial advice. * Encore also provides a generous employee referral program, and access to technical, safety, personal finance, and leadership training through Encore University, Encore's in house training program. * This position is eligible for a job site incentive, housing, and per diem. Applications will close on June 30, 2026 or once role has been filled. To ask any questions about the job position, please contact *****************************. To request an accommodation during the application process, please contact *********************. Encore Electric, Inc. is an EOE, including disability/vets.

Job Description Ready to take your electric career to new heights? Look no further! Black Wolf Electric in Rock Springs, WY, is seeking enthusiastic 3rd or 4th Year Electrical Apprentices to join our electrifying team of electricians. Job locations are throughout Wyoming including Rock Springs, Cody, and Cheyenne. If you're an experienced 3rd or 4th Year Electrical Apprentice who's ready to amplify your career, join us and start earning a competitive wage of $22 - $26 per hour. But that's not all! Our exceptional benefits package includes 5 paid holidays, a tool account, paid training, paid licensing, vacation, tuition reimbursement, advancement opportunities, medical, dental, vision, and supplemental insurance as well as matching 401k. We also offer this role performance bonuses on projects, paid licensing, paid training, and per diem for out-of-town overnight work! ABOUT US At Black Wolf Electric, we stand as a comprehensive electrical contractor renowned for our expertise in commercial, fire alarm, fiber, data, high voltage, and residential/commercial services. Our culture thrives on unity and support, with an open-door policy that values every voice. We prioritize work-life balance within a family-oriented framework and take pride in recognizing and advancing talent proactively. Our unique approach fosters multi-dimensional expertise, ensuring each employee becomes a master in all domains. At Black Wolf Electric, our employees experience not just a workplace, but a cohesive and enriching journey! ABOUT THIS JOB AS OUR 3RD OR 4TH YEAR ELECTRICAL APPRENTICE At Black Wolf Electric, we don't settle for ordinary - and neither should you! Embrace the buzz of a 7 AM to 5:30 PM schedule, rocking a 4-10's rhythm that keeps you charged. Your role as a 3rd or 4th Year Electrical Apprentice isn't just a job; it's an electrifying journey. Picture yourself deciphering plans, collaborating with dynamic teams, and ensuring installations that not only meet codes but radiate excellence. Each day is a fusion of precision and innovation, transforming blueprints into tangible brilliance for residential, commercial, and industrial clients. All that you need to excel as our 3rd or 4th Year Electrical Apprentice is the following: Wyoming 3rd or 4th year electrical apprentice license Experience installing various conduit and raceway types Proficiency in interpreting blueprints and technical diagrams Ability to use testing devices to identify and report electrical problems Valid driver's license and a clean driving record Willingness to travel as needed ADVANCE YOUR ELECTRIC CAREER TODAY! Join us in crafting a brighter, more electric tomorrow - take the leap and shine with Black Wolf Electric! Our quick, easy, and mobile-friendly application process means your future is just a click away. Supercharge your career - join us today! Job Posted by ApplicantPro

Jolly Roofing & Contracting Co., Inc. is a trusted leader in the commercial roofing industry, committed to safety, quality, and professional development. We are seeking motivated individuals to join our team as Roofing Apprentices and begin a long-term career in commercial roofing. Position Overview As a Roofing Apprentice, you will work alongside experienced roofing professionals to learn the installation, repair, and maintenance of commercial roofing systems. This hands-on, entry-level role focuses on single-ply roofing systems while providing exposure to metal installations, safety practices, and equipment operation. No prior roofing experience is required-training is provided. Key Responsibilities Assist experienced roofers with installation and repair of commercial roofing systems, with emphasis on EPDM, TPO, and PVC Support metal installations including coping, gutters, and edge metal Prepare and clean job sites to maintain safe, organized work areas Learn proper use of hand and power tools Assist with operation of equipment such as man lifts and forklifts under supervision Follow all safety regulations, including fall protection and OSHA requirements Handle roofing materials and tools as directed by senior technicians Work collaboratively with crew members to complete projects efficiently and to high-quality standards Qualifications Strong desire to learn commercial roofing and construction skills Ability to perform physical labor, lift materials, climb ladders, and work at heights Willingness to follow safety protocols and instructions Valid state ID or driver's license Prior roofing or construction experience is a plus, but not required Pay & Benefits Competitive pay based on experience Weekly direct deposit Healthcare insurance (eligible after 90 days of employment) 401(k) retirement plan with company match up to $500 Paid Time Off (PTO) accrued up to 40 hours per year $15,000 company-paid life insurance (eligible after 90 days of employment) Schedule Full-time Overtime and occasional weekends as needed Company Culture & Values At Jolly Roofing & Contracting, we pride ourselves on creating a supportive, team-oriented environment where apprentices can grow into skilled roofing professionals. We value safety, integrity, and excellence, and our commitment to training and mentorship provides real opportunities for career advancement. Equal Opportunity Employer Jolly Roofing & Contracting Co., Inc. is an Equal Opportunity Employer. We do not discriminate based on race, color, religion, sex, national origin, age, disability, veteran status, or any other protected characteristic under applicable law.

