Assembly line worker jobs in Grand Junction, CO

Job Title: Production Block Thrower Reports To: Production Manager Department: Production Job Status: Full-Time Job Type: Hourly/Nonexempt Essential Duties and Responsibilities include the following. Other duties may be assigned. Receives work assignments and schedules from Production Leads. Ensure the production line is supplied with necessary tools, equipment, production orders, material, etc. Demonstrates ability to operate all equipment in a safe and efficient manner that adheres to company training and safety procedures. Evaluation of product on production line to ensure it meets or exceeds quality standards. Assist with troubleshooting mechanical and operations issues and ensure production line efficiencies. Assist in the completion of production line performance results reporting. Report faulty equipment, damages, and other safety hazards to supervisor/line lead. Competency: To perform the job successfully, an individual should demonstrate the following competencies: Quality Management - Demonstrates accuracy and thoroughness. Actively promotes the production of safe quality pet proteins by participating in food safety and quality improvement meetings or teams. Responding to food safety issues or quality issues of customers, as requested. Monitoring the GMP state of the facility and employees and taking corrective actions as necessary. Attendance/Punctuality - Is consistently at work and on time. Dependability - Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments. Quality - Demonstrates accuracy and thoroughness. Quantity - Meets productivity standards; Completes work in timely manner. Safety and Security - Observes safety and security procedures; meets company and departmental safety goals; Proper utilization of required PPE at all times; reports potentially unsafe conditions; Uses equipment and materials properly; actively participates in job hazard analysis and proposes potential solutions. Qualifications: To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform essential functions. Must be able to complete with passing grade general labor and safety training and all required training for their position. Education/Experience: High School degree or equivalent Employment Eligibility: Ability to provide proof of U.S. Citizen or Permanent Resident (Green Card) status. Ability to pass pre-employment screening (e.g., drug screen.). Work Environment: While performing the duties of this Job, the employee is regularly exposed to work near moving mechanical parts, risk of electrical shock and vibration. The noise level in the work environment is usually moderate. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. The employee must lift and/or move up to 60 pounds without mechanical assistance. Specific vision abilities required by this job include Close vision, Peripheral vision and Depth perception. While performing the duties of this job, the employee is occasionally required to stand; sit; use hands to finger, handle, or feel; reach with hands and arms; stoop, kneel, crouch, or crawl; talk or hear or smell. Equal Opportunity Employer Protein for Pets OPCO, LLC is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity, sexual orientation, national origin, ethnicity, age, disability, marital status, veteran status, or any other characteristic protected by law. Monday to Friday 6:00am to 2:30pm

When you work for AmeriGas, you become a part of something BIG! Founded in 1959, AmeriGas is the nation's premier propane company, serving over 1.5 million residential, commercial, industrial and motor fuel propane customers. Together, over 6,500 dedicated professionals will deliver over 1 billion gallons of propane from 1,800+ distribution points across the United States. Applications for this position will be accepted until 12/29/2025. Posting Job Summary (Purpose): The Utility Worker primarily works in the outside production area of the AmeriGas Cylinder Exchange facility. The employee is responsible for the processing of cylinders (20 lb. barbeque grill cylinders). Key Characteristics: Models a commitment to safety through his/her own day-to-day behavior; follows company safety procedures and policies Demonstrates high professional and personal standards; has a commitment to quality, timeliness, and continuous improvement Ability to function effectively as a member of a production team Duties and Responsibilities: Sort, inspect, clean, paint, label, and refill empty cylinders. Maintain a safety focus at all times and wear the proper PPE Ensure the consistent quality of cylinders are being processed Load filled cylinders onto the truck(s) for the next day's shipments. Ability to stand and walk 8 - 12 hours per day. Ability to lift 50 pounds repeatedly throughout the day. Perform general housekeeping duties. Knowledge, Skills and Abilities: Ability to follow processes, procedures, and instructions Ability to function effectively as a member of a production team Willingness to grow and learn Basic mechanical aptitude Basic computer knowledge Work in a fast-paced environment Be able to stand 8-10 hours per day Ability to obtain required state licensing Ability to be forklift certified Education and Experience Required: 1 - 2 years work experience in manufacturing is preferred High School Diploma or GED Working conditions: Environmental conditions such as wind, rain, ice, and snow may affect this job, as the production area where the employee spends most of the workday is not enclosed. AmeriGas Propane, Inc. is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. AmeriGas is a Drug Free Workplace. Candidates must be willing to submit to a pre-employment drug screen and a criminal background check. Successful applicants shall be required to pass a pre-employment drug screen as a condition of employment, and if hired, shall be subject to substance abuse testing in accordance with AmeriGas policies. As a federal contractor that engages in safety-sensitive work, AmeriGas cannot permit employees in certain positions to use medical marijuana, even if prescribed by an authorized physician. Similarly, applicants for such positions who are actively using medical marijuana may be denied hire on that basis. The pay for this position ranges from $19.00 to $20.00 , depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation may include eligibility to earn a performance-based bonus or commissions on completed sales depending on position. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

