Controls engineer jobs in Linton Hall, VA

We are seeking a highly skilled and detail-oriented Electrical Engineer to join our engineering team. This role is focused on the design and development of rugged, high-performance electronics used in mission-critical defense applications with a strong emphasis on PCB layout and design. Experience or interest in RF circuit and antenna design is a significant plus. The ideal candidate will bring a deep understanding of electronics design, with the ability to contribute across the full product development lifecycle-from concept and prototyping through production and sustainment. Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: 3+ years of experience in microelectronics design and development, with a strong emphasis on PCB layout and design. Proficiency in tools such as Altium Designer, Eagle, OrCAD, or similar. Solid foundation in analog/digital circuit theory and practical design. Familiarity with lab testing tools (oscilloscopes, spectrum analyzers, VNAs, etc.). Understanding of DFM/DFT/DFA best practices in a defense context. Strong organizational and communication skills, with an attention to detail. Responsibilities: Design, analyze, and validate analog, digital, and RF circuitry for embedded systems. Lead PCB layout and design for high-reliability, multi-layer boards, ensuring compliance with military standards (MIL-STD) and IPC class specifications. Integrate a wide range of sensors (IMUs, GPS, environmental, etc.) and communication modules (LTE, UHF, SATCOM, etc.) into embedded and modular systems. Develop and integrate RF front-ends and antennas for secure communications and sensor applications. Perform schematic capture, BOM generation, layout, and detailed documentation for design reviews and production. Collaborate closely with firmware, mechanical, systems, and test engineers to deliver ruggedized and SWaP-optimized solutions. Conduct signal integrity analysis, power distribution verification, and electromagnetic compatibility (EMC) assessments. Support environmental and compliance testing including EMI/EMC, shock, vibration, and thermal. Maintain design documentation and contribute to configuration management and version control. Preferred Skills and Experience: Experience with RF circuit design, including filters, LNAs, mixers, and impedance-matched networks. Knowledge of antenna design and integration for applications including GNSS, SATCOM, cellular, telemetry, etc. Experience designing low power and ultra low power embedded devices Hands-on experience with RF simulation tools such as CST, HFSS, or Keysight ADS. Familiarity with military standards (MIL-STD) related to microelectronics Background in embedded systems, microcontrollers, and interface protocols (SPI, I2C, UART, Ethernet). Experience in end-to-end lifecycle development for defense platforms. Education: Bachelor's degree in Electrical Engineering or a related field (Master's preferred) Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate's experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $85K - $155K (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we're committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverage Employee Stock Ownership Plan (ESOP) Competitive 401(k) programs Retirement and Financial Counselors Health Savings and Health Reimbursement Accounts Flexible Spending Accounts Life insurance, short- & long-term disability Continuing Education Assistance Paid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military) Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counseling Supplemental Benefit Program Why Work for SimVentions?: SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It's also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact. Get Involved in Giving Back We believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer's success. Work with Brilliant People We don't just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy additional perks like: Employee Ownership: Work with the best and help build YOUR company! Family focus: Work for a team that recognizes the importance of family time. Culture: Add to our culture of technical excellence and collaboration. Dress code: Business casual, we like to be comfortable while we work. Resources: Excellent facilities, tools, and training opportunities to grow in your field. Open communication: Work in an environment where your voice matters. Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development. Employee Appreciation: Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more. Founding Partner of the FredNats Baseball team: Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite. Food: We have a lot of food around here! FTAC

AWS Infrastructure Services owns the design, planning, delivery, and operation of all AWS global infrastructure. In other words, we're the people who keep the cloud running. We support all AWS data centers and all of the servers, storage, networking, power, and cooling equipment that ensure our customers have continual access to the innovation they rely on. We work on the most challenging problems, with thousands of variables impacting the supply chain - and we're looking for talented people who want to help. You'll join a diverse team of software, hardware, and network engineers, supply chain specialists, security experts, operations managers, and other vital roles. You'll collaborate with people across AWS to help us deliver the highest standards for safety and security while providing seemingly infinite capacity at the lowest possible cost for our customers. And you'll experience an inclusive culture that welcomes bold ideas and empowers you to own them to completion. AWS is looking for a dynamic Commissioning Engineer. It is the responsibility of all Amazonians to have alignment with our leadership principles and demonstrate these at the highest level. The responsibilities of the ACx Commissioning Engineer (CxE) include, but are not limited to, oversight and coordination of multi-discipline division of work related to design review and commissioning of Amazon critical infrastructure for new construction and special projects. The CxE is responsible for supporting vendors, contractors, and other teams involved in the construction and commissioning of various systems including medium and low voltage power systems, Generators, UPS, HVAC, Chilled Water, BMS, and EPMS systems. They shall provide multi-discipline input into the scheduling, test script development, designing, and planning of projects. In addition, the CxE will be required to develop and review electrical and mechanical component and integrated systems testing along with other commissioning documents to ensure they are compliant with the basis of design, specification, industry standards and sequence of operations. It is the CxE responsibility to ensure that all commissioning procedures follow the appropriate safety practices and policies. CxE is responsible for auditing commissioning activities continuously to ensure compliance with environmental, quality, and safety requirements. The CxE proactively communicates with the ACx Regional Manager and the ACx team to ensure that the applicable test documents are created and executed in accordance with all commissioning requirements. This individual will be responsible for comprehensive weekly reporting of status of all ongoing projects, lessons learned, and program improvements to continually improve the quality of our program. This position will include coverage of multiple inflight projects and tight schedules. Key job responsibilities Physical Requirements • Walk job sites in uneven terrain • Work at heights and from ladders • Regularly walk, use hands and fingers, reach with hands and arms, stoop, kneel, crouch or crawl • Lift and/or move up to 49 pounds; and participate in group lifts for 50 pounds or more • Carry objects weighing up to 49 pounds for short distances • Work shifts longer than eight hours in duration with potential for night and weekends • Perform physical tasks throughout the day without becoming overly tired • Ability to manipulate small wires and objects easily • Work in a noisy environment • Work in environments that are colder or hotter than a normal office environment Additional Job Requirements • Ability to relocate to Northern Virginia / Greater DC area • Ability and willingness to travel domestic and internationally for up to 50% of the year. Typical travel is 20%. • Required to provide personal transportation for meetings and job visits away from the office; reimbursed. About the team Amazon Web Services (AWS) is the world's most comprehensive and broadly adopted cloud platform. We pioneered cloud computing and never stopped innovating - that's why customers from the most successful startups to Global 500 companies trust our robust suite of products and services to power their businesses. Amazon values diverse experiences. Even if you do not meet all of the preferred qualifications and skills listed in the job description, we encourage candidates to apply. If your career is just starting, hasn't followed a traditional path, or includes alternative experiences, don't let it stop you from applying. We value work-life harmony. Achieving success at work should never come at the expense of sacrifices at home, which is why we strive for flexibility as part of our working culture. When we feel supported in the workplace and at home, there's nothing we can't achieve in the cloud. Here at AWS, it's in our nature to learn and be curious. Our employee-led affinity groups foster a culture of inclusion that empower us to be proud of our differences. Ongoing events and learning experiences, including our Conversations on Race and Ethnicity (CORE) and AmazeCon (diversity) conferences, inspire us to never stop embracing our uniqueness. We're continuously raising our performance bar as we strive to become Earth's Best Employer. That's why you'll find endless knowledge-sharing, mentorship and other career-advancing resources here to help you develop into a better-rounded professional. #DCCD_AMER BASIC QUALIFICATIONS• 5+ years of engineering, installation, or startup/commissioning of electrical and mechanical systems • Bachelor's degree in Mechanical/Electrical Engineering or 5 years of relevant discipline work experience • High technical competency in either mechanical or electrical or control systems utilized in critical infrastructures, with the capability to learn and be trained in the others • Understand the design concept and intent by reviewing mechanical or electrical design documentation, including drawings, specifications, vendor submittals and sequences of operations and provide feedback on the same in accordance with Amazon standards for basis of design • Develop but majorly review commissioning documentation such as test plans, scripts and reports developed by vendors to ensure accuracy in accordance with the design requirements PREFERRED QUALIFICATIONS• Advanced knowledge Microsoft Office Suite - Word, Excel, Outlook required; advanced knowledge of SharePoint (or similar) preferred • Strong communication skills, detail oriented, highly organized, and able to work in high stress environments to maintain calm and respectful interaction with multiple teams • Advance knowledge of mechanical, electrical, and controls systems for critical infrastructures • Ability to read and edit construction documents (design drawings, control diagrams, specifications, etc.) • Experience developing and executing test procedures for mechanical or electrical systems/components based on design intent and approved equipment submittals Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,100/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