Job Description Polar Field Services, Inc. is looking to hire a seasonal Trades Helper to help perform construction, maintenance, and repair work on the National Science Foundation-funded facilities at Summit Station, Greenland. Do you crave international adventure? Would you like to earn an excellent paycheck while working in a beautiful, remote location? Do you want to work with a great company doing big things in the Arctic? If so, please read on! This seasonal position earns a competitive wage of $1,226 - $1,449 per week. In addition, our international Trades Helpers can enroll in our Pro Deal Discount program and receive an hourly health and welfare benefit of $4.22/hour for the first 40 hours worked each week (included in the weekly rate listed). If this sounds like the right opportunity for you to seek your fortune in new lands, apply today! ABOUT POLAR FIELD SERVICES, INC. We are a rare company. Since 1999, we've been taking our clients wherever they need to go, no matter how remote the location or challenging the conditions may be. We plan their expeditions, keep them safe in places that are anything but, and supply food, shelter, power, water, and waste removal. We then return the site to such a pristine condition no one would ever know we were there. We haven't been everywhere. Just a lot of places most people haven't. Our team is made up of skilled people who are passionate about supporting cutting-edge science and making a difference in our world. As thanks for their courage and hard work, we offer excellent compensation and outstanding benefits. We are looking to add more adventurous souls to our team! A DAY IN THE LIFE OF A GENERAL LABOR - TRADES HELPER In this seasonal position, you lend a vital helping hand to the skilled tradesmen at our international facility in the Arctic. Every day, you are ready to jump right in and tackle anything requested of you. Under the guidance of our experienced team, you assist with a variety of important tasks, including clearing snow, groundwork, and construction. Efficient and safety-conscious, you help out with any carpentry, plumbing, and electrical duties that arise. Nothing gets past you as you keep our facilities painted and insulated from the cold. Your workspace is always organized, clean, and hazard-free. Every shift brings new, exciting experiences as you drive trucks and polar vehicles out on the ice sheet. Organized and attentive to detail, you perform equipment and materials inventory checks as well as maintain accurate and thorough documentation of hours worked, tasks performed, materials used, and processes involved. No matter the weather, your disposition remains sunny and work-ethic strong. A team player, you always attend safety meetings and morning pre-task stretching sessions. You also readily assist your team with all aspects of camp support, including cooking, equipment operation, digging, and camp construction. Every day brings a new adventure, and you thrive in a new and exciting environment. You love waking up in a gorgeous new location and working with an amazing team! QUALIFICATIONS FOR A GENERAL LABOR - TRADES HELPER High school diploma OR equivalent 2+ years of experience in general construction, maintenance, or farm and trail work Valid driver's license and United States passport Willingness to work outside on various job sites in extreme weather conditions Experience with remote and cold or polar environments would be beneficial. Prior completion of accredited OSHA training courses would be a plus. Are you a team player? Can you follow directions from a variety of skilled trades workers? Are you flexible with a positive can-do attitude? Do you thrive in a fast-paced environment? Are you adaptable, especially during potentially volatile weather conditions? Can you remain friendly, courteous, and tactful, no matter the circumstance? Are you organized and efficient? Do you relate well to people from varied backgrounds? If yes, you might just be perfect for this seasonal position! WORK SCHEDULE FOR A GENERAL LABOR - TRADES HELPER This international position typically works 9-hour days, 6 days per week and enjoys Sunday off. Additional hours will occasionally be needed. The schedule can vary based on location, seasonal weather conditions, and work requirements. ARE YOU READY TO JOIN OUR INTERNATIONAL TEAM? If you feel that you would be right for this seasonal general labor job, please fill out our initial 3-minute, mobile-friendly application. We look forward to meeting you! Location: 80217 Job offers are contingent on the completion of a satisfactory background check and may include physical and dental examinations as required by the National Science Foundation. Job Posted by ApplicantPro

