Automation & controls engineer work from home jobs

SummaryThe Lead Protection & Control Engineer works on T&D substations for AC, HVDC and FACTS projects with designers, peer engineers & leaders. The engineer is responsible to define, design, coordinate all technical aspects of HV / EHV substation protection & control and oversee technical plant integration and optimization at project level considering safety, quality, schedule and cost criteria. The engineer should have great attention to detail with a can-do attitude & customer responsiveness. The Lead Protection & Control Engineer may be identified as project engineer for small to medium size project, which are highly secondary engineering focused. The engineer shall continuously update themselves with new technology and have a mindset of continuous learning, consistent with grid transition needs. Responsible for departmental operations planning/execution or is focused on execution of professional activities within a technical discipline. Functions with some autonomy but guided by established policies or review of end results.Job Description About Us: Come bring your energy to change the world! Grid Solutions, part of the GE Vernova portfolio of energy businesses, serves customers globally with over 12,000 employees. Grid Solutions provides equipment, systems, and services to bring power reliably and efficiently from the point of generation to end power consumers. We electrify the world with advanced grid technologies and accelerate the energy transition. GE Vernova, a dynamic accelerator comprised of our Power, Renewable Energy, Digital and Energy Financial Services businesses, is focused on leading a new era of energy - electrifying the world while simultaneously working to decarbonize it. If you are ready to make a difference and usher in a new era of energy, come join us. Why we come to work: At GE Vernova, we are always up for the challenge - and we're always driven to find the best solution. Our projects are unique and interesting, and you'll need to bring a solution-focused, positive approach to each one to do your best. Surrounded by committed, loyal colleagues, if you can dare to bring your ingenuity and desire to make an impact, you'll be exposed to game-changing, diverse projects that truly allow you to play your part in the green energy transition. Essential Responsibilities: Ultimately be responsible for design of protection schemes for all kinds of T&D substations, Data Centers, Industrial, BESS applications including one-lines, three-lines, AC / DC schematics, and relay settings. Lead a local or remote design team to develop panel and interconnect wiring as well as panel layouts and elevations Evaluate the interoperability, control features, and communication / protocol aspects of IED's serving as protection relays to provide an integrated solution including SCADA, Cyber Security and Telecom needs. Be familiar with IEC 61850 process and system bus architecture and its implementation for substations Coordinate with and provide technical assistance to SCADA engineers, substation physical engineers, and control design staff in order to fully develop system integration of protection, control, and monitoring systems. Work with team to meet project specifications, cost control, and schedule objectives Interface with internal and external team members such as Lead engineers, Project Engineers, Electrical Designers, Physical Designers, Draftsmen, Project managers, Sourcing, and support organizations Review power system load flow studies, fault studies, relay setting coordination, and transient studies performed by other agencies Train end-users on the theory, operational use, and maintenance of integrated protection and control systems Lead or support factory acceptance testing and site testing & commissioning Develop outage, cut-over, and testing procedures Define processes, procedures, perform RCA's (Root Cause Analysis), perform corrective actions, and validate process control. Support quality initiatives including aspects of ISO9002 Work on development of proposals including: writing and/or reviewing technical specifications, estimating design man-hours and materials, supporting sourcing for vendor quotations, and the development of clarifications and exceptions as well as technical responses and performing technical validation. Demonstrate leadership behaviors of acting with humility, lead with transparency and deliver with focus Requirements: Bachelor's Degree in Electrical Engineering or similar degree from an accredited university. Minimum 5 years of experience in system protection schemes, relay selection, primary equipment interface requirements, operational analysis, communication systems and maintenance practices for transmission, distribution, and generation protection applications at both AIS and GIS substations. Ability and willingness to travel up to 20% of the time, including international, for meetings and on-site commissioning tests for customer installations and comply with all relevant company travel and tax policies Desired Characteristics: P.E. License or EIT with willingness to pursue and acquire P.E certification. Extensive experience in protective relaying coordination and practices. Good understanding of circuit breakers, fuses, circuit switchers, transformers, shunt reactors, cap banks, harmonic filters, HVDC and FACTS systems used in the control of power flow, detection and isolation of power system faults. Fluent in English. Strong influencing and relationship building skills. Demonstrated presentation skills and ability to succinctly communicate complex messages. Experience in technical problem solving. Mastering of sec engineering discipline (process, tools and technical aspects) Demonstrates ownership and accountability, judgment and decision making and has passion for the functional role. We deliver integrated project solutions to enable large scale electrification and support our customer needs. ______________________________________________________________________________ À propos de nous: Venez apporter votre énergie pour changer le monde Grid Solutions, qui fait partie du portefeuille d'activités énergétiques de GE Vernova, sert des clients dans le monde entier avec plus de 12 000 employés. Grid Solutions fournit des équipements, des systèmes et des services pour acheminer l'électricité de manière fiable et efficace du point de production jusqu'aux consommateurs finaux. Nous électrisons le monde grâce à des technologies de réseau avancées et accélérons la transition énergétique. GE Vernova, un accélérateur dynamique composé de nos activités Énergie, Énergies renouvelables, Numérique et Services financiers énergétiques, se concentre sur la direction d'une nouvelle ère énergétique - en électrifiant le monde tout en travaillant simultanément à le décarboner. Si vous êtes prêt à faire la différence et à inaugurer une nouvelle ère énergétique, rejoignez-nous. Pourquoi nous venons travailler : Chez GE Renewable Energy, nos ingénieurs sont toujours prêts à relever le défi et nous sommes toujours déterminés à trouver la meilleure solution. Nos projets sont uniques et intéressants, et vous devrez apporter à chacun une approche positive et axée sur les solutions pour faire de votre mieux. Entouré de collègues engagés et fidèles, si vous osez apporter votre ingéniosité et votre envie d'avoir un impact, vous serez exposé à des projets diversifiés et révolutionnaires qui vous permettront véritablement de jouer votre rôle dans la transition énergétique verte. Essential Responsibilities: Être finalement responsable de la conception de schémas de protection pour tous les types de sous-stations T&D, de centres de données, d'applications industrielles et BESS, y compris les schémas unifilaires, trifilaires, les schémas AC / DC et les réglages de relais. Diriger une équipe de conception locale ou à distance pour développer le câblage des panneaux et des interconnexions ainsi que les agencements et élévations des panneaux. Évaluer l'interopérabilité, les fonctionnalités de contrôle et les aspects de communication/protocole des IED servant de relais de protection pour fournir une solution intégrée incluant les besoins en SCADA, cybersécurité et télécommunications. Être familiarisé avec l'architecture de bus de processus et de système IEC 61850 et son implémentation pour les sous-stations. Coordonner et fournir une assistance technique aux ingénieurs SCADA, aux ingénieurs physiques de sous-station et au personnel de conception de contrôle afin de développer pleinement l'intégration des systèmes de protection, de contrôle et de surveillance.Travailler avec l'équipe pour respecter les spécifications du projet, le contrôle des coûts et les objectifs de calendrier. Interagir avec les membres internes et externes de l'équipe tels que les ingénieurs principaux, les ingénieurs de projet, les concepteurs électriques, les concepteurs physiques, les dessinateurs, les chefs de projet, les équipes d'approvisionnement et les organisations de support. Examiner les études de flux de charge du système électrique, les études de défauts, la coordination des réglages de relais et les études transitoires réalisées par d'autres agences. Former les utilisateurs finaux sur la théorie, l'utilisation opérationnelle et la maintenance des systèmes intégrés de protection et de contrôle. Diriger ou soutenir les tests d'acceptation en usine et les tests et la mise en service sur site Développer des procédures de coupure, de transition et de test Définir les processus, les procédures, effectuer des RCA (Analyse des Causes Racines), mettre en œuvre des actions correctives et valider le contrôle des processus.Soutenir les initiatives de qualité, y compris les aspects de l'ISO9002. Travailler sur le développement de propositions incluant : la rédaction et/ou la révision de spécifications techniques, l'estimation des heures de conception et des matériaux, le soutien à l'approvisionnement pour les devis des fournisseurs, ainsi que le développement de clarifications et d'exceptions ainsi que de réponses techniques et la validation technique. Démontrer des comportements de leadership en agissant avec humilité, en dirigeant avec transparence et en livrant avec concentration. Exigences : Avoir obtenu un baccalauréat en génie électrique ou un diplôme similaire d'une université accréditée. Au moins 5 ans d'expérience dans les schémas de protection des systèmes, la sélection des relais, les exigences d'interface des équipements principaux, l'analyse opérationnelle, les systèmes de communication et les pratiques de maintenance pour les applications de protection de transmission, de distribution et de production dans les sous-stations AIS et GIS. Capacité et volonté de voyager jusqu'à 20 % du temps, y compris à l'international, pour des réunions et des tests de mise en service sur site pour les installations des clients et de se conformer à toutes les politiques pertinentes en matière de voyages et de fiscalité de l'entreprise. Caractéristiques souhaitées : P.E. Licence ou EIT avec volonté de poursuivre et d'acquérir la certification P.E. Vaste expérience dans la coordination et les pratiques de relais de protection. Bonne compréhension des disjoncteurs, des fusibles, des commutateurs de circuits, des transformateurs, des réacteurs shunt, des bancs de capuchons, des filtres harmoniques, des systèmes HVDC et FACTS utilisés dans le contrôle du flux d'énergie, la détection et l'isolation des défauts du système électrique. Anglais courant. Solides compétences d'influence et d'établissement de relations. Compétences démontrées en matière de présentation et capacité à communiquer de manière succincte des messages complexes. Expérience en résolution de problèmes techniques. Maîtrise de la discipline de l'ingénierie sec (procédés, outils et aspects techniques) Fait preuve d'appropriation et de responsabilité, de jugement et de prise de décision et est passionné par le rôle fonctionnel. Nous proposons des solutions de projets intégrées pour permettre une électrification à grande échelle et répondre aux besoins de nos clients. GE Vernova offers a great work environment, professional development, challenging careers, and competitive compensation. GE Vernova is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law. GE Vernova will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: Yes #LI-Remote - This is a remote position Application Deadline: December 26, 2025For candidates applying to a U.S. based position, the pay range for this position is between $98,400.00 and $164,000.00. The Company pays a geographic differential of 110%, 120% or 130% of salary in certain areas. The specific pay offered may be influenced by a variety of factors, including the candidate's experience, education, and skill set.Bonus eligibility: discretionary annual bonus.This posting is expected to remain open for at least seven days after it was posted on December 08, 2025.Available benefits include medical, dental, vision, and prescription drug coverage; access to Health Coach from GE Vernova, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling and referral services. Retirement benefits include the GE Vernova Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and financial planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability benefits, life insurance, 12 paid holidays, and permissive time off.GE Vernova Inc. or its affiliates (collectively or individually, “GE Vernova”) sponsor certain employee benefit plans or programs GE Vernova reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a GE Vernova welfare benefit plan or program. This document does not create a contract of employment with any individual.

