Assembly line worker jobs in Acton, MA

Production Assembler Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, and most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent Concept's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. No experience necessary. Willing to train crew members who demonstrate excellent hand/eye coordination with microscopic parts, who otherwise qualify. Candidates that have experience with arts and crafts, small model building, jewelry making, or small intricate mechanical devices may have the skills applicable to work with these micro assembly products. This is a full time, first shift position. The hours are Monday through Thursday, 7:00am to 5:30pm. RESPONSIBILITIES: Micro assembly product lines while working through microscope Prepare and assemble materials, build product subassemblies or final assemblies, plate product. Test and inspect products or subassemblies for functionality and quality. Set up and operate production fixtures and tools in accordance with good manufacturing practices and standard operating procedures. Inspect finished products for quality and adherence to engineering prints. Adhere to all applicable regulations, policies, and procedures for health, safety and environmental compliance. Clean production equipment, products, and work areas. Measure and record data associated with products. Other tasks as assigned by supervisor. QUALIFICATIONS: High level of hand/eye coordination with ability to work extended periods on a microscope Ability to perform mathematical calculations Familiarity with engineering drawings is preferred High school diploma or equivalent Physical agility This job operates in a lab/manufacturing setting. While performing the duties of this job, the employee is frequently exposed to fumes and moving mechanical parts. The noise level in the work environment can be loud. Computers and machines are used, and the employee must be coordinated and have the ability to lift and or move up to 25 lbs. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Must have depth perception and ability to adjust focus.

Apply now Job Title: Assembler- Taunton, MA Division: Distribution Posting Area: Operations + Manufacturing Looking for stability? Join Woodgrain! We're growing fast and offering lifetime careers in a supportive work environment. About Woodgrain: Woodgrain is one of the top millwork operations in the world, with locations throughout the United States and Chile. With 70 years of quality manufacturing craftsmanship and service, Woodgrain is a top producer of mouldings, doors, and windows, as well as a premier distributor of specialty building products. Woodgrain Inc. is headquartered in Fruitland, Idaho with six divisions and over 45 manufacturing and warehouse facilities in the United States and South America. Since 1954, Woodgrain is proud to be family owned and operated. Woodgrain is family-owned and one of the leading millworks and building products operations in the world. With over 65 years of product innovation, business growth, quality craftsmanship and service, Woodgrain is a leading producer of moulding, doors, and windows, as well as a premier distributor of specialty building products. Woodgrain, Inc. is headquartered in Fruitland, Idaho with six divisions and over 45 manufacturing and warehouse facilities throughout the United States and South America. Check us out at: ************************** What we bring to you: Compensation: $16.00-$17.50 (depending on experience) and quarterly bonus dependent on profitability. Woodgrain pays 75% of medical, dental and vision insurance. 401k matching, Woodgrain matches up to 3% of your base salary. PTO (2 weeks, 8 paid holidays, (1) floating holiday) Perks such as tuition reimbursement and large discounts off Woodgrain products What our ASSEMBLER does: Assembling the components of the job, which may include machining and/or assembling various millwork products such as exterior and interior door units. Operating machinery that modifies the product (ex. chop saws) Preparing the product for shipment by applying casing, sleeves, labels, etc. Inspecting the overall quality and accuracy of assembled product throughout the assembly process Repairing and disassembling returned or defective millwork to prepare it for resale or return to stock. Performing routine maintenance on all tools used including cleaning, oiling, checking to ensure proper functioning, calibrating machines, checking measuring tool accuracy, and notifying a supervisor of larger repairs or malfunctions. Working in a safe manner: Participating in all safety training and meetings Understanding and complying with the Company safety policy TOOLS USED: Include but are not limited to chop saw, table saw, rip saw, hand saw; router, nail gun, screw gun, door machine, various pneumatic tools, and drills. What you need to have: High School diploma or GED and one to two years' related experience and/or training; or equivalent combination of education and experience. Ability to read and comprehend instructions, correspondence, and memos. Ability to write correspondence, effectively present information in one-on-one or small group situations. Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals. Ability to perform these operations using weight measurements, volume, and distance. Might require forklift certification, depending upon branch requirements. Ability to solve practical problems and deal with a variety of concrete variables in situations where limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Ability to understand branch and industry standards in identification, measurement, repairs, replacements, and modification of products. Woodgrain is an Equal Employment Opportunity Employer. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Woodgrain believes that diversity and inclusion among our employees is critical to our success, and we seek to recruit, develop, and retain the most talented people from a diverse candidate pool. Employment at Woodgrain is based on merit, competence, and qualifications, and we are committed to providing equal opportunities for training and advancement for all employees. Woodgrain is also committed to making our application process accessible to individuals with disabilities and will provide reasonable accommodation upon request. Woodgrain is a drug, alcohol, and tobacco free workplace. All offers of employment are contingent upon pre-employment background and drug screening, and some positions require a fitness for duty test. Summary of Company Benefits: * Health, Dental, and Vision Insurance * Health Savings Account (HSA) * Flexible Spending Account (FSA) * 401(k) with a Company Match * Group Term Life Insurance and AD&D * Employer Paid Long-Term & Short-Term Disability * Voluntary Supplemental Hospital and Accident Plans * Employee Assistance Program * 8 Company Paid Holidays & 1 Floating Holiday * Paid Time Off (PTO) Woodgrain is an Equal Employment Opportunity Employer. We are committed to providing an environment of mutual respect where equal employment opportunities are available to all applicants and employees without regard to race, color, religion, sex, pregnancy, national origin, age, physical and mental disability, marital status, sexual orientation, gender identity, gender expression, genetic information, military and veteran status, and any other characteristic protected by applicable law. Woodgrain is a drug, alcohol, and tobacco-free workplace. All offers of employment are contingent upon pre-employment background and drug screening, and some positions require a fitness for duty test.

