Controls technician jobs in Fairmount, NY - 55 jobs

BHE GT&S is an interstate natural gas transmission and storage company that gives large customers more options in moving gas safely, reliably and efficiently. Headquartered in Richmond, Virginia, with operations in 10 states, BHE GT&S employees take pride in our work and are committed to innovative and sustainable natural gas energy solutions. Through our liquefied natural gas facilities, multi-state pipeline systems, and storage operations we support a number of large customers, including major utilities, power plants, marine transportation and heavy-duty trucking, along with manufacturing. Our employees are integral to our success and work hard to exceed customer expectations. We provide fulfilling employment opportunities, are committed to attracting and retaining the best employees, and focus on providing a safe and inclusive work environment. BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our Schenectady Transmission operations across the Mohawk Valley region of upstate New York, including Schenectady, Utica and New Hartford, NY. Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree. Instrument & Control Technician: * Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR * A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Required: Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months. Sr. Instrument & Control Technician: * Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR * A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. * Ability to lead project teams, assume project supervisor role and develop action plans. * Knowledge of Natural Gas and Electric Driven Gas Compressors. * Knowledge of Gas and Fire Detection Systems * Knowledge of Emergency Shut Down (ESD) Systems. Both levels: * Ability to interpret control system software for the purpose of diagnostic troubleshooting. * Ability to pass electrical, electronic, and digital equipment troubleshooting tests. * Ability to troubleshoot electrical, electronic, and pneumatic equipment. * Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams. * Ability to define specifications and requisition instrumentation and control equipment. * Ability to define problems, collect data and draw conclusions. * Ability to work independently and as a team member. * Ability to communicate effectively and develop rapport. * Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.) * Ability to operate personal computer. * Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems * Knowledge of electric driven compressors may be required. * Knowledge of electrical and electronic theory and principles * Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same. * Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS) * Knowledge of Variable Frequency Drives (VFD) * Knowledge of Human Machine Interface (HMI) * Knowledge of Ethernet Communications Equipment * Knowledge of Valves and Positioners * Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards * Knowledge of applicable regulatory requirements Preferences: It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job: * Knowledge of electronic, radio, digital, and remote-control theory. * Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.) * Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain. * Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints. * Ability to prepare technical reports and repair and maintenance records. * Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations. * Ability to directs and participates in installation of telecommunications equipment. * Ability to interpret and implement gas measurement and SCADA device installation specifications. * Ability to performs design programming installation and operation of electronic gas measurement and control systems. * Inspects and tests facilities and equipment to identify malfunctions. * Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment. * Ensures installations and equipment comply with regulations. * Ability to supervise MC&C projects. * Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities Education * Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.) Preferred Degree * Electronics & Communications Engineering * Preferred Licenses, Certifications, Qualifications or Standards: * ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months) CHAMPION: * Contribute to a team-centric work environment based on mutual respect and integrity * Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas. * Installation includes mounting wiring connecting testing configuring and programming instruments and devices. * Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center. * Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc. * Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities. * Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets. * Ensures regulatory and compliance standards are met.

BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our Schenectady Transmission operations across the Mohawk Valley region of upstate New York, including Schenectady, Utica and New Hartford, NY. RESPONSIBILITIES This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas. Installation includes mounting wiring connecting testing configuring and programming instruments and devices. Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center. Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc. Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities. Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets. Ensures regulatory and compliance standards are met. QUALIFICATIONS Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree. Instrument & Control Technician : Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months. Sr. Instrument & Control Technician : Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Ability to lead project teams, assume project supervisor role and develop action plans. Knowledge of Natural Gas and Electric Driven Gas Compressors. Knowledge of Gas and Fire Detection Systems Knowledge of Emergency Shut Down (ESD) Systems. Both levels : Ability to interpret control system software for the purpose of diagnostic troubleshooting. Ability to pass electrical, electronic, and digital equipment troubleshooting tests. Ability to troubleshoot electrical, electronic, and pneumatic equipment. Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams. Ability to define specifications and requisition instrumentation and control equipment. Ability to define problems, collect data and draw conclusions. Ability to work independently and as a team member. Ability to communicate effectively and develop rapport. Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.) Ability to operate personal computer. Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems Knowledge of electric driven compressors may be required. Knowledge of electrical and electronic theory and principles Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same. Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS) Knowledge of Variable Frequency Drives (VFD) Knowledge of Human Machine Interface (HMI) Knowledge of Ethernet Communications Equipment Knowledge of Valves and Positioners Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards Knowledge of applicable regulatory requirements Preferences : It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job: Knowledge of electronic, radio, digital, and remote-control theory. Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.) Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain. Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints. Ability to prepare technical reports and repair and maintenance records. Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations. Ability to directs and participates in installation of telecommunications equipment. Ability to interpret and implement gas measurement and SCADA device installation specifications. Ability to performs design programming installation and operation of electronic gas measurement and control systems. Inspects and tests facilities and equipment to identify malfunctions. Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment. Ensures installations and equipment comply with regulations. Ability to supervise MC&C projects. Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities Education Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.) Preferred Degree Electronics & Communications Engineering * Preferred Licenses, Certifications, Qualifications or Standards: ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months) CHAMPION : Contribute to a team-centric work environment based on mutual respect and integrity Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. ABOUT THE TEAM BHE GT&S is proud to be an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion or religious creed, age, national origin, ancestry, citizenship status (except as required by law), gender (including gender identity and expression), sex (including pregnancy), sexual orientation, genetic information, physical or mental disability, veteran or military status, familial or parental status, marital status or any other category protected by applicable local, state or U.S. federal law. Employees must be able to perform the essential functions of the position, with or without an accommodation. JOB INFO Job Identification 10003987 Job Category Pipeline Operations Posting Date 2025-12-19 Apply Before 2026-01-20T04:59:00+00:00 Job Schedule Full time Locations 1033 HIGBY ROAD, New Hartford, NY, 13413, US Travel Requirements Up to 25% Relocation Assistance Not currently offered for this position Business Eastern Gas Transmission and Storage, Inc. Compensation details: 32.84-44.38 PId532cdb7abbf-26***********5