We are seeking a highly skilled and detail-oriented Electrical Engineer to join our engineering team. This role is focused on the design and development of rugged, high-performance electronics used in mission-critical defense applications with a strong emphasis on PCB layout and design. Experience or interest in RF circuit and antenna design is a significant plus. The ideal candidate will bring a deep understanding of electronics design, with the ability to contribute across the full product development lifecycle-from concept and prototyping through production and sustainment. Clearance: An ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: GENERAL SKILLS AND ABILITIES: Oral Communications: Demonstrates ability to clearly and effectively articulate, present, and promote varied ideas and issues (to include sensitive or controversial topics) before a wide range of audiences. Makes clear and convincing oral presentations. Listens effectively; clarifies information as needed. Written Communications: Conveys written information in a clear, concise, organized, and convincing manner for the intended audience, using correct English grammar, punctuation, and spelling. Expresses thoughts persuasively and uses effective modes to reinforce message retention Ability to meet deadlines under pressure: Setting priorities for your own work in order to meet a deadline, coordinating work with other units in order to meet a deadline and setting work priorities and determining work assignments for other workers in order to meet a deadline date. Ability to work as a member of a team: Ability to work in multi-disciplinary teams to accomplish project objectives. Ability to do the work of the position without more than normal supervision: Ability to work independently, make decisions, plan operations, show job responsibility, and exercise initiative. Displays technical ability by identifying complex problems and reviews related information to develop and evaluate options and implement solutions. Demonstrates ability to independently handle and lead a range of directed tasks and problems, such as establishing project objectives, evaluating alternatives, selecting approach for meeting requirements and resolving technical problems, with minimal guidance from program management and/or program technical leads. Uses logic and reasoning to identify the strengths and weaknesses of alternative solutions, conclusions or approaches to problems. Through effective negotiation skills, consistently gains support of others, within and outside the organization for the implementation of proposed solutions. TECHNICAL SKILLS AND ABILITIES: Knowledge of the design, development, fabrication, and quality assurance of electrical and electronic systems that will be used in austere operational environments. Ability to learn and apply innovative technologies and techniques, within the electrical/electronic engineering discipline, toward to the products, processes, and capabilities. Displays technical ability and confidence by identifying problems and evaluating appropriate solutions. Demonstrates mature understanding of electrical engineering topics such as; analog/digital circuit design, embedded microcontroller design, and compact antenna design and integration. Able to perform, document, and defend modeling and analysis. Demonstrates mature knowledge and experience with test methodologies, diagnostic equipment, and software used to inspect, test, analyze, and resolve electrical systems and designs. Responsibilities: Conducts research, development, test, and integration of custom embedded systems and special communications capabilities. Contributes to the development of rapid engineering solutions to emergent non-conventional threats, specializing in turning high-level requirements into engineering designs that integrate microelectronics with novel fabrication techniques. Completes the design and development of electrical circuits, RF receivers, and electrically-small antenna designs with minimal oversight and guidance. Performs analog/digital circuit design, embedded microcontroller design, and compact antenna design and integration. Performs modeling of circuits, schematic capture, PCB layout, and circuit assembly / fabrication techniques. Develop coding to enable electronic designs. Presents technical status and decisions during design reviews. Supports integration and testing of developed products to ensure reliable functionality. Participates and leads developmental and verification testing, including extensive electromagnetic and environmental testing to enable rapid response to emergent Navy and national requirements. Work with Project Lead(s) to analyze and refine requirements, perform alternative solutions by research and investigation, and identify technical risks. Develop prototypes (in concert with technicians, as necessary) to prove out prototype designs Coordinate with mechanical engineers regarding the integration of designs into customized mechanical packages Develop documentation of design solutions and adhere to established configuration management processes Education: Bachelor's degree in Electrical Engineering or a related field (Master's preferred) Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate's experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $85K - $155K (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we're committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverage Employee Stock Ownership Plan (ESOP) Competitive 401(k) programs Retirement and Financial Counselors Health Savings and Health Reimbursement Accounts Flexible Spending Accounts Life insurance, short- & long-term disability Continuing Education Assistance Paid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military) Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counseling Supplemental Benefit Program Why Work for SimVentions?: SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It's also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact. Get Involved in Giving Back We believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer's success. Work with Brilliant People We don't just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy additional perks like: Employee Ownership: Work with the best and help build YOUR company! Family focus: Work for a team that recognizes the importance of family time. Culture: Add to our culture of technical excellence and collaboration. Dress code: Business casual, we like to be comfortable while we work. Resources: Excellent facilities, tools, and training opportunities to grow in your field. Open communication: Work in an environment where your voice matters. Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development. Employee Appreciation: Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more. Founding Partner of the FredNats Baseball team: Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite. Food: We have a lot of food around here! MWAC -

Education: Bachelor's or Master's degree in Electrical Engineering or a related field. Technical Skills: Proficiency in electrical circuit design, analysis, and simulation software; knowledge of electrical codes and standards; familiarity with CAD tools. Problem-Solving: Strong analytical and critical-thinking abilities to diagnose and resolve engineering challenges. Time Management: Strong organizational skills to manage multiple projects and meet deadlines. Experience: Previous experience in electrical engineering or related roles preferred; hands-on experience with testing equipment and manufacturing processes is a plus.