MACOM designs and manufactures semiconductor products for Data Center, Telecommunication and Industrial and Defense applications. Headquartered in Lowell, Massachusetts, MACOM has design centers and sales offices throughout North America, Europe and Asia. MACOM is certified to the ISO9001 international quality standard and ISO14001 environmental management standard. MACOM has more than 75 years of application expertise with multiple design centers, Si, GaAs and InP fabrication, manufacturing, assembly and test, and operational facilities throughout North America, Europe, and Asia. Click here to view our facilities. In addition, MACOM offers foundry services that represent a key core competency within our business. MACOM sells and distributes products globally via a sales channel comprised of a direct field sales force, authorized sales representatives and leading industry distributors. Our sales team is trained across all of our products to give our customers insights into our entire portfolio. Position Overview: An Assembler 3 at MACOM is responsible for assembling micro-electronic components and precision electromechanical parts according to product specifications for the RF and microwave industry. This role requires ability to interpret blueprints, assembly drawings and diagrams, and supporting production processes to ensure efficient machine operation and achievement of production targets. The ideal candidate will have hands-on experience with hand soldering, manual die attach, manual substrate attach, and manual wire bonding. Experienced working under a microscope. Key Responsibilities: * Assemble and repair precision electromechanical parts, assemblies, and equipment. * Perform hand soldering, manual die attach, substrate attach, and wire bonding operations with high precision. * Experienced at using soldering irons, manual die attach and manual ball/wedge bonders. * Align, fit, and assemble component parts into completed units using hand tools, power tools, fixtures, and templates. Verify dimensions and clearances of parts to ensure conformance to blueprint specifications using instruments such as microscopes, micrometers, calipers, and height gauges. * Examine parts for defects, perform repairs and rework, and calibrate assemblies to meet operational tolerances. * Prepare work by studying assembly instructions, blueprint specifications, and parts lists; gather parts, subassemblies, tools, and materials. * Position parts and subassemblies using templates or by reading measurements. * Maintain a safe and clean work environment by complying with procedures, rules, and regulations. Key Competencies & Skills Required: * Proficiency in manual die attach, substrate attach, and wire bonding techniques. * Experience in hand soldering and manually placing small components onto electrical assemblies. * Ability to follow travelers, standard operating procedures, and interpret assembly drawings. * Skilled in using microscopes for inspection to ensure the highest quality standards. * Ability to solve standard problems using existing procedures and experience; analyze information and apply standard assembly practices. Required Qualifications and Experience: * High School degree or equivalent. May be currently taking or just completed vocational level training in a related field. * 5 years of related work experience. * MIL-STD-750, MIL-STD-883, MIL-STD-38534 * ANSI/ESD S20.20 protocols * IPC-610 and J-STD 1 a plus * Due to ITAR regulations, only candidates who are U.S. Persons (U.S. citizens, U.S. nationals, lawful permanent residents, or individuals granted asylum or refugee status) will be considered for this position. Physical Requirements: This role requires the ability to sit and perform detailed work under a microscope for extended periods of time (8-hour shift, excluding scheduled breaks). This position may also involve standing, walking, and traveling to other areas within the facility to conduct inspections or support related tasks. EEO: MACOM is an Equal Opportunity Employer committed to a diverse workforce. MACOM will not discriminate against any worker or job applicant on the basis of race, color, religion, sex, gender identity, sexual orientation, national origin, age, disability, genetic information, veteran status, military service, marital status, or any other category protected under applicable law. Reasonable Accommodation: MACOM is committed to working with and providing reasonable accommodations to qualified individuals with physical and mental disabilities. If you have a disability and are in need of a reasonable accommodation with respect to any part of the application process please call *************** or email HR_*************. Provide your name, phone number and the position title and location in which you are interested, and nature of accommodation needed, and we will get back to you. We also work with current employees who request or need reasonable accommodation in order to perform the essential functions of their jobs.