Full-time Description Controls Technician will support the Plant Engineer with maintaining and troubleshooting the operations of a highly automated 24/7 manufacturing facility. Automated systems include food processing, refrigeration, filling, packaging, boiler, air generation and wastewater systems. This position will report directly to the Plant Engineer with support to the Maintenance Manager. Job Responsibilities: Ability to read and understand electrical wiring diagrams. Use Electrical AutoCAD for design purposes. Responsible for the commissioning, diagnosis, calibration, maintenance, and repair of environmental-control systems and processes, utilizing knowledge of electronics, direct digital control (DDC), airflow, hydronics, refrigeration theory, pH sensors, flow meters, electrical meters and system control techniques. Works with the Controls Engineer, Maintenance Personnel and plant personnel to keep all control systems, mechanical and electromechanical field devices operating according to the basis of design. Troubleshoot electrical controls related process issues Must be willing to work in all areas when needed Maintain safety standards of equipment and work area and perform all duties in a safe manner in accordance with the safety policies Able to work extended or flexible hours/shifts as required Electrical drawings, procedures, maintenance logs Reviews and updates all equipment records for history of preventive/predictive maintenance and service activities to ensure adequate maintenance schedule is in place Reports on status of assigned equipment maintenance and repair activities to supervisor Operate, maintain, and trend the Building Automation Systems (BAS) for the entire site Performs preventive maintenance, component replacement and corrections as needed Participates in structured group or team activities related to line/area performance improvement autonomous maintenance, housekeeping, problem solving Shares knowledge and develops maintenance skills in operator technicians Evaluate and provide input for assembly, tooling, and equipment prints for existing and new program changes Instrumentation troubleshooting and diagnosis, set up, and some calibration support and training for electricians including ownership of calibration methods Receives general supervision and exercises some discretion as to work details Responsible for completing projects tasks within time and budget constraints Work is reviewed for overall accuracy, completeness and soundness of technical judgment Requirements Essential Knowledge/Skills: Drive change with a positive attitude. Learns and interacts positively with the environment Willing to act in a changing environment PLC control systems, programming, integration, installation, upgrade and troubleshooting of one or more of the following Rockwell, Siemens, ABB or others. Initializing, modification, upgrade and troubleshooting of VFD including Rockwell, Parker, Lenze, Yokogawa, Reliance, Emerson, ABB Exercise technical, mechanical and control system aptitude / skills to accurately identify root causes for machine failures or breakdowns and the repair accordingly Instrumentations and controls debugging and troubleshooting Education/Experience: Associates degree in controls or electrical engineering technologies or equivalent experience. Minimum 3+ years working in manufacturing; Minimum 2+ years as a control's technician (or equivalent experience). Must be competent with CAD systems, Supervisory control systems, Ladder Logic and other programs that are specific to work environment Environmental Considerations: Must be able to work in environments with varying temperatures. Potential exposure to ingredients used in food manufacturing, including allergens. May encounter chemicals commonly used in food processing and distribution facilities. Physical Requirements: Ability to navigate all areas of the facility, including office spaces, warehouse areas, and the exterior perimeter. Must wear required personal protective equipment (PPE) as necessary to safely perform job duties. Ability to stand, sit, and carry out tasks throughout a full shift, with appropriate meal breaks. Physically capable of standing, bending, stooping, kneeling, reaching, twisting, lifting, pushing, pulling, climbing, balancing, and crouching as needed. Able to lift and move items weighing up to 50 pounds independently and heavier objects with reasonable accommodations. Visual acuity sufficient to perform job duties accurately. Capable of assessing weights, judging distances, and working at various heights. Work Schedule: Shift work is support of production with occasional overtime to trouble shoot or perform preventative maintenance. 12 hour shift with rotating weekends; 6am-6pm or 6pm-6am. Compensation: At Cayuga Milk Ingredients, we value a fair and comprehensive approach to compensation. Our wage range for this role is determined by various factors, including skill sets, experience, training, licensure, certifications, and organizational needs. It is not typical for an employee to start at or near the top of the range for the position. Compensation decisions are made based on individual job circumstances considering skill level, previous experience, and education requirements. Salary Description $31.89-$42.52 per hour

Troubleshoot automated systems issues associated with PLC's, A/C and DC drives Identify root cause of upsets, suggested course of action and manage corrective action measures/solution implementation Perform preventive, predictive maintenance as required Program various types of PLC'sSupport Safety, Quality, HPS and Cost goals and metrics Foster collaborative and supportive team environment through engagement efforts and leading by example Make necessary edits/redlines to schematics drawings and provide them to the engineering department for accurate documentation YOUR SKILLSMinimum of 5-10 years of direct experience in manufacturing environment conducting support and installation Associates degree in Controls or industrial maintenance preferred Completion of a formal apprenticeship program or equivalent combination of work experience and technical training required SCADA, Rockwell RS Logix, AMSCAllen Bradley, Siemens, and Other Legacy PLCsEthernet and Fiber Optic Communication SystemsSQL DatabasesSolenoid and Pneumatic ControlsInstrumentation and Process Monitoring

Troubleshoot automated systems issues associated with PLC's, A/C and DC drives Identify root cause of upsets, suggested course of action and manage corrective action measures/solution implementation Perform preventive, predictive maintenance as required Program various types of PLC's Support Safety, Quality, HPS and Cost goals and metrics Foster collaborative and supportive team environment through engagement efforts and leading by example Make necessary edits/redlines to schematics drawings and provide them to the engineering department for accurate documentation YOUR SKILLS Minimum of 5-10 years of direct experience in manufacturing environment conducting support and installation Associates degree in Controls or industrial maintenance preferred Completion of a formal apprenticeship program or equivalent combination of work experience and technical training required SCADA, Rockwell RS Logix, AMSC Allen Bradley, Siemens, and Other Legacy PLCs Ethernet and Fiber Optic Communication Systems SQL Databases Solenoid and Pneumatic Controls Instrumentation and Process Monitoring Required Citizenship / Work Permit / Visa Status US Citizen or Green Card Holder Must-Haves -5 Years of Direct Manufacturing Experience with Control Systems ( PLCs) -Rockwell / Allen Bradley , Siemens or other PLC - edit &troubleshoot -Ethernet / connectivity experience -SQL Database -Instrumentation and Process Monitoring

At Henkel, you'll be part of an organization that's shaping the future through innovation, sustainability and collaboration. With our trusted brands like Persil, 'all, Loctite, Snuggle, and Schwarzkopf and our cutting-edge technologies, you'll have countless opportunities to explore new paths and grow.This position is with our Consumer Brands business unit - where we empower our employees to bring the best Laundry & Home Care and Hair products to people around the world. Dare to learn new skills, advance in your career and make an impact at Henkel. Sign on Bonus $7,500 What you´ll do * Resolve issues with PLCs, A/C and DC drives, and related equipment. * Work with Allen-Bradley, Siemens, Modicon PLCs; update schematics and documentation. * Identify root causes, implement corrective actions, and ensure resolution. * Maintain equipment reliability and minimize downtime. * Work with operations and maintenance teams; promote safety, quality, and cost efficiency. What makes you a good fit * Associate degree in Controls or Industrial Maintenance preferred * 5-10 years in manufacturing automation and controls * PLC programming, SCADA, troubleshooting, AutoCAD, networking, instrumentation * Ability to work in non-climate-controlled environments, climb ladders, and lift as needed Some benefits of joining Henkel * Health Insurance: affordable plans for medical, dental, vision and wellbeing starting on day 1 * Work-Life Balance: Paid time off including sick time, vacation time and holiday time * Financial: 401k matching, employee share plan with voluntary investment and Henkel matching shares, annual performance bonus, service awards and student loan reimbursement * Family Support: 12-week gender neutral parental leave (up to 20 weeks for parents giving birth), fertility support, adoption & surrogacy reimbursement, discounted child and elderly care, and scholarships * Career Growth: skill development programs, promotional opportunities and tuition reimbursement * Local Benefits: Products giveaways, available, On-site cafeteria available for staff during designated hours and onsite Health Care Center for acute cared and uniforms including services provided. The salary for this role is $35.00- $42.00. This is the range that we in good faith anticipate relying on when setting wages for this position. We may ultimately pay more or less than the posted range and this range. This salary range may also be modified in the future. Henkel does not accept unsolicited resumes from search firms or employment agencies. Unsolicited referrals and resumes are considered Henkel property and therefore, Henkel will not pay a fee for any placement resulting from the receipt of an unsolicited referral. Henkel is an equal opportunity employer. We evaluate qualified applicants without regard to race, color, religion, sex, age, national origin, disability, veteran status, genetic information, and other legally protected categories. JOB ID: 25085050 Job Locations: United States, NY, Geneva, NY Contact information for application-related questions: ***************************** Please do not use this email address for sending your application or CV. To apply, please click on the "Apply for this role" button below. Applications sent via e-mail will not be accepted. Application Deadline: As long as the vacancy is listed on our Career Site, we are happy to receive your application Job-Center: If you have an application already, you can create or log in to your account here to check the status of your application. In case of new account creation, please use your email address that you applied with. Activate external content When clicking the button below external content will be loaded which involves transfer of personal data (e.g. IP address) to external servers. This may involve that cookies are set by the external content provider. Please see Data Protection Statement for further information. Accept for all YouTube content LOAD EXTERNAL CONTENT Deactivate loading external content from YouTube. How is work at Henkel About Henkel Building on a strong legacy of almost 150 years, we are leading the way to reimagine and improve life every day. Today and for generations to come. Through our innovative and sustainable brands and technologies, across our teams around the world. Henkel holds leading positions in both industrial and consumer businesses: Our portfolio includes well-known hair care products, laundry detergents, fabric softeners as well as adhesives, sealants, and functional coatings.