Job Description - Controls Engineer: Currently seeking a highly skilled Controls Engineer to join a team of high performers in their efforts to help their clients get better, stronger, and faster through automation. In this role, you will be responsible for the design, configuration, implementation, and optimization of industrial control systems, primarily utilizing Rockwell Automation platforms. Your responsibilities will include leading complex projects from design to commissioning, integrating advanced communication networks, ensuring compliance with industry standards and continuously improving system reliability. You will work directly with clients to guide them through system upgrades and enhancements. Appealing Factors of This Opportunity- Controls Engineer: Ability to work from home as project demands allow Limited travel Opportunity to be part of an established organization with a strong backlog of work that can provide longevity and stability Comprehensive, competitive compensation and benefit package A feeling of significance; this will be a very important role where your contributions will be visible Duties & Responsibilities- Controls Engineer: Design, program, and troubleshoot process control logic primarily using but not exclusive to Rockwell Automation Control Platforms, including Logix RS5000 and RS500. Develop and maintain Human Machine Interfaces (HMIs) using FactoryTalk SE, FactoryTalk ME, Wonderware, and Ignition platforms. Integrate PLCs, DCS, SCADA systems, and associated field devices to ensure seamless operation and data exchange. Design and configure automation networks, including VLAN segmentation, QoS, and redundant architectures. Implement communication protocols such as EtherNet/IP, PROFINET, Modbus TCP, and OPC UA. Configure and manage Cisco/Stratix switches and routers to ensure secure, reliable communication between OT and IT networks. Collaborate with cybersecurity teams to adhere to best practices and industry standards (e.g., IEC 62443) for securing operational technology environments. Serve as the lead through all project phases: concept and basic design, detailed design, construction, commissioning, qualification, and final handover. Serve as a key point of contact for clients, guiding them through system upgrades, modernization initiatives, and technology transitions. Monitor system performance, identify inefficiencies, and implement improvements to enhance reliability, uptime, and throughput. Conduct root cause analysis and support predictive and preventive maintenance programs. Create and maintain detailed documentation, including network diagrams, control logic schematics, device configuration files, test protocols, and standard operating procedures. Travel to client sites for system installation, commissioning, troubleshooting, and training as required (10-15% out of town maximum; most client sites are in the KC Metro or immediately surrounding). Qualifications & Skills- Controls Engineer: BS degree in Engineering (Electrical, Mechanical, Chemical, or related field) or equivalent experience required. 5+ years of experience working with Rockwell Automation platforms (ControlLogix, RSLogix 5000, RSLogix 500). Proven experience with PLC programming, SCADA/HMI development, and OT network design. Familiarity with Cisco/Stratix network programming and industrial cybersecurity best practices. Process control experience in industries such as manufacturing, pharmaceuticals, energy, or similar. Excellent communication and client-facing skills; able to explain technical concepts to non-technical stakeholders.

THE ROLE Senior Controls Engineers work in both an office environment when engineering control systems and on the shop floor in Van Wert Ohio for commissioning and debug of equipment. The Senior Controls Engineers work closely with the Mechanical Designers, Electrical Designers, and Machine Assembly personnel as required. They work alongside Project Managers and work with a cross-functional team to design systems and develop code for complex automation projects. This position offers flexibility for employees to work from remote. Job Description: Provide controls programming of special machinery and robotics equipment for the automotive, consumer goods, and food packaging industries with little to no supervision. Have the ability to perform controls programming in various ladder logic platforms, HMI, VFD, and servo motion. Experience with Rockwell Automation products is a must. Experience with any of the following would be a plus: Omron, Mitsubishi, and Siemens. Experience with Fanuc, and Yaskawa robot platforms is required. Experience with Kuka, and ABB robots alongside the above is a plus Must be able to specify vision systems, and lighting along with the programming and setup associated with High-Level Machine Vision Inspection and Robotic Guided Vision platforms. Must have the ability to meet deadlines and take a project from start to finish. Must be able to lead projects both at our facility and at the customer's site. Must possess a good mechanical aptitude and the ability to troubleshoot systems from a mechanical, electrical, and process viewpoint. Applicant should be capable of designing system architecture for machine control systems, including electrical schematics and network diagrams. Must possess the ability to utilize miscellaneous historical and data collection database transaction managers to integrate the shop floor to the enterprise. Qualifications: 8+ years of experience preferred Related Bachelor's degree or equivalent work experience Able to conform to shifting priorities, demands, and timelines through analytical and problem-solving capabilities. Ability to interface with the customer in a professional manner Valid state motor vehicle operator's license Must possess Strong Project Management skills as it relates to the controls piece of a project. Must be organized, and able to utilize Gant Charts, Spread Sheets, and Microsoft One Note. Must be a self-starter, work well with others, and have a positive mental attitude Must be a creative thinker, results-oriented focused, and attentive to detail and accuracy. Must be willing to help train junior engineers and technicians. There are no direct reports associated with this position.

