Assembly line worker jobs in Rapid City, SD - 114 jobs

KEY RESPONSIBILITIES: May be responsible for the kitting process. May maintain inventory counts of nuts, bolts, screws, metal, lumber, etc. Transport product, parts, and materials by using, forklift, pallet jack, or crane Understand and execute work orders provided by VSA's, VSL's or VSM's Work supportively with the appropriate departments to meet quotas and goals Observe all safety guidelines and report safety concerns to management Follow all shop orders and blueprints Able to use basic hand tools and read tape measure Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS: High school diploma or GED preferred. Experience working in a Manufacturing Environment preferred Ability to work in a fast-paced environment Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS: To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds. Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner.

Job DescriptionSalary: 19+ Production Workers play a crucial role in the manufacturing process within various industries, including power electronics. They operate and maintain equipment in factories, working collaboratively with a team to assemble products or goods. Here are the key duties and responsibilities of a Production Worker: Assembling Goods to Finished Product: Assemble products or components according to specifications. Monitor the production process and perform basic testing and quality checks. Inventory Management: Properly store goods and raw materials in the factory. Pack goods ready for shipment. Maintaining Work Areas and Equipment: Keep work areas clean and organized. Perform routine maintenance on machinery. Qualifications: Experience: Proven experience as a Production Worker. Skills: Familiarity with using power tools and other equipment. Ability to read and comprehend instructions. Attention to detail and strong hand-eye coordination. Physical strength and stamina. Education: High school diploma or equivalent. Our ideal Production Worker is hardworking, safety-conscious, and takes pride in their work. Ultimately, this role ensures that manufacturing processes run reliably and efficiently, contributing to the success of our power electronics production. Salary: $19/hour+ DOE Benefits Include: Paid Time Off: 10 days Paid Holidays: 8 days Health Insurance: Multiple plans to choose from Dental Insurance Vision Insurance Flexible Savings Account Health Savings Account 401k Matching Retirement

Job Description Here at Alcom we believe in our mission, vision, and values. Mission: To be the most influential partner in the trailer industry. Vision: To become the market leader in innovative, quality transportation solutions through an unmatched commitment to our employees and customers. Values: Customer Focus, Integrity, Problem Solving, Teamwork The Production Worker is responsible for performing all tasks involved in the production of aluminum trailers. This includes measuring, cutting, and drilling of aluminum and plywood. Apply in person - 501 E 52nd St N, Sioux Falls, SD 57104 M-Th 6:00a - 4:30p | Friday Overtime Potential Heath Insurance Dental & Vision Insurance Short-Term & Long-Term Disability Paid Holidays and Paid Vacation Paid Life Insurance 401(K) plan with 4% match FUNCTIONS AND RESPONSIBILITIES: Assembles different facets of a trailer, including but not limited to: inside trim, fenders, rough or finish wiring, and framing in accordance with the work Balances productivity with quality and safety. Reads and follows blueprints and work orders ensuring a quality product that meets customer demands; performs work as assigned by line. Obtains raw materials from Material Handlers. Cuts material in accordance with specifications on the cut. Notifies supervisor of any mechanical or material issues including but not limited to, defects in material, damage to the trailer, and deviations from work. Ensures that finished product meets quality expectations. Strives for the highest level of quality and understands the need for continuous improvement; supports the concept of “good enough is never good enough.” Maintains a clean and safe work area; works to minimize scrap, places unused material back in appropriate area, and disposes of waste. Follows all safety procedures, wears appropriate personal protective equipment (PPE), and reports any accidents or near misses to supervisor. Performs other related duties and assignments as required. Alcom USA is proud of its diverse workforce and welcomes employees who speak one or more languages. As a necessity to safely and efficiently perform business operations, employees must be proficient in speaking and understanding English. Alcom will assess the level of fluency required on a job by job basis. Employees must be able to speak and understand English for job related communications and are otherwise welcome to speak their native or other language in the workplace. EOE

Production Workers Needed! Multiple Shifts available! GREAT COMPANY THAT TREATS YOU LIKE FAMILY! We have an excellent career opportunity to work in Production, performing manufacturing tasks with great hours and overtime possibilities in Yankton, SD! This is an excellent position for a highly motivated individual who has the ability to multitask while staying on task. Job Duties: Perform all tasks involved in manufacturing production processes. Follow standard work methods and practice safe work habits. Complete paperwork as needed. Report any issues or concerns to the supervisor. Operate equipment as trained and maintain a steady pace of line production. Organize materials and items on racks, shelves, or bins. Record time, quantity, and quality of work orders. The supervisor assigns all other duties. Apply Today! Pay: $21.00/HR DOE plus shift differential for 2nd and 3rd shifts. Shift: 2nd and 3rd shifts available. Why work for Advance Services, Inc. Advance Services is for and about people; we are your employment specialists. Enjoy our easy application process. You NEVER pay a fee! Weekly pay. Fun Safety and attendance incentives. Health Benefits to keep you and your family healthy. Great Referral Incentives. Advance Services partners with the top companies in the area! Apply for this job by clicking the apply button. You will be directed to our website, *********************** Please select a branch near you or call our office at ************. Stop in and see our experienced, bilingual, and friendly staff today at 1800 Broadway, Suite 2, Yankton, SD 57078. Advance Services is an equal opportunity employer.

