Apprentice jobs in Minnetonka, MN - 39 jobs

Ironworker Apprentice Mortenson is currently seeking an Ironworker Apprentice that will be responsible for learning how to and assisting journeymen ironworkers in marking, positioning, and securing structural steel members to reinforce concrete or building structures. RESPONSIBILITIES * Select, clean, and install reinforcing rods as directed by journeymen * Load, transport, unload, and furnish workers with materials, tools, and equipment * Clean work area and restock supplies and materials; perform minor maintenance or cleaning of journeymen's tools and equipment * Assist in lifting, positioning, and securing materials and work pieces during installation; bend steel rods with hand tools or rod-bending machine; supply wire mesh to journeymen * Measure and mark layout for installation; weld brackets to lintels, sills, columns, and other structural framework; drill holes in metal, concrete, and masonry structures using portable power drills, air-hammer, and/or hand tools; cut, miter, and bevel metal trim and cover plates to size; bolt, clip, weld, or solder ironwork together and to brackets or anchors; verify level and plumbness; bolt newel posts, balusters, and other parts of stairways and stair rails to support; fasten cover plates and mold in place with metal screws * Receive and offload all major components; install loose components for nacelle, hub, and tower preparation; connect blades to hub; set base and tower sections; manage taglines; assist with main erection crane assembly and teardown * Climb ladders - average 80m * Effectively work and build relationships with those of diverse backgrounds and organizational levels * All other duties as assigned QUALIFICATIONS * High school diploma or GED * Enrolled in Apprenticeship Aptitude Program * Current driver's license * Ability to read and interpret documents such as safety regulations, operation and maintenance instructions, and procedure manuals; understand and apply basic mathematical skills (adding, subtracting, division, & multiplication). * Strong teamwork orientation; positive attitude and professional customer service skills; detail orientation; active listening skills and effective communication, including an openness to diverse input and feedback. * Repetitive hand, arm, leg movements * *Lifting, carrying, pushing, pulling: up to 50 lbs. * Please note: this position description is not intended to be a comprehensive list of the duties and responsibilities of the position. The duties and responsibilities of this position may change without notice. * Lifting, carrying, pushing, or pulling over 50 lbs will be done with assistance of another team member or equipment. A few benefits offered include: (for Non-Craft & Non-Union Craft working 25+ hours / week) * Medical and prescription drug plans that includes no additional cost vision coverage * Dental plan * 401k retirement plan with a generous Mortenson match * Paid time off, holidays, and other paid leaves * Employer paid Life, AD&D, and disability insurance * No-Cost mental health tool and concierge with extensive work-life resources * Tuition reimbursement * Adoption Assistance * Gym Membership Discount Program for CA, CO, WA, MN only The base pay range for this role is $25.35 - $48.17 per hour. (Actual range is higher for the following office locations: Denver, CO and Chicago, IL - 5%, Seattle, WA, and Portland, OR - 10%, Washington, D.C. - 12.5%). for CA, CO, WA, MN only Base pay is positioned within the range based on several factors including an individual's knowledge, skills, and experience, with consideration given to internal equity. Please make note: * Visa sponsorship is not offered for this position. * Our postings are typically open a minimum of 5 days and an average of 44 days. ABOUT MORTENSON As a top builder, developer, and EPC (Engineering, Procurement, and Construction), our expertise spans markets like sports, renewable energy, data centers, healthcare, and more. We are builders at heart, working to ensure the built environment has a lasting positive impact. Let's Redefine Possible Equal Employment Opportunity Your uniqueness brings new and creative perspectives to the team. Mortenson is committed to providing equal opportunities of employment (EOE) to all individuals, regardless of your race, religion, gender, national origin, age, veteran status, disability, marital status or any other legally protected category. Other Items to Note * Mortenson reserves the right to hire any individual without legal or financial obligation on unwanted solicitations. No agency emails, calls, or solicitations are accepted without a valid agreement. * Must be currently legally authorized to work in the U.S. without sponsorship for employment visa status (e.g., H1B status, 0-1, TN, CPT, OPT, etc.). We are unable to sponsor or take over sponsorship of an employment Visa at this time.

Tool Maker Apprentice Pay scale starts at $23/hr with incremental advances up to $33 upon completion of the program Supports manufacturing by building molds, fixtures and related tools, completing repairs and revising design specifications as needed. Essential Job Functions/Primary Responsibilities: Setup and operate Tool Room equipment as needed to build, repair, revise and service molds, fixtures and related tools in a safe and timely manner. Develop best practices and continually improve tool making skills under direction and guidance from senior Tool Makers. Other Responsibilities: Complete other projects and/or tasks as assigned to support business needs Education and Experience Required: High School Diploma or equivalent 2 years tool making experience Experience with CNC machining, both set up and operation Desired: 2-year technical degree in Machine Tool Trades/Tool and Die Experience with CAD/CAM programming Other Expectations, Skills and Abilities: Set up and operate Tool Room equipment to manufacture, repair and revise components for molds, fixtures, and related tools in a safe and timely manner Ensures tooling is manufactured to build plans that allow for proper fit and assembly to final design specifications Uses CAD/CAM technology to analyze and interpret design intent Monitors tooling resource queues utilizing MRP systems to ensure operations are completed on time Informs the appropriate stakeholders of any expected delays or potential impacts to tool performance or delivery Inspects machined components and records dimensional data Troubleshoot and repair molds (silicone & thermoplastic) More information about the Trelleborg Toolmaker Apprenticeship Program What is it? A registered apprenticeship is a time-tested employee training system that combines job-related instruction with structured on-the-job learning experiences. The program includes: 2,000 hours minimum of on-the job training 144 hours or more of related instruction per year 50+ hours of safety training per year Incremental wage increases as the apprentice gains experience Position - Toolmaker Location - this apprenticeship will be situated in our Delano, MN location, and will include external training partners within the Twin Cities Metro area. Eligibility - qualifications include a high school diploma, at least one year of manufacturing experience and a basic understanding of the Toolmaking process. Timeframe - the program is designed to include four years' worth of instruction. This time can be adjusted if a participant has applicable experience and can “test out” of certain components within the program. There is a 500-hour probationary period. Completion - upon successful completion of the program, participants will receive a Certificate of Completion and, when applicable, a Journeyworker card from the Department of Labor and Industry, Apprenticeship Unit. How to apply - complete an online application in response to our online apprenticeship posting