GENERAL DESCRIPTION Produce high-quality Concrete products with a focus on safety and efficiency. Salary range $24.04. Based on experience. WHY WORK FOR US? At Wells, we empower our team members to deliver an exceptional client experience. Our employees are talented problem solvers that shine in preconstruction, engineering, operations, and project management. They bring innovative solutions that yield outstanding results. In the design and construction industry, we focus on honesty and hard work to build trust that lasts beyond individual projects. Our team is consistently working to improve building processes and raise industry standards. We meet our partners' needs through collaborative efforts that ensure safe and certain results, reducing risks along the way. Together, we help businesses and individuals succeed and change our communities for the better. WHAT WE HAVE TO OFFER Wells values our employees and is committed to providing a competitive and comprehensive benefits package. Please note that the benefits listed here are for non-union employees. Benefits for union employees are covered under separate collective bargaining agreements which can be obtained through their union business agent or their HR representative. Health, dental and vision insurance Paid premiums for short- and long-term disability, and life insurance Wellness Incentives Paid holidays Flex spending for medical and daycare Health savings account (HSA) 401(k) plan with profit sharing Access to Nice Healthcare Employee Assistance Program Paid Time Off (PTO) Wishbone Pet Insurance Critical Illness Benefit Plan Accident Insurance Plan Voluntary Hospital Indemnity Plan Other benefits include Health and Family Care leave for both union and non-union employees. ESSENTIAL FUNCTIONS AND RESPONSIBILITIES Work with co-workers to strip, set-up and pour the bed in a timely manner Work with the Quality Control Department to ensure optimal quality Take direction from their Team Leader and Supervisor Flexible to perform work in any area including Production, Yard, Patching and other areas as needed Maintain a safe environment and have good housekeeping skills while working Participate in Lean Manufacturing objectives and improves the efficiencies of the department Have knowledge of quality programs and be able to perform quality work Come to work with a good attitude and work the hours needed to fulfill the job requirements Knowledgeable of day-to-day tasks that are performed and are aware of what the next step is without being told Maintain a professional relationship with employees in the plant and office Support company policies and have a positive attitude while working EDUCATION, SKILLS, AND ABILITIES REQUIRED Must have interpersonal communication skills to interact with co-workers, supervisors, and managers Must be able to solve problems quickly and efficiently General math skills and ability to read tape measure Ability to work with others to get the project completed efficiently and work independently when needed Knowledge of products the company uses, and which products would work best Understand and accept changes that are implemented to become Best in Class PHYSICAL REQUIREMENTS/ ADA ESSENTIAL FUNCTIONS Physically able to lift up to 75 lbs, occasionally Physically able to push, pull, lift, bend, climb, kneel, twist, squat, crawl and use hands/forearms repetitively and frequently Ability to move around for up to 12 hours per day Ability to work from ladders, scaffolding, swing stages and man lifts at various heights frequently WORKING CONDITIONS Moderate to high risk of exposure to unusual elements Moderate to high risk of safety precautions Moderate to high exposure to production environment Wet, hot, humid, and wintry conditions (weather related) (plant specific) Ability to work outside year-round (plant specific) This position profile identifies the key responsibilities and expectations for performance. It cannot encompass all specific job tasks that an employee may be required to perform. Employees are required to follow any other job-related instructions and perform job-related duties as may be reasonably assigned by his/her supervisor. Wells in an Equal Opportunity Employer, including Veterans and Individuals with Disabilities. Wells participates in E-Verify and will provide the federal government with your I-9 Form information to confirm you are authorized to work in the U.S.

Since 1869, we've connected people through food they love. We're proud to be stewards of amazing brands that people trust. Our portfolio includes the iconic Campbell's brand, as well as Cape Cod, Chunky, Goldfish, Kettle Brand, Lance, Late July, Pacific Foods, Pepperidge Farm, Prego, Pace, Rao's Homemade, Snack Factory, Snyder's of Hanover. Swanson, and V8. Here, you will make a difference every day. You will be supported to build a rewarding career with opportunities to grow, innovate and inspire. Make history with us. GENERAL SUMMARY Entry level production worker duties. PRIMARY RESPONSIBILITIES Various Production line duties on production line(s) may include manual handling of product, visual quality inspection of product and/or packaging, following Good Manufacturing Practices, housekeeping, adhering to acceptable safety practices, following supervisory instructions, may be scheduled on different lines as per production needs, other duties as assigned, etc. Includes cupping and packaging duties in a conveyor belt setting which involves repetitive motion of hand, arm and shoulders and standing all shift. Cupping Line duties require dropping/separating paper cups and using other hand to fill each with correct number of cookies. Must be able to use both hands and rotate sides of belt. Regular or routine lifting up to 25 pounds, occasional lifting up to 50 pounds. 6:50 am to 3 pm, will work most Sundays MINIMUM EDUCATION REQUIRED: High School Diploma or GED and/or 1-year production experience in a manufacturing environment required. EDUCATION & EXPERIENCE PREFERRED (NOT REQUIRED): preferred to have production line manufacturing experience or to have food service and food handling experience COMPENSATION & BENEFITS: The starting rate for this full-time, hourly position is $20.00. Individual base pay depends on work location and additional factors such as experience, job-related skills, and relevant education or training. Total pay may include other forms of compensation. In addition, we offer competitive health, dental, 401k and wellness benefits beginning on the first day of employment. Please ask your Talent Acquisition Partner for more information about our total rewards package. The Company is committed to providing equal opportunity for employees and qualified applicants in all aspects of the employment relationship, including consideration for employment, without regard to race, color, sex, sexual orientation, gender identity, national origin, citizenship, marital status, protected veteran status, disability, age, religion, or any other classification protected by law.

Job Description Purlin Line Machine Operator Join our Team at Great Western Building Systems At Great Western Building Systems (GWB), we don't just build steel structures-we build careers, innovation, and a team that feels like family. Established in 2016, GWB has rapidly become a powerhouse in the Pre-Engineered Metal Building industry, known for precision, strength, and craftsmanship in everything we do. If you're looking for more than just a job-if you want to be part of something bigger-this is the place for you. Our team is made up of driven, skilled, and passionate individuals who take pride in their work. What We're Looking For GWB is searching for a detail-oriented Purlin Line Machine Operator to join our growing team. If you're mechanically inclined, detail oriented, and thrive in a hands-on work environment, this is your opportunity to grow with an industry leader. No prior machine experience? No problem! We offer comprehensive training to set you up for success! Our Culture Our work environment is fast-paced, fun, and oftentimes exciting. Our team is built of a diverse group of individuals who all bring their own strengths to the table. We work hard during the week and enjoy our time off on the weekend. Responsibilities Safely load and unload metal coils from trucks using a forklift Position and load coils onto an uncoiler to roll form purlin parts according to specified sizes and schedules Use a cut-off wheel to trim parts and operate a mag drill to punch holes as needed Read and interpret blueprints and tape measurements to ensure precise production Maintain a clean and organized work area to support efficiency and safety Utilize computers and RFsmart scanners for inventory tracking and production processes Adhere to company safety policies and procedures Follow all safety protocols including wearing PPE and required PPE at all times. Required PPE is defined as gloves, safety glasses, and steel toe boots. Additional PPE, such as hard hats, flame-resistant clothing, hearing protection, face shields, respirators, etc, may be required depending on the specific tasks being performed or the work area. Duties, responsibilities, and reporting relationships may fluctuate or evolve in light of your skill, experience, and the company's needs Qualifications & Experience The ability to pass a pre-employment drug screening and background check is required 1 - 2+ years in a steel fabrication and manufacturing environment is a plus Experience operating a forklift or willingness to be trained Strong time management and organizational skills to prioritize tasks effectively Ability to read and interpret blueprints and use a tape measure accurately Mechanical aptitude with basic technical skills for operating and maintaining equipment Familiarity with or willingness to learn computer and scanner operations Ability to work independently and as part of a team in a fast-paced setting Must be able to walk, stand, use hands to handle tools, reach with arms, kneel, stoop, crouch, and talk and hear in noisy environments Must be able to regularly lift and move objects weighing up to 51 lbs independently and occasionally lift and move objects up to 100lbs with the assistance of team lifts. The work environment is primarily indoors, and will, at times, be exposed to natural weather elements such as heat, cold, sunlight, darkness, wind, rain, lightning, snow, and dust. The noise level in the work environment is usually moderate Compensation and Benefits $18.00 - $24.00 per hour, depending on experience Comprehensive benefits package after 90 days of employment Medical Dental Vision Health Saving Account (HSA) and Flexible Spending Account (FSA) Life Insurance Paid time Off Paid sick leave Employee assistance program More! Job Type Full-Time Monday - Friday Mandatory overtime and occasional weekend work may be required based on production needs Ability to Commute/Relocate Grand Junction, CO 81501: Reliably commute or planning to relocate before starting work (required) Work location: On Location