Assembler 7AM-3:30PM $17.50/hour Works as a member of the production line to assemble headsets and their sub-assemblies and various other parts. SUPERVISORY RESPONSIBILITIES: None. DUTIES/RESPONSIBILITIES: The requirements listed below are representative of the essential duties required. Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks Escalate assembly issues to production supervisor as needed Perform repair work or rework as needed Clean and maintain work area and equipment, including tools Other duties as required. REQUIRED SKILLS/ABILITIES: Hand dexterity to assemble small components required EDUCATION AND EXPERIENCE: No formal educational credentials are required Experience in a manufacturing setting desired. WORKING CONDITIONS AND PHYSICAL REQUIREMENTS: The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical, Mental & Visual Demands/Efforts Prolonged periods of sitting at workbench Some moving of parts and from station to station and walking through the factory Must be able to lift 25 pounds at times Must be able to perform repetitive assembly tasks Must be able to understand and follow fabrication procedures Visual acuity to inspect products and tools Work Environment and Hazards Some areas in the building are not climate controlled. AMERICANS WITH DISABILITIES ACT David Clark Company complies with all aspects of the Americans with Disabilities Act (ADA) and state disability laws. This means that we will not discriminate against qualified individuals with a disability in any phase of the employment relationship including application for employment, hiring, promotions and/or advancement opportunities, termination, compensation, training and any other conditions or privileges of employment. This job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities. Duties, responsibilities and activities may change or new ones may be assigned at any time with or without notice.

What we do matters ! CPI Electron Device Business, with a history spanning more than seven decades, is a global leader in design, development, and manufacturing of electronic components and subsystems. We have locations in the United States and Europe. With a heritage of technological excellence, our team serves customers in the radar, defense, industrial, and scientific markets. CPI EDB produces thousands of products that have impacted people's lives in numerous unseen ways every day. Our highly engineered products serve as the backbone of modern-day commercial and military communications systems, support and protect soldiers, sailors, and pilots, empower scientific discoveries and space exploration, help ensure the safety of imported foods and materials, and much more. We are looking for energetic, agile, highly motivated, and customer focused individuals to join our team and help us to continue to be a market leader, shaping the future in communications and power. YOUR DAY TO DAY: We are seeking a detail-oriented and reliable Assembler I to join our manufacturing team. This role focuses on the precise assembly of sub-assemblies and chassis units, requiring work under a microscope and in a clean room environment. Ideal candidates will have experience with wire and ribbon bonding and a strong commitment to quality. YOU WILL BE ACCOUNTABLE FOR: Precise assembly of sub-assemblies and chassis units. Perform other duties as needed and assigned. YOU ARE THE RIGHT PERSON FOR THIS JOB IF YOU HAVE: Solder Training, J-STD. Wire bonding. Clean Room experience. U.S. Citizenship and are able to obtain/maintain a U.S. Department of Defense Security Clearance. Salary Range: $17.50 - $23.00 / hour EMPLOYEE BENEFITS: We recognize and appreciate that our employees are our most important asset. We invest in employee wellbeing by offering a wide range of comprehensive benefits to help you achieve your best physical and emotional health for yourself and your family. Employee Health & Wellness Benefits Medical, vision and dental insurance Disability insurances Life insurance and AD&D Employee assistance programs Workplace accommodations Financial Benefits Competitive compensation Annual performance and salary reviews Generous retirement savings plans with company match Paid time off Paid holidays Flexible work schedules Educational reimbursement Tax savings accounts Employee referral bonuses And more! * Please note that while our philosophy is the same in all locations, benefits may vary by office/country WHO WE ARE: We value the unique and diverse skills, qualities, and backgrounds that each employee brings to CPI EDB, and we respect each employee as an integral member of our growing team. CPI EDB is committed to providing equal employment opportunities for all current and prospective employees, as well as to promoting a culture of inclusion and respect for everyone. We celebrate the innovation that diversity creates in the work environment, and we recognize that each employee brings their own unique capabilities, experiences, and perspectives to the organization. It is this variety that adds value to our teams, as well as to our stakeholders. We welcome and encourage applicants to reach their full potential with us. CPI EDB is proud to be an Equal Opportunity and Affirmative Action employer. We do not discriminate based upon race, religion, color, national origin, sex (including pregnancy, childbirth or related medical conditions), sexual orientation, gender, gender identity, gender expression, transgender status, sexual stereotypes, age, status as a protected veteran, status as an individual with a disability or other applicable legally protected characteristics.