An Electrical Apprentice 1 is a trade apprentice who assists the experienced electrician installing the work in the basic tasks of materials handling, jobsite housekeeping, tool and equipment maintenance, simple installations and general labor. This is a safety sensitive position. Essential Duties and Responsibilities Helps in securing, relocating and organizing materials, small tools, and equipment from and back to appropriate storage areas. Keeps work area clean by collecting and disposing of scrap, excess materials, and refuse. Keeps materials and tools clean and organized in an orderly fashion. Assists in pulling wire, lifting, hoisting and positioning materials. May operate less complicated hand tools and equipment under direct supervision of a Foreman or more senior electrician. Digs trenches by use of hand tools. Assists in mounting and strapping. May assist more senior personnel in less complicated electrical installations under close supervision. Performs other project related duties and assignments as instructed by supervisor. Meets attendance standards and complies with late/absence notification procedures. DOES NOT WORK ON ENERGIZED CIRCUITS OR EQUIPMENT. Performs other related duties as assigned to ensure efficient and effective processes, completion of projects and smooth operation of department. Qualifications Education and Experience Requires basic mechanical aptitude and manual skills. Current Apprentice Electrical License High School Graduate, GED or equivalent is preferred. Skills, Knowledge, and Abilities Bend conduit by hand with hand benders. Utilize all power tools, saws, threaders, and knockout punches. Comprehend and practice safe work procedures as outlined in CEC's Safety Policy Handbook, Haz-Com Policy, and Lockout/Tagout Policy. Operate two handed tools/equipment, cable cutters, hammer drills, compression tools, and jack hammers. Read and interpret instructional manuals, work site directions, and written instructions. Install and make branch wire terminations in junction boxes and panel boards. Must be able to work occasional overtime as required. Current Driver's License. Must have reliable transportation. Work Environment The work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. May work inside or outside while wearing required personal protective equipment at all times; possible exposure to hot and cold temperatures, weather elements, dust, toxic materials, in restricted or confined spaces, and on slippery or uneven surfaces; works on ladders, scaffolds, aerial lifts, catwalks, in ditches and excavations; works in and around single and multi-story buildings with all exposures typical of a heavy construction site, including portable sanitary facilities. Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Personal weight and tools cannot exceed weight limit of ladders (Class 1-250lbs, Class 2-300lbs. Must be able to bend, stoop, squat, crawl, climb, kneel, balance, push, pull and reach over head. Lift 51 pounds, 20 times per day. Constantly move about on the feet. Climb ladders of all types. Complete full day assignments involving overhead work. Must be able to make transition from employee parking area or street into construction work areas and to access all levels of the building, even if the only means of access is by O.S.H.A. approved site construction ladder or stairs still under construction, but acceptable for use. Possess good vision, normal or corrected. Must be capable of securing tools and materials from storage areas to complete assigned tasks. Possess good hearing, normal or corrected. Must be able to positively identify different colors of wiring. Must be able to work 8 hours a day, 40 hours per week, and overtime as required and night shifts. CEC Companies is an Equal Opportunity Employer. We are committed to attracting and retaining the best-qualified individuals, regardless of race, color, religion, national origin, gender, age, disability, veteran status, or any other status protected under federal, state, or local law. All qualified applicants are encouraged to apply.

