Assembly line worker jobs in Lake Grove, NY - 47 jobs

Hi- Rel Solder Hi-Rel Solder Assembler to join our manufacturing team. The successful candidate must have 2-3 year's experience. Perform precision hand soldering of surface-mount and through-hole components to IPC Class 3 standards. Responsible for assembling and soldering high-reliability printed circuit boards (PCBs) and sub assemblies in accordance with industry standards such as IPC J-STD-001, IPC-A-610. The candidate should have working knowledge of Operating soldering equipment, microscopes, and other assembly tools. Must be able to read and interpret assembly documents and engineering drawings. Education and Required Skills - High School diploma or equivalent and 2+ years in PCB or electronics assembly, preferably in a Hi-Rel or relative environment. - Proficiency in soldering to IPC J-STD- A-610 Class 3 standards. - Certification in IPC J-ATD-001 and/or IPC-A-610. - Experience in working under a microscope and magnification and with fine-pitch components. - Familiarity with ESD protection procedures. - Ability to read and understand technical documents and drawings. - Excellent attention to detail and manual dexterity. Strong computer and written skills is a PLUS, willing to train an enthusiastic applicant willing to learn a new skill. We offer a comprehensive benefit package including: Health Insurance, Dental Insurance, Vision, Life Insurance, Short Term Disability, Long Term Disability, Flexible Spending Option and 401K. We also offer Paid Time Off including: Vacation, Sick and Paid Holidays.

Reports to: Operations Manager Status: FLSA Non-Exempt (hourly) Essential Duties and Responsibilities: To perform this job successfully, an individual must be able to perform each essential job duty in a satisfactory manner. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Sensor & Harness Assembler: * Under the direction of the Production Supervisor and/or area lead, performs bench-type electromechanical assemblies and sub-assemblies, using small hand tools, and electronic and pneumatic tooling, following established methods and procedures. * Advanced soldering skillset required. * Detect and report defective materials or questionable conditions to the department supervisor. * Maintains the work area and equipment in a clean and orderly condition and follows prescribed safety regulations. * Must take the necessary precautions to protect yourself and co-workers by using proper safety equipment and guidelines. * Must be able to read and interpret schematics and wiring diagrams * Must be able to read and interpret work instructions, SOPs, and other applicable material * Continuity Checking and Reading * Must be able to push, pull, and lift at least 20 lbs. * Performs prescribed preventative maintenance on machines as required per the P.M. charts. * Participate in Training as required * Uses all appropriate personal protective equipment (PPE), depending upon job task. * Must be a "US Person" as defined by US Govt. and able to work without restriction with ITAR related data Repair Station/MRO Assembler: * Test and calibrate parts. * Accurately read blueprints. * Demonstrate proper use of simple hand and machine tools. * Demonstrate proper use of electrical/mechanical measuring devices. * Accurately read and follow procedures, routing and other work instructions. * Uses all appropriate personal protective equipment (PPE), depending upon job task. * This position may require exposure to information which is subject to US export control regulations, i.e. the International Traffic in Arms Regulations (ITAR) or the Export Administration Regulations (EAR). All applicants must be U.S. persons within the meaning of U.S. regulations. * Responsible for quality. * Meet customer deadlines. * Responsible for building parts that meet customer expectations. Education and Experience: * Minimum of high school education or GED. * Must have two years of progressive experience assembling aerospace components or other smaller manufacturing products requiring moderate technical ability. * Strongly prefer current or prior IPC or JSTD aerospace soldering certification. * Must be able to read and understand English (in writing and verbally). Job Knowledge, Skills and Abilities: * Use and be familiar with all assembly and measuring tools, interpret visual aids, use of basic shop math. * Must be able to perform, but not limited to the following operations necessary to build a flexible cable assembly and/or a rigid T/C assembly: make bulk cable, cut and strip wire, mark, pot, crimp, form and bend, assemble for braze, cap junction, layout, assemble connectors, swage, braid, assemble hardware, coil, x-ray, in-process test and pressure test. * Proficient in use of electrical test equipment and inspection tools. Physical Demands: * Position requires sitting or standing, reaching and moving about the plant. * Must be able to lift up to 20lb, unaided. * Position requires constant use of hands, including grasping, twisting, holding, gripping, or manipulating tools and equipment. * Employees may be subject to random drug and alcohol testing under FAA regulations. Work Environment: * Work performed in a manufacturing environment. * Exposed to any number of elements but with none present to the extent of being disagreeable. * May work at different workstations as production needs require, or shifts from one station to another, during the assembly process This position requires either a US Person (as defined in applicable export regulations) or a non-US Person who is eligible to obtain the required export authorization. To conform to U.S. export control regulations, applicant should be eligible for any required authorizations from the U.S. Government. The above information in this description has been designed to indicate the general nature and level of work performance by employees within this classification. It is not designed to contain or be interpreted as a comprehensive inventory of all duties, responsibilities and qualifications required of employees assigned to this job. To perform this job successfully, an individual must be able to perform each essential job duty satisfactorily. Reasonable accommodations may be made to enable qualified individuals with disabilities to perform essential job functions. Hourly pay depends on experience and qualification of applicant. HarcoSemco offers: a competitive hourly rate in addition to Medical, Dental, Vision, Basic Life Insurance, 401k and Pad Time Off. For more information on benefits please visit ******************************* HarcoSemco provides equal employment opportunities to all individuals regardless of their race, color, creed, religion, gender, gender identity, age, sexual orientation, national origin, disability, veteran status, pregnancy, or any other characteristic protected by state, federal, or local law. HarcoSemco takes affirmative action to ensure that applicants and employees are treated fairly without regard to any protected characteristics. Discrimination of any type will not be tolerated.