Actalent connects passion with purpose. We are supporting critical engineering and sciences initiatives that advance how companies serve the world. With almost 40 years of experience, our scalable talent solutions and engineering and sciences services provide the expertise our customers need to achieve more. The position falls within the Protection and Controls Department of the organization. The engineer will complete protection and control projects that support our customer. They will work with in-house and client engineers and designers. They will provide, coordinate, and conduct training to lower level engineers. Primary Duties and Responsibilities * Work on green-field and brown-field (retrofit) Protection and Control Projects in substations * Set relays and conduct relay setting calculations utilizing ASPEN, AcSELerator 5010 (SEL), and GE URPC Software * Design settings in appropriate format then issue to assigned Protection and Controls Supervisor using IPS * Mark-up and review protection schematics and elementaries * Utilize MOB Port to review equipment and materials established by substation engineers for Protection Designers * Work with the following equipment: transformers, circuit breakers, buses, reactors, line disconnects, protective relays systems (SEL, ABB, etc.), and SCADA systems * Function as a project lead for protection and control projects * Perform all engineering and design activities with minimum direction * Lead, facilitate, and coordinate work activities of others within the work group, team, department, or those external to complete substation projects * Provide training and guidance to lower level employees * Identify and initiate corrective action when substation project objectives are not being met * Interpret codes and regulations and develop standards for construction projects * Promote engineering professionalism and standards * Develop, recommend, and implement plans by establishing goals, objectives, and requirements that include all scheduling, resources, and cont information for complex engineering * Position requires 10-15% travel to field substations Education and Experience Requirements * Five to eight years of experience in utilities working with protection and controls * Five to eight years of experience completing engineering projects from start to finish * Five to eight years of experience setting relays and designing one line diagrams * Bachelor's Degree in Electrical Engineering (ABET) * Master's Degree in Electrical Engineering (ABET) will count toward years' experience * A PE License is required Requisite Abilities and Skills * Intermediate ability to perform design calculations such as battery sizing, AC and DC loads, system component selection, power transformer and circuit breaker selection, circuit protection, control and power cable selection and rating, bus bars, fittings, insulators, ground grid design, and lightning protection * Intermediate understanding of standards and codes such as IEEE, ANSI, NERC-PRC, NEC, and NESC * Possess intermediate understanding of protection and control equipment, relays, and fault analysis * Strong written and verbal communication * Possess ability to understand interrelationship between systems and component equipment * Demonstrate ability to work with others in supplying information and seeking assistance as necessary * Demonstrate willingness and capabilities to assume leadership roles Job Type & Location This is a Permanent position based out of Columbus, OH. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: • Medical, dental & vision • Critical Illness, Accident, and Hospital • 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available • Life Insurance (Voluntary Life & AD&D for the employee and dependents) • Short and long-term disability • Health Spending Account (HSA) • Transportation benefits • Employee Assistance Program • Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully remote position. Application Deadline This position is anticipated to close on Dec 22, 2025. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

Knauf Insulation North America is the world's fastest-growing insulation manufacturer. We are wholly committed to the conservation of the environment while also sustainably developing and manufacturing a comprehensive line of acoustical fiberglass insulation for residential, commercial, industrial, marine, OEM and metal building applications, using post-consumer recycled materials. We welcome passionate and creative individuals who thrive in an entrepreneurial, collaborative and ever-changing environment. We know how important your health, wellbeing, and financial strength is to you. To support you, we provide affordable benefits for you and your family members. "Supporting all aspects of the individual - self, health, wealth and community” Our benefits include: Medical, Dental, Vision - starting on day one! Virtual Medical Services 401(k) Retirement Plan (earn 100% matching on your first 6% and fully vested day one) Paid parental leave Company paid life insurance Vacation time to enjoy getting away Tuition Reimbursement Employee Assistance Program (EAP) Plus, more! Growth opportunities available! Apply online or contact us to hear why our employees appreciate being part of the Knauf family! Summary of Position: Join our team as an Electrical Project Engineer and play a pivotal role in driving innovation and excellence across our North American plants! In this dynamic position, you'll lead the design and project management of cutting-edge electrical and control systems, focusing on process improvements and optimizing machine performance. You'll have the opportunity to explore and implement advanced technologies that enhance safety, quality, and profitability. Your expertise will shine as you design and program PLCs, HMIs, Drives, and Servo systems, while managing contractor relationships and overseeing large-scale capital projects. Collaboration is key, as you'll work closely with teams across the company, contributing to the standardization of controls, networks, and power equipment. With approximately 30% travel (and more during exciting plant rebuilds), you'll experience hands-on involvement in transformative projects that make a real impact. If you're passionate about innovation, problem-solving, and making a difference, this role offers the perfect blend of technical challenges and rewarding opportunities. Join us and help shape the future of our facilities! Must be willing to relocate to one of our U.S. locations to be considered for the role (Relocation is provided): - Albion, MI - Lanett, AL - Inwood, WV - McGregor, TX - Shasta Lake, CA - Shelbyville, IN Responsibilities Lead and Oversee Large-Scale Capital Projects: Take ownership of major capital initiatives, ensuring successful execution from concept to completion. Design and Program Advanced Systems: Perform programming for Programmable Logic Controllers (PLC), Human-Machine Interfaces (HMI), Drives, and Servo systems to optimize performance and efficiency. Drive New Plant Projects and Equipment Upgrades: Manage the design, specification, and execution of new plant projects, as well as the upgrade and redesign of existing equipment, ensuring seamless integration and improved functionality. Develop and Execute Comprehensive Project Plans: Create detailed scopes of work, request and evaluate quotes, issue purchase orders, and coordinate internal and external project teams while maintaining strict adherence to budgets and timelines. Manage Contractor Relationships: Oversee external contractors performing new installations and electrical upgrades, ensuring quality and compliance with project requirements. Pursue Cutting-Edge Technologies: Identify and implement innovative solutions to enhance safety, product quality, plant profitability, and operational efficiency by reducing scrap, lowering maintenance costs, and more. Coordinate and Implement OEM Equipment: Collaborate with Original Equipment Manufacturers (OEMs) to integrate new equipment into plant operations effectively. Enhance Electrical Safety Practices: Partner with Corporate HSE to develop and implement best-in-class electrical safety practices across all Knauf Insulation North America facilities. Support Plant Rebuilds: Provide critical expertise and leadership during plant rebuilds, ensuring projects are completed efficiently and effectively. Train and Develop Team Members: Offer training and development support to plant Craftsmen, Operators, and Engineers, fostering a culture of continuous improvement and skill enhancement. Drives the highest levels of employee retention and engagement to ensure a sustainable workforce. Fosters a culture of innovation, collaboration, and accountability within the organization. Instill an environment of inclusion, where all employees feel that they can contribute and impact the company in a positive manner. Qualifications Education: Bachelor's Degree in Electrical Engineering or Electrical Engineering Technology Knowledge, Skills and Abilities: Strong leadership skills with a natural ability to take initiative and guide teams toward success. A willingness to learn and grow, with a proactive attitude toward acquiring new skills and knowledge. Highly adaptable and able to thrive in a fast-paced, ever-changing environment. Excellent communication and interpersonal skills, with the ability to persuade and influence others effectively. A collaborative mindset, capable of building strong relationships with team members, contractors, and stakeholders. Problem-solving skills with a creative and innovative approach to overcoming challenges. A passion for technology and a drive to implement solutions that improve safety, quality, and profitability. It is the policy of Knauf Insulation to provide equal employment opportunities to all qualified persons without regard to race, color, religion, sex (including pregnancy, childbirth, or related medical conditions), gender, sexual orientation, gender identity or expression, national origin, age, genetic information, disability, protected veteran status or any other protected characteristic prohibited by applicable law. Not ready to apply? Connect with us for general consideration.