Join a company who provides a positive, challenging, and inclusive work environment within the construction industry! Nunn Construction is currently seeking individuals that are self-motivated, reliable, hardworking, and independent for several Commercial Carpenter/Carpenter Apprentice positions. At Nunn Construction, we invest in our people because it creates a working environment where we get things done - and we get them done well. We are driven by integrity, hard work, safety, and trust to maintain our legacy of quality building projects that serve our community. Nunn has comprehensive career development plans for all departments, where our employees' ambition and hard work is recognized and supported with personal and professional growth opportunities. Nunn Construction is a Construction Manager/General Contractor specializing in commercial building projects that matter to Colorado communities including Municipal, Educational, Non-Profit/Faith-Based, Healthcare, and Commercial Office projects. Our Headquarters office is in Colorado Springs with additional offices in Pueblo and Durango, Colorado. Join a company who provides a positive, challenging, and inclusive work environment within the construction industry! Nunn Construction is currently seeking individuals that are self-motivated, reliable, hardworking, and independent for several Commercial Carpenter/Carpenter Apprentice positions. At Nunn Construction, we invest in our people because it creates a working environment where we get things done - and we get them done well. We are driven by integrity, hard work, safety, and trust to maintain our legacy of quality building projects that serve our community. Nunn has comprehensive career development plans for all departments, where our employees' ambition and hard work is recognized and supported with personal and professional growth opportunities. Nunn Construction is a Construction Manager/General Contractor specializing in commercial building projects that matter to Colorado communities including Municipal, Educational, Non-Profit/Faith-Based, Healthcare, and Commercial Office projects. Our Headquarters office is in Colorado Springs with additional offices in Pueblo and Durango, Colorado. Carpenter/Carpenter Apprentice Minimum Qualifications * Must have at least 1 year of hands-on, carpentry experience * Must be able to work 40+ hours per week * Ability to use necessary hand and power tools * Must have reliable transportation to job site(s) * Must be able to regularly lift and carry items weighing approximately 50 lbs. or move up to 90 lbs., climb and work ladders, bend, stoop, and work around wood dust and fumes, in inclement weather. * Must pass pre-employment background check & drug screen Job Summary / Objectives A Carpenter/Carpenter Apprentice typically follows blueprints and building plans to meet the needs of clients. Installs structures and fixtures, such as windows and molding. Measure, cut, or shape wood, plastic, and other materials. Construct building frameworks, including walls, floors, and door frames. An experienced level Carpenter plans, constructs, installs, and maintains a wide variety of complicated woodwork structures and equipment. Selects materials to meet appearance and specified load requirements. Works from blueprints and rough sketches. Occasionally operates various types of woodworking equipment. May direct work of others. Compensation * Carpenter Apprentice/Carpenter (Carpenter Apprentices must have at least 1 year of experience).: $21-$30 -per hour, plus, potential Merit Annual Bonus Growth and Inclusion Opportunities * Field Development Program, including Carpenter Apprenticeship Program through CITC * Employee Recognition Incentive Plan * Company Events such as Annual State of the Company, Job Site Lunches, Summer Picnic, Holiday Party and Team Building Opportunities Benefits * Medical/Vision & Dental - eligible first of the month after 60 days of employment * Healthcare and Dependent Care Flexible Spending Account (FSA) - eligible first of the month after 60 days of employment * Paid Time Off (PTO) - 2 weeks per year of PTO once accrued at 1.54 hours per week, beginning at time of employment * 401(k) Retirement Savings Plan - eligible the first month after six months of employment * Short/Long Term Disability - eligible the first month after six months of employment Application Process * In order to apply, interested candidates must submit an application by clicking on the link below. Upload your resume and cover letter - labeled with 'your name and - Carpenter/Carpenter Apprentice position.' * Nunn Construction is an Equal Opportunity Employer. We consider applicants for all positions without regard to race, color, religion, creed, gender, national origin, age, disability, marital or veteran status, sexual orientation, or any other legally protected status. Apply for this position Share this job

Job DescriptionBenefits: BAS Shirts & Gear provided $1000 per month to Health Savings Account (after 90 days) Paid time off Training & development This position is responsible for always demonstrating the company values, as well as timely and accurate installation of low voltage HVAC Controls and for assisting the Project Technician with verification and the installation. Experience with low voltage wiring in construction preferred. Must be able to work independently. Great opportunity for training and advancement. The HVAC Controls Apprentice will perform the following: Installation of raceways and cabling for Low Voltage Control Systems per all applicable codes, to include metal conduit. Mounting of Controls Devices: Sensors & Relays Check/Test/Start of installed controls Time Management Daily Reporting This position is required to fulfill the company values: Integrity-Undivided in Honesty & Ethics. Quality-Our People are professional & results are consistently excellent. Value-The customer should be glad they chose us and do so again. Our customers and job sites revolve around hospitality locations in the western slope (requiring commute to these locations, not the office & must be willing to relocate to Colorado if applying from out of state & relocation financial assistance is not included). Job sites include: Breckenridge Avon Aspen And other possible resort locations in Colorado Basic Hand Tools Required (BAS does have tools available to "sign out" when needed): Screw Drivers Alan Wrenches Chanel Lock Pliers Socket Set Wrenches (SAE & Metric) Cordless Drill with bits Conduit Reamer Wire Strippers (10-24 AWG) Hack Saw