Disclaimer: SLB completed the acquisition of ChampionX on July 16, 2025. If selected for this position, your employment will begin with ChampionX and will transition to SLB as part of the planned integration. We are looking for an Assembly Worker located in West Valley City, UT. This is your opportunity to join a global technology company, driving energy innovation for a balanced planet. What's in it For You: Join a growing company offering competitive pay Comprehensive benefits package that includes medical, dental, vision, 401(k) with company matching and more The ability to shape your career with a company that is passionate about growth Be part of a culture that values its employees and puts safety first Grow your income as you drive growth Opportunity for a long term, advanced career path Access to Employee Resource Groups (ERG's). These employee-led groups allow employees to come together to explore common interests and foster a diverse and inclusive workplace Access to best-in-class resources, tools, and technology What You Will Do: Support and engage in our vision of improving lives Live and be an example of Quartzdyne's core values: Respect, Grit, Transparency, Honesty, Humility and Accountability Be a disciple and leader of continuous improvement Position Details: Work week and shift: Monday through Friday 6:00AM - 2:30PM Occasional overtime and weekends may be required. May perform assembly operations under microscope or other magnifying device. Reads work orders, follows production drawings and sample assemblies, or receives verbal instructions regarding duties to be performed. Positions and aligns parts in specified relationship to each other in jig, fixture, or other holding device. Crimps, stakes, screws, bolts, rivets, welds, solders, cements, press fits, or performs similar operations to join or secure parts in place, using hand tools, power tools, machines, and equipment. Mounts assembled components, such as transformers, resistors, transistors, capacitors, integrated circuits, and sockets, on chassis panel. Connects component lead wires to printed circuit or routes and connects wires between individual component leads and other components, connectors, terminals, and contact points, using soldering, welding, thermocompression, or related bonding procedures and equipment. Inspects and twists stripped wires together by hand to join designated colored wires. Secures core/coils, using metal strapping, metal cutters, and band clippers. Assembles and attaches hardware, such as caps, clamps, knobs, and switches, to assemblies. Performs intermediate assembly tasks, such as potting, encapsulating, sanding, cleaning, epoxy bonding, curing, stamping, etching, and color-coding parts and assemblies. May remove accessories from coils, using screwdriver, and wraps coils with paper and tape, leaving ends of wire leads exposed. Adjusts or trims materials from components to achieve specified electrical or dimensional characteristics. Minimum Qualifications: High School Diploma/GED required Immigration sponsorship not offered for this role Physical Demands: Normal working conditions absent extreme factors Must be able to see well enough to read reports, send emails, etc. Must be able to hear and speak well enough to communicate with customers and fellow employees Must be able to lift up to 50lbs regularly during the shift Role is deemed safety-sensitive and may be subject to employer or customer drug testing Preferred Qualifications: 1-3 years' experience in electronics assembly Ability to communicate effectively and professionally with coworkers, customers and vendors both verbally and in writing Ability to work effectively independently and as part of a team Ability to follow oral and written instructions Strong desire to learn and be a problem solver Must be punctual and eager to improve themselves and their surroundings Basic knowledge of Microsoft Word and Excel Must maintain the highest levels of integrity Experience using lean principle a plus Position Compensation and Benefits: Hourly Rate: $18.50 to start Medical Dental Vision Employer paid STD and LTD 1X your annual salary of employer paid life insurance 3 weeks of paid vacation to start 7 days of paid personal leave 12 paid holidays HSA Funding Generous profit sharing 401(k) match up to 6% About Us ChampionX is now part of SLB, a global technology company driving energy innovation for a balanced planet. As innovators, that's been our mission for nearly a century. We are a technology company that unlocks access to energy for the benefit of all. Today, we face a global imperative to create a future with more energy, but less carbon. Our diverse, innovative change makers are focused on going further in innovation and inventing the new energy technologies we need to get there. For more news and information, visit SLB.com Follow us on Facebook: @WeAreSLBGlobal, LinkedIn: SLBGlobal, or Instagram: @SLBGlobal About Quartzdyne Quartzdyne designs and manufactures precision pressure and temperature transducers for the oil and gas industry. Our proprietary offerings have become the industry standard, elevating how critical data is used to assess the performance of a reservoir and increase oil production. Our sensors are world-renowned for providing intensely accurate and high-resolution data under the most extreme conditions. At Quartzdyne, we live by our core values of Respect, Grit, Honesty, Transparency, Humility and Accountability. Quartzdyne is located along the beautiful Wasatch mountain range in Utah. Our Commitment to Diversity and Inclusion We believe the best teams are diverse and inclusive, and we are on a journey to create a workplace where every employee can grow and achieve their best. We are committed to fair and equal treatment of employees and applicants. We recruit, hire, promote, transfer and provide opportunities for advancement on the basis of individual qualifications and job performance. In all matters affecting employment, compensation, benefits, working conditions, and opportunities for advancement, we will not discriminate against any employee or applicant for employment because of race, religion, color, creed, national origin, citizenship status, sex, sexual orientation, gender identity and expressions, genetic information, marital status, age, disability, or status as a covered veteran. In addition, we are committed to furthering the principles of Equal Employment Opportunity (EEO) through Affirmative Action (AA). Our goal is to fully utilize minority, female, disabled and covered veteran individuals at all levels of the workforce. We will consider for employment all qualified applicants, including those with criminal histories, in a manner consistent with the requirements of applicable state and local laws, including the City of Los Angeles' Fair Chance Initiative for Hiring Ordinance and the San Francisco Fair Chance Ordinance.

