Controls technician jobs in Conroe, TX - 282 jobs

BAS Controls Technician - Houston, TX - Full-Service HVAC & Building Automation Company - Up to $60/hr + Company Vehicle A leading full-service HVAC and Building Automation contractor is seeking an experienced BAS Controls Technician to support commercial and industrial facilities across the greater Houston, TX region. This role focuses on the installation, start-up, troubleshooting, and commissioning of DDC/BAS systems for a wide variety of building environments. Position: Title: BAS Controls Technician Location: Houston, TX (local travel to customer facilities) Compensation & Benefits: Hourly Wage: $45.00 - $60.00/hr (DOE) Overtime: Available Company Vehicle & Gas Card: Provided Medical, Dental, and Vision Insurance Short-Term & Long-Term Disability 401(k) Retirement Plan Paid Vacation & Holiday Time About the Opportunity: The BAS Controls Technician will be part of a project and service team responsible for commissioning, troubleshooting, and maintaining direct digital control (DDC) and building automation systems. This position requires hands-on technical skills, strong problem-solving abilities, and professional communication with customers, contractors, and internal teams. Key Responsibilities: Install, start up, and commission DDC/BAS control systems for commercial HVAC applications Diagnose, troubleshoot, and repair BAS, HVAC control equipment, and networked devices Perform detailed point-to-point checkout, functional testing, and system performance verification Install, wire, and test sensors, controllers, actuators, and field-level devices Write, adjust, and load BAS programs using standard libraries and custom logic when needed Pull wire, install conduit, and support electrical/control infrastructure installation Work closely with mechanical and controls teams during equipment start-up and commissioning Optimize and tune existing BAS systems for better comfort, energy efficiency, and performance Communicate clearly with building owners, end-users, contractors, and internal stakeholders Ensure all work complies with project specifications, quality standards, and safety protocols Ideal Candidate Profile: Experience as a BAS Controls Technician or similar HVAC/DDC controls role Strong understanding of DDC troubleshooting, commissioning, and controls integration Hands-on experience with control wiring, device installation, and system start-up Proficiency with commissioning processes and point-to-point verification Ability to edit, write, and manipulate BAS programs Comfortable pulling wire, installing conduit, and working on construction or retrofit projects Strong customer service and communication skills Self-driven, organized, and able to work effectively both independently and within a team Preferred Technical Experience: Hands-on experience with Tridium Niagara platforms Familiarity with Distech and/or Siemens controls systems Background in commercial HVAC controls within office buildings, healthcare, education, or industrial facilities How to Apply: If you have strong BAS controls experience and are interested in a field-focused role offering competitive pay, a company vehicle, and long-term career potential, please submit your application through this posting. Qualified candidates will be contacted for next steps.

Follow Quest on Linkedin at: Quest Energy Group Quest (************************* is North America's Leading Energy Executive Search and Talent Acquisition Firm. We are currently looking for Control Techs for Heavy Duty Gas Turbines. These are Direct Hire full time positions, that will require travel to job sites, and provide control service solutions.

As a Control Technician, you will be responsible for installing, repairing, and maintaining the building automation system and equipment in the hospital premises and outlying buildings. Equipment controls include but is not limited to HVAC, lighting, compressors, vacuums, WAGE pumps and lift stations. Assignments also include working with computer software and hardware, such as controllers, sensors, actuators, and networks. The technician will need to read and follow codes, standards, and regulations, program and calibrate devices, monitor and optimize system performance, and troubleshoot and resolve issues. Primary Job Functions Install, calibrate, and maintain DDC systems in accordance with engineering specifications. Perform routine inspections to identify and address potential issues before they become major problems. Diagnose and repair faults in DDC systems including valves, actuators, sensors, and other related components. Collaborate with other team members to identify and resolve complex issues. Conduct testing and calibrations of DDC devices to ensure accurate and efficient system performance. Implement adjustments to optimize control processes and enhance overall system functionality. Maintain accurate records of installations, repairs, and maintenance activities. Create documentation for troubleshooting procedures and system configurations. Provide technical support and guidance to other team members. Adhere to safety protocols and ensure compliance with relevant regulations. Stay informed about industry standards and best practices related to DDC systems. Education, Experience and Certification High School Diploma or equivalent 5 years' experience as a control technician in a commercial or institutional setting Working Conditions Must be able to lift 50 lbs., squat, bend, stoop and kneel for short periods, climb a ladder, stand for long periods of time, constant arm extensions. Occasional exposure to elements such as heat, cold, noise, dust, dirt, chemicals, but none to the point of being disagreeable. May involve minor safety hazards where likely result would be cuts, bruises, etc. Must be able to pass a local background check and have the ability to obtain and maintain NAC/LAC clearance after hire. Knowledge, Skills, and Abilities Excellent oral and written communication skills Knowledge of computer software programs to include Word, Excel, Power Point and Outlook required Experience with a Facility Computerized Maintenance Management System software (CMMS) highly desired Certified Controls Systems Technician (CCST) level 1 certification required or able to obtain within 6 months of hire date Knowledge of controls techniques, tools, materials, and codes Ability to read and follow codes, standards, and regulations. Ability to install, repair and maintain various types of building automation systems and equipment Ability to work with computer software and hardware Ability to program and calibrate devices, monitor and optimize system performance Ability to troubleshoot and resolve issues Ability to work independently and as part of a team Ability to lift and carry heavy objects Ability to work under pressure and meet deadlines Ability to communicate effectively with staff, contractors, and vendors Disclaimer CBRE Government and Defense is thrilled at the opportunity for you to apply to one of our roles. The rate for this position is $32. This position may also be eligible for a wide range of benefits based on applicable bargaining unit agreements. This description is not intended to be an “all inclusive” list of the accountabilities of the job described. Rather, it describes the general nature of the job. In addition, some aspects of this job may change over time, according to business needs, and these changes may not be recorded immediately. The requirements stated represent the minimum levels of knowledge, skills and/or abilities to qualify and satisfactorily perform this job. THIS DOCUMENT SHOULD NOT BE CONSTRUED AS CREATING A CONTRACT OF EMPLOYMENT BETWEEN CBRE GOVERNMENT & DEFENSE SERVICES AND ANY OF ITS EMPLOYEES OR OTHERWISE ALTERING AN EMPLOYEE'S AT WILL EMPLOYMENT RELATIONSHIP WITH CBRE GOVERNMENT & DEFENSE SERVICES.