Overview WHY COOLSYS? At CoolSys, we offer more than just a job-we provide stability, growth, and industry-leading benefits for our employees. No wonder Newsweek named CoolSys one of America's Greatest Workplaces! As a large company serving diverse customers, we invest in our team with: Competitive Compensation: $18-31/hr. Ongoing Education & Training: Access to state-of-the-art facilities and paid online training. Comprehensive Benefits: Medical, Dental, Vision, and Prescription coverage, paid vacation/holidays, and a 401(K) match with 100% immediate vesting. Year-Round, Diverse Work: Stay engaged with consistent, interesting projects throughout the year, working across various industries and systems to keep learning and growing. Extra Perks: Quarterly bonus plan, tuition reimbursement, employee discounts on vehicles, hotels, theme parks, pet insurance, and more. Join us and advance your career while working with top-tier clients in the HVAC and refrigeration industry! Responsibilities The Apprentice (Refrigeration) provides support to an installation team by completing tasks in a safe, prompt, accurate, and professional manner and following customer specifications, applicable building codes and proper piping practices. Install equipment, by project requirements and under the direction of a senior technician: Refrigeration: display case drains, walk-in box drains, overhead hangers, and piping, etc. Perform all assigned work safely and responsibly. Use power and hand tools, powered vehicles, machinery, and PPE as directed and required by Source, customer, and contract policy. Escalate problems and concerns (safety, quality of work, etc. ) to on-site senior technicians or project managers promptly. Always maintain clean and professional job sites/work areas. Properly store, disassemble, or remove all spare and waste materials created on assigned job sites. Provide assistance and support to senior technician/s on a job. Carry out all responsibilities in an honest, ethical, and professional manner. Perform other duties as assigned. Installation of all types of piping including PVC, copper (brazing), copper line sets Qualifications Education or experience equivalent to a high school diploma, GED, or completion from trade program or technical school. 1+ years of experience in the construction, refrigeration, HVAC, or other related industry/trade preferred. Ability to operate a scissor lift or forklift preferred. Knowledge of job site safety, and ability to perform work by safe work practices and rules. Ability to use basic power and hand tools including drills, fuel gas tools, electrical meters, measurement tools, etc. Ability to be punctual and dependable. Ability to work in a variety of working conditions, including scaling ladders to various heights, outdoors in hot/cold temperatures, in noisy environments, etc. Ability to perform basic mathematical calculations including fractional addition/subtraction, multiplication, division, and measurements. Ability to read, write, and communicate timely, clearly, and concisely. Ability to work constructively in a team environment and follow instructions from senior technicians. Ability to understand and follow all company policies and procedures and all applicable State and Federal laws. Good driving record. Join Us Today, there are 27 different companies that make up the CoolSys family of brands. Our valued employees are at the heart of our continued growth and success. We invite you to be part of that growth! Connect with us on Facebook and X. CoolSys is an EEO/AA Employer. All qualified individuals - Including all ages, colors, disability, ethnicity, family or marital status, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socio-economic status, veteran status, and other characteristics are encouraged to apply. Pre-employment background screening (criminal and MVR for driving positions) and drug testing are required for all positions. CoolSys will consider qualified applicants with criminal histories in a manner consistent with federal law, state law, or local ordinance. Service Tech, refridgeration, HVAC, refrigeration, HVAC-R, HVAC/R, diagnostic, commercial, service, install, installer, installation, mechanical, mechanic, apprentice, AC, field service, chiller, specialist, HVACR, entry level

Job Description Commercial Apprentice Carpenter - Ayudante de Carpintero ¡HABLAMOS ESPAÑOL! Commercial experience from ground to finish. We offer competitive pay based on experience. Ofrecemos buen pago dependiendo de su experiencia! Phone: ************ Telefono: ************ Shift: Monday - Friday; 7am - 3:30pm (Horas de trabajo: Lunes - Viernes de 7am - 3:30pm) Carpenters perform a wide variety of work including: Wood Framing. (Madera) Drywall - hang and finish (Installar pared de lleso) Case Work and Trim. Stairs. (Escalones) Backing and Blocking. Doors, Frames, and Hardware (Puertas, Formas de Puertas) Requirements for Carpenters (Requisitos de Carpinteros): Minimum 1-4 years of carpentry experience. (1 ano O mas de experiencia) Reliable transportation a plus (Carro se bueno) Tools to complete tasks. (Complir Tareas) Good communication skills. (Buen Comunicacion) The ability to read blueprints is a plus. (Leer Planos es bueno) Job Posted by ApplicantPro

Our Goal at Laramie Range Ford is to create an exceptional environment for our customers and employees for the continual well-being and growth of everyone involved. We are all working together to build a stronger and better dealership and community in which to work and live. By working together in a spirit of cooperation and teamwork, our dealership will be unsurpassed for its quality, integrity, and service. WE OFFER: Pay based on experience Medical & Dental Insurance Paid Vacation Closed Sundays Great Work Environment Wonderful Culture RESPONSIBILITIES: Perform work specified on the repair order with efficiency and in accordance with dealership policies Test components and systems, using diagnostic tools and special service equipment; test drive vehicles Diagnose, maintain, and repair vehicle automotive systems Communicate directly with the Service Advisor so that customers can be informed if any additional service is needed. Complete online multi-point inspection report Execute repairs under warranty to manufacturer specifications REQUIREMENTS: Are a fast learner Have excellent written and verbal communication skills Have excellent customer service skills Are a team player Are computer literate Have a valid driver's license Laramie Range Ford is an equal opportunity employer and values diversity. All employment is decided on the basis of qualifications, work experience and business needs. We do not discriminate on the basis of race, color, religion, marital status, age, national origin, ancestry, physical or mental disability, medical condition, genetic information, gender, sexual orientation, gender identity or expression, veteran status, or any other status protected under federal, state, or local law.

