Assembly line worker jobs in Selma, AL

TSC's is seeking a Temporary Assembler, I at our Huntsville, AL Discovery location to support our production division. Responsibilities: Performs basic and intricate electronic/electro-mechanical assembly functions on prototype and production type hardware according to company workmanship standards and military or client specifications. Assists in the development and wiring of engineering models and in the development of assembly methods and wire lists. Uses hand or power tools to trim, shim, cut, and make other adjustments to fit components together and align them properly. May assist in instructing and training lower level assemblers. Reads and interprets wiring lists and assembly drawings and Works to work orders using visual aids, ECN's, and schematics. May perform any rework from test failures in accordance with standard repair procedures and may set up and operate automatic prepping, loading, and insertion equipment. The employee may frequently be required to stand; walk; and use hands to finger, handle, or feel objects, tools, or controls. The employee is required to reach with hands and arms. Requirements: High school diploma and 0-1 years of production and/or assembly experience Ability to lift and/or move up to 50 pounds. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

At International, we don't just build trucks-we build careers. As a leader in sustainable transportation, we offer a dynamic environment where innovation, inclusion, and personal growth are at the forefront. Our team members are empowered through comprehensive benefits, including competitive compensation, comprehensive health coverage, work-life balance programs, financial benefits, and company-paid beneficiary plans. We foster a culture that celebrates diversity and inclusion, with employee resource groups supporting various communities. Whether you're just starting out or looking to advance your career, International provides the resources and opportunities to help you succeed. Join us and be part of a team that's driving the future of transportation. We're looking for dedicated team members who share our core values-Customer First, Team Spirit, Respect, Responsibility, and Eliminating Waste. Our frontline team members are the heart of our business: they're the first to represent our brand, the driving force behind our daily operations, and the key to delivering quality and value to our customers. When you join the front lines at International, you're not just taking a job-you're stepping into a vital role that powers everything we do. Role Description: Fabricate and assemble parts, pieces, and products using various tools and equipment. Emphasis on quality, accuracy, and attention to detail. Facility: Cutting-edge automated facility with climate control. Schedule: Monday - Thursday 1st Shift: 6:30 AM - 5:00 PM 2nd Shift: 7:30 PM - 6:00 AM Benefits: Start on Day One! Includes a generous PTO plan that includes Paid Personal Days and Vacation and 12 Paid Holidays. Medical, Dental, Vision, Short Term Disability, Long Term Disability, 401(K) Plan, Up to 16 weeks of Paid Parental Leave, Tuition Reimbursement, Company Discounts and much more. Starting Pay: $21.26 to $28.88 per hour in a two year grow in 6% Shift Differential for 2nd Shift Team Members Quarterly Incentive Program Opportunities for Advancement: Opportunities for career advancement into leadership, administrative roles, quality assurance, and skilled trades. Responsibilities Responsibilities include but are not limited to: * Assemble Engine and Powertrain Components: Obtain incoming components and assemble products according to process instructions, performing all necessary gauge verifications. * Quality and Productivity: Perform duties to maintain quality and productivity standards. * Support Team Objectives: Replace or assist others as needed to meet uptime objectives. * Team Participation: Actively participate in the work group and business team. * Continuous Improvement: Strive for continual improvement and focus on process optimization. * Guidance and Training: Instruct, assist, and direct others as required. * Compliance: Ensure compliance with process instructions, PFMEA, and Control Plans; notify group leader of any deviations. * Accountability: Accept accountability for achieving goals and planning strategies. Minimum Requirements * High School Diploma or GED equivalent Additional Requirements * Qualified candidates, excluding current employees, must be legally authorized on an unrestricted basis (US Citizen, Legal Permanent Resident, Refugee or Asylee) to be employed in the United States. We do not anticipate providing employment related work sponsorship for this position (e.g., H-1B status) * Physical Requirements (Ability to do the following up to 10 hours per shift): * Walk, stand, sit, bend, twist/turn, kneel, squat, crawl * Climb using both legs and arms * Head/neck movement * Reach outward or above the shoulder * Lift, carry, push, or pull 15-45 pounds * Repetitive use of hands and fingers * Use of vibrating tools * Exposure to constant and intermittent noise, fumes, smoke and gases, solvents, paint, grease and oils, radiant energy, and slippery surfaces * Must be willing to work any shift Desired Skills * Positive attitude, ethics and International values which support our company's values, and a healthy, high performance culture * At least two years of prior manufacturing experience * At least six months' experience interpreting assembly build instructions * Customer focus and drive for results Benefits and Compensation We provide a competitive total rewards package which ensures job satisfaction both on and off the job. We offer market-based compensation, health benefits, 401(k) match, tuition assistance, EAP, legal insurance, an employee discount program, and more. You can learn more about our comprehensive benefits package at ******************************************** Company Overview ABOUT TRATON With its brands Scania, MAN, International, and Volkswagen Truck & Bus, TRATON SE is the parent and holding company of the TRATON GROUP and one of the world's leading commercial vehicle manufacturers. The Group's product portfolio comprises trucks, buses, and light-duty commercial vehicles. "Transforming Transportation Together. For a sustainable world.": this intention underlines the Company's ambition to have a lasting and sustainable impact on the commercial vehicle business and on the Group's commercial growth. ABOUT INTERNATIONAL From a one-man company built on the world-changing invention of the McCormick reaper in 1831, to the 15,000-person-strong company we are today, few companies can lay claim to a history like International. Based in Lisle, Illinois, International Motors, LLC* creates solutions that deliver greater uptime and productivity to our customers throughout the full operation of our commercial vehicles. We build International trucks and engines and IC Bus school and commercial buses that are as tough and as smart as the people who drive them. We also develop Fleetrite aftermarket parts. In everything we do, our vision is to accelerate the impact of sustainable mobility to create the cleaner, safer world we all deserve. As of 2021, we joined Scania, MAN and Volkswagen Truck & Bus in TRATON GROUP, a global champion of the truck and transport services industry. To learn more, visit ********************** * International Motors, LLC is d/b/a International Motors USA in Illinois, Missouri, New Jersey, Ohio, Texas, and Utah. EEO Statement We are an Equal Opportunity Employer. We evaluate qualified applicants without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, veteran status, and other legally protected characteristics. If you are a qualified individual with a disability and require a reasonable accommodation to access the online application system or participate in the interview process due to your disability, please email ********************* to request assistance. Kindly specify Job Requisition Number / Job Title and Location in response. Otherwise, your request may not be considered.