Join the 125-year legacy of Potter Electric Signal Co. Potter has been a part of the St. Louis community since 1898 and we are very proud of our rich history in the fire and life safety industry. Potter's mission is to be the "Symbol of Protection" for fire and life safety solutions worldwide by combining the latest technology in fire protection with the dedicated manpower for which we have been known for over one hundred years. Our vision is to provide industry leading quality solutions, products and services for the protection of life, property and the environment. With unwavering dedication to our customers, Potter looks to continue as the industry standard in both product and service with increased focus on international expansion. Each employee at Potter takes great pride in knowing that every product we assemble, service, and sell is for the purpose of saving lives around the world. We strive to provide employment opportunities to those individuals who are performance driven, team players, take pride in their work, and are enthusiastic and passionate about their job. Potter Global Technologies and our private equity firm, KKR, value our employees and all that they do. KKR offers a unique benefit and opportunity for all employees to participate in an ownership program of Potter Global Technologies. Being a co-owner allows each employee to play a more direct role in the business itself and reap the financial benefits of the Company's success. FLSA Status: Full-Time Hourly Non-Exempt Department: Assembly Reports To: Production Supervisor Summary of the Position The Assembly Technician position is an essential role on our manufacturing team. This position focuses on the assembly of parts and components for all Potter Global Technologies products. It is important that this position understands the importance of high quality and meeting industry standard specifications. Essential Functions Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Increase consistency in operations through the ability to read and follow written instructions from an operation manual when assembling products. Use hand tools such as pliers, screwdrivers, box cutters and power tools to craft Potter Global Technologies products. Complete packing operations by packaging parts into cartons and taping boxes using auto tape dispensers. Serve as a partner to the Quality Control Team by ensuring all standard operating procedures and work instructions are followed. Actively create a safe and secure work environment through adhering to all company safety measures. Contribute to a collaborative environment by proactively resolving conflicts and being a supportive team member. Collaborate with manufacturing leaders to accept feedback in an effort to increase performance and product quality. Performs other duties as assigned. Qualifications Required Abilities and Qualifications Ability to conduct repetitive movements of lightweight parts (up to 10 pounds/part) Time management skills with a proven ability to meet deadlines. Able to interact with others in a respectful and collaborative manner. Adequately read and follow written instructions from an operation manual. Work Environment/Physical Demands/Travel This job operates in a warehouse/manufacturing setting where hand tools and parts are used to assemble products, such as pliers, screwdrivers, box cutters, power tools, screws, automatic tape dispensers. This position is largely a standing role. Must be able to lift up to 30 pounds at times. Must be able to access and navigate each department at the organization's facilities. Required Qualifications Movement of pallets containing completed parts using a pallet jack. Some operations require computer entries and must be accurate. Assembly Technician workers are required to rotate from job to job occasionally. Assembly Technicians may need to stand for an entire 10-hour shift (with breaks.) Some areas offer both sitting and standing. Prior experience in a warehouse/manufacturing setting using tools to assemble small items is preferred. Please note this job description is not designed to cover or contain a comprehensive listing of activities, duties or responsibilities that are required of an employee for this job. Activities, duties and responsibilities may change at any time with or without notice.