Company Profile: USA DeBusk is a best-in-class mechanical and industrial cleaning services provider specializing in servicing the downstream energy market. We offer the full suite of maintenance and turnaround services including hydro blasting, hydro cutting, hydro excavation, chemical cleaning, PEP TM polymer extraction service, vacuum services, tank cleaning, degassing/vapor control, FCC catalyst handling and transportation, and specialty turnaround services. Founded in 2012, USA DeBusk currently has field offices in 24 cities and continues to provide services internationally. Position Summary The Vapor Control Technician will perform a wide range of physical activities that require strength and flexibility of whole body for handling, positioning, moving and manipulating equipment and materials, emergency response, equipment operation, project site setup, mobilization, chemical handling, site remediation and process verification and walk throughs. Responsibilities Operate and set-up all necessary vapor control equipment such as scrubbers. Thermal oxidizers, flares and all manner of supporting equipment such as heat exchangers, hoses and ductwork in accordance with operational and training and guidelines and safety procedures. Adhere to all safety policies and practices, including but not limited to personal protective gear. Ability to work safely in and around heavy machinery in loud, hazardous, and heaving industrial settings. Manually clean, install, fit repair valves, caps, hoses, pumps, gaskets and all other external and internal equipment on tanks. Maintain operational integrity of environmental systems, to include monitoring and data logging. Assist in the inspection of equipment, hoses, connections, pumps and general work area prior to starting any job. Informs supervisor of deficiencies, which may cause accidents, injuries or lost productivity. Requirements: Must be able to travel for extended periods of time Respond to emergency calls 24 hours, 7 days a week if called upon. Ability to work for extended periods of time within a confined space, in extreme temperature environments and at high elevation. Ability to perform duties in accordance with training and standard operating procedures, Ability to understand and follow specific procedures and directions. Ability to lift, move and handle up to 50lb hoses Valid TWIC card preferred. Successfully complete drug screen, pre-employment physical and all required background checks. Experience Required Oil and gas contractor experience preferred but not required. General labor experience is a plus. Benefits: Benefits include medical, vision, company paid term life and AD&D insurance, supplemental life and AD&D insurance, 401K retirement savings plan, and paid time off. EQUAL EMPLOYMENT OPPORTUNITY: USA DeBusk is an equal opportunity employer, and we thrive on our differences for the benefit of our employees, our customers, and our community. It is our policy to provide equal opportunities in all decisions related to hiring, training, and promoting regardless of race, religion, color, gender, disability, national origin, ancestry, age, military status, sexual orientation, marital status or any legally protected characteristic or class.

Job Description Termite & Pest Control Technician - Join Our Growing Team! Are you looking for a stable, long-term career with growth opportunities? Termite & Pest control is an essential service, and we've seen tremendous success over the past two years, making it the perfect time to join our team! With over 20 years of industry experience, we are offering a job where hard work meets stability. Why Work With Us? Career Advancement: We are committed to your growth. As a full-time team member, you'll have opportunities for career development and advancement in a stable industry. Take-Home Company Vehicle: Enjoy the convenience of a company-provided truck and gas card. Comprehensive Benefits: Health, dental, vision, and life insurance plans are available, along with a 401k plan with matching contributions to help you secure your future. Competitive Pay: Earn a monthly commission between $2,500 to $4,500, plus bonuses, sales commissions, and tips. Paid Time Off: Enjoy paid time off to maintain a healthy work-life balance. What You'll Be Doing: Provide top-tier termite and pest control services in a variety of environments. Work outdoors in all types of weather-hot, cold, or wet. Operate independently in the field, Monday to Saturday (with some flexibility for weekend work as needed). Be an essential part of a team that plays a vital role in our customers' safety and well-being. What We Expect From You: MUST HAVE a termite license and previous experience. Previous experience in pest control is preferred but not required. Strong knowledge of termite behavior, treatment methods, and pest control regulations. Physical Stamina: This role requires hard work and outdoor work in all types of weather. Dependability: We expect you to show up on time and work with integrity, as our customers rely on us. Strong Driving Record: Must have held a valid driver's license for at least 4 years, with no more than 2 violations and 1 accident in the past 3 years. No major violations (DUI, reckless driving, etc.) in the last 5 years. Pass a Drug Test: Be prepared to pass a drug test during the interview and random tests thereafter. Age Requirement: Insurance coverage requires employees to be 21 or older. Perks & Benefits: 401(k) with matching contributions Health, dental, and vision insurance Life insurance Paid time off Employee discounts Bonus and commission opportunities Schedule: Monday to Friday (with some Saturday shifts and weekend flexibility as needed) Work Location: Field-based - You will be working on the road. If you're ready for a rewarding career in a stable industry with growth potential, we'd love to hear from you. Apply today!