The Panther Group is currently seeking an Assembler for a contract to hire opportunity with a respected manufacturing company. This role is ideal for someone who enjoys hands-on work, pays close attention to detail, and has experience in small parts assembly. You will be working as a member of a production line to assemble headsets and their sub-assemblies and various other parts. Key Responsibilities: Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks. Escalate assembly issues to the production supervisor as needed. Perform repair work or rework as needed. Clean and maintain work area and equipment, including tools. Other duties as required. Requirements: No formal education credentials are required. 0-1 years of experience in a manufacturing setting. Hand dexterity to assemble small components required. Detail-oriented and consistent. Works well as a productive member of a team. Ability to troubleshoot and make necessary repairs. Position does not require any previous experience working with office software. This is a great opportunity with a reputable company to gain valuable experience in a hands-on manufacturing environment. Pay up to $19 per hour, DOE #INDENG

Wall Industries, a subsidiary of Continental Resources, Inc., is located in Exeter, NH. The company manufactures and markets a full line of DC/DC converters and AC/DC power supplies with an emphasis on modified standard and customized power solutions to a worldwide market. We are currently looking for an Assembler to join our team. Essential Duties and Responsibilities: * Performs visual inspection of printed circuit board assemblies and sub assemblies to ANSI/IPC 610 B soldering workmanship standards * Works with Engineering documents, visual aids, inspection instructions and checklists * Records and reports defects * Re-inspects reworked units * Identifies non-reworkable issues to the supervisor * Routes non-conforming material to the Material Review Board (MRB) * Applies use of Electro Static Discharge (ESD) precautions when handling products * Works independently in the Engineering Department with Engineers #ConRes # of Hires Needed 1 Exemption Type Non-Exempt Hiring Manager Job Requirements Qualifications or equivalent: High School Diploma or equivalent Minimum of 5 years in a Soldering/Rework position IPC Solderer Certification Ability to build electrical boards using engineering drawings Rework Certification Ability to identify solder defects for through hole and surface mount components Ability to distinguish the difference between rework and repair requirements Ability and willingness to train, learn and perform other duties as required Familiar with: * ANSI/IPC 610B workmanship standards * Electro Static Discharge (ESD) requirements * Ability to Read Engineering Bill of Material and other Engineering documents

reference job description. All Job Posting Locations (Location) Woburn Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job Description Job Title: Production Worker - Level I Pay Rate: $19.00/hour Shift: 1st Shift | [Insert hours, e.g., 6:00 AM - 2:30 PM] Schedule: Monday - Friday We are seeking a dependable and hardworking Production Worker Level I to assist with daily processing of customer orders. This entry-level role involves basic production, packaging, and warehouse tasks. Training is provided. Key Responsibilities: Prepare the production and loading areas for daily operations Use an electric pallet jack to move, stack, load, and unload products Make boxes and handle packaging materials Weigh, count, or scale products for customer orders Pack and label items according to order requirements Handle and distribute ice for storing temperature-sensitive products Clean processing areas and dispose of waste properly Monitor inventory supplies and ice machine as needed Follow safety protocols and procedures Perform other duties as assigned Qualifications: Basic understanding of warehouse or production tasks Ability to lift up to 100 lbs occasionally and 50 lbs frequently Able to work in cold environments (super freezer at -70°ree;F) Comfortable standing, bending, and lifting throughout the shift Able to operate electric pallet jacks and basic equipment (training provided) Reliable and punctual with a strong work ethic Work Environment: Cold storage and production areas May work in slippery or wet conditions Physically demanding role with heavy lifting and repetitive tasks Team-based environment with a focus on quality and efficiency Powered by JazzHR zm7647TPCd