We're looking for people who put their innovation to work to advance our success - and their own. Join an organization that ensures a more secure world through connecting and protecting our customers with inventive electrical solutions. We are looking for a motivated and dedicated Apprentice Electrician to join our team. This is a unique opportunity to work directly with experienced electricians and grow your career while pursuing your Journeyman's Electrical License. You will be a key part of our maintenance team, responsible for ensuring the smooth operation of our facility and production equipment. What You'll Do: Master Your Trade: Partner directly with licensed electricians to perform daily troubleshooting, repairs, and preventative maintenance on our facility and production equipment. Problem-Solve: Troubleshoot and fix issues related to electrical, controls, and PLC systems. Install and Maintain: Construct and modify new and existing electrical circuits and distribution equipment, ensuring all work follows National Electrical Code (NEC) requirements. You'll also assist with the integration, start-up, and debugging of new or moved equipment. Team Up: Work with external contractors on equipment servicing and installations, and help guide other technicians in repairs and maintenance. Stay Organized: Maintain accurate documentation of all equipment repairs and modifications and assist in managing our spare parts inventory. Prioritize Safety: Follow all company safety and Lockout/Tagout (LOTO) procedures, and help identify and correct any safety hazards. Qualifications Actively pursuing an Electrician's license. Experience in electrical or mechanical maintenance is preferred. Knowledge of PLCs (Rockwell, Siemens), robotics (ABB, Fanuc), and HMI systems (Rockwell, iFix) is a plus. Familiarity with the NEC and experience reading electrical prints, including European styles. Ability to lift and carry up to 50 lbs., work at heights, and obtain a forklift and company truck driver's license. Proficient with Microsoft Office tools, especially Excel. Strong communication, organizational, and problem-solving skills. A detail-oriented team player with a strong work ethic and a focus on safety. WE HAVE: A dynamic global reach with diverse operations around the world that will stretch your abilities, provide plentiful career opportunities, and allow you to make an impact every day nVent is a leading global provider of electrical connection and protection solutions. We believe our inventive electrical solutions enable safer systems and ensure a more secure world. We design, manufacture, market, install and service high performance products and solutions that connect and protect some of the world's most sensitive equipment, buildings and critical processes. We offer a comprehensive range of systems protection and electrical connections solutions across industry-leading brands that are recognized globally for quality, reliability and innovation. Our principal office is in London and our management office in the United States is in Minneapolis. Our robust portfolio of leading electrical product brands dates back more than 100 years and includes nVent CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF and TRACHTE. Learn more at ************** Commitment to strengthen communities where our employees live and work We encourage and support the philanthropic activities of our employees worldwide Through our nVent in Action matching program, we provide funds to nonprofit and educational organizations where our employees volunteer or donate money Core values that shape our culture and drive us to deliver the best for our employees and our customers. We're known for being: Innovative & adaptable Dedicated to absolute integrity Focused on the customer first Respectful and team oriented Optimistic and energizing Accountable for performance Benefits to support the lives of our employees Pay Transparency nVent's pay scale is based on the expected range of base pay for this job and the employee's work location. Employee pay within this range will be based on a combination of factors including knowledge, skills, abilities, experience, education, and performance. Where federal, state, or local minimum wage requirements exist, employee pay will comply. Compensation Range: $17.20 - $31.90 Per Hour Depending on the position offered, employee may be eligible for other forms of compensation, such as annual incentives. Benefit Overview At nVent, we value our people and their health and well-being. We provide a broad benefits package with meaningful programs for eligible full-time employees that includes: Medical, dental, and vision plans along with flexible spending accounts, short-term and long-term disability benefits, critical illness, accident insurance and life insurance. A 401(k) retirement plan and an employee stock purchase plan - both include a company match. Other supplemental benefits such as tuition reimbursement, caregiver, personal and parental leave, back-up care services, paid time off including volunteer time, a well-being program, and legal & identity theft protection. At nVent, we connect and protect our customers with inventive electrical solutions. People are our most valuable asset. Inclusion and diversity means that we celebrate and encourage each other's authenticity because we understand that uniqueness sparks growth.

Company is confidential Yellowstone Local is proud to represent an industry leader in residential electrical services. You're a 3rd-4th year Electrical Apprentice with real residential experience under your belt, now it's time to join a crew that actually values your grind and helps you finish strong. What's in it for You? $20-$35/hour depending on experience End-of-year profitability bonuses Full-time, stable work (no temp or project-only gigs) Consistent local routes, home every night Clear path to journeyman licensure No micromanaging, just respect and results Why You'll Love It Here Tight-knit, no-BS team that knows their craft You're treated like a pro, not a number We run lean and pay well-everyone pulls their weight High-trust environment with clients and coworkers Opportunity to grow, lead, and sharpen your skills Your safety and success are our top priorities Your New Role Work on residential electrical systems, including troubleshooting, repairs, remodels, and service upgrades Drive to customer locations within the Plymouth/New Hope, MN area (must live within 10 miles of 55441) Represent the company with professionalism, courtesy, and technical know-how Communicate clearly with clients and team leads Use ServiceTitan (if you've got it) or learn fast, tech that makes your job easier Follow safety guidelines and complete jobs the right way, not the rushed way Location: Plymouth/New Hope, MN (must reside within 10 miles of 55441) Hiring Expectations: Apply today, complete a quick phone screening, and get ready for an interview with our team to discuss your goals and experience. Currently registered as an “RE” (Registered Unlicensed Electrician) with MN DOLI 4,000+ verified hours (with 5,000 to 7,000 hours preferred) Minimum 2 years of residential electrical experience Valid driver's license and clean driving record Own transportation to and from jobs Must pass a drug test Has a current DOT medical card or can pass the DOT physical Experience with ServiceTitan software is a plus This company is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment regardless of race, color, religion, gender, gender identity, sexual orientation, national origin, genetics, disability, age, or veteran status. #orange