Successful Commercial Security Integrator has decades of experience & expertise in creating solutions on custom and complex problems and requests. Throughout the United States they have been proving the difference of having the technical and problem-solving mentality. They ensure this level of service by certifying and investing in their talent and are currently searching for the next Senior Technician to join them on their mission. Access Control Technician - Job Description: As an Access Control Technician, you will leverage your experience and skills to contribute to large-scale commercial projects. Working with top contractors in Texas, your responsibilities will include: 2+ years in relevant access control installation, service, and configuration. Proficiency in reading and understanding electrical schematics. Functional knowledge of low voltage systems and relays. Ability to install cabling, mount equipment, install card readers, door contacts, mag locks, electrified strikes, and integrated systems. Proficiency in assembling and installing access control panels, power supplies, cable pathways, CAT cable, low voltage cable, and coax. Ability to test voltage and continuity using a multimeter. General understanding of Network Technology. Proficiency in operating hand tools and equipment required for associated tasks. Basic Requirements: 3 plus years of experience installing integrated electronic security solutions in commercial environments. Must have a Valid Texas Alarm installer license. Must have a Valid Driver s License and own transportation. Must be able to pass a pre-employment drug screen. Must be able to work a flexible schedule. How to Apply: Apply Directly to this ad, call/text us at ************, email your resume to ************************* or drop by our office at 4001 Nations Dr. Pasadena, TX 77505 Monday - Friday 8 am to 5 pm #HOU04

Job Title: Subsea Controls Technician II Reports To: Controls Aftermarket Manager Summary: Trendsetter Engineering designs, builds, maintains and operates Multiplexed Electro -Hydraulic (MUX) Controls Systems for use on a variety of Trendsetter equipment, including intervention systems. Under minimal supervision, the individual would assist in the installation and testing of controls systems for subsea equipment in compliance with design and operating procedures and customer requirements. Working from written and verbal instructions, this individual performs mechanical, hydraulic and electrical assembly operations. These tasks require the use of electrical tools, mechanical hand tools, power tools and measuring devices along with review and adherence to Trendsetter job requirements and procedures. Duties and Responsibilities: · Installation and testing of subsea controls and equipment per specified procedures and quality requirements. · Conduct software and firmware installations, configuration of software for deployment or specific project applications. · Perform mobilization and de -mobilization process for the Sentinel Control Systems. · Operation of an overhead crane and a forklift properly and safely. · Assist in the operation of TEI or customer equipment as required. · Perform testing and troubleshooting of Subsea Communication Modules, Subsea Power and Communication Units, Electrical Power Units, Master Control Stations, Subsea Electronics Modules and Hydraulic Valve Packs. · Perform FAT's (Factory Acceptance Tests), EFAT's (Extended Factory Acceptance Tests), and SIT's (System Integration Tests) as required. · Perform diagnostic troubleshooting on failed electronics equipment of minor to moderate difficulty with multimeters, meggers, loop calibrators, etc. · Exhibit critical thinking skills in troubleshooting / diagnosing problems found with testing and controls equipment. · All other duties as assigned by management. Minimum Qualifications: · Periodic offshore deployment is required to global destinations totaling up to 180 days per year. · 3 -5 years' experience as a residential/commercial electrician or an electronics technician. · Must be a self -starter and able to work on tasks with minimal supervision. · Must possess a moderately advanced knowledge and application of hand tools. · Must be moderately advanced in the application of AC and DC electrical circuits and electrical theory. · Have a moderately advanced understanding of electrical risks and ESD awareness. · Must possess a moderately advanced understanding of wiring standards. · Must be able to solder with minimal supervision to IPC class 3. · Must possess a moderately advanced knowledge of communication protocols (RS232, RS485, MODBUS, TCP/IP, CANbus) and 4 -20mA devices and digital transducers. · Must possess a moderately advanced knowledge of EFLs and subsea wet mate/dry mate connectors. · Must be moderately advanced in operating hydraulic assemblies, HPUs, pressure testing and knowledge of fittings and controls fluid cleanliness. · Must possess a moderately advanced level of computer literacy. · Proficient in reading and understanding one -line diagrams, wiring diagrams, ladder diagrams, electrical schematics, hydraulic schematics, pneumatic schematics and piping / instrumentation diagrams. · Possess or obtain a valid US passport is required. · The ability to obtain travel visas to global destinations is required. · Must be able to pass an OGUK physical (or equivalent) as required. · Possess or obtain an International Certificate of Vaccination (Yellow Card) with vaccinations compliant with travel to designated global destinations as required. · Possess or obtain IADC certification (Well Control, Subsea Completions, Intervention). Work Environment: · Regularly required to stand, walk, bend, kneel, listen and speak. · Frequent need for manual dexterity - using hands, fingers, and arms to push, pulls, reach, grab, hold, and lift. · Ability to lift up to 40 pounds. · Regularly required to sit & stand for long periods of time. · Wear steel toe shoes, safety glasses and other Personal Protective Equipment as needed in safety zone areas.