Benefits: 401(k) 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Vision insurance AssemblerVJ X-Ray LLC is the global leader in developing and manufacturing integrated x-ray sources and high voltage generators. Our mission is to be uncompromising in pushing the boundaries of component design and manufacturing for every OEM partner. This key position is responsible for assembling electronic components to specifications while meeting production schedules, performance and quality standards. This position requires reliability, task flexibility and the ability to follow instructions. : • Utilize bill of material, written or verbal instructions to assemble or re-work x-ray source components and high voltage generators • Work from schematics or assembly drawings to modify subassemblies, as required • Performs miscellaneous duties that include assisting other areas of production and quality assurance • Prepare completed products for shipment • Safety Sensitive Position Essential Skills: • High School Diploma • General understanding of electronic assembly procedures • Understanding of ESD practices • Ability to read and work from electrical prints • Proficiency in circuit boards and soldering • Familiarity with assembly tools and equipment • Minimum two (2) years manufacturing or assembly experience • Ability to work as part of a team • Must be authorized to work in the U.S. • Will need to successfully pass a personal background check and drug screenings Non-Essential Skills: • Minimum two (2) years of full-time experience with proven reliability, preferably in a technical, manufacturing or research and development environment • Experience in safe work environments and maintaining compliance with state and federal regulations • Prior experience soldering through-hole and SMT components • Ability to use a multi-meter to test and troubleshoot AC/DC circuits Physical & Mental Demands: • Regularly required to sit, walk, bend, stoop and stand within an industrial environment • Will need to repeatedly use hands & fingers to operate basic office equipment and operate hand and power tools standard to a production environment • Responsibilities could require lifting, moving, staging, and placing of materials up to 50 pounds alone and heavier with assistance • Vision abilities required for this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus • Must be able to fulfill essential job functions in a consistent state of alertness and safe manner. • On a regular basis, will be required to: o use written and oral communication skills o read and interpret data, information and documents o be creative, make judgements, use reasoning and make decisions o observe and interpret situations o learn and apply new information or skills o perform detailed work on multiple, concurrent tasks o work under intensive deadlines with frequent interruptions o interact with internal and external customers holding positions from a wide array of disciplines and organizational hierarchy levels • May need to communicate and effectively manage dissatisfied or frustrated customers and/or interface with difficult/demanding individuals This job description is not all inclusive and is subject to change at any time. VJ X-Ray LLC provides equal employment opportunity to all individuals regardless of their race, color, creed, religion, gender, age, sexual orientation, national origin, disability, veteran status, or any other characteristic protected by state, federal, or local law. The company takes affirmative action to ensure that applicants and employees are treated during the application process and post hiring employment without regard to any of these characteristics. Discrimination of any type is not tolerated. Compensation: $20.00 - $22.00 per hour We are an equal opportunity employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability status, protected veteran status, or any other characteristic protected by law.

Pay Range: $18-21.75 Seeking motivated individuals who are looking to join a fast paced - growing organization to work in the production department doing: * Mechanical assembly of raw materials * Utilize different hand tools * QC Inspections Requirements: * A minimum of a high school diploma /(GED) * 1-3 years prior assembly experience (able to use small tools ie torque wrench) * Ability to read blueprints, drawings and schematics is a plus. * Must have the ability to lift 30 lbs. * Must be able to work overtime. * *Must be able to stand the duration of an 8 hour shift.* * 7:00am - 3:30pm shift (30 minute lunch) What You Will Do: * Blueprint Interpretation: Read, interpret, and follow blueprints, diagrams, engineering drawings, specifications, bills of materials, and other written instructions to accurately assemble products. * Tool Operation: Operate hand tools, electrical tools, hand cutters, measuring equipment, and light equipment efficiently and safely. * Inventory Management: Maintain an organized inventory of products in work stations to ensure smooth workflow. * Quality Assurance: Perform quality work checks, identify product defects, and record any identified defects for further analysis and correction. * Rework and Repair: Rework and/or repair assembled equipment and products according to engineering specification changes. * Safety and Cleanliness: Perform all work in accordance with quality standards and established safety procedures. Maintain a clean and safe work area. * Physical Requirements: Ability to lift up to 30 lbs and work in a standing position for up to 8 hours per day. Qualifications You Must Have: * HS diploma with a minimum of 2 years of relevant experience. In the absence of a HS diploma or GED, 4 years of relevant experience is required. * Must be authorized to work in the U.S. without sponsorship now or in the future. Collins Aerospace will not offer sponsorship for this position. Qualifications We Prefer: * Electronics assembly * Product assembly * Hand tools * Electric power tools DRESS CODE: Must wear safety glasses No sunglasses, No hats, No shorts or skirts, No sagging pants or ripped jeans, Shoes MUST be closed shoes, Benefits provided: 401K, medical, dental, and vision, sick time as applicable to state law Butler America Aerospace, LLC. is an equal opportunity employer. Butler evaluates applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information and other legally protected characteristics. The Butler America Aerospace, LLC. EEO Policy Statement and "Know Your Rights" Poster is available here: Applicant and Employee Notices. Butler America Aerospace, LLC. is committed to working with and providing reasonable accommodations to individuals with disabilities. If you need a reasonable accommodation because of a disability for any part of the employment process, please contact the Human Resources Department at accommodations@butler.com.