Connexus Energy is searching for five experienced and dedicated Journey Lineworkers. As a Lineworker you will work on our crews gaining knowledge and experience in all aspects of safe construction and maintenance of our electrical distribution system as well as construct and maintain the overhead and underground electrical distribution lines in a safe, reliable and timely manner that will provide customers with safe, reliable service. Compensation: The union wage scale along with the candidate's experience will determine starting wage. The current pay rate for a journey Lineworker is $57.48/hour. Effective February 1, 2026 the rate will increase to $62.22/hour. In addition, this position is eligible for an annual bonus with a target payout of 5% of annual earnings based on company performance In this position, you will: Construct and maintain our overhead and underground electrical distribution system within the appropriate specifications, guidelines, and standards so that reliable service is provided in a safe and timely manner to our members. Construct overhead lines including framing, setting poles, stringing conductor, hanging materials and electrical devices according to all specifications Install primary and secondary underground electrical distribution system within the appropriate specifications, guidelines and standards Plow and trench cable Maintain the electrical distribution system to ensure its safety and reliability while minimizing any disruption of service Repair broken equipment such as poles and conductors Perform general troubleshooting Perform appropriate repairs Restore power in a safe and timely manner Analyze situation that led to the power outage Need to have: High School or GED diploma AND Electrical Lineworker diploma Current and valid Class A CDL Driver's License with a good driving record Current and valid health card Certified First Aid and CPR training Trained/able to perform bucket and pole top rescue Certified in pole climbing for construction and maintenance Ability to operate various equipment such as boom, digger derrick trucks and heavy equipment Mechanical aptitude to work with machines and equipment Ability to read and understand written work documents such as charts, diagrams, schematics and staking sheets Ability to meet the physical standards of the job: Lift & carry up to 75 lbs.; Push/pull up to 150 lbs.; climb & work at heights that may exceed 60 feet Commitment to customer service and ability to present a positive Connexus Energy image Other information: Successful candidates will be required to meet the following conditions: Normal work hours will occur anywhere between 6:00 a.m. to 11:00 p.m. with emergency or scheduled work on weekends, holidays or any time of the day Live within a 30-minute response time to Connexus Energy headquarters Become qualified for on-call rotation to handle emergencies that may occur at all hours of the day or night Pre-Employment Requirement: Employment is contingent upon successfully completing a pre-employment background check and drug screen. Based in Ramsey, Connexus Energy is Minnesota's largest electric cooperative, providing electricity, renewable energy alternatives and related services to 147,000+ residential and commercial members just north of the Twin Cities. We offer a collaborative work environment with challenging and rewarding work, which provides for professional development and work-life balance in a highly technical, stable and innovative industry. We give back to the communities we have served for more than 80 years by embracing opportunities to volunteer, donate and support economic development. Our talented and friendly staff focuses on achieving our mission of powering our members and communities toward a smarter energy future with a passionate focus on affordability, innovation, safety, and grid reliability. Connexus Energy's benefits package includes medical/dental/vision insurance, health savings account, flexible spending accounts, 401(k) plan with generous company matching and non-matching contributions and independent investment advisory services, accrued PTO, holiday pay, tuition reimbursement, recognition program, employee referral program, and employee activities. Company paid life insurance, short-term disability, and long-term disability is also provided. Equal Opportunity Employer All qualified applicants will receive consideration for employment without regard to disability status, veteran status, or other legally protected status.

Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: Drive tractor-trailer or escort vehicles. Material handling of heavy steel chains, blocks and steel cables, and other devices. Climbing and crawling on and under derailed railroad cars. Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding. Digging, hammering, and other physical types of work with various tools Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs. Work at heights over 25 feet on railroad cars; may be on bridges, over water, or in water. Why Join Us: Room for growth Union benefits including, but not limited to medical insurance and pension plan Take your career to the next level and join our mission-driven team! At Hulcher you can apply with confidence in knowing you will be a valued asset to our team and be a part of a stable thriving industry! Requirements What You Bring: Must have a valid Class A CDL with NO restrictions. Must have a valid driver's license. Ability to work on-call 24/7 365 days a year in an emergency response environment. Ability to travel up to 50% of the time. Ability to conduct maintenance inspections on equipment. Work Schedule: Monday through Sunday on the job or possibly at division. On call for 24 hours for derailments requiring immediate response. 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response. The Response Team is to be available at all times and all hours of the day. Salary Description $26.84/Hourly