An assembly job typically involves assembling various components or parts to create finished products. Here's a detailed job description for an assembly worker:Job Title: Assembly WorkerResponsibilities: Component Assembly: Assemble parts or components according to provided instructions, blueprints, or diagrams, ensuring accuracy and quality standards are met. Use of Tools and Equipment: Operate hand tools, power tools, and machinery safely and efficiently to assemble products, following proper procedures and safety guidelines. Quality Control: Inspect parts and finished products for defects, irregularities, or damage, and make necessary adjustments or repairs to ensure compliance with quality standards. Problem Solving: Identify and resolve issues or discrepancies in the assembly process, such as missing parts or incorrect specifications, by troubleshooting and communicating with supervisors or colleagues. Workflow Coordination: Coordinate with team members to ensure smooth workflow and timely completion of assembly tasks, collaborating to meet production quotas and deadlines. Documentation: Record production and quality data as required, such as quantities assembled, defect rates, and production times, using paper or electronic forms or systems. Safety Compliance: Adhere to safety regulations and guidelines when handling tools, equipment, and materials, wearing appropriate personal protective equipment (PPE) and following safety protocols to prevent accidents or injuries. Cleaning and Maintenance: Maintain cleanliness and organization in the work area, including assembly stations, tools, and equipment, and perform routine maintenance tasks to ensure optimal performance and longevity. Qualifications: High school diploma or equivalent. Previous experience in assembly or manufacturing preferred but not required; on-the-job training may be provided. Ability to follow written and verbal instructions accurately and efficiently. Manual dexterity and hand-eye coordination for handling small parts and operating tools. Attention to detail and quality, with a focus on producing accurate and defect-free work. Ability to work effectively in a team environment and collaborate with colleagues to achieve common goals. Basic math skills for measuring, counting, and performing simple calculations related to assembly tasks. Working Conditions: Work may be performed in a manufacturing or production facility, which may involve exposure to varying temperatures, noise, and machinery. Physical demands include standing for extended periods, lifting and carrying objects, and repetitive motion tasks. An assembly worker plays a critical role in the manufacturing process, contributing to the efficient production of goods and ensuring that finished products meet quality standards and customer expectations.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description For 60 years, Kelly Services has provided outstanding employment opportunities to the most talented individuals in the marketplace. Today, we are proud to offer a full time contract Assembly Worker position for a top Medical Devices and Supply Company located in, Boulder, CO. Position Description: •Responsible for hands on assembling of electrical and mechanical sub and final assemblies while following safe work practices. Requirements: •With or without manufacturing experience •High School Diploma or GED required Shifts: •3rd: 10:00PM - 6:30AM (weekends off) •12 hour shift ◦6AM - 6PM (various days off) ◦6PM - 6AM (various days off) This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume to marc595 @kellyservices.com. If you have questions about the position, you may contact Jin Pengson the recruiter for this position at 303-997-0290; however your resume must be received via email or submit resume button included within. Qualifications With or without manufacturing experience High School Diploma or GED required Additional Information BENEFITS: •Immediately eligible for our optional Health Benefits, including Medical, Dental, Vision, Prescription Drug Coverage, Short-Term Disability and Group Life Insurance •Vacation and Holiday Pay •Access to our company Learning Center for training and career development •Weekly pay through our electronic pay programs (via direct deposit or pay card) Apply now!

Job DescriptionDescription: Rocky Mountain ATV/MC has an exciting opportunity for a Shop Assembler to join our Brands department. For over 35 years, Rocky Mountain ATV/MC has grown to become one of the world's largest providers for power-sport enthusiasts - having the largest selection of riding gear and parts available. Rocky Mountain ATV/MC is not just a distributor, we are also gear testers, product developers, manufacturers of off-road parts/components, and one of the motorsports industries leading resources for instruction and demonstration. There has never been a better time to start your career with us! In 2021, Rocky Mountain ATV/MC became a 100% Employee-Owned Organization. Come join us as an Employee-Owner and work with the best in a fast paced, exciting industry. Do you love motorsports? Do you want to work for a company with a fun and rewarding environment? Rocky Mountain ATV/MC is that company, we are comprised of motorsports enthusiasts just like you. We currently have amazing opportunities for dynamic and dependable individuals who want to share their passion and experience. GET READY. As a colleague at Rocky Mountain ATV/MC, you can enjoy benefits and perks including: Employee Stock Ownership Program (ESOP) Competitive compensation with regular bonuses Excellent tuition reimbursement, graduation bonus and ZERO interest education loans for all employees Delicious onsite cafeterias with discounted meals Excellent Medical, Dental, Vision, and Voluntary Life insurance plans 401K with company match PTO and holiday pay Wellness programs and discounted local gym membership Motorsport and wellness race/participation reimbursements Generous employee discount on thousands of products Career advancement, professional development, and opportunities to grow What you will do in this role: Assemble Products: Follow detailed instructions to assemble products or parts. Inspect Products: Ensure assembled products meet quality standards. Package Products: Prepare completed products for shipment, including labeling and verifying order accuracy. Maintain Work Area: Keep work areas clean and safe, adhering to health and safety regulations. Report Issues: Notify supervisors of any malfunctions or defective parts. Perform Quality Checks: Conduct quality checks on packaged items before distribution. Work collaboratively and cooperatively with others, committing to a workplace of teamwork, dignity, and respect How you will thrive in this role: Must be 18 years or older Follow complex packing instructions Basic reading and writing skills Knowledge and respect of shop safety Able to perform physically demanding work Must be punctual and possess a strong work ethic Ability to understand, read, and/or comprehend instructions and directions including different numbers and specifications Must be able to work scheduled shift hours Be a collaborative team player who is willing to work with others and independently Strong work ethic focused on commitment, pride of work, quality, desire to learn, and dependability Schedule: Monday - Friday 7:00am-3:30pm Physical Requirements: Position performance will require the regular physical ability to walk and function in elevation changes by the means of self-propulsion, to include steps, ladders, and varied walking and working surfaces. Ability to negotiate warehouse work areas in a safe manner and behavior. Vision abilities specific to the position will include close vision, peripheral vision, depth perception, and the ability to focus. Performing in this role will require the use of hands to use and handle tools, objects, materials, and controls. Performance requires the frequent ability to sit, talk, hear, stand, climb, balance, stoop kneel, crouch, or crawl. Employee will need to be able to read, write, and understand basics of the English language. Employee may have to lift and/or move up to 25 pounds and up to 45 pounds assisted or if capable. Equality: Rocky Mountain ATV/MC is proud to be a company of inclusion, belonging, and fairness. We rely on our colleagues to collaborate, have a voice, and perspective. We embrace everyone and are proud to be an equal opportunity employer that does not discriminate on the basis of race, color, ethnicity, ancestry, religion, sex, national origin, sexual orientation, age, citizenship status, marital status, disability, gender identity/expression, veteran status, or genetic information or any other category protected under applicable law. Requirements:

Job Description Who We Are Through its global network, Thermon provides safe, reliable and innovative mission critical industrial process heating solutions. Thermon serves the energy, power generation, chemical, food and beverage, commercial, rail and transit and other industries to provide innovative solutions for industrial heating applications by deeply understanding our customers' needs. We specialize in providing complete flow assurance, process heating, temperature maintenance, freeze protection and environmental monitoring solutions. We transfer the WARMTH needed to make life Work. At Thermon, we don't just create jobs; we develop careers. Thermon has become a global leader in industrial heating due, in no small part, to our employees' hard work and dedication. To help foster those employees, we've created a company culture that encourages our values of Care, Commit and Collaborate. We are currently recruiting for an Assembler Overview As an Assembler you will be responsible for assembling heated blankets by reading and interpreting technical drawings, assembling components, and performing quality checks to ensure that the heated blankets meet specified standards. Key Responsibilities and Accountabilities include Assemble heated blankets according to technical drawings and specifications. Use hand tools, power tools, and specialized equipment to fit and secure components. Install heating elements, sensors, and insulation materials. Inspect assembled products for defects and ensure compliance with quality standards. Perform functional tests on heating elements and electronic components. Report any assembly issues or discrepancies to the supervisor. Read and interpret blueprints, schematics, and work orders. Follow detailed assembly instructions and protocols. Understand and apply industry standards and safety regulations. Maintain accurate records of assembly processes and quality checks. Complete production logs and other required documentation. Perform routine maintenance on assembly tools and equipment. Keep work area clean and organized. Work closely with the production team to meet daily and weekly production targets. Communicate effectively with supervisors and team members about production status and any issues that arise. Assists other areas if ahead on the schedule. Complete any other tasks assigned by management or Production Floor Manager. Key Characteristics, Competencies and Skills Ability to work in a fast pace environment Perform repetitive work on a manufacturing team Follow procedures and policies Work overtime when necessary Make suggestions and implement ideas to become more efficient Reliable Problem solver Show initiative. Flexible in moving to work to another area when needed. Work on machinery if needed. Be a team player Notifying your line lead of any issues that prevent you from performing your job. Being back on time from scheduled breaks. Being on time to team huddles after scheduled breaks. Being flexible to train and work in other areas. Clean up workstation/work area during clean up time. Must be able to understand and communicate in English. Physical Demands Transporting blankets as needed. Standing for extended periods (9+ hours). Lifting loads weighing up to 50 lbs. Qualifications High School and or trade school is a plus but not required. One year of related experience in a fast-paced business environment is a plus.

Description Join a team where your hands-on skills help build the future. As a Modular Assembler at RK Steel, you'll work in a dynamic shop environment assembling and fabricating structural components for innovative modular systems. From reading blueprints to operating tools and machinery, your attention to detail and commitment to safety will play a key role in bringing projects to life. If you're experienced in fabrication and take pride in quality work, this is a great opportunity to grow alongside skilled professionals while working on high-impact projects. If you thrive in a fast-paced, team-oriented setting, we want to hear from you. RK Company Overview As a second-generation, family-owned enterprise, RK Industries, LLC (RK) offers a diverse range of construction, manufacturing, advanced fabrication and building services. Led by Rick and Jon Kinning, RK represents seven distinct lines of business that work together to provide seamless project collaboration. Our exclusive building methodologies, accredited safety standards and professional execution allow us to turn our customers' greatest concepts into reality. Position Summary The primary role of the Modular Assembler is to perform duties required to facilitate the assembly and fabrication of modular components. This role includes constructing modules using conduit, insulation, sheet metal, and structural framing. Modular Assemblers will be required to work in a shop environment, operate a variety of hand and power tools, and follow all safety protocols and workplace procedures to ensure the delivery of high-quality, precision-built systems. 1st Shift/Days: Monday-Thursday 5am-3:30pm 2nd Shift/Nights: Monday-Thursday 2:30pm-1:00am Role Responsibilities • Read and interpret blueprints, drawings, and work orders to meet project specifications • Measure, cut, and assemble modular framing and components • Assemble and install conduit, insulation, sheet metal, and structural elements • Join materials using screws, bolts, adhesives, and welding techniques • Measure, cut, or shape steel, wood, and other construction materials • Construct framing systems, interior partitions, and support structures • Operate forklifts, overhead cranes, and trade-specific machinery • Position and install parts and subassemblies using hand tools, power tools, and hoists • Inspect and document product compliance and report defects • Maintain cleanliness and safety in the shop area • Accurately take measurements and calculate material needs • Perform equipment troubleshooting and preventive maintenance • Train new employees and support continuous improvement efforts • Interpret job orders and execute work instructions • Handle materials and track production metrics • Perform other tasks as assigned Qualifications • High School Diploma or equivalent • Post-secondary training or technical certification is a plus • Hands-on experience in fabrication, modular assembly, or construction • Ability to operate equipment in a safe and responsible manner • Effective communication and time management skills • Strong mechanical aptitude and tool knowledge • Ability to read blueprints, schematics, and technical diagrams • Knowledge of appropriate materials, fabrication methods, and safety practices • Ability to identify defects and maintain quality control • Ability to work independently and complete tasks on schedule • Familiarity with construction and fabrication techniques • Must be able to work safely and efficiently in a shop environment • Knowledge of First Aid, CPR, and hazard identification is a plus • Knowledge of workplace safety practices, PPE, and safe lifting procedures Minimum Physical Requirements and Accountability • Work predominately inside and in dusty and noisy areas • Work in high places, tight places, and confined spaces • Climb, balance, squat, kneel, and crouch • Stand for long periods of time • Lift and carry 51 to 75 lbs. occasionally, 31 to 45 lbs. frequently, and up to 22 lbs. constantly • Use of Personal Protection Equipment will be required (e.g. safety glasses, gloves, boots, etc.) • Regularly work near moving mechanical parts and in variable temperatures • Must be able to lift, push, pull, or carry objects safely over time • Comply with all company policies and procedures • All employees are accountable for safety and empowered to stop work if unsafe conditions are present • RK employees and subcontractors are required to complete and maintain all safety and health training requirements including RK Orientation, shop-specific orientation, CPR/First Aid/AED/Bloodborne Pathogens, Hazard Identification and Reporting, and OSHA 10 What Sets RK Industries Apart Safety: Our unmatched culture of safety is our foremost core value, guiding everything we do each day: Health, Safety, & Environmental Awards: Whether in Construction, Manufacturing, Fabrication, or Service, RK Industries is highly recognized and accredited throughout the industry: Accreditations & Recognition Benefits: RK Industries offers competitive benefits to support your growth and well-being: Benefits & Rewards Philanthropy: RK Industries not only builds our community through our projects, but also invests in it by supporting local services for over a decade through the RK Foundation: RK Foundation Development: Through RK University, we provide hands-on training and development opportunities that empower employees to advance their careers and grow within the company, to include leadership and technical learning opportunities, we well as our accredited apprentice program: RK University & RK Apprenticeship Program Applications are accepted on an ongoing basis . RK Industries, LLC is an equal opportunity employer. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, sexual orientation, gender identity, disability, protected veteran status or any other status protected by applicable law