The Assembler I will assemble and inspect product to ensure the highest quality product is provided to our customer. This role requires a person that is self-motivated, has a strong attention to detail and a continuous improvement mindset. BENEFITS & PAY Pay based on skill and experience Health Insurance plus Dental & Vision coverage 401K Responsibilities • Complete basic product assembly according to engineering standards, diagrams and drawings. • Perform a variety of tasks ranging from repetitive to non-repetitive product assembly operations. • Complete shop floor traveler documents. • Conduct quality inspections on processing line in accordance with quality specifications. • May disassemble, modify, rework, reassemble and test experimental assemblies. • Keep working area safe, clean and organized. • May work in other areas of the facility, as needed. • Ability to lift and move up to 50 pounds of materials and requires standing and moving. While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel. The employee frequently is required to reach with hands and arms and talk or hear. The employee is occasionally required to walk. PREFERRED QUALIFICATIONS High school diploma or general equivalency diploma (GED). Prior related work experience (1+ years) Ability to read and interpret blueprints Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals REQUIRED QUALIFICATIONS Must be able to read, write, and communicate in English Ability to define problems, collect data, establish facts, and draw and apply valid conclusions Regularly use hands to finger, handle, or feel objects, tools, or controls and reach with hands and arms Regularly lift and/or move up to 15 pounds, frequently lift and/or move up to 30 pounds, and occasionally lift and/or move up to 50 pounds. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. COMPANY OVERVIEW Boyd is the world's leading innovator in sustainable engineered material and thermal solutions that make our customers' products better, safer, faster, and more reliable. We develop and combine technologies to solve ambitious performance targets in our customers' most critical applications. By implementing technologies and material science in novel ways to seal, protect, cool, and interface, Boyd has continually redefined the possible and championed customer success for over 90 years. As a unique provider of innovative solutions, Boyd is in a multitude of industries such as aerospace, medical, consumer electronics and recreational vehicles to name only a few. We partner and serve some of the top organizations around the world. Our diversification and our global reach in the US, Asia and Europe, mean we offer many ways for you to grow and develop your career. We push the limits of your potential and provide you with the tools you need for a successful career. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees. All Job Posting Locations (Location) Wetumpka Remote Type On-Site EEO Statement Boyd Corp is an equal opportunity employer. We celebrate diversity and are committed to creating an inclusive environment for all employees.

