Barnes Group jobs in Maumee, OH - 28884 jobs

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Gainesville Employment Status: Hourly Full-Time Function: Supply Management/Purchasing Pay Range: ($33,639.00 - $50,458.00) Target Bonus: % Req ID: 27317 Summary Responsible for pulling, weighing, preparing and completing documentation for customer orders which are to be delivered by commercial trucker. Load/unload truck shipments. Warehouse received material and finished product in proper location. Support other departments to retrieve and replace inaccessible stock as needed. Key Deliverables Correctly pulled/boxed/prepared customer orders Work environment cleanliness, and organization No safety incidents or accidents Well maintained packaging and shipping supplies Key Accountability Metrics Satisfactory ISO and QC audits Monthly Customer Complaint Report Performance appraisals Key Responsibilities and Essential Functions 20% Pick and Pack Customer Orders Picks orders which are to be delivered by commercial trucker based on customer order and completes required documentation. Prepares pulled orders and places in holding area for truck pick up. 40% Load/Unload Shipments - Warehouse Material and Product Loads and unloads truck shipments received through Distribution. Follows proper procedure to handle deliveries in order to facilitate entry into Harris inventory system. Warehouses received materials and finished product in proper Manufacturing or Distribution areas, recording location on appropriate documentation. 20%Other Departments Support Aids other departments by pulling and replacing inaccessible stock using forklift. 5% Follow Safety Regulations Works safely and supports safety within their team across the organization - as required. Participates in safety training and demonstrates a high regard for safety at all times. Wears PPE as required by safety regulations. 5% Maintain Quality Maintains quality by verifying that pulled product, packaged or not, meets Deliveries requirements and work procedures. 5% Complete Documentation Completes the following forms/reports as required by department procedures: • Deliveries • Returned Goods Authorization • Daily 5S Check Sheet • Daily Forklift Inspection • Packaging/Shipping Supplies Checklist • Packing List on incoming shipments 5% Support Department and Company Initiatives Works on cost saving projects, Six Sigma projects, and provides support for other team members and projects. Attends team meetings. Utilizes lean tools and techniques such as 5S and visual factory concepts in maintaining order and cleanliness. Performs additional tasks to support production as needed or directed by supervisor or management. Education and/or Experience Required - 2 or more years of related work experience and High school diploma or GED or equivalent combination of education and experience. Preferred - Experience related to distribution; some computer knowledge; forklift license. Core Competencies Required from Employees Maintains a Customer Focus - Demonstrating exceptional service to both internal and external customers giving high priority to understanding and satisfying the customer. Takes Ownership - Demonstrates a continuous drive to achieve superior results and takes responsibility for those results. Is a Team Player - Has the ability to collaborate effectively with others to achieve common goals. Recognizes situations in which team members need to work together to solve work tasks at hand. Uses Sound Judgment / Integrity - Takes action that is well-reasoned, which represents the best interest of the business. Achieves Quality Results - Flawlessly executes on objectives to ensure the long- term success of the organization. Key Knowledge, Skills, Abilities, and Qualities Required Qualities and Skills Initiative, flexibility, responsibility and independence, ability to multi-task, goal-oriented, teamwork, excellent communication skills, ability to handle projects of varying scope, attention to detail, respectful of others, and willing to share expertise with others. Language Skills Ability to read and interpret documents such as safety rules, specific customer requirements, procedures. Ability to communicate effectively with coworkers Mathematical Skills Ability to work with basic mathematical concepts. Reasoning Ability Ability to define problems collects data, establish facts, and draw valid conclusions. Ability to interpret technical instructions. Physical Demands of Position - See Physical Demands Form Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801, Mentor Req ID: 27969 Description Looking for an exciting & rewarding career with a company that is a global leader in its industry? Look no further than Lincoln Electric, a global leader in welding, cutting, and automation that has been a staple in Northeast Ohio for over 126 years! As a Machine-Chemical Operator, you will help deliver world-class products to customers that have trusted the Lincoln Electric brand for decades. By ensuring the production and/or packaging of electrodes or other product components, you will help continue to drive a legacy of proven and trusted products that will help build the world's bridges, skyscrapers, energy pipelines, and more for decades to come. HERE'S A GLIMPSE OF WHAT YOU'LL BE DOING The Core Description - Perform general labor tasks for the production and packaging of products, including placing components or finished products in appropriate bins, mixers, presses or other machinery. Requires the completion of proper labeling and other paperwork related to production and performs quality checks on all assigned work. May perform occasional problem solving or troubleshooting. The Day-to-Day - Work collaboratively with computer-controlled equipment designed for extruding, wire drawing, winding, and packaging materials. Prepare chemical compounds or other components used in the production or assembly process. This may include set-up, operation, monitoring, maintenance, and/or cleaning of equipment. May require mechanical aptitude and spatial ability as well as continuous use of hands including grasping, pushing, and pulling. Following Best Practices - Strictly adheres to quality standards and frequently reads and follows written work instructions and production specifications (e.g., scales, dials or gauges, charts or tables). Understanding, following and enforcing all risk reduction procedures including wearing specified protective clothing and safety equipment where required. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Our Outside Sales Engineer is supporting our High Voltage Maintenance business. HVM is an electrical engineering and testing company providing comprehensive testing, maintenance, and engineering services to a variety of industries including utilities, data centers, renewable energy, commercial and industrial industries. This position will report to the Regional Sales Manager covering the Cleveland area and will provide sales and technical support for all the selling resources in that area. The Outside Sales Engineer is responsible for generating new business and maintaining relationships with existing key customers. RESPONSIBILITIES Make regular sales calls on existing accounts and establish relationships with new customers. Make effective customer presentations. Provide proposals or service contracts for HVM's services and repair work. Coordinate and schedule work with Service Center Manager and with customers. Promote sales through active participation in trade shows and professional societies. Work with Business Administrator to develop weekly invoicing and monthly status reports. EDUCATION AND CERTIFICATIONS Bachelor's Degree Engineering, Electrical or Mechanical Graduate of Electrical Technical School Military certification with at least 3 years of directly related work experience will be held as equivalent to the educational requirement. TRAVEL TIME REQUIRED Up to 75% within assigned Cleveland territory Company provided vehicle The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we're on a mission to empower the people that will power the future. From a simple swipe to life-changing medicines, from push notifications to generative AI. We design, manufacture, and service the products and solutions that keep the world connected. With $6.9 billion in revenue, a strong customer base and global reach spanning nearly 70 countries, we are uniquely positioned to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization now or in the future, are not eligible for hire. The anticipated salary range for this role in the Cleveland, OH locality is between $94,800 to $118,450 per year plus Sales Incentive Plan-salary ranges for other geographic localities may vary. Certain roles are eligible for additional rewards, including merit increases, annual bonus and stock. These awards are allocated based on individual performance and are role based. In addition, certain roles also have the opportunity to earn sales incentives based on revenue or utilization, depending on the terms of the plan and the employee's role. The role is eligible to participate in a comprehensive and competitive benefits program, including medical, dental, vision, disability, PTO, holiday pay, and 401k. Additional details about total compensation and benefits will be provided during the hiring process. #LI-HR1 #HVM

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Function: Engineering Pay Range: Min: 63,800 - Mid - 88,800 Bonus Plan:Profit SharingProfit Sharing % Req ID: 27257 What You Will Do As an Electrical Engineer, you will collaborate in a team environment to design and support industrial electrical systems, which includes various types of equipment new and old. Specific responsibilities include: Engineer solutions to improve equipment reliability, safety, ergonomics, and compliance with ISO 14001, ISO 450001, and other EHS initiatives. Provide technical support to Production, Maintenance, and IT departments, reducing downtime and improving system performance. Develop, design, and update PLC, VFD, and HMI programs using various control automation platforms, including Rockwell, Siemens, and Beijer. Update and maintain National Instruments LabVIEW code for testing applications and equipment. Interface with engineering, manufacturing, maintenance, IT, MES, and Production teams to support facility projects. Apply NEC knowledge for planning industrial equipment installations and work with electricians to update documentation. Supply project leaders with capital cost estimates and timelines, and review capital equipment quotations. Lead projects or project steps, solve complex problems, and act as a resource for colleagues with less experience. Manage outside engineering and construction personnel, ensuring all safety, health, environmental, and compliance aspects meet regulations. Integrate equipment into data collection systems and establish network topologies. Support network backup, device patching management, and control system asset inventory. Compile data from connected devices for organizational use and develop standards for control systems hardware and software. Identify and assume additional responsibilities for projects and processes that align with and drive towards Lincoln Electric Company's 2025 Higher Standard Goals. Education and Experience Requirements This position is posted as a range, candidates with varying levels of experience and qualifications are encouraged to apply. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Minimum requirements, Engineer II - Bachelor's degree in electrical engineering with 3+ years of professional relevant engineering experience. Experienced Professional - Has working knowledge and experience in own discipline Continues to build knowledge of the organization, processes and customers Performs a range of mainly straightforward assignments Uses prescribed guidelines or policies to analyze and resolve problems Receives a moderate level of guidance and direction Engineer III - bachelor's degree in electrical engineering with 5+ years of professional relevant engineering experience Senior "Go To" / Career Level Person - Has in-depth knowledge in own discipline and basic knowledge of related disciplines Solves complex problems; takes a new perspective on existing solutions Works independently; receives minimal guidance May lead projects or project steps within a broader project or have accountability for ongoing activities or objectives Acts as a resource for colleagues with less experience May represent the level at which career may stabilize for many years Engineer IV - bachelor's degree in electrical engineering with 8+ years of professional relevant engineering experience. Lead/Specialist - Is recognized as an expert in own area within the organization Has specialized depth and/or breadth of expertise in own discipline or function Interprets internal or external issues and recommends solutions/best practices Solves complex problems; takes a broad perspective to identify solutions May lead functional teams or projects Works independently, with guidance in only the most complex situations Experience Experience with AutoCAD Electrical CAD software. Experience with PLCs, HMIs, VFDs, and test equipment, including Rockwell Automation software, Siemens software, and National Instruments LabVIEW. Knowledge of NFPA 70, 70E, and 79, and other technical codes. Knowledge of basic networking concepts and SQL Database. Skills Demonstrate initiative and accept responsibilities with minimal supervision. Strong ownership and results-driven mindset. Good judgment, self-motivation, and safety consciousness. Excellent organizational skills. Superior written and oral communication abilities. Adaptability to handle diverse assignments and changing priorities. Hands-on work capability and effective collaboration on the shop floor. Critical thinking and exceptional problem-solving skills. Proficiency in supporting and troubleshooting industrial equipment. Flexibility to work off shifts, travel between facilities in Northeast Ohio, and as required. Effective teamwork with employees at all organizational levels. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