Mission Critical Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customers mission critical needs, PDC is seeking Micro Assemblers to join our respected and valued team. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. This position is 100% onsite in our Bohemia, NY corporate headquarters. Day shift: 7am - 3pm; 7:30am - 3:30pm or 8am - 4pm (45 minute flexible schedule) This position requires a U.S Person or a person who can qualify for a department of state or commercial license. The compensation for this role is $20/hr to $26.50/hr. * We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Responsibilities: * Perform a variety of complex assembly operations under a microscope, with little or no supervision. * Perform die bonding, wire bonding, header assembly or other operations of comparable difficulty. * Use small hand tools and microscope. * Read and interpret complex assembly drawings and other documents to determine sequence of operation and proper assembly procedures. * Assist in meeting department production goals. * Detailed knowledge of automatic or manual wire bonding and die bonding machines if applicable. * Read and follow operational sheets. Secondary Duties: * Work in a team environment * Cross train * Determine priorities with given resources Job Qualifications - Education/Experience: * Approximately 3 years micro assembly or related experience. * Good eyesight and manual dexterity. * Ability to read and interpret complex assembly drawings. Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Donaldson is committed to solving the world's most complex filtration challenges. Together, we make cool things. As an established technology and innovation leader, we are continuously evolving to meet the filtration needs of our changing world. Join a culture of collaboration and innovation that matters and a chance to learn, effect change, and make meaningful contributions at work and in communities. The Assembler at our Baldwin, WI location involves working collaboratively to assemble and package product. This is a 2nd shift onsite role, with hours Monday-Thursday 3:15 p.m. to 1:15 a.m. Role Responsibilities: * Assembly of non-repetitive parts which may include multiple parts per operation. * Package parts and assemblies. * Ensure compliance to prints. * Operate test equipment when required. * Ensure proper documentation with labeling. * Complies with all safety, DOT, HAZMAT and environmental policies and procedures. * Uses all designated Personal Protective Equipment as required. While this list is representative of essential job duties, it is not an all-inclusive list of duties required to perform this role. Other duties may be assigned to fulfill Donaldson's mission, vision, and strategic plan objectives. Minimum Qualifications: To perform this job successfully, an individual must be able to demonstrate ability to: * Material Handling with forklifts, cranes, carts, etc. * Display mechanical aptitude * Quality conscious * Ability to read blueprints, and understand verbal and written instructions * High School Diploma or GED is required Preferred Qualifications: * Display mechanical aptitude and ability to solve complex problems resulting from a highly customized product line * Perform a variety of tasks throughout the day in a steady work environment Hourly Pay Range: $22.78 This position is overtime eligible as per state and federal regulations. This position is eligible for a gainsharing plan based on the achievement of specific goals. Employee benefits are part of the competitive total rewards package that Donaldson Company, Inc. provides to you. Our comprehensive benefits program includes health benefits, retirement plan (401k), paid time away, paid leaves (including paid parental leave) and more. Immigration Sponsorship Not Available: * Applicants for this position must be currently and legally authorized to work in the United States without the need for current or future sponsorship (e.g., H-1B, J-1, F-1, CPT, OPT, etc.). * Donaldson will not offer immigration sponsorship or assume sponsorship of an employment visa for this position. Key Words: Mechanical Assembly, Blueprint Reading, Forklift & Crane Operation, Quality Control Inspection, Material Handling Equal Opportunity Employer, including Disability and Veterans Employment opportunities for positions in the United States may require use of information which is subject to the export control regulations of the United States. Hiring decisions for such positions are required by law to be made in compliance with these regulations. Applicants for employment opportunities in other countries must be able to meet the comparable export control requirements of that country and of the United States. Donaldson Company has been made aware that there are several recruiting scams that are targeting job seekers. These scams have attempted to solicit money for job applications and/or collect confidential information, Donaldson will never solicit money during the application or recruiting process. Donaldson only accepts online applications through our Careers | Donaldson Company, Inc. website and any communication from a Donaldson recruiter would be sent using a donaldson.com email address. If you have any questions about the legitimacy of an employment opportunity, please reach out to ******************************* to verify that the communication is from Donaldson. Our policy is to provide equal employment opportunities to all qualified persons without regard to race, gender, color, disability, national origin, age, religion, union affiliation, sexual orientation, veteran status, citizenship, gender identity and/or expression, or other status protected by law.