Belong. Believe. Be You. Belden. Propel your career surrounded by a diverse team of innovative, goal-oriented individuals who are pursuing the next generation of connectivity solutions. At Belden, you'll participate in work that will challenge you and position you to excel. You'll collaborate with colleagues from around the world, gaining exposure to a broad base of expertise and perspectives. Together, we'll continue on a journey of innovation, creating a connected world and paving the way for automation. Join us and let's build the future. Job Summary: The Automation Technician is responsible for the repair and maintenance of the automated assembly machines and process equipment. Regular work schedule will reflect Sunday - Thursday; 11:00PM- 7:30pm Applicants can expect a base compensation range of $25.00 - $32.00 per hour plus 10% differential for second or third shift. This is the reasonable estimate for this job based on applicable circumstances at the time of posting. Pay could be more or less than the posted range as permitted by law, and commensurate with the applicant's experience, qualifications, and geographical location. You will make a difference in the following ways: * Troubleshoots and repairs automated assembly and process equipment * Sets-up automated assembly and process equipment for specific production runs * Supports the production floor by answering equipment repair and trouble-shooting requests. This includes interacting with and gather information from Line Leaders and Machine Operators in a professional manner * Performs preventative or corrective maintenance on automated assembly systems, process, and ancillary equipment * Installs, sets-up, and rebuilds automation assembly and process equipment as required * Provides excellent internal customer service to the Machine Operators through quick response time, effective communication, and resolution of issues * Maintains the work area and equipment in a clean and orderly fashion, abiding by company rules and safety regulations * Maintains work schedule flexibility to perform necessary overtime and/or weekend work * Performs all other duties as assigned or required What you bring: * Education & Experience: High School Diploma or equivalent; Technical Certification or Vocational Training and three (3) years of related experience. * Knowledge: Strong mechanical aptitude and proficiency with electrical hand tools and precision measuring devices; Basic knowledge of Allen-Bradley PLC's, Rockwell Automation Software, Cognex Vision Systems, and Keyence Vision systems. Proficient computer skills to include Microsoft Office Suite and the ability to learn and use SAP * Specific Skills: Ability to identify and solve problems quickly while performing quality, accurate work under pressure. Ability to work effectively in a team environment in a culturally diverse workplace. * Customers Define Our Success: Provide support to the production floor, answer equipment repair and trouble-shooting requests to eliminate machine downtime and ensure continuous production. Let's Write the Next 100 Years Together. Join a global community striving to improve connectivity and security. The work we're doing puts our people on the front lines of impacting lives and shaping the future. Propel your story of innovation by helping Belden write the next chapter in ours. Shape your future at Belden. * ---- These statements are intended to describe the general nature and level of work involved for this job. It is not an exhaustive list of all responsibilities, duties and skills required of this job.

Job ID 246289 Posted 03-Nov-2025 Service line GWS Segment Role type Full-time Areas of Interest Building Management, Engineering/Maintenance, Facilities Management, Project Management CBRE is an equal opportunity employer that values diversity. At **CBRE Global Workplace Solutions (GWS)** , Safety is our top priority! We maintain a safety-first culture in which CBRE employees return home in the same condition in which they reported to work. We're looking for skilled and forward-thinking Mechatronics and Robotics Technicians to join our growing team as we work to service one of the world's largest online retailers. We offer competitive pay, a robust benefits package, wellness programs, and a workplace environment that embraces diversity. Come join our global network of professionals supporting client operations across CBRE. Looking for growth and career advancement? Upon completing six months of successful service, associates may explore career advancement opportunities within the organization! Read on to learn more! **About the Role** In this vital role, you will support the maintenance and operation of the building systems inside a client facility. You will repair, maintain, and continuously improve functionality of material handling equipment (MHE) and robotic systems throughout the facility. **What You'll Do** + Solve electrical and mechanical issues related to all MHE, including belts, motors, photo-eyes, relays, and more. + Install, maintain, and repair automated packaging and distribution equipment. + Complete and properly document preventative maintenance routines. + Track and store department inventory. + Cultivate positive working relationships with our Client and Operations Maintenance team members. + Perform other job-related duties as needed or assigned. **What You'll** **Need** + Applicants must be currently authorized to work in United States without the need for visa sponsorship now or in the future. + High school diploma or general education degree (GED). + 1 year of related experience and/or training. + Proficiency using computers and Microsoft Office Suite (Word, Excel, PowerPoint, Outlook, etc.). + Experience using powered or non-powered hand tools. + Ability to move up to 50lbs and physical requirements including stooping, standing, walking, and climbing stairs / ladders with or without reasonable accommodation. **Preferred Qualifications** + Associate's or higher degree from a vocational school or college with a focus in the mechanical or electrical field. + 2+ years apprenticeship or equivalent experience with electrical, mechanical, hydraulic and pneumatic systems. + Experience with MHE safety standards in accordance with Original Equipment Manufacturer (OEM) and Safety standards. + Experience with a Computerized Maintenance Management System (CMMS). + 2+ years' experience with automated conveyor systems and controls. + 2+ years' experience conducting predictive and preventative maintenance procedures. **CBRE Employee Benefits** + Comprehensive medical, dental, vision + Disability benefit program + 401k company matching + Paid time off and holidays + Company paid life insurance + Pet insurance + Paid parental leave **Why CBRE?** We invest in our employees' development. The core of our strategy is the view that development happens through three key activities: on-the-job learning, coaching and formal training. We provide employees with resources that support them in developing skills to enhance performance in their current role as well as for future roles. CBRE carefully considers multiple factors to determine compensation, including a candidate's education, training, and experience. The minimum salary for the position is $58,656 annually [or $28.20 per hour] and the maximum salary for the position is $62,816 annually [or $30.20 per hour]. The compensation that is offered to a successful candidate will depend on the candidate's skills, qualifications, and experience. **Equal Employment Opportunity:** CBRE has a long-standing commitment to providing equal employment opportunity to all qualified applicants regardless of race, color, religion, national origin, sex, sexual orientation, gender identity, pregnancy, age, citizenship, marital status, disability, veteran status, political belief, or any other basis protected by applicable law. **Candidate Accommodations:** CBRE values the differences of all current and prospective employees and recognizes how every employee contributes to our company's success. CBRE provides reasonable accommodations in job application procedures for individuals with disabilities. If you require assistance due to a disability in the application or recruitment process, please submit a request via email at recruitingaccommodations@cbre.com or via telephone at *************** (U.S.) and *************** (Canada). CBRE GWS CBRE Global Workplace Solutions (GWS) works with clients to make real estate a meaningful contributor to organizational productivity and performance. Our account management model is at the heart of our client-centric approach to delivering integrated real estate solutions. Each client is entrusted with a dedicated leader and is supported by regional and global resources, leveraging the industry's most robust platform. CBRE GWS delivers consistent, measurably superior outcomes for our clients at every stage of the lifecycle, and across industries and geographies. Find out more (******************************************************************************* CBRE, Inc. is an Equal Opportunity and Affirmative Action Employer (Women/Minorities/Persons with Disabilities/US Veterans)

BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our Schenectady Transmission operations across the Mohawk Valley region of upstate New York, including Schenectady, Utica and New Hartford, NY. Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree. Instrument & Control Technician: Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months. Sr. Instrument & Control Technician: Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Ability to lead project teams, assume project supervisor role and develop action plans. Knowledge of Natural Gas and Electric Driven Gas Compressors. Knowledge of Gas and Fire Detection Systems Knowledge of Emergency Shut Down (ESD) Systems. Both levels: Ability to interpret control system software for the purpose of diagnostic troubleshooting. Ability to pass electrical, electronic, and digital equipment troubleshooting tests. Ability to troubleshoot electrical, electronic, and pneumatic equipment. Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams. Ability to define specifications and requisition instrumentation and control equipment. Ability to define problems, collect data and draw conclusions. Ability to work independently and as a team member. Ability to communicate effectively and develop rapport. Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.) Ability to operate personal computer. Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems Knowledge of electric driven compressors may be required. Knowledge of electrical and electronic theory and principles Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same. Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS) Knowledge of Variable Frequency Drives (VFD) Knowledge of Human Machine Interface (HMI) Knowledge of Ethernet Communications Equipment Knowledge of Valves and Positioners Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards Knowledge of applicable regulatory requirements Preferences: It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job: Knowledge of electronic, radio, digital, and remote-control theory. Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.) Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain. Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints. Ability to prepare technical reports and repair and maintenance records. Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations. Ability to directs and participates in installation of telecommunications equipment. Ability to interpret and implement gas measurement and SCADA device installation specifications. Ability to performs design programming installation and operation of electronic gas measurement and control systems. Inspects and tests facilities and equipment to identify malfunctions. Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment. Ensures installations and equipment comply with regulations. Ability to supervise MC&C projects. Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities Education Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.) Preferred Degree Electronics & Communications Engineering *Preferred Licenses, Certifications, Qualifications or Standards: ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months) CHAMPION: Contribute to a team-centric work environment based on mutual respect and integrity Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas. Installation includes mounting wiring connecting testing configuring and programming instruments and devices. Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center. Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc. Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities. Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets. Ensures regulatory and compliance standards are met.

BHE GT&S has an exciting opportunity as an Instrument & Control Technician/Sr. Instrument & Control Technician supporting our Schenectady Transmission operations across the Mohawk Valley region of upstate New York, including Schenectady, Utica and New Hartford, NY. Two-year degree with a minimum of one year direct hands-on experience in instrumentation, PLCs and Computer Systems OR a minimum of four years direct hands-on experience in instrumentation, PLCs, and Computer Systems without a two-year degree. Instrument & Control Technician: Two-year or higher degree in electronics engineering or related field AND a minimum of one year direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of four years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Required : Must acquire ISA Certified Control Systems Technician (CCST) Level 1 certification within one year of ISA eligibility, not to exceed 15 months. Sr. Instrument & Control Technician: Two-year or higher degree in electronics engineering or related field AND a minimum of three years direct, hands-on experience with instrumentation, PLCs, and Computer Systems OR A minimum of seven years direct hands-on experience with Instrumentation, PLC's, RTUs and computer systems. Ability to lead project teams, assume project supervisor role and develop action plans. Knowledge of Natural Gas and Electric Driven Gas Compressors. Knowledge of Gas and Fire Detection Systems Knowledge of Emergency Shut Down (ESD) Systems. Both levels: Ability to interpret control system software for the purpose of diagnostic troubleshooting. Ability to pass electrical, electronic, and digital equipment troubleshooting tests. Ability to troubleshoot electrical, electronic, and pneumatic equipment. Ability to interpret installation specifications, wiring schematics, instrument drawings and component diagrams. Ability to define specifications and requisition instrumentation and control equipment. Ability to define problems, collect data and draw conclusions. Ability to work independently and as a team member. Ability to communicate effectively and develop rapport. Ability to operate diagnostic equipment (multimeter, calibrator, oscilloscope, etc.) Ability to operate personal computer. Knowledge of reciprocating and turbine engines, gas dehydration, measurement, environmental motoring, compression and supporting systems Knowledge of electric driven compressors may be required. Knowledge of electrical and electronic theory and principles Knowledge of Measurement devices (Press, Flow, Temperature, Moisture, Vibration, Speed, Density, Level) and ability to calibrate the same. Knowledge of Programmable Logic Controllers (PLC) and Distributed Control Systems (DCS) Knowledge of Variable Frequency Drives (VFD) Knowledge of Human Machine Interface (HMI) Knowledge of Ethernet Communications Equipment Knowledge of Valves and Positioners Knowledge of National Electric Code and National Bureau of Standards Transmitter calibration and tolerance standards Knowledge of applicable regulatory requirements Preferences: It is strongly preferred that the candidates have the additional knowledge, skills, and abilities to effectively perform the job: Knowledge of electronic, radio, digital, and remote-control theory. Knowledge of applicable regulations and standards (FCC, FAA, AGA, API, NEC.) Ability to carry equipment and parts (50 - 100 pounds) from vehicle to work site, possibly over rough terrain. Ability to interpret installation manuals, technical instructions, wiring, diagrams, and blueprints. Ability to prepare technical reports and repair and maintenance records. Ability to install, test, maintains and repairs equipment (electronic gas measurement telemetering microwave radio satellite equipment chromatographs etc.) to facilitate effective telecommunication gas measurement and remote-control operations. Ability to directs and participates in installation of telecommunications equipment. Ability to interpret and implement gas measurement and SCADA device installation specifications. Ability to performs design programming installation and operation of electronic gas measurement and control systems. Inspects and tests facilities and equipment to identify malfunctions. Troubleshoots problems replaces equipment/components and repairs calibrates and maintains equipment. Ensures installations and equipment comply with regulations. Ability to supervise MC&C projects. Ability to maintains interactive work relationship with Gas Measurement personnel Specialists and Engineers to accurately and effectively complete job responsibilities Education Associate (Typically two years of related, progressive work experience would be needed for candidates applying for this position who do not possess an associate degree.) Preferred Degree Electronics & Communications Engineering *Preferred Licenses, Certifications, Qualifications or Standards: ISA Certification (Required: within one year of ISA eligibility, not to exceed 15 months) CHAMPION: Contribute to a team-centric work environment based on mutual respect and integrity Support the Company's CHAMPION culture, which centers around personal responsibility, continuous improvement and delivering quality for our customers Employees must be able to perform the essential functions of the position, with or without an accommodation. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, disability or veteran status. Position descriptions are developed as guides for the employees of BHE GT&S. The management team of BHE GT&S reserves the right to modify job responsibilities and position requirements to meet the corporate business goals and needs. This role installs maintains and troubleshoots instrumentation control circuits and equipment related to natural gas processes such as the compression, dehydration, measurement, transmission and storage of natural gas. Installation includes mounting wiring connecting testing configuring and programming instruments and devices. Maintenance includes routine calibration and functional testing of process instruments and devices documentation of calibration data collected during inspections utilizing the instrument inspection monitoring system verification of data communication systems that provide real time process and alarm information to the facility control center. Troubleshooting includes the utilization of equipment such as a laptop computer multi-meter instrument/device communicator device software documenting process calibrator etc. Develops and maintains interactive work relationships to accurately and effectively complete job responsibilities. Directs advises instructs inspects supports and/or assists contractors and employees in the design construction operation and maintenance of assets. Ensures regulatory and compliance standards are met.

