Computer aided design designer jobs in Lancaster, PA - 69 jobs

Job DescriptionDescription: Introduction RETTEW is seeking an experienced AutoCAD Designer to support our growing Subsurface Utility Engineering (SUE) team. This role focuses on utility and linear infrastructure projects and plays a critical part in delivering accurate, high-quality design documents that support safe and efficient project execution. About RETTEW RETTEW is a 100% employee-owned, multi-disciplinary engineering consulting firm with offices throughout Pennsylvania and the Midwest. We provide innovative solutions across environmental, geotechnology, transportation, land development, facilities, and energy markets. Our culture is built on collaboration, accountability, and long-term investment in our people. Work Environment Hybrid (in-office with remote flexibility after onboarding) Primary Locations: Lancaster, Lehigh Valley, Mechanicsburg, Williamsport, Pittsburgh, PA or Akron-Canton, OH Occasional outdoor work and field coordination required Position Summary The AutoCAD Designer supports SUE project teams by producing utility design drawings, exhibits, and plan sets for public and private infrastructure projects. This role is essential to ensuring design accuracy, regulatory compliance, and coordination between survey, engineering, and construction stakeholders. What You'll Do Responsibilities / Day-to-Day - Prepare detailed AutoCAD and Civil 3D drawings for utility and linear infrastructure projects - Develop plan view, profile, data bars, and sheet layouts for design and construction documents - Support electric, gas, water, sewer, stormwater, and utility crossing projects - Prepare permit plans, exhibits, and restoration plans as required - Incorporate existing conditions surveys and GPS/survey data into design files - Perform QA/QC reviews in accordance with RETTEW and practice standards - Maintain organized project files following company procedures - Collaborate with Project Managers, Engineers, and Team Leads across active projects - Serve as a technical resource or mentor for CADD operators as needed Qualifications Required - Associate's degree, technical school certification, or Bachelor's degree in a related field - Minimum 5 years of AutoCAD experience supporting utility or linear infrastructure projects - Working knowledge of utility design and 811 project requirements - Experience creating plan/profile drawings and construction-ready documents - Proficiency with AutoCAD and Civil 3D - Strong attention to detail and ability to manage multiple priorities Preferred - Familiarity with ASCE 38-22 SUE standards - Experience preparing permit plans and utility crossing exhibits - Knowledge of Civil 3D Vault systems - Experience with GPS and survey data processing - Understanding of grading, earthwork, and restoration plans - GIS experience - Experience with IFA/IFB/IFC drawings What We Offer - Competitive compensation - Employee Stock Ownership Plan (ESOP) - Comprehensive medical, dental, and vision benefits - 401(k) with company match - Generous paid time off and holidays - Hybrid work flexibility - Professional development, training, and advancement opportunities - Collaborative, employee-owned culture focused on long-term growth RETTEW is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please contact us at ******************* to request assistance. #LI-Hybrid Requirements: Requirements listed above.

A full-service construction company specializing in steel-fabricated commercial buildings is seeking an Architectural Designer to join their team. is based in Lancaster, PA. This person will work in collaboration with the Design-Build Team to design buildings that meet all client specifications. Duties include: Gather and compile building programming information, design requirements and code information for new constructions, alterations or repairs; Evaluate site conditions and constraints for building projects; Review design requirements and determine best design options for building projects; Prepare design documentation, as directed by the Design Professional, and submit to the Design-Build team and client for review and approval; Use CAD tools effectively to prepare design and construction drawings including 3D models. Job Requirements: 5+ years' experience in building drafting and design. Proficient with Revit and/or AutoCAD and Sketchup. #IND

