Controls engineer jobs in Cary, NC - 454 jobs

Requires advanced knowledge of operational procedures and tools obtained through extensive work experience and may require vocational or technical education. Responsibilities typically include: working under limited supervision for non-routine situations and may be responsible for leading daily operations. Training, delegating, and reviewing the work of lower-level employees. Problems are typically difficult and non-routine but not complex. Primary Duties Diagnose and troubleshoot automation equipment, including PLCs and SCADA systems. Design and implement modifications to control systems under general guidelines or independently. Execute repairs and implement modifications to enhance safety and reduce costs. Collaborate with management to support manufacturing operations and business continuity. Conduct failure investigations and document findings for automation issues. Maintain compliance with quality systems while optimizing manufacturing processes. Conduct complex diagnostic tests and root cause analysis for system failures. Participate in planning and executing system upgrades and expansions. Make recommendations for process optimization and efficiency improvements. Perform all work in compliance with company quality procedures and standards. Perform other duties as assigned. Education High School Diploma, GED, or equivalent required. Qualifications 5+ years of experience maintaining and/or troubleshooting automated systems in a manufacturing environment. Knowledge, Skills and Abilities: Strong troubleshooting and diagnostic skills for automation systems. Ability to work under limited supervision and handle non-routine situations. Knowledge of PLCs, SCADA systems, and automation equipment. Problem-solving and root cause analysis for system failures. Ability to collaborate effectively with management and cross-functional teams. Working Conditions Ability to remain in stationary position, often standing, for prolonged periods. Ability to ascend/descend stairs, ladders, ramps, and similar structures. Ability to wear PPE correctly most of the day. Ability to operate heavy machinery. Ability to adjust or move objects up to 50 pounds in all directions. Domestic travel required: 0%. International travel required: 0%. Typical manufacturing environment with exposure to automated equipment. The estimated salary range for this role is between $38.00 and $50.00. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bio Merieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer. In addition, bio Merieux offers a competitive Total Rewards package that may include: * A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options * Company-Provided Life and Accidental Death Insurance * Short and Long-Term Disability Insurance * Retirement Plan including a generous non-discretionary employer contribution and employer match. * Adoption Assistance * Wellness Programs * Employee Assistance Program * Commuter Benefits * Various voluntary benefit offerings * Discount programs * Parental leaves #biojobs Please be aware that recruitment related scams are on the rise. Fraudulent job postings are being placed on other websites, and individuals posing as bio Merieux Talent Acquisition team members are reaching out via email or text message in an attempt to collect your personal and confidential information. In some cases, these scammers are also conducting bogus interviews prior to extending fraudulent offers of employment. Beware of individuals reaching out using general phone numbers and non-bio Merieux email domains (i.e. Hotmail.com, Gmail.com, Yahoo.com, etc.). If you are concerned that an interview experience or offer of employment might be a scam, please make sure you are searching for the posting on our careers site or contact us at [emailprotected]. BioMerieux Inc. and its affiliates are Equal Opportunity/Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Please be advised that the receipt of satisfactory responses to reference requests and the provision of satisfactory proof of an applicant's identity and legal authorization to work in the United States are required of all new hires. Any misrepresentation, falsification, or material omission may result in the failure to receive an offer, the retraction of an offer, or if already hired, dismissal. If you are a qualified individual with a disability, you may request a reasonable accommodation in BioMerieux's or its affiliates' application process by contacting us via telephone at , by email at [emailprotected], or by dialing 711 for access to Telecommunications Relay Services (TRS).

Job Description: Electrical Engineer/Designer (EED) Company and BG Description: Delta, founded in 1971, is a global provider of power and thermal management solutions. Its mission statement, "To provide innovative, clean and energy-efficient solutions for a better tomorrow," focuses on addressing key environmental issues such as global climate change. As an energy-saving solutions provider with core competencies in power electronics and automation, Delta's business categories include Power Electronics, Mobility, Automation, and Infrastructure. Position Purpose: In this Electrical Engineer/Designer role, you will design, develop, and oversee electrical systems and components to ensure they function safely, efficiently, and in accordance with specifications and regulations. The position will be responsible for designing electrical systems for building, infrastructure, machines, or products, ensuring the functionality, safety and compliance, and developing layouts schematics, specifications, and bill of materials for power distribution and control systems. Job Objectives (How and When) Major Responsibilities/KPIs Deliverables Design & Technical Execution Complete electrical design packages for projects and/or products Maintain compliance with relevant industry standards and client specifications Minimal design-related change orders Project Management & Delivery Deliver all assigned electrical design milestones on or ahead of schedule Maintain minimal budget deviation on electrical design hours Cross-functional Collaboration Lead/participate in ensuring design alignment with architectural, structural, and mechanical systems Improve cross-discipline coordination by developing and implementing a standardized electrical design checklist Professional Development Continued education in electrical engineering topics and standards Obtain/maintain electrical certifications Mentor others in core electrical design methodologies Innovation & Process Improvement Identify and implement software, tools, and/or workflow that improves role efficiency Standardize on designs by creating reuse templates Key Competencies: Electrical Design Proficiency Strong understanding of power distribution, lighting, grounding, panel schedules, and control systems. Skilled in CAD/BIM software (AutoCAD, Revit, EPLAN, etc.). Proficient in performing load calculations, voltage drop, short circuit, and coordination studies. Code Compliance & Safety Deep knowledge of NEC, IEEE, IEC, NFPA, and local building codes. Designs systems that prioritize safety, reliability, and code adherence. Project Management Capable of managing design timelines, budgets, and deliverables. Prioritizes tasks, meets milestones, and communicates progress effectively. Technical Documentation Produces clear, detailed, and accurate construction documents, specifications, and reports. Ensures documentation supports permitting, installation, and inspection processes. Key Behaviors: Detail-Oriented Reviews designs thoroughly to prevent errors and minimize rework. Checks for consistency and constructability in electrical layouts. Collaborative Works effectively with cross-disciplinary teams (mechanical, architectural, civil). Accepts feedback and coordinates to avoid design conflicts. Analytical Thinking Diagnoses problems logically and develops engineering solutions. Uses data and simulation tools to support design decisions. Adaptability Responds effectively to changing project requirements or new technologies. Embraces continuous learning and process improvement. Core Strengths: Problem Solving Quickly identifies and resolves design, installation, or system integration challenges. Communication Skills Explains complex technical details to non-engineers (e.g., clients, stakeholders). Writes clear reports and presents confidently in meetings. Time Management Balances multiple projects and deadlines without sacrificing quality. Innovation Implements new design methods or tools to improve efficiency and sustainability. Duties/Responsibilities: Electrical System Design Design power distribution, data, and other low-voltage systems. Develop single-line diagrams, panel schedules, wiring diagrams, and load calculations. Select electrical equipment and components based on technical and cost considerations. Construction Documentation Prepare detailed electrical construction drawings using AutoCAD or similar software. Create technical specifications and scopes of work for bidding and construction. Ensure designs comply with local/industrial codes (NEC, NFPA, IEEE, IEC, UL508A) and project standards. Project Coordination Coordinate with other disciplines (mechanical, structural, architectural) to avoid conflicts. Attend design and project meetings, providing input on electrical aspects. Respond to Requests for Information (RFIs), submittals, and shop drawing reviews during construction. Site Visits and Inspections Conduct site assessments to gather existing conditions and verify installations. Perform construction inspections to ensure compliance with design intent. Support commissioning and troubleshooting of electrical systems. Code Compliance and Quality Assurance Stay current with updates to electrical codes, safety regulations, and industry standards. Review and validate electrical designs for quality, functionality, and constructability. Project and Team Support Assist in developing project schedules and estimating design time and costs. Support engineers in preparing reports, technical memos, and client presentations. Mentor junior staff or designers and provide peer reviews. Sustainability and Innovation Integrate energy-efficient and sustainable design practices. Research and propose new materials, technologies, or approaches that improve performance and reduce costs. Qualifications: Education & Certifications Bachelor's degree in Electrical Engineering or a related field and/or Associate degree or technical diploma in electrical design or drafting Engineer-in-Training (EIT) or FE certification (optional). Professional Engineer (PE) license (optional). Technical Skills & Software Proficiency Proficiency in AutoCAD, Revit MEP, and/or EPLAN for electrical drafting and modeling. Strong grasp of National Electrical Code (NEC) and relevant standards (e.g., IEEE, NFPA, IEC) and/or industrial panel standards (UL508A). Understanding of low-voltage systems, grounding, circuit protection, and control systems. Experience 0-2 years for entry-level or junior designer roles. 3-7 years for mid-level or project engineer/designer roles. 8+ years for senior engineer/designer or lead roles Soft Skills & Attributes Strong communication skills - written and verbal. Excellent attention to detail and quality assurance. Ability to manage time and meet deadlines across multiple projects. Team-oriented with good coordination and collaboration skills. Problem-solving mindset with a focus on practical, buildable solutions.