About Us Brink Constructors, Inc. is an electrical contractor with over 75 years of experience in high-voltage transmission line and substation erection. With a long and industrious history, our experienced team continues to help power the nation now and into the future. At Brink, our success stems from the skilled personnel that we employ and the philosophy we instill to follow and uphold our core fundamental ideals including Safety First. Becoming a member of the Brink team is more than "just a job" or satisfactory employment-at Brink, we build careers, and we invest in the future of our people. Bring your skills to light and power your future with our team. About this Role This job requires a DOT physical and a current DOT medical card. Brink Constructors, Inc. Work will consist of installations, alterations, additions and/or repairs of electrical systems, and associated materials and equipment within the high voltage transmission and substation electrical industry. This is a non-exempt hourly role. Position requires 100% travel anywhere throughout the MidWest Pay: This is a non-exempt hourly role. The pay range is $50 -$55 / hour What You'll Do Perform duties necessary to complete assigned task under the direct supervision of project foreman and project manager. Employee should keep all materials, tools and equipment in an orderly fashion and maintain a clean work area at all times. Demonstrating safe work habits and proper care for tools and equipment. Clearly understand and comply with Brink Constructors and Federal Job Safety Requirements. (O.S.H.A.) Must be able to report to assigned job site location on time as directed. Maintain and properly store tools and equipment.Proper use and safe handling of tools, equipment and materials. Accurately organize materials and tools in order to maintain clean and neat work area. What You'll Bring Required: * High School Diploma or GED * Line School Certificate or Transcripts * Department of Labor Recognized Journeyman Lineworker Certification or proof of equivalent hours worked * 4+ years previous transmission construction or equivalent experience * Active, Valid Driver's License * Active, Valid CDL A What You'll Get Benefits * 401(k) with company match (traditional & roth available) * Paid Holidays and PTO * Parental Leave * Medical, Dental, Vision * Additional Voluntary benefits available * Employee Discounts * Company paid: * Health Plan (HDHP 5,000 -other plan options available for cost) * Long Term Disability * 1X Base Salary life Insurance * Employee Assistance Program Brink Constructors, Inc. does not sponsor applicants for work visas. All applicants must be legally authorized to work in the United States. Brink Constructors, Inc. participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. Brink Constructors, Inc. will only use E-Verify once you have accepted a job offer and completed the Form I-9. Brink Constructors, Inc. is an Equal Opportunity Employer and is committed to providing equal employment opportunities to all applicants and employees regardless of race, color, religion, gender, age, national origin, marital status, sexual orientation, disability, status as a covered veteran, or other military status. Applications for this position will be accepted on an ongoing basis. Compensation Range The anticipated compensation for this position is - depending on experience and qualifications. Equal Opportunity Employer All qualified applicants will receive consideration for employment and will not be discriminated against on the basis of race, color, religion, national origin or ancestry, sex (including gender, pregnancy, sexual orientation, and/or gender identity), age, disability, genetic information, veteran status, and/or any other basis protected by applicable federal, state or local law.We are an Equal Opportunity Employer, including disability and protected veteran status. We prohibit all types of discrimination and are committed to providing access and equal opportunity for individuals with disabilities. For additional information or if reasonable accommodation is needed to participate in the job application, interview, or hiring processes or to perform the essential functions of a position, please contact us the Company's Human Resources department.

*We are not actively hiring for this role. When we need to add someone, we will reach out to a qualified applicant to see if they are still interested. NEI Electric is a full service electrical contracting company with offices in White Bear Lake, MN and Eau Claire, WI. We are dedicated to providing our customers with personalized service and quality craftsmanship. Our customers include local and national businesses in healthcare, retail, industrial, food processing, and commercial markets. We are seeking individuals who are passionate about the electrical industry and are looking to contribute to a growing company. ESSENTIAL FUNCTIONS: · The main job of an electrician apprentice is to learn from a certified electrician. They will be learning everything they need to know to do the job and have to learn by instruction, observing and performing the tasks. The goal of an electrician apprentice is to be fully qualified once their apprenticeship is done, which means they should be able to do electrician tasks independently. By the end of the apprenticeship, the electrician apprentice should be able to lay out, assemble, install, test and repair electric fixtures. KEY REQUIREMENTS: · Preferred schooling in the electrical realm · High school diploma or GED at least · Basic understanding of how electric fixtures work · Client services or customer service skills · Oral and written communication skills · Ability to learn quickly through oral instruction or observation · Willingness to learn on the job · Good motor skills and finger dexterity NEI Electric is an equal opportunity employer and offers a competitive salary, a benefits package that includes medical, dental, vision, 401(k), profit sharing, flexible spending plan, and PTO. Job Type: · Full-time Pay: · 40% of Journeyman's wage Schedule: · Monday to Friday