Primary location: Lancaster, Pennsylvania Employment status: Full-Time Travel: 11%-25% Non-compete: No The estimated base salary range for this role is “$75,000 to $95,000” per year. Individual pay is based upon location, skills and expertise, experience and other relevant factors What does it mean to work at Armstrong? It means being immersed in a supportive culture that recognizes you as a key player in Armstrong's future. We are a large company with a local feel, where you will get to know and collaborate with leadership and your colleagues across the company. By joining us, you'll have the opportunity to make the most of your potential. Alongside a competitive remuneration package, you will receive: A benefits package including: medical, dental, prescription drug, life insurance, 401k match, long-term disability coverage, vacation and sick time, product discount programs and many more. Personal development to grow your career with us based on your strengths and interests. A casual work environment where we have a recognition program for our team, and service awards. You will also be able to make the most of our fitness center and lunchtime cafe. A working culture that balances individual achievement with teamwork and collaboration. We draw on each other's strengths and allow for different work styles to build engagement and satisfaction to deliver results. As an integral member of our multidisciplinary team, the Product Designer will support and contribute to a variety of programs-from early-stage research and ideation through concept and product specification development, production, and commercialization. Leveraging expertise in industrial and interior design to translate design trends, customer insights, and brand strategy into compelling, market-ready concepts that elevate the built environment. What's in it for you? Opportunity to shape innovative, market-ready products from early research through commercialization. Collaborate cross-functionally on high-visibility projects, trade shows, and prototype installations. Work in a creative, trend-driven environment with hands-on prototyping and real impact on the built environment. What does a Product Designer do? Design Research & Trend Analysis: Conduct and synthesize research from industry publications, trade shows, and customer feedback to inform concept development and strategic direction. Stay current with global design trends, materials innovation, and sustainability practices relevant to commercial interiors. Concept Ideation & Development: Drive ideation and concept creation, including sketching, rendering, and presenting ideas for internal critique and customer validation. Develop creative concepts that align with business strategy, customer insights, performance requirements, and manufacturing capabilities. Market-Specific Product Development: Develop design boards and solutions for key verticals such as Healthcare, Education, Retail, and Office environments, leveraging knowledge of segment-specific trends, codes, and performance needs. Product Stylization & Restyling: Refresh and restyle standard product lines, utilizing creative product pairings, mixed-use scenarios, and innovative finishes to inspire the Architecture & Design (A&D) community. Technical Design & Prototyping: Produce technical drawings, 2D and 3D models, and support the creation of physical prototypes and mockup installations. Collaborate with engineering and manufacturing teams to ensure design intent is realized in final products. Trade Show & Customer Engagement: Influence the design of major industry trade show booths (e.g., AIA, NeoCon), aligning booth concepts with brand identity and marketing goals. Contribute to the design of demo kits and visualization tools that enhance customer engagement. Cross-Functional Collaboration: Partner with marketing, product management, and project teams to align design concepts with brand strategy, technical feasibility, and customer needs. Actively participate in brainstorming, ideation sessions, and cross-functional meetings to support the full design-to-launch process. Project Documentation & Communication: Maintain organized documentation of design concepts, renderings, and mockups across digital and physical platforms. Communicate design intent clearly and effectively to diverse audiences. Hands-On Implementation: Provide hands-on support in building sample components and leading the physical assembly of prototype installations. Required Qualifications Bachelor's Degree in Industrial Design, Architecture, Interior Design, or a related field. 3-5 years of design experience, including research, concept development, materials application, and mechanical development. Strong visual communication skills and proficiency in design tools (Adobe Creative Suite, SketchUp, AutoCAD, Revit, parametric 3D CAD software). Experience with technical drawings, product specifications, and installation detail documentation. What will make you successful? Familiarity with architectural materials, systems, and sustainability principles. Hands-on skills in prototyping and building large-scale mockup installations. Effective communication, presentation, and collaboration skills. Strategic mindset with a passion for design innovation and customer experience. Strong portfolio demonstrating innovative solutions, creative thinking, and attention to detail. What will make you stand out? Experience with Autodesk Inventor Experience designing with sheet metal, solid wood, veneer, and architect-specified installed products. Knowledge of design techniques, tools, and principles involved in the production of precision technical drawings, models, and documentation. Experience with BIM workflows and digital visualization tools. Strong attention to detail and a keen eye for aesthetics and visual balance. Travel: 10-15% Physical and Mental Demands The demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is regularly required to: sit for prolonged periods; repetitive motion of hands/wrists/fingers; concentrate and repeat the same physical or mental activities over and over; think analytically and be exact or highly accurate; make decisions such as to identify complex problems, develop options and implement solutions; work in a team; ability to maintain regular, punctual attendance consistent with the ADAAA, FMLA and other federal, state and local standards; pay attention to and remember details; communicate effectively including active listening to understand points being made, and asking appropriate questions and not interrupting inappropriately; speak to convey information effectively; write to communicate effectively as appropriate for the needs of the audience; read to understand work related documents; move between different physical locations within and between buildings; and push, pull, carry and lift in the normal course of travel. Work Environment The work environment characteristics described here are representative of those an employee encounters while performing the functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Requires working indoors in environmentally controlled conditions with standard level of noise common to an office environment including office equipment and co-workers speaking to each other and on phones. Employees are required to wear personal protective equipment when entering the floor of manufacturing facilities based on the specific requirements of each location. Why should you join Armstrong World Industries? Armstrong World Industries (AWI) is an Americas leader in the design and manufacture of innovative interior and exterior architectural applications including ceilings, specialty walls and exterior metal solutions. With approximately $1.4 billion in revenue, AWI has about 3,700 employees and a manufacturing network of 21 facilities in North America. At home, at work, in healthcare facilities, classrooms, stores, or restaurants, we offer interior solutions that help to enhance comfort, save time, improve building efficiency and overall performance, and create beautiful spaces. For more than 160 years, we have built our business on trust and integrity. It set us apart then, and it sets us apart now, along with our ability to collaborate with and innovate for the people we're here to serve - our customers, our shareholders, our communities and our employees. We are committed to developing new and sustainable architectural solutions, with design and performance possibilities that make a positive difference in spaces where we live, work, learn, heal and play. It's an exciting, rewarding business to be in, and we're committed to continue to grow and prosper for the benefit of all of our stakeholders. We hope you join us. Our Sustainability Ambition "Bringing our Purpose to Life" - lead a transformation in the design and building of spaces fit for today and tomorrow. We are committed to: Engaging a diverse, purpose-driven workforce; Transforming buildings from structures that shelter into structures that serve and preserve the health and well-being of people and planet; Pursuing sustainable, innovative solutions for spaces where we live, work, learn heal and play; Being a catalyst for change with all of our stakeholders; and Making a positive difference in the environments and communities we impact. About the location (Lancaster PA) Lancaster, PA. A great central location in South Central Pennsylvania, Lancaster is ideally situated for easy access to major metropolitan cities such as Philadelphia, Baltimore, Washington DC, and New York City. Lancaster offers a vibrant arts and entertainment community with wonderful historic sites, B&Bs, museums, great shopping, entertainment venues and restaurants. Armstrong is committed to engaging a diverse, purpose-driven workforce. As part of our dedication to diversity, AWI is committed to Equal Employment Opportunity and all qualified applicants receive consideration for employment without regard for race, sex, color, national origin, ethnicity, gender, protected veteran status, disability, sexual orientation, gender identity, or religion. We are also committed to providing reasonable accommodations for qualified individuals with disabilities and disabled veterans in our job application procedures. If you need assistance or an accommodation due to a disability, you may contact us at by email at AWI talent acquisition and let us know the nature of your request and your contact information. Requests for accommodation will be evaluated on a case-by-case basis. Please note that only inquiries concerning a request for reasonable accommodation will be responded to from this email address. Come and build your future with us and apply today!

