Controls technician jobs in Johnson City, TN - 4,750 jobs

Job Status/Type: Full time Level I Shift/ Schedule Requirements: Ability to work various shifts and days including nights, weekends and holiday periods to meet business needs. Responsible for inspecting, installing, troubleshooting, and repairing electrical components, alarm systems, light systems, building electrical systems, and sound systems Benefits: 3 weeks paid vacation (6 sick days, 8 paid holidays) Several medical coverage options to fit your needs best 401K match Maintenance-specific scholarships available FREE entry to ALL our parks and water parks! Perks: Yearly maintenance appreciation week celebration Complimentary tickets for friends and family Discounts on food and park merchandise Full-time and part-time employee events and gatherings Responsibilities: Electronics Technicians install and maintain telephone systems, radio communication systems, communications lines, including the ride PA systems and speakers and wiring for park area sound, various digital and microprocessor controlled devices, video surveillance systems, and electronic shooting galleries, if any; repair, overhaul, troubleshoot, modify, fabricate, and test various types of electronic equipment and related devices, such as animatronic controls and park lighting systems; troubleshoot those systems and all electronic wiring circuits; take test readings; and use tools and common test instruments in the course of those tasks. Adheres to and enforces all Carowinds and specific Park policies and procedures, including safety, attendance and EEO policies, and demonstrates commitment to customer service in all aspects of employment Qualifications: Knowledge, Skills & Abilities: Basic knowledge of electronics installation and maintenance, including sound system installation and setup, lighting hanging, cable dressing, and animatronic controls Education: High School Diploma or GED License or Certification: Electronics Technician Certification Experience: Less than 1 year of experience. Equivalency: Directly related experience or a combination of directly related education and experience and/or competencies may be considered in place of the above requirements.

Requires advanced knowledge of operational procedures and tools obtained through extensive work experience and may require vocational or technical education. Responsibilities typically include: working under limited supervision for non-routine situations and may be responsible for leading daily operations. Training, delegating, and reviewing the work of lower-level employees. Problems are typically difficult and non-routine but not complex. Primary Duties Diagnose and troubleshoot automation equipment, including PLCs and SCADA systems. Design and implement modifications to control systems under general guidelines or independently. Execute repairs and implement modifications to enhance safety and reduce costs. Collaborate with management to support manufacturing operations and business continuity. Conduct failure investigations and document findings for automation issues. Maintain compliance with quality systems while optimizing manufacturing processes. Conduct complex diagnostic tests and root cause analysis for system failures. Participate in planning and executing system upgrades and expansions. Make recommendations for process optimization and efficiency improvements. Perform all work in compliance with company quality procedures and standards. Perform other duties as assigned. Education High School Diploma, GED, or equivalent required. Qualifications 5+ years of experience maintaining and/or troubleshooting automated systems in a manufacturing environment. Knowledge, Skills and Abilities: Strong troubleshooting and diagnostic skills for automation systems. Ability to work under limited supervision and handle non-routine situations. Knowledge of PLCs, SCADA systems, and automation equipment. Problem-solving and root cause analysis for system failures. Ability to collaborate effectively with management and cross-functional teams. Working Conditions Ability to remain in stationary position, often standing, for prolonged periods. Ability to ascend/descend stairs, ladders, ramps, and similar structures. Ability to wear PPE correctly most of the day. Ability to operate heavy machinery. Ability to adjust or move objects up to 50 pounds in all directions. Domestic travel required: 0%. International travel required: 0%. Typical manufacturing environment with exposure to automated equipment. The estimated salary range for this role is between $38.00 and $50.00. This role is eligible to receive a variable annual bonus based on company, team, and individual performance per bio Merieux's bonus program. This range may differ from ranges offered for similar positions elsewhere in the country given differences in cost of living. Actual compensation within this range is determined based on the successful candidate's experience and will be presented in writing at the time of the offer. In addition, bio Merieux offers a competitive Total Rewards package that may include: * A choice of medical (including prescription), dental, and vision plans providing nationwide coverage and telemedicine options * Company-Provided Life and Accidental Death Insurance * Short and Long-Term Disability Insurance * Retirement Plan including a generous non-discretionary employer contribution and employer match. * Adoption Assistance * Wellness Programs * Employee Assistance Program * Commuter Benefits * Various voluntary benefit offerings * Discount programs * Parental leaves #biojobs Please be aware that recruitment related scams are on the rise. Fraudulent job postings are being placed on other websites, and individuals posing as bio Merieux Talent Acquisition team members are reaching out via email or text message in an attempt to collect your personal and confidential information. In some cases, these scammers are also conducting bogus interviews prior to extending fraudulent offers of employment. Beware of individuals reaching out using general phone numbers and non-bio Merieux email domains (i.e. Hotmail.com, Gmail.com, Yahoo.com, etc.). If you are concerned that an interview experience or offer of employment might be a scam, please make sure you are searching for the posting on our careers site or contact us at [emailprotected]. BioMerieux Inc. and its affiliates are Equal Opportunity/Affirmative Action Employers. All qualified applicants will receive consideration for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, protected veteran or disabled status, or genetic information. Please be advised that the receipt of satisfactory responses to reference requests and the provision of satisfactory proof of an applicant's identity and legal authorization to work in the United States are required of all new hires. Any misrepresentation, falsification, or material omission may result in the failure to receive an offer, the retraction of an offer, or if already hired, dismissal. If you are a qualified individual with a disability, you may request a reasonable accommodation in BioMerieux's or its affiliates' application process by contacting us via telephone at , by email at [emailprotected], or by dialing 711 for access to Telecommunications Relay Services (TRS).

This support includes, but is not limited to the following functions: Provide technical support and identify process improvement opportunities based on incident investigations, root cause analysis, and industry best practices. Support Fleet wide compliance efforts and maintenance standards. Support Station Engineer with capital projects, CBM (Condition Based Maintenance)/PdM (Predictive Maintenance) program, and station evaluation. Support station maintenance activities. Candidate will support various station programs including R-Stamp, ASR/GADS, Vibration analysis, etc. Perform other duties as requested or assigned. Required Knowledge, Skills, Abilities and Experience The knowledge, skills, abilities, and experiences required for entry into this job include the following: please make sure your resume reflects how you meet these requirements: Basic knowledge of engineering theories and principles. Some understanding of advanced techniques and modification and extension of theories, precepts and practices of the field and related sciences and disciplines. Strong oral and written communication skills (includes technical writing). Strong personal computer skills. Ability to think analytically and solve problems. Ability to understand ASME codes, regulations, and practices. Ability to read and interpret various station drawings. Knowledge of various computer applications, with the ability to manipulate personal computer applications and perform engineering calculations using applicable software programs (Excel, etc.). Equally effective working independently or in team environment. Decision making skills. Ability to process information quickly and effectively manage multiple tasks. Planning, organizational and project management skills. Preferences: Mechanical/Electrical principles with an understanding of CBM and rotating equipment. SAP About PTR Global: PTR Global is a leading provider of information technology and workforce solutions. PTR Global has become one of the largest providers in its industry, with over 5000 professionals providing services across the U.S. and Canada. For more information visit ***************** At PTR Global, we understand the importance of your privacy and security. We NEVER ASK job applicants to: Pay any fee to be considered for, submitted to, or selected for any opportunity. Purchase any product, service, or gift cards from us or for us as part of an application, interview, or selection process. Provide sensitive financial information such as credit card numbers or banking information. Successfully placed or hired candidates would only be asked for banking details after accepting an offer from us during our official onboarding processes as part of payroll setup. Pay Range: $28- $31/hr W2 The specific compensation for this position will be determined by several factors, including the scope, complexity, and location of the role, as well as the cost of labor in the market; the skills, education, training, credentials, and experience of the candidate; and other conditions of employment. Our full-time consultants have access to benefits, including medical, dental, vision, and 401K contributions, as well as PTO, sick leave, and other benefits mandated by applicable state or localities where you reside or work. If you receive a suspicious message, email, or phone call claiming to be from PTR Global, do not respond or click on any links. Instead, contact us directly at ***************. To report any concerns, please email us at *******************