Accentuate Staffing has partnered with a global life sciences manufacturing organization to support the hiring of an Electrical & Instrumentation Engineer. This role plays a critical part in delivering capital projects that support regulated production operations, reliability, and long-term site growth within a compliance-driven environment. The ideal candidate brings strong electrical and instrumentation engineering experience within complex industrial facilities and enjoys working across the full project lifecycle. This position requires hands-on technical execution, cross-functional coordination, and direct involvement in construction, commissioning, and startup activities while maintaining strict adherence to quality and regulatory expectations. Responsibilities: Lead electrical and instrumentation engineering activities across capital projects, managing assigned scope, schedule, and cost Design and review low-voltage power distribution, motor control systems, single-line diagrams, and control schematics Specify, select, and size instrumentation, control hardware, and electrical components in alignment with P&IDs and site standards Develop equipment specifications, bid packages, vendor evaluations, and support factory acceptance testing Provide on-site construction support, contractor coordination, technical clarification, and field supervision Execute equipment startup, commissioning protocols, documentation turnover, and ensure compliance with regulated manufacturing requirements Requirements: Bachelor's degree in Electrical Engineering or a related engineering discipline 5+ years (Staff level) or 8+ years (Principal level) of relevant engineering experience in pharmaceutical, biotech, chemical, or regulated manufacturing environments Strong working knowledge of low-voltage electrical systems, motor control, instrumentation, and NFPA 70 requirements Experience supporting capital projects through design, construction, startup, and commissioning phases Familiarity with GMP/GxP environments, including change control, validation, and quality oversight Professional Engineer license preferred; ability to support occasional international travel

Job Title: Controls EngineerJob Description We are seeking a highly skilled Controls Engineer to support the development of control functions and parameters for eDrive and AWD systems. This role is perfect for someone passionate about engineering innovation, data-driven decision-making, and continuous improvement. Responsibilities * Design and validate engineering solutions through feasibility testing and implementation. * Draft and evaluate engineering standards and specifications. * Conduct data analysis to identify trends and support solution development. * Design test procedures based on product specifications. * Participate in ongoing training and capability development. * Ensure compliance with health, safety, and environmental standards. * Collaborate cross-functionally to troubleshoot and optimize system performance. * Manage requirements traceability and verification throughout the project lifecycle. Essential Skills * Bachelor's degree in Engineering or equivalent. * 3-5 years of relevant experience in engineering systems or controls. * Strong analytical and problem-solving skills. * Ability to work independently and provide technical guidance. * Familiarity with engineering development tools, testing protocols, and specification writing. * Excellent communication and collaboration skills. Additional Skills & Qualifications * Experience with PLC programming and automation. * Proficiency in troubleshooting, robotics, and controls engineering. * Knowledge of Allen Bradley and Siemens PLCs. * Experience with electrical engineering and HMI systems. Work Environment The work environment involves spending over 50% of time on the floor, engaging in hands-on activities. Job Type & Location This is a Permanent position based out of Mebane, NC. Pay and Benefits The pay range for this position is $95000.00 - $115000.00/yr. Our Values in Action At GKN, we value: • Ingenuity: Complex problem-solving, innovative thinking, and continuous improvement • Collaboration: Building strong relationships and working toward shared goals • Principled Leadership: Accountability, integrity, and clear communication • Drive: Prioritizing effectively and delivering results under pressure Workplace Type This is a fully onsite position in Mebane,NC. Application Deadline This position is anticipated to close on Jan 22, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com for other accommodation options.

**Power your future with Qualus as a Protection & Control Engineer through our Qualus University's 2026 Engineering Boot Camp!** Our Engineering Boot Camp is a full-time Engineer I role paired with a structured training and development program built to accelerate your growth in the power industry. As a Boot Camp Engineer, you'll dive into focused classroom instruction led by seasoned Qualus engineers and industry experts, participate in immersive site visits, and gain hands-on substation safety and equipment training. You'll also receive guided preparation for the FE exam to help you build a strong technical foundation from day one. Whether you're drawn to Protection & Controls, Power System Studies, Substation Engineering, or Relay Settings, our four track options give you the runway to grow in the direction that excites you most. If you're ready to build real expertise, make real impact, and start a career with long-term potential, this is your first step. Apply today and join a program designed to turn early-career engineers into industry-ready professionals. **As a Protection & Control Engineer,** you will play a crucial role in the design and development of utility substation Protection & Control (P&C) engineering design packages that include drawings such as one-line diagrams, three-line diagrams, wiring diagrams, AC/DC Elementary diagrams, circuit schedules, logic diagrams, operating diagrams, and more. The 2026 Engineering Boot Camp, powered by Qualus University, will be starting July 2026. As a program participant, you will receive an offer to be a full-time employee with Qualus. **Responsibilities** + Coordinate with Substation Design Engineers, Relay Settings Engineers, and other groups to ensure design concurrence. + Development of complete engineering design packages for protective relaying and communication systems, including one-line diagrams, three-line diagrams, AC/DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials. + Working on project teams supporting all quality and project management goals. + Meeting all project deadlines and supporting the processes and procedures to meet deadlines. + Maintaining up-to-date technical skills related to the design of electrical substations and protection and control schematics for the electric utility power grid through on-the-job work and formal training. + Substation awareness and Safety consciousness. + Aptitude to quickly learn and apply test procedures for various types of substation equipment. + Good PC skills and the ability to support testing activities as required by the project lead. + Develop drawings and assist in the preparation of design packages using CAD/drafting skills. + Preparing additional support documentation as needed to assist procurement, construction, and operation/maintenance of systems being designed. + Consistently following established design standards and CAD drafting standards while assuring quality, accuracy, and completeness. + Identifying process improvement ideas and commuting ideas through appropriate management channels. **Qualifications** + BS Degree in Electrical Engineering from an ABET-accredited school with a focus on power systems. + Ability to travel up to 10% of the time. + Microsoft Office product application. + Knowledge of AutoCAD and/or MicroStation. + Educational experience directly related to working with [medium to high voltage] electricity (preferred). + Must have the ability to work independently, and accurately, and have high attention to detail. + Strong communication skills and the ability to effectively discuss technical recommendations with customers. + Strong computer skills. \#LI-BL1 **Benefits & Compensation** Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited toeducation, qualifications, prior relevant work experience and work location. **Company Overview** Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. **EEO** At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************. Submit Referral Submit Referral **Job Locations** _US-NC-Raleigh_ **ID** _2025-4517_ **Category** _Engineering & Advisory_ **Position Type** _Regular Full Time_ **Remote:** _No_