What you will do Johnson Controls is hiring a Mechanical Designer! This individual will provide drafting and design support to the engineering department by assuming full drafting responsibility for assigned datacenter project. We are seeking candidates who have strong knowledge of system design using Creo. This position is based in New Freedom, PA, but can be remote for the right candidate! How you will do it Proficient knowledge of Creo 3D design software. Proficient knowledge of PLM Windchill is a plus. Displays basic project management skills Prepares layouts of subassemblies or portions of projects that require a high degree of precision and expertise from engineering data in one or more of the following areas: Piping assemblies. Sheet metal and plate fabrication. Weldments. Heavy equipment manufacturing. Pressure vessel code. Prepares change orders after investigating change requests, resolves shop problems and proposes redesigns to improve performance or reduce costs. Check work of others that is similar in type and complexity to that which is personally performed. Proficient knowledge of manufacturing processes (Welding, Bending, Brazing, Piping, Insulation, Assembling etc). Demonstrates proficient knowledge of design procedures such as retrieving and applying information from engineering standards and schematics, purchasing and manufacturing specifications for preparation, release and revision of drawings and Bills of Material. Demonstrates knowledge of SAP or other Material Resource Planning software to investigate existing material and BOMs. What you will need Required Associates degree and 7+ years of mechanical design experience 3+ years of experience with Creo 3D design software System level design experience or experience designing within a heavy equipment/manufacturing industry Proficiency in Microsoft Excel, Word and Powerpoint HIRING HOURLY RANGE: $60,000 - $80,000 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. The posted salary range reflects the target compensation for this role. However, we recognize that exceptional candidates may bring unique skills and experiences that exceed the typical profile. If you believe your background warrants consideration beyond the stated range, we encourage you to apply. To support an efficient and fair hiring process, we may use technology assisted tools, including artificial intelligence (AI), to help identify and evaluate candidates. All hiring decisions are ultimately made by human reviewers. For details, please visit the About Us tab on the Johnson Controls Careers site at ***************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

Job DescriptionThe Digital team exists to serve LCBC's Ministries by developing technology solutions that help support and move our mission forward while creating visually engaging and effective digital experiences that provide value to our Attendees. The Product Designer is responsible for creating innovative and effective design solutions for LCBC's digital channels including: Websites, micro-sites, Mobile Apps, email campaigns, and TV Apps. At LCBC (Lives Changed By Christ), we're on a mission to introduce people to Jesus and together fully follow him. For more than 30 years, this mission has guided us daily as we work with one eye on eternity, work with excellence, and bring our best in everything we do, knowing that this honors God. We also believe that who you are becoming is more important than what you do, so we want to help you grow deeper in your faith, closer in your relationships, and excel professionally. We are one church with multiple locations throughout Pennsylvania, and we're growing! You'll Contribute to Life Change By: Driving community engagement through the design of informative and inspiring digital campaigns spanning across all of LCBC's digital channels. Develop and champion digital design standards based on goals outlined by Digital Director. Design digital graphics for various onscreen display mediums including Desktop, Mobile devices, and OTT TV Apps. Develop flexible, intuitive CMS templates that can be utilized by non-technical staff. Skills Needed to Succeed: Proficient in Adobe Photoshop, Adobe Illustrator, Figma and other design tools. Proficient in HTML and CSS. Excellent in online content presentation, layout, and information design. highly skilled in web-based information architecture and user-centered design methods. Knowledgeable about industry standard best practices. Exceptional ability to develop user experience (UX) and translate wireframes and designs into code. Passionate and comfortable working in a highly collaborative, team-based environment. Strong understanding of mobile design and responsive design methods and best practices. Self-starter that's capable of juggling multiple projects simultaneously. Experience with Expression Engine, Craft, WordPress or other PHP-based CMS. Adept in JavaScript or jQuery, and other front-end technologies. Experience working with clients and coaching around design systems and solutions. 3+ years of experience in Web design, UI/UX Design, or similar field. Strong design portfolio demonstrating UI/UX experience, as well as responsive, mobile-first, and user-centric design principles. Benefits We Offer: Competitive medical, dental and vision coverage Retirement plan contribution and employer match Annual counseling benefit Flexible schedules Generous and immediate paid time-off Casual dress Quarterly professional and spiritual development days Intentional investment in personal and professional development Personal Qualifications: Can articulate an identifiable salvation experience and lives out a pattern of spiritual development and regular attendance and participation at LCBC. Supports LCBC's mission, priorities, philosophy of ministry, and doctrinal statement. Supports LCBC's core values: we run after the one; we pursue excellence; we prioritize relationships; we deploy people for impact; we are real and relatable. Displays a winning attitude and a spirit of cooperation; communicates truth with grace; prays about everything; and has a willingness to serve on a team. Shows a desire to grow, develop, and mature, both spiritually and professionally. Exhibits pride in the image of LCBC as it reflects on the image of Christ portrayed to attendees, staff, and guests. Be an LCBC Partner or willing to become a Partner within 60 days of employment. Join our team and see how God can use you to help create environments where lives can be changed by Christ. You'll get a front-row view of the work God is doing at our church and play a role in introducing people to Jesus and together fully following him.