JOB DESCRIPTION Title: Route Service Apprentice Department: Service Reports To: District Manager FLSA Status: Non Exempt Salary Grade: $22 to $24 per hour INFORMATION A Route Service Apprentice is one of those positions that many current CITY personnel started their career in. It is the position that gets people in the door of the Service Department. As a Route Service Apprentice, you will begin by riding with every single Route Service Representative at your location. From that, you will be able to pick up what makes each Route Service Representative great in their own personalized way. You will also have multiple mentors you can lean on to learn the basics of how things flow and work in Service Department. Once you complete the initial training, you will fill in for the routes when someone is out for vacation or needs additional assistance if they have a new account to install. The apprenticeship period typically lasts six to twelve months. Once a route opens up or we add a whole new route due to growth, the next step would be promoting you as a Route Service Representative, having your own route and your own customers to manage. BASIC RESPONSIBILITIES Responsible for filling in or assisting on any of our 17 routes Prompt and effective customer service Loading and unloading of delivery truck with clean and/or soiled laundry Delivering of products to customers Ensure customer satisfaction; Manage route efficiency and safety; Positive communication with customers, potential customers and co-workers. Product knowledge; pricing types, colors, sizing, inventory control, availability, product application. Load truck: organization, invoices, paperwork, bags. Account appearance: organization of rails, hanger racks, repair bags, lockers. Truck maintenance: timely communication of repairs, preventative maintenance, cleanliness, accidents. Ability to drive a commercial motor vehicle for at least 10 hours on a daily basis. Ability to lift up to 60 pounds on a frequent basis. Ability to drive a commercial motor vehicle for at least 10 hours on a daily basis. Maintain hygienically clean standards of garments by proper handling Other duties as assigned. This position requires regular and reliable attendance. QUALIFICATIONS Clean driving record and valid Drivers License 1-2 years job related and/or customer service related experience preferred For physical requirements please see attachment A. Must be 25 years old or older. WORKING CONDITIONS This job operates in a professional office environment. This role routinely uses standard office equipment such as computers, phones, photocopiers, filing cabinets and fax machines. The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to talk or hear. This is largely a sedentary role; however, some filing is required. This would require the ability to lift files, open filing cabinets and bend or stand on a stool as necessary. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. CITY Laundering Co is an equal opportunity employer and does not discriminate against otherwise qualified applicants on the basis of race, color, creed, religion, ancestry, age, sex, marital status, national origin, disability or handicap, or veteran status. An offer of employment is conditional upon passing a background check and drug screening. DISCLAIMER The above statements are intended to describe the general nature and level of work being performed. They are not to be construed as an exhaustive list of all responsibilities, duties, and skills required of personnel so classified. All personnel may be required to perform duties outside of their normal responsibilities from time to time, as needed. Attachment A ROUTE APPRENTICE Physical Job Functions: Drive truck to accounts (30-50 stops per day); Unload clean laundry from truck into account's location (use 2-wheel cart provided whenever possible); Sort, collect and gather soiled uniforms, linens, mats, etc.; Load dirty laundry onto truck; Load truck with clean laundry for the next day's route: Pull cart full of clean laundry to truck; Unload clean laundry from cart into truck; Push uniforms from rail system to rail closest to truck; Load hanging uniforms onto racks inside truck; Critical Physical Demands: Sitting: Frequently, in truck to drive to accounts and up to one hour to complete paperwork. Walking: Frequently, to load and unload truck and go to accounts and to perform other essential job functions. Distance varies. Bending: Frequently, to sort, count, load and unload laundry from the truck and at various stops. UP to 90 degrees flexion. Trunk Rotation: Frequently, to load, unload, sort, retrieve, and carry laundry. Squatting/Crouching: Frequently, to pick up, sort, retrieve and place laundry in bags. Climbing: Frequently, up and down steps in and out of some accounts and in and out of laundry truck, 30-50 stops/day. Reaching out/up: Frequently, to load, unload and hang laundry up to arms length and 70 inches from the floor. Grasping/Pinching/Wrist Turning: Continuously, to handle laundry, door handles, mats, hangers, bags, pen and paper, and to drive. Power and precision grasp. Finger Manipulation: Frequently, to write and untie/tie cords on bags. Pushing/Pulling: Frequently, up to 10 pounds of force to open and close truck doors, move clothes along rail system, bring laundry carts to truck. Lifting/Carrying: Continuously, up to 60 pounds to load and unload truck, take items to and from accounts - lifting from floor to 70 inches. Distance varies. Use of Feet: Frequently, to operate brake and gas pedals on truck and walking throughout the day to and from truck to make deliveries and inside accounts to deliver product.

Anchor Glass, headquartered in Tampa, Florida, is a leading North American manufacturer of premium glass containers with six, strategically-located production facilities throughout the US. Founded in 1983, Anchor serves many of the most iconic and recognizable consumer packaging brands in the beer, beverage, spirits and food industries, and strives to exceed customer expectations through unrelenting attention to detail. What we do goes beyond glass making. We find incredible meaning in all the small things that create enriching experiences for customers and consumers alike. Do you want to have a tangible positive impact on the company you work for? At Anchor Glass, each person knows the purpose and effects of their daily work on our business and our clients' businesses. We are one Anchor! Job Description Individuals in this role will repair and maintenance of electrical, mechanical, electronic, hydraulic and pneumatic equipment. Works with a wide variety of hand tools and power hand tools. May use welding and cutting equipment and machine tools. Works with oils and lubricants. Performs work that requires specialized experience and training related to skills trades. This role also repairs, overhauls and services mechanized equipment, i.e., hoists, elevators, conveyors, mobile equipment, hi-lifts, etc. Performs carpentry work in construction, repairing or modifying structures, cabinets, scaffolds, shelves, offices, jogs, fixtures, etc. Uses brushes and spray guns in painting interiors and exteriors, equipment, etc., including preparation of surfaces and mixing paints. Installs and maintains utility lines for gas, water, air, etc., including general plumbing work. Inspects, installs, relocates, repairs and maintains plant electrical equipment, i.e. motors, switch boxes, panels, instruments, starters, control devices, power circuits, feeders, etc. Installs, moves, repairs and maintains mechanical and electronic selecting devices. Removes, installs, repairs and checks plant mechanical devices and equipment. Cuts, brazes and welds various metals used on construction of forms, guardrails, catwalks, runways, stairs, etc. Works with furnace line personnel to install and adjust oil burners, etc. Inspects plant equipment and follows preventative maintenance program. Individuals will be trained Monday-Friday 7am-3pm and then assigned to a crew to work rotating shifts. Rotating shift work involves working 7 consecutive days of an 8am-4pm shift followed by 3 days off, then working 7 consecutive days of a 12mid-8am shift followed by 2 days off and then working 7 consecutive days of a 4pm-12mid shift followed by two days off and then starting back on the 8-4 shift. This amounts to working 21 days with 7 days off in a 28-day cycle. The apprenticeship is an 8,000-hour program and is governed by federally approved national standards. Those who are hired will be required to complete a minimum of 144 hours of approved classroom training each twelve months. Classroom training is through local technical schools. These classes are taken during your non-working hours, and you are not paid while attending. All courses, textbooks and fees will be paid at 100% by Anchor Glass Container. Additional Information Anchor Glass is committed to welcoming all people, thereby fostering a sense of belonging and opportunity across our organization. We do not discriminate against job applicants, employees, or any individual because of: age, race, color, creed, religion, national origin, sex, sexual preference or orientation, material status, disability or status with regard to public assistance. We are one Anchor!