SimVentions is a 100% employee-owned business and has consistently been voted one of Virginia's Best Places to Work. We are looking for an experienced Engineering Technician with an artisan level electrical and/or mechanical background; skilled with design, development, and testing of electrical and mechanical components, assemblies, or systems. Self-starters with a desire to create and build innovative designs should apply. Travel: Minimal Travel - only as necessary for customer events Clearance: An INTERIM or ACTIVE Secret Clearance is required for this position. Applicants selected will be subject to a security investigation and may need to meet eligibility requirements for access to classified information. US Citizenship is required to obtain a clearance. Requirements: High aptitude to learn and follow instructions with little supervision, meet deadlines, be a dependable team player, and have good work ethic. Ability to work in a fast-paced production environment. Ability to solder and rework small PCB components down to 0201. Comfortable working in a Electrostatic Discharge (ESD) safe environment. Ability to multitask, adapt on the fly, prioritize and change focus rapidly. 5+ years with the following: Experience using tools and equipment to conduct electrical and mechanical part installation and removal (soldering irons, screwdrivers, pliers, cutters, microscopes, reflow ovens, etc.). Experience using tools and computers for diagnostics, maintenance management or general testing (power supplies, Oscilloscopes, signal generator, Digital Multimeter, spectrum analyzer, etc.). Responsibilities: Follow defined processes and procedures to assemble/populate printed circuit boards (PCBs). Use Soldering Iron to install and/or rework Surface Mount Technology (SMT) and thru-hole components on PCBs. Read and understand engineering, design, fabrication or assembly documents. Ability to define and document issues, collect and organize data, establish facts, and draw conclusions from field notes, technical manuals, lab reports, and bench tests. Integrate electrical and mechanical components into a new design or into existing systems (eg. motors, gears, treads, antennae). Provide feedback to engineers or other design teammates in collaborative environment to promote prototype enhancements. Participate in component level and functional level test events. Conduct general and industry research on items under evaluation to support purchase and design decisions (Should be familiar with researching items through sites such as DigiKey and McMaster-Carr). Conduct electrical and mechanical troubleshooting of existing, or prototype systems with an eye for recommendations for future improvement. Professionally care for sensitive or classified materials, concepts, or designs. Preferred Skills and Experience: J-STD-001 and IPC certification endorsements ***************/7721). Experience utilizing advanced PCB assembly, manufacturing, and inspection equipment (e.g. Pick and Place, LPKF, X-RAY, SMT/BGA Rework Station, Automatic Defluxing Systems, Automated Optical Inspection Systems). 5 years with the following: Experience with Department of Defense (DoD) systems or component design and fabrication. Utilize Computer Aided Design (CAD) software (Altium, SolidWorks, Fusion 360, etc.) to create, review, and analyze mechanical or electrical designs. Education: High School Diploma or equivalent. Trade / Technical School Diploma/Certificate a major plus. Compensation: Compensation at SimVentions is determined by a number of factors, including, but not limited to, the candidate's experience, education, training, security clearance, work location, skills, knowledge, and competencies, as well as alignment with our corporate compensation plan and contract specific requirements. The projected annual compensation range for this position is $78000-106,780.00 (USD). This estimate reflects the standard salary range for this position and is just one component of the total compensation package that SimVentions offers. Benefits: At SimVentions, we're committed to supporting the total well-being of our employees and their families. Our benefit offerings include comprehensive health and welfare plans to serve a variety of needs. We offer: Medical, dental, vision, and prescription drug coverage Employee Stock Ownership Plan (ESOP) Competitive 401(k) programs Retirement and Financial Counselors Health Savings and Health Reimbursement Accounts Flexible Spending Accounts Life insurance, short- & long-term disability Continuing Education Assistance Paid Time Off, Paid Holidays, Paid Leave (e.g., Maternity, Paternity, Jury Duty, Bereavement, Military) Third Party Employee Assistance Program that offers emotional and lifestyle well-being services, to include free counseling Supplemental Benefit Program Why Work for SimVentions?: SimVentions is about more than just being a place to work with other growth-orientated technically exceptional experts. It's also a fun place to work. Our family-friendly atmosphere encourages our employee-owners to imagine, create, explore, discover, and do great things together. Support Our Warfighters SimVentions is a proud supporter of the U.S. military, and we take pride in our ability to provide relevant, game-changing solutions to our armed men and women around the world. Drive Customer Success We deliver innovative products and solutions that go beyond the expected. This means you can expect to work with a team that will allow you to grow, have a voice, and make an impact. Get Involved in Giving Back We believe a well-rounded company starts with well-rounded employees, which is why we offer diverse service opportunities for our team throughout the year. Build Innovative Technology SimVentions takes pride in its innovative and cutting-edge technology, so you can be sure that whatever project you work on, you will be having a direct impact on our customer's success. Work with Brilliant People We don't just hire the smartest people; we seek experienced, creative individuals who are passionate about their work and thrive in our unique culture. Create Meaningful Solutions We are trusted partners with our customers and are provided challenging and meaningful requirements to help them solve. Employees who join SimVentions will enjoy additional perks like: Employee Ownership: Work with the best and help build YOUR company! Family focus: Work for a team that recognizes the importance of family time. Culture: Add to our culture of technical excellence and collaboration. Dress code: Business casual, we like to be comfortable while we work. Resources: Excellent facilities, tools, and training opportunities to grow in your field. Open communication: Work in an environment where your voice matters. Corporate Fellowship: Opportunities to participate in company sports teams and employee-led interest groups for personal and professional development. Employee Appreciation: Multiple corporate events throughout the year, including Holiday Events, Company Picnic, Imagineering Day, and more. Founding Partner of the FredNats Baseball team: Equitable distribution of tickets for every home game to be enjoyed by our employee-owners and their families from our private suite. Food: We have a lot of food around here! FTAC