Advance your career with the Stark Tech team. We'll shape your future together! Stark Tech is a total optimization provider of facilities and energy solutions. Stark Tech leads the market in providing cutting-edge facilities and energy solutions. We integrate systems, offer energy-efficient equipment and services, and provide building analytics to help customers meet sustainability goals. Our large-scale equipment converts waste to renewable natural gas, reducing greenhouse gas emissions. Additionally, we enhance the utility grid with microgrid and battery energy storage solutions, along with solar development consulting services. Join Stark Tech to be part of the future of energy transformation. What you can expect We believe your well-being and satisfaction are vital for a fulfilling career. We are gritty, employee, and customer-focused. Here are some of the benefits we provide: Paid Time Off & Holidays 401(k) with employer match Medical/Dental/Vision insurance Health Savings Account (HSA) and Flexible Spending Account (FSA) HSA employer contribution Life and Disability insurance Wellness Program (participation incentives) Employee Assistance Program Competitive pay Career development How do you excel in this position The (HVAC) Controls Technician is responsible for the design, configuration, and operation of complete Temperature Control building control systems, and other low voltage control sub-systems to meet the intent of project requirements. What are we looking for Associates degree in Mechanical Engineering, Electronics, Electrical Engineering, Information Technology or equivalent. Two (2) years experience with mechanical and/or electrical engineering systems. Demonstrated knowledge of the construction or HVAC industry. Basic networking knowledge. Demonstrated knowledge of control theory, automatic temperature controls, building automation systems and other building systems. Demonstrated experience in the integration of low voltage building sub-systems using various industry protocols (i.e LON, BacNet, etc.). Operating knowledge of Microsoft office software and working proficiency with handheld devices, such as Smartphones, iPads, etc. Ability to communicate with customers and coworkers regarding inspection and service findings. Working with us Our fast-growing organization offers competitive pay, a positive work environment, and opportunities for career growth within the company. If you're a motivated individual with a sense of accountability, resiliency, and a dedication to providing exceptional customer service, we encourage you to get in touch with us.

Job DescriptionSalary: $22 - $29 / Hour Robison Contracting Incorporated (RCI) is a construction firm focused on Building Americas Infrastructure. Specifically, RCI is focused on the electric utility sector. We are developing a team of dedicated electrical technicians to help us commission and perform service and maintenance on Utility Scale Central Solar (PV) Inverters and Energy Storage Systems. RCIs founders are performance driven leaders looking to build our team around ourP.R.O.model.People,Resources, and Opportunity.RCI is always building the team with the right People. The right people buy into the culture, are competent, and take ownership of their work & community. RCI will provide paid training to technicians with an electrical background. This position will be 100% travel as we are building a dedicated team of specialists to travel to various project locations, perform their duties, and move on to the next. RCI technicians will work on multi-employer work sites and need to represent RCI's team and clients with the highest level of integrity and professionalism. It is not always the case, every project is different, however, technicians should be prepared to work long hours, with a potential to work more than 65 hours in a given work week. Qualified candidates shall be prepared to travel, have experience with troubleshooting electrical equipment, crimping data cables, software uploads, use a computer and use PPE properly around electrical equipment. Preferred Experience working in electrical utility/industrial environments: Minimum of a basic background in electrical equipment & distribution systems (120V to 480V); this should include proper training & use of PPE equipment for the systems being worked on. Prefer minimum of five (5) years experience working with electrical systems. Ability to diagnose & troubleshoot electrical systems, use multimeter, and test & make data cables. Job related technical knowledge of electrical systems such as panelboards, switchboards, generators, UPS systems, DC voltage systems, fire alarm systems, etc. Ability to communicate effectively with audiences that include but are not limited to customer, management, coworkers, clients, vendors, contractors, and visitors. Ability to attend to detail and work in a time-conscious and time-effective manner. Ability to use/develop troubleshooting techniques for various electrical/mechanical systems in both standard and high-stress situations. Other Job Requirements Tasks will include physical labor; examples include working on ladders, ability to carry minimum 65lbs, use of PPE equipment, ability to obtain forklift/manlift operators license, etc. Working conditions include various levels of environmental conditions including but not limited to generally favorable indoor workspace, outdoor workspaces, moving mechanical parts and vibration; high, precarious places, fumes or airborne particles and extreme temperatures and high noise levels. Travel to required location. Travel will vary depending on the project and location.For most, this is a 100% travel position. Preferred Qualifications OSHA 10 or higher. Obtained TWIC. PowerSafe Training for Electrical Utilities. Must have good verbal and written English communications skills. Work effectively with multi-cultural personnel to execute work assignments. Strong interpersonal and mentoring skills and organizational accountability processes Good multi-tasking skills Proficient in MS-Office programs or G-Suite RCI is a Drug Free Workplace, all applicants should be aware RCI's customers often require a drug test prior to working on their project site. RCI technicians could be drug tested multiple times in a given year. RCI may also require a background check prior to submitting an offer. RCI is an equal opportunity employer that recognizes the value of a diverse workforce. All qualified individuals will receive consideration for employment without regard to race, color, age, sex, sexual orientation, gender identity, religion, national origin, disability, veteran status, genetic information, or any other criteria protected by federal, state, or local law.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency ("RF") components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards ("PCBs"). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** The Primary responsibilities of this job profile include: Performing maintenance, testing, troubleshooting, calibration and repair on a variety of circuits, components, analytical equipment and instrumentation for laboratory and manufacturing equipment. Analyzing results and developing or supporting the development of test specifications and electrical schematics. Maintains spare parts inventory. May prepare technical reports with recommendations for solutions to technical problems. Scope: Responsible for the calibration, routine inspection, testing, maintenance and repair of instruments, meters, gauges and other testing and measuring equipment. Work with little or minimal supervision to perform the following duties: Duties: Responsibilities: * Perform calibration and testing of various types of equipment and instruments (Electronic, Pressure, Temperature) * Follow established procedures and guidelines to ensure accurate and reliable results * Troubleshoot and diagnose issues with equipment and make necessary adjustments or repairs * Maintain calibration records and documentation in accordance with quality standards * Collaborate with team members to improve calibration processes and procedures * Provide technical support and assistance to customers as needed * Adhere to safety protocols and maintain a clean and organized work area Job Knowledge, Skills and Abilities: * Must have excellent PC skills, proficiency in the use of most Windows based software, both stand-alone software as well as equipment based. This includes, but is not limited to Word, AutoCAD, Excel, Project, and other standard programs. * Good verbal and written skills with an excellent command of the English language. * Must work well with all levels of the organization and have the ability to train others and work as a member of inter-disciplinary teams. * Ability to learn 70+ instrument calibrations * Must have technical writing experience * Proven track record of updating, revising, and enhancing SOP's * Ability to read and interpret technical manuals, schematics, and blueprints * Excellent attention to detail and problem-solving skills * Ability to work independently and as part of a team * Ability to lead small projects both inside and outside calibration * Perform vendor negotiations for new equipment * Schedule outside vendors for onsite calibrations * Ability to learn how to write new programs within our calibration software * Provide support for audits * Proficiency in data analysis and structured problem solving including publishing and documenting the results is preferred. * Ability to adapt and learn new skills due to continually changing work environment. * A self-starter with the ability to work without direct supervision and a sense of urgency to meet production goals and customer expectations. * Strong attention to details. Education: Associate Degree in Electrical, Electro-Mechanical or Mechanical Engineering Required Work Experience: 0-2 years of experience in manufacturing environment Additional Job Description * Acquires job skills and learns company policies and procedures to complete routine tasks. * Works on assignments that are routine in nature, requiring limited judgement. * Has little or no role in decision making. * Normally receives detailed instructions on all work. * Works under close supervision. * Typically expects less than 1 year of related experience. #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $48,263 - $76,287 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