Job Description SUMMARY: This position is responsible for operating and maintaining various machines, load and unload frequently heavy materials, and follow directions from supervisors and other skilled tradesmen. DUTIES AND RESPONSIBILITIES: Cleans up and maintains safe, tidy and organized work areas. Cleans up and maintains trucks and equipment, loads trucks and trailers, minimizes waste and redundancy, be proactive in recognizing and assisting on all steps of our projects, material handling. Assist as a safety ambassador, hole watch. Understands vac safety, set job site to complete projects safely and efficiently (hoses, pipes, fittings, safety equipment), operates nozzle end of vac hose and all duties that encompass that task, tear down and clean up vac projects Understands Hydro safety, protecting surfaces not to be hydro blasted/water jetted, sets up and teardown/clean up jobs (tools, hoses and equipment), maintains safe and organized work areas, operate hydro guns and tools Understands surface prep safety, masks and protects surfaces not to be blasted, pot tending (portable blasters and bulk pots), sets up jobsites including staging hoses and equipment, runs and maintains blasting hoses and equipment, solvent cleaning surfaces, pressure washing, steam cleaning, abrasive blasting, cleans up spent abrasives, cleans up and teardown and demobilization of job sites. Understands coating safety, reading and comprehending Material Data Sheets, masks and protects surfaces not to be coated, setting up equipment, setting up job sites, runs and maintains hose, pot tending, mixes coatings, assists in trowel and spray operations, cleaning up painting equipment, cleans and maintains job sites, handles waste coating materials and solvents Performs other related duties as assigned by management. SUPERVISORY RESPONSIBILITIES: This job has no supervisory responsibilities. QUALIFICATIONS: High school diploma or general education degree (GED), or one to three months related experience and/or training, or equivalent combination of education and experience. Computer skills required: None Other skills required: Ability to do physical labor and other strenuous physical tasks. Ability to work in all weather. Workers must be punctual and reliable. Must have experience as a general laborer in the construction industry. PHYSICAL DEMANDS AND WORK ENVIRONMENT: Frequently required to stand. Frequently required to walk. Occasionally required to sit. Frequently required to utilize hand and finger dexterity. Frequently required to climb, balance, bend, stoop, kneel or crawl. Frequently exposed to wet and/or humid conditions (non-weather). Frequently works near moving mechanical parts. Frequently works in high, precarious places. Frequently works around fumes, airborne particles, or toxic chemicals. Frequently exposed to outside weather conditions. Frequently exposed to extreme heat or cold (non-weather). Occasionally exposed to blood-borne and airborne pathogens or infectious materials. While performing the duties of this job, the noise level in the work environment is usually moderate; loud; very loud. The employee must occasionally lift and/or move up to 80 pounds, frequently lift and/or move up to 50 pounds / continually lift and/or move up to 10 pounds Specific vision abilities required by this job include close vision; distance vision; color vision; peripheral vision; depth perception and ability to adjust focus.