Job DescriptionSalary: The Rough Fab Assembler (RFA) is responsible for assembling equipment in preparation for wiring, testing, and final assembly. The RFA will fulfill many roles within the process of assembling electronics equipment. The RFA will assemble off-the-shelf OEM equipment and will integrate custom panels and custom brackets to create unique assemblies per project needs. The RFA will receive shipments, distribute parts, organize parts by project, ship assemblies, maintain warehouse, maintain tools and equipment used in the process, and fulfill any other tasks as required by supervisors and management. Rough Fab Job Duties & Responsibilities Read and understand assembly drawings Ensure that all required parts for assembly are available Mark cutting lines and drilling holes on materials Confirm proper fitting and alignment of materials to be assembled Maintain production schedule Maintain clean and organized work area Clean and maintain tools Assemble parts in equipment racks Prepare packaged assemblies for shipment Receive packages Load and ship packages and assemblies Obey safety requirements Requirements Proven work experience as a Fabricator Good dexterity Attention to detail Good organizational skills Ability to lift 50 lbs. Clean work area and warehouse Drivers license with clean driving record Physical stamina Ability to read and comprehend assembly drawings Proficiency with operating the following hand tools: Drill Screw Gun Circular Saw Jigsaw Ability to operate a Fork Lift Good interpersonal skills EOE/M/F/Veteran/Disabled

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Structures Assembler to join our production team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for the structural installation of parts and major components in the manufacturing of the aircraft within the assigned station area. Primary Responsibilities: ● Perform repair work (concessions/discrepancies). ● Positioning and assembly of components. ● Rework of external skin damage of the aircraft. ● Work in compliance with production orders, design documents, concessions and inspection procedures. ● Prepare and solve queries, ensure follow-up and give feedback. ● Examine and sort work orders and drawings. ● Prepare job station for daily activity. ● Perform other duties as assigned. Qualified Experience / Skills / Training: Education: Required: High school diploma or GED. The ability to successfully complete the following trainings provided by Airbus after recruitment: ■ Health & Safety ■ General aircraft familiarization ■ Quality trainings Preferred: Training from a vocational school or previous employer in the use of application tools and in application techniques. Experience: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torqueing tools Preferred: 5+ years minimum experience in Aviation Production Knowledge, Skills, Demonstrated Capabilities: ● Knowledge of station safety, quality (clean as you go/FOD) and OSHA regulations. Communication Skills: ● Effective verbal and written communication skills. Technical Systems Proficiency: ● Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 30lbs/14kg. Pushing/Pulling: able to push/pull items in office areas. Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time Standing: able to stand for extended periods of time delivering information. Travel: able to travel overseas and domestically sometimes for extended periods of time. Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Assembly & Integration ------ Job Posting End Date: 12.27.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

The production line worker is responsible for participating in the manufacturing process of the production line. Each production worker will be trained in different positions for flexing the workforce. We are looking for high energy dependable individuals that are motivated and willing to learn. ESSENTIAL DUTIES AND RESPONSIBILITIES Treat all coworkers with dignity and respect regardless of gender, race, national origin, age, religions, sexual orientation, or disability. Maintain a safe and clean department. Follow all established safety practices. Maintain high productivity numbers. Act professionally and remain focused while working Follow direction of leadership Perform cleaning activities as required Maintain a positive attitude Additional responsibilities as assigned by management Follow production instructions in accordance with Standard Operating Procedures to meet manufacturing standards. Operate machinery and monitor items on a high-speed continuous production line including sewing and quality assurance by visually inspecting product for deviations. Ensure high quality products are produced Overtime hours may be required based on work demand. Employees must be flexible with the work hours needed. QUALIFICATIONS & SKILLS Previous production line and/or sewing experienced desired. If there is no previous experience in sewing operations, training is available for those with a high motivation to learn. Must be able to work in a team setting. Ability to follow detailed instructions/detailed oriented Ability to follow and understand schedules and process Ability to multi-task Ability to stand for 8-10 hours a day Ability to work independently without close supervision Ability to work flexible hours and overtime when required Must have strong work ethic Must be okay with repetitive movement. The ability for bending, lifting, and twisting Ability for working in a fast-paced environment PHYSICAL DEMANDS The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to stand; walk; sit; use hands to finger, handle, or feel; reach with hands and arms; and talk or hear. The employee frequently is required to stoop, kneel, crouch, bend, twist or crawl. The employee must repetitively lift and/or move up to 40 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception, and ability to adjust focus. OTHER DUTIES AS ASSIGNED This job description is an overview of the scope of responsibilities for this job and is not intended to be an inclusive list of job tasks and expectations. With the evolution of Exxel Outdoors, LLC, the responsibilities of this position may change. The job must be prepared to accept new responsibilities and transfer others. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran. 6:00 a.m. to 4:30 p.m. Monday-Thursday.