Power your future with Qualus in our Substation Protection and Control department as a Protection & Control Engineer. As a Protection & Control Engineer, you will play a crucial role in the design and development of utility substation Protection & Control (P&C) engineering design packages that include drawings such as one-line diagrams, three-line diagrams, wiring diagrams, AC/DC Elementary diagrams, circuit schedules, logic diagrams, operating diagrams, and more. Responsibilities * Coordinate with Substation Physical Engineering, Relay Settings, and other groups to ensure design concurrence. * Development of complete engineering design packages for protective relaying and communications systems, including one-line diagrams, three-line diagrams, AC schematics, DC schematics, logic and functional diagrams, panel layouts, control house layouts, wiring/connection diagrams, interconnection diagrams, relaying equipment specifications and bill of materials. * Development of SCADA packages, including input / output list (Point Data Sheet) * Provides technical direction and on-the-job training to drafters, engineering technicians, and less experienced engineers. * Maintaining trusted relationships with current or prospective clients. * Confidently and comfortably present technical solutions to key customers; respond in real time to technical concerns and answer questions in a knowledgeable articulate manner. * Participate in client meetings/job site visits to collect or deliver design and engineering data. * Performs assignments independently with instruction as to the general results expected and with guidance from Manager of Engineering and/or Lead Engineer on unusual or complex projects. Qualifications * Bachelor's Degree in Electrical Engineer (BSEE) with a power systems focus. An MS Degree in engineering will be considered in lieu of the BS Engineering degree. International Engineering Degrees will be considered. * 3+ years of experience with developing complete utility substation P&C engineering design packages, including AC one-line and three-line diagrams, DC schematics, logic and functional diagrams, panel layouts, interconnection diagrams, relaying equipment specifications and bill of materials * Fundamentals of Engineering (FE) License, and desire to pursue Professional Engineer (PE) License * Physical design experience in addition to Protection & Control (P&C) experience is a plus ! * Desire for continuing education and licenses #LI-JT1 Benefits & Compensation Qualus benefits offered include Medical, Dental, Vision, Life Insurance, Short and Long-Term Disability, 401(k) match, Flexible Spending Accounts, EAP, Parental Leave, Paid time off, and Holidays, for those who qualify. The expected compensation range for this position is based upon several factors, including but not limited to education, qualifications, prior relevant work experience and work location. Company Overview Qualus is a leading pure-play power solutions firm and innovator at the forefront of power infrastructure transformation, with differentiated capabilities across grid modernization, resiliency, security, and sustainability. The firm partners with utilities, commercial, industrial, data center, and government clients, and renewable and energy storage developers, offering comprehensive solutions through boutique and integrated advisory, planning, engineering, digital solutions, program management, and specialized field services. Qualus also provides software and technology enabled services and develops breakthrough solutions for critical power industry challenges such as distributed and variable resource integration, emergency management, and secure data exchange. The firm has over 1,800 professionals, with offices throughout the U.S. and Canada. EEO At Qualus, we believe everyone has value; and that the diversity and inclusion among our teams is what sets us apart for optimal success. We put people first because we care. To view a copy of the Qualus Equal Opportunity and Affirmative Action Policy Statement, click here. If you are an individual with a disability and require a reasonable accommodation to complete any part of the application process, or are limited in the ability or unable to access or use this online application process, and need an alternative method for applying, please email **********************.

At Sentry Equipment, a subsidiary of ProMach's Systems business, we have a longstanding reputation in the industries we serve. We offer an extensive portfolio of conveyor equipment and related container handling machinery. We specialize in integrating packaging equipment and conveying systems into cost-effective and efficient plan designs. Do we have your attention? Keep reading. Our Engineering team works closely on each piece of equipment to ensure the highest quality and innovative solutions. As a Controls Engineer, will be responsible for designing, developing, and maintaining electrical control systems for our Conveyor Systems/Automated Machines. This role requires a strong understanding of control systems, electrical engineering principles, and hands-on experience with industrial automation. Are you excited about this work? * Design and develop electrical control systems for new and existing products. * Create detailed electrical sensor layouts, help with generating electrical schematics for conveyor systems and other machines. * Program and configure PLCs, HMIs, and other control devices using Rockwell software. * Troubleshoot and resolve issues with existing control systems. * Collaborate with cross-functional teams to ensure system integration and performance. * Conduct testing and validation of control systems to ensure compliance with industry standards and regulations. What's in it for you? There's no monopoly on innovative ideas or limits to how far you can advance with our team. We offer an open, communicative environment that fosters individual initiative. We pride ourselves in being a company where people are happy and choose to build a career. In addition to growth opportunities, as a ProMach employee, you receive more than just a paycheck. Total compensation includes your salary, comprehensive medical/dental programs, as well as life insurance, a generous paid time off program, and a retirement savings plan with a company match. And because we understand the importance of feeling protected, there is no waiting period for benefits - you are eligible on your first day of employment! If this sounds like you, we want to connect! * Bachelor of Science in Controls or Electrical Engineering preferred * Five (5) or more year's experience in a similar or related role * Proven experience in designing and implementing electrical control systems. * Proficiency in programming PLCs (Primarily Allen-Bradley, etc.) and HMIs. * Strong knowledge of electrical schematics, wiring diagrams, and panel layouts. * Familiarity with industrial automation and control systems. * Excellent problem-solving skills and attention to detail. * Ability to work independently and as part of a team. Pro Mach, Inc. was named to the Inc. 5,000 list of the fastest growing private companies in the U.S. seven times. We continue to introduce innovative products, enter new markets, expand our global presence, and actively acquire new capabilities. We have the rewards, opportunities, and the market strength of a large organization combined with the entrepreneurial culture of a small, fast-paced company. You will enjoy the benefits of working with a growing company that competes globally with the personal touch and feel of a smaller company where you can make an impact every day. Curious about life at ProMach? Follow us on LinkedIn, Twitter, and Instagram! ProMach is an Equal Opportunity Employer. Pro Mach uses E-Verify to verify employment eligibility of all new hires to work in the United States. Pro Mach is a drug-free workplace. We will ensure that individuals with disabilities are provided reasonable accommodation to participate in the job application or interview process, to perform essential job functions, and to receive other benefits and privileges of employment. Please contact us to request accommodation. Please note that the pay ranges listed on external job boards, outside our posting details, do not accurately reflect our internal compensation ranges. #INSEN #SEN