Benefits: 401(k) 401(k) matching Dental insurance Health insurance Opportunity for advancement Paid time off Profit sharing Vision insurance Job SummaryColumbia Tech provides Time to Market Services at WARP SPEED™,including product development, manufacturing, global fulfillment and aftermarket services. Columbia Tech clients include innovation leaders in the life-science, bio-discovery, alternative energy, semiconductor, power management, LED, medical, data storage, homeland security and robotics and automation industries. Columbia Tech is a subsidiary of Coghlin Companies, Inc., a fourth generation, privately held concept to commercialization firm. Columbia Tech was named one of the “Best Places to Work” in 2017, and the team works hard to maintain a culture and environment built on trust, respect, continuous improvement, and innovation.Working with little to no supervision, the EM Assembler performs a variety of assembly operations associated with a wide variety of electrical and mechanical products, according to written procedures, drawings, and established workmanship standards. Build capital equipment, bench top assemblies, mechanical assemblies, electrical assemblies, pneumatic assemblies, hydraulic pumps, small complex biomedical devices, and electrical components. Duties and Responsibilities Work from written instructions that provide detailed methods and sequence of assembly operations using a bill of materials, wiring diagrams and assembly drawings. Assemble and fabricate assemblies using company-supplied hand and power tools. Interface with Engineering and Quality Assurance regarding assembly requirements, workmanship standards and customer product specifications. Work with customers to learn new product builds and transfer knowledge to other assemblers. Assemble electrical panels and electrical boxes and troubleshooting if required. Conduct final assembly, functionality testing, hi pot testing and final calibration. Prepare point-to-point wiring according to wire run-list and diagram in large electrical panels. Integrate sub-assemblies, electrical panels, chassis, power supplies and connecting cables. Inspect and calibrate final products as needed Assemble products per assembly process specifications. Performed processes utilizing tools such as calipers and micrometers. Strong ability to assemble, disassemble and repair. Lead and manage the work of teams groups ranging from 2-8 people. Qualifications High School diploma or GED with experience, prefer technical school. Strong attention to detail, focus, and highest standards for quality. Experience working effectively with customers. PC hardware, software installation and configuration experience. Good communication skills (English), both written and verbal. Ability to work in a fast-paced environment. Able to analyze problems and offer solutions. Clean room environment experience a plus. Experience with complex panels, multiple components and large wire run lists. Understanding of “big picture” workings of surrounding areas. Exemplifies leadership but does not necessarily manage. Has worked on large scale capital equipment a plus. Working Environment Approximately 90% of the work is performed in a precision, light industrial production area. The remaining time will be spent in office and warehouse areas. Physical Requirements While performing the duties of the job, the associate is regularly required to stand for an extended amount of time, walk and reach with hands and arms. Must be able to lift and move up to 50 pounds. Note: The above statements are intended to describe the general nature and level of work being performed by employees assigned to this classification. They are not intended to be construed as an exhaustive list of all responsibilities, duties and/or skills required of all personnel so classified. Equal Opportunity Employer Minorities/Women/Protected Veterans/Disabled__ We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law. Columbia Tech provides world-class product development, manufacturing, global fulfillment, and aftermarket services to a diversified group of capital equipment innovators in the medical, life sciences, energy, homeland security, robotics and automation, communications, 3-D printing, semiconductor, LED, water treatment, and food and beverage industries. OUR MISSION AND VISION Coghlin Companies is a fourth generation, privately held Time to Market Services company providing world-class product development, manufacturing, global fulfillment, and aftermarket services to a diversified group of capital equipment innovators in the medical, life sciences, energy, homeland security, robotics and automation, communications, 3-D Printing, semiconductor, LED, water treatment, and food and beverage industries. Through our proprietary Scaled Product Launch (SPL™) process, we commercialize complex capital equipment products at WARP SPEED with great quality, compliance, competency, passion, and transparency. We leverage lean manufacturing and our global supply chain network to continuously reduce the cost of client products and deliver them to the marketplace quicker than the competition. For more than 130 years, our passionate team of Caring Associates has remained focused on creating positive first impressions and exceptional customer experiences with clients by promoting a culture of collaboration and long-term trustful relationships, enabling a higher probability of product launch success and unmatched referability.

The Production Worker is responsible for performing all tasks involved in the production of the company's products. The individual in this position follows standard work methods and practices safe work habits to ensure production is as efficient and safe as possible. ESSENTIAL FUNCTIONS To perform this job successfully, an individual must be able to perform each essential function. Perform work on production line; run equipment and inspect, stack, separate, count, and pack product. Conduct quality checks and properly record information. Monitor machinery and equipment operation to ensure all product meets performance specifications and requirements. Promptly notify supervisor of any quality or production issue. Assist with changeovers. Maintain good housekeeping and regularly clean work area, machines, and equipment. Identify and contribute to continuous improvement efforts to reduce costs or increase productivity without reducing effectiveness. Maintain an open and candid working relationship with immediate supervisor/manager in discussing matters of importance. Adhere to established company values, practices, policies and procedures at all times. Follow and support compliance with all applicable safety rules, laws, regulations, and standards. Demonstrate regular and punctual attendance at the assigned work location. This job description reflects management's assignment of essential functions; it does not prescribe or restrict the tasks that may be assigned MARGINAL FUNCTIONS The individual may be asked to perform other duties as requested. REQUIRED KNOWLEDGE, SKILLS, AND ABILITIES An individual qualified for this job must be able to: Keep up with machine production rates. Accurately multiply, divide, add, and subtract whole numbers to resolve practical problems. Operate a computer PC proficiency; use spreadsheets and reporting software effectively. Wear/use required PPE (personal protective equipment). Understand written instruction and complete appropriate documentation as directed. Use a logical approach to troubleshooting issues and prioritizing production needs. Recognize problems when they occur and to work toward the solution of those problems. Pay attention to details and pursue quality in accomplishing work duties and tasks. Look for opportunities to reduce costs or increase productivity without reducing effectiveness. Handle challenges skillfully, thoroughly, and effectively. Effectively and professionally communicate with co-workers, team members, and internal or external customers. Present information clearly and accurately. Independently take advantage of opportunities to improve or increase skills, abilities and job knowledge. Make sure that work is delivered on time and of high quality. Develop good work practices in order to get the job done. Use equipment, resources and time in an efficient and effective manner. Use good judgment when making decisions. Perform work in a safe manner at all times. Work in a cooperative manner with management, co-workers, internal/external customers, and vendors. Do the right thing, even when it is difficult. MINIMUM EXPERIENCE, EDUCATION, AND CERTIFICATIONS Entry level position (0 to 2 years experience). Must be able to obtain forklift license through Highline Warren. PHYSICAL DEMANDS OF ESSENTIAL FUNCTIONS The physical demands described here are representative of those that must be met by an individual to successfully perform the Essential Functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Remain in a stationary position when performing line operations. Regularly move about when moving along the line as needed to perform job duties. Transport products and materials weighing up to 58 pounds when moving products to the line and or emptying boxes to the load area. Manipulate products on pallets, using force of up to 35 pounds. Position oneself to retrieve products or materials from ground level. Reach forward and overhead when inspecting product and moving pallets. Ascend/descend stairs/ladders to access the machine, catwalk, and when climbing over machinery/line. Position and handle product, boxes, and pallets. Perceive the nature of sounds and have the ability to exchange detailed information while performing job duties in a manufacturing plant where noise level is moderate to high. Move about the manufacturing facility to observe and effectively communicate with team members and perform job duties. ENVIRONMENTAL CONDITIONS The environmental conditions described here are representative of those the associate encounters while performing the Essential Functions of the job. The individual in this position will be expected to work in a manufacturing plant environment, which may include being exposed to work in high/precarious places, moving machinery, marked changes in temperature and humidity, and dust, odors and fumes. Typical noise level is loud.