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** * Notice: Know Your Rights: Workplace Discrimination is Illegal * Notice: Pay Transparency Nondiscrimination (English) * Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus Mobile Manufacturing Site (MMS) is looking for an Aircraft Structures Assembler to join our production team in Mobile, AL. Meet the Team: The team at the Airbus U.S. Manufacturing facilities help assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your Working Environment: Nearby on 'Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How We Care for You: * Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") * Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. * Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. * Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. Your Challenges: Position Summary: Responsible for the structural installation of parts and major components in the manufacturing of the aircraft within the assigned station area. Primary Responsibilities: ● Perform repair work (concessions/discrepancies). ● Positioning and assembly of components. ● Rework of external skin damage of the aircraft. ● Work in compliance with production orders, design documents, concessions and inspection procedures. ● Prepare and solve queries, ensure follow-up and give feedback. ● Examine and sort work orders and drawings. ● Prepare job station for daily activity. ● Perform other duties as assigned. Qualified Experience / Skills / Training: Education: Required: High school diploma or GED. The ability to successfully complete the following trainings provided by Airbus after recruitment: ■ Health & Safety ■ General aircraft familiarization ■ Quality trainings Preferred: Training from a vocational school or previous employer in the use of application tools and in application techniques. Experience: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torqueing tools Preferred: 5+ years minimum experience in Aviation Production Knowledge, Skills, Demonstrated Capabilities: ● Knowledge of station safety, quality (clean as you go/FOD) and OSHA regulations. Communication Skills: ● Effective verbal and written communication skills. Technical Systems Proficiency: ● Able to enter, generate and retrieve information using a computer (SAP and Excel knowledge required) Physical Requirements: * Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions * Hearing: able to hear sufficiently to engage in conversation in office settings. Able to hear safety alerts and warning signals. * Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. * Equipment Operation: Able to operate a wide range of tools and equipment including hydraulic lifts and arms. * Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. * Lifting: able to occasionally lift up to 30lbs/14kg. * Pushing/Pulling: able to push/pull items in office areas. * Sitting: able to sit for extended periods of time at the computer and in meetings. ∙ * Squatting/Kneeling: Able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. * Confined Space: able to enter and exit a 12" x 22" passage and work through a 9.7" x 17.7" opening while using a respirator within a confined space for various lengths of time. * Heights: able to work at heights of approximately 40 feet on various types of platforms and lifts for various lengths of time * Standing: able to stand for extended periods of time delivering information. * Travel: able to travel overseas and domestically sometimes for extended periods of time. * Walking: able to walk through office and production areas, around flightline and airstrips and sometimes on uneven indoor and/or outdoor surfaces. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Professional Remote Type: Job Family: Assembly & Integration * ----- Job Posting End Date: 12.27.2025 * ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Our company, Closet Factory, is the custom storage solution authority serving the worldwide need for custom space organization throughout the home. We design, sell and install custom closets, home offices, garages, home theaters, pantries, bookshelves and more. Our products are of the highest quality. We have been in business for over 40 years and have locations across the country. We have experienced substantial, long-term growth and as a result are searching for another member to add to our close-knit team of people to manufacture our products. Our factory produces all of the wood parts to our complete product line using the 32-millimeter system. Members of our factory prepare each job and check it for accuracy and quality before it is sent to the client's home. Job Benefits: * Full-time, permanent positions * Year round work * Best Training in the Industry * Continual Support * We have never had a lay-off in our entire history! * Climate Controlled Factory Specific requirements: * Experience with basic hand tools * Some woodworking experience a plus We recognize people as our most valuable asset and will train you to excel in your position. A future with Closet Factory has never been brighter. If you are thinking about taking the next big step in your career, this may be the opportunity you have been waiting for.

The Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency. Monday-Thursday: 6:30am-5:15pm CORE FUNCTIONS Follow established work instructions to properly assemble products and/or different parts of products. Achieve established goals or deadlines set for specific work areas. Operate required equipment per safety guidelines, which may include wearing safety shoes, gloves, hearing protection, and eye protection. Complete all required paperwork and/or data entry. May work at different workstations as production needs require. Attendance and dependability are essential job functions. Required to report to work on time and follow attendance guidelines. Perform other duties as assigned. QUALIFICATIONS & REQUIREMENTS Education and Experience High school diploma or general education degree (GED) preferred. 1-3 months of related experience and/or training preferred. Required Licenses None Skills, Abilities, and Knowledge Ability to read and interpret documents such as safety rules, work instructions, operating and maintenance instructions, and procedure manuals. Ability to perform basic math. Ability to read and interpret measurements accurately. Travel None COMPETENCIES Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Responds promptly to customer needs; Responds to requests for service and assistance; Meets commitments. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed. Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. SUPERVISOR RESPONSIBILITIES Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities This position is subject to the following physical activities: reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Visual Acuity The worker is required to have visual acuity to perform an activity such as operating machines such as drill presses, press brake, power saws and mills where the seeing job is at or within arm's reach, performing mechanical or skilled trades' tasks of a non-repetitive nature. Working Conditions The worker is subject to an inside environment with conditions, including heat, noise, vibration, and hazards from a production-based environment.

Job Description The Production Assembler plays a crucial role in the manufacturing process, contributing to the manufacture of high-quality products. Responsible for executing assembly tasks according to the work instructions, this role requires precision, attention to detail, and adherence to quality standards. The Production Assembler must achieve set production goals, maintain a safe and clean work environment, and leverage Lean manufacturing tools to enhance efficiency. Monday-Thursday: 6:30am-5:15pm CORE FUNCTIONS Follow established work instructions to properly assemble products and/or different parts of products. Achieve established goals or deadlines set for specific work areas. Operate required equipment per safety guidelines, which may include wearing safety shoes, gloves, hearing protection, and eye protection. Complete all required paperwork and/or data entry. May work at different workstations as production needs require. Attendance and dependability are essential job functions. Required to report to work on time and follow attendance guidelines. Perform other duties as assigned. QUALIFICATIONS & REQUIREMENTS Education and Experience High school diploma or general education degree (GED) preferred. 1-3 months of related experience and/or training preferred. Required Licenses None Skills, Abilities, and Knowledge Ability to read and interpret documents such as safety rules, work instructions, operating and maintenance instructions, and procedure manuals. Ability to perform basic math. Ability to read and interpret measurements accurately. Travel None COMPETENCIES Adapts to changes in the work environment; Manages competing demands; Changes approach or method to best fit the situation; Able to deal with frequent change, delays, or unexpected events. Responds promptly to customer needs; Responds to requests for service and assistance; Meets commitments. Follows instructions, responds to management direction; Takes responsibility for own actions; Keeps commitments; commits to long hours of work when necessary to reach goals. Completes tasks on time or notifies appropriate person with an alternate plan. Demonstrates accuracy and thoroughness; Looks for ways to improve and promote quality; Applies feedback to improve performance; Monitors own work to ensure quality. Observes safety and security procedures; Reports potentially unsafe conditions; Uses equipment and materials properly. Balances team and individual responsibilities; Exhibits objectivity and openness to other views; Gives and welcomes feedback; Contributes to building a positive team spirit; Puts success of team above own interests; Supports everyone's efforts to succeed. Speaks clearly and persuasively in positive or negative situations; listens and gets clarification; Responds well to questions; Demonstrates group presentation skills; Participates in meetings. SUPERVISOR RESPONSIBILITIES Individual Contributor: working team member with no oversight of others and no management responsibilities. PHYSICAL REQUIREMENTS This position is subject to Medium Work: Exerting up to 50 pounds of force occasionally and/or up to 20 pounds of force frequently, and/or up to 10 pounds of force constantly to move objects. Physical Activities This position is subject to the following physical activities: reaching, standing, walking, pushing, pulling, lifting, grasping, feeling, talking, hearing, and repetitive motions. Visual Acuity The worker is required to have visual acuity to perform an activity such as operating machines such as drill presses, press brake, power saws and mills where the seeing job is at or within arm's reach, performing mechanical or skilled trades' tasks of a non-repetitive nature. Working Conditions The worker is subject to an inside environment with conditions, including heat, noise, vibration, and hazards from a production-based environment.