ENTEK is a major Oregon employer and an enabler of global clean energy with headquarters in Lebanon Oregon. We are a top producer of separators for both lithium and lead acid batteries, best in class twin screw extruders and machinery for the plastics industry, and we have a full complement of engineering services to provide our customers with excellent products and services worldwide. Our success is fueled by consistently living our core values of respect, integrity, commitment, and innovation. ENTEK's commitment to non-stop innovation and attention to customer service keeps our customer's production lines humming. ENTEK is a dynamic and engaging place to work. We believe in supporting our employees, by offering paid time off, health insurance including medical, dental, and vision, 401k, and tuition reimbursement. Our teams are world-class! Stop by our website at ************* to learn more about our company and the opportunities that await you at ENTEK. Job Description Controls Engineer designs, develops, and starts up industrial control systems used for controlling equipment, and machinery. Must have experience authoring original PLC code, and be willing to travel up to 50% of the time. Qualifications Bachelor of Science (B.S.) or equivalent; or a minimum of five years related experience and/or training; or equivalent combination of education and experience. Additional Information Language skills: Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals. Ability to write routine reports and correspondence. Ability to speak effectively before groups of customers or employees of the organization. Mathematical Skills: Ability to comprehend and apply principles of advanced algebra, trigonometry. Ability to work with concepts such as limits, engineering equations. Reasoning Ability Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists. Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form. Physical Demands: The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations be made to enable individuals with disabilities to perform the essential functions. While performing the duties of this job, the employee is frequently required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms. The employee is occasionally required to talk or hear. We are an Equal Opportunity Employer. M/F/Disabled/Veteran

Job DescriptionDescription: The Controls Engineer reports to the Corrective Maintenance Group Leader and is responsible for troubleshooting and maintaining control systems, PLCs, and robotics as well as taking on and overseeing special electronics projects. Major Areas of Responsibility Troubleshooting, repairing plant equipment, and PLC Programming Taking on special projects pertaining to plant electronics Specific Responsibilities of the Job Troubleshoot, diagnose, and repair plant equipment involving checking voltages, changing out bad components, switching out gauges, as well as making camera and software adjustments Develop and design control systems for plant and automation equipment, ensuring they meet safety, quality, and efficiency standards Write, test, and debug PLC (Programmable Logic Controller) programs to control manufacturing processes, including ladder logic and structured text Create and maintain Human-Machine Interface (HMI) systems to enable operators to monitor and control equipment effectively Integrate robotic systems into the manufacturing process, programming them for material handling. Research and recommend machine control upgrades to address outdated controls Maintain accurate documentation, including schematics, manuals, and change logs, to support maintenance and future upgrades Ensure all control systems and automation equipment adhere to safety standards and regulations, taking a proactive approach to mitigate safety risks Collaborate with cross-functional teams, including production, maintenance, and quality assurance, to achieve manufacturing goals Provide training and support to operators and maintenance technicians on control systems and automation equipment operation Other projects and responsibilities as specified Standards of Performance Minimizes downtime and improves machine efficiency Sees special projects through to completion Essential Functions Proficient in English Language Ability to work independently as well as with a team PLC experience, CNC troubleshooting experience, and AC/ DC servo drive experience Walking in a manufacturing setting with multiple stairs and inclines Qualifications Education/Credentials/Certifications Bachelor's Degree in Electrical Engineering, Automation, or related field Length of Experience Minimum 1-3 years of experience troubleshooting electronic controls in a manufacturing setting Knowledge, Skills, & Abilities Proficiency in PLC programming (e.g., Allen-Bradley, Siemens), HMI development, and industrial robotics Knowledge of Siemens 1500 TIA Portal Strong understanding of control systems, automation principles, and electrical circuits. Knowledge of ABB robot electronic maintenance and programming Knowledge of automated transfer systems like gantries and conveyors Understanding of schematics and program reading Knowledgeable in a variety of machine software Ability to work independently as well as with a team PLC experience, CNC troubleshooting experience, and AC/ DC servo drive experience Knowledge of safety standards (e.g., ISO 13849, NFPA 79) and experience implementing safety measures in control systems. Familiarity with AutoCAD or other electrical design software Strong algebraic mathematical ability Understanding of standard to metric conversions Effective communication and teamwork abilities Ability to multi-task in a fast paced environment Willingness to stay up-to-date with industry trends and advancements in control engineering Excellent computer skills and proficiency in Microsoft Office Project Management skills Physical Demands and Working Conditions The physical demands described here are representative of those that must be met by any worker to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. In terms of movement, the job may require kneeling, crouching, reaching, handling, use of fingers, feeling, repetitive motions, eye/hand/foot coordination, standing, walking, frequent us of hearing and smelling to distinguish sounds and odors indicating malfunction, and occasional balancing. In terms of vision, the job may require near acuity, far acuity, depth perception, accommodation, color vision, and peripheral vision. Environmental conditions may include contact with water or other liquids, noise, atmospheric conditions, and occasional extreme heat. Hazards may include proximity to moving, mechanical parts, exposure to electrical components, working in high, exposed places, and occasional exposure to toxic or caustic chemicals. May require Medium Physical Strength Requirements:

PowerSecure is searching for a Controls Design Engineer II. The Controls Design Engineer II are to provide the electrical/controls design on product improvements for electrical/controls infrastructure of our manufactured product lines as well as coordinate site wide drawings as applicable per site/project. These design activities are to provide assurance that our equipment/sites/projects are being built and/or applied per engineering documents, manufacturing, and other required standards, such as UL and NEC. The main goal is the safety, quality, functionality, and overall conformity of our products. This position's work is generally independent and collaborative in nature. Contributes to moderately complex to complex aspects of a project. May supervise and guide lower-level Controls Designers/Control Design Engineers. Minimum Qualifications: (Education, Experience, Knowledge, and Skills): + Bachelor's degree in engineering required, electrical preferred. + 3+ years of related experience. + Ability to read and interpret documents such as: construction drawings, construction specifications, single lines, product manuals, sequence of operations, control drawings, work instructions, written directions, and markups to electrical/control drawings. + Strong analytical, communication and organizational skills with a desire for continuous improvement. + Detail-oriented, accurate, and have a positive can-do attitude. + Strong verbal and written communication and interpersonal skills, including collaborating with other teams. + Occasionally required to inspect products in-progress in manufacturing. + Occasionally assist in moving materials and equipment that weigh ~40 lbs. + Proficient with 2-D [AutoDesk] AutoCAD Electrical or equivalent software. + Knowledgeable with UL, NEC, and NFPA 79 standards. + Proficient with MS Office applications like Outlook, Word, Excel, PowerPoint etc. Job Duties and Responsibilities: + Confirm and review construction drawings. Engineer should bring concerns to EPC and/or Operations team in a timely fashion to mitigate any potential delays. + Coordinate and communicate with other engineering groups, sales, marketing, and operations. Be an active participant in project meetings including handoff, release review, and design meetings as required with the necessary stakeholders. + If made aware of long lead material, notify appropriate personnel. + Create and verify the BoM (Bill of Materials). Coordinate with the SCADA team to ensure appropriate communication components are ordered. Coordinate with the Systems team to ensure appropriate communication components are ordered. Design is responsible for setting up Vault structure (folders, items, ECOs) and coordinating with Manufacturing Support. + Review and verify the drawing packages prior to submittal and release. + Ability to design electrical circuits for LV, MV, and DC applications ensuring compliance to common design standard. + Review Powered Electrical components and drawings. Including Fire Alarm drawings and Panel Schedules. + [AutoDesk] AutoCAD Electrical, Inventor, Vault and IFS. + Work on the electrical/control systems defined in the construction documentation or product specifications for the following. + Controllers, PLC, Woodward, HMIs, Switches, Industrial PCs, etc. + House Power. Transformer, Panel Board, distribution and conduit, receptacles, lights and switches, HVAC, and switchgear heaters. Interface with switchgear controls, Engine block heaters, alternator strip heaters, Gas Train electrical needs, etc. + DC Systems. Station Battery, Racks, consoles, chargers, DC panel Boards and distribution details. + Special electrical/control needs such as Comms, gas leak detection, ventilation, fire detection and alarm interface to controls. + Develop document set; including BOM, schematics, wire/conduit schedules, and other drawing details that will ensure the safe and efficient installation of this equipment. + Identify and execute processes that reduce the overall cost to manufacture, install and operate our products. + Ensure schedules and milestone dates are achieved in the ERP system. Provide feedback to Engineering Manager if issues arise. + Prepare engineering drawings from sketches, verbal descriptions, specifications, and technical information. + Available to work 40 hours and overtime when needed. Physical Demands and Work Environment: + Occasionally assist in moving materials and equipment that weigh ~40lbs. + Primarily office environment with the exceptions of manufacturing shop visits. "The above statements are intended to describe the general nature and level of work being performed by individuals assigned to this position. They are not intended to be an exhaustive list of all responsibilities, duties, and skills required. Management reserves the right to assign or reassign duties and responsibilities at any time, based on business needs." About Us: PowerSecure, a Southern Company subsidiary, is a leading provider of innovative energy solutions to electric utilities and their industrial, institutional, and commercial customers. Join our Power Team! We invest in high-value and cost-effective benefits for our employees. Our benefits package includes: + Medical, dental, vision and life insurance coverage + Competitive pay and a matching 401 (k) plan + Vacation, Company Holidays, Paid Time Off (PTO- personal and sick days) + Flexible spending accounts/Health savings account + Wellness Incentive Programs + Employee Referral Program + Tuition Reimbursement PowerSecure is an equal opportunity employer where an applicant's qualifications are considered without regard to race, color, religion, sex, national origin, age, disability, veteran status, genetic information, sexual orientation, gender identity or expression, or any other basis prohibited by law. This position is not open to third party recruiters. Equal Opportunity Employer/Protected Veterans/Individuals with Disabilities This employer is required to notify all applicants of their rights pursuant to federal employment laws. For further information, please review the Know Your Rights (**************************** notice from the Department of Labor.Operating Company: PowerSecure

One of the East Coast's largest providers of Building Solutions continues to grow, and has an opening for a Controls Engineer to drive field execution on BAS and HVAC projects for the Raleigh Triangle region. This company is a market leader in the Southeast, providing full-service Building Solutions and Installation services to Commercial and "large market" verticals. Providing controller programming for use in project system controllers of complex hvac systems including Air Handling, Chilled Water and Hot water generation plants, and building level energy management controllers. Ensure proper system operation by coordinating with Field Technicians during project installation and project closeout. Provide Project Manager and Field Technician support for any third party commissioning of projects. Provide exceptional customer service for internal and external customers. Niagara 4 and Trane system experience a plus What will you experience? Complete trust and autonomy to lead the way you want A built-out internal team, elite resources and market reputation Buy-in from Ownership and resources at your disposal Being a part of a global Manufacturer as a subsidiary

Watch this video to learn more about Pureflow! NC Controls Engineer About Our Organization: With over 38 years of experience providing high purity water solutions, Pureflow is committed to serving clients by designing, building, installing and maintaining water purification systems in a broad range of commercial and industrial markets. We understand that a successful business needs quality employees. We are seeking highly talented and motivated candidates to join our company where people, integrity, and excellence are essential to our culture. About the Position: In the Controls Engineer role, you will design and program control systems per customer and Pureflow specifications and complete critical project documents. If you are humble, ready for challenging projects, and enjoy working in a team environment, you could be an ideal candidate. In this position, you will: * Develop controls engineering and design strategies to meet the applicable requirements * Design control systems and select components to meet required specifications on new projects * Select instrumentation to meet required specifications on new projects * Prepare project documentation relating to instrumentation and controls components, including spec sheets, design drawings, O&M manuals, and validation documents, as applicable * Develop well documented PLC programs using current programming software from Rockwell Automation and Siemens * Develop user friendly HMI applications using current programming software from Rockwell Automation and Siemens * Support ongoing system operation with troubleshooting and updates through Pureflow's Technical Service Centers * Execute special projects and other duties, as assigned * Manage time and workload to meet Company needs Job Qualifications: * BS degree in Electrical Engineering or related field, or 3 years of equivalent experience * Experience with Microsoft Office Suite, PLC ladder logic programming, HMI application development * Familiarity of industrial instrumentation and control components and systems including, but not limited to, PLC/PAC, analyzers, sensors, valves, power supplies, wiring devices, variable frequency drives, and motor control * Proficiency in these software packages is preferred: RSLogix 500, Studio 5000, FactoryTalk View Studio * Ability to read and design electrical schematics * Aptitude to troubleshoot industrial control systems * Excellent communication skills * Self-motivated, organized, and capable of staying cool under pressure from multiple ongoing projects Working Conditions: Usual in person office working conditions at Pureflow headquarters in Graham, NC. Occasional travel is required to visit a client's office, production facility or industrial/construction job site. Conditions vary at each location. Extended hours may occasionally be necessary as workloads dictate. This may include weekdays, weekends and/or holidays. Reports to: Electrical Engineering Manager Benefits: * Competitive base salary * Comprehensive Benefits: Medical, Dental, Vision, Life Insurance, Health Savings Account (with company contributions), and more * $1 for $1 401k match up to 4% * 9 Company-paid holidays * Generous personal time off that increases with tenure * Education assistance * Employee referral bonus program * Ongoing training and development by internal and external industry experts Pureflow is an equal-opportunity employer and requires background checks and post-offer pre-employment drug tests on all positions. Key words: Electrical Engineer, Controls Engineer, Instrumentation, Industrial Control Systems