Orchard Robotics is a Series A startup backed by top VCs like Quiet Capital, Shine Capital, and General Catalyst. We're securing America's food supply by building the AI farmer that automates our nation's farms. We've raised over $25M in pursuit of our mission to help farmers farm more profitably and sustainably than ever before. What We Do: We start by collecting the most valuable data for farmers, telling them everything about what is growing on their millions of trees, across thousands of acres of farmland. We do this using advanced camera systems we build, that take pictures of every one of the billions of fruit in a farm. This data lives in our cloud data platform, FruitScope, that we've developed from the ground up to help farmers manage their crops with precision. Farmers across the nation use our industry-leading software to look at their data, make critical decisions, and command farming operations on a daily basis. Our technology is used today across some of the largest farms in the nation. The Role: As a Forward Deployed Robotics Engineer at Orchard, you'll apply your cutting-edge robotics expertise at real-world farms. You'll deploy, develop, and implement our AI-powered camera systems in the fields. You'll spend about 50% of your time traveling to beautiful farms (apple orchards, vineyards, nut farms, strawberry farms, etc) across California, Washington, and occasionally other parts of the country. You'll work closely with our farmers, sales team, and engineers, rapidly solving problems and iterating on our technology in the fields. The remaining 50% of your time will be spent remotely, working with our core engineering team from home. You'll thrive if you enjoy technology and nature, are highly self-driven, and love engaging directly with customers. About the Role: Full-time, remote role with frequent travel (approximately 50% farm-based, 50% work-from-home). Frequent flying/driving/hotel stays near farms, typically involving scenic drives of 1-3 hours to customer fields (all travel expenses fully covered by the company). Many opportunities to directly influence product development. Perfect if you are a hardcore engineer who also loves nature. Comprehensive Health, Vision, and Dental coverage, and we cover 100% of the premium. Our team is close-knit & highly driven, you'll work directly with our CEO and entire team. We're deeply motivated by the impact we're making - every line of code written or new system built means less food that goes to waste, and more people who are fed. What You'll Do: Deploy, debug, and develop the next generation(s) of our advanced, tractor-mounted camera systems at customer sites, ensuring they perform exceptionally in diverse farm environments. Work closely with our farmers to deeply understand their operational needs, gather insights, and translate their feedback into real improvements. Partner with our sales team during customer demonstrations to showcase Orchard's technology to new farmers. Innovate and prototype creative solutions to unique problems encountered in the field, leveraging your robotics and engineering expertise. Be a generalist, supporting different parts of our software and hardware stack if needed. What Makes You a Good Fit: 1-3 years of relevant experience in industry or academia. Strong technical skills in robotics (Python, C++, embedded hardware, computer vision, localization, sensor fusion, or robotics hardware). You don't mind frequent travel, spending time out in the fields, and love the outdoors. Self-motivated, able to solve problems independently and thrive in unstructured environments. Excellent interpersonal skills and genuine excitement about engaging with customers. Must not have allergies to common agricultural products (nuts, apples, grapes, strawberries, blueberries) Bonus Points: Experience optimizing robotics algorithms for embedded platforms (e.g., NVIDIA Jetson). Familiarity with agriculture or outdoor equipment. Previous startup, outdoor adventure, or field deployment experience. If you're looking to help make a positive impact in the world by building the future of farming, come join us!

Descripción Puesto en Samtec, Inc Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. Summary/Objective: The Controls Engineer is responsible for the design, implementation, and support of control systems for advanced manufacturing equipment. This includes oversight of all controls-related aspects of automation projects-from initial scoping to detailed electrical design, software development, commissioning, and long-term support. The Controls Engineer is expected to deliver well-engineered, standards-compliant control systems that are reliable, sustainable, and scalable.Essential Functions/ Responsibilities: Lead the development of controls systems for automated equipment. Own all phases of controls development on assigned projects: from functional requirements and architecture through programming, power-up, and commissioning. Collaborate with mechanical and process engineering teams to define and document control system functional requirements. Specify electrical, pneumatic, thermal, and motion control components based on system requirements (e.g. controllers, motors, drives, heaters, sensors, actuators). Oversee creation and revision of electrical schematics. Control systems software design and development including programming PLCs, HMI/SCADA platforms, Motion Controllers, and servo drives. Execute system startup, debug, tuning, and machine qualification for new or upgraded automation systems. Provide troubleshooting and support for existing production machinery and control systems. Manage technical resources and coordinate timelines for controls-related project activities. Implement control system software changes to support upgrades, process improvements, or safety initiatives. Contribute to the creation and maintenance of software templates and standards for control system functionality, structure, and documentation. Ensure systems are designed with safety, sustainability, and long-term performance in mind, in compliance with standards such as NFPA 79, UL508A, and ISO 13849-1. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience: 5 years of direct experience as a controls engineer working on automated processes, equipment, and system integration in a manufacturing environment. Operational knowledge of servo motors, stepper motors, motion controllers, temperature controllers, pneumatic controls, control relays, sensors, operator interfaces, etc. Motion Controller programming experience. Operator Interface programming experience (Ignition and/or Red Lion preferred). PLC programming experience (IEC-61331-3 languages preferred). Knowledge of PID loop control and tuning. Experience reading and developing electrical schematics for internal and external builds. Experience with common industrial, IoT, and motion bus protocols (e.g. Modbus, MQTT/OPC-UA, EtherCAT/EthernetIP, etc.). Understanding of engineering documentation such as setup and adjustment procedures, calibration, software documentation, operating instructions, and maintenance procedures. Familiarity with machine safety applications, electrical power distribution, and control panel design. Understanding of Safety standards such as ANSI B11, ISO 13849-1, or IEC 62061. Familiarity with other relevant industry standards such as NEMA, NFPA 79, UL508A, etc. Resource management for project execution. Familiarity with software development tools, scripting languages, or database systems (e.g., Java, Python, .NET, SQL, web applications) is a plus-particularly where integration with enterprise systems or IT/OT convergence is involved. Proficient with written and verbal technical communication including generating reports and conducting group presentations. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Education: B.S. in Electrical Engineering, Software Engineering, or equivalent.

Substation Engineer - Protection & Controls 100% Remote | Direct Opportunity with ExecuPOWER ExecuPOWER is growing and we are looking for a talented Substation Engineer - Protection & Controls to join our team. In this role, you'll be a key technical contributor, working closely with project engineers, designers, and clients to deliver industry-leading substation projects. This is an exciting opportunity for someone who thrives in a fast-paced environment, takes pride in quality, and wants to be part of a company where curiosity and innovation are celebrated. What You'll Do Partner with P&C Designers/Drafters to develop protection & control drawings and documentation Collaborate with internal and external project teams across multiple disciplines Provide technical support for procurement and construction Engage with clients, building strong relationships and delivering on project needs Develop key deliverables such as: One-line & three-line diagrams Control, alarm, and communication schematics Panel front views, wiring diagrams, and control house layouts Equipment and P&C specifications Bills of material, I/O mapping, relay settings, and design calculations Perform engineering calculations including: DC battery & charger sizing AC/DC system analysis & station service sizing Overcurrent protection, voltage drop, CT/VT sizing Short-circuit & arc flash analysis (preferred) What You Bring Bachelor of Science in Electrical Engineering 5+ years of substation engineering experience (more experience welcome) Strong foundation in protection & control design and analysis PE license not required, but pursuing licensure is a plus Excellent attention to detail, problem-solving skills, and client focus Willingness to travel occasionally for client site visits Why Join ExecuPOWER?We are a certified women-owned engineering consulting firm built on partnerships, principles, and passion. Our mission is to deliver premium engineering services to the power industry-safely, efficiently, and with the highest quality. At ExecuPOWER, your growth and well-being matter. Our Benefits Include: Paid Holidays, PTO & Parental Leave 401K Plan + Match Medical, Dental, Vision & Prescription Plans HSA Contributions & Daycare FSA Short & Long-Term Disability, Life Insurance, Supplemental Coverage Tuition Assistance & Professional Certifications Flexible Work Schedules Pet Insurance (because furry family counts, too!) Professional development, advancement, and client exposure from day one This is more than a job-it's a chance to grow your career, sharpen your expertise, and help power the future.Apply now to join a team that exceeds client expectations every day. #SubstationEngineering #ProtectionAndControls #PowerIndustry #EngineeringJobs #ExecuPOWER