On behalf of my client, a leading federal contractor supporting VA Medical Centers nationwide, I am recruiting an experienced Electrical Engineer to support construction, renovation, and infrastructure upgrade projects across the Department of Veterans Affairs. This role provides technical oversight across design, procurement, construction, and post-construction phases, with a strong emphasis on electrical systems, code compliance, and contract administration. Key Responsibilities Support pre-design and design-phase electrical evaluations Review and provide recommendations on drawings, specifications, RFIs, submittals, and change orders Perform technical assessments and validate contractor work quality Ensure compliance with NEC, NFPA, IBC, VA design standards, and federal requirements Support procurement, construction-phase oversight, and closeout activities Conduct occasional onsite field visits for inspections and verification Provide electrical expertise for power distribution, lighting, emergency power, HVAC controls, telecom, and low-voltage systems Maintain construction documentation, project tracking, and reporting Qualifications U.S. Citizenship (required) Ability to pass a federal background check and obtain a VA PIV badge Bachelor's degree in Electrical Engineering (required) Professional Engineer (PE) license (required) Minimum 6 years of combined electrical design and construction experience Experience with healthcare, VA facilities, or federal environments preferred Strong knowledge of building codes, life safety systems, and construction best practices Skilled in reviewing scopes of work, cost evaluations, and contractor compliance Proficient in construction management software and general office applications

As a strong and stable company since 1960, Holder provides nationwide construction management services on complex projects in the aviation, office, technology, education, hospitality, and interiors markets. Our mission is to provide clients with quality construction services, across the country, supported by our offices in Atlanta, Charlotte, Columbus, Dallas, Denver, Phoenix, San Jose and Washington, DC. At Holder, our most valuable resources are our people, who carry forth our core values, brand, and reputation for performance. We are seeking a highly motivated Electrical Design Engineer to join our team in the Herndon or Atlanta that will support Mission Critical construction operations throughout the country. The ideal candidate for this job is a team player who thrives in a challenging and fast-paced yet supported environment. Your job is to do whatever it takes to help the team succeed. Required Experiences And Skills Has experience with the design process and management of complex Mission Critical projects, including processes, teams, and deliverables Understands risks and roles associated with varying project delivery methods Understands principals of contract documents and agreements Takes initiative to identify, track and actively address design and engineering challenges during the design and construction phases of a project. Ability to read construction drawings and specifications with primary experience with electrical and controls. Understanding and able to reference and apply National Electrical Code (NEC) standards and requirements. Ability to proactively articulate design document expectations and assess actual document status by phase (SD, DD, CD) Ability to conduct cross-discipline drawing coordination and design completion/quality reviews specifically for the MEP disciplines. Can contribute constructability, technical expertise and engineering solutions to a project's design evolution Ability to lead and manage the creation of Integrated Electrical Room concepts based on client or projected selected equipment. Ability to manage subcontractors in the completion of integrated design concepts to finalized products ready for manufacturing. Outstanding communication and time management skills Ability to work in a highly-collaborative environment Ability to work with minimal supervision; self-starter Ability to coach and mentor junior associates Manage deadlines, maintain files, and provide reporting to department leadership and/or jobsite leadership Requirements For This Position Include Candidate will preferably have 3-5+ Years in an Engineering position. Excellent verbal and written communication skills - ability to effectively communicate across projects and departments with associates of varying skill level. Also, be able to effectively communicate with third party organizations and consulting entities. Earn the trust of associates but maintain ability to independently assess and evaluate issues. Ability to have difficult conversations, free of emotion. Have a high level of morality and ethics. Proactively adjust priorities based on department, project and company needs and communicate adjustments. Be strategic and solutions/goal oriented and detail-oriented, but flexible to changes in plan. Independent worker with a collaborative mindset. Ability to effectively collect information and ask questions, analyze, evaluate, and make recommendations and then organize the appropriate teams for group decision making. Good listener and detail oriented. Escalate issues timely. Ability to innovate and comfortable being introduced to new technology. Maintains a continuous improvement mindset. Proficient in Microsoft based software including Word, Excel, Outlook, and PowerPoint. Highly organized, detail oriented. Coach and mentor others with meaningful feedback. Open to receiving meaningful feedback. Be open to additional responsibilities as role and department services evolve.

Help us build the future and we'll help you build a rewarding and purposeful career. Our global network is made up of architects, designers, planners, engineers, and environmental scientists all working towards the same goal. Join a team that brings inspirational architecture, landscapes, townscapes and places to our world, and we'll provide you unlimited space to grow. Who are we looking for? Our Southeast Property & Buildings business is looking for a Senior Security Video Surveillance & Access Control Design Engineer based in Chantilly, VA or Washington, DC to designing cutting-edge Electronic Security Systems (ESS) that make a real impact. We're looking for a dynamic professional to lead the design and coordination of systems including Access Control (ACS), Video Surveillance (VASS/CCTV), Intrusion Detection (IDS), vehicle barrier controls, and 2-way intercoms. In this role, you'll collaborate with architectural and engineering teams to develop construction drawings, specifications, and cost estimates from conceptual design through construction documents, construction administration, and project closeout. You'll bring creative, project-specific solutions to life while managing multi-discipline projects and engaging with stakeholders across regions. From proposal development to execution, you'll play a key role in delivering high-quality, innovative security solutions that serve our clients and communities locally and globally. Our Hybrid Work Model: Be part of the dynamic culture! Our workplace thrives on a hybrid model, combining in-office collaboration and flexibility. Join us in the office three days a week to contribute, connect and excel in our vibrant environment. Working with an energetic and high performing team, this position offers a variety of work and will see you involved in Needs Assessment: Uncover emerging issues or needs, identifying potential causes, barriers, and key stakeholders, as well as related issues. Solutions Analysis: Identify and evaluate complex, expertise-led solutions against a range of criteria to find the ones that best meet business needs. Improvement/Innovation: Identify shortcomings in existing business practices, then suggest and implement improvements while developing and delivering projects or a work stream within the organization's change management program. Involves working with guidance from senior colleagues. Knowledge Management System: Manage the knowledge management system with guidance from senior colleagues. May involve responsibility for the development or operation of the system. Feasibility Studies: Conduct complex feasibility studies from a technological and organizational perspective and document findings to complete cost-benefit analysis on implementing changes to business processes, products, or business unit structure. Contract Management: Manage a portfolio of contracts and negotiate service-level agreements. Will also plan, coordinate, and supervise activities relating to major contracts. Policy Development and Implementation: Develop procedures and interpret and apply policy for area of expertise to achieve specified outputs, or advise the wider business on application of policy, then monitor implementation of those procedures within the organization. Product and Solution Development: Analyze and evaluate the feasibility and relevance of proposed complex products and services and develop and amend, as necessary, with guidance from senior colleagues. May also be responsible for supervising activities performed by a product development or specialist team. Project Management: Manage a portfolio of projects while reporting to senior colleagues. Client & Customer Management (External): Manage important client relationships with guidance from senior colleagues, or oversee relationship management with a group of more transactional clients and customers. What will you bring to the team? Bachelor's degree in Electrical Engineering or related field; proven equivalent combination of education, skills, knowledge, abilities, and experience will be considered in liue of a Bachelor's degree Ability to work independently in Autodesk Revit required, 5+ Years experience a plus ASIS PSP Required; ASIS CPP a plus Completed the Software House C-Cure 9000 Applications Engineer/Consultant training 10+ years of relevant recent security consulting experience Experience with ATFP and CPTED Expert knowledge of industry leading access control, camera, NVR, video analytics, network, PLC, and intercom systems Strong project management skills, managing discipline specific and multi-disciplinary projects on time and within budget, while exceeding client expectations Working knowledge of state and national building and energy codes and standards a plus Highly developed communication skills, both oral and written, including client facing engagement, working well within team structures, and a proven ability to develop, mentor and collaborate with technical teammates. Federal Government DoD and civilian agencies' project and client experience a plus Understanding of project management software tools; BST experience a plus Networking experience is a plus Limited travel outside of the Washington D.C. area is anticipated, but may be deemed necessary by project #LI-JK1 As a multicultural organization, we encourage individual achievement and recognize the strength of a diverse workforce. GHD is an equal opportunity employer. We provide equal employment opportunities to all qualified employees and applicants without regard to race, color, religion, genetic information, national origin, sex (including same sex), sexual orientation, gender identity, pregnancy, childbirth, or related medical conditions, age, disability or handicap, citizenship status, service member status, or any other category protected by federal, state, or local law.