The Automation Engineer provides technical support for automated manufacturing and inspection systems in a regulated environment. This role serves as a key escalation point for automation and controls issues, supports continuous operation of syringe filling and inspection equipment, and contributes to system enhancements, troubleshooting, validation, and compliance activities. Key Responsibilities Automation & Operational Support Serve as the primary escalation point for automation and equipment control issues during syringe filling, inspection engineering activities, and manufacturing operations. Rapidly respond to alarms, equipment faults, and automation-related process deviations to minimize downtime and production impact. Monitor automated system performance, trends, and logs to proactively identify reliability or control-related concerns. Collaborate with engineering peers to meet project deliverables and mitigate schedule risks. Partner with manufacturing operators to ensure safe, compliant, and efficient automated production. Troubleshooting, Controls, and Maintenance Perform first-line troubleshooting of PLCs, HMIs, servo systems, robotics, sensors, vision systems, pneumatics, and other control components. Implement minor PLC and HMI code modifications following established engineering change control procedures. Support deployment of automation updates, patches, and configuration changes. Work closely with maintenance and engineering teams on complex repairs, advanced diagnostics, and planned shutdowns. Document issues, corrective actions, and code changes in compliance with cGMP and site procedures. Automation Development & System Enhancements Assist in the development, testing, and implementation of new PLC logic, HMI screens, alarms, and control strategies. Support automation upgrades, including hardware replacements, system migrations, and new equipment integrations. Identify and recommend improvements to enhance equipment reliability, process robustness, and operational efficiency. Participate in engineering design reviews and provide automation-related technical input. Commissioning, Qualification & Validation Support commissioning activities for new or upgraded automated systems, including I/O checks, sequence testing, and functional verification. Execute qualification and validation protocols such as FAT, SAT, IQ, and OQ in collaboration with engineering and quality teams. Assist in the development of validation documentation, including test scripts, traceability matrices, and configuration records. Ensure all automation changes comply with change control, risk assessment, and documentation requirements. Compliance, Documentation & Technical Support Maintain accurate and timely automation documentation, including code revisions, configuration backups, logbooks, and CMMS records. Ensure compliance with cGMP, safety, environmental, and corporate engineering standards. Support internal and external audits, inspections, and quality investigations. Assist in training operations and maintenance personnel on updated automation systems, troubleshooting methods, and best practices. Required Qualifications Bachelor's or Associate degree in Automation Engineering, Electrical Engineering, Mechatronics, Engineering Technology, or a related discipline; or equivalent relevant experience. Strong hands-on troubleshooting experience with PLCs, HMIs, motion control systems, pneumatics, and automated inspection systems. Experience supporting automated systems in a regulated manufacturing environment (pharmaceutical, biotech, medical device, food/beverage, or similar). Ability to interpret electrical schematics, P&IDs, machine drawings, and control system documentation. Hands-on experience with Rockwell PLC and HMI platforms. Flexibility to work extended hours as required to meet operational and project objectives. Preferred Qualifications Experience with syringe filling equipment, aseptic manufacturing operations, or automated visual inspection systems. Experience with Siemens, Beckhoff, or similar PLC/HMI platforms. Knowledge of cGMP requirements, data integrity principles, and change control processes. Experience executing or developing commissioning and validation protocols. Strong communication, documentation, and cross-functional collaboration skills. Mentor Technical Group es un empleador que ofrece igualdad de oportunidades y todos los solicitantes calificados recibirán consideración para el empleo sin importar raza, color, religión, sexo, orientación sexual, identidad de género, información genética, origen nacional, estado de veterano protegido, estado de discapacidad o cualquier otro grupo protegido por ley. Mentor Technical Group is an equal opportunity employer, and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, genetic information, national origin, protected veteran status, disability status, or any other characteristic protected by law.

About the Role North Carolina Raleigh Remote vs. Office Office/Site only Company Siemens Energy, Inc. Organization Grid Technologies Business Unit Grid Solutions Full / Part time Full-time Experience Level Mid-level Professional Snapshot of Your Day As a Power Systems Studies Engineer - HVDC Control & Protection, you will work within a team of HVDC engineering and project specialists to analyze and validate system performance for interconnection projects. Your role focuses on performing detailed power system studies and developing robust control and protection strategies to ensure compliance with grid codes and industry standards. You will collaborate closely with design engineers and project managers to integrate study results into project deliverables. How You'll Make an Impact Dynamic performance studies within tender and project execution of HVDC projects; Optimizing the dynamic behavior of the HVDC converter (e.g., black-start and network restoration, grid forming controls, multi-terminal systems) according to customer and national grid code requirements Analyzing sub-synchronous torsional/control interactions and the harmonic converter impedance, as well as potential interactions between the HVDC converter and other controlled devices in the power system Developing and validating simulation models for diverse EMT simulation tools (e.g., PSCAD/EMTDC, Matlab/Simulink, EMTP-RV) Customer training in simulation models and presentation of study results to customer Continuous improvement and standardization of simulation models, study procedures and methods, processes in project execution as well as documentation of results Supporting the project management in technical discussions, participating in customer meetings, and coordinating external partners What You Bring PhD or University degree with experience in electrical power engineering industry.1 or more years of experience. Candidates with more experience can be considered for a higher level or vice-versa.Good knowledge in high voltage applications, power transmission systems, power electronics and HVDC technology.Expertise in control engineering and modeling of HVDC systems in the time domain and frequency domain.Professional user of typical power system simulation programs (e.g., PSCAD/EMTDC, Matlab/Simulink, EMTP-RV).Willing and able to travel, as needed (up to 10%) Applicants must be legally authorized for employment in the United States without need for current or future employer-sponsored work authorization. Siemens Energy employees with current visa sponsorship may be eligible for internal transfers. About the Team Grid TechnologiesOur Grid Technology division enables a reliable, sustainable, and digital grid. The power grid is the backbone of the energy transition. Siemens Energy offers a leading portfolio and solutions in HVDC transmission, grid stabilization and storage, high voltage switchgears and transformers, and digital grid technology. Who is Siemens Energy?At Siemens Energy, we are more than just an energy technology company! With ~100,000 dedicated employees in more than 90 countries, we develop the energy systems of the future, ensuring that the growing energy demand of the global community is met reliably and sustainably. The technologies created in our research departments and factories drive the energy transition and provide the base for one sixth of the world's electricity generation.Our global team is committed to making sustainable, reliable, and affordable energy a reality by pushing the boundaries of what is possible. We uphold a 150-year legacy of innovation that encourages our search for people who will support our focus on decarbonization, new technologies, and energy transformation.Find out how you can make a difference at Siemens Energy: ******************************************** RewardsCareer growth and development opportunities Supportive work culture Company paid Health and wellness benefits Paid Time Off and paid holidays 401K savings plan with company match Family building benefits & parental leave******************************************* Equal Employment Opportunity Statement Siemens Energy and Siemens Gamesa Renewable Energy is an Equal Opportunity and Affirmative Action Employer. All qualified applicants will receive consideration for employment without regard to their race, color, creed, religion, national origin, citizenship status, ancestry, sex, age, physical or mental disability unrelated to ability, marital status, family responsibilities, pregnancy, genetic information, sexual orientation, gender expression, gender identity, transgender, sex stereotyping, order of protection status, protected veteran or military status, or an unfavorable discharge from military service, and other categories protected by federal, state or local law. California Privacy Notice California residents have the right to receive additional notices about their personal information. Click here to read more.