TCC Materials is a leading manufacturer of architectural and concrete specialty products, which include concrete masonry block, concrete repair products, precast, architectural stone, mortars and grout, and hardscape landscaping products. Consider joining an amazing family-owned business, with over 65 years of industry experience! We offer competitive pay and a great benefits package. What You'll Do: Perform multiple roles in a manufacturing facility including driving forklift, packing cases, palletizing bags/block/cases, labelling product, operating batching & mixing systems, operating liquid packaging filling equipment, and/or operate block production equipment, depending on the assigned facility. Work with a production team to ensure quality and productivity goals are met or exceeded. Essential Duties & Responsibilities: Operate batching, mixing, and production systems of block, bagged goods, liquid, or other packaged goods. Measure and maintain quality and accurate weights of goods on the production line. Accurately record finished good production on worksheets. Apply labels to pallets, bags, containers, shippers, etc. Assist in reviews of inventory levels and completion of inventory forms for ordering raw materials or adjusting inventory. Drive forklift to transport manufactured items from production areas to appropriate place in warehouse, as well as to load/unload trucks, as needed. Adhere to the Company policies and House Rules including maintaining a clean work area and wearing the proper PPE. Ensure physical inventories/cycle counts are conducted as required to ensure accuracy of perpetual inventory. Interface with office staff on production/work order completions. Ensure proper quantities and counts. Maintain effective working relationships with company employees, suppliers, and customers. Promote and maintain the professional image and reputation of the company and ensure timely problem resolution and customer satisfaction. Perform all other duties as assigned by management. Qualifications & Requirements: Must have a high school diploma or GED equivalent. Manufacturing experience in related field is preferred. Must be able to read, write, and speak in English and work in a team environment. Adaptability to a fast-paced manufacturing environment with demanding standards for quality and productivity. Basic mathematical skills are necessary to fill out production sheets, create and interpret schedules, and determine plant procedures. Understanding of manufacturing equipment and process required. Experience with manufacturing/production computerized batching/PLC systems Forklift training as required by OSHA. Benefits Medical Insurance Dental Insurance Life Insurance Retirement Plans Paid Time Off Wellness Program Education Assistance Employee Assistance Program Closing If you are interested in becoming part of our team, please apply online today. We are proud to be an Equal Opportunity Employer. We recognize that a diverse workforce is essential and strongly encourage qualified women, minorities, individuals with disabilities and veterans to apply. Join us in building a diverse and talented workforce that reflects the communities we serve.

Description & Requirements Smurfit Westrock (NYSE:SW) is a global leader in sustainable paper and packaging solutions. We are materials scientists, packaging designers, mechanical engineers and manufacturing experts with a shared purpose: Innovate Boldly. Package Sustainably. Guided by our values of integrity, respect, accountability and excellence, we use leading science and technology to move fiber-based packaging forward. Join the Smurfit WestRock team in Sioux Falls, SD as a Production Worker! Available Shift(s): Must be able to work any shift in a three-shift operation. * 1st Shift: 6 AM - 2 PM * 2nd Shift: 2 PM - 10 PM * 3rd Shift: 10 PM - 6 AM * New employees typically train on days for the first three weeks of work, then transfer to an off shift. Starting Wage Range: $20.18/hr, with increases ranging from $20.50 - $23.92 after 60 days Additional Incentives * Shift Differentials ($0.55/hr for 2nd Shift, $1.00/hr for 3rd Shift) * Health Insurance (Medical, Dental, Vision) available after 60 days * Life Insurance and Short-Term Disability * Paid Lunches and Breaks * 401(k) with Company Contributions * Paid Holidays and PTO Within the First Year * Reimbursements for Boots & RX Safety Glasses * Employee Referral Program * Tuition Reimbursement Primary Duties Include Safely performing a wide range of tasks supporting the manufacturing of corrugated boxes, conducting quality checks, material set-up, machine set-up and maintaining a clean and organized workspace. The ideal candidate will have a strong commitment to working safely, a demonstrated ability to work in a fast-paced environment, and a strong desire to learn manufacturing processes and operate complex machinery. Responsibilities include, but are not limited to: * Operating manufacturing equipment/powered equipment safely and follow specific directions * Maintaining a clean work environment * Ability to read a tape measure and have basic math and computer skills. * Ability to work safely and comply with all safety regulations. * Ability to push, pull, bend, squat, life, reach, kneel, and stand for up to 12 hrs a day. * Must be able to push, pull or lift up to 50 lbs on a frequent basis. * Required to work daily overtime, weekend work and various shifts depending on workload. * Must be willing to work any available shift. * Manufacturing experience preferred but not required. * Other duties as assigned Candidates are required to undergo a drug screening after receiving a conditional job offer, but before starting employment. Qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, disability, protected veteran status or other characteristics protected by state or federal law.