Make your mark at the world's largest HVAC company Daikin Applied is seeking a full-time Controls Technician III. In this role, you will be responsible for installation, programming, and service of commercial building digital control systems. These responsibilities will increase based on exposure to tasks, ability to develop troubleshooting skill set, and consistent and accurate completion of assignments. The Building Automation Systems (BAS) you will be installing and servicing includes but is not limited to Daikin branded controls or third-party controls system. Come be a part of an exciting journey at Daikin Applied, where innovation and excellence drive our every endeavor! Location: Houston, TX- Onsite What you will do: Provide responsive and professional customer service with the goal of building and maintaining long-term customer relationships Identify, analyze, diagnose, and troubleshoot direct digital control systems Perform preventative maintenance, commissioning, and replacement modifications as needed or requested by customers Maintain building automation systems by inspecting trend logs, reports, schedules, applications, hardware, and programming Provide controls technical support to HVAC technicians Train and mentor less experienced technicians Create and/or implement programming and graphics for new installations and retrofit projects Commission controls installations and verify that control sequences meet scope, design, or specifications Record and report billing, inventory, timecards, technician tip reports, and other articles as required and in a timely manner Interact and train customers by offering status reports of service before, during, and after each call and explain technical information to both technical and non-technical audiences Participate in available training through regional technician trainers, off-site learning modules, and Daikin Learning. Maintain all required certifications and continue to develop new skill sets Ensure standards, policies, procedures, and maintenance of a clean work area are always upheld Follow all OSHA and Daikin Applied safety policies and procedures What's in it for you: Factory Certified Training, Online Training Courses, or other professional on the job training in the Building Automation and HVAC Industry The opportunity to work on all types of Building Automation Systems and cutting-edge technologies such as Intelligent Equipment Daikin Applied provides technicians with company vehicle, laptops, mobile devices, and other technologies The ability to make an impact and shape your career with a company that is passionate about growth The support of an organization that believes it is vital to include and engage diverse people, perspectives, and ideas to achieve our best The opportunity to work for a leading innovator in HVAC and Building Automation where you can make a difference in environmental initiatives to create a more sustainable world for all Minimum Qualifications: High School Diploma or GED Technical training and 5+ years of equivalent combination of education and experience Valid Driver's License and acceptable driving record Rotational Emergency Call Support as required Required license(s) and/or training card as required by local law district Work visa sponsorship is not available for this position Preferred Qualifications: Experience in BAS, HVAC, or related industry Proficiency with test instruments and calibration tools Competency in operation of engineering/commissioning tools, DDC controllers and field devices, BACnet protocol fundamentals Competency in the operation of HVAC equipment and controls Ability to read low voltage wiring diagrams and controls flow diagrams Niagara AX and/or Niagara 4 certification Experience with any common integration protocols such as: BACnet MST / IP, LON, Modbus TCP / RTU, Ethernet OIP, MQTT, or SQL Strong computer skills, including computer networking fundamentals OSHA 10 within 90 days of hire (Daikin provides this training during onboarding process) Current first aid / CPR card Benefits: Daikin Applied offers the following benefits for this position, subject to applicable eligibility requirements Multiple medical insurance plan options + dental and vision insurance 401K retirement plan with employer match Paid time off and company paid holidays Paid sick time in accordance with the federal, state and local law Tuition Reimbursement after 6 months of continuous service The typical hourly pay rate for this position ranges from $35.40 - $55.30 in Texas. Individual base pay will depend on a wide range of factors including your skills, qualifications, experience, and location. If you're looking for an engaging career with growth opportunities in a supportive environment, you'll love a career at Daikin Applied!

Essential Duties and Responsibilities: Read, understand, and interpret schematics, P&IDs, sketches, and written instructions to assemble parts or products as well as operations of equipment. Assembles and tests subsea production control system and drilling control HPUs, subsea distribution hardware & assemblies according to company, customer and industry specifications. Ensures that safety is of the utmost priority when operating, assembling and testing equipment. Participates in Deepsea Technologies Safety and Quality observation programs. Ensure that quality process and procedures are followed. Performs maintenance and operations of rental equipment both onshore and offshore. Performs fluid analysis on various types of control fluids and / or chemicals. Perform both High Voltage and Low Voltage terminations and diagnostics. Troubleshoots problems, identifies and communicates design discrepancies. Identifies and suggests design improvements. Completes required documentation, including but not limited to: daily progress reports, service tickets, test reports, failed test reports and Non-Conformance Reports. Prepares test procedures and operations / maintenance manuals in accordances with customer and industry standards and specifications Domestic and international travel required. Must have a valid passport. Perform various diagnostics tests on long electrical conductors and fiber optic cables. This may include TDR, OTDR, CR, IR, etc… Install Fiber Optic Connection end terminations. Requirements Education and Experience: 5+ years experience in assembling, operations and testing of HPUs for subsea production control and drilling control applications, subsea subsea distribution systems. Minimum of 2 years in an electrical service technician role offshore. High school diploma or GED; technical/vocational electrical training or related experience. Mid level of expertise in assembly and testing of Electro-Hydraulic Power and Control units, subsea distribution equipment and drilling control systems. Ability to read and interpret engineering drawings & BOMs, P&IDs; wiring diagrams and all written engineering procedures; Offshore safety and certification required. Ability to use a computer and Windows Office software. Job Knowledge, Skills and Abilities: Excellent communication skills and ability to work harmoniously on multifunction teams; Ability to balance customer demands against company constraints; Impeccable reputation and high ethical standards; Self-motivated and willing to take initiative with limited direction. Strong understanding of electrical operations and componentry Ability to operate forklifts and overhead cranes Physical Demands: Physical requirements are those typically found in an office and manufacturing shop environment. Must be able to pass an Offshore fit for duty physical. Personal Protective Equipment: Safety glasses and other PPE as required to work in a manufacturing environment. Additional PPE may be required at certain offshore and international locations.