Job DescriptionDescription: Merl, Inc seeks a skilled, self-motivated individual to join our team as an Assembly Technician at our Montgomery, Alabama location. This is an entry-level position with preference given to applicants who have experience working with sheet metal. The ideal candidate will be mechanically inclined and able to excell in a fast-paced environment with opportunity for advancement. There will be an evaluation and possibility for a merit increase upon successful completion of the training period. Requirements: · Fabricating Sheet metal to include precision bending and riveting · Soldering/brazing of sheet metal · Assembly involving reading and understanding instructions and blueprints using hand tools and measuring devices · Wiring, cutting and stripping in application of fasteners

will serve our Water Heating Division, located in Montgomery, Alabama. High School Diploma or Equivalent (GED, Secondary School Diploma, etc.). 1+ years experience in manufacturing environment. The ability to work from written or verbal orders. The ability to read and write in English. Attention to Detail. Basic Math. Reading/Writing Comprehension. Work Environment: May be exposed to high noise levels. Physical Demands: Continuous lifting of 5-25 lbs; Frequent lifting of 25-60 lbs; Occasional lifting of 60+ lbs. Must be able to walk, stand, and/or lift repetitively during shift. Will be required to assemble metal units or parts contributing to the forming of a complete water heater or sub-assembly using hand tools, air powered tools and/or jigs. Will be required to use repetitive motions assembling parts, nuts, bolts, and screws. Must be able to use common sense in determining whether simple adjustments are to be made to ensure proper/correct positioning of parts or tools. Make common sense decisions to reject faulty parts if necessary. May be utilized in various positions as deemed necessary to supervisor. Must be able to do job properly and keep up with production. Must be able to sit, stand, stoop, and kneel for long periods of time. Assembler must regularly lift and move in repetitive motions to carry out job duties. Assembler will occasionally be exposed to fumes or airborne particles. Assembler will occasionally work near moving mechanical parts and is occasionally exposed to wet and/or humid conditions. Maintain good housekeeping in work area. Work from written or verbal orders. Report any tool/machine malfunctions to Leadman or Supervisor. Observe all departmental safety requirements. Inspect units or parts for defects and workmanship. Perform other related duties as required by supervisor.

GRIFFIN has a NEW CLIENT in HUNTSVILLE! COME WORK for US! Our client is seeking an experienced SI Assembler!! Minimum of 6 months experience in assembling military cable and wire harness assemblies is highly preferred. IPC/WHMA-A-620 Certification a plus. 1ST SHIFT Essential Functions and Competencies Demonstrate good component recognition skills Understanding of basic computer skills Effective interpersonal skills Demonstrate high attention to detail Demonstrate discretion, confidentiality and professionalism when representing our client. Ability to work overtime as needed Ability to work with diverse groups Participate in a continuous improvement activity Ability to read, write and perform basic math Qualifications / Education / Experience Reading drawing, using tools, commutation with co-workers and supervisor, dealing with multiple jobs at any given time. Ability to follow a process. Review Drawings, Bills of Material, Part Description of Mechanical Parts, Fasteners, Wires, Connectors, Washers, Spacers, and similar types of parts Assemble kits using kitting instructions with accurately reading parts, quantities, revisions Assemble Wire Harness, Cable Assemblies using shop tools such was wrenches, torque drivers, hand tools, thread gages, Go - No-Go Gages Accurately assemble Electrical and or Mechanical Parts using either an example or from Assembly drawings or Instructions Fill forms, record data, verify count accuracy, check assembly description, dimensions, size, color Accesses the appropriate paperwork and necessary drawings for each job assignment Verifies kits, enters Batch lot information, package and label accessory items according to documented instructions Uses appropriate mats and all required tooling Checks equipment (torque wrenches, screwdrivers, etc.) to ensure proper performance Uses manufacturing routings and process instructions under close supervision May assemble a variety of systems integration subassemblies Notifies leadership of any shut down situations Enters data into Process Feedback System (PFS) and link subassemblies to final unit Enters quantities into Operations Complete (Baan) when required All employees are responsible for the Quality of their work to ensure BEI meets, or exceeds Customer Satisfaction. A background and previous work experience in Aerospace, Aviation, Defense, Military, Army with a similar experience is considered a plus Minimum of 6 months experience in assembling military cable and wire harness assemblies is highly preferred.h a similar experience is considered a plus • High School Diploma or equivalent • Ability to perform unpacking and teardown activities (systems integration • Minimum of 6 months experience in assembling military cable and wire harness assemblies is highly preferred. • IPC/WHMA-A-620 Certification a plus. SEND YOUR RESUME TODAY!