Prepares building for shipping which may include shrink wrapping buildings, removing fixtures, and cleaning dust and dirt off building panels and components. Duties include: of unit component parts. * Remove fixtures to help prepare building to be shipped. * Clean dust and dirt off building panels and various components in building. * Gather supplies and tools needed to complete jobs. * Shrink wrap buildings to prepare for shipment. * Complete work according to specified schedule and complete traveler documents in detail. * Clean up work area and return tools and supplies to appropriate places each day. * Work safely without presenting a direct threat to self or others. * Perform additional duties as requested. Requirements * Ability to follow verbal and written instructions * Flexibility and ability to work under production pressure. * Ability to work in cooperation with other team members. * Experience working with basic hand tools and power tools. * Must be able to stand on feet for long periods of time, work on knees for extended periods of time, work on ladders at heights and lift up to 50 lbs. * Must be able to work in enclosed spaces for extended periods of time. * Ability to perform basic math calculations and measurements. * Forklift certification or ability to obtain certification. This position is located in Tea, SD. Salary Description $18-$21/hour

Job Description At Astec-Yankton, formerly known as Kolberg-Pioneer, our mission is to design, build, and capitalize on the most innovative solutions and products for the industries and customers we serve globally. Our employees thrive in a safe and team-oriented work environment where they are empowered to make suggestions for operational and sustainability enhancements. With safety as our first core value, we take pride in developing talent and invest in training, protective equipment, and technology for continuous improvement. If you share our dedication to advancement and quality services, we'd love to have you join us! The Assembly Mechanic safely performs a variety of tasks to correctly assemble, fit, and join components in the production process of heavy and large mechanical products, per specifications and in accordance with the production schedule. You'll use various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete work tasks. Our Evening Shift hours are Week 1: Monday-Thursday 2:55 pm - Between 1:30 am & 3:00 am depends on overtime needs. This position is Sign-On Bonus eligible! What You'll Do: • Use tools properly to make or repair parts and products. • Comply with all company and industry safety requirements. • Accurately follows documents, such as diagrams, schematics, blueprints, or other verbal or written instructions. • Identify any defective items and handle them according to established procedures. • Assembles component parts, machined parts, and subassemblies • Use and understand assembly instructions, blueprint specifications, and part lists • Uses various hand tools, pneumatic tools, hydraulic tools, and precision measuring instruments to complete tasks • Operates overhead cranes and forklifts to move parts and materials in and out of work area and to assemble large components • Performs minor adjustments, repairs, or setups to equipment or machines under supervision • Perform all required job functions in a safe manner consistent with plant safety standards and report any problems immediately to the team leader or Department Supervisor. Why You'll Love Working for Us: • Health, Dental, Vision- Day 1 Eligibility • Life, and Spousal Insurance • Health Savings and Flexible Spending Accounts • Short-Term and Long-Term Disability • 401(k) with Company Match • PTO • Employee Wellness Programs, Tuition Aid, and Employee Assistance What We Need from You: • High School diploma or GED preferred • Read/understand job-related blueprints • Ability to read tape measure; candidate will complete a tape measure assessment • Willingness to train/work during hours outside of regularly-scheduled core shift. • Heavy equipment manufacturing experience desired. • Knowledge of commonly used mechanical concepts, practices, and procedures required. • Ability to correctly use and read a tape measure • Ability to correctly read/understand job-related blueprints and drawings, required. • Able to operate overhead cranes and forklifts preferred. • Adept at problem-solving. • Ability to satisfactorily work alone with reasonable and appropriate instructions, training, and supervision, and ability to work with others respectfully and professionally in a team environment. • Ability to communicate clearly and completely, expressing needs, and asking questions. • Ability to sufficiently carry out detailed and written and/or oral instructions. • Ability to handle the demand that accompanies production standards and deadlines. • Ability to accept constructive criticism and make subsequent adjustments, and willingness to rework incorrect tasks completed by oneself or others. • Computer experience desired, particularly the ability to use a mouse, and locate and open/close files. • Must be dependable, dedicated to completing work assignments correctly, and use time wisely. ASTEC is a Drug Free Workplace, Affirmative Action, and Equal Opportunity Employer. We do not discriminate based on race, religion, color, national origin, sex, gender, gender expression, sexual orientation, age, marital status, veteran status, or disability status. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. At ASTEC, we value diversity and strive to create a welcoming and inclusive workplace. We recognize that some highly qualified women may not apply for roles due to systemic barriers. We encourage all qualified applicants to apply, and are committed to providing a fair and equitable hiring process for all candidates.