Job Title: Facilities Technician Company: AISIN North Carolina Department: Facilities The Facilities Technician is responsible for providing electrical and mechanical support to the plant facilities. This role troubleshoots and maintains industrial manufacturing facilities equipment as well as the outdoor grounds of the facility. Position Responsibilities The incumbent is expected to perform the following functions that the company has determined are essential to this position: Handle industrial electrical issues including changing light bulbs and working with 208, 277, 480-volt, 3 phase and 120-volt, single phase equipment. Install, repair, and troubleshoot industrial piping systems along with the ability to change out pumps and motors. Troubleshoot to determine malfunctions on equipment using knowledge of microprocessors, programmable controllers, and circuit analysis. Troubleshoot AC & DC Systems up to 480 volts. Record maintenance and repairs activities in a computer-based maintenance management system, fill out utility check sheets and other required check sheets. Run Wastewater treatment system. Check operating status of air compressors. Execute plumbing repairs such as clearing clogged fixtures, drains, and adjusting leaks. Clean out clogged pumps in the sump pumps system as well as troubleshoot and adjust level controls in the system. Repair manual and automatic doors, hinges, locks, and closers on personal doors. Make repairs to dock equipment and the well system. Review equipment check sheets for abnormal readings. Lead Team Members in light fixture replacement. Ensure that restrooms are in good working order. Identify and repair building issues. Assist in making safety related kaizens and repairs. Plan and implement Kaizens. Required Skills and Abilities Essential Skills and Experience: 2 or more years of experience in industrial maintenance. Knowledge of electrical equipment - 480/230v 3ph, 110&24 vdc controls, prints and schematics. Knowledge of hydraulics and pneumatics. Knowledge of Plant Fire Sprinkler Systems. Ability to reset faults in the following systems and equipment: ATF Supply System, Crane Systems, Fluid Coolers, Air Compressors. Ability to safely operate industrial moving equipment such as a scissor lift, forklift, and other equipment. Ability to troubleshoot and correct faults on Wastewater System. Electrical skills. Mechanical - general knowledge of machines, tools, measurement instruments, automation/robotics, maintenance, and repair. Repairing - repairing machines or systems using the necessary tools. Equipment Maintenance - performing routine maintenance on equipment and determining when and what kind of maintenance is needed. Equipment Selection - determining the kind of tools and equipment needed to do a job. Math Skills - basic knowledge of mathematics. Education/Training/Certifications Associate degree in Electrical or Industrial Maintenance preferred. Travel Requirements Approximately 0 % Must be willing and available to travel to such locations and with such frequency as is necessary and desirable to meet business needs. Work Environment Requirements With reasonable accommodation: Must be able to operate a personal computer, telephone, and other office equipment. Must perform job duties onsite, when necessary, except those duties that are customarily or by their nature performed offsite (for example, offsite customer visits). Must be able to work effectively in a fast-paced environment. Must be able to work on multiple assignments at once, and complete assignments within deadline and budget (if applicable) with satisfactory quality. Must be able to operate as an effective team member. Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all company safety policies. Attendance/Work Hour Requirements Must maintain an acceptable attendance record. Must be willing and available to work weekends and holidays as necessary and desirable to meet business needs.

Nemak is a leading provider of innovative lightweighting solutions for the global automotive industry, specializing in the development and manufacturing of aluminum components for e-mobility, structure & chassis, and ICE powertrain applications. We are currently hiring an Electrical Maintenance Technician at the Dickson, TN location. Possible shifts are as follows: 11:00 p.m. - 7:00 a.m. 3:00 p.m. - 11:00 p.m. 7:00 p.m. - 7:00 a.m. Maintenance Technician Responsibilities/Daily Duties: Strong focus on troubleshooting PLCs, robotics, conveyor systems, pneumatics, and motor drive. Adhere to lockout and tag procedures, prioritizing safety at all times Perform machinery repairs using a variety of tools Clean and lubricate machinery parts as needed Perform adjustments, tightening, and repairs during production breaks and work stoppages whenever possible Proactively monitor your area for issues and take initiative in preparing for and executing repairs problems Provide improvement suggestions to the area supervisor and shift engineers Rebuild parts and pre-stage repetitive usage items in the maintenance area Maintain small repetitive usage tools and rigging equipment in the maintenance area Proactively address pneumatic, hydraulic leaks and safety-related issues Communicate emergency and planned work order data promptly to maintenance supervisor or shift lead technician Conduct informal shift changeovers and provide relief on machines as needed Participate in Total Productive Maintenance (TPM) exercises, closely collaborating and supporting production operations Inspect, diagnose, and troubleshoot mechanical issues in hydraulic and pneumatic systems Install, assemble, and test machinery and equipment Perform routine preventive maintenance checks, inspections, and servicing on all equipment to ensure safe operations and to identify potential malfunctions in machines Perform repairs, replacements, and various mechanical, electrical, hydraulic, pneumatic, and welding tasks associated with various maintenance tasks Conduct electrical troubleshooting, machine rebuilds, and component overhauls, including dismantling, inspection, repair, or replacement of parts Assemble, install, or repair wiring, electrical/electronic components, pipe systems, plumbing, machinery, and equipment Utilize forklifts, scissor lifts, and JLG lifts as required Possess proficiency in installing, repairing, and maintaining equipment throughout the manufacturing process Preform all additional tasks assigned by the supervisor or other member of management Preferred Knowledge and Abilities: Ability to read hydraulic, pneumatic, electrical, electronic schematics, and ladder diagrams Ability to troubleshoot and repair hydraulic, pneumatic, and electrical control systems Ability to interpret and troubleshoot electrical and motor controls circuits Knowledge of electrical machinery control, including the ability to interpret logic and program programmable controllers Maintenance experience ranging from two to five years Experience in both power distribution and hard-wire control techniques Requirements/Qualifications: High School Diploma or GED Two (2) years of industrial maintenance experience and/or a two year technical degree/certification required Allen-Bradley PLC programming certification preferred Prior experience in an automotive manufacturing environment preferred Advanced mechanical knowledge of conveyors, rollers, fabrication and welding Advance knowledge and proven experience in PLC programing and troubleshooting Proficient in programming using ladder logic and HMI interfaces Prior experience in an automotive manufacturing environment preferred Successful completion of appropriate skills test, which determines the maintenance technician level Availability for short-notice overtime, including weekends Job Type: Full-time Pay: $35.63 - $42.76 per hour