at Samtec, Inc Founded in 1976, Samtec is a privately held, $1 Billion global manufacturer of a broad line of electronic interconnect solutions, including High-Speed Board-to-Board, High-Speed Cables, Mid-Board and Panel Optics, Precision RF, Flexible Stacking, and Micro/Rugged components and cables. Samtec Technology Centers are dedicated to developing and advancing technologies, strategies and products to optimize both the performance and cost of a system from the bare die to an interface 100 meters away, and all interconnect points in between. With 40+ international locations and products sold in more than 125 different countries, Samtec's global presence enables its unmatched customer service. Summary/Objective: The Controls Engineer is responsible for the design, implementation, and support of control systems for advanced manufacturing equipment. This includes oversight of all controls-related aspects of automation projects-from initial scoping to detailed electrical design, software development, commissioning, and long-term support. The Controls Engineer is expected to deliver well-engineered, standards-compliant control systems that are reliable, sustainable, and scalable.Essential Functions/ Responsibilities: Lead the development of controls systems for automated equipment. Own all phases of controls development on assigned projects: from functional requirements and architecture through programming, power-up, and commissioning. Collaborate with mechanical and process engineering teams to define and document control system functional requirements. Specify electrical, pneumatic, thermal, and motion control components based on system requirements (e.g. controllers, motors, drives, heaters, sensors, actuators). Oversee creation and revision of electrical schematics. Control systems software design and development including programming PLCs, HMI/SCADA platforms, Motion Controllers, and servo drives. Execute system startup, debug, tuning, and machine qualification for new or upgraded automation systems. Provide troubleshooting and support for existing production machinery and control systems. Manage technical resources and coordinate timelines for controls-related project activities. Implement control system software changes to support upgrades, process improvements, or safety initiatives. Contribute to the creation and maintenance of software templates and standards for control system functionality, structure, and documentation. Ensure systems are designed with safety, sustainability, and long-term performance in mind, in compliance with standards such as NFPA 79, UL508A, and ISO 13849-1. “The responsibilities as defined are intended to serve as a general guideline for this position. Associates may be asked to perform additional tasks depending on strengths and capabilities” Required Experience: 5 years of direct experience as a controls engineer working on automated processes, equipment, and system integration in a manufacturing environment. Operational knowledge of servo motors, stepper motors, motion controllers, temperature controllers, pneumatic controls, control relays, sensors, operator interfaces, etc. Motion Controller programming experience. Operator Interface programming experience (Ignition and/or Red Lion preferred). PLC programming experience (IEC-61331-3 languages preferred). Knowledge of PID loop control and tuning. Experience reading and developing electrical schematics for internal and external builds. Experience with common industrial, IoT, and motion bus protocols (e.g. Modbus, MQTT/OPC-UA, EtherCAT/EthernetIP, etc.). Understanding of engineering documentation such as setup and adjustment procedures, calibration, software documentation, operating instructions, and maintenance procedures. Familiarity with machine safety applications, electrical power distribution, and control panel design. Understanding of Safety standards such as ANSI B11, ISO 13849-1, or IEC 62061. Familiarity with other relevant industry standards such as NEMA, NFPA 79, UL508A, etc. Resource management for project execution. Familiarity with software development tools, scripting languages, or database systems (e.g., Java, Python, .NET, SQL, web applications) is a plus-particularly where integration with enterprise systems or IT/OT convergence is involved. Proficient with written and verbal technical communication including generating reports and conducting group presentations. Must be able to sit/stand for at least 90 consecutive minutes, and not suffer from any sensory deprivation and/or paralysis of the limbs. Education: B.S. in Electrical Engineering, Software Engineering, or equivalent. SAMTEC, Inc. is an Equal Opportunity Employer and committed to creating a diverse environment. All employment decisions at Samtec are based in business needs, job requirements and individual qualifications, without regard to race, color, religion or belief, national, social or ethnic origin, pregnancy or parental status, age, disability, sexual orientation, gender and/or gender identity/expression, marital status, past or present military service, family medical history or genetic information, or any other status protected by applicable laws. Privacy Policy: *****************************************************

Join ENERCON as an Electrical Engineer! Our Federal Services Group is seeking a Principal Electrical Engineer to join the team. Our team supports our federal clients to solve a wide range of critical engineering problems. Our work covers both nuclear and non-nuclear facilities as well as facility-related infrastructure. Services range from full-scale design of new or replacement facilities to life cycle management to maximize their useful life and availability to assisting with the decommissioning of facilities that have reached the end of their useful life. If you have 3 years of experience and a Bachelor's Degree in Electrical Engineering, we encourage you to read more about this exciting opportunity. Responsibilities As an Electrical Engineer, you'll drive innovation, lead cross-disciplinary collaboration, and guide projects from design to successful field execution. With a focus on excellence and teamwork, you'll solve complex challenges and inspire your team to achieve outstanding results. Collaboration & Coordination: Interface with various engineering disciplines and understand project roles Design & Estimating: Prepare design studies, scopes, and engineering estimates Procurement & Specifications: Develop equipment procurement specs, evaluate bids, and select equipment Technical Expertise: Perform electrical calculations and solve complex technical problems Field Engagement: Travel for walkdowns, field installations, and start-up Leadership & Motivation: Lead teams with a positive attitude to achieve project goals aligned with ENERCON's excellence standards #LI-SH7 Qualifications Bachelor's Degree in Electrical Engineering from an accredited university Professional Engineering License Minimum 10 years of experience with design of electrical systems including, but not limited to: Preparing engineering calculations/analyses, design drawings and engineering reports Applying electrical engineering expertise to the design and qualification of structures, systems, and components Producing procurement specifications and construction specifications (electrical sections) Attending project meetings and perform field walkdowns Mentoring junior engineers Experience working on DOE federal projects Good writing, presentation and communication skills Ability to be an individual contributor and work effectively in teams Proficient in Word and Excel Must be a U.S. Citizen Pay Range USD $145,000.00 - USD $180,000.00 /Yr. Additional Information About ENERCON: At Enercon Services, Inc. (ENERCON), we're driven by our people-and we're proud to offer rewarding careers in a culture of excellence. We provide a comprehensive benefits package and professional development opportunities that support your long-term growth. What We Offer: Enjoy full benefits for you and your dependents starting day one, no waiting period Flexible work arrangements, including hybrid and alternative schedules 401(k) with employer matching Tuition reimbursement Professional Engineer (PE) license support and incentives Want to see the full picture? Click HERE to see our Comprehensive Benefits Salary Range Information: If a salary range is listed, it reflects the typical range for this full-time position based on the role, level, and location. Individual compensation within the range will be determined by factors such as work location, relevant experience, job-related skills, and education or training. Eligibility to Work: Candidates must be legally eligible to work in the US without requiring current or future sponsorship. Ability to pass a pre-employment and random drug and alcohol screenings, ENERCON and client specific background checks, and annual motor vehicle record (MVR) according to company and client policies. Equal Opportunity Employer: ENERCON does not discriminate in employment opportunities or practices based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, veteran status, or any other characteristic protected by law. Connect with Us: *************** | LinkedIn

A Controls Engineer/Specialist will provide essential technical support to both internal and external service teams, ensuring the reliable performance of automation systems in high-volume, fast-paced distribution and fulfillment environments. This support will be delivered both remotely and on-site as needed, with a focus on minimizing downtime and maintaining operational efficiency. Responsibilities Participate in rotating 24/7 on-call support schedule to provide rapid response and ensure continuous system uptime across all operations. Troubleshoot and resolve complex control system issues involving PLCs, drives, robotics, and vision systems. Prepare, review, and organize all controls engineering turnover documentation to ensure accuracy, completeness, and proper storage. Qualifications Minimum Requirements: Proficient in Allen-Bradley control platforms, with expertise in PLC Programming and troubleshooting Hands-on experience with variable frequency drives (VFDs) Solid working knowledge of SCADA and HMI systems Minimum 2 years of experience in controls engineering or a related automation field Education: Associate's degree in electrical engineering or 2 years' experience in related field Preferred Qualifications: Bachelor's degree in electrical engineering or 5 years' experience in controls engineering, MHE, and systems Skills & Knowledge: Proficient in AutoCAD electrical Strong electrical diagnostics and troubleshooting skills in industrial and automation environments Experience with SCADA systems, variable frequency drives, and ladder logic Solid understanding of safety and compliance standards, including OSHA regulations and NFPA 70E Proficient in Microsoft Office Suite (word, excel, outlook) Excellent written and verbal communication skills