Job Family for Posting: Manufacturing Job Type for Job Posting: Full Time Apply now * Apply Now * Start applying with LinkedIn Start Please wait... About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people - and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you're in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can't happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Job Purpose Performs all aspects of assembly, test, and calibration of assemblies according to specifications. Key Responsibilities * Build assemblies using various tools and fixtures. * Verify standards are correct and product meets required specifications according to blueprints or process instructions. * May package products or assemblies, as needed. * Inspect assemblies for defects during various stages of production. * Perform tests on products as needed. * Maintain a clean and safe work area. Follow established safety and ergonomic standards. * Perform high quality work. * Identify production related issues. * May be called upon to perform comparable duties of a similar or related nature and/or assist in other areas as needed. * Learning, understanding, continuously improving, and promoting the division's quality managements system in accordance with ISO standards. * Demonstrates the Dimensions of Competition and Raven Team Member Values in their daily actions and encourages their teams to do the same. Experience Required * Minimum High School diploma or equivalent. Preferred Qualifications * Team player who is self-motivated and has ability to work with minimal supervision. * Ability to work at a fast pace efficiently. * Ability to use hand tools, soldering irons, and press equipment. * Ability to read blueprints and work instructions and maintain accurate records. * Basic computer skills necessary. * Ability to communicate effectively with team members and leadership staff. Pay Transparency The annual salary for this role is USD $18.00 - plus any applicable bonus (Actual salaries will vary and will be based on various factors, such as skill, experience and qualification for the role.) What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. To support our employees, we offer regional comprehensive benefits, including: * Flexible work arrangements * Savings & Retirement benefits * Tuition reimbursement * Parental leave * Adoption assistance * Fertility & Family building support * Employee Assistance Programs * Charitable contribution matching and Volunteer Time Off Click here to learn more about our benefits offerings! (US only) US applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Applicants can learn more about their rights by viewing the federal "Know Your Rights" poster here. CNH Industrial participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. You can view additional information here. Canada applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, nationality, place of origin, disability, marital status, family status, age, or any other ground prohibited by applicable provincial human rights legislation. If you need reasonable accommodation with the application process, please contact us at ******************************. Apply now * Apply Now * Start applying with LinkedIn Start Please wait... {{video.content.cta}} {{video.content.title}} {{video.content.description}} × {{explore.title}} {{explore.description}} {{feed.title["#text"]}} {{feed.city["#text"]}}, {{feed.country["#text"]}} {{explore.cta}}