Airbus is committed to providing reasonable accommodations as an Equal Opportunity Employer to applicants with disabilities. If you require assistance or an accommodation to complete your application, please contact us at Notice: Know Your Rights: Workplace Discrimination is Illegal Notice: Pay Transparency Nondiscrimination (English) Aviso: Transparencia en el Pago No Discriminacio ́n (Spanish) *:** Airbus Aerosystems Kinston is looking for a *Manufacturing Engineering Technician* to join our team based in Kinston, NC. *Meet the Team: * Our team at Airbus Aerosystems Kinston manufactures crucial aircraft components. On the shop floor you'll be surrounded by individuals who are passionate about aviation and skilled in areas like electrical, structure and quality. Join our team and help build the next generation of aircraft. *Your Working Environment:* The Airbus Aerosystems Kinston facility sits at the forefront of aerospace manufacturing, specializing in the production of large, advanced composite aerostructures. Our team builds critical components for the state-of-the-art Airbus A350 XWB, including the composite center fuselage and wing spar. How We Care for You:* Financial Rewards: Competitive pay, incentive compensation which may include profit sharing schemes, retirement savings plan and the ability to participate in an Employee Stock Ownership Plan ("ESOP") Work/Life Balance: Paid time off including personal time, holidays and a paid parental leave program. Health & Welfare: Comprehensive insurance coverage including medical, prescription, dental, vision, life, disability, Employee Assistance Plan ("EAP") and other supplemental benefit coverages. Individual Development: Upskilling and development opportunities through our global Leadership University, including unlimited access to 10,000+ e-learning courses focusing on ways to develop your employability, certifications, career path; as well as the opportunity to participate in accelerated development programmes; and both national and international mobility. Your Challenges:* Coordinates with engineering, manufacturing, and supply teams to develop, guide and implement manufacturing and tooling plans. Ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. Uses process engineering principles, established manufacturing principles, plans and techniques to define sequencing of manufacturing. Develops, establishes, and guides requirements for assembly, tooling simulations, manufacturing processes and configuration control. Communicates with manufacturing and engineering teams to influence and clarify engineering and facilities design concepts to increase manufacturability, improve production flow and optimize processes. Has the ability to demonstrate configuration control of the hardware, within the manufacturing build plan. Ability to apply knowledge in one or more of the following areas; Composite non- metallic, Electrical/Electronics, Machining, Sheet metal, Systems and Structures. Your Boarding Pass:* Associates/ Bachelor's degree from an engineering technology program with 1-5 years of relevant experience . Engineering Technology Accreditation Commission (ETAC) accreditation standard is required Ability to apply knowledge in one or more of the following areas; Structural Assembly planning Tool Planning Composite non-metallic Electrical/Electronics Machining Sheet metal Systems and/or Structures Preferred Qualifications* * SAP * Creating and maintaining manufacturing plans * CATIA V5 SAP Visual Enterprise (formerly Right Hemisphere) Lean Manufacturing, Root Cause Corrective Action and/or Six Sigma Tool Index Planning Understanding of the application of time standards Enovia V6 Enovia 3dexperience Six Sigma Project Management Automation Technology Liaison support Command Media Documentation Training Material Creation and execution Physical Requirements: * Vision: Daily able to see and read computer screens and other electronic equipment with screens, able to read documents, reports and engineering drawings. Hearing: Daily able to participate in conversations in person and via teleconference or phone and to hear sounds on the production floor including safety warnings or alarms. Speaking: Daily able to speak in conversations and meetings, deliver information and participate in communications. Equipment Operation (personal computer, telephone, copies, fax machine, and related office equipment and using electronic identification card to enter building floors and internal doors):Rarely able to operate most office and personal electronic equipment and some tools including production tools such as hydraulic lifts. Carrying: Weekly able to carry documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Lifting: Weekly able to lift documents, tools, drawings, electronic equipment up to 30lbs/14kgs. Pushing / Pulling: Several times a month able to push and pull small office furniture and some equipment and tools. Sitting: Daily able to sit for long periods of time in meetings, working on the computer. Squatting / Kneeling: Daily able to squat or kneel to retrieve or replace items stored on low shelving. Standing: Daily able to stand for discussions in offices or on the production floor. Travel: Once or twice a year able to travel independently and at short notice. Walking (include routine walking such as to a shared printer to retrieve documents): Daily able to walk through office and production areas including uneven surfaces. Personal Protective Equipment required: Required PPE includes, but is not limited to, Safety Shoes, Safety Glasses, Hearing Protection, Respirators/Masks, and/or Protective Gloves as required by site and/or customer site Administrative position only PPE required: Steel-toed shoes are required for all shop floor visits, appropriate hearing/eye protection may also be required when visiting the shop floor. Take your career to a new level and apply online now! A full job description will be provided to candidates who progress to the interview stage or any candidate upon request. This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company's success, reputation and sustainable growth. ****Company:**** Airbus Aerosystems Kinston, Inc *Employment Type:* US - Direct Hire *Experience Level:* Professional *Remote Type:* On-site *Job Family:* Assembly & Integration ----- ----- Airbus provides equal employment opportunities (EEO) to all employees and applicants for employment without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. In addition to federal law requirements, Airbus complies with applicable state and local laws governing nondiscrimination in employment in every location in which the company has facilities. This policy applies to all terms and conditions of employment, including recruiting, hiring, placement, promotion, demotion, termination, layoff, recall, transfer, leaves of absence, compensation, benefits and training. Airbus expressly prohibits any form of workplace harassment based on race, color, religion, sex, sexual orientation, gender identity, national origin, age, disability, genetics, pregnancy, marital status, veteran status or other legally protected status. As a matter of policy, Airbus does not sponsor visas for US positions unless specified. Only applicants with current work authorization will be considered. Airbus does not offer tenured or guaranteed employment. Employment with Airbus is at will, meaning either the company or the employee can terminate the employment relationship at any time, with or without cause, with or without notice. Airbus reserves the right to revise or change job duties and responsibilities as the need arises. This position description does not constitute a written or implied contract of employment. By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus. Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief. Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to .

Job Title: Automation & Controls Engineer Duration: 12 months with possible extension Shift: 8:00 AM - 5:00 PM , 40 hours a Week ! Responsibilities :- Provide 2nd level technical expertise in PLC controls-based troubleshooting, Controls hardware, and wiring specifically in support of new production line installation. Follow direction from a Sr Controls Engineer. Enhance manufacturing capabilities through the implementation of new ideas and methods. Independently execute project objectives to fulfil overall project goals and milestones. Requirements:- Experience with PLCs, HMIs, drives, and safety systems and structured programming Knowledge of controls systems design, hardware, and troubleshooting Experience working in a manufacturing environment Strong written & oral communications skills Actively participate in all phases of projects including design, fabrication, off-line integration and testing, installation, production start-up support, training of plant personnel and technology transfer. Individual must be capable of executing project assignments, in a team-based environment, with minimal supervision AAS or Higher. 3 additional years of experience can be considered in lieu of formal education (for a total of 10). 4+ Years working with PLCs-Allen Bradley, Rockwell preferred HMIs, drives, and safety systems and structured programming, preferably in a manufacturing environment.