Title: Entry Level Production Worker (Sandblast) Type of Placement: Temp to hire Shift: Mon-Friday 7:30AM - 4PM Pay/Pay Range: $18-20/hr About Our Customer: Well established manufacturer in Londonderry, NH. Our client takes pride in providing a work atmosphere that is a relatively low key and temperature-controlled environment. They are an AS9100D & ISO 9001 certified company. Benefits upon Hired Perm: Medical (Company pays 70%) Dental 401K Two weeks off each July Summary: We are currently seeking a dedicated and skilled individual to join our team as an entry level Production Worker. In this role, you will be responsible for the critical process of surface cleaning cast aluminum parts for inspection. It involves using compressed air to propel abrasive material at a surface under high pressure (60 psi) in an enclosed cabinet. ESSENTIAL FUNCTIONS: Utilize high-pressure compressed air to clean cast parts to prepare for inspection. Follow established procedures and guidelines to ensure safe and efficient operation of tools and equipment. Inspect parts for defects or irregularities. Work independently to prioritize tasks and manage workload to meet production deadlines. Maintain a clean and organized work area to ensure safety and efficiency. Communicate any issues or concerns regarding equipment or materials to the supervisor. Adhere to all safety protocols and guidelines to minimize the risk of accidents or injuries. Participate in training programs to enhance skills and knowledge related to sandblast techniques. EDUCATION and/or EXPERIENCE: High school diploma or equivalent. Previous experience in a manufacturing or industrial environment, preferably in a role involving metal casting or fabrication, but not required. Strong attention to detail and ability to identify defects or irregularities in parts. Physical strength and endurance to lift and handle parts weighing up to 50 pounds routinely. Good communication skills and the ability to work independently. Willingness to work in a fast-paced environment and adapt to changing priorities. Ability to follow both written and verbal directions. Manual dexterity and good eye coordination is necessary. About Wicked Staffing Solutions: We have built long-standing relationships with some of the most reputable and well-known top companies that are hiring in manufacturing, distribution, customer service, engineering, electronics and many other industries. We offer temporary, temp-hire and direct placement opportunities, in a variety of positions. Equal Opportunity Employer