Full-time Description High Horsepower (HHP) Assembler / Ensamblador de Alta Potencia (HHP) Mitchell, SD | Full-Time | Tiempo Completo |2nd SHIFT 2PM-10PM Monday to Friday About the Role As an HHP Assembler, you'll locate, retrieve, and assemble parts to build large, complex units using work orders and 3D computer models. You'll move completed units with motorized cranes and forklifts, prepare them for shipping, and ensure every assembly meets AKG and industry quality standards. Sobre el Puesto Como Ensamblador HHP, localizará, recogerá y ensamblará piezas para construir unidades grandes y complejas siguiendo órdenes de trabajo y modelos 3D. Movilizará las unidades terminadas con grúas motorizadas y montacargas, las preparará para envío y garantizará que cada ensamblaje cumpla con los estándares de calidad de AKG y de la industria. Requirements The Ideal Candidate We're looking for someone who: Has at least 2 years of experience in a manufacturing environment, with 1 year of assembly experience strongly preferred. Can read and follow detailed blueprints, work instructions, and 3D computer models. Has strong mechanical aptitude and is comfortable working with steel parts, fans, bearings, bushings, sheaves, and shafts. Is physically capable of lifting up to 50 lbs, using motorized cranes, and performing repetitive movements safely. Pays strong attention to detail and produces high-quality, precise work. Candidato Ideal Buscamos a alguien que: Tenga al menos 2 años de experiencia en un entorno de manufactura, preferiblemente con 1año de experiencia en ensamblaje. Sea capaz de leer y seguir planos detallados, instrucciones de trabajo y modelos 3D. Posea gran habilidad mecánica y se sienta cómodo trabajando con piezas de acero, ventiladores, rodamientos, bujes, poleas y ejes. Sea físicamente capaz de levantar hasta 50 lbs, usar grúas motorizadas y realizar movimientos repetitivos de manera segura. Preste gran atención a los detalles y produzca trabajo preciso y de alta calidad. Pueda cumplir de manera confiable su turno programado y seguir todas las políticas y procedimientos de seguridad. Disfrute trabajar en un entorno de equipo y tenga iniciativa para reportar problemas o mejorar procesos. What You'll Do Read and interpret work instructions, blueprints, and 3D models. Inspect parts such as steel components, fans, bearings, bushings, sheaves, and shafts; make minor adjustments as needed. Locate and retrieve parts required for assembly. Move assemblies safely using motorized cranes or forklifts. Assemble components accurately following blueprints and 3D models. Document completed assemblies according to AKG and industry standards. Meet production quotas set by Lead or Supervisor. Maintain a clean and safe workspace. Build and maintain knowledge of parts and assembly procedures. Report issues to supervisors promptly. Follow all AKG policies, procedures, and environmental standards. Responsabilidades Leer e interpretar instrucciones de trabajo, planos y modelos 3D. Inspeccionar piezas como componentes de acero, ventiladores, rodamientos, bujes, poleas y ejes; realizar ajustes menores según sea necesario. Localizar y recoger las piezas necesarias para el ensamblaje. Mover las unidades de manera segura utilizando grúas motorizadas o montacargas. Ensamblar los componentes de manera precisa siguiendo planos y modelos 3D. Documentar los ensamblajes completados según los estándares de AKG y de la industria. Cumplir con las cuotas de producción asignadas por el Supervisor o Líder. Mantener un área de trabajo limpia y segura. Desarrollar y mantener conocimiento sobre las piezas y procedimientos de ensamblaje. Reportar problemas al supervisor de manera inmediata. Seguir todas las políticas, procedimientos y estándares ambientales de AKG. Physical Requirements Walk (30%) and stand (70%) of the time; bending, stooping, pulling, pushing, twisting, and turning as needed. Lift up to 50 lbs (20% of the time). Use motorized cranes, ladders, scaffolding, power tools, and basic mechanic tools safely. Wear safety gear including steel-toe shoes, safety glasses, and bump caps (provided). Requisitos Físicos Caminar (30%) y estar de pie (70%) del tiempo; doblarse, agacharse, empujar, jalar, girar y rotar según sea necesario. Levantar hasta 50 lbs (20% del tiempo). Usar grúas motorizadas, escaleras, andamios, herramientas eléctricas y herramientas mecánicas básicas de manera segura. Usar equipo de seguridad como zapatos con punta de acero, gafas de seguridad y cascos (proporcionados). Disclaimer / Descargo de Responsabilidad This job description is intended to describe the general nature and level of work. It is not an exhaustive list of all responsibilities, duties, or skills required. Esta descripción de trabajo tiene la intención de describir la naturaleza y nivel general del trabajo. No es una lista exhaustiva de todas las responsabilidades, deberes o habilidades requeridas.

The Assembler installs parts on and in cabs properly, timely, safely, and efficiently using summarized bills of material. Also responsible for setting up the area with all needed parts based on knowledge of the unit. This role inspects the material for any deficiencies and makes sure that all are corrected before moving the cab to the end of the assembly line. A successful candidate is a detail oriented, multi-tasker with the ability to handle assignments efficiently and accurately. KEY RESPONSIBILITIES: Sets up area by stocking parts bins and parts shelves with parts according to knowledge of unit being assembled using summarized bills of material. Fastens parts together with bolts, screws, rivets, or other fasteners as required. Installs windows, mirrors, wire harness, wipers, inside panels, lights, and other necessary components per assembly drawing using pneumatic as well as hand tools. Performs inspection to assure paint and cab meets quality standards, electrical systems work correctly, the cab does not leak, and to assure all parts are installed and installed correctly. Assures deficiencies are corrected as needed. Completes and forwards required paperwork. Moves completed cab to the end of the assembly line. Other duties as assigned. KEY SKILLS AND COMPETENCIES: Able to follow verbal and written instructions Basic math skills Ability to deal with standardized situations with as few variables as possible Ability to read assembly drawings Ability to frequently bend and stoop Must be able to stand for extended period of time and exert moderate to heavy physical effort with a minimum lifting requirement of up to 50 pounds Must be willing to travel as needed via most efficient means Must be physically able to access all areas of the plant and grounds Manufacturing experience a plus This position description is not intended to be an exhaustive list of all duties, responsibilities and competencies required of this position. Employees are held accountable for all aspects for the job, which are subject to change at any time. An individual must be able to perform each essential duty satisfactorily. The requirements listed are representative of the knowledge, skill and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Company Information We are dedicated to the belief that people are our most important asset. In filling job openings every effort is expended to find candidates within Crenlo, its divisions or subsidiaries. Employee development, opportunity to grow and continuing to evolve both as an employee and as a company are instrumental to our success. We encourage employees to inquire about open positions and apply to those that help further their career goals. Crenlo Engineered Cabs is an equal employment opportunity employer. Qualified applicants are considered regardless of race, color, religion, age, national origin, sex, disability, or veteran's status.