BlueScope Coated Products is one of the largest coil coating companies in the United States, with facilities across the country. With more than four decades of expertise providing painted metal coils and toll processing services for industries in the construction and consumer product markets, we pride ourselves on delivering premium quality, reliable service, and ongoing innovation to our customers. Join our team today! BlueScope Coated Products is offering a $500 SIGN-ON BONUS! The position is a rotating work schedule and requires rotating (3) shifts every 4 weeks. 1st shift 5am-2pm, 2nd shift 1pm-10pm and 9pm-6am. Required Rotation. The Systems Technician shall perform maintenance-related support ensuring the production line produces a repeatable, high-quality product meeting internal and customer quality standard. This is accomplished through programming ladder logic systems to automate repetitive tasks, eliminating safety risks, and responsive troubleshooting when targets are missed. * Rewrite or modify PLC ladder logic programs to achieve the plant's Key Performance Indicators. Be the liaison and "change agent" between operators, leaders, and management's wants and needs with a safety mindset. * Evaluate machinery's PLC systems to ensure end-of-life items are prioritized for replacement before extensive downtime or impact on safety, throughput, or quality. These duties require managing capital projects and ROI calculations from statistical data. Act as project leader on new equipment procurement, installation, and commissioning. * Developing and reviewing Standard Operating Procedures (SOPs). Developing and organizing training material to transfer appropriate process/production and safety knowledge to associates. Train operations and maintenance users in new systems operations and maintenance activities. * Perform Safeguard techniques and document changes made to programs to prevent inadvertent loading of obsolete programs or complete loss from corrupted memory or files. Ensure all systems have secure protection protocols consistent with BlueScope standards. * Month-end reporting. Compile data for key maintenance performance indicators. Make recommendations for improvements based on data. * Assist with all safety issues related to production and ensure that safety goals are achieved. They are engaging associates in all aspects of safety, meetings, conversations, and incident reporting. * Create, evaluate, and revise preventive maintenance procedures that drive a reduction in unscheduled downtime, and increase reliability/predictability and consistent quality performance. Minimum: * Allen and Bradley RS Logix 5000 certification plus 1 year of Directly Programming (no assisting others) or 4 years solo programming and commissioning on multiple platforms. * Must be able to perform mathematical equations to program PLC such as slope, strip weight tension, coil diameter increase, and RPM to Feet per minute and scaling. * Maintain the ability to wear a respirator * Maintain the ability to drive a forklift Preferred * 2 years of mechanical background and experience to aide during PID tuning. Language Skills: The ability to read and comprehend documents including: safety rules, operating and maintenance instructions, procedure manuals and simple correspondence. Also, the ability to communicate information in small group situation's to other employees. Mathematical Skills: Ability to calculate figure's and amounts such as fractions, percentages, area, circumference and volume. Reasoning Ability: Ability to apply common sense understanding, to perform work instruction's that are furnished in written, oral and/or diagram form also, the ability to solve problems' that involve multiple variables' in a standard situation. Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to walk. The employee is occasionally required to stand; sit; bend; stoop; use hands to handle or feel objects, tools, or controls; reach with hands and arms; climb or balance. The employee will be required to be capable of lifting a minimum weight of 75 pounds. Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth perception. EEO Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability. Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

Job DescriptionDescription: We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of Houston, Texas and will report directly to the Manager of Automation & Controls Engineering. You'll make an impact by: System Integration & Commissioning Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines. Carrying out and validate cable schedules, control packages, and system testing protocols. Performing start-up and performance testing activities to confirm operational readiness and safety compliance. Project Execution & Handover Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met. Tracking and closing punch list items by documenting deficiencies and assisting with resolution. Providing troubleshooting support during early operational phases following system integration. Technical Contribution Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices). Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures. Helping maintain documentation control and reporting, ensuring accurate project records. Collaboration & Reporting Communicating progress and technical findings with project management and integration teams. Using tracking tools to update key milestones, risks, and solutions. Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements. Safely preparing, operating, and maintaining a motor vehicle for purposes of conducting company business You'll sweep us off our feet if you: Have strong analytical and have problem-solving abilities in automation and control systems. Are collaborative and effective working style with team members and contractors. Are proactive, self-motivated, and eager to take ownership of tasks. Are flexibile and able to adapt to shifting project requirements and deadlines. Have hands-on background in technical fields related to power generation, electrical construction, and commissioning. Are committed to safety, reliability, and operational excellence Requirements: What you'll need: 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls. Associate's degree (desired) in electrical, automation, or related technical discipline. Knowledge of microgrid operations, system integration, and applicable codes/standards. Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC Experience working across multiple stages of project execution. Physical ability to work in field environments, including adverse weather conditions, lifting up to 50 pounds, and performing physically demanding tasks. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

Our client in Katy, TX is seeking an experienced PLC Automation Technician to support, maintain, and troubleshoot automation and control systems used in industrial operations. This role ensures the reliable performance of PLCs, HMIs, and related automation equipment in both field and plant environments. Schedule: Monday-Friday, 7:00 AM-4:00 PM (1-hour break) Pay: DOE Key Responsibilities Assist in the installation, setup, and maintenance of PLCs and automation control systems. Troubleshoot and repair PLC hardware and software issues using platforms such as Siemens TIA Portal (preferred), Allen-Bradley ControlLogix, and Schneider Electric. Perform PLC program edits and updates as directed by the Field Supervisor or Engineering team. Support configuration, operation, and troubleshooting of Human-Machine Interfaces (HMIs). Conduct routine inspections, testing, and preventive maintenance on automation systems. Assist with commissioning, calibration, and performance testing of equipment at field sites. Maintain accurate control system documentation including schematics, wiring descriptions, and troubleshooting guides. Perform electrical and mechanical repairs on automation equipment (e.g., sensor replacement, wiring repairs, I/O module changes). Identify improvement opportunities related to safety, reliability, and efficiency. Ensure compliance with company safety policies and applicable industry standards. Provide on-site technical assistance and help train operations or maintenance staff on control systems.