Full-time Description Why Choose Us? Since 1949, Sieling and Jones has successfully served an ever-increasing list of architects, woodworkers and furniture manufacturers with the finest veneers, architectural paneling and other wood products. Since that time, we have become the provider of choice for FSC, green wood products and services with the addition of CNC machining and laser services, finishing, moldings and doors. At Sieling and Jones we offer a dynamic and collaborative work environment where you can develop your skills and contribute to impactful projects while enjoying a competitive benefits package including employer paid vision and life insurance while being part of a supportive team dedicated to innovation. Job description Our drafting team plays a key role in each project and in the overall company success. If you are able to manage multiple jobs, adapt to changes, and thrive in fast-paced deadline-driven environment - this is the job for you. This is a full-time, hourly, non-exempt position. Our core business hours are 8am - 5pm, M-F, with the opportunity for overtime. We offer growth opportunities for motivated professionals and a great compensation package. Role Sieling & Jones is seeking an Architectural CAD Drafter to develop plans, elevations, sections, and details using 2025 AutoCAD Light. You will work closely with other departments to ensure accurate drawings. Duties & Responsibilities: Prepare thorough plans, elevations, sections, and details of woodwork components & paneling for client approval and fabrication Work with an existing team to coordinate drawings and provide quality design work to client's specifications Assist Project Managers with changes and additions to drawings as needed Document, organize, and maintain project information Follow drafting schedule and adapt to changes promptly Proactively communicate product or schedule concerns with other departments Benefits 401(k) Dental insurance Employee assistance program Flexible schedule Health insurance Health savings account Life insurance Paid time off Vision insurance Requirements Skills & Requirements Experience using AutoCAD to produce detailed shop drawings or architectural drawings (including layout experience) Proficiency with MS Office A keen eye for detail and the ability to visualize and understand 3-D dimensions Ability to communicate professionally via phone and email with internal and external clients Ability to multitask and prioritize Ability to work in a team environment as well as independently Cabinetry and woodworking knowledge is a plus. ERP experience a plus

Benefits: 401(k) matching Competitive salary Dental insurance Health insurance Paid time off Profit sharing Vision insurance Beams Millwork Millwork Drafter / Engineer Job Description Come join our team at Beams Millwork as a Millwork Drafter/Engineer About Us: At Beams Millwork, nestled in the heart of Morgantown, PA, we're renowned for our exceptional craftsmanship in architectural millwork. From residential sanctuaries to bustling commercial venues, our team elevates every space with unmatched precision and creativity. We're currently seeking a skilled and driven Millwork Drafter/Engineer to join us in turning ideas into reality. Responsibilities include: Craft detailed and precise shop drawings for customer approval. Ensure shop drawings are completed on time to meet client deadlines. Update shop drawings based on redline changes and field dimensions. Engage in hand-off meetings with Sales, Estimating, and Project Management to grasp project scope. Investigate hardware and appliance specifications to ensure accuracy. Program jobs for CNC machining with precision. Identify special or unique items and situations, offering creative solutions, Handle multiple projects simultaneously to support company goals. Update shop drawings to create accurate As-Built Drawings for project close-out. Qualifications: At least 3 - 5 years of hands-on experience with AutoCAD. Proficient with Microvellum; programming experience is a strong plus. Extensive understanding of cabinetmaking and millwork. Skilled in reading and interpreting architectural drawings. Well-versed in AWI standards. We Offer: Competitive pay Vacation time that increases with tenure Comprehensive health benefits and retirement plan options

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + BA/BS/BFA in technical theater, engineering, architecture, industrial design, product design and 4+ years of experience working in a related technical field **OR** 7+ years of design experience in live entertainment technology or adjacent field + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AB TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

WHO WE ARE Kinsley Construction is a full-service construction company committed to doing right by our people, right by our roots, and right by you. Operating throughout the Mid-Atlantic Region, we serve clients in a variety of industries. From Building, Civil, and Industrial construction, we do what it takes to get the job done and done right. If you want to leave your mark, take pride in what you do each day, and create something to show off to your family - then join ours. WHY KINSLEY CONSTRUCTION? Competitive salary and benefits package; including Single and Family Medical Insurance/Dental/Vision, Short/Long Term Disability, Life Insurance, 401K Plan with company match, (9) paid holidays, and up to (20) days PTO. Opportunities for career advancement and professional development. A collaborative and inclusive work environment. A company committed to safety, quality, and integrity in all projects. The chance to be part of a respected construction company with a long history of excellence. SUMMARY OF POSITION We are seeking an experienced Industrial Detailer/Drafter to join our growing team in York, PA. The Detailer/Drafter is responsible for generating detailed shop drawings for structural steel, miscellaneous metals, plate weldments and mechanical components as needed for our heavy industrial market sector. The ideal candidate will have a minimum of 3 to 5 years of experience and must be willing and capable of working in a collaborative setting with the fabrication team. A successful candidate should possess an Engineering degree, a CAD Technology degree or background with applicable drafting experience, strong computer skills, good communication skills and a willingness to learn. TYPICAL RESPONSIBILITIES/ESSENTIAL FUNCTIONS Read and interpret complex construction and mechanical documents and drawings. Receive project drawings and develop detailed fabrication and erection drawings for approval. Develop and respond to RFI's as needed during detailing phases. Interact with project management staff and shop foreman to develop details to optimize both shop and field productivity. Compile review comments and issue for fabrication drawings. Must have strong mechanical aptitude for reverse engineering. Must be self-motivated and able to work independently. Excellent communication and time management skills. Extreme attention to detail and experience with tight deadlines. REQUIREMENTS Technical Education certificate or Associate Degree in CAD or related Engineering field. 3-5 years of experience as a structural and misc. metals detailer. Knowledge of AISC Standards and Industrial codes and symbols. Must be familiar with 3D modeling and detailing software. Proficiency in Microsoft Office Suite is required. Knowledge of industrial processes and material handling equipment is preferred. HOW TO APPLY If you are interested in a position at Kinsley Construction, please apply on our website at **************************************** or mail, fax, or email a resume including salary requirements to: KINSLEY CONSTRUCTION, LLC. PO BOX 2886 YORK PA 17405 ************ (Fax) ******************************* WE ARE AN EQUAL OPPORTUNITY EMPLOYER