IMMEDIATE HIRING NEED Electrical/Controls Technician Compensation: $80K-90K base + OT opportunities is Located in York, PA Join our operations team as an Electrical/Controls Technician. This role is essential for maintaining, diagnosing, and correcting critical systems that drive our industrial processes. We are looking for self-starting, disciplined technical experts who thrive on troubleshooting complex electromechanical and automated control systems. Responsibilities Perform maintenance and repair on a variety of control systems, including electro/pneumatic/hydraulic/digital/Drive systems. Apply core knowledge of electrical theory (Ohm's law, AC/DC motors) and instrumentation (transmitters, valves, solenoids) to efficiently troubleshoot industrial equipment. Utilize critical thinking to diagnose and correct faults in automated control systems Read and interpret technical documents, schematics, and loop sheets to maintain operational readiness. Operate a range of measuring and test equipment (e.g., voltmeters, oscilloscopes, digital meters) for system diagnostics. Support 24/7 operations and work collaboratively with the maintenance team across different shifts as needed. Ensure adherence to all safety procedures and best practices, including Electrical safe work practices (NFPA-70E). Qualifications Education/Experience: Associate's degree in a relevant technical field or equivalent military/technical training, OR a minimum of one year of directly related industrial experience. Technical Acumen: Demonstrated ability to comprehend complex technical instructions, procedural manuals, and engineering drawings. Problem-Solving Skills: Strong analytical and critical thinking skills with proven experience in defining complex problems, collecting data, and drawing valid technical conclusions. Work Ethic: Adaptable and willing to work swing shifts and overtime as required by operational demands. Experience in a challenging, dynamic work environment is highly valued. ***Veterans Are Encouraged to Apply***

Founded in 1989, SOSi is among the largest private, founder-owned technology and services integrators in the defense and government services industry. We deliver tailored solutions, tested leadership, and trusted results to enable national security missions worldwide. Job Description Overview *** This position is contingent upon contract award *** SOS International LLC (SOSi) is seeking an Electrician Control Technician to provide support for a Facilities and Life Support Contract at an overseas location. Essential Job Duties Thorough working knowledge of AC/DC Electronic theory and solid-state electronics, DDC controls, and computer operations. Familiar with Honeywell, Powers, and Carrier Building Management Systems or similar systems. Qualifications Minimum Requirements Active in scope Secret security clearance. High school (or GED equivalent), technical or trade school graduate or equivalent apprenticeship for the mechanical trades. Five (5) years of experience in maintenance and repair of pneumatic and electronic controls and in qualifications listed above. Additional Information Work Environment Must reside at an overseas location. Long hours, exposure to harsh weather and other hazardous conditions. Wearing of location appropriate PPE and clothing when in the field is required. A willingness to work rotational shift if necessary, including days, evenings, and nights as well. Working at SOSi All interested individuals will receive consideration and will not be discriminated against for any reason.

A highly skilled and motivated Systems Engineer - Controls and Power Distribution Systems to join our Digital Infrastructure team. This role is responsible for the design, engineering, deployment, and troubleshooting of Power Distribution Systems and Control Systems in high-availability environments such as data centers. The ideal candidate will have a strong background in control systems, HVAC, electrical systems, and IT integration, with a focus on reliability, scalability, and energy efficiency. Required: Bachelor's degree in Electrical Engineering, Mechanical Engineering, Controls Engineering, or related field. 3-7 years of experience in medium or low voltage power distribution/controls engineering, preferably in mission-critical environments. Proficiency with BMS platforms (e.g., Schneider Electric, Niagara, Siemens, Honeywell, Johnson Controls). Strong understanding of HVAC, electrical systems, and control theory. Experience with networking, protocols (BACnet, Modbus, LonWorks), and system integration. Familiarity with commissioning processes and tools (Cx, TAB, etc.). Excellent problem-solving, communication, and project management skills. Must be able to work for any US employer without visa sponsorship. Preferred: Experience with data center or mission critical infrastructure. Knowledge of cybersecurity best practices for control systems. Familiarity with scripting or programming for automation and analytics. Job Responsibilities: Design and Engineering: Develop and review power distribution and control system designs for new construction and retrofit projects. Specify control strategies, sequences of operation, and integration requirements for HVAC, electrical, and other building systems. Collaborate with end users, MEP engineers, contractors and project team to ensure system compatibility and performance. Deployment and Commissioning: Oversee installation and commissioning of power distribution and control systems. Validate system functionality through testing and performance verification. Ensure compliance with industry standards, codes, and internal specifications. Integration and Optimization: Integrate power distribution equipment and systems with other building systems (e.g., fire alarm, security, and power monitoring). Diagnose and resolve system faults, alarms, and performance issues. Implement system optimizations and opportunities for improvement. Documentation and Training: Create and maintain system documentation, including schematics, control diagrams, O&M manuals, reports, etc. Train internal staff and contractors in system operation and best practices. Management, Supervision and Oversight Management of deliverables, project, task and documentation Onsite construction and customer relationship management Pay Range: $125k/yr. - $145k/yr.