TriSalus is seeking an Assembler 1 to join our production team, supporting a growing and innovative medical device organization. This role will be a part of a team creating and building a portfolio of our medical devices. TriSalus is looking for detailed oriented individuals who want to be part of an amazing team. Duties and Responsibilities: Assemble components, subassemblies and final assemblies. Package assemblies. Complete training on the approved assembly and testing methods. Assemble components, subassemblies and final assemblies in accordance with approved operation procedures and travelers. Document activities in accordance with operation procedures and applicable general operating procedures. Maintain personal health and cleanliness in accordance with applicable general operating procedures. Maintain work area and local environment in accordance with applicable general operating procedures. Assure that all measuring instruments that are used are within calibration limits. Assure individual and group safety when conducting all activities. Maintain effective communications with supervisor and peers in daily activities. Qualifications Education & Certifications: High school diploma preferred. Work Experience: 1 - 3 experience working in a medical device manufacturing environment. Knowledge, Skills & Abilities: Able to read, write and understand English. Able to use a microscope and operate machinery. Physical Requirements: Able to work in an industrial environment. Work in Westminster Colorado Shifts 6:30 am - 5:00 p.m. (4 day work week with Friday off)

Job Details Entry Henderson, CO Full Time High School $20.00 - $24.00 Hourly DayAssembler - Setup Merritt Trailers, Inc. is family owned/operated and professionally managed. Merritt isn't just a place to work; it's a place to contribute your talents and take pride in a job well done! With more than 70 years of representing the quality standard by which all livestock semi-trailers are judged, we know how to value each and every associate, empowering them to create and innovate solutions for our customers and community. We are looking for strong, standout candidates, with the desire and motivation to elevate themselves and our organization. If you are passionate about making a difference and being part of an exceptional team that is shaping the future, we encourage you to apply today! Benefits Package: • 401(k) with company match • Seven paid holidays, and one floating holiday yearly • Medical, dental, and vision insurance • Health Savings Account option • Company paid life insurance • Voluntary short term and long-term disability • Vacation and sick time that begins accruing upon hire • Access to our Employee Referral Bonus Program • Wellness Program- we want our employee to live healthy lifestyle and provide an annual health fair screening • Access to our Annual Safety Boot Reimbursement Program • Access to our Bi-Annual Prescription Safety Glasses Program • Company issued uniforms Assembler and Fabricator We are in search of an experienced individual to assemble products such as end sheets and side sheets. The ideal candidate will be competent in building Livestock, Commodity, and Gooseneck trailers from raw materials. Responsibilities: • Build assemblies by interpreting work orders, production orders, and blueprints. • Cut raw materials to length depending on specifications using a tape measure and portable power saw. • Position parts according to knowledge of unit or following blueprints. • Fasten parts together with bolts, screws, hucks, rivets, etc as required by specs. • Drill or ream rivet holes as needed, align parts, and inserts rivets. • Lift raw materials, final products, and items manually (up to 51 pounds). • Check work against quality standards and sign off on Quality Sheet. • Ensure work is done safely and meets quality standards. • Keep work areas clean and organized and take proper care of all equipment and facilities. • Follow all company rules and polices. • Provide a great level of attention to detail. • Follow all safety rules and quality standards. • Work with team members to maximize productivity and efficiency. Qualifications Knowledge and Skills for this Position: • Knowledge of manufacturing production line preferred. • Ability to read and interpret blueprints and/or drawings. • Ability to use calipers, tape measures, and angle gauges proficiently. • Ability to operate drills, huck gun, mono gun, rivet gun, grinders, saws, and various other hands proficiently. • Knowledge of raw materials, production processes, quality control, and costs to maximize effective manufacture and distribution of goods. • Ability to perform simple shop math, convert decimals to fractional equivalents and fractions to decimal equivalents. • Ability to produce quality products consistently. • Knowledge of safety standards and willingness to use protective clothing (face shields, gloves, etc.). • Deftness and attention to detail. • Ability to follow verbal and written instructions. • Must be reliable, with a strong work ethic and desire to contribute to a team. • Willing to work 40+ hours weekly. Requirements: • Experience with hand tools in a manufacturing environment required. • Ability to pass a pre-employment drug screening is required. • Random drug testing required after employment. Merritt Trailers, Inc. is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, or protected veteran status.