Job Description The Product Design Engineer is responsible for leading the product development and design of the Kinsey Brands Division. The areas of responsible will be bringing new projects to market through design, managing product development cycle, supplier coordination, and product testing. The Product Design Engineer will work closely with internal and global manufacturing resources to design reliable, cost-effective concepts. Position Attributes Planning & organization Verbal & written communication Self-motivation, dedication & discipline Leadership through design & engineering Proficient in design software (such as CAD, Adobe Creative Suite, etc.) Principal Duties & Responsibilities Design & engineer innovative, breakthrough concepts & products for soft goods that provide a business ROI. Brainstorm & create innovative, breakthrough concepts for hard goods through supplier project development. Product validation & functionality testing Prototype & test concept designs & initial engineering results Develop manufacturing efficiencies to reduce cost and increase product related functionality Procure required products, subassemblies & manufacturing materials Monitor competing brands & category-wide trends Expectations Execute projects on time, hitting milestones throughout the product development cycle. Compensate for global communication, design & procurement dynamics Operate under Non-Disclosure Agreement Job Posted by ApplicantPro

The Product Design Engineer is responsible for leading the product development and design of the Kinsey Brands Division. The areas of responsible will be bringing new projects to market through design, managing product development cycle, supplier coordination, and product testing. The Product Design Engineer will work closely with internal and global manufacturing resources to design reliable, cost-effective concepts. Position Attributes Planning & organization Verbal & written communication Self-motivation, dedication & discipline Leadership through design & engineering Proficient in design software (such as CAD, Adobe Creative Suite, etc.) Principal Duties & Responsibilities Design & engineer innovative, breakthrough concepts & products for soft goods that provide a business ROI. Brainstorm & create innovative, breakthrough concepts for hard goods through supplier project development. Product validation & functionality testing Prototype & test concept designs & initial engineering results Develop manufacturing efficiencies to reduce cost and increase product related functionality Procure required products, subassemblies & manufacturing materials Monitor competing brands & category-wide trends Expectations Execute projects on time, hitting milestones throughout the product development cycle. Compensate for global communication, design & procurement dynamics Operate under Non-Disclosure Agreement

About the Role: The Mechanical Design Engineer plays a vital role in creating, developing, and optimizing mechanical tooling and systems that enhance manufacturing quality and efficiency. This position involves designing custom tools, fixtures, and components using advanced 3D CAD modeling, while collaborating with engineering, production, and quality teams to support new product launches and continuous improvement initiatives. The ideal candidate combines strong technical design expertise with practical problem-solving skills and a focus on precision, safety, and performance. Responsibilities: Design and develop mechanical tools, fixtures, jigs, and gauges to support production and assembly operations. Generate 3D CAD models and detailed drawings to ensure accuracy, manufacturability, and compliance with design standards. Support new product introductions through concept design, feasibility studies, and design validation. Collaborate with cross-functional teams to resolve design, quality, and process challenges. Manage tooling and design projects from concept through implementation, including cost estimates and sourcing coordination. Apply GD&T principles to ensure dimensional accuracy and repeatability in manufactured components. Conduct root cause analysis and apply problem-solving tools such as 8D, fishbone, and statistical analysis. Maintain design documentation and ensure compliance with internal quality management systems (QMS). Participate in design and process improvement initiatives leveraging Lean and Six Sigma methodologies. Promote workplace organization, safety, and adherence to 5S standards. Qualifications: Bachelors degree in Mechanical Engineering or a related technical discipline. 2 or more years of experience in mechanical design, tooling, or process engineering. Proficiency with 3D CAD software such as SolidWorks or equivalent. Strong understanding of mechanical systems, metal forming, and tool and die design principles. Ability to read and interpret engineering drawings and apply GD&T standards. Experience with inspection tools, measurement systems, and quality documentation. Strong project management and communication skills. Familiarity with manufacturing processes, process improvement, and cost estimation. High attention to detail, organization, and accuracy in design documentation. Desired Qualifications: Experience designing production tooling such as stamping dies, welding fixtures, and inspection gauges. Knowledge of PFMEA, process validation, and quality system requirements. Exposure to Lean Manufacturing, Six Sigma, or continuous improvement programs. Familiarity with procurement and vendor coordination for custom tooling and components. Strong interpersonal skills and the ability to collaborate effectively with technical and non-technical teams. Package Details Bonus' 401(k) 401(k) matching Dental insurance Health insurance Life insurance Paid time off Vision insurance

Cannonball Recruiting is seeking a highly motivated Designer to join the team of professionals at a manufacturing facility for the food and beverage industry in York, Pennsylvania. This position will be responsible for the design of electrical and electro-mechanical assemblies for high speed automation, including robotics. The right candidate will provide support to our engineering department through innovative ideas. Requirements: 2-year associates degree (A.S.) in Electrical Engineering or 5 years progressive experience Proficiency with a 2D drafting package: AutoCAD, AutoCAD Electrical, Autodesk Vault a plus Proficiency with Microsoft Word, Microsoft Excel and Microsoft Outlook Knowledge of basic electrical system design and components such as contractors, fuses, relays, terminal blocks and transformers Capable of independently solving problems and bringing the problems to resolution Knowledge of various types of electrical components and assemblies such as VFD's, PLC's and Sensors Well organized and detail oriented Must be able to work in a team environment Must effectively communicate with employees, vendors and clients Knowledge of basic electrical engineering principles a plus Limited travel required for site evaluations Position may require applicant to come in contact with raw and processed food/beverages including red meat/pork, gluten, nuts and seeds, eggs, flour, milk, yeast and alcohol UL 508A MTR certification or willing to obtain Job Duties: Design and detail of equipment electrical parts and systems Design of panel layouts and interconnection diagrams Support research and development of new equipment through imagination and original ideas Create economical assemblies with safety and durability as the key ingredients Interpret and integrate electrical drawings/models from clients and vendors Detailing (drafting) of equipment electrical parts and systems Detailing (drafting) of panel layouts and interconnection diagrams Purchase components associated with projects Support electrical department change requests Interact with vendors to determine application of technology updates Troubleshoot equipment issues during shop assembly Benefits: Healthcare/Dental/Vision Plans Company Paid Life Insurance Voluntary Supplemental Life insurance - (employee and dependents) 401(k) Savings Plan Education Reimbursement Program Paid Holidays