HVAC Controls Technician Salary: $65,000 - $75,000 per year We are seeking a skilled and experienced HVAC Controls Technician to join our team. The ideal candidate will possess a strong background in troubleshooting, repairing, and installing direct digital control (DDC) systems, with a deep understanding of HVAC mechanical systems and electronics. Key Responsibilities: Troubleshoot, repair, and install DDC systems to ensure optimal performance. Provide engineering support for new construction projects and retrofits. Modify and optimize program algorithms for DDC systems. Collaborate effectively with sales teams, contractors, and customers to deliver control solutions and service support. Design and implement user-friendly front-end graphics for system interfaces. Analyze issues, diagnose problems, and resolve system malfunctions to maintain the functionality of automation systems. Coordinate and conduct training sessions for customers. Ensure timely completion of all assigned projects. Offer technical guidance and support to end-users and team members as needed. Qualifications: Completion of a vocational school program or an associate degree in electronics, mechanical systems, computer technology, or air conditioning; or a minimum of five years of relevant industry experience. Flexibility to work overtime and weekends, as required. Proficient in reading and interpreting wiring diagrams. Strong written and verbal communication skills. General understanding of IP networks. Occasional travel may be required. Familiarity with a variety of hand and power tools. Experience Requirements: At least 3 years of experience with LonWorks and/or BACnet Control Systems. Experience with ABB Cylone, Honeywell, Distech, JCI FX, TRIDIUM, and NIAGARA 4 is advantageous. Benefits: We offer a comprehensive benefits package, including: Competitive salary ranging from $65,000 to $75,000 per year. Paid vacation. Health, dental, and vision insurance. Short-term, long-term disability, and life insurance (STD/LTD/Life/AD&D). 401(k) retirement plan. Opportunities for continued education and professional development. Excellent career advancement potential. Emphasis on work-life balance. A supportive and collaborative company culture.

Job DescriptionDescription: Building Automation Service Technicians (BAS) Technician based in Houston, TX ACIS, Inc. is a thriving commercial mechanical services provider specializing in the commercial and industrial HVAC industry. With a robust client base in Texas, we are expanding our team and seeking an experienced and detail-oriented HVAC Controls Technician. If you're a dedicated professional with a strong Interest in HVAC, this is your opportunity to join a dynamic company poised for growth. UNLOCK YOUR POTENTIAL We are seeking a Building Automation Service Technician who has experience installing, troubleshooting & servicing of DDC Building Automation Systems. Minimum 3 years of related experience required. IP networking knowledge as well as various field-level communication system knowledge is required. Knowledge Tridium AX/N4 necessary and other brand system experience preferred. Technician Duties: · Diagnose and repair complex direct digital control system malfunctions requiring thorough knowledge of mechanical systems and electronic theory, as well as the ability to create & modify program algorithms for multiple systems. · Ability to effectively communicate with internal and external customers. · Candidate must be able to coordinate time and tasks effectively with assistance from the project coordinator. · Maintain detailed service report notes. · Create control algorithms, download source code to controllers, manage system databases, and implement an animated front-end graphical user interface when required. · Analyze problems and resolve issues to ensure the complete system functions properly. · Perform service repairs, adjustments and calibration on building systems. · Coordinate and perform customer training and ensure timely completion of project closeout documents. · Provide technical support and direction to end-users and employees when applicable. The Perks of Working Here ACIS, Inc. is committed to offering comprehensive benefits to our team members, including: · Medical, dental, vision, and disability insurance. · 401K with company match programs. · Paid vacation and holidays. · Company vehicles (driving positions only), cell phones, and equipment as needed. · Opportunities for on-the-job training and certifications to support your career growth. Our Guiding Principles At ACIS, Inc., we live by our core values: Honesty, Humility, Passion, Excellence, Teamwork, Growth Our commitment to diversity At ACIS, Inc., we're committed to creating a workplace that's as diverse as the world we serve. We thoughtfully embrace diversity and equal opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability. We believe that a diverse and inclusive environment makes us stronger as a company and a community. We encourage people from all backgrounds to apply, as we strive to create a welcoming and inclusive environment for all. Requirements:

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities · Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. · Assemble equipment per engineered drawings or as instructed by others. · Inspect completed components for accuracy and functionality. · Maintain an orderly work area. · Properly maintain company supplied tooling. · Aid in developing of new procedures and improving existing procedures. · Must understand and comply with all safety rules and company policies of Weatherford. · Work assignments carried out to the highest quality level. · Performs any assembly type functions, using hand or power tools. · May operate both stationary and moving overhead cranes. · Operates any equipment needed to perform job. Experience & Education REQUIRED · 1-2 years prior assembly or manufacturing experience · Mechanical aptitude. · Ability to read blueprints and wiring diagrams PREFERRED · Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED · Good verbal communication skills. · Basic computer skills · Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1