UniFirst First Aid + Safety is seeking a reliable and hardworking Bid & GPO Coordinator to join our community. As a Bid & GPO Coordinator, you will be responsible for identifying relevant public and private sector bids and distributing them to the appropriate sales managers. You'll also help maintain GPO contract records, vendor registrations, and payment systems including EDI (Electronic Data Interchange) setups. When working with UniFirst First Aid + Safety we provide a variety of shifts. Our standard is a 5-day work week, enjoy two days off a week. We have an immediate opening and provide on the job training. Pay & Benefits: On-the-job training + 401K with Company Match, Profit Sharing, Health Insurance, Employee Assistance Program, Life Insurance, Paid Time Off, Direct Payroll Deposit, Tuition Reimbursement, 30% Employee Discount, Employee Referral Bonuses. What's in it for you? Training: With the most in-depth training platform in the industry, our employees get top quality skills training designed to enhance their performance and assist them with their career potential and advancement. Career Mobility: We're a growing company offering significant avenues for personal development and growth. Some companies like to promote from within, we love to! Technology: UniFirst's many cutting edge sales tools and innovative programs are designed with one purpose in mind - to help you succeed. Community Culture: Our unique community culture is what makes UniFirst an organization that stands out from the rest. Diversity: At UniFirst, you'll find an environment packed with different cultures, personalities, and backgrounds because we know it takes many kinds of people to make us successful. What you'll be doing: Research and track local, state, and commercial bid opportunities using bid platforms and procurement portals Monitor and identify contract opportunities related to safety products, first aid, PPE, and training services. Communicate qualified bid opportunities to appropriate regional and local sales managers. Maintain a shared calendar or report of open, upcoming, and closed bids. Assist with registering the company as a vendor with new agencies and maintaining vendor credentials Support maintenance of GPO contract documentation and ensure accurate records of partner portals like Sourcewell, NPP, Vizient, etc. Collaborate with internal teams to support EDI onboarding and updates for key GPO and commercial accounts. Assist with ensuring compliance and troubleshooting for payment portals and electronic ordering platforms. Work closely with the sales operations team to share bid timelines and requirements in a timely and clear format. Performs other duties and responsibilities as may be reasonably required by the Manager or Supervisor Qualifications What we're looking for: Associate degree in Business Administration or related fields, or equivalent relevant experience. Must be 21 years of age or older. 1-3 years of experience in an administrative, coordination, or support role (preferably in sales, contracts, or procurement). Experience using public procurement websites or bid tracking systems is preferred. Proficiency in Microsoft Office Suite (Excel, Word, Outlook, OneDrive, Teams) for managing reports, documents, and communications Comfortable researching online databases and working with shared documents or report Strong communication skills - written and verbal - to coordinate with internal teams. High attention to detail and organizational ability Familiarity with group purchasing organizations (Sourcewell, NPP, Vizient) is a plus but not required. Familiarity with EDI systems, payment platforms, and electronic ordering protocols is preferred Constant focus on continuous improvement, innovation and quality Familiarity with the use of ChatGPT, Grok and other AI search and research tools Interest in workplace safety, compliance, or public procurement. Able to manage multiple tasks and meet deadlines with minimal supervision Proactive and curious - you enjoy hunting down information and sharing it with others. Comfortable supporting technical or system setup related to ordering and invoicing. Ability to lift and carry 30 lbs. About UniFirst First Aid + Safety UniFirst First Aid + Safety is a division of the UniFirst Corporation. UniFirst First Aid + Safety is one of the largest providers of First Aid, AEDs, Compliance Training, Safety and PPE products in the United States. Businesses such as manufacturing, office buildings, retail, construction, logistics, automotive, and government agencies, are just a few examples of our current customer base. We are part of a $70 million division within a $1.8 billion company. UniFirst is an equal opportunity employer. We do not discriminate in hiring or employment against any individual on the basis of race, color, gender, national origin, ancestry, religion, physical or mental disability, age, veteran status, sexual orientation, gender identity or expression, marital status, pregnancy, citizenship, or any other factor protected by anti-discrimination laws.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27882 Purpose To provide technical and process support for PC Board manufacturing operations. Job Duties and Responsibilities Provides technical and process support related to PC Board production, prototype, and process development. Uses schematics, diagrams, written and verbal descriptions or defined plans to perform testing and troubleshooting on electronic or mechanical components, equipment or systems. Gathers, maintains, formats, compiles and manipulates technical data using established formulae and procedures and performs detailed mathematical calculations. Address concerns reported through employee suggestion and near-miss systems. Encouraged to initiate changes for continuous product and process improvement. Basic Requirements Minimum of a high school education or GED is required. Minimum 5 years of work experience or Associate Degree in related field. Rotational availability between 1st and 2nd shift is preferred. Has full proficiency in a range of technical processes or procedures (or deep skills in a single area) through job-related training and considerable work experience Completes a variety of atypical assignments Works within defined technical processes and procedures or methodologies and may help determine the appropriate approach for new assignments Works with a limited degree of supervision, with oversight focused only on complex new assignments Acts as an informal resource for colleagues with less experience Effective written and oral communication skills. Strong desire to take ownership and drive results. Ability to analyze data to drive decision making. Good organizational skills and computer skills. Proficient in the use of MS Office including but not limited to Word, Excel, PowerPoint. On an as needed basis, train, assist and observe other department personnel (as qualified) on the department equipment and/or process for improvements such as but not limited to safety, quality, ISO 14001 & 45001 and manufacturing proficiency/efficiency. Environmental Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books such as SSW Specifications, Plant Rules and Regulations. Safety Data Sheets are stored electronically and available 24/7. In an emergency SDS may be accessed at Security. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment: See Department PPE Chart Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