Mechanical Design Engineer Industry: Manufacturing / Industrial Equipment Employment Type: Full-Time We are seeking a skilled Mechanical Design Engineer with strong experience in pressure vessel design and in-depth knowledge of ASME Boiler and Pressure Vessel Code (BPVC). This role is responsible for designing, analyzing, and supporting the manufacture of pressure-containing equipment used in industrial applications. The ideal candidate will collaborate closely with engineering, manufacturing, quality, and compliance teams to deliver safe, code-compliant, and cost-effective designs. Key Responsibilities Design and develop mechanical components and systems with a focus on pressure vessels and pressure-retaining equipment. Apply ASME BPVC (Section VIII) and other applicable codes and standards to ensure compliance and safety. Perform engineering calculations including stress analysis, pressure calculations, and material selection. Create and review detailed engineering drawings, specifications, and bills of materials. Support fabrication, testing, inspection, and documentation required for code compliance. Collaborate with manufacturing teams to resolve design, fabrication, and assembly issues. Participate in design reviews, hazard analyses, and continuous improvement initiatives. Interface with quality, regulatory, and third-party inspection agencies as required. Support troubleshooting, root cause analysis, and field or production issues related to pressure equipment. Required Qualifications Bachelor's degree in Mechanical Engineering or related engineering discipline. Proven experience designing pressure vessels, tanks, or pressure-retaining equipment. Strong working knowledge of ASME Boiler and Pressure Vessel Code (BPVC). Experience with mechanical design tools and CAD software (e.g., SolidWorks, AutoCAD, Inventor, or similar). Ability to perform engineering calculations and interpret code requirements. Strong understanding of materials, fabrication methods, and manufacturing processes. Excellent communication and documentation skills. Preferred Qualifications Experience with ASME Section VIII, Divisions 1 and/or 2. Familiarity with pressure vessel inspection, testing, and certification processes. Experience working in regulated manufacturing environments. Knowledge of FEA or pressure vessel analysis software. Professional Engineer (PE) license or Engineer-in-Training (EIT) status. Why Join Us This role offers the opportunity to work on complex, safety-critical equipment in a collaborative engineering environment. You will play a key role in delivering high-quality, code-compliant designs while contributing to innovation, operational excellence, and continuous improvement. You should be proficient in: GD&T Bachelor's Degree Machine Building/Assembling CAD Software Tolerance Analysis Blueprint Reading Machines & technologies you'll use: CAD Software (Solidworks, AutoCAD)

Job DescriptionDescription: RETTEW is looking for an Entry-Level Structural Designer to join our Transportation Team. This is a succession role designed to help you build technical skills in bridge and structural design while learning directly from senior engineers. Over the next 2-3 years, you'll take on progressively more independent work, preparing you to grow into a key contributor in our structural practice. About RETTEW At RETTEW, we empower our people to act like owners and bring new ideas forward. As a 100% employee-owned engineering consulting firm, we specialize in planning, design, and engineering services across transportation, land development, environmental, energy, and municipal markets. Our culture is built on collaboration, innovation, and helping each other succeed. Work Environment: Hybrid schedule - three days a week in-office. Locations: Berwyn, Lancaster, Lehigh Valley, Mechanicsburg, State College, Williamsport, or Pittsburgh, PA; Akron/Canton, OH; or Morgantown, WV Position Summary / What You'll Do As a Structural Designer, you'll support the design and drafting of bridges, retaining walls, and related structural features. You'll work closely with senior staff to develop design details, maintain drawing accuracy, and ensure compliance with codes and client requirements. Responsibilities / Day-to-Day - Draft structural drawings (bridges, walls, structural members) using CAD/design software. - Develop preliminary details, materials, and reinforcement layouts. - Assist with structural calculation summaries and support documentation. - Prepare submittals and help respond to agency or client review comments. - Maintain quality and compliance of drafts with AASHTO and state/local standards. - Support revisions and updates throughout the design process. - Participate in internal peer reviews of structural drawing sets. Qualifications Required: - Associate's degree or technical certificate in structural drafting, CADD, or engineering; or equivalent experience. - Exposure to structural engineering or design (through coursework, internships, or work). - Basic competence in OpenRoads or Civil 3D, with interest in structural-specific drafting. - Detail-oriented, organized, and able to track drawing revisions. - Strong communication skills with openness to feedback. Preferred: - Familiarity with structural codes and standards (AASHTO, state DOTs). - Interest in learning analysis tools for structural design. What We Offer - Employee Stock Ownership Plan (ESOP). - Comprehensive health, dental, and vision benefits. - Paid time off, 401(k), and wellness programs. - A culture that values relationships, ownership, and excellence. RETTEW is an Equal Opportunity Employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex (including pregnancy, sexual orientation, or gender identity), national origin, age, disability, veteran status, genetic information, or any other characteristic protected by applicable law. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, please contact us at ******************* to request assistance. #LI-Hybrid Requirements: Requirements listed above.