Everlight Solar is seeking a hardworking individual to fill the role of Electrical Assistant. We are looking for a dependable individual that is passionate about developing lifelong skills and is seeking an entry-level position into the solar industry. Everlight Solar is a rapidly growing company and the leader of solar energy in the Midwest. We offer a unique experience that fosters individual growth and rewards performance. Our culture at Everlight is extremely important to us. The work environment is fast-paced and dynamic. We value teamwork, quality, innovation, and customer success. Our ideal candidate is self-motivated, detail-oriented, has excellent problem-solving abilities, is passionate about delivering results on-time, exceeding expectations, and ensuring success for our teams. If you want to join an up-and-coming industry with a top-notch company growing rapidly in the space, Everlight Solar is where you should be. Don't miss the opportunity to join the Everlight Solar team! Responsibilities: Assisting with solar panel installations on roof and ground mounted systems Assisting the electrician with wiring, maintaining and troubleshooting residential solar systems Construction experience including roofing and framing is a plus Prior electrical experience is not required. Candidates will be given the potential to earn a sponsored electrician apprenticeship. Qualifications: Excellent customer service skills required (Must have the communication skills necessary to confidently interact with customers, both over the phone and in person.) Thrive in a team environment. Regular, reliable and predictable attendance required. Must be comfortable climbing on roofs from a ladder. Must be comfortable crawling in attics. Must be able to work effectively when alone. Experience with solar power is beneficial, but not required, as it can be learned on the job. Apple/IOS User Benefits: Health Insurance Dental Insurance Vision Insurance Life Insurance Sick and Safe Time Paid Holidays Off PTO Starting salary range: $15-$25/ hour Everlight Solar is proudly an Equal Opportunity Employer. We value diversity of all types and are excited to work with talented individuals from a wide range of backgrounds. Everlight is committed to inclusion and we invite people of any race, creed, color, national origin, ancestry, marital status, sexual orientation, gender identity or expression, disability, nationality or sex, age groups (18+), and levels of education to apply. Authorized to work in the US and background check required.

Job Description Circet USA is the leading provider of Network Services in North America, and we're looking for talented professionals to join our team. We specialize in engineering and construction services delivering comprehensive solutions across Inside Plant, Outside Plant, and Wireless networks to meet the evolving infrastructure needs of our customers. With nearly 50 years of industry experience, we work with major telecom service providers, MSOs, cloud service providers, and utilities. At Circet USA, you'll have the opportunity to make an impact by helping to create customized solutions that address our clients' unique challenges. If you're passionate about innovation and thrive in a dynamic environment, we'd love to hear from you. Circet USA's benefits package includes the following: Medical, Dental, and Vision insurance Digital Health & Wellness Support Critical Illness, Accident, & Hospital Insurance Short-term & Long-term disability Group term & Voluntary life insurance Flexible Spending and Health Savings Accounts Paid Time Off & 401K Company Discount Website Responsibilities The Central Office Installer installs, sets up, rearranges, or removes switching, distribution, routing, and dialing equipment used in central offices or headend. They service or repair telephone, cable television, internet, and other communications equipment on customers' property; and install communications equipment or communications wiring in buildings. This role will provide high-quality service in customer technical spaces including data centers, mobile telephone switch centers, central office wire centers, and designated enterprise spaces. Physically place, remove, or modify non-working equipment including the following: Install superstructure components in support of cabling systems such as auxiliary bars, threaded rods, cable racking, cable trays, wire basket systems, etc... Cutting, filing, drilling, modifying infrastructure components and working with various tools such as bandsaw, hammer drill, jigsaw, ratchet/sockets, etc… Installation of data equipment cabinets and frames, data servers, switches, routers, repeaters, bridges, gateways, multiplexers, transceivers, firewalls. Identify, label, measure, and physically route the cables that supply AC and/or DC power or transmit data in various technical spaces. Read, analyze, and interpret detailed specifications and drawings, blueprints, schematics, and method of procedures (MOPs). Complete operations paperwork (e.g., expense reports, timesheets, job documentation, etc.) including daily job status reports as requested. Work and assist to complete tasks per direction and oversight of lead installer. Conduct basic cable testing; fiber & copper continuity, etc… Act as a customer contact; interface with customers and local supervisors regarding project status. Interact with all members of the organization including Installation, Engineering, Project Management. Perform other duties as requested. SAFETY DUTIES & RESPONSIBILITIES Adhere to, promote, and accept personal responsibility for compliance to: Federal and Local Occupational Safety and Health Regulations Industry Consensus Standards Circet USA Injury and Illness Prevention Program Manual Participate in job site safety/hazard analysis Qualifications EDUCATION, EXPERIENCE, and/or QUALIFICATIONS High school diploma or equivalent required, technical or college degree preferred. Proficient use of Microsoft programs, IOS and/or Android applications Ability to read and understand technical drawings and documentation. Good mechanical aptitude including usage of basic power tools. Strong organization as well as verbal and written communication skills Demonstrated problem-solving skills; ability to define problems, collect data, establish facts, and draw valid conclusions. LANGUAGE SKILLS Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before employees of the organization. MATHEMATICAL SKILLS Ability to add, subtract, multiply and divide in all units of measure. REASONING ABILITY Ability to apply common sense understanding to carry out instructions furnished in written, oral, or diagram form. POSITION QUALIFICATIONS/ REQUIREMENTS To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Exhibit personal power and leadership Exhibit self-awareness Exhibit a tendency for continuing education and self-improvement Exhibit enthusiasm and determination Exhibit industry awareness Exhibit exceptional organizational skills Exhibit the ability to live the Circet USA Values Circet USA is an Equal Opportunity Employer - Veteran/Disabled. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by law. Pay Range in the United States: $20 - $27 based upon geography, skills, and experience. May also be eligible for performance incentive opportunity based on company and individual goals and performance