The Bakery Production Worker rotates throughout several tasks in a production environment including filling, wrapping, and packaging product while adhering to food safety and quality procedures. Job Responsibilities * Operates and supervises continuous production line * Rotates among duties including the filler machine, wrapper machine, packing boxes, stacking boxes, etc. * Visually inspects product for quality and quantity * Reports all equipment issues to the supervisor or manager in a timely manner * Understands and follows all safety procedures that apply to daily operations * Maintains a safe and clean environment by following all safety policies and procedures * Maintains excellent customer service and positive demeanor towards guests, customers, clients, co-workers, etc. * Adheres to Aramark and OSHA safety policies and procedures including proper food safety and sanitation * Ensures security of company and client assets At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. Qualifications * Previous experience in a bakery production or related role preferred * Validated knowledge of bakery production methods and standards * Validated Knowledge of food safety regulations such as proper food handling, sanitation, and storage * Must be able to obtain a food safety certification * Demonstrates basic math and counting skills * Requires repetitive motion with hands and arms * Requires ability to stand and walk for the duration of shift. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). Education About Aramark Our Mission Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. About Aramark The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ***************************** or connect with us on Facebook, Instagram and Twitter. Nearest Major Market: Montgomery

This person will be responsible for electrical assembly in a production environment. We are a company committed to creating diverse and inclusive environments where people can bring their full, authentic selves to work every day. We are an equal opportunity/affirmative action employer that believes everyone matters. Qualified candidates will receive consideration for employment regardless of their race, color, ethnicity, religion, sex (including pregnancy), sexual orientation, gender identity and expression, marital status, national origin, ancestry, genetic factors, age, disability, protected veteran status, military or uniformed service member status, or any other status or characteristic protected by applicable laws, regulations, and ordinances. If you need assistance and/or a reasonable accommodation due to a disability during the application or recruiting process, please send a request to ********************.To learn more about how we collect, keep, and process your private information, please review Insight Global's Workforce Privacy Policy: **************************************************** Skills and Requirements High school diploma 3+ years as an Electrical assembler - IPC/WHMA-A-620 - ISO 9001 - NASA-STD-8739.4 (good, though not essential)

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at ******************** Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminación (Spanish) Job Description: Airbus US Manufacturing Facility is looking for at Aircraft Structures Assembler to join our Team based in Mobile, AL Meet the team: The team at the Airbus U.S. Manufacturing facilities assemble the finest aircraft in the world, along two (soon to be three) production lines for the A220 and A320 Family aircraft. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. Your working environment: Nearby on ‘Airbus Way' you will find the Airbus U.S. Manufacturing Facility for commercial aircraft. Opened at the Mobile Aeroplex at Brookley in 2015, the facility produces A320 Family aircraft and added a second product line for the A220 in 2019. The facility, which strengthens the U.S. aerospace industry, is part of Airbus' strategy to enhance its global competitiveness by meeting the growing needs of its customers in the United States and beyond. How we care for you: Financial Rewards: Competitive base salary, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan (“ESOP”) Work/Life Balance: Paid time off including personal time, holidays and a generous paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical (traditional and high-deductible health plans), prescription, dental, vision, life, disability, Employee Assistance Plan (“EAP”) and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path as well as the opportunity to participate in accelerated development programmes and both national and international mobility. At Airbus, we support you to work, connect and collaborate more easily and accessibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking. Your challenges: Primary Responsibilities Perform repair work (concessions/discrepancies).• Positioning and assembly of components. Rework of external skin damage of the aircraft. Work in compliance with production orders, design documents, concessions and inspection procedures. Prepare and solve queries, ensure follow-up and give feedback. Examine and sort work orders and drawings. Prepare a job station for daily activity. Perform other duties as assigned. Your boarding pass: Required: 2 years minimum experience in Aviation Production or equivalent Previous hands-on experience with drilling tools, templates, drilling machines, fasteners, and torquing tools. Preferred: 5+ years minimum experience in Aviation Production. Physical Requirements: Vision: adequate to enter and read material on computer screens. Able to identify individuals to initiate greetings, the giving of directions and other business interactions Hearing: able to hear sufficiently to engage in conversation in office settings; Able to hear safety alerts and warning signals. Speaking: able to engage in conversations in person and via electronic means and deliver information to groups of varying size with or without amplification. Carrying: able to occasionally carry up to 20lbs/9kg while engaging in training, addressing production issues or as part of continuous improvement projects. Lifting: able to occasionally lift up to 30lbs/14kg. Pushing/Pulling: able to push/pull items in office areas and on the shop floor. Sitting: able to sit for extended periods of time at the computer and in meetings. Squatting/Kneeling: able to occasionally squat or kneel to retrieve or replace items shelved on bottom shelves. Standing: able to stand for extended periods of time delivering information. Travel/Mobility: able to travel overseas and domestically sometimes for extended periods of time and on short notice. Walking: able to walk through office and production areas, around flight line and airstrips and sometimes on uneven indoor or outdoor surfaces other business interactions Space Limitations: Working on jigs at the fuselage at a height of 15 feet. Take your career to a new level and apply online now! This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. Company: Airbus Americas, Inc. Employment Type: US - Direct Hire Experience Level: Entry Level Remote Type: On-site Job Family: Assembly & Integration ------ Job Posting End Date: 10.31.2025 ------ Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to ****************.