Narda-MITEQ is dedicated to recruiting and developing diverse, high-performing talent who are passionate about what they do. Our employees are unified in a shared dedication to our customers' mission and quest for professional growth. Narda-MITEQ provides an inclusive, engaging environment designed to empower employees and promote work-life success. Fundamental to our culture is an unwavering focus on values, dedication to our communities, and commitment to excellence in everything we do. The following statements are intended to describe the general nature and level of work being performed. They are not intended to be construed as an exhaustive list of all essential functions, duties and skills required of personnel so classified. Management retains the discretion to add or change the duties at any time. Job Description: Responsible for performing a wide variety of electronic or electro-mechanical assembly operations which may include skilled hand work or utilizing automated production equipment. Comprehends and interprets a variety of technical specifications, terms and documents. Determines and/or follows methods and sequence of operations in performing mechanical assembly, wiring, component installation, hand soldering and cable harnessing on assembly units. Makes setups and adjustments holding tolerances to blueprint specifications. Essential Functions: Use soldering irons, tweezers and other standard wiring and assembly tools in sub-assembly and final assembly procedures. Read and interpret assembly drawings, schematics and travelers. Use of caliper, micrometer or other measurement devices as required. Perform mechanical assembly with hand and power tools as required. Qualifications: High School Diploma or equivalent and a minimum of 6 years prior relevant experience or 2-year post-secondary/Associate degree with 2 years relevant experience. Ability to use a microscope to perform assembly procedures for an extended period. Ability to work with small parts/components. Please be aware many of our positions require the ability to obtain a security clearance. Security clearances may only be granted to U.S. citizens. In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information. Narda-MITEQ is proud to be an Equal Opportunity/Disability/Veterans Employer. We are committed to providing a workplace that ensures all employees and applicants are treated with respect and dignity. Narda-MITEQ maintains a workplace free from unlawful discrimination and we ensure that all qualified applicants receive equal consideration for employment. Narda-MITEQ is a drug-free workplace and may conduct pre-employment substance abuse testing and background checks, as permitted by law. If you are a qualified individual with a disability or a disabled veteran and require a reasonable accommodation to use or access the Narda-MITEQ career website due to your disability, you have the right to request such an accommodation. To request a reasonable accommodation, please contact Denise Nocerino at ******************************. Proof of employment authorization will be required. Narda-MITEQ is not required to sponsor applicants for work visas. As this position will require access to export-controlled information, only applications from “U.S. persons” within the meaning of the International Traffic in Arms Regulations and Export Administration Regulations will be considered. Narda-MITEQ is not required to seek export license for applicants who do not meet this requirement.

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description An ever growing medical company is looking for Production Workers . This is a great opportunity to for consistent and long term work. The ideal person must have previous experience working in a production environment. Must be comfortable standing for long periods of time Attention to detail Quality Inspection experience is a huge plus Documenting all aspects of the process Remove defective product and report it to the supervisor 1st shift, Pay: $13 per hour Submit your resume for consideration. Additional Information All your information will be kept confidential according to EEO guidelines.

Power-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package Health coverage (medical, dental, vision) PTO and Paid Holidays 401K EAP ESOP (Employee Stock Ownership Plan) Assembler Required Skills Previous experience or training in a shop/industrial setting Mechanically inclined Familiar with taking measurements and working with a ruler Familiar with assembling components Able to follow instructions in a proper manner Familiar with shop tools (hand tools, power tools, etc) Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks Reading and understanding blueprints prior to starting a project Sourcing the materials to be used in the project Measuring and cutting materials to specifications Assembly of switchboard enclosures and interior electrical components Preparing metal surfaces for finishing Working with design team to complete switchgear packages Checking finished work to make sure that it falls within the tolerances marked on the blueprints Preparing completed packages for shipment Assembler Physical Requirements Ability to safely use and lift equipment weighing 50 lbs. Ability to work standing up to 8 hours per day. This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Help the manufacturing team assemble Genadyne UNO pumps as per customer orders Primary Objective: To assemble pumps and provide cross-functional support to warehouse, CSR and quality department to fulfill orders. Major Areas of Responsibility: Assemble pumps Conduct quality inspection on assembled pumps Verify receiving items for pump assemblies Create records of pumps that are built Maintain appropriate pump parts and accessory storage and handling activities Coordinate with NPWT manager on incoming orders Rework, Repair/Service pumps as required Specific responsibilities (tasks): 1) create and manage pumps, PCBs, part numbers 2) Perform quality test on pumps 3) create and manage documentation of pumps assembled, reworked, repaired and serviced 4) Able to provide technical support to the customers/manager or R&D team as required Requirements Education: High School Graduate Abilities: Ability to work independently, exhibit strong initiative Quick Learner Able to read and write in English Strong interpersonal skills - able to interact with all levels of management as well as customers if required Team player, assembly experience preferred Rate: $18.00/hr.