Benefits: 401(k) Bonus based on performance Paid time off We are offering a great work environment and competitive pay. Come join our growing team! Are you tired of feeling under appreciated and not having a clear defined career path in your job? Imagine if you could know exactly what you needed to do to receive a pay raise and promotion from day one. At The Brothers that just do Gutters, you can! We provide a skills ladder training program that clearly defines each worker's career path, expectations, and raise potential.We truly believe in investing in our employees and have created a work culture unlike any other. We also offer huge opportunities for growth.This is an experienced position and the ultimate candidate will have at least 2 years of skilled carpentry and/or exterior construction experience. A positive attitude is a must, as well as the ability to properly, and comfortably interact with clients and other employees. You will be groomed for leadership in the field, to be part of a family, and to grow with an established brand.Requirements: 2 years experience in skilled carpentry and/or exterior construction Positive attitude Excellent communication skills Ability to work outdoors in all weather conditions/seasons Interest in growing with the company Willingness to work overtime Previous experience specifically related to gutter services/installation, and a passion for all things gutters (like us) is a huge plus! Compensation: Hourly Position ($20-$35) -- Salary commensurate with experience Required experience: Construction/Carpentry: 2 years Must be 18 or older Must have a valid drivers license About The Brothers that just do Gutters:The Brothers that just do Gutters are a full-service rain gutter and gutter guard franchise. We repair, install, and maintain Seamless Gutters, Gutter Guard, Specialty Gutters and many other services. The Brothers currently have other franchise locations in NJ, VA, PA, and FL. We are a performance-based company that focuses on delivering defined career paths to individuals with goals and aspirations and we fully invest in our workers. We believe that it is important to listen and create a comfortable work environment for all. Don't settle for a fixer-upper career, join us. Compensation: $40,000.00 - $70,000.00 per year Join Our Team at The Brothers that just do Gutters The Brothers that just do Gutters is a full-service rain gutter and gutter guard franchise, specializing in the installation, repair, and maintenance of seamless gutters, gutter guards, specialty gutters, and more. With over 100 franchise locations across the United States, we are rapidly growing and continuously seeking driven individuals to join our team. We are a performance-based company dedicated to providing clear career paths for individuals with goals and aspirations. We fully invest in our team members, believing that creating a comfortable and supportive work environment is key to success. Don't settle for a fixer-upper career. Join us and build something great. This franchise is independently owned and operated by a franchisee. Your application will go directly to the franchisee, and all hiring decisions will be made by the management of this franchisee. All inquiries about employment at this franchisee should be made directly to the franchisee, and not to Brothers That Just Do Gutters Corporate.

Job DescriptionDescriptionLelch is seeking an aspiring Low-Voltage Technician to join our team. You will be learn how to install, troubleshoot, and maintain low-voltage systems in commercial and residential settings. Once we get our hands on you, you will be able to ensure that installations are completed on time, on budget, and to the satisfaction of our clients! Your Location: In-Person 6035 Culligan Way, Minnetonka, MN 55345 Your Schedule: Full Time (40hrs/Wk) Mon-Fri from 8:00am to 5:00pm (CST) Your Manager: Jorge, Installation Manager Lelch's Core Values: Excellence Kindness Hustle Innovation You Will Learn How To: Pull/Terminate/Test Low-Voltage Cabling (Category, Fiber, Speaker, Lutron, Crestron) Mount devices at the ends of those wires Build and lace equipment racks Setup and configuration of devices Understanding of networks Troubleshooting of devices Eventually Programming (Lutron/C4/Savant/Crestron) Requirements An Interest in Commercial and/or Residential AV & Low-Voltage (Wiring & Installation) Familiarity with networking Valid driver's license and reliable transportation. Lelch's Contribution to You: $20/hr to $30/hr ($42k to $62k/yr) - Yup! Real Healthcare (Medical/Dental/Vision)- Check! 401k w/ 4% Match - You Bet! 10 Days PTO & 8 Paid Holidays - Of Course! Employee Discount

General Duties: Performs and assists with tasks related to sewer, water, street, storm sewer, and parks maintenance. Individual will be trained in all aspects of public works with a goal of developing an employee that would be qualified to fill a Public Works Maintenance Worker I position. Minimum Qualifications: High School diploma or G.E.D. Applicants must have the ability to safely lift heavy objects in excess of 50 pounds, walk and stand for long periods of time, and perform strenuous physical labor under adverse conditions. Ability to: communicate orally and in writing; understand and follow written and oral instructions; take initiative and carry out tasks independently. Driving record, criminal background, drug & alcohol testing and reference checks will be conducted prior to hire. To apply: **********************

Department Technician Employment Type Full Time Location St Louis Park, MN (Lelch) Workplace type Onsite Compensation $20.00 - $30.00 / hour Reporting To Jorge, Installation Manager This role's hiring manager: Chris Smith View Chris's Profile You Will Learn How To: Requirements Lelch's Contribution to You: About Lelch Always leading the way Since 2011, Lelch set out to be the leading force in residential, commercial, and lighting solutions. Today, we live it. We've achieved this great accomplishment by offering exceptional customer service and expertise while designing and installing unforgettable experiences for our clients. Our people We are expert designers, dreamers, and doers brought together to make your world greater.