The Digital team exists to serve LCBC's Ministries by developing technology solutions that help support and move our mission forward while creating visually engaging and effective digital experiences that provide value to our Attendees. The Product Designer is responsible for creating innovative and effective design solutions for LCBC's digital channels including: Websites, micro-sites, Mobile Apps, email campaigns, and TV Apps. At LCBC (Lives Changed By Christ), we're on a mission to introduce people to Jesus and together fully follow him. For more than 30 years, this mission has guided us daily as we work with one eye on eternity, work with excellence, and bring our best in everything we do, knowing that this honors God. We also believe that who you are becoming is more important than what you do, so we want to help you grow deeper in your faith, closer in your relationships, and excel professionally. We are one church with multiple locations throughout Pennsylvania, and we're growing! You'll Contribute to Life Change By: Driving community engagement through the design of informative and inspiring digital campaigns spanning across all of LCBC's digital channels. Develop and champion digital design standards based on goals outlined by Digital Director. Design digital graphics for various onscreen display mediums including Desktop, Mobile devices, and OTT TV Apps. Develop flexible, intuitive CMS templates that can be utilized by non-technical staff. Skills Needed to Succeed: Proficient in Adobe Photoshop, Adobe Illustrator, Figma and other design tools. Proficient in HTML and CSS. Excellent in online content presentation, layout, and information design. highly skilled in web-based information architecture and user-centered design methods. Knowledgeable about industry standard best practices. Exceptional ability to develop user experience (UX) and translate wireframes and designs into code. Passionate and comfortable working in a highly collaborative, team-based environment. Strong understanding of mobile design and responsive design methods and best practices. Self-starter that's capable of juggling multiple projects simultaneously. Experience with Expression Engine, Craft, WordPress or other PHP-based CMS. Adept in JavaScript or jQuery, and other front-end technologies. Experience working with clients and coaching around design systems and solutions. 3+ years of experience in Web design, UI/UX Design, or similar field. Strong design portfolio demonstrating UI/UX experience, as well as responsive, mobile-first, and user-centric design principles. Benefits We Offer: Competitive medical, dental and vision coverage Retirement plan contribution and employer match Annual counseling benefit Flexible schedules Generous and immediate paid time-off Casual dress Quarterly professional and spiritual development days Intentional investment in personal and professional development Personal Qualifications: Can articulate an identifiable salvation experience and lives out a pattern of spiritual development and regular attendance and participation at LCBC. Supports LCBC's mission, priorities, philosophy of ministry, and doctrinal statement. Supports LCBC's core values: we run after the one; we pursue excellence; we prioritize relationships; we deploy people for impact; we are real and relatable. Displays a winning attitude and a spirit of cooperation; communicates truth with grace; prays about everything; and has a willingness to serve on a team. Shows a desire to grow, develop, and mature, both spiritually and professionally. Exhibits pride in the image of LCBC as it reflects on the image of Christ portrayed to attendees, staff, and guests. Be an LCBC Partner or willing to become a Partner within 60 days of employment. Join our team and see how God can use you to help create environments where lives can be changed by Christ. You'll get a front-row view of the work God is doing at our church and play a role in introducing people to Jesus and together fully following him.

TAIT partners with artists, brands, IP holders and place makers to bring culture-defining, never-before-seen experiences to life. With a legacy of innovation spanning over 45 years, TAIT has grown from pioneering in rock 'n' roll concert staging to setting the global standard for extraordinary live events and experiences through cutting-edge technology, precision engineering, and creative design. TAIT's 20 global offices have developed iconic productions and experiences in over 30 countries, all seven continents, and even outer space for renowned performers, theme parks, exhibits, and venues across the globe, including partnerships with Taylor Swift, Cirque Du Soleil, Royal Opera House, Nike, NASA, Bloomberg, Google, Beyoncé, and The Olympics **Position Purpose** Mechanical Design Engineers (MDE) at TAIT are responsible for project-based mechanical design work that focuses on specialized machinery, structures, and rigging systems for the entertainment technology industry. MDEs drive innovative technical solutions, while working within TAIT safety and quality processes, as well as leveraging TAIT standard design principles and practices. As part of the wider mechanical design and engineering team, this role will focus on owning specific subsections of projects, which we call elements. This role is a bridge between associate/entry-level roles (which focus on part-level drawings) and senior/experienced roles (which focus on project-level solutions). The MDE team collaborates across departments (project management, fabrication, procurement, field teams) to ensure project success, from "initial concept" through "opening night." **Essential Responsibilities / Accountabilities** + Collaborate with project teams to develop innovative and effective technical solutions that align with project objectives and exceed client expectations. + Plan and execute technical solutions to work within scope, schedule, and budget. + Apply TAIT design best practices to design for fit and finish, manufacturing efficiency, onsite assembly + disassembly, and packaging. + Identify and understand the underlying physics of complex problems to create successful technical solutions. + Identify and prioritize project specific requirements and constraints to drive technical solutions. + Apply TAIT Project Delivery best practices and processes including design reviews, project team meetings, use of planning systems/software, + Participate in client meetings and produce client-facing drawing packages as needed. + Communicate effectively through hand sketches, 2D CAD drawings and cross sections. + Efficiently generate robust and clean 3D models to support TAIT's collaborative design process. + Produce pitch studies, schematics, storyboards, weight studies, and other supporting tasks to advance the design + engineering process. + Identify appropriate timing and scale of prototyping to support design + engineering process. + Recognize aspects of project work requiring engineering rigor to collaborate with internal and external engineering review on assigned project work. + Identify long lead time items and work with purchasing department to procure project specific components and materials. + Use custom TAIT CAD tools as appropriate in design and detailing processes. + Maintain project documentation including drawing redlines and operation manuals as required. + Release assembly and part drawings to be manufactured internal to TAIT as well as through subcontracting vendors using appropriate dimensioning and tolerancing. + Efficiently solve technical issues as they may arise during fabrication, testing, and/or commissioning. + Support legacy TAIT equipment as required by project needs and/or support department requests. + Maintain awareness of standard of solutions within TAIT's markets, product lines, and platforms. + Maintain awareness of TAIT's markets and competition. To perform this position successfully, each essential responsibility/accountability must be fulfilled satisfactorily. Reasonable accommodation may be made to enable an individual with disabilities to perform the responsibilities and accountabilities outlined above. Other duties may be assigned to meet business needs. **Minimum Qualifications** + Formal degree in Technical Theater, Engineering, Architectural, Industrial Design, Machine Design, CADD preferred, or High School Diploma/GED and equivalent work experience listed below: + Design Experience: minimum 7 years with formal degree + Design Experience: minimum 9 years without formal degree + Background in 3D CAD modeling + Working knowledge of live entertainment technology + Experience working in a short-term, project-based environment + Success collaborating as part of a cross-functional team + Ability to be based in the Lititz, PA TAIT headquarters **Preferred Experience** + Parametric modeling, ideally using Autodesk Inventor + Building information modeling (BIM) + Design for manufacture (DFM), especially aluminum structures and electro-mechanical machines + Rigging, especially theatrical rigging, arena rigging, performer flying, or catenary systems + TAIT markets, especially concert touring and theme parks + TAIT technology, especially winches, trolleys, and other overhead machinery/structures **Working Conditions and Physical Effort** The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. While performing the duties of this job, the employee is regularly required to sit and use hands to finger, handle, or feel objects, tools, or controls. The employee frequently is required to reach with hands and arms and talk or hear. Specific vision abilities required by this job include close vision, color vision, and peripheral vision. The employee regularly operates a computer, including typing, using a mouse or keyboard, and viewing the screen for extended periods. While the role does not require regular lifting or physical exertion, there may be occasional onboarding programs or training opportunities that create opportunities for more exposure to physical tasks or new environments (sites, venues, etc.) **Work conditions of the role are:** + Work conditions may involve moderate exposure to unusual elements such as dirt, dust, fumes, unpleasant odors, and/or loud noises. + Work environment involves some exposure to hazards or physical risks which require following basic safety precautions. + Must be able to wear and properly utilize appropriate personal protective equipment (PPE) to work within or visit areas where required. This includes safety glasses, reflective vest, ear plugs, safety toed shoes, and other PPE as required by the location. \#LI-AW1 TAIT is an equal opportunity employer fully committed to diversity and inclusion in the workplace. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability, or status as a protected veteran or any other protected characteristic as outlined by international, national, state, or local laws.