Job DescriptionBenefits/Perks Competitive Compensation Great Work Environment Career Advancement Opportunities We are seeking an Automotive Body Combo / Assembler / Disassembler to join our team! As an Automotive Body Repairer, you will work closely with clients to build strong relationships, thoroughly inspect and evaluate vehicles, and provide accurate, honest estimates for repair. You will also assist with repairing vehicles, managing multiple repair projects at once, and working closely with coworkers to ensure work is completed properly and on time. The ideal candidate has previous autobody experience, excellent customer service and communication skills, and strong attention to detail. Responsibilities Inspect and provide accurate estimates for autobody repair Maintain strong lines of communication between yourself and the client throughout the whole process to build relationships and provide excellent customer service Repair vehicles to the best of your ability, maintaining our high standards Work within the guidelines of various insurance guidelines Qualifications Previous autobody experience desired Own tools Attention to details Must work on the books Reliable

Schivo Medical manufactures a diverse range of essential medical technology solutions. Working with us, you will be manufacturing or supporting the manufacture of a vast array of different products including robotic surgery instruments, neurosurgical tools, and cardiovascular closure devices that treat chronic disease in new ways so people can live better and longer. As an employee of Schivo Medical, you will tackle a wide array of problems, including some of the world's greatest medical challenges. We are seeking to hire a part time worker.. ***Must work Saturday and Sunday and one day during the week**** Assembly/Product sorter Job Description: Assembler/Visual Sorter sort parts, organizes, and completes visual checks on parts using a microscope. Essential Duties and Responsibilities: Daily secondary processing of components including but not limited to assembly, visual inspections, gauge inspections. Understand various documentations, Follow Travelers, work instructions, secondary operation report, and blueprints. Assemble components to meet the final desired standard. Visual inspection in accordance with acceptance criteria Use various measuring instruments for dimensional inspections. Inform supervisor of any major defects/issues with components Skills: Great hand and eye coordination Ability to multi-task in a fast-paced environment Attention to detail and organized in general. Education: High school diploma or a GED Schivo Medical is an Equal Opportunity Employer. All qualified applicants will receive employment consideration without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, genetic information, disability, or protected veteran status.

Sustainability, plastic pollution, and climate change have never been more at the forefront of our world as they are today. At Ranpak, sustainability has been in our DNA since our founding in 1972. Ranpak's goal then was to create the first environmentally responsible system to protect products during shipment and today, our mission remains the same: To deliver sustainable packaging solutions that help improve supply chain performance and costs, reduce environmental impact, and support a variety of growing business needs globally. The development and improvement of materials, technologies (such as automation) and total solution systems have earned Ranpak a reputation as an innovative leader in eCommerce and industrial supply chain solutions. Ranpak's customers span across a variety of industries including automotive parts, electronics, eCommerce, machinery and home goods. Our customers include Amazon, IKEA, Sephora, Misfit Market and BMW. Ranpak's corporate headquarters are in Concord Township, Ohio with European headquarters in Eygelshoven, the Netherlands and Asia Pacific headquarters in Singapore City, Singapore, respectively. Additionally, a new state-of-the-art building opened in Shelton, CT. Ranpak Holdings Corp. is a New York Stock Exchange listed company (NYSE: PACK). Summary Assembling and testing automated packaging solutions. Assembling mechanical, electrical and pneumatic component according to drawing, electrical schematics and instructions. Following and keeping track of project schedules. Collaboration with engineering, inventory, service and shipping departments. This job description is intended to convey information essential to understanding the scope of the Assembler position and it is not intended to be an exhaustive list of skills, efforts, duties, responsibilities or working conditions associated with the position. Essential Duties & Responsibilities * Reading and following assembly drawing and assembly instructions. Assemble, squares and aligns sub-assembly and structural components, on floor or floor plate. Installing the sub-assembly components on main frame according to drawing and instruction manuals. Mount, connect and adjust pneumatic component. Install and align conveyance systems. * Reading and wiring according to the electrical schematics. Lays our diagram for electrical installations according to wiring specifications. Mount and wire electrical components including motors, sensors, actuators, robotic arms, etc. * Follow and install all the safety requirements of the system. * Modifying component according to engineering request. Drill and tap holes, cutting slots, cutting parts, opening holes, grinding surfaces, rewire and change electrical components. * Report issues to the supervisor, engineering and quality team. * Test and adjusts mechanical and electrical assemblies following the assembly instructions and check lists. * Run the equipment and help with the FAT (Final Acceptance Test). * Collaborate with the service department. Help install the equipment on the customer site. * Following the project schedule and keeping truck of the production order schedule. Reporting the issues to the schedule to the supervisor. * Accurate control of inventory using production orders. Collaborate with inventory for maintaining all needed parts for the project. * Navigate to our Inventory, Project and File Management systems. * Forklift Operation trained or willing to have Forklift Operation Training. Other Duties As assigned by your manager Qualifications To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and /or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Supervisory Responsibilities None Physical Demands The physical demands described here are representative of those that must be met by an employee to successfully perform he essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Ability to lift 50 - 80 pounds. Training High School of GED. Any technical school training in Industrial Electronics, Schematics or Blueprints helpful but not required. Decision Making Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations. Work Environment The work environment characteristics described here are representative of those an employee encounters while preforming the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. EOE STATEMENT We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, national origin, disability status, protected veteran status or any other characteristic protected by law.