System Engineer - Industrial Controls Essential Functions & Responsibilities: Industrial/Commercial Control Systems Engineering service for ISI customers in the local area, relating to their needs in the following areas: SCADA Systems, PLC Programming, CAD Drawings, Industrial Networking, Systems Calibration, and other duties as assigned. Support Instrument Technicians in the field with issues related to interfacing field devices to DCS & SCADA systems, special needs testing, and technical support. Work with other System Engineers to resolve backlog of projects while maintaining excellent relationships with current contract customers. Provide support for other projects within the local service area, and throughout the ISI footprint as needed. Report job activity as well as maintain detailed logs about service calls, parts, and orders. Identify opportunities for upgrades at the customer facility. Use company vehicle to travel to and from job sites while maintaining defensive driving habits that reflect upon the sterling reputation of the company. Essential Mental Functions: Strong background in electrical/electronic engineering, process instrumentation & process engineering. Self-Motivated, Self-Driven, and the ability to Self-Manage is crucial. High energy, technically competent, and resourceful; Extreme attention to detail. Strong Computer skills in the following areas: Microsoft Visual Basic and/or other basic programming software AutoCAD, AutoCAD Electrical, or other computer aided design software Understanding of networks and network structure desired Programming in multiple programming languages and scripting techniques Basic familiarity of radio-based communications and protocols Strong understanding of industrial controls and process controls including PID Loops and pump control, industrial instrument calibrations, and repairs. Analog current loops (4-20mAdc, 1-5Vdc, etc.) and the conversion process between these instrument loops and their PLC counterparts in numeric counts. Strong Electrical knowledge and a good understanding of the National Electrical Code Knowledge of required equipment, including hand tools, volt-ohm meters, power tools, and instrument loops, etc. *Note: If candidate does not possess all the above functions on hire date, On the Job Training (OJT) will be provided. Learning new functions daily is expected and a requirement for this position. Candidate must be willing to learn and willing to teach others. Essential Physical Functions/Equipment Used: Must be able to lift objects weighing up to 75lbs. Must be able to stand, kneel, and walk for long periods of time. Must be able to climb ladders and stairs. Must be available for occasional call-ins Available for overnight travel to various locations & customer sites to provide service and training based on business needs Duties performed indoors & outdoors with exposure to weather, elements, heavy equipment, earth excavation, power tools, clean room, animal and insect bite exposure, dirt and noise. Ability to travel nationally when required. Preferred Education/Experience: Bachelor's Degree in Electrical or Electronics Engineering (BSEE / BSEET / ASEE with PLC Programing) required; Master's Degree strongly preferred , namely in Electrical Engineering (MSEE/MSEET). Additional experience can be substituted for degree requirement. 1-3+ years' experience programming PLCs (Allen Bradley, Automation Direct, MOSCAD, etc.) required; Process/Flow Control experience strongly desired . 1-3+ years' experience with Computer based HMI software (Wonderware, VTSCADA, Lookout, etc.) required. Strong computer proficiency required, namely the ability to operate a variety of electronic and microcomputer instruments used to measure and control variables such as pressure, flow, temperature, and level. Clean driving record required. FCX Performance, an Applied Industrial Technologies Company, is a leading process flow control company providing technical mission critical products and services to more than 15,000 end users, OEMs, and EPC firms across a broad range of industries and markets. Founded in 1923, Applied Industrial Technologies (NYSE: AIT) is a leading value-added distributor and technical solutions provider of industrial motion, fluid power, flow control, automation technologies, and related maintenance supplies. Our leading brands, specialized services, and comprehensive knowledge serve MRO and OEM end users in virtually all industrial markets through our multi-channel capabilities that provide choice, convenience, and expertise. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity, age, disability, protected veteran status, marital status, medical condition or any other characteristic protected by law. Founded in 1923, Applied Industrial Technologies (NYSE: AIT) is a leading value-added distributor and technical solutions provider of industrial motion, fluid power, flow control, automation technologies, and related maintenance supplies. Our leading brands, specialized services, and comprehensive knowledge serve MRO and OEM end users in virtually all industrial markets through our multi-channel capabilities that provide choice, convenience, and expertise. We are an equal employment opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, national origin, ancestry, gender, sexual orientation, gender identity, age, disability, protected veteran status, marital status, medical condition or any other characteristic protected by law.

Arcadis is the world's leading company delivering sustainable design, engineering, and consultancy solutions for natural and built assets. We are more than 36,000 people, in over 70 countries, dedicated to improving quality of life. Everyone has an important role to play. With the power of many curious minds, together we can solve the world's most complex challenges and deliver more impact together. Role description: Arcadis is seeking a Electrical Engineer to join our Design & Engineering team within the North America Places group. We are looking to grow our team of skilled multi-discipline engineers and engineering consultants throughout North America. The role sits within our Places Global Business Area (GBA). We work with our clients around the world to create, support, and enhance smart, safe, and sustainable places where people live, work, learn and thrive. Places impact on the quality of people's lives through new or redeveloped Data Center, Transit Facility, Commercial and Retail, Mixed-Use Residential, Institutional/Educational, and Social Infrastructure developments. Arcadis is the second largest architectural firm in the world. Join us in our journey to become the largest engineering firm in the world by expanding our reach in the North Carolina region. In this role, you will be accountable for providing first-in-class solutions to internal and external clients through your technical expertise in electrical engineering and associated building systems. You will use your knowledge of building-level power distribution; lighting, emergency power, controls, and similar building systems in combination with an affinity for client interaction to provide sustainable, high-quality deliverables ranging from front end planning reports to issue for Construction document packages. This position has flexible working hours, and you will join a collaborative team that truly values its people. This is a key location based position. While work scopes may be located throughout the United States, we are searching for individuals in the Raleigh area to support our existing world-class Retail, Workplace, Transit and Education architectural practice. Role accountabilities: Sustainable electrical engineering expertise: Have a solid understanding of and ability to develop engineering reports, calculations, drawings, and specifications both directly and indirectly through team members Flexibility: Openness to using existing skills in related areas and comfort with doing new things Entrepreneurial Mindset: Shared ownership of opportunity pursuit, strategy creation, client relationships, attention to quality, and delivery excitement/innovation. Market Presence: Be aware of and engaged in organizations and clients in the region. Have the ability to raise and take ownership of project opportunities. Understanding of global ways of working: Soft skills to be successful within a multicultural environmental with people of differing backgrounds. Ability and flexibility to directly work with teammates throughout the globe. Up to 20% travel may be required which will include overnight stays Qualifications & Experience: Required Qualifications: 6+ or more years' relevant MEP experience within the Retail, Workplace, Transit and Education landscape Professional Engineer in North Carolina Ability to communicate both internally and externally regarding client needs/desires and technical solutions Experience working with projects that utilize Fundamental knowledge of Autodesk Platforms and other digital design tools including Autodesk Construction Cloud (ACC) or Building Information Modelling (BIM) engineered solutions Education BSc/BEng or MSc/MEng or equivalent in engineering Preferred Qualifications: Direct working experience on past projects with Arcadis (including legacy CRTKL and IBI) architects Experience in full-service consulting design firms and coordination with in-house A/E resources Adaptable to new digital tools such as AI in an effort to understand how delivery must change over the short and medium term Practical Sustainability and carbon reduction experience. Experience with urban environments implementing transformative solutions Experience with user-experience-centric-type projects requiring narrow engineering solutions Why Arcadis? We can only achieve our goals when everyone is empowered to be their best. We believe everyone's contribution matters. It's why we are pioneering a skills-based approach, where you can harness your unique experience and expertise to carve your career path and maximize the impact we can make together. You'll do meaningful work, and no matter what role, you'll be helping to deliver sustainable solutions for a more prosperous planet. Make your mark, on your career, your colleagues, your clients, your life and the world around you. Together, we can create a lasting legacy. Join Arcadis. Create a Legacy. Our Commitment to Equality, Diversity, Inclusion & Belonging We want you to be able to bring your best self to work every day which is why we take equality and inclusion seriously and hold ourselves to account for our actions. Our ambition is to be an employer of choice and provide a great place to work for all our people. We are an equal opportunity and affirmative action employer. Women, minorities, people with disabilities and veterans are strongly encouraged to apply. We are dedicated to a policy of non-discrimination in employment on any basis including race, creed, color, religion, national origin, sex, age, disability, marital status, sexual orientation, gender identity, citizenship status, disability, veteran status, or any other basis prohibited by law. Arcadis offers benefits for full time and part time positions. These benefits include medical, dental, and vision, EAP, 401K, STD, LTD, AD&D, life insurance, paid parental leave, reward & recognition program and optional benefits including wellbeing benefits, adoption assistance and tuition reimbursement. We offer nine paid holidays and 15 days PTO that accrue per year. The salary range for this position is $80,000 - $130,000. Actual salaries will vary and are based on several factors, such as experience, education, budget, internal equity, project and location. #LI-JP1