Connexion's mission is to provide "best in class" services to job seekers. We strive to achieve excellence in job placement, staffing, and recruiting services, while treating candidates with the professionalism and respect they deserve. Title: E/M Assembler Hiring Organization: Connexion Systems & Engineering Compensation, Benefits, and Employment Type Duration: Temp to Perm Pay Rate: $18-$20/hr. Job Location: Worcester, MA Schedule: Mon-Fri 7am-3:30pm Job#: 18027 Onsite Soldering Test: Hand soldering---using a handheld soldering iron, understanding the purposes of the chemicals involved (flux, flux thinner, alcohol), using lead-free solder wire, stripping and tinning small gauge wire. Candidate will be given two different simple assemblies to complete, and will be evaluated on the following criteria: Knowledge and ability in soldering Ability to read and understand simple fabrication procedure documents. Ability to solder in a fast-paced production environment. The assessment is timed to 30 minutes (A typical, experienced solderer can complete the assessment in 5 minutes or less) JOB SUMMARY: An Electromechanical Assembler works as a member of the production line to solder and assemble various electromechanical parts. DUTIES/RESPONSIBILITIES: The requirements listed below are representative of the essential duties required: Mount, connect, assemble and secure parts and components of electronic equipment utilizing hand-soldering techniques. Assemble and test electromechanical components using a variety of tools and/or equipment according to required specifications, processes, and procedures. Conduct quality control checks. Escalate assemble issues to the production supervisor as needed. Perform repair work or rework as needed. Clean and maintain work area and equipment, including tools. Other duties as required. LEVEL OF RESPONSIBILITY: Employees work under general supervision. Employees have little or no decision-making responsibility. The employee has little or no impact on the decisions of others. REQUIRED SKILLS/ABILITIES: Ability to hand solder required and must pass the internal certification process. Dexterity to assemble small components required. Position does not require any previous experience working with office software. EDUCATION AND EXPERIENCE: No formal educational credentials are required. Zero-1 year of experience in a manufacturing setting is helpful. Soldering experience or training preferred. Specialized training or certification required. WORKING CONDITIONS AND PHYSICAL REQUIREMENTS: The work environment characteristics described here are representative of those encountered while performing the essential functions of this job. Physical Demands/Efforts Prolonged periods of sitting at a workbench. Some moving of parts and from station to station and walking through the factory. Occasional physical exertion includes some lifting of objects weighing up to 25 pounds. Must be able to perform repetitive soldering and assembly tasks. Mental & Visual Demands/Efforts Considerable mental concentration to effectively execute complex tasks. Must be able to understand and follow fabrication procedures and wiring diagrams. Work requires frequent visual effort for extended periods of time. Visual acuity to inspect products and tools. Work Environment and Hazards Some areas in the building are not climate controlled. Some exposure to heat, dust, or other factors of minor inconvenience. Some exposure to hazards that might cause minor injury. Please use the apply button to submit your resume for consideration. A Connexion Representative will contact you shortly. You may also send your resume and cover letter via email to the recruiter listed below. You MUST include the Job# and Job Title in your subject line. If you are active in a job search but this job is not for you, please reach out to *************************. We would be glad to help you find the perfect job!

**Roles and Responsibilities:** JOB TASKS MAY INCLUDE + Setting-up and operating inspection and/or manufacturing tools/equipment such as conventional electrical discharge machines, grinders, precision assembly devices, peen machines, TIG-tack welder, heat treat, plasma spray, etc. + Performing basic mathematical calculations + Using precision gages/fixtures and inspection measuring equipment and interpreting mechanical blueprints, sketches, engineering specifications and drawings, etc., to determine set-ups and operations necessary to complete job tasks. + Training duties. + Performing related environmental, health, safety, maintenance, quality, continuous improvement, and production-flow job duties to support plant machinery, equipment, and manufacturing-related initiatives and programs. + Maintaining detailed job task documentation, reports, and records. MINIMUM QUALIFICATIONS: + High school diploma/GED with a minimum of 1-year of experience in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering; Or + Bachelor's degree, Associate's degree or Technical certificate from an accredited university or college in a technically-related field i.e., manufacturing, fabrication, or mechanical engineering. DESIRABLE QUALIFICATIONS + Set-up and operation of machine/manufacturing tools and equipment. + Reading and interpreting mechanical blueprints, drawings, engineering specifications, etc. + Performing basic mathematical calculations. + Use of manufacturing/machine tool measuring equipment and gages. + Lean Six Sigma fundamentals. + EH&S processes and procedures. + Oral and written communication skills. + Demonstrated ability in maintaining relationships by recognizing needs and sensitivities of others, and cooperating and resolving conflicts that inspire the Team in achieving objectives and deliverables. + Demonstrated ability in receiving guidance and supervision, following work rules, safety practices, work procedures; meeting deadlines; and punctuality and attendance standards. _This role requires access to U.S. export-controlled information. Therefore, for applicants who are not asylees, refugees, lawful permanent residents or U.S. Citizens (i.e., not a protected individual under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3), otherwise known as a U.S. Person), final offers will be contingent on the ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government._ **Additional Information** GE Aerospace offers a great work environment, professional development, challenging careers, and competitive compensation. GE Aerospace is an Equal Opportunity Employer (****************************************************************************************** . Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Aerospace will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). **Relocation Assistance Provided:** No GE Aerospace is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.