North Atlantic Industries is a leading provider of embedded electronic solutions, specializing in rugged embedded computing, power supplies and motion simulation and measurement technologies. Our products and services are used by the military, aerospace, and industrial markets, helping to advance technology and protect the free world. NAI was proud to be recognized as a Top Workplace on Long Island by Newsday! Our culture is very collaborative. We have team building events, company picnics, special event day and employee game room. Please visit our website at ******************** to see more about what makes us a unique place to work. Summary: Production Operator II is responsible for working with computers to process daily production. Production Operator II must be able to follow instructions and pay attention to detail. Creating and maintaining a clean work environment is crucial to the overall quality of our products. Production Operators are required to have flexibility to train and move between functional areas. Production Operator II will be required to do both bench work and machine operations. Production Operators will be required to work in a team environment. Punctuality and communication are crucial for the success of the team. Requirements * Set up and label SMT products * Component preparation, masking and using different types of adhesives. * Mechanical assembly * Through hole and SMT hand soldering and rework. * Interpret IPC-A-610 standards for acceptability and customer specifications. (Certified training will be provided) Qualifications and Education Requirements: * High School Diploma or equivalent. Language Skills: * The individual in this position must be fluent in writing, speaking, and understanding English. * Must have good oral and written communication skills. Other Skills and Abilities: * Must be computer literate. * Experience working in production and PCB Assembly. * Familiarity with assembly tools and Through hole and Surface mount Technology would be a plus. * Familiarity with Surface-Mount Technology (SMT) electronic components and assembly process a plus * Familiarity with using hand tools, screwdrivers, pliers, cutters, etc. * Conscientious regarding quality, time management, teamwork, and safety. * Flexibility to train and move between functional areas. North Atlantic Industries offer comprehensive and competitive packages including: * Medical, Dental, and Vision Insurance * Company-provided Life and AD&D Insurance * Voluntary Supplemental Life Insurance * Long-term Disability Insurance * Flexible Spending Accounts (FSA) * Employee Assistance Program (EAP) * Tax-deferred 401K with company matching contributions * Vacation, holidays, sick * Employee tuition reimbursement * Business casual dress environment * Schedule: M-F Day Shift North Atlantic Industries (NAI) is proud to be an Equal Opportunity Employer and is committed to providing equal employment opportunity for all persons in all facets of employment. All qualified applicants will receive consideration for employment without regard to any legally protected status. If you are an individual with a disability or a disabled veteran and require a reasonable accommodation in applying for any posted position, please contact Human Resources at ************ or by email at ***********. As a federal government contractor, in accordance with applicable laws, regulations, and Executive Orders, North Atlantic Industries (NAI) is required to develop annual Affirmative Action Plans for Protected Veterans and Individuals with Disabilities. Any employees or applicants who wish to review the Affirmative Action Plan for Protected Veterans and Individuals with Disabilities can contact us by sending an email to *********** or by calling ************. Salary Description $22-$26 per hour

Job Description Mission Critical … Join PDC and make a Difference For more than 50 years, Power Device Corporation (PDC) has been recognized as a world leader in the design and manufacture of high-reliability Connectivity, Power, and Control solutions for the Aerospace, Defense, and Space industries. Our dedication to supplying quality products, on-time delivery, and superior support, has contributed to the success of our customers and the critical missions they serve. To continue to meet our customer's mission critical needs, PDC is seeking Micro Assemblers to join our respected and valued team. This position requires a U.S Person or a person who can qualify for a department of state of commercial license. This position is 100% onsite in our Bohemia, NY corporate headquarters. Day shift: 7am - 3pm; 7:30am - 3:30pm or 8am - 4pm (45 minute flexible schedule) This position requires a U.S Person or a person who can qualify for a department of state or commercial license. The compensation for this role is $20/hr to $26.50/hr. * We are not accepting applications from independent recruiters or agencies at this time for this role; should this change the posting will be updated to reflect submission information. Responsibilities: Perform a variety of complex assembly operations under a microscope, with little or no supervision. Perform die bonding, wire bonding, header assembly or other operations of comparable difficulty. Use small hand tools and microscope. Read and interpret complex assembly drawings and other documents to determine sequence of operation and proper assembly procedures. Assist in meeting department production goals. Detailed knowledge of automatic or manual wire bonding and die bonding machines if applicable. Read and follow operational sheets. Secondary Duties: Work in a team environment Cross train Determine priorities with given resources Job Qualifications - Education/Experience: Approximately 3 years micro assembly or related experience. Good eyesight and manual dexterity. Ability to read and interpret complex assembly drawings. Power Device Corporation provides equal employment opportunities to all employees and applicants for employment and prohibits discrimination and harassment of any type without regard to race, color, religion, age, sex, national origin, disability status, genetics, protected veteran status, sexual orientation, gender identity or expression, or any other characteristic protected by federal, state or local laws. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, termination, layoff, recall, transfer, leaves of absence, compensation and training.