Job Information State of Tennessee Job InformationOpening Date/Time01/13/2026 12:00AM Central TimeClosing Date/Time01/26/2026 11:59PM Central TimeSalary (Monthly)$4,562.000000 - $5,694.000000Salary (Annually)$54,744.00 - $68,328.00Job TypeFull-TimeCity, State LocationNashville, TNDepartmentTransportation LOCATION OF (2) POSITION(S) TO BE FILLED: DEPARTMENT OF TRANSPORTATION, DAVIDSON COUNTY These positions are in the Region3 - Traffic Operations - Traffic Operations & Permitting Section. For more information, visit the link below: These positions have a starting rate of $4,969 Monthly/$59,628 Annually. Qualifications Qualifications Education and Experience: Education equivalent to graduation from high school and four (4) years of relevant transportation operations experience and completion of the Engineering Technician Proficiency Program levels I through III Or Education equivalent to graduation from high school and four (4) years of relevant transportation operations experience including at least one (1) year of experience with leading crews or teams on assignments and/or training employees, including effective communication through active listening, and providing verbal and written instructions Substitution of Education for Experience: An associate degree in a related field of study may substitute for 2 years of experience in the related field as outlined in the position description. Relevant transportation operations experience should be full-time work in a combination of the following areas: Transportation-related construction and quality control inspections Materials and testing Surveying Transportation project operations and documentation Transportation Systems Management and Operation (i.e., Freeway, Intelligent Transportation Systems (ITS), EMS, Freight, TIMs, Integrated Corridor Management (ICM) systems, and Active Transportation and Demand Management) Necessary Special Qualifications Possess and maintain a Class D driver's license valid to operate vehicles in the State of Tennessee Some positions within this classification may require candidates to possess and maintain, or obtain at their own expense and within 11 months of hire or promotion to this classification, a Class A Commercial Driver's License with an N endorsement without a Code O restriction (Code 52 restriction is allowable) that is valid in the State of Tennessee. Conditions of Employment Must pass a drug test prior to employment for commercial driver and safety impact positions. Commercial drivers and safety impact employees will be subject to additional drug and alcohol testing during employment. Incorporating overtime, weekends, and night shifts into their schedules as work schedules dictate, including on-call rotation Extended durations outdoors in extreme weather conditions Working in and around construction and vehicular traffic Walking on uneven terrain Climbing ladders and construction scaffolding Carrying equipment and samples in excess of 25 pounds Driving long distances are required as part of daily duties Performing work in which personal protective equipment will be required to be worn Overview SUMMARY This is the senior level in the Engineering Technician series for TDOT. This position is primarily responsible for driving the transportation operation functions within the department. This includes contract development and implementation, interpretation and implementation of federal and state statutes, interpretation and implementation of department policy and procedures, surveying, materials sampling and testing, construction inspection, contract documentation of daily activities, interaction with internal and external customers, as well as the processing of permits requiring the ability to interpret and apply technical skill sets. In addition, the TDOT Engineering Technician IV follows the direction of the Supervisor to perform senior-level functions with complete responsibility for the most complex equipment operations and coordination of transportation technician activities. Employees in this class may be assigned to a headquarters specific office or a specific geographic area within a region or work in a region-wide assignment. Responsibilities RESPONSIBILITIES NOTE: The job responsibilities listed are typical examples of the work performed by positions in this job classification. Not all duties assigned to every position are included, nor is it expected that all positions will be assigned every duty. Prioritizes and incorporates safe practices into daily activities Leads crews or teams on assignments and/or trains employees, including effective communication through active listening, and providing verbal and written instructions Reads, interprets, and applies federal and state statutes and department policies related to transportation activities including construction, materials acceptance, and environmental compliance Assists internal and external customers in identifying, documenting, and resolving highly complex issues Serves as a mentor in supporting career development and training, as well as cultivating communication and leadership skills of others at TDOT Provides acquired knowledge to project teams with respect to project design elements that resulted in change orders, schedule delays, and construction quality issues on previously constructed projects Reads, interprets, and applies contract documents, legal documents, and project design plans as part of daily activities Ensures TDOT's Quality Assurance process is followed for all work items Documents project work activities per TDOT policies, specifications, and guidelines for progress reporting and use with contractor payments Performs testing, including pertinent calculations, to meet the appropriate ASTM, AASHTO, and departmental specifications in the areas of soil, asphalt, concrete, density, field measurements, and manufactured products Safely and effectively operates light duty vehicles, equipment used to remove snow and ice from highways and bridges, and heavy equipment necessary to conduct soil boring operations Implements work zone traffic control per the MUTCD and TDOT's policies, specifications, and guidelines Operates survey equipment to set line, grade, and project reference. Operates computer equipment Performs other job responsibilities as assigned Competencies (KSA's) Knowledge, Skills, Abilities, Competencies Knowledgeable of the Tennessee Manual on Uniform Traffic Control Devices (MUTCD) Knowledgeable in transportation operations safety procedures Knowledgeable in administering contracts Skilled in report and form writing Skilled in applicable hand and power tools, equipment, and mechanical devices of the trade Skilled in the use of light and heavy equipment Ability to communicate effectively using both verbal and written instructions Ability to use computers and applicable programs, applications, and systems Ability to recognize and take precaution for potential hazards Ability to lead teams - maintaining effective work relationships with individuals and groups, both internal and external Ability to provide tailored instruction and teaching methods that accommodate the differing learning styles of others Ability to analyze a process and offer actionable feedback on how to improve the process for effectiveness, quality, and efficiency Ability to use objective thinking, focus on relevant details, and weigh the outcomes of different options to make decisions in resolving issues. Ability to read, interpret, and apply information from a variety of formats including statutes, policies, procedures, specifications, and construction drawings Knowledge and ability in reviewing and enforcing traffic control and work zone traffic safety plans Knowledge and ability in reviewing and enforcing compliance of work site safety plans for field and laboratory facilities

Healing Lives Inside and Out. For more than 75 years, CaroMont Health has been the community's most trusted healthcare partner. Our history has always been guided by the principles of compassion and empathy, leading the way to a brighter, healthier future. Polysomnography Technologist ‐ Day Shift Job Summary: To perform polysomnographic recordings and the various technical duties related to the polysomnographic evaluations (HST, PSG, PAP, MWT and MSLT) of various sleep disorders. Prepare patients for testing, perform tests, and prepare test results for physician interpretation. Complete other duties as needed. Qualifications: High school diploma or equivalent required. Completion of an accredited polysomnography school required (unless already registered with the Board of Polysomnographic Technologists). Must be registered as a Polysomnographic Technologist (RPSGT) within 12 months of employment, as well as, registered with the North Carolina Medical Board. Must have and maintain current BCLS. EOE AA M/F/Vet/Disability

Title: Controls Engineer IV Duration: Full Time/Contract Travel: Negligible Work Hours and Schedule: M - F, 8 AM - 5 PM (Could be expected to work OT) Key Responsibilities: Create and modify Allen Bradley PLC programs for our fiber optic cable production plant. Design and implement new control systems projects. Mentor and train junior controls engineers Manage the controls engineering scope of process improvement, capital expansion, and obsolescence mitigation projects. Implement robust, cost-effective automation and process machine control systems. Interface with external system integrators to successfully deliver fully integrated process equipment systems to Corning's facility. Participate in all phases of the project including design, fabrication, off-line integration and testing, installation, production start-up support, training of plant personnel, and technology transfer. Independently follow construction of equipment in vendors' facilities. PPE Required: Safety Shoes Safety Glasses Ear Plugs in areas required. High Vis. vest. Educations and Experience: BSEE / BSCS / BSME / BSMET with 4+ years manufacturing experience working with PLCs / HMIs / VFDs controlling process and automation equipment; other engineering will be considered with relevant work experience. Required Skills: Must have experience in programming of Allen Bradley ControlLogix v20 systems or higher and the ability to generate, debug and modify PLC code - ladder logic, structured text and function block diagram. Must be able to generate and interpret electrical drawings using AutoCAD Electrical 2023 for systems design including control panel layouts, component documentation, and schematics. Prepare initial CAD design layouts of both complete electrical controls systems and control sub-sections. Review electrical drawing packages for conformance to Corning standards. Must have the ability to reach fundamental understanding of process issues utilizing sound troubleshooting skills. Must have experience in programming of HMI / SCADA systems programming in a plant environment including higher level communications protocols. Strong fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, VFD and Servo programming, communication protocols, and practical application. Ensure proactive safety measures for all equipment and processes. Seeks to identify and correct potential safety or environmental issues using NEC, NFPA, and other pertinent safety codes. Ensure safety procedures, such as Lock-Out Tag-Out, are always followed. Work closely with support technicians to resolve equipment issues. Capable of executing project assignments, in a team-based environment, with minimal supervision. Thoroughly carry out assignments to completion. Desired Skills: Extrusion and cable winding experience Entrepreneurial (able to conceive and design a control system never demonstrated). Visionary (understands the big picture and can project this view). Knowledge of legacy controls equipment, networks, and software. Experience with the OSI PI (historian) interface. iFix 5.9 or higher experience Beckhoff PLC experience. Strong written/verbal communication and interpersonal skills.