TTM Technologies, Inc. - Publicly Traded US Company, NASDAQ (TTMI) - Top-5 Global Printed Circuit Board Manufacturer About TTM TTM Technologies, Inc. is a leading global manufacturer of technology solutions including engineered systems, radio frequency (“RF”) components and RF microwave/microelectronic assemblies, and quick-turn and technologically advanced printed circuit boards (“PCBs”). TTM stands for time-to-market, representing how TTM's time-critical, one-stop manufacturing services enable customers to shorten the time required to develop new products and bring them to market. Additional information can be found at *********** The Primary responsibilities of this job profile include: Performing maintenance, testing, troubleshooting, calibration and repair on a variety of circuits, components, analytical equipment and instrumentation for laboratory and manufacturing equipment. Analyzing results and developing or supporting the development of test specifications and electrical schematics. Maintains spare parts inventory. May prepare technical reports with recommendations for solutions to technical problems. Scope: Responsible for the calibration, routine inspection, testing, maintenance and repair of instruments, meters, gauges and other testing and measuring equipment. Work with little or minimal supervision to perform the following duties: Duties: Responsibilities: Perform calibration and testing of various types of equipment and instruments (Electronic, Pressure, Temperature) Follow established procedures and guidelines to ensure accurate and reliable results Troubleshoot and diagnose issues with equipment and make necessary adjustments or repairs Maintain calibration records and documentation in accordance with quality standards Collaborate with team members to improve calibration processes and procedures Provide technical support and assistance to customers as needed Adhere to safety protocols and maintain a clean and organized work area Job Knowledge, Skills and Abilities: Must have excellent PC skills, proficiency in the use of most Windows based software, both stand-alone software as well as equipment based. This includes, but is not limited to Word, AutoCAD, Excel, Project, and other standard programs. Good verbal and written skills with an excellent command of the English language. Must work well with all levels of the organization and have the ability to train others and work as a member of inter-disciplinary teams. Ability to learn 70+ instrument calibrations Must have technical writing experience Proven track record of updating, revising, and enhancing SOP's Ability to read and interpret technical manuals, schematics, and blueprints Excellent attention to detail and problem-solving skills Ability to work independently and as part of a team Ability to lead small projects both inside and outside calibration Perform vendor negotiations for new equipment Schedule outside vendors for onsite calibrations Ability to learn how to write new programs within our calibration software Provide support for audits Proficiency in data analysis and structured problem solving including publishing and documenting the results is preferred. Ability to adapt and learn new skills due to continually changing work environment. A self-starter with the ability to work without direct supervision and a sense of urgency to meet production goals and customer expectations. Strong attention to details. Education: Associate Degree in Electrical, Electro-Mechanical or Mechanical Engineering Required Work Experience: 0-2 years of experience in manufacturing environment Additional Job Description • Acquires job skills and learns company policies and procedures to complete routine tasks. • Works on assignments that are routine in nature, requiring limited judgement. • Has little or no role in decision making. • Normally receives detailed instructions on all work. • Works under close supervision. • Typically expects less than 1 year of related experience. #LI-MP1 Compensation and Benefits: TTM offers a variety of health and well-being benefit programs. Benefit options include medical, dental, vision, 401k, flexible spending and health savings accounts, accident benefits, life insurance, disability benefits, paid vacation & holidays. Benefits are available on the 1st of the month following date of hire. For some positions, only PTO and holiday benefits are offered. Compensation ranges for roles at TTM Technologies varies depending on a wide array of factors that are considered in making compensation decisions including but not limited to skill sets; experience and training; certifications; and other business and organizational needs. The disclosed range estimate has not been adjusted for the applicable geographic differential associated with the location at which the position may be filled. At TTM Technologies, it is not typical for an individual to be hired at or near the top of the range for their role and compensation decisions are dependent on each individual set of circumstances. A reasonable estimate of the current range is: $48,263 - $76,287 Additional compensation: An annual or quarterly company bonus may apply based on position assignment. Positions hired for alternative shift may be eligible for a shift premium based on the assigned shift and location. Export Statement: Must comply with TTM Export Control Policies and Procedures and all applicable laws including ITAR, EAR and OFAC including but not limited to: a) being able to identify ITAR product on the manufacturing floor and understand that access to these products and related technical data is restricted to only US Citizens and US Permanent Residents; b) recognition of Foreign Person visitors by badge differentiation; c) understand and follow authorization procedures for bringing foreign visitors into facilities (VAL); d) understand the Export and ITAR requirements for shipments leaving the US; e) manage vendor approvals for ITAR manufacturing and services. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, citizenship, disability or protected veteran status.

A subsidiary of UGI Corporation, UGI Energy Services supplies and markets natural gas, liquid fuels, renewable natural gas, and electricity to 42,000 customer locations across the Mid-Atlantic and Northeastern US. We are a supplier, marketer, and midstream services provider - one backed by 135 years of natural gas experience, plus our own expanding energy infrastructure. Along with buying and selling energy commodities at the wholesale level, UGIES owns and operates key midstream natural gas assets. Hourly Rate This job posting is open from December 24, 2025 to January 16, 2026. The hourly rate for this position ranges from $27.00 to $32.00, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works. Job Summary The Renewable Natural Gas Technician I is responsible for the maintenance and operations of UGIES RNG Facilities. Troubleshoots, inspects, maintains, and repairs equipment such as valves, controllers, pumps, compressors, boilers, and generators. Performs daily inspections of all equipment and performs routine maintenance. Responsible for completing preventative maintenance and compliance related paperwork. **Seeking someone that lives in the Courtland, NY or Homer, NY area or within 45 minutes from there.** Duties and Responsibilities Develop a comprehensive understanding of UGIES RNG facilities and related dairy operations. Inspect, maintain, and operate facilities in a safe, reliable, and efficient manner. Maintain a working knowledge of instrumentation and control equipment. Maintain a working knowledge of electrical systems. Record and analyze daily readings to ensure facility is operating efficiently. Plan, organize, and prioritize assigned responsibilities and coordinate with employees and contractors. Serve as a point of contact for related dairy farm operators. Prioritize and complete all regulatory and environmental compliance requirements. Coordinate and communicate with outside parties including landowners, contractors, and utilities operators. Assist with oversight of construction of new RNG projects. Assist with M&R station maintenance and compliance tasks when required. Respond to afterhours call outs. Maintain required Operator Qualifications to perform duties. Comply with UGIES safety policies and procedures. Assist any other departments if needed. Perform other job-related duties as required. Knowledge, Skills and Abilities Experience working with regulated commodities, specifically propane and natural gas. Strong mechanical and electrical aptitude with the ability to learn and perform operation and maintenance tasks associated with various types of facilities and equipment. Professional, reliable, self-directing work habits. Proficiency with computers including MS Office applications such as Excel and Outlook as well as other computer-based work training, time reporting, expense reporting, and on-line work applications and documentation. Knowledge of dairy farm operations, specifically digesters. Ability to adapt to changes such as types of equipment used, software platforms, and company procedures. Ability to become a key member of a team by possessing strong communication skills, highly adaptable, responsible, and respectful. Ability to read and understand verbal/written instructions and signage in English. Ability to communicate with others in English. Ability to speak a second language, a plus. Education and Experience High School Diploma or G.E.D. required. 2 years of industry related experience. Excellent organizational skills. Excellent written and verbal communication skills. Demonstrated self-starter with the ability to work independently and exercise good judgement. Valid driver's license with demonstrated safe driving record. UGI Energy Services, LLC is an Equal Opportunity Employer. The Company does not discriminate on the basis of race, color, sex, national origin, disability, age, gender identity, sexual orientation, veteran status, or any other legally protected class in its practices. The pay for this position ranges from $52,500.00 to 69,700.00, depending on circumstances including an applicant's skills and qualifications, certain degrees and certifications, prior job experience, market data, and other relevant factors. Additional compensation includes eligibility to earn a performance-based bonus or commissions on completed sales. This is the Company's good faith and reasonable estimate of the range of compensation for this position as of the time of posting. The Company offers a wide array of comprehensive benefit programs and services including medical, dental, vision, flexible spending and health savings accounts to our benefits-eligible employees. Additional benefits include retirement savings plans like 401(k) and paid days off such as parental leave, military leave, vacation/paid time off, sick leave in compliance with state law, as applicable, paid holidays, and disability coverage. Some benefits offerings are subject to any legal requirements or limitations, employee eligibility status, and where the employee lives and/or works.