ABOUT THE TEPA COMPANIES Established in 2005 and owned by the Paskenta Band of Nomlaki Indians, The Tepa Companies deliver comprehensive and sustainable solutions to federal, state, local, and private-sector clients throughout the United States. The tribally owned companies work independently and collaboratively to provide wide-ranging construction, engineering, environmental, industrial, staffing, and technology services. When you join Tepa Companies, you have the opportunity to expand your entrepreneurial skill set while growing professionally alongside the best in the industry. You will have the opportunity to impact your team, the organization as a whole, and subsequently, our Tribe. We seek out top talent to provide the best services for our clients. We focus on being a responsible company for our employees and their families by creating a culture that reflects our core values and offering competitive pay and benefits package. Our benefits package includes comprehensive medical, dental, vision, generous paid time off and holidays, 401(k) plan with company match, life insurance, flexible spending and health savings account, mental health support and resources, short and long-term disability, and tuition reimbursement. LOCATION: This is a nationwide traveling position requiring frequent travel to project sites across the United States. Per diem will be provided. ABOUT THE JOB The Tepa Companies are seeking a Welding Apprentice who will Perform welding tasks under supervision on piping and plate within petroleum operations facilities. In addition to welding, the successful candidate must be able to assist in tasks related to welding such as fit‐up, preparation, repair, inspection, and post weld preparation. As required, the Apprentice Welder will also be tasked to assist with general site work such as loading and unloading equipment and materials, site clean‐up and preparation, mobilization, and demobilization to and from the jobsite, scaffolding erection, general tank construction tasks and other duties as assigned. This role is intended for May 2026 college graduates who majored in an applicable field. As Tepa continues to grow, we are focusing on hiring recent graduates to begin their careers at our organization with opportunities to receive hands-on learning, mentorship, and growth within the company. This is an entry-level position that does not require previous experience but does require completed education in the particular discipline. Job Functions: Follow welding procedure specifications when welding Train and assist with performing quality welds able to pass radiographic examination Train and assist with performing quality welds using various welding process, such as TIG, GMAW, SMAW, FCAW, etc. Train and assist with producing quality welds with efficiency Train to perform or assist with fit‐up and preparation of welds Perform or assist with post weld cleanup, inspection, and repair Communicate regularly with the Field Foreman regarding issues and concerns on the job site Train to determine the required tools, materials and welding methods based on the project specifications Assist with the assembly, installation, and repair of pipe components and systems according to specifications Inspect all materials, equipment, and tools required to perform the work Maintain supplies, equipment, and tools Properly prepare materials by clamping, cutting, or applying chemical solutions to piping Observe all safety regulations WHAT WE'RE LOOKING FOR High School diploma or GED Formal vocational/technical training in GTAW- Gas tungsten arc welding and basic welding processes/procedures Must be graduating in 2026 from vocational training (May/June graduates preferred) Must be able to pass a multi-position weld test utilizing the SMAW process Must be able to pass 2 and 3G plate welding tests Must be able to perform stick welds on both carbon and stainless-steel plate and pipe Must be able to utilize large weld rods (3/16" minimum) in multi-positions in an effective and efficient manner Ability to learn to read and interpret blueprints, schematics, and written instructions Must have a general knowledge of AWS, API, ANSI, and ASME codes and standards Must be able to troubleshoot and have a strong attention to detail Must have physical dexterity Must be able to follow verbal directions Must be able to read and write in English Must be willing to travel for long durations Must be able to pass a background check required to access US military installations Must have a valid driver's license Equal Opportunity Employer Veterans

We are seeking a motivated and dependable HVAC Maintenance Apprentice to join our residential service team. This entry-level role is designed for individuals who are looking to begin a long-term career in the heating, ventilation, and air conditioning (HVAC) industry. As an apprentice, you will work alongside experienced HVAC technicians to learn the ins and outs of residential system maintenance, diagnostics, and repair. This is a hands-on learning opportunity where you'll gain valuable skills, earn industry certifications, and build a foundation for career advancement. Key Responsibilities: Assist lead technicians with the inspection, maintenance, and repair of residential HVAC systems including furnaces, central air units, heat pumps, mini-splits, thermostats, and ventilation systems. Perform basic service tasks such as: Replacing air filters and belts Cleaning coils and condensate drains Checking and recording system pressures and temperatures Testing electrical connections and controls Monitoring refrigerant levels and reporting abnormalities Help document service calls, maintenance checklists, and customer communications accurately. Learn to interpret service manuals, wiring diagrams, and equipment schematics. Safely use hand tools, meters, gauges, and other diagnostic equipment. Follow all safety protocols and wear appropriate PPE at all times. Maintain cleanliness