TempToFT Assembler REPORTS TO: Assembly Supervisor / Team Lead WAGE: $16/hr 1st shift (6:00am-4:30pm) PRIMARY PURPOSE: Assembles industrial fans and confirms that all parts and accessories are properly fitted and attached per Client engineering and quality standards. KEY RESPONSIBILITIES Operates bridge crane/fork lift/pallet jack to bring fans to work station and/or testing area; safely operates lift table to bring work up to a comfortable working height (if applicable). Reads and interprets blueprints; checks shop orders to ensure that all necessary parts and accessories are readily available; and finds all necessary parts and accessories that are not with the current parts. Positions parts and examines connections for correct fit; resolves assembly and production issues; reports quality issues and errors in production line; and informs supervisor of any shortages in parts or hardware Arranges shaft and bearings and ensures that the center of the shaft is in the center of the housing and has an equal distance in radius in all directions. Connects the prop and ensures that it is the correct size (if possible). Connects lube lines (copper, plastic, stainless steel). Connects the motor and belt alignment. Uses appropriate tools to assemble and fasten all parts on the fan assembly per Client engineering and quality standards. Wires all necessary wires correctly and safely. Removes small quantities of metal with hand files, scrapers, and die grinders to ensure proper fit between parts. Verifies that everything from the shop order is completed prior to signing off on each unit. Act, live, and behave by Client Core Values Additional duties may be assigned, dependent upon location and product line QUALIFICATIONS High school diploma or GED. 6+ months' experience and/or training (technical school) or equivalent combination of education and experience. Ability to read and interpret documents such as safety rules, operating and maintenance instructions and procedure manuals written in English. Basic math skills to include addition, subtraction, multiplication and division in all units of measure including whole numbers, fractions and decimals. Ability to read a tape measure. Ability to use tools in a safe and proper manner. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: Forklift Certificate Bridge Crane Training Fall Protection Training PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds; and occasionally lift/move up to 50 pounds. Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision and depth perception.

KEY RESPONSIBILITIES: May be responsible for the kitting process. May maintain inventory counts of nuts, bolts, screws, metal, lumber, etc. Transport product, parts, and materials by using, forklift, pallet jack, or crane Understand and execute work orders provided by VSA's, VSL's or VSM's Work supportively with the appropriate departments to meet quotas and goals Observe all safety guidelines and report safety concerns to management Follow all shop orders and blueprints Able to use basic hand tools and read tape measure Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS: High school diploma or GED preferred. Experience working in a Manufacturing Environment preferred Ability to work in a fast-paced environment Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS: To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds. Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

Production Workers play a crucial role in the manufacturing process within various industries, including power electronics. They operate and maintain equipment in factories, working collaboratively with a team to assemble products or goods. Here are the key duties and responsibilities of a Production Worker: Assembling Goods to Finished Product: Assemble products or components according to specifications. Monitor the production process and perform basic testing and quality checks. Inventory Management: Properly store goods and raw materials in the factory. Pack goods ready for shipment. Maintaining Work Areas and Equipment: Keep work areas clean and organized. Perform routine maintenance on machinery. Qualifications: Experience: Proven experience as a Production Worker. Skills: Familiarity with using power tools and other equipment. Ability to read and comprehend instructions. Attention to detail and strong hand-eye coordination. Physical strength and stamina. Education: High school diploma or equivalent. Our ideal Production Worker is hardworking, safety-conscious, and takes pride in their work. Ultimately, this role ensures that manufacturing processes run reliably and efficiently, contributing to the success of our power electronics production. Salary: $19/hour+ DOE Benefits Include: Paid Time Off: 10 days Paid Holidays: 8 days Health Insurance: Multiple plans to choose from Dental Insurance Vision Insurance Flexible Savings Account Health Savings Account 401k Matching Retirement