New, easy-to-apply options are available for this role: chat with our recruiting assistant Ana at careers.cargill.com or text CargillJobs to 60196. Want to build a stronger, more sustainable future and cultivate your career? Join Cargill's global team of 160,000 employees who are committed to safe, responsible and sustainable ways to nourish the world. This position is in Cargill's protein and salt business, where we provide wholesome, high-quality food products to a wide range of customers, from foodservice operators and grocery stores to manufacturers and exporters. Job Location: Lake Odessa, MI Job Type: Full Time Shift(s) Available: 2nd Compensation: $30.60-$41.80/h Sign-on Bonus: $5,000 Relocation Bonus: $5,000 Benefits Information Shift Differential Weekly Attendance Bonus Medical, Dental, Vision, and Prescription Drug Insurance Health and Wellness Incentives Paid Vacation and Holidays 401(k) with Cargill Matching Contributions Flexible Spending Accounts (FSAs) Short-Term Disability and Life Insurance Employee Assistance Program (EAP) Tuition Reimbursement Employee Discounts Principal Accountabilities Troubleshoot mechanical and electrical issues independently Apply strong problem-solving and programming troubleshooting skills, preferably with Allen-Bradley Ensure reliability of manufacturing processes and compliance with standards Perform preventative and annual maintenance on equipment Safely operate hand tools, power tools, and electrical testing equipment Read and interpret mechanical, electrical, and control schematics Follow all safety procedures, including Lockout/Tagout (LOTO) Identify, plan, and execute follow-up maintenance work Prepare and maintain safe, organized work environments Respond to unplanned maintenance needs as directed Accurately complete and document work orders and maintenance records Communicate maintenance updates through written pass-downs Maintain and troubleshoot electronic controls and instrumentation Use diagnostic tools (e.g., oscilloscope, VOM) to test and repair systems Required Qualifications Electrical/Maintenance Journeyman License in the state of Michigan 3 years manufacturing maintenance experience Basic programming and advanced troubleshooting skills, preferably with Allen-Bradley High School or GED Equivalent Be able to troubleshoot PLCs and Ladder logic Be willing to be a part of the Hazmat team Strong electrical & mechanical aptitude Ability to read & interpret blueprints or other forms of engineering drawings Ability to read & interpret detail blueprints, P&IDs, single-lines, and wiring schematics Ability to work weekend and off shift hours as needed Preferred Qualifications Computer literacy and willingness to learn SAP/PPE systems Allen-Bradley programming and troubleshooting experience Maintenance experience in a food processing environment Proficient with test/calibration tools (RTD calibrators, multimeters, etc.) Ability to troubleshoot 480 VAC 3-phase, 120 VAC, and 24VDC circuits Equal Opportunity Employer, including Disability/Vet To apply using chat/text, please click Apply Now button OR use this link to create a login to apply.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Hourly Full-Time Function: Manufacturing Pay Range: ($45,968.00 - $68,952.00) Target Bonus: % Req ID: 27333 Purpose This role is responsible for overseeing quality assurance checks on incoming materials, ensuring compliance with specifications, conducting PAPR inspections, and contributing to related projects. It also plays a critical role in executing stock audits and supporting the rejection processes for subsidiary operations Reports to Quality Assurance Manager. Job Description Promote an atmosphere of continuous process and employee improvement. Support or drive Continuous Improvement activities. Enforce quality standards in all facets of the assigned areas. Assist with the evaluation, proper identification, and disposition of all non-conforming items and materials. Follow all significant product, document and process changes which affect quality. Work with departmental supervision in developing and maintaining a trained work force. Define, troubleshoot, and assist in resolution of daily production quality problems. Must have an uncompromising attitude towards Quality. Maintain manufacturing quality performance metrics and/or quality records. Manage Quality aspects of Stop Shipment process, from initiation to closure. Take active role in Stop Ship investigations and Stop Ship rework tracking/coordination. Take active role in analysis of scrap and yield opportunities. Perform work center, finished product and process audits, as required. Create Process Maps. Initiate CAPA Determinations. Report safety near misses and incidents whenever applicable. Basic Requirements Technician IV: Vocational training and 8+ years of experience in a relevant work environment is required; or High School Diploma/GED with 10+ years' experience in a relevant work environment. a. Has advanced and specialized expertise, typically developed through a combination of job-related training and considerable work experience b. Works autonomously within established procedures and practices c. May act as a lead, coordinating and facilitating the work of others Ability to work effectively and cross-functionally on the shop floor on a regular basis. Demonstrated computer skills in MS Office and Windows operating system. Ability to develop and maintain records and to follow projects through to conclusion. Basic understanding and knowledge of manufacturing engineering and quality standards. Ability to use measurement and inspection tools such as Calipers, Micrometers, Pins, Gauges, Protractor, and Scale. Capable of frequent standing and walking and lifting up to 60 lbs Must have excellent attendance, safety and work record Ability to work rotating shifts. Environmental, Health, and Safety Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS and JHA procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS procedures are contained in reference books, such as SSW Specifications, Plant Rules and Regulations, and Material Safety Data Sheets. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS and JHA procedures. Personal Protective Equipment PPE per EHS 560. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27996 Scope Responsible for the timely and proper lubrication and maintenance of mechanical, pneumatic, and hydraulic equipment. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader. Reports directly to the department Foreman. Responsibilities Primary duties to perform this job include: Performs all task under limited supervision. Provides training and assistance to less experienced Oilers. Leads, organizes, maintains, and ensures completion of a lubrication schedule. Assumes ownership of work task and demonstrates initiative to get work completed. Evaluates and recommends equipment lubrication schedule per experience and manufacturers recommendations. Order and maintain oils, greases, and solvents necessary to complete task. Assist with keeping neat and orderly records on work performed. Work with Engineering, Production Team Leads, Foreman, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, may be required to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Foreman. Quality Must understand the Company's Quality Policy and how it relates to this job. Must understand the relevance and importance of the quality activities and how they contribute to the achievement of the quality objectives. Environmental, Health & Safety (EHS) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA and EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe manner and observe all company EHS Procedures. Follow safe equipment operating procedures and only operate equipment when guards are in place and in good condition. Know that the company EHS Procedures, Company Specifications, Work Instructions, Plant Rules and Regulations, Job Hazard Analysis (JHA), and Safety Data Sheets (SDS) can be accessed by supervision and are located at Security, and are available upon request. Immediately notify the Foreman of any safety hazard, equipment not operating correctly, or if there are any questions regarding EHS procedures. PERSONAL PROTECTIVE EQUIPMENT - Follow the personal protective equipment policy detailed in Plant Rules & Regulations EHS560 & EHS580. Skills, Aptitude and Abilities High School education or equivalent. Must have an advanced knowledge of proper industrial lubrication techniques and applications. Must have a basic knowledge of mechanical systems and the ability to understand hydraulic and pneumatic systems. Must have a basic ability to diagnose the root cause of a problem and adjust lubrication as required. Must have a basic level of knowledge and experience reading mechanical drawings and service manuals. Excellent attendance required. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Training As directed by the department Foreman in conjunction with experienced personnel. The department Foreman shall ensure that the employee receives the following training at the appropriate times per the Maintenance Department Training Matrix. The department Foreman shall determine when an individual has completed the training and is qualified to assume these responsibilities. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Manufacturing Pay Grade and Range: USXX - Grade USXX Hourly 37$16.68-$27.00 Target Bonus: 5.0% Req ID: 27762 Job Responsibilities Build Mechanical sub-assemblies, final assemblies and any other Mechanical task for the job. Follow safety procedures/ training as outlined and identified by Fori Automation management, MIOSHA, and OSHA. Complete as required in process QC check sheets. Complete as required QC audits. Assure good craftsmanship on jobs that are being built. Follow good housekeeping practices. Take direction from Leader and/or Supervisor Provide feedback on job status to Mechanical Assembly Leader. Know and understand due dates for jobs and schedule work accordingly. Follow-up with supervisor on daily basis to report progress of job(s) being worked on. Assist in disassembly, packing and loading of machines for shipment. Fill-in where required for absences. Order material and follow-up with receiving when required. Assist in start-up/de-bug of equipment. Recommend as appropriate work methods and/or materials that will improve existing designs. Travel as needed to assist in installations, de-bug, tryout, or problem solving at customer locations. Read and interpret build prints. Work with Mechanical Engineers and build Leaders to correct any problems with design of the machine/controls. Recommend, initiate, and follow-up as needed on engineering changes and document according to ECO procedures. Work on continuous improvement projects as needed. Support special assignments as needed. Provide training and assistance to new employees. Job Requirements High School Diploma required 5 years experience as a Machine Builder Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Shelby Employment Status: Hourly Full-Time Function: Engineering Pay Range: ($24.00/hr - $38.00/hr) Target Bonus: 5.0% Req ID: 27586 Summary Fori Automation, a Lincoln Electric company, is a global leader in designing and integrating automated assembly, welding, material handling, and testing systems. We deliver world-class automation solutions to leading manufacturers worldwide. We're seeking an experienced Mechanical Designer to join our Weld Systems team in Shelby Township, MI. In this role, you'll design and develop mechanical systems for automated welding equipment, ensuring precision, performance, and manufacturability. At Lincoln Electric, we invest in our people. In addition to competitive pay, we offer an annual bonus plan, tuition reimbursement, comprehensive medical/dental/vision benefits, 401(k) with company match, paid time off, and many other outstanding benefits. What You'll Do Develop mechanical concepts and detailed designs using 2D and 3D CAD tools. Focus design on tooling and fixture creation. Create accurate Bills of Materials (B.O.M.) and design documentation. Apply engineering calculations to verify design integrity (e.g., beam stress). Utilize standard designs, specifications, and part/vehicle data to build robust systems. Organize and maintain CAD files in accordance with company and project standards. Select appropriate materials and components for optimal performance and cost. Ensure all designs meet NAAMS standards and relevant industry standards for construction, safety, and ergonomics. Collaborate with cross-functional teams to deliver high-quality automation systems on time. Required Education & Experience Bachelor's degree in Mechanical Engineering preferred (or equivalent experience). 1+ year of design/layout experience (or 2+ years in a similar role without degree). Experience designing MIG and/or resistance weld machines preferred. Proficiency in 3D CAD (Inventor, SolidWorks, or similar) and 2D AutoCAD. Strong grasp of manufacturing principles, materials, and design best practices. Ability to perform basic engineering calculations and apply advanced algebra and design techniques. Team-oriented mindset with the ability to thrive in an ISO9001:2000 environment Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

We want you to help us shape the future of shopping experiences and deliver on our purpose of connecting people with the products and experiences that enrich their lives. Joining Retail Odyssey, an Advantage Solutions company, means joining a network of 65,000 teammates serving 4,000+ brands and retail customers across 40+ countries. All the while, being provided the opportunities, support, and enrichment you need to grow your career. In this role, you will provide in-store merchandising support to Retailers to meet shoppers' needs. This includes building displays and end caps, resetting shelves with product rotation, and tracking inventory to ensure that stores and suppliers maximize sales opportunities. Are you ready to shape the future of shopping and get it done with us? What we offer: Competitive wages; $14.00 per hour Growth opportunities abound - We promote from within No prior experience is required as we provide training and team support to help you succeed Additional hours may be available upon request We offer benefits that can be customized to meet your family's needs, including medical, dental, vision, life insurance, supplemental voluntary plans, wellness programs, and access to discounts through Associate Perks Now, about you: Are comfortable interacting with customers and management in a friendly, enthusiastic, and outgoing manner You're 18 years or older Can perform physical work of moving, bending, standing and can lift up to 50 lbs. Have reliable transportation to and from work location Demonstrate excellent customer service and interpersonal skills with our clients, customers and team members Are a motivated self-starter with a strong bias for action and results Work independently, but also possess successful team building skills Have the ability to perform job duties with a safety-first mentality in a retail environment If this sounds like you, we can't wait to learn more about you. Apply Now!