BlueScope Coated Products is one of the largest coil coating companies in the United States, with facilities across the country. With more than four decades of expertise providing painted metal coils and toll processing services for industries in the construction and consumer product markets, we pride ourselves on delivering premium quality, reliable service, and ongoing innovation to our customers. Join our team today! BlueScope Coated Products is offering a $500 SIGN-ON BONUS! The position is a rotating work schedule and requires rotating (3) shifts every 4 weeks. 1st shift 5am-2pm, 2nd shift 1pm-10pm and 9pm-6am. Required Rotation. The Systems Technician shall perform maintenance-related support ensuring the production line produces a repeatable, high-quality product meeting internal and customer quality standard. This is accomplished through programming ladder logic systems to automate repetitive tasks, eliminating safety risks, and responsive troubleshooting when targets are missed. Rewrite or modify PLC ladder logic programs to achieve the plant's Key Performance Indicators. Be the liaison and “change agent” between operators, leaders, and management's wants and needs with a safety mindset. Evaluate machinery's PLC systems to ensure end-of-life items are prioritized for replacement before extensive downtime or impact on safety, throughput, or quality. These duties require managing capital projects and ROI calculations from statistical data. Act as project leader on new equipment procurement, installation, and commissioning. Developing and reviewing Standard Operating Procedures (SOPs). Developing and organizing training material to transfer appropriate process/production and safety knowledge to associates. Train operations and maintenance users in new systems operations and maintenance activities. Perform Safeguard techniques and document changes made to programs to prevent inadvertent loading of obsolete programs or complete loss from corrupted memory or files. Ensure all systems have secure protection protocols consistent with BlueScope standards. Month-end reporting. Compile data for key maintenance performance indicators. Make recommendations for improvements based on data. Assist with all safety issues related to production and ensure that safety goals are achieved. They are engaging associates in all aspects of safety, meetings, conversations, and incident reporting. Create, evaluate, and revise preventive maintenance procedures that drive a reduction in unscheduled downtime, and increase reliability/predictability and consistent quality performance. Minimum: Allen and Bradley RS Logix 5000 certification plus 1 year of Directly Programming (no assisting others) or 4 years solo programming and commissioning on multiple platforms. Must be able to perform mathematical equations to program PLC such as slope, strip weight tension, coil diameter increase, and RPM to Feet per minute and scaling. Maintain the ability to wear a respirator Maintain the ability to drive a forklift Preferred 2 years of mechanical background and experience to aide during PID tuning. Language Skills: The ability to read and comprehend documents including: safety rules, operating and maintenance instructions, procedure manuals and simple correspondence. Also, the ability to communicate information in small group situation's to other employees. Mathematical Skills: Ability to calculate figure's and amounts such as fractions, percentages, area, circumference and volume. Reasoning Ability: Ability to apply common sense understanding, to perform work instruction's that are furnished in written, oral and/or diagram form also, the ability to solve problems' that involve multiple variables' in a standard situation. Physical Demands: While performing the duties of this job, the employee is regularly required to talk or hear. The employee is frequently required to walk. The employee is occasionally required to stand; sit; bend; stoop; use hands to handle or feel objects, tools, or controls; reach with hands and arms; climb or balance. The employee will be required to be capable of lifting a minimum weight of 75 pounds. Specific vision abilities include close-up and distance vision, color vision, peripheral vision, and depth perception. EEO Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability. Additional Information The preceding job responsibilities and tasks were designed to indicate the general nature and level of work performed by associates in this job. It is not designed to contain or be interpreted as a comprehensive inventory of all job duties and responsibilities required of associates assigned to this job. Associates may be required to perform other duties as assigned. Additional job competencies, individual goals, and performance measurements are set at the department level. The benefits are just as rewarding as the work at BlueScope. To support our goal, we offer a total compensation plan and an outstanding benefits package that includes health insurance, life insurance, short and long term disability, paid time off, and retirement. EEO: Employer/M/F/Disabled/Protected Veteran BlueScope is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, religion, color, national origin, sex, sexual orientation, gender identity, age, status, as a protected veteran, among other things, or status as a qualified individual with disability.

Full-time Description We are ERock! Enchanted Rock is a leader and innovator of Electrical Resiliency-As-A-Service. Our advanced dual-purpose microgrids protect companies, critical infrastructure, and communities from unexpected power outages, ensuring business continuity and civic durability. Enchanted Rock's dual-purpose microgrids use natural gas and renewable natural gas (RNG) to drive the nation's most dependable microgrids - all while producing significantly lower to zero carbon emissions than traditional diesel backup generators. Powered by GraniteEcosystem™, our revolutionary software system, Enchanted Rock solutions provide 24/7/365 monitoring, optimization, and forecasts to enable worry-free, reliable power for businesses. The Enchanted Rock solution brings together patented technologies, advanced dual-purpose microgrid designs and integrated end-to-end services. The Power is On and we keep it on. What you'll do… We are seeking a skilled Electrical Technician, Automation & Controls to support the integration, commissioning, and optimization of generator packages and electrical systems within advanced microgrid projects. This role is hands-on and dynamic, requiring expertise in automation, controls, and system performance to help ensure reliable, safe, and compliant operations. This is a field position based out of Houston, Texas and will report directly to the Manager of Automation & Controls Engineering. You'll make an impact by: System Integration & Commissioning Contributing to the integration of generator packages, switchgear, and electrical systems in line with project specifications, safety protocols, and timelines. Carrying out and validate cable schedules, control packages, and system testing protocols. Performing start-up and performance testing activities to confirm operational readiness and safety compliance. Project Execution & Handover Supporting the transition from construction to commissioning and operations teams by confirming integration requirements are met. Tracking and closing punch list items by documenting deficiencies and assisting with resolution. Providing troubleshooting support during early operational phases following system integration. Technical Contribution Assisting in troubleshooting automation, protection, and control systems (e.g., Schneider PLCs, DeepSea Controllers, ABB Relays, SEL devices). Participating in the development and delivery of training for site personnel and contractors on microgrid operations, controls, and start-up procedures. Helping maintain documentation control and reporting, ensuring accurate project records. Collaboration & Reporting Communicating progress and technical findings with project management and integration teams. Using tracking tools to update key milestones, risks, and solutions. Contributing to identifying risks and ensuring compliance with SHE standards, company protocols, and regulatory requirements. Safely preparing, operating, and maintaining a motor vehicle for purposes of conducting company business You'll sweep us off our feet if you: Have strong analytical and have problem-solving abilities in automation and control systems. Are collaborative and effective working style with team members and contractors. Are proactive, self-motivated, and eager to take ownership of tasks. Are flexibile and able to adapt to shifting project requirements and deadlines. Have hands-on background in technical fields related to power generation, electrical construction, and commissioning. Are committed to safety, reliability, and operational excellence Requirements What you'll need: 3+ years of experience in the energy sector (or equivalent electrical experience), with emphasis on power generation, automation, and controls. Associate's degree (desired) in electrical, automation, or related technical discipline. Knowledge of microgrid operations, system integration, and applicable codes/standards. Hands-on experience with control and protection equipment such as: Schneider PLCs, DeepSea 8660 & 8610 Controllers (or equivalent), or ABB 615 Relay, SEL 700G, SEL 700GT, SEL RTAC Experience working across multiple stages of project execution. Physical ability to work in field environments, including adverse weather conditions, lifting up to 50 pounds, and performing physically demanding tasks. Your Rewards! Medical, Dental, Vision, and Prescription Drug Insurance Company-Paid Life Insurance Flexible Spending Account (FSA) Health Savings Account (HSA) Wellness Programs and Incentives 401(k) Retirement Plan & Company Match Paid Time Off - Sick & Vacation Time Paid Holidays Do you have what it takes to join the Enchanted Rock team? Send us your resume today. Be yourself and keep it useful, funny, and cool! The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions. Enchanted Rock is committed to creating a diverse environment and is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, gender, gender identity or expression, sexual orientation, national origin, genetics, disability, age, or veteran status. At Enchanted Rock, we embrace diversity, including all the unique characteristics that make us human: race, age, sexual orientation, gender identity, religion, disability, and education - to name a few. We understand and recognize that diverse backgrounds and perspectives strengthen our teams and our business. The foundation of our diversity efforts is closely tied to our core values, specifically our value of “The Team”, which includes “Mutual Respect, Openness, and Honesty.”