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. ABOUT THE ROLE You will be a member of our multi-disciplinary team and will perform as a high level specialist in a lead role for the electrical engineering team. Projects may include new construction and renovation in educational, healthcare, sports, corporate commercial and science and technology. HERE'S WHAT YOU'LL DO Perform electrical engineering systems design for building construction. Initiate project designs and help to develop design goals and systems. Oversee, guide, mentor and provide technical leadership to designers and engineering team. Participate or lead project teamwork planning sessions. May serve as project manager or project engineering leader and lead engineering meetings. Assume project engineering responsibilities and adhere to financial and work goals. Design lighting, power distribution, signaling, communications and/or telecommunication systems for healthcare, education/higher education and commercial clients per applicable codes. Prepare construction documents including drawings and specifications. Guide less experienced team members in execution of drawings. Specify electrical equipment. Serves in QAQC process and as an independent reviewer. Complete quality control checks of engineering documents. Work with the Project Manager to establish and maintain realistic work and labor plans and deliverable schedules that contribute to the project's bottom line financial success and satisfy the project's contractual obligations. Participate or lead value engineering sessions with Architectural/Engineering team. Interface effectively with clients and members of the design team. Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts. Review and markup of shop drawings and submittals. Respond to RFI's and review of change orders in the preparation of construction documents. Responsible for projects' construction administration. Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site. Applies knowledge of electrical and building codes in building systems design. May perform other related tasks as needed. HERE'S WHAT YOU'LL NEED Minimum of 10 years of related experience required. Current PE in Electrical Engineering in the United States required. LEED accreditation preferred. Advanced knowledge of electrical engineering. Ability to serve in QAQC process and as an independent reviewer. Excellent verbal and written communication skills. Strong ability to interface effectively with clients and members of the design team. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required. The salary range for this position to be filled in the Buffalo, NY office is $121,170 to $151,410 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct.

TSC is seeking a remote based Guidance, Navigation, Controls (GNC) Engineer that will design, integrate, test, and deliver flight control systems or mission-critical onboard software for unmanned aerial systems (UAS). The ideal candidate will have experience in UAS Guidance, Navigation, & Control (GNC) utilizing inertial navigation, vision, collision avoidance, commercial autopilots, redundancy management and path planning architecture. The GNC Engineer will participate hands-on in the full software life cycle, from concept through implementation, integration to flight test and operational release. This will be a remote based position with up to 25% travel required. As a GNC Engineer you can anticipate some of your day-to-day responsibilities to include: Work on a team to develop, modify and tune guidance and control systems for fixed wing aircraft Work on a team to develop, modify and tune navigation systems based on sensor fusion of 6-DOF IMU, magnetometer, GNSS, pressure and ranging sensors. Work on a team to develop and modify 6-DOF and Hardware-in-the-Loop simulation environments Simulation, analysis, control, and testing on 6 degree-of-freedom (6-DOF) motion platform for development and validation of autonomous UAS. Work on a team to design and develop flight or mission-critical onboard software for unmanned systems Aid development for unmanned aerospace includes guidance, navigation & control, mission sequencing, payload control, redundancy and contingency management, uplink and downlink packet encoding and decoding, converting between different serial protocols, hardware-in-the-loop simulation, ground-based GUIs, and aircraft subsystem control (i.e., payload, electrical systems) Embedded Software development (C/C++, Python, shell scripts) Writing/modifying software to adjust flight behaviors: Use development tools such as: JIRA, git, C/C++, CMake, Linux, MATLAB Collaborate with a multi-disciplinary software team on large, multi-language projects Participating in code reviews, Flight Testing, and Customer Presentations Bench test, Hardware-in-the-loop, and field testing of UAS platforms Local, interstate, and international travel to support field testing and customer demonstrations. Expected travel is ~10-25%. Collaborate with other engineering disciplines (Systems, Software, Mechanical, Electrical) in planning, design and development of systems to ensure software and hardware performance and compatibility Design software architecture, interfaces, and gateways for communication with external Autonomy software services. Implement functionality using a model-based approach. Software verification and validation including writing Test Cases and Test Procedures Develop, implement, and document data and software application test plans to validate project deliverables meet quality standards Oversee and support processes and procedures for existing data and reporting activities to support internal and external customer deliverables. Examples of specific deliverables include but are not limited to: recurring reports and analyses; data validation and documentation Interface and derive solutions in coordination with hardware design teams Required Qualifications BS degree in Mechanical, Electrical, Computer, Aerospace, Controls engineering or other relevant discipline, plus at minimum ten years of experience in a professional environment developing MATLAB / Simulink control systems with auto code experience; or MS in Controls or Aerospace Engineering plus 2 years' experience. Embedded code experience preferred. US Citizenship and the ability to obtain and maintain a DoD Security Clearance Experience in developing physics based 6 DOF simulations, motion platforms. Experience developing with: Gazebo or similar simulation tools, MatlabMATLAB/Simulink, C, C++, Python Experience developing scripts to run batch processes Experience in data post processing from simulation or flight testing, report summary writing Experience developing guidance and autonomy algorithms required; in denied environments preferred Preferred Experience Minimum two years of demonstrated, hands-on professional experience in at least one (ideally a combination) of the following areas: Model-based design and/or test using the Simulink/Stateflow tool chain. Software development in a relevant subject matter area: Aircraft Guidance Navigation & Control or other robotic system guidance, navigation and control; ground- or airborne mission systems; general aerospace flight control or cockpit avionics systems; ground stations; payload control. Development/operations of hardware-in-the-loop simulators, conducting testing and troubleshooting of HW/SW interfaces. Familiarity with software configuration management tools, version control systems, defect tracking tools, and peer review required. TSC Benefits: TSC offers a stable work environment, a competitive salary, and a comprehensive benefit package; including ESOP participation, 401k Plan, Flexible Work Schedules, Tuition Reimbursement, Co-Sponsored Health Plan, Paid Leave and much more. Applying to TSC: Only those candidates invited for an interview will be contacted. Employment at TSC is contingent upon the successful completion of a comprehensive background check, security investigation, and a drug screening. This contractor and subcontractor shall abide by the requirements of 41 CFR 60-1.4(a), 60-300.5(a) and 60-741.5(a). These regulations prohibit discrimination against qualified individuals based on their status as protected veterans or individuals with disabilities, and prohibit discrimination against all individuals based on their race, color, religion, sex, sexual orientation, gender identity, national origin, or for inquiring about, discussing, or disclosing information about compensation. Moreover, these regulations require that covered prime contractors and subcontractors take affirmative action to employ and advance in employment individuals without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran.

Remote \- USA ShortList has partnered with a pioneering automotive company to augment their high\-performance autonomous vehicle capabilities. This company operates in high profile motorsport and the role requires global travel to world class testing facilities, as well as being part of a demanding racing programme. This role is not for the faint hearted \- it needs an individual who thrives in an elite, pressurized, and focussed environment where there is constant pressure to innovate. The rewards for the right individual is to be part of a high\-performance motorsport team who are working at the cutting edge of autonomous vehicle tech. This role requires: Strong LiDAR SLAM skills \- overseeing the design and development of real\-time SLAM algorithms in GPS\-degraded settings Experienced in Sensor Fusion \- Integrating multiple sensor capabilities Evidence of field testing experience in a wide range of environments and locations. Ideally a Masters or PhD in a related Robotics field Extensive experience in vehicle localization technologies This Robotics Engineer is fully remote, but will require approximately 30% of the time on global travel according to the testing\/racing programme. I can also only consider US Citizen, Green Card holders. Please note that this is a unique role for an ambitious individual who wants to be part of an amazing team. Click apply now to be considered for the Robotics Engineer role. Please note, the travel and right to work eligibility requirements are non\-negotiable. "}}],"is Mobile":false,"iframe":"true","job Type":"Permanent","apply Name":"Apply Now","zsoid":"23870187","FontFamily":"Arial, Helvetica, sans\-serif","job OtherDetails":[{"field Label":"Job Opening ID","uitype":111,"value":"4670"},{"field Label":"Industry","uitype":2,"value":"Government\/Military"},{"field Label":"Salary","uitype":1,"value":"$115,000"},{"field Label":"City","uitype":1,"value":"Richmond"},{"field Label":"Province","uitype":1,"value":"Virginia"},{"field Label":"Postal Code","uitype":1,"value":"23173"}],"header Name":"Robotics Engineer","widget Id":"20**********041065","awli IntegId":"urn:li:organization:2870452","is JobBoard":"false","user Id":"20**********036383","attach Arr":[],"awli ApiKey":"77m08ikqop73yc","custom Template":"3","awli HashKey":"5a8d11c14b02e13a3ba9490317925bb870b7b5eb519490fc4ece1de5c3dd9bb7545685dcc097739d140c65bf981582a6f**********2461c2c52e6517d0eb2ca","is CandidateLoginEnabled":true,"job Id":"20**********880295","FontSize":"12","location":"Richmond","embedsource":"CareerSite","indeed CallBackUrl":"https:\/\/recruit.zoho.com\/recruit\/JBApplyAuth.do"}