The Sr. Technical Thermal Sales Engineer, Global Strategic Accounts (GSA) drives the sales of thermal management equipment by providing technical expertise and guidance. This position focuses on reviewing specifications, analyzing mechanical drawings, and collaborating closely with GSA Account Managers to help meet customer needs and drive business growth. RESPONSIBILITIES Review and respond to RFPs for Vertiv thermal management solutions, including specification analysis, mechanical drawing review, and assistance with initial equipment configurations. Support the development of concept thermal designs and provide technical input on product selection, sizing, and schematic layouts. Participate in virtual or in-person design reviews with customers and internal teams. Collaborate with cross-functional teams such as offering management, engineering, and sales to support product development and customer solutions. Prepare technical documentation and project-specific bid forms as needed. Contribute to account planning and customer engagement strategies by providing technical insights. Serve as the SME for Vertiv during customer visits and industry events as needed. Stay informed on industry trends, technologies, and materials to support continuous improvement and innovation. Provide feedback to product managers to help guide product enhancements and future development. Help to foster a culture of innovation and continuous improvement within the department. Provide training and mentorship to less experienced team members. MINIMUM QUALIFICATIONS Bachelor's degree in engineering, business, or related field of study (or equivalent combination of education and experience). 4-8 years of industry technical experience. Experience in leading/managing high profile projects. Technical knowledge of Vertiv's thermal management product portfolio. Deep market dynamics and industry knowledge. Proven track record of influencing engineering accounts. Experience working with sales offices. Salesmanship and self-confidence to deal with frequent, stressful customer relationship issues. Excellent sales presentation skills. Strong problem-solving skills and ability to translate technical challenges into actionable plans. PHYSICAL & ENVIRONMENTAL DEMANDS No special physical requirements. TIME TRAVEL REQUIRED 30-50% The successful candidate will embrace Vertiv's Core Principals & Behaviors to help execute our Strategic Priorities. OUR CORE PRINCIPALS: Safety. Integrity. Respect. Teamwork. Diversity & Inclusion. OUR STRATEGIC PRIORITIES Customer Focus Operational Excellence High-Performance Culture Innovation Financial Strength OUR BEHAVIORS Own It Act With Urgency Foster a Customer-First Mindset Think Big and Execute Lead by Example Drive Continuous Improvement Learn and Seek Out Development At Vertiv, we offer the stability of a global leader in a growing industry and the opportunity of a startup. We design, manufacture and service the mission-critical infrastructure technologies for vital applications in data centers, communication networks and commercial and industrial environments. With $5 billion in sales, a strong customer base and global reach in nearly 70 countries, our move to establish a standalone business enables us to deliver greater value to our customers and create new opportunities for our people. Vertiv is an Equal Opportunity/Affirmative Action employer. We promote equal opportunities for all with respect to hiring, terms of employment, mobility, training, compensation, and occupational health, without discrimination as to age, race, color, religion, creed, sex, pregnancy status (including childbirth, breastfeeding, or related medical conditions), marital status, sexual orientation, gender identity / expression (including transgender status or sexual stereotypes), genetic information, citizenship status, national origin, protected veteran status, political affiliation, or disability. If you have a disability and are having difficulty accessing or using this website to apply for a position, you can request help by sending an email to ********************** . If you are interested in applying or learning more about this role, please visit the company's career page located on Vertiv.com/Careers. Work Authorization No calls or agencies please. Vertiv will only employ those who are legally authorized to work in the United States. This is not a position for which sponsorship will be provided. Individuals with temporary visas such as E, F-1, H-1, H-2, L, B, J, or TN or who need sponsorship for work authorization.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Employment Status: Salary Full-Time Req ID: 27647 Purpose Design, implement, and maintain embedded software components for use in end products. Continually improve development techniques in order to create software more efficiently and reliably. Apply engineering knowledge to provide creative software solutions for real world customer issues and use cases. Job Duties and Responsibilities Develop multithreaded controls with industrial Real Time Operating Systems and Embedded Linux using C and C++ languages. Developing software for communication with industrial automation networks (e.g. CAN, Ethernet/IP), Internet protocols (e.g. HTTP, FTP), and wireless (e.g. Wi-Fi and Bluetooth). Developing software for embedded graphical displays. Interact with key stakeholders including marketing, suppliers, customers, distributors, and sales engineers to drive new product innovation. Maintains records of all work in process and documents interim/final results in the applicable format; these include Project Definitions, Milestone Plans, ES Reports, Technical Reports, Project Tracking Progress Reports and presentations at meetings/seminar. Develop and refine automated test setups, frameworks, and methods for embedded systems, including unit tests, integration tests, and system-level test to support new product development, product evaluations, and competitive benchmarking. Coordinate activities of internal and external technical support personnel as required. Troubleshoot issues in development and production environments, ensuring rapid resolution and minimizing downtime. Reading and interpreting schematics and component data sheets. Assignments are broad in nature, requiring originality and ingenuity. Has appreciable latitude for unreviewed action or decision. Assumes additional responsibilities as needed or directed in support of the Company's 2025 Strategy. Basic Requirements Level II: Four-year Engineering degree is required and, Minimum of three (3) years Engineering experience. Level III: Four-year Engineering degree is required and, Minimum of five (5) years Engineering experience. Strong familiarity with embedded systems architecture, design considerations, and hardware-software interactions. Industry experience writing C for embedded platforms. Strong understanding of testing methodologies and frameworks for embedded systems Effective communication skills, with the ability to convey complex technical concepts to both technical and non-technical stakeholders. Ability to work independently and as part of a team. Excellent organizational skills. Ability to handle a constantly changing set of priorities. Initiative to take ownership of product designs. Possesses and applies a broad knowledge of principles, practices and procedures of field of specialization to the completion of difficult assignments. The selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experience. Competencies Proficiency in C and C++ programming languages Knowledge of Real Time Operating Systems and Embedded Linux. Experience in developing software for industrial automation networks, internal protocols, and wireless communication. Professional experience with TDD, writing unit tests, automated testing, and continuous integration type frameworks. Familiarity with Azure DevOps and Agile development practices. Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22821 Employment Status: Hourly Full-Time Function: Maintenance Req ID: 27095 Purpose Ability to machine, mill, and grind various types of metals. Primarily 1st shift schedule, could include 2nd, 3rd, split shifts, weekends, holidays, 12 hour shifts. Daily work activity is directed by the Group Leader and a Maintenance Machinist A. Reports directly to the department Manager. Job Responsibilities Performs all tasks under general supervision. Provides training and assistance to less experienced Machinists. Assumes ownership of work task and demonstrates initiative to get work completed. Creates and reworks machinery and equipment components according to requisition documentation, blueprints, or other drawings. Sets up equipment operation feed, speed and temperature. Follows established procedures for operating various conventional and/or CNC (computerized numerical control) manufacturing equipment for tasks such as cutting, punching, forming, drilling, tapping, turning, milling, grinding, and stamping to fabricate, form or shape manufactured parts, tools or parts assemblies from raw materials. Selects and measures raw materials and parts to specifications to prepare for production processing. Performs reworking and machining of new and spare production parts for departments. Repairs maintenance parts as needed. Verifies the accuracy of work by using calipers, micrometers, dial indicators, and various measuring instruments. Order and maintain project related material as required. Assist with keeping neat and orderly records on work performed and repairs made. Work with Engineering, Production Team Leads, Managers, Group Leaders, and fellow tradesmen to accomplish the desired result. Adjust schedule and work hours to accomplish the desired result, must be able to work weekends and holidays as required. Perform work assignments efficiently while being consistent with good safety practices. Report any maintenance and/or safety issues to supervisor. Review, understand, and follow all Company specifications and procedures, and regulatory rules and requirements that are associated with the performance of this job. Other duties as assigned by the department Manager Basic Requirements Must pass the skilled trade assessment test for this position. Must have a basic knowledge and experience reading mechanical drawings. Must have a basic knowledge and experience in proper machining and grinding techniques (Feed rates, sequencing, cutting speeds). Must have a basic knowledge and experience in setting up machine tools to produce precision parts. Must have a basic knowledge and experience in writing and modifying machine programs. Must be able to use math to calculate dimensions and determine speeds and feed rates. Ability to use various measuring devices (calipers, micrometers, dial indicators, etc.) Excellent attendance required. Must possess basic mechanical aptitude. Must possess good organizational and communication skills. Team oriented, self-motivated, safety and quality conscious; requiring minimal supervision. Capable of lifting up to 75 pounds on an occasional basis. May be required to operate basic shop equipment (hoist, forklift, scissor lift, etc.) Must be able to work in confined areas, climb ladders, and work at heights of 50 feet. Must be able to wear a respirator. Must be willing to continuously improve technical skills and knowledge. Must be able to understand and interpret the specifications and procedures related to this job. Selected candidate's Job Level and Pay Grade will be determined based upon qualifications and experiences Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Fort Loramie Req ID: 27957 Position Summary Identify the manufacturing process, recommend the machinery concept, accurately develop the cost model, create quotations and provide other supporting information as needed to sell Lincoln Electric Automation-designed equipment. **This position can sit in our Columbus, Coldwater or Fort Loramie, OH facilities and is hybrid - 2-3 days per week onsite*** Role Qualifications Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. Play an active role reviewing and developing customer process requirements as it pertains to the application of our products. Play an active role in communicating issues that could impact customer satisfaction. Position Responsibilities Evaluate the feasibility of automation systems based on data supplied by Sales, Engineering, Management and Customers. Develop manufacturing processes and concepts capable of producing systems or products Research and develop accurate cost estimates for Lincoln Electric Automation equipment. Write technical quotations and produce supporting documentation as needed. Assist as necessary with customer communication, presentations, and trade related events. Follow-up as necessary with sales, customers, and representatives. Responsible for following Department ISO procedures. Essential Skills and Experience Minimum High School Diploma, Associate degree in technical discipline desired (Business, Engineering Technology, Technical Sales, Project Management or similar) CAD (3D modeling a plus). Preferred 5 years of experience in manufacturing and design (mechanical/electrical) of industrial automated equipment. Metal forming (bending, forming, piercing, etc.) and metal joining (Laser, arc, resistance welding, etc.) experience preferred. Preferred 1-2 years of experience, working with customers and suppliers. Years of experience will influence final selection. Proficient in Word, Excel and PowerPoint. Effective writing and communication skills. Commitment to company values. Educational, training, and experience requirements may be modified at the Managements Team's discretion. Nonessential Skills and Experience Computer proficiency, including spreadsheet, word processing, and project management software. FMEA, Equipment Capability, Safety (OSHA Stds.) Environmental, Health & Safety (EH&S) Understand the Company's EHS Policy and how it relates to this job. Be aware of OSHA & EPA laws and regulations as well as the Company's Plant Rules and Regulations that pertain to this job. Work in a safe and environmentally friendly manner and observe all company EHS procedures. Know that the company EHS procedures are located on the ISO drive. Immediately notify the Supervisor if there is any safety hazard, any equipment not operating correctly, or if there are any questions regarding EHS procedures. Attend required EHS training Physical Demands and Work Environment The physical demands and work environment characteristics described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Physical demands: While performing duties of job, employee is occasionally required to stand; walk; sit; use hands to finger, handle, or feel objects, tools, or controls; reach with hands and arms; talk and hear. Repetition with activity; computer work. Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, depth perception, and the ability to adjust focus. Work environment: The noise level in the work environment is usually moderate. ISO-14001 Complies with ISO 14001, and other relevant standards. Support, implement and understand the intent of the EMS policy. Participates with ISO-14001 as required. AS 9100 w/ ISO 9001 Complies with AS9100D and ISO 9001:2015 quality management system, procedures, and work instructions General sign-off: The employee is expected to adhere to all company policies Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Coldwater Req ID: 28002 Job Responsibilities Position Summary: We are seeking applicants for a Trainee position which is an entry level Skilled Trades employee to perform general machine shop cleanup duties. This position is an opportunity to gain experience in a machine shop setting for an individual who would potentially grow into a member of LEA Coldwater's Apprenticeship Program. Role qualifications: • Must be familiar with Company quality objectives and play an active role in reaching continuous improvement objectives. • Be aware of the relevance and importance of their activities and how they contribute to the achievement of quality objectives. Position responsibilities: • Ensure cleanliness and organization of the manufacturing shop • Assist with set up and tear down of any company wide meeting • Perform other duties as assigned • Work well with helpers, Engineers, Management, and support functions Job Requirements Essential skills and experience: • Pending or earned High School Diploma • Vocational training in Machine Trades or equivalent preferred • Demonstrated aptitude for mechanical trades and applied mathematics • Demonstrated eagerness to work and learn metalworking • Basic mechanical knowledge of machines and tools • Commitment to company values. • Educational training and experience requirements may be modified at the Managements Team's discretion. Behavioral Traits: • Highly self-motivated