Amentum is seeking an Electrical Control Technician for multiple OCONUS locations contingent upon award. The Electrical Control Technician is responsible for maintaining, repairing, and troubleshooting electrical control systems within a facility. This role ensures that all systems operate efficiently and safely, contributing to the overall operation of building management systems. The position requires collaboration with other technicians and departments to support seamless operations and address any technical challenges that arise. Essential Responsibilities * Perform regular maintenance on pneumatic and electronic controls to ensure optimal performance. * Troubleshoot and repair any issues with AC/DC electronic systems, solid-state electronics, and DDC controls. * Operate and maintain Honeywell, Powers, and Carrier Building Management Systems or similar systems. * Collaborate with other technicians and departments to resolve complex technical issues. * Document all maintenance and repair activities thoroughly and accurately. * Ensure all work complies with safety standards and regulations. * Be available for rotational shift work, including days, evenings, nights, weekends, and holidays, as required. Minimum Position Knowledge, Skills, and Abilities Required * High school diploma or GED equivalent, with technical or trade school graduation or equivalent apprenticeship in mechanical trades. * Thorough working knowledge of AC/DC electronic theory, solid-state electronics, DDC controls, and computer operations. * Familiarity with Honeywell, Powers, and Carrier Building Management Systems or similar systems. * At least five years of experience in maintenance and repair of pneumatic and electronic controls. * Ability to work effectively in both independent and team settings. * Strong problem-solving skills and attention to detail. * Willingness to work varied shifts, including overtime, weekends, and holidays as necessary. * Must possess a SECRET security clearance at the start of the contract and be able to obtain the appropriate clearance within eight months. Work Environment, Physical Demands, and Mental Demands * The position involves working in a variety of environments, which may include exposure to noise, dust, and varying temperatures. * Physical demands include standing, walking, bending, and lifting equipment or tools up to 50 pounds. * Mental demands include the ability to remain focused and attentive to detail while managing multiple tasks and troubleshooting complex issues. * The technician must be able to adapt to changing priorities and work under pressure to meet deadlines. * Other Responsibilities: Safety - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. Quality - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. Procedure Compliance - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters.

R&P is looking for a junior Amphibious Ship Design Electrical and Machinery Contol Systems Engineer who wants to join our team. We are a small-sized defense contractor providing Engineering, Logistics, Program Management and Technical Services to government clients. We need an engineer with a minimum of 1-year experience who is ready to join a fast-paced and exciting work environment supporting the system safety engineering aspects in support of the U.S. Navy's Amphibious Warship design team. Responsibilities Provides technical support to the LPD Machinery SEM Lead on electrical distribution and control systems including but not limited to: power generation, electrical distribution and machinery control. Provide general engineering/technical support for concept studies, feasibility studies, independent design reviews, In-service ship design and engineering activities, and shipboard installation support. Assist in development, review, and update of technical sections of the Requests for Proposal (RFP) the Navy is generating for solicitation to shipyards. Assist the programmatic and technical authority to implement DoD, SECNAV, OPNAV, and NAVSEA environmental and system safety requirements and policies. Review Contractor delivered electrical and machinery controls products/CDRLs and provide feedback on adequacy, gaps, and issues. Provide comprehensive, detailed, and timely communications and reports to all stakeholders. Research, develop, coordinate, draft, and review technical documentation for new ship procurements as required. Review, maintain, and make recommendations with regard to engineering plans, program records, technical manuals, design histories, design configurations, databases, regulatory body, and other documents. Assess shipboard requirements and provide recommended engineering design and integration solutions, evaluate and provide inputs to shipbuilding contract documentation, and conduct engineering reviews of Shipbuilder products to ensure accuracy and compliance with the shipbuilding contract design. Evaluate Engineering Change Proposals (ECPs) for compliance with technical scope and assess engineering projections with cost and labor estimates. Plan, coordinate and participate in Program, Ship Design, and Shipbuilder meetings and briefings. Provide technical coordination between the Ship Program Manager, SEA 05, ISEAs, SSGC, Shipbuilder and their various OEMs, and other shipbuilding personnel. Qualifications Bachelor's degree in engineering, electrical or marine. Minimum of 1-year professional experience in electrical, or marine engineering or relevant equivalent experience. Experience with applicable codes and standards such as ABS NVR, OSHA, and NFPA, is preferred. Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance. EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Exact salary will be commensurate with experience and qualifications.

Job DescriptionDescription: CONTROL SYSTEM ENGINEER III (Baltimore, MD) See Your Future in Our Future. As an independent systems integrator, InflexionPoint, specializes in process control, manufacturing intelligence, cyber security, and industrial networking. InflexionPoint provides services and solutions from initial requirements definition and system design through the implementation and commissioning of plant-wide systems. The cornerstone of our commitment to building long-term relationships with our customers is making every interaction an outstanding experience. At each step we strive to create lasting relationships built on quality, service, and responsiveness. InflexionPoint is currently looking for a Control System Engineer III based in Baltimore, MD . As a Control System Engineer III, your role will involve designing, developing, and implementing control systems for various industrial processes and applications. You'll be responsible for analyzing system requirements, designing control algorithms, and integrating hardware and software components to ensure optimal system performance. Job Duties and Responsibilities · Conduct comprehensive analysis of system requirements, specifications, and performance objectives. · Design control systems and develop control algorithms based on the identified requirements. · Collaborate with cross-functional teams to define system architectures and integration strategies. · Develop and implement control strategies using appropriate programming languages and tools. · Design and configure control hardware, including sensors, actuators, and programmable logic controllers (PLCs). · Create and modify control system schematics, wiring diagrams, and other technical documentation. · Integrate control systems with existing or new hardware and software components. · Perform system testing, troubleshooting, and debugging to ensure proper functionality. · Collaborate with quality assurance teams to develop and execute test plans and procedures. · Conduct performance analysis and optimization of control systems to enhance efficiency, stability, and reliability. · Identify and resolve issues related to system performance, response time, and accuracy. · Utilize data analysis techniques to monitor system performance and recommend improvements. · Prepare technical documentation, including system specifications, design documents, and user manuals. · Create reports and presentations to communicate project status, results, and recommendations to stakeholders. · Ensure compliance with relevant standards, regulations, and industry best practices. · Collaborate with multidisciplinary teams, including electrical engineers, software developers, and project managers. · Provide technical support and guidance to other engineers and technicians. · Stay updated with advancements in control system technologies and industry trends. Requirements: Education, Certifications and Experience · Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field. · Proven experience as a Control System Engineer, preferably with at least 5 years of relevant experience. · Strong knowledge of control system principles, algorithms, and methodologies. · Proficiency in programming languages such as C/C++, MATLAB, or Python. · Experience with industrial control systems (PLCs, DCS, SCADA) and associated software. · Familiarity with control system modeling and simulation tools. · Excellent problem-solving skills and the ability to analyze complex systems. · Strong communication and collaboration skills. Working Environment Duties are performed in an office environment and workshop, but will also require travel to customer sites/locations to perform analysis, installation, training maintenance, etc. Must be willing to travel approximately 30%; must be willing to work in a variety of manufacturing facilities. Must be able to routinely use standard office equipment which includes, but is not limited to, computers, phones, photocopiers, and filing cabinets. Minimal exposure to excessive noise or adverse environmental issues. Physical Demands Must be able to sit and/or stand for prolonged hours consistent with the average workday; to operate a computer and other office equipment, including but not limited to computer, printer, etc. Must be able to climb stairs and/or ladders; must be able to stoop, kneel, crouch and/or crawl; must be able to move, transport, position, place, install, remove and/or replace various types of equipment; must be able to lift 50-70 lbs. unassisted. EEO InflexionPoint is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, religion, color, sex, sexual orientation, age, national origin, marital status, genetic information, pregnancy, disability, or any other protected characteristic as outlined by federal, state, or local laws. InflexionPoint is looking for dedicated individuals to join our team and share in our success. The Company provides a supportive and engaging work environment that demonstrates that we value our employees. Our employees receive competitive salary, performance-based advancement, paid time off (PTO), health benefits and 401(k) with employer match, as well as other great incentives. Qualified applicants may submit their resume for consideration.