Production Associate (1st Shift) WHAT BROUGHT YOU HERE: Total compensation pay $18 Monthly bonus opportunities Quarterly safety bonus opportunities Weekly Pay Shift Days and Hours: Monday - Friday Benefits starting DAY ONE! WHAT YOU WILL BE DOING: Move glass from tables, furnace, rolling racks, delivery trucks, or wood crates for eight or more hours, daily Transport of materials including glass from one position/location to another in an effort to expedite the production process Working in all areas of production as needed Inspect product for any abnormalities and notifying supervisor immediately of any issues (fabrication issues, logo placement, etc.) SKILLS YOU BRING: Must be at least 18 years old Lift 75lbs unassisted & up to 150lbs with assistance Ability to read, understand, and communicate paperwork and labels Ability to read and interpret basic mathematical measurements and effectively use a tape measure Understand layout of the facility to ensure proper product flow Perform different job functions on a rotating basis Experience in the glass industry a plus! WHY TRULITE: Trulite offers the most comprehensive benefit coverage in the industry. We give our employees immediate access to health, dental, vision and life insurance benefits, as well as provide short/long-term disability coverage to protect you financially if injured on the job. We are pleased to offer a comprehensive wellness initiative that includes access to a percentage of your pay daily, if needed, and a progressive financial training program. Stay with us for a year and your 401k employer match is 100% vested and immediately becomes part of your ever improving financial plan. This is also true for those who select and contribute to their Health Savings Account. We match on both employee and family coverage to help cover out-of-pocket expenses and if unused continues to grow until needed. The employer match for your HSA, if you choose to participate, is also vested immediately at 100%, improving your financial health. Trulite bears most of the cost of your benefits. We structured these benefits because we care not only about your physical well-being but your financial health and welfare too. Let us show you why Trulite values you as an employee and how we will help you achieve financial independence. We are an Equal Opportunity Employer. We embrace and encourage our employees' differences in age, color, disability, ethnicity, gender identity or expression, language, national origin, physical and mental ability, political affiliation, race, religion, sexual orientation, socioeconomic status, veteran status, and other characteristics that make our employees unique.

Hunt Electric, Inc. and ICC of Salt Lake City, UT is searching for a full-time Skilled Assembly Technician to join our team within the Instrument Control Division. This full-time Skilled Assembly Technician involves precisely building complex electrical panels and equipment from components using blueprints/schematics, using hand/power tools, and testing units. This requires strong attention to detail, problem-solving, mechanical aptitude, quality focus, and teamwork. We are looking for someone with responsibilities spanning assembly, quality checks, documentation, and sometimes minor repairs. Major Duties: Strong reading comprehension, attention to detail and organized. Ability to read schematics and diagrams on installation of parts, wire, and components. Ability to test and troubleshoot with a meter for accuracy. Maintain appropriate work appearance: Work pants worn in a conventional manner with no tears. Work boots. Possess knowledge of basic hand tools and ability to use and care for them. Ability to meet deadlines. Ability to route wires neatly Proficient in basic math (algebra) Proficient in all types of measuring tools as required. Proficient in using computers to obtain and document information. Actively contributes to a positive team environment. Demonstrates dependability with regular attendance and compliance to scheduled work hours. Other duties or locations as assigned by Manager. Minimum Qualifications: Ability to stand for long periods of time. Ability to lift 50lbs to 100lbs. Must be willing to work overtime and/or weekends when needed. High School Diploma or equivalent. This full-time Skilled Assembly Technician position receives a competitive wage commensurate with experience and position responsibilities. As a full-time employee, you would also be eligible for an excellent benefits package, including medical, dental, life insurance, short-term and long-term disability, a 401(k) plan, and paid personal time (PTO). At Instrument Control Center (ICC), we are industry leaders in manufacturing controls panels & energy houses "E-house", driven by innovation, quality, and excellence. Our team is passionate about creating top-tier products that make a difference in the lives of our customers. We believe in fostering a dynamic and supportive work environment where every team member can thrive and take their career to the next level. ABOUT HUNT ELECTRIC, INC. Hunt Electric, Inc. is a full-service electrical, technology, and infrastructure contractor with wide-reaching services available to all types of markets. With licenses in eight states and offices in Salt Lake City, St. George, and Denver, we have continued to lead the industry across the Inter-Mountain West since 1986. Our turn-key services range from design-build engineering to construction and maintenance. With eight in-house divisions, an on-site prefabrication department, in-house licensed engineers, a fully trained and specialized workforce, and 24-hour on-call service, Hunt Electric ensures our clients' projects are successful from start to finish - and beyond. WORK SCHEDULE This is a full-time position with a typical working schedule of Monday - Thursday, 6:00 am - 4:30 pm, off on Fridays.

Job Description Leather Worker Must live in Colorado, specifically, in or near the Denver Metropolitan area. This is an onsite position. Hours: M - F 7:30 AM - 4:00 PM Our Company: The Hunter Company has been building top quality leather scabbards, holsters, rifle slings, belts & accessories for over 70 years. Our products are made right here in Colorado by a team of talented leather craftsmen and women. Here at Hunter Company, we strive to provide the very best for our customers and look forward to many, MANY more years of service. Hunter believes in keeping our team close. We care for one another and continue to provide the 2nd amendment-loving community with the finest leather holsters, slings, and accessories made right here in America. The Work: We are seeking a highly motivated individual who holds themselves to high standards when it comes to quality and innovation. We need a creative and skilled individual to assemble custom leather holsters and help assist warehouse manufacturing needs. We are a fast-growing company ensuring the opportunity to those with the motivation to take initiative and learn new skills to advance within the company. The right candidate will train with a leather craftsman who will guide you to be a versatile, skilled leather craftsman. Qualifications: Manage production of Hunter leather goods. Cut, shape and mold top grain leather holsters. Operate machinery, assembly tools, and equipment. Sewing experience is a plus. Problem Solve issues that arise during production. Meet established time guidelines for various steps and projects. Perform quality control inspection of finished products. Utilize provided safety equipment and adhere to best practices. Communicate well with the team regarding holster models to fit specific guns. Must have a reliable source of transportation. Previous experience in manufacturing, assembly, or other related fields. Experience with holster making and working with leather is a plus, but willing to train the right candidate. Job type: Full time Experience: Leather experience: 1 year preferred Firearm Knowledge: Preferred Job Type: Full-time Salary: $18.00 - $20.00 per hour Experience: Leather: 1 year (Preferred) Manufacturing: 1 year (Preferred) Additional Compensation: Health, dental, vision, LT disability, and life insurance available after 90 continuous days of employment. Work Location: One location This Job Is: Military experienced candidates are encouraged to apply. Schedule: Monday to Friday