2nd Shift! 2:15 PM to 10:45 PM Cleanroom experience is preferred with keen attention to detail in inspection of their work including the materials used. Also good hand eye co-ordination for assembly and detail oriented in their written documentation . Manufacturing experience is needed as this is a fast paced manufacturing environment, spending extended periods of time standing on their feet. Must follow written procedures plus have the ability to follow both verbal and written instructions. Patience and the ability to communicate while adapting to diverse group activity. Additional Information All your information will be kept confidential according to EEO guidelines.

Full-time Description Who we are: Double E Group is an international market leader in the engineering and manufacturing of web handling, material handling, and converting solutions. Our broad portfolio of products are marketed to the paper, tissue, film, and foil converting industries. Job Summary: As an Assembler, you will be responsible for assembling products and components according to detailed specifications and quality standards. Your duties will include reading engineering drawings, using hand and power tools to complete assembly tasks. Duties & Responsibilities: Assemble products per routings, engineering drawings, and specifications Identify and report defective materials or faulty equipment to the supervisor Work collaboratively with team members and support departments to resolve production issues Maintain a clean and safe working environment Follow all company policies, safety policies, and quality guidelines Perform additional tasks as assigned. Requirements Skills & Qualifications High school diploma or GED required Basic mechanical aptitude and ability to use hand and power tools Prior manufacturing or assembly experience preferred Ability to follow written and verbal instructions Basic math, measuring, and mechanical skills Ability to read and interpret assembly technical drawings Ability to work overtime as needed Working Conditions The worker is subject to inside environmental conditions: Protection from weather conditions but not necessarily from temperature changes. The worker is subject to noise: There is sufficient noise to cause the worker to shout in order to be heard above the ambient noise level. The worker is subject to vibration: Exposure to oscillating movements of the extremities or whole body. The worker is subject to hazards: Includes a variety of physical conditions, such as proximity to moving mechanical parts, moving vehicles, electrical current, working on scaffolding and high places, exposure to high heat or exposure to chemicals. Salary Description 25.00 - 28.00 per hour

Performs basic, standardized and repetitive electronic assembly operations and labeling of components, assemblies or sub-assemblies. Qualifications Prepares and assembles manually inserted components per visual aids, upon verification of specs from visual aid. Ensures assemblies and components are properly handled and marked. Accurately maintains daily logs; monitors and restocks parts bins as required. Utilizes bar code scanner and small hand tools. Visually inspects parts for proper insertion and placement. Works under direct, close supervision of Manufacturing supervisor, or in his/her absence, from Group Leader, or other management so assigned. Follows detailed written or verbal instructions, including visual aids. Additional Information High school diploma or equivalent preferred. If you are looking for a change and if you are interested in this job, you can contact me for more details. Direct Number- ************

Presser should have the ability to work in a fast-paced environment and have attention to detail. This position will work on the production floor and be trained to operate the robotics and computer system. Company is willing to train a hard working, reliable and honest individual. We offer great benefits, growth potential & training. Benefits include Health Insurance, paid vacation, sick and holidays, 401(k) with matching 3%, employee discount. Starting pay is $16+ based on performance and experience.

Production Assembler Amphenol Ardent Concepts is a leading designer and manufacturer of high performance multicoax and coaxial assemblies, connectors, and sockets used in the development of next generation semiconductors and electronics systems. Our core technology is the smallest, fastest, and most electrically efficient compression mount connector technology worldwide. As data rate requirements increase and devices and systems shrink, Ardent Concept's products deliver superior signal integrity in a dense footprint that can be reusable across programs to maximize cost savings. No experience necessary. Willing to train crew members who demonstrate excellent hand/eye coordination with microscopic parts, who otherwise qualify. Candidates that have experience with arts and crafts, small model building, jewelry making, or small intricate mechanical devices may have the skills applicable to work with these micro assembly products. This is a full time, first shift position. The hours are Monday through Thursday, 7:00am to 5:30pm. RESPONSIBILITIES: Micro assembly product lines while working through microscope Prepare and assemble materials, build product subassemblies or final assemblies, plate product. Test and inspect products or subassemblies for functionality and quality. Set up and operate production fixtures and tools in accordance with good manufacturing practices and standard operating procedures. Inspect finished products for quality and adherence to engineering prints. Adhere to all applicable regulations, policies, and procedures for health, safety and environmental compliance. Clean production equipment, products, and work areas. Measure and record data associated with products. Other tasks as assigned by supervisor. QUALIFICATIONS: High level of hand/eye coordination with ability to work extended periods on a microscope Ability to perform mathematical calculations Familiarity with engineering drawings is preferred High school diploma or equivalent Physical agility This job operates in a lab/manufacturing setting. While performing the duties of this job, the employee is frequently exposed to fumes and moving mechanical parts. The noise level in the work environment can be loud. Computers and machines are used, and the employee must be coordinated and have the ability to lift and or move up to 25 lbs. Specific vision abilities required by this job include close, distance, color, and peripheral vision. Must have depth perception and ability to adjust focus.