The Mental / Psychiatric Health Technician cares for individuals with psychiatric conditions as well as a variety of substance use disorders, following the instructions of physicians, nurses or other health practitioners. The Behavioral Health Technician monitors a patients' safety, physical and emotional well-being and report directly to medical staff. Minimum Requirements: High School diploma or equivalent required Associate's degree in behavioral studies or related field, or equivalent experience preferred (or per facility requirements) Minimum of one (1) year relevant experience preferred Current CPR if applicable TB Questionnaire, PPD or chest x-ray if applicable Current Health certificate (per contract or state regulation) Must meet all federal, state and local requirements Must be at least 18 years of age - $20/hr - 7P - 8:30 A - Nights Only - 1 year contract - ASAP Start Benefits At Amergis, we firmly believe that our employees are the heartbeat of our organization and we are happy to offer the following benefits: Competitive pay & weekly paychecks Health, dental, vision, and life insurance 401(k) savings plan Awards and recognition programs *Benefit eligibility is dependent on employment status. About Amergis Amergis, formerly known as Maxim Healthcare Staffing, has served our clients and communities by connecting people to the work that matters since 1988. We provide meaningful opportunities to our extensive network of healthcare and school-based professionals, ready to work in any hospital, government facility, or school. Through partnership and innovation, Amergis creates unmatched staffing experiences to deliver the best workforce solutions. Amergis is an equal opportunity/affirmative action employer. All qualified applicants will receive consideration for employment without regard to sex, gender identity, sexual orientation, race, color, religion, national origin, disability, protected Veteran status, age, or any other characteristic protected by law.

Title: EMG Technologist Duration: 13 weeks Schedule: Days, 5x8 hours Weekly Gross: $1,850 - $1,957 Required Skills & Certifications: Minimum 2 years of EMG experience Physician Office experience BLS (AHA) Benefits: Pride Global offers eligible employee's comprehensive healthcare coverage (medical, dental, and vision plans), supplemental coverage (accident insurance, critical illness insurance and hospital indemnity), 401(k)-retirement savings, life & disability insurance, an employee assistance program, legal support, auto, home insurance, pet insurance, and employee discounts with preferred vendors. About: Pride Health is the minority-owned healthcare recruitment division of Pride Global, an integrated human capital solutions and advisory firm. With our robust and abundant travel nursing and allied health employment options across the U.S., PRIDE Health will allow you to help change the way the world lives and heals as it connects you with the industry's leading healthcare organizations.

Loudoun County Government has been named one of Forbes' 2025 Best Large Employers! We're proud to be recognized nationally for our commitment to employee satisfaction and excellence in public service. At Loudoun County, we bring together talented professionals from all backgrounds to make a meaningful impact in a dynamic, growing community - that's The Loudoun Difference . Welcome and thank you for your interest in employment with Loudoun County Government! ALL SECTIONS OF THE APPLICATION MUST BE COMPLETED IN ITS ENTIRETY. THE RESUME IS CONSIDERED SUPPLEMENTAL INFORMATION ONLY. APPLICATIONS THAT ARE INCOMPLETE OR INDICATE 'SEE RESUME' WILL NOT BE TAKEN INTO CONSIDERATION. Introduction Salary offers are based on information contained within the application and any attachments (resume, certifications, etc.). Please ensure your profile and resume are up to date with all experience, education, and skills you wish to be considered. Loudoun County Parks, Recreation & Community Services (PRCS) is dedicated to connecting all communities through exceptional people, parks, and programs. Our goal is to make Loudoun the community of choice through outstanding experiences while promoting diversity, equity, inclusion, and accessibility. We celebrate the strengths of individuals and collaborate to deliver programs and community services that provide social, personal, economic, and environmental benefits to last a lifetime. Come be a part of something that matters! Job Summary The Loudoun County Department of Parks, Recreation, and Community Services is actively seeking qualified individuals for a full-time position as a Horticulture Technician. This role primarily involves carrying out specialized horticultural duties at municipal facilities throughout the county, both independently and as part of a team. Key responsibilities include the application of herbicides and pesticides, as well as pruning, installing, and maintaining high-value plantings. Additionally, the position requires conducting root-flare excavations, managing invasive exotic species, modifying plantings in the field, and implementing precision fertilization techniques. The Horticulture Technician also provides training and supervision to contractors involved in horticultural activities for the program. We are currently hiring for the following location(s): 849 Trailview Boulevard, Leesburg, VA 22914 Hanson Park Drive, Aldie, VA Responsibilities include, but are not limited to: Implements pesticide treatments; executes advanced pruning, watering, soil assessments, and fertilization; designs, constructs, and repairs landscape installations; in addition to testing, programming, and supervising. Evaluate the facilities within the county. Performs research and analyzes soil conditions to facilitate effective turf grass management, alongside strategies for weed and pest control. Conducts operation and maintenance activities for machinery, equipment, vehicles, and tools. It is possible that other essential duties related to the specific role and department may be performed. Minimum Qualifications High school diploma or equivalent; three (3) years of related work experience in horticulture or arboriculture; or equivalent combination of education and experience. Preferred Qualifications: A preferred background includes understanding the principles, practices, and techniques associated with horticulture, arboriculture, tree physiology, and the ANSI A300/Z133 industry standards, along with knowledge in biology, taxonomy, grounds maintenance, and landscape construction. Ability to effectively operate and handle backpack sprayers, chainsaws, blowers, water trailers with pumping mechanisms, trucks for trailer towing, and mobile computing tools for field documentation, pesticide record maintenance, and inventory oversight. ISA Certified Tree Worker or Arborist certifications preferred. Job Contingencies and Special Requirements Must undergo criminal, credit, and DMV backgrounds. A valid driver's license and good driving record are required. Driving records may be evaluated on an annual basis to ensure ongoing qualification. Valid Registered Technician certification is required. Certified Commercial Pesticide Applicator and Certified Fertilizer Applicator certifications are required within 6 months of employment. County, e-learning as required. The department may require additional certifications related to the position.