WHO WE ARE Baldwin Richardson Foods is focused on enriching the flavor of life. As a full-service liquid products supplier and strategic partner to the food and beverage industry, Baldwin Richardson Foods combines its formulation expertise and unique packaging options with robust processing capabilities to produce high-quality sauces, toppings, syrups, fillings, and shelf-stable beverages for the world's most iconic Quick Service Restaurants (QSRs), Consumer Packaged Goods (CPG) brands, and food service companies. Its state-of-the-art Innovation & Culinary Center transforms trends and culinary inspiration into legendary products through an award-winning commercialization process. The company also manufactures and markets Mrs. Richardson's dessert sauces and Nance's mustards/condiments in addition to producing finished goods for the private label sector. BRF maintains its headquarters and a manufacturing facility in Macedon, New York; with a Culinary Innovation Center in Westmont, Illinois; and offices and manufacturing facilities in Williamson, New York; Pennsauken, New Jersey; and Corona, California. This role will be located in Williamson, NY. WHAT WE NEED As an Electromechanical Technician under minimal supervision, you will perform advanced troubleshooting, repair, modification, installation, and preventative maintenance on electromechanical and electrical systems, instrumentations, and PLCs utilizing standard work practices, to ensure production is supported in a safe and efficient manner Our Maintenance Department operates on a 2-2-3 shift schedule, providing a consistent rotation for work-life balance. Sample schedule below: Week 1: Work Monday, Tuesday; Off Wednesday, Thursday; Work Friday, Saturday. Week 2: Off Monday, Tuesday; Work Wednesday, Thursday; Off Friday, Saturday; Work Sunday. Shift Hours: 6AM-6:30PM WHAT YOU WILL DO Following Good Manufacturing Practices (GMP) will support safety programs and policies to safeguard personal safety, product safety, company property, environmental and team member's safety. Complete preventative maintenance on all equipment to maximize efficiencies and limit downtime. Support continuous improvement efforts by providing equipment and process expertise. Troubleshoot and repair all plant-related electrical components including motors, servos, VFD's, and PLC's. Leverage electrical expertise to support troubleshooting of process and support equipment. Maintain electrical systems through execution of preventive maintenance programs. May be involved with providing technical support to Operations Team for training and staff development (i.e., cross training production personnel for first level-maintenance activities) WHAT YOU NEED TO BE SUCCESSFUL HS Diploma required; two-year associate degree, licensing, or equivalent trade school technical training in related field highly preferred, but applicable experience will be considered in lieu of licensing or education. A minimum of three (3) years of electrical and electromechanical maintenance and troubleshooting experience (manufacturing, automotive, farming) is required. Experience troubleshooting to identify root-cause issues on electrical equipment or components. Experience in food and/or pharmaceutical manufacturing, specifically working to meet GMP, OSHA, FDA, EPA standards is preferred. Proficiently reading and interpreting electrical schematics, Electrical, Instrumentation, Electronics/Controls. Ability to use more complex analytical and measuring tools for vibration analysis, torque requirements and tolerances. Proficiency with hand, portable power, and shop tools in the maintenance of manufacturing equipment is required. Provide feedback and modification of PM's based on observations. Provide feedback on the overall health of machine centers. Able to use voltmeter and megger. Able to read ladder logic to diagnose production issues. Able to identify and replace faulty common electrical components (fuses, motors, photoeyes, relays, light ballast). Able to replace frequency drives and program. Familiar with HMI software and communication protocols. Familiarity with Fillers, Cappers, Case Packers, conveyors, tanks, and pumps. Experience in the following areas is advantageous and could warrant a higher starting pay rate: Ability to write ladder logic or modify Ability to replace, modify HMI software and hardware Use of more complex electrical tools (oscilloscope, data logger) Well-rounded in all Allen Bradley software Willingness to dig into the root-cause of failures, and ensure the repair is done through to completion. Must be willing and able to work overtime, including off-shift, weekends and holidays when required to support the production schedule. Experience utilizing a CMMS system is preferred. At BRF, base pay is one part of our total compensation package and is determined within a range. Your base pay will depend on your skills, qualifications, and experience. You'll also receive a comprehensive benefits package including a low premium and out of pocket cost medical, dental and vision coverage, 401k with company match, generous sick and vacation time, 9 paid holidays, birthday and floating holidays, volunteer time and more!

Preferred qualifications/experience Associates Degree in Applied Sciences preferable Electrical Engineering Technology Electrical Engineering Science 5 years equivalent experience in related field. Industrial vacuum application Controls / PLC experience Process instrumentation experience Responsibilities Calibrate all equipment under the responsibility of the Instrument Department. Interpret and analyze abnormalities in various instruments. Aid Maintenance in location problems such as: troubleshooting complex electrical systems, motor drives, hydraulic controls, rectifiers, power supplies and water-cooling systems. The Instrument Technician's expertise in these areas is important to ensure that equipment downtime is minimized. Perform temperature surveys on heat treat ovens. This involves working with Maintenance and Production to prepare the oven, execute the survey and recording the temperature data per SMC procedures. Install new or modify existing instrumentation and equipment as directed by the Instrument Supervisor, Facilities Engineers and/or under the guidance of the Instrument Specialist. Layout and construct electronic circuits working from schematics and, if necessary, make modifications to enable the circuit to function properly. Maintenance and operation knowledge of computers and programmable logic controllers. Answer questions and/or instruct personnel on the use and operation of new instruments and control equipment. Interpret recording devices and meter indications for an operator or foreman to assist in the decision related to equipment problems. Provide overall technical and service support to all SMC production, processing or research equipment as directed by the Instrumentation Supervisor, Engineering, and/or under the guidance of the Instrument Specialist. Maintain the daily log to document instrumentation work and to insure continuity of work between the shifts. Maintain a safe working area, promote and implement good housekeeping practices. In addition to these duties, the Instruments Specialists shall have the following accountabilities: Perform periodic calibration of secondary standards traceable to NIST and record calibrations per SMC procedures. Design modifications to improve existing equipment and provide updated documentation to Engineering Maintenance understanding of new equipment and technology as it is applied in the plant. This includes equipment such as computes, machine controls, and instruments. Develop and write software for programmable logic controllers as directed by Engineering. Install new equipment as directed by the Instrumentation Supervisor or Engineering. Oversee the Instrument Department when the Instrument Supervisor is not present. This includes planning and scheduling work for the Instrument Technicians. Desired Skills Experience with PLC, primary GE and Rockwell software. Ability to read and interoperate electrical, mechanical and hydraulic prints and schematics. Experience with various electronic test equipment such as multimeters, oscilloscopes and voltage/current sourcing equipment. Knowledge of DC drives and Variable frequency drives. Ability to manage own workload with minimal oversight.