Building Automation Service Technicians (BAS) Technician based in Houston, TX ACIS, Inc. is a thriving commercial mechanical services provider specializing in the commercial and industrial HVAC industry. With a robust client base in Texas, we are expanding our team and seeking an experienced and detail-oriented HVAC Controls Technician. If you're a dedicated professional with a strong Interest in HVAC, this is your opportunity to join a dynamic company poised for growth. UNLOCK YOUR POTENTIAL We are seeking a Building Automation Service Technician who has experience installing, troubleshooting & servicing of DDC Building Automation Systems. Minimum 3 years of related experience required. IP networking knowledge as well as various field-level communication system knowledge is required. Knowledge Tridium AX/N4 necessary and other brand system experience preferred. Technician Duties: · Diagnose and repair complex direct digital control system malfunctions requiring thorough knowledge of mechanical systems and electronic theory, as well as the ability to create & modify program algorithms for multiple systems. · Ability to effectively communicate with internal and external customers. · Candidate must be able to coordinate time and tasks effectively with assistance from the project coordinator. · Maintain detailed service report notes. · Create control algorithms, download source code to controllers, manage system databases, and implement an animated front-end graphical user interface when required. · Analyze problems and resolve issues to ensure the complete system functions properly. · Perform service repairs, adjustments and calibration on building systems. · Coordinate and perform customer training and ensure timely completion of project closeout documents. · Provide technical support and direction to end-users and employees when applicable. The Perks of Working Here ACIS, Inc. is committed to offering comprehensive benefits to our team members, including: · Medical, dental, vision, and disability insurance. · 401K with company match programs. · Paid vacation and holidays. · Company vehicles (driving positions only), cell phones, and equipment as needed. · Opportunities for on-the-job training and certifications to support your career growth. Our Guiding Principles At ACIS, Inc., we live by our core values: Honesty, Humility, Passion, Excellence, Teamwork, Growth Our commitment to diversity At ACIS, Inc., we're committed to creating a workplace that's as diverse as the world we serve. We thoughtfully embrace diversity and equal opportunity. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, or protected veteran status and will not be discriminated against based on disability. We believe that a diverse and inclusive environment makes us stronger as a company and a community. We encourage people from all backgrounds to apply, as we strive to create a welcoming and inclusive environment for all.

Job Purpose Responsible for planning, coordinating, and organizing work activities and resources necessary for manufacturing of products in accordance with cost, quality, and quantity specifications in manufacturing facility. Ensure that all customer orders meet requirements, delivery dates as well as quality and cost specifications. Enforce procedures and requirements in accordance with Weatherford policies while ensuring the safety and performance of all employees. Roles & Responsibilities * Under direct supervision, perform mechanical assembly of low complexity in accordance with established procedures. Know and understand Weatherford's Enterprise Excellence Process and the Quality Policy and comply with all requirements of the Quality Systems Manual, Operating and Technical Procedures and Workplace Instructions. * Assemble equipment per engineered drawings or as instructed by others. * Inspect completed components for accuracy and functionality. * Maintain an orderly work area. * Properly maintain company supplied tooling. * Aid in developing of new procedures and improving existing procedures. * Must understand and comply with all safety rules and company policies of Weatherford. * Work assignments carried out to the highest quality level. * Performs any assembly type functions, using hand or power tools. * May operate both stationary and moving overhead cranes. * Operates any equipment needed to perform job. Experience & Education REQUIRED * 1-2 years prior assembly or manufacturing experience * Mechanical aptitude. * Ability to read blueprints and wiring diagrams PREFERRED * Soldering Certification - IPC J-STD-001 Knowledge, Skills & Abilities REQUIRED * Good verbal communication skills. * Basic computer skills * Ability to read and comprehend simple instructions, short correspondence, and memos in English. #LI-KP1