10205 Federal Drive, Building B Colorado Springs Colorado 80908 Why Valmont We're Here to Move the World Forward. Valmont impacts millions of people around the world every day, yet they might not realize the many ways. Our technology is helping feed the growing population, supplying the world with more reliable energy and access to renewables, enhancing connectivity in remote and urban locations to create a sustainable future and so much more. Simply put, Valmont is advancing agricultural productivity and reimagining vital infrastructure to make life better. Join a Fortune 1000 company that respects hard work, honors diversity and invests in our employees as we focus on creating the world of tomorrow, today. We are the modern workforce . Are you ready to move the world forward? Apply now. Produces components by assembling parts and subassemblies. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Prepares work to be accomplished by studying assembly instructions, blueprint specifications, and parts lists. Positions parts and subassemblies by using templates or reading measurements. Assembles components by examining connections for correct fit, fastening parts, and subassemblies. Verifies specifications by measuring completed components. Maintains a safe and clean working environment by complying with procedures, rules, and regulations. Documents actions by completing production and quality forms. Contributes to team effort by accomplishing related results as needed. Work with a sense of urgency without sacrificing safety or quality. Hand sanding with an electric or air-powered sander may be required on occasion. Packages finished goods for shipment and pulls finished goods for shipment. May operate a shrink wrap machine, pallet jack, and forklift on occasion. Competencies Ability to consistently handle and follow through with multiple assignments and meet deadlines; ability to be flexible and adaptable to changing priorities; ability to function effectively in a busy work environment. Excellent attention to detail, professional attitude, and reliability. Must possess strong communication skills, organization skills, ability to prioritize, and be detail-oriented. Effective verbal and written communication skills. Persistent follow-up. Education *Work experience may be substituted for educational requirements* Required: High School Diploma or GED. Work Experience Preferred: 1 year of manufacturing/warehouse experience Benefits Valmont offers employees and their families a comprehensive Total Wellbeing benefit package to ensure their individual and family's overall wellness needs are met. Some offerings are dependent upon the role, work schedule, or location and can include the following: Healthcare (medical, prescription drugs, dental and vision) 401k retirement plan with company match Paid time off Employer paid life insurance Employer paid short-term and long-term disability including maternity leave Work Life Support Tuition Reimbursement up to $5,250 per year Voluntary programs like tobacco cessation, Type 2 diabetes reversal, one-on-one health coaching, mortgage services and more Valmont does not discriminate against any employee or applicant in employment opportunities or practices on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, genetic information, veteran status, disability or any other characteristic protected by law. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. If you have a disability and require any assistance in filling out the application for employment email *************************. 2025-12-16

The Primal Pet Group includes manufacturers of fully prepared, human-grade raw foods, treats, and supplements for dogs and cats. The Primal Pet Group was founded with the goal of improving the quality of life and overall health and happiness of pets through wholesome raw foods that mimic the diet of animals in the wild. We are looking for reliable, motivated, pet companions to join our fast-paced, growing team in Olathe, Colorado. Responsibilities Operation of industrial Belt Sander according to instructions Safety first mindset Able to lift 50 lbs. Set up machinery for operation. Troubleshoot issues and perform maintenance. Perform quality control. Reporting and recordkeeping Change sanding belt according to instruction. Clean machinery Ability to lift heavy equipment, to bend, and to stand or walk for long periods of time. Regularly conduct tests of the machine's performance and operating capacity. Other duties as assigned. Punctual and Regular Attendance Required Qualifications and Skills Less than high school education; at least 3 months related experience or training; or equivalent combination of education and experience. Ability to read a limited number of two- and three-syllable words and to recognize similarities and differences between words and between series of numbers. Ability to print and speak simple sentences. Ability to add and subtract numbers and to multiply and divide and understand percentages. Ability to perform these operations using units of weight measurement and quantity measurements. Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. While performing the duties of this job, you will be required to stand and walk, use hands to feel, and reach with arms. Occasionally required to sit and talk or hear. Required to lift to 25 pounds and occasionally lift and/or move up to 50 pounds without assistance. Additionally, you must be able to lift and or move more than 50 pounds with assistance. Specific vision abilities required by this job include peripheral vision. You will be regularly exposed to moving mechanical parts, extreme cold, wet environment, and vibration. The noise level in the work environment is usually loud. We offer great benefits and perks. Paid Time Off Paid Company Holidays Competitive medical, dental, vision, and supplemental insurance Discounted pet insurance 401k with matching after 1 year Career growth opportunities and training Primal Pet Group is a Drug Free Workplace and an Equal Opportunity Employer. Please review our Employment Privacy Policy here: ********************************************************* By submitting an application with us, you acknowledge that you have read and understand this policy.

Kelly Services, Inc. is a Fortune 500 company headquartered in Troy, Mich., providing employment to more than 700,000 employees annually, with skills including office services, accounting, engineering, information technology, law, science, marketing, light industrial, education, health care and home care. Kelly Services is an Equal Opportunity Employer. Job Description For 60 years, Kelly Services has provided outstanding employment opportunities to the most talented individuals in the marketplace. Today, we are proud to offer a full time contract Assembly Worker position for a top Medical Devices and Supply Company located in, Boulder, CO. Position Description: •Responsible for hands on assembling of electrical and mechanical sub and final assemblies while following safe work practices. Requirements: •With or without manufacturing experience •High School Diploma or GED required Shifts: •3rd: 10:00PM - 6:30AM (weekends off) •12 hour shift ◦6AM - 6PM (various days off) ◦6PM - 6AM (various days off) This position is recruited for by a remote Kelly office, not your local Kelly branch. To be considered for this position, you must submit your resume to marc595 @kellyservices.com. If you have questions about the position, you may contact Jin Pengson the recruiter for this position at 303-997-0290; however your resume must be received via email or submit resume button included within. Qualifications With or without manufacturing experience High School Diploma or GED required Additional Information BENEFITS: •Immediately eligible for our optional Health Benefits, including Medical, Dental, Vision, Prescription Drug Coverage, Short-Term Disability and Group Life Insurance •Vacation and Holiday Pay •Access to our company Learning Center for training and career development •Weekly pay through our electronic pay programs (via direct deposit or pay card) Apply now!