About Advanced Atomization Technologies Advanced Atomization Technologies (AA TECH) is a joint venture between Parker Aerospace and GE Aerospace, created to produce and support advanced fuel nozzles and related products for current and future commercial engine platforms, including aerospace and aero-derivative engines. The highly skilled and experienced team of AA TECH employees is expert in design, assembly, testing, and aftermarket support, providing our customers with a world-class product and support experience. AA TECH offers a comprehensive and competitive compensation and benefits package, including: Variable Incentive Plan (Bonus Eligibility) Health, Dental, and Vision Insurance with HSA Company Contribution 401k Plan with Employer Match Tuition Reimbursement 12 Paid Holidays Vacation Accrual Position Summary: The Quality Calibration Technician performs scheduled NIST traceable calibrations on manual and equipment gages that are identified in a Gage Tracking System to assure the gage is fit to accept or reject product. Some examples of manual and equipment gages requiring calibration are micrometers, drop indicators, pin gages, dial calipers, thread gages, flow test stands, pressure gages, temperature gages, flow meters, etc. The Quality Calibration Technician will be responsible for some and/or a combination of the key responsibilities below. Key Responsibilities: Perform calibrations on various manual and equipment gages. Assist Engineering and Maintenance on troubleshooting equipment gages (as needed) Manage the inputs and outputs of the electronic Gage Tracking System Ensures Metrology Lab temperature and humidity is documented daily. Perform 1st article inspection and receiving inspection. This includes the use of a high precision contact (CMM) and non-contact (Vision system) Metrology equipment. This will include programming measurement strategy. Ensure all relevant data used for Calibration Metrics are accurate and up to date. Participate in Continuous Improvement Activities Collect monthly calibration fluid samples, this may include performing fluid testing Input relevant data used for Calibration Metrics Perform inspections used for Gage R&R, Process Capability and Engineering Studies (as needed) Participate in other quality functions such as Internal & 3rd Party Auditing, PDCA's & CAR's (as needed) Manage Lost/ Missing Gages List - including communication to various disciplines within the facility. Manage 3rd party calibration logistics. Creating/ updating calibration procedures and instructions (as needed) Responsible for working with production to minimize downtime - this includes manual and equipment gages. Administer the rejected gage product impact assessment process. Required Qualifications: Associate of Science (AS) degree and/or 3 plus years of related experience Proficient in the use/programming of CMM Strong understanding of ASME Y14.5 Proficiency in comprehending technical drawings (Including GD&T) and written work instruction(s) MS Office competency (Outlook, Word, Excel, PowerPoint) Strong organizational and communication skills Self-Starter who is motivated by external and internal customer satisfaction and favorable metrics. Detail and results oriented Ability to adapt to changing priorities Must pass onsite visual acuity test Desired Qualifications: Proficient in the use and programming of Vision Systems Basic manufacturing environment knowledge Safety and Compliance minded. A comprehensive understanding of AS9100/ ISO 9001, ISO17025, including auditor experience. Prior inspection experience Compile Capability, Gage R&R studies using software (i.e. Minitab or similar) Due to the company's military contractor status, the applicant must be a U.S. citizen or a permanent resident of the United States and must provide evidence of citizenship or immigration status upon applying for the position. Advanced Atomization Technologies, LLC is an equal opportunity employer and gives consideration for employment to qualified applicants without regard to race, color, religion, sex, sexual orientation, age, national origin, disability, protected veteran status, or any other consideration made unlawful by federal, state, or local laws. (“Minority/Female/Disability/Veteran/VEVRAA Federal Contractor”) Typical Mental and Physical Demands: While performing the duties of this job, the employee may be required to sit. The employee frequently is required to use hands to operate a computer. The employee is occasionally required to stand and walk. Specific vision abilities required by this job include close vision. Also expected of the employee is regular attendance, the ability to work cooperatively and professionally with others and members of the public, and the ability to manage multiple tasks at once. (The essential functions have been provided as examples of types of work performed by employees assigned to this job classification. The Company reserves the right to modify the work assignments and/or to make reasonable accommodations so that qualified employees can perform the essential functions of the job. The physical and mental demands described above are representative of those required to successfully perform the essential functions of this job.) In addition to the key responsibilities listed above, this position requires successful completion of all other duties assigned by management.

is 100% on-site in Cortland, NY To provide installation, troubleshooting, and maintenance support for Avaya PBX and key telephone systems in multiple locations. Performs installation of telephone and computer network wiring, and telephone equipment. makes modifications to programs in the Avaya PBX as necessary to facilitate daily changes and additions to telephone equipment. Education, License & Cert: Two‐year degree in telecommunications related field with at least two years of technical experience, or four years of technical experience. A valid driver's license is required. Experience: Experience should consist of work directly related to programming and maintaining Avaya PBX systems, Avaya key equipment, and installing voice/data wiring. Knowledge of computer network equipment preferred. Must have strong interpersonal skills and a service orientation. Essential Functions: Maintains a high level of expertise of the Avaya PBX system and its features, functions, and programs. Acts as an in‐house expert on the Avaya PBX system and associated equipment. Installs, configures, and tests Avaya PBX hardware components such as trunk cards and line cards. Performs in‐depth technical programming of the Avaya PBX system. Performs installation of telephone or computer wiring where appropriate. Works with the Telecommunications Manager in planning moves involving telephone equipment or wiring. Performs basic troubleshooting tasks on telephone and telecommunications problems. Performs repairs if possible or works with communications vendor to solve problems. Maintains neat and accurate records of the physical components of the Avaya PBX system, including wiring diagrams, system hardware configuration, and routing schematics. Maintains inventory of spare parts to be used for equipment repair and for new equipment installation. Monitors specific security indicators periodically to alert TGC to potential security risks. Responsible for protecting The Guthrie Clinic against the misuse or theft of services by ensuring that the appropriate safeguards are activated on the Avaya PBX system. Performs capacity planning as it pertains to Avaya PBX hardware components, lines, trunks, etc. Monitors incoming and outgoing traffic to ensure the efficient and optimal use of the lines. Makes recommendations to management for the addition of lines and PBX hardware components where appropriate. Other Duties: Travel for this position is sometimes required. Learn and practices quality principles for continuous improvement in all work processes in which s/he is involved. It is understood that this description is not intended to be all‐inclusive and that other duties may be assigned as necessary in the performance of this position. Pay range min $25.60/hr max $39.94/hr About Us Joining the Guthrie team allows you to become a part of a tradition of excellence in health care. In all areas and at all levels of Guthrie, you'll find staff members who have committed themselves to serving the community. The Guthrie Clinic is an Equal Opportunity Employer. The Guthrie Clinic is a non-profit, integrated, practicing physician-led organization in the Twin Tiers of New York and Pennsylvania. Our multi-specialty group practice of more than 500 physicians and 302 advanced practice providers offers 47 specialties through a regional office network providing primary and specialty care in 22 communities. Guthrie Medical Education Programs include General Surgery, Internal Medicine, Emergency Medicine, Family Medicine, Anesthesiology and Orthopedic Surgery Residency, as well as Cardiovascular, Gastroenterology and Pulmonary Critical Care Fellowship programs. Guthrie is also a clinical campus for the Geisinger Commonwealth School of Medicine.