Amberstone is expanding our home services and light commercial operations and is seeking experienced service technicians with strong hands-on trade skills. This role is for professionals who take pride in their craftsmanship and understand what quality work looks like in the field. This is not an entry-level position. We are looking for technicians with real experience in residential and light commercial environments who can execute independently and uphold professional standards. Core experience we are looking for: • Framing and general carpentry • Drywall installation, repair, and finishing • Flooring installation and repair (LVP, laminate, tile, hardwood preferred) • General punch-out, repairs, and small remodel work • Ability to assess issues and execute proper solutions What this role involves: • Performing residential and light commercial service work • Completing framing, drywall, flooring, and finish tasks to a high standard • Maintaining clean, safe, and professional jobsites • Communicating clearly with leadership and customers • Following established processes, safety expectations, and quality controls What we expect from our skilled technicians: • Proven hands-on experience in the trades listed above • Reliability, punctuality, and strong personal accountability • Pride in workmanship and attention to detail • Professional conduct with clients and team members • A mindset focused on doing the job right-no shortcuts What we offer: • Competitive pay: $15-$25/hour, based on skill and performance • Consistent residential and light commercial work • Clear expectations and structured operations • Leadership that is present and involved • A professional environment where quality work is respected If you take your trade seriously, care about craftsmanship, and want to work in an environment where standards matter, we encourage you to apply. If you are looking for something casual or temporary, this role will not be the right fit. Amberstone is an equal opportunity employer. Employment decisions are based on qualifications, experience, and business needs. Qualifications Strong technical skills in installation, maintenance, and repair for residential and light commercial systems Experience in troubleshooting, diagnostic evaluations, and problem resolution Understanding of safety standards and protocols, and ability to adhere to regulations Good communication and customer service skills to interact with clients and team members effectively Demonstrated attention to detail and ability to work independently or as part of a team Relevant technical certifications or licenses (e.g., HVAC certification, electrical license) are a plus but NOT required. Previous experience in a similar role and familiarity with tools and equipment commonly used in the trade High school diploma, GED, or equivalent; additional technical training or an associate's degree in a related field is an advantage

Job ID 2025-12920 # of Openings 1 Category Data/Analytics Benefit Type Salaried High Fringe/Full-Time LMI is seeking a skilled GenAI Project Lead to support one of LMI's Defense account. The GenAI Project Lead will oversee multiple artificial intelligence technology project delivery teams, drive program schedules, manage project financials, and ensure the high-quality delivery of LMI contracts. A successful GenAI Project Lead will be highly skilled in project management, agile software delivery, communication, project planning, and financial management. The ideal candidate will be detail-oriented, possess the management skills to hold team members accountable to quality expectations and timelines, and respond swiftly to evolving client needs. A background in digital transformation and software development is highly desired. The GenAI Project Lead must demonstrate competency in leadership, strategic thinking, relationship management, multitasking, schedule management, and delivery excellence, while upholding the highest standard of ethical behavior. LMI is a new breed of digital solutions provider dedicated to accelerating government impact with innovation and speed. Investing in technology and prototypes ahead of need, LMI brings commercial-grade platforms and mission-ready AI to federal agencies at commercial speed. Leveraging our mission-ready technology and solutions, proven expertise in federal deployment, and strategic relationships, we enhance outcomes for the government, efficiently and effectively. With a focus on agility and collaboration, LMI serves the defense, space, healthcare, and energy sectors-helping agencies navigate complexity and outpace change. Headquartered in Tysons, Virginia, LMI is committed to delivering impactful results that strengthen missions and drive lasting value. Responsibilities Management of complex Agile AI projects ensuring that goals, requirements, and outcomes are defined and that the appropriate resources are allocated Monitor team performance to ensure that projects are implemented, supported, and closed accurately and in accordance with key milestones and established project standards are upheld and clearly defined throughout the entire process of each project's development and execution Foster positive working relationships with team members, client personnel, and leadership counterparts Prioritize tasks, set deadlines, and assign resources to each project Track cost, schedule, and performance, as well as prepare documents and develop project-specific policy, procedures, and report status to all levels Manage staffing requirements, including recruiting, hiring, onboarding, and execution Manage task assignments and oversight of personnel to ensure excellence in service delivery Prepare monthly cost reports and ensure such deliverables are submitted in a timely fashion and of high quality/accuracy. When appropriate, propose a plan to correct any cost variances or projected rate adjustments Ensure program compliance with government and corporate policies and mandates, and adherence to directives from governing entities Ensure a smooth deployment of artificial intelligence technology into secure environments, adhering to DevSecOps and Cybersecurity practices. Work closely with Cybersecurity resources to document controls, support accreditation processes, and provide metrics to comply with audits, including IATT and ATO documentation. Anticipate and resolve procurement challenges and problems, such as small business set-aside goals, certification requirements, and acquisition strategy Work with LMI and LMI business partners to pursue new business opportunities Support business development and bid and proposal efforts for opportunities, bringing together capabilities across LMI to define a solution that meets and exceeds client expectations Qualifications Minimum Qualifications Bachelor's Degree or higher Minimum of 5 years consulting experience Minimum 3 years project management and/or task leadership experience Experience with GenAI technologies and a strong point of view on how these tools can be combined to impact the government Experience in the areas of SDLC and Agile software development methodologies Demonstrated experience in deploying software systems adhering to DevSecOps principles and cybersecurity best practices. Experience with documenting security controls, supporting accreditation processes, and providing metrics for audits, including IATT and ATO documentation. Technically adept and business-focused to interface across technical disciplines and senior leadership Product management or related product lifecycle experience Superior communication skills, both oral and written Strong problem-solving and analytical skills with a "client first" attitude Demonstrated ability to lead teams to successful outcomes Exceptional organizational skills and a deep understanding of project management best practices Demonstrated ability to balance competing priorities and exhibit flexibility based on changing client needs High level of business acumen, ability to develop and implement strategy Strong connector - make insightful connections to bring the right people together to solve problems and grow the business DESIRED SKILLS: Master's degree or higher (MBA, Masters in Data Science, Engineering, Computer Science or a related field) Prior experience running software development projects Experience with Defense Markets projects preferred Target salary range: $130,986 - $233,154 The salary range displayed represents the typical salary range for this position and is not a guarantee of compensation. Individual salaries are determined by various factors including, but not limited to location, internal equity, business considerations, client contract requirements, and candidate qualifications, such as education, experience, skills, and security clearances. #LI-SH1 LMI is an Equal Opportunity Employer. LMI is committed to the fair treatment of all and to our policy of providing applicants and employees with equal employment opportunities. LMI recruits, hires, trains, and promotes people without regard to race, color, religion, sex, sexual orientation, gender identity, national origin, pregnancy, disability, age, protected veteran status, citizenship status, genetic information, or any other characteristic protected by applicable federal, state, or local law. If you are a person with a disability needing assistance with the application process, please contact Colorado Residents: In any materials you submit, you may redact or remove age-identifying information such as age, date of birth, or dates of school attendance or graduation. You will not be penalized for redacting or removing this information. Need help finding the right job? We can recommend jobs specifically for you! Click here to get started.