Join the world's largest HVAC company, named by Forbes as one of America's Best-In-State Employers 2025! Daikin Applied is seeking a full-time HVAC Apprentice! In this role, you will be responsible for diagnosing, repairing, and performing preventative maintenance for commercial and industrial HVAC equipment. The HVAC equipment you will be servicing includes but is not limited to large and small rooftop units, split systems, chillers, and boilers. Come be a part of an exciting journey at Daikin Applied, where innovation and excellence drive our every endeavor! Location: Maple Grove, MN What you will do: Perform and assist in service of equipment including inspecting and testing systems to verify functionality including but not limited to fan coils, water source heat pumps, applied air handling units, rooftop units, cooling towers, and condenser tubes Perform and assist in the rebuilding of an HVAC unit. Receive detailed direction while sharing the hands-on task responsibilities with Journeyman and Foreman Drive a company vehicle to and from jobsite. Transport and maintain inventory of hand tools and necessary materials for job completion Record and report billing, inventory, timecards, technician tip reports, and other articles as required and in a timely manner Basic data entry and ability to navigate the use of email, internet, and word processing programs Demonstrate professionalism in appearance, verbal, and written communication Interact with customers by offering status reports of service before, during, and after each call Explain technical information to both technical and non-technical audiences Participate in available training through regional technician trainers, and off-site learning modules Maintain all required certifications and continue to develop new skill sets Complete jobsite hazard assessment prior to initiating service and adhere to Daikin Applied and customer safety policies and OSHA guidelines What's in it for you: Factory Certified Training, Refrigeration Certification or other professional on the job training in the HVAC Industry The opportunity to work on all types of commercial equipment and cutting-edge technologies such as Intelligent Equipment Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: Accepted as 3rd year Apprentice by the union High School Diploma or GED Technical school with HVAC certificate or equivalent combination of education and experience Valid Driver's License and acceptable driving record Rotational Emergency Call Support Required license(s) and/or training card as required by local law district Work visa sponsorship is not available for this position Preferred Qualifications: Member of local union or willing to join the union Commercial HVAC Industry Experience OSHA 10 within 90 days of hire (Daikin provides this training during onboarding process) Current first aid / CPR card The expected hourly rate for this position is $36 - 48 in MN. The rate is subject to the amount outlined in the CBA and could change based on the level offered. #LI-EM If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Job DescriptionSalary: $18 Are you looking to get in the carpentry industry? 24Restore is an industry leading restoration company in Ramsey, MN. We specialize in emergency clean up restoration caused from Fire, Water, Mold, Biohazard & Storms. We have been serving the Twin Cities area for over 25 years, helping people through some of the most difficult times in their lives. Our great team culture sets us apart from other companies. We are currently looking to fill 2 new Carpenter positionsin our rapidly growing, fast paced company. Position Summary for Carpenter: As a member of the Carpenter Team, you will work directly side by side with a Certified Carpenter at job sites: homes and commercial job sites. Perform fabrication, construction, installation and repairs of structural woodwork and wood products by following blueprints, drawings, and oral instruction: using hand or power tools and appropriate equipment. Measuring shaping and cutting material. Ensures quality inspection of finish carpentry work. Excellent benefits package for Carpentry Apprentice that includes: 401k Plan with 3.5 match Medical and Vision insurance fully covered by 24Restore Dental insurance Generous vacation policy Weekly training objectives Paid holidays Steady hours &All Year-round work Monday - Friday Schedule (Hours may vary depending on time of year; Starting times: 7:30 AM) 40+ hours per week Requirements for Carpenter Apprentice: Candidate must have carpentry interest and or must be able to perform basic carpentry skills Must have a valid Drivers License with clear driving record. Must be able to pass a criminal background check. Must be available for occasional overtime, sometimes on an emergency basis. Willingness to work outside in varying temperatures and elements, should you be assigned exterior responsibilities; such as, framing, window installation, and deck building. Some exceptions - by jobs. Must be able to work in a team setting Come join our team to help make a difference in the lives of our clients and restore their lives back to the way it should be!

Job DescriptionDescription: Hulcher Services is seeking a motivated and success-driven Apprentice Operator I. You will play a vital role in transporting, operating and the servicing of assigned heavy equipment used in clearing railroad derailments by lifting and moving derailed railway cars and locomotives. About Us: Hulcher Service is an industry leader with more than 500 employees and over 25 divisions located in the United States and Mexico assisting customers with derailments as well as engineering work, track maintenance, disaster response, and environmental projects. What You'll Do: Drive tractor-trailer or escort vehicles. Material handling of heavy steel chains, blocks and steel cables, and other devices. Climbing and crawling on and under derailed railroad cars. Maintenance, cleaning and setup of equipment requiring use of small and large tools including cutting torch and welding. Digging, hammering, and other physical types of work with various tools Lifting 100 lbs. maximum with frequent lifting and/or carrying objects up to 50 lbs. Work at heights over 25 feet on railroad cars; may be on bridges, over water, or in water. Why Join Us: Room for growth Union benefits including, but not limited to medical insurance and pension plan Take your career to the next level and join our mission-driven team! At Hulcher you can apply with confidence in knowing you will be a valued asset to our team and be a part of a stable thriving industry! Requirements: What You Bring: Must have a valid Class A CDL with NO restrictions. Must have a valid driver's license. Ability to work on-call 24/7 365 days a year in an emergency response environment. Ability to travel up to 50% of the time. Ability to conduct maintenance inspections on equipment. Work Schedule: Monday through Sunday on the job or possibly at division. On call for 24 hours for derailments requiring immediate response. 8-hours/day Monday through Friday; on call at other times for derailments requiring immediate response. The Response Team is to be available at all times and all hours of the day.