and driven • Dependable • Organized • Active listener • Forward thinking attitude and the continual need to refine and polish work, by seeking to exceed customer and Company's expectations Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Lincoln Electric is the world leader in the engineering, design, and manufacturing of advanced arc welding solutions, automated joining, assembly and cutting systems, plasma and oxy-fuel cutting equipment, and has a leading global position in brazing and soldering alloys. Lincoln is recognized as the Welding Expert™ for its leading materials science, software development, automation engineering, and application expertise, which advance customers' fabrication capabilities to help them build a better world. Headquartered in Cleveland, Ohio, Lincoln Electric is a $4.2B publicly traded company (NASDAQ:LECO) with over 12,000 employees around the world, with operations in 71 manufacturing and automation system integration locations across 21 countries and maintains a worldwide network of distributors and sales offices serving customers in over 160 countries. Location: Euclid - 22801 Req ID: 27850 Position Overview Plant Engineering is the department within Lincoln Electric which is responsible for designing, maintaining, improving, and supporting the equipment, manufacturing processes, and plant-wide infrastructure. Past Plant Engineers have worked to create the operations as we know it today. As a Plant Technologist, you will play a pivotal role in supporting and executing projects across our manufacturing facilities in the Cleveland and Mentor areas. Your focus will be on identifying and solving technical challenges while ensuring that all equipment and processes align with the organization's safety, health, quality, and productivity standards. This role offers an exciting opportunity to contribute to the sustainability and growth of our operations. Job Duties and Responsibilities Collaborate in a team environment to execute capital projects for manufacturing facilities in the Cleveland and Mentor areas. Take responsibility for the mechanical aspects of projects, which may include documentation, equipment installation, project management, and support. Implement engineering solutions to improve equipment reliability and safety, reduce operating and maintenance costs, and effectively manage outage risks. Create and maintain sustainable documentation for use by engineering and maintenance teams. Implement solutions that comply with ISO 14001 and Environmental Health and Safety (EHS) initiatives to enhance environmental and employee health and safety standards. Provide capital cost estimates and establish project timelines to ensure successful completion of project work. Review equipment quotations to confirm compliance with desired specifications. Deliver technical support to the Production and Maintenance departments. Coordinate and interface with engineering, production, maintenance, and supply management teams. Work closely with and often manage outside engineering and construction personnel. Ensure all safety, health, environmental, and compliance requirements adhere to the appropriate regulations. Provide support for various tasks as directed by Plant Engineering managers to ensure efficient operations. Basic Requirements Education / Experience: Bachelor's degree in Engineering Technology (Mechanical) with a minimum of 3 years of experience, OR Bachelor's degree and an associate degree in related fields with 5 years of experience, OR Diploma/GED with 10 years of relevant experience. Strong desire to take ownership of tasks and deliver results. Excellent problem-solving and troubleshooting abilities. Demonstrates good judgment, self-motivation, and a commitment to safety. Proven ability to manage multiple tasks, prioritize work effectively, and meet deadlines. Flexibility to handle diverse assignments and adapt to changing priorities. Ability to perform hands-on work when needed and work collaboratively on the shop floor with employees and processes. Technically proficient in CAD modeling. Preferred systems: Solid Edge; AutoCAD. Willingness to occasionally work off shifts, travel between facilities in Northeast Ohio, and travel as required. Job Rate: Engineering Technologist II to IV Lincoln Electric is an Equal Opportunity Employer. We are committed to promoting equal employment opportunity for applicants, without regard to their race, color, national origin, religion, sex (including pregnancy, childbirth, or related medical conditions, including, but not limited to, lactation), sexual orientation, gender identity, age, veteran status, disability, genetic information, and any other category protected by federal, state, or local law.

Barnes Force Motion Control SBU is seeking a highly motivated Commodity Manager. As a Commodity Manager, you'll play a pivotal role in shaping strategic sourcing initiatives that directly influence our global operations. Partnering closely with the Strategic Sourcing Leader, you'll dive deep into procurement processes, evaluate global market trends, and lead cross-functional collaboration to drive innovation, efficiency, and value. This is more than just a sourcing role-you'll help guide a team of Sourcing Engineers, tackle complex supply chain challenges, and lead transformational changes that strengthen our competitive edge. If you're a strategic thinker who thrives in dynamic environments and is ready to make a real difference, we want to hear from you. Core Responsibilities: Identify areas for improvement, implement strategic solutions, and drive transformational changes to enhance sourcing strategies and cost-effectiveness. Work with the Sourcing team to analyze current procurement processes, identifying inefficiencies, bottlenecks, and areas for improvement. Develop recommendations aligned with global category strategies to optimize profitability and competitiveness. Collaborate with cross-functional teams to gather insights, align objectives, and implement best practices. Develop and manage measurement systems to track project progress. Implement a structured review process for sourced materials, ensuring alignment with market conditions and corporate strategies. Work with the Strategic Sourcing Leader, Sourcing Team and finance to conduct in-depth profitability analysis by region, market, and product to identify trends and opportunities for cost improvements. Monitor global commodity fluctuations and assess their impact on sourcing strategies, making recommendations for adjustments as needed. Drive continuous improvement initiatives within costing processes, leveraging data analytics to enhance efficiency and effectiveness. Perform additional duties as assigned to support global cost strategies, pricing strategies and business growth. Uphold the Barnes Group Code of Ethics and Values in all sourcing, pricing and analytical activities. Qualifications: Minimum of 5-7 years in supply chain, sourcing., procurement, process engineering, or other relevant business positions within an industrial B2B environment, with international supply chain history preferred. Minimum 5 years of experience managing a team Experience managing complex projects on a global scale Knowledge, Skills & Abilities: Strong ability to analyze processes and data to make strategic recommendations. Ability to link strategy to actionable initiatives, strong negotiating and influencing skills, and change management expertise to lead teams through process changes. Proficient in Microsoft Office (Excel, Word, Access, PowerPoint) with the ability to learn and adapt to new software. Experience with Salesforce, Power BI, Birst and M3 is preferred. Ability to work independently, manage multiple projects, and maintain a detail-oriented, structured approach to achieving planned outcomes. Solid verbal/written communication skills with all levels in the organization Strong understanding of procurement methodologies, best practices, and industry standards. Knowledge of international taxes and tariffs preferred. Basic understanding of contracts, quality clauses, and terms and conditions commonly used in business. Ability to understand spring terminology and design, drawings, and specifications to effectively convey material and quality requirements to suppliers. Education Requirements: Bachelor's degree in business, Analytics, Engineering, Supply Chain or a related field. Advanced degree preferred.