Evergreen Innovation Group, part of the DPR Family of Companies, is seeking an Electrical Project Engineer with 2-5 years of MEP experience in commercial construction. They will work on commercial projects within our core markets: Healthcare, Higher Education, Advanced Technology, Life Sciences, and Commercial. The Electrical Project Engineer will work closely with all members of the project team. Responsibilities will include but may not be limited to the following: Supervisory Responsibilities None. Duties and Responsibilities Providing construction support for MEP systems. Participation and application of EIG's Environmental Health and Safety Plan to consistently maintain injury-free environments including performing weekly safety audits. Understanding and enforcement of contracts between EIG and Subcontractors as well as EIG and DPR. Assist the Superintendent and Project Manager in the implementation of EIG's policies and the execution of the project. Organizing the duties of other Engineers, Field Office Coordinator, Project Accountant, and other assigned project staff. This includes providing direction and prioritization. Participation in trainings and company meetings to facilitate individual and company growth. Organizing and electronically archiving project files for easy access by the project team. Preparation, monitoring, and updating project schedules. Working with the Superintendent to reduce project constraints' impact on the schedule. Preparation, maintenance, and implementation of various document control entities such as daily reports, material procurement logs, submittal logs, as-builts, testing and inspection logs, RFI logs, and change order logs. Goal-oriented approach to promptly coordinate and resolve project issues within the project team (interfacing with Designers, Engineers, and Owners). Detailed knowledge of the assigned project scopes with 100% hands on approach. Distribution of new drawings, changes, approved submittals, RFI responses, and other project information to all affected parties. Preparing agendas, documents, meeting minutes, and actions for various meetings including Owner/Architect/Contractor meetings, subcontractor coordination meetings, safety meetings, and staff meetings. Monitoring testing and inspection record and reports, safety inspection and accident logs and reports, record building permit inspections and signoffs. Required Skills and Abilities We are looking for a flexible, detail-oriented team player with the ability to manage multiple tasks, produce quality work, and consistently meet deadlines. The successful candidate will possess: Grasp of mechanical and electrical engineering concepts. Excellent listening and strong communication skills. Ability to identify and resolve complex issues. Organized work approach with the ability to adapt and adjust as required to support the project's current needs. A desire to seek out and resolve construction problems / conflicts that arise during design and construction phases. Effective participation in team environment. Proficient computer skills in Microsoft Office Suite, project management software (CMiC, Prolog or similar), scheduling software (Primavera or similar), and BIM software (AutoCAD, Revit, Navisworks or similar). A strong work ethic, a “can-do” attitude, and a passion for construction. Education and Experience 2+ years of experience as a Project Engineer, preferably within EIG's core markets. Bachelor's degree in Construction Management, Civil Engineering, or related field. Physical Requirements Prolonged periods sitting at a desk and working on a computer. Travel to and from the office as well as assigned job site(s). DPR Construction is a forward-thinking, self-performing general contractor specializing in technically complex and sustainable projects for the advanced technology, life sciences, healthcare, higher education and commercial markets. Founded in 1990, DPR is a great story of entrepreneurial success as a private, employee-owned company that has grown into a multi-billion-dollar family of companies with offices around the world. Working at DPR, you'll have the chance to try new things, explore unique paths and shape your future. Here, we build opportunity together-by harnessing our talents, enabling curiosity and pursuing our collective ambition to make the best ideas happen. We are proud to be recognized as a great place to work by our talented teammates and leading news organizations like U.S. News and World Report, Forbes, Fast Company and Newsweek. Explore our open opportunities at ********************

Key Responsibilities Design and validate engineering solutions through feasibility testing and implementation Draft and evaluate engineering standards and specifications Conduct data analysis to identify trends and support solution development Design test procedures based on product specifications Participate in ongoing training and capability development Ensure compliance with health, safety, and environmental standards Collaborate cross-functionally to troubleshoot and optimize system performance Manage requirements traceability and verification throughout the project lifecycle What You Bring Bachelor's degree in Engineering or equivalent 3-5 years of relevant experience in engineering systems or controls Strong analytical and problem-solving skills Ability to work independently and provide technical guidance Familiarity with engineering development tools, testing protocols, and specification writing Excellent communication and collaboration skills Our Values in Action At GKN, we value: Ingenuity: Complex problem-solving, innovative thinking, and continuous improvement Collaboration: Building strong relationships and working toward shared goals Principled Leadership: Accountability, integrity, and clear communication Drive: Prioritizing effectively and delivering results under pressure Ready to engineer the future of mobility?

Key Responsibilities Design and validate engineering solutions through feasibility testing and implementation Draft and evaluate engineering standards and specifications Conduct data analysis to identify trends and support solution development Design test procedures based on product specifications Participate in ongoing training and capability development Ensure compliance with health, safety, and environmental standards Collaborate cross-functionally to troubleshoot and optimize system performance Manage requirements traceability and verification throughout the project lifecycle What You Bring Bachelor's degree in Engineering or equivalent 3-5 years of relevant experience in engineering systems or controls Strong analytical and problem-solving skills Ability to work independently and provide technical guidance Familiarity with engineering development tools, testing protocols, and specification writing Excellent communication and collaboration skills Our Values in Action At GKN, we value: Ingenuity: Complex problem-solving, innovative thinking, and continuous improvement Collaboration: Building strong relationships and working toward shared goals Principled Leadership: Accountability, integrity, and clear communication Drive: Prioritizing effectively and delivering results under pressure Ready to engineer the future of mobility?