Job Family for Posting: Manufacturing Job Type for Job Posting: Full Time Apply now * Apply Now * Start applying with LinkedIn Start Please wait... About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people - and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you're in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can't happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Job Purpose Performs all aspects of assembly, test, and calibration of assemblies according to specifications. Key Responsibilities * Build assemblies using various tools and fixtures. * Verify standards are correct and product meets required specifications according to blueprints or process instructions. * May package products or assemblies, as needed. * Inspect assemblies for defects during various stages of production. * Perform tests on products as needed. * Maintain a clean and safe work area. Follow established safety and ergonomic standards. * Perform high quality work. * Identify production related issues. * May be called upon to perform comparable duties of a similar or related nature and/or assist in other areas as needed. * Learning, understanding, continuously improving, and promoting the division's quality managements system in accordance with ISO standards. * Demonstrates the Dimensions of Competition and Raven Team Member Values in their daily actions and encourages their teams to do the same. Experience Required Minimum High School diploma or equivalent. Preferred Qualifications * Team player who is self-motivated and has ability to work with minimal supervision. * Ability to work at a fast pace efficiently. * Ability to use hand tools, soldering irons, and press equipment. * Ability to read blueprints and work instructions and maintain accurate records. * Basic computer skills necessary. * Ability to communicate effectively with team members and leadership staff. Pay Transparency The annual salary for this role is USD $18.00 - plus any applicable bonus (Actual salaries will vary and will be based on various factors, such as skill, experience and qualification for the role.) What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. To support our employees, we offer regional comprehensive benefits, including: * Flexible work arrangements * Savings & Retirement benefits * Tuition reimbursement * Parental leave * Adoption assistance * Fertility & Family building support * Employee Assistance Programs * Charitable contribution matching and Volunteer Time Off Click here to learn more about our benefits offerings! (US only) US applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Applicants can learn more about their rights by viewing the federal "Know Your Rights" poster here. CNH Industrial participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. You can view additional information here. Canada applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, nationality, place of origin, disability, marital status, family status, age, or any other ground prohibited by applicable provincial human rights legislation. If you need reasonable accommodation with the application process, please contact us at ******************************. Apply now * Apply Now * Start applying with LinkedIn Start Please wait... {{video.content.cta}} {{video.content.title}} {{video.content.description}} × {{explore.title}} {{explore.description}} {{feed.title["#text"]}} {{feed.city["#text"]}}, {{feed.country["#text"]}} {{explore.cta}}

Job DescriptionDescription: Prepares building for shipping which may include shrink wrapping buildings, removing fixtures, and cleaning dust and dirt off building panels and components. Duties include: of unit component parts. Remove fixtures to help prepare building to be shipped. Clean dust and dirt off building panels and various components in building. Gather supplies and tools needed to complete jobs. Shrink wrap buildings to prepare for shipment. Complete work according to specified schedule and complete traveler documents in detail. Clean up work area and return tools and supplies to appropriate places each day. Work safely without presenting a direct threat to self or others. Perform additional duties as requested. Requirements: Ability to follow verbal and written instructions Flexibility and ability to work under production pressure. Ability to work in cooperation with other team members. Experience working with basic hand tools and power tools. Must be able to stand on feet for long periods of time, work on knees for extended periods of time, work on ladders at heights and lift up to 50 lbs. Must be able to work in enclosed spaces for extended periods of time. Ability to perform basic math calculations and measurements. Forklift certification or ability to obtain certification. This position is located in Tea, SD.

KEY RESPONSIBILITIES Uses a variety of hand/power tools to correctly assemble products. Operates rigging and lifting devices safety Assembles assigned product parts in accordance with standard work instructions. Reports problems with quality, equipment, and material to supervisors. Complete documentation and work in a timely manner Work in both individual and team environment Maintains good housekeeping and clean work areas in assigned space Act, live, and behave by TCF Core Values Additional duties may be assigned, dependent upon location and product line QUALIFICATIONS Typically requires a high school diploma and up to 2 years of experience Read and understand shop orders and blueprints, safety rules, standard work instructions written in English. Basic math skills to include addition, subtraction, multiplication, and division in all units of measure including whole numbers, fractions, and decimals. Ability to read a tape measure. Ability to use hand tools in a safe and proper manner. Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds; and occasionally lift/move up to 50 pounds. Continuously stand; walk; use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, stoop, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.