This position is posted by Jobgether on behalf of a partner company. We are currently looking for a System Control Engineer in the United States. As a System Control Engineer, you will serve as the technical expert for control systems within an advanced AV platform environment. You'll support complex installations, manage escalated cases, and provide guidance on best practices in control methodologies. Your work will involve scripting, troubleshooting, and collaborating closely with software developers to improve reliability and performance. Acting as a trusted advisor to both internal teams and external clients, you'll ensure every solution meets the highest technical standards while contributing to the continuous innovation of next-generation AV control systems. Accountabilities: Act as a subject matter expert in system control, providing advanced troubleshooting, optimization, and support for Lua scripting and control elements. Deliver remote and on-site technical assistance to clients, integrators, and internal teams, ensuring high-quality system performance and reliability. Report and track field software bugs, collaborate with developers via Jira, and help prioritize improvements that enhance customer experience. Maintain detailed documentation within CRM systems and knowledge bases to ensure transparency and efficiency in case management. Provide updates on project progress to internal stakeholders and customers, ensuring alignment and timely resolution of technical challenges. Support quality assurance processes for control-related products and maintain close coordination with software teams on product enhancements. Requirements Bachelor's or advanced degree in Computer Science, Electrical Engineering, or a related discipline. 5+ years of experience in the audiovisual or IT industry, with at least 3 years in scripting or programming (Lua preferred). Advanced certifications in Crestron, Extron, or AMX programming required; CTS or CTS-D certification is a plus. Strong background in troubleshooting Q-SYS or similar Linux-based AV systems. Experience using collaborative tools like Jira and Confluence for issue tracking and documentation. Knowledge of control protocols including contact/relay logic, serial data, and Ethernet control. Familiarity with networking, AEC, VoIP, and telephony systems. Excellent communication and problem-solving skills, with the ability to work independently or as part of a team. Benefits Competitive salary range between $66,500 and $119,000, depending on experience and location. Comprehensive healthcare, dental, and vision coverage. 401(k) retirement plan with company match. Performance-based incentives and commission opportunities. Professional development programs and ongoing technical training. Inclusive and diverse workplace culture that values innovation and collaboration. Jobgether is a Talent Matching Platform that partners with companies worldwide to efficiently connect top talent with the right opportunities through AI-driven job matching. When you apply, your profile goes through our AI-powered screening process designed to identify top talent efficiently and fairly. 🔍 Our AI evaluates your CV and LinkedIn profile thoroughly, analyzing your skills, experience, and achievements. 📊 It compares your profile to the job's core requirements and past success factors to determine your match score. 🎯 Based on this analysis, we automatically shortlist the 3 candidates with the highest match to the role. 🧠 When necessary, our human team may perform an additional manual review to ensure no strong profile is missed. The process is transparent, skills-based, and free of bias - focusing solely on your fit for the role. Once the shortlist is completed, we share it directly with the company that owns the job opening. The final decision and next steps (such as interviews or additional assessments) are then made by their internal hiring team. Thank you for your interest! #LI-CL1

If you think your skills, experience and aspirations make you a good match for this position, we encourage you to apply. ABOUT THE ROLE You will be a member of our multi-disciplinary team and will work under the direction of a senior engineer. Projects may include new construction and renovation in educational, healthcare, corporate commercial and science and technology. HERE'S WHAT YOU'LL DO Perform electrical engineering systems design for building construction. Initiate project designs and help to develop design goals and systems. Participate or lead project teamwork planning sessions. May serve as project manager or project engineering leader and lead engineering meetings. Assume project engineering responsibilities and adhere to financial and work goals. Design lighting, power distribution, signaling, communications and/or telecommunication systems for healthcare, education/higher education and commercial clients per applicable codes. Prepare construction documents including drawings and specifications. Guide less experienced team members in execution of drawings. Specify electrical equipment. Complete quality control checks of engineering documents. Participate or lead value engineering sessions with Architectural/Engineering team. Recommend improvements with reference standards and processes to improve quality, coordination, and to streamline production efforts. Review and markup of shop drawings and submittals. Respond to RFI's and review of change orders in the preparation of construction documents. Conduct job site visits to verify existing conditions and observe construction progress. Attend and participate in construction meetings. Site visits frequently require a physical walk-through of site. May perform other related tasks as needed. HERE'S WHAT YOU'LL NEED Minimum of 8 years of related experience required. Current PE in Electrical Engineering in the United States required. LEED accreditation preferred. Strong knowledge of Life Safety Codes Ability to work independently in all electrical disciplines with no oversight or guidance. Excellent verbal and written communication skills. Must be a critical thinker. Must be highly analytical. Must have the ability to engage effectively with clients. Must be a fully qualified professional able to perform work with a high degree of latitude, with some ambiguity in work. Able to effectively handle multiple projects. Experience in computer applications for engineering design programs (i.e. Revit, AGI32, Visual, SKM Power Tools) required. The salary range for this position is $101,010 to $126,315 annually. This salary range is the range we believe is the anticipated range of possible base compensation at the timing of the posting. We may ultimately pay more or less than the anticipated salary range for the position. Employees may be eligible for discretionary bonuses. We offer a full benefit package including medical, dental and vision coverage and flexible spending account options and voluntary insurances. We have paid time off, flex-time schedules, remote work options and a 401k plan and employee perk programs. For a general overview of our benefits, please visit our careers page at ********************************************** Actual compensation may vary from posting based on geographic location, work experience, education and/or skill level. ABOUT OUR FIRM CannonDesign is a design practice where strategy, experience, architecture, engineering, and social impact converge. We don't just dream up solutions - we create and bring them to life in ways to solve some of the biggest challenges facing our clients and the society. At the heart of everything we do is Living-Centered Design, a bold commitment to using our talents to not just improve the world but to truly reshape it for the better. It's more than a philosophy - it's who we are, and it drives us to make a meaningful, lasting difference every day. ABOUT WORKING HERE We are relentless in our pursuit of client adoration (not simply satisfaction). Consistent delivery of the best service is what we are about. We are committed to ensuring our practice provides equal opportunities for all employees, as we strive to connect with communities around us and focus on the future of design. We support equity, diversity, and inclusion efforts that benefit all employees through the leadership of our DEI Council, our Employee Resource Groups which are open to everyone, and other community initiatives. We're about communication and transparency here. If you want to talk to someone about an idea you have, or a challenge that needs addressing, we're ready for you. Please note that candidates can only apply to our positions on our company Careers site. It's not uncommon for scammers to create positions that look legitimate on other sites; never enter your information or apply for CannonDesign positions on any platform. Should an issue arise that you feel we should be aware of, please contact us. Please provide your resume and portfolio when applying. As a condition of employment, all employees are expected to complete mandatory training, including compliance training, within required timeframes and adhere to our internal policies and our Code of Conduct. CannonDesign is an Equal Opportunity Employer. CannonDesign is committed to maintaining a work environment that is free from any and all forms of unlawful discrimination and harassment. It is therefore the firm's policy to prohibit discrimination and harassment against any applicant, CannonDesign employee, vendor, contractor, or client on the basis of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, pregnancy, veteran status, genetic information, citizenship status, or any other basis prohibited by applicable law. It is also CannonDesign's policy to prohibit any and all forms of retaliation against any individual who has complained of harassing or discriminatory conduct, or participated in a firm or agency investigation into such complaints.