Perform bench testing, acceptance testing, and verification on advanced power electronic systems. Troubleshoot and repair board-level and system-level electronic assemblies using expert diagnostic techniques. Develop and update test procedures, work instructions, and documentation aligned with ISO9001, AS9100, and IPC requirements. Build, maintain, and improve test fixtures, jigs, and setups to support reliability and throughput. Ensure proper calibration, readiness, and safe use of all test equipment. Accurately document test results, corrective actions, and repair activities. Mentor, coach, and support junior technicians, elevating team skill level and capability. Partner with Engineering & Manufacturing on root-cause analysis, continuous improvement, and product feedback. Maintain a clean, safe, organized, and quality-focused work environment. Responsibilities + Conduct bench testing, acceptance testing, and verification on advanced power electronic systems. + Troubleshoot and repair board-level and system-level electronic assemblies using diagnostic techniques. + Develop and update test procedures, work instructions, and documentation in line with ISO9001, AS9100, and IPC requirements. + Build, maintain, and improve test fixtures, jigs, and setups to support reliability and throughput. + Ensure proper calibration, readiness, and safe use of all test equipment. + Document test results, corrective actions, and repair activities accurately. + Mentor and coach junior technicians, enhancing team skill level and capability. + Collaborate with Engineering & Manufacturing on root-cause analysis, continuous improvement, and product feedback. + Maintain a clean, safe, organized, and quality-focused work environment. Essential Skills + Proficiency with lab and bench equipment such as oscilloscopes, multimeters, power supplies, and electronic loads. + Advanced understanding of electronic components, circuitry, and schematic interpretation. + Experience troubleshooting and repairing complex electronics at both the component and system level. + Familiarity with IPC standards and structured quality environments. + Experience with ISO9001/AS9100 quality systems or test-fixture development. Additional Skills & Qualifications + AA/AS degree in Electronics or related field, or equivalent professional experience. + 4-year technical degree or 5+ years of experience in power electronics testing and repair. + Experience in high-reliability sectors such as defense, aerospace, industrial, or medical. + Leadership development and mentoring skills. Work Environment The position involves hands-on work in a lab environment within a small company that offers a family-like atmosphere. The role provides opportunities to grow and mentor team members while working on highly technical, mission-critical power systems. The company culture is supportive, and the location offers a low cost of living. There is a career pathway toward roles such as Lead Technician, Test Engineering, or Manufacturing Engineering support Job Type & Location This is a Contract position based out of Murphy, NC. Pay and Benefits The pay range for this position is $35.00 - $45.00/hr. Eligibility requirements apply to some benefits and may depend on your job classification and length of employment. Benefits are subject to change and may be subject to specific elections, plan, or program terms. If eligible, the benefits available for this temporary role may include the following: - Medical, dental & vision - Critical Illness, Accident, and Hospital - 401(k) Retirement Plan - Pre-tax and Roth post-tax contributions available - Life Insurance (Voluntary Life & AD&D for the employee and dependents) - Short and long-term disability - Health Spending Account (HSA) - Transportation benefits - Employee Assistance Program - Time Off/Leave (PTO, Vacation or Sick Leave) Workplace Type This is a fully onsite position in Murphy,NC. Application Deadline This position is anticipated to close on Jan 30, 2026. About Actalent Actalent is a global leader in engineering and sciences services and talent solutions. We help visionary companies advance their engineering and science initiatives through access to specialized experts who drive scale, innovation and speed to market. With a network of almost 30,000 consultants and more than 4,500 clients across the U.S., Canada, Asia and Europe, Actalent serves many of the Fortune 500. The company is an equal opportunity employer and will consider all applications without regard to race, sex, age, color, religion, national origin, veteran status, disability, sexual orientation, gender identity, genetic information or any characteristic protected by law. If you would like to request a reasonable accommodation, such as the modification or adjustment of the job application process or interviewing due to a disability, please email actalentaccommodation@actalentservices.com (%20actalentaccommodation@actalentservices.com) for other accommodation options.

Objective The Harvard Companies include entities working to serve the business community in the janitorial and protection services areas. Harvard Maintenance and Harvard Protection are two of the largest and fastest growing, privately owned providers of high quality janitorial and security services in the United States. We are an industry leader and are well known for our innovative thinking and entrepreneurial spirit. Our success over the last fifty years stems from Harvard's Inverted Pyramid, which recognizes that our front-line employees are the most important people in our organization. The Inverted Pyramid ensures that our employees feel valued, are given the tools to be successful, and are empowered to execute in their roles. People are also at the center of our Core Values. Our People First core value clearly states that "we are a family organization that promotes respect and embraces diversity". Job Summary: Basic cleaning, including cleaning of all common areas, restrooms, entrances, elevators, walkways, windows, furniture, fixtures, stairs, chairs, tables, telephones, drinking fountains, trashing, dusting polishing and other assigned items/areas. We have multiple shifts available as well as both full time, part time and seasonal opportunities. Essential Duties and Responsibilities Responsible for all basic cleaning Cleaning of restrooms includes restocking toilet tissue and other dispensers, emptying trash, clean and sanitize fixtures, clean mirrors, spot clean partition doors and walls, sweep and mop tile floors, and clean toilets and urinals Move furniture, vacuum, reposition furniture, empty trash and replace liners Check all trash containers prior to moving it Cleaning includes dust mopping, damp mopping, sweeping, vacuuming, gum removal, dusting, picking up larger objects off the floor and spot cleaning glass Performs additional duties as required, including attending to flooded areas, incidental spills, and related clean-up work for trash and restroom concerns Restock carts and closets at the end of each shift Knowledge and Skill Requirements High School Diploma Minimum of 1 year experience Strong communication skills Must be willing to work assigned hours Compensation Harvard is offering a competitive salary $13.80 p/h structure including benefit package with medical, dental, life, and long-term disability (LTD) insurance along with 401K Savings Plan. An Equal Opportunity Employer --- M/F/D/V

We are seeking an Engineering Designer/Drafter to join our team in Abingdon, VA. This role is ideal for individuals who enjoy combining technical expertise with problem-solving to deliver safe, cost-effective, and reliable facility designs for residential, commercial, and industrial projects. As an Engineering Designer/Drafter, you will gain hands-on experience with design software, construction practices, and utility standards while supporting projects that directly impact safety, efficiency, and service reliability. This position offers opportunities to collaborate with cross-functional teams, build client relationships, and grow under the mentorship of experienced engineers and project leaders. Key Responsibilities: * Ensure strict adherence to all safety policies and procedures. * Apply codes, regulations, and company/client standards to design projects. * Prepare project/job packages including material lists, requisitions, labor estimates, and detailed drawings. * Develop proficiency in design software and work management tools. * Conduct site visits safely and effectively, interacting with field/construction personnel. * Evaluate electrical distribution equipment loading, such as transformers and fusing. * Learn utility construction practices across public right-of-way (ROW) and private property. * Communicate project status to meet client expectations and deadlines. * Maintain accurate and organized records, files, and documentation. * Build positive relationships with internal teams, external clients, and construction crews. * Support storm restoration activities as needed (Driver, Wire Down Sitter, or Clerk). * Perform other duties as assigned. Required Skills/Education: * Strong interpersonal skills with the ability to work across diverse teams and backgrounds. * Self-motivated, reliable, and detail-oriented with strong technical aptitude. * Excellent time management and organizational skills. * Strong communication skills, both written and verbal. * Proficiency with Microsoft Office Suite (Word, Excel, Outlook). * Ability to manage multiple tasks and meet deadlines. * Valid driver's license and reliable vehicle (mileage reimbursement may apply). * Willingness to learn, grow, and take direction from senior staff and mentors. About Seneca Resources At Seneca Resources, we are more than just a staffing and consulting firm-we are a trusted career partner. With offices across the U.S. and clients ranging from Fortune 500 companies to government organizations, we connect professionals with opportunities to advance their careers while making a meaningful impact. When you work with Seneca, you're choosing a company that invests in your success, celebrates your achievements, and supports your long-term goals. We offer competitive pay, comprehensive health, dental, and vision coverage, 401(k) retirement plans, and a dedicated team to advocate for you every step of the way. We are an Equal Opportunity Employer and value the strength that diversity brings to our workforce.