Soaring above the ordinary, the IMPACT Fly Team is a powerhouse of innovation, precision, and technical mastery. As Major Project Automation & Controls Technicians, you're the architects of efficiency-engineering smarter systems, optimizing workflows, and tackling high-stakes challenges with finesse. Whether troubleshooting on-site or designing groundbreaking solutions, this elite squad is always ready to fly in, fix, and revolutionize. Ready to take your expertise to the next level? Because IMPACT is more than a name-it's a mission. 🚀 What we offer Competitive salary Paid vacation/holidays/sick time - 10+ days of vacation first year Comprehensive benefits package including 401K, medical, dental, and vision care - Available day one Extensive product and on the job/cross training opportunities With outstanding resources Encouraging and collaborative team environment Dedication to safety through our Zero Harm policy Check us Out: A Day in a Life at Johnson Controls: What you will do As a senior level team member of the iMPACT Fly Team, you will be responsible for traveling 75-100% of the time to and assisting JCI Customers at all levels of building automation system programming, checkout and commissioning. This will include validating hardware and software commissioning activities for building automation systems. You will need to apply your advanced HVAC & Building Automation experience to work on assigned projects. You will work directly on multiple project teams to assist the Project Managers and Field Technicians. How you will do it Loads system-level controller software Performs advanced commissioning and system diagnostics from system-level controllers to end devices (such as: sensors, actuators, etc.) and completes all required commissioning documentation Keeps management and JCI contractor or customer informed of job progress and issues Calibrates systems requiring basic electronic test equipment Completes administrative tasks including but not limited to time sheets, expense reports, and on-site documentation Documents changes and provides information for as-built documentation Communicates with the JCI contractor or customer upon arrival and before leaving the work site Follows all safety standards and attends required safety training. High degree of regard to employee and subcontractor safety. What we look for Advanced computer skills (Metasys preferred) Advanced knowledge of electrical testing and commissioning tools Strong documentation acumen Good communication and listening skills Advanced knowledge of mechanical HVAC systems Low voltage/120-volt wiring skills preferred A valid driver's license, with no major or frequent traffic violations HIRING HOURLY RANGE: $31- $42 (Hourly rate to be determined by the education, experience, knowledge, skills, and abilities of the applicant, internal equity, and alignment with market data.) This position includes a competitive benefits package. For details, please visit the Employee Benefits tab on our main careers page at *************************************** Johnson Controls International plc. is an equal employment opportunity and affirmative action employer and all qualified applicants will receive consideration for employment without regard to race, color, religion, sex, national origin, age, protected veteran status, genetic information, sexual orientation, gender identity, status as a qualified individual with a disability or any other characteristic protected by law. To view more information about your equal opportunity and non-discrimination rights as a candidate, visit EEO is the Law. If you are an individual with a disability and you require an accommodation during the application process, please visit here.

R&P is looking for a junior Amphibious Ship Design Electrical and Machinery Contol Systems Engineer who wants to join our team. We are a small-sized defense contractor providing Engineering, Logistics, Program Management and Technical Services to government clients. We need an engineer with a minimum of 1-year experience who is ready to join a fast-paced and exciting work environment supporting the system safety engineering aspects in support of the U.S. Navy's Amphibious Warship design team. Responsibilities * Provides technical support to the LPD Machinery SEM Lead on electrical distribution and control systems including but not limited to: power generation, electrical distribution and machinery control. * Provide general engineering/technical support for concept studies, feasibility studies, independent design reviews, In-service ship design and engineering activities, and shipboard installation support. * Assist in development, review, and update of technical sections of the Requests for Proposal (RFP) the Navy is generating for solicitation to shipyards. * Assist the programmatic and technical authority to implement DoD, SECNAV, OPNAV, and NAVSEA environmental and system safety requirements and policies. * Review Contractor delivered electrical and machinery controls products/CDRLs and provide feedback on adequacy, gaps, and issues. * Provide comprehensive, detailed, and timely communications and reports to all stakeholders. * Research, develop, coordinate, draft, and review technical documentation for new ship procurements as required. * Review, maintain, and make recommendations with regard to engineering plans, program records, technical manuals, design histories, design configurations, databases, regulatory body, and other documents. * Assess shipboard requirements and provide recommended engineering design and integration solutions, evaluate and provide inputs to shipbuilding contract documentation, and conduct engineering reviews of Shipbuilder products to ensure accuracy and compliance with the shipbuilding contract design. * Evaluate Engineering Change Proposals (ECPs) for compliance with technical scope and assess engineering projections with cost and labor estimates. * Plan, coordinate and participate in Program, Ship Design, and Shipbuilder meetings and briefings. * Provide technical coordination between the Ship Program Manager, SEA 05, ISEAs, SSGC, Shipbuilder and their various OEMs, and other shipbuilding personnel. Qualifications * Bachelor's degree in engineering, electrical or marine. * Minimum of 1-year professional experience in electrical, or marine engineering or relevant equivalent experience. * Experience with applicable codes and standards such as ABS NVR, OSHA, and NFPA, is preferred. * Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance. EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Exact salary will be commensurate with experience and qualifications. Qualifications Secret