14164 - Power Systems Controls Engineer (remote, up to 25% travel) - Juno Beach, FL Estimated Duration: 12 months with possible extensions Work Setting: Remote with frequent trips to Juno Beach Fl. travel up to 25% for project commissioning support Required: • Experience in PLC programming, preferably Schneider Electric platforms (11+ years) • Experience with Modbus, DNP3, and industrial communication protocols • Experience with Ignition SCADA platform and HMI development • Experience with power systems and utility-scale energy project • Experience in utility-scale renewable energy or power generation projects • Experience with BESS control systems, inverters, and energy storage technologies • Experience with grid interconnection requirements and utility standards • Experience with FAT/SAT testing procedures and commissioning protocols • Experience with PPA, LGIA, and OEM testing completion • Bachelor's degree in electrical engineering, Computer Engineering, or related field. Preferred: • Experience with NERC CIP cybersecurity Responsibilities include but are not limited to the following: • Develop and maintain PLC programs with a focus on Schneider Electric platforms • Implement and troubleshoot industrial communication protocols including Modbus and DNP3 • Design, configure, and deploy HMI applications using the Ignition SCADA platform • Support utility-scale power systems and renewable energy projects through control system integration • Engineer and commission BESS control systems, inverters, and energy storage technologies • Ensure compliance with grid interconnection requirements and utility standards • Execute FAT/SAT testing, commissioning protocols, and support PPA, LGIA, and OEM testing completion Why apply? • Gain experience with one of the world's largest solar and wind energy providers, which last year briefly became the most valued U.S. energy company; • Work with a great team of professionals and learn the newest technologies and approaches; • Enjoy our Client's wonderful campus with top-notch facilities for work and recreation; • Benefit from multiple project extensions; • Receive support and advice from Vitaver consultants who are already working at our Client's site; • Get extra cash by participating in the Vitaver Successful Completion Bonus Program; • Always get paid in full and on time

OPPORTUNITY For a talented engineer with experience designing electrical systems for large industrial and commercial facilities. Join an integrated team of architects, engineers and project managers and engage in challenging projects up to $500 million for many of the biggest brands in the industry. This key role will execute a broad set of engineering competencies, technical design knowledge, consultation and problem-solving skills as well as provide mentorship to others in an environment that values collaboration. POSITION Reports to the SVP/Director of Engineering. Leads engineering and design teams to prepare drawings and specifications for lighting and lighting control systems, low and medium voltage power distribution systems, specification of basic material and methods, and development of control systems for mechanical and refrigeration systems. This position will proactively work across multi-discipline design teams. QUALIFICATIONS BSEE, BSEET, BSAE or related degree; PE required 10+ years of experience designing electrical systems for large industrial and commercial facilities, preferably within the A/E consulting industry Independently creates construction documents Excellent interpersonal skills, work ethic and demonstrated leadership capabilities COMPANY Located at the base of historic Mt. Adams, Hixson Architecture, Engineering, Interiors was formed in 1948 and is consistently listed as one of the top A/E firms in the United States. Fostering a culture that is different by design, Hixson manages by values, not by business objectives, and believes that by taking care of its associates, success follows. Add to this a prioritization of professional development, community service and living a balanced life, it all makes for a great place to work. To learn more about life at Hixson, please visit ******************* COMPENSATION Commensurate with experience, plus excellent benefits package: comprehensive health plan with $0 monthly premium, life insurance, paid time off, paid parental leave, 401K match, profit sharing, end-of-year bonus plan, remote work flexibility, tuition reimbursement, on-site fitness center, free parking and more.

**Country:** United States of America , Remote City, MI, 49503 USA ** Remote **U.S. Citizen, U.S. Person, or Immigration Status Requirements:** U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract. **Security Clearance:** None/Not Required Pratt & Whitney is working to once again transform the future of flight-designing, building and servicing engines unlike any the world has ever seen. And because transformation begins from within, we're seeking the people to drive it. So, calling all curious. Come ready to explore and you'll find a place where your talent takes flight-beyond the borders of title, a country or your comfort zone. Bring your passion and commitment and we'll welcome you into a tight-knit team that takes our mission personally. Channel your drive to make a difference into shaping an organization and an industry that's evolving fast to the future. At Pratt & Whitney, the difference you make is on display every day. Just look up. Are you ready to go beyond? **What You Will Do:** The positions primary focus is the creation and validation of a centrally operational technology, robotics specification for all of Pratt and Whitney to utilize. After creation, this role will be to ensure compliance with all Pratt and Whitney sites as well as machine and system suppliers. The position will also create and implement standard deliverables and buy off procedures generated as part of the robot specifications and in alignment with all company and project automation goals. Primary Job Responsibilities: + Create and assist the implementation of standards as related to robotics. This includes: + Robot I/O bitmap for PLC and peripheral devices + Robot program structure templates + FANUC DCS requirements and validation procedures + General programming requirements + Application error code assignment + Standard engineering procedures and documentation + Standard best practices, integration procedures and documentation + Maintenance procedures and Life Cycle Cost calculations + Develop and assist the implementation of custom software. This includes: + Standardized program macros + Fault handling and recovery by process + Data security rules implementation + Data collection and user interfaces + Standard data collection templates that can be easily replicated + Data/communication driver creation and maintenance + Robotics simulation development and standardization + Work in coordination with team members to create digital twin of automated processes + Virtual commissioning of digital twin in coordination with control engineers + Reach, range, and throughput validation + Develop deliverable offline programs + Applying expertise to technical problem resolution for current and future projects + Communicating at all levels within RTX and Pratt & Whitney, as well as externally, tapping technical resources, forming teams and consulting with programs. + Meeting all Environmental Health & Safety and Preventative Maintenance requirements associated with manufacturing development. + Assist as resource in the capital procurement process + Provide an expert level of understanding of robotic standards and execution to all levels of the organization. + Up to 50% travel required **Qualifications You Must Have:** + Bachelor's Degree with 5+ years of experience or equivalent demonstrated experience of 10+ years in automated robotic systems, specifically in manufacturing environments + US Citizen due to program requirements + The ability to obtain a US Government Secret Clearance + Excellent judgment and professional maturity **Qualifications We Prefer:** + Extensive experience in FANUC robot programming + Experience with FANUC Roboguide or Siemens Process Simulate simulation software + Strong communication, collaboration and team building skills; ability to connect with all levels of the organization + Candidate should be self-starter and able to work with minimal direction + Extensive experience troubleshooting different component manufactures and applications + General understanding of automated systems architecture and PLC programming **Learn More & Apply Now:** In addition to transforming the future of flight, we are also transforming how and where we work. We've introduced role types to help you understand how you will operate in our blended work environment. This role is: Remote: Employees who are working in Remote roles will work primarily offsite (from home). **_As part of our commitment to maintaining a secure hiring process, candidates may be asked to attend select steps of the interview process in-person at one of our office locations, regardless of whether the role is designated as on-site, hybrid or remote._** The salary range for this role is 101,000 USD - 203,000 USD. The salary range provided is a good faith estimate representative of all experience levels. RTX considers several factors when extending an offer, including but not limited to, the role, function and associated responsibilities, a candidate's work experience, location, education/training, and key skills. Hired applicants may be eligible for benefits, including but not limited to, medical, dental, vision, life insurance, short-term disability, long-term disability, 401(k) match, flexible spending accounts, flexible work schedules, employee assistance program, Employee Scholar Program, parental leave, paid time off, and holidays. Specific benefits are dependent upon the specific business unit as well as whether or not the position is covered by a collective-bargaining agreement. Hired applicants may be eligible for annual short-term and/or long-term incentive compensation programs depending on the level of the position and whether or not it is covered by a collective-bargaining agreement. Payments under these annual programs are not guaranteed and are dependent upon a variety of factors including, but not limited to, individual performance, business unit performance, and/or the company's performance. This role is a U.S.-based role. If the successful candidate resides in a U.S. territory, the appropriate pay structure and benefits will apply. RTX anticipates the application window closing approximately 40 days from the date the notice was posted. However, factors such as candidate flow and business necessity may require RTX to shorten or extend the application window. _RTX is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability or veteran status, or any other applicable state or federal protected class. RTX provides affirmative action in employment for qualified Individuals with a Disability and Protected Veterans in compliance with Section 503 of the Rehabilitation Act and the Vietnam Era Veterans' Readjustment Assistance Act._ **Privacy Policy and Terms:** Click on this link (******************************************************** to read the Policy and Terms Raytheon Technologies is An Equal Opportunity/Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status, age or any other federally protected class.