Cannonball Recruiting is seeking a highly motivated Designer to join the team of professionals at a manufacturing facility for the food and beverage industry in York, Pennsylvania. This position will be responsible for the design of electrical and electro-mechanical assemblies for high speed automation, including robotics. The right candidate will provide support to our engineering department through innovative ideas. Requirements: 2-year associates degree (A.S.) in Electrical Engineering or 5 years progressive experience Proficiency with a 2D drafting package: AutoCAD, AutoCAD Electrical, Autodesk Vault a plus Proficiency with Microsoft Word, Microsoft Excel and Microsoft Outlook Knowledge of basic electrical system design and components such as contractors, fuses, relays, terminal blocks and transformers Capable of independently solving problems and bringing the problems to resolution Knowledge of various types of electrical components and assemblies such as VFD's, PLC's and Sensors Well organized and detail oriented Must be able to work in a team environment Must effectively communicate with employees, vendors and clients Knowledge of basic electrical engineering principles a plus Limited travel required for site evaluations Position may require applicant to come in contact with raw and processed food/beverages including red meat/pork, gluten, nuts and seeds, eggs, flour, milk, yeast and alcohol UL 508A MTR certification or willing to obtain Job Duties: Design and detail of equipment electrical parts and systems Design of panel layouts and interconnection diagrams Support research and development of new equipment through imagination and original ideas Create economical assemblies with safety and durability as the key ingredients Interpret and integrate electrical drawings/models from clients and vendors Detailing (drafting) of equipment electrical parts and systems Detailing (drafting) of panel layouts and interconnection diagrams Purchase components associated with projects Support electrical department change requests Interact with vendors to determine application of technology updates Troubleshoot equipment issues during shop assembly Benefits: Healthcare/Dental/Vision Plans Company Paid Life Insurance Voluntary Supplemental Life insurance - (employee and dependents) 401(k) Savings Plan Education Reimbursement Program Paid Holidays

Job Title: Electrical DesignerJob Description The Electrical Designer will collaborate closely with Electrical Drafters, Controls Engineers, and Management to ensure that new and existing equipment, both custom and standard, is fully functional. Responsibilities + Detail electrical sensors for conveyors and equipment following company standards and guidance from engineers and management. + Produce wiring diagrams, panel and electrical assemblies, and arrangement drawings necessary for cable fabrication. + Assist in maintaining the project schedule by communicating effectively, prioritizing activities, and resolving issues as they arise. + Utilize technical skills to address design problems. + Complete assignments within the allocated timeframe with minimal supervision. + Identify purchased materials and generate purchase requisitions. Essential Skills + 2 years of electrical design experience with Allen-Bradley. + Experience with SolidWorks, school training acceptable. + Experience with AutoCAD Electrical, school training acceptable. + Proficient in Microsoft Office Products. Additional Skills & Qualifications + Associate's degree in Drafting/Engineering discipline. + Willingness to learn about food processing equipment and design, training provided. + Sanitary design knowledge or experience preferred, training provided. Work Environment The Electrical Designer will work directly under the Electrical Engineering Manager and collaborate with three peers. The role requires 20% overnight travel, rotating with the other three peers, with trips once every other month potentially lasting up to two weeks. Job Type & Location This is a Permanent position based out of York, PA. Pay and Benefits The pay range for this position is $65000.00 - $75000.00/yr. Benefits offered are as follows: - Full time position 8:00am - 5:00pm - Full insurance package, Medical, Dental, Vision, Supplemental - 8 paid company holidays - Retirement/401K Workplace Type This is a fully onsite position in York,PA. Application Deadline This position is anticipated to close on Feb 11, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.