Are you experienced in Critical Infrastructure Commissioning and looking for a fast paced environment to work in? As a Data Center Commissioning Engineer (CxE), you will be part of highly creative, efficient team tasked with tackling fascinating and challenging problems building and supporting the operations of Amazon owned data centers. The Amazon Commissioning team (ACx) understands, evaluates, defines and manages the expectations of construction quality in accordance to engineering designs to meet the customer requirements. The CxE is responsible for supporting vendors, contractors, and other teams involved in the construction and commissioning of various systems such as: Medium and low voltage power systems Generators UPS HVAC (Air Handlers / Exhaust Fans / VFD) Chilled Water Systems Building Management systems (BMS) Electrical Power Monitoring Systems (EPMS) Testing and balancing Pumps and Hydronic systems Key job responsibilities As the Commissioning Engineer (CxE), you will provide testing and validation oversight of AWS data center electrical and mechanical infrastructure. This includes, but not limited to, review of design documents and equipment submittals, leading Factory Witness Testing (FWT), and managing third-party commissioning vendors in the performance of onsite pre-functional, functional, and integrated systems testing. You will own your projects' successes where you Deep Dived to resolve technical issues and had Bias for Action to address schedule impacts and coordination demands onsite. You will be sharing your lessons learned leading towards team growth and program improvements. You will get the opportunity to provide multi-discipline input into the scheduling, test script development, designing, and planning of projects. During commissioning, you will be continuously auditing Cx vendors' activities to ensure compliance with environmental, quality, and safety requirements. Following the AWS project reporting format, you will be responsible for regular reporting of commissioning progress and metrics of assigned project to your Regional Commissioning Manager. You will have the opportunity to lead several projects simultaneously to achieve key milestones and deliver data center capacity, while managing project budget as approved by Finance. A day in the life On a typical project, the CxE works across AWS engineering, capacity delivery, operations, and contractor teams to coordinate site activities, prioritize tasks, and ensure each issue has clear path to resolution. The CxE manages the project commissioning vendor whose primary scope is to execute functional tests, identify issues, determine criticality, propose solutions, and document their findings. If project turnover is at risk, the CxE escalates to the appropriate stakeholders. Upon project completion, the CxE will communicate lessons learned to help peers on similar projects in flight and participate in initiatives that drive improvement to the commissioning program. About the team The AWS Data Center Commissioning Team (ACx) is a wholly independent business within the DCGS organization. This team of veteran professional Electrical Engineers, Mechanical Engineers, Controls Engineers, Project Managers, and Operators is uniquely positioned to provide detailed engineering and operational review and testing of equipment designs, operational functionality and construction practices. The team is focused on ensuring the rapid delivery of a quality product while maintaining full transparency, recording metrics of any and every defect discovered during commissioning. BASIC QUALIFICATIONS- 5+ years of engineering, installation, or startup/commissioning of electrical and mechanical systems experience - Bachelor's degree in Mechanical/Electrical Engineering or 5 years of relevant discipline work experience - High technical competency in either mechanical or electrical or control systems utilized in critical infrastructures, with the capability to learn and be trained in the others. - Understand the design concept and intent by reviewing mechanical or electrical design documentation, including drawings, specifications, vendor submittals and sequences of operations and provide feedback on the same in accordance with Amazon standards for basis of design. - Develop but majorly review commissioning documentation such as test plans, scripts and reports developed by vendors to ensure accuracy in accordance with the design requirements. PREFERRED QUALIFICATIONS- Advanced knowledge Microsoft Office Suite - Word, Excel, Outlook required; advanced knowledge of SharePoint (or similar) preferred - Strong communication skills, detail oriented, highly organized, and able to work in high stress environments to maintain calm and respectful interaction with multiple teams - Advanced knowledge of mechanical, electrical, and controls systems for critical infrastructures - Ability to read and edit construction documents (design drawings, control diagrams, specifications, etc.) - Experience developing and executing test procedures for mechanical or electrical systems/components based on design intent and approved equipment submittals Amazon is an equal opportunity employer and does not discriminate on the basis of protected veteran status, disability, or other legally protected status. Our inclusive culture empowers Amazonians to deliver the best results for our customers. If you have a disability and need a workplace accommodation or adjustment during the application and hiring process, including support for the interview or onboarding process, please visit ********************************************************* for more information. If the country/region you're applying in isn't listed, please contact your Recruiting Partner. Our compensation reflects the cost of labor across several US geographic markets. The base pay for this position ranges from $105,100/year in our lowest geographic market up to $185,000/year in our highest geographic market. Pay is based on a number of factors including market location and may vary depending on job-related knowledge, skills, and experience. Amazon is a total compensation company. Dependent on the position offered, equity, sign-on payments, and other forms of compensation may be provided as part of a total compensation package, in addition to a full range of medical, financial, and/or other benefits. For more information, please visit ******************************************************** This position will remain posted until filled. Applicants should apply via our internal or external career site.

Amentum is seeking an Electrical Control Technician for multiple OCONUS locations contingent upon award. The Electrical Control Technician is responsible for maintaining, repairing, and troubleshooting electrical control systems within a facility. This role ensures that all systems operate efficiently and safely, contributing to the overall operation of building management systems. The position requires collaboration with other technicians and departments to support seamless operations and address any technical challenges that arise. **Essential Responsibilities** + Perform regular maintenance on pneumatic and electronic controls to ensure optimal performance. + Troubleshoot and repair any issues with AC/DC electronic systems, solid-state electronics, and DDC controls. + Operate and maintain Honeywell, Powers, and Carrier Building Management Systems or similar systems. + Collaborate with other technicians and departments to resolve complex technical issues. + Document all maintenance and repair activities thoroughly and accurately. + Ensure all work complies with safety standards and regulations. + Be available for rotational shift work, including days, evenings, nights, weekends, and holidays, as required. **Minimum Position Knowledge, Skills, and Abilities Required** + High school diploma or GED equivalent, with technical or trade school graduation or equivalent apprenticeship in mechanical trades. + Thorough working knowledge of AC/DC electronic theory, solid-state electronics, DDC controls, and computer operations. + Familiarity with Honeywell, Powers, and Carrier Building Management Systems or similar systems. + At least five years of experience in maintenance and repair of pneumatic and electronic controls. + Ability to work effectively in both independent and team settings. + Strong problem-solving skills and attention to detail. + Willingness to work varied shifts, including overtime, weekends, and holidays as necessary. + Must possess a SECRET security clearance at the start of the contract and be able to obtain the appropriate clearance within eight months. **Work Environment, Physical Demands, and Mental Demands** + The position involves working in a variety of environments, which may include exposure to noise, dust, and varying temperatures. + Physical demands include standing, walking, bending, and lifting equipment or tools up to 50 pounds. + Mental demands include the ability to remain focused and attentive to detail while managing multiple tasks and troubleshooting complex issues. + The technician must be able to adapt to changing priorities and work under pressure to meet deadlines. + Other Responsibilities: **Safety** - Amentum enforces a safety culture whereby all employees have the responsibility for continuously developing and maintaining a safe work environment. As appropriate, each employee is responsible for completing all training requirements and fulfilling all self-aid/buddy aid responsibilities, participating in emergency response tasks and serving on safety committees and teams. **Quality** - Quality is the foundation for the management of our business and the keystone to our goal of customer satisfaction. It is our policy to consistently provide services that meet customer expectations. Accordingly, each employee must conform to the Amentum Quality Policy and carry out job activities in compliance with applicable Amentum Quality System documents and customer contracts. Each employee must read and understand his/her Quality Management and Customer Satisfaction responsibilities. **Procedure Compliance** - Each employee must read, understand and implement the general and specific operational, safety, quality and environmental requirements of all plans, procedures and policies pertaining to his/her job. Amentum is proud to be an Equal Opportunity Employer. Our hiring practices provide equal opportunity for employment without regard to race, sex, sexual orientation, pregnancy (including pregnancy, childbirth, breastfeeding, or medical conditions related to pregnancy, childbirth, or breastfeeding), age, ancestry, United States military or veteran status, color, religion, creed, marital or domestic partner status, medical condition, genetic information, national origin, citizenship status, low-income status, or mental or physical disability so long as the essential functions of the job can be performed with or without reasonable accommodation, or any other protected category under federal, state, or local law. Learn more about your rights under Federal laws and supplemental language at Labor Laws Posters (********************************* SkbztPuAwwxfs) .