and organization of company vehicles, tools, and workspaces. Practice professional conduct when entering and working in customers' homes. Communicate clearly with team members and, when needed, assist with explaining system performance or service needs to homeowners. Attend ongoing training sessions, both in-house and offsite, to support development and certification. Qualifications: High school diploma or equivalent required. Enrollment in or recent graduation from a certified HVAC training program preferred. EPA 608 certification preferred (or ability to obtain within 90 days of hire). Valid driver's license and clean driving record. Strong work ethic and willingness to learn. Basic mechanical aptitude and interest in hands-on work. Ability to lift up to 50 lbs, work in tight spaces, and handle seasonal temperature extremes. Excellent communication and teamwork skills. Strong attention to detail and commitment to safety. Training & Development: As an HVAC Maintenance Apprentice, you'll receive structured on-the-job training and mentoring from seasoned professionals. You'll also have access to company-sponsored continuing education opportunities, including: EPA 608 Certification preparation and testing Manufacturer-specific training sessions Safety and compliance workshops (OSHA, tool use, ladder safety, etc.) HVAC troubleshooting and diagnostics courses Electrical fundamentals and airflow measurement training Career Growth Opportunities: This position offers a clear path for advancement within our organization. With time, demonstrated skill, and successful completion of required certifications, apprentices can move into more advanced roles, such as: HVAC Maintenance Technician HVAC Service Technician Installation Technician Lead Technician / Crew Lead Field Supervisor or Operations Manager Sales or System Design Consultant Specialization in smart home integration, indoor air quality, or energy efficiency We believe in promoting from within and investing in the long-term success of our team members. If you're serious about building a career in the HVAC industry, this is the place to start. Why Join Us? Competitive pay with regular reviews Tools, uniforms, and training provided Supportive team environment with skilled mentors Steady, year-round work in a growing industry Clear advancement path and promotion opportunities A chance to build a career, not just a job Apply Today and take the first step toward a rewarding and stable future in the HVAC trade Powered by JazzHR mSxncbiDDk

Job Description Job Title: Apprentice Carpenter Company: Mytikas Industries Employment Type: Full-Time, Hourly (4 days, 10-hour shifts; 40 hours/week) Reports To: Company Operations Manager Travel: Not specified Compensation: $21.00-$23.00 per hour Benefits: Not specified Job Summary The Apprentice Carpenter is an introductory role within the Carpenter category focused on learning steel framing, window installation, floor installation, and Hardi Board/siding installation for modular homes. Cross-trained across four interchangeable subcategories, the Apprentice assists with basic tasks under close supervision, develops foundational blueprint understanding, and builds safe work habits in a production environment. Essential Duties and Responsibilities Steel Framer: Learn measuring, cutting, and assembly techniques; assist with preparing and installing steel frames; build basic blueprint familiarity and safe tool use. Window Installer: Learn measuring, aligning, and sealing techniques; assist with preparing and installing windows; follow installation guidelines and safety protocols. Floor Installer: Learn measuring, cutting, and securing flooring; assist with preparation and installation; follow blueprints and safety protocols. Hardi Board/Siding Installer (Interior & Exterior): Learn measuring, cutting, and securing panels; assist with installation; follow safety protocols and maintain a clean workspace. Follow safety guidelines, including PPE use and hazard prevention. Support maintenance of tools, equipment, and a clean, safe workspace. Collaborate with team members to learn production processes and contribute to team goals. Required Qualifications Willingness to learn and follow instructions in a fast-paced production environment. Basic communication and teamwork skills; attention to detail and commitment to safety. Preferred Qualifications High school diploma or equivalent. Vocational training in carpentry, construction, or related fields. Basic exposure to carpentry, construction, or installation work. OSHA safety training or related certifications (e.g., NCCER). Work Environment / Schedule Onsite at Mytikas Industries's production facility in Florence, Colorado. Fast-paced, collaborative environment with hands-on training and mentorship; PPE required (e.g., safety glasses, gloves, hard hats). Schedule: 4 days per week, 10-hour shifts (40 hours total). What Mytikas Industries Offers Competitive hourly pay within the posted range ($21.00-$23.00/hour). Hands-on training across multiple carpentry subcategories with a pathway to Journey Carpenter based on skill development. How to Apply Scroll down to “Apply to Job.” Under “Upload Resume *”, do one of the following: Drag and drop your resume into the upload box, or Click Upload and select your file Make sure your resume file is accepted: PDF/DOC/DOCX/TXT/RTF and under 10MB. Fill out the Personal Information section (typically Full Name, Email, Phone, and optionally LinkedIn). Complete any Additional Questions (often includes an SMS consent checkbox). Click the final Apply button to submit. EEO StatementMytikas Industries is an Equal Opportunity Employer committed to diversity, inclusion, and building a strong local workforce. We consider qualified applicants without regard to legally protected characteristics.Disclaimer: Duties and responsibilities are not a comprehensive list; additional tasks may be assigned and role scope may change based on business demands.