Job Description Our company, Closet Factory, is the custom storage solution authority serving the worldwide need for custom space organization throughout the home. We design, sell and install custom closets, home offices, garages, home theaters, pantries, bookshelves and more. Our products are of the highest quality. We have been in business for over 40 years and have locations across the country. We have experienced substantial, long-term growth and as a result are searching for another member to add to our close-knit team of people to manufacture our products. Our factory produces all of the wood parts to our complete product line using the 32-millimeter system. Members of our factory prepare each job and check it for accuracy and quality before it is sent to the client's home. Job Benefits: Full-time, permanent positions Year round work Best Training in the Industry Continual Support We have never had a lay-off in our entire history! Climate Controlled Factory Specific requirements: Experience with basic hand tools Some woodworking experience a plus We recognize people as our most valuable asset and will train you to excel in your position. A future with Closet Factory has never been brighter. If you are thinking about taking the next big step in your career, this may be the opportunity you have been waiting for.

The Bakery Production Worker rotates throughout several tasks in a production environment including filling, wrapping, and packaging product while adhering to food safety and quality procedures. **Job Responsibilities** + Operates and supervises continuous production line + Rotates among duties including the filler machine, wrapper machine, packing boxes, stacking boxes, etc. + Visually inspects product for quality and quantity + Reports all equipment issues to the supervisor or manager in a timely manner + Understands and follows all safety procedures that apply to daily operations + Maintains a safe and clean environment by following all safety policies and procedures + Maintains excellent customer service and positive demeanor towards guests, customers, clients, co-workers, etc. + Adheres to Aramark and OSHA safety policies and procedures including proper food safety and sanitation + Ensures security of company and client assets At Aramark, developing new skills and doing what it takes to get the job done make a positive impact for our employees and for our customers. In order to meet our commitments, job duties may change or new ones may be assigned without formal notice. **Qualifications** - Previous experience in a bakery production or related role preferred - Validated knowledge of bakery production methods and standards - Validated Knowledge of food safety regulations such as proper food handling, sanitation, and storage - Must be able to obtain a food safety certification - Demonstrates basic math and counting skills - Requires repetitive motion with hands and arms - Requires ability to stand and walk for the duration of shift. This role may have physical demands including, but not limited to, lifting, bending, pushing, pulling and/or extended walking and standing. This role may also require uniforms and/or usage of Personal Protective Equipment (PPE). **Education** **About Aramark** **Our Mission** Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. At Aramark, we believe that every employee should enjoy equal employment opportunity and be free to participate in all aspects of the company. We do not discriminate on the basis of race, color, religion, national origin, age, sex, gender, pregnancy, disability, sexual orientation, gender identity, genetic information, military status, protected veteran status or other characteristics protected by applicable law. **About Aramark** The people of Aramark proudly serve millions of guests every day through food and facilities in 15 countries around the world. Rooted in service and united by our purpose, we strive to do great things for each other, our partners, our communities, and our planet. We believe a career should develop your talents, fuel your passions, and empower your professional growth. So, no matter what you're pursuing - a new challenge, a sense of belonging, or just a great place to work - our focus is helping you reach your full potential. Learn more about working here at ***************************** or connect with us on Facebook , Instagram and Twitter . **Nearest Major Market:** Montgomery

ASSEMBLY *Some manufacturing experience preferred 8 Hour Shifts *Will Train 1st Shift M-F 7AM to 4PM 2nd Shift M-F 4PM to 12AM 3 rd Week Starts *Sunday 12AM to 8AM Growth Opportunities Friendly Company *Paid WEEKLY NO Sundays PPE: Jeans, T-Shirts, *Full Shoe *NO Steel Toes Required Requires: H.S. Diploma or GED Benefits: Raises, Bonuses, Medical, Dental, Life, and more… **INTERVIEW Call ************