CONTROL SYSTEM ENGINEER III (Baltimore, MD) See Your Future in Our Future. As an independent systems integrator, InflexionPoint, specializes in process control, manufacturing intelligence, cyber security, and industrial networking. InflexionPoint provides services and solutions from initial requirements definition and system design through the implementation and commissioning of plant-wide systems. The cornerstone of our commitment to building long-term relationships with our customers is making every interaction an outstanding experience. At each step we strive to create lasting relationships built on quality, service, and responsiveness. InflexionPoint is currently looking for a Control System Engineer III based in Baltimore, MD . As a Control System Engineer III, your role will involve designing, developing, and implementing control systems for various industrial processes and applications. You'll be responsible for analyzing system requirements, designing control algorithms, and integrating hardware and software components to ensure optimal system performance. Job Duties and Responsibilities · Conduct comprehensive analysis of system requirements, specifications, and performance objectives. · Design control systems and develop control algorithms based on the identified requirements. · Collaborate with cross-functional teams to define system architectures and integration strategies. · Develop and implement control strategies using appropriate programming languages and tools. · Design and configure control hardware, including sensors, actuators, and programmable logic controllers (PLCs). · Create and modify control system schematics, wiring diagrams, and other technical documentation. · Integrate control systems with existing or new hardware and software components. · Perform system testing, troubleshooting, and debugging to ensure proper functionality. · Collaborate with quality assurance teams to develop and execute test plans and procedures. · Conduct performance analysis and optimization of control systems to enhance efficiency, stability, and reliability. · Identify and resolve issues related to system performance, response time, and accuracy. · Utilize data analysis techniques to monitor system performance and recommend improvements. · Prepare technical documentation, including system specifications, design documents, and user manuals. · Create reports and presentations to communicate project status, results, and recommendations to stakeholders. · Ensure compliance with relevant standards, regulations, and industry best practices. · Collaborate with multidisciplinary teams, including electrical engineers, software developers, and project managers. · Provide technical support and guidance to other engineers and technicians. · Stay updated with advancements in control system technologies and industry trends. Requirements Education, Certifications and Experience · Bachelor's or Master's degree in Electrical Engineering, Control Systems Engineering, or a related field. · Proven experience as a Control System Engineer, preferably with at least 5 years of relevant experience. · Strong knowledge of control system principles, algorithms, and methodologies. · Proficiency in programming languages such as C/C++, MATLAB, or Python. · Experience with industrial control systems (PLCs, DCS, SCADA) and associated software. · Familiarity with control system modeling and simulation tools. · Excellent problem-solving skills and the ability to analyze complex systems. · Strong communication and collaboration skills. Working Environment Duties are performed in an office environment and workshop, but will also require travel to customer sites/locations to perform analysis, installation, training maintenance, etc. Must be willing to travel approximately 30%; must be willing to work in a variety of manufacturing facilities. Must be able to routinely use standard office equipment which includes, but is not limited to, computers, phones, photocopiers, and filing cabinets. Minimal exposure to excessive noise or adverse environmental issues. Physical Demands Must be able to sit and/or stand for prolonged hours consistent with the average workday; to operate a computer and other office equipment, including but not limited to computer, printer, etc. Must be able to climb stairs and/or ladders; must be able to stoop, kneel, crouch and/or crawl; must be able to move, transport, position, place, install, remove and/or replace various types of equipment; must be able to lift 50-70 lbs. unassisted. EEO InflexionPoint is an equal opportunity employer that is committed to diversity and inclusion in the workplace. We prohibit discrimination and harassment of any kind based on race, religion, color, sex, sexual orientation, age, national origin, marital status, genetic information, pregnancy, disability, or any other protected characteristic as outlined by federal, state, or local laws. InflexionPoint is looking for dedicated individuals to join our team and share in our success. The Company provides a supportive and engaging work environment that demonstrates that we value our employees. Our employees receive competitive salary, performance-based advancement, paid time off (PTO), health benefits and 401(k) with employer match, as well as other great incentives. Qualified applicants may submit their resume for consideration.

R&P is looking for a junior Amphibious Ship Design Electrical and Machinery Contol Systems Engineer who wants to join our team. We are a small-sized defense contractor providing Engineering, Logistics, Program Management and Technical Services to government clients. We need an engineer with a minimum of 1-year experience who is ready to join a fast-paced and exciting work environment supporting the system safety engineering aspects in support of the U.S. Navy's Amphibious Warship design team. Responsibilities Provides technical support to the LPD Machinery SEM Lead on electrical distribution and control systems including but not limited to: power generation, electrical distribution and machinery control. Provide general engineering/technical support for concept studies, feasibility studies, independent design reviews, In-service ship design and engineering activities, and shipboard installation support. Assist in development, review, and update of technical sections of the Requests for Proposal (RFP) the Navy is generating for solicitation to shipyards. Assist the programmatic and technical authority to implement DoD, SECNAV, OPNAV, and NAVSEA environmental and system safety requirements and policies. Review Contractor delivered electrical and machinery controls products/CDRLs and provide feedback on adequacy, gaps, and issues. Provide comprehensive, detailed, and timely communications and reports to all stakeholders. Research, develop, coordinate, draft, and review technical documentation for new ship procurements as required. Review, maintain, and make recommendations with regard to engineering plans, program records, technical manuals, design histories, design configurations, databases, regulatory body, and other documents. Assess shipboard requirements and provide recommended engineering design and integration solutions, evaluate and provide inputs to shipbuilding contract documentation, and conduct engineering reviews of Shipbuilder products to ensure accuracy and compliance with the shipbuilding contract design. Evaluate Engineering Change Proposals (ECPs) for compliance with technical scope and assess engineering projections with cost and labor estimates. Plan, coordinate and participate in Program, Ship Design, and Shipbuilder meetings and briefings. Provide technical coordination between the Ship Program Manager, SEA 05, ISEAs, SSGC, Shipbuilder and their various OEMs, and other shipbuilding personnel. Qualifications Bachelor's degree in engineering, electrical or marine. Minimum of 1-year professional experience in electrical, or marine engineering or relevant equivalent experience. Experience with applicable codes and standards such as ABS NVR, OSHA, and NFPA, is preferred. Must be a US citizen with the ability to obtain/maintain a DoD Secret security clearance. EEO Statement R&P Technologies provides equal opportunity for all persons and prohibits discrimination in employment because of race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability (including pregnancy, childbirth or related medical conditions), veteran or marital status, or any other factor prohibited by law. This policy applies to all terms and conditions of employment, including, but not limited to, hiring, placement, promotion, termination, layoff, recall, transfer, leave, compensation, and training. R&P maintains an Affirmative Action Plan to establish fair access to employment opportunities and to create a work community that is an accurate reflection of the qualified workforce. Due to security clearance requirements, U.S. citizenship is required for most positions Salary R&P offers a highly competitive compensation package that includes contributions towards health insurance, 401(k) matching, and other non-salary benefits. Exact salary will be commensurate with experience and qualifications.