Job Family for Posting: Manufacturing Job Type for Job Posting: Full Time Apply now * Apply Now * Start applying with LinkedIn Start Please wait... About Us Innovation. Sustainability. Productivity. This is how we are Breaking New Ground in our mission to sustainably advance the noble work of farmers and builders everywhere. With a growing global population and increased demands on resources, our products are instrumental to feeding and sheltering the world. From developing products that run on alternative power to productivity-enhancing precision tech, we are delivering solutions that benefit people - and they are possible thanks to people like you. If the opportunity to build your skills as part of a collaborative, global team excites you, you're in the right place. Grow a Career. Build a Future! Be part of this company at the forefront of agriculture and construction, that passionately innovates to drive customer efficiency and success. And we know innovation can't happen without collaboration. So, everything we do at CNH Industrial is about reaching new heights as one team, always delivering for the good of our customers. Job Purpose Performs all aspects of assembly, test, and calibration of assemblies according to specifications. Key Responsibilities * Build assemblies using various tools and fixtures. * Verify standards are correct and product meets required specifications according to blueprints or process instructions. * May package products or assemblies, as needed. * Inspect assemblies for defects during various stages of production. * Perform tests on products as needed. * Maintain a clean and safe work area. Follow established safety and ergonomic standards. * Perform high quality work. * Identify production related issues. * May be called upon to perform comparable duties of a similar or related nature and/or assist in other areas as needed. * Learning, understanding, continuously improving, and promoting the division's quality managements system in accordance with ISO standards. * Demonstrates the Dimensions of Competition and Raven Team Member Values in their daily actions and encourages their teams to do the same. Experience Required Minimum High School diploma or equivalent. Preferred Qualifications * Team player who is self-motivated and has ability to work with minimal supervision. * Ability to work at a fast pace efficiently. * Ability to use hand tools, soldering irons, and press equipment. * Ability to read blueprints and work instructions and maintain accurate records. * Basic computer skills necessary. * Ability to communicate effectively with team members and leadership staff. Pay Transparency The annual salary for this role is $18.00/hr plus any applicable bonus (Actual salaries will vary and will be based on various factors, such as skill, experience and qualification for the role.) What We Offer We offer dynamic career opportunities across an international landscape. As an equal opportunity employer, we are committed to delivering value for all our employees and fostering a culture of respect. At CNH, we understand that the best solutions come from the diverse experiences and skills of our people. Here, you will be empowered to grow your career, to follow your passion, and help build a better future. To support our employees, we offer regional comprehensive benefits, including: * Flexible work arrangements * Savings & Retirement benefits * Tuition reimbursement * Parental leave * Adoption assistance * Fertility & Family building support * Employee Assistance Programs * Charitable contribution matching and Volunteer Time Off Click here to learn more about our benefits offerings! (US only) US applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or veteran status. Applicants can learn more about their rights by viewing the federal "Know Your Rights" poster here. CNH Industrial participates in E-Verify and will provide the federal government with your Form I-9 information to confirm that you are authorized to work in the U.S. You can view additional information here. Canada applicants: CNH Industrial is an equal opportunity employer. This company considers candidates regardless of race, color, religion, sex, sexual orientation, gender identity, nationality, place of origin, disability, marital status, family status, age, or any other ground prohibited by applicable provincial human rights legislation. If you need reasonable accommodation with the application process, please contact us at ******************************. Apply now * Apply Now * Start applying with LinkedIn Start Please wait... {{video.content.cta}} {{video.content.title}} {{video.content.description}} × {{explore.title}} {{explore.description}} {{feed.title["#text"]}} {{feed.city["#text"]}}, {{feed.country["#text"]}} {{explore.cta}}

KEY RESPONSIBILITIES: May be responsible for the kitting process. May maintain inventory counts of nuts, bolts, screws, metal, lumber, etc. Transport product, parts, and materials by using, forklift, pallet jack, or crane Understand and execute work orders provided by VSA's, VSL's or VSM's Work supportively with the appropriate departments to meet quotas and goals Observe all safety guidelines and report safety concerns to management Follow all shop orders and blueprints Able to use basic hand tools and read tape measure Maintains good housekeeping and clean work areas in assigned space Act, Live, and Behave by TCF Core Values. Additional duties may be assigned, dependent upon location and product line. QUALIFICATIONS: High school diploma or GED preferred. Experience working in a Manufacturing Environment preferred Ability to work in a fast-paced environment Must be able to understand verbal and written instructions Troubleshoot problems and report issues Must work well in team environment Based on department, may be required to operate a forklift, overhead crane, and electric pallet jack. CERTIFICATIONS, LICENSES, REGISTRATIONS AND REQUIRED TRAINING The following certifications and training, if required, will be provided by the company: JSA completion, Forklift Operations, PPE identification and usage, Crane Training, hazard awareness/identification, Lift table operations, Rigging safety Understands SQDE Metrics, LDMS, Issue boards, 5S PHYSICAL DEMANDS/WORKING CONDITIONS: To successfully perform the essential function of this position, employees must have the ability to: Continuously lift/move 10 pounds; frequently lift/move up to 25 pounds and occasionally lift/move up to 50 pounds. Continuously stand; walk; bend/stoop, use hands to finger, handle or feel; reach with hands and arms above shoulder height; stoop, kneel, crouch or crawl; talk; and hear. Occasionally climb, balance, kneel, reach with hands and arms at waist level and below the waist, and work in limited space. Specific vision abilities required include close vision, color vision, distance vision, peripheral vision, and depth perception. WORK ENVIRONMENT: While performing the duties of this position, the employee is continuously exposed to moving mechanical parts and extreme heat. The employee is occasionally exposed to high places, fumes, or airborne particles and/or caustic chemicals. The noise level in the work environment is usually loud. SAFETY Twin City Fan is dedicated to providing a safe and healthy work environment. Every employee must understand and continually work within the safety and health rules and policies. The use of good judgment and common sense is critical to workplace safety and Twin City Fan expects every employee to work in a safe and conscientious manner. This job description does not constitute a written or implied contract of employment, nor is it an all-inclusive list of responsibilities. Twin City Fan Companies, Ltd. reserves the right to revise or change job duties and responsibilities as business needs arise. Qualifications are representative of minimum levels of knowledge, skills, and experience required.