Job DescriptionPower-Flo Technologies is seeking an assembler to join our New Hyde Park shop. We design and build custom switchboards and panelboards for a variety of customers. Full Time, Monday - Friday, 7 AM - 3:30 PM. Pay Range: $18 - $22/hour Competitive Benefits Package Health coverage (medical, dental, vision) PTO and Paid Holidays 401K EAP ESOP (Employee Stock Ownership Plan) Assembler Required Skills Previous experience or training in a shop/industrial setting Mechanically inclined Familiar with taking measurements and working with a ruler Familiar with assembling components Able to follow instructions in a proper manner Familiar with shop tools (hand tools, power tools, etc) Valid and clean driver's license to operate company vehicles as needed Assembler Daily Tasks Reading and understanding blueprints prior to starting a project Sourcing the materials to be used in the project Measuring and cutting materials to specifications Assembly of switchboard enclosures and interior electrical components Preparing metal surfaces for finishing Working with design team to complete switchgear packages Checking finished work to make sure that it falls within the tolerances marked on the blueprints Preparing completed packages for shipment Assembler Physical Requirements Ability to safely use and lift equipment weighing 50 lbs. Ability to work standing up to 8 hours per day. This position occasionally requires sitting, climbing, balancing, stooping, kneeling, crouching, and crawling. Exposure to dust, loud noise, and temperature changes. Candidates must have a valid and clean NY State driver's license to operate company vehicles as needed. About Us We are an equal opportunity employer. Applicants must be authorized to work for ANY employer in the US. We are unable to sponsor or take over sponsorship of employment Visa. Power-Flo Technologies and its subsidiaries participate in the USCIS E-Verify Program to verify that all new hires are authorized to work in the United States. Power-Flo Technologies is a unique Family of Companies consisting of distributors, fabricators, manufacturers and motor and pump repair firms serving the New York metropolitan and New England areas. We are a Master Distributor and Manufacturers Representative with REAL SYSTEMS SOLUTIONS.

Job DescriptionPosition Description: Help the manufacturing team assemble Genadyne UNO pumps as per customer orders Primary Objective: To assemble pumps and provide cross-functional support to warehouse, CSR and quality department to fulfill orders. Major Areas of Responsibility: Assemble pumps Conduct quality inspection on assembled pumps Verify receiving items for pump assemblies Create records of pumps that are built Maintain appropriate pump parts and accessory storage and handling activities Coordinate with NPWT manager on incoming orders Rework, Repair/Service pumps as required Specific responsibilities (tasks): 1) create and manage pumps, PCBs, part numbers 2) Perform quality test on pumps 3) create and manage documentation of pumps assembled, reworked, repaired and serviced 4) Able to provide technical support to the customers/manager or R&D team as required Requirements Education: High School Graduate Abilities: Ability to work independently, exhibit strong initiative Quick Learner Able to read and write in English Strong interpersonal skills - able to interact with all levels of management as well as customers if required Team player, assembly experience preferred Rate: $18.00/hr. Powered by JazzHR NqTEIZH512

Open Scientific provides contract staffing and direct hire recruitment services for the scientific, engineering, laboratory and manufacturing sectors. Job Description Entry Level Production Worker: A large company is looking for Production Workers in the Hauppauge area. We are looking for motivated individuals who are interested in long term work. The Production Worker can work quickly and accurately. There is plenty of overtime and room for growth. Repetitive lifting up to 50 pounds Standing for long periods of time Flexible to work in similar environments Spanish only is okay Bilingual is a plus but not a must Shifts: 7:30-4:00pm and 4:00pm-1:00am Pay rate: $9-$10 per hour (increase after 90 days) Competitive benefits package You get a $50 Gift Card after completing 30 days Referral Program: $25 for each person you refer that completes 30 days. Additional Information All your information will be kept confidential according to EEO guidelines.